| /* |
| * Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * Copyright (c) 2012, Stephen Colebourne & Michael Nascimento Santos |
| * |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * * Neither the name of JSR-310 nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| package java.time.temporal; |
| |
| import android.icu.text.DateTimePatternGenerator; |
| import android.icu.util.ULocale; |
| import java.time.DayOfWeek; |
| import java.time.Instant; |
| import java.time.Year; |
| import java.time.ZoneOffset; |
| import java.time.chrono.ChronoLocalDate; |
| import java.time.chrono.Chronology; |
| import java.util.Locale; |
| import java.util.Objects; |
| |
| import static java.time.temporal.ChronoUnit.DAYS; |
| import static java.time.temporal.ChronoUnit.ERAS; |
| import static java.time.temporal.ChronoUnit.FOREVER; |
| import static java.time.temporal.ChronoUnit.HALF_DAYS; |
| import static java.time.temporal.ChronoUnit.HOURS; |
| import static java.time.temporal.ChronoUnit.MICROS; |
| import static java.time.temporal.ChronoUnit.MILLIS; |
| import static java.time.temporal.ChronoUnit.MINUTES; |
| import static java.time.temporal.ChronoUnit.MONTHS; |
| import static java.time.temporal.ChronoUnit.NANOS; |
| import static java.time.temporal.ChronoUnit.SECONDS; |
| import static java.time.temporal.ChronoUnit.WEEKS; |
| import static java.time.temporal.ChronoUnit.YEARS; |
| |
| /** |
| * A standard set of fields. |
| * <p> |
| * This set of fields provide field-based access to manipulate a date, time or date-time. |
| * The standard set of fields can be extended by implementing {@link TemporalField}. |
| * <p> |
| * These fields are intended to be applicable in multiple calendar systems. |
| * For example, most non-ISO calendar systems define dates as a year, month and day, |
| * just with slightly different rules. |
| * The documentation of each field explains how it operates. |
| * |
| * @implSpec |
| * This is a final, immutable and thread-safe enum. |
| * |
| * @since 1.8 |
| */ |
| public enum ChronoField implements TemporalField { |
| |
| /** |
| * The nano-of-second. |
| * <p> |
| * This counts the nanosecond within the second, from 0 to 999,999,999. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * This field is used to represent the nano-of-second handling any fraction of the second. |
| * Implementations of {@code TemporalAccessor} should provide a value for this field if |
| * they can return a value for {@link #SECOND_OF_MINUTE}, {@link #SECOND_OF_DAY} or |
| * {@link #INSTANT_SECONDS} filling unknown precision with zero. |
| * <p> |
| * When this field is used for setting a value, it should set as much precision as the |
| * object stores, using integer division to remove excess precision. |
| * For example, if the {@code TemporalAccessor} stores time to millisecond precision, |
| * then the nano-of-second must be divided by 1,000,000 before replacing the milli-of-second. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The field is resolved in combination with {@code MILLI_OF_SECOND} and {@code MICRO_OF_SECOND}. |
| */ |
| NANO_OF_SECOND("NanoOfSecond", NANOS, SECONDS, ValueRange.of(0, 999_999_999)), |
| /** |
| * The nano-of-day. |
| * <p> |
| * This counts the nanosecond within the day, from 0 to (24 * 60 * 60 * 1,000,000,000) - 1. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * This field is used to represent the nano-of-day handling any fraction of the second. |
| * Implementations of {@code TemporalAccessor} should provide a value for this field if |
| * they can return a value for {@link #SECOND_OF_DAY} filling unknown precision with zero. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The value is split to form {@code NANO_OF_SECOND}, {@code SECOND_OF_MINUTE}, |
| * {@code MINUTE_OF_HOUR} and {@code HOUR_OF_DAY} fields. |
| */ |
| NANO_OF_DAY("NanoOfDay", NANOS, DAYS, ValueRange.of(0, 86400L * 1000_000_000L - 1)), |
| /** |
| * The micro-of-second. |
| * <p> |
