| /* Android console command implementation. |
| * |
| * Copyright (c) 2014 Linaro Limited |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "android-console.h" |
| #include "monitor/monitor.h" |
| #include "qemu/sockets.h" |
| #include "net/slirp.h" |
| #include "slirp/libslirp.h" |
| #include "qmp-commands.h" |
| #include "hw/misc/goldfish_battery.h" |
| #include "hw/input/goldfish_events.h" |
| #include "sysemu/sysemu.h" |
| #include "hmp.h" |
| |
| typedef struct { |
| int is_udp; |
| int host_port; |
| int guest_port; |
| } RedirRec; |
| |
| GList *redir_list; |
| |
| void android_monitor_print_error(Monitor *mon, const char *fmt, ...) |
| { |
| /* Print an error (typically a syntax error from the parser), with |
| * the required "KO: " prefix. |
| */ |
| va_list ap; |
| |
| monitor_printf(mon, "KO: "); |
| va_start(ap, fmt); |
| monitor_vprintf(mon, fmt, ap); |
| va_end(ap); |
| } |
| |
| void android_console_kill(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "OK: killing emulator, bye bye\n"); |
| monitor_suspend(mon); |
| qmp_quit(NULL); |
| } |
| |
| void android_console_quit(Monitor *mon, const QDict *qdict) |
| { |
| /* Don't print an OK response for success, just close the connection */ |
| if (monitor_disconnect(mon)) { |
| monitor_printf(mon, "KO: this connection doesn't support quitting\n"); |
| } |
| } |
| |
| #ifdef CONFIG_SLIRP |
| void android_console_redir_list(Monitor *mon, const QDict *qdict) |
| { |
| if (!redir_list) { |
| monitor_printf(mon, "no active redirections\n"); |
| } else { |
| GList *l; |
| |
| for (l = redir_list; l; l = l->next) { |
| RedirRec *r = l->data; |
| |
| monitor_printf(mon, "%s:%-5d => %-5d\n", r->is_udp ? "udp" : "tcp", |
| r->host_port, r->guest_port); |
| } |
| } |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| static int parse_proto(const char *s) |
| { |
| if (!strcmp(s, "tcp")) { |
| return 0; |
| } else if (!strcmp(s, "udp")) { |
| return 1; |
| } else { |
| return -1; |
| } |
| } |
| |
| static int parse_port(const char *s) |
| { |
| char *end; |
| int port; |
| |
| port = strtol(s, &end, 10); |
| if (*end != 0 || port < 1 || port > 65535) { |
| return 0; |
| } |
| return port; |
| } |
| |
| void android_console_redir_add(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_str(qdict, "arg"); |
| char **tokens; |
| int is_udp, host_port, guest_port; |
| Slirp *slirp; |
| Error *err = NULL; |
| struct in_addr host_addr = { .s_addr = htonl(INADDR_LOOPBACK) }; |
| struct in_addr guest_addr = { .s_addr = 0 }; |
| RedirRec *redir; |
| |
| slirp = net_slirp_lookup(NULL, NULL, &err); |
| if (err) { |
| monitor_printf(mon, "KO: %s\n", error_get_pretty(err)); |
| error_free(err); |
| return; |
| } |
| |
| /* Argument syntax: "proto:hostport:guestport" */ |
| tokens = g_strsplit(arg, ":", 0); |
| |
| if (g_strv_length(tokens) != 3) { |
| goto fail_syntax; |
| } |
| |
| is_udp = parse_proto(tokens[0]); |
| host_port = parse_port(tokens[1]); |
| guest_port = parse_port(tokens[2]); |
| |
| if (is_udp < 0 || host_port == 0 || guest_port == 0) { |
| goto fail_syntax; |
| } |
| |
| g_strfreev(tokens); |
| |
| if (slirp_add_hostfwd(slirp, is_udp, host_addr, host_port, |
| guest_addr, guest_port) < 0) { |
| monitor_printf(mon, "KO: can't setup redirection, " |
| "port probably used by another program on host\n"); |
| return; |
| } |
| |
| redir = g_new0(RedirRec, 1); |
| redir->is_udp = is_udp; |
| redir->host_port = host_port; |
| redir->guest_port = guest_port; |
| redir_list = g_list_append(redir_list, redir); |
| |
| monitor_printf(mon, "OK\n"); |
| return; |
