blob: 3c4886b849f57e21d4fbde30fd7b633139165790 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# File system configuration
3#
4
5menu "File systems"
6
David Howells93614012006-09-30 20:45:40 +02007if BLOCK
8
Linus Torvalds1da177e2005-04-16 15:20:36 -07009config EXT2_FS
10 tristate "Second extended fs support"
11 help
12 Ext2 is a standard Linux file system for hard disks.
13
14 To compile this file system support as a module, choose M here: the
Jan Engelhardtd23edbd2006-12-12 19:07:45 +010015 module will be called ext2.
Linus Torvalds1da177e2005-04-16 15:20:36 -070016
17 If unsure, say Y.
18
19config EXT2_FS_XATTR
20 bool "Ext2 extended attributes"
21 depends on EXT2_FS
22 help
23 Extended attributes are name:value pairs associated with inodes by
24 the kernel or by users (see the attr(5) manual page, or visit
25 <http://acl.bestbits.at/> for details).
26
27 If unsure, say N.
28
29config EXT2_FS_POSIX_ACL
30 bool "Ext2 POSIX Access Control Lists"
31 depends on EXT2_FS_XATTR
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -070032 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -070033 help
34 Posix Access Control Lists (ACLs) support permissions for users and
35 groups beyond the owner/group/world scheme.
36
37 To learn more about Access Control Lists, visit the Posix ACLs for
38 Linux website <http://acl.bestbits.at/>.
39
40 If you don't know what Access Control Lists are, say N
41
42config EXT2_FS_SECURITY
43 bool "Ext2 Security Labels"
44 depends on EXT2_FS_XATTR
45 help
46 Security labels support alternative access control models
47 implemented by security modules like SELinux. This option
48 enables an extended attribute handler for file security
49 labels in the ext2 filesystem.
50
51 If you are not using a security module that requires using
52 extended attributes for file security labels, say N.
53
Carsten Otte6d791252005-06-23 22:05:26 -070054config EXT2_FS_XIP
55 bool "Ext2 execute in place support"
Al Viro0c426f22006-06-23 02:04:08 -070056 depends on EXT2_FS && MMU
Carsten Otte6d791252005-06-23 22:05:26 -070057 help
58 Execute in place can be used on memory-backed block devices. If you
59 enable this option, you can select to mount block devices which are
60 capable of this feature without using the page cache.
61
62 If you do not use a block device that is capable of using this,
63 or if unsure, say N.
64
65config FS_XIP
66# execute in place
67 bool
68 depends on EXT2_FS_XIP
69 default y
70
Linus Torvalds1da177e2005-04-16 15:20:36 -070071config EXT3_FS
72 tristate "Ext3 journalling file system support"
Mark Fashehb4e40a52005-12-15 14:31:24 -080073 select JBD
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 help
Matt LaPlantecc2e2762006-10-03 22:22:29 +020075 This is the journalling version of the Second extended file system
Linus Torvalds1da177e2005-04-16 15:20:36 -070076 (often called ext3), the de facto standard Linux file system
77 (method to organize files on a storage device) for hard disks.
78
Matt LaPlantecc2e2762006-10-03 22:22:29 +020079 The journalling code included in this driver means you do not have
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 to run e2fsck (file system checker) on your file systems after a
81 crash. The journal keeps track of any changes that were being made
82 at the time the system crashed, and can ensure that your file system
83 is consistent without the need for a lengthy check.
84
85 Other than adding the journal to the file system, the on-disk format
86 of ext3 is identical to ext2. It is possible to freely switch
87 between using the ext3 driver and the ext2 driver, as long as the
88 file system has been cleanly unmounted, or e2fsck is run on the file
89 system.
90
91 To add a journal on an existing ext2 file system or change the
92 behavior of ext3 file systems, you can use the tune2fs utility ("man
93 tune2fs"). To modify attributes of files and directories on ext3
94 file systems, use chattr ("man chattr"). You need to be using
95 e2fsprogs version 1.20 or later in order to create ext3 journals
96 (available at <http://sourceforge.net/projects/e2fsprogs/>).
97
98 To compile this file system support as a module, choose M here: the
Jan Engelhardtd23edbd2006-12-12 19:07:45 +010099 module will be called ext3.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100
101config EXT3_FS_XATTR
102 bool "Ext3 extended attributes"
103 depends on EXT3_FS
104 default y
105 help
106 Extended attributes are name:value pairs associated with inodes by
107 the kernel or by users (see the attr(5) manual page, or visit
108 <http://acl.bestbits.at/> for details).
109
110 If unsure, say N.
111
112 You need this for POSIX ACL support on ext3.
113
114config EXT3_FS_POSIX_ACL
115 bool "Ext3 POSIX Access Control Lists"
116 depends on EXT3_FS_XATTR
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700117 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118 help
119 Posix Access Control Lists (ACLs) support permissions for users and
120 groups beyond the owner/group/world scheme.
121
122 To learn more about Access Control Lists, visit the Posix ACLs for
123 Linux website <http://acl.bestbits.at/>.
124
125 If you don't know what Access Control Lists are, say N
126
127config EXT3_FS_SECURITY
128 bool "Ext3 Security Labels"
129 depends on EXT3_FS_XATTR
130 help
131 Security labels support alternative access control models
132 implemented by security modules like SELinux. This option
133 enables an extended attribute handler for file security
134 labels in the ext3 filesystem.
135
136 If you are not using a security module that requires using
137 extended attributes for file security labels, say N.
138
Mingming Cao02ea2102006-10-11 01:20:56 -0700139config EXT4DEV_FS
140 tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
141 depends on EXPERIMENTAL
Mingming Caodab291a2006-10-11 01:21:01 -0700142 select JBD2
143 help
Mingming Cao02ea2102006-10-11 01:20:56 -0700144 Ext4dev is a predecessor filesystem of the next generation
145 extended fs ext4, based on ext3 filesystem code. It will be
146 renamed ext4 fs later, once ext4dev is mature and stabilized.
147
Mingming Caodab291a2006-10-11 01:21:01 -0700148 Unlike the change from ext2 filesystem to ext3 filesystem,
149 the on-disk format of ext4dev is not the same as ext3 any more:
Mingming Cao02ea2102006-10-11 01:20:56 -0700150 it is based on extent maps and it supports 48-bit physical block
Mingming Caodab291a2006-10-11 01:21:01 -0700151 numbers. These combined on-disk format changes will allow
Mingming Cao02ea2102006-10-11 01:20:56 -0700152 ext4dev/ext4 to handle more than 16 TB filesystem volumes --
153 a hard limit that ext3 cannot overcome without changing the
Mingming Caodab291a2006-10-11 01:21:01 -0700154 on-disk format.
Mingming Cao02ea2102006-10-11 01:20:56 -0700155
156 Other than extent maps and 48-bit block numbers, ext4dev also is
Mingming Caodab291a2006-10-11 01:21:01 -0700157 likely to have other new features such as persistent preallocation,
Mingming Cao02ea2102006-10-11 01:20:56 -0700158 high resolution time stamps, and larger file support etc. These
Mingming Caodab291a2006-10-11 01:21:01 -0700159 features will be added to ext4dev gradually.
Mingming Cao02ea2102006-10-11 01:20:56 -0700160
161 To compile this file system support as a module, choose M here. The
Jan Engelhardtd23edbd2006-12-12 19:07:45 +0100162 module will be called ext4dev.
Mingming Cao02ea2102006-10-11 01:20:56 -0700163
164 If unsure, say N.
165
166config EXT4DEV_FS_XATTR
167 bool "Ext4dev extended attributes"
168 depends on EXT4DEV_FS
169 default y
170 help
171 Extended attributes are name:value pairs associated with inodes by
172 the kernel or by users (see the attr(5) manual page, or visit
173 <http://acl.bestbits.at/> for details).
174
175 If unsure, say N.
176
177 You need this for POSIX ACL support on ext4dev/ext4.
178
179config EXT4DEV_FS_POSIX_ACL
180 bool "Ext4dev POSIX Access Control Lists"
181 depends on EXT4DEV_FS_XATTR
182 select FS_POSIX_ACL
183 help
184 POSIX Access Control Lists (ACLs) support permissions for users and
185 groups beyond the owner/group/world scheme.
186
187 To learn more about Access Control Lists, visit the POSIX ACLs for
188 Linux website <http://acl.bestbits.at/>.
189
190 If you don't know what Access Control Lists are, say N
191
192config EXT4DEV_FS_SECURITY
193 bool "Ext4dev Security Labels"
194 depends on EXT4DEV_FS_XATTR
195 help
196 Security labels support alternative access control models
197 implemented by security modules like SELinux. This option
198 enables an extended attribute handler for file security
199 labels in the ext4dev/ext4 filesystem.
200
201 If you are not using a security module that requires using
202 extended attributes for file security labels, say N.
203
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204config JBD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205 tristate
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206 help
Matt LaPlantecc2e2762006-10-03 22:22:29 +0200207 This is a generic journalling layer for block devices. It is
Mark Fashehb4e40a52005-12-15 14:31:24 -0800208 currently used by the ext3 and OCFS2 file systems, but it could
209 also be used to add journal support to other file systems or block
210 devices such as RAID or LVM.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211
Mark Fashehb4e40a52005-12-15 14:31:24 -0800212 If you are using the ext3 or OCFS2 file systems, you need to
213 say Y here. If you are not using ext3 OCFS2 then you will probably
214 want to say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700215
216 To compile this device as a module, choose M here: the module will be
Mark Fashehb4e40a52005-12-15 14:31:24 -0800217 called jbd. If you are compiling ext3 or OCFS2 into the kernel,
218 you cannot compile this code as a module.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700219
220config JBD_DEBUG
221 bool "JBD (ext3) debugging support"
222 depends on JBD
223 help
224 If you are using the ext3 journaled file system (or potentially any
225 other file system/device using JBD), this option allows you to
226 enable debugging output while the system is running, in order to
227 help track down any problems you are having. By default the
228 debugging output will be turned off.
229
230 If you select Y here, then you will be able to turn on debugging
231 with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
232 1 and 5, the higher the number, the more debugging output is
233 generated. To turn debugging off again, do
234 "echo 0 > /proc/sys/fs/jbd-debug".
235
Mingming Caodab291a2006-10-11 01:21:01 -0700236config JBD2
237 tristate
238 help
239 This is a generic journaling layer for block devices that support
240 both 32-bit and 64-bit block numbers. It is currently used by
241 the ext4dev/ext4 filesystem, but it could also be used to add
242 journal support to other file systems or block devices such
243 as RAID or LVM.
