Merge branch 'generic-string-functions'
This makes <asm/word-at-a-time.h> actually live up to its promise of
allowing architectures to help tune the string functions that do their
work a word at a time.
David had already taken the x86 strncpy_from_user() function, modified
it to work on sparc, and then done the extra work to make it generically
useful. This then expands on that work by making x86 use that generic
version, completing the circle.
But more importantly, it fixes up the word-at-a-time interfaces so that
it's now easy to also support things like strnlen_user(), and pretty
much most random string functions.
David reports that it all works fine on sparc, and Jonas Bonn reported
that an earlier version of this worked on OpenRISC too. It's pretty
easy for architectures to add support for this and just replace their
private versions with the generic code.
* generic-string-functions:
sparc: use the new generic strnlen_user() function
x86: use the new generic strnlen_user() function
lib: add generic strnlen_user() function
word-at-a-time: make the interfaces truly generic
x86: use generic strncpy_from_user routine
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 28a9af9..57aae77 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -8,9 +8,8 @@
weblink : http://www.st.com/spear
The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
- supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
- SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
- series is in progress.
+ supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+ SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
Hierarchy in SPEAr is as follows:
@@ -26,33 +25,36 @@
- SPEAr600 (SOC)
- SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- - SPEAr1300 (SOC)
+ - SPEAr1310 (SOC)
+ - SPEAr1310 Evaluation Board
+ - SPEAr1340 (SOC)
+ - SPEAr1340 Evaluation Board
Configuration
-------------
A generic configuration is provided for each machine, and can be used as the
default by
- make spear600_defconfig
- make spear300_defconfig
- make spear310_defconfig
- make spear320_defconfig
+ make spear13xx_defconfig
+ make spear3xx_defconfig
+ make spear6xx_defconfig
Layout
------
- The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
- SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+ The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+ SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
with headers in plat/.
Each machine series have a directory with name arch/arm/mach-spear followed by
series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
- Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
- spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
- specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
- mach-spear* doesn't contains board specific files as they fully support
- Flattened Device Tree.
+ Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+ spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+ mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+ files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+ spear600.c. mach-spear* doesn't contains board specific files as they fully
+ support Flattened Device Tree.
Document Author
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index bfbc771..ac9e751 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -1,6 +1,14 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
+i.MX23 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx23-evk", "fsl,imx23";
+
+i.MX28 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx28-evk", "fsl,imx28";
+
i.MX51 Babbage Board
Required root node properties:
- compatible = "fsl,imx51-babbage", "fsl,imx51";
@@ -29,6 +37,10 @@
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+i.MX6 Quad SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
Generic i.MX boards
-------------------
diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt
new file mode 100644
index 0000000..f2f2171
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt
@@ -0,0 +1,52 @@
+* Samsung Exynos Interrupt Combiner Controller
+
+Samsung's Exynos4 architecture includes a interrupt combiner controller which
+can combine interrupt sources as a group and provide a single interrupt request
+for the group. The interrupt request from each group are connected to a parent
+interrupt controller, such as GIC in case of Exynos4210.
+
+The interrupt combiner controller consists of multiple combiners. Upto eight
+interrupt sources can be connected to a combiner. The combiner outputs one
+combined interrupt for its eight interrupt sources. The combined interrupt
+is usually connected to a parent interrupt controller.
+
+A single node in the device tree is used to describe the interrupt combiner
+controller module (which includes multiple combiners). A combiner in the
+interrupt controller module shares config/control registers with other
+combiners. For example, a 32-bit interrupt enable/disable config register
+can accommodate upto 4 interrupt combiners (with each combiner supporting
+upto 8 interrupt sources).
+
+Required properties:
+- compatible: should be "samsung,exynos4210-combiner".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: should be <2>. The meaning of the cells are
+ * First Cell: Combiner Group Number.
+ * Second Cell: Interrupt number within the group.
+- reg: Base address and size of interrupt combiner registers.
+- interrupts: The list of interrupts generated by the combiners which are then
+ connected to a parent interrupt controller. The format of the interrupt
+ specifier depends in the interrupt parent controller.
+
+Optional properties:
+- samsung,combiner-nr: The number of interrupt combiners supported. If this
+ property is not specified, the default number of combiners is assumed
+ to be 16.
+- interrupt-parent: pHandle of the parent interrupt controller, if not
+ inherited from the parent node.
+
+
+Example:
+
+ The following is a an example from the Exynos4210 SoC dtsi file.
+
+ combiner:interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x10440000 0x1000>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/spear-timer.txt b/Documentation/devicetree/bindings/arm/spear-timer.txt
new file mode 100644
index 0000000..c001722
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/spear-timer.txt
@@ -0,0 +1,18 @@
+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+ "st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+ timer@f0000000 {
+ compatible = "st,spear-timer";
+ reg = <0xf0000000 0x400>;
+ interrupts = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index aa5f355..0d42949 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -2,25 +2,25 @@
---------------------------------------
Boards with the ST SPEAr600 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear600";
Boards with the ST SPEAr300 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear300";
Boards with the ST SPEAr310 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear310";
Boards with the ST SPEAr320 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear320";
+
+Boards with the ST SPEAr1310 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1310";
+
+Boards with the ST SPEAr1340 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1340";
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
new file mode 100644
index 0000000..234406d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -0,0 +1,11 @@
+NVIDIA Tegra AHB
+
+Required properties:
+- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+ ahb: ahb@6000c004 {
+ compatible = "nvidia,tegra20-ahb";
+ reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+ };
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
new file mode 100644
index 0000000..ded0398
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -0,0 +1,19 @@
+* Freescale MXS DMA
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
+- reg : Should contain registers location and length
+
+Supported chips:
+imx23, imx28.
+
+Examples:
+dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 2000>;
+};
+
+dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 2000>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
new file mode 100644
index 0000000..0c35673
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
@@ -0,0 +1,87 @@
+* Freescale MXS GPIO controller
+
+The Freescale MXS GPIO controller is part of MXS PIN controller. The
+GPIOs are organized in port/bank. Each port consists of 32 GPIOs.
+
+As the GPIO controller is embedded in the PIN controller and all the
+GPIO ports share the same IO space with PIN controller, the GPIO node
+will be represented as sub-nodes of MXS pinctrl node.
+
+Required properties for GPIO node:
+- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include
+ imx23 and imx28.
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify optional parameters (currently
+ unused).
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2. The first cell is the GPIO number.
+ The second cell bits[3:0] is used to specify trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Examples:
+
+aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+};
+
+pinctrl@80018000 {
+ compatible = "fsl,imx28-pinctrl", "simple-bus";
+ reg = <0x80018000 2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <127>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <126>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <125>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <124>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
new file mode 100644
index 0000000..1bfc02d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
@@ -0,0 +1,16 @@
+* Freescale MXS Inter IC (I2C) Controller
+
+Required properties:
+- compatible: Should be "fsl,<chip>-i2c"
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+
+Examples:
+
+i2c0: i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 2000>;
+ interrupts = <111 68>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt
new file mode 100644
index 0000000..af84cce
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mux.txt
@@ -0,0 +1,60 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner. The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An NXP pca9548 8 channel I2C multiplexer at address 0x70
+ with two NXP pca8574 GPIO expanders attached, one each to
+ ports 3 and 4.
+ */
+
+ mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ gpio1: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ gpio2: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
index 38832c7..b6cb5a1 100644
--- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
@@ -6,14 +6,18 @@
- compatible: value should be either of the following.
(a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+ (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+ inside HDMIPHY block found on several samsung SoCs
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
- - gpios: The order of the gpios should be the following: <SDA, SCL>.
- The gpio specifier depends on the gpio controller.
Optional properties:
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller. Required in all
+ cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+ lines are permanently wired to the respective client
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt
new file mode 100644
index 0000000..ceabbe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xiic.txt
@@ -0,0 +1,22 @@
+Xilinx IIC controller:
+
+Required properties:
+- compatible : Must be "xlnx,xps-iic-2.00.a"
+- reg : IIC register location and length
+- interrupts : IIC controller unterrupt
+- #address-cells = <1>
+- #size-cells = <0>
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+ axi_iic_0: i2c@40800000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupts = < 1 2 >;
+ reg = < 0x40800000 0x10000 >;
+
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index 64bcb8b..0d93b4b 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -11,9 +11,11 @@
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
- sdhci,wp-inverted : (optional) specifies that eSDHC controller
- reports inverted write-protect state;
+ reports inverted write-protect state; New devices should use
+ the generic "wp-inverted" property.
- sdhci,1-bit-only : (optional) specifies that a controller can
- only handle 1-bit data transfers.
+ only handle 1-bit data transfers. New devices should use the
+ generic "bus-width = <1>" property.
- sdhci,auto-cmd12: (optional) specifies that a controller can
only handle auto CMD12.
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index ab22fe6..c7e404b 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -9,7 +9,7 @@
- interrupts : Should contain eSDHC interrupt
Optional properties:
-- fsl,card-wired : Indicate the card is wired to host permanently
+- non-removable : Indicate the card is wired to host permanently
- fsl,cd-internal : Indicate to use controller internal card detection
- fsl,wp-internal : Indicate to use controller internal write protection
- cd-gpios : Specify GPIOs for card detection
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
index 89a0084..d64aea5a 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
@@ -10,7 +10,8 @@
Optional properties:
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
- Write-Protect GPIO.
+ Write-Protect GPIO. Note that this does not follow the
+ binding from mmc.txt, for historic reasons.
- interrupts : the interrupt of a card detect interrupt.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
new file mode 100644
index 0000000..6e70dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -0,0 +1,27 @@
+These properties are common to multiple MMC host controllers. Any host
+that requires the respective functionality should implement them using
+these definitions.
+
+Required properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>
+
+Optional properties:
+- cd-gpios : Specify GPIOs for card detection, see gpio binding
+- wp-gpios : Specify GPIOs for write protection, see gpio binding
+- cd-inverted: when present, polarity on the wp gpio line is inverted
+- wp-inverted: when present, polarity on the wp gpio line is inverted
+- non-removable: non-removable slot (like eMMC)
+- max-frequency: maximum operating clock frequency
+
+Example:
+
+sdhci@ab000000 {
+ compatible = "sdhci";
+ reg = <0xab000000 0x200>;
+ interrupts = <23>;
+ bus-width = <4>;
+ cd-gpios = <&gpio 69 0>;
+ cd-inverted;
+ wp-gpios = <&gpio 70 0>;
+ max-frequency = <50000000>;
+}
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
new file mode 100644
index 0000000..14d870a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
@@ -0,0 +1,25 @@
+* Freescale MXS MMC controller
+
+The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
+to support MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-mmc". The supported chips include
+ imx23 and imx28.
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- bus-width: Number of data lines, can be <1>, <4>, or <8>
+
+Optional properties:
+- wp-gpios: Specify GPIOs for write protection
+
+Examples:
+
+ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ reg = <0x80010000 2000>;
+ interrupts = <96 82>;
+ fsl,ssp-dma-channel = <0>;
+ bus-width = <8>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
index 7e51154..f77c303 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
@@ -7,12 +7,12 @@
- compatible : Should be "nvidia,<chip>-sdhci"
- reg : Should contain SD/MMC registers location and length
- interrupts : Should contain SD/MMC interrupt
+- bus-width : Number of data lines, can be <1>, <4>, or <8>
Optional properties:
- cd-gpios : Specify GPIOs for card detection
- wp-gpios : Specify GPIOs for write protection
- power-gpios : Specify GPIOs for power control
-- support-8bit : Boolean, indicates if 8-bit mode should be used.
Example:
@@ -23,5 +23,5 @@
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
- support-8bit;
+ bus-width = <8>;
};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index dbd4368..8a53958 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -15,7 +15,7 @@
ti,dual-volt: boolean, supports dual voltage cards
<supply-name>-supply: phandle to the regulator device tree node
"supply-name" examples are "vmmc", "vmmc_aux" etc
-ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+bus-width: Number of data lines, default assumed is 1 if the property is missing.
cd-gpios: GPIOs for card detection
wp-gpios: GPIOs for write protection
ti,non-removable: non-removable slot (like eMMC)
@@ -27,7 +27,7 @@
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";
ti,dual-volt;
- ti,bus-width = <4>;
+ bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
};
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index de43951..7ab9e1a 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -14,7 +14,7 @@
Example:
-fec@83fec000 {
+ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
index 3664d37..b4480d5 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -4,6 +4,8 @@
- compatible : "st,spear300-pinmux"
: "st,spear310-pinmux"
: "st,spear320-pinmux"
+ : "st,spear1310-pinmux"
+ : "st,spear1340-pinmux"
- reg : Address range of the pinctrl registers
- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
- Its values for SPEAr300:
@@ -89,6 +91,37 @@
"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
+For SPEAr1310 machines:
+ "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+ "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+ "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+ "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+ "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+ "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+ "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+ "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+ "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+ "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+ "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+ "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+ "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+ "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+ "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+ "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+ "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+ "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+ "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+ "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+ "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+ "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+ "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+ "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+ "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+ "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+ "miphy_dbg_grp", "pcie_grp", "sata_grp"
+
Valid values for function names are:
For All SPEAr3xx machines:
"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
@@ -106,3 +139,17 @@
"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
"mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+ "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+ "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+ "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+ "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+ "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+ "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+ "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+ "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+ "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
index a9c0406..b462d0c 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -11,7 +11,7 @@
Example:
-uart@73fbc000 {
+serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt
index 007005d..e9b005d 100644
--- a/Documentation/devicetree/bindings/usb/tegra-usb.txt
+++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt
@@ -12,6 +12,9 @@
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
+Required properties for phy_type == ulpi:
+ - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+
Optional properties:
- dr_mode : dual role mode. Indicates the working mode for
nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",
diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio
similarity index 85%
rename from Documentation/i2c/muxes/gpio-i2cmux
rename to Documentation/i2c/muxes/i2c-mux-gpio
index 811cd78..bd9b229 100644
--- a/Documentation/i2c/muxes/gpio-i2cmux
+++ b/Documentation/i2c/muxes/i2c-mux-gpio
@@ -1,11 +1,11 @@
-Kernel driver gpio-i2cmux
+Kernel driver i2c-gpio-mux
Author: Peter Korsgaard <peter.korsgaard@barco.com>
Description
-----------
-gpio-i2cmux is an i2c mux driver providing access to I2C bus segments
+i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments
from a master I2C bus and a hardware MUX controlled through GPIO pins.
E.G.:
@@ -26,16 +26,16 @@
Usage
-----
-gpio-i2cmux uses the platform bus, so you need to provide a struct
+i2c-gpio-mux uses the platform bus, so you need to provide a struct
platform_device with the platform_data pointing to a struct
gpio_i2cmux_platform_data with the I2C adapter number of the master
bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/gpio-i2cmux.h for details.
+to control it. See include/linux/i2c-gpio-mux.h for details.
E.G. something like this for a MUX providing 4 bus segments
controlled through 3 GPIO pins:
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-gpio-mux.h>
#include <linux/platform_device.h>
static const unsigned myboard_gpiomux_gpios[] = {
@@ -57,7 +57,7 @@
};
static struct platform_device myboard_i2cmux = {
- .name = "gpio-i2cmux",
+ .name = "i2c-gpio-mux",
.id = 0,
.dev = {
.platform_data = &myboard_i2cmux_data,
diff --git a/MAINTAINERS b/MAINTAINERS
index 150a29f..6f90c64 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1905,6 +1905,16 @@
F: fs/coda/
F: include/linux/coda*.h
+COMMON CLK FRAMEWORK
+M: Mike Turquette <mturquette@ti.com>
+M: Mike Turquette <mturquette@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
+T: git git://git.linaro.org/people/mturquette/linux.git
+S: Maintained
+F: drivers/clk/clk.c
+F: drivers/clk/clk-*
+F: include/linux/clk-pr*
+
COMMON INTERNET FILE SYSTEM (CIFS)
M: Steve French <sfrench@samba.org>
L: linux-cifs@vger.kernel.org
@@ -2978,9 +2988,9 @@
M: Peter Korsgaard <peter.korsgaard@barco.com>
L: linux-i2c@vger.kernel.org
S: Supported
-F: drivers/i2c/muxes/gpio-i2cmux.c
-F: include/linux/gpio-i2cmux.h
-F: Documentation/i2c/muxes/gpio-i2cmux
+F: drivers/i2c/muxes/i2c-mux-gpio.c
+F: include/linux/i2c-mux-gpio.h
+F: Documentation/i2c/muxes/i2c-mux-gpio
GENERIC HDLC (WAN) DRIVERS
M: Krzysztof Halasa <khc@pm.waw.pl>
@@ -5138,7 +5148,7 @@
M: Guenter Roeck <guenter.roeck@ericsson.com>
L: linux-i2c@vger.kernel.org
S: Maintained
-F: drivers/i2c/muxes/pca9541.c
+F: drivers/i2c/muxes/i2c-mux-pca9541.c
PCA9564/PCA9665 I2C BUS DRIVER
M: Wolfram Sang <w.sang@pengutronix.de>
@@ -6340,14 +6350,25 @@
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
+M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/
+SPEAR13XX MACHINE SUPPORT
+M: Viresh Kumar <viresh.kumar@st.com>
+M: Shiraz Hashim <shiraz.hashim@st.com>
+L: spear-devel@list.st.com
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.st.com/spear
+S: Maintained
+F: arch/arm/mach-spear13xx/
+
SPEAR3XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
+M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@@ -6356,6 +6377,8 @@
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
+M: Shiraz Hashim <shiraz.hashim@st.com>
+M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@@ -6368,9 +6391,7 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
-F: arch/arm/mach-spear*/clock.c
-F: arch/arm/plat-spear/clock.c
-F: arch/arm/plat-spear/include/plat/clock.h
+F: drivers/clk/spear/
SPI SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3ca1ba9..5e76013 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -456,8 +456,10 @@
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select COMMON_CLK
select HAVE_CLK_PREPARE
select PINCTRL
+ select USE_OF
help
Support for Freescale MXS-based family of processors
@@ -947,6 +949,7 @@
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select COMMON_CLK
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
@@ -1051,7 +1054,6 @@
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
@@ -1102,6 +1104,7 @@
bool
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select COMMON_CLK
config PLAT_PXA
bool
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 85348a0..01a1341 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -103,6 +103,35 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DAVINCI_DA8XX_UART1
+ bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
+ depends on ARCH_DAVINCI_DA8XX
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 serial port on DaVinci DA8XX devices.
+
+ config DEBUG_DAVINCI_DA8XX_UART2
+ bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
+ depends on ARCH_DAVINCI_DA8XX
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART2 serial port on DaVinci DA8XX devices.
+
+ config DEBUG_DAVINCI_DMx_UART0
+ bool "Kernel low-level debugging on DaVinci DMx using UART0"
+ depends on ARCH_DAVINCI_DMx
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 serial port on DaVinci DMx devices.
+
+ config DEBUG_DAVINCI_TNETV107X_UART1
+ bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
+ depends on ARCH_DAVINCI_TNETV107X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 serial port on DaVinci TNETV107X
+ devices.
+
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
@@ -180,6 +209,14 @@
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
+ config DEBUG_IMX6Q_UART2
+ bool "i.MX6Q Debug UART2"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q UART2. This is correct for e.g. the SabreLite
+ board.