| * This counts the microsecond within the second, from 0 to 999,999. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * This field is used to represent the micro-of-second handling any fraction of the second. |
| * Implementations of {@code TemporalAccessor} should provide a value for this field if |
| * they can return a value for {@link #SECOND_OF_MINUTE}, {@link #SECOND_OF_DAY} or |
| * {@link #INSTANT_SECONDS} filling unknown precision with zero. |
| * <p> |
| * When this field is used for setting a value, it should behave in the same way as |
| * setting {@link #NANO_OF_SECOND} with the value multiplied by 1,000. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The field is resolved in combination with {@code MILLI_OF_SECOND} to produce |
| * {@code NANO_OF_SECOND}. |
| */ |
| MICRO_OF_SECOND("MicroOfSecond", MICROS, SECONDS, ValueRange.of(0, 999_999)), |
| /** |
| * The micro-of-day. |
| * <p> |
| * This counts the microsecond within the day, from 0 to (24 * 60 * 60 * 1,000,000) - 1. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * This field is used to represent the micro-of-day handling any fraction of the second. |
| * Implementations of {@code TemporalAccessor} should provide a value for this field if |
| * they can return a value for {@link #SECOND_OF_DAY} filling unknown precision with zero. |
| * <p> |
| * When this field is used for setting a value, it should behave in the same way as |
| * setting {@link #NANO_OF_DAY} with the value multiplied by 1,000. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The value is split to form {@code MICRO_OF_SECOND}, {@code SECOND_OF_MINUTE}, |
| * {@code MINUTE_OF_HOUR} and {@code HOUR_OF_DAY} fields. |
| */ |
| MICRO_OF_DAY("MicroOfDay", MICROS, DAYS, ValueRange.of(0, 86400L * 1000_000L - 1)), |
| /** |
| * The milli-of-second. |
| * <p> |
| * This counts the millisecond within the second, from 0 to 999. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * This field is used to represent the milli-of-second handling any fraction of the second. |
| * Implementations of {@code TemporalAccessor} should provide a value for this field if |
| * they can return a value for {@link #SECOND_OF_MINUTE}, {@link #SECOND_OF_DAY} or |
| * {@link #INSTANT_SECONDS} filling unknown precision with zero. |
| * <p> |
| * When this field is used for setting a value, it should behave in the same way as |
| * setting {@link #NANO_OF_SECOND} with the value multiplied by 1,000,000. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The field is resolved in combination with {@code MICRO_OF_SECOND} to produce |
| * {@code NANO_OF_SECOND}. |
| */ |
| MILLI_OF_SECOND("MilliOfSecond", MILLIS, SECONDS, ValueRange.of(0, 999)), |
| /** |
| * The milli-of-day. |
| * <p> |
| * This counts the millisecond within the day, from 0 to (24 * 60 * 60 * 1,000) - 1. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * This field is used to represent the milli-of-day handling any fraction of the second. |
| * Implementations of {@code TemporalAccessor} should provide a value for this field if |
| * they can return a value for {@link #SECOND_OF_DAY} filling unknown precision with zero. |
| * <p> |
| * When this field is used for setting a value, it should behave in the same way as |
| * setting {@link #NANO_OF_DAY} with the value multiplied by 1,000,000. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The value is split to form {@code MILLI_OF_SECOND}, {@code SECOND_OF_MINUTE}, |
| * {@code MINUTE_OF_HOUR} and {@code HOUR_OF_DAY} fields. |
| */ |
| MILLI_OF_DAY("MilliOfDay", MILLIS, DAYS, ValueRange.of(0, 86400L * 1000L - 1)), |
| /** |
| * The second-of-minute. |
| * <p> |
| * This counts the second within the minute, from 0 to 59. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| */ |
| SECOND_OF_MINUTE("SecondOfMinute", SECONDS, MINUTES, ValueRange.of(0, 59), "second"), |
| /** |
| * The second-of-day. |
| * <p> |
| * This counts the second within the day, from 0 to (24 * 60 * 60) - 1. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The value is split to form {@code SECOND_OF_MINUTE}, {@code MINUTE_OF_HOUR} |
