doc/building.html - toolchain/jdk/jdk21 - Gitiles

 <!DOCTYPE html>
 <html xmlns="http://www.w3.org/1999/xhtml" lang="" xml:lang="">
 <head>
   <meta charset="utf-8" />
   <meta name="generator" content="pandoc" />
   <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
   <title>Building the JDK</title>
   <style>
     code{white-space: pre-wrap;}
     span.smallcaps{font-variant: small-caps;}
     div.columns{display: flex; gap: min(4vw, 1.5em);}
     div.column{flex: auto; overflow-x: auto;}
     div.hanging-indent{margin-left: 1.5em; text-indent: -1.5em;}
     ul.task-list{list-style: none;}
     ul.task-list li input[type="checkbox"] {
       width: 0.8em;
       margin: 0 0.8em 0.2em -1.6em;
       vertical-align: middle;
     }
     .display.math{display: block; text-align: center; margin: 0.5rem auto;}
   </style>
   <link rel="stylesheet" href="../make/data/docs-resources/resources/jdk-default.css" />
   <style type="text/css">pre, code, tt { color: #1d6ae5; }</style>
   <!--[if lt IE 9]>
     <script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
   <![endif]-->
 </head>
 <body>
 <header id="title-block-header">
 <h1 class="title">Building the JDK</h1>
 </header>
 <nav id="TOC" role="doc-toc">
 <ul>
 <li><a href="#tldr-instructions-for-the-impatient"
 id="toc-tldr-instructions-for-the-impatient">TL;DR (Instructions for the
 Impatient)</a></li>
 <li><a href="#introduction" id="toc-introduction">Introduction</a></li>
 <li><a href="#getting-the-source-code"
 id="toc-getting-the-source-code">Getting the Source Code</a>
 <ul>
 <li><a href="#special-considerations"
 id="toc-special-considerations">Special Considerations</a></li>
 </ul></li>
 <li><a href="#build-hardware-requirements"
 id="toc-build-hardware-requirements">Build Hardware Requirements</a>
 <ul>
 <li><a href="#building-on-x86" id="toc-building-on-x86">Building on
 x86</a></li>
 <li><a href="#building-on-aarch64" id="toc-building-on-aarch64">Building
 on aarch64</a></li>
 <li><a href="#building-on-32-bit-arm"
 id="toc-building-on-32-bit-arm">Building on 32-bit arm</a></li>
 </ul></li>
 <li><a href="#operating-system-requirements"
 id="toc-operating-system-requirements">Operating System Requirements</a>
 <ul>
 <li><a href="#windows" id="toc-windows">Windows</a></li>
 <li><a href="#macos" id="toc-macos">macOS</a></li>
 <li><a href="#linux" id="toc-linux">Linux</a></li>
 <li><a href="#aix" id="toc-aix">AIX</a></li>
 </ul></li>
 <li><a href="#native-compiler-toolchain-requirements"
 id="toc-native-compiler-toolchain-requirements">Native Compiler
 (Toolchain) Requirements</a>
 <ul>
 <li><a href="#gcc" id="toc-gcc">gcc</a></li>
 <li><a href="#clang" id="toc-clang">clang</a></li>
 <li><a href="#apple-xcode" id="toc-apple-xcode">Apple Xcode</a></li>
 <li><a href="#microsoft-visual-studio"
 id="toc-microsoft-visual-studio">Microsoft Visual Studio</a></li>
 <li><a href="#ibm-xl-cc" id="toc-ibm-xl-cc">IBM XL C/C++</a></li>
 </ul></li>
 <li><a href="#boot-jdk-requirements" id="toc-boot-jdk-requirements">Boot
 JDK Requirements</a>
 <ul>
 <li><a href="#getting-jdk-binaries"
 id="toc-getting-jdk-binaries">Getting JDK binaries</a></li>
 </ul></li>
 <li><a href="#external-library-requirements"
 id="toc-external-library-requirements">External Library Requirements</a>
 <ul>
 <li><a href="#freetype" id="toc-freetype">FreeType</a></li>
 <li><a href="#fontconfig" id="toc-fontconfig">Fontconfig</a></li>
 <li><a href="#cups" id="toc-cups">CUPS</a></li>
 <li><a href="#x11" id="toc-x11">X11</a></li>
 <li><a href="#alsa" id="toc-alsa">ALSA</a></li>
 <li><a href="#libffi" id="toc-libffi">libffi</a></li>
 </ul></li>
 <li><a href="#build-tools-requirements"
 id="toc-build-tools-requirements">Build Tools Requirements</a>
 <ul>
 <li><a href="#autoconf" id="toc-autoconf">Autoconf</a></li>
 <li><a href="#gnu-make" id="toc-gnu-make">GNU Make</a></li>
 <li><a href="#gnu-bash" id="toc-gnu-bash">GNU Bash</a></li>
 </ul></li>
 <li><a href="#running-configure" id="toc-running-configure">Running
 Configure</a>
 <ul>
 <li><a href="#common-configure-arguments"
 id="toc-common-configure-arguments">Common Configure Arguments</a></li>
 <li><a href="#configure-control-variables"
 id="toc-configure-control-variables">Configure Control
 Variables</a></li>
 </ul></li>
 <li><a href="#running-make" id="toc-running-make">Running Make</a>
 <ul>
 <li><a href="#common-make-targets" id="toc-common-make-targets">Common
 Make Targets</a></li>
 <li><a href="#make-control-variables"
 id="toc-make-control-variables">Make Control Variables</a></li>
 </ul></li>
 <li><a href="#running-tests" id="toc-running-tests">Running
 Tests</a></li>
 <li><a href="#signing" id="toc-signing">Signing</a>
 <ul>
 <li><a href="#macos-1" id="toc-macos-1">macOS</a></li>
 </ul></li>
 <li><a href="#cross-compiling"
 id="toc-cross-compiling">Cross-compiling</a>
 <ul>
 <li><a href="#cross-compiling-the-easy-way-with-openjdk-devkits"
 id="toc-cross-compiling-the-easy-way-with-openjdk-devkits">Cross
 compiling the easy way with OpenJDK devkits</a></li>
 <li><a href="#boot-jdk-and-build-jdk"
 id="toc-boot-jdk-and-build-jdk">Boot JDK and Build JDK</a></li>
 <li><a href="#specifying-the-target-platform"
 id="toc-specifying-the-target-platform">Specifying the Target
 Platform</a></li>
 <li><a href="#toolchain-considerations"
 id="toc-toolchain-considerations">Toolchain Considerations</a></li>
 <li><a href="#native-libraries" id="toc-native-libraries">Native
 Libraries</a></li>
 <li><a href="#cross-compiling-with-debian-sysroots"
 id="toc-cross-compiling-with-debian-sysroots">Cross compiling with
 Debian sysroots</a></li>
 <li><a href="#building-for-armaarch64"
 id="toc-building-for-armaarch64">Building for ARM/aarch64</a></li>
 <li><a href="#building-for-risc-v" id="toc-building-for-risc-v">Building
 for RISC-V</a></li>
 <li><a href="#building-for-musl" id="toc-building-for-musl">Building for
 musl</a></li>
 <li><a href="#verifying-the-build"
 id="toc-verifying-the-build">Verifying the Build</a></li>
 </ul></li>
 <li><a href="#build-performance" id="toc-build-performance">Build
 Performance</a>
 <ul>
 <li><a href="#disk-speed" id="toc-disk-speed">Disk Speed</a></li>
 <li><a href="#virus-checking" id="toc-virus-checking">Virus
 Checking</a></li>
 <li><a href="#ccache" id="toc-ccache">Ccache</a></li>
 <li><a href="#precompiled-headers"
 id="toc-precompiled-headers">Precompiled Headers</a></li>
 <li><a href="#icecc-icecream" id="toc-icecc-icecream">Icecc /
 icecream</a></li>
 <li><a href="#using-the-javac-server"
 id="toc-using-the-javac-server">Using the javac server</a></li>
 <li><a href="#building-the-right-target"
 id="toc-building-the-right-target">Building the Right Target</a></li>
 </ul></li>
 <li><a href="#troubleshooting"
 id="toc-troubleshooting">Troubleshooting</a>
 <ul>
 <li><a href="#locating-the-source-of-the-error"
 id="toc-locating-the-source-of-the-error">Locating the Source of the
 Error</a></li>
 <li><a href="#fixing-unexpected-build-failures"
 id="toc-fixing-unexpected-build-failures">Fixing Unexpected Build
 Failures</a></li>
 <li><a href="#specific-build-issues"
 id="toc-specific-build-issues">Specific Build Issues</a></li>
 <li><a href="#getting-help" id="toc-getting-help">Getting Help</a></li>
 </ul></li>
 <li><a href="#reproducible-builds"
 id="toc-reproducible-builds">Reproducible Builds</a></li>
 <li><a href="#hints-and-suggestions-for-advanced-users"
 id="toc-hints-and-suggestions-for-advanced-users">Hints and Suggestions
 for Advanced Users</a>
 <ul>
 <li><a href="#bash-completion" id="toc-bash-completion">Bash
 Completion</a></li>
 <li><a href="#using-multiple-configurations"
 id="toc-using-multiple-configurations">Using Multiple
 Configurations</a></li>
 <li><a href="#handling-reconfigurations"
 id="toc-handling-reconfigurations">Handling Reconfigurations</a></li>
 <li><a href="#using-fine-grained-make-targets"
 id="toc-using-fine-grained-make-targets">Using Fine-Grained Make
 Targets</a></li>
 </ul></li>
 <li><a href="#understanding-the-build-system"
 id="toc-understanding-the-build-system">Understanding the Build
 System</a>
 <ul>
 <li><a href="#configurations"
 id="toc-configurations">Configurations</a></li>
 <li><a href="#build-output-structure"
 id="toc-build-output-structure">Build Output Structure</a></li>
 <li><a href="#fixpath" id="toc-fixpath">Fixpath</a></li>
 <li><a href="#native-debug-symbols" id="toc-native-debug-symbols">Native
 Debug Symbols</a></li>
 <li><a href="#autoconf-details" id="toc-autoconf-details">Autoconf
 Details</a></li>
 <li><a href="#developing-the-build-system-itself"
 id="toc-developing-the-build-system-itself">Developing the Build System
 Itself</a></li>
 </ul></li>
 <li><a href="#contributing-to-the-jdk"
 id="toc-contributing-to-the-jdk">Contributing to the JDK</a></li>
 <li><a href="#editing-this-document"
 id="toc-editing-this-document">Editing this document</a></li>
 </ul>
 </nav>
 <h2 id="tldr-instructions-for-the-impatient">TL;DR (Instructions for the
 Impatient)</h2>
 <p>If you are eager to try out building the JDK, these simple steps
 works most of the time. They assume that you have installed Git (and
 Cygwin if running on Windows) and cloned the top-level JDK repository
 that you want to build.</p>
 <ol type="1">
 <li><p><a href="#getting-the-source-code">Get the complete source
 code</a>:<br />
 <code>git clone https://git.openjdk.org/jdk/</code></p></li>
 <li><p><a href="#running-configure">Run configure</a>:<br />
 <code>bash configure</code></p>
 <p>If <code>configure</code> fails due to missing dependencies (to
 either the <a
 href="#native-compiler-toolchain-requirements">toolchain</a>, <a
 href="#build-tools-requirements">build tools</a>, <a
 href="#external-library-requirements">external libraries</a> or the <a
 href="#boot-jdk-requirements">boot JDK</a>), most of the time it prints
 a suggestion on how to resolve the situation on your platform. Follow
 the instructions, and try running <code>bash configure</code>
 again.</p></li>
 <li><p><a href="#running-make">Run make</a>:<br />
 <code>make images</code></p></li>
 <li><p>Verify your newly built JDK:<br />
 <code>./build/*/images/jdk/bin/java -version</code></p></li>
 <li><p><a href="##running-tests">Run basic tests</a>:<br />
 <code>make run-test-tier1</code></p></li>
 </ol>
 <p>If any of these steps failed, or if you want to know more about build
 requirements or build functionality, please continue reading this
 document.</p>
 <h2 id="introduction">Introduction</h2>
 <p>The JDK is a complex software project. Building it requires a certain
 amount of technical expertise, a fair number of dependencies on external
 software, and reasonably powerful hardware.</p>
 <p>If you just want to use the JDK and not build it yourself, this
 document is not for you. See for instance <a
 href="http://openjdk.org/install">OpenJDK installation</a> for some
 methods of installing a prebuilt JDK.</p>
 <h2 id="getting-the-source-code">Getting the Source Code</h2>
 <p>Make sure you are getting the correct version. As of JDK 10, the
 source is no longer split into separate repositories so you only need to
 clone one single repository. At the <a
 href="https://git.openjdk.org/">OpenJDK Git site</a> you can see a list
 of all available repositories. If you want to build an older version,
 e.g. JDK 11, it is recommended that you get the <code>jdk11u</code>
 repo, which contains incremental updates, instead of the
 <code>jdk11</code> repo, which was frozen at JDK 11 GA.</p>
 <p>If you are new to Git, a good place to start is the book <a
 href="https://git-scm.com/book/en/v2">Pro Git</a>. The rest of this
 document assumes a working knowledge of Git.</p>
 <h3 id="special-considerations">Special Considerations</h3>
 <p>For a smooth building experience, it is recommended that you follow
 these rules on where and how to check out the source code.</p>
 <ul>
 <li><p>Do not check out the source code in a path which contains spaces.
 Chances are the build will not work. This is most likely to be an issue
 on Windows systems.</p></li>
 <li><p>Do not check out the source code in a path which has a very long
 name or is nested many levels deep. Chances are you will hit an OS
 limitation during the build.</p></li>
 <li><p>Put the source code on a local disk, not a network share. If
 possible, use an SSD. The build process is very disk intensive, and
 having slow disk access will significantly increase build times. If you
 need to use a network share for the source code, see below for
 suggestions on how to keep the build artifacts on a local disk.</p></li>
 <li><p>On Windows, if using <a href="#cygwin">Cygwin</a>, extra care
 must be taken to make sure the environment is consistent. It is
 recommended that you follow this procedure:</p>
 <ul>
 <li><p>Create the directory that is going to contain the top directory
 of the JDK clone by using the <code>mkdir</code> command in the Cygwin
 bash shell. That is, do <em>not</em> create it using Windows Explorer.
