Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
index f65c76d..97d9b3e 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
@@ -37,6 +37,12 @@
Definition: the identifier of the remote processor in the smd channel
allocation table
+- qcom,remote-pid:
+ Usage: optional
+ Value type: <u32>
+ Definition: the identifier for the remote processor as known by the rest
+ of the system.
+
= SMD DEVICES
In turn, subnodes of the "edges" represent devices tied to SMD channels on that
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index a5863ac..540a0ad 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -116,6 +116,21 @@
min-microvolt = <1100000>;
max-microvolt = <2700000>;
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ /* Correspond to 500MHz at freq_table */
+ cooling-device = <&cpu0 5 5>;
+ };
+ map1 {
+ /* Correspond to 200MHz at freq_table */
+ cooling-device = <&cpu0 8 8>;
+ };
+ };
+ };
+ };
};
&adc {
@@ -141,6 +156,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&exynos_usbphy {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index baa9b2f..41a5faf 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -107,6 +107,21 @@
min-microvolt = <1100000>;
max-microvolt = <2700000>;
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 500MHz */
+ cooling-device = <&cpu0 5 5>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 8 8>;
+ };
+ };
+ };
+ };
};
&adc {
@@ -132,6 +147,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&exynos_usbphy {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2db9943..033def4 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -53,6 +53,22 @@
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
+ clocks = <&cmu CLK_ARM_CLK>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
+
+ operating-points = <
+ 1000000 1150000
+ 900000 1112500
+ 800000 1075000
+ 700000 1037500
+ 600000 1000000
+ 500000 962500
+ 400000 925000
+ 300000 887500
+ 200000 850000
+ 100000 850000
+ >;
};
cpu1: cpu@1 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b0d52b1..98c0a36 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -702,6 +702,7 @@
clocks = <&clock CLK_JPEG>;
clock-names = "jpeg";
power-domains = <&pd_cam>;
+ iommus = <&sysmmu_jpeg>;
};
hdmi: hdmi@12D00000 {
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index d9c8efee..5389011 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -30,6 +30,9 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
@@ -39,6 +42,84 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <200000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <200000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <200000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <200000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1087500>;
+ clock-latency-ns = <200000>;
+ };
+ opp09 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <200000>;
+ };
+ opp10 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1187500>;
+ clock-latency-ns = <200000>;
+ };
+ opp11 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <200000>;
+ };
+ opp12 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1287500>;
+ clock-latency-ns = <200000>;
+ };
+ opp13 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1350000>;
+ clock-latency-ns = <200000>;
+ turbo-mode;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ca7d168..db52841 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -107,6 +107,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
/* RSTN signal for eMMC */
&sd1_cd {
samsung,pin-pud = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 44684e5..8632f35 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "exynos4412-odroid-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Hardkernel ODROID-U3 board based on Exynos4412";
@@ -61,3 +62,10 @@
"Speakers", "SPKL",
"Speakers", "SPKR";
};
+
+&spi_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 84c7631..9d528af 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -78,6 +78,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&fimd {
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 8848400..2a1ebb7 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -288,6 +288,10 @@
status = "okay";
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&csis_0 {
status = "okay";
vddcore-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index b78ada7..ca0e3c1 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -30,6 +30,9 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
@@ -39,18 +42,98 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@A02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@A03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <200000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <200000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <200000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <200000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1087500>;
+ clock-latency-ns = <200000>;
+ };
+ opp09 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <200000>;
+ };
+ opp10 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1187500>;
+ clock-latency-ns = <200000>;
+ };
+ opp11 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <200000>;
+ };
+ opp12 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1287500>;
+ clock-latency-ns = <200000>;
+ };
+ opp13 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1350000>;
+ clock-latency-ns = <200000>;
+ turbo-mode;
};
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7e728a1..db3f65f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -117,6 +117,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&dp {
status = "okay";
samsung,color-space = <0>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 4fe186d..15aea76 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -74,6 +74,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&dp {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index b7f4122..0720caab 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -235,6 +235,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&dp {
status = "okay";
pinctrl-names = "default";
@@ -688,6 +692,7 @@
status = "okay";
samsung,spi-src-clk = <0>;
num-cs = <1>;
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
};
&usbdrd_dwc3 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index d03f9b8..c1edd6d 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -65,6 +65,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&dp {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4a1f883..b24610e 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -62,6 +62,28 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <140000>;
+
+ operating-points = <
+ 1700000 1300000
+ 1600000 1250000
+ 1500000 1225000
+ 1400000 1200000
+ 1300000 1150000
+ 1200000 1125000
+ 1100000 1100000
+ 1000000 1075000
+ 900000 1050000
+ 800000 1025000
+ 700000 1012500
+ 600000 1000000
+ 500000 975000
+ 400000 950000
+ 300000 937500
+ 200000 925000
+ >;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
new file mode 100644
index 0000000..b7f60c8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -0,0 +1,81 @@
+/*
+ * SAMSUNG EXYNOS5422 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The
+ * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting
+ * from Cortex-A15 core.