244
245 If you are using ext4dev/ext4, you need to say Y here. If you are not
246 using ext4dev/ext4 then you will probably want to say N.
247
248 To compile this device as a module, choose M here. The module will be
249 called jbd2. If you are compiling ext4dev/ext4 into the kernel,
250 you cannot compile this code as a module.
251
252config JBD2_DEBUG
253 bool "JBD2 (ext4dev/ext4) debugging support"
254 depends on JBD2
255 help
256 If you are using the ext4dev/ext4 journaled file system (or
257 potentially any other filesystem/device using JBD2), this option
258 allows you to enable debugging output while the system is running,
259 in order to help track down any problems you are having.
260 By default, the debugging output will be turned off.
261
262 If you select Y here, then you will be able to turn on debugging
263 with "echo N > /proc/sys/fs/jbd2-debug", where N is a number between
264 1 and 5. The higher the number, the more debugging output is
265 generated. To turn debugging off again, do
266 "echo 0 > /proc/sys/fs/jbd2-debug".
267
Linus Torvalds1da177e2005-04-16 15:20:36 -0700268config FS_MBCACHE
Mingming Cao02ea2102006-10-11 01:20:56 -0700269# Meta block cache for Extended Attributes (ext2/ext3/ext4)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270 tristate
Mingming Cao02ea2102006-10-11 01:20:56 -0700271 depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
272 default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
273 default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274
275config REISERFS_FS
276 tristate "Reiserfs support"
277 help
278 Stores not just filenames but the files themselves in a balanced
Matt LaPlantecc2e2762006-10-03 22:22:29 +0200279 tree. Uses journalling.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280
281 Balanced trees are more efficient than traditional file system
282 architectural foundations.
283
284 In general, ReiserFS is as fast as ext2, but is very efficient with
285 large directories and small files. Additional patches are needed
286 for NFS and quotas, please see <http://www.namesys.com/> for links.
287
288 It is more easily extended to have features currently found in
289 database and keyword search systems than block allocation based file
290 systems are. The next version will be so extended, and will support
291 plugins consistent with our motto ``It takes more than a license to
292 make source code open.''
293
294 Read <http://www.namesys.com/> to learn more about reiserfs.
295
296 Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
297
298 If you like it, you can pay us to add new features to it that you
299 need, buy a support contract, or pay us to port it to another OS.
300
301config REISERFS_CHECK
302 bool "Enable reiserfs debug mode"
303 depends on REISERFS_FS
304 help
305 If you set this to Y, then ReiserFS will perform every check it can
306 possibly imagine of its internal consistency throughout its
307 operation. It will also go substantially slower. More than once we
308 have forgotten that this was on, and then gone despondent over the
309 latest benchmarks.:-) Use of this option allows our team to go all
310 out in checking for consistency when debugging without fear of its
311 effect on end users. If you are on the verge of sending in a bug
312 report, say Y and you might get a useful error message. Almost
313 everyone should say N.
314
315config REISERFS_PROC_INFO
316 bool "Stats in /proc/fs/reiserfs"
317 depends on REISERFS_FS
318 help
319 Create under /proc/fs/reiserfs a hierarchy of files, displaying
320 various ReiserFS statistics and internal data at the expense of
321 making your kernel or module slightly larger (+8 KB). This also
322 increases the amount of kernel memory required for each mount.
323 Almost everyone but ReiserFS developers and people fine-tuning
324 reiserfs or tracing problems should say N.
325
326config REISERFS_FS_XATTR
327 bool "ReiserFS extended attributes"
328 depends on REISERFS_FS
329 help
330 Extended attributes are name:value pairs associated with inodes by
331 the kernel or by users (see the attr(5) manual page, or visit
332 <http://acl.bestbits.at/> for details).
333
334 If unsure, say N.
335
336config REISERFS_FS_POSIX_ACL
337 bool "ReiserFS POSIX Access Control Lists"
338 depends on REISERFS_FS_XATTR
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700339 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700340 help
341 Posix Access Control Lists (ACLs) support permissions for users and
342 groups beyond the owner/group/world scheme.
343
344 To learn more about Access Control Lists, visit the Posix ACLs for
345 Linux website <http://acl.bestbits.at/>.
346
347 If you don't know what Access Control Lists are, say N
348
349config REISERFS_FS_SECURITY
350 bool "ReiserFS Security Labels"
351 depends on REISERFS_FS_XATTR
352 help
353 Security labels support alternative access control models
354 implemented by security modules like SELinux. This option
355 enables an extended attribute handler for file security
356 labels in the ReiserFS filesystem.
357
358 If you are not using a security module that requires using
359 extended attributes for file security labels, say N.
360
361config JFS_FS
362 tristate "JFS filesystem support"
363 select NLS
364 help
365 This is a port of IBM's Journaled Filesystem . More information is
366 available in the file <file:Documentation/filesystems/jfs.txt>.
367
368 If you do not intend to use the JFS filesystem, say N.
369
370config JFS_POSIX_ACL
371 bool "JFS POSIX Access Control Lists"
372 depends on JFS_FS
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700373 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374 help
375 Posix Access Control Lists (ACLs) support permissions for users and
376 groups beyond the owner/group/world scheme.
377
378 To learn more about Access Control Lists, visit the Posix ACLs for
379 Linux website <http://acl.bestbits.at/>.
380
381 If you don't know what Access Control Lists are, say N
382
383config JFS_SECURITY
384 bool "JFS Security Labels"
385 depends on JFS_FS
386 help
387 Security labels support alternative access control models
388 implemented by security modules like SELinux. This option
389 enables an extended attribute handler for file security
390 labels in the jfs filesystem.
391
392 If you are not using a security module that requires using
393 extended attributes for file security labels, say N.
394
395config JFS_DEBUG
396 bool "JFS debugging"
397 depends on JFS_FS
398 help
399 If you are experiencing any problems with the JFS filesystem, say
400 Y here. This will result in additional debugging messages to be
401 written to the system log. Under normal circumstances, this
402 results in very little overhead.
403
404config JFS_STATISTICS
405 bool "JFS statistics"
406 depends on JFS_FS
407 help
408 Enabling this option will cause statistics from the JFS file system
409 to be made available to the user in the /proc/fs/jfs/ directory.
410
411config FS_POSIX_ACL
412# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs)
413#
414# NOTE: you can implement Posix ACLs without these helpers (XFS does).
415# Never use this symbol for ifdefs.
416#
417 bool
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700418 default n
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419
420source "fs/xfs/Kconfig"
David Teiglandf7825dc2006-01-16 16:43:37 +0000421source "fs/gfs2/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422
Mark Fashehb4e40a52005-12-15 14:31:24 -0800423config OCFS2_FS
Mark Fasheh02ed8412006-09-14 10:28:06 -0700424 tristate "OCFS2 file system support"
425 depends on NET && SYSFS
Mark Fashehb4e40a52005-12-15 14:31:24 -0800426 select CONFIGFS_FS
427 select JBD
428 select CRC32
Mark Fashehb4e40a52005-12-15 14:31:24 -0800429 help
430 OCFS2 is a general purpose extent based shared disk cluster file
431 system with many similarities to ext3. It supports 64 bit inode
432 numbers, and has automatically extending metadata groups which may
433 also make it attractive for non-clustered use.
434
435 You'll want to install the ocfs2-tools package in order to at least
436 get "mount.ocfs2".
437
438 Project web page: http://oss.oracle.com/projects/ocfs2
439 Tools web page: http://oss.oracle.com/projects/ocfs2-tools
440 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
441
442 Note: Features which OCFS2 does not support yet:
443 - extended attributes
Mark Fashehb4e40a52005-12-15 14:31:24 -0800444 - shared writeable mmap
445 - loopback is supported, but data written will not
446 be cluster coherent.
447 - quotas
448 - cluster aware flock
449 - Directory change notification (F_NOTIFY)
450 - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
451 - POSIX ACLs
452 - readpages / writepages (not user visible)
453
Joel Becker2b388c62006-05-10 18:28:59 -0700454config OCFS2_DEBUG_MASKLOG
455 bool "OCFS2 logging support"
456 depends on OCFS2_FS
457 default y
458 help
459 The ocfs2 filesystem has an extensive logging system. The system
460 allows selection of events to log via files in /sys/o2cb/logmask/.
461 This option will enlarge your kernel, but it allows debugging of
462 ocfs2 filesystem issues.
463
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464config MINIX_FS
465 tristate "Minix fs support"
466 help
467 Minix is a simple operating system used in many classes about OS's.
468 The minix file system (method to organize files on a hard disk
469 partition or a floppy disk) was the original file system for Linux,
470 but has been superseded by the second extended file system ext2fs.
471 You don't want to use the minix file system on your hard disk
472 because of certain built-in restrictions, but it is sometimes found
473 on older Linux floppy disks. This option will enlarge your kernel
474 by about 28 KB. If unsure, say N.
475
476 To compile this file system support as a module, choose M here: the
477 module will be called minix. Note that the file system of your root
478 partition (the one containing the directory /) cannot be compiled as
479 a module.
480
481config ROMFS_FS
482 tristate "ROM file system support"
483 ---help---
484 This is a very small read-only file system mainly intended for
485 initial ram disks of installation disks, but it could be used for
486 other read-only media as well. Read
487 <file:Documentation/filesystems/romfs.txt> for details.
488
489 To compile this file system support as a module, choose M here: the
490 module will be called romfs. Note that the file system of your
491 root partition (the one containing the directory /) cannot be a
492 module.
493
494 If you don't know whether you need it, then you don't need it:
495 answer N.
496
David Howells93614012006-09-30 20:45:40 +0200497endif
498
Robert Love0eeca282005-07-12 17:06:03 -0400499config INOTIFY
500 bool "Inotify file change notification support"
501 default y
502 ---help---
Amy Griffis2d9048e2006-06-01 13:10:59 -0700503 Say Y here to enable inotify support. Inotify is a file change
504 notification system and a replacement for dnotify. Inotify fixes
505 numerous shortcomings in dnotify and introduces several new features
506 including multiple file events, one-shot support, and unmount
Robert Love3de11742005-08-04 13:07:08 -0700507 notification.
508
509 For more information, see Documentation/filesystems/inotify.txt
Robert Love0eeca282005-07-12 17:06:03 -0400510
511 If unsure, say Y.
512
Amy Griffis2d9048e2006-06-01 13:10:59 -0700513config INOTIFY_USER
514 bool "Inotify support for userspace"
515 depends on INOTIFY
516 default y
517 ---help---
518 Say Y here to enable inotify support for userspace, including the
519 associated system calls. Inotify allows monitoring of both files and
520 directories via a single open fd. Events are read from the file
521 descriptor, which is also select()- and poll()-able.
522
523 For more information, see Documentation/filesystems/inotify.txt
524
525 If unsure, say Y.
526
Linus Torvalds1da177e2005-04-16 15:20:36 -0700527config QUOTA
528 bool "Quota support"
529 help
530 If you say Y here, you will be able to set per user limits for disk
531 usage (also called disk quotas). Currently, it works for the
532 ext2, ext3, and reiserfs file system. ext3 also supports journalled
533 quotas for which you don't need to run quotacheck(8) after an unclean
Adrian Bunk919532a2005-09-06 15:17:22 -0700534 shutdown.
535 For further details, read the Quota mini-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -0700536 <http://www.tldp.org/docs.html#howto>, or the documentation provided
537 with the quota tools. Probably the quota support is only useful for
538 multi user systems. If unsure, say N.
539
540config QFMT_V1
541 tristate "Old quota format support"
542 depends on QUOTA
543 help
544 This quota format was (is) used by kernels earlier than 2.4.22. If
545 you have quota working and you don't want to convert to new quota
546 format say Y here.
547
548config QFMT_V2
549 tristate "Quota format v2 support"
550 depends on QUOTA
551 help
552 This quota format allows using quotas with 32-bit UIDs/GIDs. If you
Adrian Bunk919532a2005-09-06 15:17:22 -0700553 need this functionality say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554
555config QUOTACTL
556 bool
557 depends on XFS_QUOTA || QUOTA
558 default y
559
560config DNOTIFY
561 bool "Dnotify support" if EMBEDDED
562 default y
563 help
564 Dnotify is a directory-based per-fd file change notification system
565 that uses signals to communicate events to user-space. There exist
566 superior alternatives, but some applications may still rely on
567 dnotify.
568
569 Because of this, if unsure, say Y.
570
571config AUTOFS_FS
572 tristate "Kernel automounter support"
573 help
574 The automounter is a tool to automatically mount remote file systems
575 on demand. This implementation is partially kernel-based to reduce
576 overhead in the already-mounted case; this is unlike the BSD
577 automounter (amd), which is a pure user space daemon.
578
579 To use the automounter you need the user-space tools from the autofs
580 package; you can find the location in <file:Documentation/Changes>.
581 You also want to answer Y to "NFS file system support", below.
582
583 If you want to use the newer version of the automounter with more
584 features, say N here and say Y to "Kernel automounter v4 support",
585 below.
586
587 To compile this support as a module, choose M here: the module will be
588 called autofs.
589
590 If you are not a part of a fairly large, distributed network, you
591 probably do not need an automounter, and can say N here.
592
593config AUTOFS4_FS
594 tristate "Kernel automounter version 4 support (also supports v3)"
595 help
596 The automounter is a tool to automatically mount remote file systems
597 on demand. This implementation is partially kernel-based to reduce
598 overhead in the already-mounted case; this is unlike the BSD
599 automounter (amd), which is a pure user space daemon.
600
601 To use the automounter you need the user-space tools from
602 <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
603 want to answer Y to "NFS file system support", below.
604
605 To compile this support as a module, choose M here: the module will be
606 called autofs4. You will need to add "alias autofs autofs4" to your
607 modules configuration file.
608
609 If you are not a part of a fairly large, distributed network or
610 don't have a laptop which needs to dynamically reconfigure to the
611 local network, you probably do not need an automounter, and can say
612 N here.
613
Miklos Szeredi04578f12005-09-09 13:10:22 -0700614config FUSE_FS
615 tristate "Filesystem in Userspace support"
616 help
617 With FUSE it is possible to implement a fully functional filesystem
618 in a userspace program.
619
620 There's also companion library: libfuse. This library along with
621 utilities is available from the FUSE homepage:
622 <http://fuse.sourceforge.net/>
623
Miklos Szeredi909021e2005-09-27 21:45:20 -0700624 See <file:Documentation/filesystems/fuse.txt> for more information.
625 See <file:Documentation/Changes> for needed library/utility version.
626
Miklos Szeredi04578f12005-09-09 13:10:22 -0700627 If you want to develop a userspace FS, or if you want to use
628 a filesystem based on FUSE, answer Y or M.
629
Randy Dunlapf2fbc6c2006-10-19 23:28:35 -0700630config GENERIC_ACL
631 bool
632 select FS_POSIX_ACL
633
David Howells93614012006-09-30 20:45:40 +0200634if BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700635menu "CD-ROM/DVD Filesystems"
636
637config ISO9660_FS
638 tristate "ISO 9660 CDROM file system support"
639 help
640 This is the standard file system used on CD-ROMs. It was previously
641 known as "High Sierra File System" and is called "hsfs" on other
642 Unix systems. The so-called Rock-Ridge extensions which allow for
643 long Unix filenames and symbolic links are also supported by this
644 driver. If you have a CD-ROM drive and want to do more with it than
645 just listen to audio CDs and watch its LEDs, say Y (and read
646 <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
647 available from <http://www.tldp.org/docs.html#howto>), thereby
648 enlarging your kernel by about 27 KB; otherwise say N.
649
650 To compile this file system support as a module, choose M here: the
651 module will be called isofs.
652
653config JOLIET
654 bool "Microsoft Joliet CDROM extensions"
655 depends on ISO9660_FS
656 select NLS
657 help
658 Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
659 which allows for long filenames in unicode format (unicode is the
660 new 16 bit character code, successor to ASCII, which encodes the
661 characters of almost all languages of the world; see
662 <http://www.unicode.org/> for more information). Say Y here if you
663 want to be able to read Joliet CD-ROMs under Linux.
664
665config ZISOFS
666 bool "Transparent decompression extension"
667 depends on ISO9660_FS
668 select ZLIB_INFLATE
669 help
670 This is a Linux-specific extension to RockRidge which lets you store
671 data in compressed form on a CD-ROM and have it transparently
672 decompressed when the CD-ROM is accessed. See
673 <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
674 necessary to create such a filesystem. Say Y here if you want to be
675 able to read such compressed CD-ROMs.
676
Linus Torvalds1da177e2005-04-16 15:20:36 -0700677config UDF_FS
678 tristate "UDF file system support"
679 help
680 This is the new file system used on some CD-ROMs and DVDs. Say Y if
681 you intend to mount DVD discs or CDRW's written in packet mode, or
682 if written to by other UDF utilities, such as DirectCD.
683 Please read <file:Documentation/filesystems/udf.txt>.
684
685 To compile this file system support as a module, choose M here: the
686 module will be called udf.
687
688 If unsure, say N.
689
690config UDF_NLS
691 bool
692 default y
693 depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
694
695endmenu
David Howells93614012006-09-30 20:45:40 +0200696endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697
David Howells93614012006-09-30 20:45:40 +0200698if BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699menu "DOS/FAT/NT Filesystems"
700
701config FAT_FS
702 tristate
703 select NLS
704 help
705 If you want to use one of the FAT-based file systems (the MS-DOS and
706 VFAT (Windows 95) file systems), then you must say Y or M here
707 to include FAT support. You will then be able to mount partitions or
708 diskettes with FAT-based file systems and transparently access the
709 files on them, i.e. MSDOS files will look and behave just like all
710 other Unix files.
711
712 This FAT support is not a file system in itself, it only provides
713 the foundation for the other file systems. You will have to say Y or
714 M to at least one of "MSDOS fs support" or "VFAT fs support" in
715 order to make use of it.
716
717 Another way to read and write MSDOS floppies and hard drive
718 partitions from within Linux (but not transparently) is with the
719 mtools ("man mtools") program suite. You don't need to say Y here in
720 order to do that.
721
722 If you need to move large files on floppies between a DOS and a
723 Linux box, say Y here, mount the floppy under Linux with an MSDOS
724 file system and use GNU tar's M option. GNU tar is a program
725 available for Unix and DOS ("man tar" or "info tar").
726
727 It is now also becoming possible to read and write compressed FAT
728 file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
729 details.
730
731 The FAT support will enlarge your kernel by about 37 KB. If unsure,
732 say Y.
733
734 To compile this as a module, choose M here: the module will be called
735 fat. Note that if you compile the FAT support as a module, you
736 cannot compile any of the FAT-based file systems into the kernel
737 -- they will have to be modules as well.
738
739config MSDOS_FS
740 tristate "MSDOS fs support"
741 select FAT_FS
742 help
743 This allows you to mount MSDOS partitions of your hard drive (unless
744 they are compressed; to access compressed MSDOS partitions under
745 Linux, you can either use the DOS emulator DOSEMU, described in the
746 DOSEMU-HOWTO, available from
747 <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
748 <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
749 intend to use dosemu with a non-compressed MSDOS partition, say Y
750 here) and MSDOS floppies. This means that file access becomes
751 transparent, i.e. the MSDOS files look and behave just like all
752 other Unix files.
753
754 If you have Windows 95 or Windows NT installed on your MSDOS
755 partitions, you should use the VFAT file system (say Y to "VFAT fs
756 support" below), or you will not be able to see the long filenames
757 generated by Windows 95 / Windows NT.
758
759 This option will enlarge your kernel by about 7 KB. If unsure,
760 answer Y. This will only work if you said Y to "DOS FAT fs support"
761 as well. To compile this as a module, choose M here: the module will
762 be called msdos.
763
764config VFAT_FS
765 tristate "VFAT (Windows-95) fs support"
766 select FAT_FS
767 help
768 This option provides support for normal Windows file systems with
769 long filenames. That includes non-compressed FAT-based file systems
770 used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
771 programs from the mtools package.
772
773 The VFAT support enlarges your kernel by about 10 KB and it only
774 works if you said Y to the "DOS FAT fs support" above. Please read
775 the file <file:Documentation/filesystems/vfat.txt> for details. If
776 unsure, say Y.
777
778 To compile this as a module, choose M here: the module will be called
779 vfat.
780
781config FAT_DEFAULT_CODEPAGE
782 int "Default codepage for FAT"
783 depends on MSDOS_FS || VFAT_FS
784 default 437
785 help
786 This option should be set to the codepage of your FAT filesystems.
787 It can be overridden with the "codepage" mount option.
788 See <file:Documentation/filesystems/vfat.txt> for more information.
789
790config FAT_DEFAULT_IOCHARSET
791 string "Default iocharset for FAT"
792 depends on VFAT_FS
793 default "iso8859-1"
794 help
795 Set this to the default input/output character set you'd
796 like FAT to use. It should probably match the character set
797 that most of your FAT filesystems use, and can be overridden
798 with the "iocharset" mount option for FAT filesystems.
