Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Again a set of smaller fixes across several platforms (OMAP, Marvell,
Allwinner, i.MX, etc).
A handful of typo fixes and smaller missing contents from device
trees, with some tweaks to OMAP mach files to deal with CPU feature
print misformatting, potential NULL ptr dereference and one setup
issue with UARTs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
ARM: omap3: Add missing memory node in SOM-LV
arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
arm64: dts: marvell: fix clocksource for CP110 slave SPI0
arm64: dts: marvell: Fix typo in label name on Armada 37xx
ASoC: omap-abe-twl6040: fix typo in bindings documentation
dts: omap5: board-common: enable twl6040 headset jack detection
dts: omap5: board-common: add phandle to reference Palmas gpadc
ARM: OMAP2+: avoid NULL pointer dereference
ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
ARM: dts: omap3: Fix memory node in Torpedo board
ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
ARM: OMAP3: Fix formatting of features printed
ARM: dts: imx53-qsb: Fix regulator constraints
ARM: dts: sun8i: fix the pinmux for UART1
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
similarity index 85%
rename from Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
rename to Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
index fbbacd9..6f28969 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -6,7 +6,7 @@
Required properties:
-- compatible : should be "aspeed,ast2400-bt-bmc"
+- compatible : should be "aspeed,ast2400-ibt-bmc"
- reg: physical address and size of the registers
Optional properties:
@@ -17,7 +17,7 @@
Example:
ibt@1e789140 {
- compatible = "aspeed,ast2400-bt-bmc";
+ compatible = "aspeed,ast2400-ibt-bmc";
reg = <0x1e789140 0x18>;
interrupts = <8>;
};
diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
index fd40c85..462b04e8 100644
--- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -12,7 +12,7 @@
Optional properties:
- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
insertion, removal.
Available audio endpoints for the audio-routing table:
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index dec4b07..3799396 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -64,8 +64,8 @@
};
ldo3_reg: ldo3 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -76,8 +76,8 @@
};
ldo5_reg: ldo5 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
regulator-always-on;
};
@@ -100,14 +100,14 @@
};
ldo9_reg: ldo9 {
- regulator-min-microvolt = <1200000>;
+ regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo10_reg: ldo10 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3650000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 0ff1c2d..26cce4d 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -13,6 +13,11 @@
};
};
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
wl12xx_vmmc: wl12xx_vmmc {
compatible = "regulator-fixed";
regulator-name = "vwl1271";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 731ec37..8f9a69c 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -13,9 +13,9 @@
};
};
- memory@0 {
+ memory@80000000 {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x80000000 0>;
};
leds {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 6365635..4caadb2 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -124,6 +124,7 @@
compatible = "ti,abe-twl6040";
ti,model = "omap5-uevm";
+ ti,jack-detection;
ti,mclk-freq = <19200000>;
ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
ti,backup-battery-charge-high-current;
};
- gpadc {
+ gpadc: gpadc {
compatible = "ti,palmas-gpadc";
interrupts = <18 0
16 0
@@ -475,8 +476,8 @@
smps6_reg: smps6 {
/* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index ef2ff2f..7fb507f 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -74,7 +74,7 @@
/* Low speed expansion connector */
spi0: spi@9844000 {
label = "LS-SPI0";
- cs-gpio = <&pio30 3 0>;
+ cs-gpios = <&pio30 3 0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 48fc24f..300a1bd 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -282,11 +282,15 @@
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a9afeeb..0465338 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -71,6 +71,7 @@
select HAVE_ARM_TWD
select ARM_ERRATA_754322
select ARM_ERRATA_775420
+ select OMAP_INTERCONNECT
config SOC_DRA7XX
bool "TI DRA7XX"
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2abd53a..cc6d9fa 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -205,11 +205,15 @@
#define OMAP3_SHOW_FEATURE(feat) \
if (omap3_has_ ##feat()) \
- printk(#feat" ");
+ n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
static void __init omap3_cpuinfo(void)
{
const char *cpu_name;
+ char buf[64];
+ int n = 0;
+
+ memset(buf, 0, sizeof(buf));
/*
* OMAP3430 and OMAP3530 are assumed to be same.
@@ -241,10 +245,10 @@
cpu_name = "OMAP3503";
}
- sprintf(soc_name, "%s", cpu_name);
+ scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
/* Print verbose information */
- pr_info("%s %s (", soc_name, soc_rev);
+ n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
OMAP3_SHOW_FEATURE(l2cache);
OMAP3_SHOW_FEATURE(iva);
@@ -252,8 +256,10 @@
OMAP3_SHOW_FEATURE(neon);
OMAP3_SHOW_FEATURE(isp);
OMAP3_SHOW_FEATURE(192mhz_clk);
-
- printk(")\n");
+ if (*(buf + n - 1) == ' ')
+ n--;
+ n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
+ pr_info("%s", buf);
}
#define OMAP3_CHECK_FEATURE(status,feat) \
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 62680aa..718981b 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -319,6 +319,9 @@
if (has_uart4) {
en_uart4_mask = OMAP3630_EN_UART4_MASK;
grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+ } else {
+ en_uart4_mask = 0;
+ grpsel_uart4_mask = 0;
}
/* Enable wakeups in PER */
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index cba8cad..cd15dbd 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -87,6 +87,12 @@
return -ENODATA;
}
+ if (!voltdm->volt_data) {
+ pr_err("%s: No voltage data defined for vdd_%s\n",
+ __func__, voltdm->name);
+ return -ENODATA;
+ }
+
/* Adjust voltage to the exact voltage from the OPP table */
for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
if (voltdm->volt_data[i].volt_nominal >= target_volt) {
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index c476253..e9bd587 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -105,7 +105,7 @@
status = "disabled";
};
- nb_perih_clk: nb-periph-clk@13000{
+ nb_periph_clk: nb-periph-clk@13000 {
compatible = "marvell,armada-3700-periph-clock-nb";
reg = <0x13000 0x100>;
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
@@ -113,7 +113,7 @@
#clock-cells = <1>;
};
- sb_perih_clk: sb-periph-clk@18000{
+ sb_periph_clk: sb-periph-clk@18000 {
compatible = "marvell,armada-3700-periph-clock-sb";
reg = <0x18000 0x100>;
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 842fb33..6bf9e24 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -130,8 +130,8 @@
reg = <0x700600 0x50>;
#address-cells = <0x1>;
#size-cells = <0x0>;
- cell-index = <1>;
- clocks = <&cps_syscon0 0 3>;
+ cell-index = <3>;
+ clocks = <&cps_syscon0 1 21>;
status = "disabled";
};
@@ -140,7 +140,7 @@
reg = <0x700680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
- cell-index = <2>;
+ cell-index = <4>;
clocks = <&cps_syscon0 1 21>;
status = "disabled";
};
diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c
index b49e613..fc9e889 100644
--- a/drivers/char/ipmi/bt-bmc.c
+++ b/drivers/char/ipmi/bt-bmc.c
@@ -484,7 +484,7 @@
}
static const struct of_device_id bt_bmc_match[] = {
- { .compatible = "aspeed,ast2400-bt-bmc" },
+ { .compatible = "aspeed,ast2400-ibt-bmc" },
{ },
};
@@ -502,4 +502,4 @@
MODULE_DEVICE_TABLE(of, bt_bmc_match);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alistair Popple <alistair@popple.id.au>");
-MODULE_DESCRIPTION("Linux device interface to the BT interface");
+MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface");