Merge branch 'pci/bjorn-p2p-bridge-windows' into next
* pci/bjorn-p2p-bridge-windows:
sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
PCI: support sizing P2P bridge I/O windows with 1K granularity
PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
PCI: allow P2P bridge windows starting at PCI bus address zero
Conflicts:
drivers/pci/probe.c
include/linux/pci.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 14bc707..28b4679 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5195,7 +5195,7 @@
M: Bjorn Helgaas <bhelgaas@google.com>
L: linux-pci@vger.kernel.org
Q: http://patchwork.ozlabs.org/project/linux-pci/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/linux.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
S: Supported
F: Documentation/PCI/
F: drivers/pci/
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 1a62963..9816d5a 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -59,15 +59,13 @@
* Quirks.
*/
-static void __init
-quirk_isa_bridge(struct pci_dev *dev)
+static void __devinit quirk_isa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_ISA << 8;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
-static void __init
-quirk_cypress(struct pci_dev *dev)
+static void __devinit quirk_cypress(struct pci_dev *dev)
{
/* The Notorious Cy82C693 chip. */
@@ -106,8 +104,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
/* Called for each device after PCI setup is done. */
-static void __init
-pcibios_fixup_final(struct pci_dev *dev)
+static void __devinit pcibios_fixup_final(struct pci_dev *dev)
{
unsigned int class = dev->class >> 8;
@@ -198,12 +195,6 @@
subsys_initcall(pcibios_init);
-char * __devinit
-pcibios_setup(char *str)
-{
- return str;
-}
-
#ifdef ALPHA_RESTORE_SRM_SETUP
static struct pdev_srm_saved_conf *srm_saved_configs;
@@ -359,7 +350,7 @@
hose, &resources);
hose->bus = bus;
hose->need_domain_info = need_domain_info;
- next_busno = bus->subordinate + 1;
+ next_busno = bus->busn_res.end + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
if (next_busno > 224) {
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 2555250..2b2f25e 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -253,7 +253,7 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
-static void __init pci_fixup_it8152(struct pci_dev *dev)
+static void __devinit pci_fixup_it8152(struct pci_dev *dev)
{
int i;
/* fixup for ITE 8152 devices */
@@ -461,7 +461,7 @@
if (!sys->bus)
panic("PCI: unable to scan bus!");
- busnr = sys->bus->subordinate + 1;
+ busnr = sys->bus->busn_res.end + 1;
list_add(&sys->node, head);
} else {
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index bc0cfda..5b1ee82 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -6,11 +6,6 @@
{
}
-char * __devinit pcibios_setup(char *str)
-{
- return NULL;
-}
-
void pcibios_set_master(struct pci_dev *dev)
{
u8 lat;
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index 6b0b82f..d04ed14 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -268,7 +268,7 @@
d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
}
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
+static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
{
int i;
@@ -287,7 +287,7 @@
}
}
-static void __init pci_fixup_ide_trash(struct pci_dev *d)
+static void __devinit pci_fixup_ide_trash(struct pci_dev *d)
{
int i;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 524df42..81acc7a 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -351,6 +351,8 @@
#endif
INIT_LIST_HEAD(&info.resources);
+ /* insert busn resource at first */
+ pci_add_resource(&info.resources, &root->secondary);
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
&windows);
if (windows) {
@@ -384,7 +386,7 @@
return NULL;
}
- pbus->subordinate = pci_scan_child_bus(pbus);
+ pci_scan_child_bus(pbus);
return pbus;
out3:
@@ -496,15 +498,6 @@
return res->start;
}
-/*
- * PCI BIOS setup, always defaults to SAL interface
- */
-char * __init
-pcibios_setup (char *str)
-{
- return str;
-}
-
int
pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index ed22bfc..bd61512 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -192,11 +192,6 @@
/* No special bus mastering setup handling */
}
-char __devinit *pcibios_setup(char *str)
-{
- return str;
-}
-
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the
@@ -1506,10 +1501,10 @@
pci_free_resource_list(&resources);
return;
}
- bus->secondary = hose->first_busno;
+ bus->busn_res.start = hose->first_busno;
hose->bus = bus;
- hose->last_busno = bus->subordinate;
+ hose->last_busno = bus->busn_res.end;
}
static int __init pcibios_init(void)
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index bf80921..b663402 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -253,7 +253,7 @@
}
/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
{
u8 odlc, ndlc;
(void) pci_read_config_byte(dev, 0x82, &odlc);
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index a1e7e6d..bc13e29 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -495,7 +495,7 @@
}
#ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
{
struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 271e8c4a..6903568 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -102,7 +102,7 @@
need_domain_info = need_domain_info || hose->index;
hose->need_domain_info = need_domain_info;
if (bus) {
- next_busno = bus->subordinate + 1;
+ next_busno = bus->busn_res.end + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
if (next_busno > 224) {
@@ -348,9 +348,9 @@
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
-char * (*pcibios_plat_setup)(char *str) __devinitdata;
+char * (*pcibios_plat_setup)(char *str) __initdata;
-char *__devinit pcibios_setup(char *str)
+char *__init pcibios_setup(char *str)
{
if (pcibios_plat_setup)
return pcibios_plat_setup(str);
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 63be40e..14dc9c8 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -395,17 +395,6 @@
pci_scan_bus(3, &titan_pci_ops, NULL);
}
-/*
- * for parsing "pci=" kernel boot arguments.
- */
-char *pcibios_setup(char *str)
-{
- printk(KERN_INFO "rr: pcibios_setup\n");
- /* Nothing to do for now. */
-
- return str;
-}
-
unsigned __init int pcibios_assign_all_busses(void)
{
/* We want to use the PCI bus detection done by PMON */
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 682efb0..125db32 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -256,7 +256,7 @@
return IRQ_HANDLED;
}
-static int __init
+static int __devinit
txx9_i8259_irq_setup(int irq)
{
int err;
@@ -269,7 +269,7 @@
return err;
}
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
{
int irq; /* PCI/ISA Bridge interrupt */
u8 reg_64;
@@ -398,9 +398,9 @@
return txx9_board_vec->pci_map_irq(dev, slot, pin);
}
-char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+char * (*txx9_board_pcibios_setup)(char *str) __initdata;
-char *__devinit txx9_pcibios_setup(char *str)
+char *__init txx9_pcibios_setup(char *str)
{
if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
return NULL;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 24644ac..6030905 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -139,11 +139,6 @@
}
-char *pcibios_setup(char *str)
-{
- return str;
-}
-
/*
* Called by pci_set_master() - a driver interface.
*
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index ac39e6a..8cccbee 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -30,6 +30,7 @@
int first_busno;
int last_busno;
int self_busno;
+ struct resource busn;
void __iomem *io_base_virt;
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 8e78e93..cf40f2c 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -200,11 +200,6 @@
return device_create_file(&pdev->dev, &dev_attr_devspec);
}
-char __devinit *pcibios_setup(char *str)
-{
- return str;
-}
-
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the
@@ -1637,6 +1632,11 @@
/* Wire up PHB bus resources */
pcibios_setup_phb_resources(hose, &resources);
+ hose->busn.start = hose->first_busno;
+ hose->busn.end = hose->last_busno;
+ hose->busn.flags = IORESOURCE_BUS;
+ pci_add_resource(&resources, &hose->busn);
+
/* Create an empty bus for the toplevel */
bus = pci_create_root_bus(hose->parent, hose->first_busno,
hose->ops, hose, &resources);
@@ -1646,7 +1646,6 @@
pci_free_resource_list(&resources);
return;
}
- bus->secondary = hose->first_busno;
hose->bus = bus;
/* Get probe mode and perform scan */
@@ -1654,13 +1653,14 @@
if (node && ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
pr_debug(" probe mode: %d\n", mode);
- if (mode == PCI_PROBE_DEVTREE) {
- bus->subordinate = hose->last_busno;
+ if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
- }
- if (mode == PCI_PROBE_NORMAL)
- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+ if (mode == PCI_PROBE_NORMAL) {
+ pci_bus_update_busn_res_end(bus, 255);
+ hose->last_busno = pci_scan_child_bus(bus);
+ pci_bus_update_busn_res_end(bus, hose->last_busno);
+ }
/* Platform gets a chance to do some global fixups before
* we proceed to resource allocation
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 94a54f6..4ff190f 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -236,7 +236,7 @@
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
- if (in_bus >= bus->number && in_bus <= bus->subordinate)
+ if (in_bus >= bus->number && in_bus <= bus->busn_res.end)
break;
bus = NULL;
}
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 89dde17..ae5ea5e 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -240,7 +240,7 @@
}
bus->primary = dev->bus->number;
- bus->subordinate = busrange[1];
+ pci_bus_insert_busn_res(bus, busrange[0], busrange[1]);
bus->bridge_ctl = 0;
/* parse ranges property */
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 4d786c2..3e70a20 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -102,7 +102,7 @@
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
+static void __devinit tqm85xx_ti1520_fixup(struct pci_dev *pdev)
{
unsigned int val;
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 1fca663..563aafa8 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -164,7 +164,7 @@
gef_ppc9a_get_vme_is_syscon() ? "yes" : "no");
}
-static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev)
+static void __devinit gef_ppc9a_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 14e0e576..cc6a91a 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -152,7 +152,7 @@
}
-static void __init gef_sbc310_nec_fixup(struct pci_dev *pdev)
+static void __devinit gef_sbc310_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 1638f43..aead6b3 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -141,7 +141,7 @@
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
}
-static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
+static void __devinit gef_sbc610_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index fbdd74d..9cda6a1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -589,7 +589,7 @@
dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
parent = pe->pbus->self;
- count = pe->pbus->subordinate - pe->pbus->secondary + 1;
+ count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
switch(count) {
case 1: bcomp = OpalPciBusAll; break;
case 2: bcomp = OpalPciBus7Bits; break;
@@ -816,11 +816,11 @@
pe->pdev = NULL;
pe->tce32_seg = -1;
pe->mve_number = -1;
- pe->rid = bus->secondary << 8;
+ pe->rid = bus->busn_res.start << 8;
pe->dma_weight = 0;
- pe_info(pe, "Secondary busses %d..%d associated with PE\n",
- bus->secondary, bus->subordinate);
+ pe_info(pe, "Secondary busses %pR associated with PE\n",
+ &bus->busn_res);
if (pnv_ioda_configure_pe(phb, pe)) {
/* XXX What do we do here ? */
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 8b7bafa..3ccebc8 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -121,7 +121,7 @@
if (!num)
return;
pcibios_setup_bus_devices(bus);
- max = bus->secondary;
+ max = bus->busn_res.start;
for (pass=0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 6073288..edbf794 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -36,7 +36,7 @@
static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
{
u8 progif;
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index b0037ce..364b14d 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -104,7 +104,7 @@
#endif /* CONFIG_SYSFS */
-static void __init mv64x60_pci_fixup_early(struct pci_dev *dev)
+static void __devinit mv64x60_pci_fixup_early(struct pci_dev *dev)
{
/*
* Set the host bridge hdr_type to an invalid value so that
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index edeea89..a5fe1b5 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -28,7 +28,7 @@
#include <asm/irq.h>
#include <mach/pci.h>
-static void __init gapspci_fixup_resources(struct pci_dev *dev)
+static void __devinit gapspci_fixup_resources(struct pci_dev *dev)
{
struct pci_channel *p = dev->sysdata;
diff --git a/arch/sh/drivers/pci/fixups-sdk7786.c b/arch/sh/drivers/pci/fixups-sdk7786.c
index 0e18ee3..36eb6fc 100644
--- a/arch/sh/drivers/pci/fixups-sdk7786.c
+++ b/arch/sh/drivers/pci/fixups-sdk7786.c
@@ -23,9 +23,9 @@
* Misconfigurations can be detected through the FPGA via the slot
* resistors to determine card presence. Hotplug remains unsupported.
*/
-static unsigned int slot4en __devinitdata;
+static unsigned int slot4en __initdata;
-char *__devinit pcibios_setup(char *str)
+char *__init pcibios_setup(char *str)
{
if (strcmp(str, "slot4en") == 0) {
slot4en = 1;
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 9d10a3c..40db2d0 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -59,7 +59,7 @@
need_domain_info = need_domain_info || hose->index;
hose->need_domain_info = need_domain_info;
if (bus) {
- next_busno = bus->subordinate + 1;
+ next_busno = bus->busn_res.end + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
if (next_busno > 224) {
@@ -197,11 +197,6 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
-char * __devinit __weak pcibios_setup(char *str)
-{
- return str;
-}
-
static void __init
pcibios_bus_report_status_early(struct pci_channel *hose,
int top_bus, int current_bus,
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index 19f5605..21dcda7 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -91,14 +91,6 @@
}
}
-/*
- * Other archs parse arguments here.
- */
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index fa53d55..065b88c 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -448,7 +448,7 @@
}
bus->primary = dev->bus->number;
- bus->subordinate = busrange[1];
+ pci_bus_insert_busn_res(bus, busrange[0], busrange[1]);
bus->bridge_ctl = 0;
/* parse ranges property, or cook one up by hand for Simba */
@@ -598,6 +598,10 @@
pbm->io_space.start);
pci_add_resource_offset(&resources, &pbm->mem_space,
pbm->mem_space.start);
+ pbm->busn.start = pbm->pci_first_busno;
+ pbm->busn.end = pbm->pci_last_busno;
+ pbm->busn.flags = IORESOURCE_BUS;
+ pci_add_resource(&resources, &pbm->busn);
bus = pci_create_root_bus(parent, pbm->pci_first_busno, pbm->pci_ops,
pbm, &resources);
if (!bus) {
@@ -606,8 +610,6 @@
pci_free_resource_list(&resources);
return NULL;
}
- bus->secondary = pbm->pci_first_busno;
- bus->subordinate = pbm->pci_last_busno;
pci_of_scan_bus(pbm, node, bus);
pci_bus_add_devices(bus);
@@ -660,11 +662,6 @@
return 0;
}
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
/* Platform support for /proc/bus/pci/X/Y mmap()s. */
/* If the user uses a host-bridge as the PCI device, he may use
diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h
index 6beb60d..918a203 100644
--- a/arch/sparc/kernel/pci_impl.h
+++ b/arch/sparc/kernel/pci_impl.h
@@ -97,6 +97,7 @@
/* PBM I/O and Memory space resources. */
struct resource io_space;
struct resource mem_space;
+ struct resource busn;
/* Base of PCI Config space, can be per-PBM or shared. */
unsigned long config_space;
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index ded3f60..521fdf1 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -767,14 +767,6 @@
}
#endif
-/*
- * Other archs parse arguments here.
- */
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
@@ -884,11 +876,6 @@
sparc_config.load_profile_irq = pcic_load_profile_irq;
}
-int pcibios_assign_resource(struct pci_dev *pdev, int resource)
-{
- return -ENXIO;
-}
-
/*
* This probably belongs here rather than ioport.c because
* we do not want this crud linked into SBus kernels.
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index b56d12b..0fdd99d 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -310,6 +310,7 @@
if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
struct pci_controller *controller = &controllers[i];
struct pci_bus *bus;
+ LIST_HEAD(resources);
if (tile_init_irqs(i, controller)) {
pr_err("PCI: Could not initialize IRQs\n");
@@ -327,9 +328,11 @@
* This is inlined in linux/pci.h and calls into
* pci_scan_bus_parented() in probe.c.
*/
- bus = pci_scan_bus(0, controller->ops, controller);
+ pci_add_resource(&resources, &ioport_resource);
+ pci_add_resource(&resources, &iomem_resource);
+ bus = pci_scan_root_bus(NULL, 0, controller->ops, controller, &resources);
controller->root_bus = bus;
- controller->last_busno = bus->subordinate;
+ controller->last_busno = bus->busn_res.end;
}
}
@@ -366,7 +369,7 @@
*/
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
(PCI_SLOT(dev->devfn) == 0)) {
- next_bus = dev->subordinate;
+ next_bus = dev->busn_res.end;
controllers[i].mem_resources[0] =
*next_bus->resource[0];
controllers[i].mem_resources[1] =
@@ -401,16 +404,6 @@
}
/*
- * This can be called from the generic PCI layer, but doesn't need to
- * do anything.
- */
-char __devinit *pcibios_setup(char *str)
-{
- /* Nothing needs to be done. */
- return str;
-}
-
-/*
* This is called from the generic Linux layer.
*/
void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index 2fc2b1b..46cb6c9 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -296,7 +296,7 @@
}
subsys_initcall(pci_common_init);
-char * __devinit pcibios_setup(char *str)
+char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "debug")) {
debug_pci = 1;
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b3a5317..b2652e9 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -100,6 +100,7 @@
extern const struct pci_raw_ops *raw_pci_ops;
extern const struct pci_raw_ops *raw_pci_ext_ops;
+extern const struct pci_raw_ops pci_mmcfg;
extern const struct pci_raw_ops pci_direct_conf1;
extern bool port_cf9_safe;
@@ -135,6 +136,12 @@
extern int __init pci_mmcfg_arch_init(void);
extern void __init pci_mmcfg_arch_free(void);
+extern int __devinit pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
+extern void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
+extern int __devinit pci_mmconfig_insert(struct device *dev,
+ u16 seg, u8 start,
+ u8 end, phys_addr_t addr);
+extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
extern struct list_head pci_mmcfg_list;
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 03920a1..1b27de5 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -512,7 +512,7 @@
#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
/* Set correct numa_node information for AMD NB functions */
-static void __init quirk_amd_nb_node(struct pci_dev *dev)
+static void __devinit quirk_amd_nb_node(struct pci_dev *dev)
{
struct pci_dev *nb_ht;
unsigned int devfn;
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index fc09c27..505acdd6 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -12,8 +12,13 @@
char name[16];
unsigned int res_num;
struct resource *res;
- int busnum;
struct pci_sysdata sd;
+#ifdef CONFIG_PCI_MMCONFIG
+ bool mcfg_added;
+ u16 segment;
+ u8 start_bus;
+ u8 end_bus;
+#endif
};
static bool pci_use_crs = true;
@@ -120,6 +125,81 @@
pci_use_crs ? "nocrs" : "use_crs");
}
+#ifdef CONFIG_PCI_MMCONFIG
+static int __devinit check_segment(u16 seg, struct device *dev, char *estr)
+{
+ if (seg) {
+ dev_err(dev,
+ "%s can't access PCI configuration "
+ "space under this host bridge.\n",
+ estr);
+ return -EIO;
+ }
+
+ /*
+ * Failure in adding MMCFG information is not fatal,
+ * just can't access extended configuration space of
+ * devices under this host bridge.
