blob: c5b30f06218a3af833c3dd9724f8871f19048d17 [file] [log] [blame]
Samu Onkalo0efba162010-11-11 14:05:22 -08001/*
Daniel Mack9ef8c872014-05-05 04:46:54 -07002 * lp5523.c - LP5523, LP55231 LED Driver
Samu Onkalo0efba162010-11-11 14:05:22 -08003 *
4 * Copyright (C) 2010 Nokia Corporation
Milo(Woogyom) Kima2387cb2013-02-05 19:28:00 +09005 * Copyright (C) 2012 Texas Instruments
Samu Onkalo0efba162010-11-11 14:05:22 -08006 *
7 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
Milo(Woogyom) Kima2387cb2013-02-05 19:28:00 +09008 * Milo(Woogyom) Kim <milo.kim@ti.com>
Samu Onkalo0efba162010-11-11 14:05:22 -08009 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
13 *
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22 * 02110-1301 USA
23 */
24
Samu Onkalo0efba162010-11-11 14:05:22 -080025#include <linux/delay.h>
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +090026#include <linux/firmware.h>
Milo(Woogyom) Kim79bcc102013-02-05 19:26:14 +090027#include <linux/i2c.h>
Milo(Woogyom) Kim79bcc102013-02-05 19:26:14 +090028#include <linux/leds.h>
29#include <linux/module.h>
30#include <linux/mutex.h>
Sachin Kamatc68f46d2013-09-28 04:38:30 -070031#include <linux/of.h>
Milo(Woogyom) Kim79bcc102013-02-05 19:26:14 +090032#include <linux/platform_data/leds-lp55xx.h>
33#include <linux/slab.h>
Milo(Woogyom) Kim6a0c9a42013-02-05 18:03:08 +090034
35#include "leds-lp55xx-common.h"
Samu Onkalo0efba162010-11-11 14:05:22 -080036
Pavel Machekbfb18d82014-01-10 00:14:05 +010037#define LP5523_PROGRAM_LENGTH 32 /* bytes */
38/* Memory is used like this:
39 0x00 engine 1 program
40 0x10 engine 2 program
41 0x20 engine 3 program
42 0x30 engine 1 muxing info
43 0x40 engine 2 muxing info
44 0x50 engine 3 muxing info
45*/
Milo(Woogyom) Kim12f022d2013-02-05 19:25:26 +090046#define LP5523_MAX_LEDS 9
47
48/* Registers */
Samu Onkalo0efba162010-11-11 14:05:22 -080049#define LP5523_REG_ENABLE 0x00
50#define LP5523_REG_OP_MODE 0x01
Samu Onkalo0efba162010-11-11 14:05:22 -080051#define LP5523_REG_ENABLE_LEDS_MSB 0x04
52#define LP5523_REG_ENABLE_LEDS_LSB 0x05
Toshi Kikuchi52da81e2015-05-11 12:10:54 -070053#define LP5523_REG_LED_CTRL_BASE 0x06
Samu Onkalo0efba162010-11-11 14:05:22 -080054#define LP5523_REG_LED_PWM_BASE 0x16
55#define LP5523_REG_LED_CURRENT_BASE 0x26
56#define LP5523_REG_CONFIG 0x36
Milo(Woogyom) Kim12f022d2013-02-05 19:25:26 +090057#define LP5523_REG_STATUS 0x3A
58#define LP5523_REG_RESET 0x3D
Samu Onkalo0efba162010-11-11 14:05:22 -080059#define LP5523_REG_LED_TEST_CTRL 0x41
60#define LP5523_REG_LED_TEST_ADC 0x42
Toshi Kikuchi52da81e2015-05-11 12:10:54 -070061#define LP5523_REG_MASTER_FADER_BASE 0x48
Milo Kim22460432013-08-08 13:57:35 +090062#define LP5523_REG_CH1_PROG_START 0x4C
63#define LP5523_REG_CH2_PROG_START 0x4D
64#define LP5523_REG_CH3_PROG_START 0x4E
Milo(Woogyom) Kim12f022d2013-02-05 19:25:26 +090065#define LP5523_REG_PROG_PAGE_SEL 0x4F
Samu Onkalo0efba162010-11-11 14:05:22 -080066#define LP5523_REG_PROG_MEM 0x50
67
Milo(Woogyom) Kim12f022d2013-02-05 19:25:26 +090068/* Bit description in registers */
Samu Onkalo0efba162010-11-11 14:05:22 -080069#define LP5523_ENABLE 0x40
70#define LP5523_AUTO_INC 0x40
71#define LP5523_PWR_SAVE 0x20
72#define LP5523_PWM_PWR_SAVE 0x04
Samu Onkalo0efba162010-11-11 14:05:22 -080073#define LP5523_CP_AUTO 0x18
Samu Onkalo0efba162010-11-11 14:05:22 -080074#define LP5523_AUTO_CLK 0x02
Milo(Woogyom) Kim12f022d2013-02-05 19:25:26 +090075
Samu Onkalo0efba162010-11-11 14:05:22 -080076#define LP5523_EN_LEDTEST 0x80
77#define LP5523_LEDTEST_DONE 0x80
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +090078#define LP5523_RESET 0xFF
Samu Onkalo0efba162010-11-11 14:05:22 -080079#define LP5523_ADC_SHORTCIRC_LIM 80
Samu Onkalo0efba162010-11-11 14:05:22 -080080#define LP5523_EXT_CLK_USED 0x08
Milo Kim22460432013-08-08 13:57:35 +090081#define LP5523_ENG_STATUS_MASK 0x07
Samu Onkalo0efba162010-11-11 14:05:22 -080082
Toshi Kikuchi52da81e2015-05-11 12:10:54 -070083#define LP5523_FADER_MAPPING_MASK 0xC0
84#define LP5523_FADER_MAPPING_SHIFT 6
85
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +090086/* Memory Page Selection */
87#define LP5523_PAGE_ENG1 0
88#define LP5523_PAGE_ENG2 1
89#define LP5523_PAGE_ENG3 2
Milo Kim45e611b2013-08-08 14:02:29 +090090#define LP5523_PAGE_MUX1 3
91#define LP5523_PAGE_MUX2 4
92#define LP5523_PAGE_MUX3 5
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +090093
94/* Program Memory Operations */
95#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */
96#define LP5523_MODE_ENG2_M 0x0C
97#define LP5523_MODE_ENG3_M 0x03
98#define LP5523_LOAD_ENG1 0x10
99#define LP5523_LOAD_ENG2 0x04
100#define LP5523_LOAD_ENG3 0x01
101
102#define LP5523_ENG1_IS_LOADING(mode) \