| * and {@code HOUR_OF_DAY} fields. |
| */ |
| SECOND_OF_DAY("SecondOfDay", SECONDS, DAYS, ValueRange.of(0, 86400L - 1)), |
| /** |
| * The minute-of-hour. |
| * <p> |
| * This counts the minute within the hour, from 0 to 59. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| */ |
| MINUTE_OF_HOUR("MinuteOfHour", MINUTES, HOURS, ValueRange.of(0, 59), "minute"), |
| /** |
| * The minute-of-day. |
| * <p> |
| * This counts the minute within the day, from 0 to (24 * 60) - 1. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The value is split to form {@code MINUTE_OF_HOUR} and {@code HOUR_OF_DAY} fields. |
| */ |
| MINUTE_OF_DAY("MinuteOfDay", MINUTES, DAYS, ValueRange.of(0, (24 * 60) - 1)), |
| /** |
| * The hour-of-am-pm. |
| * <p> |
| * This counts the hour within the AM/PM, from 0 to 11. |
| * This is the hour that would be observed on a standard 12-hour digital clock. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated from 0 to 11 in strict and smart mode. |
| * In lenient mode the value is not validated. It is combined with |
| * {@code AMPM_OF_DAY} to form {@code HOUR_OF_DAY} by multiplying |
| * the {AMPM_OF_DAY} value by 12. |
| */ |
| HOUR_OF_AMPM("HourOfAmPm", HOURS, HALF_DAYS, ValueRange.of(0, 11)), |
| /** |
| * The clock-hour-of-am-pm. |
| * <p> |
| * This counts the hour within the AM/PM, from 1 to 12. |
| * This is the hour that would be observed on a standard 12-hour analog wall clock. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated from 1 to 12 in strict mode and from |
| * 0 to 12 in smart mode. In lenient mode the value is not validated. |
| * The field is converted to an {@code HOUR_OF_AMPM} with the same value, |
| * unless the value is 12, in which case it is converted to 0. |
| */ |
| CLOCK_HOUR_OF_AMPM("ClockHourOfAmPm", HOURS, HALF_DAYS, ValueRange.of(1, 12)), |
| /** |
| * The hour-of-day. |
| * <p> |
| * This counts the hour within the day, from 0 to 23. |
| * This is the hour that would be observed on a standard 24-hour digital clock. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated in strict and smart mode but not in lenient mode. |
| * The field is combined with {@code MINUTE_OF_HOUR}, {@code SECOND_OF_MINUTE} and |
| * {@code NANO_OF_SECOND} to produce a {@code LocalTime}. |
| * In lenient mode, any excess days are added to the parsed date, or |
| * made available via {@link java.time.format.DateTimeFormatter#parsedExcessDays()}. |
| */ |
| HOUR_OF_DAY("HourOfDay", HOURS, DAYS, ValueRange.of(0, 23), "hour"), |
| /** |
| * The clock-hour-of-day. |
| * <p> |
| * This counts the hour within the AM/PM, from 1 to 24. |
| * This is the hour that would be observed on a 24-hour analog wall clock. |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated from 1 to 24 in strict mode and from |
| * 0 to 24 in smart mode. In lenient mode the value is not validated. |
| * The field is converted to an {@code HOUR_OF_DAY} with the same value, |
| * unless the value is 24, in which case it is converted to 0. |
| */ |
| CLOCK_HOUR_OF_DAY("ClockHourOfDay", HOURS, DAYS, ValueRange.of(1, 24)), |
| /** |
| * The am-pm-of-day. |
| * <p> |
| * This counts the AM/PM within the day, from 0 (AM) to 1 (PM). |
| * This field has the same meaning for all calendar systems. |
| * <p> |
| * When parsing this field it behaves equivalent to the following: |
| * The value is validated from 0 to 1 in strict and smart mode. |
| * In lenient mode the value is not validated. It is combined with |
| * {@code HOUR_OF_AMPM} to form {@code HOUR_OF_DAY} by multiplying |
| * the {AMPM_OF_DAY} value by 12. |
| */ |
| AMPM_OF_DAY("AmPmOfDay", HALF_DAYS, DAYS, ValueRange.of(0, 1), "dayperiod"), |
| /** |
| * The day-of-week, such as Tuesday. |
| * <p> |
| * This represents the standard concept of the day of the week. |
| * In the default ISO calendar system, this has values from Monday (1) to Sunday (7). |
| * The {@link DayOfWeek} class can be used to interpret the result. |
| * <p> |
| * Most non-ISO calendar systems also define a seven day week that aligns with ISO. |
