blob: 37e9c8ca498333e2d2d5c2d4ae6c841bb796a471 [file] [log] [blame]
Rob Herring603c5f92015-05-29 11:38:42 -05001/*
2 * Copyright (C) 2015 Linaro, Ltd.
3 * Rob Herring <robh@kernel.org>
4 *
5 * Based on vendor driver:
6 * Copyright (C) 2013 Marvell Inc.
7 * Author: Chao Xie <xiechao.mail@gmail.com>
8 *
9 * This software is licensed under the terms of the GNU General Public
10 * License version 2, as published by the Free Software Foundation, and
11 * may be copied, distributed, and modified under those terms.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 */
19
20#include <linux/delay.h>
21#include <linux/slab.h>
22#include <linux/of.h>
23#include <linux/of_device.h>
24#include <linux/io.h>
25#include <linux/err.h>
26#include <linux/clk.h>
27#include <linux/module.h>
28#include <linux/platform_device.h>
29#include <linux/phy/phy.h>
30
31/* USB PXA1928 PHY mapping */
32#define PHY_28NM_PLL_REG0 0x0
33#define PHY_28NM_PLL_REG1 0x4
34#define PHY_28NM_CAL_REG 0x8
35#define PHY_28NM_TX_REG0 0x0c
36#define PHY_28NM_TX_REG1 0x10
37#define PHY_28NM_RX_REG0 0x14
38#define PHY_28NM_RX_REG1 0x18
39#define PHY_28NM_DIG_REG0 0x1c
40#define PHY_28NM_DIG_REG1 0x20
41#define PHY_28NM_TEST_REG0 0x24
42#define PHY_28NM_TEST_REG1 0x28
43#define PHY_28NM_MOC_REG 0x2c
44#define PHY_28NM_PHY_RESERVE 0x30
45#define PHY_28NM_OTG_REG 0x34
46#define PHY_28NM_CHRG_DET 0x38
47#define PHY_28NM_CTRL_REG0 0xc4
48#define PHY_28NM_CTRL_REG1 0xc8
49#define PHY_28NM_CTRL_REG2 0xd4
50#define PHY_28NM_CTRL_REG3 0xdc
51
52/* PHY_28NM_PLL_REG0 */
53#define PHY_28NM_PLL_READY BIT(31)
54
55#define PHY_28NM_PLL_SELLPFR_SHIFT 28
56#define PHY_28NM_PLL_SELLPFR_MASK (0x3 << 28)
57
58#define PHY_28NM_PLL_FBDIV_SHIFT 16
59#define PHY_28NM_PLL_FBDIV_MASK (0x1ff << 16)
60
61#define PHY_28NM_PLL_ICP_SHIFT 8
62#define PHY_28NM_PLL_ICP_MASK (0x7 << 8)
63
64#define PHY_28NM_PLL_REFDIV_SHIFT 0
65#define PHY_28NM_PLL_REFDIV_MASK 0x7f
66
67/* PHY_28NM_PLL_REG1 */
68#define PHY_28NM_PLL_PU_BY_REG BIT(1)
69
70#define PHY_28NM_PLL_PU_PLL BIT(0)
71
72/* PHY_28NM_CAL_REG */
73#define PHY_28NM_PLL_PLLCAL_DONE BIT(31)
74
75#define PHY_28NM_PLL_IMPCAL_DONE BIT(23)
76
77#define PHY_28NM_PLL_KVCO_SHIFT 16
78#define PHY_28NM_PLL_KVCO_MASK (0x7 << 16)
79
80#define PHY_28NM_PLL_CAL12_SHIFT 20
81#define PHY_28NM_PLL_CAL12_MASK (0x3 << 20)
82
83#define PHY_28NM_IMPCAL_VTH_SHIFT 8
84#define PHY_28NM_IMPCAL_VTH_MASK (0x7 << 8)
85
86#define PHY_28NM_PLLCAL_START_SHIFT 22
87#define PHY_28NM_IMPCAL_START_SHIFT 13
88
89/* PHY_28NM_TX_REG0 */
90#define PHY_28NM_TX_PU_BY_REG BIT(25)
91
92#define PHY_28NM_TX_PU_ANA BIT(24)
93
94#define PHY_28NM_TX_AMP_SHIFT 20
95#define PHY_28NM_TX_AMP_MASK (0x7 << 20)
