blob: e7c4b790da5427393783405f6da6271b120efd64 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 Copyright (c) 2002,2003 Alexander Malysh <amalysh@web.de>
3
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
8
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
13
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17*/
18
19/*
20 Changes:
21 24.08.2002
22 Fixed the typo in sis630_access (Thanks to Mark M. Hoffman)
23 Changed sis630_transaction.(Thanks to Mark M. Hoffman)
24 18.09.2002
25 Added SIS730 as supported.
26 21.09.2002
27 Added high_clock module option.If this option is set
28 used Host Master Clock 56KHz (default 14KHz).For now we save old Host
29 Master Clock and after transaction completed restore (otherwise
30 it's confuse BIOS and hung Machine).
31 24.09.2002
32 Fixed typo in sis630_access
33 Fixed logical error by restoring of Host Master Clock
34 31.07.2003
35 Added block data read/write support.
36*/
37
38/*
39 Status: beta
40
41 Supports:
42 SIS 630
43 SIS 730
44
45 Note: we assume there can only be one device, with one SMBus interface.
46*/
47
Linus Torvalds1da177e2005-04-16 15:20:36 -070048#include <linux/kernel.h>
49#include <linux/module.h>
50#include <linux/delay.h>
51#include <linux/pci.h>
52#include <linux/ioport.h>
53#include <linux/init.h>
54#include <linux/i2c.h>
Jean Delvare54fb4a052008-07-14 22:38:33 +020055#include <linux/acpi.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070056#include <asm/io.h>
57
58/* SIS630 SMBus registers */
59#define SMB_STS 0x80 /* status */
60#define SMB_EN 0x81 /* status enable */
61#define SMB_CNT 0x82
62#define SMBHOST_CNT 0x83
63#define SMB_ADDR 0x84
64#define SMB_CMD 0x85
65#define SMB_PCOUNT 0x86 /* processed count */
66#define SMB_COUNT 0x87
67#define SMB_BYTE 0x88 /* ~0x8F data byte field */
68#define SMBDEV_ADDR 0x90
69#define SMB_DB0 0x91
70#define SMB_DB1 0x92
71#define SMB_SAA 0x93
72
73/* register count for request_region */
74#define SIS630_SMB_IOREGION 20
75
76/* PCI address constants */
77/* acpi base address register */
78#define SIS630_ACPI_BASE_REG 0x74
79/* bios control register */
80#define SIS630_BIOS_CTL_REG 0x40
81
82/* Other settings */
83#define MAX_TIMEOUT 500
84
85/* SIS630 constants */
86#define SIS630_QUICK 0x00
87#define SIS630_BYTE 0x01
88#define SIS630_BYTE_DATA 0x02
89#define SIS630_WORD_DATA 0x03
90#define SIS630_PCALL 0x04
91#define SIS630_BLOCK_DATA 0x05
92
Jean Delvared6072f82005-09-25 16:37:04 +020093static struct pci_driver sis630_driver;
94
Linus Torvalds1da177e2005-04-16 15:20:36 -070095/* insmod parameters */
96static int high_clock;
97static int force;
98module_param(high_clock, bool, 0);
99MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz).");
100module_param(force, bool, 0);
101MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
102
103/* acpi base address */
Jean Delvare60507092005-09-25 16:23:07 +0200104static unsigned short acpi_base;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105
106/* supported chips */
107static int supported[] = {
108 PCI_DEVICE_ID_SI_630,
109 PCI_DEVICE_ID_SI_730,
110 0 /* terminates the list */
111};
112
113static inline u8 sis630_read(u8 reg)
114{
115 return inb(acpi_base + reg);
116}
117
118static inline void sis630_write(u8 reg, u8 data)
119{
120 outb(data, acpi_base + reg);
121}
122
123static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock)
124{
125 int temp;
126
127 /* Make sure the SMBus host is ready to start transmitting. */
128 if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
129 dev_dbg(&adap->dev, "SMBus busy (%02x).Resetting...\n",temp);
130 /* kill smbus transaction */
131 sis630_write(SMBHOST_CNT, 0x20);
132
133 if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
134 dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
David Brownell97140342008-07-14 22:38:25 +0200135 return -EBUSY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136 } else {