| * Those calendar systems must also use the same numbering system, from Monday (1) to |
| * Sunday (7), which allows {@code DayOfWeek} to be used. |
| * <p> |
| * Calendar systems that do not have a standard seven day week should implement this field |
| * if they have a similar concept of named or numbered days within a period similar |
| * to a week. It is recommended that the numbering starts from 1. |
| */ |
| DAY_OF_WEEK("DayOfWeek", DAYS, WEEKS, ValueRange.of(1, 7), "weekday"), |
| /** |
| * The aligned day-of-week within a month. |
| * <p> |
| * This represents concept of the count of days within the period of a week |
| * where the weeks are aligned to the start of the month. |
| * This field is typically used with {@link #ALIGNED_WEEK_OF_MONTH}. |
| * <p> |
| * For example, in a calendar systems with a seven day week, the first aligned-week-of-month |
| * starts on day-of-month 1, the second aligned-week starts on day-of-month 8, and so on. |
| * Within each of these aligned-weeks, the days are numbered from 1 to 7 and returned |
| * as the value of this field. |
| * As such, day-of-month 1 to 7 will have aligned-day-of-week values from 1 to 7. |
| * And day-of-month 8 to 14 will repeat this with aligned-day-of-week values from 1 to 7. |
| * <p> |
| * Calendar systems that do not have a seven day week should typically implement this |
| * field in the same way, but using the alternate week length. |
| */ |
| ALIGNED_DAY_OF_WEEK_IN_MONTH("AlignedDayOfWeekInMonth", DAYS, WEEKS, ValueRange.of(1, 7)), |
| /** |
| * The aligned day-of-week within a year. |
| * <p> |
| * This represents concept of the count of days within the period of a week |
| * where the weeks are aligned to the start of the year. |
| * This field is typically used with {@link #ALIGNED_WEEK_OF_YEAR}. |
| * <p> |
| * For example, in a calendar systems with a seven day week, the first aligned-week-of-year |
| * starts on day-of-year 1, the second aligned-week starts on day-of-year 8, and so on. |
| * Within each of these aligned-weeks, the days are numbered from 1 to 7 and returned |
| * as the value of this field. |
| * As such, day-of-year 1 to 7 will have aligned-day-of-week values from 1 to 7. |
| * And day-of-year 8 to 14 will repeat this with aligned-day-of-week values from 1 to 7. |
| * <p> |
| * Calendar systems that do not have a seven day week should typically implement this |
| * field in the same way, but using the alternate week length. |
| */ |
| ALIGNED_DAY_OF_WEEK_IN_YEAR("AlignedDayOfWeekInYear", DAYS, WEEKS, ValueRange.of(1, 7)), |
| /** |
| * The day-of-month. |
| * <p> |
| * This represents the concept of the day within the month. |
| * In the default ISO calendar system, this has values from 1 to 31 in most months. |
| * April, June, September, November have days from 1 to 30, while February has days |
| * from 1 to 28, or 29 in a leap year. |
| * <p> |
| * Non-ISO calendar systems should implement this field using the most recognized |
| * day-of-month values for users of the calendar system. |
| * Normally, this is a count of days from 1 to the length of the month. |
| */ |
| DAY_OF_MONTH("DayOfMonth", DAYS, MONTHS, ValueRange.of(1, 28, 31), "day"), |
| /** |
| * The day-of-year. |
| * <p> |
| * This represents the concept of the day within the year. |
| * In the default ISO calendar system, this has values from 1 to 365 in standard |
| * years and 1 to 366 in leap years. |
| * <p> |
| * Non-ISO calendar systems should implement this field using the most recognized |
| * day-of-year values for users of the calendar system. |
| * Normally, this is a count of days from 1 to the length of the year. |
| * <p> |
| * Note that a non-ISO calendar system may have year numbering system that changes |
| * at a different point to the natural reset in the month numbering. An example |
| * of this is the Japanese calendar system where a change of era, which resets |
| * the year number to 1, can happen on any date. The era and year reset also cause |
| * the day-of-year to be reset to 1, but not the month-of-year or day-of-month. |
