| #!/usr/bin/env python3 |
| # |
| # Copyright (c) 2020, The OpenThread Authors. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of the copyright holder nor the |
| # names of its contributors may be used to endorse or promote products |
| # derived from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| |
| import unittest |
| |
| import config |
| import copy |
| import mle |
| import network_diag |
| import network_layer |
| import thread_cert |
| from network_diag import TlvType |
| from pktverify.consts import DIAG_RST_URI, DIAG_GET_URI, DG_MAC_EXTENDED_ADDRESS_TLV, DG_MAC_ADDRESS_TLV, DG_MODE_TLV, DG_CONNECTIVITY_TLV, DG_ROUTE64_TLV, DG_LEADER_DATA_TLV, DG_NETWORK_DATA_TLV, DG_IPV6_ADDRESS_LIST_TLV, DG_CHANNEL_PAGES_TLV, DG_TYPE_LIST_TLV, DG_MAC_COUNTERS_TLV, DG_TIMEOUT_TLV, DG_BATTERY_LEVEL_TLV, DG_SUPPLY_VOLTAGE_TLV, DG_CHILD_TABLE_TLV, DG_CHILD_TABLE_TLV |
| from pktverify.packet_verifier import PacketVerifier |
| from pktverify.null_field import nullField |
| |
| LEADER = 1 |
| ROUTER1 = 2 |
| REED1 = 3 |
| SED1 = 4 |
| MED1 = 5 |
| FED1 = 6 |
| |
| MTDS = [MED1, SED1] |
| |
| # Test Purpose and Description: |
| # ----------------------------- |
| # These cases test the Diagnostic Get and Reset Commands as a part of the |
| # Network Management |
| # |
| # Test Topology: |
| # ------------- |
| # Leader |
| # | |
| # FED - Router - REED |
| # / \ |
| # MED SED |
| # |
| # DUT Types: |
| # ---------- |
| # Router |
| # FED |
| |
| |
| class Cert_5_7_01_CoapDiagCommands_Base(thread_cert.TestCase): |
| USE_MESSAGE_FACTORY = False |
| SUPPORT_NCP = False |
| |
| TOPOLOGY = { |
| LEADER: { |
| 'name': 'LEADER', |
| 'mode': 'rdn', |
| 'allowlist': [ROUTER1], |
| }, |
| ROUTER1: { |
| 'mode': 'rdn', |
| 'allowlist': [LEADER, REED1, SED1, MED1, FED1], |
| }, |
| REED1: { |
| 'name': 'REED', |
| 'mode': 'rdn', |
| 'allowlist': [ROUTER1], |
| 'router_upgrade_threshold': 0 |
| }, |
| SED1: { |
| 'name': 'SED', |
| 'is_mtd': True, |
| 'mode': '-', |
| 'allowlist': [ROUTER1], |
| 'timeout': config.DEFAULT_CHILD_TIMEOUT |
| }, |
| MED1: { |
| 'name': 'MED', |
| 'is_mtd': True, |
| 'mode': 'rn', |
| 'allowlist': [ROUTER1] |
| }, |
| FED1: { |
| 'allowlist': [ROUTER1], |
| 'router_upgrade_threshold': 0 |
| }, |
| } |
| |
| def test(self): |
| # 1 - Form topology |
| self.nodes[LEADER].start() |
| self.simulator.go(config.LEADER_STARTUP_DELAY) |
| self.assertEqual(self.nodes[LEADER].get_state(), 'leader') |
| |
| self.nodes[ROUTER1].start() |
| self.simulator.go(config.ROUTER_STARTUP_DELAY) |
| self.assertEqual(self.nodes[ROUTER1].get_state(), 'router') |
| |
| for i in range(3, 7): |
| self.nodes[i].start() |
| self.simulator.go(10) |
| self.assertEqual(self.nodes[i].get_state(), 'child') |
| |
| self.simulator.go(config.MAX_ADVERTISEMENT_INTERVAL) |
| |
| self.collect_rlocs() |
| self.collect_rloc16s() |
| self.collect_ipaddrs() |
| |
| DUT = ROUTER1 |
| if self.TOPOLOGY[FED1]['name'] == 'DUT': |
| DUT = FED1 |
| |
| dut_rloc = self.nodes[DUT].get_ip6_address(config.ADDRESS_TYPE.RLOC) |
| |
| # 2 - Leader sends DIAG_GET.req |
| tlv_types = [ |
| TlvType.EXT_ADDRESS, TlvType.ADDRESS16, TlvType.MODE, TlvType.CONNECTIVITY, TlvType.ROUTE64, |
| TlvType.LEADER_DATA, TlvType.NETWORK_DATA, TlvType.IPV6_ADDRESS_LIST, TlvType.CHANNEL_PAGES |
| ] |
| self.nodes[LEADER].send_network_diag_get(dut_rloc, tlv_types) |
| self.simulator.go(2) |
| |
| # 3 - Leader sends DIAG_GET.req (MAC Counters TLV type included) |
| self.nodes[LEADER].send_network_diag_get(dut_rloc, [TlvType.MAC_COUNTERS]) |
| self.simulator.go(2) |
| |