 This will ensure that it will have proper Cygwin attributes, and that
 it's children will inherit those attributes.</p></li>
 <li><p>Do not put the JDK clone in a path under your Cygwin home
 directory. This is especially important if your user name contains
 spaces and/or mixed upper and lower case letters.</p></li>
 <li><p>You need to install a git client. You have two choices, Cygwin
 git or Git for Windows. Unfortunately there are pros and cons with each
 choice.</p>
 <ul>
 <li><p>The Cygwin <code>git</code> client has no line ending issues and
 understands Cygwin paths (which are used throughout the JDK build
 system). However, it does not currently work well with the Skara CLI
 tooling. Please see the <a
 href="https://wiki.openjdk.org/display/SKARA/Skara#Skara-Git">Skara wiki
 on Git clients</a> for up-to-date information about the Skara git client
 support.</p></li>
 <li><p>The <a href="https://gitforwindows.org">Git for Windows</a>
 client has issues with line endings, and do not understand Cygwin paths.
 It does work well with the Skara CLI tooling, however. To alleviate the
 line ending problems, make sure you set <code>core.autocrlf</code> to
 <code>false</code> (this is asked during installation).</p></li>
 </ul></li>
 </ul>
 <p>Failure to follow this procedure might result in hard-to-debug build
 problems.</p></li>
 </ul>
 <h2 id="build-hardware-requirements">Build Hardware Requirements</h2>
 <p>The JDK is a massive project, and require machines ranging from
 decent to powerful to be able to build in a reasonable amount of time,
 or to be able to complete a build at all.</p>
 <p>We <em>strongly</em> recommend usage of an SSD disk for the build,
 since disk speed is one of the limiting factors for build
 performance.</p>
 <h3 id="building-on-x86">Building on x86</h3>
 <p>At a minimum, a machine with 2-4 cores is advisable, as well as 2-4
 GB of RAM. (The more cores to use, the more memory you need.) At least 6
 GB of free disk space is required.</p>
 <p>Even for 32-bit builds, it is recommended to use a 64-bit build
 machine, and instead create a 32-bit target using
 <code>--with-target-bits=32</code>.</p>
 <p>Note: The Windows 32-bit x86 port is deprecated and may be removed in a future release.</p>
 <h3 id="building-on-aarch64">Building on aarch64</h3>
 <p>At a minimum, a machine with 8 cores is advisable, as well as 8 GB of
 RAM. (The more cores to use, the more memory you need.) At least 6 GB of
 free disk space is required.</p>
 <p>If you do not have access to sufficiently powerful hardware, it is
 also possible to use <a href="#cross-compiling">cross-compiling</a>.</p>
 <h4 id="branch-protection">Branch Protection</h4>
 <p>In order to use Branch Protection features in the VM,
 <code>--enable-branch-protection</code> must be used. This option
 requires C++ compiler support (GCC 9.1.0+ or Clang 10+). The resulting
 build can be run on both machines with and without support for branch
 protection in hardware. Branch Protection is only supported for Linux
 targets.</p>
 <h3 id="building-on-32-bit-arm">Building on 32-bit arm</h3>
 <p>This is not recommended. Instead, see the section on <a
 href="#cross-compiling">Cross-compiling</a>.</p>
 <h2 id="operating-system-requirements">Operating System
 Requirements</h2>
 <p>The mainline JDK project supports Linux, macOS, AIX and Windows.
 Support for other operating system, e.g. BSD, exists in separate "port"
 projects.</p>
 <p>In general, the JDK can be built on a wide range of versions of these
 operating systems, but the further you deviate from what is tested on a
 daily basis, the more likely you are to run into problems.</p>
 <p>This table lists the OS versions used by Oracle when building the
 JDK. Such information is always subject to change, but this table is up
 to date at the time of writing.</p>
 <table>
 <thead>
 <tr class="header">
 <th>Operating system</th>
 <th>Vendor/version used</th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
 <td>Linux</td>
 <td>Oracle Enterprise Linux 6.4 / 7.6</td>
 </tr>
 <tr class="even">
 <td>macOS</td>
 <td>Mac OS X 10.13 (High Sierra)</td>
 </tr>
 <tr class="odd">
 <td>Windows</td>
 <td>Windows Server 2012 R2</td>
 </tr>
 </tbody>
 </table>
 <p>The double version numbers for Linux are due to the hybrid model used
 at Oracle, where header files and external libraries from an older
 version are used when building on a more modern version of the OS.</p>
 <p>The Build Group has a wiki page with <a
 href="https://wiki.openjdk.org/display/Build/Supported+Build+Platforms">Supported
 Build Platforms</a>. From time to time, this is updated by contributors
 to list successes or failures of building on different platforms.</p>
 <h3 id="windows">Windows</h3>
 <p>Windows XP is not a supported platform, but all newer Windows should
 be able to build the JDK.</p>
 <p>On Windows, it is important that you pay attention to the
 instructions in the <a href="#special-considerations">Special
 Considerations</a>.</p>
 <p>Windows is the only non-POSIX OS supported by the JDK, and as such,
 requires some extra care. A POSIX support layer is required to build on
 Windows. Currently, the only supported such layers are Cygwin, Windows
 Subsystem for Linux (WSL), and MSYS2. (MSYS is no longer supported due
 to an outdated bash; While OpenJDK can be built with MSYS2, support for
 it is still experimental, so build failures and unusual errors are not
 uncommon.)</p>
 <p>Internally in the build system, all paths are represented as
 Unix-style paths, e.g. <code>/cygdrive/c/git/jdk/Makefile</code> rather
 than <code>C:\git\jdk\Makefile</code>. This rule also applies to input
 to the build system, e.g. in arguments to <code>configure</code>. So,
 use <code>--with-msvcr-dll=/cygdrive/c/msvcr100.dll</code> rather than
 <code>--with-msvcr-dll=c:\msvcr100.dll</code>. For details on this
 conversion, see the section on <a href="#fixpath">Fixpath</a>.</p>
 <p>Note: The Windows 32-bit x86 port is deprecated and may be removed in a future release.</p>
 <h4 id="cygwin">Cygwin</h4>
 <p>A functioning <a href="http://www.cygwin.com/">Cygwin</a> environment
 is required for building the JDK on Windows. If you have a 64-bit OS, we
 strongly recommend using the 64-bit version of Cygwin.</p>
 <p><strong>Note:</strong> Cygwin has a model of continuously updating
 all packages without any easy way to install or revert to a specific
 version of a package. This means that whenever you add or update a
 package in Cygwin, you might (inadvertently) update tools that are used
 by the JDK build process, and that can cause unexpected build
 problems.</p>
 <p>The JDK requires GNU Make 4.0 or greater in Cygwin. This is usually
 not a problem, since Cygwin currently only distributes GNU Make at a
 version above 4.0.</p>
 <p>Apart from the basic Cygwin installation, the following packages must
 also be installed:</p>
 <ul>
 <li><code>autoconf</code></li>
 <li><code>make</code></li>
 <li><code>zip</code></li>
 <li><code>unzip</code></li>
 </ul>
 <p>Often, you can install these packages using the following command
 line:</p>
 <pre><code>&lt;path to Cygwin setup&gt;/setup-x86_64 -q -P autoconf -P make -P unzip -P zip</code></pre>
 <p>Unfortunately, Cygwin can be unreliable in certain circumstances. If
 you experience build tool crashes or strange issues when building on
 Windows, please check the Cygwin FAQ on the <a
 href="https://cygwin.com/faq/faq.html#faq.using.bloda">"BLODA" list</a>
 and the section on <a
 href="https://cygwin.com/faq/faq.html#faq.using.fixing-fork-failures">fork()
 failures</a>.</p>
 <h4 id="windows-subsystem-for-linux-wsl">Windows Subsystem for Linux
 (WSL)</h4>
 <p>Windows 10 1809 or newer is supported due to a dependency on the
 wslpath utility and support for environment variable sharing through
 WSLENV. Version 1803 can work but intermittent build failures have been
 observed.</p>
 <p>It's possible to build both Windows and Linux binaries from WSL. To
 build Windows binaries, you must use a Windows boot JDK (located in a
 Windows-accessible directory). To build Linux binaries, you must use a
 Linux boot JDK. The default behavior is to build for Windows. To build
 for Linux, pass
 <code>--build=x86_64-unknown-linux-gnu --openjdk-target=x86_64-unknown-linux-gnu</code>
 to <code>configure</code>.</p>
 <p>If building Windows binaries, the source code must be located in a
 Windows- accessible directory. This is because Windows executables (such
 as Visual Studio and the boot JDK) must be able to access the source
 code. Also, the drive where the source is stored must be mounted as
 case-insensitive by changing either /etc/fstab or /etc/wsl.conf in WSL.
 Individual directories may be corrected using the fsutil tool in case
 the source was cloned before changing the mount options.</p>
 <p>Note that while it's possible to build on WSL, testing is still not
 fully supported.</p>
 <h3 id="macos">macOS</h3>
 <p>Apple is using a quite aggressive scheme of pushing OS updates, and
 coupling these updates with required updates of Xcode. Unfortunately,
 this makes it difficult for a project such as the JDK to keep pace with
 a continuously updated machine running macOS. See the section on <a
 href="#apple-xcode">Apple Xcode</a> on some strategies to deal with
 this.</p>
 <p>It is recommended that you use at least Mac OS X 10.13 (High Sierra).
 At the time of writing, the JDK has been successfully compiled on macOS
 10.12 (Sierra).</p>
 <p>The standard macOS environment contains the basic tooling needed to
 build, but for external libraries a package manager is recommended. The
 JDK uses <a href="https://brew.sh/">homebrew</a> in the examples, but
 feel free to use whatever manager you want (or none).</p>
 <h3 id="linux">Linux</h3>
 <p>It is often not much problem to build the JDK on Linux. The only
 general advice is to try to use the compilers, external libraries and
 header files as provided by your distribution.</p>
 <p>The basic tooling is provided as part of the core operating system,
 but you will most likely need to install developer packages.</p>
 <p>For apt-based distributions (Debian, Ubuntu, etc), try this:</p>
 <pre><code>sudo apt-get install build-essential</code></pre>
 <p>For rpm-based distributions (Fedora, Red Hat, etc), try this:</p>
 <pre><code>sudo yum groupinstall &quot;Development Tools&quot;</code></pre>
 <p>For Alpine Linux, aside from basic tooling, install the GNU versions
 of some programs:</p>
 <pre><code>sudo apk add build-base bash grep zip</code></pre>
 <h3 id="aix">AIX</h3>
 <p>Please consult the AIX section of the <a
 href="https://wiki.openjdk.org/display/Build/Supported+Build+Platforms">Supported
 Build Platforms</a> OpenJDK Build Wiki page for details about which
 versions of AIX are supported.</p>
 <h2 id="native-compiler-toolchain-requirements">Native Compiler
 (Toolchain) Requirements</h2>
 <p>Large portions of the JDK consists of native code, that needs to be
 compiled to be able to run on the target platform. In theory, toolchain
 and operating system should be independent factors, but in practice
 there's more or less a one-to-one correlation between target operating
 system and toolchain. There are ongoing efforts to loosen this strict
 coupling between compiler and operating system (see <a
 href="https://bugs.openjdk.org/browse/JDK-8288293">JDK-8288293</a>) but
 it will likely be a very long time before this goal can be realized.</p>
 <table>
 <thead>
 <tr class="header">
 <th>Operating system</th>
 <th>Supported toolchain</th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
 <td>Linux</td>
 <td>gcc, clang</td>
 </tr>
 <tr class="even">
 <td>macOS</td>
 <td>Apple Xcode (using clang)</td>
 </tr>
 <tr class="odd">
 <td>AIX</td>
 <td>IBM XL C/C++</td>
 </tr>
 <tr class="even">
 <td>Windows</td>
 <td>Microsoft Visual Studio</td>
 </tr>
 </tbody>
 </table>
 <p>Please see the individual sections on the toolchains for version
 recommendations. As a reference, these versions of the toolchains are
 used, at the time of writing, by Oracle for the daily builds of the JDK.
 It should be possible to compile the JDK with both older and newer
 versions, but the closer you stay to this list, the more likely you are
 to compile successfully without issues.</p>
 <table>
 <thead>
 <tr class="header">
 <th>Operating system</th>
 <th>Toolchain version</th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
 <td>Linux</td>
 <td>gcc 11.2.0</td>
 </tr>
 <tr class="even">
 <td>macOS</td>
 <td>Apple Xcode 10.1 (using clang 10.0.0)</td>
 </tr>
 <tr class="odd">
 <td>Windows</td>
 <td>Microsoft Visual Studio 2022 update 17.1.0</td>
 </tr>
 </tbody>
 </table>
 <p>All compilers are expected to be able to compile to the C99 language
 standard, as some C99 features are used in the source code. Microsoft
 Visual Studio doesn't fully support C99 so in practice shared code is
 limited to using C99 features that it does support.</p>
 <h3 id="gcc">gcc</h3>
 <p>The minimum accepted version of gcc is 5.0. Older versions will
 generate a warning by <code>configure</code> and are unlikely to
 work.</p>
 <p>The JDK is currently known to be able to compile with at least
 version 11.2 of gcc.</p>
 <p>In general, any version between these two should be usable.</p>
 <h3 id="clang">clang</h3>
 <p>The minimum accepted version of clang is 3.5. Older versions will not
 be accepted by <code>configure</code>.</p>
 <p>To use clang instead of gcc on Linux, use
 <code>--with-toolchain-type=clang</code>.</p>
 <h3 id="apple-xcode">Apple Xcode</h3>
 <p>The oldest supported version of Xcode is 8.</p>
 <p>You will need the Xcode command line developer tools to be able to
 build the JDK. (Actually, <em>only</em> the command line tools are
 needed, not the IDE.) The simplest way to install these is to run:</p>
 <pre><code>xcode-select --install</code></pre>
 <p>When updating Xcode, it is advisable to keep an older version for
 building the JDK. To use a specific version of Xcode you have multiple
 options:</p>
 <ul>
 <li>Use <code>xcode-select -s</code> before running
 <code>configure</code>, e.g.
 <code>xcode-select -s /Applications/Xcode13.1.app</code>. The drawback
 is that the setting is system wide and you may have to revert it after
 an OpenJDK build.</li>
 <li>Use configure option <code>--with-xcode-path</code>, e.g.
 <code>configure --with-xcode-path=/Applications/Xcode13.1.app</code>
 This allows using a specific Xcode version for an OpenJDK build,
 independently of the active Xcode version by
 <code>xcode-select</code>.</li>
 </ul>
 <p>If you have recently (inadvertently) updated your OS and/or Xcode
 version, and the JDK can no longer be built, please see the section on
 <a href="#problems-with-the-build-environment">Problems with the Build
 Environment</a>, and <a href="#getting-help">Getting Help</a> to find
 out if there are any recent, non-merged patches available for this
 update.</p>
 <h3 id="microsoft-visual-studio">Microsoft Visual Studio</h3>
 <p>The minimum accepted version is Visual Studio 2019 version 16.8.
 (Note that this version is often presented as "MSVC 14.28", and reported
 by cl.exe as 19.28.) Older versions will not be accepted by
 <code>configure</code> and will not work. The maximum accepted version
 of Visual Studio is 2022.</p>
 <p>If you have multiple versions of Visual Studio installed,
 <code>configure</code> will by default pick the latest. You can request
 a specific version to be used by setting
 <code>--with-toolchain-version</code>, e.g.
 <code>--with-toolchain-version=2022</code>.</p>
 <p>If you have Visual Studio installed but <code>configure</code> fails
 to detect it, it may be because of <a href="#spaces-in-path">spaces in
 path</a>.</p>
 <h3 id="ibm-xl-cc">IBM XL C/C++</h3>
 <p>Please consult the AIX section of the <a
 href="https://wiki.openjdk.org/display/Build/Supported+Build+Platforms">Supported
 Build Platforms</a> OpenJDK Build Wiki page for details about which
 versions of XLC are supported.</p>
 <h2 id="boot-jdk-requirements">Boot JDK Requirements</h2>
 <p>Paradoxically, building the JDK requires a pre-existing JDK. This is
 called the "boot JDK". The boot JDK does not, however, have to be a JDK
 built directly from the source code available in the OpenJDK Community.
 If you are porting the JDK to a new platform, chances are that there
 already exists another JDK for that platform that is usable as boot
 JDK.</p>
 <p>The rule of thumb is that the boot JDK for building JDK major version
 <em>N</em> should be a JDK of major version <em>N-1</em>, so for
 building JDK 9 a JDK 8 would be suitable as boot JDK. However, the JDK
 should be able to "build itself", so an up-to-date build of the current
 JDK source is an acceptable alternative. If you are following the
 <em>N-1</em> rule, make sure you've got the latest update version, since
 JDK 8 GA might not be able to build JDK 9 on all platforms.</p>
 <p>Early in the release cycle, version <em>N-1</em> may not yet have
 been released. In that case, the preferred boot JDK will be version
 <em>N-2</em> until version <em>N-1</em> is available.</p>
 <p>If the boot JDK is not automatically detected, or the wrong JDK is
 picked, use <code>--with-boot-jdk</code> to point to the JDK to use.</p>
 <h3 id="getting-jdk-binaries">Getting JDK binaries</h3>
 <p>JDK binaries for Linux, Windows and macOS can be downloaded from <a
 href="http://jdk.java.net">jdk.java.net</a>. An alternative is to
 download the <a
 href="http://www.oracle.com/technetwork/java/javase/downloads">Oracle
 JDK</a>. Another is the <a href="https://adoptopenjdk.net/">Adopt
 OpenJDK Project</a>, which publishes experimental prebuilt binaries for
 various platforms.</p>
 <p>On Linux you can also get a JDK from the Linux distribution. On
 apt-based distros (like Debian and Ubuntu),
 <code>sudo apt-get install openjdk-&lt;VERSION&gt;-jdk</code> is
 typically enough to install a JDK &lt;VERSION&gt;. On rpm-based distros
 (like Fedora and Red Hat), try
 <code>sudo yum install java-&lt;VERSION&gt;-openjdk-devel</code>.</p>
 <h2 id="external-library-requirements">External Library
 Requirements</h2>
 <p>Different platforms require different external libraries. In general,
 libraries are not optional - that is, they are either required or not
 used.</p>
 <p>If a required library is not detected by <code>configure</code>, you
 need to provide the path to it. There are two forms of the
 <code>configure</code> arguments to point to an external library:
 <code>--with-&lt;LIB&gt;=&lt;path&gt;</code> or
 <code>--with-&lt;LIB&gt;-include=&lt;path to include&gt; --with-&lt;LIB&gt;-lib=&lt;path to lib&gt;</code>.
 The first variant is more concise, but require the include files and
 library files to reside in a default hierarchy under this directory. In
 most cases, it works fine.</p>
 <p>As a fallback, the second version allows you to point to the include
 directory and the lib directory separately.</p>
 <h3 id="freetype">FreeType</h3>
 <p>FreeType2 from <a href="http://www.freetype.org/">The FreeType
 Project</a> is not required on any platform. The exception is on
 Unix-based platforms when configuring such that the build artifacts will
 reference a system installed library, rather than bundling the JDK's own
 copy.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     libfreetype6-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     freetype-devel</code>.</li>
 <li>To install on Alpine Linux, try running
 <code>sudo apk add freetype-dev</code>.</li>
 <li>To install on macOS, try running
 <code>brew install freetype</code>.</li>
 </ul>
 <p>Use <code>--with-freetype-include=&lt;path&gt;</code> and
 <code>--with-freetype-lib=&lt;path&gt;</code> if <code>configure</code>
 does not automatically locate the platform FreeType files.</p>
 <h3 id="fontconfig">Fontconfig</h3>
 <p>Fontconfig from <a href="http://fontconfig.org">freedesktop.org
 Fontconfig</a> is required on all platforms except Windows and
 macOS.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     libfontconfig-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     fontconfig-devel</code>.</li>
 </ul>
 <p>Use <code>--with-fontconfig-include=&lt;path&gt;</code> and
 <code>--with-fontconfig=&lt;path&gt;</code> if <code>configure</code>
 does not automatically locate the platform Fontconfig files.</p>
 <h3 id="cups">CUPS</h3>
 <p>CUPS, <a href="http://www.cups.org">Common UNIX Printing System</a>
 header files are required on all platforms, except Windows. Often these
 files are provided by your operating system.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     libcups2-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     cups-devel</code>.</li>
 <li>To install on Alpine Linux, try running
 <code>sudo apk add cups-dev</code>.</li>
 </ul>
 <p>Use <code>--with-cups=&lt;path&gt;</code> if <code>configure</code>
 does not properly locate your CUPS files.</p>
 <h3 id="x11">X11</h3>
 <p>Certain <a href="http://www.x.org/">X11</a> libraries and include
 files are required on Linux.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     libx11-dev libxext-dev libxrender-dev libxrandr-dev libxtst-dev libxt-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     libXtst-devel libXt-devel libXrender-devel libXrandr-devel libXi-devel</code>.</li>
 <li>To install on Alpine Linux, try running
 <code>sudo apk add libx11-dev     libxext-dev libxrender-dev libxrandr-dev libxtst-dev libxt-dev</code>.</li>
 </ul>
 <p>Use <code>--with-x=&lt;path&gt;</code> if <code>configure</code> does
 not properly locate your X11 files.</p>
 <h3 id="alsa">ALSA</h3>
 <p>ALSA, <a href="https://www.alsa-project.org/">Advanced Linux Sound
 Architecture</a> is required on Linux. At least version 0.9.1 of ALSA is
 required.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     libasound2-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     alsa-lib-devel</code>.</li>
 <li>To install on Alpine Linux, try running
 <code>sudo apk add alsa-lib-dev</code>.</li>
 </ul>
 <p>Use <code>--with-alsa=&lt;path&gt;</code> if <code>configure</code>
 does not properly locate your ALSA files.</p>
 <h3 id="libffi">libffi</h3>
 <p>libffi, the <a href="http://sourceware.org/libffi">Portable Foreign
 Function Interface Library</a> is required when building the Zero
 version of Hotspot.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     libffi-dev</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     libffi-devel</code>.</li>
 <li>To install on Alpine Linux, try running
 <code>sudo apk add libffi-dev</code>.</li>
 </ul>
 <p>Use <code>--with-libffi=&lt;path&gt;</code> if <code>configure</code>
 does not properly locate your libffi files.</p>
 <h2 id="build-tools-requirements">Build Tools Requirements</h2>
 <h3 id="autoconf">Autoconf</h3>
 <p>The JDK requires <a
 href="http://www.gnu.org/software/autoconf">Autoconf</a> on all
 platforms. At least version 2.69 is required.</p>
 <ul>
 <li>To install on an apt-based Linux, try running
 <code>sudo apt-get install     autoconf</code>.</li>
 <li>To install on an rpm-based Linux, try running
 <code>sudo yum install     autoconf</code>.</li>
 <li>To install on Alpine Linux, try running
 <code>sudo apk add autoconf</code>.</li>
 <li>To install on macOS, try running
 <code>brew install autoconf</code>.</li>
 <li>To install on Windows, try running
 <code>&lt;path to Cygwin setup&gt;/setup-x86_64 -q     -P autoconf</code>.</li>
 </ul>
 <p>If <code>configure</code> has problems locating your installation of
 autoconf, you can specify it using the <code>AUTOCONF</code> environment
 variable, like this:</p>
 <pre><code>AUTOCONF=&lt;path to autoconf&gt; configure ...</code></pre>
 <h3 id="gnu-make">GNU Make</h3>
 <p>The JDK requires <a href="http://www.gnu.org/software/make">GNU
 Make</a>. No other flavors of make are supported.</p>
 <p>At least version 3.81 of GNU Make must be used. For distributions
 supporting GNU Make 4.0 or above, we strongly recommend it. GNU Make 4.0
 contains useful functionality to handle parallel building (supported by
 <code>--with-output-sync</code>) and speed and stability
 improvements.</p>
 <p>Note that <code>configure</code> locates and verifies a properly
 functioning version of <code>make</code> and stores the path to this
 <code>make</code> binary in the configuration. If you start a build
 using <code>make</code> on the command line, you will be using the
 version of make found first in your <code>PATH</code>, and not
 necessarily the one stored in the configuration. This initial make will
 be used as "bootstrap make", and in a second stage, the make located by
 <code>configure</code> will be called. Normally, this will present no
 issues, but if you have a very old <code>make</code>, or a non-GNU Make
 <code>make</code> in your path, this might cause issues.</p>
 <p>If you want to override the default make found by
 <code>configure</code>, use the <code>MAKE</code> configure variable,
 e.g. <code>configure MAKE=/opt/gnu/make</code>.</p>
 <h3 id="gnu-bash">GNU Bash</h3>
 <p>The JDK requires <a href="http://www.gnu.org/software/bash">GNU
 Bash</a>. No other shells are supported.</p>
 <p>At least version 3.2 of GNU Bash must be used.</p>
 <h2 id="running-configure">Running Configure</h2>
 <p>To build the JDK, you need a "configuration", which consists of a
 directory where to store the build output, coupled with information
 about the platform, the specific build machine, and choices that affect
 how the JDK is built.</p>
 <p>The configuration is created by the <code>configure</code> script.
 The basic invocation of the <code>configure</code> script looks like
 this:</p>
 <pre><code>bash configure [options]</code></pre>
 <p>This will create an output directory containing the configuration and
 setup an area for the build result. This directory typically looks like
 <code>build/linux-x64-server-release</code>, but the actual name depends
 on your specific configuration. (It can also be set directly, see <a
 href="#using-multiple-configurations">Using Multiple
 Configurations</a>). This directory is referred to as
 <code>$BUILD</code> in this documentation.</p>
 <p><code>configure</code> will try to figure out what system you are
 running on and where all necessary build components are. If you have all
 prerequisites for building installed, it should find everything. If it
 fails to detect any component automatically, it will exit and inform you
 about the problem.</p>
 <p>Some command line examples:</p>
 <ul>
 <li><p>Create a 32-bit build for Windows with FreeType2 in
 <code>C:\freetype-i586</code>:
 <code>bash configure --with-freetype=/cygdrive/c/freetype-i586 --with-target-bits=32</code></p></li>
 <li><p>Create a debug build with the <code>server</code> JVM and DTrace
 enabled:
 <code>bash configure --enable-debug --with-jvm-variants=server --enable-dtrace</code></p></li>
 </ul>
 <h3 id="common-configure-arguments">Common Configure Arguments</h3>
 <p>Here follows some of the most common and important
 <code>configure</code> argument.</p>
 <p>To get up-to-date information on <em>all</em> available
 <code>configure</code> argument, please run:</p>
 <pre><code>bash configure --help</code></pre>
 <p>(Note that this help text also include general autoconf options, like
 <code>--dvidir</code>, that is not relevant to the JDK. To list only
 JDK-specific features, use <code>bash configure --help=short</code>
 instead.)</p>
 <h4 id="configure-arguments-for-tailoring-the-build">Configure Arguments
 for Tailoring the Build</h4>
 <ul>
 <li><code>--enable-debug</code> - Set the debug level to
 <code>fastdebug</code> (this is a shorthand for
 <code>--with-debug-level=fastdebug</code>)</li>
 <li><code>--with-debug-level=&lt;level&gt;</code> - Set the debug level,
 which can be <code>release</code>, <code>fastdebug</code>,
 <code>slowdebug</code> or <code>optimized</code>. Default is
 <code>release</code>. <code>optimized</code> is variant of
 <code>release</code> with additional Hotspot debug code.</li>
 <li><code>--with-native-debug-symbols=&lt;method&gt;</code> - Specify if
 and how native debug symbols should be built. Available methods are
 <code>none</code>, <code>internal</code>, <code>external</code>,
 <code>zipped</code>. Default behavior depends on platform. See <a
 href="#native-debug-symbols">Native Debug Symbols</a> for more
 details.</li>
 <li><code>--with-version-string=&lt;string&gt;</code> - Specify the
 version string this build will be identified with.</li>
 <li><code>--with-version-&lt;part&gt;=&lt;value&gt;</code> - A group of
 options, where <code>&lt;part&gt;</code> can be any of <code>pre</code>,
 <code>opt</code>, <code>build</code>, <code>major</code>,
 <code>minor</code>, <code>security</code> or <code>patch</code>. Use
 these options to modify just the corresponding part of the version
 string from the default, or the value provided by
 <code>--with-version-string</code>.</li>
 <li><code>--with-jvm-variants=&lt;variant&gt;[,&lt;variant&gt;...]</code>
 - Build the specified variant (or variants) of Hotspot. Valid variants
 are: <code>server</code>, <code>client</code>, <code>minimal</code>,
 <code>core</code>, <code>zero</code>, <code>custom</code>. Note that not
 all variants are possible to combine in a single build.</li>
 <li><code>--enable-jvm-feature-&lt;feature&gt;</code> or
 <code>--disable-jvm-feature-&lt;feature&gt;</code> - Include (or
 exclude) <code>&lt;feature&gt;</code> as a JVM feature in Hotspot. You
 can also specify a list of features to be enabled, separated by space or
 comma, as
 <code>--with-jvm-features=&lt;feature&gt;[,&lt;feature&gt;...]</code>.
 If you prefix <code>&lt;feature&gt;</code> with a <code>-</code>, it
 will be disabled. These options will modify the default list of features
 for the JVM variant(s) you are building. For the <code>custom</code> JVM
 variant, the default list is empty. A complete list of valid JVM
 features can be found using <code>bash configure --help</code>.</li>
 <li><code>--with-target-bits=&lt;bits&gt;</code> - Create a target
 binary suitable for running on a <code>&lt;bits&gt;</code> platform. Use
 this to create 32-bit output on a 64-bit build platform, instead of
 doing a full cross-compile. (This is known as a <em>reduced</em>
 build.)</li>
 </ul>
 <p>On Linux, BSD and AIX, it is possible to override where Java by
 default searches for runtime/JNI libraries. This can be useful in
 situations where there is a special shared directory for system JNI
 libraries. This setting can in turn be overridden at runtime by setting
 the <code>java.library.path</code> property.</p>
 <ul>
 <li><code>--with-jni-libpath=&lt;path&gt;</code> - Use the specified
 path as a default when searching for runtime libraries.</li>
 </ul>
 <h4 id="configure-arguments-for-native-compilation">Configure Arguments
 for Native Compilation</h4>
 <ul>
 <li><code>--with-devkit=&lt;path&gt;</code> - Use this devkit for
 compilers, tools and resources</li>
 <li><code>--with-sysroot=&lt;path&gt;</code> - Use this directory as
 sysroot</li>
 <li><code>--with-extra-path=&lt;path&gt;[;&lt;path&gt;]</code> - Prepend
 these directories to the default path when searching for all kinds of
 binaries</li>
 <li><code>--with-toolchain-path=&lt;path&gt;[;&lt;path&gt;]</code> -
 Prepend these directories when searching for toolchain binaries
 (compilers etc)</li>
 <li><code>--with-extra-cflags=&lt;flags&gt;</code> - Append these flags
 when compiling JDK C files</li>
 <li><code>--with-extra-cxxflags=&lt;flags&gt;</code> - Append these
 flags when compiling JDK C++ files</li>
 <li><code>--with-extra-ldflags=&lt;flags&gt;</code> - Append these flags
 when linking JDK libraries</li>
 </ul>
 <h4 id="configure-arguments-for-external-dependencies">Configure
 Arguments for External Dependencies</h4>
 <ul>
 <li><code>--with-boot-jdk=&lt;path&gt;</code> - Set the path to the <a
 href="#boot-jdk-requirements">Boot JDK</a></li>
 <li><code>--with-freetype=&lt;path&gt;</code> - Set the path to <a
 href="#freetype">FreeType</a></li>
 <li><code>--with-cups=&lt;path&gt;</code> - Set the path to <a
 href="#cups">CUPS</a></li>
 <li><code>--with-x=&lt;path&gt;</code> - Set the path to <a
 href="#x11">X11</a></li>
 <li><code>--with-alsa=&lt;path&gt;</code> - Set the path to <a
 href="#alsa">ALSA</a></li>
 <li><code>--with-libffi=&lt;path&gt;</code> - Set the path to <a
 href="#libffi">libffi</a></li>
 <li><code>--with-jtreg=&lt;path&gt;</code> - Set the path to JTReg. See
 <a href="#running-tests">Running Tests</a></li>
 </ul>
 <p>Certain third-party libraries used by the JDK (libjpeg, giflib,
 libpng, lcms and zlib) are included in the JDK repository. The default
 behavior of the JDK build is to use the included ("bundled") versions of
 libjpeg, giflib, libpng and lcms. For zlib, the system lib (if present)
 is used except on Windows and AIX. However the bundled libraries may be
 replaced by an external version. To do so, specify <code>system</code>
 as the <code>&lt;source&gt;</code> option in these arguments. (The
 default is <code>bundled</code>).</p>
 <ul>
 <li><code>--with-libjpeg=&lt;source&gt;</code> - Use the specified
 source for libjpeg</li>
 <li><code>--with-giflib=&lt;source&gt;</code> - Use the specified source
 for giflib</li>
 <li><code>--with-libpng=&lt;source&gt;</code> - Use the specified source
 for libpng</li>
 <li><code>--with-lcms=&lt;source&gt;</code> - Use the specified source
 for lcms</li>
 <li><code>--with-zlib=&lt;source&gt;</code> - Use the specified source
 for zlib</li>
 </ul>
 <p>On Linux, it is possible to select either static or dynamic linking
 of the C++ runtime. The default is static linking, with dynamic linking
 as fallback if the static library is not found.</p>
 <ul>
 <li><code>--with-stdc++lib=&lt;method&gt;</code> - Use the specified
 method (<code>static</code>, <code>dynamic</code> or
 <code>default</code>) for linking the C++ runtime.</li>
 </ul>
 <h3 id="configure-control-variables">Configure Control Variables</h3>
 <p>It is possible to control certain aspects of <code>configure</code>
 by overriding the value of <code>configure</code> variables, either on
 the command line or in the environment.</p>
 <p>Normally, this is <strong>not recommended</strong>. If used
 improperly, it can lead to a broken configuration. Unless you're well
 versed in the build system, this is hard to use properly. Therefore,
 <code>configure</code> will print a warning if this is detected.</p>
 <p>However, there are a few <code>configure</code> variables, known as
 <em>control variables</em> that are supposed to be overridden on the
 command line. These are variables that describe the location of tools
 needed by the build, like <code>MAKE</code> or <code>GREP</code>. If any
 such variable is specified, <code>configure</code> will use that value
 instead of trying to autodetect the tool. For instance,
 <code>bash configure MAKE=/opt/gnumake4.0/bin/make</code>.</p>
 <p>If a configure argument exists, use that instead, e.g. use
 <code>--with-jtreg</code> instead of setting <code>JTREGEXE</code>.</p>
 <p>Also note that, despite what autoconf claims, setting
 <code>CFLAGS</code> will not accomplish anything. Instead use
 <code>--with-extra-cflags</code> (and similar for <code>cxxflags</code>
 and <code>ldflags</code>).</p>
 <h2 id="running-make">Running Make</h2>
 <p>When you have a proper configuration, all you need to do to build the
 JDK is to run <code>make</code>. (But see the warning at <a
 href="#gnu-make">GNU Make</a> about running the correct version of
 make.)</p>
 <p>When running <code>make</code> without any arguments, the default
 target is used, which is the same as running <code>make default</code>
 or <code>make jdk</code>. This will build a minimal (or roughly minimal)
 set of compiled output (known as an "exploded image") needed for a
 developer to actually execute the newly built JDK. The idea is that in
 an incremental development fashion, when doing a normal make, you should
 only spend time recompiling what's changed (making it purely
 incremental) and only do the work that's needed to actually run and test
 your code.</p>
 <p>The output of the exploded image resides in <code>$BUILD/jdk</code>.
 You can test the newly built JDK like this:
 <code>$BUILD/jdk/bin/java -version</code>.</p>
 <h3 id="common-make-targets">Common Make Targets</h3>
 <p>Apart from the default target, here are some common make targets:</p>
 <ul>
 <li><code>hotspot</code> - Build all of hotspot (but only hotspot)</li>
 <li><code>hotspot-&lt;variant&gt;</code> - Build just the specified jvm
 variant</li>
 <li><code>images</code> or <code>product-images</code> - Build the JDK
 image</li>
 <li><code>docs</code> or <code>docs-image</code> - Build the
 documentation image</li>
 <li><code>test-image</code> - Build the test image</li>
 <li><code>all</code> or <code>all-images</code> - Build all images
 (product, docs and test)</li>
 <li><code>bootcycle-images</code> - Build images twice, second time with
 newly built JDK (good for testing)</li>
 <li><code>clean</code> - Remove all files generated by make, but not
 those generated by configure</li>
 <li><code>dist-clean</code> - Remove all files, including
 configuration</li>
 </ul>
 <p>Run <code>make help</code> to get an up-to-date list of important
 make targets and make control variables.</p>
 <p>It is possible to build just a single module, a single phase, or a
 single phase of a single module, by creating make targets according to
 these followin patterns. A phase can be either of <code>gensrc</code>,
 <code>gendata</code>, <code>copy</code>, <code>java</code>,
 <code>launchers</code>, or <code>libs</code>. See <a
 href="#using-fine-grained-make-targets">Using Fine-Grained Make
 Targets</a> for more details about this functionality.</p>
 <ul>
 <li><code>&lt;phase&gt;</code> - Build the specified phase and
 everything it depends on</li>
 <li><code>&lt;module&gt;</code> - Build the specified module and
 everything it depends on</li>
 <li><code>&lt;module&gt;-&lt;phase&gt;</code> - Compile the specified
 phase for the specified module and everything it depends on</li>
 </ul>
 <p>Similarly, it is possible to clean just a part of the build by
 creating make targets according to these patterns:</p>
 <ul>
 <li><code>clean-&lt;outputdir&gt;</code> - Remove the subdir in the
 output dir with the name</li>
 <li><code>clean-&lt;phase&gt;</code> - Remove all build results related
 to a certain build phase</li>
 <li><code>clean-&lt;module&gt;</code> - Remove all build results related
 to a certain module</li>
 <li><code>clean-&lt;module&gt;-&lt;phase&gt;</code> - Remove all build
 results related to a certain module and phase</li>
 </ul>
 <h3 id="make-control-variables">Make Control Variables</h3>
 <p>It is possible to control <code>make</code> behavior by overriding
 the value of <code>make</code> variables, either on the command line or
 in the environment.</p>
 <p>Normally, this is <strong>not recommended</strong>. If used
 improperly, it can lead to a broken build. Unless you're well versed in
 the build system, this is hard to use properly. Therefore,
 <code>make</code> will print a warning if this is detected.</p>
 <p>However, there are a few <code>make</code> variables, known as
 <em>control variables</em> that are supposed to be overridden on the
 command line. These make up the "make time" configuration, as opposed to
 the "configure time" configuration.</p>
 <h4 id="general-make-control-variables">General Make Control
 Variables</h4>
 <ul>
 <li><code>JOBS</code> - Specify the number of jobs to build with. See <a
 href="#build-performance">Build Performance</a>.</li>
 <li><code>LOG</code> - Specify the logging level and functionality. See
 <a href="#checking-the-build-log-file">Checking the Build Log
 File</a></li>
 <li><code>CONF</code> and <code>CONF_NAME</code> - Selecting the
 configuration(s) to use. See <a
 href="#using-multiple-configurations">Using Multiple
 Configurations</a></li>
 </ul>
 <h4 id="test-make-control-variables">Test Make Control Variables</h4>
 <p>These make control variables only make sense when running tests.
 Please see <strong>Testing the JDK</strong> (<a
 href="testing.html">html</a>, <a href="testing.md">markdown</a>) for
 details.</p>
 <ul>
 <li><code>TEST</code></li>
 <li><code>TEST_JOBS</code></li>
 <li><code>JTREG</code></li>
 <li><code>GTEST</code></li>
 </ul>
 <h4 id="advanced-make-control-variables">Advanced Make Control
 Variables</h4>
 <p>These advanced make control variables can be potentially unsafe. See
 <a href="#hints-and-suggestions-for-advanced-users">Hints and
 Suggestions for Advanced Users</a> and <a
 href="#understanding-the-build-system">Understanding the Build
 System</a> for details.</p>
 <ul>
 <li><code>SPEC</code></li>
 <li><code>CONF_CHECK</code></li>
 <li><code>COMPARE_BUILD</code></li>
 <li><code>JDK_FILTER</code></li>
 <li><code>SPEC_FILTER</code></li>
 </ul>
 <h2 id="running-tests">Running Tests</h2>
 <p>Most of the JDK tests are using the <a
 href="http://openjdk.org/jtreg">JTReg</a> test framework. Make sure that
 your configuration knows where to find your installation of JTReg. If
 this is not picked up automatically, use the
 <code>--with-jtreg=&lt;path to jtreg home&gt;</code> option to point to
 the JTReg framework. Note that this option should point to the JTReg
 home, i.e. the top directory, containing <code>lib/jtreg.jar</code>
 etc.</p>
 <p>The <a href="https://wiki.openjdk.org/display/Adoption">Adoption
 Group</a> provides recent builds of jtreg <a
 href="https://ci.adoptium.net/view/Dependencies/job/dependency_pipeline/lastSuccessfulBuild/artifact/jtreg/">here</a>.
 Download the latest <code>.tar.gz</code> file, unpack it, and point
 <code>--with-jtreg</code> to the <code>jtreg</code> directory that you
 just unpacked.</p>
 <p>Building of Hotspot Gtest suite requires the source code of Google
 Test framework. The top directory, which contains both
 <code>googletest</code> and <code>googlemock</code> directories, should
 be specified via <code>--with-gtest</code>. The minimum supported
 version of Google Test is 1.13.0, whose source code can be obtained:</p>
 <ul>
 <li>by downloading and unpacking the source bundle from <a
 href="https://github.com/google/googletest/releases/tag/v1.13.0">here</a></li>
 <li>or by checking out <code>v1.13.0</code> tag of
 <code>googletest</code> project:
 <code>git clone -b v1.13.0 https://github.com/google/googletest</code></li>
 </ul>
 <p>To execute the most basic tests (tier 1), use:</p>
 <pre><code>make run-test-tier1</code></pre>
 <p>For more details on how to run tests, please see <strong>Testing the
 JDK</strong> (<a href="testing.html">html</a>, <a
 href="testing.md">markdown</a>).</p>
 <h2 id="signing">Signing</h2>
 <h3 id="macos-1">macOS</h3>
 <p>Modern versions of macOS require applications to be signed and
 notarizied before distribution. See Apple's documentation for more
 background on what this means and how it works. To help support this,
 the JDK build can be configured to automatically sign all native
 binaries, and the JDK bundle, with all the options needed for successful
 notarization, as well as all the entitlements required by the JDK. To
 enable <code>hardened</code> signing, use configure parameter
 <code>--with-macosx-codesign=hardened</code> and configure the signing
 identity you wish to use with
 <code>--with-macosx-codesign-identity=&lt;identity&gt;</code>. The
 identity refers to a signing identity from Apple that needs to be
 preinstalled on the build host.</p>
 <p>When not signing for distribution with the hardened option, the JDK
 build will still attempt to perform <code>adhoc</code> signing to add
 the special entitlement <code>com.apple.security.get-task-allow</code>
 to each binary. This entitlement is required to be able to dump core
 files from a process. Note that adding this entitlement makes the build
 invalid for notarization, so it is only added when signing in
 <code>debug</code> mode. To explicitly enable this kind of adhoc
 signing, use configure parameter
 <code>--with-macosx-codesign=debug</code>. It will be enabled by default
 in most cases.</p>
 <p>It's also possible to completely disable any explicit codesign
 operations done by the JDK build using the configure parameter
 <code>--without-macosx-codesign</code>. The exact behavior then depends
 on the architecture. For macOS on x64, it (at least at the time of this
 writing) results in completely unsigned binaries that should still work
 fine for development and debugging purposes. On aarch64, the Xcode
 linker will apply a default "adhoc" signing, without any entitlements.
