Merge "QUalcomm H.264 encoder support."
diff --git a/nodes/pvomxencnode/src/pvmf_omx_enc_node.cpp b/nodes/pvomxencnode/src/pvmf_omx_enc_node.cpp
index 341677e..960714f 100644
--- a/nodes/pvomxencnode/src/pvmf_omx_enc_node.cpp
+++ b/nodes/pvomxencnode/src/pvmf_omx_enc_node.cpp
@@ -2539,7 +2539,7 @@
Mpeg4Type.nIDCVLCThreshold = 0;
Mpeg4Type.bACPred = OMX_TRUE;
Mpeg4Type.nMaxPacketSize = iVideoEncodeParam.iPacketSize;
- Mpeg4Type.nTimeIncRes = 1000; // (in relation to (should be higher than) frame rate )
+ Mpeg4Type.nTimeIncRes = 60; // (in relation to (should be higher than) frame rate )
Mpeg4Type.nHeaderExtension = 0;
Mpeg4Type.bReversibleVLC = ((iVideoEncodeParam.iRVLCEnable == true) ? OMX_TRUE : OMX_FALSE);
@@ -3010,8 +3010,8 @@
H264Type.bEnableFMO = OMX_FALSE;
H264Type.bEnableASO = OMX_FALSE;
H264Type.bEnableRS = OMX_FALSE;
- H264Type.eProfile = OMX_VIDEO_AVCProfileBaseline;
- H264Type.eLevel = OMX_VIDEO_AVCLevel1b;
+// H264Type.eProfile = OMX_VIDEO_AVCProfileBaseline;
+// H264Type.eLevel = OMX_VIDEO_AVCLevel1b;
H264Type.bFrameMBsOnly = OMX_TRUE;
H264Type.bMBAFF = OMX_FALSE;
H264Type.bEntropyCodingCABAC = OMX_FALSE;
@@ -3044,7 +3044,7 @@
//Set the parameters now
BitRateType.nPortIndex = iOutputPortIndex;
- BitRateType.eControlRate = static_cast<OMX_VIDEO_CONTROLRATETYPE>(iVideoEncodeParam.iRateControlType);
+ BitRateType.eControlRate = OMX_Video_ControlRateDisable; //static_cast<OMX_VIDEO_CONTROLRATETYPE>(iVideoEncodeParam.iRateControlType);
BitRateType.nTargetBitrate = iVideoEncodeParam.iBitRate[0];
Err = OMX_SetParameter(iOMXEncoder, OMX_IndexParamVideoBitrate, &BitRateType);
if (OMX_ErrorNone != Err)
@@ -4694,14 +4694,9 @@
ReportInfoEvent(PVMFInfoProcessingFailure, NULL);
}
- else if (aData1 == (OMX_U32) OMX_ErrorInvalidState)
- {
- PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::EventHandlerProcessing: OMX_EventError - OMX_ErrorInvalidState", iNodeTypeId));
- HandleComponentStateChange(OMX_StateInvalid);
- }
else
{
+
PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_ERR,
(0, "PVMFOMXEncNode-%s::EventHandlerProcessing: OMX_EventError", iNodeTypeId));
// for now, any error from the component will be reported as error
@@ -4961,46 +4956,6 @@
PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_ERR,
(0, "PVMFOMXEncNode-%s::HandleComponentStateChange: OMX_StateInvalid reached", iNodeTypeId));
- //Clearup encoder
- DeleteOMXEncoder();
-
- if (iCurrentCommand.size() > 0)
- {//can NOT be CANCEL or CANCEL_ALL. Just to cmd completion for the rest
- if (iCurrentCommand.front().iCmd == PVMFOMXEncNodeCommand::PVOMXENC_NODE_CMD_RESET)
- {
- //delete all ports and notify observer.
- if (iInPort)
- {
- OSCL_DELETE(((PVMFOMXEncPort*)iInPort));
- iInPort = NULL;
- }
-
- if (iOutPort)
- {
- OSCL_DELETE(((PVMFOMXEncPort*)iOutPort));
- iOutPort = NULL;
- }
-
- iDataIn.Unbind();
-
- // Reset the metadata key list
- iAvailableMetadataKeys.clear();
-
- iEndOfDataReached = false;
- iIsEOSSentToComponent = false;
- iIsEOSReceivedFromComponent = false;
-
- iProcessingState = EPVMFOMXEncNodeProcessingState_Idle;
- //logoff & go back to Created state.