Jean Delvarec5d21b72008-04-29 23:11:37 +0200137 dev_dbg(&adap->dev, "Successful!\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138 }
139 }
140
141 /* save old clock, so we can prevent machine for hung */
142 *oldclock = sis630_read(SMB_CNT);
143
144 dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock);
145
146 /* disable timeout interrupt , set Host Master Clock to 56KHz if requested */
147 if (high_clock)
148 sis630_write(SMB_CNT, 0x20);
149 else
150 sis630_write(SMB_CNT, (*oldclock & ~0x40));
151
152 /* clear all sticky bits */
153 temp = sis630_read(SMB_STS);
154 sis630_write(SMB_STS, temp & 0x1e);
155
156 /* start the transaction by setting bit 4 and size */
157 sis630_write(SMBHOST_CNT,0x10 | (size & 0x07));
158
159 return 0;
160}
161
162static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
163{
164 int temp, result = 0, timeout = 0;
165
166 /* We will always wait for a fraction of a second! */
167 do {
168 msleep(1);
169 temp = sis630_read(SMB_STS);
170 /* check if block transmitted */
171 if (size == SIS630_BLOCK_DATA && (temp & 0x10))
172 break;
173 } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
174
175 /* If the SMBus is still busy, we give up */
176 if (timeout >= MAX_TIMEOUT) {
177 dev_dbg(&adap->dev, "SMBus Timeout!\n");
David Brownell97140342008-07-14 22:38:25 +0200178 result = -ETIMEDOUT;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179 }
180
181 if (temp & 0x02) {
182 dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
David Brownell97140342008-07-14 22:38:25 +0200183 result = -ENXIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700184 }
185
186 if (temp & 0x04) {
187 dev_err(&adap->dev, "Bus collision!\n");
David Brownell97140342008-07-14 22:38:25 +0200188 result = -EIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189 /*
190 TBD: Datasheet say:
191 the software should clear this bit and restart SMBUS operation.
192 Should we do it or user start request again?
193 */
194 }
195
196 return result;
197}
198
199static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
200{
201 int temp = 0;
202
203 /* clear all status "sticky" bits */
204 sis630_write(SMB_STS, temp);
205
206 dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT));
207
208 /*
209 * restore old Host Master Clock if high_clock is set
210 * and oldclock was not 56KHz
211 */
212 if (high_clock && !(oldclock & 0x20))
213 sis630_write(SMB_CNT,(sis630_read(SMB_CNT) & ~0x20));
214
215 dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
216}
217
218static int sis630_transaction(struct i2c_adapter *adap, int size)
219{
220 int result = 0;
221 u8 oldclock = 0;
222
223 result = sis630_transaction_start(adap, size, &oldclock);
224 if (!result) {
225 result = sis630_transaction_wait(adap, size);
226 sis630_transaction_end(adap, oldclock);
227 }
228
229 return result;
230}
231
232static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write)
233{
234 int i, len = 0, rc = 0;
235 u8 oldclock = 0;
236
237 if (read_write == I2C_SMBUS_WRITE) {
238 len = data->block[0];
239 if (len < 0)
240 len = 0;
241 else if (len > 32)
242 len = 32;
243 sis630_write(SMB_COUNT, len);
244 for (i=1; i <= len; i++) {
245 dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]);
246 /* set data */
247 sis630_write(SMB_BYTE+(i-1)%8, data->block[i]);
248 if (i==8 || (len<8 && i==len)) {
249 dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i);
250 /* first transaction */
David Brownell97140342008-07-14 22:38:25 +0200251 rc = sis630_transaction_start(adap,
252 SIS630_BLOCK_DATA, &oldclock);
253 if (rc)
254 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255 }
256 else if ((i-1)%8 == 7 || i==len) {
257 dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i);
258 if (i>8) {
259 dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
260 /*
261 If this is not first transaction,
262 we must clear sticky bit.
