blob: 694bae162fed916b712112d4feda495e583bcda8 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Id: parport_ieee1284.c,v 1.4 1997/10/19 21:37:21 philip Exp $
2 * IEEE-1284 implementation for parport.
3 *
4 * Authors: Phil Blundell <philb@gnu.org>
5 * Carsten Gross <carsten@sol.wohnheim.uni-ulm.de>
6 * Jose Renau <renau@acm.org>
7 * Tim Waugh <tim@cyberelk.demon.co.uk> (largely rewritten)
8 *
9 * This file is responsible for IEEE 1284 negotiation, and for handing
10 * read/write requests to low-level drivers.
11 *
12 * Any part of this program may be used in documents licensed under
13 * the GNU Free Documentation License, Version 1.1 or any later version
14 * published by the Free Software Foundation.
15 *
16 * Various hacks, Fred Barnes <frmb2@ukc.ac.uk>, 04/2000
17 */
18
19#include <linux/config.h>
20#include <linux/module.h>
21#include <linux/threads.h>
22#include <linux/parport.h>
23#include <linux/delay.h>
24#include <linux/kernel.h>
25#include <linux/interrupt.h>
26#include <linux/timer.h>
27#include <linux/sched.h>
28
29#undef DEBUG /* undef me for production */
30
31#ifdef CONFIG_LP_CONSOLE
32#undef DEBUG /* Don't want a garbled console */
33#endif
34
35#ifdef DEBUG
36#define DPRINTK(stuff...) printk (stuff)
37#else
38#define DPRINTK(stuff...)
39#endif
40
41/* Make parport_wait_peripheral wake up.
42 * It will be useful to call this from an interrupt handler. */
43static void parport_ieee1284_wakeup (struct parport *port)
44{
45 up (&port->physport->ieee1284.irq);
46}
47
48static struct parport *port_from_cookie[PARPORT_MAX];
49static void timeout_waiting_on_port (unsigned long cookie)
50{
51 parport_ieee1284_wakeup (port_from_cookie[cookie % PARPORT_MAX]);
52}
53
54/**
55 * parport_wait_event - wait for an event on a parallel port
56 * @port: port to wait on
57 * @timeout: time to wait (in jiffies)
58 *
59 * This function waits for up to @timeout jiffies for an
60 * interrupt to occur on a parallel port. If the port timeout is
61 * set to zero, it returns immediately.
62 *
63 * If an interrupt occurs before the timeout period elapses, this
64 * function returns one immediately. If it times out, it returns
65 * a value greater than zero. An error code less than zero
66 * indicates an error (most likely a pending signal), and the
67 * calling code should finish what it's doing as soon as it can.
68 */
69
70int parport_wait_event (struct parport *port, signed long timeout)
71{
72 int ret;
73 struct timer_list timer;
74
75 if (!port->physport->cad->timeout)
76 /* Zero timeout is special, and we can't down() the
77 semaphore. */
78 return 1;
79
80 init_timer (&timer);
81 timer.expires = jiffies + timeout;
82 timer.function = timeout_waiting_on_port;
83 port_from_cookie[port->number % PARPORT_MAX] = port;
84 timer.data = port->number;
85
86 add_timer (&timer);
87 ret = down_interruptible (&port->physport->ieee1284.irq);
88 if (!del_timer (&timer) && !ret)
89 /* Timed out. */
90 ret = 1;
91
92 return ret;
93}
94
95/**
96 * parport_poll_peripheral - poll status lines
97 * @port: port to watch
98 * @mask: status lines to watch
99 * @result: desired values of chosen status lines
100 * @usec: timeout
101 *
102 * This function busy-waits until the masked status lines have
103 * the desired values, or until the timeout period elapses. The
104 * @mask and @result parameters are bitmasks, with the bits
105 * defined by the constants in parport.h: %PARPORT_STATUS_BUSY,
106 * and so on.
107 *
108 * This function does not call schedule(); instead it busy-waits
109 * using udelay(). It currently has a resolution of 5usec.
110 *
111 * If the status lines take on the desired values before the
112 * timeout period elapses, parport_poll_peripheral() returns zero
113 * immediately. A zero return value greater than zero indicates
114 * a timeout. An error code (less than zero) indicates an error,
115 * most likely a signal that arrived, and the caller should
116 * finish what it is doing as soon as possible.
117*/
118
119int parport_poll_peripheral(struct parport *port,
120 unsigned char mask,
121 unsigned char result,
122 int usec)
123{
124 /* Zero return code is success, >0 is timeout. */
125 int count = usec / 5 + 2;
126 int i;
127 unsigned char status;
128 for (i = 0; i < count; i++) {
129 status = parport_read_status (port);
130 if ((status & mask) == result)
131 return 0;
132 if (signal_pending (current))
133 return -EINTR;
134 if (need_resched())
135 break;
136 if (i >= 2)
137 udelay (5);
138 }
139
140 return 1;
141}
142
143/**
144 * parport_wait_peripheral - wait for status lines to change in 35ms
145 * @port: port to watch
146 * @mask: status lines to watch
147 * @result: desired values of chosen status lines
148 *
149 * This function waits until the masked status lines have the
150 * desired values, or until 35ms have elapsed (see IEEE 1284-1994
151 * page 24 to 25 for why this value in particular is hardcoded).
152 * The @mask and @result parameters are bitmasks, with the bits
153 * defined by the constants in parport.h: %PARPORT_STATUS_BUSY,
154 * and so on.
155 *
156 * The port is polled quickly to start off with, in anticipation
157 * of a fast response from the peripheral. This fast polling
158 * time is configurable (using /proc), and defaults to 500usec.
159 * If the timeout for this port (see parport_set_timeout()) is
160 * zero, the fast polling time is 35ms, and this function does
161 * not call schedule().
162 *
163 * If the timeout for this port is non-zero, after the fast
164 * polling fails it uses parport_wait_event() to wait for up to
165 * 10ms, waking up if an interrupt occurs.
166 */
167
168int parport_wait_peripheral(struct parport *port,
169 unsigned char mask,
170 unsigned char result)
171{
172 int ret;
173 int usec;
174 unsigned long deadline;
175 unsigned char status;
176
177 usec = port->physport->spintime; /* usecs of fast polling */
178 if (!port->physport->cad->timeout)
179 /* A zero timeout is "special": busy wait for the
180 entire 35ms. */
181 usec = 35000;
182
183 /* Fast polling.
184 *
185 * This should be adjustable.
186 * How about making a note (in the device structure) of how long
187 * it takes, so we know for next time?
188 */
189 ret = parport_poll_peripheral (port, mask, result, usec);
190 if (ret != 1)
191 return ret;
192
193 if (!port->physport->cad->timeout)
194 /* We may be in an interrupt handler, so we can't poll
195 * slowly anyway. */
196 return 1;
197
198 /* 40ms of slow polling. */
199 deadline = jiffies + (HZ + 24) / 25;
200 while (time_before (jiffies, deadline)) {
201 int ret;
202
203 if (signal_pending (current))
204 return -EINTR;
205
206 /* Wait for 10ms (or until an interrupt occurs if
207 * the handler is set) */
208 if ((ret = parport_wait_event (port, (HZ + 99) / 100)) < 0)
209 return ret;
210
211 status = parport_read_status (port);
212 if ((status & mask) == result)
213 return 0;
214
215 if (!ret) {
216 /* parport_wait_event didn't time out, but the
217 * peripheral wasn't actually ready either.
