drivers/scsi/isci/core/sci_pool.h - kernel/hikey-linaro - Gitiles

 /*
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
  *
  * GPL LICENSE SUMMARY
  *
  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  * The full GNU General Public License is included in this distribution
  * in the file called LICENSE.GPL.
  *
  * BSD LICENSE
  *
  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *   * Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *   * Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in
  *     the documentation and/or other materials provided with the
  *     distribution.
  *   * Neither the name of Intel Corporation nor the names of its
  *     contributors may be used to endorse or promote products derived
  *     from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /**
  * This file contains the interface to the pool class. This class allows two
  *    different two different priority tasks to insert and remove items from
  *    the free pool. The user of the pool is expected to evaluate the pool
  *    condition empty before a get operation and pool condition full before a
  *    put operation. Methods Provided: - sci_pool_create() -
  *    sci_pool_initialize() - sci_pool_empty() - sci_pool_full() -
  *    sci_pool_get() - sci_pool_put()
  *
  *
  */

 #ifndef _SCI_POOL_H_
 #define _SCI_POOL_H_

 /**
  * SCI_POOL_INCREMENT() -
  *
  * Private operation for the pool
  */
 #define SCI_POOL_INCREMENT(this_pool, index) \
 	(((index) + 1) == (this_pool).size ? 0 : (index) + 1)

 /**
  * SCI_POOL_CREATE() -
  *
  * This creates a pool structure of pool_name. The members in the pool are of
  * type with number of elements equal to size.
  */
 #define SCI_POOL_CREATE(pool_name, type, pool_size) \
 	struct \
 	{ \
 		u32 size; \
 		u32 get; \
 		u32 put; \
 		type array[(pool_size) + 1]; \
 	} pool_name


 /**
  * sci_pool_empty() -
  *
  * This macro evaluates the pool and returns true if the pool is empty. If the
  * pool is empty the user should not perform any get operation on the pool.
  */
 #define sci_pool_empty(this_pool) \
 	((this_pool).get == (this_pool).put)

 /**
  * sci_pool_full() -
  *
  * This macro evaluates the pool and returns true if the pool is full.  If the
  * pool is full the user should not perform any put operation.
  */
 #define sci_pool_full(this_pool) \
 	(SCI_POOL_INCREMENT(this_pool, (this_pool).put) == (this_pool).get)

 /**
  * sci_pool_size() -
  *
  * This macro returns the size of the pool created.  The internal size of the
  * pool is actually 1 larger then necessary in order to ensure get and put
  * pointers can be written simultaneously by different users.  As a result,
  * this macro subtracts 1 from the internal size
  */
 #define sci_pool_size(this_pool) \
 	((this_pool).size - 1)

 /**
  * sci_pool_count() -
  *
  * This macro indicates the number of elements currently contained in the pool.
  */
 #define sci_pool_count(this_pool) \
 	(\
 		sci_pool_empty((this_pool)) \
 		? 0 \
 		: (\
 			sci_pool_full((this_pool)) \
 			? sci_pool_size((this_pool)) \
 			: (\
 				(this_pool).get > (this_pool).put \
 				? ((this_pool).size - (this_pool).get + (this_pool).put) \
 				: ((this_pool).put - (this_pool).get) \
 				) \
 			) \
 	)

 /**
  * sci_pool_initialize() -
  *
  * This macro initializes the pool to an empty condition.
  */
 #define sci_pool_initialize(this_pool) \
 	{ \
 		(this_pool).size = (sizeof((this_pool).array) / sizeof((this_pool).array[0])); \
 		(this_pool).get = 0; \
 		(this_pool).put = 0; \
 	}

 /**
  * sci_pool_get() -
  *
  * This macro will get the next free element from the pool. This should only be
  * called if the pool is not empty.
  */
 #define sci_pool_get(this_pool, my_value) \
 	{ \
 		(my_value) = (this_pool).array[(this_pool).get]; \
 		(this_pool).get = SCI_POOL_INCREMENT((this_pool), (this_pool).get); \
 	}

 /**
  * sci_pool_put() -
  *
  * This macro will put the value into the pool. This should only be called if
  * the pool is not full.
  */
 #define sci_pool_put(this_pool, the_value) \
 	{ \
 		(this_pool).array[(this_pool).put] = (the_value); \
 		(this_pool).put = SCI_POOL_INCREMENT((this_pool), (this_pool).put); \
 	}

 /**
  * sci_pool_erase() -
  *
  * This macro will search the pool and remove any elements in the pool matching
  * the supplied value. This method can only be utilized on pools
  */
 #define sci_pool_erase(this_pool, type, the_value) \
 	{ \
 		type tmp_value;	\
 		u32 index; \
 		u32 element_count = sci_pool_count((this_pool)); \
  \
 		for (index = 0; index < element_count; index++) {	\
 			sci_pool_get((this_pool), tmp_value); \
 			if (tmp_value != (the_value)) \
 				sci_pool_put((this_pool), tmp_value); \
 		} \
 	}