+
config DEBUG_IMX6Q_UART4
bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 157900d..0298b00 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,9 +160,7 @@
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_OMAP1) := omap1
-machine-$(CONFIG_ARCH_OMAP2) := omap2
-machine-$(CONFIG_ARCH_OMAP3) := omap2
-machine-$(CONFIG_ARCH_OMAP4) := omap2
+machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
@@ -188,6 +186,8 @@
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
+machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
+machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx
@@ -205,7 +205,7 @@
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P) := s5p samsung
+plat-$(CONFIG_PLAT_S5P) := samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 399d17b..49945cc 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -23,4 +23,52 @@
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
};
+
+ i2c@12C60000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ gpios = <&gpb3 0 2 3 0>,
+ <&gpb3 1 2 3 0>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@12C70000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ gpios = <&gpb3 2 2 3 0>,
+ <&gpb3 3 2 3 0>;
+
+ eeprom@51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@12C80000 {
+ status = "disabled";
+ };
+
+ i2c@12C90000 {
+ status = "disabled";
+ };
+
+ i2c@12CA0000 {
+ status = "disabled";
+ };
+
+ i2c@12CB0000 {
+ status = "disabled";
+ };
+
+ i2c@12CC0000 {
+ status = "disabled";
+ };
+
+ i2c@12CD0000 {
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dfc4335..5ca0cdb 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -23,11 +23,11 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
- gic:interrupt-controller@10490000 {
+ gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
};
watchdog {
@@ -42,30 +42,6 @@
interrupts = <0 43 0>, <0 44 0>;
};
- sdhci@12200000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12200000 0x100>;
- interrupts = <0 75 0>;
- };
-
- sdhci@12210000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12210000 0x100>;
- interrupts = <0 76 0>;
- };
-
- sdhci@12220000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12220000 0x100>;
- interrupts = <0 77 0>;
- };
-
- sdhci@12230000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12230000 0x100>;
- interrupts = <0 78 0>;
- };
-
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
@@ -94,48 +70,64 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
interrupts = <0 56 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
interrupts = <0 57 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
interrupts = <0 58 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
interrupts = <0 59 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
interrupts = <0 60 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
interrupts = <0 61 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
interrupts = <0 62 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
interrupts = <0 63 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
amba {
@@ -157,13 +149,13 @@
interrupts = <0 35 0>;
};
- mdma0: pdma@10800000 {
+ mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
};
- mdma1: pdma@11C10000 {
+ mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
@@ -242,6 +234,12 @@
#gpio-cells = <4>;
};
+ gpc4: gpio-controller@114002E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114002E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
gpd0: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
@@ -388,19 +386,19 @@
gpv2: gpio-controller@10D10040 {
compatible = "samsung,exynos4-gpio";
- reg = <0x10D10040 0x20>;
+ reg = <0x10D10060 0x20>;
#gpio-cells = <4>;
};
gpv3: gpio-controller@10D10060 {
compatible = "samsung,exynos4-gpio";
- reg = <0x10D10060 0x20>;
+ reg = <0x10D10080 0x20>;
#gpio-cells = <4>;
};
gpv4: gpio-controller@10D10080 {
compatible = "samsung,exynos4-gpio";
- reg = <0x10D10080 0x20>;
+ reg = <0x10D100C0 0x20>;
#gpio-cells = <4>;
};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
new file mode 100644
index 0000000..70bffa9
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+ model = "Freescale i.MX23 Evaluation Kit";
+ compatible = "fsl,imx23-evk", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <8>;
+ wp-gpios = <&gpio1 30 0>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
new file mode 100644
index 0000000..8c5f999
--- /dev/null
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ apb@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000>;
+ ranges;
+
+ icoll: interrupt-controller@80000000 {
+ compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ dma-apbh@80004000 {
+ compatible = "fsl,imx23-dma-apbh";
+ reg = <0x80004000 2000>;
+ };
+
+ ecc@80008000 {
+ reg = <0x80008000 2000>;
+ status = "disabled";
+ };
+
+ bch@8000a000 {
+ reg = <0x8000a000 2000>;
+ status = "disabled";
+ };
+
+ gpmi@8000c000 {
+ reg = <0x8000c000 2000>;
+ status = "disabled";
+ };
+
+ ssp0: ssp@80010000 {
+ reg = <0x80010000 2000>;
+ interrupts = <15 14>;
+ fsl,ssp-dma-channel = <1>;
+ status = "disabled";
+ };
+
+ etm@80014000 {
+ reg = <0x80014000 2000>;
+ status = "disabled";
+ };
+
+ pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx23-pinctrl", "simple-bus";
+ reg = <0x80018000 2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ interrupts = <16>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ interrupts = <17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ interrupts = <18>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ duart_pins_a: duart@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x11a2 0x11b2>;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ mmc0_8bit_pins_a: mmc0-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x2020 0x2030 0x2040
+ 0x2050 0x0082 0x0092 0x00a2
+ 0x00b2 0x2000 0x2010 0x2060>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_pins_fixup: mmc0-pins-fixup {
+ fsl,pinmux-ids = <0x2010 0x2060>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ digctl@8001c000 {
+ reg = <0x8001c000 2000>;
+ status = "disabled";
+ };
+
+ emi@80020000 {
+ reg = <0x80020000 2000>;
+ status = "disabled";
+ };
+
+ dma-apbx@80024000 {
+ compatible = "fsl,imx23-dma-apbx";
+ reg = <0x80024000 2000>;
+ };
+
+ dcp@80028000 {
+ reg = <0x80028000 2000>;
+ status = "disabled";
+ };
+
+ pxp@8002a000 {
+ reg = <0x8002a000 2000>;
+ status = "disabled";
+ };
+
+ ocotp@8002c000 {
+ reg = <0x8002c000 2000>;
+ status = "disabled";
+ };
+
+ axi-ahb@8002e000 {
+ reg = <0x8002e000 2000>;
+ status = "disabled";
+ };
+
+ lcdif@80030000 {
+ reg = <0x80030000 2000>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@80034000 {
+ reg = <0x80034000 2000>;
+ interrupts = <2 20>;
+ fsl,ssp-dma-channel = <2>;
+ status = "disabled";
+ };
+
+ tvenc@80038000 {
+ reg = <0x80038000 2000>;
+ status = "disabled";
+ };
+ };
+
+ apbx@80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clkctl@80040000 {
+ reg = <0x80040000 2000>;
+ status = "disabled";
+ };
+
+ saif0: saif@80042000 {
+ reg = <0x80042000 2000>;
+ status = "disabled";
+ };
+
+ power@80044000 {
+ reg = <0x80044000 2000>;
+ status = "disabled";
+ };
+
+ saif1: saif@80046000 {
+ reg = <0x80046000 2000>;
+ status = "disabled";
+ };
+
+ audio-out@80048000 {
+ reg = <0x80048000 2000>;
+ status = "disabled";
+ };
+
+ audio-in@8004c000 {
+ reg = <0x8004c000 2000>;
+ status = "disabled";
+ };
+
+ lradc@80050000 {
+ reg = <0x80050000 2000>;
+ status = "disabled";
+ };
+
+ spdif@80054000 {
+ reg = <0x80054000 2000>;
+ status = "disabled";
+ };
+
+ i2c@80058000 {
+ reg = <0x80058000 2000>;
+ status = "disabled";
+ };
+
+ rtc@8005c000 {
+ reg = <0x8005c000 2000>;
+ status = "disabled";
+ };
+
+ pwm@80064000 {
+ reg = <0x80064000 2000>;
+ status = "disabled";
+ };
+
+ timrot@80068000 {
+ reg = <0x80068000 2000>;
+ status = "disabled";
+ };
+
+ auart0: serial@8006c000 {
+ reg = <0x8006c000 0x2000>;
+ status = "disabled";
+ };
+
+ auart1: serial@8006e000 {
+ reg = <0x8006e000 0x2000>;
+ status = "disabled";
+ };
+
+ duart: serial@80070000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80070000 0x2000>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ usbphy@8007c000 {
+ reg = <0x8007c000 0x2000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usbctrl@80080000 {
+ reg = <0x80080000 0x10000>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index a51a08f..2b0ff60 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -27,22 +27,22 @@
status = "okay";
};
- uart@1000a000 {
+ serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart@1000b000 {
+ serial@1000b000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart@1000c000 {
+ serial@1000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
- fec@1002b000 {
+ ethernet@1002b000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc5e7d5..2b1a166 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -59,28 +59,28 @@
status = "disabled";
};
- uart1: uart@1000a000 {
+ uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
status = "disabled";
};
- uart2: uart@1000b000 {
+ uart2: serial@1000b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
status = "disabled";
};
- uart3: uart@1000c000 {
+ uart3: serial@1000c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
status = "disabled";
};
- uart4: uart@1000d000 {
+ uart4: serial@1000d000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
@@ -183,14 +183,14 @@
status = "disabled";
};
- uart5: uart@1001b000 {
+ uart5: serial@1001b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
status = "disabled";
};
- uart6: uart@1001c000 {
+ uart6: serial@1001c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
@@ -206,7 +206,7 @@
status = "disabled";
};
- fec: fec@1002b000 {
+ fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
new file mode 100644
index 0000000..ee520a5
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Freescale i.MX28 Evaluation Kit";
+ compatible = "fsl,imx28-evk", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ wp-gpios = <&gpio2 12 0>;
+ status = "okay";
+ };
+
+ ssp1: ssp@80012000 {
+ compatible = "fsl,imx28-mmc";
+ bus-width = <8>;
+ wp-gpios = <&gpio0 28 0>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ saif0: saif@80042000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif0_pins_a>;
+ status = "okay";
+ };
+
+ saif1: saif@80046000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+
+ };
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ status = "okay";
+ };
+
+ mac1: ethernet@800f4000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac1_pins_a>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx28-evk-sgtl5000",
+ "fsl,mxs-audio-sgtl5000";
+ model = "imx28-evk-sgtl5000";
+ saif-controllers = <&saif0 &saif1>;
+ audio-codec = <&sgtl5000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
new file mode 100644
index 0000000..4634cb8
--- /dev/null
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -0,0 +1,497 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ saif0 = &saif0;
+ saif1 = &saif1;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ apb@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3c900>;
+ ranges;
+
+ icoll: interrupt-controller@80000000 {
+ compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ hsadc@80002000 {
+ reg = <0x80002000 2000>;
+ interrupts = <13 87>;
+ status = "disabled";
+ };
+
+ dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 2000>;
+ };
+
+ perfmon@80006000 {
+ reg = <0x80006000 800>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ bch@8000a000 {
+ reg = <0x8000a000 2000>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ gpmi@8000c000 {
+ reg = <0x8000c000 2000>;
+ interrupts = <42 88>;
+ status = "disabled";
+ };
+
+ ssp0: ssp@80010000 {
+ reg = <0x80010000 2000>;
+ interrupts = <96 82>;
+ fsl,ssp-dma-channel = <0>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@80012000 {
+ reg = <0x80012000 2000>;
+ interrupts = <97 83>;
+ fsl,ssp-dma-channel = <1>;
+ status = "disabled";
+ };
+
+ ssp2: ssp@80014000 {
+ reg = <0x80014000 2000>;
+ interrupts = <98 84>;
+ fsl,ssp-dma-channel = <2>;
+ status = "disabled";
+ };
+
+ ssp3: ssp@80016000 {
+ reg = <0x80016000 2000>;
+ interrupts = <99 85>;
+ fsl,ssp-dma-channel = <3>;
+ status = "disabled";
+ };
+
+ pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-pinctrl", "simple-bus";
+ reg = <0x80018000 2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <127>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <126>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <125>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <124>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ duart_pins_a: duart@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x3102 0x3112>;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ mac0_pins_a: mac0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x4000 0x4010 0x4020
+ 0x4030 0x4040 0x4060 0x4070
+ 0x4080 0x4100>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mac1_pins_a: mac1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
+ 0x40e1 0x40b1 0x40c1>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_8bit_pins_a: mmc0-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x2000 0x2010 0x2020
+ 0x2030 0x2040 0x2050 0x2060
+ 0x2070 0x2080 0x2090 0x20a0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_cd_cfg: mmc0-cd-cfg {
+ fsl,pinmux-ids = <0x2090>;
+ fsl,pull-up = <0>;
+ };
+
+ mmc0_sck_cfg: mmc0-sck-cfg {
+ fsl,pinmux-ids = <0x20a0>;
+ fsl,drive-strength = <2>;
+ fsl,pull-up = <0>;
+ };
+
+ i2c0_pins_a: i2c0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x3180 0x3190>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ saif0_pins_a: saif0@0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x3140 0x3150 0x3160 0x3170>;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ saif1_pins_a: saif1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x31a0>;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+ };
+
+ digctl@8001c000 {
+ reg = <0x8001c000 2000>;
+ interrupts = <89>;
+ status = "disabled";
+ };
+
+ etm@80022000 {
+ reg = <0x80022000 2000>;
+ status = "disabled";
+ };
+
+ dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 2000>;
+ };
+
+ dcp@80028000 {
+ reg = <0x80028000 2000>;
+ interrupts = <52 53 54>;
+ status = "disabled";
+ };
+
+ pxp@8002a000 {
+ reg = <0x8002a000 2000>;
+ interrupts = <39>;
+ status = "disabled";
+ };
+
+ ocotp@8002c000 {
+ reg = <0x8002c000 2000>;
+ status = "disabled";
+ };
+
+ axi-ahb@8002e000 {
+ reg = <0x8002e000 2000>;
+ status = "disabled";
+ };
+
+ lcdif@80030000 {
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+ status = "disabled";
+ };
+
+ can0: can@80032000 {
+ reg = <0x80032000 2000>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
+ can1: can@80034000 {
+ reg = <0x80034000 2000>;
+ interrupts = <9>;
+ status = "disabled";
+ };
+
+ simdbg@8003c000 {
+ reg = <0x8003c000 200>;
+ status = "disabled";
+ };
+
+ simgpmisel@8003c200 {
+ reg = <0x8003c200 100>;
+ status = "disabled";
+ };
+
+ simsspsel@8003c300 {
+ reg = <0x8003c300 100>;
+ status = "disabled";
+ };
+
+ simmemsel@8003c400 {
+ reg = <0x8003c400 100>;
+ status = "disabled";
+ };
+
+ gpiomon@8003c500 {
+ reg = <0x8003c500 100>;
+ status = "disabled";
+ };
+
+ simenet@8003c700 {
+ reg = <0x8003c700 100>;
+ status = "disabled";
+ };
+
+ armjtag@8003c800 {
+ reg = <0x8003c800 100>;
+ status = "disabled";
+ };
+ };
+
+ apbx@80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clkctl@80040000 {
+ reg = <0x80040000 2000>;
+ status = "disabled";
+ };
+
+ saif0: saif@80042000 {
+ compatible = "fsl,imx28-saif";
+ reg = <0x80042000 2000>;
+ interrupts = <59 80>;
+ fsl,saif-dma-channel = <4>;
+ status = "disabled";
+ };
+
+ power@80044000 {
+ reg = <0x80044000 2000>;
+ status = "disabled";
+ };
+
+ saif1: saif@80046000 {
+ compatible = "fsl,imx28-saif";
+ reg = <0x80046000 2000>;
+ interrupts = <58 81>;
+ fsl,saif-dma-channel = <5>;
+ status = "disabled";
+ };
+
+ lradc@80050000 {
+ reg = <0x80050000 2000>;
+ status = "disabled";
+ };
+
+ spdif@80054000 {
+ reg = <0x80054000 2000>;
+ interrupts = <45 66>;
+ status = "disabled";
+ };
+
+ rtc@80056000 {
+ reg = <0x80056000 2000>;
+ interrupts = <28 29>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 2000>;
+ interrupts = <111 68>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@8005a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x8005a000 2000>;
+ interrupts = <110 69>;
+ status = "disabled";
+ };
+
+ pwm@80064000 {
+ reg = <0x80064000 2000>;
+ status = "disabled";
+ };
+
+ timrot@80068000 {
+ reg = <0x80068000 2000>;
+ status = "disabled";
+ };
+
+ auart0: serial@8006a000 {
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ status = "disabled";
+ };
+
+ auart1: serial@8006c000 {
+ reg = <0x8006c000 0x2000>;
+ interrupts = <113 72 73>;
+ status = "disabled";
+ };
+
+ auart2: serial@8006e000 {
+ reg = <0x8006e000 0x2000>;
+ interrupts = <114 74 75>;
+ status = "disabled";
+ };
+
+ auart3: serial@80070000 {
+ reg = <0x80070000 0x2000>;
+ interrupts = <115 76 77>;
+ status = "disabled";
+ };
+
+ auart4: serial@80072000 {
+ reg = <0x80072000 0x2000>;
+ interrupts = <116 78 79>;
+ status = "disabled";
+ };
+
+ duart: serial@80074000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80074000 0x1000>;
+ interrupts = <47>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ reg = <0x8007c000 0x2000>;
+ status = "disabled";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ reg = <0x8007e000 0x2000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usbctrl0: usbctrl@80080000 {
+ reg = <0x80080000 0x10000>;
+ status = "disabled";
+ };
+
+ usbctrl1: usbctrl@80090000 {
+ reg = <0x80090000 0x10000>;
+ status = "disabled";
+ };
+
+ dflpt@800c0000 {
+ reg = <0x800c0000 0x10000>;
+ status = "disabled";
+ };
+
+ mac0: ethernet@800f0000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f0000 0x4000>;
+ interrupts = <101>;
+ status = "disabled";
+ };
+
+ mac1: ethernet@800f4000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f4000 0x4000>;
+ interrupts = <102>;
+ status = "disabled";
+ };
+
+ switch@800f8000 {
+ reg = <0x800f8000 0x8000>;
+ status = "disabled";
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 9949e60..de065b5 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x90000000 0x20000000>;
};
@@ -40,7 +36,7 @@
status = "okay";
};
- uart3: uart@7000c000 {
+ uart3: serial@7000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
@@ -166,6 +162,11 @@
};
};
};
+
+ ssi2: ssi@70014000 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+ };
};
wdog@73f98000 { /* WDOG1 */
@@ -177,12 +178,12 @@
reg = <0x73fa8000 0x4000>;
};
- uart1: uart@73fbc000 {
+ uart1: serial@73fbc000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart2: uart@73fc0000 {
+ uart2: serial@73fc0000 {
status = "okay";
};
};
@@ -195,13 +196,20 @@
i2c@83fc4000 { /* I2C2 */
status = "okay";
- codec: sgtl5000@0a {
+ sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ clock-frequency = <26000000>;
+ VDDA-supply = <&vdig_reg>;
+ VDDIO-supply = <&vvideo_reg>;
};
};
- fec@83fec000 {
+ audmux@83fd0000 {
+ status = "okay";
+ };
+
+ ethernet@83fec000 {
phy-mode = "mii";
status = "okay";
};
@@ -218,4 +226,18 @@
gpio-key,wakeup;
};
};
+
+ sound {
+ compatible = "fsl,imx51-babbage-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx51-babbage-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ };
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 6663986..bfa65ab 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -86,7 +86,7 @@
status = "disabled";
};
- uart3: uart@7000c000 {
+ uart3: serial@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
@@ -102,6 +102,15 @@
status = "disabled";
};
+ ssi2: ssi@70014000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x70014000 0x4000>;
+ interrupts = <30>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
esdhc@70020000 { /* ESDHC3 */
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
@@ -171,14 +180,14 @@
status = "disabled";
};
- uart1: uart@73fbc000 {
+ uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
- uart2: uart@73fc0000 {
+ uart2: serial@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
@@ -235,7 +244,31 @@
status = "disabled";
};
- fec@83fec000 {
+ ssi1: ssi@83fcc000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x83fcc000 0x4000>;
+ interrupts = <29>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux@83fd0000 {
+ compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+ reg = <0x83fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@83fe8000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x83fe8000 0x4000>;
+ interrupts = <96>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 2dccce4..5b8eafc 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Automotive Reference Design Board";
compatible = "fsl,imx53-ard", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x40000000>;
};
@@ -44,7 +40,7 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 5bac4aa..9c79803 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Evaluation Kit";
compatible = "fsl,imx53-evk", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x80000000>;
};
@@ -75,7 +71,7 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
};
@@ -99,7 +95,7 @@
};
};
- fec@63fec000 {
+ ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 5c57c86..2d803a9 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Quick Start Board";
compatible = "fsl,imx53-qsb", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x40000000>;
};
@@ -33,6 +29,11 @@
status = "okay";
};
+ ssi2: ssi@50014000 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+ };
+
esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
@@ -49,7 +50,7 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
};
@@ -62,9 +63,11 @@
i2c@63fc4000 { /* I2C2 */
status = "okay";
- codec: sgtl5000@0a {
+ sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
};
};
@@ -77,12 +80,88 @@
};
pmic: dialog@48 {
- compatible = "dialog,da9053", "dialog,da9052";
+ compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
+
+ regulators {
+ buck0 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ buck2 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ buck3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ ldo4 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo12 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ ldo13 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
};
};
- fec@63fec000 {
+ audmux@63fd0000 {
+ status = "okay";
+ };
+
+ ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
@@ -122,4 +201,30 @@
linux,default-trigger = "heartbeat";
};
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p2v: 3p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx53-qsb-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-qsb-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index c7ee86c..0809102 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Smart Mobile Reference Design Board";
compatible = "fsl,imx53-smd", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x40000000>;
};
@@ -35,11 +31,11 @@
};
esdhc@50008000 { /* ESDHC2 */
- fsl,card-wired;
+ non-removable;
status = "okay";
};
- uart3: uart@5000c000 {
+ uart3: serial@5000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
@@ -76,7 +72,7 @@
};
esdhc@50020000 { /* ESDHC3 */
- fsl,card-wired;
+ non-removable;
status = "okay";
};
};
@@ -90,11 +86,11 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
- uart2: uart@53fc0000 {
+ uart2: serial@53fc0000 {
status = "okay";
};
};
@@ -142,7 +138,7 @@
};
};
- fec@63fec000 {
+ ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 5dd91b9..e3e8694 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,7 +88,7 @@
status = "disabled";
};
- uart3: uart@5000c000 {
+ uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
@@ -104,6 +104,15 @@
status = "disabled";
};
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
esdhc@50020000 { /* ESDHC3 */
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
@@ -173,14 +182,14 @@
status = "disabled";
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
- uart2: uart@53fc0000 {
+ uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
@@ -226,7 +235,7 @@
status = "disabled";
};
- uart4: uart@53ff0000 {
+ uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
@@ -241,7 +250,7 @@
reg = <0x60000000 0x10000000>;
ranges;
- uart5: uart@63f90000 {
+ uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
@@ -290,7 +299,31 @@
status = "disabled";
};
- fec@63fec000 {
+ ssi1: ssi@63fcc000 {
+ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux@63fd0000 {
+ compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@63fe8000 {
+ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ reg = <0x63fe8000 0x4000>;
+ interrupts = <96>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index ce1c823..db4c609 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -17,19 +17,14 @@
model = "Freescale i.MX6 Quad Armadillo2 Board";
compatible = "fsl,imx6q-arm2", "fsl,imx6q";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
- };
-
memory {
reg = <0x10000000 0x80000000>;
};
soc {
aips-bus@02100000 { /* AIPS2 */
- enet@02188000 {
+ ethernet@02188000 {
phy-mode = "rgmii";
- local-mac-address = [00 04 9F 01 1B 61];
status = "okay";
};
@@ -37,16 +32,20 @@
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <®_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
- fsl,card-wired;
+ non-removable;
vmmc-supply = <®_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
status = "okay";
};
- uart4: uart@021f0000 {
+ uart4: serial@021f0000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4663a4e..e0ec929 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -22,8 +22,30 @@
};
soc {
+ aips-bus@02000000 { /* AIPS1 */
+ spba-bus@02000000 {
+ ecspi@02008000 { /* eCSPI1 */
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+ };
+
+ ssi1: ssi@02028000 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+ };
+ };
+
+ };
+
aips-bus@02100000 { /* AIPS2 */
- enet@02188000 {
+ ethernet@02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
@@ -43,13 +65,23 @@
status = "okay";
};
- uart2: uart@021e8000 {