 Such a build does not allow dumping core files.</p>
 <p>The default mode "auto" will try for <code>hardened</code> signing if
 the debug level is <code>release</code> and either the default identity
 or the specified identity is valid. If hardened isn't possible, then
 <code>debug</code> signing is chosen if it works. If nothing works, the
 codesign build step is disabled.</p>
 <h2 id="cross-compiling">Cross-compiling</h2>
 <p>Cross-compiling means using one platform (the <em>build</em>
 platform) to generate output that can ran on another platform (the
 <em>target</em> platform).</p>
 <p>The typical reason for cross-compiling is that the build is performed
 on a more powerful desktop computer, but the resulting binaries will be
 able to run on a different, typically low-performing system. Most of the
 complications that arise when building for embedded is due to this
 separation of <em>build</em> and <em>target</em> systems.</p>
 <p>This requires a more complex setup and build procedure. This section
 assumes you are familiar with cross-compiling in general, and will only
 deal with the particularities of cross-compiling the JDK. If you are new
 to cross-compiling, please see the <a
 href="https://en.wikipedia.org/wiki/Cross_compiler#External_links">external
 links at Wikipedia</a> for a good start on reading materials.</p>
 <p>Cross-compiling the JDK requires you to be able to build both for the
 build platform and for the target platform. The reason for the former is
 that we need to build and execute tools during the build process, both
 native tools and Java tools.</p>
 <p>If all you want to do is to compile a 32-bit version, for the same
 OS, on a 64-bit machine, consider using
 <code>--with-target-bits=32</code> instead of doing a full-blown
 cross-compilation. (While this surely is possible, it's a lot more work
 and will take much longer to build.)</p>
 <h3 id="cross-compiling-the-easy-way-with-openjdk-devkits">Cross
 compiling the easy way with OpenJDK devkits</h3>
 <p>The OpenJDK build system provides out-of-the box support for creating
 and using so called devkits. A <code>devkit</code> is basically a
 collection of a cross-compiling toolchain and a sysroot environment
 which can easily be used together with the <code>--with-devkit</code>
 configure option to cross compile the OpenJDK. On Linux/x86_64, the
 following command:</p>
 <pre><code>bash configure --with-devkit=&lt;devkit-path&gt; --openjdk-target=ppc64-linux-gnu &amp;&amp; make</code></pre>
 <p>will configure and build OpenJDK for Linux/ppc64 assuming that
 <code>&lt;devkit-path&gt;</code> points to a Linux/x86_64 to Linux/ppc64
 devkit.</p>
 <p>Devkits can be created from the <code>make/devkit</code> directory by
 executing:</p>
 <pre><code>make [ TARGETS=&quot;&lt;TARGET_TRIPLET&gt;+&quot; ] [ BASE_OS=&lt;OS&gt; ] [ BASE_OS_VERSION=&lt;VER&gt; ]</code></pre>
 <p>where <code>TARGETS</code> contains one or more
 <code>TARGET_TRIPLET</code>s of the form described in <a
 href="https://sourceware.org/autobook/autobook/autobook_17.html">section
 3.4 of the GNU Autobook</a>. If no targets are given, a native toolchain
 for the current platform will be created. Currently, at least the
 following targets are known to work:</p>
 <table>
 <thead>
 <tr class="header">
 <th>Supported devkit targets</th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
 <td>x86_64-linux-gnu</td>
 </tr>
 <tr class="even">
 <td>aarch64-linux-gnu</td>
 </tr>
 <tr class="odd">
 <td>arm-linux-gnueabihf</td>
 </tr>
 <tr class="even">
 <td>ppc64-linux-gnu</td>
 </tr>
 <tr class="odd">
 <td>ppc64le-linux-gnu</td>
 </tr>
 <tr class="even">
 <td>s390x-linux-gnu</td>
 </tr>
 </tbody>
 </table>
 <p><code>BASE_OS</code> must be one of "OEL6" for Oracle Enterprise
 Linux 6 or "Fedora" (if not specified "OEL6" will be the default). If
 the base OS is "Fedora" the corresponding Fedora release can be
 specified with the help of the <code>BASE_OS_VERSION</code> option (with
 "27" as default version). If the build is successful, the new devkits
 can be found in the <code>build/devkit/result</code> subdirectory:</p>
 <pre><code>cd make/devkit
 make TARGETS=&quot;ppc64le-linux-gnu aarch64-linux-gnu&quot; BASE_OS=Fedora BASE_OS_VERSION=21
 ls -1 ../../build/devkit/result/
 x86_64-linux-gnu-to-aarch64-linux-gnu
 x86_64-linux-gnu-to-ppc64le-linux-gnu</code></pre>
 <p>Notice that devkits are not only useful for targeting different build
 platforms. Because they contain the full build dependencies for a system
 (i.e. compiler and root file system), they can easily be used to build
 well-known, reliable and reproducible build environments. You can for
 example create and use a devkit with GCC 7.3 and a Fedora 12 sysroot
 environment (with glibc 2.11) on Ubuntu 14.04 (which doesn't have GCC
 7.3 by default) to produce OpenJDK binaries which will run on all Linux
 systems with runtime libraries newer than the ones from Fedora 12 (e.g.
 Ubuntu 16.04, SLES 11 or RHEL 6).</p>
 <h3 id="boot-jdk-and-build-jdk">Boot JDK and Build JDK</h3>
 <p>When cross-compiling, make sure you use a boot JDK that runs on the
 <em>build</em> system, and not on the <em>target</em> system.</p>
 <p>To be able to build, we need a "Build JDK", which is a JDK built from
 the current sources (that is, the same as the end result of the entire
 build process), but able to run on the <em>build</em> system, and not
 the <em>target</em> system. (In contrast, the Boot JDK should be from an
 older release, e.g. JDK 8 when building JDK 9.)</p>
 <p>The build process will create a minimal Build JDK for you, as part of
 building. To speed up the build, you can use
 <code>--with-build-jdk</code> to <code>configure</code> to point to a
 pre-built Build JDK. Please note that the build result is unpredictable,
 and can possibly break in subtle ways, if the Build JDK does not
 <strong>exactly</strong> match the current sources.</p>
 <h3 id="specifying-the-target-platform">Specifying the Target
 Platform</h3>
 <p>You <em>must</em> specify the target platform when cross-compiling.
 Doing so will also automatically turn the build into a cross-compiling
 mode. The simplest way to do this is to use the
 <code>--openjdk-target</code> argument, e.g.
 <code>--openjdk-target=arm-linux-gnueabihf</code>. or
 <code>--openjdk-target=aarch64-oe-linux</code>. This will automatically
 set the <code>--host</code> and <code>--target</code> options for
 autoconf, which can otherwise be confusing. (In autoconf terminology,
 the "target" is known as "host", and "target" is used for building a
 Canadian cross-compiler.)</p>
 <p>If <code>--build</code> has not been explicitly passed to configure,
 <code>--openjdk-target</code> will autodetect the build platform and
 internally set the flag automatically, otherwise the platform that was
 explicitly passed to <code>--build</code> will be used instead.</p>
 <h3 id="toolchain-considerations">Toolchain Considerations</h3>
 <p>You will need two copies of your toolchain, one which generates
 output that can run on the target system (the normal, or
 <em>target</em>, toolchain), and one that generates output that can run
 on the build system (the <em>build</em> toolchain). Note that
 cross-compiling is only supported for gcc at the time being. The gcc
 standard is to prefix cross-compiling toolchains with the target
 denominator. If you follow this standard, <code>configure</code> is
 likely to pick up the toolchain correctly.</p>
 <p>The <em>build</em> toolchain will be autodetected just the same way
 the normal <em>build</em>/<em>target</em> toolchain will be autodetected
 when not cross-compiling. If this is not what you want, or if the
 autodetection fails, you can specify a devkit containing the
 <em>build</em> toolchain using <code>--with-build-devkit</code> to
 <code>configure</code>, or by giving <code>BUILD_CC</code> and
 <code>BUILD_CXX</code> arguments.</p>
 <p>It is often helpful to locate the cross-compilation tools, headers
 and libraries in a separate directory, outside the normal path, and
 point out that directory to <code>configure</code>. Do this by setting
 the sysroot (<code>--with-sysroot</code>) and appending the directory
 when searching for cross-compilations tools
 (<code>--with-toolchain-path</code>). As a compact form, you can also
 use <code>--with-devkit</code> to point to a single directory, if it is
 correctly setup. (See <code>basics.m4</code> for details.)</p>
 <h3 id="native-libraries">Native Libraries</h3>
 <p>You will need copies of external native libraries for the
 <em>target</em> system, present on the <em>build</em> machine while
 building.</p>
 <p>Take care not to replace the <em>build</em> system's version of these
 libraries by mistake, since that can render the <em>build</em> machine
 unusable.</p>
 <p>Make sure that the libraries you point to (ALSA, X11, etc) are for
 the <em>target</em>, not the <em>build</em>, platform.</p>
 <h4 id="alsa-1">ALSA</h4>
 <p>You will need alsa libraries suitable for your <em>target</em>
 system. For most cases, using Debian's pre-built libraries work
 fine.</p>
 <p>Note that alsa is needed even if you only want to build a headless
 JDK.</p>
 <ul>
 <li><p>Go to <a href="https://www.debian.org/distrib/packages">Debian
 Package Search</a> and search for the <code>libasound2</code> and
 <code>libasound2-dev</code> packages for your <em>target</em> system.
 Download them to /tmp.</p></li>
 <li><p>Install the libraries into the cross-compilation toolchain. For
 instance:</p></li>
 </ul>
 <pre><code>cd /tools/gcc-linaro-arm-linux-gnueabihf-raspbian-2012.09-20120921_linux/arm-linux-gnueabihf/libc
 dpkg-deb -x /tmp/libasound2_1.0.25-4_armhf.deb .
 dpkg-deb -x /tmp/libasound2-dev_1.0.25-4_armhf.deb .</code></pre>
 <ul>
 <li>If alsa is not properly detected by <code>configure</code>, you can
 point it out by <code>--with-alsa</code>.</li>
 </ul>
 <h4 id="x11-1">X11</h4>
 <p>You will need X11 libraries suitable for your <em>target</em> system.
 For most cases, using Debian's pre-built libraries work fine.</p>
 <p>Note that X11 is needed even if you only want to build a headless
 JDK.</p>
 <ul>
 <li><p>Go to <a href="https://www.debian.org/distrib/packages">Debian
 Package Search</a>, search for the following packages for your
 <em>target</em> system, and download them to /tmp/target-x11:</p>
 <ul>
 <li>libxi</li>
 <li>libxi-dev</li>
 <li>x11proto-core-dev</li>
 <li>x11proto-input-dev</li>
 <li>x11proto-kb-dev</li>
 <li>x11proto-render-dev</li>
 <li>x11proto-xext-dev</li>
 <li>libice-dev</li>
 <li>libxrender</li>
 <li>libxrender-dev</li>
 <li>libxrandr-dev</li>
 <li>libsm-dev</li>
 <li>libxt-dev</li>
 <li>libx11</li>
 <li>libx11-dev</li>
 <li>libxtst</li>
 <li>libxtst-dev</li>
 <li>libxext</li>
 <li>libxext-dev</li>
 </ul></li>
 <li><p>Install the libraries into the cross-compilation toolchain. For
 instance:</p>
 <pre><code>    cd /tools/gcc-linaro-arm-linux-gnueabihf-raspbian-2012.09-20120921_linux/arm-linux-gnueabihf/libc/usr
     mkdir X11R6
     cd X11R6
     for deb in /tmp/target-x11/*.deb ; do dpkg-deb -x $deb . ; done
     mv usr/* .
     cd lib
     cp arm-linux-gnueabihf/* .