 #endif /* _SCI_POOL_H_ */
	/*
	* This file is provided under a dual BSD/GPLv2 license. When using or
	* redistributing this file, you may do so under either license.
	*
	* GPL LICENSE SUMMARY
	*
	* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
	* The full GNU General Public License is included in this distribution
	* in the file called LICENSE.GPL.
	*
	* BSD LICENSE
	*
	* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name of Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/**
	* This file contains the interface to the pool class. This class allows two
	* different two different priority tasks to insert and remove items from
	* the free pool. The user of the pool is expected to evaluate the pool
	* condition empty before a get operation and pool condition full before a
	* put operation. Methods Provided: - sci_pool_create() -
	* sci_pool_initialize() - sci_pool_empty() - sci_pool_full() -
	* sci_pool_get() - sci_pool_put()
	*
	*
	*/

	#ifndef _SCI_POOL_H_
	#define _SCI_POOL_H_

	/**
	* SCI_POOL_INCREMENT() -
	*
	* Private operation for the pool
	*/
	#define SCI_POOL_INCREMENT(this_pool, index) \
	(((index) + 1) == (this_pool).size ? 0 : (index) + 1)

	/**
	* SCI_POOL_CREATE() -
	*
	* This creates a pool structure of pool_name. The members in the pool are of
	* type with number of elements equal to size.
	*/
	#define SCI_POOL_CREATE(pool_name, type, pool_size) \
	struct \
	{ \
	u32 size; \
	u32 get; \
	u32 put; \
	type array[(pool_size) + 1]; \
	} pool_name


	/**
	* sci_pool_empty() -
	*
	* This macro evaluates the pool and returns true if the pool is empty. If the
	* pool is empty the user should not perform any get operation on the pool.
	*/
	#define sci_pool_empty(this_pool) \
	((this_pool).get == (this_pool).put)

	/**
	* sci_pool_full() -
	*
	* This macro evaluates the pool and returns true if the pool is full. If the
	* pool is full the user should not perform any put operation.
	*/
	#define sci_pool_full(this_pool) \
	(SCI_POOL_INCREMENT(this_pool, (this_pool).put) == (this_pool).get)

	/**
	* sci_pool_size() -
	*
	* This macro returns the size of the pool created. The internal size of the
	* pool is actually 1 larger then necessary in order to ensure get and put
	* pointers can be written simultaneously by different users. As a result,
	* this macro subtracts 1 from the internal size
	*/
	#define sci_pool_size(this_pool) \
	((this_pool).size - 1)

	/**
	* sci_pool_count() -
	*
	* This macro indicates the number of elements currently contained in the pool.
	*/
	#define sci_pool_count(this_pool) \
	(\
	sci_pool_empty((this_pool)) \
	? 0 \
	: (\
	sci_pool_full((this_pool)) \
	? sci_pool_size((this_pool)) \
	: (\
	(this_pool).get > (this_pool).put \
	? ((this_pool).size - (this_pool).get + (this_pool).put) \
	: ((this_pool).put - (this_pool).get) \
	) \
	) \
	)

	/**
	* sci_pool_initialize() -
	*
	* This macro initializes the pool to an empty condition.
	*/
	#define sci_pool_initialize(this_pool) \
	{ \
	(this_pool).size = (sizeof((this_pool).array) / sizeof((this_pool).array[0])); \
	(this_pool).get = 0; \
	(this_pool).put = 0; \
	}

	/**
	* sci_pool_get() -
	*
	* This macro will get the next free element from the pool. This should only be
	* called if the pool is not empty.
	*/
	#define sci_pool_get(this_pool, my_value) \
	{ \
	(my_value) = (this_pool).array[(this_pool).get]; \
	(this_pool).get = SCI_POOL_INCREMENT((this_pool), (this_pool).get); \
	}

	/**
	* sci_pool_put() -
	*
	* This macro will put the value into the pool. This should only be called if
	* the pool is not full.
	*/
	#define sci_pool_put(this_pool, the_value) \
	{ \
	(this_pool).array[(this_pool).put] = (the_value); \
	(this_pool).put = SCI_POOL_INCREMENT((this_pool), (this_pool).put); \
	}

	/**
	* sci_pool_erase() -
	*
	* This macro will search the pool and remove any elements in the pool matching
	* the supplied value. This method can only be utilized on pools
	*/
	#define sci_pool_erase(this_pool, type, the_value) \
	{ \
	type tmp_value; \
	u32 index; \
	u32 element_count = sci_pool_count((this_pool)); \
	\
	for (index = 0; index < element_count; index++) { \
	sci_pool_get((this_pool), tmp_value); \
	if (tmp_value != (the_value)) \
	sci_pool_put((this_pool), tmp_value); \
	} \
	}

	#endif /* _SCI_POOL_H_ */