- SetState(EPVMFNodeIdle);
- CommandComplete(iCurrentCommand, iCurrentCommand.front(), PVMFSuccess);
- }
- else
- {
- SetState(EPVMFNodeError);
- CommandComplete(iCurrentCommand, iCurrentCommand.front(), PVMFErrResource);
- }
- }
break;
}//end of case OMX_StateInvalid
@@ -5095,7 +5050,7 @@
// address of the mempool buffer (so that it can be released)
OsclAny *pContext = (OsclAny*) aBuffer->pAppPrivate;
-
+ uint32 nal_size= 0;
// check for EOS flag
if ((aBuffer->nFlags & OMX_BUFFERFLAG_EOS))
{
@@ -5114,7 +5069,7 @@
uint8* pData = (uint8*)aBuffer->pBuffer + aBuffer->nOffset;
uint8* pTemp;
uint32 size = aBuffer->nFilledLen;
- if (AVCAnnexBGetNALUnit(pData, &pTemp, (int32*)&size, true))
+ if (AVCAnnexBGetNALUnit(pData, &pTemp, (int32*)&size, false))
{
iFirstNALStartCodeSize = (uint32)pTemp - (uint32)pData;
}
@@ -5122,6 +5077,7 @@
{
iFirstNALStartCodeSize = 0;
}
+ nal_size = size;
}
/* the case in which a buffer simply containing a start code is sent */
@@ -5255,18 +5211,35 @@
if (aBuffer->nFilledLen <= (capacity - length))
{
iSPSs[iNumSPSs].ptr = destptr;
- iSPSs[iNumSPSs++].len = aBuffer->nFilledLen;
+ iSPSs[iNumSPSs++].len = nal_size;//aBuffer->nFilledLen;
- oscl_memcpy(destptr, pBufdata, aBuffer->nFilledLen); // copy SPS into iParamSet memfragment
- length += aBuffer->nFilledLen;
+ oscl_memcpy(destptr, pBufdata, nal_size); // copy SPS into iParamSet memfragment
+ length += nal_size;
iParamSet.getMemFrag().len = length; // update length
+ destptr += nal_size;
}
+ uint8* pData = (uint8*)aBuffer->pBuffer + nal_size +iFirstNALStartCodeSize;
+ uint32 size = aBuffer->nFilledLen -(nal_size +iFirstNALStartCodeSize) ;
+ AVCAnnexBGetNALUnit(pData, &bitstream, (int32*)&size, false) ;
+ nal_size = size;
+ nal_type = bitstream[0] & 0x1F;
+ if (nal_type == 0x08) // PPS type NAL
+ {
+ if (aBuffer->nFilledLen <= (capacity - length))
+ {
+ iPPSs[iNumPPSs].ptr = destptr;
+ iPPSs[iNumPPSs++].len = nal_size;//aBuffer->nFilledLen;
+ oscl_memcpy(destptr, bitstream, nal_size); // copy PPS into iParamSet memfragment
+ length += nal_size;//aBuffer->nFilledLen;
+ iParamSet.getMemFrag().len = length; // update length
+ }
// release the OMX buffer
iOutBufMemoryPool->deallocate(pContext);
return OMX_ErrorNone;
}
+ }
else if (nal_type == 0x08) // PPS type NAL
{
@@ -5675,6 +5648,7 @@
{
// skip start code
pData += iFirstNALStartCodeSize;
+ aDataLen -= iFirstNALStartCodeSize;
}
memFrag.ptr = pData;
@@ -5889,7 +5863,7 @@
{
// try to create component
err = OMX_MasterGetHandle(&iOMXEncoder, (OMX_STRING) CompOfRole[ii], (OMX_PTR) this, (OMX_CALLBACKTYPE *) & iCallbacks);
-
+ // if successful, no need to continue
if ((err == OMX_ErrorNone) && (iOMXEncoder != NULL))
{
oscl_strncpy((OMX_STRING)CompName, (OMX_STRING) CompOfRole[ii], PV_OMX_MAX_COMPONENT_NAME_LENGTH);
@@ -5898,22 +5872,16 @@
(0, "PVMFOMXEncNode-%s::DoPrepare(): Got Component %s handle ", iNodeTypeId, CompOfRole[ii]));
LOGE("PVMFOMXEncNode-%s::DoPrepare(): Got Component %s handle ", iNodeTypeId, CompOfRole[ii]);
- if ((CheckComponentForMultRoles((OMX_STRING)CompName, (OMX_STRING)CompOfRole[ii])) &&
- (CheckComponentCapabilities(&iOutFormat)))
- {