96
97/* PHY_28NM_RX_REG0 */
98#define PHY_28NM_RX_SQ_THRESH_SHIFT 0
99#define PHY_28NM_RX_SQ_THRESH_MASK (0xf << 0)
100
101/* PHY_28NM_RX_REG1 */
102#define PHY_28NM_RX_SQCAL_DONE BIT(31)
103
104/* PHY_28NM_DIG_REG0 */
105#define PHY_28NM_DIG_BITSTAFFING_ERR BIT(31)
106#define PHY_28NM_DIG_SYNC_ERR BIT(30)
107
108#define PHY_28NM_DIG_SQ_FILT_SHIFT 16
109#define PHY_28NM_DIG_SQ_FILT_MASK (0x7 << 16)
110
111#define PHY_28NM_DIG_SQ_BLK_SHIFT 12
112#define PHY_28NM_DIG_SQ_BLK_MASK (0x7 << 12)
113
114#define PHY_28NM_DIG_SYNC_NUM_SHIFT 0
115#define PHY_28NM_DIG_SYNC_NUM_MASK (0x3 << 0)
116
117#define PHY_28NM_PLL_LOCK_BYPASS BIT(7)
118
119/* PHY_28NM_OTG_REG */
120#define PHY_28NM_OTG_CONTROL_BY_PIN BIT(5)
121#define PHY_28NM_OTG_PU_OTG BIT(4)
122
123#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DM_SHIFT_28 13
124#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DP_SHIFT_28 12
125#define PHY_28NM_CHGDTC_VSRC_CHARGE_SHIFT_28 10
126#define PHY_28NM_CHGDTC_VDAT_CHARGE_SHIFT_28 8
127#define PHY_28NM_CHGDTC_CDP_DM_AUTO_SWITCH_SHIFT_28 7
128#define PHY_28NM_CHGDTC_DP_DM_SWAP_SHIFT_28 6
129#define PHY_28NM_CHGDTC_PU_CHRG_DTC_SHIFT_28 5
130#define PHY_28NM_CHGDTC_PD_EN_SHIFT_28 4
131#define PHY_28NM_CHGDTC_DCP_EN_SHIFT_28 3
132#define PHY_28NM_CHGDTC_CDP_EN_SHIFT_28 2
133#define PHY_28NM_CHGDTC_TESTMON_CHRGDTC_SHIFT_28 0
134
135#define PHY_28NM_CTRL1_CHRG_DTC_OUT_SHIFT_28 4
136#define PHY_28NM_CTRL1_VBUSDTC_OUT_SHIFT_28 2
137
138#define PHY_28NM_CTRL3_OVERWRITE BIT(0)
139#define PHY_28NM_CTRL3_VBUS_VALID BIT(4)
140#define PHY_28NM_CTRL3_AVALID BIT(5)
141#define PHY_28NM_CTRL3_BVALID BIT(6)
142
143struct mv_usb2_phy {
144 struct phy *phy;
145 struct platform_device *pdev;
146 void __iomem *base;
147 struct clk *clk;
148};
149
150static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
151{
152 timeout += jiffies;
153 while (time_is_after_eq_jiffies(timeout)) {
154 if ((readl(reg) & mask) == mask)
155 return true;
156 msleep(1);
157 }
158 return false;
159}
160
161static int mv_usb2_phy_28nm_init(struct phy *phy)
162{
163 struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
164 struct platform_device *pdev = mv_phy->pdev;
165 void __iomem *base = mv_phy->base;
166 u32 reg;
167 int ret;
168
169 clk_prepare_enable(mv_phy->clk);
170
171 /* PHY_28NM_PLL_REG0 */
172 reg = readl(base + PHY_28NM_PLL_REG0) &
173 ~(PHY_28NM_PLL_SELLPFR_MASK | PHY_28NM_PLL_FBDIV_MASK
174 | PHY_28NM_PLL_ICP_MASK | PHY_28NM_PLL_REFDIV_MASK);
175 writel(reg | (0x1 << PHY_28NM_PLL_SELLPFR_SHIFT
176 | 0xf0 << PHY_28NM_PLL_FBDIV_SHIFT
177 | 0x3 << PHY_28NM_PLL_ICP_SHIFT
178 | 0xd << PHY_28NM_PLL_REFDIV_SHIFT),