     ```

 You can ignore the following messages. These libraries are not needed to
 successfully complete a full JDK build.</code></pre>
 <p>cp: cannot stat
 <code>arm-linux-gnueabihf/libICE.so': No such file or directory cp: cannot stat</code>arm-linux-gnueabihf/libSM.so':
 No such file or directory cp: cannot stat
 `arm-linux-gnueabihf/libXt.so': No such file or directory ```</p></li>
 <li><p>If the X11 libraries are not properly detected by
 <code>configure</code>, you can point them out by
 <code>--with-x</code>.</p></li>
 </ul>
 <h3 id="cross-compiling-with-debian-sysroots">Cross compiling with
 Debian sysroots</h3>
 <p>Fortunately, you can create sysroots for foreign architectures with
 tools provided by your OS. On Debian/Ubuntu systems, one could use
 <code>debootstrap</code> to create the <em>target</em> system chroot,
 which would have the native libraries and headers specific to that
 <em>target</em> system. After that, we can use the cross-compiler on the
 <em>build</em> system, pointing into chroot to get the build
 dependencies right. This allows building for foreign architectures with
 native compilation speed.</p>
 <p>For example, cross-compiling to AArch64 from x86_64 could be done
 like this:</p>
 <ul>
 <li><p>Install cross-compiler on the <em>build</em> system:
 <code>apt install g++-aarch64-linux-gnu gcc-aarch64-linux-gnu</code></p></li>
 <li><p>Create chroot on the <em>build</em> system, configuring it for
 <em>target</em> system:
 <code>sudo debootstrap \       --arch=arm64 \       --verbose \       --include=fakeroot,symlinks,build-essential,libx11-dev,libxext-dev,libxrender-dev,libxrandr-dev,libxtst-dev,libxt-dev,libcups2-dev,libfontconfig1-dev,libasound2-dev,libfreetype6-dev,libpng-dev,libffi-dev \       --resolve-deps \       buster \       ~/sysroot-arm64 \       http://httpredir.debian.org/debian/     # If the target architecture is `riscv64`,     # the path should be `debian-ports` instead of `debian`.</code></p></li>
 <li><p>Make sure the symlinks inside the newly created chroot point to
 proper locations:
 <code>sudo chroot ~/sysroot-arm64 symlinks -cr .</code></p></li>
 <li><p>Configure and build with newly created chroot as
 sysroot/toolchain-path:
 <code>sh ./configure \       --openjdk-target=aarch64-linux-gnu \       --with-sysroot=~/sysroot-arm64     make images     ls build/linux-aarch64-server-release/</code></p></li>
 </ul>
 <p>The build does not create new files in that chroot, so it can be
 reused for multiple builds without additional cleanup.</p>
 <p>The build system should automatically detect the toolchain paths and
 dependencies, but sometimes it might require a little nudge with:</p>
 <ul>
 <li><p>Native compilers: override <code>CC</code> or <code>CXX</code>
 for <code>./configure</code></p></li>
 <li><p>Freetype lib location: override <code>--with-freetype-lib</code>,
 for example <code>${sysroot}/usr/lib/${target}/</code></p></li>
 <li><p>Freetype includes location: override
 <code>--with-freetype-include</code> for example
 <code>${sysroot}/usr/include/freetype2/</code></p></li>
 <li><p>X11 libraries location: override <code>--x-libraries</code>, for
 example <code>${sysroot}/usr/lib/${target}/</code></p></li>
 </ul>
 <p>Architectures that are known to successfully cross-compile like this
 are:</p>
 <table>
 <colgroup>
 <col style="width: 13%" />
 <col style="width: 13%" />
 <col style="width: 15%" />
 <col style="width: 27%" />
 <col style="width: 29%" />
 </colgroup>
 <thead>
 <tr class="header">
 <th>Target</th>
 <th>Debian tree</th>
 <th>Debian arch</th>
 <th><code>--openjdk-target=...</code></th>
 <th><code>--with-jvm-variants=...</code></th>
 </tr>
 </thead>
 <tbody>
 <tr class="odd">
 <td>x86</td>
 <td>buster</td>
 <td>i386</td>
 <td>i386-linux-gnu</td>
 <td>(all)</td>
 </tr>
 <tr class="even">
 <td>arm</td>
 <td>buster</td>
 <td>armhf</td>
 <td>arm-linux-gnueabihf</td>
 <td>(all)</td>
 </tr>
 <tr class="odd">
 <td>aarch64</td>
 <td>buster</td>
 <td>arm64</td>
 <td>aarch64-linux-gnu</td>
 <td>(all)</td>
 </tr>
 <tr class="even">
 <td>ppc64le</td>
 <td>buster</td>
 <td>ppc64el</td>
 <td>powerpc64le-linux-gnu</td>
 <td>(all)</td>
 </tr>
 <tr class="odd">
 <td>s390x</td>
 <td>buster</td>
 <td>s390x</td>
 <td>s390x-linux-gnu</td>
 <td>(all)</td>
 </tr>
 <tr class="even">
 <td>mipsle</td>
 <td>buster</td>
 <td>mipsel</td>
 <td>mipsel-linux-gnu</td>
 <td>zero</td>
 </tr>
 <tr class="odd">
 <td>mips64le</td>
 <td>buster</td>
 <td>mips64el</td>
 <td>mips64el-linux-gnueabi64</td>
 <td>zero</td>
 </tr>
 <tr class="even">
 <td>armel</td>
 <td>buster</td>
 <td>arm</td>
 <td>arm-linux-gnueabi</td>
 <td>zero</td>
 </tr>
 <tr class="odd">
 <td>ppc</td>
 <td>sid</td>
 <td>powerpc</td>
 <td>powerpc-linux-gnu</td>
 <td>zero</td>
 </tr>
 <tr class="even">
 <td>ppc64be</td>
 <td>sid</td>
 <td>ppc64</td>
 <td>powerpc64-linux-gnu</td>
 <td>(all)</td>
 </tr>
 <tr class="odd">
 <td>m68k</td>
 <td>sid</td>
 <td>m68k</td>
 <td>m68k-linux-gnu</td>
 <td>zero</td>
 </tr>
 <tr class="even">
 <td>alpha</td>
 <td>sid</td>
 <td>alpha</td>
 <td>alpha-linux-gnu</td>
 <td>zero</td>
 </tr>
 <tr class="odd">
 <td>sh4</td>
 <td>sid</td>
 <td>sh4</td>
 <td>sh4-linux-gnu</td>
 <td>zero</td>
 </tr>
 <tr class="even">
 <td>riscv64</td>
 <td>sid</td>
 <td>riscv64</td>
 <td>riscv64-linux-gnu</td>
 <td>(all)</td>
 </tr>
 </tbody>
 </table>
 <h3 id="building-for-armaarch64">Building for ARM/aarch64</h3>
 <p>A common cross-compilation target is the ARM CPU. When building for
 ARM, it is useful to set the ABI profile. A number of pre-defined ABI
 profiles are available using <code>--with-abi-profile</code>:
 arm-vfp-sflt, arm-vfp-hflt, arm-sflt, armv5-vfp-sflt, armv6-vfp-hflt.
 Note that soft-float ABIs are no longer properly supported by the
 JDK.</p>
 <h3 id="building-for-risc-v">Building for RISC-V</h3>
 <p>The RISC-V community provides a basic <a
 href="https://github.com/riscv-collab/riscv-gnu-toolchain">GNU compiler
 toolchain</a>, but the <a href="#External-Library-Requirements">external
 libraries</a> required by OpenJDK complicate the building process. The
 placeholder <code>&lt;toolchain-installed-path&gt;</code> shown below is
 the path where you want to install the toolchain.</p>
 <ul>
 <li><p>Install the RISC-V GNU compiler toolchain:
 <code>git clone --recursive https://github.com/riscv-collab/riscv-gnu-toolchain     cd riscv-gnu-toolchain     ./configure --prefix=&lt;toolchain-installed-path&gt;     make linux     export PATH=&lt;toolchain-installed-path&gt;/bin:$PATH</code></p></li>
 <li><p>Cross-compile all the required libraries:
 <code># An example for libffi     git clone https://github.com/libffi/libffi     cd libffi     ./configure --host=riscv64-unknown-linux-gnu --prefix=&lt;toolchain-installed-path&gt;/sysroot/usr     make     make install</code></p></li>
 <li><p>Configure and build OpenJDK:
 <code>bash configure \       --with-boot-jdk=$BOOT_JDK \       --openjdk-target=riscv64-linux-gnu \       --with-sysroot=&lt;toolchain-installed-path&gt;/sysroot \       --with-toolchain-path=&lt;toolchain-installed-path&gt;/bin \       --with-extra-path=&lt;toolchain-installed-path&gt;/bin     make images</code></p></li>
 </ul>
 <h3 id="building-for-musl">Building for musl</h3>
 <p>Just like it's possible to cross-compile for a different CPU, it's
 possible to cross-compile for musl libc on a glibc-based <em>build</em>
 system. A devkit suitable for most target CPU architectures can be
 obtained from <a href="https://musl.cc">musl.cc</a>. After installing
 the required packages in the sysroot, configure the build with
 <code>--openjdk-target</code>:</p>
 <pre><code>sh ./configure --with-jvm-variants=server \
 --with-boot-jdk=$BOOT_JDK \
 --with-build-jdk=$BUILD_JDK \
 --openjdk-target=x86_64-unknown-linux-musl \
 --with-devkit=$DEVKIT \
 --with-sysroot=$SYSROOT</code></pre>
 <p>and run <code>make</code> normally.</p>
 <h3 id="verifying-the-build">Verifying the Build</h3>
 <p>The build will end up in a directory named like
 <code>build/linux-arm-normal-server-release</code>.</p>
 <p>Inside this build output directory, the <code>images/jdk</code> will
 contain the newly built JDK, for your <em>target</em> system.</p>
 <p>Copy these folders to your <em>target</em> system. Then you can run
 e.g. <code>images/jdk/bin/java -version</code>.</p>
 <h2 id="build-performance">Build Performance</h2>
 <p>Building the JDK requires a lot of horsepower. Some of the build
 tools can be adjusted to utilize more or less of resources such as
 parallel threads and memory. The <code>configure</code> script analyzes
 your system and selects reasonable values for such options based on your
 hardware. If you encounter resource problems, such as out of memory
 conditions, you can modify the detected values with:</p>
 <ul>
 <li><p><code>--with-num-cores</code> -- number of cores in the build
 system, e.g. <code>--with-num-cores=8</code>.</p></li>
 <li><p><code>--with-memory-size</code> -- memory (in MB) available in
 the build system, e.g. <code>--with-memory-size=1024</code></p></li>
 </ul>
 <p>You can also specify directly the number of build jobs to use with
 <code>--with-jobs=N</code> to <code>configure</code>, or
 <code>JOBS=N</code> to <code>make</code>. Do not use the <code>-j</code>
 flag to <code>make</code>. In most cases it will be ignored by the
 makefiles, but it can cause problems for some make targets.</p>
 <p>It might also be necessary to specify the JVM arguments passed to the
 Boot JDK, using e.g. <code>--with-boot-jdk-jvmargs="-Xmx8G"</code>.
 Doing so will override the default JVM arguments passed to the Boot
 JDK.</p>
 <p>At the end of a successful execution of <code>configure</code>, you
 will get a performance summary, indicating how well the build will
 perform. Here you will also get performance hints. If you want to build
 fast, pay attention to those!</p>
 <p>If you want to tweak build performance, run with
 <code>make LOG=info</code> to get a build time summary at the end of the
 build process.</p>
 <h3 id="disk-speed">Disk Speed</h3>
 <p>If you are using network shares, e.g. via NFS, for your source code,
 make sure the build directory is situated on local disk (e.g. by
 <code>ln -s /localdisk/jdk-build $JDK-SHARE/build</code>). The
 performance penalty is extremely high for building on a network share;
 close to unusable.</p>
 <p>Also, make sure that your build tools (including Boot JDK and
 toolchain) is located on a local disk and not a network share.</p>
 <p>As has been stressed elsewhere, do use SSD for source code and build
 directory, as well as (if possible) the build tools.</p>
 <h3 id="virus-checking">Virus Checking</h3>
 <p>The use of virus checking software, especially on Windows, can
 <em>significantly</em> slow down building of the JDK. If possible, turn
 off such software, or exclude the directory containing the JDK source
 code from on-the-fly checking.</p>
 <h3 id="ccache">Ccache</h3>
 <p>The JDK build supports building with ccache when using gcc or clang.
 Using ccache can radically speed up compilation of native code if you
 often rebuild the same sources. Your milage may vary however, so we
 recommend evaluating it for yourself. To enable it, make sure it's on
 the path and configure with <code>--enable-ccache</code>.</p>
 <h3 id="precompiled-headers">Precompiled Headers</h3>
 <p>By default, the Hotspot build uses preccompiled headers (PCH) on the
 toolchains were it is properly supported (clang, gcc, and Visual
 Studio). Normally, this speeds up the build process, but in some
 circumstances, it can actually slow things down.</p>
 <p>You can experiment by disabling precompiled headers using
 <code>--disable-precompiled-headers</code>.</p>
 <h3 id="icecc-icecream">Icecc / icecream</h3>
 <p><a href="http://github.com/icecc/icecream">icecc/icecream</a> is a
 simple way to setup a distributed compiler network. If you have multiple
 machines available for building the JDK, you can drastically cut
 individual build times by utilizing it.</p>
 <p>To use, setup an icecc network, and install icecc on the build
 machine. Then run <code>configure</code> using
 <code>--enable-icecc</code>.</p>
 <h3 id="using-the-javac-server">Using the javac server</h3>
 <p>To speed up compilation of Java code, especially during incremental
 compilations, the javac server is automatically enabled in the
 configuration step by default. To explicitly enable or disable the javac
 server, use either <code>--enable-javac-server</code> or
 <code>--disable-javac-server</code>.</p>
 <h3 id="building-the-right-target">Building the Right Target</h3>
 <p>Selecting the proper target to build can have dramatic impact on
 build time. For normal usage, <code>jdk</code> or the default target is
 just fine. You only need to build <code>images</code> for shipping, or
 if your tests require it.</p>
 <p>See also <a href="#using-fine-grained-make-targets">Using
 Fine-Grained Make Targets</a> on how to build an even smaller subset of
 the product.</p>
 <h2 id="troubleshooting">Troubleshooting</h2>
 <p>If your build fails, it can sometimes be difficult to pinpoint the
 problem or find a proper solution.</p>
 <h3 id="locating-the-source-of-the-error">Locating the Source of the
 Error</h3>
 <p>When a build fails, it can be hard to pinpoint the actual cause of
 the error. In a typical build process, different parts of the product
 build in parallel, with the output interlaced.</p>
 <h4 id="build-failure-summary">Build Failure Summary</h4>
 <p>To help you, the build system will print a failure summary at the
 end. It looks like this:</p>
 <pre><code>ERROR: Build failed for target &#39;hotspot&#39; in configuration &#39;linux-x64&#39; (exit code 2)

 === Output from failing command(s) repeated here ===
 * For target hotspot_variant-server_libjvm_objs_psMemoryPool.o:
 /localhome/git/jdk-sandbox/hotspot/src/share/vm/services/psMemoryPool.cpp:1:1: error: &#39;failhere&#39; does not name a type
    ... (rest of output omitted)

 * All command lines available in /localhome/git/jdk-sandbox/build/linux-x64/make-support/failure-logs.
 === End of repeated output ===

 === Make failed targets repeated here ===
 lib/CompileJvm.gmk:207: recipe for target &#39;/localhome/git/jdk-sandbox/build/linux-x64/hotspot/variant-server/libjvm/objs/psMemoryPool.o&#39; failed
 make/Main.gmk:263: recipe for target &#39;hotspot-server-libs&#39; failed
 === End of repeated output ===

 Hint: Try searching the build log for the name of the first failed target.
 Hint: If caused by a warning, try configure --disable-warnings-as-errors.</code></pre>
 <p>Let's break it down! First, the selected configuration, and the
 top-level target you entered on the command line that caused the failure
 is printed.</p>
 <p>Then, between the
 <code>Output from failing command(s) repeated here</code> and
 <code>End of repeated output</code> the first lines of output (stdout
 and stderr) from the actual failing command is repeated. In most cases,
 this is the error message that caused the build to fail. If multiple
 commands were failing (this can happen in a parallel build), output from
 all failed commands will be printed here.</p>
 <p>The path to the <code>failure-logs</code> directory is printed. In
 this file you will find a <code>&lt;target&gt;.log</code> file that
 contains the output from this command in its entirety, and also a
 <code>&lt;target&gt;.cmd</code>, which contain the complete command line
 used for running this command. You can re-run the failing command by
 executing <code>. &lt;path to failure-logs&gt;/&lt;target&gt;.cmd</code>
 in your shell.</p>
 <p>Another way to trace the failure is to follow the chain of make
 targets, from top-level targets to individual file targets. Between
 <code>Make failed targets repeated here</code> and
 <code>End of repeated output</code> the output from make showing this
 chain is repeated. The first failed recipe will typically contain the
 full path to the file in question that failed to compile. Following
 lines will show a trace of make targets why we ended up trying to
 compile that file.</p>
 <p>Finally, some hints are given on how to locate the error in the
 complete log. In this example, we would try searching the log file for
 "<code>psMemoryPool.o</code>". Another way to quickly locate make errors
 in the log is to search for "<code>] Error</code>" or
 "<code>***</code>".</p>
 <p>Note that the build failure summary will only help you if the issue
 was a compilation failure or similar. If the problem is more esoteric,
 or is due to errors in the build machinery, you will likely get empty
 output logs, and <code>No indication of failed target found</code>
 instead of the make target chain.</p>
 <h4 id="checking-the-build-log-file">Checking the Build Log File</h4>
 <p>The output (stdout and stderr) from the latest build is always stored
 in <code>$BUILD/build.log</code>. The previous build log is stored as
 <code>build.log.old</code>. This means that it is not necessary to
 redirect the build output yourself if you want to process it.</p>
 <p>You can increase the verbosity of the log file, by the
 <code>LOG</code> control variable to <code>make</code>. If you want to
 see the command lines used in compilations, use
 <code>LOG=cmdlines</code>. To increase the general verbosity, use
 <code>LOG=info</code>, <code>LOG=debug</code> or <code>LOG=trace</code>.