+ *
+ * EXYNOS5422 based board files can include this file to provide cpu ordering
+ * which could boot a cortex-a7 from cpu0.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&cpu0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
+};
+
+&cpu1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
+};
+
+&cpu2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
+};
+
+&cpu3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x103>;
+ clock-frequency = <1000000000>;
+ cci-control-port = <&cci_control0>;
+};
+
+&cpu4 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+ clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
+};
+
+&cpu5 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+ clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
+};
+
+&cpu6 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x2>;
+ clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
+};
+
+&cpu7 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x3>;
+ clock-frequency = <1800000000>;
+ cci-control-port = <&cci_control1>;
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1565667..79ffdfe 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
#include "exynos5422-cpu-thermal.dtsi"
/ {
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 34ccb26..47c0282 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -4,6 +4,14 @@
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+ aliases {
+ serial0 = &gsbi7_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
pinctrl@800000 {
i2c1_pins: i2c1 {
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 88d6655..f3100da 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -10,6 +10,10 @@
serial1 = &gsbi6_serial;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
pinctrl@800000 {
card_detect: card_detect {
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index d484d08..835bdc7 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -6,6 +6,14 @@
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
serial@f991e000 {
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index f7725b9..c9c2b76 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -5,6 +5,14 @@
model = "Qualcomm APQ8084/IFC6540";
compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+ aliases {
+ serial0 = &blsp2_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
serial@f995e000 {
status = "okay";
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
index cb43acf..3016c70 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -5,6 +5,14 @@
model = "Qualcomm APQ 8084-MTP";
compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+ aliases {
+ serial0 = &blsp2_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
serial@f995e000 {
status = "okay";
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 7084010..0554fbd 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -234,7 +234,7 @@
interrupts = <0 208 0>;
};
- serial@f995e000 {
+ blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <0 114 0x0>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 55b2910..d501382 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -4,6 +4,14 @@
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9f727d8..fa69863 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -197,7 +197,7 @@
syscon-tcsr = <&tcsr>;
- serial@16340000 {
+ gsbi4_serial: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index e0883c3..b17f379 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -6,6 +6,14 @@
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
+ aliases {
+ serial0 = &gsbi12_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
gsbi@19c00000 {
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index ef2fe72..e5f7f33 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -98,7 +98,7 @@
syscon-tcsr = <&tcsr>;
- serial@19c40000 {
+ gsbi12_serial: serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index fad71d5..b72a554 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -6,6 +6,14 @@
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+ aliases {
+ serial0 = &gsbi5_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
soc {
gsbi@16400000 {
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2096a94..134cd91 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -157,7 +157,7 @@
syscon-tcsr = <&tcsr>;
- serial@16440000 {
+ gsbi5_serial: serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 9bc72a3..016f9ad 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -6,6 +6,14 @@
model = "Sony Xperia Z1";
compatible = "sony,xperia-honami", "qcom,msm8974";
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory@0 {
reg = <0 0x40000000>, <0x40000000 0x40000000>;
device_type = "memory";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d7c99b8..ab8e572 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -259,7 +259,7 @@
hwlocks = <&tcsr_mutex 3>;
};
- serial@f991e000 {
+ blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <0 108 0x0>;
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 3eaf8fba..1ff2bfa 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -27,6 +27,8 @@
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
CONFIG_VFP=y
@@ -94,6 +96,7 @@
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_TPS65090=y
CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_INA2XX=y
CONFIG_THERMAL=y
@@ -144,6 +147,8 @@