| # 4 - Leader sends DIAG_GET.req (Timeout/Polling Period TLV type included) |
| self.nodes[LEADER].send_network_diag_get(dut_rloc, [TlvType.POLLING_PERIOD]) |
| self.simulator.go(2) |
| |
| # 5 - Leader sends DIAG_GET.req (Battery Level and Supply Voltage TLV types included) |
| self.nodes[LEADER].send_network_diag_get(dut_rloc, [TlvType.BATTERY_LEVEL, TlvType.SUPPLY_VOLTAGE]) |
| self.simulator.go(2) |
| |
| # 6 - Leader sends DIAG_GET.req (Child Table TLV types included) |
| self.nodes[LEADER].send_network_diag_get(dut_rloc, [TlvType.CHILD_TABLE]) |
| self.simulator.go(2) |
| |
| # 7 - Leader sends DIAG_RST.ntf (MAC Counters TLV type included) |
| self.nodes[LEADER].send_network_diag_reset(dut_rloc, [TlvType.MAC_COUNTERS]) |
| self.simulator.go(2) |
| |
| # 8 - Leader Sends DIAG_GET.req (MAC Counters TLV type included) |
| self.nodes[LEADER].send_network_diag_get(dut_rloc, [TlvType.MAC_COUNTERS]) |
| self.simulator.go(2) |
| |
| def verify(self, pv): |
| pkts = pv.pkts |
| pv.summary.show() |
| |
| LEADER = pv.vars['LEADER'] |
| LEADER_RLOC = pv.vars['LEADER_RLOC'] |
| DUT = pv.vars['DUT'] |
| DUT_RLOC = pv.vars['DUT_RLOC'] |
| DUT_RLOC16 = pv.vars['DUT_RLOC16'] |
| REED = pv.vars['REED'] |
| REED_RLOC = pv.vars['REED_RLOC'] |
| MED = pv.vars['MED'] |
| MED_RLOC = pv.vars['MED_RLOC'] |
| SED = pv.vars['SED'] |
| SED_RLOC = pv.vars['SED_RLOC'] |
| MM = pv.vars['MM_PORT'] |
| |
| #DUT_IPADDR = |
| |
| # Step 1: Ensure topology is formed correctly |
| if self.TOPOLOGY[ROUTER1]['name'] == 'DUT': |
| FED = pv.vars['FED'] |
| pv.verify_attached('DUT', 'LEADER') |
| pv.verify_attached('REED', 'DUT') |
| pv.verify_attached('SED', 'DUT', 'MTD') |
| pv.verify_attached('MED', 'DUT', 'MTD') |
| pv.verify_attached('FED', 'DUT', 'FTD-ED') |
| else: |
| ROUTER = pv.vars['ROUTER'] |
| pv.verify_attached('ROUTER', 'LEADER') |
| pv.verify_attached('REED', 'ROUTER') |
| pv.verify_attached('SED', 'ROUTER', 'MTD') |
| pv.verify_attached('MED', 'ROUTER', 'MTD') |
| pv.verify_attached('DUT', 'ROUTER', 'FTD-ED') |
| |
| # Step 2: Leader to send DIAG_GET.req to DUT’s RLOC. |
| # The DUT MUST respond with a DIAG_GET.rsp response containing |
| # the requested diagnostic TLVs: |
| # CoAP Response Code |
| # 2.04 Changed |
| # CoAP Payload |
| # TLV Type 0 - MAC Extended Address (64- bit) |
| # TLV Type 1 - MAC Address (16-bit) |
| # TLV Type 2 - Mode (Capability information) |
| # TLV Type 4 – Connectivity |
| # TLV Type 5 – Route64 |
| # TLV Type 6 – Leader Data |
| # TLV Type 7 – Network Data |
| # TLV Type 8 – IPv6 address list |
| # TLV Type 17 – Channel Pages |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_MAC_EXTENDED_ADDRESS_TLV, |
| DG_MAC_ADDRESS_TLV, |
| DG_MODE_TLV, |
| DG_CONNECTIVITY_TLV, |
| DG_ROUTE64_TLV, |
| DG_LEADER_DATA_TLV, |
| DG_NETWORK_DATA_TLV, |
| DG_IPV6_ADDRESS_LIST_TLV, |
| DG_CHANNEL_PAGES_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_MAC_EXTENDED_ADDRESS_TLV, |
| DG_MAC_ADDRESS_TLV, |
| DG_MODE_TLV, |
| DG_CONNECTIVITY_TLV, |
| DG_ROUTE64_TLV, |
| DG_LEADER_DATA_TLV, |
| DG_NETWORK_DATA_TLV, |
| DG_IPV6_ADDRESS_LIST_TLV, |
| DG_CHANNEL_PAGES_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| |
| # Step 3: Leader to send DIAG_GET.req to DUT’s RLOC. |
| # The DUT MUST respond with a DIAG_GET.rsp response containing |
| # the requested diagnostic TLVs: |
| # CoAP Response Code |
| # 2.04 Changed |
| # CoAP Payload |
| # TLV Type 9 - MAC Counters |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_MAC_COUNTERS_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_MAC_COUNTERS_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| |