103 ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
104#define LP5523_ENG2_IS_LOADING(mode) \
105 ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
106#define LP5523_ENG3_IS_LOADING(mode) \
107 ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
108
109#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */
110#define LP5523_EXEC_ENG2_M 0x0C
111#define LP5523_EXEC_ENG3_M 0x03
112#define LP5523_EXEC_M 0x3F
113#define LP5523_RUN_ENG1 0x20
114#define LP5523_RUN_ENG2 0x08
115#define LP5523_RUN_ENG3 0x02
116
Milo Kim45e611b2013-08-08 14:02:29 +0900117#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
118
Kim, Milo27d77042012-09-04 15:06:18 +0800119enum lp5523_chip_id {
120 LP5523,
121 LP55231,
122};
123
Milo Kim22460432013-08-08 13:57:35 +0900124static int lp5523_init_program_engine(struct lp55xx_chip *chip);
125
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900126static inline void lp5523_wait_opmode_done(void)
127{
128 usleep_range(1000, 2000);
129}
130
Milo(Woogyom) Kima96bfa12013-02-05 19:09:32 +0900131static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
132{
133 led->led_current = led_current;
134 lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
135 led_current);
136}
137
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900138static int lp5523_post_init_device(struct lp55xx_chip *chip)
Samu Onkalo0efba162010-11-11 14:05:22 -0800139{
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900140 int ret;
Samu Onkalo0efba162010-11-11 14:05:22 -0800141
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900142 ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
Milo(Woogyom) Kim632418b2013-02-05 18:04:50 +0900143 if (ret)
144 return ret;
Samu Onkalo0efba162010-11-11 14:05:22 -0800145
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800146 /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
147 usleep_range(1000, 2000);
Samu Onkalo0efba162010-11-11 14:05:22 -0800148
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900149 ret = lp55xx_write(chip, LP5523_REG_CONFIG,
Samu Onkalo0efba162010-11-11 14:05:22 -0800150 LP5523_AUTO_INC | LP5523_PWR_SAVE |
151 LP5523_CP_AUTO | LP5523_AUTO_CLK |
152 LP5523_PWM_PWR_SAVE);
Milo(Woogyom) Kim632418b2013-02-05 18:04:50 +0900153 if (ret)
Jingoo Han1b21ec52012-10-28 18:45:11 -0700154 return ret;
155
Milo(Woogyom) Kim632418b2013-02-05 18:04:50 +0900156 /* turn on all leds */
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900157 ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
Milo(Woogyom) Kim632418b2013-02-05 18:04:50 +0900158 if (ret)
159 return ret;
Samu Onkalo0efba162010-11-11 14:05:22 -0800160
Milo Kim22460432013-08-08 13:57:35 +0900161 ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
162 if (ret)
163 return ret;
164
165 return lp5523_init_program_engine(chip);
Samu Onkalo0efba162010-11-11 14:05:22 -0800166}
167
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900168static void lp5523_load_engine(struct lp55xx_chip *chip)
Samu Onkalo0efba162010-11-11 14:05:22 -0800169{
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900170 enum lp55xx_engine_index idx = chip->engine_idx;
171 u8 mask[] = {
172 [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
173 [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
174 [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
175 };
Samu Onkalo0efba162010-11-11 14:05:22 -0800176
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900177 u8 val[] = {
178 [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
179 [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
180 [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
181 };
Samu Onkalo0efba162010-11-11 14:05:22 -0800182
Milo Kimb9e17302013-08-08 13:56:01 +0900183 lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
184
185 lp5523_wait_opmode_done();
186}
187
188static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
189{
190 enum lp55xx_engine_index idx = chip->engine_idx;
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900191 u8 page_sel[] = {
192 [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
193 [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
194 [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
195 };
Samu Onkalo0efba162010-11-11 14:05:22 -0800196
Milo Kimb9e17302013-08-08 13:56:01 +0900197 lp5523_load_engine(chip);
Samu Onkalo0efba162010-11-11 14:05:22 -0800198
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900199 lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
Samu Onkalo0efba162010-11-11 14:05:22 -0800200}
201
Milo Kim28c92662013-11-20 22:13:34 -0800202static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