CONFIG_SND_SOC=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_SNOW=y
+CONFIG_SND_SOC_ODROIDX2=y
+CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f84471d..03deb7f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -362,6 +362,7 @@
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
+CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
CONFIG_RCAR_THERMAL=y
@@ -410,7 +411,9 @@
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=m
+CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
@@ -509,8 +512,6 @@
CONFIG_AB8500_USB=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_OMAP_USB3=y
-CONFIG_SAMSUNG_USB2PHY=y
-CONFIG_SAMSUNG_USB3PHY=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
@@ -635,6 +636,7 @@
CONFIG_TI_AEMIF=y
CONFIG_IIO=y
CONFIG_AT91_ADC=m
+CONFIG_EXYNOS_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
CONFIG_PWM=y
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4c4858c..3a10f1a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -15,6 +15,7 @@
select ARM_AMBA
select ARM_GIC
select COMMON_CLK_SAMSUNG
+ select EXYNOS_THERMAL
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -24,6 +25,7 @@
select PM_GENERIC_DOMAINS if PM
select S5P_DEV_MFC
select SRAM
+ select THERMAL
select MFD_SYSCON
help
Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 5f8ddcd..1c47aee 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -225,7 +225,11 @@
}
static const struct of_device_id exynos_cpufreq_matches[] = {
+ { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
+ { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
+ { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
+ { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
{ /* sentinel */ }
};
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 251f48d..7f370d3 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1398,6 +1398,45 @@
{ 0 },
};
+static const struct exynos_cpuclk_cfg_data e4212_armclk_d[] __initconst = {
+ { 1500000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), },
+ { 1400000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), },
+ { 1300000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), },
+ { 1200000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), },
+ { 1100000, E4210_CPU_DIV0(2, 1, 4, 0, 6, 3), E4210_CPU_DIV1(2, 4), },
+ { 1000000, E4210_CPU_DIV0(1, 1, 4, 0, 5, 2), E4210_CPU_DIV1(2, 4), },
+ { 900000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), },
+ { 800000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), },
+ { 700000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 600000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 500000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 400000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 300000, E4210_CPU_DIV0(1, 1, 2, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+ { 200000, E4210_CPU_DIV0(1, 1, 1, 0, 3, 1), E4210_CPU_DIV1(2, 3), },
+ { 0 },
+};
+
+#define E4412_CPU_DIV1(cores, hpm, copy) \
+ (((cores) << 8) | ((hpm) << 4) | ((copy) << 0))
+
+static const struct exynos_cpuclk_cfg_data e4412_armclk_d[] __initconst = {
+ { 1500000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4412_CPU_DIV1(7, 0, 6), },
+ { 1400000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4412_CPU_DIV1(6, 0, 6), },
+ { 1300000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4412_CPU_DIV1(6, 0, 5), },
+ { 1200000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4412_CPU_DIV1(5, 0, 5), },
+ { 1100000, E4210_CPU_DIV0(2, 1, 4, 0, 6, 3), E4412_CPU_DIV1(5, 0, 4), },
+ { 1000000, E4210_CPU_DIV0(1, 1, 4, 0, 5, 2), E4412_CPU_DIV1(4, 0, 4), },
+ { 900000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4412_CPU_DIV1(4, 0, 3), },
+ { 800000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4412_CPU_DIV1(3, 0, 3), },
+ { 700000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(3, 0, 3), },
+ { 600000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(2, 0, 3), },
+ { 500000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(2, 0, 3), },
+ { 400000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(1, 0, 3), },
+ { 300000, E4210_CPU_DIV0(1, 1, 2, 0, 4, 2), E4412_CPU_DIV1(1, 0, 3), },
+ { 200000, E4210_CPU_DIV0(1, 1, 1, 0, 3, 1), E4412_CPU_DIV1(0, 0, 3), },
+ { 0 },
+};
+
/* register exynos4 clocks */
static void __init exynos4_clk_init(struct device_node *np,
enum exynos4_soc soc)
@@ -1491,6 +1530,17 @@
samsung_clk_register_fixed_factor(ctx,
exynos4x12_fixed_factor_clks,
ARRAY_SIZE(exynos4x12_fixed_factor_clks));
+ if (of_machine_is_compatible("samsung,exynos4412")) {
+ exynos_register_cpu_clock(ctx, CLK_ARM_CLK, "armclk",
+ mout_core_p4x12[0], mout_core_p4x12[1], 0x14200,
+ e4412_armclk_d, ARRAY_SIZE(e4412_armclk_d),
+ CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1);
+ } else {
+ exynos_register_cpu_clock(ctx, CLK_ARM_CLK, "armclk",
+ mout_core_p4x12[0], mout_core_p4x12[1], 0x14200,
+ e4212_armclk_d, ARRAY_SIZE(e4212_armclk_d),
+ CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1);
+ }
}
samsung_clk_register_alias(ctx, exynos4_aliases,
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 77aa34e..5f498d9 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -24,55 +24,6 @@
This add the CPUfreq driver support for Versatile Express
big.LITTLE platforms using SPC for power management.