179 base + PHY_28NM_PLL_REG0);
180
181 /* PHY_28NM_PLL_REG1 */
182 reg = readl(base + PHY_28NM_PLL_REG1);
183 writel(reg | PHY_28NM_PLL_PU_PLL | PHY_28NM_PLL_PU_BY_REG,
184 base + PHY_28NM_PLL_REG1);
185
186 /* PHY_28NM_TX_REG0 */
187 reg = readl(base + PHY_28NM_TX_REG0) & ~PHY_28NM_TX_AMP_MASK;
188 writel(reg | PHY_28NM_TX_PU_BY_REG | 0x3 << PHY_28NM_TX_AMP_SHIFT |
189 PHY_28NM_TX_PU_ANA,
190 base + PHY_28NM_TX_REG0);
191
192 /* PHY_28NM_RX_REG0 */
193 reg = readl(base + PHY_28NM_RX_REG0) & ~PHY_28NM_RX_SQ_THRESH_MASK;
194 writel(reg | 0xa << PHY_28NM_RX_SQ_THRESH_SHIFT,
195 base + PHY_28NM_RX_REG0);
196
197 /* PHY_28NM_DIG_REG0 */
198 reg = readl(base + PHY_28NM_DIG_REG0) &
199 ~(PHY_28NM_DIG_BITSTAFFING_ERR | PHY_28NM_DIG_SYNC_ERR |
200 PHY_28NM_DIG_SQ_FILT_MASK | PHY_28NM_DIG_SQ_BLK_MASK |
201 PHY_28NM_DIG_SYNC_NUM_MASK);
202 writel(reg | (0x1 << PHY_28NM_DIG_SYNC_NUM_SHIFT |
203 PHY_28NM_PLL_LOCK_BYPASS),
204 base + PHY_28NM_DIG_REG0);
205
206 /* PHY_28NM_OTG_REG */
207 reg = readl(base + PHY_28NM_OTG_REG) | PHY_28NM_OTG_PU_OTG;
208 writel(reg & ~PHY_28NM_OTG_CONTROL_BY_PIN, base + PHY_28NM_OTG_REG);
209
210 /*
211 * Calibration Timing
212 * ____________________________
213 * CAL START ___|
214 * ____________________
215 * CAL_DONE ___________|
216 * | 400us |
217 */
218
219 /* Make sure PHY Calibration is ready */
220 if (!wait_for_reg(base + PHY_28NM_CAL_REG,
221 PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE,
222 HZ / 10)) {
223 dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after 100mS.");
224 ret = -ETIMEDOUT;
225 goto err_clk;
226 }
227 if (!wait_for_reg(base + PHY_28NM_RX_REG1,
228 PHY_28NM_RX_SQCAL_DONE, HZ / 10)) {
229 dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after 100mS.");
230 ret = -ETIMEDOUT;
231 goto err_clk;
232 }
233 /* Make sure PHY PLL is ready */
234 if (!wait_for_reg(base + PHY_28NM_PLL_REG0,
235 PHY_28NM_PLL_READY, HZ / 10)) {
236 dev_warn(&pdev->dev, "PLL_READY not set after 100mS.");
237 ret = -ETIMEDOUT;
238 goto err_clk;
239 }
240
241 return 0;
242err_clk:
243 clk_disable_unprepare(mv_phy->clk);
244 return ret;
245}
246
247static int mv_usb2_phy_28nm_power_on(struct phy *phy)
248{
249 struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
250 void __iomem *base = mv_phy->base;
251
252 writel(readl(base + PHY_28NM_CTRL_REG3) |
253 (PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID |
254 PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
255 base + PHY_28NM_CTRL_REG3);
256
257 return 0;
258}
259
260static int mv_usb2_phy_28nm_power_off(struct phy *phy)
261{
262 struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
263 void __iomem *base = mv_phy->base;