218 * Wait for another 10ms. */
219 __set_current_state (TASK_INTERRUPTIBLE);
220 schedule_timeout ((HZ+ 99) / 100);
221 }
222 }
223
224 return 1;
225}
226
227#ifdef CONFIG_PARPORT_1284
228/* Terminate a negotiated mode. */
229static void parport_ieee1284_terminate (struct parport *port)
230{
231 int r;
232 port = port->physport;
233
234 /* EPP terminates differently. */
235 switch (port->ieee1284.mode) {
236 case IEEE1284_MODE_EPP:
237 case IEEE1284_MODE_EPPSL:
238 case IEEE1284_MODE_EPPSWE:
239 /* Terminate from EPP mode. */
240
241 /* Event 68: Set nInit low */
242 parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
243 udelay (50);
244
245 /* Event 69: Set nInit high, nSelectIn low */
246 parport_frob_control (port,
247 PARPORT_CONTROL_SELECT
248 | PARPORT_CONTROL_INIT,
249 PARPORT_CONTROL_SELECT
250 | PARPORT_CONTROL_INIT);
251 break;
252
253 case IEEE1284_MODE_ECP:
254 case IEEE1284_MODE_ECPRLE:
255 case IEEE1284_MODE_ECPSWE:
256 /* In ECP we can only terminate from fwd idle phase. */
257 if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
258 /* Event 47: Set nInit high */
259 parport_frob_control (port,
260 PARPORT_CONTROL_INIT
261 | PARPORT_CONTROL_AUTOFD,
262 PARPORT_CONTROL_INIT
263 | PARPORT_CONTROL_AUTOFD);
264
265 /* Event 49: PError goes high */
266 r = parport_wait_peripheral (port,
267 PARPORT_STATUS_PAPEROUT,
268 PARPORT_STATUS_PAPEROUT);
269 if (r)
270 DPRINTK (KERN_INFO "%s: Timeout at event 49\n",
271 port->name);
272
273 parport_data_forward (port);
274 DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
275 port->name);
276 port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
277 }
278
279 /* fall-though.. */
280
281 default:
282 /* Terminate from all other modes. */
283
284 /* Event 22: Set nSelectIn low, nAutoFd high */
285 parport_frob_control (port,
286 PARPORT_CONTROL_SELECT
287 | PARPORT_CONTROL_AUTOFD,
288 PARPORT_CONTROL_SELECT);
289
290 /* Event 24: nAck goes low */
291 r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
292 if (r)
293 DPRINTK (KERN_INFO "%s: Timeout at event 24\n",
294 port->name);
295
296 /* Event 25: Set nAutoFd low */
297 parport_frob_control (port,
298 PARPORT_CONTROL_AUTOFD,
299 PARPORT_CONTROL_AUTOFD);
300
301 /* Event 27: nAck goes high */
302 r = parport_wait_peripheral (port,
303 PARPORT_STATUS_ACK,
304 PARPORT_STATUS_ACK);
305 if (r)
306 DPRINTK (KERN_INFO "%s: Timeout at event 27\n",
307 port->name);
308
309 /* Event 29: Set nAutoFd high */
310 parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
311 }
312
313 port->ieee1284.mode = IEEE1284_MODE_COMPAT;
314 port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
315
316 DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
317 port->name);
318}
319#endif /* IEEE1284 support */
320
321/**
322 * parport_negotiate - negotiate an IEEE 1284 mode
323 * @port: port to use
324 * @mode: mode to negotiate to
325 *
326 * Use this to negotiate to a particular IEEE 1284 transfer mode.
327 * The @mode parameter should be one of the constants in
328 * parport.h starting %IEEE1284_MODE_xxx.
329 *
330 * The return value is 0 if the peripheral has accepted the
331 * negotiation to the mode specified, -1 if the peripheral is not
332 * IEEE 1284 compliant (or not present), or 1 if the peripheral
333 * has rejected the negotiation.