Samu Onkalo0efba162010-11-11 14:05:22 -0800203{
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900204 lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
205 lp5523_wait_opmode_done();
Samu Onkalo0efba162010-11-11 14:05:22 -0800206}
207
Milo Kim28c92662013-11-20 22:13:34 -0800208static void lp5523_stop_engine(struct lp55xx_chip *chip)
209{
210 enum lp55xx_engine_index idx = chip->engine_idx;
211 u8 mask[] = {
212 [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
213 [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
214 [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
215 };
216
217 lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0);
218
219 lp5523_wait_opmode_done();
220}
221
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900222static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
Samu Onkalo0efba162010-11-11 14:05:22 -0800223{
224 int i;
Kim, Milo469eba02012-08-21 17:04:02 +0800225
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900226 for (i = 0; i < LP5523_MAX_LEDS; i++)
227 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
228}
229
230static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
231{
232 int ret;
233 u8 mode;
234 u8 exec;
235
236 /* stop engine */
237 if (!start) {
238 lp5523_stop_engine(chip);
239 lp5523_turn_off_channels(chip);
240 return;
Samu Onkalo0efba162010-11-11 14:05:22 -0800241 }
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900242
243 /*
244 * To run the engine,
245 * operation mode and enable register should updated at the same time
246 */
247
248 ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
249 if (ret)
250 return;
251
252 ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
253 if (ret)
254 return;
255
256 /* change operation mode to RUN only when each engine is loading */
257 if (LP5523_ENG1_IS_LOADING(mode)) {
258 mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
259 exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
260 }
261
262 if (LP5523_ENG2_IS_LOADING(mode)) {
263 mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
264 exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
265 }
266
267 if (LP5523_ENG3_IS_LOADING(mode)) {
268 mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
269 exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
270 }
271
272 lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
273 lp5523_wait_opmode_done();
274
275 lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
276}
277
Milo Kim22460432013-08-08 13:57:35 +0900278static int lp5523_init_program_engine(struct lp55xx_chip *chip)
279{
280 int i;
281 int j;
282 int ret;
283 u8 status;
284 /* one pattern per engine setting LED MUX start and stop addresses */
285 static const u8 pattern[][LP5523_PROGRAM_LENGTH] = {
286 { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
287 { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
288 { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
289 };
290
291 /* hardcode 32 bytes of memory for each engine from program memory */
292 ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
293 if (ret)
294 return ret;
295
296 ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
297 if (ret)
298 return ret;
299
300 ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
301 if (ret)
302 return ret;
303
304 /* write LED MUX address space for each engine */
305 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
306 chip->engine_idx = i;
307 lp5523_load_engine_and_select_page(chip);
308
309 for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
310 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
311 pattern[i - 1][j]);
312 if (ret)
313 goto out;
314 }
315 }
316
317 lp5523_run_engine(chip, true);
318
319 /* Let the programs run for couple of ms and check the engine status */
320 usleep_range(3000, 6000);
321 lp55xx_read(chip, LP5523_REG_STATUS, &status);
322 status &= LP5523_ENG_STATUS_MASK;
323
324 if (status != LP5523_ENG_STATUS_MASK) {
325 dev_err(&chip->cl->dev,
326 "cound not configure LED engine, status = 0x%.2x\n",
327 status);
328 ret = -1;
329 }
330
331out:
Milo Kim28c92662013-11-20 22:13:34 -0800332 lp5523_stop_all_engines(chip);
Milo Kim22460432013-08-08 13:57:35 +0900333 return ret;
334}
335
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900336static int lp5523_update_program_memory(struct lp55xx_chip *chip,
337 const u8 *data, size_t size)
338{
339 u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
340 unsigned cmd;
341 char c[3];
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900342 int nrchars;
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900343 int ret;
Milo Kim2f733ca2013-08-08 14:09:24 +0900344 int offset = 0;
345 int i = 0;
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900346
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900347 while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
348 /* separate sscanfs because length is working only for %s */
349 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
350 if (ret != 1)
351 goto err;
352
353 ret = sscanf(c, "%2x", &cmd);
354 if (ret != 1)
355 goto err;
356
357 pattern[i] = (u8)cmd;
358 offset += nrchars;
359 i++;
360 }
361
362 /* Each instruction is 16bit long. Check that length is even */
363 if (i % 2)
364 goto err;
365
Milo Kim2f733ca2013-08-08 14:09:24 +0900366 for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
Milo Kim45e611b2013-08-08 14:02:29 +0900367 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
Milo Kime70988d2013-12-02 17:21:44 -0800368 if (ret)
Milo Kim45e611b2013-08-08 14:02:29 +0900369 return -EINVAL;
Milo Kim45e611b2013-08-08 14:02:29 +0900370 }
371
Milo Kim45e611b2013-08-08 14:02:29 +0900372 return size;
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900373
374err:
375 dev_err(&chip->cl->dev, "wrong pattern format\n");
376 return -EINVAL;
Samu Onkalo0efba162010-11-11 14:05:22 -0800377}
378
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900379static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
Samu Onkalo0efba162010-11-11 14:05:22 -0800380{
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900381 const struct firmware *fw = chip->fw;
Samu Onkalo0efba162010-11-11 14:05:22 -0800382
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900383 if (fw->size > LP5523_PROGRAM_LENGTH) {
384 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
385 fw->size);
386 return;
387 }
388
389 /*
390 * Program momery sequence
391 * 1) set engine mode to "LOAD"
392 * 2) write firmware data into program memory
393 */
394
Milo Kimb9e17302013-08-08 13:56:01 +0900395 lp5523_load_engine_and_select_page(chip);
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900396 lp5523_update_program_memory(chip, fw->data, fw->size);
Samu Onkalo0efba162010-11-11 14:05:22 -0800397}
398
Milo Kim45e611b2013-08-08 14:02:29 +0900399static ssize_t show_engine_mode(struct device *dev,
400 struct device_attribute *attr,
401 char *buf, int nr)
402{
403 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
404 struct lp55xx_chip *chip = led->chip;
405 enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
406
407 switch (mode) {
408 case LP55XX_ENGINE_RUN:
409 return sprintf(buf, "run\n");
410 case LP55XX_ENGINE_LOAD:
411 return sprintf(buf, "load\n");
412 case LP55XX_ENGINE_DISABLED:
413 default:
414 return sprintf(buf, "disabled\n");
415 }
416}
417show_mode(1)
418show_mode(2)
419show_mode(3)
420
421static ssize_t store_engine_mode(struct device *dev,
422 struct device_attribute *attr,
423 const char *buf, size_t len, int nr)
424{
425 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
426 struct lp55xx_chip *chip = led->chip;
427 struct lp55xx_engine *engine = &chip->engines[nr - 1];
428
429 mutex_lock(&chip->lock);
430
431 chip->engine_idx = nr;
432
433 if (!strncmp(buf, "run", 3)) {
434 lp5523_run_engine(chip, true);
435 engine->mode = LP55XX_ENGINE_RUN;
436 } else if (!strncmp(buf, "load", 4)) {
437 lp5523_stop_engine(chip);
438 lp5523_load_engine(chip);
439 engine->mode = LP55XX_ENGINE_LOAD;
440 } else if (!strncmp(buf, "disabled", 8)) {
441 lp5523_stop_engine(chip);
442 engine->mode = LP55XX_ENGINE_DISABLED;
443 }
444
445 mutex_unlock(&chip->lock);
446
447 return len;
448}
449store_mode(1)
450store_mode(2)
451store_mode(3)
452
453static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
454{
455 u16 tmp_mux = 0;
456 int i;
457
458 len = min_t(int, len, LP5523_MAX_LEDS);
459
460 for (i = 0; i < len; i++) {
461 switch (buf[i]) {
462 case '1':
463 tmp_mux |= (1 << i);
464 break;
465 case '0':
466 break;
467 case '\n':
468 i = len;
469 break;
470 default:
471 return -1;
472 }
473 }
474 *mux = tmp_mux;
475
476 return 0;
477}
478
479static void lp5523_mux_to_array(u16 led_mux, char *array)
480{
481 int i, pos = 0;
482 for (i = 0; i < LP5523_MAX_LEDS; i++)
483 pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
484
485 array[pos] = '\0';
486}
487
488static ssize_t show_engine_leds(struct device *dev,
489 struct device_attribute *attr,
490 char *buf, int nr)
491{
492 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
493 struct lp55xx_chip *chip = led->chip;
494 char mux[LP5523_MAX_LEDS + 1];
495
496 lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
497
498 return sprintf(buf, "%s\n", mux);
499}
500show_leds(1)
501show_leds(2)
502show_leds(3)
503
504static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
505{