+ audmux@021d8000 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ };
+
+ uart2: serial@021e8000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2_1>;
};
i2c@021a0000 { /* I2C1 */
status = "okay";
clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
@@ -80,4 +112,18 @@
regulator-always-on;
};
};
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
new file mode 100644
index 0000000..07509a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6Q SABRE Smart Device Board";
+ compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+
+ aips-bus@02000000 { /* AIPS1 */
+ spba-bus@02000000 {
+ uart1: serial@02020000 {
+ status = "okay";
+ };
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ ethernet@02188000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usdhc@02194000 { /* uSDHC2 */
+ cd-gpios = <&gpio2 2 0>;
+ wp-gpios = <&gpio2 3 0>;
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio2 0 0>;
+ wp-gpios = <&gpio2 1 0>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 4905f51..8c90cba 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -165,7 +165,7 @@
status = "disabled";
};
- uart1: uart@02020000 {
+ uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
@@ -177,19 +177,31 @@
interrupts = <0 51 0x04>;
};
- ssi@02028000 { /* SSI1 */
+ ssi1: ssi@02028000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <38 37>;
+ status = "disabled";
};
- ssi@0202c000 { /* SSI2 */
+ ssi2: ssi@0202c000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <42 41>;
+ status = "disabled";
};
- ssi@02030000 { /* SSI3 */
+ ssi3: ssi@02030000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <46 45>;
+ status = "disabled";
};
asrc@02034000 {
@@ -346,6 +358,90 @@
compatible = "fsl,imx6q-anatop";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+ regulator-1p1@110 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5@130 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2000000>;
+ anatop-max-voltage = <2750000>;
+ };
+
+ regulator-vddcore@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ regulator-vddpu@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ regulator-vddsoc@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
};
usbphy@020c9000 { /* USBPHY1 */
@@ -386,7 +482,62 @@
};
iomuxc@020e0000 {
+ compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+
+ /* shared pinctrl settings */
+ audmux {
+ pinctrl_audmux_1: audmux-1 {
+ fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+ 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+ 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+ 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+ 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+ };
+ };
+
+ serial2 {
+ pinctrl_serial2_1: serial2grp-1 {
+ fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
+ 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+ 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+ 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+ 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+ };
+ };
+
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+ 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ };
+ };
};
dcic@020e4000 { /* DCIC1 */
@@ -422,7 +573,7 @@
reg = <0x0217c000 0x4000>;
};
- enet@02188000 {
+ ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
@@ -527,7 +678,9 @@
};
audmux@021d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
+ status = "disabled";
};
mipi@021dc000 { /* MIPI-CSI */
@@ -543,28 +696,28 @@
interrupts = <0 18 0x04>;
};
- uart2: uart@021e8000 {
+ uart2: serial@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
status = "disabled";
};
- uart3: uart@021ec000 {
+ uart3: serial@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
status = "disabled";
};
- uart4: uart@021f0000 {
+ uart4: serial@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
status = "disabled";
};
- uart5: uart@021f4000 {
+ uart5: serial@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 8c756be..5b4506c 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -57,7 +57,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- ti,bus-width = <8>;
+ bus-width = <8>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index e671361..1efe0c5 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -70,7 +70,7 @@
&mmc1 {
vmmc-supply = <&vmmc>;
- ti,bus-width = <8>;
+ bus-width = <8>;
};
&mmc2 {
@@ -87,5 +87,5 @@
&mmc5 {
ti,non-removable;
- ti,bus-width = <4>;
+ bus-width = <4>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index e5eeb6f..d08c4d1 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -137,12 +137,12 @@
&mmc1 {
vmmc-supply = <&vmmc>;
- ti,bus-width = <8>;
+ bus-width = <8>;
};
&mmc2 {
vmmc-supply = <&vaux1>;
- ti,bus-width = <8>;
+ bus-width = <8>;
ti,non-removable;
};
@@ -155,6 +155,6 @@
};
&mmc5 {
- ti,bus-width = <4>;
+ bus-width = <4>;
ti,non-removable;
};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 0000000..8314e41
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,292 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+ model = "ST SPEAr1310 Evaluation Board";
+ compatible = "st,spear1310-evb", "st,spear1310";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ pinmux@e0700000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ i2c0-pmx {
+ st,pins = "i2c0_grp";
+ st,function = "i2c0";
+ };
+ i2s1 {
+ st,pins = "i2s1_grp";
+ st,function = "i2s1";
+ };
+ gpio {
+ st,pins = "arm_gpio_grp";
+ st,function = "arm_gpio";
+ };
+ eth {
+ st,pins = "gmii_grp";
+ st,function = "gmii";
+ };
+ ssp0 {
+ st,pins = "ssp0_grp";
+ st,function = "ssp0";
+ };
+ kbd {
+ st,pins = "keyboard_6x6_grp";
+ st,function = "keyboard";
+ };
+ sdhci {
+ st,pins = "sdhci_grp";
+ st,function = "sdhci";
+ };
+ smi-pmx {
+ st,pins = "smi_2_chips_grp";
+ st,function = "smi";
+ };
+ uart0 {
+ st,pins = "uart0_grp";
+ st,function = "uart0";
+ };
+ rs485 {
+ st,pins = "rs485_0_1_tdm_0_1_grp";
+ st,function = "rs485_0_1_tdm_0_1";
+ };
+ i2c1_2 {
+ st,pins = "i2c_1_2_grp";
+ st,function = "i2c_1_2";
+ };
+ pci {
+ st,pins = "pcie0_grp","pcie1_grp",
+ "pcie2_grp";
+ st,function = "pci";
+ };
+ smii {
+ st,pins = "smii_0_1_2_grp";
+ st,function = "smii_0_1_2";
+ };
+ nand {
+ st,pins = "nand_8bit_grp",
+ "nand_16bit_grp";
+ st,function = "nand";
+ };
+ };
+ };
+
+ ahci@b1000000 {
+ status = "okay";
+ };
+
+ cf@b2800000 {
+ status = "okay";
+ };
+
+ dma@ea800000 {
+ status = "okay";
+ };
+
+ dma@eb000000 {
+ status = "okay";
+ };
+
+ fsmc: flash@b0000000 {
+ status = "okay";
+ };
+
+ gmac0: eth@e2000000 {
+ status = "okay";
+ };
+
+ sdhci@b3000000 {
+ status = "okay";
+ };
+
+ smi: flash@ea000000 {
+ status = "okay";
+ clock-rate=<50000000>;
+
+ flash@e6000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe6000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
+ };
+
+ spi0: spi@e0100000 {
+ status = "okay";
+ };
+
+ ehci@e4800000 {
+ status = "okay";
+ };
+
+ ehci@e5800000 {
+ status = "okay";
+ };
+
+ ohci@e4000000 {
+ status = "okay";
+ };
+
+ ohci@e5000000 {
+ status = "okay";
+ };
+
+ apb {
+ adc@e0080000 {
+ status = "okay";
+ };
+
+ gpio0: gpio@e0600000 {
+ status = "okay";
+ };
+
+ gpio1: gpio@e0680000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@e0280000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@5cd00000 {
+ status = "okay";
+ };
+
+ kbd@e0300000 {
+ linux,keymap = < 0x00000001
+ 0x00010002
+ 0x00020003
+ 0x00030004
+ 0x00040005
+ 0x00050006
+ 0x00060007
+ 0x00070008
+ 0x00080009
+ 0x0100000a
+ 0x0101000c
+ 0x0102000d
+ 0x0103000e
+ 0x0104000f
+ 0x01050010
+ 0x01060011
+ 0x01070012
+ 0x01080013
+ 0x02000014
+ 0x02010015
+ 0x02020016
+ 0x02030017
+ 0x02040018
+ 0x02050019
+ 0x0206001a
+ 0x0207001b
+ 0x0208001c
+ 0x0300001d
+ 0x0301001e
+ 0x0302001f
+ 0x03030020
+ 0x03040021
+ 0x03050022
+ 0x03060023
+ 0x03070024
+ 0x03080025
+ 0x04000026
+ 0x04010027
+ 0x04020028
+ 0x04030029
+ 0x0404002a
+ 0x0405002b
+ 0x0406002c
+ 0x0407002d
+ 0x0408002e
+ 0x0500002f
+ 0x05010030
+ 0x05020031
+ 0x05030032
+ 0x05040033
+ 0x05050034
+ 0x05060035
+ 0x05070036
+ 0x05080037
+ 0x06000038
+ 0x06010039
+ 0x0602003a
+ 0x0603003b
+ 0x0604003c
+ 0x0605003d
+ 0x0606003e
+ 0x0607003f
+ 0x06080040
+ 0x07000041
+ 0x07010042
+ 0x07020043
+ 0x07030044
+ 0x07040045
+ 0x07050046
+ 0x07060047
+ 0x07070048
+ 0x07080049
+ 0x0800004a
+ 0x0801004b
+ 0x0802004c
+ 0x0803004d
+ 0x0804004e
+ 0x0805004f
+ 0x08060050
+ 0x08070051
+ 0x08080052 >;
+ autorepeat;
+ st,mode = <0>;
+ status = "okay";
+ };
+
+ rtc@e0580000 {
+ status = "okay";
+ };
+
+ serial@e0000000 {
+ status = "okay";
+ };
+
+ wdt@ec800620 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 0000000..9e61da4
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+ compatible = "st,spear1310";
+
+ ahb {
+ ahci@b1000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1000000 0x10000>;
+ interrupts = <0 68 0x4>;
+ status = "disabled";
+ };
+
+ ahci@b1800000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1800000 0x10000>;
+ interrupts = <0 69 0x4>;
+ status = "disabled";
+ };
+
+ ahci@b4000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb4000000 0x10000>;
+ interrupts = <0 70 0x4>;
+ status = "disabled";
+ };
+
+ gmac1: eth@5c400000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c400000 0x8000>;
+ interrupts = <0 95 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac2: eth@5c500000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c500000 0x8000>;
+ interrupts = <0 96 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac3: eth@5c600000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c600000 0x8000>;
+ interrupts = <0 97 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac4: eth@5c700000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c700000 0x8000>;
+ interrupts = <0 98 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ spi1: spi@5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ i2c1: i2c@5cd00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5cd00000 0x1000>;
+ interrupts = <0 87 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@5ce00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5ce00000 0x1000>;
+ interrupts = <0 88 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@5cf00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5cf00000 0x1000>;
+ interrupts = <0 89 0x4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5d000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d000000 0x1000>;
+ interrupts = <0 90 0x4>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@5d100000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d100000 0x1000>;
+ interrupts = <0 91 0x4>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@5d200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d200000 0x1000>;
+ interrupts = <0 92 0x4>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@5d300000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d300000 0x1000>;
+ interrupts = <0 93 0x4>;
+ status = "disabled";
+ };
+
+ serial@5c800000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5c800000 0x1000>;
+ interrupts = <0 82 0x4>;
+ status = "disabled";
+ };
+
+ serial@5c900000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5c900000 0x1000>;
+ interrupts = <0 83 0x4>;
+ status = "disabled";
+ };
+
+ serial@5ca00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5ca00000 0x1000>;
+ interrupts = <0 84 0x4>;
+ status = "disabled";
+ };
+
+ serial@5cb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5cb00000 0x1000>;
+ interrupts = <0 85 0x4>;
+ status = "disabled";
+ };
+
+ serial@5cc00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5cc00000 0x1000>;
+ interrupts = <0 86 0x4>;
+ status = "disabled";
+ };
+
+ thermal@e07008c4 {
+ st,thermal-flags = <0x7000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 0000000..0d8472e
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,308 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+ model = "ST SPEAr1340 Evaluation Board";
+ compatible = "st,spear1340-evb", "st,spear1340";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ pinmux@e0700000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pads_as_gpio {
+ st,pins = "pads_as_gpio_grp";
+ st,function = "pads_as_gpio";
+ };
+ fsmc {
+ st,pins = "fsmc_8bit_grp";
+ st,function = "fsmc";
+ };
+ kbd {
+ st,pins = "keyboard_row_col_grp",
+ "keyboard_col5_grp";
+ st,function = "keyboard";
+ };
+ uart0 {
+ st,pins = "uart0_grp", "uart0_enh_grp";
+ st,function = "uart0";
+ };
+ i2c0-pmx {
+ st,pins = "i2c0_grp";
+ st,function = "i2c0";
+ };
+ i2c1-pmx {
+ st,pins = "i2c1_grp";
+ st,function = "i2c1";
+ };
+ spdif-in {
+ st,pins = "spdif_in_grp";
+ st,function = "spdif_in";
+ };
+ spdif-out {
+ st,pins = "spdif_out_grp";
+ st,function = "spdif_out";
+ };
+ ssp0 {
+ st,pins = "ssp0_grp", "ssp0_cs1_grp",
+ "ssp0_cs3_grp";
+ st,function = "ssp0";
+ };
+ pwm {
+ st,pins = "pwm2_grp", "pwm3_grp";
+ st,function = "pwm";
+ };
+ smi-pmx {
+ st,pins = "smi_grp";
+ st,function = "smi";
+ };
+ i2s {
+ st,pins = "i2s_in_grp", "i2s_out_grp";
+ st,function = "i2s";
+ };
+ gmac {
+ st,pins = "gmii_grp", "rgmii_grp";
+ st,function = "gmac";
+ };
+ cam3 {
+ st,pins = "cam3_grp";
+ st,function = "cam3";
+ };
+ cec0 {
+ st,pins = "cec0_grp";
+ st,function = "cec0";
+ };
+ cec1 {
+ st,pins = "cec1_grp";
+ st,function = "cec1";
+ };
+ sdhci {
+ st,pins = "sdhci_grp";
+ st,function = "sdhci";
+ };
+ clcd {
+ st,pins = "clcd_grp";
+ st,function = "clcd";
+ };
+ sata {
+ st,pins = "sata_grp";
+ st,function = "sata";
+ };
+ };
+ };
+
+ dma@ea800000 {
+ status = "okay";
+ };
+
+ dma@eb000000 {
+ status = "okay";
+ };
+
+ fsmc: flash@b0000000 {
+ status = "okay";
+ };
+
+ gmac0: eth@e2000000 {
+ status = "okay";
+ };
+
+ sdhci@b3000000 {
+ status = "okay";
+ };
+
+ smi: flash@ea000000 {
+ status = "okay";
+ clock-rate=<50000000>;
+
+ flash@e6000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe6000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
+ };
+
+ spi0: spi@e0100000 {
+ status = "okay";
+ };
+
+ ehci@e4800000 {
+ status = "okay";
+ };
+
+ ehci@e5800000 {
+ status = "okay";
+ };
+
+ ohci@e4000000 {
+ status = "okay";
+ };
+
+ ohci@e5000000 {
+ status = "okay";
+ };
+
+ apb {
+ adc@e0080000 {
+ status = "okay";
+ };
+
+ gpio0: gpio@e0600000 {
+ status = "okay";
+ };
+
+ gpio1: gpio@e0680000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@e0280000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@b4000000 {
+ status = "okay";
+ };
+
+ kbd@e0300000 {
+ linux,keymap = < 0x00000001
+ 0x00010002
+ 0x00020003
+ 0x00030004
+ 0x00040005
+ 0x00050006
+ 0x00060007
+ 0x00070008
+ 0x00080009
+ 0x0100000a
+ 0x0101000c
+ 0x0102000d
+ 0x0103000e
+ 0x0104000f
+ 0x01050010
+ 0x01060011
+ 0x01070012
+ 0x01080013
+ 0x02000014
+ 0x02010015
+ 0x02020016
+ 0x02030017
+ 0x02040018
+ 0x02050019
+ 0x0206001a
+ 0x0207001b
+ 0x0208001c
+ 0x0300001d
+ 0x0301001e
+ 0x0302001f
+ 0x03030020
+ 0x03040021
+ 0x03050022
+ 0x03060023
+ 0x03070024
+ 0x03080025
+ 0x04000026
+ 0x04010027
+ 0x04020028
+ 0x04030029
+ 0x0404002a
+ 0x0405002b
+ 0x0406002c
+ 0x0407002d
+ 0x0408002e
+ 0x0500002f
+ 0x05010030
+ 0x05020031
+ 0x05030032
+ 0x05040033
+ 0x05050034
+ 0x05060035
+ 0x05070036
+ 0x05080037
+ 0x06000038
+ 0x06010039
+ 0x0602003a
+ 0x0603003b
+ 0x0604003c
+ 0x0605003d
+ 0x0606003e
+ 0x0607003f
+ 0x06080040
+ 0x07000041
+ 0x07010042
+ 0x07020043
+ 0x07030044
+ 0x07040045
+ 0x07050046
+ 0x07060047
+ 0x07070048
+ 0x07080049
+ 0x0800004a
+ 0x0801004b
+ 0x0802004c
+ 0x0803004d
+ 0x0804004e
+ 0x0805004f
+ 0x08060050
+ 0x08070051
+ 0x08080052 >;
+ autorepeat;
+ st,mode = <0>;
+ status = "okay";
+ };
+
+ rtc@e0580000 {
+ status = "okay";
+ };
+
+ serial@e0000000 {
+ status = "okay";
+ };
+
+ serial@b4100000 {
+ status = "okay";
+ };
+
+ wdt@ec800620 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 0000000..a26fc47
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+ compatible = "st,spear1340";
+
+ ahb {
+ ahci@b1000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1000000 0x10000>;
+ interrupts = <0 72 0x4>;
+ status = "disabled";
+ };
+
+ spi1: spi@5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ i2c1: i2c@b4000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xb4000000 0x1000>;
+ interrupts = <0 104 0x4>;
+ status = "disabled";
+ };
+
+ serial@b4100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb4100000 0x1000>;
+ interrupts = <0 105 0x4>;
+ status = "disabled";
+ };
+
+ thermal@e07008c4 {
+ st,thermal-flags = <0x2a00>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 0000000..1f8e1e1
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,262 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ gic: interrupt-controller@ec801000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0xec801000 0x1000 >,
+ < 0xec800100 0x0100 >;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 8 0x04
+ 0 9 0x04>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xed000000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyAMA0,115200";
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x50000000 0x50000000 0x10000000
+ 0xb0000000 0xb0000000 0x10000000
+ 0xe0000000 0xe0000000 0x10000000>;
+
+ sdhci@b3000000 {
+ compatible = "st,sdhci-spear";
+ reg = <0xb3000000 0x100>;
+ interrupts = <0 28 0x4>;
+ status = "disabled";
+ };
+
+ cf@b2800000 {
+ compatible = "arasan,cf-spear1340";
+ reg = <0xb2800000 0x100>;
+ interrupts = <0 29 0x4>;
+ status = "disabled";
+ };
+
+ dma@ea800000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xea800000 0x1000>;
+ interrupts = <0 19 0x4>;
+ status = "disabled";
+ };
+
+ dma@eb000000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xeb000000 0x1000>;
+ interrupts = <0 59 0x4>;
+ status = "disabled";
+ };
+
+ fsmc: flash@b0000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000000 0x1000 /* FSMC Register */
+ 0xb0800000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ interrupts = <0 20 0x4
+ 0 21 0x4
+ 0 22 0x4
+ 0 23 0x4>;
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ gmac0: eth@e2000000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe2000000 0x8000>;
+ interrupts = <0 23 0x4
+ 0 24 0x4>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ status = "disabled";
+ };
+
+ smi: flash@ea000000 {
+ compatible = "st,spear600-smi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xea000000 0x1000>;
+ interrupts = <0 30 0x4>;
+ status = "disabled";
+ };
+
+ spi0: spi@e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ interrupts = <0 31 0x4>;
+ status = "disabled";
+ };
+
+ ehci@e4800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe4800000 0x1000>;
+ interrupts = <0 64 0x4>;
+ status = "disabled";
+ };
+
+ ehci@e5800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe5800000 0x1000>;
+ interrupts = <0 66 0x4>;
+ status = "disabled";
+ };
+
+ ohci@e4000000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe4000000 0x1000>;
+ interrupts = <0 65 0x4>;
+ status = "disabled";
+ };
+
+ ohci@e5000000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe5000000 0x1000>;
+ interrupts = <0 67 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x50000000 0x50000000 0x10000000
+ 0xb0000000 0xb0000000 0x10000000
+ 0xe0000000 0xe0000000 0x10000000>;
+
+ gpio0: gpio@e0600000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xe0600000 0x1000>;
+ interrupts = <0 24 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@e0680000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xe0680000 0x1000>;
+ interrupts = <0 25 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ kbd@e0300000 {
+ compatible = "st,spear300-kbd";
+ reg = <0xe0300000 0x1000>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@e0280000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xe0280000 0x1000>;
+ interrupts = <0 41 0x4>;
+ status = "disabled";
+ };
+
+ rtc@e0580000 {
+ compatible = "st,spear-rtc";
+ reg = <0xe0580000 0x1000>;
+ interrupts = <0 36 0x4>;
+ status = "disabled";
+ };
+
+ serial@e0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xe0000000 0x1000>;
+ interrupts = <0 36 0x4>;
+ status = "disabled";
+ };
+
+ adc@e0080000 {
+ compatible = "st,spear600-adc";
+ reg = <0xe0080000 0x1000>;
+ interrupts = <0 44 0x4>;
+ status = "disabled";
+ };
+
+ timer@e0380000 {
+ compatible = "st,spear-timer";
+ reg = <0xe0380000 0x400>;
+ interrupts = <0 37 0x4>;
+ };
+
+ timer@ec800600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xec800600 0x20>;
+ interrupts = <1 13 0x301>;
+ };
+
+ wdt@ec800620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0xec800620 0x20>;
+ status = "disabled";
+ };
+
+ thermal@e07008c4 {
+ compatible = "st,thermal-spear1340";
+ reg = <0xe07008c4 0x4>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 910e264..fc82b1a 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -87,6 +87,31 @@
smi: flash@fc000000 {
status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
};
spi0: spi@d0100000 {
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index 6d95317..dc5e2d44 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -103,11 +103,27 @@
clock-rate=<50000000>;
flash@f8000000 {
- label = "m25p64";
- reg = <0xf8000000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 0c6463b..6308fa3 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -110,6 +110,31 @@
smi: flash@fc000000 {
status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
};
spi0: spi@d0100000 {
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 0ae7c8e..91072553 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -139,6 +139,12 @@
interrupts = <12>;
status = "disabled";
};
+
+ timer@f0000000 {
+ compatible = "st,spear-timer";
+ reg = <0xf0000000 0x400>;
+ interrupts = <2>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
index 790a7a8..1119c22 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -33,6 +33,35 @@
status = "okay";
};
+ smi: flash@fc000000 {
+ status = "okay";
+ clock-rate=<50000000>;
+
+ flash@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x40000>;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x2c0000>;
+ };
+ partition@310000 {
+ label = "rootfs";
+ reg = <0x310000 0x4f0000>;
+ };
+ };
+ };
+
apb {
serial@d0000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index d777e3a..089f0a4 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -177,6 +177,12 @@
interrupts = <28>;
status = "disabled";
};
+
+ timer@f0000000 {
+ compatible = "st,spear-timer";
+ reg = <0xf0000000 0x400>;
+ interrupts = <16>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts
index 0a9f34a..36321bce 100644
--- a/arch/arm/boot/dts/tegra-cardhu.dts
+++ b/arch/arm/boot/dts/tegra-cardhu.dts
@@ -7,10 +7,10 @@
compatible = "nvidia,cardhu", "nvidia,tegra30";
memory {
- reg = < 0x80000000 0x40000000 >;
+ reg = <0x80000000 0x40000000>;
};
- pinmux@70000000 {
+ pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -51,64 +51,122 @@
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
+ dap2_fs_pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
};
};
serial@70006000 {
- clock-frequency = < 408000000 >;
- };
-
- serial@70006040 {
- status = "disable";
- };
-
- serial@70006200 {
- status = "disable";
- };
-
- serial@70006300 {
- status = "disable";
- };
-
- serial@70006400 {
- status = "disable";
+ status = "okay";
+ clock-frequency = <408000000>;
};
i2c@7000c000 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
+ status = "okay";
clock-frequency = <100000>;
+
+ /* ALS and Proximity sensor */
+ isl29028@44 {
+ compatible = "isil,isl29028";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <88 0x04>; /*gpio PL0 */
+ };
};
i2c@7000c700 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
+ status = "okay";
clock-frequency = <100000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <179 0x04>; /* gpio PW3 */
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+ };
+
+ tps62361 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ };
+ };
+
+ ahub {
+ i2s@70080400 {
+ status = "okay";
+ };
};
sdhci@78000000 {
+ status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ bus-width = <4>;
};
- sdhci@78000200 {
- status = "disable";
- };
-
- sdhci@78000400 {
- status = "disable";
- };
-
- sdhci@78000400 {
+ sdhci@78000600 {
+ status = "okay";
support-8bit;
+ bus-width = <8>;
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-cardhu",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Cardhu";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
};
};
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 1a0b1f1..7de7013 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -6,11 +6,11 @@
model = "NVIDIA Tegra2 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
- memory@0 {
- reg = < 0x00000000 0x40000000 >;
+ memory {
+ reg = <0x00000000 0x40000000>;
};
- pinmux@70000000 {
+ pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -167,28 +167,28 @@
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
- "cdev1", "dap1", "dtb", "gma", "gmb",
- "gmc", "gmd", "gme", "gpu7", "gpv",
- "i2cp", "pta", "rm", "slxa", "slxk",
- "spia", "spib";
+ "cdev1", "cdev2", "dap1", "dtb", "gma",
+ "gmb", "gmc", "gmd", "gme", "gpu7",
+ "gpv", "i2cp", "pta", "rm", "slxa",
+ "slxk", "spia", "spib", "uac";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
- conf_cdev2 {
- nvidia,pins = "cdev2", "csus", "spid", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
- };
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
+ conf_csus {
+ nvidia,pins = "csus", "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
"dtc", "dte", "dtf", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
- "uac", "uda";
+ "uda";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
@@ -234,42 +234,81 @@
};
};
- pmc@7000f400 {
- nvidia,invert-interrupt;
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ clock-frequency = <216000000>;
};
i2c@7000c000 {
+ status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = < 187 0x04 >;
+ interrupts = <187 0x04>;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
- gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
};
i2c@7000c400 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
+ status = "okay";
clock-frequency = <400000>;
};
- i2s@70002a00 {
- status = "disable";
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
+ usb@c5000000 {