| |
| fail_syntax: |
| monitor_printf(mon, "KO: bad redirection format, try " |
| "(tcp|udp):hostport:guestport\n"); |
| g_strfreev(tokens); |
| } |
| |
| static gint redir_cmp(gconstpointer a, gconstpointer b) |
| { |
| const RedirRec *ra = a; |
| const RedirRec *rb = b; |
| |
| /* For purposes of list deletion, only protocol and host port matter */ |
| if (ra->is_udp != rb->is_udp) { |
| return ra->is_udp - rb->is_udp; |
| } |
| return ra->host_port - rb->host_port; |
| } |
| |
| void android_console_redir_del(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_str(qdict, "arg"); |
| char **tokens; |
| int is_udp, host_port; |
| Slirp *slirp; |
| Error *err = NULL; |
| struct in_addr host_addr = { .s_addr = INADDR_ANY }; |
| RedirRec rr; |
| GList *entry; |
| |
| slirp = net_slirp_lookup(NULL, NULL, &err); |
| if (err) { |
| monitor_printf(mon, "KO: %s\n", error_get_pretty(err)); |
| error_free(err); |
| return; |
| } |
| |
| /* Argument syntax: "proto:hostport" */ |
| tokens = g_strsplit(arg, ":", 0); |
| |
| if (g_strv_length(tokens) != 2) { |
| goto fail_syntax; |
| } |
| |
| is_udp = parse_proto(tokens[0]); |
| host_port = parse_port(tokens[1]); |
| |
| if (is_udp < 0 || host_port == 0) { |
| goto fail_syntax; |
| } |
| |
| g_strfreev(tokens); |
| |
| rr.is_udp = is_udp; |
| rr.host_port = host_port; |
| entry = g_list_find_custom(redir_list, &rr, redir_cmp); |
| |
| if (!entry || slirp_remove_hostfwd(slirp, is_udp, host_addr, host_port)) { |
| monitor_printf(mon, "KO: can't remove unknown redirection (%s:%d)\n", |
| is_udp ? "udp" : "tcp", host_port); |
| return; |
| } |
| |
| g_free(entry->data); |
| redir_list = g_list_delete_link(redir_list, entry); |
| |
| monitor_printf(mon, "OK\n"); |
| return; |
| |
| fail_syntax: |
| monitor_printf(mon, "KO: bad redirection format, try (tcp|udp):hostport\n"); |
| g_strfreev(tokens); |
| } |
| |
| #else /* not CONFIG_SLIRP */ |
| void android_console_redir_list(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: emulator not built with CONFIG_SLIRP\n"); |
| } |
| |
| void android_console_redir_add(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: emulator not built with CONFIG_SLIRP\n"); |
| } |
| |
| void android_console_redir_remove(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: emulator not built with CONFIG_SLIRP\n"); |
| } |
| #endif |
| |
| enum { |
| CMD_REDIR, |
| CMD_REDIR_LIST, |
| CMD_REDIR_ADD, |
| CMD_REDIR_DEL, |
| }; |
| |
| static const char *redir_help[] = { |
| /* CMD_REDIR */ |
| "allows you to add, list and remove UDP and/or PORT redirection " |
| "from the host to the device\n" |
| "as an example, 'redir tcp:5000:6000' will route any packet sent " |
| "to the host's TCP port 5000\n" |
| "to TCP port 6000 of the emulated device\n" |
| "\n" |
| "available sub-commands:\n" |
| " list list current redirections\n" |
| " add add new redirection\n" |
| " del remove existing redirection\n", |
| /* CMD_REDIR_LIST */ |
| "list current port redirections. use 'redir add' and 'redir del' to add " |
| "and remove them", |
| /* CMD_REDIR_ADD */ |
| "add a new port redirection, arguments must be:\n" |
| "\n" |
| " redir add <protocol>:<host-port>:<guest-port>\n" |
| "\n" |
| "where: <protocol> is either 'tcp' or 'udp'\n" |
| " <host-port> a number indicating which " |
| "port on the host to open\n" |
| " <guest-port> a number indicating which " |
| "port to route to on the device\n" |
| "\n" |
| "as an example, 'redir tcp:5000:6000' will allow any packets sent to\n" |
| "the host's TCP port 5000 to be routed to TCP port 6000 of the " |
| "emulated device", |