506 struct lp55xx_engine *engine = &chip->engines[nr - 1];
507 int ret;
508 u8 mux_page[] = {
509 [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
510 [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
511 [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
512 };
513
514 lp5523_load_engine(chip);
515
516 ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]);
517 if (ret)
518 return ret;
519
520 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8));
521 if (ret)
522 return ret;
523
524 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux));
525 if (ret)
526 return ret;
527
528 engine->led_mux = mux;
529 return 0;
530}
531
532static ssize_t store_engine_leds(struct device *dev,
533 struct device_attribute *attr,
534 const char *buf, size_t len, int nr)
535{
536 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
537 struct lp55xx_chip *chip = led->chip;
538 struct lp55xx_engine *engine = &chip->engines[nr - 1];
539 u16 mux = 0;
540 ssize_t ret;
541
542 if (lp5523_mux_parse(buf, &mux, len))
543 return -EINVAL;
544
545 mutex_lock(&chip->lock);
546
547 chip->engine_idx = nr;
548 ret = -EINVAL;
549
550 if (engine->mode != LP55XX_ENGINE_LOAD)
551 goto leave;
552
553 if (lp5523_load_mux(chip, mux, nr))
554 goto leave;
555
556 ret = len;
557leave:
558 mutex_unlock(&chip->lock);
559 return ret;
560}
561store_leds(1)
562store_leds(2)
563store_leds(3)
564
565static ssize_t store_engine_load(struct device *dev,
566 struct device_attribute *attr,
567 const char *buf, size_t len, int nr)
568{
569 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
570 struct lp55xx_chip *chip = led->chip;
Milo Kime70988d2013-12-02 17:21:44 -0800571 int ret;
Milo Kim45e611b2013-08-08 14:02:29 +0900572
573 mutex_lock(&chip->lock);
574
575 chip->engine_idx = nr;
576 lp5523_load_engine_and_select_page(chip);
Milo Kime70988d2013-12-02 17:21:44 -0800577 ret = lp5523_update_program_memory(chip, buf, len);
Milo Kim45e611b2013-08-08 14:02:29 +0900578
579 mutex_unlock(&chip->lock);
580
Milo Kime70988d2013-12-02 17:21:44 -0800581 return ret;
Milo Kim45e611b2013-08-08 14:02:29 +0900582}
583store_load(1)
584store_load(2)
585store_load(3)
586
Samu Onkalo0efba162010-11-11 14:05:22 -0800587static ssize_t lp5523_selftest(struct device *dev,
588 struct device_attribute *attr,
589 char *buf)
590{
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900591 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
592 struct lp55xx_chip *chip = led->chip;
593 struct lp55xx_platform_data *pdata = chip->pdata;
Samu Onkalo0efba162010-11-11 14:05:22 -0800594 int i, ret, pos = 0;
Samu Onkalo0efba162010-11-11 14:05:22 -0800595 u8 status, adc, vdd;
596
597 mutex_lock(&chip->lock);
598
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900599 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
Samu Onkalo0efba162010-11-11 14:05:22 -0800600 if (ret < 0)
601 goto fail;
602
603 /* Check that ext clock is really in use if requested */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900604 if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
Samu Onkalo0efba162010-11-11 14:05:22 -0800605 if ((status & LP5523_EXT_CLK_USED) == 0)
606 goto fail;
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900607 }
Samu Onkalo0efba162010-11-11 14:05:22 -0800608
609 /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900610 lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800611 usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900612 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
Jingoo Han1b21ec52012-10-28 18:45:11 -0700613 if (ret < 0)
614 goto fail;
615
Samu Onkalo0efba162010-11-11 14:05:22 -0800616 if (!(status & LP5523_LEDTEST_DONE))
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800617 usleep_range(3000, 6000); /* Was not ready. Wait little bit */
Samu Onkalo0efba162010-11-11 14:05:22 -0800618
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900619 ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
Jingoo Han1b21ec52012-10-28 18:45:11 -0700620 if (ret < 0)
621 goto fail;
622
Samu Onkalo0efba162010-11-11 14:05:22 -0800623 vdd--; /* There may be some fluctuation in measurement */
624
Milo(Woogyom) Kim0e202342013-02-05 19:07:34 +0900625 for (i = 0; i < LP5523_MAX_LEDS; i++) {
Samu Onkalo0efba162010-11-11 14:05:22 -0800626 /* Skip non-existing channels */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900627 if (pdata->led_config[i].led_current == 0)
Samu Onkalo0efba162010-11-11 14:05:22 -0800628 continue;
629
630 /* Set default current */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900631 lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
632 pdata->led_config[i].led_current);