+ status = "okay";
+ };
+
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000200 {
+ status = "okay";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
+ bus-width = <8>;
};
sound {
@@ -295,45 +334,4 @@
nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
-
- serial@70006000 {
- status = "disable";
- };
-
- serial@70006040 {
- status = "disable";
- };
-
- serial@70006200 {
- status = "disable";
- };
-
- serial@70006300 {
- clock-frequency = < 216000000 >;
- };
-
- serial@70006400 {
- status = "disable";
- };
-
- sdhci@c8000000 {
- status = "disable";
- };
-
- sdhci@c8000200 {
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
- };
-
- sdhci@c8000400 {
- status = "disable";
- };
-
- sdhci@c8000600 {
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
- wp-gpios = <&gpio 59 0>; /* gpio PH3 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
- support-8bit;
- };
};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 10943fb..bfeb117 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -6,11 +6,11 @@
model = "Toshiba AC100 / Dynabook AZ";
compatible = "compal,paz00", "nvidia,tegra20";
- memory@0 {
+ memory {
reg = <0x00000000 0x20000000>;
};
- pinmux@70000000 {
+ pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -159,18 +159,14 @@
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
- "cdev1", "dap1", "dap2", "dtf", "gma",
- "gmb", "gmc", "gmd", "gme", "gpu",
- "gpu7", "gpv", "i2cp", "pta", "rm",
- "sdio1", "slxk", "spdo", "uac", "uda";
+ "cdev1", "cdev2", "dap1", "dap2", "dtf",
+ "gma", "gmb", "gmc", "gmd", "gme",
+ "gpu", "gpu7", "gpv", "i2cp", "pta",
+ "rm", "sdio1", "slxk", "spdo", "uac",
+ "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
- conf_cdev2 {
- nvidia,pins = "cdev2";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- };
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
@@ -230,7 +226,22 @@
};
};
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
+ serial@70006200 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
i2c@7000c000 {
+ status = "okay";
clock-frequency = <400000>;
alc5632: alc5632@1e {
@@ -242,25 +253,23 @@
};
i2c@7000c400 {
+ status = "okay";
clock-frequency = <400000>;
};
- i2c@7000c500 {
- status = "disable";
- };
-
- nvec@7000c500 {
+ nvec {
+ compatible = "nvidia,nvec";
+ reg = <0x7000c500 0x100>;
+ interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,nvec";
- reg = <0x7000C500 0x100>;
- interrupts = <0 92 0x04>;
clock-frequency = <80000>;
- request-gpios = <&gpio 170 0>;
+ request-gpios = <&gpio 170 0>; /* gpio PV2 */
slave-addr = <138>;
};
i2c@7000d000 {
+ status = "okay";
clock-frequency = <400000>;
adt7461@4c {
@@ -269,8 +278,52 @@
};
};
- i2s@70002a00 {
- status = "disable";
+ usb@c5000000 {
+ status = "okay";
+ };
+
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000000 {
+ status = "okay";
+ cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ support-8bit;
+ bus-width = <8>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 79 1>; /* gpio PJ7, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "wifi-led";
+ gpios = <&gpio 24 0>; /* gpio PD0 */
+ linux,default-trigger = "rfkill0";
+ };
};
sound {
@@ -292,63 +345,4 @@
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
};
-
- serial@70006000 {
- clock-frequency = <216000000>;
- };
-
- serial@70006040 {
- status = "disable";
- };
-
- serial@70006200 {
- clock-frequency = <216000000>;
- };
-
- serial@70006300 {
- status = "disable";
- };
-
- serial@70006400 {
- status = "disable";
- };
-
- sdhci@c8000000 {
- cd-gpios = <&gpio 173 0>; /* gpio PV5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 169 0>; /* gpio PV1 */
- };
-
- sdhci@c8000200 {
- status = "disable";
- };
-
- sdhci@c8000400 {
- status = "disable";
- };
-
- sdhci@c8000600 {
- support-8bit;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power";
- gpios = <&gpio 79 1>; /* gpio PJ7, active low */
- linux,code = <116>; /* KEY_POWER */
- gpio-key,wakeup;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "wifi-led";
- gpios = <&gpio 24 0>;
- linux,default-trigger = "rfkill0";
- };
- };
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index ec33116f..89cb7f2 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -7,11 +7,10 @@
compatible = "nvidia,seaboard", "nvidia,tegra20";
memory {
- device_type = "memory";
- reg = < 0x00000000 0x40000000 >;
+ reg = <0x00000000 0x40000000>;
};
- pinmux@70000000 {
+ pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -100,7 +99,7 @@
};
hdint {
nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
- "lsck", "lsda", "pta";
+ "lsck", "lsda";
nvidia,function = "hdmi";
};
i2cp {
@@ -134,6 +133,10 @@
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
@@ -254,110 +257,150 @@
};
};
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
i2c@7000c000 {
+ status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = < 187 0x04 >;
+ interrupts = <187 0x04>;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
- gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+ };
+
+ /* ALS and proximity sensor */
+ isl29018@44 {
+ compatible = "isil,isl29018";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <202 0x04>; /* GPIO PZ2 */
+ };
+
+ gyrometer@68 {
+ compatible = "invn,mpu3050";
+ reg = <0x68>;
+ interrupt-parent = <&gpio>;
+ interrupts = <204 0x04>; /* gpio PZ4 */
};
};
i2c@7000c400 {
- clock-frequency = <400000>;
+ status = "okay";
+ clock-frequency = <100000>;
+
+ smart-battery@b {
+ compatible = "ti,bq20z75", "smart-battery-1.1";
+ reg = <0xb>;
+ ti,i2c-retry-count = <2>;
+ ti,poll-retry-count = <10>;
+ };
};
i2c@7000c500 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
+ status = "okay";
clock-frequency = <400000>;
- adt7461@4c {
- compatible = "adt7461";
+ temperature-sensor@4c {
+ compatible = "nct1008";
reg = <0x4c>;
};
+
+ magnetometer@c {
+ compatible = "ak8975";
+ reg = <0xc>;
+ interrupt-parent = <&gpio>;
+ interrupts = <109 0x04>; /* gpio PN5 */
+ };
};
- i2s@70002a00 {
- status = "disable";
- };
+ emc {
+ emc-table@190000 {
+ reg = <190000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <190000>;
+ nvidia,emc-registers = <0x0000000c 0x00000026
+ 0x00000009 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x0000059f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000b 0x000000c8
+ 0x00000003 0x00000007 0x00000004 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xa06204ae
+ 0x007dc010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
- sound {
- compatible = "nvidia,tegra-audio-wm8903-seaboard",
- "nvidia,tegra-audio-wm8903";
- nvidia,model = "NVIDIA Tegra Seaboard";
-
- nvidia,audio-routing =
- "Headphone Jack", "HPOUTR",
- "Headphone Jack", "HPOUTL",
- "Int Spk", "ROP",
- "Int Spk", "RON",
- "Int Spk", "LOP",
- "Int Spk", "LON",
- "Mic Jack", "MICBIAS",
- "IN1R", "Mic Jack";
-
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,audio-codec = <&wm8903>;
-
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
- };
-
- serial@70006000 {
- status = "disable";
- };
-
- serial@70006040 {
- status = "disable";
- };
-
- serial@70006200 {
- status = "disable";
- };
-
- serial@70006300 {
- clock-frequency = < 216000000 >;
- };
-
- serial@70006400 {
- status = "disable";
- };
-
- sdhci@c8000000 {
- status = "disable";
- };
-
- sdhci@c8000200 {
- status = "disable";
- };
-
- sdhci@c8000400 {
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
- };
-
- sdhci@c8000600 {
- support-8bit;
+ emc-table@380000 {
+ reg = <380000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <380000>;
+ nvidia,emc-registers = <0x00000017 0x0000004b
+ 0x00000012 0x00000006 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000b5f
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe044048b
+ 0x007d8010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
};
usb@c5000000 {
+ status = "okay";
nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
dr_mode = "otg";
};
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000400 {
+ status = "okay";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ support-8bit;
+ bus-width = <8>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -378,41 +421,25 @@
};
};
- emc@7000f400 {
- emc-table@190000 {
- reg = < 190000 >;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = < 190000 >;
- nvidia,emc-registers = < 0x0000000c 0x00000026
- 0x00000009 0x00000003 0x00000004 0x00000004
- 0x00000002 0x0000000c 0x00000003 0x00000003
- 0x00000002 0x00000001 0x00000004 0x00000005
- 0x00000004 0x00000009 0x0000000d 0x0000059f
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000003 0x00000001 0x0000000b 0x000000c8
- 0x00000003 0x00000007 0x00000004 0x0000000f
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0xa06204ae
- 0x007dc010 0x00000000 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000 >;
- };
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-seaboard",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Seaboard";
- emc-table@380000 {
- reg = < 380000 >;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = < 380000 >;
- nvidia,emc-registers = < 0x00000017 0x0000004b
- 0x00000012 0x00000006 0x00000004 0x00000005
- 0x00000003 0x0000000c 0x00000006 0x00000006
- 0x00000003 0x00000001 0x00000004 0x00000005
- 0x00000004 0x00000009 0x0000000d 0x00000b5f
- 0x00000000 0x00000003 0x00000003 0x00000006
- 0x00000006 0x00000001 0x00000011 0x000000c8
- 0x00000003 0x0000000e 0x00000007 0x0000000f
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0xe044048b
- 0x007d8010 0x00000000 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000 >;
- };
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1R", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
};
};
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
index 98efd5b..9de5636 100644
--- a/arch/arm/boot/dts/tegra-trimslice.dts
+++ b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -6,11 +6,11 @@
model = "Compulab TrimSlice board";
compatible = "compulab,trimslice", "nvidia,tegra20";
- memory@0 {
- reg = < 0x00000000 0x40000000 >;
+ memory {
+ reg = <0x00000000 0x40000000>;
};
- pinmux@70000000 {
+ pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -182,23 +182,23 @@
nvidia,tristate = <1>;
};
conf_atb {
- nvidia,pins = "atb", "cdev1", "dap1", "gma",
- "gmc", "gmd", "gpu", "gpu7", "gpv",
- "sdio1", "slxa", "slxk", "uac";
+ nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
+ "gma", "gmc", "gmd", "gpu", "gpu7",
+ "gpv", "sdio1", "slxa", "slxk", "uac";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
- conf_cdev2 {
- nvidia,pins = "cdev2", "csus", "spia", "spib",
- "spid", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
- };
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
+ conf_csus {
+ nvidia,pins = "csus", "spia", "spib",
+ "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
conf_ddc {
nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
nvidia,pull = <2>;
@@ -240,68 +240,67 @@
};
};
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
i2c@7000c000 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000c400 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
+ status = "okay";
clock-frequency = <400000>;
+
+ codec: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+
+ rtc@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
};
- i2c@7000d000 {
- status = "disable";
+ usb@c5000000 {
+ status = "okay";
};
- i2s@70002800 {
- status = "disable";
+ usb@c5004000 {
+ nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
- i2s@70002a00 {
- status = "disable";
- };
-
- das@70000c00 {
- status = "disable";
- };
-
- serial@70006000 {
- clock-frequency = < 216000000 >;
- };
-
- serial@70006040 {
- status = "disable";
- };
-
- serial@70006200 {
- status = "disable";
- };
-
- serial@70006300 {
- status = "disable";
- };
-
- serial@70006400 {
- status = "disable";
+ usb@c5008000 {
+ status = "okay";
};
sdhci@c8000000 {
- status = "disable";
- };
-
- sdhci@c8000200 {
- status = "disable";
- };
-
- sdhci@c8000400 {
- status = "disable";
+ status = "okay";
+ bus-width = <4>;
};
sdhci@c8000600 {
- cd-gpios = <&gpio 121 0>;
- wp-gpios = <&gpio 122 0>;
+ status = "okay";
+ cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+ wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+ bus-width = <4>;
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-trimslice";
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&codec>;
};
};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index 71eb2e5..445343b 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -7,10 +7,10 @@
compatible = "nvidia,ventana", "nvidia,tegra20";
memory {
- reg = < 0x00000000 0x40000000 >;
+ reg = <0x00000000 0x40000000>;
};
- pinmux@70000000 {
+ pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -240,38 +240,82 @@
};
};
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
i2c@7000c000 {
+ status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = < 187 0x04 >;
+ interrupts = <187 0x04>;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
- gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+ };
+
+ /* ALS and proximity sensor */
+ isl29018@44 {
+ compatible = "isil,isl29018";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <202 0x04>; /*gpio PZ2 */
};
};
i2c@7000c400 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
+ status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
+ status = "okay";
clock-frequency = <400000>;
};
- i2s@70002a00 {
- status = "disable";
+ usb@c5000000 {
+ status = "okay";
+ };
+
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000400 {
+ status = "okay";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ support-8bit;
+ bus-width = <8>;
};
sound {
@@ -294,45 +338,7 @@
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
- nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
-
- serial@70006000 {
- status = "disable";
- };
-
- serial@70006040 {
- status = "disable";
- };
-
- serial@70006200 {
- status = "disable";
- };
-
- serial@70006300 {
- clock-frequency = < 216000000 >;
- };
-
- serial@70006400 {
- status = "disable";
- };
-
- sdhci@c8000000 {
- status = "disable";
- };
-
- sdhci@c8000200 {
- status = "disable";
- };
-
- sdhci@c8000400 {
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
- };
-
- sdhci@c8000600 {
- support-8bit;
- };
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 108e894..c417d67 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,17 +4,237 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
- pmc@7000f400 {
+ intc: interrupt-controller {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x50041000 0x1000
+ 0x50040100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ apbdma: dma {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = <0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04>;
+ };
+
+ ahb {
+ compatible = "nvidia,tegra20-ahb";
+ reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+ };
+
+ gpio: gpio {
+ compatible = "nvidia,tegra20-gpio";
+ reg = <0x6000d000 0x1000>;
+ interrupts = <0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ pinmux: pinmux {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = <0x70000014 0x10 /* Tri-state registers */
+ 0x70000080 0x20 /* Mux registers */
+ 0x700000a0 0x14 /* Pull-up/down registers */
+ 0x70000868 0xa8>; /* Pad control registers */
+ };
+
+ das {
+ compatible = "nvidia,tegra20-das";
+ reg = <0x70000c00 0x80>;
+ };
+
+ tegra_i2s1: i2s@70002800 {
+ compatible = "nvidia,tegra20-i2s";
+ reg = <0x70002800 0x200>;
+ interrupts = <0 13 0x04>;
+ nvidia,dma-request-selector = <&apbdma 2>;
+ status = "disable";
+ };
+
+ tegra_i2s2: i2s@70002a00 {
+ compatible = "nvidia,tegra20-i2s";
+ reg = <0x70002a00 0x200>;
+ interrupts = <0 3 0x04>;
+ nvidia,dma-request-selector = <&apbdma 1>;
+ status = "disable";
+ };
+
+ serial@70006000 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006000 0x40>;
+ reg-shift = <2>;
+ interrupts = <0 36 0x04>;
+ status = "disable";
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006040 0x40>;
+ reg-shift = <2>;
+ interrupts = <0 37 0x04>;
+ status = "disable";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006200 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 46 0x04>;
+ status = "disable";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006300 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 90 0x04>;
+ status = "disable";
+ };
+
+ serial@70006400 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006400 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 91 0x04>;
+ status = "disable";
+ };
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000c400 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <0 84 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000c500 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <0 92 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000d000 {
+ compatible = "nvidia,tegra20-i2c-dvc";
+ reg = <0x7000d000 0x200>;
+ interrupts = <0 53 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
};
- intc: interrupt-controller@50041000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x50041000 0x1000 >,
- < 0x50040100 0x0100 >;
+ mc {
+ compatible = "nvidia,tegra20-mc";
+ reg = <0x7000f000 0x024
+ 0x7000f03c 0x3c4>;
+ interrupts = <0 77 0x04>;
+ };
+
+ gart {
+ compatible = "nvidia,tegra20-gart";
+ reg = <0x7000f024 0x00000018 /* controller registers */
+ 0x58000000 0x02000000>; /* GART aperture */
+ };
+
+ emc {
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f400 0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb@c5000000 {
+ compatible = "nvidia,tegra20-ehci", "usb-ehci";
+ reg = <0xc5000000 0x4000>;
+ interrupts = <0 20 0x04>;
+ phy_type = "utmi";
+ nvidia,has-legacy-mode;
+ status = "disable";
+ };
+
+ usb@c5004000 {
+ compatible = "nvidia,tegra20-ehci", "usb-ehci";
+ reg = <0xc5004000 0x4000>;
+ interrupts = <0 21 0x04>;
+ phy_type = "ulpi";
+ status = "disable";
+ };
+
+ usb@c5008000 {
+ compatible = "nvidia,tegra20-ehci", "usb-ehci";
+ reg = <0xc5008000 0x4000>;
+ interrupts = <0 97 0x04>;
+ phy_type = "utmi";
+ status = "disable";
+ };
+
+ sdhci@c8000000 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000000 0x200>;
+ interrupts = <0 14 0x04>;
+ status = "disable";
+ };
+
+ sdhci@c8000200 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000200 0x200>;
+ interrupts = <0 15 0x04>;
+ status = "disable";
+ };
+
+ sdhci@c8000400 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000400 0x200>;
+ interrupts = <0 19 0x04>;
+ status = "disable";
+ };
+
+ sdhci@c8000600 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000600 0x200>;
+ interrupts = <0 31 0x04>;
+ status = "disable";
};
pmu {
@@ -22,189 +242,4 @@
interrupts = <0 56 0x04
0 57 0x04>;
};
-
- apbdma: dma@6000a000 {
- compatible = "nvidia,tegra20-apbdma";
- reg = <0x6000a000 0x1200>;
- interrupts = < 0 104 0x04
- 0 105 0x04
- 0 106 0x04
- 0 107 0x04
- 0 108 0x04
- 0 109 0x04
- 0 110 0x04
- 0 111 0x04
- 0 112 0x04
- 0 113 0x04
- 0 114 0x04
- 0 115 0x04
- 0 116 0x04
- 0 117 0x04
- 0 118 0x04
- 0 119 0x04 >;
- };
-
- i2c@7000c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra20-i2c";
- reg = <0x7000C000 0x100>;
- interrupts = < 0 38 0x04 >;
- };
-
- i2c@7000c400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra20-i2c";
- reg = <0x7000C400 0x100>;
- interrupts = < 0 84 0x04 >;
- };
-
- i2c@7000c500 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra20-i2c";
- reg = <0x7000C500 0x100>;
- interrupts = < 0 92 0x04 >;
- };
-
- i2c@7000d000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra20-i2c-dvc";
- reg = <0x7000D000 0x200>;
- interrupts = < 0 53 0x04 >;
- };
-
- tegra_i2s1: i2s@70002800 {
- compatible = "nvidia,tegra20-i2s";
- reg = <0x70002800 0x200>;
- interrupts = < 0 13 0x04 >;
- nvidia,dma-request-selector = < &apbdma 2 >;
- };
-
- tegra_i2s2: i2s@70002a00 {
- compatible = "nvidia,tegra20-i2s";
- reg = <0x70002a00 0x200>;
- interrupts = < 0 3 0x04 >;
- nvidia,dma-request-selector = < &apbdma 1 >;
- };
-
- das@70000c00 {
- compatible = "nvidia,tegra20-das";
- reg = <0x70000c00 0x80>;
- };
-
- gpio: gpio@6000d000 {
- compatible = "nvidia,tegra20-gpio";
- reg = < 0x6000d000 0x1000 >;
- interrupts = < 0 32 0x04
- 0 33 0x04
- 0 34 0x04
- 0 35 0x04
- 0 55 0x04
- 0 87 0x04
- 0 89 0x04 >;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- pinmux: pinmux@70000000 {
- compatible = "nvidia,tegra20-pinmux";
- reg = < 0x70000014 0x10 /* Tri-state registers */
- 0x70000080 0x20 /* Mux registers */
- 0x700000a0 0x14 /* Pull-up/down registers */
- 0x70000868 0xa8 >; /* Pad control registers */
- };
-
- serial@70006000 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006000 0x40>;
- reg-shift = <2>;
- interrupts = < 0 36 0x04 >;
- };
-
- serial@70006040 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006040 0x40>;
- reg-shift = <2>;
- interrupts = < 0 37 0x04 >;
- };
-
- serial@70006200 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006200 0x100>;
- reg-shift = <2>;
- interrupts = < 0 46 0x04 >;
- };
-
- serial@70006300 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006300 0x100>;
- reg-shift = <2>;
- interrupts = < 0 90 0x04 >;
- };
-
- serial@70006400 {
- compatible = "nvidia,tegra20-uart";
- reg = <0x70006400 0x100>;
- reg-shift = <2>;
- interrupts = < 0 91 0x04 >;
- };
-
- emc@7000f400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra20-emc";
- reg = <0x7000f400 0x200>;
- };
-
- sdhci@c8000000 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000000 0x200>;
- interrupts = < 0 14 0x04 >;
- };
-
- sdhci@c8000200 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000200 0x200>;
- interrupts = < 0 15 0x04 >;
- };
-
- sdhci@c8000400 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000400 0x200>;
- interrupts = < 0 19 0x04 >;
- };
-
- sdhci@c8000600 {
- compatible = "nvidia,tegra20-sdhci";
- reg = <0xc8000600 0x200>;
- interrupts = < 0 31 0x04 >;
- };
-
- usb@c5000000 {
- compatible = "nvidia,tegra20-ehci", "usb-ehci";
- reg = <0xc5000000 0x4000>;
- interrupts = < 0 20 0x04 >;
- phy_type = "utmi";
- nvidia,has-legacy-mode;
- };
-
- usb@c5004000 {
- compatible = "nvidia,tegra20-ehci", "usb-ehci";
- reg = <0xc5004000 0x4000>;
- interrupts = < 0 21 0x04 >;
- phy_type = "ulpi";
- };
-
- usb@c5008000 {
- compatible = "nvidia,tegra20-ehci", "usb-ehci";
- reg = <0xc5008000 0x4000>;
- interrupts = < 0 97 0x04 >;
- phy_type = "utmi";
- };
};
-
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 62a7b39..2dcc09e 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,17 +4,261 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
- pmc@7000f400 {
+ intc: interrupt-controller {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x50041000 0x1000
+ 0x50040100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ apbdma: dma {
+ compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1400>;
+ interrupts = <0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04
+ 0 128 0x04
+ 0 129 0x04
+ 0 130 0x04
+ 0 131 0x04
+ 0 132 0x04
+ 0 133 0x04
+ 0 134 0x04
+ 0 135 0x04
+ 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04>;
+ };
+
+ ahb: ahb {
+ compatible = "nvidia,tegra30-ahb";
+ reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
+ };
+
+ gpio: gpio {
+ compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
+ reg = <0x6000d000 0x1000>;
+ interrupts = <0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04
+ 0 125 0x04>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ pinmux: pinmux {
+ compatible = "nvidia,tegra30-pinmux";
+ reg = <0x70000868 0xd0 /* Pad control registers */
+ 0x70003000 0x3e0>; /* Mux registers */
+ };
+
+ serial@70006000 {
+ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+ reg = <0x70006000 0x40>;
+ reg-shift = <2>;
+ interrupts = <0 36 0x04>;
+ status = "disable";
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+ reg = <0x70006040 0x40>;
+ reg-shift = <2>;
+ interrupts = <0 37 0x04>;
+ status = "disable";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+ reg = <0x70006200 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 46 0x04>;
+ status = "disable";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+ reg = <0x70006300 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 90 0x04>;
+ status = "disable";
+ };
+
+ serial@70006400 {
+ compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+ reg = <0x70006400 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 91 0x04>;
+ status = "disable";
+ };
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000c400 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <0 84 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000c500 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <0 92 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000c700 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c700 0x100>;
+ interrupts = <0 120 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ i2c@7000d000 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000d000 0x100>;
+ interrupts = <0 53 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ pmc {
compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
};
- intc: interrupt-controller@50041000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x50041000 0x1000 >,
- < 0x50040100 0x0100 >;
+ mc {
+ compatible = "nvidia,tegra30-mc";
+ reg = <0x7000f000 0x010
+ 0x7000f03c 0x1b4
+ 0x7000f200 0x028
+ 0x7000f284 0x17c>;
+ interrupts = <0 77 0x04>;
+ };
+
+ smmu {
+ compatible = "nvidia,tegra30-smmu";
+ reg = <0x7000f010 0x02c
+ 0x7000f1f0 0x010
+ 0x7000f228 0x05c>;
+ nvidia,#asids = <4>; /* # of ASIDs */
+ dma-window = <0 0x40000000>; /* IOVA start & length */
+ nvidia,ahb = <&ahb>;
+ };
+
+ ahub {
+ compatible = "nvidia,tegra30-ahub";
+ reg = <0x70080000 0x200
+ 0x70080200 0x100>;
+ interrupts = <0 103 0x04>;
+ nvidia,dma-request-selector = <&apbdma 1>;
+
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tegra_i2s0: i2s@70080300 {
+ compatible = "nvidia,tegra30-i2s";
+ reg = <0x70080300 0x100>;
+ nvidia,ahub-cif-ids = <4 4>;
+ status = "disable";
+ };
+
+ tegra_i2s1: i2s@70080400 {
+ compatible = "nvidia,tegra30-i2s";
+ reg = <0x70080400 0x100>;
+ nvidia,ahub-cif-ids = <5 5>;
+ status = "disable";
+ };
+
+ tegra_i2s2: i2s@70080500 {
+ compatible = "nvidia,tegra30-i2s";