334 */
335
336int parport_negotiate (struct parport *port, int mode)
337{
338#ifndef CONFIG_PARPORT_1284
339 if (mode == IEEE1284_MODE_COMPAT)
340 return 0;
341 printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
342 return -1;
343#else
344 int m = mode & ~IEEE1284_ADDR;
345 int r;
346 unsigned char xflag;
347
348 port = port->physport;
349
350 /* Is there anything to do? */
351 if (port->ieee1284.mode == mode)
352 return 0;
353
354 /* Is the difference just an address-or-not bit? */
355 if ((port->ieee1284.mode & ~IEEE1284_ADDR) == (mode & ~IEEE1284_ADDR)){
356 port->ieee1284.mode = mode;
357 return 0;
358 }
359
360 /* Go to compability forward idle mode */
361 if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
362 parport_ieee1284_terminate (port);
363
364 if (mode == IEEE1284_MODE_COMPAT)
365 /* Compatibility mode: no negotiation. */
366 return 0;
367
368 switch (mode) {
369 case IEEE1284_MODE_ECPSWE:
370 m = IEEE1284_MODE_ECP;
371 break;
372 case IEEE1284_MODE_EPPSL:
373 case IEEE1284_MODE_EPPSWE:
374 m = IEEE1284_MODE_EPP;
375 break;
376 case IEEE1284_MODE_BECP:
377 return -ENOSYS; /* FIXME (implement BECP) */
378 }
379
380 if (mode & IEEE1284_EXT_LINK)
381 m = 1<<7; /* request extensibility link */
382
383 port->ieee1284.phase = IEEE1284_PH_NEGOTIATION;
384
385 /* Start off with nStrobe and nAutoFd high, and nSelectIn low */
386 parport_frob_control (port,
387 PARPORT_CONTROL_STROBE
388 | PARPORT_CONTROL_AUTOFD
389 | PARPORT_CONTROL_SELECT,
390 PARPORT_CONTROL_SELECT);
391 udelay(1);
392
393 /* Event 0: Set data */
394 parport_data_forward (port);
395 parport_write_data (port, m);
396 udelay (400); /* Shouldn't need to wait this long. */
397
398 /* Event 1: Set nSelectIn high, nAutoFd low */
399 parport_frob_control (port,
400 PARPORT_CONTROL_SELECT
401 | PARPORT_CONTROL_AUTOFD,
402 PARPORT_CONTROL_AUTOFD);
403
404 /* Event 2: PError, Select, nFault go high, nAck goes low */
405 if (parport_wait_peripheral (port,
406 PARPORT_STATUS_ERROR
407 | PARPORT_STATUS_SELECT
408 | PARPORT_STATUS_PAPEROUT
409 | PARPORT_STATUS_ACK,
410 PARPORT_STATUS_ERROR
411 | PARPORT_STATUS_SELECT
412 | PARPORT_STATUS_PAPEROUT)) {
413 /* Timeout */
414 parport_frob_control (port,
415 PARPORT_CONTROL_SELECT
416 | PARPORT_CONTROL_AUTOFD,
417 PARPORT_CONTROL_SELECT);
418 DPRINTK (KERN_DEBUG
419 "%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
420 port->name, parport_read_status (port));
421 port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
422 return -1; /* Not IEEE1284 compliant */
423 }
424
425 /* Event 3: Set nStrobe low */
426 parport_frob_control (port,
427 PARPORT_CONTROL_STROBE,
428 PARPORT_CONTROL_STROBE);
429
430 /* Event 4: Set nStrobe and nAutoFd high */
431 udelay (5);
432 parport_frob_control (port,
433 PARPORT_CONTROL_STROBE
434 | PARPORT_CONTROL_AUTOFD,
435 0);
436
437 /* Event 6: nAck goes high */
438 if (parport_wait_peripheral (port,
439 PARPORT_STATUS_ACK,
440 PARPORT_STATUS_ACK)) {
441 /* This shouldn't really happen with a compliant device. */
442 DPRINTK (KERN_DEBUG
443 "%s: Mode 0x%02x not supported? (0x%02x)\n",
444 port->name, mode, port->ops->read_status (port));
445 parport_ieee1284_terminate (port);
446 return 1;