263 clear SMBARY_STS
264 */
265 sis630_write(SMB_STS,0x10);
266 }
David Brownell97140342008-07-14 22:38:25 +0200267 rc = sis630_transaction_wait(adap,
268 SIS630_BLOCK_DATA);
269 if (rc) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270 dev_dbg(&adap->dev, "trans_wait failed\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700271 break;
272 }
273 }
274 }
275 }
276 else {
277 /* read request */
278 data->block[0] = len = 0;
David Brownell97140342008-07-14 22:38:25 +0200279 rc = sis630_transaction_start(adap,
280 SIS630_BLOCK_DATA, &oldclock);
281 if (rc)
282 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283 do {
David Brownell97140342008-07-14 22:38:25 +0200284 rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA);
285 if (rc) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286 dev_dbg(&adap->dev, "trans_wait failed\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 break;
288 }
289 /* if this first transaction then read byte count */
290 if (len == 0)
291 data->block[0] = sis630_read(SMB_COUNT);
292
293 /* just to be sure */
294 if (data->block[0] > 32)
295 data->block[0] = 32;
296
297 dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]);
298
299 for (i=0; i < 8 && len < data->block[0]; i++,len++) {
300 dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len);
301 data->block[len+1] = sis630_read(SMB_BYTE+i);
302 }
303
304 dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
305
306 /* clear SMBARY_STS */
307 sis630_write(SMB_STS,0x10);
308 } while(len < data->block[0]);
309 }
310
311 sis630_transaction_end(adap, oldclock);
312
313 return rc;
314}
315
David Brownell97140342008-07-14 22:38:25 +0200316/* Return negative errno on error. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
318 unsigned short flags, char read_write,
319 u8 command, int size, union i2c_smbus_data *data)
320{
David Brownell97140342008-07-14 22:38:25 +0200321 int status;
322
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323 switch (size) {
324 case I2C_SMBUS_QUICK:
325 sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
326 size = SIS630_QUICK;
327 break;
328 case I2C_SMBUS_BYTE:
329 sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
330 if (read_write == I2C_SMBUS_WRITE)
331 sis630_write(SMB_CMD, command);
332 size = SIS630_BYTE;
333 break;
334 case I2C_SMBUS_BYTE_DATA:
335 sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
336 sis630_write(SMB_CMD, command);
337 if (read_write == I2C_SMBUS_WRITE)
338 sis630_write(SMB_BYTE, data->byte);
339 size = SIS630_BYTE_DATA;
340 break;
341 case I2C_SMBUS_PROC_CALL:
342 case I2C_SMBUS_WORD_DATA:
343 sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01));
344 sis630_write(SMB_CMD, command);
345 if (read_write == I2C_SMBUS_WRITE) {
346 sis630_write(SMB_BYTE, data->word & 0xff);
347 sis630_write(SMB_BYTE + 1,(data->word & 0xff00) >> 8);
348 }
349 size = (size == I2C_SMBUS_PROC_CALL ? SIS630_PCALL : SIS630_WORD_DATA);
350 break;
351 case I2C_SMBUS_BLOCK_DATA:
352 sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01));
353 sis630_write(SMB_CMD, command);
354 size = SIS630_BLOCK_DATA;
355 return sis630_block_data(adap, data, read_write);
356 default:
Jean Delvareac7fc4f2008-07-14 22:38:25 +0200357 dev_warn(&adap->dev, "Unsupported transaction %d\n",
358 size);
David Brownell97140342008-07-14 22:38:25 +0200359 return -EOPNOTSUPP;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360 }
361
David Brownell97140342008-07-14 22:38:25 +0200362 status = sis630_transaction(adap, size);
363 if (status)
364 return status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365
366 if ((size != SIS630_PCALL) &&
367 ((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) {
368 return 0;
369 }
370
371 switch(size) {
372 case SIS630_BYTE:
373 case SIS630_BYTE_DATA:
374 data->byte = sis630_read(SMB_BYTE);
375 break;
376 case SIS630_PCALL:
377 case SIS630_WORD_DATA:
378 data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8);
379 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700380 }
381
382 return 0;
383}
384
385static u32 sis630_func(struct i2c_adapter *adapter)
386{
387 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
388 I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL |
389 I2C_FUNC_SMBUS_BLOCK_DATA;