799 Note that "utf8" is not recommended for FAT filesystems.
800 If unsure, you shouldn't set "utf8" here.
801 See <file:Documentation/filesystems/vfat.txt> for more information.
802
803config NTFS_FS
804 tristate "NTFS file system support"
805 select NLS
806 help
807 NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
808
809 Saying Y or M here enables read support. There is partial, but
810 safe, write support available. For write support you must also
811 say Y to "NTFS write support" below.
812
813 There are also a number of user-space tools available, called
814 ntfsprogs. These include ntfsundelete and ntfsresize, that work
815 without NTFS support enabled in the kernel.
816
817 This is a rewrite from scratch of Linux NTFS support and replaced
818 the old NTFS code starting with Linux 2.5.11. A backport to
819 the Linux 2.4 kernel series is separately available as a patch
820 from the project web site.
821
822 For more information see <file:Documentation/filesystems/ntfs.txt>
823 and <http://linux-ntfs.sourceforge.net/>.
824
825 To compile this file system support as a module, choose M here: the
826 module will be called ntfs.
827
828 If you are not using Windows NT, 2000, XP or 2003 in addition to
829 Linux on your computer it is safe to say N.
830
831config NTFS_DEBUG
832 bool "NTFS debugging support"
833 depends on NTFS_FS
834 help
835 If you are experiencing any problems with the NTFS file system, say
836 Y here. This will result in additional consistency checks to be
837 performed by the driver as well as additional debugging messages to
838 be written to the system log. Note that debugging messages are
839 disabled by default. To enable them, supply the option debug_msgs=1
840 at the kernel command line when booting the kernel or as an option
841 to insmod when loading the ntfs module. Once the driver is active,
842 you can enable debugging messages by doing (as root):
843 echo 1 > /proc/sys/fs/ntfs-debug
844 Replacing the "1" with "0" would disable debug messages.
845
846 If you leave debugging messages disabled, this results in little
847 overhead, but enabling debug messages results in very significant
848 slowdown of the system.
849
850 When reporting bugs, please try to have available a full dump of
851 debugging messages while the misbehaviour was occurring.
852
853config NTFS_RW
854 bool "NTFS write support"
855 depends on NTFS_FS
856 help
857 This enables the partial, but safe, write support in the NTFS driver.
858
859 The only supported operation is overwriting existing files, without
860 changing the file length. No file or directory creation, deletion or
861 renaming is possible. Note only non-resident files can be written to
862 so you may find that some very small files (<500 bytes or so) cannot
863 be written to.
864
865 While we cannot guarantee that it will not damage any data, we have
866 so far not received a single report where the driver would have
867 damaged someones data so we assume it is perfectly safe to use.
868
869 Note: While write support is safe in this version (a rewrite from
870 scratch of the NTFS support), it should be noted that the old NTFS
871 write support, included in Linux 2.5.10 and before (since 1997),
872 is not safe.
873
874 This is currently useful with TopologiLinux. TopologiLinux is run
875 on top of any DOS/Microsoft Windows system without partitioning your
876 hard disk. Unlike other Linux distributions TopologiLinux does not
877 need its own partition. For more information see
878 <http://topologi-linux.sourceforge.net/>
879
880 It is perfectly safe to say N here.
881
882endmenu
David Howells93614012006-09-30 20:45:40 +0200883endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700884
885menu "Pseudo filesystems"
886
887config PROC_FS
H. Peter Anvin69755652006-06-25 05:48:08 -0700888 bool "/proc file system support" if EMBEDDED
889 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890 help
891 This is a virtual file system providing information about the status
892 of the system. "Virtual" means that it doesn't take up any space on
893 your hard disk: the files are created on the fly by the kernel when
894 you try to access them. Also, you cannot read the files with older
895 version of the program less: you need to use more or cat.
896
897 It's totally cool; for example, "cat /proc/interrupts" gives
898 information about what the different IRQs are used for at the moment
899 (there is a small number of Interrupt ReQuest lines in your computer
900 that are used by the attached devices to gain the CPU's attention --
901 often a source of trouble if two devices are mistakenly configured
902 to use the same IRQ). The program procinfo to display some
903 information about your system gathered from the /proc file system.
904
905 Before you can use the /proc file system, it has to be mounted,
906 meaning it has to be given a location in the directory hierarchy.
907 That location should be /proc. A command such as "mount -t proc proc
908 /proc" or the equivalent line in /etc/fstab does the job.
909
910 The /proc file system is explained in the file
911 <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
912 ("man 5 proc").
913
914 This option will enlarge your kernel by about 67 KB. Several
915 programs depend on this, so everyone should say Y here.
916
917config PROC_KCORE
918 bool "/proc/kcore support" if !ARM
919 depends on PROC_FS && MMU
920
Vivek Goyal666bfdd2005-06-25 14:58:21 -0700921config PROC_VMCORE
922 bool "/proc/vmcore support (EXPERIMENTAL)"
Maneesh Soni05970d42006-01-09 20:51:52 -0800923 depends on PROC_FS && EXPERIMENTAL && CRASH_DUMP
Vivek Goyal68250ba2006-04-10 22:54:30 -0700924 default y
Vivek Goyal666bfdd2005-06-25 14:58:21 -0700925 help
926 Exports the dump image of crashed kernel in ELF format.
927
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700928config PROC_SYSCTL
929 bool "Sysctl support (/proc/sys)" if EMBEDDED
930 depends on PROC_FS
931 select SYSCTL
932 default y
933 ---help---
934 The sysctl interface provides a means of dynamically changing
935 certain kernel parameters and variables on the fly without requiring
936 a recompile of the kernel or reboot of the system. The primary
937 interface is through /proc/sys. If you say Y here a tree of
938 modifiable sysctl entries will be generated beneath the
939 /proc/sys directory. They are explained in the files
940 in <file:Documentation/sysctl/>. Note that enabling this
941 option will enlarge the kernel by at least 8 KB.
942
943 As it is generally a good thing, you should say Y here unless
944 building a kernel for install/rescue disks or your system is very
945 limited in memory.
946
Linus Torvalds1da177e2005-04-16 15:20:36 -0700947config SYSFS
948 bool "sysfs file system support" if EMBEDDED
949 default y
950 help
951 The sysfs filesystem is a virtual filesystem that the kernel uses to
952 export internal kernel objects, their attributes, and their
953 relationships to one another.
954
955 Users can use sysfs to ascertain useful information about the running
956 kernel, such as the devices the kernel has discovered on each bus and
957 which driver each is bound to. sysfs can also be used to tune devices
958 and other kernel subsystems.
959
960 Some system agents rely on the information in sysfs to operate.
961 /sbin/hotplug uses device and object attributes in sysfs to assist in
Jan Engelhardt03a67a42006-11-30 05:32:19 +0100962 delegating policy decisions, like persistently naming devices.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700963
964 sysfs is currently used by the block subsystem to mount the root
965 partition. If sysfs is disabled you must specify the boot device on
966 the kernel boot command line via its major and minor numbers. For
967 example, "root=03:01" for /dev/hda1.
968
969 Designers of embedded systems may wish to say N here to conserve space.
970
Linus Torvalds1da177e2005-04-16 15:20:36 -0700971config TMPFS
972 bool "Virtual memory file system support (former shm fs)"
973 help
974 Tmpfs is a file system which keeps all files in virtual memory.
975
976 Everything in tmpfs is temporary in the sense that no files will be
977 created on your hard drive. The files live in memory and swap
978 space. If you unmount a tmpfs instance, everything stored therein is
979 lost.
980
981 See <file:Documentation/filesystems/tmpfs.txt> for details.
982
Andreas Gruenbacher39f02472006-09-29 02:01:35 -0700983config TMPFS_POSIX_ACL
984 bool "Tmpfs POSIX Access Control Lists"
985 depends on TMPFS
986 select GENERIC_ACL
987 help
988 POSIX Access Control Lists (ACLs) support permissions for users and
989 groups beyond the owner/group/world scheme.
990
991 To learn more about Access Control Lists, visit the POSIX ACLs for
992 Linux website <http://acl.bestbits.at/>.
993
994 If you don't know what Access Control Lists are, say N.
995
Linus Torvalds1da177e2005-04-16 15:20:36 -0700996config HUGETLBFS
997 bool "HugeTLB file system support"
Robert P. J. Daybef1f402006-12-12 20:04:19 +0100998 depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
Arthur Othienodda27d12006-04-18 22:20:57 -0700999 help
1000 hugetlbfs is a filesystem backing for HugeTLB pages, based on
1001 ramfs. For architectures that support it, say Y here and read
1002 <file:Documentation/vm/hugetlbpage.txt> for details.
1003
1004 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001005
1006config HUGETLB_PAGE
1007 def_bool HUGETLBFS
1008
1009config RAMFS
1010 bool
1011 default y
1012 ---help---
1013 Ramfs is a file system which keeps all files in RAM. It allows
1014 read and write access.
1015
1016 It is more of an programming example than a useable file system. If
1017 you need a file system which lives in RAM with limit checking use
1018 tmpfs.
1019
1020 To compile this as a module, choose M here: the module will be called
1021 ramfs.
1022
Joel Becker7063fbf2005-12-15 14:29:43 -08001023config CONFIGFS_FS
1024 tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
Adrian Bunk65714b92006-03-26 14:25:52 +02001025 depends on SYSFS && EXPERIMENTAL
Joel Becker7063fbf2005-12-15 14:29:43 -08001026 help
1027 configfs is a ram-based filesystem that provides the converse
1028 of sysfs's functionality. Where sysfs is a filesystem-based
1029 view of kernel objects, configfs is a filesystem-based manager
1030 of kernel objects, or config_items.
1031
1032 Both sysfs and configfs can and should exist together on the
1033 same system. One is not a replacement for the other.
1034
Linus Torvalds1da177e2005-04-16 15:20:36 -07001035endmenu
1036
1037menu "Miscellaneous filesystems"
1038
1039config ADFS_FS
1040 tristate "ADFS file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001041 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001042 help
1043 The Acorn Disc Filing System is the standard file system of the
1044 RiscOS operating system which runs on Acorn's ARM-based Risc PC
1045 systems and the Acorn Archimedes range of machines. If you say Y
1046 here, Linux will be able to read from ADFS partitions on hard drives
1047 and from ADFS-formatted floppy discs. If you also want to be able to
1048 write to those devices, say Y to "ADFS write support" below.