447 }
448
449 xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
450
451 /* xflag should be high for all modes other than nibble (0). */
452 if (mode && !xflag) {
453 /* Mode not supported. */
454 DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
455 port->name, mode);
456 parport_ieee1284_terminate (port);
457 return 1;
458 }
459
460 /* More to do if we've requested extensibility link. */
461 if (mode & IEEE1284_EXT_LINK) {
462 m = mode & 0x7f;
463 udelay (1);
464 parport_write_data (port, m);
465 udelay (1);
466
467 /* Event 51: Set nStrobe low */
468 parport_frob_control (port,
469 PARPORT_CONTROL_STROBE,
470 PARPORT_CONTROL_STROBE);
471
472 /* Event 52: nAck goes low */
473 if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
474 /* This peripheral is _very_ slow. */
475 DPRINTK (KERN_DEBUG
476 "%s: Event 52 didn't happen\n",
477 port->name);
478 parport_ieee1284_terminate (port);
479 return 1;
480 }
481
482 /* Event 53: Set nStrobe high */
483 parport_frob_control (port,
484 PARPORT_CONTROL_STROBE,
485 0);
486
487 /* Event 55: nAck goes high */
488 if (parport_wait_peripheral (port,
489 PARPORT_STATUS_ACK,
490 PARPORT_STATUS_ACK)) {
491 /* This shouldn't really happen with a compliant
492 * device. */
493 DPRINTK (KERN_DEBUG
494 "%s: Mode 0x%02x not supported? (0x%02x)\n",
495 port->name, mode,
496 port->ops->read_status (port));
497 parport_ieee1284_terminate (port);
498 return 1;
499 }
500
501 /* Event 54: Peripheral sets XFlag to reflect support */
502 xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
503
504 /* xflag should be high. */
505 if (!xflag) {
506 /* Extended mode not supported. */
507 DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not "
508 "supported\n", port->name, mode);
509 parport_ieee1284_terminate (port);
510 return 1;
511 }
512
513 /* Any further setup is left to the caller. */
514 }
515
516 /* Mode is supported */
517 DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
518 port->ieee1284.mode = mode;
519
520 /* But ECP is special */
521 if (!(mode & IEEE1284_EXT_LINK) && (m & IEEE1284_MODE_ECP)) {
522 port->ieee1284.phase = IEEE1284_PH_ECP_SETUP;
523
524 /* Event 30: Set nAutoFd low */
525 parport_frob_control (port,
526 PARPORT_CONTROL_AUTOFD,
527 PARPORT_CONTROL_AUTOFD);
528
529 /* Event 31: PError goes high. */
530 r = parport_wait_peripheral (port,
531 PARPORT_STATUS_PAPEROUT,
532 PARPORT_STATUS_PAPEROUT);
533 if (r) {
534 DPRINTK (KERN_INFO "%s: Timeout at event 31\n",
535 port->name);
536 }
537
538 port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
539 DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
540 port->name);
541 } else switch (mode) {
542 case IEEE1284_MODE_NIBBLE:
543 case IEEE1284_MODE_BYTE:
544 port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
545 break;
546 default:
547 port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
548 }
549
550
551 return 0;
552#endif /* IEEE1284 support */
553}
554
555/* Acknowledge that the peripheral has data available.
556 * Events 18-20, in order to get from Reverse Idle phase
557 * to Host Busy Data Available.
558 * This will most likely be called from an interrupt.
559 * Returns zero if data was available.