-
-config ARM_EXYNOS_CPUFREQ
- tristate "SAMSUNG EXYNOS CPUfreq Driver"
- depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
- depends on THERMAL
- help
- This adds the CPUFreq driver for Samsung EXYNOS platforms.
- Supported SoC versions are:
- Exynos4210, Exynos4212, Exynos4412, and Exynos5250.
-
- If in doubt, say N.
-
-config ARM_EXYNOS4X12_CPUFREQ
- bool "SAMSUNG EXYNOS4x12"
- depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
- depends on ARM_EXYNOS_CPUFREQ
- default y
- help
- This adds the CPUFreq driver for Samsung EXYNOS4X12
- SoC (EXYNOS4212 or EXYNOS4412).
-
- If in doubt, say N.
-
-config ARM_EXYNOS5250_CPUFREQ
- bool "SAMSUNG EXYNOS5250"
- depends on SOC_EXYNOS5250
- depends on ARM_EXYNOS_CPUFREQ
- default y
- help
- This adds the CPUFreq driver for Samsung EXYNOS5250
- SoC.
-
- If in doubt, say N.
-
-config ARM_EXYNOS_CPU_FREQ_BOOST_SW
- bool "EXYNOS Frequency Overclocking - Software"
- depends on ARM_EXYNOS_CPUFREQ && THERMAL
- select CPU_FREQ_BOOST_SW
- select EXYNOS_THERMAL
- help
- This driver supports software managed overclocking (BOOST).
- It allows usage of special frequencies for Samsung Exynos
- processors if thermal conditions are appropriate.
-
- It requires, for safe operation, thermal framework with properly
- defined trip points.
-
- If in doubt, say N.
-
config ARM_EXYNOS5440_CPUFREQ
tristate "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 60a57ca..4134038 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -52,10 +52,6 @@
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o
-arm-exynos-cpufreq-y := exynos-cpufreq.o
-arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
-arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
deleted file mode 100644
index fa3dd84..0000000
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - CPU frequency scaling support for EXYNOS series
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <linux/cpufreq.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/cpu_cooling.h>
-#include <linux/cpu.h>
-
-#include "exynos-cpufreq.h"
-
-static struct exynos_dvfs_info *exynos_info;
-static struct thermal_cooling_device *cdev;
-static struct regulator *arm_regulator;
-static unsigned int locking_frequency;
-
-static int exynos_cpufreq_get_index(unsigned int freq)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- struct cpufreq_frequency_table *pos;
-
- cpufreq_for_each_entry(pos, freq_table)
- if (pos->frequency == freq)
- break;
-
- if (pos->frequency == CPUFREQ_TABLE_END)
- return -EINVAL;
-
- return pos - freq_table;
-}
-
-static int exynos_cpufreq_scale(unsigned int target_freq)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- unsigned int *volt_table = exynos_info->volt_table;
- struct cpufreq_policy *policy = cpufreq_cpu_get(0);
- unsigned int arm_volt, safe_arm_volt = 0;
- unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
- struct device *dev = exynos_info->dev;
- unsigned int old_freq;
- int index, old_index;
- int ret = 0;
-
- old_freq = policy->cur;
-
- /*
- * The policy max have been changed so that we cannot get proper
- * old_index with cpufreq_frequency_table_target(). Thus, ignore
- * policy and get the index from the raw frequency table.