 Both of these can be combined with <code>cmdlines</code>, e.g.
 <code>LOG=info,cmdlines</code>. The <code>debug</code> log level will
 show most shell commands executed by make, and <code>trace</code> will
 show all. Beware that both these log levels will produce a massive build
 log!</p>
 <h3 id="fixing-unexpected-build-failures">Fixing Unexpected Build
 Failures</h3>
 <p>Most of the time, the build will fail due to incorrect changes in the
 source code.</p>
 <p>Sometimes the build can fail with no apparent changes that have
 caused the failure. If this is the first time you are building the JDK
 on this particular computer, and the build fails, the problem is likely
 with your build environment. But even if you have previously built the
 JDK with success, and it now fails, your build environment might have
 changed (perhaps due to OS upgrades or similar). But most likely, such
 failures are due to problems with the incremental rebuild.</p>
 <h4 id="problems-with-the-build-environment">Problems with the Build
 Environment</h4>
 <p>Make sure your configuration is correct. Re-run
 <code>configure</code>, and look for any warnings. Warnings that appear
 in the middle of the <code>configure</code> output is also repeated at
 the end, after the summary. The entire log is stored in
 <code>$BUILD/configure.log</code>.</p>
 <p>Verify that the summary at the end looks correct. Are you indeed
 using the Boot JDK and native toolchain that you expect?</p>
 <p>By default, the JDK has a strict approach where warnings from the
 compiler is considered errors which fail the build. For very new or very
 old compiler versions, this can trigger new classes of warnings, which
 thus fails the build. Run <code>configure</code> with
 <code>--disable-warnings-as-errors</code> to turn of this behavior. (The
 warnings will still show, but not make the build fail.)</p>
 <h4 id="problems-with-incremental-rebuilds">Problems with Incremental
 Rebuilds</h4>
 <p>Incremental rebuilds mean that when you modify part of the product,
 only the affected parts get rebuilt. While this works great in most
 cases, and significantly speed up the development process, from time to
 time complex interdependencies will result in an incorrect build result.
 This is the most common cause for unexpected build problems.</p>
 <p>Here are a suggested list of things to try if you are having
 unexpected build problems. Each step requires more time than the one
 before, so try them in order. Most issues will be solved at step 1 or
 2.</p>
 <ol type="1">
 <li><p>Make sure your repository is up-to-date</p>
 <p>Run <code>git pull origin master</code> to make sure you have the
 latest changes.</p></li>
 <li><p>Clean build results</p>
 <p>The simplest way to fix incremental rebuild issues is to run
 <code>make clean</code>. This will remove all build results, but not the
 configuration or any build system support artifacts. In most cases, this
 will solve build errors resulting from incremental build
 mismatches.</p></li>
 <li><p>Completely clean the build directory.</p>
 <p>If this does not work, the next step is to run
 <code>make dist-clean</code>, or removing the build output directory
 (<code>$BUILD</code>). This will clean all generated output, including
 your configuration. You will need to re-run <code>configure</code> after
 this step. A good idea is to run <code>make print-configuration</code>
 before running <code>make dist-clean</code>, as this will print your
 current <code>configure</code> command line. Here's a way to do
 this:</p>
 <pre><code>make print-configuration &gt; current-configuration
 make dist-clean
 bash configure $(cat current-configuration)
 make</code></pre></li>
 <li><p>Re-clone the Git repository</p>
 <p>Sometimes the Git repository gets in a state that causes the product
 to be un-buildable. In such a case, the simplest solution is often the
 "sledgehammer approach": delete the entire repository, and re-clone it.
 If you have local changes, save them first to a different location using
 <code>git format-patch</code>.</p></li>
 </ol>
 <h3 id="specific-build-issues">Specific Build Issues</h3>
 <h4 id="clock-skew">Clock Skew</h4>
 <p>If you get an error message like this:</p>
 <pre><code>File &#39;xxx&#39; has modification time in the future.
 Clock skew detected. Your build may be incomplete.</code></pre>
 <p>then the clock on your build machine is out of sync with the
 timestamps on the source files. Other errors, apparently unrelated but
 in fact caused by the clock skew, can occur along with the clock skew
 warnings. These secondary errors may tend to obscure the fact that the
 true root cause of the problem is an out-of-sync clock.</p>
 <p>If you see these warnings, reset the clock on the build machine, run
 <code>make clean</code> and restart the build.</p>
 <h4 id="out-of-memory-errors">Out of Memory Errors</h4>
 <p>On Windows, you might get error messages like this:</p>
 <pre><code>fatal error - couldn&#39;t allocate heap
 cannot create ... Permission denied
 spawn failed</code></pre>
 <p>This can be a sign of a Cygwin problem. See the information about
 solving problems in the <a href="#cygwin">Cygwin</a> section. Rebooting
 the computer might help temporarily.</p>
 <h4 id="spaces-in-path">Spaces in Path</h4>
 <p>On Windows, when configuring, <code>fixpath.sh</code> may report that
 some directory names have spaces. Usually, it assumes those directories
 have <a
 href="https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/fsutil-8dot3name">short
 paths</a>. You can run <code>fsutil file setshortname</code> in
 <code>cmd</code> on certain directories, such as
 <code>Microsoft Visual Studio</code> or <code>Windows Kits</code>, to
 assign arbitrary short paths so <code>configure</code> can access
 them.</p>
 <h3 id="getting-help">Getting Help</h3>
 <p>If none of the suggestions in this document helps you, or if you find
 what you believe is a bug in the build system, please contact the Build
 Group by sending a mail to <a
 href="mailto:build-dev@openjdk.org">build-dev@openjdk.org</a>. Please
 include the relevant parts of the configure and/or build log.</p>
 <p>If you need general help or advice about developing for the JDK, you
 can also contact the Adoption Group. See the section on <a
 href="#contributing-to-openjdk">Contributing to OpenJDK</a> for more
 information.</p>
 <h2 id="reproducible-builds">Reproducible Builds</h2>
 <p>Build reproducibility is the property of getting exactly the same
 bits out when building, every time, independent on who builds the
 product, or where. This is for many reasons a harder goal than it
 initially appears, but it is an important goal, for security reasons and
 others. Please see <a
 href="https://reproducible-builds.org">Reproducible Builds</a> for more
 information about the background and reasons for reproducible
 builds.</p>
 <p>Currently, it is not possible to build OpenJDK fully reproducibly,
 but getting there is an ongoing effort.</p>
 <p>An absolute prerequisite for building reproducible is to speficy a
 fixed build time, since time stamps are embedded in many file formats.
 This is done by setting the <code>SOURCE_DATE_EPOCH</code> environment
 variable, which is an <a
 href="https://reproducible-builds.org/docs/source-date-epoch/">industry
 standard</a>, that many tools, such as gcc, recognize, and use in place
 of the current time when generating output.</p>
 <p>To generate reproducible builds, you must set
 <code>SOURCE_DATE_EPOCH</code> before running <code>configure</code>.
 The value in <code>SOURCE_DATE_EPOCH</code> will be stored in the
 configuration, and used by <code>make</code>. Setting
 <code>SOURCE_DATE_EPOCH</code> before running <code>make</code> will
 have no effect on the build.</p>
 <p>You must also make sure your build does not rely on
 <code>configure</code>'s default adhoc version strings. Default adhoc
 version strings <code>OPT</code> segment include user name and source
 directory. You can either override just the <code>OPT</code> segment
 using <code>--with-version-opt=&lt;any fixed string&gt;</code>, or you
 can specify the entire version string using
 <code>--with-version-string=&lt;your version&gt;</code>.</p>
 <p>This is a typical example of how to build the JDK in a reproducible
 way:</p>
 <pre><code>export SOURCE_DATE_EPOCH=946684800
 bash configure --with-version-opt=adhoc
 make</code></pre>
 <p>Note that regardless if you specify a source date for
 <code>configure</code> or not, the JDK build system will set
 <code>SOURCE_DATE_EPOCH</code> for all build tools when building. If
 <code>--with-source-date</code> has the value <code>current</code>
 (which is the default unless <code>SOURCE_DATE_EPOCH</code> is found by
 in the environment by <code>configure</code>), the source date value
 will be determined at configure time.</p>
 <p>There are several aspects of reproducible builds that can be
 individually adjusted by <code>configure</code> arguments. If any of
 these are given, they will override the value derived from
 <code>SOURCE_DATE_EPOCH</code>. These arguments are:</p>
 <ul>
 <li><p><code>--with-source-date</code></p>
 <p>This option controls how the JDK build sets
 <code>SOURCE_DATE_EPOCH</code> when building. It can be set to a value
 describing a date, either an epoch based timestamp as an integer, or a
 valid ISO-8601 date.</p>
 <p>It can also be set to one of the special values <code>current</code>,
 <code>updated</code> or <code>version</code>. <code>current</code> means
 that the time of running <code>configure</code> will be used.
 <code>version</code> will use the nominal release date for the current
 JDK version. <code>updated</code>, which means that
 <code>SOURCE_DATE_EPOCH</code> will be set to the current time each time
 you are running <code>make</code>. All choices, except for
 <code>updated</code>, will set a fixed value for the source date
 timestamp.</p>
 <p>When <code>SOURCE_DATE_EPOCH</code> is set, the default value for
 <code>--with-source-date</code> will be the value given by
 <code>SOURCE_DATE_EPOCH</code>. Otherwise, the default value is
 <code>current</code>.</p></li>
 <li><p><code>--with-hotspot-build-time</code></p>
 <p>This option controls the build time string that will be included in
 the hotspot library (<code>libjvm.so</code> or <code>jvm.dll</code>).
 When the source date is fixed (e.g. by setting
 <code>SOURCE_DATE_EPOCH</code>), the default value for
 <code>--with-hotspot-build-time</code> will be an ISO 8601
 representation of that time stamp. Otherwise the default value will be
 the current time when building hotspot.</p></li>
 <li><p><code>--with-copyright-year</code></p>
 <p>This option controls the copyright year in some generated text files.
 When the source date is fixed (e.g. by setting
 <code>SOURCE_DATE_EPOCH</code>), the default value for
 <code>--with-copyright-year</code> will be the year of that time stamp.
 Otherwise the default is the current year at the time of running
 configure. This can be overridden by
 <code>--with-copyright-year=&lt;year&gt;</code>.</p></li>
 <li><p><code>--enable-reproducible-build</code></p>
 <p>This option controls some additional behavior needed to make the
 build reproducible. When the source date is fixed (e.g. by setting
 <code>SOURCE_DATE_EPOCH</code>), this flag will be turned on by default.
 Otherwise, the value is determined by heuristics. If it is explicitly
 turned off, the build might not be reproducible.</p></li>
 </ul>
 <h2 id="hints-and-suggestions-for-advanced-users">Hints and Suggestions
 for Advanced Users</h2>
 <h3 id="bash-completion">Bash Completion</h3>
 <p>The <code>configure</code> and <code>make</code> commands tries to
 play nice with bash command-line completion (using
 <code>&lt;tab&gt;</code> or <code>&lt;tab&gt;&lt;tab&gt;</code>). To use
 this functionality, make sure you enable completion in your
 <code>~/.bashrc</code> (see instructions for bash in your operating
 system).</p>
 <p>Make completion will work out of the box, and will complete valid
 make targets. For instance, typing <code>make jdk-i&lt;tab&gt;</code>
 will complete to <code>make jdk-image</code>.</p>
 <p>The <code>configure</code> script can get completion for options, but
 for this to work you need to help <code>bash</code> on the way. The
 standard way of running the script, <code>bash configure</code>, will
 not be understood by bash completion. You need <code>configure</code> to
 be the command to run. One way to achieve this is to add a simple helper
 script to your path:</p>
 <pre><code>cat &lt;&lt; EOT &gt; /tmp/configure
 #!/bin/bash
 if [ \$(pwd) = \$(cd \$(dirname \$0); pwd) ] ; then
   echo &gt;&amp;2 &quot;Abort: Trying to call configure helper recursively&quot;
   exit 1
 fi

 bash \$PWD/configure &quot;\$@&quot;
 EOT
 chmod +x /tmp/configure
 sudo mv /tmp/configure /usr/local/bin</code></pre>
 <p>Now <code>configure --en&lt;tab&gt;-dt&lt;tab&gt;</code> will result
 in <code>configure --enable-dtrace</code>.</p>
 <h3 id="using-multiple-configurations">Using Multiple
 Configurations</h3>
 <p>You can have multiple configurations for a single source repository.
 When you create a new configuration, run
 <code>configure --with-conf-name=&lt;name&gt;</code> to create a
 configuration with the name <code>&lt;name&gt;</code>. Alternatively,
 you can create a directory under <code>build</code> and run
 <code>configure</code> from there, e.g.
 <code>mkdir build/&lt;name&gt; &amp;&amp; cd build/&lt;name&gt; &amp;&amp; bash ../../configure</code>.</p>
 <p>Then you can build that configuration using
 <code>make CONF_NAME=&lt;name&gt;</code> or
 <code>make CONF=&lt;pattern&gt;</code>, where
 <code>&lt;pattern&gt;</code> is a substring matching one or several
 configurations, e.g. <code>CONF=debug</code>. The special empty pattern
 (<code>CONF=</code>) will match <em>all</em> available configuration, so
 <code>make CONF= hotspot</code> will build the <code>hotspot</code>
 target for all configurations. Alternatively, you can execute
 <code>make</code> in the configuration directory, e.g.