- // Found a component and it passed all tests. Break out of the loop
- break;
- }
+ break;
}
-
- // Component failed negotiations
- if (iOMXEncoder != NULL)
+ else
{
- OMX_MasterFreeHandle(iOMXEncoder);
- iOMXEncoder = NULL;
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_DEBUG,
+ (0, "PVMFOMXEncNode-%s::DoPrepare(): Cannot get component %s handle, try another component if available", iNodeTypeId, CompOfRole[ii]));
+ LOGE("PVMFOMXEncNode-%s::DoPrepare(): Cannot get component %s handle, try another component if available", iNodeTypeId, CompOfRole[ii]);
}
- }
+ }
// whether successful or not, need to free CompOfRoles
for (ii = 0; ii < num_comps; ii++)
{
@@ -5941,12 +5909,123 @@
return;
}
+
+
if (!iOMXEncoder)
{
CommandComplete(iInputCommands, aCmd, PVMFErrNoResources);
return;
}
+
+ // find out how many roles the component supports
+ OMX_U32 NumRoles;
+ err = OMX_MasterGetRolesOfComponent((OMX_STRING)CompName, &NumRoles, NULL);
+ if (err != OMX_ErrorNone)
+ {
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
+ (0, "PVMFOMXEncNode-%s::DoPrepare() Problem getting component roles", iNodeTypeId));
+
+ CommandComplete(iInputCommands, aCmd, PVMFErrResource);
+ return;
+ }
+
+ // if the component supports multiple roles, call OMX_SetParameter
+ if (NumRoles > 1)
+ {
+ OMX_PARAM_COMPONENTROLETYPE RoleParam;
+ CONFIG_SIZE_AND_VERSION(RoleParam);
+ oscl_strncpy((OMX_STRING)RoleParam.cRole, (OMX_STRING)Role, OMX_MAX_STRINGNAME_SIZE);
+ err = OMX_SetParameter(iOMXEncoder, OMX_IndexParamStandardComponentRole, &RoleParam);
+ if (err != OMX_ErrorNone)
+ {
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
+ (0, "PVMFOMXEncNode-%s::DoPrepare() Problem setting component role", iNodeTypeId));
+
+ CommandComplete(iInputCommands, aCmd, PVMFErrResource);
+ return;
+ }
+ }
+
+
+ // GET CAPABILITY FLAGS FROM PV COMPONENT, IF this fails, use defaults
+ PV_OMXComponentCapabilityFlagsType Cap_flags;
+ err = OMX_GetParameter(iOMXEncoder, (OMX_INDEXTYPE) PV_OMX_COMPONENT_CAPABILITY_TYPE_INDEX, &Cap_flags);
+ if (err != OMX_ErrorNone)
+ {
+ SetDefaultCapabilityFlags();
+ }
+ else
+ {
+ iIsOMXComponentMultiThreaded = (OMX_TRUE == Cap_flags.iIsOMXComponentMultiThreaded) ? true : false;
+ iOMXComponentSupportsExternalInputBufferAlloc = (OMX_TRUE == Cap_flags.iOMXComponentSupportsExternalInputBufferAlloc) ? true : false;
+ iOMXComponentSupportsExternalOutputBufferAlloc = (OMX_TRUE == Cap_flags.iOMXComponentSupportsExternalOutputBufferAlloc) ? true : false;
+ iOMXComponentSupportsMovableInputBuffers = (OMX_TRUE == Cap_flags.iOMXComponentSupportsMovableInputBuffers) ? true : false;
+ iOMXComponentSupportsPartialFrames = (OMX_TRUE == Cap_flags.iOMXComponentSupportsPartialFrames) ? true : false;
+ iOMXComponentUsesNALStartCodes = (OMX_TRUE == Cap_flags.iOMXComponentUsesNALStartCodes) ? true : false;
+ iOMXComponentCanHandleIncompleteFrames = (OMX_TRUE == Cap_flags.iOMXComponentCanHandleIncompleteFrames) ? true : false;
+ iOMXComponentUsesFullAVCFrames = (OMX_TRUE == Cap_flags.iOMXComponentUsesFullAVCFrames) ? true : false;
+ }
+
+ /* iOMXComponentUsesNALStartCodes: The component inserts start codes before NALs
+
+ iOMXComponentUsesFullAVCFrames
+ && !iOMXComponentUsesNALStartCodes: The component outputs full frames, and stores NAL start codes using the
+ OMX ExtraData structure in the output buffer
+ iOMXComponentUsesFullAVCFrames
+ && iOMXComponentUsesNALStartCodes: The component outputs full frames, and delimits NALs by their start codes
+
+ iOutFormat == PVMF_MIME_H264_VIDEO_RAW
+ && !iOMXComponentUsesNALStartCodes: The node inserts the start codes and hides them / exposes them when needed
+
+ iOutFormat == PVMF_MIME_H264_VIDEO_RAW
+ && !iOMXComponentUsesNALStartCodes
+ && iOMXComponentUsesFullAVCFrames: This is an invalid combination. If the node wants raw output, and the component
+ uses full frames, and no start codes, then there is no way to detect the
+ NAL boundaries.
+
+ */
+
+ if (iOutFormat == PVMF_MIME_H264_VIDEO_RAW &&
+ iOMXComponentUsesFullAVCFrames && !iOMXComponentUsesNALStartCodes)
+ {
+ // This is an invalid combination (see above). Therefore, return an error.
+
+
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
+ (0, "PVMFOMXEncNode-%s::DoPrepare() Component cannot support %s format", iNodeTypeId, PVMF_MIME_H264_VIDEO_RAW));
+
+ CommandComplete(iInputCommands, aCmd, PVMFErrNotSupported);
+ return;
+ }
+
+
+ // find out about parameters
+ if ((iOutFormat == PVMF_MIME_AMR_IETF) || (iOutFormat == PVMF_MIME_AMRWB_IETF) || (iOutFormat == PVMF_MIME_AMR_IF2) ||
+ (iOutFormat == PVMF_MIME_ADIF) || (iOutFormat == PVMF_MIME_ADTS) || (iOutFormat == PVMF_MIME_MPEG4_AUDIO))
+ {
+ if (!NegotiateAudioComponentParameters())
+ {
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
+ (0, "PVMFOMXEncNode-%s::DoPrepare() Cannot get component parameters", iNodeTypeId));
+
+ CommandComplete(iInputCommands, aCmd, PVMFErrNoResources);
+ return;
+ }
+ }
+ else
+ {
+
+ if (!NegotiateVideoComponentParameters())
+ {
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
+ (0, "PVMFOMXEncNode-%s::DoPrepare() Cannot get component parameters", iNodeTypeId));
+
+ CommandComplete(iInputCommands, aCmd, PVMFErrNoResources);
+ return;
+ }
+ }
+
// create active objects to handle callbacks in case of multithreaded implementation
// NOTE: CREATE THE THREADSAFE CALLBACK AOs REGARDLESS OF WHETHER MULTITHREADED COMPONENT OR NOT
@@ -6533,7 +6612,26 @@
err = OMX_GetState(iOMXEncoder, &sState);
if (err != OMX_ErrorNone)
{
- sState = OMX_StateInvalid;
+ //Error condition report
+ PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
+ (0, "PVMFOMXEncNode-%s::DoReset(): Can't get State of encoder!", iNodeTypeId));
+ if (iResetInProgress)
+ {
+ // cmd is in current q
+ iResetInProgress = false;
+ if ((iCurrentCommand.size() > 0) &&
+ (iCurrentCommand.front().iCmd == PVMFOMXEncNodeCommand::PVOMXENC_NODE_CMD_RESET)
+ )
+ {
+ CommandComplete(iCurrentCommand, iCurrentCommand.front(), PVMFErrResource);
+ }
+
+ }
+ else
+ {
+ CommandComplete(iInputCommands, aCmd, PVMFErrResource);
+ }
+ return;
}
if (sState == OMX_StateLoaded)
@@ -6547,9 +6645,47 @@
(0, "PVMFOMXEncNode-%s::DoReset() OMX comp is in loaded state. Wait for official callback to change variables etc.", iNodeTypeId));
return;
}
+ else
+ {
+ //delete all ports and notify observer.