- */
- old_index = exynos_cpufreq_get_index(old_freq);
- if (old_index < 0) {
- ret = old_index;
- goto out;
- }
-
- index = exynos_cpufreq_get_index(target_freq);
- if (index < 0) {
- ret = index;
- goto out;
- }
-
- /*
- * ARM clock source will be changed APLL to MPLL temporary
- * To support this level, need to control regulator for
- * required voltage level
- */
- if (exynos_info->need_apll_change != NULL) {
- if (exynos_info->need_apll_change(old_index, index) &&
- (freq_table[index].frequency < mpll_freq_khz) &&
- (freq_table[old_index].frequency < mpll_freq_khz))
- safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
- }
- arm_volt = volt_table[index];
-
- /* When the new frequency is higher than current frequency */
- if ((target_freq > old_freq) && !safe_arm_volt) {
- /* Firstly, voltage up to increase frequency */
- ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- arm_volt);
- return ret;
- }
- }
-
- if (safe_arm_volt) {
- ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
- safe_arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- safe_arm_volt);
- return ret;
- }
- }
-
- exynos_info->set_freq(old_index, index);
-
- /* When the new frequency is lower than current frequency */
- if ((target_freq < old_freq) ||
- ((target_freq > old_freq) && safe_arm_volt)) {
- /* down the voltage after frequency change */
- ret = regulator_set_voltage(arm_regulator, arm_volt,
- arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- arm_volt);
- goto out;
- }
- }
-
-out:
- cpufreq_cpu_put(policy);
-
- return ret;
-}
-
-static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
-{
- return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency);
-}
-
-static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- policy->clk = exynos_info->cpu_clk;
- policy->suspend_freq = locking_frequency;
- return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
-}
-
-static struct cpufreq_driver exynos_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = exynos_target,
- .get = cpufreq_generic_get,
- .init = exynos_cpufreq_cpu_init,
- .name = "exynos_cpufreq",
- .attr = cpufreq_generic_attr,
-#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
- .boost_supported = true,
-#endif
-#ifdef CONFIG_PM
- .suspend = cpufreq_generic_suspend,
-#endif
-};
-
-static int exynos_cpufreq_probe(struct platform_device *pdev)
-{
- struct device_node *cpu0;
- int ret = -EINVAL;
-
- exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
- if (!exynos_info)
- return -ENOMEM;
-
- exynos_info->dev = &pdev->dev;
-
- if (of_machine_is_compatible("samsung,exynos4212")) {
- exynos_info->type = EXYNOS_SOC_4212;
- ret = exynos4x12_cpufreq_init(exynos_info);
- } else if (of_machine_is_compatible("samsung,exynos4412")) {
- exynos_info->type = EXYNOS_SOC_4412;
- ret = exynos4x12_cpufreq_init(exynos_info);
- } else if (of_machine_is_compatible("samsung,exynos5250")) {
- exynos_info->type = EXYNOS_SOC_5250;
- ret = exynos5250_cpufreq_init(exynos_info);
- } else {
- pr_err("%s: Unknown SoC type\n", __func__);
- ret = -ENODEV;
- }
-
- if (ret)
- goto err_vdd_arm;
-
- if (exynos_info->set_freq == NULL) {
- dev_err(&pdev->dev, "No set_freq function (ERR)\n");
- ret = -EINVAL;
- goto err_vdd_arm;
- }
-
- arm_regulator = regulator_get(NULL, "vdd_arm");
- if (IS_ERR(arm_regulator)) {
- dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
- ret = -EINVAL;
- goto err_vdd_arm;
- }
-
- /* Done here as we want to capture boot frequency */
- locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
-
- ret = cpufreq_register_driver(&exynos_driver);
- if (ret)
- goto err_cpufreq_reg;
-
- cpu0 = of_get_cpu_node(0, NULL);
- if (!cpu0) {
- pr_err("failed to find cpu0 node\n");
- return 0;
- }
-
- if (of_find_property(cpu0, "#cooling-cells", NULL)) {
- cdev = of_cpufreq_cooling_register(cpu0,
- cpu_present_mask);
- if (IS_ERR(cdev))
- pr_err("running cpufreq without cooling device: %ld\n",
- PTR_ERR(cdev));
- }
-
- return 0;
-
-err_cpufreq_reg:
- dev_err(&pdev->dev, "failed to register cpufreq driver\n");
- regulator_put(arm_regulator);
-err_vdd_arm:
- kfree(exynos_info);
- return ret;
-}
-
-static struct platform_driver exynos_cpufreq_platdrv = {
- .driver = {
- .name = "exynos-cpufreq",
- },
- .probe = exynos_cpufreq_probe,
-};
-module_platform_driver(exynos_cpufreq_platdrv);
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
deleted file mode 100644
index a3855e4..0000000
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - CPUFreq support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum cpufreq_level_index {
- L0, L1, L2, L3, L4,
- L5, L6, L7, L8, L9,
- L10, L11, L12, L13, L14,
- L15, L16, L17, L18, L19,
- L20,
-};
-
-enum exynos_soc_type {
- EXYNOS_SOC_4212,
- EXYNOS_SOC_4412,