+ reg = <0x70080500 0x100>;
+ nvidia,ahub-cif-ids = <6 6>;
+ status = "disable";
+ };
+
+ tegra_i2s3: i2s@70080600 {
+ compatible = "nvidia,tegra30-i2s";
+ reg = <0x70080600 0x100>;
+ nvidia,ahub-cif-ids = <7 7>;
+ status = "disable";
+ };
+
+ tegra_i2s4: i2s@70080700 {
+ compatible = "nvidia,tegra30-i2s";
+ reg = <0x70080700 0x100>;
+ nvidia,ahub-cif-ids = <8 8>;
+ status = "disable";
+ };
+ };
+
+ sdhci@78000000 {
+ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+ reg = <0x78000000 0x200>;
+ interrupts = <0 14 0x04>;
+ status = "disable";
+ };
+
+ sdhci@78000200 {
+ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+ reg = <0x78000200 0x200>;
+ interrupts = <0 15 0x04>;
+ status = "disable";
+ };
+
+ sdhci@78000400 {
+ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+ reg = <0x78000400 0x200>;
+ interrupts = <0 19 0x04>;
+ status = "disable";
+ };
+
+ sdhci@78000600 {
+ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+ reg = <0x78000600 0x200>;
+ interrupts = <0 31 0x04>;
+ status = "disable";
};
pmu {
@@ -24,163 +268,4 @@
0 146 0x04
0 147 0x04>;
};
-
- apbdma: dma@6000a000 {
- compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
- reg = <0x6000a000 0x1400>;
- interrupts = < 0 104 0x04
- 0 105 0x04
- 0 106 0x04
- 0 107 0x04
- 0 108 0x04
- 0 109 0x04
- 0 110 0x04
- 0 111 0x04
- 0 112 0x04
- 0 113 0x04
- 0 114 0x04
- 0 115 0x04
- 0 116 0x04
- 0 117 0x04
- 0 118 0x04
- 0 119 0x04
- 0 128 0x04
- 0 129 0x04
- 0 130 0x04
- 0 131 0x04
- 0 132 0x04
- 0 133 0x04
- 0 134 0x04
- 0 135 0x04
- 0 136 0x04
- 0 137 0x04
- 0 138 0x04
- 0 139 0x04
- 0 140 0x04
- 0 141 0x04
- 0 142 0x04
- 0 143 0x04 >;
- };
-
- i2c@7000c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C000 0x100>;
- interrupts = < 0 38 0x04 >;
- };
-
- i2c@7000c400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C400 0x100>;
- interrupts = < 0 84 0x04 >;
- };
-
- i2c@7000c500 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C500 0x100>;
- interrupts = < 0 92 0x04 >;
- };
-
- i2c@7000c700 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000c700 0x100>;
- interrupts = < 0 120 0x04 >;
- };
-
- i2c@7000d000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000D000 0x100>;
- interrupts = < 0 53 0x04 >;
- };
-
- gpio: gpio@6000d000 {
- compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
- reg = < 0x6000d000 0x1000 >;
- interrupts = < 0 32 0x04
- 0 33 0x04
- 0 34 0x04
- 0 35 0x04
- 0 55 0x04
- 0 87 0x04
- 0 89 0x04
- 0 125 0x04 >;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- serial@70006000 {
- compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
- reg = <0x70006000 0x40>;
- reg-shift = <2>;
- interrupts = < 0 36 0x04 >;
- };
-
- serial@70006040 {
- compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
- reg = <0x70006040 0x40>;
- reg-shift = <2>;
- interrupts = < 0 37 0x04 >;
- };
-
- serial@70006200 {
- compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
- reg = <0x70006200 0x100>;
- reg-shift = <2>;
- interrupts = < 0 46 0x04 >;
- };
-
- serial@70006300 {
- compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
- reg = <0x70006300 0x100>;
- reg-shift = <2>;
- interrupts = < 0 90 0x04 >;
- };
-
- serial@70006400 {
- compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
- reg = <0x70006400 0x100>;
- reg-shift = <2>;
- interrupts = < 0 91 0x04 >;
- };
-
- sdhci@78000000 {
- compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
- reg = <0x78000000 0x200>;
- interrupts = < 0 14 0x04 >;
- };
-
- sdhci@78000200 {
- compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
- reg = <0x78000200 0x200>;
- interrupts = < 0 15 0x04 >;
- };
-
- sdhci@78000400 {
- compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
- reg = <0x78000400 0x200>;
- interrupts = < 0 19 0x04 >;
- };
-
- sdhci@78000600 {
- compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
- reg = <0x78000600 0x200>;
- interrupts = < 0 31 0x04 >;
- };
-
- pinmux: pinmux@70000000 {
- compatible = "nvidia,tegra30-pinmux";
- reg = < 0x70000868 0xd0 /* Pad control registers */
- 0x70003000 0x3e0 >; /* Mux registers */
- };
};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 09a0296..ebda45b 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -33,6 +33,7 @@
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
CONFIG_MACH_IMX27IPCAM=y
+CONFIG_MACH_IMX27_DT=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index dc6f641..12617f7 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -64,6 +64,12 @@
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
# CONFIG_STANDALONE is not set
CONFIG_CONNECTOR=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 1ebbf45..5406c23 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -22,6 +22,7 @@
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
+CONFIG_MACH_MXS_DT=y
CONFIG_MACH_MX23EVK=y
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
new file mode 100644
index 0000000..c328ac6
--- /dev/null
+++ b/arch/arm/configs/prima2_defconfig
@@ -0,0 +1,69 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_ARCH_PRIMA2=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_KEXEC=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_SIRFSOC=y
+CONFIG_SERIAL_SIRFSOC_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SIRF=y
+CONFIG_SPI=y
+CONFIG_SPI_SIRF=y
+CONFIG_SPI_SPIDEV=y
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_DMADEVICES=y
+CONFIG_DMADEVICES_DEBUG=y
+CONFIG_DMADEVICES_VDEBUG=y
+CONFIG_SIRF_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_INFO=y
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
new file mode 100644
index 0000000..1fdb826
--- /dev/null
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_PATA_ARASAN_CF=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MPCORE_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_DMATEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index 7ed4291..865980c 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -14,6 +14,9 @@
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
@@ -73,6 +76,7 @@
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index cf94bc7..a2a1265 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -8,11 +8,13 @@
CONFIG_PARTITION_ADVANCED=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_DT=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
@@ -64,6 +66,7 @@
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 351d670..1198dd6 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -45,6 +45,7 @@
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -91,6 +92,8 @@
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MPU3050=y
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
@@ -103,12 +106,15 @@
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_TEGRA=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_SBS=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_SOUND=y
CONFIG_SND=y
@@ -133,16 +139,19 @@
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_STAGING=y
-CONFIG_IIO=y
CONFIG_SENSORS_ISL29018=y
+CONFIG_SENSORS_ISL29028=y
CONFIG_SENSORS_AK8975=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_MEMORY=y
+CONFIG_IIO=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index d7692ca..0b1c94b 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -43,6 +43,7 @@
void (*init_irq)(void);
struct sys_timer *timer; /* system tick timer */
void (*init_machine)(void);
+ void (*init_late)(void);
#ifdef CONFIG_MULTI_IRQ_HANDLER
void (*handle_irq)(struct pt_regs *);
#endif
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1b3096d..e15d83b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -801,6 +801,14 @@
}
arch_initcall(customize_machine);
+static int __init init_machine_late(void)
+{
+ if (machine_desc->init_late)
+ machine_desc->init_late();
+ return 0;
+}
+late_initcall(init_machine_late);
+
#ifdef CONFIG_KEXEC
static inline unsigned long long get_total_mem(void)
{
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index dc1afe5..0031864 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -681,6 +681,7 @@
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = da830_evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 09f6107..0149fb4 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1411,6 +1411,7 @@
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = da850_evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 82ed753..1c7b1f4 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -357,6 +357,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = dm355_evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index d74a8b3..8e77032 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -276,6 +276,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = dm355_leopard_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 5bce2b8..688a9c5 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -618,6 +618,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = dm365_evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3683306..d34ed559 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -825,6 +825,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index d72ab94..958679a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -788,6 +788,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
@@ -798,6 +799,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = evm_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 672d820..beecde3 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -572,6 +572,7 @@
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = mityomapl138_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index a772bb4..5de69f2 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -278,6 +278,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_ntosd2_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 45e8157..dc1208e 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -343,6 +343,7 @@
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = omapl138_hawk_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 76e67509..9078acf 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -157,6 +157,7 @@
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_sffsdr_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 5f14e30..ac4e003 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -282,6 +282,7 @@
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = tnetv107x_evm_board_init,
+ .init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = tnetv107x_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 008772e..34668ea 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -213,7 +213,7 @@
/*
* Disable any unused clocks left on by the bootloader
*/
-static int __init clk_disable_unused(void)
+int __init davinci_clk_disable_unused(void)
{
struct clk *ck;
@@ -237,7 +237,6 @@
return 0;
}
-late_initcall(clk_disable_unused);
#endif
static unsigned long clk_sysclk_recalc(struct clk *clk)
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index cb9b2e4..64b0f65 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -117,3 +117,10 @@
err:
panic("davinci_common_init: SoC Initialization failed\n");
}
+
+void __init davinci_init_late(void)
+{
+ davinci_cpufreq_init();
+ davinci_pm_init();
+ davinci_clk_disable_unused();
+}
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 031048f..4729eaa 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -240,10 +240,9 @@
.remove = __exit_p(davinci_cpufreq_remove),
};
-static int __init davinci_cpufreq_init(void)
+int __init davinci_cpufreq_init(void)
{
return platform_driver_probe(&davinci_cpufreq_driver,
davinci_cpufreq_probe);
}
-late_initcall(davinci_cpufreq_init);
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 95ce019..a685e97 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -353,9 +353,10 @@
*****************************************************************************/
static irqreturn_t dma_irq_handler(int irq, void *data)
{
- int i;
int ctlr;
- unsigned int cnt = 0;
+ u32 sh_ier;
+ u32 sh_ipr;
+ u32 bank;
ctlr = irq2ctlr(irq);
if (ctlr < 0)
@@ -363,41 +364,39 @@
dev_dbg(data, "dma_irq_handler\n");
- if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) &&
- (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
- return IRQ_NONE;
-
- while (1) {
- int j;
- if (edma_shadow0_read_array(ctlr, SH_IPR, 0) &
- edma_shadow0_read_array(ctlr, SH_IER, 0))
- j = 0;
- else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) &
- edma_shadow0_read_array(ctlr, SH_IER, 1))
- j = 1;
- else
- break;
- dev_dbg(data, "IPR%d %08x\n", j,
- edma_shadow0_read_array(ctlr, SH_IPR, j));
- for (i = 0; i < 32; i++) {
- int k = (j << 5) + i;
- if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i))
- && (edma_shadow0_read_array(ctlr,
- SH_IER, j) & BIT(i))) {
- /* Clear the corresponding IPR bits */
- edma_shadow0_write_array(ctlr, SH_ICR, j,
- BIT(i));
- if (edma_cc[ctlr]->intr_data[k].callback)
- edma_cc[ctlr]->intr_data[k].callback(
- k, DMA_COMPLETE,
- edma_cc[ctlr]->intr_data[k].
- data);
- }
- }
- cnt++;
- if (cnt > 10)
- break;
+ sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
+ if (!sh_ipr) {
+ sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
+ if (!sh_ipr)
+ return IRQ_NONE;
+ sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
+ bank = 1;
+ } else {
+ sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
+ bank = 0;
}
+
+ do {
+ u32 slot;
+ u32 channel;
+
+ dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
+
+ slot = __ffs(sh_ipr);
+ sh_ipr &= ~(BIT(slot));
+
+ if (sh_ier & BIT(slot)) {
+ channel = (bank << 5) | slot;
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(ctlr, SH_ICR, bank,
+ BIT(slot));
+ if (edma_cc[ctlr]->intr_data[channel].callback)
+ edma_cc[ctlr]->intr_data[channel].callback(
+ channel, DMA_COMPLETE,
+ edma_cc[ctlr]->intr_data[channel].data);
+ }
+ } while (sh_ipr);
+
edma_shadow0_write(ctlr, SH_IEVAL, 1);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 5cd39a4..bdc4aa8 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -84,6 +84,25 @@
extern void davinci_common_init(struct davinci_soc_info *soc_info);
extern void davinci_init_ide(void);
void davinci_restart(char mode, const char *cmd);
+void davinci_init_late(void);
+
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+int davinci_clk_disable_unused(void);
+#else
+static inline int davinci_clk_disable_unused(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+int davinci_cpufreq_init(void);
+#else
+static inline int davinci_cpufreq_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_SUSPEND
+int davinci_pm_init(void);
+#else
+static inline int davinci_pm_init(void) { return 0; }
+#endif
/* standard place to map on-chip SRAMs; they *may* support DMA */
#define SRAM_VIRT 0xfffe0000
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index cf94552..34290d1 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -22,46 +22,28 @@
#define UART_SHIFT 2
- .pushsection .data
-davinci_uart_phys: .word 0
-davinci_uart_virt: .word 0
- .popsection
+#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
+#define UART_BASE DAVINCI_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
+#define UART_BASE DA8XX_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
+#define UART_BASE DA8XX_UART1_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
+#define UART_BASE DA8XX_UART2_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
+#define UART_BASE TNETV107X_UART2_BASE
+#define UART_VIRTBASE TNETV107X_UART2_VIRT
+#else
+#error "Select a specifc port for DEBUG_LL"
+#endif
+
+#ifndef UART_VIRTBASE
+#define UART_VIRTBASE IO_ADDRESS(UART_BASE)
+#endif
.macro addruart, rp, rv, tmp
-
- /* Use davinci_uart_phys/virt if already configured */
-10: adr \rp, 99f @ get effective addr of 99f
- ldr \rv, [\rp] @ get absolute addr of 99f
- sub \rv, \rv, \rp @ offset between the two
- ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
- sub \tmp, \rp, \rv @ make it effective
- ldr \rp, [\tmp, #0] @ davinci_uart_phys
- ldr \rv, [\tmp, #4] @ davinci_uart_virt
- cmp \rp, #0 @ is port configured?
- cmpne \rv, #0
- bne 100f @ already configured
-
- /* Check the debug UART address set in uncompress.h */
- and \rp, pc, #0xff000000
- ldr \rv, =DAVINCI_UART_INFO_OFS
- add \rp, \rp, \rv
-
- /* Copy uart phys address from decompressor uart info */
- ldr \rv, [\rp, #0]
- str \rv, [\tmp, #0]
-
- /* Copy uart virt address from decompressor uart info */
- ldr \rv, [\rp, #4]
- str \rv, [\tmp, #4]
-
- b 10b
-
- .align
-99: .word .
- .word davinci_uart_phys
- .ltorg
-
-100:
+ ldr \rp, =UART_BASE
+ ldr \rv, =UART_VIRTBASE
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 2184691..16bb422 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -22,7 +22,7 @@
/*
* I/O mapping
*/
-#define IO_PHYS 0x01c00000UL
+#define IO_PHYS UL(0x01c00000)
#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
#define IO_SIZE 0x00400000
#define IO_VIRT (IO_PHYS + IO_OFFSET)
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index e347d88..46b3cd1 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -15,16 +15,6 @@
#include <mach/hardware.h>
-/*
- * Stolen area that contains debug uart physical and virtual addresses. These
- * addresses are filled in by the uncompress.h code, and are used by the debug
- * macros in debug-macro.S.
- *
- * This area sits just below the page tables (see arch/arm/kernel/head.S).
- * We define it as a relative offset from start of usable RAM.
- */
-#define DAVINCI_UART_INFO_OFS 0x3ff8
-
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index da2fb2c..18cfd49 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,37 +43,27 @@
barrier();
}
-static inline void set_uart_info(u32 phys, void * __iomem virt)
+static inline void set_uart_info(u32 phys)
{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
-
uart = (u32 *)phys;
- uart_info[0] = phys;
- uart_info[1] = (u32)virt;
}
-#define _DEBUG_LL_ENTRY(machine, phys, virt) \
- if (machine_is_##machine()) { \
- set_uart_info(phys, virt); \
- break; \
+#define _DEBUG_LL_ENTRY(machine, phys) \
+ { \
+ if (machine_is_##machine()) { \
+ set_uart_info(phys); \
+ break; \
+ } \
}
#define DEBUG_LL_DAVINCI(machine, port) \
- _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \
- IO_ADDRESS(DAVINCI_UART##port##_BASE))
+ _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
#define DEBUG_LL_DA8XX(machine, port) \
- _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \
- IO_ADDRESS(DA8XX_UART##port##_BASE))
+ _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
#define DEBUG_LL_TNETV107X(machine, port) \
- _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \
- TNETV107X_UART##port##_VIRT)
+ _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 04c49f7..eb8360b 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -152,8 +152,7 @@
.remove = __exit_p(davinci_pm_remove),
};
-static int __init davinci_pm_init(void)
+int __init davinci_pm_init(void)
{
return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
}
-late_initcall(davinci_pm_init);
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 42ab1e7..9493076 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
#include <asm/page.h>
@@ -68,6 +68,19 @@
}
/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+ tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+ get_tclk());
+
+ orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
* EHCI0
****************************************************************************/
void __init dove_ehci0_init(void)
@@ -89,8 +102,7 @@
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data,
- DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
- 0, get_tclk());
+ DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0);
}
/*****************************************************************************
@@ -116,7 +128,7 @@
void __init dove_uart0_init(void)
{
orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE,
- IRQ_DOVE_UART_0, get_tclk());
+ IRQ_DOVE_UART_0, tclk);
}
/*****************************************************************************
@@ -125,7 +137,7 @@
void __init dove_uart1_init(void)
{
orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE,
- IRQ_DOVE_UART_1, get_tclk());
+ IRQ_DOVE_UART_1, tclk);
}
/*****************************************************************************
@@ -134,7 +146,7 @@
void __init dove_uart2_init(void)
{
orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE,
- IRQ_DOVE_UART_2, get_tclk());
+ IRQ_DOVE_UART_2, tclk);
}
/*****************************************************************************
@@ -143,7 +155,7 @@
void __init dove_uart3_init(void)
{
orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE,
- IRQ_DOVE_UART_3, get_tclk());
+ IRQ_DOVE_UART_3, tclk);
}
/*****************************************************************************
@@ -151,12 +163,12 @@
****************************************************************************/
void __init dove_spi0_init(void)
{
- orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
+ orion_spi_init(DOVE_SPI0_PHYS_BASE);
}
void __init dove_spi1_init(void)
{
- orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+ orion_spi_1_init(DOVE_SPI1_PHYS_BASE);
}
/*****************************************************************************
@@ -272,18 +284,17 @@
void __init dove_init(void)
{
- int tclk;
-
- tclk = get_tclk();
-
printk(KERN_INFO "Dove 88AP510 SoC, ");
- printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+ printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init();
#endif
dove_setup_cpu_mbus();
+ /* Setup root of clk tree */
+ clk_init();
+
/* internal devices that every board has */
dove_rtc_init();
dove_xor0_init();
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index ea77ae4..bc2867f 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/spi/flash.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 2d45947..a472777 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -41,5 +41,6 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = adssphere_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 66b1494..4dd07a0 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -675,7 +675,7 @@
fail_gpio_d:
gpio_free(EP93XX_GPIO_LINE_C(i));
fail_gpio_c:
- for ( ; i >= 0; --i) {
+ for (--i; i >= 0; --i) {
gpio_free(EP93XX_GPIO_LINE_C(i));
gpio_free(EP93XX_GPIO_LINE_D(i));
}
@@ -834,3 +834,8 @@
while (1)
;
}
+
+void __init ep93xx_init_late(void)
+{
+ crunch_init();
+}
diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c
index 74753e2..a4a2ab9 100644
--- a/arch/arm/mach-ep93xx/crunch.c
+++ b/arch/arm/mach-ep93xx/crunch.c
@@ -79,12 +79,10 @@
.notifier_call = crunch_do,
};
-static int __init crunch_init(void)
+int __init crunch_init(void)
{
thread_register_notifier(&crunch_notifier_block);
elf_hwcap |= HWCAP_CRUNCH;
return 0;
}
-
-late_initcall(crunch_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index da9047d..d74c5cd 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -255,6 +255,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -268,6 +269,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -281,6 +283,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -294,6 +297,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -307,6 +311,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -320,6 +325,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -333,6 +339,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -346,6 +353,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index fcdffbe49..437c341 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -41,5 +41,6 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = gesbc9312_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 602bd87..1ecb040 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -53,5 +53,12 @@
extern struct sys_timer ep93xx_timer;
void ep93xx_restart(char, const char *);
+void ep93xx_init_late(void);
+
+#ifdef CONFIG_CRUNCH
+int crunch_init(void);
+#else
+static inline int crunch_init(void) { return 0; }
+#endif
#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index dc431c5..3d7cdab 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -85,6 +85,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -98,6 +99,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -111,6 +113,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
@@ -124,6 +127,7 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index f40c298..33dc079 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -86,5 +86,6 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = simone_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 0c00852..eb28237 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -183,5 +183,6 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = snappercl15_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 5ea7909..d4ef339 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -252,5 +252,6 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = ts72xx_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index ba156eb..2905a49 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -367,5 +367,6 @@
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
+ .init_late = ep93xx_init_late,
.restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 15b05b8..43ebe90 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -61,6 +61,7 @@
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
+ select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
@@ -70,7 +71,7 @@
help
Use MCT (Multi Core Timer) as kernel timers
-config EXYNOS4_DEV_DMA
+config EXYNOS_DEV_DMA
bool
help
Compile in amba device definitions for DMA controller
@@ -80,15 +81,20 @@
help
Compile in platform device definitions for AHCI
+config EXYNOS_DEV_DRM
+ bool
+ help
+ Compile in platform device definitions for core DRM device
+
config EXYNOS4_SETUP_FIMD0
bool
help
Common setup code for FIMD0.
-config EXYNOS4_DEV_SYSMMU
+config EXYNOS_DEV_SYSMMU
bool
help
- Common setup code for SYSTEM MMU in EXYNOS4
+ Common setup code for SYSTEM MMU in EXYNOS platforms
config EXYNOS4_DEV_DWMCI
bool
@@ -161,7 +167,7 @@
help
Common setup code for USB PHY controller
-config EXYNOS4_SETUP_SPI
+config EXYNOS_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations.