264
265 writel(readl(base + PHY_28NM_CTRL_REG3) |
266 ~(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID
267 | PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
268 base + PHY_28NM_CTRL_REG3);
269
270 return 0;
271}
272
273static int mv_usb2_phy_28nm_exit(struct phy *phy)
274{
275 struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
276 void __iomem *base = mv_phy->base;
277 unsigned int val;
278
279 val = readw(base + PHY_28NM_PLL_REG1);
280 val &= ~PHY_28NM_PLL_PU_PLL;
281 writew(val, base + PHY_28NM_PLL_REG1);
282
283 /* power down PHY Analog part */
284 val = readw(base + PHY_28NM_TX_REG0);
285 val &= ~PHY_28NM_TX_PU_ANA;
286 writew(val, base + PHY_28NM_TX_REG0);
287
288 /* power down PHY OTG part */
289 val = readw(base + PHY_28NM_OTG_REG);
290 val &= ~PHY_28NM_OTG_PU_OTG;
291 writew(val, base + PHY_28NM_OTG_REG);
292
293 clk_disable_unprepare(mv_phy->clk);
294 return 0;
295}
296
297static const struct phy_ops usb_ops = {
298 .init = mv_usb2_phy_28nm_init,
299 .power_on = mv_usb2_phy_28nm_power_on,
300 .power_off = mv_usb2_phy_28nm_power_off,
301 .exit = mv_usb2_phy_28nm_exit,
302 .owner = THIS_MODULE,
303};
304
305static int mv_usb2_phy_probe(struct platform_device *pdev)
306{
307 struct phy_provider *phy_provider;
308 struct mv_usb2_phy *mv_phy;
309 struct resource *r;
310
311 mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
312 if (!mv_phy)
313 return -ENOMEM;
314
315 mv_phy->pdev = pdev;
316
317 mv_phy->clk = devm_clk_get(&pdev->dev, NULL);
318 if (IS_ERR(mv_phy->clk)) {
319 dev_err(&pdev->dev, "failed to get clock.\n");
320 return PTR_ERR(mv_phy->clk);
321 }
322
323 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
324 mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
325 if (IS_ERR(mv_phy->base))
326 return PTR_ERR(mv_phy->base);
327
328 mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &usb_ops);
329 if (IS_ERR(mv_phy->phy))
330 return PTR_ERR(mv_phy->phy);
331
332 phy_set_drvdata(mv_phy->phy, mv_phy);
333
334 phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
335 return PTR_ERR_OR_ZERO(phy_provider);
336}
337
338static const struct of_device_id mv_usbphy_dt_match[] = {
339 { .compatible = "marvell,pxa1928-usb-phy", },
340 {},
341};
342MODULE_DEVICE_TABLE(of, mv_usbphy_dt_match);
343
344static struct platform_driver mv_usb2_phy_driver = {
345 .probe = mv_usb2_phy_probe,
346 .driver = {
347 .name = "mv-usb2-phy",
348 .of_match_table = of_match_ptr(mv_usbphy_dt_match),
349 },
350};
351module_platform_driver(mv_usb2_phy_driver);
352
353MODULE_AUTHOR("Rob Herring <robh@kernel.org>");
354MODULE_DESCRIPTION("Marvell USB2 phy driver");
355MODULE_LICENSE("GPL v2");