390}
391
392static int sis630_setup(struct pci_dev *sis630_dev)
393{
394 unsigned char b;
395 struct pci_dev *dummy = NULL;
396 int retval = -ENODEV, i;
397
398 /* check for supported SiS devices */
399 for (i=0; supported[i] > 0 ; i++) {
400 if ((dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy)))
401 break; /* found */
402 }
403
404 if (dummy) {
405 pci_dev_put(dummy);
406 }
407 else if (force) {
408 dev_err(&sis630_dev->dev, "WARNING: Can't detect SIS630 compatible device, but "
409 "loading because of force option enabled\n");
410 }
411 else {
412 return -ENODEV;
413 }
414
415 /*
416 Enable ACPI first , so we can accsess reg 74-75
417 in acpi io space and read acpi base addr
418 */
419 if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) {
420 dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n");
421 goto exit;
422 }
423 /* if ACPI already enabled , do nothing */
424 if (!(b & 0x80) &&
425 pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) {
426 dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n");
427 goto exit;
428 }
429
430 /* Determine the ACPI base address */
431 if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) {
432 dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n");
433 goto exit;
434 }
435
436 dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
437
Jean Delvare54fb4a052008-07-14 22:38:33 +0200438 retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
439 sis630_driver.name);
440 if (retval)
441 goto exit;
442
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443 /* Everything is happy, let's grab the memory and set things up. */
Jean Delvared6072f82005-09-25 16:37:04 +0200444 if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
445 sis630_driver.name)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700446 dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
447 "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
448 goto exit;
449 }
450
451 retval = 0;
452
453exit:
454 if (retval)
455 acpi_base = 0;
456 return retval;
457}
458
459
Jean Delvare8f9082c2006-09-03 22:39:46 +0200460static const struct i2c_algorithm smbus_algorithm = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700461 .smbus_xfer = sis630_access,
462 .functionality = sis630_func,
463};
464
465static struct i2c_adapter sis630_adapter = {
466 .owner = THIS_MODULE,
Stephen Hemminger9ace5552007-02-13 22:09:01 +0100467 .id = I2C_HW_SMBUS_SIS630,
Jean Delvare3401b2f2008-07-14 22:38:29 +0200468 .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469 .algo = &smbus_algorithm,
470};
471
472static struct pci_device_id sis630_ids[] __devinitdata = {
473 { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
474 { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) },
475 { 0, }
476};
477
478MODULE_DEVICE_TABLE (pci, sis630_ids);
479
480static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
481{
482 if (sis630_setup(dev)) {
483 dev_err(&dev->dev, "SIS630 comp. bus not detected, module not inserted.\n");
484 return -ENODEV;
485 }
486
Robert P. J. Day405ae7d2007-02-17 19:13:42 +0100487 /* set up the sysfs linkage to our parent device */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700488 sis630_adapter.dev.parent = &dev->dev;
489
490 sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x",
491 acpi_base + SMB_STS);
492
493 return i2c_add_adapter(&sis630_adapter);
494}
495
496static void __devexit sis630_remove(struct pci_dev *dev)
497{
498 if (acpi_base) {
499 i2c_del_adapter(&sis630_adapter);
500 release_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION);
501 acpi_base = 0;
502 }
503}
504
505
506static struct pci_driver sis630_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 .name = "sis630_smbus",
508 .id_table = sis630_ids,
509 .probe = sis630_probe,
510 .remove = __devexit_p(sis630_remove),
511};
512
513static int __init i2c_sis630_init(void)
514{
515 return pci_register_driver(&sis630_driver);
516}
517
518
519static void __exit i2c_sis630_exit(void)
520{
521 pci_unregister_driver(&sis630_driver);
522}
523
524
525MODULE_LICENSE("GPL");
526MODULE_AUTHOR("Alexander Malysh <amalysh@web.de>");
527MODULE_DESCRIPTION("SIS630 SMBus driver");
528
529module_init(i2c_sis630_init);
530module_exit(i2c_sis630_exit);