| include ../scripts/Makefile.include |
| |
| # The default target of this Makefile is... |
| all: |
| |
| include config/utilities.mak |
| |
| # Define V to have a more verbose compile. |
| # |
| # Define VF to have a more verbose feature check output. |
| # |
| # Define O to save output files in a separate directory. |
| # |
| # Define ARCH as name of target architecture if you want cross-builds. |
| # |
| # Define CROSS_COMPILE as prefix name of compiler if you want cross-builds. |
| # |
| # Define NO_LIBPERL to disable perl script extension. |
| # |
| # Define NO_LIBPYTHON to disable python script extension. |
| # |
| # Define PYTHON to point to the python binary if the default |
| # `python' is not correct; for example: PYTHON=python2 |
| # |
| # Define PYTHON_CONFIG to point to the python-config binary if |
| # the default `$(PYTHON)-config' is not correct. |
| # |
| # Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8 |
| # |
| # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72. |
| # |
| # Define LDFLAGS=-static to build a static binary. |
| # |
| # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds. |
| # |
| # Define NO_DWARF if you do not want debug-info analysis feature at all. |
| # |
| # Define WERROR=0 to disable treating any warnings as errors. |
| # |
| # Define NO_NEWT if you do not want TUI support. (deprecated) |
| # |
| # Define NO_SLANG if you do not want TUI support. |
| # |
| # Define NO_GTK2 if you do not want GTK+ GUI support. |
| # |
| # Define NO_DEMANGLE if you do not want C++ symbol demangling. |
| # |
| # Define NO_LIBELF if you do not want libelf dependency (e.g. cross-builds) |
| # |
| # Define NO_LIBUNWIND if you do not want libunwind dependency for dwarf |
| # backtrace post unwind. |
| # |
| # Define NO_BACKTRACE if you do not want stack backtrace debug feature |
| # |
| # Define NO_LIBNUMA if you do not want numa perf benchmark |
| # |
| # Define NO_LIBAUDIT if you do not want libaudit support |
| # |
| # Define NO_LIBBIONIC if you do not want bionic support |
| # |
| # Define NO_LIBDW_DWARF_UNWIND if you do not want libdw support |
| # for dwarf backtrace post unwind. |
| # |
| # Define NO_PERF_READ_VDSO32 if you do not want to build perf-read-vdso32 |
| # for reading the 32-bit compatibility VDSO in 64-bit mode |
| # |
| # Define NO_PERF_READ_VDSOX32 if you do not want to build perf-read-vdsox32 |
| # for reading the x32 mode 32-bit compatibility VDSO in 64-bit mode |
| # |
| # Define NO_ZLIB if you do not want to support compressed kernel modules |
| |
| |
| ifeq ($(srctree),) |
| srctree := $(patsubst %/,%,$(dir $(shell pwd))) |
| srctree := $(patsubst %/,%,$(dir $(srctree))) |
| #$(info Determined 'srctree' to be $(srctree)) |
| endif |
| |
| ifneq ($(objtree),) |
| #$(info Determined 'objtree' to be $(objtree)) |
| endif |
| |
| ifneq ($(OUTPUT),) |
| #$(info Determined 'OUTPUT' to be $(OUTPUT)) |
| # Adding $(OUTPUT) as a directory to look for source files, |
| # because use generated output files as sources dependency |
| # for flex/bison parsers. |
| VPATH += $(OUTPUT) |
| export VPATH |
| endif |
| |
| # Do not use make's built-in rules |
| # (this improves performance and avoids hard-to-debug behaviour); |
| MAKEFLAGS += -r |
| |
| $(OUTPUT)PERF-VERSION-FILE: ../../.git/HEAD |