+ if (iInPort)
+ {
+ OSCL_DELETE(((PVMFOMXEncPort*)iInPort));
+ iInPort = NULL;
+ }
+
+ if (iOutPort)
+ {
+ OSCL_DELETE(((PVMFOMXEncPort*)iOutPort));
+ iOutPort = NULL;
+ }
+
+ iDataIn.Unbind();
+
+
+ // Reset the metadata key list
+ iAvailableMetadataKeys.clear();
+
+ iEndOfDataReached = false;
+ iIsEOSSentToComponent = false;
+ iIsEOSReceivedFromComponent = false;
+
+
+ iProcessingState = EPVMFOMXEncNodeProcessingState_Idle;
+ //logoff & go back to Created state.
+ SetState(EPVMFNodeIdle);
+
+ CommandComplete(iInputCommands, aCmd, PVMFSuccess);
+
+ //CommandComplete(iInputCommands, aCmd, PVMFErrResource);
+ return;
+ }
}
- else if (sState == OMX_StateIdle)
+
+ if (sState == OMX_StateIdle)
{
+
+
//this command is asynchronous. move the command from
//the input command queue to the current command, where
//it will remain until it is completed.
@@ -6670,7 +6806,7 @@
return;
}
- else if ((sState == OMX_StateExecuting) || (sState == OMX_StatePause))
+ if ((sState == OMX_StateExecuting) || (sState == OMX_StatePause))
{
//this command is asynchronous. move the command from
//the input command queue to the current command, where
@@ -6747,16 +6883,29 @@
iProcessingState = EPVMFOMXEncNodeProcessingState_Stopping;
}
return;
+
}
else
{
//Error condition report
PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::DoReset(): Encoder is not in the Idle state! %d", iNodeTypeId, sState ));
- //do it here rather than relying on DTOR to avoid node reinit problems.
- DeleteOMXEncoder();
- //still return success.
- }//end of if (sState == OMX_StateLoaded)
+ (0, "PVMFOMXEncNode-%s::DoReset(): Encoder is not in the Idle state!", iNodeTypeId));
+ if (iResetInProgress)
+ {
+ iResetInProgress = false;
+ if ((iCurrentCommand.size() > 0) &&
+ (iCurrentCommand.front().iCmd == PVMFOMXEncNodeCommand::PVOMXENC_NODE_CMD_RESET)
+ )
+ {
+ CommandComplete(iCurrentCommand, iCurrentCommand.front(), PVMFErrInvalidState);
+ }
+ }
+ else
+ {
+ CommandComplete(iInputCommands, aCmd, PVMFErrInvalidState);
+ }
+ break;
+ }//end of if (sState == OMX_StateIdle)
}//end of if (iOMXEncoder != NULL)
//delete all ports and notify observer.