+ */
+ dev_warn(dev,
+ "%s can't access extended PCI configuration "
+ "space under this bridge.\n",
+ estr);
+
+ return 0;
+}
+
+static int __devinit setup_mcfg_map(struct pci_root_info *info,
+ u16 seg, u8 start, u8 end,
+ phys_addr_t addr)
+{
+ int result;
+ struct device *dev = &info->bridge->dev;
+
+ info->start_bus = start;
+ info->end_bus = end;
+ info->mcfg_added = false;
+
+ /* return success if MMCFG is not in use */
+ if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
+ return 0;
+
+ if (!(pci_probe & PCI_PROBE_MMCONF))
+ return check_segment(seg, dev, "MMCONFIG is disabled,");
+
+ result = pci_mmconfig_insert(dev, seg, start, end, addr);
+ if (result == 0) {
+ /* enable MMCFG if it hasn't been enabled yet */
+ if (raw_pci_ext_ops == NULL)
+ raw_pci_ext_ops = &pci_mmcfg;
+ info->mcfg_added = true;
+ } else if (result != -EEXIST)
+ return check_segment(seg, dev,
+ "fail to add MMCONFIG information,");
+
+ return 0;
+}
+
+static void teardown_mcfg_map(struct pci_root_info *info)
+{
+ if (info->mcfg_added) {
+ pci_mmconfig_delete(info->segment, info->start_bus,
+ info->end_bus);
+ info->mcfg_added = false;
+ }
+}
+#else
+static int __devinit setup_mcfg_map(struct pci_root_info *info,
+ u16 seg, u8 start, u8 end,
+ phys_addr_t addr)
+{
+ return 0;
+}
+static void teardown_mcfg_map(struct pci_root_info *info)
+{
+}
+#endif
+
static acpi_status
resource_to_addr(struct acpi_resource *resource,
struct acpi_resource_address64 *addr)
@@ -234,13 +314,6 @@
}
info->res_num++;
- if (addr.translation_offset)
- dev_info(&info->bridge->dev, "host bridge window %pR "
- "(PCI address [%#llx-%#llx])\n",
- res, res->start - addr.translation_offset,
- res->end - addr.translation_offset);
- else
- dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
return AE_OK;
}
@@ -332,8 +405,11 @@
free_pci_root_info_res(info);
+ teardown_mcfg_map(info);
+
kfree(info);
}
+
static void release_pci_root_info(struct pci_host_bridge *bridge)
{
struct pci_root_info *info = bridge->release_data;
@@ -347,7 +423,9 @@
{
size_t size;
+ sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
info->bridge = device;
+
info->res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
info);
@@ -360,8 +438,6 @@
if (!info->res)
return;
- sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
-
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
info);
}
@@ -373,7 +449,7 @@
int domain = root->segment;
int busnum = root->secondary.start;
LIST_HEAD(resources);
- struct pci_bus *bus;
+ struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
int node;
#ifdef CONFIG_ACPI_NUMA
@@ -426,6 +502,8 @@
} else {
probe_pci_root_info(info, device, busnum, domain);
+ /* insert busn res at first */
+ pci_add_resource(&resources, &root->secondary);
/*
* _CRS with no apertures is normal, so only fall back to
* defaults or native bridge info if we're ignoring _CRS.
@@ -437,10 +515,13 @@
x86_pci_root_bus_resources(busnum, &resources);
}
- bus = pci_create_root_bus(NULL, busnum, &pci_root_ops, sd,
- &resources);
+ if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
+ (u8)root->secondary.end, root->mcfg_addr))
+ bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
+ sd, &resources);
+
if (bus) {
- bus->subordinate = pci_scan_child_bus(bus);
+ pci_scan_child_bus(bus);
pci_set_host_bridge_release(
to_pci_host_bridge(bus->bridge),
release_pci_root_info, info);
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 5aed49b..e9e6ed5 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -121,7 +121,6 @@
link = (reg >> 8) & 0x03;
info = alloc_pci_root_info(min_bus, max_bus, node, link);
- sprintf(info->name, "PCI Bus #%02x", min_bus);
}
/* get the default node and link for left over res */
@@ -300,9 +299,9 @@
int busnum;
struct pci_root_res *root_res;
- busnum = info->bus_min;
- printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n",
- info->bus_min, info->bus_max, info->node, info->link);
+ busnum = info->busn.start;
+ printk(KERN_DEBUG "bus: %pR on node %x link %x\n",
+ &info->busn, info->node, info->link);
list_for_each_entry(root_res, &info->resources, list)
printk(KERN_DEBUG "bus: %02x %pR\n",
busnum, &root_res->res);
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index 306579f..d37e2fe 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -14,7 +14,7 @@
return NULL;
list_for_each_entry(info, &pci_root_infos, list)
- if (info->bus_min == bus)
+ if (info->busn.start == bus)
return info;
return NULL;
@@ -24,6 +24,8 @@
{
struct pci_root_info *info = x86_find_pci_root_info(bus);
struct pci_root_res *root_res;
+ struct pci_host_bridge_window *window;
+ bool found = false;
if (!info)
goto default_resources;
@@ -31,6 +33,16 @@
printk(KERN_DEBUG "PCI: root bus %02x: hardware-probed resources\n",
bus);
+ /* already added by acpi ? */
+ list_for_each_entry(window, resources, list)
+ if (window->res->flags & IORESOURCE_BUS) {
+ found = true;
+ break;
+ }
+
+ if (!found)
+ pci_add_resource(resources, &info->busn);
+
list_for_each_entry(root_res, &info->resources, list) {
struct resource *res;
struct resource *root;
@@ -66,9 +78,13 @@
if (!info)
return info;
+ sprintf(info->name, "PCI Bus #%02x", bus_min);
+
INIT_LIST_HEAD(&info->resources);
- info->bus_min = bus_min;
- info->bus_max = bus_max;
+ info->busn.name = info->name;
+ info->busn.start = bus_min;
+ info->busn.end = bus_max;
+ info->busn.flags = IORESOURCE_BUS;
info->node = node;
info->link = link;
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index 226a466..ff8f65b 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -13,8 +13,7 @@
struct list_head list;
char name[12];
struct list_head resources;
- int bus_min;
- int bus_max;
+ struct resource busn;
int node;
int link;
};
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 0ad990a..720e973f 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -494,7 +494,7 @@
return 0;
}
-char * __devinit pcibios_setup(char *str)
+char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
pci_probe = 0;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 301e325..937bcec 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -17,6 +17,8 @@
#include <linux/bitmap.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/rculist.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
#include <asm/acpi.h>
@@ -24,7 +26,9 @@
#define PREFIX "PCI: "
/* Indicate if the mmcfg resources have been placed into the resource table. */
-static int __initdata pci_mmcfg_resources_inserted;
+static bool pci_mmcfg_running_state;
+static bool pci_mmcfg_arch_init_failed;
+static DEFINE_MUTEX(pci_mmcfg_lock);
LIST_HEAD(pci_mmcfg_list);
@@ -45,24 +49,25 @@
pci_mmconfig_remove(cfg);
}
-static __init void list_add_sorted(struct pci_mmcfg_region *new)
+static __devinit void list_add_sorted(struct pci_mmcfg_region *new)
{
struct pci_mmcfg_region *cfg;
/* keep list sorted by segment and starting bus number */
- list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list) {
if (cfg->segment > new->segment ||
(cfg->segment == new->segment &&
cfg->start_bus >= new->start_bus)) {
- list_add_tail(&new->list, &cfg->list);
+ list_add_tail_rcu(&new->list, &cfg->list);
return;
}
}
- list_add_tail(&new->list, &pci_mmcfg_list);
+ list_add_tail_rcu(&new->list, &pci_mmcfg_list);
}
-static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
- int end, u64 addr)
+static __devinit struct pci_mmcfg_region *pci_mmconfig_alloc(int segment,
+ int start,
+ int end, u64 addr)
{
struct pci_mmcfg_region *new;
struct resource *res;
@@ -79,8 +84,6 @@
new->start_bus = start;
new->end_bus = end;
- list_add_sorted(new);
-
res = &new->res;
res->start = addr + PCI_MMCFG_BUS_OFFSET(start);
res->end = addr + PCI_MMCFG_BUS_OFFSET(end + 1) - 1;
@@ -89,9 +92,25 @@
"PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end);
res->name = new->name;
- printk(KERN_INFO PREFIX "MMCONFIG for domain %04x [bus %02x-%02x] at "
- "%pR (base %#lx)\n", segment, start, end, &new->res,
- (unsigned long) addr);
+ return new;
+}
+
+static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
+ int end, u64 addr)
+{
+ struct pci_mmcfg_region *new;
+
+ new = pci_mmconfig_alloc(segment, start, end, addr);
+ if (new) {
+ mutex_lock(&pci_mmcfg_lock);
+ list_add_sorted(new);
+ mutex_unlock(&pci_mmcfg_lock);
+
+ pr_info(PREFIX
+ "MMCONFIG for domain %04x [bus %02x-%02x] at %pR "
+ "(base %#lx)\n",
+ segment, start, end, &new->res, (unsigned long)addr);
+ }
return new;
}
@@ -100,7 +119,7 @@
{
struct pci_mmcfg_region *cfg;
- list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
if (cfg->segment == segment &&
cfg->start_bus <= bus && bus <= cfg->end_bus)
return cfg;
@@ -343,8 +362,7 @@
name = pci_mmcfg_probes[i].probe();
if (name)
- printk(KERN_INFO PREFIX "%s with MMCONFIG support\n",
- name);
+ pr_info(PREFIX "%s with MMCONFIG support\n", name);
}
/* some end_bus_number is crazy, fix it */
@@ -353,19 +371,8 @@
return !list_empty(&pci_mmcfg_list);
}
-static void __init pci_mmcfg_insert_resources(void)
-{
- struct pci_mmcfg_region *cfg;
-
- list_for_each_entry(cfg, &pci_mmcfg_list, list)
- insert_resource(&iomem_resource, &cfg->res);
-
- /* Mark that the resources have been inserted. */
- pci_mmcfg_resources_inserted = 1;
-}
-
-static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
- void *data)
+static acpi_status __devinit check_mcfg_resource(struct acpi_resource *res,
+ void *data)
{
struct resource *mcfg_res = data;
struct acpi_resource_address64 address;
@@ -401,8 +408,8 @@
return AE_OK;
}
-static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
- void *context, void **rv)
+static acpi_status __devinit find_mboard_resource(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
{
struct resource *mcfg_res = context;
@@ -415,7 +422,7 @@
return AE_OK;
}
-static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
+static int __devinit is_acpi_reserved(u64 start, u64 end, unsigned not_used)
{
struct resource mcfg_res;
@@ -434,13 +441,15 @@
typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
-static int __init is_mmconf_reserved(check_reserved_t is_reserved,
- struct pci_mmcfg_region *cfg, int with_e820)
+static int __ref is_mmconf_reserved(check_reserved_t is_reserved,
+ struct pci_mmcfg_region *cfg,
+ struct device *dev, int with_e820)
{
u64 addr = cfg->res.start;
u64 size = resource_size(&cfg->res);
u64 old_size = size;
- int valid = 0, num_buses;
+ int num_buses;
+ char *method = with_e820 ? "E820" : "ACPI motherboard resources";
while (!is_reserved(addr, addr + size, E820_RESERVED)) {
size >>= 1;
@@ -448,30 +457,76 @@
break;
}
- if (size >= (16UL<<20) || size == old_size) {
- printk(KERN_INFO PREFIX "MMCONFIG at %pR reserved in %s\n",
- &cfg->res,
- with_e820 ? "E820" : "ACPI motherboard resources");
- valid = 1;
+ if (size < (16UL<<20) && size != old_size)
+ return 0;
- if (old_size != size) {
- /* update end_bus */
- cfg->end_bus = cfg->start_bus + ((size>>20) - 1);
- num_buses = cfg->end_bus - cfg->start_bus + 1;
- cfg->res.end = cfg->res.start +
- PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
- snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
- "PCI MMCONFIG %04x [bus %02x-%02x]",
- cfg->segment, cfg->start_bus, cfg->end_bus);
- printk(KERN_INFO PREFIX
- "MMCONFIG for %04x [bus%02x-%02x] "
- "at %pR (base %#lx) (size reduced!)\n",
- cfg->segment, cfg->start_bus, cfg->end_bus,
- &cfg->res, (unsigned long) cfg->address);
- }
+ if (dev)
+ dev_info(dev, "MMCONFIG at %pR reserved in %s\n",
+ &cfg->res, method);
+ else
+ pr_info(PREFIX "MMCONFIG at %pR reserved in %s\n",
+ &cfg->res, method);
+
+ if (old_size != size) {
+ /* update end_bus */
+ cfg->end_bus = cfg->start_bus + ((size>>20) - 1);
+ num_buses = cfg->end_bus - cfg->start_bus + 1;
+ cfg->res.end = cfg->res.start +
+ PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
+ snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
+ "PCI MMCONFIG %04x [bus %02x-%02x]",
+ cfg->segment, cfg->start_bus, cfg->end_bus);
+
+ if (dev)
+ dev_info(dev,
+ "MMCONFIG "
+ "at %pR (base %#lx) (size reduced!)\n",
+ &cfg->res, (unsigned long) cfg->address);
+ else
+ pr_info(PREFIX
+ "MMCONFIG for %04x [bus%02x-%02x] "
+ "at %pR (base %#lx) (size reduced!)\n",
+ cfg->segment, cfg->start_bus, cfg->end_bus,
+ &cfg->res, (unsigned long) cfg->address);
}
- return valid;
+ return 1;
+}
+
+static int __ref pci_mmcfg_check_reserved(struct device *dev,
+ struct pci_mmcfg_region *cfg, int early)
+{
+ if (!early && !acpi_disabled) {
+ if (is_mmconf_reserved(is_acpi_reserved, cfg, dev, 0))
+ return 1;
+
+ if (dev)
+ dev_info(dev, FW_INFO
+ "MMCONFIG at %pR not reserved in "
+ "ACPI motherboard resources\n",
+ &cfg->res);
+ else
+ pr_info(FW_INFO PREFIX
+ "MMCONFIG at %pR not reserved in "
+ "ACPI motherboard resources\n",
+ &cfg->res);
+ }
+
+ /*
+ * e820_all_mapped() is marked as __init.
+ * All entries from ACPI MCFG table have been checked at boot time.
+ * For MCFG information constructed from hotpluggable host bridge's
+ * _CBA method, just assume it's reserved.
+ */
+ if (pci_mmcfg_running_state)
+ return 1;
+
+ /* Don't try to do this check unless configuration
+ type 1 is available. how about type 2 ?*/
+ if (raw_pci_ops)
+ return is_mmconf_reserved(e820_all_mapped, cfg, dev, 1);
+
+ return 0;
}
static void __init pci_mmcfg_reject_broken(int early)
@@ -479,38 +534,14 @@
struct pci_mmcfg_region *cfg;
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
- int valid = 0;
-
- if (!early && !acpi_disabled) {
- valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0);
-
- if (valid)
- continue;
- else
- printk(KERN_ERR FW_BUG PREFIX
- "MMCONFIG at %pR not reserved in "
- "ACPI motherboard resources\n",
- &cfg->res);
+ if (pci_mmcfg_check_reserved(NULL, cfg, early) == 0) {
+ pr_info(PREFIX "not using MMCONFIG\n");
+ free_all_mmcfg();
+ return;
}
-
- /* Don't try to do this check unless configuration
- type 1 is available. how about type 2 ?*/
- if (raw_pci_ops)
- valid = is_mmconf_reserved(e820_all_mapped, cfg, 1);
-
- if (!valid)
- goto reject;
}
-
- return;
-
-reject:
- printk(KERN_INFO PREFIX "not using MMCONFIG\n");
- free_all_mmcfg();
}
-static int __initdata known_bridge;
-
static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
struct acpi_mcfg_allocation *cfg)
{
@@ -529,7 +560,7 @@
return 0;
}
- printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
+ pr_err(PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
"is above 4GB, ignored\n", cfg->pci_segment,
cfg->start_bus_number, cfg->end_bus_number, cfg->address);
return -EINVAL;
@@ -556,7 +587,7 @@
i -= sizeof(struct acpi_mcfg_allocation);
};
if (entries == 0) {
- printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
+ pr_err(PREFIX "MMCONFIG has no entries\n");
return -ENODEV;
}
@@ -570,8 +601,7 @@
if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number,
cfg->end_bus_number, cfg->address) == NULL) {
- printk(KERN_WARNING PREFIX
- "no memory for MCFG entries\n");
+ pr_warn(PREFIX "no memory for MCFG entries\n");
free_all_mmcfg();
return -ENOMEM;
}
@@ -582,28 +612,7 @@
static void __init __pci_mmcfg_init(int early)
{
- /* MMCONFIG disabled */
- if ((pci_probe & PCI_PROBE_MMCONF) == 0)
- return;
-
- /* MMCONFIG already enabled */
- if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
- return;
-
- /* for late to exit */
- if (known_bridge)
- return;
-
- if (early) {
- if (pci_mmcfg_check_hostbridge())
- known_bridge = 1;
- }
-
- if (!known_bridge)
- acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
-
pci_mmcfg_reject_broken(early);
-
if (list_empty(&pci_mmcfg_list))
return;
@@ -620,33 +629,48 @@
if (pci_mmcfg_arch_init())
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
else {
- /*
- * Signal not to attempt to insert mmcfg resources because
- * the architecture mmcfg setup could not initialize.