| @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT) |
| @touch $(OUTPUT)PERF-VERSION-FILE |
| |
| CC = $(CROSS_COMPILE)gcc |
| LD = $(CROSS_COMPILE)ld |
| AR = $(CROSS_COMPILE)ar |
| PKG_CONFIG = $(CROSS_COMPILE)pkg-config |
| |
| RM = rm -f |
| LN = ln -f |
| MKDIR = mkdir |
| FIND = find |
| INSTALL = install |
| FLEX = flex |
| BISON = bison |
| STRIP = strip |
| |
| LIB_DIR = $(srctree)/tools/lib/api/ |
| TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/ |
| |
| # include config/Makefile by default and rule out |
| # non-config cases |
| config := 1 |
| |
| NON_CONFIG_TARGETS := clean TAGS tags cscope help |
| |
| ifdef MAKECMDGOALS |
| ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),) |
| config := 0 |
| endif |
| endif |
| |
| ifeq ($(config),1) |
| include config/Makefile |
| endif |
| |
| export prefix bindir sharedir sysconfdir DESTDIR |
| |
| # sparse is architecture-neutral, which means that we need to tell it |
| # explicitly what architecture to check for. Fix this up for yours.. |
| SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__ |
| |
| # Guard against environment variables |
| BUILTIN_OBJS = |
| LIB_H = |
| LIB_OBJS = |
| GTK_OBJS = |
| PYRF_OBJS = |
| SCRIPT_SH = |
| |
| SCRIPT_SH += perf-archive.sh |
| SCRIPT_SH += perf-with-kcore.sh |
| |
| grep-libs = $(filter -l%,$(1)) |
| strip-libs = $(filter-out -l%,$(1)) |
| |
| ifneq ($(OUTPUT),) |
| TE_PATH=$(OUTPUT) |
| ifneq ($(subdir),) |
| LIB_PATH=$(OUTPUT)/../lib/api/ |
| else |
| LIB_PATH=$(OUTPUT) |
| endif |
| else |
| TE_PATH=$(TRACE_EVENT_DIR) |
| LIB_PATH=$(LIB_DIR) |
| endif |
| |
| LIBTRACEEVENT = $(TE_PATH)libtraceevent.a |
| export LIBTRACEEVENT |
| |
| LIBAPIKFS = $(LIB_PATH)libapikfs.a |
| export LIBAPIKFS |
| |
| # python extension build directories |
| PYTHON_EXTBUILD := $(OUTPUT)python_ext_build/ |
| PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/ |
| PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/ |
| export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP |
| |
| python-clean := $(call QUIET_CLEAN, python) $(RM) -r $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so |
| |
| PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources) |
| PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py $(LIBTRACEEVENT) $(LIBAPIKFS) |
| |
| $(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) |
| $(QUIET_GEN)CFLAGS='$(CFLAGS)' $(PYTHON_WORD) util/setup.py \ |
| --quiet build_ext; \ |
| mkdir -p $(OUTPUT)python && \ |
| cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/ |
| # |
| # No Perl scripts right now: |
| # |
| |
| SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) |
| |
| PROGRAMS += $(OUTPUT)perf |
| |
| ifndef NO_PERF_READ_VDSO32 |
| PROGRAMS += $(OUTPUT)perf-read-vdso32 |
| endif |
| |
| ifndef NO_PERF_READ_VDSOX32 |
| PROGRAMS += $(OUTPUT)perf-read-vdsox32 |
| endif |
| |
| # what 'all' will build and 'install' will install, in perfexecdir |
| ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS) |
| |
| # what 'all' will build but not install in perfexecdir |
| OTHER_PROGRAMS = $(OUTPUT)perf |
| |
| # Set paths to tools early so that they can be used for version tests. |
| ifndef SHELL_PATH |
| SHELL_PATH = /bin/sh |
| endif |
| ifndef PERL_PATH |
| PERL_PATH = /usr/bin/perl |
| endif |
| |
| export PERL_PATH |
| |