| */ |
| DAY_OF_YEAR("DayOfYear", DAYS, YEARS, ValueRange.of(1, 365, 366)), |
| /** |
| * The epoch-day, based on the Java epoch of 1970-01-01 (ISO). |
| * <p> |
| * This field is the sequential count of days where 1970-01-01 (ISO) is zero. |
| * Note that this uses the <i>local</i> time-line, ignoring offset and time-zone. |
| * <p> |
| * This field is strictly defined to have the same meaning in all calendar systems. |
| * This is necessary to ensure interoperation between calendars. |
| */ |
| EPOCH_DAY("EpochDay", DAYS, FOREVER, ValueRange.of((long) (Year.MIN_VALUE * 365.25), (long) (Year.MAX_VALUE * 365.25))), |
| /** |
| * The aligned week within a month. |
| * <p> |
| * This represents concept of the count of weeks within the period of a month |
| * where the weeks are aligned to the start of the month. |
| * This field is typically used with {@link #ALIGNED_DAY_OF_WEEK_IN_MONTH}. |
| * <p> |
| * For example, in a calendar systems with a seven day week, the first aligned-week-of-month |
| * starts on day-of-month 1, the second aligned-week starts on day-of-month 8, and so on. |
| * Thus, day-of-month values 1 to 7 are in aligned-week 1, while day-of-month values |
| * 8 to 14 are in aligned-week 2, and so on. |
| * <p> |
| * Calendar systems that do not have a seven day week should typically implement this |
| * field in the same way, but using the alternate week length. |
| */ |
| ALIGNED_WEEK_OF_MONTH("AlignedWeekOfMonth", WEEKS, MONTHS, ValueRange.of(1, 4, 5)), |
| /** |
| * The aligned week within a year. |
| * <p> |
| * This represents concept of the count of weeks within the period of a year |
| * where the weeks are aligned to the start of the year. |
| * This field is typically used with {@link #ALIGNED_DAY_OF_WEEK_IN_YEAR}. |
| * <p> |
| * For example, in a calendar systems with a seven day week, the first aligned-week-of-year |
| * starts on day-of-year 1, the second aligned-week starts on day-of-year 8, and so on. |
| * Thus, day-of-year values 1 to 7 are in aligned-week 1, while day-of-year values |
| * 8 to 14 are in aligned-week 2, and so on. |
| * <p> |
| * Calendar systems that do not have a seven day week should typically implement this |
| * field in the same way, but using the alternate week length. |
| */ |
| ALIGNED_WEEK_OF_YEAR("AlignedWeekOfYear", WEEKS, YEARS, ValueRange.of(1, 53)), |
| /** |
| * The month-of-year, such as March. |
| * <p> |
| * This represents the concept of the month within the year. |
| * In the default ISO calendar system, this has values from January (1) to December (12). |
| * <p> |
| * Non-ISO calendar systems should implement this field using the most recognized |
| * month-of-year values for users of the calendar system. |
| * Normally, this is a count of months starting from 1. |
| */ |
| MONTH_OF_YEAR("MonthOfYear", MONTHS, YEARS, ValueRange.of(1, 12), "month"), |
| /** |
| * The proleptic-month based, counting months sequentially from year 0. |
| * <p> |
| * This field is the sequential count of months where the first month |
| * in proleptic-year zero has the value zero. |
| * Later months have increasingly larger values. |
| * Earlier months have increasingly small values. |
| * There are no gaps or breaks in the sequence of months. |
| * Note that this uses the <i>local</i> time-line, ignoring offset and time-zone. |
| * <p> |
| * In the default ISO calendar system, June 2012 would have the value |
| * {@code (2012 * 12 + 6 - 1)}. This field is primarily for internal use. |
| * <p> |
| * Non-ISO calendar systems must implement this field as per the definition above. |
| * It is just a simple zero-based count of elapsed months from the start of proleptic-year 0. |
| * All calendar systems with a full proleptic-year definition will have a year zero. |
| * If the calendar system has a minimum year that excludes year zero, then one must |
| * be extrapolated in order for this method to be defined. |
| */ |
| PROLEPTIC_MONTH("ProlepticMonth", MONTHS, FOREVER, ValueRange.of(Year.MIN_VALUE * 12L, Year.MAX_VALUE * 12L + 11)), |
| /** |
| * The year within the era. |
| * <p> |
| * This represents the concept of the year within the era. |
| * This field is typically used with {@link #ERA}. |
| * <p> |
| * The standard mental model for a date is based on three concepts - year, month and day. |
| * These map onto the {@code YEAR}, {@code MONTH_OF_YEAR} and {@code DAY_OF_MONTH} fields. |
| * Note that there is no reference to eras. |
| * The full model for a date requires four concepts - era, year, month and day. These map onto |
| * the {@code ERA}, {@code YEAR_OF_ERA}, {@code MONTH_OF_YEAR} and {@code DAY_OF_MONTH} fields. |
| * Whether this field or {@code YEAR} is used depends on which mental model is being used. |
| * See {@link ChronoLocalDate} for more discussion on this topic. |
| * <p> |
| * In the default ISO calendar system, there are two eras defined, 'BCE' and 'CE'. |
| * The era 'CE' is the one currently in use and year-of-era runs from 1 to the maximum value. |
| * The era 'BCE' is the previous era, and the year-of-era runs backwards. |
| * <p> |
| * For example, subtracting a year each time yield the following:<br> |
| * - year-proleptic 2 = 'CE' year-of-era 2<br> |
| * - year-proleptic 1 = 'CE' year-of-era 1<br> |
| * - year-proleptic 0 = 'BCE' year-of-era 1<br> |
| * - year-proleptic -1 = 'BCE' year-of-era 2<br> |
| * <p> |
| * Note that the ISO-8601 standard does not actually define eras. |
| * Note also that the ISO eras do not align with the well-known AD/BC eras due to the |
| * change between the Julian and Gregorian calendar systems. |
| * <p> |
| * Non-ISO calendar systems should implement this field using the most recognized |
| * year-of-era value for users of the calendar system. |
| * Since most calendar systems have only two eras, the year-of-era numbering approach |
| * will typically be the same as that used by the ISO calendar system. |
| * The year-of-era value should typically always be positive, however this is not required. |
| */ |
| YEAR_OF_ERA("YearOfEra", YEARS, FOREVER, ValueRange.of(1, Year.MAX_VALUE, Year.MAX_VALUE + 1)), |
| /** |
| * The proleptic year, such as 2012. |
| * <p> |
| * This represents the concept of the year, counting sequentially and using negative numbers. |
| * The proleptic year is not interpreted in terms of the era. |
| * See {@link #YEAR_OF_ERA} for an example showing the mapping from proleptic year to year-of-era. |
| * <p> |
| * The standard mental model for a date is based on three concepts - year, month and day. |
| * These map onto the {@code YEAR}, {@code MONTH_OF_YEAR} and {@code DAY_OF_MONTH} fields. |
| * Note that there is no reference to eras. |
| * The full model for a date requires four concepts - era, year, month and day. These map onto |
| * the {@code ERA}, {@code YEAR_OF_ERA}, {@code MONTH_OF_YEAR} and {@code DAY_OF_MONTH} fields. |
| * Whether this field or {@code YEAR_OF_ERA} is used depends on which mental model is being used. |
| * See {@link ChronoLocalDate} for more discussion on this topic. |
| * <p> |
| * Non-ISO calendar systems should implement this field as follows. |
| * If the calendar system has only two eras, before and after a fixed date, then the |
| * proleptic-year value must be the same as the year-of-era value for the later era, |
| * and increasingly negative for the earlier era. |
| * If the calendar system has more than two eras, then the proleptic-year value may be |
| * defined with any appropriate value, although defining it to be the same as ISO may be |
| * the best option. |
| */ |
| YEAR("Year", YEARS, FOREVER, ValueRange.of(Year.MIN_VALUE, Year.MAX_VALUE), "year"), |
| /** |
| * The era. |
| * <p> |
| * This represents the concept of the era, which is the largest division of the time-line. |
| * This field is typically used with {@link #YEAR_OF_ERA}. |
| * <p> |
| * In the default ISO calendar system, there are two eras defined, 'BCE' and 'CE'. |
| * The era 'CE' is the one currently in use and year-of-era runs from 1 to the maximum value. |
| * The era 'BCE' is the previous era, and the year-of-era runs backwards. |