1049
1050 The ADFS partition should be the first partition (i.e.,
1051 /dev/[hs]d?1) on each of your drives. Please read the file
1052 <file:Documentation/filesystems/adfs.txt> for further details.
1053
1054 To compile this code as a module, choose M here: the module will be
1055 called adfs.
1056
1057 If unsure, say N.
1058
1059config ADFS_FS_RW
1060 bool "ADFS write support (DANGEROUS)"
1061 depends on ADFS_FS
1062 help
1063 If you say Y here, you will be able to write to ADFS partitions on
1064 hard drives and ADFS-formatted floppy disks. This is experimental
1065 codes, so if you're unsure, say N.
1066
1067config AFFS_FS
1068 tristate "Amiga FFS file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001069 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070 help
1071 The Fast File System (FFS) is the common file system used on hard
1072 disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
1073 if you want to be able to read and write files from and to an Amiga
1074 FFS partition on your hard drive. Amiga floppies however cannot be
1075 read with this driver due to an incompatibility of the floppy
1076 controller used in an Amiga and the standard floppy controller in
1077 PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
1078 and <file:fs/affs/Changes>.
1079
1080 With this driver you can also mount disk files used by Bernd
1081 Schmidt's Un*X Amiga Emulator
1082 (<http://www.freiburg.linux.de/~uae/>).
1083 If you want to do this, you will also need to say Y or M to "Loop
1084 device support", above.
1085
1086 To compile this file system support as a module, choose M here: the
1087 module will be called affs. If unsure, say N.
1088
Michael Halcrow237fead2006-10-04 02:16:22 -07001089config ECRYPT_FS
1090 tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
Michael Halcrow88b4a072007-02-12 00:53:43 -08001091 depends on EXPERIMENTAL && KEYS && CRYPTO && NET
Michael Halcrow237fead2006-10-04 02:16:22 -07001092 help
1093 Encrypted filesystem that operates on the VFS layer. See
1094 <file:Documentation/ecryptfs.txt> to learn more about
1095 eCryptfs. Userspace components are required and can be
1096 obtained from <http://ecryptfs.sf.net>.
1097
1098 To compile this file system support as a module, choose M here: the
1099 module will be called ecryptfs.
1100
Linus Torvalds1da177e2005-04-16 15:20:36 -07001101config HFS_FS
1102 tristate "Apple Macintosh file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001103 depends on BLOCK && EXPERIMENTAL
Lennert Buytenhek878129a2005-11-07 00:59:18 -08001104 select NLS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001105 help
1106 If you say Y here, you will be able to mount Macintosh-formatted
1107 floppy disks and hard drive partitions with full read-write access.
1108 Please read <file:fs/hfs/HFS.txt> to learn about the available mount
1109 options.
1110
1111 To compile this file system support as a module, choose M here: the
1112 module will be called hfs.
1113
1114config HFSPLUS_FS
1115 tristate "Apple Extended HFS file system support"
David Howells93614012006-09-30 20:45:40 +02001116 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001117 select NLS
1118 select NLS_UTF8
1119 help
1120 If you say Y here, you will be able to mount extended format
1121 Macintosh-formatted hard drive partitions with full read-write access.
1122
1123 This file system is often called HFS+ and was introduced with
1124 MacOS 8. It includes all Mac specific filesystem data such as
1125 data forks and creator codes, but it also has several UNIX
1126 style features such as file ownership and permissions.
1127
1128config BEFS_FS
1129 tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001130 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 select NLS
1132 help
1133 The BeOS File System (BeFS) is the native file system of Be, Inc's
1134 BeOS. Notable features include support for arbitrary attributes
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +01001135 on files and directories, and database-like indices on selected
Linus Torvalds1da177e2005-04-16 15:20:36 -07001136 attributes. (Also note that this driver doesn't make those features
1137 available at this time). It is a 64 bit filesystem, so it supports
Matt LaPlante44c09202006-10-03 22:34:14 +02001138 extremely large volumes and files.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139
1140 If you use this filesystem, you should also say Y to at least one
1141 of the NLS (native language support) options below.
1142
1143 If you don't know what this is about, say N.
1144
1145 To compile this as a module, choose M here: the module will be
1146 called befs.
1147
1148config BEFS_DEBUG
1149 bool "Debug BeFS"
1150 depends on BEFS_FS
1151 help
1152 If you say Y here, you can use the 'debug' mount option to enable
1153 debugging output from the driver.
1154
1155config BFS_FS
1156 tristate "BFS file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001157 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 help
1159 Boot File System (BFS) is a file system used under SCO UnixWare to
1160 allow the bootloader access to the kernel image and other important
1161 files during the boot process. It is usually mounted under /stand
1162 and corresponds to the slice marked as "STAND" in the UnixWare
1163 partition. You should say Y if you want to read or write the files
1164 on your /stand slice from within Linux. You then also need to say Y
1165 to "UnixWare slices support", below. More information about the BFS
1166 file system is contained in the file
1167 <file:Documentation/filesystems/bfs.txt>.
1168
1169 If you don't know what this is about, say N.
1170
1171 To compile this as a module, choose M here: the module will be called
1172 bfs. Note that the file system of your root partition (the one
1173 containing the directory /) cannot be compiled as a module.
1174
1175
1176
1177config EFS_FS
1178 tristate "EFS file system support (read only) (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001179 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001180 help
1181 EFS is an older file system used for non-ISO9660 CD-ROMs and hard
1182 disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
1183 uses the XFS file system for hard disk partitions however).
1184
1185 This implementation only offers read-only access. If you don't know
1186 what all this is about, it's safe to say N. For more information
1187 about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
1188
1189 To compile the EFS file system support as a module, choose M here: the
1190 module will be called efs.
1191
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192config JFFS2_FS
1193 tristate "Journalling Flash File System v2 (JFFS2) support"
1194 select CRC32
1195 depends on MTD
1196 help
1197 JFFS2 is the second generation of the Journalling Flash File System
1198 for use on diskless embedded devices. It provides improved wear
1199 levelling, compression and support for hard links. You cannot use
1200 this on normal block devices, only on 'MTD' devices.
1201
1202 Further information on the design and implementation of JFFS2 is
1203 available at <http://sources.redhat.com/jffs2/>.
1204
1205config JFFS2_FS_DEBUG
1206 int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
1207 depends on JFFS2_FS
1208 default "0"
1209 help
1210 This controls the amount of debugging messages produced by the JFFS2
1211 code. Set it to zero for use in production systems. For evaluation,
1212 testing and debugging, it's advisable to set it to one. This will
1213 enable a few assertions and will print debugging messages at the
1214 KERN_DEBUG loglevel, where they won't normally be visible. Level 2
1215 is unlikely to be useful - it enables extra debugging in certain
1216 areas which at one point needed debugging, but when the bugs were
1217 located and fixed, the detailed messages were relegated to level 2.
1218
1219 If reporting bugs, please try to have available a full dump of the
1220 messages at debug level 1 while the misbehaviour was occurring.
1221
David Woodhouse2ba72cb2006-06-18 10:22:40 +01001222config JFFS2_FS_WRITEBUFFER
1223 bool "JFFS2 write-buffering support"
KaiGai Koheiaa98d7c2006-05-13 15:09:47 +09001224 depends on JFFS2_FS
David Woodhouse2ba72cb2006-06-18 10:22:40 +01001225 default y
1226 help
1227 This enables the write-buffering support in JFFS2.
1228
1229 This functionality is required to support JFFS2 on the following
1230 types of flash devices:
1231 - NAND flash
1232 - NOR flash with transparent ECC
1233 - DataFlash
1234
1235config JFFS2_SUMMARY
1236 bool "JFFS2 summary support (EXPERIMENTAL)"
1237 depends on JFFS2_FS && EXPERIMENTAL
1238 default n
1239 help
1240 This feature makes it possible to use summary information
1241 for faster filesystem mount.
1242
1243 The summary information can be inserted into a filesystem image
1244 by the utility 'sumtool'.
1245
1246 If unsure, say 'N'.
1247
1248config JFFS2_FS_XATTR
1249 bool "JFFS2 XATTR support (EXPERIMENTAL)"
KaiGai Kohei04510de2006-06-24 09:21:13 +09001250 depends on JFFS2_FS && EXPERIMENTAL
KaiGai Koheiaa98d7c2006-05-13 15:09:47 +09001251 default n
1252 help
1253 Extended attributes are name:value pairs associated with inodes by
1254 the kernel or by users (see the attr(5) manual page, or visit
1255 <http://acl.bestbits.at/> for details).
1256
1257 If unsure, say N.
1258
1259config JFFS2_FS_POSIX_ACL
1260 bool "JFFS2 POSIX Access Control Lists"
1261 depends on JFFS2_FS_XATTR
1262 default y
1263 select FS_POSIX_ACL
1264 help
1265 Posix Access Control Lists (ACLs) support permissions for users and
1266 groups beyond the owner/group/world scheme.
1267
1268 To learn more about Access Control Lists, visit the Posix ACLs for
1269 Linux website <http://acl.bestbits.at/>.
1270
1271 If you don't know what Access Control Lists are, say N
1272
1273config JFFS2_FS_SECURITY
1274 bool "JFFS2 Security Labels"
1275 depends on JFFS2_FS_XATTR
1276 default y
1277 help
1278 Security labels support alternative access control models
1279 implemented by security modules like SELinux. This option
1280 enables an extended attribute handler for file security
1281 labels in the jffs2 filesystem.
1282
1283 If you are not using a security module that requires using
1284 extended attributes for file security labels, say N.
1285
Linus Torvalds1da177e2005-04-16 15:20:36 -07001286config JFFS2_COMPRESSION_OPTIONS
1287 bool "Advanced compression options for JFFS2"
1288 depends on JFFS2_FS
1289 default n
1290 help
1291 Enabling this option allows you to explicitly choose which
1292 compression modules, if any, are enabled in JFFS2. Removing
1293 compressors and mean you cannot read existing file systems,
1294 and enabling experimental compressors can mean that you
1295 write a file system which cannot be read by a standard kernel.
1296
1297 If unsure, you should _definitely_ say 'N'.
1298
1299config JFFS2_ZLIB
1300 bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
1301 select ZLIB_INFLATE
1302 select ZLIB_DEFLATE
1303 depends on JFFS2_FS
1304 default y
1305 help
1306 Zlib is designed to be a free, general-purpose, legally unencumbered,
Thomas Gleixner182ec4e2005-11-07 11:16:07 +00001307 lossless data-compression library for use on virtually any computer
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308 hardware and operating system. See <http://www.gzip.org/zlib/> for
1309 further information.