| LIB_FILE=$(OUTPUT)libperf.a |
| |
| LIB_H += ../lib/symbol/kallsyms.h |
| LIB_H += ../../include/uapi/linux/perf_event.h |
| LIB_H += ../../include/linux/rbtree.h |
| LIB_H += ../../include/linux/list.h |
| LIB_H += ../../include/uapi/linux/const.h |
| LIB_H += ../include/linux/hash.h |
| LIB_H += ../../include/linux/stringify.h |
| LIB_H += util/include/linux/bitmap.h |
| LIB_H += ../include/linux/bitops.h |
| LIB_H += ../include/asm-generic/bitops/arch_hweight.h |
| LIB_H += ../include/asm-generic/bitops/atomic.h |
| LIB_H += ../include/asm-generic/bitops/const_hweight.h |
| LIB_H += ../include/asm-generic/bitops/find.h |
| LIB_H += ../include/asm-generic/bitops/fls64.h |
| LIB_H += ../include/asm-generic/bitops/fls.h |
| LIB_H += ../include/asm-generic/bitops/__ffs.h |
| LIB_H += ../include/asm-generic/bitops/__fls.h |
| LIB_H += ../include/asm-generic/bitops/hweight.h |
| LIB_H += ../include/asm-generic/bitops.h |
| LIB_H += ../include/linux/compiler.h |
| LIB_H += ../include/linux/log2.h |
| LIB_H += util/include/linux/const.h |
| LIB_H += util/include/linux/ctype.h |
| LIB_H += util/include/linux/kernel.h |
| LIB_H += util/include/linux/list.h |
| LIB_H += ../include/linux/export.h |
| LIB_H += util/include/linux/poison.h |
| LIB_H += util/include/linux/rbtree.h |
| LIB_H += util/include/linux/rbtree_augmented.h |
| LIB_H += util/include/linux/string.h |
| LIB_H += ../include/linux/types.h |
| LIB_H += util/include/linux/linkage.h |
| LIB_H += util/include/asm/asm-offsets.h |
| LIB_H += ../include/asm/bug.h |
| LIB_H += util/include/asm/byteorder.h |
| LIB_H += util/include/asm/swab.h |
| LIB_H += util/include/asm/system.h |
| LIB_H += util/include/asm/uaccess.h |
| LIB_H += util/include/dwarf-regs.h |
| LIB_H += util/include/asm/dwarf2.h |
| LIB_H += util/include/asm/cpufeature.h |
| LIB_H += util/include/asm/unistd_32.h |
| LIB_H += util/include/asm/unistd_64.h |
| LIB_H += perf.h |
| LIB_H += util/annotate.h |
| LIB_H += util/cache.h |
| LIB_H += util/callchain.h |
| LIB_H += util/build-id.h |
| LIB_H += util/db-export.h |
| LIB_H += util/debug.h |
| LIB_H += util/pmu.h |
| LIB_H += util/event.h |
| LIB_H += util/evsel.h |
| LIB_H += util/evlist.h |
| LIB_H += util/exec_cmd.h |
| LIB_H += util/find-vdso-map.c |
| LIB_H += util/levenshtein.h |
| LIB_H += util/machine.h |
| LIB_H += util/map.h |
| LIB_H += util/parse-options.h |
| LIB_H += util/parse-events.h |
| LIB_H += util/quote.h |
| LIB_H += util/util.h |
| LIB_H += util/xyarray.h |
| LIB_H += util/header.h |
| LIB_H += util/help.h |
| LIB_H += util/session.h |
| LIB_H += util/ordered-events.h |
| LIB_H += util/strbuf.h |
| LIB_H += util/strlist.h |
| LIB_H += util/strfilter.h |
| LIB_H += util/svghelper.h |
| LIB_H += util/tool.h |
| LIB_H += util/run-command.h |
| LIB_H += util/sigchain.h |
| LIB_H += util/dso.h |
| LIB_H += util/symbol.h |
| LIB_H += util/color.h |
| LIB_H += util/values.h |
| LIB_H += util/sort.h |
| LIB_H += util/hist.h |
| LIB_H += util/comm.h |
| LIB_H += util/thread.h |
| LIB_H += util/thread_map.h |
| LIB_H += util/trace-event.h |
| LIB_H += util/probe-finder.h |
| LIB_H += util/dwarf-aux.h |
| LIB_H += util/probe-event.h |
| LIB_H += util/pstack.h |
| LIB_H += util/cpumap.h |
| LIB_H += util/top.h |
| LIB_H += $(ARCH_INCLUDE) |
| LIB_H += util/cgroup.h |