| /* CMD_REDIR_DEL */ |
| "remove a port redirecion that was created with 'redir add', " |
| "arguments must be:\n" |
| " redir del <protocol>:<host-port>\n\n" |
| "see the 'help redir add' for the meaning of <protocol> and <host-port>", |
| }; |
| |
| void android_console_redir(Monitor *mon, const QDict *qdict) |
| { |
| /* This only gets called for bad subcommands and help requests */ |
| const char *helptext = qdict_get_try_str(qdict, "helptext"); |
| |
| /* Default to the first entry which is the parent help message */ |
| int cmd = CMD_REDIR; |
| |
| if (helptext) { |
| if (strstr(helptext, "add")) { |
| cmd = CMD_REDIR_ADD; |
| } else if (strstr(helptext, "del")) { |
| cmd = CMD_REDIR_DEL; |
| } else if (strstr(helptext, "list")) { |
| cmd = CMD_REDIR_LIST; |
| } |
| } |
| |
| /* If this is not a help request then we are here with a bad sub-command */ |
| monitor_printf(mon, "%s\n%s\n", redir_help[cmd], |
| helptext ? "OK" : "KO: missing sub-command"); |
| } |
| |
| void android_console_power_display(Monitor *mon, const QDict *qdict) |
| { |
| goldfish_battery_display(mon); |
| |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| void android_console_power_ac(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| if (arg) { |
| if (strcasecmp(arg, "on") == 0) { |
| goldfish_battery_set_prop(1, POWER_SUPPLY_PROP_ONLINE, 1); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "off") == 0) { |
| goldfish_battery_set_prop(1, POWER_SUPPLY_PROP_ONLINE, 0); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| } |
| |
| monitor_printf(mon, "KO: Usage: \"ac on\" or \"ac off\"\n"); |
| } |
| |
| void android_console_power_status(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| if (arg) { |
| if (strcasecmp(arg, "unknown") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_STATUS_UNKNOWN); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } else if (strcasecmp(arg, "charging") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_STATUS_CHARGING); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } else if (strcasecmp(arg, "discharging") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_STATUS_DISCHARGING); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } else if (strcasecmp(arg, "not-charging") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_STATUS_NOT_CHARGING); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } else if (strcasecmp(arg, "full") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_STATUS_FULL); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| } |
| |
| monitor_printf(mon, "KO: Usage: \"status unknown|charging|" |
| "discharging|not-charging|full\"\n"); |
| } |
| |
| void android_console_power_present(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| if (arg) { |
| if (strcasecmp(arg, "true") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_PRESENT, 1); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "false") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_PRESENT, 0); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| } |
| |
| monitor_printf(mon, "KO: Usage: \"present true\" or \"present false\"\n"); |
| } |
| |
| void android_console_power_health(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| if (arg) { |