- */
- pci_mmcfg_resources_inserted = 1;
+ free_all_mmcfg();
+ pci_mmcfg_arch_init_failed = true;
}
}
+static int __initdata known_bridge;
+
void __init pci_mmcfg_early_init(void)
{
- __pci_mmcfg_init(1);
+ if (pci_probe & PCI_PROBE_MMCONF) {
+ if (pci_mmcfg_check_hostbridge())
+ known_bridge = 1;
+ else
+ acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ __pci_mmcfg_init(1);
+ }
}
void __init pci_mmcfg_late_init(void)
{
- __pci_mmcfg_init(0);
+ /* MMCONFIG disabled */
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+ return;
+
+ if (known_bridge)
+ return;
+
+ /* MMCONFIG hasn't been enabled yet, try again */
+ if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
+ acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ __pci_mmcfg_init(0);
+ }
}
static int __init pci_mmcfg_late_insert_resources(void)
{
- /*
- * If resources are already inserted or we are not using MMCONFIG,
- * don't insert the resources.
- */
- if ((pci_mmcfg_resources_inserted == 1) ||
- (pci_probe & PCI_PROBE_MMCONF) == 0 ||
- list_empty(&pci_mmcfg_list))
+ struct pci_mmcfg_region *cfg;
+
+ pci_mmcfg_running_state = true;
+
+ /* If we are not using MMCONFIG, don't insert the resources. */
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return 1;
/*
@@ -654,7 +678,9 @@
* marked so it won't cause request errors when __request_region is
* called.
*/
- pci_mmcfg_insert_resources();
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ if (!cfg->res.parent)
+ insert_resource(&iomem_resource, &cfg->res);
return 0;
}
@@ -665,3 +691,101 @@
* with other system resources.
*/
late_initcall(pci_mmcfg_late_insert_resources);
+
+/* Add MMCFG information for host bridges */
+int __devinit pci_mmconfig_insert(struct device *dev,
+ u16 seg, u8 start, u8 end,
+ phys_addr_t addr)
+{
+ int rc;
+ struct resource *tmp = NULL;
+ struct pci_mmcfg_region *cfg;
+
+ if (!(pci_probe & PCI_PROBE_MMCONF) || pci_mmcfg_arch_init_failed)
+ return -ENODEV;
+
+ if (start > end)
+ return -EINVAL;
+
+ mutex_lock(&pci_mmcfg_lock);
+ cfg = pci_mmconfig_lookup(seg, start);
+ if (cfg) {
+ if (cfg->end_bus < end)
+ dev_info(dev, FW_INFO
+ "MMCONFIG for "
+ "domain %04x [bus %02x-%02x] "
+ "only partially covers this bridge\n",
+ cfg->segment, cfg->start_bus, cfg->end_bus);
+ mutex_unlock(&pci_mmcfg_lock);
+ return -EEXIST;
+ }
+
+ if (!addr) {
+ mutex_unlock(&pci_mmcfg_lock);
+ return -EINVAL;
+ }
+
+ rc = -EBUSY;
+ cfg = pci_mmconfig_alloc(seg, start, end, addr);
+ if (cfg == NULL) {
+ dev_warn(dev, "fail to add MMCONFIG (out of memory)\n");
+ rc = -ENOMEM;
+ } else if (!pci_mmcfg_check_reserved(dev, cfg, 0)) {
+ dev_warn(dev, FW_BUG "MMCONFIG %pR isn't reserved\n",
+ &cfg->res);
+ } else {
+ /* Insert resource if it's not in boot stage */
+ if (pci_mmcfg_running_state)
+ tmp = insert_resource_conflict(&iomem_resource,
+ &cfg->res);
+
+ if (tmp) {
+ dev_warn(dev,
+ "MMCONFIG %pR conflicts with "
+ "%s %pR\n",
+ &cfg->res, tmp->name, tmp);
+ } else if (pci_mmcfg_arch_map(cfg)) {
+ dev_warn(dev, "fail to map MMCONFIG %pR.\n",
+ &cfg->res);
+ } else {
+ list_add_sorted(cfg);
+ dev_info(dev, "MMCONFIG at %pR (base %#lx)\n",
+ &cfg->res, (unsigned long)addr);
+ cfg = NULL;
+ rc = 0;
+ }
+ }
+
+ if (cfg) {
+ if (cfg->res.parent)
+ release_resource(&cfg->res);
+ kfree(cfg);
+ }
+
+ mutex_unlock(&pci_mmcfg_lock);
+
+ return rc;
+}
+
+/* Delete MMCFG information for host bridges */
+int pci_mmconfig_delete(u16 seg, u8 start, u8 end)
+{
+ struct pci_mmcfg_region *cfg;
+
+ mutex_lock(&pci_mmcfg_lock);
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
+ if (cfg->segment == seg && cfg->start_bus == start &&
+ cfg->end_bus == end) {
+ list_del_rcu(&cfg->list);
+ synchronize_rcu();
+ pci_mmcfg_arch_unmap(cfg);
+ if (cfg->res.parent)
+ release_resource(&cfg->res);
+ mutex_unlock(&pci_mmcfg_lock);
+ kfree(cfg);
+ return 0;
+ }
+ mutex_unlock(&pci_mmcfg_lock);
+
+ return -ENOENT;
+}
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index 5372e86..db63ac2 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/rcupdate.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
#include <acpi/acpi.h>
@@ -60,9 +61,12 @@
return -EINVAL;
}
+ rcu_read_lock();
base = get_base_addr(seg, bus, devfn);
- if (!base)
+ if (!base) {
+ rcu_read_unlock();
goto err;
+ }
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -80,6 +84,7 @@
break;
}
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+ rcu_read_unlock();
return 0;
}
@@ -93,9 +98,12 @@
if ((bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
+ rcu_read_lock();
base = get_base_addr(seg, bus, devfn);
- if (!base)
+ if (!base) {
+ rcu_read_unlock();
return -EINVAL;
+ }
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -113,11 +121,12 @@
break;
}
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+ rcu_read_unlock();
return 0;
}
-static const struct pci_raw_ops pci_mmcfg = {
+const struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
@@ -132,3 +141,18 @@
void __init pci_mmcfg_arch_free(void)
{
}
+
+int __devinit pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
+{
+ return 0;
+}
+
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
+{
+ unsigned long flags;
+
+ /* Invalidate the cached mmcfg map entry. */
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ mmcfg_last_accessed_device = 0;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index 915a493..d4ebd07 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
+#include <linux/rcupdate.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
@@ -34,9 +35,12 @@
return -EINVAL;
}
+ rcu_read_lock();
addr = pci_dev_base(seg, bus, devfn);
- if (!addr)
+ if (!addr) {
+ rcu_read_unlock();
goto err;
+ }
switch (len) {
case 1:
@@ -49,6 +53,7 @@
*value = mmio_config_readl(addr + reg);
break;
}
+ rcu_read_unlock();
return 0;
}
@@ -62,9 +67,12 @@
if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
return -EINVAL;
+ rcu_read_lock();
addr = pci_dev_base(seg, bus, devfn);
- if (!addr)
+ if (!addr) {
+ rcu_read_unlock();
return -EINVAL;
+ }
switch (len) {
case 1:
@@ -77,16 +85,17 @@
mmio_config_writel(addr + reg, value);
break;
}
+ rcu_read_unlock();
return 0;
}
-static const struct pci_raw_ops pci_mmcfg = {
+const struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
-static void __iomem * __init mcfg_ioremap(struct pci_mmcfg_region *cfg)
+static void __iomem * __devinit mcfg_ioremap(struct pci_mmcfg_region *cfg)
{
void __iomem *addr;
u64 start, size;
@@ -105,16 +114,14 @@
{
struct pci_mmcfg_region *cfg;
- list_for_each_entry(cfg, &pci_mmcfg_list, list) {
- cfg->virt = mcfg_ioremap(cfg);
- if (!cfg->virt) {
- printk(KERN_ERR PREFIX "can't map MMCONFIG at %pR\n",
- &cfg->res);
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ if (pci_mmcfg_arch_map(cfg)) {
pci_mmcfg_arch_free();
return 0;
}
- }
+
raw_pci_ext_ops = &pci_mmcfg;
+
return 1;
}
@@ -122,10 +129,25 @@
{
struct pci_mmcfg_region *cfg;
- list_for_each_entry(cfg, &pci_mmcfg_list, list) {
- if (cfg->virt) {
- iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
- cfg->virt = NULL;
- }
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ pci_mmcfg_arch_unmap(cfg);
+}
+
+int __devinit pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
+{
+ cfg->virt = mcfg_ioremap(cfg);
+ if (!cfg->virt) {
+ pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
+{
+ if (cfg && cfg->virt) {
+ iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
+ cfg->virt = NULL;
}
}
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 140942f..e14a2ff 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -264,7 +264,7 @@
static void __devinit mrst_power_off_unused_dev(struct pci_dev *dev)
{
- pci_set_power_state(dev, PCI_D3cold);
+ pci_set_power_state(dev, PCI_D3hot);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index eb30e35..69759e9 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -46,7 +46,6 @@
* pcibios_fixups
* pcibios_align_resource
* pcibios_fixup_bus
- * pcibios_setup
* pci_bus_add_device
* pci_mmap_page_range
*/
@@ -187,7 +186,7 @@
bus = pci_scan_root_bus(NULL, pci_ctrl->first_busno,
pci_ctrl->ops, pci_ctrl, &resources);
pci_ctrl->bus = bus;
- pci_ctrl->last_busno = bus->subordinate;
+ pci_ctrl->last_busno = bus->busn_res.end;
if (next_busno <= pci_ctrl->last_busno)
next_busno = pci_ctrl->last_busno+1;
}
@@ -206,11 +205,6 @@
}
}
-char __init *pcibios_setup(char *str)
-{
- return str;
-}
-
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 7aff631..ec54014c 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -505,6 +505,8 @@
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
+ root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
+
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 88561029..1cc02ca 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -716,8 +716,9 @@
* @dev: device to examine; its driver model wakeup flags control
* whether it should be able to wake up the system
* @d_min_p: used to store the upper limit of allowed states range
- * Return value: preferred power state of the device on success, -ENODEV on
- * failure (ie. if there's no 'struct acpi_device' for @dev)
+ * @d_max_in: specify the lowest allowed states
+ * Return value: preferred power state of the device on success, -ENODEV
+ * (ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
*
* Find the lowest power (highest number) ACPI device power state that
* device @dev can be in while the system is in the sleep state represented
@@ -732,13 +733,15 @@
* via @wake.
*/
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
char acpi_method[] = "_SxD";
unsigned long long d_min, d_max;
+ if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+ return -EINVAL;
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
printk(KERN_DEBUG "ACPI handle has no context!\n");
return -ENODEV;
@@ -746,8 +749,10 @@
acpi_method[2] = '0' + acpi_target_sleep_state;
/*
- * If the sleep state is S0, we will return D3, but if the device has
- * _S0W, we will use the value from _S0W
+ * If the sleep state is S0, the lowest limit from ACPI is D3,
+ * but if the device has _S0W, we will use the value from _S0W
+ * as the lowest limit from ACPI. Finally, we will constrain
+ * the lowest limit with the specified one.
*/
d_min = ACPI_STATE_D0;
d_max = ACPI_STATE_D3;
@@ -791,8 +796,17 @@
}
}
+ if (d_max_in < d_min)
+ return -EINVAL;
if (d_min_p)
*d_min_p = d_min;
+ /* constrain d_max with specified lowest limit (max number) */
+ if (d_max > d_max_in) {
+ for (d_max = d_max_in; d_max > d_min; d_max--) {
+ if (adev->power.states[d_max].flags.valid)
+ break;
+ }
+ }
return d_max;
}
#endif /* CONFIG_PM */
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index b12af2f..2fb7d15 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -661,7 +661,7 @@
if (drhd->devices[i] &&
drhd->devices[i]->subordinate &&
drhd->devices[i]->subordinate->number <= bus &&
- drhd->devices[i]->subordinate->subordinate >= bus)
+ drhd->devices[i]->subordinate->busn_res.end >= bus)
return drhd->iommu;
}
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
index 85cc771..9d5eed7 100644
--- a/drivers/misc/cb710/core.c
+++ b/drivers/misc/cb710/core.c
@@ -180,7 +180,7 @@
pci_save_state(pdev);
pci_disable_device(pdev);
if (state.event & PM_EVENT_SLEEP)
- pci_set_power_state(pdev, PCI_D3cold);
+ pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index edeeb51..09fa3c6 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14168,7 +14168,7 @@
if (bridge->subordinate &&
(bridge->subordinate->number <=
tp->pdev->bus->number) &&
- (bridge->subordinate->subordinate >=
+ (bridge->subordinate->busn_res.end >=
tp->pdev->bus->number)) {
tg3_flag_set(tp, 5701_DMA_BUG);
pci_dev_put(bridge);
@@ -14196,7 +14196,7 @@
if (bridge && bridge->subordinate &&
(bridge->subordinate->number <=
tp->pdev->bus->number) &&
- (bridge->subordinate->subordinate >=
+ (bridge->subordinate->busn_res.end >=
tp->pdev->bus->number)) {
tg3_flag_set(tp, 40BIT_DMA_BUG);
pci_dev_put(bridge);
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 432d4bb..ffddc4f 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -174,7 +174,7 @@
int size, u32 *val)
{
struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
- u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
@@ -209,7 +209,7 @@
int size, u32 val)
{
struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
- u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
@@ -554,7 +554,7 @@
struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
- __func__, bus, bus->secondary,
+ __func__, bus, bus->busn_res.start,
bus->bridge->platform_data);
/* Firmware doesn't set up card-mode dino, so we have to */
@@ -898,6 +898,7 @@
LIST_HEAD(resources);
struct pci_bus *bus;
unsigned long hpa = dev->hpa.start;
+ int max;
name = "Dino";
if (is_card_dino(&dev->id)) {
@@ -983,6 +984,10 @@
if (dino_dev->hba.gmmio_space.flags)
pci_add_resource(&resources, &dino_dev->hba.gmmio_space);
+ dino_dev->hba.bus_num.start = dino_current_bus;
+ dino_dev->hba.bus_num.end = 255;
+ dino_dev->hba.bus_num.flags = IORESOURCE_BUS;
+ pci_add_resource(&resources, &dino_dev->hba.bus_num);
/*
** It's not used to avoid chicken/egg problems
** with configuration accessor functions.
@@ -998,12 +1003,13 @@
return 0;
}
- bus->subordinate = pci_scan_child_bus(bus);
+ max = pci_scan_child_bus(bus);
+ pci_bus_update_busn_res_end(bus, max);
/* This code *depends* on scanning being single threaded
* if it isn't, this global bus number count will fail
*/
- dino_current_bus = bus->subordinate + 1;
+ dino_current_bus = max + 1;
pci_bus_assign_resources(bus);
pci_bus_add_devices(bus);
return 0;
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 1f9e9fe..83380c8 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -532,7 +532,7 @@
intr_slot = PCI_SLOT(pcidev->devfn);
}
DBG_IRT("iosapic_xlate_pin: bus %d slot %d pin %d\n",
- pcidev->bus->secondary, intr_slot, intr_pin);
+ pcidev->bus->busn_res.start, intr_slot, intr_pin);
return irt_find_irqline(isi, intr_slot, intr_pin);
}
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 052fa23..4f9cf24 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -189,8 +189,8 @@
static int lba_device_present(u8 bus, u8 dfn, struct lba_device *d)
{
- u8 first_bus = d->hba.hba_bus->secondary;
- u8 last_sub_bus = d->hba.hba_bus->subordinate;
+ u8 first_bus = d->hba.hba_bus->busn_res.start;
+ u8 last_sub_bus = d->hba.hba_bus->busn_res.end;
if ((bus < first_bus) ||
(bus > last_sub_bus) ||
@@ -364,7 +364,7 @@
static int elroy_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
{
struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
- u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
u32 tok = LBA_CFG_TOK(local_bus, devfn);
void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
@@ -380,7 +380,7 @@
return 0;
}
- if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->secondary, devfn, d)) {
+ if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->busn_res.start, devfn, d)) {
DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __func__, tok, pos);
/* either don't want to look or know device isn't present. */
*data = ~0U;
@@ -431,7 +431,7 @@
static int elroy_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data)
{
struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
- u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
u32 tok = LBA_CFG_TOK(local_bus,devfn);
if ((pos > 255) || (devfn > 255))
@@ -444,7 +444,7 @@
return 0;
}
- if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->secondary, devfn, d))) {
+ if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->busn_res.start, devfn, d))) {
DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __func__, tok, pos,data);
return 1; /* New Workaround */
}
@@ -481,7 +481,7 @@
static int mercury_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
{
struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
- u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
u32 tok = LBA_CFG_TOK(local_bus, devfn);
void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
@@ -514,7 +514,7 @@
{
struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
- u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
u32 tok = LBA_CFG_TOK(local_bus,devfn);
if ((pos > 255) || (devfn > 255))
@@ -636,7 +636,7 @@
struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge));
DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n",
- bus, bus->secondary, bus->bridge->platform_data);
+ bus, (int)bus->busn_res.start, bus->bridge->platform_data);