| * See {@link #YEAR_OF_ERA} for a full example. |
| * <p> |
| * Non-ISO calendar systems should implement this field to define eras. |
| * The value of the era that was active on 1970-01-01 (ISO) must be assigned the value 1. |
| * Earlier eras must have sequentially smaller values. |
| * Later eras must have sequentially larger values, |
| */ |
| ERA("Era", ERAS, FOREVER, ValueRange.of(0, 1), "era"), |
| /** |
| * The instant epoch-seconds. |
| * <p> |
| * This represents the concept of the sequential count of seconds where |
| * 1970-01-01T00:00Z (ISO) is zero. |
| * This field may be used with {@link #NANO_OF_SECOND} to represent the fraction of the second. |
| * <p> |
| * An {@link Instant} represents an instantaneous point on the time-line. |
| * On their own, an instant has insufficient information to allow a local date-time to be obtained. |
| * Only when paired with an offset or time-zone can the local date or time be calculated. |
| * <p> |
| * This field is strictly defined to have the same meaning in all calendar systems. |
| * This is necessary to ensure interoperation between calendars. |
| */ |
| INSTANT_SECONDS("InstantSeconds", SECONDS, FOREVER, ValueRange.of(Long.MIN_VALUE, Long.MAX_VALUE)), |
| /** |
| * The offset from UTC/Greenwich. |
| * <p> |
| * This represents the concept of the offset in seconds of local time from UTC/Greenwich. |
| * <p> |
| * A {@link ZoneOffset} represents the period of time that local time differs from UTC/Greenwich. |
| * This is usually a fixed number of hours and minutes. |
| * It is equivalent to the {@link ZoneOffset#getTotalSeconds() total amount} of the offset in seconds. |
| * For example, during the winter Paris has an offset of {@code +01:00}, which is 3600 seconds. |
| * <p> |
| * This field is strictly defined to have the same meaning in all calendar systems. |
| * This is necessary to ensure interoperation between calendars. |
| */ |
| OFFSET_SECONDS("OffsetSeconds", SECONDS, FOREVER, ValueRange.of(-18 * 3600, 18 * 3600)); |
| |
| private final String name; |
| private final TemporalUnit baseUnit; |
| private final TemporalUnit rangeUnit; |
| private final ValueRange range; |
| private final String displayNameKey; |
| |
| private ChronoField(String name, TemporalUnit baseUnit, TemporalUnit rangeUnit, ValueRange range) { |
| this.name = name; |
| this.baseUnit = baseUnit; |
| this.rangeUnit = rangeUnit; |
| this.range = range; |
| this.displayNameKey = null; |
| } |
| |
| private ChronoField(String name, TemporalUnit baseUnit, TemporalUnit rangeUnit, |
| ValueRange range, String displayNameKey) { |
| this.name = name; |
| this.baseUnit = baseUnit; |
| this.rangeUnit = rangeUnit; |
| this.range = range; |
| this.displayNameKey = displayNameKey; |
| } |
| |
| @Override |
| public String getDisplayName(Locale locale) { |
| Objects.requireNonNull(locale, "locale"); |
| if (displayNameKey == null) { |
| return name; |
| } |
| |
| // Android-changed: use ICU names. |
| DateTimePatternGenerator generator = DateTimePatternGenerator |
| .getFrozenInstance(ULocale.forLocale(locale)); |
| String icuName = generator.getAppendItemName(getIcuFieldNumber(this)); |
| return icuName != null && !icuName.isEmpty() ? icuName : name; |
| } |
| |
| /** |
| * @return the field id according to {@link DateTimePatternGenerator} for the field. |
| */ |
| private static int getIcuFieldNumber(ChronoField field) { |
| switch (field) { |
| case SECOND_OF_MINUTE: |
| return DateTimePatternGenerator.SECOND; |
| case MINUTE_OF_HOUR: |
| return DateTimePatternGenerator.MINUTE; |
| case HOUR_OF_DAY: |
| return DateTimePatternGenerator.HOUR; |
| case AMPM_OF_DAY: |
| return DateTimePatternGenerator.DAYPERIOD; |
| case DAY_OF_WEEK: |
| return DateTimePatternGenerator.WEEKDAY; |
| case DAY_OF_MONTH: |
| return DateTimePatternGenerator.DAY; |
| case MONTH_OF_YEAR: |
| return DateTimePatternGenerator.MONTH; |
| case YEAR: |
| return DateTimePatternGenerator.YEAR; |
| case ERA: |
| return DateTimePatternGenerator.ERA; |
| default: |
| throw new IllegalArgumentException("Unexpected ChronoField " + field.name()); |
| } |
| } |
| |
| @Override |
| public TemporalUnit getBaseUnit() { |
| return baseUnit; |
| } |
| |
| @Override |
| public TemporalUnit getRangeUnit() { |
| return rangeUnit; |
| } |
| |
| /** |
| * Gets the range of valid values for the field. |
| * <p> |
| * All fields can be expressed as a {@code long} integer. |
| * This method returns an object that describes the valid range for that value. |
| * <p> |
| * This method returns the range of the field in the ISO-8601 calendar system. |
| * This range may be incorrect for other calendar systems. |
| * Use {@link Chronology#range(ChronoField)} to access the correct range |
| * for a different calendar system. |
| * <p> |
| * Note that the result only describes the minimum and maximum valid values |
| * and it is important not to read too much into them. For example, there |
| * could be values within the range that are invalid for the field. |
| * |
| * @return the range of valid values for the field, not null |
| */ |
| @Override |
| public ValueRange range() { |
| return range; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Checks if this field represents a component of a date. |
| * <p> |
| * Fields from day-of-week to era are date-based. |
| * |
| * @return true if it is a component of a date |
| */ |
| @Override |
| public boolean isDateBased() { |
| return ordinal() >= DAY_OF_WEEK.ordinal() && ordinal() <= ERA.ordinal(); |
| } |
| |
| /** |
| * Checks if this field represents a component of a time. |
| * <p> |
| * Fields from nano-of-second to am-pm-of-day are time-based. |
| * |
| * @return true if it is a component of a time |
| */ |
| @Override |
| public boolean isTimeBased() { |
| return ordinal() < DAY_OF_WEEK.ordinal(); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Checks that the specified value is valid for this field. |
| * <p> |
| * This validates that the value is within the outer range of valid values |
| * returned by {@link #range()}. |
| * <p> |
| * This method checks against the range of the field in the ISO-8601 calendar system. |
| * This range may be incorrect for other calendar systems. |
| * Use {@link Chronology#range(ChronoField)} to access the correct range |
| * for a different calendar system. |
| * |
| * @param value the value to check |
| * @return the value that was passed in |
| */ |
| public long checkValidValue(long value) { |
| return range().checkValidValue(value, this); |
| } |
| |
| /** |
| * Checks that the specified value is valid and fits in an {@code int}. |
| * <p> |
| * This validates that the value is within the outer range of valid values |
| * returned by {@link #range()}. |
| * It also checks that all valid values are within the bounds of an {@code int}. |
| * <p> |
| * This method checks against the range of the field in the ISO-8601 calendar system. |
| * This range may be incorrect for other calendar systems. |
| * Use {@link Chronology#range(ChronoField)} to access the correct range |
| * for a different calendar system. |
| * |
| * @param value the value to check |
| * @return the value that was passed in |
| */ |
| public int checkValidIntValue(long value) { |
| return range().checkValidIntValue(value, this); |
| } |
| |
| //----------------------------------------------------------------------- |
| @Override |
| public boolean isSupportedBy(TemporalAccessor temporal) { |
| return temporal.isSupported(this); |
| } |
| |
| @Override |
| public ValueRange rangeRefinedBy(TemporalAccessor temporal) { |
| return temporal.range(this); |
| } |
| |
| @Override |
| public long getFrom(TemporalAccessor temporal) { |
| return temporal.getLong(this); |
| } |
| |
| @SuppressWarnings("unchecked") |
| @Override |
| public <R extends Temporal> R adjustInto(R temporal, long newValue) { |
| return (R) temporal.with(this, newValue); |
| } |
| |
| //----------------------------------------------------------------------- |
| @Override |
| public String toString() { |
| return name; |
| } |
| |
| } |