| if (strcasecmp(arg, "unknown") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_HEALTH_UNKNOWN); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "good") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_HEALTH_GOOD); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "overheat") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_HEALTH_OVERHEAT); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "dead") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_HEALTH_DEAD); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "overvoltage") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_HEALTH_OVERVOLTAGE); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| if (strcasecmp(arg, "failure") == 0) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_HEALTH_UNSPEC_FAILURE); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| } |
| |
| monitor_printf(mon, "KO: Usage: \"health unknown|good|overheat|" |
| "dead|overvoltage|failure\"\n"); |
| } |
| |
| void android_console_power_capacity(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| if (arg) { |
| int capacity; |
| |
| if (sscanf(arg, "%d", &capacity) == 1 && |
| capacity >= 0 && capacity <= 100) { |
| goldfish_battery_set_prop(0, POWER_SUPPLY_PROP_CAPACITY, capacity); |
| monitor_printf(mon, "OK\n"); |
| return; |
| } |
| } |
| |
| monitor_printf(mon, "KO: Usage: \"capacity <percentage>\"\n"); |
| } |
| |
| enum { |
| CMD_POWER, |
| CMD_POWER_DISPLAY, |
| CMD_POWER_AC, |
| CMD_POWER_STATUS, |
| CMD_POWER_PRESENT, |
| CMD_POWER_HEALTH, |
| CMD_POWER_CAPACITY, |
| }; |
| |
| static const char *power_help[] = { |
| /* CMD_POWER */ |
| "allows to change battery and AC power status\n" |
| "\n" |
| "available sub-commands:\n" |
| " power display display battery and charger state\n" |
| " power ac set AC charging state\n" |
| " power status set battery status\n" |
| " power present set battery present state\n" |
| " power health set battery health state\n" |
| " power capacity set battery capacity state\n", |
| /* CMD_POWER_DISPLAY */ |
| "display battery and charger state", |
| /* CMD_POWER_AC */ |
| "'ac on|off' allows you to set the AC charging state to on or off", |
| /* CMD_POWER_STATUS */ |
| "'status unknown|charging|discharging|not-charging|full' allows you " |
| "to set battery status", |
| /* CMD_POWER_PRESENT */ |
| "'present true|false' allows you to set battery present state to true " |
| "or false", |
| /* CMD_POWER_HEALTH */ |
| "'health unknown|good|overheat|dead|overvoltage|failure' allows you " |
| "to set battery health state", |
| /* CMD_POWER_CAPACITY */ |
| "'capacity <percentage>' allows you to set battery capacity to a " |
| "value 0 - 100", |
| }; |
| |
| void android_console_power(Monitor *mon, const QDict *qdict) |
| { |
| /* This only gets called for bad subcommands and help requests */ |
| const char *helptext = qdict_get_try_str(qdict, "helptext"); |
| |
| /* Default to the first entry which is the parent help message */ |
| int cmd = CMD_POWER; |
| |
| /* In the below command name parsing, "capacity" has to precede "ac" |
| * otherwise we will hit on "ac" first. |
| */ |
| if (helptext) { |
| if (strstr(helptext, "display")) { |
| cmd = CMD_POWER_DISPLAY; |
| } else if (strstr(helptext, "capacity")) { |
| cmd = CMD_POWER_CAPACITY; |
| } else if (strstr(helptext, "ac")) { |
| cmd = CMD_POWER_AC; |
| } else if (strstr(helptext, "status")) { |
| cmd = CMD_POWER_STATUS; |
| } else if (strstr(helptext, "present")) { |
| cmd = CMD_POWER_PRESENT; |
| } else if (strstr(helptext, "health")) { |
| cmd = CMD_POWER_HEALTH; |
| } |
| } |
| |
| /* If this is not a help request then we are here with a bad sub-command */ |
| monitor_printf(mon, "%s\n%s\n", power_help[cmd], |
| helptext ? "OK" : "KO: missing sub-command"); |
| |
| } |
| |
| enum { |
| CMD_EVENT, |
| CMD_EVENT_TYPES, |
| CMD_EVENT_CODES, |
| CMD_EVENT_SEND, |
| CMD_EVENT_TEXT, |
| }; |
| |