 <code>cd build/&lt;name&gt; &amp;&amp; make</code>.</p>
 <h3 id="handling-reconfigurations">Handling Reconfigurations</h3>
 <p>If you update the repository and part of the configure script has
 changed, the build system will force you to re-run
 <code>configure</code>.</p>
 <p>Most of the time, you will be fine by running <code>configure</code>
 again with the same arguments as the last time, which can easily be
 performed by <code>make reconfigure</code>. To simplify this, you can
 use the <code>CONF_CHECK</code> make control variable, either as
 <code>make CONF_CHECK=auto</code>, or by setting an environment
 variable. For instance, if you add <code>export CONF_CHECK=auto</code>
 to your <code>.bashrc</code> file, <code>make</code> will always run
 <code>reconfigure</code> automatically whenever the configure script has
 changed.</p>
 <p>You can also use <code>CONF_CHECK=ignore</code> to skip the check for
 a needed configure update. This might speed up the build, but comes at
 the risk of an incorrect build result. This is only recommended if you
 know what you're doing.</p>
 <p>From time to time, you will also need to modify the command line to
 <code>configure</code> due to changes. Use
 <code>make print-configuration</code> to show the command line used for
 your current configuration.</p>
 <h3 id="using-fine-grained-make-targets">Using Fine-Grained Make
 Targets</h3>
 <p>The default behavior for make is to create consistent and correct
 output, at the expense of build speed, if necessary.</p>
 <p>If you are prepared to take some risk of an incorrect build, and know
 enough of the system to understand how things build and interact, you
 can speed up the build process considerably by instructing make to only
 build a portion of the product.</p>
 <h4 id="building-individual-modules">Building Individual Modules</h4>
 <p>The safe way to use fine-grained make targets is to use the module
 specific make targets. All source code in the JDK is organized so it
 belongs to a module, e.g. <code>java.base</code> or
 <code>jdk.jdwp.agent</code>. You can build only a specific module, by
 giving it as make target: <code>make jdk.jdwp.agent</code>. If the
 specified module depends on other modules (e.g. <code>java.base</code>),
 those modules will be built first.</p>
 <p>You can also specify a set of modules, just as you can always specify
 a set of make targets:
 <code>make jdk.crypto.cryptoki jdk.crypto.ec jdk.crypto.mscapi</code></p>
 <h4 id="building-individual-module-phases">Building Individual Module
 Phases</h4>
 <p>The build process for each module is divided into separate phases.
 Not all modules need all phases. Which are needed depends on what kind
 of source code and other artifact the module consists of. The phases
 are:</p>
 <ul>
 <li><code>gensrc</code> (Generate source code to compile)</li>
 <li><code>gendata</code> (Generate non-source code artifacts)</li>
 <li><code>copy</code> (Copy resource artifacts)</li>
 <li><code>java</code> (Compile Java code)</li>
 <li><code>launchers</code> (Compile native executables)</li>
 <li><code>libs</code> (Compile native libraries)</li>
 </ul>
 <p>You can build only a single phase for a module by using the notation
 <code>$MODULE-$PHASE</code>. For instance, to build the
 <code>gensrc</code> phase for <code>java.base</code>, use
 <code>make java.base-gensrc</code>.</p>
 <p>Note that some phases may depend on others, e.g. <code>java</code>
 depends on <code>gensrc</code> (if present). Make will build all needed
 prerequisites before building the requested phase.</p>
 <h4 id="skipping-the-dependency-check">Skipping the Dependency
 Check</h4>
 <p>When using an iterative development style with frequent quick
 rebuilds, the dependency check made by make can take up a significant
 portion of the time spent on the rebuild. In such cases, it can be
 useful to bypass the dependency check in make.</p>
 <blockquote>
 <p><strong>Note that if used incorrectly, this can lead to a broken
 build!</strong></p>
 </blockquote>
 <p>To achieve this, append <code>-only</code> to the build target. For
 instance, <code>make jdk.jdwp.agent-java-only</code> will <em>only</em>
 build the <code>java</code> phase of the <code>jdk.jdwp.agent</code>
 module. If the required dependencies are not present, the build can
 fail. On the other hand, the execution time measures in
 milliseconds.</p>
 <p>A useful pattern is to build the first time normally (e.g.
 <code>make jdk.jdwp.agent</code>) and then on subsequent builds, use the
 <code>-only</code> make target.</p>
 <h4 id="rebuilding-part-of-java.base-jdk_filter">Rebuilding Part of
 java.base (JDK_FILTER)</h4>
 <p>If you are modifying files in <code>java.base</code>, which is the by
 far largest module in the JDK, then you need to rebuild all those files
 whenever a single file has changed. (This inefficiency will hopefully be
 addressed in JDK 10.)</p>
 <p>As a hack, you can use the make control variable
 <code>JDK_FILTER</code> to specify a pattern that will be used to limit
 the set of files being recompiled. For instance,
 <code>make java.base JDK_FILTER=javax/crypto</code> (or, to combine
 methods, <code>make java.base-java-only JDK_FILTER=javax/crypto</code>)
 will limit the compilation to files in the <code>javax.crypto</code>
 package.</p>
 <h2 id="understanding-the-build-system">Understanding the Build
 System</h2>
 <p>This section will give you a more technical description on the
 details of the build system.</p>
 <h3 id="configurations">Configurations</h3>
 <p>The build system expects to find one or more configuration. These are
 technically defined by the <code>spec.gmk</code> in a subdirectory to
 the <code>build</code> subdirectory. The <code>spec.gmk</code> file is
 generated by <code>configure</code>, and contains in principle the
 configuration (directly or by files included by
 <code>spec.gmk</code>).</p>
 <p>You can, in fact, select a configuration to build by pointing to the
 <code>spec.gmk</code> file with the <code>SPEC</code> make control
 variable, e.g. <code>make SPEC=$BUILD/spec.gmk</code>. While this is not
 the recommended way to call <code>make</code> as a user, it is what is
 used under the hood by the build system.</p>
 <h3 id="build-output-structure">Build Output Structure</h3>
 <p>The build output for a configuration will end up in
 <code>build/&lt;configuration name&gt;</code>, which we refer to as
 <code>$BUILD</code> in this document. The <code>$BUILD</code> directory
 contains the following important directories:</p>
 <pre><code>buildtools/
 configure-support/
 hotspot/
 images/
 jdk/
 make-support/
 support/
 test-results/
 test-support/</code></pre>
 <p>This is what they are used for:</p>
 <ul>
 <li><p><code>images</code>: This is the directory were the output of the
 <code>*-image</code> make targets end up. For instance,
 <code>make jdk-image</code> ends up in <code>images/jdk</code>.</p></li>
 <li><p><code>jdk</code>: This is the "exploded image". After
 <code>make jdk</code>, you will be able to launch the newly built JDK by
 running <code>$BUILD/jdk/bin/java</code>.</p></li>
 <li><p><code>test-results</code>: This directory contains the results
 from running tests.</p></li>
 <li><p><code>support</code>: This is an area for intermediate files
 needed during the build, e.g. generated source code, object files and
 class files. Some noteworthy directories in <code>support</code> is
 <code>gensrc</code>, which contains the generated source code, and the
 <code>modules_*</code> directories, which contains the files in a
 per-module hierarchy that will later be collapsed into the
 <code>jdk</code> directory of the exploded image.</p></li>
 <li><p><code>buildtools</code>: This is an area for tools compiled for
 the build platform that are used during the rest of the build.</p></li>
 <li><p><code>hotspot</code>: This is an area for intermediate files
 needed when building hotspot.</p></li>
 <li><p><code>configure-support</code>, <code>make-support</code> and
 <code>test-support</code>: These directories contain files that are
 needed by the build system for <code>configure</code>, <code>make</code>
 and for running tests.</p></li>
 </ul>
 <h3 id="fixpath">Fixpath</h3>
 <p>Windows path typically look like <code>C:\User\foo</code>, while Unix
 paths look like <code>/home/foo</code>. Tools with roots from Unix often
 experience issues related to this mismatch when running on Windows.</p>
 <p>In the JDK build, we always use Unix paths internally, and only just
 before calling a tool that does not understand Unix paths do we convert
 them to Windows paths.</p>
 <p>This conversion is done by the <code>fixpath</code> tool, which is a
 small wrapper that modifies unix-style paths to Windows-style paths in
 command lines. Fixpath is compiled automatically by
 <code>configure</code>.</p>
 <h3 id="native-debug-symbols">Native Debug Symbols</h3>
 <p>Native libraries and executables can have debug symbol (and other
 debug information) associated with them. How this works is very much
 platform dependent, but a common problem is that debug symbol
 information takes a lot of disk space, but is rarely needed by the end
 user.</p>
 <p>The JDK supports different methods on how to handle debug symbols.
 The method used is selected by <code>--with-native-debug-symbols</code>,
 and available methods are <code>none</code>, <code>internal</code>,
 <code>external</code>, <code>zipped</code>.</p>
 <ul>
 <li><p><code>none</code> means that no debug symbols will be generated
 during the build.</p></li>
 <li><p><code>internal</code> means that debug symbols will be generated
 during the build, and they will be stored in the generated
 binary.</p></li>
 <li><p><code>external</code> means that debug symbols will be generated
 during the build, and after the compilation, they will be moved into a
 separate <code>.debuginfo</code> file. (This was previously known as
 FDS, Full Debug Symbols).</p></li>
 <li><p><code>zipped</code> is like <code>external</code>, but the
 .debuginfo file will also be zipped into a <code>.diz</code>
 file.</p></li>
 </ul>
 <p>When building for distribution, <code>zipped</code> is a good
 solution. Binaries built with <code>internal</code> is suitable for use
 by developers, since they facilitate debugging, but should be stripped
 before distributed to end users.</p>
 <h3 id="autoconf-details">Autoconf Details</h3>
 <p>The <code>configure</code> script is based on the autoconf framework,
 but in some details deviate from a normal autoconf
 <code>configure</code> script.</p>
 <p>The <code>configure</code> script in the top level directory of the
 JDK is just a thin wrapper that calls
 <code>make/autoconf/configure</code>. This in turn will run
 <code>autoconf</code> to create the runnable (generated) configure
 script, as <code>.build/generated-configure.sh</code>. Apart from being
 responsible for the generation of the runnable script, the
 <code>configure</code> script also provides functionality that is not
 easily expressed in the normal Autoconf framework. As part of this
 functionality, the generated script is called.</p>
 <p>The build system will detect if the Autoconf source files have
 changed, and will trigger a regeneration of the generated script if
 needed. You can also manually request such an update by
 <code>bash configure autogen</code>.</p>
 <p>In previous versions of the JDK, the generated script was checked in
 at <code>make/autoconf/generated-configure.sh</code>. This is no longer
 the case.</p>
 <h3 id="developing-the-build-system-itself">Developing the Build System
 Itself</h3>
 <p>This section contains a few remarks about how to develop for the
 build system itself. It is not relevant if you are only making changes
 in the product source code.</p>
 <p>While technically using <code>make</code>, the make source files of
 the JDK does not resemble most other Makefiles. Instead of listing
 specific targets and actions (perhaps using patterns), the basic modus
 operandi is to call a high-level function (or properly, macro) from the
 API in <code>make/common</code>. For instance, to compile all classes in
 the <code>jdk.internal.foo</code> package in the <code>jdk.foo</code>
 module, a call like this would be made:</p>
 <pre><code>$(eval $(call SetupJavaCompilation, BUILD_FOO_CLASSES, \
     SETUP := GENERATE_OLDBYTECODE, \
     SRC := $(TOPDIR)/src/jkd.foo/share/classes, \
     INCLUDES := jdk/internal/foo, \
     BIN := $(SUPPORT_OUTPUTDIR)/foo_classes, \
 ))</code></pre>
 <p>By encapsulating and expressing the high-level knowledge of
 <em>what</em> should be done, rather than <em>how</em> it should be done
 (as is normal in Makefiles), we can build a much more powerful and
 flexible build system.</p>
 <p>Correct dependency tracking is paramount. Sloppy dependency tracking
 will lead to improper parallelization, or worse, race conditions.</p>
 <p>To test for/debug race conditions, try running
 <code>make JOBS=1</code> and <code>make JOBS=100</code> and see if it
 makes any difference. (It shouldn't).</p>
 <p>To compare the output of two different builds and see if, and how,
 they differ, run <code>$BUILD1/compare.sh -o $BUILD2</code>, where
 <code>$BUILD1</code> and <code>$BUILD2</code> are the two builds you
 want to compare.</p>
 <p>To automatically build two consecutive versions and compare them, use
 <code>COMPARE_BUILD</code>. The value of <code>COMPARE_BUILD</code> is a
 set of variable=value assignments, like this:</p>
 <pre><code>make COMPARE_BUILD=CONF=--enable-new-hotspot-feature:MAKE=hotspot</code></pre>
 <p>See <code>make/InitSupport.gmk</code> for details on how to use
 <code>COMPARE_BUILD</code>.</p>
 <p>To analyze build performance, run with <code>LOG=trace</code> and
 check <code>$BUILD/build-trace-time.log</code>. Use <code>JOBS=1</code>
 to avoid parallelism.</p>
 <p>Please check that you adhere to the <a
 href="http://openjdk.org/groups/build/doc/code-conventions.html">Code
 Conventions for the Build System</a> before submitting patches.</p>
 <h2 id="contributing-to-the-jdk">Contributing to the JDK</h2>
 <p>So, now you've built your JDK, and made your first patch, and want to
 contribute it back to the OpenJDK Community.</p>
 <p>First of all: Thank you! We gladly welcome your contribution.
 However, please bear in mind that the JDK is a massive project, and we
 must ask you to follow our rules and guidelines to be able to accept
 your contribution.</p>
 <p>The official place to start is the <a
 href="http://openjdk.org/contribute/">'How to contribute' page</a>.
 There is also an official (but somewhat outdated and skimpy on details)
 <a href="http://openjdk.org/guide/">Developer's Guide</a>.</p>
 <p>If this seems overwhelming to you, the Adoption Group is there to
 help you! A good place to start is their <a
 href="https://wiki.openjdk.org/display/Adoption/New+Contributor">'New
 Contributor' page</a>, or start reading the comprehensive <a
 href="https://adoptopenjdk.gitbooks.io/adoptopenjdk-getting-started-kit/en/">Getting
 Started Kit</a>. The Adoption Group will also happily answer any
 questions you have about contributing. Contact them by <a
 href="http://mail.openjdk.org/mailman/listinfo/adoption-discuss">mail</a>
 or <a href="http://openjdk.org/irc/">IRC</a>.</p>
 <h2 id="editing-this-document">Editing this document</h2>
 <p>If you want to contribute changes to this document, edit
 <code>doc/building.md</code> and then run
 <code>make update-build-docs</code> to generate the same changes in
 <code>doc/building.html</code>.</p>
 </body>
 </html>