Samu Onkalo0efba162010-11-11 14:05:22 -0800633
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900634 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800635 /* let current stabilize 2 - 4ms before measurements start */
636 usleep_range(2000, 4000);
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900637 lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
Samu Onkalo0efba162010-11-11 14:05:22 -0800638 LP5523_EN_LEDTEST | i);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800639 /* ADC conversion time is 2.7 ms typically */
640 usleep_range(3000, 6000);
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900641 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
Jingoo Han1b21ec52012-10-28 18:45:11 -0700642 if (ret < 0)
643 goto fail;
644
Samu Onkalo0efba162010-11-11 14:05:22 -0800645 if (!(status & LP5523_LEDTEST_DONE))
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800646 usleep_range(3000, 6000);/* Was not ready. Wait. */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900647
648 ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
Jingoo Han1b21ec52012-10-28 18:45:11 -0700649 if (ret < 0)
650 goto fail;
Samu Onkalo0efba162010-11-11 14:05:22 -0800651
652 if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
653 pos += sprintf(buf + pos, "LED %d FAIL\n", i);
654
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900655 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
Samu Onkalo0efba162010-11-11 14:05:22 -0800656
657 /* Restore current */
Milo(Woogyom) Kim9ca3bd82013-02-05 19:21:43 +0900658 lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
659 led->led_current);
Samu Onkalo0efba162010-11-11 14:05:22 -0800660 led++;
661 }
662 if (pos == 0)
663 pos = sprintf(buf, "OK\n");
664 goto release_lock;
665fail:
666 pos = sprintf(buf, "FAIL\n");
667
668release_lock:
669 mutex_unlock(&chip->lock);
670
671 return pos;
672}
673
Toshi Kikuchi52da81e2015-05-11 12:10:54 -0700674#define show_fader(nr) \
675static ssize_t show_master_fader##nr(struct device *dev, \
676 struct device_attribute *attr, \
677 char *buf) \
678{ \
679 return show_master_fader(dev, attr, buf, nr); \
680}
681
682#define store_fader(nr) \
683static ssize_t store_master_fader##nr(struct device *dev, \
684 struct device_attribute *attr, \
685 const char *buf, size_t len) \
686{ \
687 return store_master_fader(dev, attr, buf, len, nr); \
688}
689
690static ssize_t show_master_fader(struct device *dev,
691 struct device_attribute *attr,
692 char *buf, int nr)
693{
694 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
695 struct lp55xx_chip *chip = led->chip;
696 int ret;
697 u8 val;
698
699 mutex_lock(&chip->lock);
700 ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val);
701 mutex_unlock(&chip->lock);
702
703 if (ret == 0)
704 ret = sprintf(buf, "%u\n", val);
705
706 return ret;
707}
708show_fader(1)
709show_fader(2)
710show_fader(3)
711
712static ssize_t store_master_fader(struct device *dev,
713 struct device_attribute *attr,
714 const char *buf, size_t len, int nr)
715{
716 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
717 struct lp55xx_chip *chip = led->chip;
718 int ret;
719 unsigned long val;
720
721 if (kstrtoul(buf, 0, &val))
722 return -EINVAL;
723
724 if (val > 0xff)
725 return -EINVAL;
726
727 mutex_lock(&chip->lock);
728 ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1,
729 (u8)val);
730 mutex_unlock(&chip->lock);
731
732 if (ret == 0)
733 ret = len;
734
735 return ret;
736}
737store_fader(1)
738store_fader(2)
739store_fader(3)
740
741static ssize_t show_master_fader_leds(struct device *dev,
742 struct device_attribute *attr,
743 char *buf)
744{
745 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
746 struct lp55xx_chip *chip = led->chip;
747 int i, ret, pos = 0;
748 u8 val;
749
750 mutex_lock(&chip->lock);
751
752 for (i = 0; i < LP5523_MAX_LEDS; i++) {
753 ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val);
754 if (ret)
755 goto leave;
756
757 val = (val & LP5523_FADER_MAPPING_MASK)
758 >> LP5523_FADER_MAPPING_SHIFT;
759 if (val > 3) {
760 ret = -EINVAL;
761 goto leave;
762 }
763 buf[pos++] = val + '0';
764 }
765 buf[pos++] = '\n';
766 ret = pos;
767leave:
768 mutex_unlock(&chip->lock);
769 return ret;
770}
771
772static ssize_t store_master_fader_leds(struct device *dev,
773 struct device_attribute *attr,
774 const char *buf, size_t len)
775{
776 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
777 struct lp55xx_chip *chip = led->chip;
778 int i, n, ret;
779 u8 val;
780
781 n = min_t(int, len, LP5523_MAX_LEDS);
782
783 mutex_lock(&chip->lock);
784
785 for (i = 0; i < n; i++) {
786 if (buf[i] >= '0' && buf[i] <= '3') {