/*
** Properly Setup MMIO resources for this bus.
@@ -989,6 +989,7 @@
case PAT_PBNUM:
lba_dev->hba.bus_num.start = p->start;
lba_dev->hba.bus_num.end = p->end;
+ lba_dev->hba.bus_num.flags = IORESOURCE_BUS;
break;
case PAT_LMMIO:
@@ -1366,6 +1367,7 @@
void *tmp_obj;
char *version;
void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096);
+ int max;
/* Read HW Rev First */
func_class = READ_REG32(addr + LBA_FCLASS);
@@ -1502,6 +1504,8 @@
if (lba_dev->hba.gmmio_space.flags)
pci_add_resource(&resources, &lba_dev->hba.gmmio_space);
+ pci_add_resource(&resources, &lba_dev->hba.bus_num);
+
dev->dev.platform_data = lba_dev;
lba_bus = lba_dev->hba.hba_bus =
pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start,
@@ -1511,7 +1515,7 @@
return 0;
}
- lba_bus->subordinate = pci_scan_child_bus(lba_bus);
+ max = pci_scan_child_bus(lba_bus);
/* This is in lieu of calling pci_assign_unassigned_resources() */
if (is_pdc_pat()) {
@@ -1541,7 +1545,7 @@
lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
}
- lba_next_bus = lba_bus->subordinate + 1;
+ lba_next_bus = max + 1;
pci_bus_add_devices(lba_bus);
/* Whew! Finally done! Tell services we got this one covered. */
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 2a58164..ba91a7e 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -162,7 +162,8 @@
if (ret > 0) \
ret = -EINVAL; \
return ret; \
-}
+} \
+EXPORT_SYMBOL_GPL(pci_user_read_config_##size);
/* Returns 0 on success, negative values indicate error. */
#define PCI_USER_WRITE_CONFIG(size,type) \
@@ -181,7 +182,8 @@
if (ret > 0) \
ret = -EINVAL; \
return ret; \
-}
+} \
+EXPORT_SYMBOL_GPL(pci_user_write_config_##size);
PCI_USER_READ_CONFIG(byte, u8)
PCI_USER_READ_CONFIG(word, u16)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 4ce5ef2..b511bd4 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -164,6 +164,10 @@
int pci_bus_add_device(struct pci_dev *dev)
{
int retval;
+ extern bool pci_fixup_final_inited;
+
+ if (pci_fixup_final_inited)
+ pci_fixup_device(pci_fixup_final, dev);
retval = device_add(&dev->dev);
if (retval)
return retval;
diff --git a/drivers/pci/hotplug-pci.c b/drivers/pci/hotplug-pci.c
index d3509cd..6258dc2 100644
--- a/drivers/pci/hotplug-pci.c
+++ b/drivers/pci/hotplug-pci.c
@@ -4,18 +4,26 @@
#include <linux/export.h>
#include "pci.h"
-
-unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
+int __ref pci_hp_add_bridge(struct pci_dev *dev)
{
- unsigned int max;
+ struct pci_bus *parent = dev->bus;
+ int pass, busnr, start = parent->busn_res.start;
+ int end = parent->busn_res.end;
- max = pci_scan_child_bus(bus);
+ for (busnr = start; busnr <= end; busnr++) {
+ if (!pci_find_bus(pci_domain_nr(parent), busnr))
+ break;
+ }
+ if (busnr-- > end) {
+ printk(KERN_ERR "No bus number available for hot-added bridge %s\n",
+ pci_name(dev));
+ return -1;
+ }
+ for (pass = 0; pass < 2; pass++)
+ busnr = pci_scan_bridge(parent, dev, busnr, pass);
+ if (!dev->subordinate)
+ return -1;
- /*
- * Make the discovered devices available.
- */
- pci_bus_add_devices(bus);
-
- return max;
+ return 0;
}
-EXPORT_SYMBOL(pci_do_scan_bus);
+EXPORT_SYMBOL_GPL(pci_hp_add_bridge);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 806c44f..395c67d 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -100,11 +100,11 @@
PCI_PRIMARY_BUS,
&buses);
- if (((buses >> 8) & 0xff) != bus->secondary) {
+ if (((buses >> 8) & 0xff) != bus->busn_res.start) {
buses = (buses & 0xff000000)
| ((unsigned int)(bus->primary) << 0)
- | ((unsigned int)(bus->secondary) << 8)
- | ((unsigned int)(bus->subordinate) << 16);
+ | ((unsigned int)(bus->busn_res.start) << 8)
+ | ((unsigned int)(bus->busn_res.end) << 16);
pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses);
}
return NOTIFY_OK;
@@ -132,6 +132,15 @@
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status)) {
+ warn("can't evaluate _ADR (%#x)\n", status);
+ return AE_OK;
+ }
+
+ device = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+
pdev = pbus->self;
if (pdev && pci_is_pcie(pdev)) {
tmp = acpi_find_root_bridge_handle(pdev);
@@ -144,10 +153,6 @@
}
}
- acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
- device = (adr >> 16) & 0xffff;
- function = adr & 0xffff;
-
newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL);
if (!newfunc)
return AE_NO_MEMORY;
@@ -692,7 +697,7 @@
* bus->subordinate value because it could have
* padding in it.
*/
- max = bus->secondary;
+ max = bus->busn_res.start;
list_for_each(tmp, &bus->children) {
n = pci_bus_max_busnr(pci_bus_b(tmp));
@@ -878,6 +883,24 @@
}
}
+/* return first device in slot, acquiring a reference on it */
+static struct pci_dev *dev_in_slot(struct acpiphp_slot *slot)
+{
+ struct pci_bus *bus = slot->bridge->pci_bus;
+ struct pci_dev *dev;
+ struct pci_dev *ret = NULL;
+
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (PCI_SLOT(dev->devfn) == slot->device) {
+ ret = pci_dev_get(dev);
+ break;
+ }
+ up_read(&pci_bus_sem);
+
+ return ret;
+}
+
/**
* disable_device - disable a slot
* @slot: ACPI PHP slot
@@ -893,6 +916,7 @@
pdev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0));
if (!pdev)
goto err_exit;
+ pci_dev_put(pdev);
list_for_each_entry(func, &slot->funcs, sibling) {
if (func->bridge) {
@@ -901,18 +925,22 @@
(u32)1, NULL, NULL);
func->bridge = NULL;
}
+ }
- pdev = pci_get_slot(slot->bridge->pci_bus,
- PCI_DEVFN(slot->device, func->function));
- if (pdev) {
- pci_stop_bus_device(pdev);
- if (pdev->subordinate) {
- disable_bridges(pdev->subordinate);
- pci_disable_device(pdev);
- }
- __pci_remove_bus_device(pdev);
- pci_dev_put(pdev);
+ /*
+ * enable_device() enumerates all functions in this device via
+ * pci_scan_slot(), whether they have associated ACPI hotplug
+ * methods (_EJ0, etc.) or not. Therefore, we remove all functions
+ * here.
+ */
+ while ((pdev = dev_in_slot(slot))) {
+ pci_stop_bus_device(pdev);
+ if (pdev->subordinate) {
+ disable_bridges(pdev->subordinate);
+ pci_disable_device(pdev);
}
+ __pci_remove_bus_device(pdev);
+ pci_dev_put(pdev);
}
list_for_each_entry(func, &slot->funcs, sibling) {
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index ae853cc..dcc75c7 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -285,42 +285,19 @@
for (fn = 0; fn < 8; fn++) {
struct pci_dev *dev;
- dev = pci_get_slot(parent, PCI_DEVFN(PCI_SLOT(slot->devfn), fn));
+ dev = pci_get_slot(parent,
+ PCI_DEVFN(PCI_SLOT(slot->devfn), fn));
if (!dev)
continue;
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
- (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
- /* Find an unused bus number for the new bridge */
- struct pci_bus *child;
- unsigned char busnr, start = parent->secondary;
- unsigned char end = parent->subordinate;
-
- for (busnr = start; busnr <= end; busnr++) {
- if (!pci_find_bus(pci_domain_nr(parent),
- busnr))
- break;
- }
- if (busnr >= end) {
- err("No free bus for hot-added bridge\n");
- pci_dev_put(dev);
- continue;
- }
- child = pci_add_new_bus(parent, dev, busnr);
- if (!child) {
- err("Cannot add new bus for %s\n",
- pci_name(dev));
- pci_dev_put(dev);
- continue;
- }
- child->subordinate = pci_do_scan_bus(child);
- pci_bus_size_bridges(child);
- }
+ (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
+ pci_hp_add_bridge(dev);
pci_dev_put(dev);
}
- pci_bus_assign_resources(parent);
+ pci_assign_unassigned_bridge_resources(parent->self);
+
pci_bus_add_devices(parent);
- pci_enable_bridges(parent);
dbg("%s - exit", __func__);
return 0;
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 1c84940..09801c6 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -83,7 +83,6 @@
int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
{
- unsigned char bus;
struct pci_bus *child;
int num;
@@ -106,9 +105,10 @@
}
if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus);
- child = (struct pci_bus*) pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus);
- pci_do_scan_bus(child);
+ pci_hp_add_bridge(func->pci_dev);
+ child = func->pci_dev->subordinate;
+ if (child)
+ pci_bus_add_devices(child);
}
pci_dev_put(func->pci_dev);
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 4fda7e6..7dccad5 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -775,7 +775,6 @@
static int ibm_configure_device(struct pci_func *func)
{
- unsigned char bus;
struct pci_bus *child;
int num;
int flag = 0; /* this is to make sure we don't double scan the bus,
@@ -805,9 +804,10 @@
}
}
if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
- pci_read_config_byte(func->dev, PCI_SECONDARY_BUS, &bus);
- child = pci_add_new_bus(func->dev->bus, func->dev, bus);
- pci_do_scan_bus(child);
+ pci_hp_add_bridge(func->dev);
+ child = func->dev->subordinate;
+ if (child)
+ pci_bus_add_devices(child);
}
return 0;
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 47d9dc0..09cecaf 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -34,29 +34,6 @@
#include "../pci.h"
#include "pciehp.h"
-static int __ref pciehp_add_bridge(struct pci_dev *dev)
-{
- struct pci_bus *parent = dev->bus;
- int pass, busnr, start = parent->secondary;
- int end = parent->subordinate;
-
- for (busnr = start; busnr <= end; busnr++) {
- if (!pci_find_bus(pci_domain_nr(parent), busnr))
- break;
- }
- if (busnr-- > end) {
- err("No bus number available for hot-added bridge %s\n",
- pci_name(dev));
- return -1;
- }
- for (pass = 0; pass < 2; pass++)
- busnr = pci_scan_bridge(parent, dev, busnr, pass);
- if (!dev->subordinate)
- return -1;
-
- return 0;
-}
-
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
@@ -85,9 +62,8 @@
if (!dev)
continue;
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
- (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
- pciehp_add_bridge(dev);
- }
+ (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
+ pci_hp_add_bridge(dev);
pci_dev_put(dev);
}
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index de57311..f64ca92 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -397,13 +397,11 @@
else
sn_io_slot_fixup(dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- unsigned char sec_bus;
- pci_read_config_byte(dev, PCI_SECONDARY_BUS,
- &sec_bus);
- new_bus = pci_add_new_bus(dev->bus, dev,
- sec_bus);
- pci_scan_child_bus(new_bus);
- new_ppb = 1;
+ pci_hp_add_bridge(dev);
+ if (dev->subordinate) {
+ new_bus = dev->subordinate;
+ new_ppb = 1;
+ }
}
pci_dev_put(dev);
}
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b00b09b..f9b5a52 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -262,9 +262,6 @@
}
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
- if (slots_not_empty)
- return WRONG_BUS_FREQUENCY;
-
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
ctrl_err(ctrl, "%s: Issue of set bus speed mode command"
" failed\n", __func__);
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index df7e4bf..c627ed9 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -37,9 +37,10 @@
int __ref shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
- struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
- int num, fn;
struct controller *ctrl = p_slot->ctrl;
+ struct pci_dev *bridge = ctrl->pci_dev;
+ struct pci_bus *parent = bridge->subordinate;
+ int num, fn;
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
@@ -61,39 +62,23 @@
if (!dev)
continue;
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
- (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
- /* Find an unused bus number for the new bridge */
- struct pci_bus *child;
- unsigned char busnr, start = parent->secondary;
- unsigned char end = parent->subordinate;
- for (busnr = start; busnr <= end; busnr++) {
- if (!pci_find_bus(pci_domain_nr(parent),
- busnr))
- break;
- }
- if (busnr > end) {
- ctrl_err(ctrl,
- "No free bus for hot-added bridge\n");
- pci_dev_put(dev);
- continue;
- }
- child = pci_add_new_bus(parent, dev, busnr);
- if (!child) {
- ctrl_err(ctrl, "Cannot add new bus for %s\n",
- pci_name(dev));
- pci_dev_put(dev);
- continue;
- }
- child->subordinate = pci_do_scan_bus(child);
- pci_bus_size_bridges(child);
- }
+ (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
+ pci_hp_add_bridge(dev);
+ pci_dev_put(dev);
+ }
+
+ pci_assign_unassigned_bridge_resources(bridge);
+
+ for (fn = 0; fn < 8; fn++) {
+ dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
+ if (!dev)
+ continue;
pci_configure_slot(dev);
pci_dev_put(dev);
}
- pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
- pci_enable_bridges(parent);
+
return 0;
}
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index efa30da..eeb23ce 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -73,13 +73,13 @@
}
}
out += sprintf(out, "Free resources: bus numbers\n");
- for (busnr = bus->secondary; busnr <= bus->subordinate; busnr++) {
+ for (busnr = bus->busn_res.start; busnr <= bus->busn_res.end; busnr++) {
if (!pci_find_bus(pci_domain_nr(bus), busnr))
break;
}
- if (busnr < bus->subordinate)
+ if (busnr < bus->busn_res.end)
out += sprintf(out, "start = %8.8x, length = %8.8x\n",
- busnr, (bus->subordinate - busnr));
+ busnr, (int)(bus->busn_res.end - busnr));
return out - buf;
}
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 6554e1a..74bbaf8 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -47,7 +47,7 @@
if (!child)
return NULL;
- child->subordinate = busnr;
+ pci_bus_insert_busn_res(child, busnr, busnr);
child->dev.parent = bus->bridge;
rc = pci_bus_add_child(child);
if (rc) {
@@ -327,7 +327,7 @@
iov->offset = offset;
iov->stride = stride;
- if (virtfn_bus(dev, nr_virtfn - 1) > dev->bus->subordinate) {
+ if (virtfn_bus(dev, nr_virtfn - 1) > dev->bus->busn_res.end) {
dev_err(&dev->dev, "SR-IOV: bus number out of range\n");
return -ENOMEM;
}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 61e2fef..fbf7b26 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -48,6 +48,12 @@
if (event != ACPI_NOTIFY_DEVICE_WAKE || !pci_dev)
return;
+ if (pci_dev->current_state == PCI_D3cold) {
+ pci_wakeup_event(pci_dev);
+ pm_runtime_resume(&pci_dev->dev);
+ return;
+ }
+
if (!pci_dev->pm_cap || !pci_dev->pme_support
|| pci_check_pme_status(pci_dev)) {
if (pci_dev->pme_poll)
@@ -162,6 +168,20 @@
return remove_pm_notifier(dev, pci_acpi_wake_dev);
}
+phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
+{
+ acpi_status status = AE_NOT_EXIST;
+ unsigned long long mcfg_addr;
+
+ if (handle)
+ status = acpi_evaluate_integer(handle, METHOD_NAME__CBA,
+ NULL, &mcfg_addr);
+ if (ACPI_FAILURE(status))
+ return 0;
+
+ return (phys_addr_t)mcfg_addr;
+}
+
/*
* _SxD returns the D-state with the highest power
* (lowest D-state number) supported in the S-state "x".
@@ -187,9 +207,13 @@
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
{
- int acpi_state;
+ int acpi_state, d_max;
- acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL);
+ if (pdev->no_d3cold)
+ d_max = ACPI_STATE_D3_HOT;
+ else
+ d_max = ACPI_STATE_D3_COLD;
+ acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL, d_max);
if (acpi_state < 0)
return PCI_POWER_ERROR;
@@ -296,7 +320,13 @@
static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
{
- if (dev->pme_interrupt)
+ /*
+ * Per PCI Express Base Specification Revision 2.0 section
+ * 5.3.3.2 Link Wakeup, platform support is needed for D3cold
+ * waking up to power on the main link even if there is PME
+ * support for D3cold
+ */
+ if (dev->pme_interrupt && !dev->runtime_d3cold)
return 0;
if (!acpi_pm_device_run_wake(&dev->dev, enable))
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index bf0cee6..1dd1d9d 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -459,16 +459,17 @@
return 0;
}
-static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
-{
- pci_restore_standard_config(pci_dev);
- pci_fixup_device(pci_fixup_resume_early, pci_dev);
-}
-
#endif
#ifdef CONFIG_PM_SLEEP
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+ pci_power_up(pci_dev);
+ pci_restore_state(pci_dev);
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
+}
+
/*
* Default "suspend" method for devices that have no driver provided suspend,
* or not even a driver at all (second part).