@@ -10039,121 +10188,3 @@
return (uint32) current_ts;
}
-
-////////////////////////////////////////////////////////////////////////////////
-bool PVMFOMXEncNode::CheckComponentForMultRoles(OMX_STRING aCompName, OMX_STRING aRole)
-{
- OMX_ERRORTYPE err = OMX_ErrorNone;
-
- // find out how many roles the component supports
- OMX_U32 NumRoles;
- err = OMX_MasterGetRolesOfComponent(aCompName, &NumRoles, NULL);
- if (err != OMX_ErrorNone)
- {
- PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::CheckComponentForMultRoles() Problem getting component roles", iNodeTypeId));
-
- return false;
- }
-
- // if the component supports multiple roles, call OMX_SetParameter
- if (NumRoles > 1)
- {
- OMX_PARAM_COMPONENTROLETYPE RoleParam;
- CONFIG_SIZE_AND_VERSION(RoleParam);
- oscl_strncpy((OMX_STRING)RoleParam.cRole, aRole, OMX_MAX_STRINGNAME_SIZE);
- err = OMX_SetParameter(iOMXEncoder, OMX_IndexParamStandardComponentRole, &RoleParam);
- if (err != OMX_ErrorNone)
- {
- PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::CheckComponentForMultRoles() Problem setting component role", iNodeTypeId));
-
- return false;
- }
- }
-
- return true;
-}
-
-////////////////////////////////////////////////////////////////////////////////
-bool PVMFOMXEncNode::CheckComponentCapabilities(PVMFFormatType* aOutFormat)
-{
- OMX_ERRORTYPE err = OMX_ErrorNone;
-
- // GET CAPABILITY FLAGS FROM PV COMPONENT, IF this fails, use defaults
- PV_OMXComponentCapabilityFlagsType Cap_flags;
- err = OMX_GetParameter(iOMXEncoder, (OMX_INDEXTYPE) PV_OMX_COMPONENT_CAPABILITY_TYPE_INDEX, &Cap_flags);
- if (err != OMX_ErrorNone)
- {
- SetDefaultCapabilityFlags();
- }
- else
- {
- iIsOMXComponentMultiThreaded = (OMX_TRUE == Cap_flags.iIsOMXComponentMultiThreaded) ? true : false;
- iOMXComponentSupportsExternalInputBufferAlloc = (OMX_TRUE == Cap_flags.iOMXComponentSupportsExternalInputBufferAlloc) ? true : false;
- iOMXComponentSupportsExternalOutputBufferAlloc = (OMX_TRUE == Cap_flags.iOMXComponentSupportsExternalOutputBufferAlloc) ? true : false;
- iOMXComponentSupportsMovableInputBuffers = (OMX_TRUE == Cap_flags.iOMXComponentSupportsMovableInputBuffers) ? true : false;
- iOMXComponentSupportsPartialFrames = (OMX_TRUE == Cap_flags.iOMXComponentSupportsPartialFrames) ? true : false;
- iOMXComponentUsesNALStartCodes = (OMX_TRUE == Cap_flags.iOMXComponentUsesNALStartCodes) ? true : false;
- iOMXComponentCanHandleIncompleteFrames = (OMX_TRUE == Cap_flags.iOMXComponentCanHandleIncompleteFrames) ? true : false;
- iOMXComponentUsesFullAVCFrames = (OMX_TRUE == Cap_flags.iOMXComponentUsesFullAVCFrames) ? true : false;
- }
-
- /* iOMXComponentUsesNALStartCodes: The component inserts start codes before NALs
-
- iOMXComponentUsesFullAVCFrames
- && !iOMXComponentUsesNALStartCodes: The component outputs full frames, and stores NAL start codes using the
- OMX ExtraData structure in the output buffer
-
- iOMXComponentUsesFullAVCFrames
- && iOMXComponentUsesNALStartCodes: The component outputs full frames, and delimits NALs by their start codes
-
- aOutFormat == PVMF_MIME_H264_VIDEO_RAW
- && !iOMXComponentUsesNALStartCodes: The node inserts the start codes and hides them / exposes them when needed
-
- aOutFormat == PVMF_MIME_H264_VIDEO_RAW
- && !iOMXComponentUsesNALStartCodes
- && iOMXComponentUsesFullAVCFrames: This is an invalid combination. If the node wants raw output, and the component
- uses full frames, and no start codes, then there is no way to detect the
- NAL boundaries.
- */
-
- if (*aOutFormat == PVMF_MIME_H264_VIDEO_RAW &&
- iOMXComponentUsesFullAVCFrames && !iOMXComponentUsesNALStartCodes)
- {
- // This is an invalid combination (see above). Therefore, return an error.
-
-
- PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::CheckComponentCapabilities() Component cannot support %s format", iNodeTypeId, PVMF_MIME_H264_VIDEO_RAW));
-
- return false;
- }
-
- // find out about parameters
- if (aOutFormat->isAudio())
- {
- if (!NegotiateAudioComponentParameters())
- {
- PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::CheckComponentCapabilities() Cannot get component parameters", iNodeTypeId));
-
- return false;
- }
- }
- else
- {
-
- if (!NegotiateVideoComponentParameters())
- {
- PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger, PVLOGMSG_ERR,
- (0, "PVMFOMXEncNode-%s::CheckComponentCapabilities() Cannot get component parameters", iNodeTypeId));
-
- return false;
- }
- }
-
- return true;
-}
-
-