560 */
561#ifdef CONFIG_PARPORT_1284
562static int parport_ieee1284_ack_data_avail (struct parport *port)
563{
564 if (parport_read_status (port) & PARPORT_STATUS_ERROR)
565 /* Event 18 didn't happen. */
566 return -1;
567
568 /* Event 20: nAutoFd goes high. */
569 port->ops->frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
570 port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
571 return 0;
572}
573#endif /* IEEE1284 support */
574
575/* Handle an interrupt. */
576void parport_ieee1284_interrupt (int which, void *handle, struct pt_regs *regs)
577{
578 struct parport *port = handle;
579 parport_ieee1284_wakeup (port);
580
581#ifdef CONFIG_PARPORT_1284
582 if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) {
583 /* An interrupt in this phase means that data
584 * is now available. */
585 DPRINTK (KERN_DEBUG "%s: Data available\n", port->name);
586 parport_ieee1284_ack_data_avail (port);
587 }
588#endif /* IEEE1284 support */
589}
590
591/**
592 * parport_write - write a block of data to a parallel port
593 * @port: port to write to
594 * @buffer: data buffer (in kernel space)
595 * @len: number of bytes of data to transfer
596 *
597 * This will write up to @len bytes of @buffer to the port
598 * specified, using the IEEE 1284 transfer mode most recently
599 * negotiated to (using parport_negotiate()), as long as that
600 * mode supports forward transfers (host to peripheral).
601 *
602 * It is the caller's responsibility to ensure that the first
603 * @len bytes of @buffer are valid.
604 *
605 * This function returns the number of bytes transferred (if zero
606 * or positive), or else an error code.
607 */
608
609ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
610{
611#ifndef CONFIG_PARPORT_1284
612 return port->ops->compat_write_data (port, buffer, len, 0);
613#else
614 ssize_t retval;
615 int mode = port->ieee1284.mode;
616 int addr = mode & IEEE1284_ADDR;
617 size_t (*fn) (struct parport *, const void *, size_t, int);
618
619 /* Ignore the device-ID-request bit and the address bit. */
620 mode &= ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
621
622 /* Use the mode we're in. */
623 switch (mode) {
624 case IEEE1284_MODE_NIBBLE:
625 case IEEE1284_MODE_BYTE:
626 parport_negotiate (port, IEEE1284_MODE_COMPAT);
627 case IEEE1284_MODE_COMPAT:
628 DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n",
629 port->name);
630 fn = port->ops->compat_write_data;
631 break;
632
633 case IEEE1284_MODE_EPP:
634 DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
635 if (addr) {
636 fn = port->ops->epp_write_addr;
637 } else {
638 fn = port->ops->epp_write_data;
639 }
640 break;
641 case IEEE1284_MODE_EPPSWE:
642 DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
643 port->name);
644 if (addr) {
645 fn = parport_ieee1284_epp_write_addr;
646 } else {
647 fn = parport_ieee1284_epp_write_data;
648 }
649 break;
650 case IEEE1284_MODE_ECP:
651 case IEEE1284_MODE_ECPRLE:
652 DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
653 if (addr) {
654 fn = port->ops->ecp_write_addr;
655 } else {
656 fn = port->ops->ecp_write_data;
657 }
658 break;
659
660 case IEEE1284_MODE_ECPSWE:
661 DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
662 port->name);
663 /* The caller has specified that it must be emulated,
664 * even if we have ECP hardware! */
665 if (addr) {
666 fn = parport_ieee1284_ecp_write_addr;
667 } else {
668 fn = parport_ieee1284_ecp_write_data;
669 }
670 break;
671
672 default:
673 DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
674 port->ieee1284.mode);
675 return -ENOSYS;
676 }
677
678 retval = (*fn) (port, buffer, len, 0);
679 DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
680 return retval;
681#endif /* IEEE1284 support */
682}
683
684/**
685 * parport_read - read a block of data from a parallel port
686 * @port: port to read from
687 * @buffer: data buffer (in kernel space)
688 * @len: number of bytes of data to transfer
689 *
690 * This will read up to @len bytes of @buffer to the port
691 * specified, using the IEEE 1284 transfer mode most recently
692 * negotiated to (using parport_negotiate()), as long as that
693 * mode supports reverse transfers (peripheral to host).
694 *
695 * It is the caller's responsibility to ensure that the first
696 * @len bytes of @buffer are available to write to.
697 *
698 * This function returns the number of bytes transferred (if zero
699 * or positive), or else an error code.