787 val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT;
788 ret = lp55xx_update_bits(chip,
789 LP5523_REG_LED_CTRL_BASE + i,
790 LP5523_FADER_MAPPING_MASK,
791 val);
792 if (ret)
793 goto leave;
794 } else {
795 ret = -EINVAL;
796 goto leave;
797 }
798 }
799 ret = len;
800leave:
801 mutex_unlock(&chip->lock);
802 return ret;
803}
804
Andrew Lunn95b2af62015-08-20 12:22:57 +0200805static int lp5523_led_brightness(struct lp55xx_led *led)
Samu Onkalo0efba162010-11-11 14:05:22 -0800806{
Milo(Woogyom) Kima6e46792013-02-05 19:08:40 +0900807 struct lp55xx_chip *chip = led->chip;
Andrew Lunn95b2af62015-08-20 12:22:57 +0200808 int ret;
Samu Onkalo0efba162010-11-11 14:05:22 -0800809
810 mutex_lock(&chip->lock);
Andrew Lunn95b2af62015-08-20 12:22:57 +0200811 ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
Samu Onkalo0efba162010-11-11 14:05:22 -0800812 led->brightness);
Samu Onkalo0efba162010-11-11 14:05:22 -0800813 mutex_unlock(&chip->lock);
Andrew Lunn95b2af62015-08-20 12:22:57 +0200814 return ret;
Samu Onkalo0efba162010-11-11 14:05:22 -0800815}
816
Milo Kim45e611b2013-08-08 14:02:29 +0900817static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
818static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
819static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
820static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds);
821static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds);
822static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds);
823static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
824static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
825static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
826static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
Toshi Kikuchi52da81e2015-05-11 12:10:54 -0700827static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1,
828 store_master_fader1);
829static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2,
830 store_master_fader2);
831static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3,
832 store_master_fader3);
833static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds,
834 store_master_fader_leds);
Samu Onkalo0efba162010-11-11 14:05:22 -0800835
836static struct attribute *lp5523_attributes[] = {
Milo Kim45e611b2013-08-08 14:02:29 +0900837 &dev_attr_engine1_mode.attr,
838 &dev_attr_engine2_mode.attr,
839 &dev_attr_engine3_mode.attr,
840 &dev_attr_engine1_load.attr,
841 &dev_attr_engine2_load.attr,
842 &dev_attr_engine3_load.attr,
843 &dev_attr_engine1_leds.attr,
844 &dev_attr_engine2_leds.attr,
845 &dev_attr_engine3_leds.attr,
Samu Onkalo0efba162010-11-11 14:05:22 -0800846 &dev_attr_selftest.attr,
Toshi Kikuchi52da81e2015-05-11 12:10:54 -0700847 &dev_attr_master_fader1.attr,
848 &dev_attr_master_fader2.attr,
849 &dev_attr_master_fader3.attr,
850 &dev_attr_master_fader_leds.attr,
Kim, Milof1625842012-09-12 20:16:03 +0800851 NULL,
Samu Onkalo0efba162010-11-11 14:05:22 -0800852};
853
854static const struct attribute_group lp5523_group = {
855 .attrs = lp5523_attributes,
856};
857
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900858/* Chip specific configurations */
859static struct lp55xx_device_config lp5523_cfg = {
860 .reset = {
861 .addr = LP5523_REG_RESET,
862 .val = LP5523_RESET,
863 },
Milo(Woogyom) Kime3a700d2013-02-05 18:09:56 +0900864 .enable = {
865 .addr = LP5523_REG_ENABLE,
866 .val = LP5523_ENABLE,
867 },
Milo(Woogyom) Kim0e202342013-02-05 19:07:34 +0900868 .max_channel = LP5523_MAX_LEDS,
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900869 .post_init_device = lp5523_post_init_device,
Andrew Lunn95b2af62015-08-20 12:22:57 +0200870 .brightness_fn = lp5523_led_brightness,
Milo(Woogyom) Kima96bfa12013-02-05 19:09:32 +0900871 .set_led_current = lp5523_set_led_current,
Milo(Woogyom) Kimdb6eaf82013-02-05 19:18:51 +0900872 .firmware_cb = lp5523_firmware_loaded,
873 .run_engine = lp5523_run_engine,
Milo(Woogyom) Kime73c0ce2013-02-05 19:20:45 +0900874 .dev_attr_group = &lp5523_group,
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900875};
876
Bill Pemberton98ea1ea2012-11-19 13:23:02 -0500877static int lp5523_probe(struct i2c_client *client,
Samu Onkalo0efba162010-11-11 14:05:22 -0800878 const struct i2c_device_id *id)
879{
Milo(Woogyom) Kim22ebeb42013-02-05 18:58:35 +0900880 int ret;
Milo(Woogyom) Kim6a0c9a42013-02-05 18:03:08 +0900881 struct lp55xx_chip *chip;
882 struct lp55xx_led *led;
Milo Kimed1333522015-08-24 16:09:55 +0900883 struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
Linus Walleij7542a04b2013-04-23 04:52:59 -0700884 struct device_node *np = client->dev.of_node;
Samu Onkalo0efba162010-11-11 14:05:22 -0800885
Milo Kimed1333522015-08-24 16:09:55 +0900886 if (!pdata) {