| static const char *event_help[] = { |
| /* CMD_EVENT */ |
| "allows you to send fake hardware events to the kernel\n" |
| "\n" |
| "available sub-commands:\n" |
| " event send send a series of events to the kernel\n" |
| " event types list all <type> aliases\n" |
| " event codes list all <code> aliases for a given <type>\n" |
| " event text simulate keystrokes from a given text\n", |
| /* CMD_EVENT_TYPES */ |
| "'event types' list all <type> string aliases supported by the " |
| "'event' subcommands", |
| /* CMD_EVENT_CODES */ |
| "'event codes <type>' lists all <code> string aliases for a given " |
| "event <type>", |
| /* CMD_EVENT_SEND */ |
| "'event send <type>:<code>:<value> ...' allows your to send one or " |
| "more hardware events\nto the Android kernel. you can use text names " |
| "or integers for <type> and <code>", |
| /* CMD_EVENT_TEXT */ |
| "'event text <message>' allows you to simulate keypresses to generate " |
| "a given text\nmessage. <message> must be an utf-8 string. Unicode " |
| "points will be reverse-mapped\naccording to the current device " |
| "keyboard. unsupported characters will be discarded\nsilently", |
| }; |
| |
| void android_console_event_types(Monitor *mon, const QDict *qdict) |
| { |
| int count = gf_get_event_type_count(); |
| int nn; |
| |
| monitor_printf(mon, "event <type> can be an integer or one of the" |
| "following aliases\n"); |
| |
| /* Loop through and print out each type found along with the count of alias |
| * codes if any. |
| */ |
| for (nn = 0; nn < count; nn++) { |
| char tmp[16]; |
| char *p = tmp; |
| int code_count; |
| gf_get_event_type_name(nn, p); |
| |
| code_count = gf_get_event_code_count(p); |
| |
| monitor_printf(mon, " %-8s", p); |
| |
| if (code_count > 0) { |
| monitor_printf(mon, " (%d code aliases)", code_count); |
| } |
| |
| monitor_printf(mon, "\n"); |
| } |
| |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| void android_console_event_codes(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| int count, nn; |
| |
| if (!arg) { |
| monitor_printf(mon, "KO: argument missing, try 'event codes <type>'\n"); |
| return; |
| } |
| |
| count = gf_get_event_code_count(arg); |
| |
| /* If the type is invalid then bail */ |
| if (count < 0) { |
| monitor_printf(mon, |
| "KO: bad argument, see 'event types' for valid values\n"); |
| return; |
| } |
| |
| if (count == 0) { |
| monitor_printf(mon, "no code aliases defined for this type\n"); |
| } else { |
| monitor_printf(mon, "type '%s' accepts the following <code> aliases:\n", |
| arg); |
| for (nn = 0; nn < count; nn++) { |
| char temp[20], *p = temp; |
| gf_get_event_code_name(arg, nn, p); |
| monitor_printf(mon, " %-12s\r\n", p); |
| } |
| } |
| |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| void android_console_event_send(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| char **substr; |
| int type, code, value = -1; |
| |
| if (!arg) { |
| monitor_printf(mon, |
| "KO: Usage: event send <type>:<code>:<value> ...\n"); |
| return; |
| } |
| |
| substr = g_strsplit(arg, ":", 3); |
| |
| /* The event type can be a symbol or number. Check that we have a valid |
| * type string and get the value depending on its format. |
| */ |
| if (g_ascii_isdigit(*substr[0])) { |
| type = g_ascii_strtoull(substr[0], NULL, 0); |
| } else { |
| type = gf_get_event_type_value(substr[0]); |
| } |
| if (type == -1) { |
| monitor_printf(mon, "KO: invalid event type in '%s', try 'event " |
| "list types' for valid values\n", arg); |
| goto out; |
| } |
| |
| /* The event code can be a symbol or number. Check that we have a valid |