Thomas Gleixner182ec4e2005-11-07 11:16:07 +00001310
Linus Torvalds1da177e2005-04-16 15:20:36 -07001311 Say 'Y' if unsure.
1312
1313config JFFS2_RTIME
1314 bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
1315 depends on JFFS2_FS
1316 default y
1317 help
1318 Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
1319
1320config JFFS2_RUBIN
1321 bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
1322 depends on JFFS2_FS
1323 default n
1324 help
1325 RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
1326
1327choice
1328 prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
1329 default JFFS2_CMODE_PRIORITY
1330 depends on JFFS2_FS
1331 help
Thomas Gleixner182ec4e2005-11-07 11:16:07 +00001332 You can set here the default compression mode of JFFS2 from
Linus Torvalds1da177e2005-04-16 15:20:36 -07001333 the available compression modes. Don't touch if unsure.
1334
1335config JFFS2_CMODE_NONE
1336 bool "no compression"
1337 help
1338 Uses no compression.
1339
1340config JFFS2_CMODE_PRIORITY
1341 bool "priority"
1342 help
Matt LaPlantecc2e2762006-10-03 22:22:29 +02001343 Tries the compressors in a predefined order and chooses the first
Linus Torvalds1da177e2005-04-16 15:20:36 -07001344 successful one.
1345
1346config JFFS2_CMODE_SIZE
1347 bool "size (EXPERIMENTAL)"
1348 help
Thomas Gleixner182ec4e2005-11-07 11:16:07 +00001349 Tries all compressors and chooses the one which has the smallest
Linus Torvalds1da177e2005-04-16 15:20:36 -07001350 result.
1351
1352endchoice
1353
1354config CRAMFS
1355 tristate "Compressed ROM file system support (cramfs)"
David Howells93614012006-09-30 20:45:40 +02001356 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001357 select ZLIB_INFLATE
1358 help
1359 Saying Y here includes support for CramFs (Compressed ROM File
1360 System). CramFs is designed to be a simple, small, and compressed
1361 file system for ROM based embedded systems. CramFs is read-only,
1362 limited to 256MB file systems (with 16MB files), and doesn't support
1363 16/32 bits uid/gid, hard links and timestamps.
1364
1365 See <file:Documentation/filesystems/cramfs.txt> and
1366 <file:fs/cramfs/README> for further information.
1367
1368 To compile this as a module, choose M here: the module will be called
1369 cramfs. Note that the root file system (the one containing the
1370 directory /) cannot be compiled as a module.
1371
1372 If unsure, say N.
1373
1374config VXFS_FS
1375 tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
David Howells93614012006-09-30 20:45:40 +02001376 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001377 help
1378 FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
1379 file system format. VERITAS VxFS(TM) is the standard file system
1380 of SCO UnixWare (and possibly others) and optionally available
1381 for Sunsoft Solaris, HP-UX and many other operating systems.
1382 Currently only readonly access is supported.
1383
1384 NOTE: the file system type as used by mount(1), mount(2) and
1385 fstab(5) is 'vxfs' as it describes the file system format, not
1386 the actual driver.
1387
1388 To compile this as a module, choose M here: the module will be
1389 called freevxfs. If unsure, say N.
1390
1391
1392config HPFS_FS
1393 tristate "OS/2 HPFS file system support"
David Howells93614012006-09-30 20:45:40 +02001394 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001395 help
1396 OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
1397 is the file system used for organizing files on OS/2 hard disk
1398 partitions. Say Y if you want to be able to read files from and
1399 write files to an OS/2 HPFS partition on your hard drive. OS/2
1400 floppies however are in regular MSDOS format, so you don't need this
1401 option in order to be able to read them. Read
1402 <file:Documentation/filesystems/hpfs.txt>.
1403
1404 To compile this file system support as a module, choose M here: the
1405 module will be called hpfs. If unsure, say N.
1406
1407
1408
1409config QNX4FS_FS
1410 tristate "QNX4 file system support (read only)"
David Howells93614012006-09-30 20:45:40 +02001411 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412 help
1413 This is the file system used by the real-time operating systems
1414 QNX 4 and QNX 6 (the latter is also called QNX RTP).
1415 Further information is available at <http://www.qnx.com/>.
1416 Say Y if you intend to mount QNX hard disks or floppies.
1417 Unless you say Y to "QNX4FS read-write support" below, you will
1418 only be able to read these file systems.
1419
1420 To compile this file system support as a module, choose M here: the
1421 module will be called qnx4.
1422
1423 If you don't know whether you need it, then you don't need it:
1424 answer N.
1425
1426config QNX4FS_RW
1427 bool "QNX4FS write support (DANGEROUS)"
1428 depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
1429 help
1430 Say Y if you want to test write support for QNX4 file systems.
1431
1432 It's currently broken, so for now:
1433 answer N.
1434
1435
1436
1437config SYSV_FS
1438 tristate "System V/Xenix/V7/Coherent file system support"
David Howells93614012006-09-30 20:45:40 +02001439 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001440 help
1441 SCO, Xenix and Coherent are commercial Unix systems for Intel
1442 machines, and Version 7 was used on the DEC PDP-11. Saying Y
1443 here would allow you to read from their floppies and hard disk
1444 partitions.
1445
1446 If you have floppies or hard disk partitions like that, it is likely
1447 that they contain binaries from those other Unix systems; in order
Matt LaPlantecab00892006-10-03 22:36:44 +02001448 to run these binaries, you will want to install linux-abi which is
Linus Torvalds1da177e2005-04-16 15:20:36 -07001449 a set of kernel modules that lets you run SCO, Xenix, Wyse,
1450 UnixWare, Dell Unix and System V programs under Linux. It is
1451 available via FTP (user: ftp) from
1452 <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
1453 NOTE: that will work only for binaries from Intel-based systems;
1454 PDP ones will have to wait until somebody ports Linux to -11 ;-)
1455
1456 If you only intend to mount files from some other Unix over the
1457 network using NFS, you don't need the System V file system support
1458 (but you need NFS file system support obviously).
1459
1460 Note that this option is generally not needed for floppies, since a
1461 good portable way to transport files and directories between unixes
1462 (and even other operating systems) is given by the tar program ("man
1463 tar" or preferably "info tar"). Note also that this option has
1464 nothing whatsoever to do with the option "System V IPC". Read about
1465 the System V file system in
1466 <file:Documentation/filesystems/sysv-fs.txt>.
1467 Saying Y here will enlarge your kernel by about 27 KB.
1468
1469 To compile this as a module, choose M here: the module will be called
1470 sysv.
1471
1472 If you haven't heard about all of this before, it's safe to say N.
1473
1474
1475
1476config UFS_FS
1477 tristate "UFS file system support (read only)"
David Howells93614012006-09-30 20:45:40 +02001478 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 help
1480 BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
1481 OpenBSD and NeXTstep) use a file system called UFS. Some System V
1482 Unixes can create and mount hard disk partitions and diskettes using
1483 this file system as well. Saying Y here will allow you to read from
1484 these partitions; if you also want to write to them, say Y to the
1485 experimental "UFS file system write support", below. Please read the
1486 file <file:Documentation/filesystems/ufs.txt> for more information.
1487
1488 The recently released UFS2 variant (used in FreeBSD 5.x) is
1489 READ-ONLY supported.
1490
1491 If you only intend to mount files from some other Unix over the
1492 network using NFS, you don't need the UFS file system support (but
1493 you need NFS file system support obviously).
1494
1495 Note that this option is generally not needed for floppies, since a
1496 good portable way to transport files and directories between unixes
1497 (and even other operating systems) is given by the tar program ("man
1498 tar" or preferably "info tar").
1499
1500 When accessing NeXTstep files, you may need to convert them from the
1501 NeXT character set to the Latin1 character set; use the program
1502 recode ("info recode") for this purpose.
1503
1504 To compile the UFS file system support as a module, choose M here: the
1505 module will be called ufs.
1506
1507 If you haven't heard about all of this before, it's safe to say N.
1508
1509config UFS_FS_WRITE
1510 bool "UFS file system write support (DANGEROUS)"
Evgeniy Dushistov5afb3142006-06-25 05:47:24 -07001511 depends on UFS_FS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512 help
1513 Say Y here if you want to try writing to UFS partitions. This is
1514 experimental, so you should back up your UFS partitions beforehand.
1515
Evgeniy Dushistovabf5d152006-06-25 05:47:24 -07001516config UFS_DEBUG
1517 bool "UFS debugging"
1518 depends on UFS_FS
1519 help
1520 If you are experiencing any problems with the UFS filesystem, say
1521 Y here. This will result in _many_ additional debugging messages to be
1522 written to the system log.
1523
Linus Torvalds1da177e2005-04-16 15:20:36 -07001524endmenu
1525
1526menu "Network File Systems"
1527 depends on NET
1528
1529config NFS_FS
1530 tristate "NFS file system support"
1531 depends on INET
1532 select LOCKD
1533 select SUNRPC
Andreas Gruenbacherb7fa0552005-06-22 17:16:27 +00001534 select NFS_ACL_SUPPORT if NFS_V3_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001535 help
1536 If you are connected to some other (usually local) Unix computer
1537 (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
1538 on that computer (the NFS server) using the Network File Sharing
1539 protocol, say Y. "Mounting files" means that the client can access
1540 the files with usual UNIX commands as if they were sitting on the
1541 client's hard disk. For this to work, the server must run the
1542 programs nfsd and mountd (but does not need to have NFS file system
1543 support enabled in its kernel). NFS is explained in the Network
1544 Administrator's Guide, available from
1545 <http://www.tldp.org/docs.html#guide>, on its man page: "man
1546 nfs", and in the NFS-HOWTO.
1547
1548 A superior but less widely used alternative to NFS is provided by
1549 the Coda file system; see "Coda file system support" below.
1550
1551 If you say Y here, you should have said Y to TCP/IP networking also.
1552 This option would enlarge your kernel by about 27 KB.
1553
1554 To compile this file system support as a module, choose M here: the
1555 module will be called nfs.
1556
1557 If you are configuring a diskless machine which will mount its root
1558 file system over NFS at boot time, say Y here and to "Kernel
1559 level IP autoconfiguration" above and to "Root file system on NFS"
1560 below. You cannot compile this driver as a module in this case.
1561 There are two packages designed for booting diskless machines over
1562 the net: netboot, available from
1563 <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
1564 available from <http://ftp1.sourceforge.net/etherboot/>.
1565
1566 If you don't know what all this is about, say N.
1567
1568config NFS_V3
1569 bool "Provide NFSv3 client support"
1570 depends on NFS_FS
1571 help
1572 Say Y here if you want your NFS client to be able to speak version
1573 3 of the NFS protocol.
1574
1575 If unsure, say Y.
1576
Andreas Gruenbacherb7fa0552005-06-22 17:16:27 +00001577config NFS_V3_ACL
1578 bool "Provide client support for the NFSv3 ACL protocol extension"
1579 depends on NFS_V3
1580 help
1581 Implement the NFSv3 ACL protocol extension for manipulating POSIX
1582 Access Control Lists. The server should also be compiled with
1583 the NFSv3 ACL protocol extension; see the CONFIG_NFSD_V3_ACL option.
1584
1585 If unsure, say N.
1586
Linus Torvalds1da177e2005-04-16 15:20:36 -07001587config NFS_V4
1588 bool "Provide NFSv4 client support (EXPERIMENTAL)"
1589 depends on NFS_FS && EXPERIMENTAL
1590 select RPCSEC_GSS_KRB5
1591 help
1592 Say Y here if you want your NFS client to be able to speak the newer
1593 version 4 of the NFS protocol.
1594
1595 Note: Requires auxiliary userspace daemons which may be found on
1596 http://www.citi.umich.edu/projects/nfsv4/
1597
1598 If unsure, say N.
1599
1600config NFS_DIRECTIO
Chuck Lever026ed5c2006-09-20 14:33:07 -04001601 bool "Allow direct I/O on NFS files"
1602 depends on NFS_FS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001603 help
1604 This option enables applications to perform uncached I/O on files
1605 in NFS file systems using the O_DIRECT open() flag. When O_DIRECT
1606 is set for a file, its data is not cached in the system's page
1607 cache. Data is moved to and from user-level application buffers
1608 directly. Unlike local disk-based file systems, NFS O_DIRECT has
1609 no alignment restrictions.
1610
1611 Unless your program is designed to use O_DIRECT properly, you are
1612 much better off allowing the NFS client to manage data caching for
1613 you. Misusing O_DIRECT can cause poor server performance or network
1614 storms. This kernel build option defaults OFF to avoid exposing
1615 system administrators unwittingly to a potentially hazardous
1616 feature.
1617
1618 For more details on NFS O_DIRECT, see fs/nfs/direct.c.
1619
1620 If unsure, say N. This reduces the size of the NFS client, and
1621 causes open() to return EINVAL if a file residing in NFS is
1622 opened with the O_DIRECT flag.
1623
1624config NFSD
1625 tristate "NFS server support"
1626 depends on INET
1627 select LOCKD
1628 select SUNRPC
1629 select EXPORTFS
Herbert Xuf05e15b2006-06-26 00:25:39 -07001630 select NFSD_V2_ACL if NFSD_V3_ACL
1631 select NFS_ACL_SUPPORT if NFSD_V2_ACL
1632 select NFSD_TCP if NFSD_V4
1633 select CRYPTO_MD5 if NFSD_V4
1634 select CRYPTO if NFSD_V4
1635 select FS_POSIX_ACL if NFSD_V4
Linus Torvalds1da177e2005-04-16 15:20:36 -07001636 help
1637 If you want your Linux box to act as an NFS *server*, so that other
1638 computers on your local network which support NFS can access certain
1639 directories on your box transparently, you have two options: you can
1640 use the self-contained user space program nfsd, in which case you
1641 should say N here, or you can say Y and use the kernel based NFS
1642 server. The advantage of the kernel based solution is that it is
1643 faster.
1644
1645 In either case, you will need support software; the respective
1646 locations are given in the file <file:Documentation/Changes> in the
1647 NFS section.
1648
1649 If you say Y here, you will get support for version 2 of the NFS
1650 protocol (NFSv2). If you also want NFSv3, say Y to the next question
1651 as well.
1652
1653 Please read the NFS-HOWTO, available from
1654 <http://www.tldp.org/docs.html#howto>.
1655
1656 To compile the NFS server support as a module, choose M here: the
1657 module will be called nfsd. If unsure, say N.
1658
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001659config NFSD_V2_ACL
1660 bool
1661 depends on NFSD
1662
Linus Torvalds1da177e2005-04-16 15:20:36 -07001663config NFSD_V3
1664 bool "Provide NFSv3 server support"
1665 depends on NFSD
1666 help
1667 If you would like to include the NFSv3 server as well as the NFSv2
1668 server, say Y here. If unsure, say Y.
1669
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001670config NFSD_V3_ACL
1671 bool "Provide server support for the NFSv3 ACL protocol extension"
1672 depends on NFSD_V3
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001673 help
1674 Implement the NFSv3 ACL protocol extension for manipulating POSIX
1675 Access Control Lists on exported file systems. NFS clients should
1676 be compiled with the NFSv3 ACL protocol extension; see the
1677 CONFIG_NFS_V3_ACL option. If unsure, say N.
1678
Linus Torvalds1da177e2005-04-16 15:20:36 -07001679config NFSD_V4
1680 bool "Provide NFSv4 server support (EXPERIMENTAL)"
1681 depends on NFSD_V3 && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001682 help
1683 If you would like to include the NFSv4 server as well as the NFSv2
1684 and NFSv3 servers, say Y here. This feature is experimental, and
1685 should only be used if you are interested in helping to test NFSv4.
1686 If unsure, say N.
1687
1688config NFSD_TCP
1689 bool "Provide NFS server over TCP support"
1690 depends on NFSD
1691 default y
1692 help
1693 If you want your NFS server to support TCP connections, say Y here.
1694 TCP connections usually perform better than the default UDP when
1695 the network is lossy or congested. If unsure, say Y.
1696
1697config ROOT_NFS
1698 bool "Root file system on NFS"
1699 depends on NFS_FS=y && IP_PNP
1700 help
1701 If you want your Linux box to mount its whole root file system (the
1702 one containing the directory /) from some other computer over the
1703 net via NFS (presumably because your box doesn't have a hard disk),
1704 say Y. Read <file:Documentation/nfsroot.txt> for details. It is
1705 likely that in this case, you also want to say Y to "Kernel level IP
1706 autoconfiguration" so that your box can discover its network address
1707 at boot time.
1708
1709 Most people say N here.
1710
1711config LOCKD
1712 tristate
1713
1714config LOCKD_V4
1715 bool
1716 depends on NFSD_V3 || NFS_V3
1717 default y
1718
1719config EXPORTFS
1720 tristate
1721
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001722config NFS_ACL_SUPPORT
1723 tristate
1724 select FS_POSIX_ACL
1725
1726config NFS_COMMON
1727 bool
1728 depends on NFSD || NFS_FS
1729 default y
1730
Linus Torvalds1da177e2005-04-16 15:20:36 -07001731config SUNRPC
1732 tristate
1733
1734config SUNRPC_GSS
1735 tristate
1736
1737config RPCSEC_GSS_KRB5
1738 tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
1739 depends on SUNRPC && EXPERIMENTAL
1740 select SUNRPC_GSS
1741 select CRYPTO
1742 select CRYPTO_MD5
1743 select CRYPTO_DES
Patrick McHardybcbaecb2006-10-25 16:49:36 +10001744 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001745 help
1746 Provides for secure RPC calls by means of a gss-api
1747 mechanism based on Kerberos V5. This is required for
1748 NFSv4.
1749
1750 Note: Requires an auxiliary userspace daemon which may be found on
1751 http://www.citi.umich.edu/projects/nfsv4/
1752
1753 If unsure, say N.
1754
1755config RPCSEC_GSS_SPKM3
1756 tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
1757 depends on SUNRPC && EXPERIMENTAL
1758 select SUNRPC_GSS
1759 select CRYPTO
1760 select CRYPTO_MD5
1761 select CRYPTO_DES
J. Bruce Fieldsdf6db302006-03-20 23:25:10 -05001762 select CRYPTO_CAST5
Patrick McHardybcbaecb2006-10-25 16:49:36 +10001763 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001764 help
1765 Provides for secure RPC calls by means of a gss-api
1766 mechanism based on the SPKM3 public-key mechanism.
1767
1768 Note: Requires an auxiliary userspace daemon which may be found on
1769 http://www.citi.umich.edu/projects/nfsv4/
1770
1771 If unsure, say N.
1772
1773config SMB_FS
1774 tristate "SMB file system support (to mount Windows shares etc.)"
1775 depends on INET
1776 select NLS
1777 help
1778 SMB (Server Message Block) is the protocol Windows for Workgroups
1779 (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
1780 files and printers over local networks. Saying Y here allows you to
1781 mount their file systems (often called "shares" in this context) and
1782 access them just like any other Unix directory. Currently, this
1783 works only if the Windows machines use TCP/IP as the underlying
1784 transport protocol, and not NetBEUI. For details, read
1785 <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
1786 available from <http://www.tldp.org/docs.html#howto>.
1787
1788 Note: if you just want your box to act as an SMB *server* and make
1789 files and printing services available to Windows clients (which need
1790 to have a TCP/IP stack), you don't need to say Y here; you can use
1791 the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
1792 for that.
1793
1794 General information about how to connect Linux, Windows machines and
1795 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1796
1797 To compile the SMB support as a module, choose M here: the module will
1798 be called smbfs. Most people say N, however.
1799
1800config SMB_NLS_DEFAULT
1801 bool "Use a default NLS"
1802 depends on SMB_FS
1803 help
1804 Enabling this will make smbfs use nls translations by default. You
1805 need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
1806 settings and you need to give the default nls for the SMB server as
1807 CONFIG_SMB_NLS_REMOTE.
1808
1809 The nls settings can be changed at mount time, if your smbmount
1810 supports that, using the codepage and iocharset parameters.
1811
1812 smbmount from samba 2.2.0 or later supports this.
1813
1814config SMB_NLS_REMOTE
1815 string "Default Remote NLS Option"
1816 depends on SMB_NLS_DEFAULT
1817 default "cp437"
1818 help
1819 This setting allows you to specify a default value for which
1820 codepage the server uses. If this field is left blank no
1821 translations will be done by default. The local codepage/charset
1822 default to CONFIG_NLS_DEFAULT.
1823
1824 The nls settings can be changed at mount time, if your smbmount
1825 supports that, using the codepage and iocharset parameters.
1826
1827 smbmount from samba 2.2.0 or later supports this.