Linus Walleij7542a04b2013-04-23 04:52:59 -0700887 if (np) {
Milo Kimed1333522015-08-24 16:09:55 +0900888 pdata = lp55xx_of_populate_pdata(&client->dev, np);
889 if (IS_ERR(pdata))
890 return PTR_ERR(pdata);
Linus Walleij7542a04b2013-04-23 04:52:59 -0700891 } else {
892 dev_err(&client->dev, "no platform data\n");
893 return -EINVAL;
894 }
Samu Onkalo0efba162010-11-11 14:05:22 -0800895 }
896
Milo(Woogyom) Kim6a0c9a42013-02-05 18:03:08 +0900897 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
898 if (!chip)
899 return -ENOMEM;
Samu Onkalo0efba162010-11-11 14:05:22 -0800900
Milo(Woogyom) Kim6a0c9a42013-02-05 18:03:08 +0900901 led = devm_kzalloc(&client->dev,
902 sizeof(*led) * pdata->num_channels, GFP_KERNEL);
903 if (!led)
904 return -ENOMEM;
905
906 chip->cl = client;
907 chip->pdata = pdata;
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900908 chip->cfg = &lp5523_cfg;
Milo(Woogyom) Kim6a0c9a42013-02-05 18:03:08 +0900909
910 mutex_init(&chip->lock);
911
912 i2c_set_clientdata(client, led);
Samu Onkalo0efba162010-11-11 14:05:22 -0800913
Milo(Woogyom) Kim22ebeb42013-02-05 18:58:35 +0900914 ret = lp55xx_init_device(chip);
Samu Onkalo0efba162010-11-11 14:05:22 -0800915 if (ret)
Milo(Woogyom) Kimf6c64c62013-02-05 17:58:01 +0900916 goto err_init;
Samu Onkalo0efba162010-11-11 14:05:22 -0800917
Kim, Milo56a1e9a2012-09-04 15:06:26 +0800918 dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
Samu Onkalo0efba162010-11-11 14:05:22 -0800919
Milo(Woogyom) Kim9e9b3db2013-02-05 19:06:27 +0900920 ret = lp55xx_register_leds(led, chip);
Milo(Woogyom) Kimf6524802013-02-05 17:53:40 +0900921 if (ret)
Milo(Woogyom) Kim9e9b3db2013-02-05 19:06:27 +0900922 goto err_register_leds;
Samu Onkalo0efba162010-11-11 14:05:22 -0800923
Milo(Woogyom) Kime73c0ce2013-02-05 19:20:45 +0900924 ret = lp55xx_register_sysfs(chip);
Samu Onkalo0efba162010-11-11 14:05:22 -0800925 if (ret) {
926 dev_err(&client->dev, "registering sysfs failed\n");
Milo(Woogyom) Kime73c0ce2013-02-05 19:20:45 +0900927 goto err_register_sysfs;
Samu Onkalo0efba162010-11-11 14:05:22 -0800928 }
Milo(Woogyom) Kime73c0ce2013-02-05 19:20:45 +0900929
930 return 0;
931
932err_register_sysfs:
Milo(Woogyom) Kimc3a68eb2013-02-05 19:11:18 +0900933 lp55xx_unregister_leds(led, chip);
Milo(Woogyom) Kim9e9b3db2013-02-05 19:06:27 +0900934err_register_leds:
Milo(Woogyom) Kim6ce61762013-02-05 19:03:02 +0900935 lp55xx_deinit_device(chip);
Milo(Woogyom) Kimf6c64c62013-02-05 17:58:01 +0900936err_init:
Samu Onkalo0efba162010-11-11 14:05:22 -0800937 return ret;
938}
939
940static int lp5523_remove(struct i2c_client *client)
941{
Milo(Woogyom) Kim6ce61762013-02-05 19:03:02 +0900942 struct lp55xx_led *led = i2c_get_clientdata(client);
943 struct lp55xx_chip *chip = led->chip;
Samu Onkalo0efba162010-11-11 14:05:22 -0800944
Milo Kim28c92662013-11-20 22:13:34 -0800945 lp5523_stop_all_engines(chip);
Milo(Woogyom) Kim87cc4bd2013-02-05 19:23:51 +0900946 lp55xx_unregister_sysfs(chip);
Milo(Woogyom) Kimc3a68eb2013-02-05 19:11:18 +0900947 lp55xx_unregister_leds(led, chip);
Milo(Woogyom) Kim6ce61762013-02-05 19:03:02 +0900948 lp55xx_deinit_device(chip);
Samu Onkalo0efba162010-11-11 14:05:22 -0800949
Samu Onkalo0efba162010-11-11 14:05:22 -0800950 return 0;
951}
952
953static const struct i2c_device_id lp5523_id[] = {
Kim, Milo27d77042012-09-04 15:06:18 +0800954 { "lp5523", LP5523 },
955 { "lp55231", LP55231 },
Samu Onkalo0efba162010-11-11 14:05:22 -0800956 { }
957};
958
959MODULE_DEVICE_TABLE(i2c, lp5523_id);
960
Axel Lin33c88b62013-05-08 21:48:57 -0700961#ifdef CONFIG_OF
962static const struct of_device_id of_lp5523_leds_match[] = {
963 { .compatible = "national,lp5523", },
Daniel Mack9ef8c872014-05-05 04:46:54 -0700964 { .compatible = "ti,lp55231", },
Axel Lin33c88b62013-05-08 21:48:57 -0700965 {},
966};
967
968MODULE_DEVICE_TABLE(of, of_lp5523_leds_match);
969#endif
970
Samu Onkalo0efba162010-11-11 14:05:22 -0800971static struct i2c_driver lp5523_driver = {
972 .driver = {
Kim, Milo27d77042012-09-04 15:06:18 +0800973 .name = "lp5523x",
Axel Lin33c88b62013-05-08 21:48:57 -0700974 .of_match_table = of_match_ptr(of_lp5523_leds_match),
Samu Onkalo0efba162010-11-11 14:05:22 -0800975 },
976 .probe = lp5523_probe,
977 .remove = lp5523_remove,
978 .id_table = lp5523_id,
979};
980
Axel Lin09a0d182012-01-10 15:09:27 -0800981module_i2c_driver(lp5523_driver);
Samu Onkalo0efba162010-11-11 14:05:22 -0800982
983MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
Milo(Woogyom) Kima2387cb2013-02-05 19:28:00 +0900984MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
Samu Onkalo0efba162010-11-11 14:05:22 -0800985MODULE_DESCRIPTION("LP5523 LED engine");
986MODULE_LICENSE("GPL");