| LIB_H += $(LIB_INCLUDE)traceevent/event-parse.h |
| LIB_H += util/target.h |
| LIB_H += util/rblist.h |
| LIB_H += util/intlist.h |
| LIB_H += util/perf_regs.h |
| LIB_H += util/unwind.h |
| LIB_H += util/vdso.h |
| LIB_H += util/tsc.h |
| LIB_H += ui/helpline.h |
| LIB_H += ui/progress.h |
| LIB_H += ui/util.h |
| LIB_H += ui/ui.h |
| LIB_H += util/data.h |
| LIB_H += util/kvm-stat.h |
| LIB_H += util/thread-stack.h |
| |
| PERFLIBS = $(LIB_FILE) $(LIBAPIKFS) $(LIBTRACEEVENT) |
| |
| # We choose to avoid "if .. else if .. else .. endif endif" |
| # because maintaining the nesting to match is a pain. If |
| # we had "elif" things would have been much nicer... |
| |
| -include arch/$(ARCH)/Makefile |
| |
| ifneq ($(OUTPUT),) |
| CFLAGS += -I$(OUTPUT) |
| endif |
| |
| ifndef NO_GTK2 |
| ALL_PROGRAMS += $(OUTPUT)libperf-gtk.so |
| GTK_IN := $(OUTPUT)gtk-in.o |
| |
| install-gtk: $(OUTPUT)libperf-gtk.so |
| $(call QUIET_INSTALL, 'GTK UI') \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \ |
| $(INSTALL) $(OUTPUT)libperf-gtk.so '$(DESTDIR_SQ)$(libdir_SQ)' |
| endif |
| |
| ifdef ASCIIDOC8 |
| export ASCIIDOC8 |
| endif |
| |
| LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group |
| |
| export INSTALL SHELL_PATH |
| |
| ### Build rules |
| |
| SHELL = $(SHELL_PATH) |
| |
| all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS) |
| |
| please_set_SHELL_PATH_to_a_more_modern_shell: |
| @$$(:) |
| |
| shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell |
| |
| strip: $(PROGRAMS) $(OUTPUT)perf |
| $(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf |
| |
| PERF_IN := $(OUTPUT)perf-in.o |
| |
| export srctree OUTPUT RM CC LD AR CFLAGS V BISON FLEX |
| build := -f $(srctree)/tools/build/Makefile.build dir=. obj |
| |
| $(PERF_IN): $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h FORCE |
| @$(MAKE) $(build)=perf |
| |
| $(OUTPUT)perf: $(BUILTIN_OBJS) $(PERFLIBS) $(PERF_IN) |
| $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) \ |
| $(BUILTIN_OBJS) $(PERF_IN) $(LIBS) -o $@ |
| |
| $(GTK_IN): FORCE |
| @$(MAKE) $(build)=gtk |
| |
| $(OUTPUT)libperf-gtk.so: $(GTK_IN) $(PERFLIBS) |
| $(QUIET_LINK)$(CC) -o $@ -shared $(LDFLAGS) $(filter %.o,$^) $(GTK_LIBS) |
| |
| $(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt |
| |
| $(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt) |
| $(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@ |
| |
| $(SCRIPTS) : % : %.sh |
| $(QUIET_GEN)$(INSTALL) '$@.sh' '$(OUTPUT)$@' |
| |
| # These can record PERF_VERSION |
| perf.spec $(SCRIPTS) \ |
| : $(OUTPUT)PERF-VERSION-FILE |
| |
| .SUFFIXES: |
| |
| # |
| # If a target does not match any of the later rules then prefix it by $(OUTPUT) |
| # This makes targets like 'make O=/tmp/perf perf.o' work in a natural way. |
| # |
| ifneq ($(OUTPUT),) |
| %.o: $(OUTPUT)%.o |
| @echo " # Redirected target $@ => $(OUTPUT)$@" |
| util/%.o: $(OUTPUT)util/%.o |
| @echo " # Redirected target $@ => $(OUTPUT)$@" |
| bench/%.o: $(OUTPUT)bench/%.o |
| @echo " # Redirected target $@ => $(OUTPUT)$@" |
| tests/%.o: $(OUTPUT)tests/%.o |
| @echo " # Redirected target $@ => $(OUTPUT)$@" |
| endif |
| |
| # These two need to be here so that when O= is not used they take precedence |
| # over the general rule for .o |
| |
| # get relative building directory (to $(OUTPUT)) |