@@ -1019,10 +1020,13 @@
if (!pm || !pm->runtime_suspend)
return -ENOSYS;
+ pci_dev->no_d3cold = false;
error = pm->runtime_suspend(dev);
suspend_report_result(pm->runtime_suspend, error);
if (error)
return error;
+ if (!pci_dev->d3cold_allowed)
+ pci_dev->no_d3cold = true;
pci_fixup_device(pci_fixup_suspend, pci_dev);
@@ -1044,17 +1048,23 @@
static int pci_pm_runtime_resume(struct device *dev)
{
+ int rc;
struct pci_dev *pci_dev = to_pci_dev(dev);
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (!pm || !pm->runtime_resume)
return -ENOSYS;
- pci_pm_default_resume_early(pci_dev);
+ pci_restore_standard_config(pci_dev);
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
__pci_enable_wake(pci_dev, PCI_D0, true, false);
pci_fixup_device(pci_fixup_resume, pci_dev);
- return pm->runtime_resume(dev);
+ rc = pm->runtime_resume(dev);
+
+ pci_dev->runtime_d3cold = false;
+
+ return rc;
}
static int pci_pm_runtime_idle(struct device *dev)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 86c63fe..6869009 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -28,6 +28,7 @@
#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/vgaarb.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
static int sysfs_initialized; /* = 0 */
@@ -378,6 +379,31 @@
#endif
+#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
+static ssize_t d3cold_allowed_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ pdev->d3cold_allowed = !!val;
+ pm_runtime_resume(dev);
+
+ return count;
+}
+
+static ssize_t d3cold_allowed_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ return sprintf (buf, "%u\n", pdev->d3cold_allowed);
+}
+#endif
+
struct device_attribute pci_dev_attrs[] = {
__ATTR_RO(resource),
__ATTR_RO(vendor),
@@ -402,6 +428,9 @@
__ATTR(remove, (S_IWUSR|S_IWGRP), NULL, remove_store),
__ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store),
#endif
+#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
+ __ATTR(d3cold_allowed, 0644, d3cold_allowed_show, d3cold_allowed_store),
+#endif
__ATTR_NULL,
};
@@ -1112,7 +1141,7 @@
.write = pci_write_config,
};
-int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev)
+int __weak pcibios_add_platform_entries(struct pci_dev *dev)
{
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 447e834..f3ea977 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -110,7 +110,7 @@
struct list_head *tmp;
unsigned char max, n;
- max = bus->subordinate;
+ max = bus->busn_res.end;
list_for_each(tmp, &bus->children) {
n = pci_bus_max_busnr(pci_bus_b(tmp));
if(n > max)
@@ -136,30 +136,6 @@
EXPORT_SYMBOL_GPL(pci_ioremap_bar);
#endif
-#if 0
-/**
- * pci_max_busnr - returns maximum PCI bus number
- *
- * Returns the highest PCI bus number present in the system global list of
- * PCI buses.
- */
-unsigned char __devinit
-pci_max_busnr(void)
-{
- struct pci_bus *bus = NULL;
- unsigned char max, n;
-
- max = 0;
- while ((bus = pci_find_next_bus(bus)) != NULL) {
- n = pci_bus_max_busnr(bus);
- if(n > max)
- max = n;
- }
- return max;
-}
-
-#endif /* 0 */
-
#define PCI_FIND_CAP_TTL 48
static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
@@ -278,6 +254,38 @@
}
/**
+ * pci_pcie_cap2 - query for devices' PCI_CAP_ID_EXP v2 capability structure
+ * @dev: PCI device to check
+ *
+ * Like pci_pcie_cap() but also checks that the PCIe capability version is
+ * >= 2. Note that v1 capability structures could be sparse in that not
+ * all register fields were required. v2 requires the entire structure to
+ * be present size wise, while still allowing for non-implemented registers
+ * to exist but they must be hardwired to 0.
+ *
+ * Due to the differences in the versions of capability structures, one
+ * must be careful not to try and access non-existant registers that may
+ * exist in early versions - v1 - of Express devices.
+ *
+ * Returns the offset of the PCIe capability structure as long as the
+ * capability version is >= 2; otherwise 0 is returned.
+ */
+static int pci_pcie_cap2(struct pci_dev *dev)
+{
+ u16 flags;
+ int pos;
+
+ pos = pci_pcie_cap(dev);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+ if ((flags & PCI_EXP_FLAGS_VERS) < 2)
+ pos = 0;
+ }
+
+ return pos;
+}
+
+/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
* @cap: capability code
@@ -329,49 +337,6 @@
}
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
-/**
- * pci_bus_find_ext_capability - find an extended capability
- * @bus: the PCI bus to query
- * @devfn: PCI device to query
- * @cap: capability code
- *
- * Like pci_find_ext_capability() but works for pci devices that do not have a
- * pci_dev structure set up yet.
- *
- * Returns the address of the requested capability structure within the
- * device's PCI configuration space or 0 in case the device does not
- * support it.
- */
-int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
- int cap)
-{
- u32 header;
- int ttl;
- int pos = PCI_CFG_SPACE_SIZE;
-
- /* minimum 8 bytes per capability */
- ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
-
- if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
- return 0;
- if (header == 0xffffffff || header == 0)
- return 0;
-
- while (ttl-- > 0) {
- if (PCI_EXT_CAP_ID(header) == cap)
- return pos;
-
- pos = PCI_EXT_CAP_NEXT(header);
- if (pos < PCI_CFG_SPACE_SIZE)
- break;
-
- if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
- break;
- }
-
- return 0;
-}
-
static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
{
int rc, ttl = PCI_FIND_CAP_TTL;
@@ -622,7 +587,8 @@
dev_info(&dev->dev, "Refused to change power state, "
"currently in D%d\n", dev->current_state);
- /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+ /*
+ * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
* from D3hot to D0 _may_ perform an internal reset, thereby
* going to "D0 Uninitialized" rather than "D0 Initialized".
@@ -654,6 +620,16 @@
if (dev->pm_cap) {
u16 pmcsr;
+ /*
+ * Configuration space is not accessible for device in
+ * D3cold, so just keep or set D3cold for safety
+ */
+ if (dev->current_state == PCI_D3cold)
+ return;
+ if (state == PCI_D3cold) {
+ dev->current_state = PCI_D3cold;
+ return;
+ }
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
} else {
@@ -662,6 +638,19 @@
}
/**
+ * pci_power_up - Put the given device into D0 forcibly
+ * @dev: PCI device to power up
+ */
+void pci_power_up(struct pci_dev *dev)
+{
+ if (platform_pci_power_manageable(dev))
+ platform_pci_set_power_state(dev, PCI_D0);
+
+ pci_raw_set_power_state(dev, PCI_D0);
+ pci_update_current_state(dev, PCI_D0);
+}
+
+/**
* pci_platform_power_transition - Use platform to change device power state
* @dev: PCI device to handle.
* @state: State to put the device into.
@@ -694,8 +683,50 @@
*/
static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
{
- if (state == PCI_D0)
+ if (state == PCI_D0) {
pci_platform_power_transition(dev, PCI_D0);
+ /*
+ * Mandatory power management transition delays, see
+ * PCI Express Base Specification Revision 2.0 Section
+ * 6.6.1: Conventional Reset. Do not delay for
+ * devices powered on/off by corresponding bridge,
+ * because have already delayed for the bridge.
+ */
+ if (dev->runtime_d3cold) {
+ msleep(dev->d3cold_delay);
+ /*
+ * When powering on a bridge from D3cold, the
+ * whole hierarchy may be powered on into
+ * D0uninitialized state, resume them to give
+ * them a chance to suspend again
+ */
+ pci_wakeup_bus(dev->subordinate);
+ }
+ }
+}
+
+/**
+ * __pci_dev_set_current_state - Set current state of a PCI device
+ * @dev: Device to handle
+ * @data: pointer to state to be set
+ */
+static int __pci_dev_set_current_state(struct pci_dev *dev, void *data)
+{
+ pci_power_t state = *(pci_power_t *)data;
+
+ dev->current_state = state;
+ return 0;
+}
+
+/**
+ * __pci_bus_set_current_state - Walk given bus and set current state of devices
+ * @bus: Top bus of the subtree to walk.
+ * @state: state to be set
+ */
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
+{
+ if (bus)
+ pci_walk_bus(bus, __pci_dev_set_current_state, &state);
}
/**
@@ -707,8 +738,15 @@
*/
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
{
- return state >= PCI_D0 ?
- pci_platform_power_transition(dev, state) : -EINVAL;
+ int ret;
+
+ if (state <= PCI_D0)
+ return -EINVAL;
+ ret = pci_platform_power_transition(dev, state);
+ /* Power off the bridge may power off the whole hierarchy */
+ if (!ret && state == PCI_D3cold)
+ __pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+ return ret;
}
EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
@@ -732,8 +770,8 @@
int error;
/* bound the state we're entering */
- if (state > PCI_D3hot)
- state = PCI_D3hot;
+ if (state > PCI_D3cold)
+ state = PCI_D3cold;
else if (state < PCI_D0)
state = PCI_D0;
else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
@@ -744,14 +782,23 @@
*/
return 0;
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
__pci_start_power_transition(dev, state);
/* This device is quirked not to be put into D3, so
don't put it in D3 */
- if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+ if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
- error = pci_raw_set_power_state(dev, state);
+ /*
+ * To put device in D3cold, we put device into D3hot in native
+ * way, then put device into D3cold with platform ops
+ */
+ error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
+ PCI_D3hot : state);
if (!__pci_complete_power_transition(dev, state))
error = 0;
@@ -822,12 +869,6 @@
((flags & PCI_EXP_FLAGS_VERS) > 1 || \
(type == PCI_EXP_TYPE_ROOT_PORT || \
type == PCI_EXP_TYPE_RC_EC))
-#define pcie_cap_has_devctl2(type, flags) \
- ((flags & PCI_EXP_FLAGS_VERS) > 1)
-#define pcie_cap_has_lnkctl2(type, flags) \
- ((flags & PCI_EXP_FLAGS_VERS) > 1)
-#define pcie_cap_has_sltctl2(type, flags) \
- ((flags & PCI_EXP_FLAGS_VERS) > 1)
static struct pci_cap_saved_state *pci_find_saved_cap(
struct pci_dev *pci_dev, char cap)
@@ -870,13 +911,14 @@
pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
if (pcie_cap_has_rtctl(dev->pcie_type, flags))
pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
- if (pcie_cap_has_devctl2(dev->pcie_type, flags))
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
- if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
- if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
+ pos = pci_pcie_cap2(dev);
+ if (!pos)
+ return 0;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
return 0;
}
@@ -903,12 +945,14 @@
pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
if (pcie_cap_has_rtctl(dev->pcie_type, flags))
pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
- if (pcie_cap_has_devctl2(dev->pcie_type, flags))
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
- if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
- if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
+
+ pos = pci_pcie_cap2(dev);
+ if (!pos)
+ return;
+
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
}
@@ -1349,7 +1393,7 @@
* is the default implementation. Architecture implementations can
* override this.
*/
-void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
+void __weak pcibios_disable_device (struct pci_dev *dev) {}
static void do_pci_disable_device(struct pci_dev *dev)
{
@@ -1413,8 +1457,8 @@
* Sets the PCIe reset state for the device. This is the default
* implementation. Architecture implementations can override this.
*/
-int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
- enum pcie_reset_state state)
+int __weak pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state)
{
return -EINVAL;
}
@@ -1498,6 +1542,28 @@
}
/**
+ * pci_wakeup - Wake up a PCI device
+ * @dev: Device to handle.
+ * @ign: ignored parameter
+ */
+static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
+{
+ pci_wakeup_event(pci_dev);
+ pm_request_resume(&pci_dev->dev);
+ return 0;
+}
+
+/**
+ * pci_wakeup_bus - Walk given bus and wake up devices on it
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_wakeup_bus(struct pci_bus *bus)
+{
+ if (bus)
+ pci_walk_bus(bus, pci_wakeup, NULL);
+}
+
+/**
* pci_pme_capable - check the capability of PCI device to generate PME#
* @dev: PCI device to handle.
* @state: PCI state from which device will issue PME#.
@@ -1518,6 +1584,16 @@
if (!list_empty(&pci_pme_list)) {
list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
if (pme_dev->dev->pme_poll) {
+ struct pci_dev *bridge;
+
+ bridge = pme_dev->dev->bus->self;
+ /*
+ * If bridge is in low power state, the
+ * configuration space of subordinate devices
+ * may be not accessible
+ */
+ if (bridge && bridge->current_state != PCI_D0)
+ continue;
pci_pme_wakeup(pme_dev->dev, NULL);
} else {
list_del(&pme_dev->list);
@@ -1744,6 +1820,10 @@
if (target_state == PCI_POWER_ERROR)
return -EIO;
+ /* D3cold during system suspend/hibernate is not supported */
+ if (target_state > PCI_D3hot)
+ target_state = PCI_D3hot;
+
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
@@ -1781,12 +1861,16 @@
if (target_state == PCI_POWER_ERROR)
return -EIO;
+ dev->runtime_d3cold = target_state == PCI_D3cold;
+
__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
error = pci_set_power_state(dev, target_state);
- if (error)
+ if (error) {
__pci_enable_wake(dev, target_state, true, false);
+ dev->runtime_d3cold = false;
+ }
return error;
}
@@ -1856,6 +1940,7 @@
dev->pm_cap = pm;
dev->d3_delay = PCI_PM_D3_WAIT;
+ dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
dev->d1_support = false;
dev->d2_support = false;
@@ -1983,7 +2068,7 @@
{
int pos;
u32 cap;
- u16 flags, ctrl;
+ u16 ctrl;
struct pci_dev *bridge;
if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
@@ -1994,18 +2079,14 @@
return;
bridge = dev->bus->self;
- if (!bridge || !pci_is_pcie(bridge))
+ if (!bridge)
return;
- pos = pci_pcie_cap(bridge);
+ /* ARI is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(bridge);
if (!pos)
return;
- /* ARI is a PCIe v2 feature */
- pci_read_config_word(bridge, pos + PCI_EXP_FLAGS, &flags);
- if ((flags & PCI_EXP_FLAGS_VERS) < 2)
- return;
-
pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
if (!(cap & PCI_EXP_DEVCAP2_ARI))
return;
@@ -2018,7 +2099,7 @@
}
/**
- * pci_enable_ido - enable ID-based ordering on a device
+ * pci_enable_ido - enable ID-based Ordering on a device
* @dev: the PCI device
* @type: which types of IDO to enable
*
@@ -2031,7 +2112,8 @@
int pos;
u16 ctrl;
- pos = pci_pcie_cap(dev);
+ /* ID-based Ordering is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2054,10 +2136,8 @@
int pos;
u16 ctrl;
- if (!pci_is_pcie(dev))
- return;
-
- pos = pci_pcie_cap(dev);
+ /* ID-based Ordering is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2096,10 +2176,8 @@
u16 ctrl;
int ret;
- if (!pci_is_pcie(dev))
- return -ENOTSUPP;
-
- pos = pci_pcie_cap(dev);
+ /* OBFF is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return -ENOTSUPP;
@@ -2108,7 +2186,7 @@
return -ENOTSUPP; /* no OBFF support at all */
/* Make sure the topology supports OBFF as well */
- if (dev->bus) {
+ if (dev->bus->self) {
ret = pci_enable_obff(dev->bus->self, type);
if (ret)
return ret;
@@ -2149,10 +2227,8 @@
int pos;
u16 ctrl;
- if (!pci_is_pcie(dev))
- return;
-
- pos = pci_pcie_cap(dev);
+ /* OBFF is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2169,15 +2245,13 @@
* RETURNS:
* True if @dev supports latency tolerance reporting, false otherwise.
*/
-bool pci_ltr_supported(struct pci_dev *dev)
+static bool pci_ltr_supported(struct pci_dev *dev)
{
int pos;
u32 cap;
- if (!pci_is_pcie(dev))
- return false;
-
- pos = pci_pcie_cap(dev);
+ /* LTR is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return false;
@@ -2185,7 +2259,6 @@
return cap & PCI_EXP_DEVCAP2_LTR;
}
-EXPORT_SYMBOL(pci_ltr_supported);
/**
* pci_enable_ltr - enable latency tolerance reporting
@@ -2206,7 +2279,8 @@
if (!pci_ltr_supported(dev))
return -ENOTSUPP;
- pos = pci_pcie_cap(dev);
+ /* LTR is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return -ENOTSUPP;
@@ -2215,7 +2289,7 @@
return -EINVAL;
/* Enable upstream ports first */
- if (dev->bus) {
+ if (dev->bus->self) {
ret = pci_enable_ltr(dev->bus->self);
if (ret)
return ret;
@@ -2241,7 +2315,8 @@
if (!pci_ltr_supported(dev))
return;
- pos = pci_pcie_cap(dev);
+ /* LTR is a PCIe cap v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2360,6 +2435,75 @@
}
/**
+ * pci_acs_enabled - test ACS against required flags for a given device
+ * @pdev: device to test
+ * @acs_flags: required PCI ACS flags
+ *
+ * Return true if the device supports the provided flags. Automatically
+ * filters out flags that are not implemented on multifunction devices.
+ */
+bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
+{
+ int pos, ret;
+ u16 ctrl;
+
+ ret = pci_dev_specific_acs_enabled(pdev, acs_flags);
+ if (ret >= 0)
+ return ret > 0;
+
+ if (!pci_is_pcie(pdev))
+ return false;
+
+ /* Filter out flags not applicable to multifunction */
+ if (pdev->multifunction)
+ acs_flags &= (PCI_ACS_RR | PCI_ACS_CR |
+ PCI_ACS_EC | PCI_ACS_DT);
+
+ if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM ||
+ pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+ pdev->multifunction) {
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ACS);
+ if (!pos)
+ return false;
+
+ pci_read_config_word(pdev, pos + PCI_ACS_CTRL, &ctrl);
+ if ((ctrl & acs_flags) != acs_flags)
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * pci_acs_path_enable - test ACS flags from start to end in a hierarchy
+ * @start: starting downstream device
+ * @end: ending upstream device or NULL to search to the root bus
+ * @acs_flags: required flags
+ *
+ * Walk up a device tree from start to end testing PCI ACS support. If
+ * any step along the way does not support the required flags, return false.