| * code string and get the value depending on its format. |
| */ |
| if (g_ascii_isdigit(*substr[1])) { |
| code = g_ascii_strtoull(substr[1], NULL, 0); |
| } else { |
| code = gf_get_event_code_value(type, substr[1]); |
| } |
| if (code == -1) { |
| monitor_printf(mon, "KO: invalid event code in '%s', try 'event list " |
| "codes <type>' for valid values\n", arg); |
| goto out; |
| } |
| |
| /* The event value can only be a numeric value. Check that the value |
| * string is value and convert it. |
| */ |
| if (!substr[2] || !g_ascii_isdigit(*substr[2])) { |
| monitor_printf(mon, "KO: invalid event value in '%s', must be an " |
| "integer\n", arg); |
| goto out; |
| } |
| value = g_ascii_strtoull(substr[2], NULL, 0); |
| |
| gf_event_send(type, code, value); |
| |
| monitor_printf(mon, "OK\n"); |
| |
| out: |
| g_strfreev(substr); |
| } |
| |
| void android_console_event_text(Monitor *mon, const QDict *qdict) |
| { |
| const char *arg = qdict_get_try_str(qdict, "arg"); |
| |
| if (!arg) { |
| monitor_printf(mon, |
| "KO: argument missing, try 'event text <message>'\n"); |
| return; |
| } |
| |
| monitor_printf(mon, "KO: 'event text' is currently unsupported\n"); |
| } |
| |
| void android_console_event(Monitor *mon, const QDict *qdict) |
| { |
| /* This only gets called for bad subcommands and help requests */ |
| const char *helptext = qdict_get_try_str(qdict, "helptext"); |
| |
| /* Default to the first entry which is the parent help message */ |
| int cmd = CMD_EVENT; |
| |
| if (helptext) { |
| if (strstr(helptext, "types")) { |
| cmd = CMD_EVENT_TYPES; |
| } else if (strstr(helptext, "codes")) { |
| cmd = CMD_EVENT_CODES; |
| } else if (strstr(helptext, "send")) { |
| cmd = CMD_EVENT_SEND; |
| } else if (strstr(helptext, "text")) { |
| cmd = CMD_EVENT_TEXT; |
| } |
| } |
| |
| /* If this is not a help request then we are here with a bad sub-command */ |
| monitor_printf(mon, "%s\n%s\n", event_help[cmd], |
| helptext ? "OK" : "KO: missing sub-command"); |
| } |
| |
| enum { |
| CMD_AVD, |
| CMD_AVD_STOP, |
| CMD_AVD_START, |
| CMD_AVD_STATUS, |
| CMD_AVD_NAME, |
| CMD_AVD_SNAPSHOT, |
| CMD_AVD_SNAPSHOT_LIST, |
| CMD_AVD_SNAPSHOT_SAVE, |
| CMD_AVD_SNAPSHOT_LOAD, |
| CMD_AVD_SNAPSHOT_DEL, |
| }; |
| |
| static const char *avd_help[] = { |
| /* CMD_AVD */ |
| "allows you to control (e.g. start/stop) the execution of the virtual " |
| "device\n" |
| "\n" |
| "available sub-commands:\n" |
| " avd stop stop the virtual device\n" |
| " avd start start/restart the virtual device\n" |
| " avd status query virtual device status\n" |
| " avd name query virtual device name\n" |
| " avd snapshot state snapshot commands\n", |
| /* CMD_AVD_STOP */ |
| "'avd stop' stops the virtual device immediately, use 'avd start' to " |
| "continue execution", |
| /* CMD_AVD_START */ |
| "'avd start' will start or continue the virtual device, use 'avd stop' to " |
| "stop it", |
| /* CMD_AVD_STATUS */ |
| "'avd status' will indicate whether the virtual device is running or not", |
| /* CMD_AVD_NAME */ |
| "'avd name' will return the name of this virtual device", |
| /* CMD_AVD_SNAPSHOT */ |
| "allows you to save and restore the virtual device state in snapshots\n" |
| "\n" |
| "available sub-commands:\n" |
| " avd snapshot list list available state snapshots\n" |
| " avd snapshot save save state snapshot\n" |
| " avd snapshot load load state snapshot\n" |
| " avd snapshot del delete state snapshot\n", |
| /* CMD_AVD_SNAPSHOT_LIST */ |
| "'avd snapshot list' will show a list of all state snapshots that can be " |
| "loaded", |
| /* CMD_AVD_SNAPSHOT_SAVE */ |
| "'avd snapshot save <name>' will save the current (run-time) state to a " |
| "snapshot with the given name", |
| /* CMD_AVD_SNAPSHOT_LOAD */ |
| "'avd snapshot load <name>' will load the state snapshot of the given " |
| "name", |
| /* CMD_AVD_SNAPSHOT_DEL */ |
| "'avd snapshot del <name>' will delete the state snapshot with the given " |
| "name", |
| }; |
| |
| void android_console_avd_stop(Monitor *mon, const QDict *qdict) |
| { |
| if (!runstate_is_running()) { |
| monitor_printf(mon, "KO: virtual device already stopped\n"); |
| return; |
| } |
| |
| qmp_stop(NULL); |
| |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| void android_console_avd_start(Monitor *mon, const QDict *qdict) |
| { |
| if (runstate_is_running()) { |
| monitor_printf(mon, "KO: virtual device already running\n"); |
| return; |
| } |
| |
| qmp_cont(NULL); |
| |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| void android_console_avd_status(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "virtual device is %s\n", |
| runstate_is_running() ? "running" : "stopped"); |
| |
| monitor_printf(mon, "OK\n"); |
| } |
| |
| void android_console_avd_name(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: 'avd name' is currently unsupported\n"); |
| } |
| |
| void android_console_avd_snapshot(Monitor *mon, const QDict *qdict) |
| { |
| /* This only gets called for bad subcommands and help requests */ |
| const char *helptext = qdict_get_try_str(qdict, "helptext"); |
| |
| /* Default to the first entry which is the snapshot help message */ |
| int cmd = CMD_AVD_SNAPSHOT; |
| |
| if (helptext) { |
| if (strstr(helptext, "list")) { |
| cmd = CMD_AVD_SNAPSHOT_LIST; |
| } else if (strstr(helptext, "save")) { |
| cmd = CMD_AVD_SNAPSHOT_SAVE; |
| } else if (strstr(helptext, "load")) { |
| cmd = CMD_AVD_SNAPSHOT_LOAD; |
| } else if (strstr(helptext, "del")) { |
| cmd = CMD_AVD_SNAPSHOT_DEL; |
| } |
| } |
| |
| /* If this is not a help request then we are here with a bad sub-command */ |
| monitor_printf(mon, "%s\n%s\n", avd_help[cmd], |
| helptext ? "OK" : "KO: missing sub-command"); |
| } |
| |
| void android_console_avd_snapshot_list(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: 'avd snapshot list' is currently unsupported\n"); |
| } |
| |
| void android_console_avd_snapshot_save(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: 'avd snapshot save' is currently unsupported\n"); |
| } |
| |
| void android_console_avd_snapshot_load(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: 'avd snapshot load' is currently unsupported\n"); |
| } |
| |
| void android_console_avd_snapshot_del(Monitor *mon, const QDict *qdict) |
| { |
| monitor_printf(mon, "KO: 'avd snapshot del' is currently unsupported\n"); |
| } |
| |
| void android_console_avd(Monitor *mon, const QDict *qdict) |
| { |
| /* This only gets called for bad subcommands and help requests */ |
| const char *helptext = qdict_get_try_str(qdict, "helptext"); |
| |
| /* Default to the first entry which is the parent help message */ |
| int cmd = CMD_AVD; |
| |
| if (helptext) { |
| if (strstr(helptext, "stop")) { |
| cmd = CMD_AVD_STOP; |
| } else if (strstr(helptext, "start")) { |
| cmd = CMD_AVD_START; |
| } else if (strstr(helptext, "status")) { |
| cmd = CMD_AVD_STATUS; |
| } else if (strstr(helptext, "name")) { |
| cmd = CMD_AVD_NAME; |
| } |
| } |
| |
| /* If this is not a help request then we are here with a bad sub-command */ |
| monitor_printf(mon, "%s\n%s\n", avd_help[cmd], |
| helptext ? "OK" : "KO: missing sub-command"); |
| } |