| # and '.' if it's $(OUTPUT) itself |
| __build-dir = $(subst $(OUTPUT),,$(dir $@)) |
| build-dir = $(if $(__build-dir),$(__build-dir),.) |
| |
| single_dep: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h |
| |
| $(OUTPUT)%.o: %.c single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)%.i: %.c single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)%.s: %.c single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)%-bison.o: %.c single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)%-flex.o: %.c single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)%.o: %.S single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)%.i: %.S single_dep FORCE |
| @$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@ |
| |
| $(OUTPUT)perf-%: %.o $(PERFLIBS) |
| $(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $(LDFLAGS) $(filter %.o,$^) $(LIBS) |
| |
| ifndef NO_PERF_READ_VDSO32 |
| $(OUTPUT)perf-read-vdso32: perf-read-vdso.c util/find-vdso-map.c |
| $(QUIET_CC)$(CC) -m32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c |
| endif |
| |
| ifndef NO_PERF_READ_VDSOX32 |
| $(OUTPUT)perf-read-vdsox32: perf-read-vdso.c util/find-vdso-map.c |
| $(QUIET_CC)$(CC) -mx32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c |
| endif |
| |
| $(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H) |
| $(patsubst perf-%,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h) |
| |
| LIBPERF_IN := $(OUTPUT)libperf-in.o |
| |
| $(LIBPERF_IN): FORCE |
| @$(MAKE) $(build)=libperf |
| |
| $(LIB_FILE): $(LIB_OBJS) $(LIBPERF_IN) |
| $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIBPERF_IN) $(LIB_OBJS) |
| |
| # libtraceevent.a |
| TE_SOURCES = $(wildcard $(TRACE_EVENT_DIR)*.[ch]) |
| |
| LIBTRACEEVENT_FLAGS = $(QUIET_SUBDIR1) O=$(OUTPUT) |
| LIBTRACEEVENT_FLAGS += CFLAGS="-g -Wall $(EXTRA_CFLAGS)" |
| LIBTRACEEVENT_FLAGS += plugin_dir=$(plugindir_SQ) |
| |
| $(LIBTRACEEVENT): $(TE_SOURCES) $(OUTPUT)PERF-CFLAGS |
| $(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) libtraceevent.a plugins |
| |
| $(LIBTRACEEVENT)-clean: |
| $(call QUIET_CLEAN, libtraceevent) |
| @$(MAKE) -C $(TRACE_EVENT_DIR) O=$(OUTPUT) clean >/dev/null |
| |
| install-traceevent-plugins: $(LIBTRACEEVENT) |
| $(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) install_plugins |
| |
| LIBAPIKFS_SOURCES = $(wildcard $(LIB_PATH)fs/*.[ch] $(LIB_PATH)fd/*.[ch]) |
| |
| # if subdir is set, we've been called from above so target has been built |
| # already |
| $(LIBAPIKFS): $(LIBAPIKFS_SOURCES) |
| ifeq ($(subdir),) |
| $(QUIET_SUBDIR0)$(LIB_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) libapikfs.a |
| endif |
| |
| $(LIBAPIKFS)-clean: |
| ifeq ($(subdir),) |
| $(call QUIET_CLEAN, libapikfs) |
| @$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) clean >/dev/null |
| endif |
| |
| help: |
| @echo 'Perf make targets:' |
| @echo ' doc - make *all* documentation (see below)' |
| @echo ' man - make manpage documentation (access with man <foo>)' |
| @echo ' html - make html documentation' |
| @echo ' info - make GNU info documentation (access with info <foo>)' |
| @echo ' pdf - make pdf documentation' |
| @echo ' TAGS - use etags to make tag information for source browsing' |
| @echo ' tags - use ctags to make tag information for source browsing' |