+ */
+bool pci_acs_path_enabled(struct pci_dev *start,
+ struct pci_dev *end, u16 acs_flags)
+{
+ struct pci_dev *pdev, *parent = start;
+
+ do {
+ pdev = parent;
+
+ if (!pci_acs_enabled(pdev, acs_flags))
+ return false;
+
+ if (pci_is_root_bus(pdev->bus))
+ return (end == NULL);
+
+ parent = pdev->bus->self;
+ } while (pdev != end);
+
+ return true;
+}
+
+/**
* pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
* @dev: the PCI device
* @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
@@ -2666,6 +2810,18 @@
}
/**
+ * pcibios_setup - process "pci=" kernel boot arguments
+ * @str: string used to pass in "pci=" kernel boot arguments
+ *
+ * Process kernel boot arguments. This is the default implementation.
+ * Architecture specific implementations can override this as necessary.
+ */
+char * __weak __init pcibios_setup(char *str)
+{
+ return str;
+}
+
+/**
* pcibios_set_master - enable PCI bus-mastering for device dev
* @dev: the PCI device to enable
*
@@ -2876,6 +3032,9 @@
bool mask_supported = false;
u16 orig, new;
+ if (dev->broken_intx_masking)
+ return false;
+
pci_cfg_access_lock(dev);
pci_read_config_word(dev, PCI_COMMAND, &orig);
@@ -3395,8 +3554,7 @@
o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
if (o != v) {
- if (v > o && dev->bus &&
- (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+ if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
return -EIO;
cmd &= ~PCI_X_CMD_MAX_READ;
@@ -3851,7 +4009,7 @@
* greater than 0xff). This is the default implementation. Architecture
* implementations can override this.
*/
-int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
+int __weak pci_ext_cfg_avail(struct pci_dev *dev)
{
return 1;
}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index e494347..bacbcba 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -67,9 +67,11 @@
extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
+extern void pci_power_up(struct pci_dev *dev);
extern void pci_disable_enabled_device(struct pci_dev *dev);
extern int pci_finish_runtime_suspend(struct pci_dev *dev);
extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+extern void pci_wakeup_bus(struct pci_bus *bus);
extern void pci_pm_init(struct pci_dev *dev);
extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
@@ -86,13 +88,6 @@
return !!(pci_dev->subordinate);
}
-extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
-extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
-extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
-extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
-extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
-extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
-
struct pci_vpd_ops {
ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
@@ -124,7 +119,7 @@
#endif
/* Functions for PCI Hotplug drivers to use */
-extern unsigned int pci_do_scan_bus(struct pci_bus *bus);
+int pci_hp_add_bridge(struct pci_dev *dev);
#ifdef HAVE_PCI_LEGACY
extern void pci_create_legacy_files(struct pci_bus *bus);
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index 275bf15..124f20f 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -59,7 +59,7 @@
p = (struct acpi_hest_aer_common *)(hest_hdr + 1);
if (p->flags & ACPI_HEST_GLOBAL) {
- if ((info->pci_dev->is_pcie &&
+ if ((pci_is_pcie(info->pci_dev) &&
info->pci_dev->pcie_type == pcie_type) || bridge)
ff = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST);
} else
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index e0610bd..3a7eefc 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/init.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
@@ -99,6 +100,51 @@
return 0;
}
+#ifdef CONFIG_PM_RUNTIME
+struct d3cold_info {
+ bool no_d3cold;
+ unsigned int d3cold_delay;
+};
+
+static int pci_dev_d3cold_info(struct pci_dev *pdev, void *data)
+{
+ struct d3cold_info *info = data;
+
+ info->d3cold_delay = max_t(unsigned int, pdev->d3cold_delay,
+ info->d3cold_delay);
+ if (pdev->no_d3cold)
+ info->no_d3cold = true;
+ return 0;
+}
+
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct d3cold_info d3cold_info = {
+ .no_d3cold = false,
+ .d3cold_delay = PCI_PM_D3_WAIT,
+ };
+
+ /*
+ * If any subordinate device disable D3cold, we should not put
+ * the port into D3cold. The D3cold delay of port should be
+ * the max of that of all subordinate devices.
+ */
+ pci_walk_bus(pdev->subordinate, pci_dev_d3cold_info, &d3cold_info);
+ pdev->no_d3cold = d3cold_info.no_d3cold;
+ pdev->d3cold_delay = d3cold_info.d3cold_delay;
+ return 0;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+#else
+#define pcie_port_runtime_suspend NULL
+#define pcie_port_runtime_resume NULL
+#endif
+
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
.resume = pcie_port_device_resume,
@@ -107,6 +153,8 @@
.poweroff = pcie_port_device_suspend,
.restore = pcie_port_device_resume,
.resume_noirq = pcie_port_resume_noirq,
+ .runtime_suspend = pcie_port_runtime_suspend,
+ .runtime_resume = pcie_port_runtime_resume,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
@@ -117,6 +165,14 @@
#endif /* !PM */
/*
+ * PCIe port runtime suspend is broken for some chipsets, so use a
+ * black list to disable runtime PM for these chipsets.
+ */
+static const struct pci_device_id port_runtime_pm_black_list[] = {
+ { /* end: all zeroes */ }
+};
+
+/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
@@ -144,12 +200,16 @@
return status;
pci_save_state(dev);
+ if (!pci_match_id(port_runtime_pm_black_list, dev))
+ pm_runtime_put_noidle(&dev->dev);
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
+ if (!pci_match_id(port_runtime_pm_black_list, dev))
+ pm_runtime_get_noresume(&dev->dev);
pcie_port_device_remove(dev);
pci_disable_device(dev);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ef24cf7..6c143b4 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -16,10 +16,47 @@
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
#define CARDBUS_RESERVE_BUSNR 3
+struct resource busn_resource = {
+ .name = "PCI busn",
+ .start = 0,
+ .end = 255,
+ .flags = IORESOURCE_BUS,
+};
+
/* Ugh. Need to stop exporting this to modules. */
LIST_HEAD(pci_root_buses);
EXPORT_SYMBOL(pci_root_buses);
+static LIST_HEAD(pci_domain_busn_res_list);
+
+struct pci_domain_busn_res {
+ struct list_head list;
+ struct resource res;
+ int domain_nr;
+};
+
+static struct resource *get_pci_domain_busn_res(int domain_nr)
+{
+ struct pci_domain_busn_res *r;
+
+ list_for_each_entry(r, &pci_domain_busn_res_list, list)
+ if (r->domain_nr == domain_nr)
+ return &r->res;
+
+ r = kzalloc(sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return NULL;
+
+ r->domain_nr = domain_nr;
+ r->res.start = 0;
+ r->res.end = 0xff;
+ r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED;
+
+ list_add_tail(&r->list, &pci_domain_busn_res_list);
+
+ return &r->res;
+}
+
static int find_anything(struct device *dev, void *data)
{
return 1;
@@ -152,9 +189,6 @@
pci_read_config_dword(dev, pos, &sz);
pci_write_config_dword(dev, pos, l);
- if (!dev->mmio_always_on)
- pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
-
/*
* All bits set in sz means the device isn't working properly.
* If the BAR isn't implemented, all bits must be 0. If it's a
@@ -239,6 +273,9 @@
}
out:
+ if (!dev->mmio_always_on)
+ pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
+
return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
fail:
res->flags = 0;
@@ -289,10 +326,11 @@
if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
u16 io_base_hi, io_limit_hi;
+
pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
- base |= (io_base_hi << 16);
- limit |= (io_limit_hi << 16);
+ base |= ((unsigned long) io_base_hi << 16);
+ limit |= ((unsigned long) io_limit_hi << 16);
}
if (base <= limit) {
@@ -315,8 +353,8 @@
res = child->resource[1];
pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
- base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
- limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
+ base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
+ limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
if (base <= limit) {
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
region.start = base;
@@ -337,11 +375,12 @@
res = child->resource[2];
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
- base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
- limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+ base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+ limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
u32 mem_base_hi, mem_limit_hi;
+
pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
@@ -352,8 +391,8 @@
*/
if (mem_base_hi <= mem_limit_hi) {
#if BITS_PER_LONG == 64
- base |= ((long) mem_base_hi) << 32;
- limit |= ((long) mem_limit_hi) << 32;
+ base |= ((unsigned long) mem_base_hi) << 32;
+ limit |= ((unsigned long) mem_limit_hi) << 32;
#else
if (mem_base_hi || mem_limit_hi) {
dev_err(&dev->dev, "can't handle 64-bit "
@@ -384,8 +423,8 @@
if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
return;
- dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
- child->secondary, child->subordinate,
+ dev_info(&dev->dev, "PCI bridge to %pR%s\n",
+ &child->busn_res,
dev->transparent ? " (subtractive decode)" : "");
pci_bus_remove_resources(child);
@@ -602,9 +641,9 @@
* Set up the primary, secondary and subordinate
* bus numbers.
*/
- child->number = child->secondary = busnr;
- child->primary = parent->secondary;
- child->subordinate = 0xff;
+ child->number = child->busn_res.start = busnr;
+ child->primary = parent->busn_res.start;
+ child->busn_res.end = 0xff;
if (!bridge)
return child;
@@ -646,8 +685,8 @@
if (!pcibios_assign_all_busses())
return;
- while (parent->parent && parent->subordinate < max) {
- parent->subordinate = max;
+ while (parent->parent && parent->busn_res.end < max) {
+ parent->busn_res.end = max;
pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
parent = parent->parent;
}
@@ -721,15 +760,15 @@
if (!child)
goto out;
child->primary = primary;
- child->subordinate = subordinate;
+ pci_bus_insert_busn_res(child, secondary, subordinate);
child->bridge_ctl = bctl;
}
cmax = pci_scan_child_bus(child);
if (cmax > max)
max = cmax;
- if (child->subordinate > max)
- max = child->subordinate;
+ if (child->busn_res.end > max)
+ max = child->busn_res.end;
} else {
/*
* We need to assign a number to this bus which we always
@@ -759,11 +798,12 @@
child = pci_add_new_bus(bus, dev, ++max);
if (!child)
goto out;
+ pci_bus_insert_busn_res(child, max, 0xff);
}
buses = (buses & 0xff000000)
| ((unsigned int)(child->primary) << 0)
- | ((unsigned int)(child->secondary) << 8)
- | ((unsigned int)(child->subordinate) << 16);
+ | ((unsigned int)(child->busn_res.start) << 8)
+ | ((unsigned int)(child->busn_res.end) << 16);
/*
* yenta.c forces a secondary latency timer of 176.
@@ -808,8 +848,8 @@
break;
while (parent->parent) {
if ((!pcibios_assign_all_busses()) &&
- (parent->subordinate > max) &&
- (parent->subordinate <= max+i)) {
+ (parent->busn_res.end > max) &&
+ (parent->busn_res.end <= max+i)) {
j = 1;
}
parent = parent->parent;
@@ -830,7 +870,7 @@
/*
* Set the subordinate bus number to its real value.
*/
- child->subordinate = max;
+ pci_bus_update_busn_res_end(child, max);
pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
}
@@ -840,19 +880,19 @@
/* Has only triggered on CardBus, fixup is in yenta_socket */
while (bus->parent) {
- if ((child->subordinate > bus->subordinate) ||
- (child->number > bus->subordinate) ||
+ if ((child->busn_res.end > bus->busn_res.end) ||
+ (child->number > bus->busn_res.end) ||
(child->number < bus->number) ||
- (child->subordinate < bus->number)) {
- dev_info(&child->dev, "[bus %02x-%02x] %s "
- "hidden behind%s bridge %s [bus %02x-%02x]\n",
- child->number, child->subordinate,
- (bus->number > child->subordinate &&
- bus->subordinate < child->number) ?
+ (child->busn_res.end < bus->number)) {
+ dev_info(&child->dev, "%pR %s "
+ "hidden behind%s bridge %s %pR\n",
+ &child->busn_res,
+ (bus->number > child->busn_res.end &&
+ bus->busn_res.end < child->number) ?
"wholly" : "partially",
bus->self->transparent ? " transparent" : "",
dev_name(&bus->dev),
- bus->number, bus->subordinate);
+ &bus->busn_res);
}
bus = bus->parent;
}
@@ -1551,7 +1591,7 @@
unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
{
- unsigned int devfn, pass, max = bus->secondary;
+ unsigned int devfn, pass, max = bus->busn_res.start;
struct pci_dev *dev;
dev_dbg(&bus->dev, "scanning bus\n");
@@ -1645,7 +1685,7 @@
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(b);
- b->number = b->secondary = bus;
+ b->number = b->busn_res.start = bus;
if (parent)
dev_info(parent, "PCI host bridge to bus %s\n", dev_name(&b->dev));
@@ -1657,7 +1697,10 @@
list_move_tail(&window->list, &bridge->windows);
res = window->res;
offset = window->offset;
- pci_bus_add_resource(b, res, 0);
+ if (res->flags & IORESOURCE_BUS)
+ pci_bus_insert_busn_res(b, bus, res->end);
+ else
+ pci_bus_add_resource(b, res, 0);
if (offset) {
if (resource_type(res) == IORESOURCE_IO)
fmt = " (bus address [%#06llx-%#06llx])";
@@ -1687,16 +1730,104 @@
return NULL;
}
+int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
+{
+ struct resource *res = &b->busn_res;
+ struct resource *parent_res, *conflict;
+
+ res->start = bus;
+ res->end = bus_max;
+ res->flags = IORESOURCE_BUS;
+
+ if (!pci_is_root_bus(b))
+ parent_res = &b->parent->busn_res;
+ else {
+ parent_res = get_pci_domain_busn_res(pci_domain_nr(b));
+ res->flags |= IORESOURCE_PCI_FIXED;
+ }
+
+ conflict = insert_resource_conflict(parent_res, res);
+
+ if (conflict)
+ dev_printk(KERN_DEBUG, &b->dev,
+ "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n",
+ res, pci_is_root_bus(b) ? "domain " : "",
+ parent_res, conflict->name, conflict);
+ else
+ dev_printk(KERN_DEBUG, &b->dev,
+ "busn_res: %pR is inserted under %s%pR\n",
+ res, pci_is_root_bus(b) ? "domain " : "",
+ parent_res);
+
+ return conflict == NULL;
+}
+
+int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max)
+{
+ struct resource *res = &b->busn_res;
+ struct resource old_res = *res;
+ resource_size_t size;
+ int ret;
+
+ if (res->start > bus_max)
+ return -EINVAL;
+
+ size = bus_max - res->start + 1;
+ ret = adjust_resource(res, res->start, size);
+ dev_printk(KERN_DEBUG, &b->dev,
+ "busn_res: %pR end %s updated to %02x\n",
+ &old_res, ret ? "can not be" : "is", bus_max);
+
+ if (!ret && !res->parent)
+ pci_bus_insert_busn_res(b, res->start, res->end);
+
+ return ret;
+}
+
+void pci_bus_release_busn_res(struct pci_bus *b)
+{
+ struct resource *res = &b->busn_res;
+ int ret;
+
+ if (!res->flags || !res->parent)
+ return;
+
+ ret = release_resource(res);
+ dev_printk(KERN_DEBUG, &b->dev,
+ "busn_res: %pR %s released\n",
+ res, ret ? "can not be" : "is");
+}
+
struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata, struct list_head *resources)
{
+ struct pci_host_bridge_window *window;
+ bool found = false;
struct pci_bus *b;
+ int max;
+
+ list_for_each_entry(window, resources, list)
+ if (window->res->flags & IORESOURCE_BUS) {
+ found = true;
+ break;
+ }
b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
if (!b)
return NULL;
- b->subordinate = pci_scan_child_bus(b);
+ if (!found) {
+ dev_info(&b->dev,
+ "No busn resource found for root bus, will use [bus %02x-ff]\n",
+ bus);
+ pci_bus_insert_busn_res(b, bus, 255);
+ }
+
+ max = pci_scan_child_bus(b);
+
+ if (!found)
+ pci_bus_update_busn_res_end(b, max);
+
pci_bus_add_devices(b);
return b;
}
@@ -1711,9 +1842,10 @@
pci_add_resource(&resources, &ioport_resource);
pci_add_resource(&resources, &iomem_resource);
+ pci_add_resource(&resources, &busn_resource);
b = pci_create_root_bus(parent, bus, ops, sysdata, &resources);
if (b)
- b->subordinate = pci_scan_child_bus(b);
+ pci_scan_child_bus(b);
else
pci_free_resource_list(&resources);
return b;
@@ -1728,9 +1860,10 @@
pci_add_resource(&resources, &ioport_resource);
pci_add_resource(&resources, &iomem_resource);
+ pci_add_resource(&resources, &busn_resource);
b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
if (b) {
- b->subordinate = pci_scan_child_bus(b);
+ pci_scan_child_bus(b);
pci_bus_add_devices(b);
} else {
pci_free_resource_list(&resources);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 356846b..52f44b5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -253,7 +253,7 @@
* workaround applied too
* [Info kindly provided by ALi]
*/
-static void __init quirk_alimagik(struct pci_dev *dev)
+static void __devinit quirk_alimagik(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -789,7 +789,7 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
-static void __init quirk_ioapic_rmw(struct pci_dev *dev)
+static void __devinit quirk_ioapic_rmw(struct pci_dev *dev)
{
if (dev->devfn == 0 && dev->bus->number == 0)
sis_apic_bug = 1;
@@ -801,7 +801,7 @@
* Some settings of MMRBC can lead to data corruption so block changes.