700 */
701
702ssize_t parport_read (struct parport *port, void *buffer, size_t len)
703{
704#ifndef CONFIG_PARPORT_1284
705 printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
706 return -ENODEV;
707#else
708 int mode = port->physport->ieee1284.mode;
709 int addr = mode & IEEE1284_ADDR;
710 size_t (*fn) (struct parport *, void *, size_t, int);
711
712 /* Ignore the device-ID-request bit and the address bit. */
713 mode &= ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
714
715 /* Use the mode we're in. */
716 switch (mode) {
717 case IEEE1284_MODE_COMPAT:
718 /* if we can tri-state use BYTE mode instead of NIBBLE mode,
719 * if that fails, revert to NIBBLE mode -- ought to store somewhere
720 * the device's ability to do BYTE mode reverse transfers, so we don't
721 * end up needlessly calling negotiate(BYTE) repeately.. (fb)
722 */
723 if ((port->physport->modes & PARPORT_MODE_TRISTATE) &&
724 !parport_negotiate (port, IEEE1284_MODE_BYTE)) {
725 /* got into BYTE mode OK */
726 DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
727 fn = port->ops->byte_read_data;
728 break;
729 }
730 if (parport_negotiate (port, IEEE1284_MODE_NIBBLE)) {
731 return -EIO;
732 }
733 /* fall through to NIBBLE */
734 case IEEE1284_MODE_NIBBLE:
735 DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name);
736 fn = port->ops->nibble_read_data;
737 break;
738
739 case IEEE1284_MODE_BYTE:
740 DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
741 fn = port->ops->byte_read_data;
742 break;
743
744 case IEEE1284_MODE_EPP:
745 DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
746 if (addr) {
747 fn = port->ops->epp_read_addr;
748 } else {
749 fn = port->ops->epp_read_data;
750 }
751 break;
752 case IEEE1284_MODE_EPPSWE:
753 DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
754 port->name);
755 if (addr) {
756 fn = parport_ieee1284_epp_read_addr;
757 } else {
758 fn = parport_ieee1284_epp_read_data;
759 }
760 break;
761 case IEEE1284_MODE_ECP:
762 case IEEE1284_MODE_ECPRLE:
763 DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
764 fn = port->ops->ecp_read_data;
765 break;
766
767 case IEEE1284_MODE_ECPSWE:
768 DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
769 port->name);
770 fn = parport_ieee1284_ecp_read_data;
771 break;
772
773 default:
774 DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
775 port->physport->ieee1284.mode);
776 return -ENOSYS;
777 }
778
779 return (*fn) (port, buffer, len, 0);
780#endif /* IEEE1284 support */
781}
782
783/**
784 * parport_set_timeout - set the inactivity timeout for a device
785 * @dev: device on a port
786 * @inactivity: inactivity timeout (in jiffies)
787 *
788 * This sets the inactivity timeout for a particular device on a
789 * port. This affects functions like parport_wait_peripheral().
790 * The special value 0 means not to call schedule() while dealing
791 * with this device.
792 *
793 * The return value is the previous inactivity timeout.
794 *
795 * Any callers of parport_wait_event() for this device are woken
796 * up.
797 */
798
799long parport_set_timeout (struct pardevice *dev, long inactivity)
800{
801 long int old = dev->timeout;
802
803 dev->timeout = inactivity;
804
805 if (dev->port->physport->cad == dev)
806 parport_ieee1284_wakeup (dev->port);
807
808 return old;
809}
810
811/* Exported symbols for modules. */
812
813EXPORT_SYMBOL(parport_negotiate);
814EXPORT_SYMBOL(parport_write);
815EXPORT_SYMBOL(parport_read);
816EXPORT_SYMBOL(parport_wait_peripheral);
817EXPORT_SYMBOL(parport_wait_event);
818EXPORT_SYMBOL(parport_set_timeout);
819EXPORT_SYMBOL(parport_ieee1284_interrupt);