| @echo ' cscope - use cscope to make interactive browsing database' |
| @echo '' |
| @echo 'Perf install targets:' |
| @echo ' NOTE: documentation build requires asciidoc, xmlto packages to be installed' |
| @echo ' HINT: use "prefix" or "DESTDIR" to install to a particular' |
| @echo ' path like "make prefix=/usr/local install install-doc"' |
| @echo ' install - install compiled binaries' |
| @echo ' install-doc - install *all* documentation' |
| @echo ' install-man - install manpage documentation' |
| @echo ' install-html - install html documentation' |
| @echo ' install-info - install GNU info documentation' |
| @echo ' install-pdf - install pdf documentation' |
| @echo '' |
| @echo ' quick-install-doc - alias for quick-install-man' |
| @echo ' quick-install-man - install the documentation quickly' |
| @echo ' quick-install-html - install the html documentation quickly' |
| @echo '' |
| @echo 'Perf maintainer targets:' |
| @echo ' clean - clean all binary objects and build output' |
| |
| |
| DOC_TARGETS := doc man html info pdf |
| |
| INSTALL_DOC_TARGETS := $(patsubst %,install-%,$(DOC_TARGETS)) try-install-man |
| INSTALL_DOC_TARGETS += quick-install-doc quick-install-man quick-install-html |
| |
| # 'make doc' should call 'make -C Documentation all' |
| $(DOC_TARGETS): |
| $(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:doc=all) |
| |
| TAG_FOLDERS= . ../lib/traceevent ../lib/api ../lib/symbol |
| TAG_FILES= ../../include/uapi/linux/perf_event.h |
| |
| TAGS: |
| $(QUIET_GEN)$(RM) TAGS; \ |
| $(FIND) $(TAG_FOLDERS) -name '*.[hcS]' -print | xargs etags -a $(TAG_FILES) |
| |
| tags: |
| $(QUIET_GEN)$(RM) tags; \ |
| $(FIND) $(TAG_FOLDERS) -name '*.[hcS]' -print | xargs ctags -a $(TAG_FILES) |
| |
| cscope: |
| $(QUIET_GEN)$(RM) cscope*; \ |
| $(FIND) $(TAG_FOLDERS) -name '*.[hcS]' -print | xargs cscope -b $(TAG_FILES) |
| |
| ### Detect prefix changes |
| TRACK_CFLAGS = $(subst ','\'',$(CFLAGS)):\ |
| $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ):$(plugindir_SQ) |
| |
| $(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS |
| @FLAGS='$(TRACK_CFLAGS)'; \ |
| if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \ |
| echo 1>&2 " FLAGS: * new build flags or prefix"; \ |
| echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \ |
| fi |
| |
| ### Testing rules |
| |
| # GNU make supports exporting all variables by "export" without parameters. |
| # However, the environment gets quite big, and some programs have problems |
| # with that. |
| |
| check: $(OUTPUT)common-cmds.h |
| if sparse; \ |
| then \ |
| for i in *.c */*.c; \ |
| do \ |
| sparse $(CFLAGS) $(SPARSE_FLAGS) $$i || exit; \ |
| done; \ |
| else \ |
| exit 1; \ |
| fi |
| |
| ### Installation rules |
| |
| install-gtk: |
| |
| install-bin: all install-gtk |
| $(call QUIET_INSTALL, binaries) \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'; \ |
| $(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'; \ |
| $(LN) '$(DESTDIR_SQ)$(bindir_SQ)/perf' '$(DESTDIR_SQ)$(bindir_SQ)/trace' |
| ifndef NO_PERF_READ_VDSO32 |
| $(call QUIET_INSTALL, perf-read-vdso32) \ |
| $(INSTALL) $(OUTPUT)perf-read-vdso32 '$(DESTDIR_SQ)$(bindir_SQ)'; |
| endif |
| ifndef NO_PERF_READ_VDSOX32 |
| $(call QUIET_INSTALL, perf-read-vdsox32) \ |
| $(INSTALL) $(OUTPUT)perf-read-vdsox32 '$(DESTDIR_SQ)$(bindir_SQ)'; |