* See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
*/
-static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
+static void __devinit quirk_amd_8131_mmrbc(struct pci_dev *dev)
{
if (dev->subordinate && dev->revision <= 0x12) {
dev_info(&dev->dev, "AMD8131 rev %x detected; "
@@ -1039,7 +1039,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
-static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
+static void quirk_amd_ide_mode(struct pci_dev *pdev)
{
/* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
u8 tmp;
@@ -1082,7 +1082,7 @@
/*
* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
*/
-static void __init quirk_ide_samemode(struct pci_dev *pdev)
+static void __devinit quirk_ide_samemode(struct pci_dev *pdev)
{
u8 prog;
@@ -1121,7 +1121,7 @@
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
*/
-static void __init quirk_eisa_bridge(struct pci_dev *dev)
+static void __devinit quirk_eisa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_EISA << 8;
}
@@ -1155,7 +1155,7 @@
*/
static int asus_hides_smbus;
-static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
+static void __devinit asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
@@ -1538,7 +1538,7 @@
#endif
#ifdef CONFIG_X86_IO_APIC
-static void __init quirk_alder_ioapic(struct pci_dev *pdev)
+static void __devinit quirk_alder_ioapic(struct pci_dev *pdev)
{
int i;
@@ -1777,7 +1777,7 @@
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
* Re-allocate the region if needed...
*/
-static void __init quirk_tc86c001_ide(struct pci_dev *dev)
+static void __devinit quirk_tc86c001_ide(struct pci_dev *dev)
{
struct resource *r = &dev->resource[0];
@@ -2067,7 +2067,7 @@
PCI_DEVICE_ID_NX2_5709S,
quirk_brcm_570x_limit_vpd);
-static void __devinit quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
+static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
{
u32 rev;
@@ -2132,7 +2132,7 @@
* aware of it. Instead of setting the flag on all busses in the
* machine, simply disable MSI globally.
*/
-static void __init quirk_disable_all_msi(struct pci_dev *dev)
+static void __devinit quirk_disable_all_msi(struct pci_dev *dev)
{
pci_no_msi();
dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n");
@@ -2180,7 +2180,7 @@
/* Go through the list of Hypertransport capabilities and
* return 1 if a HT MSI capability is found and enabled */
-static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
+static int msi_ht_cap_enabled(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -2204,7 +2204,7 @@
}
/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
-static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
+static void quirk_msi_ht_cap(struct pci_dev *dev)
{
if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
dev_warn(&dev->dev, "MSI quirk detected; "
@@ -2218,7 +2218,7 @@
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
*/
-static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
+static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
{
struct pci_dev *pdev;
@@ -2242,7 +2242,7 @@
quirk_nvidia_ck804_msi_ht_cap);
/* Force enable MSI mapping capability on HT bridges */
-static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)
+static void ht_enable_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -2322,7 +2322,7 @@
PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
nvbridge_check_legacy_irq_routing);
-static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+static int ht_check_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
int found = 0;
@@ -2350,7 +2350,7 @@
return found;
}
-static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)
+static int host_bridge_with_leaf(struct pci_dev *host_bridge)
{
struct pci_dev *dev;
int pos;
@@ -2384,7 +2384,7 @@
#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
-static int __devinit is_end_of_ht_chain(struct pci_dev *dev)
+static int is_end_of_ht_chain(struct pci_dev *dev)
{
int pos, ctrl_off;
int end = 0;
@@ -2408,7 +2408,7 @@
return end;
}
-static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
+static void nv_ht_enable_msi_mapping(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
int pos;
@@ -2447,7 +2447,7 @@
pci_dev_put(host_bridge);
}
-static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+static void ht_disable_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -2467,7 +2467,7 @@
}
}
-static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
+static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
{
struct pci_dev *host_bridge;
int pos;
@@ -2504,23 +2504,26 @@
else
nv_ht_enable_msi_mapping(dev);
}
- return;
+ goto out;
}
/* HT MSI is not enabled */
if (found == 1)
- return;
+ goto out;
/* Host bridge is not to HT, disable HT MSI mapping on this device */
ht_disable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
}
-static void __devinit nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
+static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
{
return __nv_msi_ht_cap_quirk(dev, 1);
}
-static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
+static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
{
return __nv_msi_ht_cap_quirk(dev, 0);
}
@@ -2842,20 +2845,34 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
-static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev *dev)
+static ktime_t fixup_debug_start(struct pci_dev *dev,
+ void (*fn)(struct pci_dev *dev))
{
- ktime_t calltime, delta, rettime;
+ ktime_t calltime = ktime_set(0, 0);
+
+ dev_dbg(&dev->dev, "calling %pF\n", fn);
+ if (initcall_debug) {
+ pr_debug("calling %pF @ %i for %s\n",
+ fn, task_pid_nr(current), dev_name(&dev->dev));
+ calltime = ktime_get();
+ }
+
+ return calltime;
+}
+
+static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
+ void (*fn)(struct pci_dev *dev))
+{
+ ktime_t delta, rettime;
unsigned long long duration;
- printk(KERN_DEBUG "calling %pF @ %i for %s\n",
- fn, task_pid_nr(current), dev_name(&dev->dev));
- calltime = ktime_get();
- fn(dev);
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
- printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs for %s\n",
- fn, duration, dev_name(&dev->dev));
+ if (initcall_debug) {
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ pr_debug("pci fixup %pF returned after %lld usecs for %s\n",
+ fn, duration, dev_name(&dev->dev));
+ }
}
/*
@@ -2892,9 +2909,25 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+/*
+ * Some devices may pass our check in pci_intx_mask_supported if
+ * PCI_COMMAND_INTX_DISABLE works though they actually do not properly
+ * support this feature.
+ */
+static void __devinit quirk_broken_intx_masking(struct pci_dev *dev)
+{
+ dev->broken_intx_masking = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030,
+ quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
+ quirk_broken_intx_masking);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
+ ktime_t calltime;
+
for (; f < end; f++)
if ((f->class == (u32) (dev->class >> f->class_shift) ||
f->class == (u32) PCI_ANY_ID) &&
@@ -2902,11 +2935,9 @@
f->vendor == (u16) PCI_ANY_ID) &&
(f->device == dev->device ||
f->device == (u16) PCI_ANY_ID)) {
- dev_dbg(&dev->dev, "calling %pF\n", f->hook);
- if (initcall_debug)
- do_one_fixup_debug(f->hook, dev);
- else
- f->hook(dev);
+ calltime = fixup_debug_start(dev, f->hook);
+ f->hook(dev);
+ fixup_debug_report(dev, calltime, f->hook);
}
}
@@ -2974,6 +3005,22 @@
}
EXPORT_SYMBOL(pci_fixup_device);
+
+/*
+ * The global variable 'pci_fixup_final_inited' is being used as a interim
+ * solution for calling the final quirks only during hot-plug events (not
+ * during boot processing).
+ *
+ * When the boot path's PCI device setup sequencing is addressed, we can
+ * remove the instance, and usages of, 'pci_fixup_final_inited' along with
+ * removing 'fs_initcall_sync(pci_apply_final_quirks);' and end up with a
+ * single, uniform, solution that satisfies both the boot path and the
+ * various hot-plug event paths.
+ *
+ * ToDo: Remove 'pci_fixup_final_inited'
+ */
+bool pci_fixup_final_inited;
+
static int __init pci_apply_final_quirks(void)
{
struct pci_dev *dev = NULL;
@@ -3004,6 +3051,8 @@
pci_cache_line_size = pci_dfl_cache_line_size;
}
}
+ pci_fixup_final_inited = 1;
+
if (!pci_cache_line_size) {
printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
cls << 2, pci_dfl_cache_line_size << 2);
@@ -3142,3 +3191,87 @@
return -ENOTTY;
}
+
+static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev)
+{
+ if (!PCI_FUNC(dev->devfn))
+ return pci_dev_get(dev);
+
+ return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+}
+
+static const struct pci_dev_dma_source {
+ u16 vendor;
+ u16 device;
+ struct pci_dev *(*dma_source)(struct pci_dev *dev);
+} pci_dev_dma_source[] = {
+ /*
+ * https://bugzilla.redhat.com/show_bug.cgi?id=605888
+ *
+ * Some Ricoh devices use the function 0 source ID for DMA on
+ * other functions of a multifunction device. The DMA devices
+ * is therefore function 0, which will have implications of the
+ * iommu grouping of these devices.
+ */
+ { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source },
+ { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source },
+ { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source },
+ { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source },
+ { 0 }
+};
+
+/*
+ * IOMMUs with isolation capabilities need to be programmed with the
+ * correct source ID of a device. In most cases, the source ID matches
+ * the device doing the DMA, but sometimes hardware is broken and will
+ * tag the DMA as being sourced from a different device. This function
+ * allows that translation. Note that the reference count of the
+ * returned device is incremented on all paths.
+ */
+struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
+{
+ const struct pci_dev_dma_source *i;
+
+ for (i = pci_dev_dma_source; i->dma_source; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID))
+ return i->dma_source(dev);
+ }
+
+ return pci_dev_get(dev);
+}
+
+static const struct pci_dev_acs_enabled {
+ u16 vendor;
+ u16 device;
+ int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags);
+} pci_dev_acs_enabled[] = {
+ { 0 }
+};
+
+int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags)
+{
+ const struct pci_dev_acs_enabled *i;
+ int ret;
+
+ /*
+ * Allow devices that do not expose standard PCIe ACS capabilities
+ * or control to indicate their support here. Multi-function express
+ * devices which do not allow internal peer-to-peer between functions,
+ * but do not implement PCIe ACS may wish to return true here.
+ */
+ for (i = pci_dev_acs_enabled; i->acs_enabled; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID)) {
+ ret = i->acs_enabled(dev, acs_flags);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index fd77e2b..04a4861 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -68,6 +68,7 @@
down_write(&pci_bus_sem);
list_del(&pci_bus->node);
+ pci_bus_release_busn_res(pci_bus);
up_write(&pci_bus_sem);
if (!pci_bus->is_added)
return;
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 9d75dc8..993d4a0a 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -15,6 +15,8 @@
#include "pci.h"
DECLARE_RWSEM(pci_bus_sem);
+EXPORT_SYMBOL_GPL(pci_bus_sem);
+
/*
* find the upstream PCIe-to-PCI bridge of a PCI device
* if the device is PCIE, return NULL
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index eb0293e..fdb1177 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -265,7 +265,7 @@
* assign_requested_resources_sorted() - satisfy resource requests
*
* @head : head of the list tracking requests for resources
- * @failed_list : head of the list tracking requests that could
+ * @fail_head : head of the list tracking requests that could
* not be allocated
*
* Satisfy resource requests of each element in the list. Add
@@ -404,8 +404,8 @@
struct resource *res;
struct pci_bus_region region;
- dev_info(&bridge->dev, "CardBus bridge to [bus %02x-%02x]\n",
- bus->secondary, bus->subordinate);
+ dev_info(&bridge->dev, "CardBus bridge to %pR\n",
+ &bus->busn_res);
res = bus->resource[0];
pcibios_resource_to_bus(bridge, ®ion, res);
@@ -560,8 +560,8 @@
{
struct pci_dev *bridge = bus->self;
- dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
- bus->secondary, bus->subordinate);
+ dev_info(&bridge->dev, "PCI bridge to %pR\n",
+ &bus->busn_res);
if (type & IORESOURCE_IO)
pci_setup_bridge_io(bus);
@@ -767,8 +767,8 @@
if (!size0 && !size1) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window "
- "%pR to [bus %02x-%02x] (unused)\n", b_res,
- bus->secondary, bus->subordinate);
+ "%pR to %pR (unused)\n", b_res,
+ &bus->busn_res);
b_res->flags = 0;
return;
}
@@ -780,8 +780,8 @@
add_to_list(realloc_head, bus->self, b_res, size1-size0,
min_align);
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window "
- "%pR to [bus %02x-%02x] add_size %lx\n", b_res,
- bus->secondary, bus->subordinate, size1-size0);
+ "%pR to %pR add_size %lx\n", b_res,
+ &bus->busn_res, size1-size0);
}
}
@@ -886,8 +886,8 @@
if (!size0 && !size1) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window "
- "%pR to [bus %02x-%02x] (unused)\n", b_res,
- bus->secondary, bus->subordinate);
+ "%pR to %pR (unused)\n", b_res,
+ &bus->busn_res);
b_res->flags = 0;
return 1;
}
@@ -897,8 +897,8 @@
if (size1 > size0 && realloc_head) {
add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align);
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window "
- "%pR to [bus %02x-%02x] add_size %llx\n", b_res,
- bus->secondary, bus->subordinate, (unsigned long long)size1-size0);
+ "%pR to %pR add_size %llx\n", b_res,
+ &bus->busn_res, (unsigned long long)size1-size0);
}
return 1;
}
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index eea85da..1a0e60e 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -30,6 +30,8 @@
void pci_update_resource(struct pci_dev *dev, int resno)
{
struct pci_bus_region region;
+ bool disable;
+ u16 cmd;
u32 new, check, mask;
int reg;
enum pci_bar_type type;
@@ -67,6 +69,18 @@
new |= PCI_ROM_ADDRESS_ENABLE;
}
+ /*
+ * We can't update a 64-bit BAR atomically, so when possible,
+ * disable decoding so that a half-updated BAR won't conflict
+ * with another device.
+ */
+ disable = (res->flags & IORESOURCE_MEM_64) && !dev->mmio_always_on;
+ if (disable) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ pci_write_config_word(dev, PCI_COMMAND,
+ cmd & ~PCI_COMMAND_MEMORY);
+ }
+
pci_write_config_dword(dev, reg, new);
pci_read_config_dword(dev, reg, &check);
@@ -84,6 +98,10 @@
"(high %#08x != %#08x)\n", resno, new, check);
}
}
+
+ if (disable)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
res->flags &= ~IORESOURCE_UNSET;
dev_dbg(&dev->dev, "BAR %d: set to %pR (PCI address [%#llx-%#llx])\n",
resno, res, (unsigned long long)region.start,
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 6e75153..24caeaf 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -73,7 +73,7 @@
s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0));
pci_fixup_cardbus(bus);
- max = bus->secondary;
+ max = bus->busn_res.start;
for (pass = 0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list)
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index d07f9ac..667678d 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1048,8 +1048,8 @@
config_writeb(socket, PCI_LATENCY_TIMER, 168);
config_writel(socket, PCI_PRIMARY_BUS,
(176 << 24) | /* sec. latency timer */
- (dev->subordinate->subordinate << 16) | /* subordinate bus */
- (dev->subordinate->secondary << 8) | /* secondary bus */
+ ((unsigned int)dev->subordinate->busn_res.end << 16) | /* subordinate bus */
+ ((unsigned int)dev->subordinate->busn_res.start << 8) | /* secondary bus */
dev->subordinate->primary); /* primary bus */
/*
@@ -1086,14 +1086,14 @@
struct pci_bus *bridge_to_fix = cardbus_bridge->parent;
/* Check bus numbers are already set up correctly: */
- if (bridge_to_fix->subordinate >= cardbus_bridge->subordinate)
+ if (bridge_to_fix->busn_res.end >= cardbus_bridge->busn_res.end)
return; /* The subordinate number is ok, nothing to do */
if (!bridge_to_fix->parent)
return; /* Root bridges are ok */
/* stay within the limits of the bus range of the parent: */
- upper_limit = bridge_to_fix->parent->subordinate;
+ upper_limit = bridge_to_fix->parent->busn_res.end;
/* check the bus ranges of all silbling bridges to prevent overlap */
list_for_each(tmp, &bridge_to_fix->parent->children) {
@@ -1104,36 +1104,36 @@
* current upper limit, set the new upper limit to
* the bus number below the silbling's range:
*/
- if (silbling->secondary > bridge_to_fix->subordinate
- && silbling->secondary <= upper_limit)
- upper_limit = silbling->secondary - 1;
+ if (silbling->busn_res.start > bridge_to_fix->busn_res.end
+ && silbling->busn_res.start <= upper_limit)
+ upper_limit = silbling->busn_res.start - 1;
}
/* Show that the wanted subordinate number is not possible: */
- if (cardbus_bridge->subordinate > upper_limit)
+ if (cardbus_bridge->busn_res.end > upper_limit)
dev_printk(KERN_WARNING, &cardbus_bridge->dev,
"Upper limit for fixing this "
"bridge's parent bridge: #%02x\n", upper_limit);
/* If we have room to increase the bridge's subordinate number, */
- if (bridge_to_fix->subordinate < upper_limit) {
+ if (bridge_to_fix->busn_res.end < upper_limit) {
/* use the highest number of the hidden bus, within limits */
unsigned char subordinate_to_assign =
- min(cardbus_bridge->subordinate, upper_limit);
+ min_t(int, cardbus_bridge->busn_res.end, upper_limit);
dev_printk(KERN_INFO, &bridge_to_fix->dev,
"Raising subordinate bus# of parent "
"bus (#%02x) from #%02x to #%02x\n",
bridge_to_fix->number,
- bridge_to_fix->subordinate, subordinate_to_assign);
+ (int)bridge_to_fix->busn_res.end, subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
- bridge_to_fix->subordinate = subordinate_to_assign;
+ bridge_to_fix->busn_res.end = subordinate_to_assign;
/* and update the PCI config space with the new subordinate */
pci_write_config_byte(bridge_to_fix->self,
- PCI_SUBORDINATE_BUS, bridge_to_fix->subordinate);
+ PCI_SUBORDINATE_BUS, bridge_to_fix->busn_res.end);
}
}
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index d21e8f5..507a8e2 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -170,8 +170,8 @@
}
if (acpi_bus_power_manageable(handle)) {
- int power_state = acpi_pm_device_sleep_state(&dev->dev, NULL);
-
+ int power_state = acpi_pm_device_sleep_state(&dev->dev, NULL,
+ ACPI_STATE_D3);
if (power_state < 0)
power_state = (state.event == PM_EVENT_ON) ?