- EXYNOS_SOC_5250,
-};
-
-#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
- { \
- .freq = (f) * 1000, \
- .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \
- (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \
- .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
- .mps = ((m) << 16 | (p) << 8 | (s)), \
- }
-
-struct apll_freq {
- unsigned int freq;
- u32 clk_div_cpu0;
- u32 clk_div_cpu1;
- u32 mps;
-};
-
-struct exynos_dvfs_info {
- enum exynos_soc_type type;
- struct device *dev;
- unsigned long mpll_freq_khz;
- unsigned int pll_safe_idx;
- struct clk *cpu_clk;
- unsigned int *volt_table;
- struct cpufreq_frequency_table *freq_table;
- void (*set_freq)(unsigned int, unsigned int);
- bool (*need_apll_change)(unsigned int, unsigned int);
- void __iomem *cmu_regs;
-};
-
-#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
-extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
-#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ
-extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
-#define EXYNOS4_CLKSRC_CPU 0x14200
-#define EXYNOS4_CLKMUX_STATCPU 0x14400
-
-#define EXYNOS4_CLKDIV_CPU 0x14500
-#define EXYNOS4_CLKDIV_CPU1 0x14504
-#define EXYNOS4_CLKDIV_STATCPU 0x14600
-#define EXYNOS4_CLKDIV_STATCPU1 0x14604
-
-#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
-#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
-
-#define EXYNOS5_APLL_LOCK 0x00000
-#define EXYNOS5_APLL_CON0 0x00100
-#define EXYNOS5_CLKMUX_STATCPU 0x00400
-#define EXYNOS5_CLKDIV_CPU0 0x00500
-#define EXYNOS5_CLKDIV_CPU1 0x00504
-#define EXYNOS5_CLKDIV_STATCPU0 0x00600
-#define EXYNOS5_CLKDIV_STATCPU1 0x00604
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
deleted file mode 100644
index 9e78a85..0000000
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4X12 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos4x12_volt_table[] = {
- 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
- 1000000, 987500, 975000, 950000, 925000, 900000, 900000
-};
-
-static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
- {CPUFREQ_BOOST_FREQ, L0, 1500 * 1000},
- {0, L1, 1400 * 1000},
- {0, L2, 1300 * 1000},
- {0, L3, 1200 * 1000},
- {0, L4, 1100 * 1000},
- {0, L5, 1000 * 1000},
- {0, L6, 900 * 1000},
- {0, L7, 800 * 1000},
- {0, L8, 700 * 1000},
- {0, L9, 600 * 1000},
- {0, L10, 500 * 1000},
- {0, L11, 400 * 1000},
- {0, L12, 300 * 1000},
- {0, L13, 200 * 1000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq *apll_freq_4x12;
-
-static struct apll_freq apll_freq_4212[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
-};
-
-static struct apll_freq apll_freq_4412[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
- * clock divider for COPY, HPM, CORES
- * PLL M, P, S
- */
- APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
- APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
- APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
- APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
- APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
- APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
- APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
- APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
- APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
- APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
- APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
- APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
-};
-
-static void exynos4x12_set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_4x12[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
- & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_4x12[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
- } while (tmp != 0x0);
-}
-
-static void exynos4x12_set_apll(unsigned int index)
-{
- unsigned int tmp, freq = apll_freq_4x12[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
- >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
- tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
- } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4x12_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- exynos4x12_set_clkdiv(new_index);
- exynos4x12_set_apll(new_index);
- } else if (old_index < new_index) {
- exynos4x12_set_apll(new_index);
- exynos4x12_set_clkdiv(new_index);
- }
-}
-
-int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
-{
- struct device_node *np;
- unsigned long rate;
-
- /*
- * HACK: This is a temporary workaround to get access to clock
- * controller registers directly and remove static mappings and
- * dependencies on platform headers. It is necessary to enable
- * Exynos multi-platform support and will be removed together with
- * this whole driver as soon as Exynos gets migrated to use
- * cpufreq-dt driver.
- */
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
- if (!np) {
- pr_err("%s: failed to find clock controller DT node\n",
- __func__);
- return -ENODEV;
- }
-
- info->cmu_regs = of_iomap(np, 0);
- if (!info->cmu_regs) {
- pr_err("%s: failed to map CMU registers\n", __func__);
- return -EFAULT;
- }
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "moutcore");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- if (info->type == EXYNOS_SOC_4212)
- apll_freq_4x12 = apll_freq_4212;
- else
- apll_freq_4x12 = apll_freq_4412;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L7;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos4x12_volt_table;
- info->freq_table = exynos4x12_freq_table;
- info->set_freq = exynos4x12_set_frequency;
-
- cpufreq = info;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_debug("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
deleted file mode 100644
index 3eafdc7..0000000
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS5250 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos5250_volt_table[] = {
- 1300000, 1250000, 1225000, 1200000, 1150000,
- 1125000, 1100000, 1075000, 1050000, 1025000,
- 1012500, 1000000, 975000, 950000, 937500,
- 925000
-};
-
-static struct cpufreq_frequency_table exynos5250_freq_table[] = {
- {0, L0, 1700 * 1000},
- {0, L1, 1600 * 1000},
- {0, L2, 1500 * 1000},
- {0, L3, 1400 * 1000},
- {0, L4, 1300 * 1000},
- {0, L5, 1200 * 1000},
- {0, L6, 1100 * 1000},
- {0, L7, 1000 * 1000},
- {0, L8, 900 * 1000},
- {0, L9, 800 * 1000},
- {0, L10, 700 * 1000},
- {0, L11, 600 * 1000},
- {0, L12, 500 * 1000},
- {0, L13, 400 * 1000},
- {0, L14, 300 * 1000},
- {0, L15, 200 * 1000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_5250[] = {
- /*
- * values:
- * freq
- * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
- APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
- APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
-};
-
-static void set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_5250[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
- & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_5250[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
- cpu_relax();
-}
-
-static void set_apll(unsigned int index)
-{
- unsigned int tmp;
- unsigned int freq = apll_freq_5250[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
- >> 16);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
- tmp &= (0x7 << 16);
- } while (tmp != (0x1 << 16));
-}
-
-static void exynos5250_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- set_clkdiv(new_index);
- set_apll(new_index);
- } else if (old_index < new_index) {
- set_apll(new_index);
- set_clkdiv(new_index);
- }
-}
-
-int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- struct device_node *np;
- unsigned long rate;
-
- /*
- * HACK: This is a temporary workaround to get access to clock
- * controller registers directly and remove static mappings and
- * dependencies on platform headers. It is necessary to enable
- * Exynos multi-platform support and will be removed together with
- * this whole driver as soon as Exynos gets migrated to use
- * cpufreq-dt driver.
- */
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
- if (!np) {
- pr_err("%s: failed to find clock controller DT node\n",
- __func__);
- return -ENODEV;
- }
-
- info->cmu_regs = of_iomap(np, 0);
- if (!info->cmu_regs) {
- pr_err("%s: failed to map CMU registers\n", __func__);
- return -EFAULT;
- }
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "mout_cpu");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L9;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos5250_volt_table;
- info->freq_table = exynos5250_freq_table;
- info->set_freq = exynos5250_set_frequency;
-
- cpufreq = info;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_err("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c
index d2d2904..9aaf646 100644
--- a/drivers/reset/reset-ath79.c
+++ b/drivers/reset/reset-ath79.c
@@ -89,6 +89,7 @@
if (IS_ERR(ath79_reset->base))
return PTR_ERR(ath79_reset->base);
+ spin_lock_init(&ath79_reset->lock);
ath79_reset->rcdev.ops = &ath79_reset_ops;
ath79_reset->rcdev.owner = THIS_MODULE;
ath79_reset->rcdev.of_node = pdev->dev.of_node;
diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c
index 327adcf..a6155c9 100644
--- a/drivers/soc/qcom/smd.c
+++ b/drivers/soc/qcom/smd.c
@@ -96,6 +96,7 @@
* @smd: handle to qcom_smd
* @of_node: of_node handle for information related to this edge
* @edge_id: identifier of this edge
+ * @remote_pid: identifier of remote processor
* @irq: interrupt for signals on this edge
* @ipc_regmap: regmap handle holding the outgoing ipc register
* @ipc_offset: offset within @ipc_regmap of the register for ipc
@@ -111,6 +112,7 @@
struct qcom_smd *smd;
struct device_node *of_node;
unsigned edge_id;
+ unsigned remote_pid;
int irq;
@@ -310,7 +312,7 @@
SET_TX_CHANNEL_INFO(channel, fHEAD, 0);
SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
SET_TX_CHANNEL_INFO(channel, fSTATE, 1);
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0);
+ SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
SET_TX_CHANNEL_INFO(channel, head, 0);
SET_TX_CHANNEL_INFO(channel, tail, 0);
@@ -572,7 +574,7 @@
* have to scan if the amount of available space in smem have changed
* since last scan.
*/
- available = qcom_smem_get_free_space(edge->edge_id);
+ available = qcom_smem_get_free_space(edge->remote_pid);
if (available != edge->smem_available) {
edge->smem_available = available;
edge->need_rescan = true;
@@ -681,7 +683,7 @@
goto out;
}
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
+ SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0);
ret = wait_event_interruptible(channel->fblockread_event,
qcom_smd_get_tx_avail(channel) >= tlen ||
@@ -689,7 +691,7 @@
if (ret)
goto out;
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0);
+ SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
}
SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
@@ -976,7 +978,8 @@
spin_lock_init(&channel->recv_lock);
init_waitqueue_head(&channel->fblockread_event);
- ret = qcom_smem_get(edge->edge_id, smem_info_item, (void **)&info, &info_size);
+ ret = qcom_smem_get(edge->remote_pid, smem_info_item, (void **)&info,
+ &info_size);
if (ret)
goto free_name_and_channel;
@@ -997,7 +1000,8 @@
goto free_name_and_channel;
}
- ret = qcom_smem_get(edge->edge_id, smem_fifo_item, &fifo_base, &fifo_size);
+ ret = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_base,
+ &fifo_size);
if (ret)
goto free_name_and_channel;
@@ -1041,7 +1045,7 @@
int i;
for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) {
- ret = qcom_smem_get(edge->edge_id,
+ ret = qcom_smem_get(edge->remote_pid,
smem_items[tbl].alloc_tbl_id,
(void **)&alloc_tbl,
NULL);
@@ -1184,6 +1188,10 @@
return -EINVAL;
}
+ edge->remote_pid = QCOM_SMEM_HOST_ANY;
+ key = "qcom,remote-pid";
+ of_property_read_u32(node, key, &edge->remote_pid);
+
syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
if (!syscon_np) {
dev_err(dev, "no qcom,ipc node\n");
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 7c2c324c..5236518 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -258,10 +258,6 @@
size_t alloc_size;
void *p;
- /* We're not going to find it if there's no matching partition */
- if (host >= SMEM_HOST_COUNT || !smem->partitions[host])
- return -ENOENT;
-
phdr = smem->partitions[host];
p = (void *)phdr + sizeof(*phdr);
@@ -371,8 +367,9 @@
if (ret)
return ret;
- ret = qcom_smem_alloc_private(__smem, host, item, size);
- if (ret == -ENOENT)
+ if (host < SMEM_HOST_COUNT && __smem->partitions[host])
+ ret = qcom_smem_alloc_private(__smem, host, item, size);
+ else
ret = qcom_smem_alloc_global(__smem, item, size);
hwspin_unlock_irqrestore(__smem->hwlock, &flags);
@@ -428,10 +425,6 @@
struct smem_private_entry *hdr;
void *p;
- /* We're not going to find it if there's no matching partition */
- if (host >= SMEM_HOST_COUNT || !smem->partitions[host])
- return -ENOENT;
-
phdr = smem->partitions[host];
p = (void *)phdr + sizeof(*phdr);
@@ -484,8 +477,9 @@
if (ret)
return ret;
- ret = qcom_smem_get_private(__smem, host, item, ptr, size);
- if (ret == -ENOENT)
+ if (host < SMEM_HOST_COUNT && __smem->partitions[host])
+ ret = qcom_smem_get_private(__smem, host, item, ptr, size);
+ else
ret = qcom_smem_get_global(__smem, item, ptr, size);
hwspin_unlock_irqrestore(__smem->hwlock, &flags);
diff --git a/include/linux/reset.h b/include/linux/reset.h
index da5602b..7f65f9c 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -74,6 +74,20 @@
return -ENOSYS;
}
+static inline struct reset_control *__must_check reset_control_get(
+ struct device *dev, const char *id)
+{
+ WARN_ON(1);
+ return ERR_PTR(-EINVAL);
+}
+
+static inline struct reset_control *__must_check devm_reset_control_get(
+ struct device *dev, const char *id)
+{
+ WARN_ON(1);
+ return ERR_PTR(-EINVAL);
+}
+
static inline struct reset_control *reset_control_get_optional(
struct device *dev, const char *id)
{