| endif |
| $(call QUIET_INSTALL, libexec) \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' |
| $(call QUIET_INSTALL, perf-archive) \ |
| $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' |
| $(call QUIET_INSTALL, perf-with-kcore) \ |
| $(INSTALL) $(OUTPUT)perf-with-kcore -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' |
| ifndef NO_LIBPERL |
| $(call QUIET_INSTALL, perl-scripts) \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'; \ |
| $(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'; \ |
| $(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'; \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'; \ |
| $(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin' |
| endif |
| ifndef NO_LIBPYTHON |
| $(call QUIET_INSTALL, python-scripts) \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'; \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'; \ |
| $(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'; \ |
| $(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'; \ |
| $(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin' |
| endif |
| $(call QUIET_INSTALL, perf_completion-script) \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d'; \ |
| $(INSTALL) perf-completion.sh '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d/perf' |
| $(call QUIET_INSTALL, tests) \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'; \ |
| $(INSTALL) tests/attr.py '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'; \ |
| $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'; \ |
| $(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr' |
| |
| install: install-bin try-install-man install-traceevent-plugins |
| |
| install-python_ext: |
| $(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)' |
| |
| # 'make install-doc' should call 'make -C Documentation install' |
| $(INSTALL_DOC_TARGETS): |
| $(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:-doc=) |
| |
| ### Cleaning rules |
| |
| # |
| # This is here, not in config/Makefile, because config/Makefile does |
| # not get included for the clean target: |
| # |
| config-clean: |
| $(call QUIET_CLEAN, config) |
| @$(MAKE) -C config/feature-checks clean >/dev/null |
| |
| clean: $(LIBTRACEEVENT)-clean $(LIBAPIKFS)-clean config-clean |
| $(call QUIET_CLEAN, core-objs) $(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf-with-kcore $(LANG_BINDINGS) |
| @find . -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete |
| @$(RM) .config-detected |
| $(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32 |
| $(call QUIET_CLEAN, core-gen) $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-FEATURES $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex* |
| $(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) clean |
| $(python-clean) |
| |
| # |
| # Trick: if ../../.git does not exist - we are building out of tree for example, |
| # then force version regeneration: |
| # |
| ifeq ($(wildcard ../../.git/HEAD),) |
| GIT-HEAD-PHONY = ../../.git/HEAD |
| else |
| GIT-HEAD-PHONY = |
| endif |
| |
| FORCE: |
| |
| .PHONY: all install clean config-clean strip install-gtk |
| .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell |
| .PHONY: $(GIT-HEAD-PHONY) TAGS tags cscope .FORCE-PERF-CFLAGS FORCE single_dep |
| |