ACPI_STATE_D0 : ACPI_STATE_D3;
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 30d7be0..46ae0f9 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -124,7 +124,7 @@
return val;
}
-static int pcibios_err_to_errno(int err)
+static int xen_pcibios_err_to_errno(int err)
{
switch (err) {
case PCIBIOS_SUCCESSFUL:
@@ -202,7 +202,7 @@
pci_name(dev), size, offset, value);
*ret_val = value;
- return pcibios_err_to_errno(err);
+ return xen_pcibios_err_to_errno(err);
}
int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value)
@@ -290,7 +290,7 @@
}
}
- return pcibios_err_to_errno(err);
+ return xen_pcibios_err_to_errno(err);
}
void xen_pcibk_config_free_dyn_fields(struct pci_dev *dev)
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 38f5088..b177f97 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -62,6 +62,7 @@
#define METHOD_NAME__AEI "_AEI"
#define METHOD_NAME__PRW "_PRW"
#define METHOD_NAME__SRS "_SRS"
+#define METHOD_NAME__CBA "_CBA"
/* Method names - these methods must appear at the namespace root */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 9e6e1c6..6a6c46e 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -401,6 +401,7 @@
u32 osc_support_set; /* _OSC state of support bits */
u32 osc_control_set; /* _OSC state of control bits */
+ phys_addr_t mcfg_addr;
};
/* helper */
@@ -414,13 +415,13 @@
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
#ifdef CONFIG_PM
-int acpi_pm_device_sleep_state(struct device *, int *);
+int acpi_pm_device_sleep_state(struct device *, int *, int);
#else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
{
if (p)
*p = ACPI_STATE_D0;
- return ACPI_STATE_D3;
+ return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
}
#endif
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 4462350..248fba2 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -17,6 +17,7 @@
extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
struct pci_dev *pci_dev);
extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev);
+extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
{
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 89b46fd..5faa831 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -132,9 +132,10 @@
return pci_power_names[1 + (int) state];
}
-#define PCI_PM_D2_DELAY 200
-#define PCI_PM_D3_WAIT 10
-#define PCI_PM_BUS_WAIT 50
+#define PCI_PM_D2_DELAY 200
+#define PCI_PM_D3_WAIT 10
+#define PCI_PM_D3COLD_WAIT 100
+#define PCI_PM_BUS_WAIT 50
/** The pci_channel state describes connectivity between the CPU and
* the pci device. If some PCI bus between here and the pci device
@@ -278,11 +279,18 @@
unsigned int pme_poll:1; /* Poll device's PME status bit */
unsigned int d1_support:1; /* Low power state D1 is supported */
unsigned int d2_support:1; /* Low power state D2 is supported */
- unsigned int no_d1d2:1; /* Only allow D0 and D3 */
+ unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
+ unsigned int no_d3cold:1; /* D3cold is forbidden */
+ unsigned int d3cold_allowed:1; /* D3cold is allowed by user */
unsigned int mmio_always_on:1; /* disallow turning off io/mem
decoding during bar sizing */
unsigned int wakeup_prepared:1;
+ unsigned int runtime_d3cold:1; /* whether go through runtime
+ D3cold, not set for devices
+ powered on/off by the
+ corresponding bridge */
unsigned int d3_delay; /* D3->D0 transition time in ms */
+ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
#ifdef CONFIG_PCIEASPM
struct pcie_link_state *link_state; /* ASPM link state. */
@@ -324,6 +332,7 @@
unsigned int is_hotplug_bridge:1;
unsigned int __aer_firmware_first_valid:1;
unsigned int __aer_firmware_first:1;
+ unsigned int broken_intx_masking:1;
unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */
pci_dev_flags_t dev_flags;
atomic_t enable_cnt; /* pci_enable_device has been called */
@@ -369,6 +378,8 @@
return (pdev->error_state != pci_channel_io_normal);
}
+extern struct resource busn_resource;
+
struct pci_host_bridge_window {
struct list_head list;
struct resource *res; /* host bridge aperture (CPU address) */
@@ -420,6 +431,7 @@
struct list_head slots; /* list of slots on this bus */
struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
struct list_head resources; /* address space routed to this bus */
+ struct resource busn_res; /* bus numbers routed to this bus */
struct pci_ops *ops; /* configuration access functions */
void *sysdata; /* hook for sys-specific extension */
@@ -427,8 +439,6 @@
unsigned char number; /* bus number */
unsigned char primary; /* number of primary bridge */
- unsigned char secondary; /* number of secondary bridge */
- unsigned char subordinate; /* max number of subordinate buses */
unsigned char max_bus_speed; /* enum pci_bus_speed */
unsigned char cur_bus_speed; /* enum pci_bus_speed */
@@ -475,6 +485,32 @@
#define PCIBIOS_SET_FAILED 0x88
#define PCIBIOS_BUFFER_TOO_SMALL 0x89
+/*
+ * Translate above to generic errno for passing back through non-pci.
+ */
+static inline int pcibios_err_to_errno(int err)
+{
+ if (err <= PCIBIOS_SUCCESSFUL)
+ return err; /* Assume already errno */
+
+ switch (err) {
+ case PCIBIOS_FUNC_NOT_SUPPORTED:
+ return -ENOENT;
+ case PCIBIOS_BAD_VENDOR_ID:
+ return -EINVAL;
+ case PCIBIOS_DEVICE_NOT_FOUND:
+ return -ENODEV;
+ case PCIBIOS_BAD_REGISTER_NUMBER:
+ return -EFAULT;
+ case PCIBIOS_SET_FAILED:
+ return -EIO;
+ case PCIBIOS_BUFFER_TOO_SMALL:
+ return -ENOSPC;
+ }
+
+ return -ENOTTY;
+}
+
/* Low-level architecture-dependent routines */
struct pci_ops {
@@ -643,6 +679,7 @@
void pcibios_fixup_bus(struct pci_bus *);
int __must_check pcibios_enable_device(struct pci_dev *, int mask);
+/* Architecture specific versions may override this (weak) */
char *pcibios_setup(char *str);
/* Used only when drivers/pci/setup.c is used */
@@ -669,6 +706,9 @@
struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata,
struct list_head *resources);
+int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
+int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
+void pci_bus_release_busn_res(struct pci_bus *b);
struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata,
struct list_head *resources);
@@ -715,8 +755,6 @@
int pci_find_capability(struct pci_dev *dev, int cap);
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability(struct pci_dev *dev, int cap);
-int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
- int cap);
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
@@ -778,6 +816,14 @@
return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
}
+/* user-space driven config access */
+int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
+int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
+int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
+int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
+int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
+int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
+
int __must_check pci_enable_device(struct pci_dev *dev);
int __must_check pci_enable_device_io(struct pci_dev *dev);
int __must_check pci_enable_device_mem(struct pci_dev *dev);
@@ -876,7 +922,6 @@
int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
void pci_disable_obff(struct pci_dev *dev);
-bool pci_ltr_supported(struct pci_dev *dev);
int pci_enable_ltr(struct pci_dev *dev);
void pci_disable_ltr(struct pci_dev *dev);
int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns);
@@ -1333,6 +1378,9 @@
static inline int pci_domain_nr(struct pci_bus *bus)
{ return 0; }
+static inline struct pci_dev *pci_dev_get(struct pci_dev *dev)
+{ return NULL; }
+
#define dev_is_pci(d) (false)
#define dev_is_pf(d) (false)
#define dev_num_vf(d) (0)
@@ -1487,9 +1535,20 @@
#ifdef CONFIG_PCI_QUIRKS
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
+struct pci_dev *pci_get_dma_source(struct pci_dev *dev);
+int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
#else
static inline void pci_fixup_device(enum pci_fixup_pass pass,
struct pci_dev *dev) {}
+static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
+{
+ return pci_dev_get(dev);
+}
+static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
+ u16 acs_flags)
+{
+ return -ENOTTY;
+}
#endif
void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
@@ -1592,7 +1651,9 @@
}
void pci_request_acs(void);
-
+bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
+bool pci_acs_path_enabled(struct pci_dev *start,
+ struct pci_dev *end, u16 acs_flags);
#define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */
#define PCI_VPD_LRDT_ID(x) (x | PCI_VPD_LRDT)
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 88c9ea5..53274bf 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -26,6 +26,7 @@
* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
*/
+#define PCI_STD_HEADER_SIZEOF 64
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
@@ -210,9 +211,12 @@
#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
+#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
+#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_ID_MAX PCI_CAP_ID_AF
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
#define PCI_CAP_SIZEOF 4
@@ -277,6 +281,7 @@
#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */
#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
#define PCI_VPD_DATA 4 /* 32-bits of data returned here */
+#define PCI_CAP_VPD_SIZEOF 8
/* Slot Identification */
@@ -298,8 +303,10 @@
#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */
#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */
/* MSI-X registers */
#define PCI_MSIX_FLAGS 2
@@ -309,6 +316,7 @@
#define PCI_MSIX_TABLE 4
#define PCI_MSIX_PBA 8
#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
+#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
/* MSI-X entry's format */
#define PCI_MSIX_ENTRY_SIZE 16
@@ -339,6 +347,7 @@
#define PCI_AF_CTRL_FLR 0x01
#define PCI_AF_STATUS 5
#define PCI_AF_STATUS_TP 0x01
+#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */
/* PCI-X registers */
@@ -375,6 +384,10 @@
#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
+#define PCI_X_ECC_CSR 8 /* ECC control and status */
+#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */
+#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */
+#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */
/* PCI Bridge Subsystem ID registers */
@@ -463,6 +476,7 @@
#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */
#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
@@ -508,6 +522,12 @@
#define PCI_EXP_RTSTA 32 /* Root Status */
#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+/*
+ * Note that the following PCI Express 'Capability Structure' registers
+ * were introduced with 'Capability Version' 0x2 (v2). These registers
+ * do not exist on devices with Capability Version 1. Use pci_pcie_cap2()
+ * to use these fields safely.
+ */
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
@@ -522,6 +542,7 @@
#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
@@ -530,23 +551,43 @@
#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
-#define PCI_EXT_CAP_ID_ERR 1
-#define PCI_EXT_CAP_ID_VC 2
-#define PCI_EXT_CAP_ID_DSN 3
-#define PCI_EXT_CAP_ID_PWR 4
-#define PCI_EXT_CAP_ID_VNDR 11
-#define PCI_EXT_CAP_ID_ACS 13
-#define PCI_EXT_CAP_ID_ARI 14
-#define PCI_EXT_CAP_ID_ATS 15
-#define PCI_EXT_CAP_ID_SRIOV 16
-#define PCI_EXT_CAP_ID_PRI 19
-#define PCI_EXT_CAP_ID_LTR 24
-#define PCI_EXT_CAP_ID_PASID 27
+#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */
+#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */
+#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */
+#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */
+#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */
+#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */
+#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */
+#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
+#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
+#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
+#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */
+#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
+#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
+#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
+#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */
+#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
+#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
+#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */
+#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */
+#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */
+#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */
+#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */
+#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
+#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
+
+#define PCI_EXT_CAP_DSN_SIZEOF 12
+#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
/* Advanced Error Reporting */
#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
+#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */
#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
@@ -556,6 +597,11 @@
#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
+#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */
+#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */
+#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */
+#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */
+#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */
#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
/* Same bits as above */
#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
@@ -566,6 +612,9 @@
#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
+#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */
+#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */
+#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */
#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
/* Same bits as above */
#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
@@ -597,12 +646,18 @@
/* Virtual Channel */
#define PCI_VC_PORT_REG1 4
+#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */
#define PCI_VC_PORT_REG2 8
+#define PCI_VC_REG2_32_PHASE 0x2
+#define PCI_VC_REG2_64_PHASE 0x4
+#define PCI_VC_REG2_128_PHASE 0x8
#define PCI_VC_PORT_CTRL 12
#define PCI_VC_PORT_STATUS 14
#define PCI_VC_RES_CAP 16
#define PCI_VC_RES_CTRL 20
#define PCI_VC_RES_STATUS 26
+#define PCI_CAP_VC_BASE_SIZEOF 0x10
+#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
/* Power Budgeting */
#define PCI_PWR_DSR 4 /* Data Select Register */
@@ -615,6 +670,7 @@
#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
#define PCI_PWR_CAP 12 /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
+#define PCI_EXT_CAP_PWR_SIZEOF 16
/*
* Hypertransport sub capability types
@@ -647,6 +703,8 @@
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */
+#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */
/* Alternative Routing-ID Interpretation */
#define PCI_ARI_CAP 0x04 /* ARI Capability Register */
@@ -657,6 +715,7 @@
#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */
#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */
#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */
+#define PCI_EXT_CAP_ARI_SIZEOF 8
/* Address Translation Service */
#define PCI_ATS_CAP 0x04 /* ATS Capability Register */
@@ -666,6 +725,7 @@
#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */
#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
+#define PCI_EXT_CAP_ATS_SIZEOF 8
/* Page Request Interface */
#define PCI_PRI_CTRL 0x04 /* PRI control register */
@@ -677,6 +737,7 @@
#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */
#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */
#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
+#define PCI_EXT_CAP_PRI_SIZEOF 16
/* PASID capability */
#define PCI_PASID_CAP 0x04 /* PASID feature register */
@@ -686,6 +747,7 @@
#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
#define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */
+#define PCI_EXT_CAP_PASID_SIZEOF 8
/* Single Root I/O Virtualization */
#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
@@ -717,12 +779,14 @@
#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
+#define PCI_EXT_CAP_SRIOV_SIZEOF 64
#define PCI_LTR_MAX_SNOOP_LAT 0x4
#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
#define PCI_LTR_VALUE_MASK 0x000003ff
#define PCI_LTR_SCALE_MASK 0x00001c00
#define PCI_LTR_SCALE_SHIFT 10
+#define PCI_EXT_CAP_LTR_SIZEOF 8
/* Access Control Service */
#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
@@ -733,7 +797,38 @@
#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
#define PCI_ACS_EC 0x20 /* P2P Egress Control */
#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
+#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */
#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
+#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */
+#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */
+
+/* sata capability */
+#define PCI_SATA_REGS 4 /* SATA REGs specifier */
+#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */
+#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */
+#define PCI_SATA_SIZEOF_SHORT 8
+#define PCI_SATA_SIZEOF_LONG 16
+
+/* resizable BARs */
+#define PCI_REBAR_CTRL 8 /* control register */
+#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */
+#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */
+
+/* dynamic power allocation */
+#define PCI_DPA_CAP 4 /* capability register */
+#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */
+#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */
+
+/* TPH Requester */
+#define PCI_TPH_CAP 4 /* capability register */
+#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */
+#define PCI_TPH_LOC_NONE 0x000 /* no location */
+#define PCI_TPH_LOC_CAP 0x200 /* in capability */
+#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
+#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */
+#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
+#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
+
#endif /* LINUX_PCI_REGS_H */
diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h
index c4a5a8c..631af63 100644
--- a/include/linux/sfi_acpi.h
+++ b/include/linux/sfi_acpi.h
@@ -66,7 +66,7 @@
char *oem_table_id,
int (*handler)(struct acpi_table_header *));
-static inline int acpi_sfi_table_parse(char *signature,
+static inline int __init acpi_sfi_table_parse(char *signature,
int (*handler)(struct acpi_table_header *))
{
if (!acpi_table_parse(signature, handler))
@@ -83,7 +83,7 @@
return -1;
}
-static inline int acpi_sfi_table_parse(char *signature,
+static inline int __init acpi_sfi_table_parse(char *signature,
int (*handler)(struct acpi_table_header *))
{
return acpi_table_parse(signature, handler);
diff --git a/kernel/resource.c b/kernel/resource.c
index e1d2b8e..dc8b477 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -722,14 +722,12 @@
write_lock(&resource_lock);
+ if (!parent)
+ goto skip;
+
if ((start < parent->start) || (end > parent->end))
goto out;
- for (tmp = res->child; tmp; tmp = tmp->sibling) {
- if ((tmp->start < start) || (tmp->end > end))
- goto out;
- }
-
if (res->sibling && (res->sibling->start <= end))
goto out;
@@ -741,6 +739,11 @@
goto out;
}
+skip:
+ for (tmp = res->child; tmp; tmp = tmp->sibling)
+ if ((tmp->start < start) || (tmp->end > end))
+ goto out;
+
res->start = start;
res->end = end;
result = 0;
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 0f84bb3..68e9f5ed 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -865,6 +865,11 @@
#define ALL_EXIT_TEXT_SECTIONS \
".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$"
+#define ALL_PCI_INIT_SECTIONS \
+ ".pci_fixup_early$", ".pci_fixup_header$", ".pci_fixup_final$", \
+ ".pci_fixup_enable$", ".pci_fixup_resume$", \
+ ".pci_fixup_resume_early$", ".pci_fixup_suspend$"
+
#define ALL_XXXINIT_SECTIONS DEV_INIT_SECTIONS, CPU_INIT_SECTIONS, \
MEM_INIT_SECTIONS
#define ALL_XXXEXIT_SECTIONS DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, \
@@ -1027,6 +1032,12 @@
.mismatch = ANY_EXIT_TO_ANY_INIT,
.symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
+{
+ .fromsec = { ALL_PCI_INIT_SECTIONS, NULL },
+ .tosec = { INIT_SECTIONS, NULL },
+ .mismatch = ANY_INIT_TO_ANY_EXIT,
+ .symbol_white_list = { NULL },
+},
/* Do not export init/exit functions or data */
{
.fromsec = { "__ksymtab*", NULL },