| # Step 4: Leader to send DIAG_GET.req to DUT’s RLOC. |
| # The DUT MUST respond with a DIAG_GET.rsp response containing |
| # the requested diagnostic TLVs: |
| # CoAP Response Code |
| # 2.04 Changed |
| # CoAP Payload |
| # TLV Type 3 - Timeout MUST be omitted from the response |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_TIMEOUT_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: p.thread_diagnostic.tlv.type is nullField).\ |
| must_next() |
| |
| # Step 5: Leader to send DIAG_GET.req to DUT’s RLOC. |
| # The DUT MUST respond with a DIAG_GET.rsp response containing |
| # the requested diagnostic TLVs: |
| # CoAP Response Code |
| # 2.04 Changed |
| # CoAP Payload |
| # TLV Type 3 - Timeout MUST be omitted from the response |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_BATTERY_LEVEL_TLV, |
| DG_SUPPLY_VOLTAGE_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: p.thread_diagnostic.tlv.type is nullField).\ |
| must_next() |
| |
| # Step 6: Leader to send DIAG_GET.req to DUT’s RLOC. |
| # The DUT MUST respond with a DIAG_GET.rsp response containing |
| # the requested diagnostic TLVs: |
| # CoAP Response Code |
| # 2.04 Changed |
| # CoAP Payload |
| # TLV Type 16 - Child Table (is empty if FED is DUT) |
| # |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_CHILD_TABLE_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| |
| if self.TOPOLOGY[ROUTER1]['name'] == 'DUT': |
| _pkt = pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_CHILD_TABLE_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| else: |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: p.thread_diagnostic.tlv.type is nullField).\ |
| must_next() |
| |
| # Step 7: Leader to send DIAG_RST.req to DUT’s RLOC for the following diagnostic |
| # TLV type: |
| # TLV Type 9 - MAC Counters |
| # The DUT MUST respond with a CoAP response |
| # CoAP Response Code |
| # 2.04 Changed |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_RST_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_MAC_COUNTERS_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_RST_URI).\ |
| must_next() |
| |
| # Step 8: Leader to send DIAG_GET.req to DUT’s RLOC. |
| # The DUT MUST respond with a DIAG_GET.rsp response containing |
| # the requested diagnostic TLVs: |
| # CoAP Response Code |
| # 2.04 Changed |
| # CoAP Payload |
| # TLV Type 9 - MAC Counters |
| # TLV Type 9 - MAC Counters MUST contain a list of MAC Counters |
| # with 0 value or less than value returned in step 3. |
| pkts.filter_wpan_src64(LEADER).\ |
| filter_ipv6_dst(DUT_RLOC).\ |
| filter_coap_request(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_TYPE_LIST_TLV, |
| DG_MAC_COUNTERS_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| pkts.filter_wpan_src64(DUT).\ |
| filter_ipv6_dst(LEADER_RLOC).\ |
| filter_coap_ack(DIAG_GET_URI).\ |
| filter(lambda p: { |
| DG_MAC_COUNTERS_TLV |
| } == set(p.thread_diagnostic.tlv.type) |
| ).\ |
| must_next() |
| |
| |
| class Cert_5_7_01_CoapDiagCommands_Base_ROUTER(Cert_5_7_01_CoapDiagCommands_Base): |
| TOPOLOGY = copy.deepcopy(Cert_5_7_01_CoapDiagCommands_Base.TOPOLOGY) |
| TOPOLOGY[ROUTER1]['name'] = 'DUT' |
| TOPOLOGY[FED1]['name'] = 'FED' |
| |
| |
| class Cert_5_7_01_CoapDiagCommands_Base_FED(Cert_5_7_01_CoapDiagCommands_Base): |
| TOPOLOGY = copy.deepcopy(Cert_5_7_01_CoapDiagCommands_Base.TOPOLOGY) |
| TOPOLOGY[ROUTER1]['name'] = 'ROUTER' |
| TOPOLOGY[FED1]['name'] = 'DUT' |
| |
| |
| del (Cert_5_7_01_CoapDiagCommands_Base) |
| |
| if __name__ == '__main__': |
| unittest.main() |