1828
1829config CIFS
1830 tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)"
1831 depends on INET
1832 select NLS
1833 help
1834 This is the client VFS module for the Common Internet File System
1835 (CIFS) protocol which is the successor to the Server Message Block
1836 (SMB) protocol, the native file sharing mechanism for most early
1837 PC operating systems. The CIFS protocol is fully supported by
1838 file servers such as Windows 2000 (including Windows 2003, NT 4
1839 and Windows XP) as well by Samba (which provides excellent CIFS
Steve Frenchec58ef02005-11-04 09:44:33 -08001840 server support for Linux and many other operating systems). Limited
Steve French8af18972007-02-14 04:42:51 +00001841 support for OS/2 and Windows ME and similar servers is provided as well.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001842
1843 The intent of the cifs module is to provide an advanced
Steve French8af18972007-02-14 04:42:51 +00001844 network file system client for mounting to CIFS compliant servers,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001845 including support for dfs (hierarchical name space), secure per-user
1846 session establishment, safe distributed caching (oplock), optional
Steve French8af18972007-02-14 04:42:51 +00001847 packet signing, Unicode and other internationalization improvements.
1848 If you need to mount to Samba or Windows from this machine, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001849
1850config CIFS_STATS
1851 bool "CIFS statistics"
1852 depends on CIFS
1853 help
1854 Enabling this option will cause statistics for each server share
1855 mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
1856
Steve Frenchec58ef02005-11-04 09:44:33 -08001857config CIFS_STATS2
Steve French39798772006-05-31 22:40:51 +00001858 bool "Extended statistics"
Steve Frenchec58ef02005-11-04 09:44:33 -08001859 depends on CIFS_STATS
1860 help
1861 Enabling this option will allow more detailed statistics on SMB
1862 request timing to be displayed in /proc/fs/cifs/DebugData and also
1863 allow optional logging of slow responses to dmesg (depending on the
1864 value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
1865 These additional statistics may have a minor effect on performance
1866 and memory utilization.
1867
1868 Unless you are a developer or are doing network performance analysis
1869 or tuning, say N.
1870
Steve French39798772006-05-31 22:40:51 +00001871config CIFS_WEAK_PW_HASH
1872 bool "Support legacy servers which use weaker LANMAN security"
1873 depends on CIFS
1874 help
1875 Modern CIFS servers including Samba and most Windows versions
1876 (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
1877 security mechanisms. These hash the password more securely
1878 than the mechanisms used in the older LANMAN version of the
1879 SMB protocol needed to establish sessions with old SMB servers.
1880
1881 Enabling this option allows the cifs module to mount to older
1882 LANMAN based servers such as OS/2 and Windows 95, but such
1883 mounts may be less secure than mounts using NTLM or more recent
1884 security mechanisms if you are on a public network. Unless you
1885 have a need to access old SMB servers (and are on a private
1886 network) you probably want to say N. Even if this support
1887 is enabled in the kernel build, they will not be used
1888 automatically. At runtime LANMAN mounts are disabled but
1889 can be set to required (or optional) either in
1890 /proc/fs/cifs (see fs/cifs/README for more detail) or via an
1891 option on the mount command. This support is disabled by
1892 default in order to reduce the possibility of a downgrade
1893 attack.
1894
1895 If unsure, say N.
1896
Linus Torvalds1da177e2005-04-16 15:20:36 -07001897config CIFS_XATTR
Steve Frenchec58ef02005-11-04 09:44:33 -08001898 bool "CIFS extended attributes"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001899 depends on CIFS
1900 help
1901 Extended attributes are name:value pairs associated with inodes by
1902 the kernel or by users (see the attr(5) manual page, or visit
1903 <http://acl.bestbits.at/> for details). CIFS maps the name of
1904 extended attributes beginning with the user namespace prefix
1905 to SMB/CIFS EAs. EAs are stored on Windows servers without the
1906 user namespace prefix, but their names are seen by Linux cifs clients
1907 prefaced by the user namespace prefix. The system namespace
1908 (used by some filesystems to store ACLs) is not supported at
1909 this time.
Steve Frenchec58ef02005-11-04 09:44:33 -08001910
Linus Torvalds1da177e2005-04-16 15:20:36 -07001911 If unsure, say N.
1912
1913config CIFS_POSIX
Steve Frenchec58ef02005-11-04 09:44:33 -08001914 bool "CIFS POSIX Extensions"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001915 depends on CIFS_XATTR
1916 help
1917 Enabling this option will cause the cifs client to attempt to
1918 negotiate a newer dialect with servers, such as Samba 3.0.5
1919 or later, that optionally can handle more POSIX like (rather
1920 than Windows like) file behavior. It also enables
1921 support for POSIX ACLs (getfacl and setfacl) to servers
1922 (such as Samba 3.10 and later) which can negotiate
1923 CIFS POSIX ACL support. If unsure, say N.
1924
Steve French39798772006-05-31 22:40:51 +00001925config CIFS_DEBUG2
Steve French3856a9d2006-06-01 19:38:46 +00001926 bool "Enable additional CIFS debugging routines"
Steve French8ba10ab2006-07-08 02:17:40 +00001927 depends on CIFS
Steve French39798772006-05-31 22:40:51 +00001928 help
1929 Enabling this option adds a few more debugging routines
1930 to the cifs code which slightly increases the size of
1931 the cifs module and can cause additional logging of debug
1932 messages in some error paths, slowing performance. This
1933 option can be turned off unless you are debugging
1934 cifs problems. If unsure, say N.
1935
Linus Torvalds1da177e2005-04-16 15:20:36 -07001936config CIFS_EXPERIMENTAL
1937 bool "CIFS Experimental Features (EXPERIMENTAL)"
Steve Frenchcb9dbff2005-11-02 11:37:15 -08001938 depends on CIFS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001939 help
Steve Frenchec58ef02005-11-04 09:44:33 -08001940 Enables cifs features under testing. These features are
Steve French8af18972007-02-14 04:42:51 +00001941 experimental and currently include DFS support and directory
1942 change notification ie fcntl(F_DNOTIFY), as well as the upcall
1943 mechanism which will be used for Kerberos session negotiation
1944 and uid remapping. Some of these features also may depend on
1945 setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
1946 (which is disabled by default). See the file fs/cifs/README
1947 for more details. If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001948
Steve Frencha2653eb2005-11-10 15:33:38 -08001949config CIFS_UPCALL
Steve French39798772006-05-31 22:40:51 +00001950 bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
Steve Frencha2653eb2005-11-10 15:33:38 -08001951 depends on CIFS_EXPERIMENTAL
Andrew Morton230a0392006-10-12 15:07:55 +00001952 depends on CONNECTOR
Steve Frencha2653eb2005-11-10 15:33:38 -08001953 help
1954 Enables an upcall mechanism for CIFS which will be used to contact
1955 userspace helper utilities to provide SPNEGO packaged Kerberos
1956 tickets which are needed to mount to certain secure servers
Steve French1b397f42005-11-10 19:36:39 -08001957 (for which more secure Kerberos authentication is required). If
1958 unsure, say N.
Steve Frencha2653eb2005-11-10 15:33:38 -08001959
Linus Torvalds1da177e2005-04-16 15:20:36 -07001960config NCP_FS
1961 tristate "NCP file system support (to mount NetWare volumes)"
1962 depends on IPX!=n || INET
1963 help
1964 NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
1965 used by Novell NetWare clients to talk to file servers. It is to
1966 IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
1967 to mount NetWare file server volumes and to access them just like
1968 any other Unix directory. For details, please read the file
1969 <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
1970 the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
1971
1972 You do not have to say Y here if you want your Linux box to act as a
1973 file *server* for Novell NetWare clients.
1974
1975 General information about how to connect Linux, Windows machines and
1976 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1977
1978 To compile this as a module, choose M here: the module will be called
1979 ncpfs. Say N unless you are connected to a Novell network.
1980
1981source "fs/ncpfs/Kconfig"
1982
1983config CODA_FS
1984 tristate "Coda file system support (advanced network fs)"
1985 depends on INET
1986 help
1987 Coda is an advanced network file system, similar to NFS in that it
1988 enables you to mount file systems of a remote server and access them
1989 with regular Unix commands as if they were sitting on your hard
1990 disk. Coda has several advantages over NFS: support for
1991 disconnected operation (e.g. for laptops), read/write server
1992 replication, security model for authentication and encryption,
1993 persistent client caches and write back caching.
1994
1995 If you say Y here, your Linux box will be able to act as a Coda
1996 *client*. You will need user level code as well, both for the
1997 client and server. Servers are currently user level, i.e. they need
1998 no kernel support. Please read
1999 <file:Documentation/filesystems/coda.txt> and check out the Coda
2000 home page <http://www.coda.cs.cmu.edu/>.
2001
2002 To compile the coda client support as a module, choose M here: the
2003 module will be called coda.
2004
2005config CODA_FS_OLD_API
2006 bool "Use 96-bit Coda file identifiers"
2007 depends on CODA_FS
2008 help
2009 A new kernel-userspace API had to be introduced for Coda v6.0
2010 to support larger 128-bit file identifiers as needed by the
2011 new realms implementation.
2012
2013 However this new API is not backward compatible with older
2014 clients. If you really need to run the old Coda userspace
2015 cache manager then say Y.
2016
2017 For most cases you probably want to say N.
2018
2019config AFS_FS
David Howells64aaa4f2006-11-16 01:19:27 -08002020 tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002021 depends on INET && EXPERIMENTAL
2022 select RXRPC
2023 help
2024 If you say Y here, you will get an experimental Andrew File System
2025 driver. It currently only supports unsecured read-only AFS access.
2026
Matt LaPlantecc2e2762006-10-03 22:22:29 +02002027 See <file:Documentation/filesystems/afs.txt> for more information.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002028
2029 If unsure, say N.
2030
2031config RXRPC
2032 tristate
2033
Eric Van Hensbergen93fa58c2005-09-09 13:04:18 -07002034config 9P_FS
2035 tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
2036 depends on INET && EXPERIMENTAL
2037 help
2038 If you say Y here, you will get experimental support for
2039 Plan 9 resource sharing via the 9P2000 protocol.
2040
2041 See <http://v9fs.sf.net> for more information.
2042
2043 If unsure, say N.
2044
Linus Torvalds1da177e2005-04-16 15:20:36 -07002045endmenu
2046
David Howells93614012006-09-30 20:45:40 +02002047if BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07002048menu "Partition Types"
2049
2050source "fs/partitions/Kconfig"
2051
2052endmenu
David Howells93614012006-09-30 20:45:40 +02002053endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07002054
2055source "fs/nls/Kconfig"
David Teiglande7fd4172006-01-18 09:30:29 +00002056source "fs/dlm/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002057
2058endmenu
2059