@@ -201,12 +207,12 @@
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
@@ -224,8 +230,7 @@
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
- select EXYNOS4_DEV_DMA
- select EXYNOS4_DEV_SYSMMU
+ select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
@@ -256,6 +261,7 @@
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
@@ -332,6 +338,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
@@ -360,7 +367,8 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_SYSMMU
+ select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 8631840..440a637 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -50,10 +50,11 @@
obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
-obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
+obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
+obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o
+obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
@@ -68,4 +69,4 @@
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
-obj-$(CONFIG_EXYNOS4_SETUP_SPI) += setup-spi.o
+obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
index b9862e2..31bd181 100644
--- a/arch/arm/mach-exynos/Makefile.boot
+++ b/arch/arm/mach-exynos/Makefile.boot
@@ -1,2 +1,5 @@
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
+
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 6efd1e5..bcb7db4 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -168,7 +168,7 @@
return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
}
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
}
@@ -198,6 +198,11 @@
return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
}
+int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
+}
+
static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
@@ -678,61 +683,55 @@
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 14),
}, {
- .name = "SYSMMU_MDMA",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "SYSMMU_FIMC0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "SYSMMU_FIMC1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "SYSMMU_FIMC2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "SYSMMU_FIMC3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "SYSMMU_JPEG",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "SYSMMU_FIMD0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_FIMD1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_PCIe",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "SYSMMU_G2D",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "SYSMMU_ROTATOR",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_TV",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_MFC_L",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
.enable = exynos4_clk_ip_mfc_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "SYSMMU_MFC_R",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1),
.enable = exynos4_clk_ip_mfc_ctrl,
.ctrlbit = (1 << 2),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(tv, 2),
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3),
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(rot, 4),
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc0, 5),
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc1, 6),
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc2, 7),
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc3, 8),
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimd0, 10),
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 4),
}
};
diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h
index cb71c29..28a1197 100644
--- a/arch/arm/mach-exynos/clock-exynos4.h
+++ b/arch/arm/mach-exynos/clock-exynos4.h
@@ -26,5 +26,7 @@
extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index 3b131e4..b8689ff 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -26,6 +26,7 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
#include "common.h"
#include "clock-exynos4.h"
@@ -94,6 +95,16 @@
.devname = "exynos4-fb.1",
.enable = exynos4_clk_ip_lcd1_ctrl,
.ctrlbit = (1 << 0),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(2d, 14),
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11),
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 4),
},
};
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 3ecc01e..da397d2 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -26,6 +26,7 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
#include "common.h"
#include "clock-exynos4.h"
@@ -39,6 +40,16 @@
};
#endif
+static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
+}
+
+static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
+}
+
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
[1] = &exynos4_clk_mout_mpll.clk,
@@ -66,7 +77,32 @@
};
static struct clk init_clocks_off[] = {
- /* nothing here yet */
+ {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(2d, 14),
+ .enable = exynos4_clk_ip_dmc_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = exynos4212_clk_ip_isp0_ctrl,
+ .ctrlbit = (7 << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME2,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = exynos4212_clk_ip_isp1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "flite",
+ .devname = "exynos-fimc-lite.0",
+ .enable = exynos4212_clk_ip_isp0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "flite",
+ .devname = "exynos-fimc-lite.1",
+ .enable = exynos4212_clk_ip_isp0_ctrl,
+ .ctrlbit = (1 << 3),
+ }
};
#ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 7ac6ff4..5aa460b 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -82,6 +82,11 @@
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
}
+static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
+}
+
static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
@@ -127,6 +132,21 @@
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
}
+static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
+}
+
+static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
+}
+
+static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk exynos5_clk_mout_apll = {
@@ -145,11 +165,29 @@
.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
};
+static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
+ .clk = {
+ .name = "mout_bpll_fout",
+ },
+ .sources = &clk_src_bpll_fout,
+ .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_list[] = {
+ [0] = &clk_fin_bpll,
+ [1] = &exynos5_clk_mout_bpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll = {
+ .sources = exynos5_clk_src_bpll_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list),
+};
+
static struct clksrc_clk exynos5_clk_mout_bpll = {
.clk = {
.name = "mout_bpll",
},
- .sources = &clk_src_bpll,
+ .sources = &exynos5_clk_src_bpll,
.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
};
@@ -187,11 +225,29 @@
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
};
+static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
+ .clk = {
+ .name = "mout_mpll_fout",
+ },
+ .sources = &clk_src_mpll_fout,
+ .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_mpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll = {
+ .sources = exynos5_clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
+};
+
struct clksrc_clk exynos5_clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
- .sources = &clk_src_mpll,
+ .sources = &exynos5_clk_src_mpll,
.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
};
@@ -454,6 +510,11 @@
.enable = exynos5_clk_ip_peris_ctrl,
.ctrlbit = (1 << 20),
}, {
+ .name = "watchdog",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peris_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
.name = "hsmmc",
.devname = "exynos4-sdhci.0",
.parent = &exynos5_clk_aclk_200.clk,
@@ -630,6 +691,76 @@
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 14),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
+ .enable = &exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1),
+ .enable = &exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(tv, 2),
+ .enable = &exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 9)
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3),
+ .enable = &exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(rot, 4),
+ .enable = &exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 6)
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc0, 5),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc1, 6),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc2, 7),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc3, 8),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = &exynos5_clk_ip_isp0_ctrl,
+ .ctrlbit = (0x3F << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME2,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = &exynos5_clk_ip_isp1_ctrl,
+ .ctrlbit = (0xF << 4),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(camif0, 12),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(camif1, 13),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(2d, 14),
+ .enable = &exynos5_clk_ip_acp_ctrl,
+ .ctrlbit = (1 << 7)
}
};
@@ -941,10 +1072,12 @@
&exynos5_clk_mout_apll,
&exynos5_clk_sclk_apll,
&exynos5_clk_mout_bpll,
+ &exynos5_clk_mout_bpll_fout,
&exynos5_clk_mout_bpll_user,
&exynos5_clk_mout_cpll,
&exynos5_clk_mout_epll,
&exynos5_clk_mout_mpll,
+ &exynos5_clk_mout_mpll_fout,
&exynos5_clk_mout_mpll_user,
&exynos5_clk_vpllsrc,
&exynos5_clk_sclk_vpll,
@@ -1008,7 +1141,9 @@
&exynos5_clk_sclk_hdmi27m,
&exynos5_clk_sclk_hdmiphy,
&clk_fout_bpll,
+ &clk_fout_bpll_div2,
&clk_fout_cpll,
+ &clk_fout_mpll_div2,
&exynos5_clk_armclk,
};
@@ -1173,8 +1308,10 @@
clk_fout_apll.ops = &exynos5_fout_apll_ops;
clk_fout_bpll.rate = bpll;
+ clk_fout_bpll_div2.rate = bpll >> 1;
clk_fout_cpll.rate = cpll;
clk_fout_mpll.rate = mpll;
+ clk_fout_mpll_div2.rate = mpll >> 1;
clk_fout_epll.rate = epll;
clk_fout_vpll.rate = vpll;
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 5ccd6e8..742edd3 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -19,6 +19,9 @@
#include <linux/serial_core.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/export.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
@@ -265,12 +268,12 @@
}, {
.virtual = (unsigned long)S5P_VA_GIC_CPU,
.pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
- .length = SZ_64K,
+ .length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GIC_DIST,
.pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
- .length = SZ_64K,
+ .length = SZ_4K,
.type = MT_DEVICE,
},
};
@@ -285,6 +288,11 @@
__raw_writel(0x1, EXYNOS_SWRESET);
}
+void __init exynos_init_late(void)
+{
+ exynos_pm_late_initcall();
+}
+
/*
* exynos_map_io
*
@@ -399,6 +407,7 @@
void __iomem *base;
};
+static struct irq_domain *combiner_irq_domain;
static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
static inline void __iomem *combiner_base(struct irq_data *data)
@@ -411,14 +420,14 @@
static void combiner_mask_irq(struct irq_data *data)
{
- u32 mask = 1 << (data->irq % 32);
+ u32 mask = 1 << (data->hwirq % 32);
__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
}
static void combiner_unmask_irq(struct irq_data *data)
{
- u32 mask = 1 << (data->irq % 32);
+ u32 mask = 1 << (data->hwirq % 32);
__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
}
@@ -474,49 +483,131 @@
irq_set_chained_handler(irq, combiner_handle_cascade_irq);
}
-static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start)
+static void __init combiner_init_one(unsigned int combiner_nr,
+ void __iomem *base)
{
- unsigned int i;
- unsigned int max_nr;
-
- if (soc_is_exynos5250())
- max_nr = EXYNOS5_MAX_COMBINER_NR;
- else
- max_nr = EXYNOS4_MAX_COMBINER_NR;
-
- if (combiner_nr >= max_nr)
- BUG();
-
combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_start;
+ combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+ combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
/* Disable all interrupts */
-
__raw_writel(combiner_data[combiner_nr].irq_mask,
base + COMBINER_ENABLE_CLEAR);
+}
- /* Setup the Linux IRQ subsystem */
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
- for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
- + MAX_IRQ_IN_COMBINER; i++) {
- irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
- irq_set_chip_data(i, &combiner_data[combiner_nr]);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ if (intsize < 2)
+ return -EINVAL;
+
+ *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+ *out_type = 0;
+
+ return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+ irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+ .xlate = combiner_irq_domain_xlate,
+ .map = combiner_irq_domain_map,
+};
+
+void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
+{
+ int i, irq, irq_base;
+ unsigned int max_nr, nr_irq;
+
+ if (np) {
+ if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+ pr_warning("%s: number of combiners not specified, "
+ "setting default as %d.\n",
+ __func__, EXYNOS4_MAX_COMBINER_NR);
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+ }
+ } else {
+ max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+ EXYNOS4_MAX_COMBINER_NR;
+ }
+ nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+ irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+ if (IS_ERR_VALUE(irq_base)) {
+ irq_base = COMBINER_IRQ(0, 0);
+ pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+ }
+
+ combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+ &combiner_irq_domain_ops, &combiner_data);
+ if (WARN_ON(!combiner_irq_domain)) {
+ pr_warning("%s: irq domain init failed\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < max_nr; i++) {
+ combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+ irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+ if (np)
+ irq = irq_of_parse_and_map(np, i);
+#endif
+ combiner_cascade_irq(i, irq);
}
}
#ifdef CONFIG_OF
+int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+{
+ void __iomem *combiner_base;
+
+ combiner_base = of_iomap(np, 0);
+ if (!combiner_base) {
+ pr_err("%s: failed to map combiner registers\n", __func__);
+ return -ENXIO;
+ }
+
+ combiner_init(combiner_base, np);
+
+ return 0;
+}
+
static const struct of_device_id exynos4_dt_irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "samsung,exynos4210-combiner",
+ .data = combiner_of_init, },
{},
};
#endif
void __init exynos4_init_irq(void)
{
- int irq;
unsigned int gic_bank_offset;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
@@ -528,12 +619,8 @@
of_irq_init(exynos4_dt_irq_match);
#endif
- for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
-
- combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
- COMBINER_IRQ(irq, 0));
- combiner_cascade_irq(irq, IRQ_SPI(irq));
- }
+ if (!of_have_populated_dt())
+ combiner_init(S5P_VA_COMBINER_BASE, NULL);
/*
* The parameters of s5p_init_irq() are for VIC init.
@@ -545,18 +632,9 @@
void __init exynos5_init_irq(void)
{
- int irq;
-
#ifdef CONFIG_OF
of_irq_init(exynos4_dt_irq_match);
#endif
-
- for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
- combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
- COMBINER_IRQ(irq, 0));
- combiner_cascade_irq(irq, IRQ_SPI(irq));
- }
-
/*
* The parameters of s5p_init_irq() are for VIC init.
* Theses parameters should be NULL and 0 because EXYNOS4
@@ -565,30 +643,18 @@
s5p_init_irq(NULL, 0);
}
-struct bus_type exynos4_subsys = {
- .name = "exynos4-core",
- .dev_name = "exynos4-core",
-};
-
-struct bus_type exynos5_subsys = {
- .name = "exynos5-core",
- .dev_name = "exynos5-core",
+struct bus_type exynos_subsys = {
+ .name = "exynos-core",
+ .dev_name = "exynos-core",
};
static struct device exynos4_dev = {
- .bus = &exynos4_subsys,
-};
-
-static struct device exynos5_dev = {
- .bus = &exynos5_subsys,
+ .bus = &exynos_subsys,
};
static int __init exynos_core_init(void)
{
- if (soc_is_exynos5250())
- return subsys_system_register(&exynos5_subsys, NULL);
- else
- return subsys_system_register(&exynos4_subsys, NULL);
+ return subsys_system_register(&exynos_subsys, NULL);
}
core_initcall(exynos_core_init);
@@ -675,10 +741,7 @@
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
- if (soc_is_exynos5250())
- return device_register(&exynos5_dev);
- else
- return device_register(&exynos4_dev);
+ return device_register(&exynos4_dev);
}
/* uart registration process */
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 677b546..aed2eeb 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -19,6 +19,13 @@
void exynos5_init_irq(void);
void exynos4_restart(char mode, const char *cmd);
void exynos5_restart(char mode, const char *cmd);
+void exynos_init_late(void);
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+int exynos_pm_late_initcall(void);
+#else
+static int exynos_pm_late_initcall(void) { return 0; }
+#endif
#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c
new file mode 100644
index 0000000..17c9c6e
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-drm.c
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/arm/mach-exynos/dev-drm.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - core DRM device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos_device_drm = {
+ .name = "exynos-drm",
+ .dev = {
+ .dma_mask = &exynos_drm_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
diff --git a/arch/arm/mach-exynos/dev-sysmmu.c b/arch/arm/mach-exynos/dev-sysmmu.c
index 781563f..c5b1ea3 100644
--- a/arch/arm/mach-exynos/dev-sysmmu.c
+++ b/arch/arm/mach-exynos/dev-sysmmu.c
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
+/* linux/arch/arm/mach-exynos/dev-sysmmu.c
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - System MMU support
+ * EXYNOS - System MMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,222 +12,263 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/export.h>
+
+#include <plat/cpu.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/sysmmu.h>
-#include <plat/s5p-clock.h>
-/* These names must be equal to the clock names in mach-exynos4/clock.c */
-const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
- "SYSMMU_MDMA" ,
- "SYSMMU_SSS" ,
- "SYSMMU_FIMC0" ,
- "SYSMMU_FIMC1" ,
- "SYSMMU_FIMC2" ,
- "SYSMMU_FIMC3" ,
- "SYSMMU_JPEG" ,
- "SYSMMU_FIMD0" ,
- "SYSMMU_FIMD1" ,
- "SYSMMU_PCIe" ,
- "SYSMMU_G2D" ,
- "SYSMMU_ROTATOR",
- "SYSMMU_MDMA2" ,
- "SYSMMU_TV" ,
- "SYSMMU_MFC_L" ,
- "SYSMMU_MFC_R" ,
-};
+static u64 exynos_sysmmu_dma_mask = DMA_BIT_MASK(32);
-static struct resource exynos4_sysmmu_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA,
- .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SYSMMU_MDMA0_0,
- .end = IRQ_SYSMMU_MDMA0_0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = EXYNOS4_PA_SYSMMU_SSS,
- .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [3] = {
- .start = IRQ_SYSMMU_SSS_0,
- .end = IRQ_SYSMMU_SSS_0,
- .flags = IORESOURCE_IRQ,
- },
- [4] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC0,
- .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [5] = {
- .start = IRQ_SYSMMU_FIMC0_0,
- .end = IRQ_SYSMMU_FIMC0_0,
- .flags = IORESOURCE_IRQ,
- },
- [6] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC1,
- .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [7] = {
- .start = IRQ_SYSMMU_FIMC1_0,
- .end = IRQ_SYSMMU_FIMC1_0,
- .flags = IORESOURCE_IRQ,
- },
- [8] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC2,
- .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [9] = {
- .start = IRQ_SYSMMU_FIMC2_0,
- .end = IRQ_SYSMMU_FIMC2_0,
- .flags = IORESOURCE_IRQ,
- },
- [10] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC3,
- .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [11] = {
- .start = IRQ_SYSMMU_FIMC3_0,
- .end = IRQ_SYSMMU_FIMC3_0,
- .flags = IORESOURCE_IRQ,
- },
- [12] = {
- .start = EXYNOS4_PA_SYSMMU_JPEG,
- .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [13] = {
- .start = IRQ_SYSMMU_JPEG_0,
- .end = IRQ_SYSMMU_JPEG_0,
- .flags = IORESOURCE_IRQ,
- },
- [14] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD0,
- .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [15] = {
- .start = IRQ_SYSMMU_LCD0_M0_0,
- .end = IRQ_SYSMMU_LCD0_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [16] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD1,
- .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [17] = {
- .start = IRQ_SYSMMU_LCD1_M1_0,
- .end = IRQ_SYSMMU_LCD1_M1_0,
- .flags = IORESOURCE_IRQ,
- },
- [18] = {
- .start = EXYNOS4_PA_SYSMMU_PCIe,
- .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [19] = {
- .start = IRQ_SYSMMU_PCIE_0,
- .end = IRQ_SYSMMU_PCIE_0,
- .flags = IORESOURCE_IRQ,
- },
- [20] = {
- .start = EXYNOS4_PA_SYSMMU_G2D,
- .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [21] = {
- .start = IRQ_SYSMMU_2D_0,
- .end = IRQ_SYSMMU_2D_0,
- .flags = IORESOURCE_IRQ,
- },
- [22] = {
- .start = EXYNOS4_PA_SYSMMU_ROTATOR,
- .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [23] = {
- .start = IRQ_SYSMMU_ROTATOR_0,
- .end = IRQ_SYSMMU_ROTATOR_0,
- .flags = IORESOURCE_IRQ,
- },
- [24] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA2,
- .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [25] = {
- .start = IRQ_SYSMMU_MDMA1_0,
- .end = IRQ_SYSMMU_MDMA1_0,
- .flags = IORESOURCE_IRQ,
- },
- [26] = {
- .start = EXYNOS4_PA_SYSMMU_TV,
- .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [27] = {
- .start = IRQ_SYSMMU_TV_M0_0,
- .end = IRQ_SYSMMU_TV_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [28] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_L,
- .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [29] = {
- .start = IRQ_SYSMMU_MFC_M0_0,
- .end = IRQ_SYSMMU_MFC_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [30] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_R,
- .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [31] = {
- .start = IRQ_SYSMMU_MFC_M1_0,
- .end = IRQ_SYSMMU_MFC_M1_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device exynos4_device_sysmmu = {
- .name = "s5p-sysmmu",
- .id = 32,
- .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource),
- .resource = exynos4_sysmmu_resource,
-};
-EXPORT_SYMBOL(exynos4_device_sysmmu);
-
-static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
-{
- sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
- if (IS_ERR(sysmmu_clk[ips]))
- sysmmu_clk[ips] = NULL;
- else
- clk_put(sysmmu_clk[ips]);
+#define SYSMMU_PLATFORM_DEVICE(ipname, devid) \
+static struct sysmmu_platform_data platdata_##ipname = { \
+ .dbgname = #ipname, \
+}; \
+struct platform_device SYSMMU_PLATDEV(ipname) = \
+{ \
+ .name = SYSMMU_DEVNAME_BASE, \
+ .id = devid, \
+ .dev = { \
+ .dma_mask = &exynos_sysmmu_dma_mask, \
+ .coherent_dma_mask = DMA_BIT_MASK(32), \
+ .platform_data = &platdata_##ipname, \
+ }, \
}
-void sysmmu_clk_enable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_enable(sysmmu_clk[ips]);
+SYSMMU_PLATFORM_DEVICE(mfc_l, 0);
+SYSMMU_PLATFORM_DEVICE(mfc_r, 1);
+SYSMMU_PLATFORM_DEVICE(tv, 2);
+SYSMMU_PLATFORM_DEVICE(jpeg, 3);
+SYSMMU_PLATFORM_DEVICE(rot, 4);
+SYSMMU_PLATFORM_DEVICE(fimc0, 5); /* fimc* and gsc* exist exclusively */
+SYSMMU_PLATFORM_DEVICE(fimc1, 6);
+SYSMMU_PLATFORM_DEVICE(fimc2, 7);
+SYSMMU_PLATFORM_DEVICE(fimc3, 8);
+SYSMMU_PLATFORM_DEVICE(gsc0, 5);
+SYSMMU_PLATFORM_DEVICE(gsc1, 6);
+SYSMMU_PLATFORM_DEVICE(gsc2, 7);
+SYSMMU_PLATFORM_DEVICE(gsc3, 8);
+SYSMMU_PLATFORM_DEVICE(isp, 9);
+SYSMMU_PLATFORM_DEVICE(fimd0, 10);
+SYSMMU_PLATFORM_DEVICE(fimd1, 11);
+SYSMMU_PLATFORM_DEVICE(camif0, 12);
+SYSMMU_PLATFORM_DEVICE(camif1, 13);
+SYSMMU_PLATFORM_DEVICE(2d, 14);
+
+#define SYSMMU_RESOURCE_NAME(core, ipname) sysmmures_##core##_##ipname
+
+#define SYSMMU_RESOURCE(core, ipname) \
+ static struct resource SYSMMU_RESOURCE_NAME(core, ipname)[] __initdata =
+
+#define DEFINE_SYSMMU_RESOURCE(core, mem, irq) \
+ DEFINE_RES_MEM_NAMED(core##_PA_SYSMMU_##mem, SZ_4K, #mem), \
+ DEFINE_RES_IRQ_NAMED(core##_IRQ_SYSMMU_##irq##_0, #mem)
+
+#define SYSMMU_RESOURCE_DEFINE(core, ipname, mem, irq) \
+ SYSMMU_RESOURCE(core, ipname) { \
+ DEFINE_SYSMMU_RESOURCE(core, mem, irq) \
+ }
+
+struct sysmmu_resource_map {
+ struct platform_device *pdev;
+ struct resource *res;
+ u32 rnum;
+ struct device *pdd;
+ char *clocknames;
+};
+
+#define SYSMMU_RESOURCE_MAPPING(core, ipname, resname) { \
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME, \
}
-void sysmmu_clk_disable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_disable(sysmmu_clk[ips]);
+#define SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) { \
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \
}
+
+#ifdef CONFIG_EXYNOS_DEV_PD
+#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) { \
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME, \
+ .pdd = &exynos##core##_device_pd[pd].dev, \
+}
+
+#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) {\
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \
+ .pdd = &exynos##core##_device_pd[pd].dev, \
+}
+#else
+#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) \
+ SYSMMU_RESOURCE_MAPPING(core, ipname, resname)
+#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) \
+ SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata)
+
+#endif /* CONFIG_EXYNOS_DEV_PD */
+
+#ifdef CONFIG_ARCH_EXYNOS4
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc0, FIMC0, FIMC0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc1, FIMC1, FIMC1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc2, FIMC2, FIMC2);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc3, FIMC3, FIMC3);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, jpeg, JPEG, JPEG);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d, G2D, 2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, tv, TV, TV_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d_acp, 2D_ACP, 2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, rot, ROTATOR, ROTATOR);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd0, FIMD0, LCD0_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd1, FIMD1, LCD1_M1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite0, FIMC_LITE0, FIMC_LITE0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite1, FIMC_LITE1, FIMC_LITE1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_r, MFC_R, MFC_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_l, MFC_L, MFC_M1);
+SYSMMU_RESOURCE(EXYNOS4, isp) {
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_ISP, FIMC_ISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_DRC, FIMC_DRC),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_FD, FIMC_FD),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, ISPCPU, FIMC_CX),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc0, fimc0, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc1, fimc1, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc2, fimc2, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc3, fimc3, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, tv, tv, PD_TV),
+ SYSMMU_RESOURCE_MAPPING_PD(4, mfc_r, mfc_r, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_PD(4, mfc_l, mfc_l, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_PD(4, rot, rot, PD_LCD0),
+ SYSMMU_RESOURCE_MAPPING_PD(4, jpeg, jpeg, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimd0, fimd0, PD_LCD0),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4210[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING_PD(4, 2d, 2d, PD_LCD0),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimd1, fimd1, PD_LCD1),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4212[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING(4, 2d, 2d_acp),
+ SYSMMU_RESOURCE_MAPPING_PD(4, camif0, flite0, PD_ISP),
+ SYSMMU_RESOURCE_MAPPING_PD(4, camif1, flite1, PD_ISP),
+ SYSMMU_RESOURCE_MAPPING_PD(4, isp, isp, PD_ISP),
+};
+#endif /* CONFIG_ARCH_EXYNOS4 */
+
+#ifdef CONFIG_ARCH_EXYNOS5
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, jpeg, JPEG, JPEG);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, fimd1, FIMD1, FIMD1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, 2d, 2D, 2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, rot, ROTATOR, ROTATOR);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, tv, TV, TV);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite0, LITE0, LITE0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite1, LITE1, LITE1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc0, GSC0, GSC0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc1, GSC1, GSC1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc2, GSC2, GSC2);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc3, GSC3, GSC3);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_r, MFC_R, MFC_R);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_l, MFC_L, MFC_L);
+SYSMMU_RESOURCE(EXYNOS5, isp) {
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISP, ISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, DRC, DRC),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, FD, FD),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISPCPU, MCUISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERC, SCALERCISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERP, SCALERPISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, ODC, ODC),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS0, DIS0),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS1, DIS1),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, 3DNR, 3DNR),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap5[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING(5, jpeg, jpeg),
+ SYSMMU_RESOURCE_MAPPING(5, fimd1, fimd1),
+ SYSMMU_RESOURCE_MAPPING(5, 2d, 2d),
+ SYSMMU_RESOURCE_MAPPING(5, rot, rot),
+ SYSMMU_RESOURCE_MAPPING_PD(5, tv, tv, PD_DISP1),
+ SYSMMU_RESOURCE_MAPPING_PD(5, camif0, flite0, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, camif1, flite1, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc0, gsc0, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc1, gsc1, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc2, gsc2, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc3, gsc3, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, mfc_r, mfc_r, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_PD(5, mfc_l, mfc_l, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_MCPD(5, isp, isp, PD_ISP, mc_platdata),
+};
+#endif /* CONFIG_ARCH_EXYNOS5 */
+
+static int __init init_sysmmu_platform_device(void)
+{
+ int i, j;
+ struct sysmmu_resource_map *resmap[2] = {NULL, NULL};
+ int nmap[2] = {0, 0};
+
+#ifdef CONFIG_ARCH_EXYNOS5
+ if (soc_is_exynos5250()) {
+ resmap[0] = sysmmu_resmap5;
+ nmap[0] = ARRAY_SIZE(sysmmu_resmap5);
+ nmap[1] = 0;
+ }
+#endif
+
+#ifdef CONFIG_ARCH_EXYNOS4
+ if (resmap[0] == NULL) {
+ resmap[0] = sysmmu_resmap4;
+ nmap[0] = ARRAY_SIZE(sysmmu_resmap4);
+ }
+
+ if (soc_is_exynos4210()) {
+ resmap[1] = sysmmu_resmap4210;
+ nmap[1] = ARRAY_SIZE(sysmmu_resmap4210);
+ }
+
+ if (soc_is_exynos4412() || soc_is_exynos4212()) {
+ resmap[1] = sysmmu_resmap4212;
+ nmap[1] = ARRAY_SIZE(sysmmu_resmap4212);
+ }
+#endif
+
+ for (j = 0; j < 2; j++) {
+ for (i = 0; i < nmap[j]; i++) {
+ struct sysmmu_resource_map *map;
+ struct sysmmu_platform_data *platdata;
+
+ map = &resmap[j][i];
+
+ map->pdev->dev.parent = map->pdd;
+
+ platdata = map->pdev->dev.platform_data;
+ platdata->clockname = map->clocknames;
+
+ if (platform_device_add_resources(map->pdev, map->res,
+ map->rnum)) {
+ pr_err("%s: Failed to add device resources for "
+ "%s.%d\n", __func__,
+ map->pdev->name, map->pdev->id);
+ continue;
+ }
+
+ if (platform_device_register(map->pdev)) {
+ pr_err("%s: Failed to register %s.%d\n",
+ __func__, map->pdev->name,
+ map->pdev->id);
+ }
+ }
+ }
+
+ return 0;
+}
+arch_initcall(init_sysmmu_platform_device);
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 69aaa45..f60b66d 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -103,10 +103,45 @@
DMACH_MIPI_HSI5,
};
-struct dma_pl330_platdata exynos4_pdma0_pdata;
+static u8 exynos5250_pdma0_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_SLIMBUS0_RX,
+ DMACH_SLIMBUS0_TX,
+ DMACH_SLIMBUS2_RX,
+ DMACH_SLIMBUS2_TX,
+ DMACH_SLIMBUS4_RX,
+ DMACH_SLIMBUS4_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_MIPI_HSI0,
+ DMACH_MIPI_HSI2,
+ DMACH_MIPI_HSI4,
+ DMACH_MIPI_HSI6,
+};
-static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
- EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
+static struct dma_pl330_platdata exynos_pdma0_pdata;
+
+static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
+ EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
@@ -169,10 +204,45 @@
DMACH_MIPI_HSI7,
};
-static struct dma_pl330_platdata exynos4_pdma1_pdata;
+static u8 exynos5250_pdma1_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_PWM,
+ DMACH_SPDIF,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_SLIMBUS1_RX,
+ DMACH_SLIMBUS1_TX,
+ DMACH_SLIMBUS3_RX,
+ DMACH_SLIMBUS3_TX,
+ DMACH_SLIMBUS5_RX,
+ DMACH_SLIMBUS5_TX,
+ DMACH_SLIMBUS0AUX_RX,
+ DMACH_SLIMBUS0AUX_TX,
+ DMACH_DISP1,
+ DMACH_MIPI_HSI1,
+ DMACH_MIPI_HSI3,
+ DMACH_MIPI_HSI5,
+ DMACH_MIPI_HSI7,
+};
-static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
- EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
+static struct dma_pl330_platdata exynos_pdma1_pdata;
+
+static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330,
+ EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
static u8 mdma_peri[] = {
DMACH_MTOM_0,
@@ -185,46 +255,63 @@
DMACH_MTOM_7,
};
-static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+static struct dma_pl330_platdata exynos_mdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(mdma_peri),
.peri_id = mdma_peri,
};
-static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330,
- EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
+static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330,
+ EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
-static int __init exynos4_dma_init(void)
+static int __init exynos_dma_init(void)
{
if (of_have_populated_dt())
return 0;
if (soc_is_exynos4210()) {
- exynos4_pdma0_pdata.nr_valid_peri =
+ exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma0_peri);
- exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
- exynos4_pdma1_pdata.nr_valid_peri =
+ exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+ exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
- exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+ exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- exynos4_pdma0_pdata.nr_valid_peri =
+ exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
- exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
- exynos4_pdma1_pdata.nr_valid_peri =
+ exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+ exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma1_peri);
- exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+ exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+ } else if (soc_is_exynos5250()) {
+ exynos_pdma0_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos5250_pdma0_peri);
+ exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
+ exynos_pdma1_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos5250_pdma1_peri);
+ exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
+
+ exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
+ exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
+ exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
+ exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
+ exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
+ exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
+ exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
+ exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
+ exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
}
- dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
- amba_device_register(&exynos4_pdma0_device, &iomem_resource);
+ dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
+ amba_device_register(&exynos_pdma0_device, &iomem_resource);
- dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
- amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+ dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
+ amba_device_register(&exynos_pdma1_device, &iomem_resource);
- dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
- amba_device_register(&exynos4_mdma1_device, &iomem_resource);
+ dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
+ amba_device_register(&exynos_mdma1_device, &iomem_resource);
return 0;
}
-arch_initcall(exynos4_dma_init);
+arch_initcall(exynos_dma_init);
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
index d7498af..eb24f1e 100644
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ b/arch/arm/mach-exynos/include/mach/gpio.h
@@ -153,10 +153,11 @@
#define EXYNOS5_GPIO_B2_NR (4)
#define EXYNOS5_GPIO_B3_NR (4)
#define EXYNOS5_GPIO_C0_NR (7)
-#define EXYNOS5_GPIO_C1_NR (7)
+#define EXYNOS5_GPIO_C1_NR (4)
#define EXYNOS5_GPIO_C2_NR (7)
#define EXYNOS5_GPIO_C3_NR (7)
-#define EXYNOS5_GPIO_D0_NR (8)
+#define EXYNOS5_GPIO_C4_NR (7)
+#define EXYNOS5_GPIO_D0_NR (4)
#define EXYNOS5_GPIO_D1_NR (8)
#define EXYNOS5_GPIO_Y0_NR (6)
#define EXYNOS5_GPIO_Y1_NR (4)
@@ -199,7 +200,8 @@
EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
- EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+ EXYNOS5_GPIO_C4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+ EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
@@ -242,6 +244,7 @@
#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr))
#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr))
#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPC4(_nr) (EXYNOS5_GPIO_C4_START + (_nr))
#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr))
#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr))
#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr))
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index c02dae7..7a4b478 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -154,6 +154,13 @@
#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0 COMBINER_IRQ(16, 0)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0 COMBINER_IRQ(16, 1)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0 COMBINER_IRQ(16, 2)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0 COMBINER_IRQ(16, 3)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0 COMBINER_IRQ(16, 4)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0 COMBINER_IRQ(16, 5)
+
#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
@@ -221,24 +228,6 @@
#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
#define IRQ_PMU EXYNOS4_IRQ_PMU
-#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0
-#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0
-#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0
-#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0
-#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0
-#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0
-#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0
-#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0
-
-#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0
-#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0
-#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
-#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
-#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0
-#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0
-#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0
-#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0
-
#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM
@@ -298,6 +287,7 @@
#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
+#define EXYNOS5_IRQ_WDT_IOP IRQ_SPI(83)
#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
@@ -306,8 +296,8 @@
#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
#define EXYNOS5_IRQ_2D IRQ_SPI(91)
-#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92)
-#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93)
+#define EXYNOS5_IRQ_EFNFCON_0 IRQ_SPI(92)
+#define EXYNOS5_IRQ_EFNFCON_1 IRQ_SPI(93)
#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
@@ -321,7 +311,7 @@
#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
-
+#define EXYNOS5_IRQ_ADC1 IRQ_SPI(107)
#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
@@ -330,8 +320,9 @@
#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
-#define EXYNOS5_IRQ_NFCON IRQ_SPI(116)
+#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
+#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
@@ -339,7 +330,6 @@
#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
-#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6)
#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
@@ -350,6 +340,8 @@
#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
+#define EXYNOS5_IRQ_SYSMMU_LITE2_0 COMBINER_IRQ(3, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE2_1 COMBINER_IRQ(3, 1)
#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
@@ -373,8 +365,8 @@
#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(6, 3)
#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
@@ -386,11 +378,9 @@
#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(8, 6)
#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
@@ -406,17 +396,24 @@
#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
+#define EXYNOS5_IRQ_MDMA1_ABORT COMBINER_IRQ(13, 1)
+
+#define EXYNOS5_IRQ_MDMA0_ABORT COMBINER_IRQ(15, 3)
+
#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
+#define EXYNOS5_IRQ_ARMIOP_GIC COMBINER_IRQ(19, 0)
+#define EXYNOS5_IRQ_ARMISP_GIC COMBINER_IRQ(19, 1)
+#define EXYNOS5_IRQ_IOP_GIC COMBINER_IRQ(19, 3)
+#define EXYNOS5_IRQ_ISP_GIC COMBINER_IRQ(19, 4)
+
+#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
+
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1)
-#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2)
#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
-#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5)
-#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
@@ -447,7 +444,7 @@
#define EXYNOS5_MAX_COMBINER_NR 32
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 14
#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index e009a66..ca4aa89 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -34,6 +34,9 @@
#define EXYNOS4_PA_JPEG 0x11840000
+/* x = 0...1 */
+#define EXYNOS4_PA_FIMC_LITE(x) (0x12390000 + ((x) * 0x10000))
+
#define EXYNOS4_PA_G2D 0x12800000
#define EXYNOS4_PA_I2S0 0x03830000
@@ -78,8 +81,8 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
-#define EXYNOS5_PA_GIC_CPU 0x10480000
-#define EXYNOS5_PA_GIC_DIST 0x10490000
+#define EXYNOS5_PA_GIC_CPU 0x10482000
+#define EXYNOS5_PA_GIC_DIST 0x10481000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
@@ -95,6 +98,7 @@
#define EXYNOS5_PA_PDMA1 0x121B0000
#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
+#define EXYNOS4_PA_SYSMMU_2D_ACP 0x10A40000
#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
@@ -103,6 +107,12 @@
#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000
#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000
#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000
+#define EXYNOS4_PA_SYSMMU_FIMC_ISP 0x12260000
+#define EXYNOS4_PA_SYSMMU_FIMC_DRC 0x12270000
+#define EXYNOS4_PA_SYSMMU_FIMC_FD 0x122A0000
+#define EXYNOS4_PA_SYSMMU_ISPCPU 0x122B0000
+#define EXYNOS4_PA_SYSMMU_FIMC_LITE0 0x123B0000
+#define EXYNOS4_PA_SYSMMU_FIMC_LITE1 0x123C0000
#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000
#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000
#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000
@@ -110,6 +120,37 @@
#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
+
+#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000
+#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000
+#define EXYNOS5_PA_SYSMMU_2D 0x10A60000
+#define EXYNOS5_PA_SYSMMU_MFC_L 0x11200000
+#define EXYNOS5_PA_SYSMMU_MFC_R 0x11210000
+#define EXYNOS5_PA_SYSMMU_ROTATOR 0x11D40000
+#define EXYNOS5_PA_SYSMMU_MDMA2 0x11D50000
+#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000
+#define EXYNOS5_PA_SYSMMU_IOP 0x12360000
+#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000
+#define EXYNOS5_PA_SYSMMU_GPS 0x12630000
+#define EXYNOS5_PA_SYSMMU_ISP 0x13260000
+#define EXYNOS5_PA_SYSMMU_DRC 0x12370000
+#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000
+#define EXYNOS5_PA_SYSMMU_SCALERP 0x13290000
+#define EXYNOS5_PA_SYSMMU_FD 0x132A0000
+#define EXYNOS5_PA_SYSMMU_ISPCPU 0x132B0000
+#define EXYNOS5_PA_SYSMMU_ODC 0x132C0000
+#define EXYNOS5_PA_SYSMMU_DIS0 0x132D0000
+#define EXYNOS5_PA_SYSMMU_DIS1 0x132E0000
+#define EXYNOS5_PA_SYSMMU_3DNR 0x132F0000
+#define EXYNOS5_PA_SYSMMU_LITE0 0x13C40000
+#define EXYNOS5_PA_SYSMMU_LITE1 0x13C50000
+#define EXYNOS5_PA_SYSMMU_GSC0 0x13E80000
+#define EXYNOS5_PA_SYSMMU_GSC1 0x13E90000
+#define EXYNOS5_PA_SYSMMU_GSC2 0x13EA0000
+#define EXYNOS5_PA_SYSMMU_GSC3 0x13EB0000
+#define EXYNOS5_PA_SYSMMU_FIMD1 0x14640000
+#define EXYNOS5_PA_SYSMMU_TV 0x14650000
+
#define EXYNOS4_PA_SPI0 0x13920000
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index d9578a5..b78b5f3 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -135,6 +135,9 @@
#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800)
#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900)
+#define EXYNOS4_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x18800)
+#define EXYNOS4_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x18804)
+
#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */
#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31)
@@ -303,6 +306,8 @@
#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
+#define EXYNOS5_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x0C800)
+#define EXYNOS5_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x0C804)
#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
@@ -317,6 +322,8 @@
#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
+#define EXYNOS5_PLL_DIV2_SEL EXYNOS_CLKREG(0x20A24)
+
#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index d457d05..4dbb862 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -180,7 +180,7 @@
#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
-/* Only for EXYNOS4212 */
+/* Only for EXYNOS4x12 */
#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
@@ -221,4 +221,12 @@
#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
+/* Only for EXYNOS4412 */
+#define S5P_ARM_CORE2_LOWPWR S5P_PMUREG(0x1020)
+#define S5P_DIS_IRQ_CORE2 S5P_PMUREG(0x1024)
+#define S5P_DIS_IRQ_CENTRAL2 S5P_PMUREG(0x1028)
+#define S5P_ARM_CORE3_LOWPWR S5P_PMUREG(0x1030)
+#define S5P_DIS_IRQ_CORE3 S5P_PMUREG(0x1034)
+#define S5P_DIS_IRQ_CENTRAL3 S5P_PMUREG(0x1038)
+
#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
deleted file mode 100644
index 68ff6ad..0000000
--- a/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - System MMU register
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SYSMMU_H
-#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
-
-#define S5P_MMU_CTRL 0x000
-#define S5P_MMU_CFG 0x004
-#define S5P_MMU_STATUS 0x008
-#define S5P_MMU_FLUSH 0x00C
-#define S5P_PT_BASE_ADDR 0x014
-#define S5P_INT_STATUS 0x018
-#define S5P_INT_CLEAR 0x01C
-#define S5P_PAGE_FAULT_ADDR 0x024
-#define S5P_AW_FAULT_ADDR 0x028
-#define S5P_AR_FAULT_ADDR 0x02C
-#define S5P_DEFAULT_SLAVE_ADDR 0x030
-
-#endif /* __ASM_ARCH_REGS_SYSMMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
index 576efdf..c71a5fb 100644
--- a/arch/arm/mach-exynos/include/mach/spi-clocks.h
+++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h
@@ -11,6 +11,6 @@
#define __ASM_ARCH_SPI_CLKS_H __FILE__
/* Must source from SCLK_SPI */
-#define EXYNOS4_SPI_SRCCLK_SCLK 0
+#define EXYNOS_SPI_SRCCLK_SCLK 0
#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h
index 6a5fbb5..998daf2 100644
--- a/arch/arm/mach-exynos/include/mach/sysmmu.h
+++ b/arch/arm/mach-exynos/include/mach/sysmmu.h
@@ -1,46 +1,66 @@
-/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Samsung sysmmu driver for EXYNOS4
+ * EXYNOS - System MMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
-#ifndef __ASM_ARM_ARCH_SYSMMU_H
-#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
+#ifndef _ARM_MACH_EXYNOS_SYSMMU_H_
+#define _ARM_MACH_EXYNOS_SYSMMU_H_
-enum exynos4_sysmmu_ips {
- SYSMMU_MDMA,
- SYSMMU_SSS,
- SYSMMU_FIMC0,
- SYSMMU_FIMC1,
- SYSMMU_FIMC2,
- SYSMMU_FIMC3,
- SYSMMU_JPEG,
- SYSMMU_FIMD0,
- SYSMMU_FIMD1,
- SYSMMU_PCIe,
- SYSMMU_G2D,
- SYSMMU_ROTATOR,
- SYSMMU_MDMA2,
- SYSMMU_TV,
- SYSMMU_MFC_L,
- SYSMMU_MFC_R,
- EXYNOS4_SYSMMU_TOTAL_IPNUM,
+struct sysmmu_platform_data {
+ char *dbgname;
+ /* comma(,) separated list of clock names for clock gating */
+ char *clockname;
};
-#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM
+#define SYSMMU_DEVNAME_BASE "exynos-sysmmu"
-extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
+#define SYSMMU_CLOCK_NAME "sysmmu"
+#define SYSMMU_CLOCK_NAME2 "sysmmu_mc"
-typedef enum exynos4_sysmmu_ips sysmmu_ips;
+#ifdef CONFIG_EXYNOS_DEV_SYSMMU
+#include <linux/device.h>
+struct platform_device;
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
-void sysmmu_clk_enable(sysmmu_ips ips);
-void sysmmu_clk_disable(sysmmu_ips ips);
+#define SYSMMU_PLATDEV(ipname) exynos_device_sysmmu_##ipname
-#endif /* __ASM_ARM_ARCH_SYSMMU_H */
+extern struct platform_device SYSMMU_PLATDEV(mfc_l);
+extern struct platform_device SYSMMU_PLATDEV(mfc_r);
+extern struct platform_device SYSMMU_PLATDEV(tv);
+extern struct platform_device SYSMMU_PLATDEV(jpeg);
+extern struct platform_device SYSMMU_PLATDEV(rot);
+extern struct platform_device SYSMMU_PLATDEV(fimc0);
+extern struct platform_device SYSMMU_PLATDEV(fimc1);
+extern struct platform_device SYSMMU_PLATDEV(fimc2);
+extern struct platform_device SYSMMU_PLATDEV(fimc3);
+extern struct platform_device SYSMMU_PLATDEV(gsc0);
+extern struct platform_device SYSMMU_PLATDEV(gsc1);
+extern struct platform_device SYSMMU_PLATDEV(gsc2);
+extern struct platform_device SYSMMU_PLATDEV(gsc3);
+extern struct platform_device SYSMMU_PLATDEV(isp);
+extern struct platform_device SYSMMU_PLATDEV(fimd0);
+extern struct platform_device SYSMMU_PLATDEV(fimd1);
+extern struct platform_device SYSMMU_PLATDEV(camif0);
+extern struct platform_device SYSMMU_PLATDEV(camif1);
+extern struct platform_device SYSMMU_PLATDEV(2d);
+
+#ifdef CONFIG_IOMMU_API
+static inline void platform_set_sysmmu(
+ struct device *sysmmu, struct device *dev)
+{
+ dev->archdata.iommu = sysmmu;
+}
+#endif
+
+#else /* !CONFIG_EXYNOS_DEV_SYSMMU */
+#define platform_set_sysmmu(dev, sysmmu) do { } while (0)
+#endif
+
+#define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id)
+
+#endif /* _ARM_MACH_EXYNOS_SYSMMU_H_ */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index fed7116..5a3daa0 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -147,7 +147,6 @@
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
- &exynos4_device_sysmmu,
&samsung_asoc_dma,
&armlex4210_smsc911x,
&exynos4_device_ahci,
@@ -204,6 +203,7 @@
.map_io = armlex4210_map_io,
.handle_irq = gic_handle_irq,
.init_machine = armlex4210_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 8245f1c..e7e9743 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -83,6 +83,7 @@
.map_io = exynos4210_dt_map_io,
.handle_irq = gic_handle_irq,
.init_machine = exynos4210_dt_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.dt_compat = exynos4210_dt_compat,
.restart = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 4711c89..7b1e11a 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -43,6 +43,10 @@
"exynos4210-uart.2", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
"exynos4210-uart.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
+ "s3c2440-i2c.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
+ "s3c2440-i2c.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
@@ -72,6 +76,7 @@
.map_io = exynos5250_dt_map_io,
.handle_irq = gic_handle_irq,
.init_machine = exynos5250_dt_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.dt_compat = exynos5250_dt_compat,
.restart = exynos5_restart,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 6c31f2a..972983e 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1389,6 +1389,7 @@
.map_io = nuri_map_io,
.handle_irq = gic_handle_irq,
.init_machine = nuri_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 26124a3..a7f7fd5 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -766,6 +766,7 @@
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
.restart = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fe772d8..fb09c70 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -316,6 +316,7 @@
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 5af9606..70df1a0 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -295,7 +295,6 @@
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_spdif,
- &exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
&s5p_device_fimd0,
@@ -412,6 +411,7 @@
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
+ .init_late = exynos_init_late,
.timer = &exynos4_timer,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 6b731b8..083b44d 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1157,6 +1157,7 @@
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,
.init_machine = universal_machine_init,
+ .init_late = exynos_init_late,
.timer = &s5p_timer,
.reserve = &universal_reserve,
.restart = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 897d9a9..b601fb8 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -388,6 +388,7 @@
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
+ int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
@@ -414,14 +415,18 @@
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
+ mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
+ EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = EXYNOS4_IRQ_MCT_L0;
- setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
+ evt->irq = mct_lx_irq;
+ setup_irq(mct_lx_irq, &mct_tick0_event_irq);
} else {
+ mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
+ EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = EXYNOS4_IRQ_MCT_L1;
- setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
+ evt->irq = mct_lx_irq;
+ setup_irq(mct_lx_irq, &mct_tick1_event_irq);
+ irq_set_affinity(mct_lx_irq, cpumask_of(1));
}
} else {
enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
@@ -473,7 +478,7 @@
static void __init exynos4_timer_init(void)
{
- if (soc_is_exynos4210())
+ if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
mct_int_type = MCT_INT_SPI;
else
mct_int_type = MCT_INT_PPI;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 428cfeb..563dea9 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -275,7 +275,7 @@
static struct subsys_interface exynos4_pm_interface = {
.name = "exynos4_pm",
- .subsys = &exynos4_subsys,
+ .subsys = &exynos_subsys,
.add_dev = exynos4_pm_add,
};
@@ -313,7 +313,7 @@
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
- if (soc_is_exynos4212()) {
+ if (soc_is_exynos4212() || soc_is_exynos4412()) {
tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
S5P_USE_STANDBYWFE_ISP_ARM);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 13b3068..e9fafcf 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -193,9 +193,8 @@
}
arch_initcall(exynos4_pm_init_power_domain);
-static __init int exynos_pm_late_initcall(void)
+int __init exynos_pm_late_initcall(void)
{
pm_genpd_poweroff_unused();
return 0;
}
-late_initcall(exynos_pm_late_initcall);
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index bba48f5..77c6815 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -94,7 +94,7 @@
{ PMU_TABLE_END,},
};
-static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+static struct exynos4_pmu_conf exynos4x12_pmu_config[] = {
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
@@ -202,6 +202,16 @@
{ PMU_TABLE_END,},
};
+static struct exynos4_pmu_conf exynos4412_pmu_config[] = {
+ { S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
{
unsigned int i;
@@ -209,6 +219,12 @@
for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
__raw_writel(exynos4_pmu_config[i].val[mode],
exynos4_pmu_config[i].reg);
+
+ if (soc_is_exynos4412()) {
+ for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
+ __raw_writel(exynos4412_pmu_config[i].val[mode],
+ exynos4412_pmu_config[i].reg);
+ }
}
static int __init exynos4_pmu_init(void)
@@ -218,9 +234,9 @@
if (soc_is_exynos4210()) {
exynos4_pmu_config = exynos4210_pmu_config;
pr_info("EXYNOS4210 PMU Initialize\n");
- } else if (soc_is_exynos4212()) {
- exynos4_pmu_config = exynos4212_pmu_config;
- pr_info("EXYNOS4212 PMU Initialize\n");
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ exynos4_pmu_config = exynos4x12_pmu_config;
+ pr_info("EXYNOS4x12 PMU Initialize\n");
} else {
pr_info("EXYNOS4: PMU not supported\n");
}
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index cca8c0c..0021f72 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -34,6 +34,7 @@
config SOC_IMX1
bool
select ARCH_MX1
+ select COMMON_CLK
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -42,12 +43,14 @@
bool
select MACH_MX21
select CPU_ARM926T
+ select COMMON_CLK
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
+ select COMMON_CLK
select CPU_ARM926T
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
@@ -56,6 +59,7 @@
bool
select MACH_MX27
select CPU_ARM926T
+ select COMMON_CLK
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -64,12 +68,14 @@
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
+ select COMMON_CLK
select SMP_ON_UP if SMP
config SOC_IMX35
bool
select CPU_V6
select ARCH_MXC_IOMUX_V3
+ select COMMON_CLK
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -77,6 +83,7 @@
config SOC_IMX5
select CPU_V7
select MXC_TZIC
+ select COMMON_CLK
select ARCH_MXC_IOMUX_V3
select ARCH_HAS_CPUFREQ
select ARCH_MX5
@@ -815,6 +822,7 @@
bool "i.MX6 Quad support"
select ARM_CPU_SUSPEND if PM
select ARM_GIC
+ select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU
select HAVE_IMX_GPC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 4937c07..ff29421 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,15 +1,18 @@
-obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
+ clk-pfd.o clk-busy.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -70,7 +73,7 @@
AFLAGS_head-v7.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3851d8a..05541cf 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -42,4 +42,5 @@
dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
new file mode 100644
index 0000000..1a7a8dd
--- /dev/null
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ while (readl_relaxed(reg) & (1 << shift))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+struct clk_busy_divider {
+ struct clk_divider div;
+ const struct clk_ops *div_ops;
+ void __iomem *reg;
+ u8 shift;
+};
+
+static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
+{
+ struct clk_divider *div = container_of(hw, struct clk_divider, hw);
+
+ return container_of(div, struct clk_busy_divider, div);
+}
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+ int ret;
+
+ ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+ .recalc_rate = clk_busy_divider_recalc_rate,
+ .round_rate = clk_busy_divider_round_rate,
+ .set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift)
+{
+ struct clk_busy_divider *busy;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return ERR_PTR(-ENOMEM);
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->div.reg = reg;
+ busy->div.shift = shift;
+ busy->div.width = width;
+ busy->div.lock = &imx_ccm_lock;
+ busy->div_ops = &clk_divider_ops;
+
+ init.name = name;
+ init.ops = &clk_busy_divider_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ busy->div.hw.init = &init;
+
+ clk = clk_register(NULL, &busy->div.hw);
+ if (!clk)
+ kfree(busy);
+
+ return clk;
+}
+
+struct clk_busy_mux {
+ struct clk_mux mux;
+ const struct clk_ops *mux_ops;
+ void __iomem *reg;
+ u8 shift;
+};
+
+static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
+{
+ struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
+
+ return container_of(mux, struct clk_busy_mux, mux);
+}
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+ return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+ int ret;
+
+ ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+struct clk_ops clk_busy_mux_ops = {
+ .get_parent = clk_busy_mux_get_parent,
+ .set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ const char **parent_names, int num_parents)
+{
+ struct clk_busy_mux *busy;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return ERR_PTR(-ENOMEM);
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->mux.reg = reg;
+ busy->mux.shift = shift;
+ busy->mux.width = width;
+ busy->mux.lock = &imx_ccm_lock;
+ busy->mux_ops = &clk_mux_ops;
+
+ init.name = name;
+ init.ops = &clk_busy_mux_ops;
+ init.flags = 0;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ busy->mux.hw.init = &init;
+
+ clk = clk_register(NULL, &busy->mux.hw);
+ if (IS_ERR(clk))
+ kfree(busy);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
new file mode 100644
index 0000000..3c1b8ff
--- /dev/null
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent. No clk_set_rate support
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg |= 3 << gate->bit_idx;
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ struct clk_gate *gate = to_clk_gate(hw);
+
+ reg = readl(gate->reg);
+
+ if (((reg >> gate->bit_idx) & 3) == 3)
+ return 1;
+
+ return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate2_flags, spinlock_t *lock)
+{
+ struct clk_gate *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ /* struct clk_gate assignments */
+ gate->reg = reg;
+ gate->bit_idx = bit_idx;
+ gate->flags = clk_gate2_flags;
+ gate->lock = lock;
+
+ init.name = name;
+ init.ops = &clk_gate2_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ gate->hw.init = &init;
+
+ clk = clk_register(dev, &gate->hw);
+ if (IS_ERR(clk))
+ kfree(clk);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
new file mode 100644
index 0000000..0f0beb5
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+/* CCM register addresses */
+#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_PCDR IO_ADDR_CCM(0x20)
+
+/* SCM register addresses */
+#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+#define SCM_GCCR IO_ADDR_SCM(0xc)
+
+static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
+ "fclk", };
+enum imx1_clks {
+ dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
+ fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
+ mma_gate, usbd_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[clk32] = imx_clk_fixed("clk32", fref);
+ clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
+ clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+ clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+ clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
+ ARRAY_SIZE(prem_sel_clks));
+ clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+ clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
+ clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
+ clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
+ clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
+ clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
+ clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+ clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
+ ARRAY_SIZE(clko_sel_clks));
+ clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+ clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+ clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+ clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("imx1 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
+ clk_register_clkdev(clk[mma_gate], "mma", NULL);
+ clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
+ clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
+ clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
+ clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
+ clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
+ clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
+ clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
+ clk_register_clkdev(clk[per2], "per", "imx-fb.0");
+ clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[hclk], "mshc", NULL);
+ clk_register_clkdev(clk[per3], "ssi", NULL);
+ clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+ clk_register_clkdev(clk[clko], "clko", NULL);
+
+ mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+ MX1_TIM1_INT);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
new file mode 100644
index 0000000..4e4f384
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+
+static const char *mpll_sel_clks[] = { "fpm", "ckih", };
+static const char *spll_sel_clks[] = { "fpm", "ckih", };
+
+enum imx21_clks {
+ ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
+ per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
+ uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
+ pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
+ lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
+ per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
+ ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
+ emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
+ gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ int i;
+
+ clk[ckil] = imx_clk_fixed("ckil", lref);
+ clk[ckih] = imx_clk_fixed("ckih", href);
+ clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+ clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
+ ARRAY_SIZE(mpll_sel_clks));
+ clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
+ ARRAY_SIZE(spll_sel_clks));
+ clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+ clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+ clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
+ clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+ clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+ clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
+ clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
+ clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
+ clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
+ clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+ clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+ clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+ clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+ clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+ clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
+ clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+ clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+ clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+ clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
+ clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+ clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+ clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+ clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+ clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+ clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+ clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
+ clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+ clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+ clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+ clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+ clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+ clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+ clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX21 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[per1], "per1", NULL);
+ clk_register_clkdev(clk[per2], "per2", NULL);
+ clk_register_clkdev(clk[per3], "per3", NULL);
+ clk_register_clkdev(clk[per4], "per4", NULL);
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
+ clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
+ clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
+ clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
+ clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
+ clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
+ clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
+ clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
+ clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
+ clk_register_clkdev(clk[per3], "per", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
+ clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
+ clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[brom_gate], "brom", NULL);
+ clk_register_clkdev(clk[emma_gate], "emma", NULL);
+ clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
+ clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
+ clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+ clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
+ clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
+ clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
+ clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+
+ mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+ MX21_INT_GPT1);
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
new file mode 100644
index 0000000..d9833bb
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include "clk.h"
+
+#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL 0x00
+#define CCM_UPCTL 0x04
+#define CCM_CCTL 0x08
+#define CCM_CGCR0 0x0C
+#define CCM_CGCR1 0x10
+#define CCM_CGCR2 0x14
+#define CCM_PCDR0 0x18
+#define CCM_PCDR1 0x1C
+#define CCM_PCDR2 0x20
+#define CCM_PCDR3 0x24
+#define CCM_RCSR 0x28
+#define CCM_CRDR 0x2C
+#define CCM_DCVR0 0x30
+#define CCM_DCVR1 0x34
+#define CCM_DCVR2 0x38
+#define CCM_DCVR3 0x3c
+#define CCM_LTR0 0x40
+#define CCM_LTR1 0x44
+#define CCM_LTR2 0x48
+#define CCM_LTR3 0x4c
+#define CCM_MCR 0x64
+
+#define ccm(x) (CRM_BASE + (x))
+
+static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
+static const char *per_sel_clks[] = { "ahb", "upll", };
+
+enum mx25_clks {
+ dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
+ per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
+ per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
+ per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
+ per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
+ csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per,
+ lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per,
+ csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb,
+ usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg,
+ cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg,
+ kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg,
+ ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg,
+ uart4_ipg, uart5_ipg, wdt_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx25_clocks_init(void)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[osc] = imx_clk_fixed("osc", 24000000);
+ clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
+ clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
+ clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
+ clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
+ clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
+ clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
+ clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
+ clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
+ clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
+ clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
+ clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
+ clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
+ clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
+ clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
+ clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
+ clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
+ clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
+ clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
+ clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
+ clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
+ clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
+ clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+ clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
+ clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
+ clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
+ clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
+ clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7);
+ clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8);
+ clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
+ clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
+ clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+ clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+ clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
+ clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
+ clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
+ clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+ clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+ clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+ clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
+ clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
+ clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
+ clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1), 5);
+ clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
+ clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
+ clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
+ clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
+ clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
+ clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+ clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+ clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
+ clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+ clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
+ clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
+ clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
+ clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
+ clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
+ clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
+ clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
+ clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
+ clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
+ clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
+ clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
+ clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
+ clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+ clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX25 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ /* i.mx25 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0");
+ /* i.mx25 has the i.mx35 type cspi */
+ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
+ clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
+ clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
+ clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
+ clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
+ clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
+ clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
+ clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
+ clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
+ clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
+ clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
+ clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
+ clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
+ clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[dummy], "audmux", NULL);
+ clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
+ clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
+ /* i.mx25 has the i.mx35 type sdma */
+ clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
+ clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
+ clk_register_clkdev(clk[iim_ipg], "iim", NULL);
+
+ mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
new file mode 100644
index 0000000..50a7ebd
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -0,0 +1,290 @@
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_UPDATE_DIS (1 << 31)
+#define CCM_CSCR_SSI2 (1 << 23)
+#define CCM_CSCR_SSI1 (1 << 22)
+#define CCM_CSCR_VPU (1 << 21)
+#define CCM_CSCR_MSHC (1 << 20)
+#define CCM_CSCR_SPLLRES (1 << 19)
+#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC (1 << 15)
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
+static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
+static const char *clko_sel_clks[] = {
+ "ckil", "prem", "ckih", "ckih",
+ "ckih", "mpll", "spll", "cpu_div",
+ "ahb", "ipg", "per1_div", "per2_div",
+ "per3_div", "per4_div", "ssi1_div", "ssi2_div",
+ "nfc_div", "mshc_div", "vpu_div", "60m",
+ "32k", "usb_div", "dptc",
+};
+
+static const char *ssi_sel_clks[] = { "spll", "mpll", };
+
+enum mx27_clks {
+ dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
+ per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
+ clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
+ clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
+ sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
+ rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
+ kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
+ gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
+ gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
+ emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
+ cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
+ vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
+ usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
+ vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
+ csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
+ uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
+ uart2_ipg_gate, uart1_ipg_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx27_clocks_init(unsigned long fref)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[ckih] = imx_clk_fixed("ckih", fref);
+ clk[ckil] = imx_clk_fixed("ckil", 32768);
+ clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0);
+ clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
+ clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+ clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ } else {
+ clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+ }
+
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+ clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+ clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+ clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+ clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+ clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+ clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+ clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
+ clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+ clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+ else
+ clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+ clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+ clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+ clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+ clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+ clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+ clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+ clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+ clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+ clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+ clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+ clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+ clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+ clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+ clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+ clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+ clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+ clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+ clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+ clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+ clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+ clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+ clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
+ clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
+ clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
+ clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
+ clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
+ clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
+ clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
+ clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+ clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+ clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+ clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+ clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+ clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+ clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+ clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+ clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+ clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+ clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+ clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+ clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+ clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+ clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+ clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX27 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
+ clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
+ clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
+ clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
+ clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
+ clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
+ clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
+ clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0");
+ clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0");
+ clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1");
+ clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2");
+ clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
+ clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
+ clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
+ clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+ clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu");
+ clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu");
+ clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
+ clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
+ clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
+ clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
+ clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+ clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
+ clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
+ clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
+ clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
+ clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL);
+ clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
+ clk_register_clkdev(clk[cpu_div], "cpu", NULL);
+ clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
+ clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
+
+ mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+ MX27_INT_GPT1);
+
+ clk_prepare_enable(clk[emi_ahb_gate]);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+int __init mx27_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx27_clocks_init(fref);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
new file mode 100644
index 0000000..a854b9c
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "clk.h"
+#include "crmregs-imx3.h"
+
+static const char *mcu_main_sel[] = { "spll", "mpll", };
+static const char *per_sel[] = { "per_div", "ipg", };
+static const char *csi_sel[] = { "upll", "spll", };
+static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
+
+enum mx31_clks {
+ ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div,
+ per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+ fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
+ iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
+ uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
+ mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
+ sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
+ uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
+ gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+ void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+ int i;
+
+ clk[ckih] = imx_clk_fixed("ckih", fref);
+ clk[ckil] = imx_clk_fixed("ckil", 32768);
+ clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
+ clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL);
+ clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL);
+ clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
+ clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
+ clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
+ clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
+ clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
+ clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
+ clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
+ clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
+ clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
+ clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
+ clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
+ clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
+ clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
+ clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
+ clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
+ clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
+ clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
+ clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
+ clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
+ clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
+ clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
+ clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
+ clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
+ clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
+ clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
+ clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
+ clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
+ clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
+ clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
+ clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
+ clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
+ clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
+ clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
+ clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
+ clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
+ clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
+ clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
+ clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
+ clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
+ clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
+ clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
+ clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
+ clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("imx31 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
+ clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
+ clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
+ clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+ clk_register_clkdev(clk[epit1_gate], "epit", NULL);
+ clk_register_clkdev(clk[epit2_gate], "epit", NULL);
+ clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+ clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+ /* i.mx31 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
+ clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[firi_gate], "firi", NULL);
+ clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
+ clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
+ clk_register_clkdev(clk[rng_gate], "rng", NULL);
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
+ clk_register_clkdev(clk[iim_gate], "iim", NULL);
+
+ clk_set_parent(clk[csi], clk[upll]);
+ clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ mx31_revision();
+ clk_disable_unprepare(clk[iim_gate]);
+
+ mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+ MX31_INT_GPT);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
new file mode 100644
index 0000000..a9e60bf
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "crmregs-imx3.h"
+#include "clk.h"
+
+struct arm_ahb_div {
+ unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+ { .arm = 1, .ahb = 4, .sel = 0},
+ { .arm = 1, .ahb = 3, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 1, .sel = 0},
+ { .arm = 1, .ahb = 5, .sel = 0},
+ { .arm = 1, .ahb = 8, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 1},
+ { .arm = 2, .ahb = 4, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static char hsp_div_532[] = { 4, 8, 3, 0 };
+static char hsp_div_400[] = { 3, 6, 3, 0 };
+
+static const char *std_sel[] = {"ppll", "arm"};
+static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
+
+enum mx35_clks {
+ ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+ arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
+ esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
+ spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
+ ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
+ audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
+ edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
+ esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
+ gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
+ kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
+ rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
+ ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
+ wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
+ clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx35_clocks_init()
+{
+ void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
+ u32 pdr0, consumer_sel, hsp_sel;
+ struct arm_ahb_div *aad;
+ unsigned char *hsp_div;
+ int i;
+
+ pdr0 = __raw_readl(base + MXC_CCM_PDR0);
+ consumer_sel = (pdr0 >> 16) & 0xf;
+ aad = &clk_consumer[consumer_sel];
+ if (!aad->arm) {
+ pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
+ /*
+ * We are basically stuck. Continue with a default entry and hope we
+ * get far enough to actually show the above message
+ */
+ aad = &clk_consumer[0];
+ }
+
+ clk[ckih] = imx_clk_fixed("ckih", 24000000);
+ clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL);
+ clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL);
+
+ clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
+
+ if (aad->sel)
+ clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
+ else
+ clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
+
+ if (clk_get_rate(clk[arm]) > 400000000)
+ hsp_div = hsp_div_532;
+ else
+ hsp_div = hsp_div_400;
+
+ hsp_sel = (pdr0 >> 20) & 0x3;
+ if (!hsp_div[hsp_sel]) {
+ pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
+ hsp_sel = 0;
+ }
+
+ clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
+
+ clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+
+ clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6);
+ clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3);
+ clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
+
+ clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6);
+
+ clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6);
+ clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6);
+ clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
+
+ clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */
+ clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
+
+ clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3);
+ clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6);
+ clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3);
+ clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6);
+
+ clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6);
+
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
+
+ clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0);
+ clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2);
+ clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4);
+ clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0, 6);
+ clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0, 8);
+ clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10);
+ clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12);
+ clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14);
+ clk[edio_gate] = imx_clk_gate2("edio_gate", "ipg", base + MX35_CCM_CGR0, 16);
+ clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18);
+ clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20);
+ clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22);
+ clk[esai_gate] = imx_clk_gate2("esai_gate", "ipg", base + MX35_CCM_CGR0, 24);
+ clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26);
+ clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28);
+ clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30);
+
+ clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1, 0);
+ clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1, 2);
+ clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1, 4);
+ clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1, 6);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1, 8);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14);
+ clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16);
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18);
+ clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20);
+ clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22);
+ clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26);
+ clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28);
+ clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30);
+
+ clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2, 0);
+ clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2, 2);
+ clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2, 4);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2, 6);
+ clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2, 8);
+ clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10);
+ clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12);
+ clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14);
+ clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16);
+ clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18);
+ clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20);
+ clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22);
+ clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24);
+ clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
+ clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
+
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3, 0);
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
+ clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX35 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+
+ clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
+ clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
+ clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
+ clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
+ clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
+ clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
+ clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
+ clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
+ /* i.mx35 has the i.mx27 type fec */
+ clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+ clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
+ clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+ /* i.mx35 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+
+ clk_prepare_enable(clk[spba_gate]);
+ clk_prepare_enable(clk[gpio1_gate]);
+ clk_prepare_enable(clk[gpio2_gate]);
+ clk_prepare_enable(clk[gpio3_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ clk_prepare_enable(clk[emi_gate]);
+
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+
+#ifdef CONFIG_MXC_USE_EPIT
+ epit_timer_init(&epit1_clk,
+ MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
+ mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
+ MX35_INT_GPT);
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
new file mode 100644
index 0000000..fcd94f3
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "crm-regs-imx5.h"
+#include "clk.h"
+
+/* Low-power Audio Playback Mode clock */
+static const char *lp_apm_sel[] = { "osc", };
+
+/* This is used multiple times */
+static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", };
+static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", };
+static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", };
+static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", };
+static const char *per_root_sel[] = { "per_podf", "ipg", };
+static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", };
+static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", };
+static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", };
+static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", };
+static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
+static const char *emi_slow_sel[] = { "main_bus", "ahb", };
+static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
+static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
+static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
+static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+
+enum imx5_clks {
+ dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
+ uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
+ emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
+ usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
+ tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
+ uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
+ gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
+ gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
+ esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate,
+ ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate,
+ ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s,
+ ipu_gate, nfc_gate, ipu_di1_gate, vpu_s, vpu_gate,
+ vpu_reference_gate, uart4_ipg_gate, uart4_per_gate, uart5_ipg_gate,
+ uart5_per_gate, tve_gate, tve_pred, esdhc1_per_gate, esdhc2_per_gate,
+ esdhc3_per_gate, esdhc4_per_gate, usb_phy_gate, hsi2c_gate,
+ mipi_hsc1_gate, mipi_hsc2_gate, mipi_esc_gate, mipi_hsp_gate,
+ ldb_di1_div_3_5, ldb_di1_div, ldb_di0_div_3_5, ldb_di0_div,
+ ldb_di1_gate, can2_serial_gate, can2_ipg_gate, i2c3_gate, lp_apm,
+ periph_apm, main_bus, ahb_max, aips_tz1, aips_tz2, tmax1, tmax2,
+ tmax3, spba, uart_sel, esdhc_a_sel, esdhc_b_sel, esdhc_a_podf,
+ esdhc_b_podf, ecspi_sel, usboh3_sel, usb_phy_sel, iim_gate,
+ usboh3_gate, emi_fast_gate, ipu_di0_gate,gpc_dvfs, pll1_sw, pll2_sw,
+ pll3_sw, ipu_di0_sel, ipu_di1_sel, tve_ext_sel, mx51_mipi, pll4_sw,
+ ldb_di1_sel, di_pll4_podf, ldb_di0_sel, ldb_di0_gate, usb_phy1_gate,
+ usb_phy2_gate, per_lp_apm, per_pred1, per_pred2, per_podf, per_root,
+ ssi_apm, ssi1_root_sel, ssi2_root_sel, ssi3_root_sel, ssi_ext1_sel,
+ ssi_ext2_sel, ssi_ext1_com_sel, ssi_ext2_com_sel, ssi1_root_pred,
+ ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred,
+ ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
+ ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
+ clk_max
+};
+
+static struct clk *clk[clk_max];
+
+static void __init mx5_clocks_common_init(unsigned long rate_ckil,
+ unsigned long rate_osc, unsigned long rate_ckih1,
+ unsigned long rate_ckih2)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
+ clk[osc] = imx_clk_fixed("osc", rate_osc);
+ clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
+ clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
+
+ clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
+ lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+ clk[periph_apm] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+ periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+ clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+ main_bus_sel, ARRAY_SIZE(main_bus_sel));
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
+ clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
+ clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
+ clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ per_root_sel, ARRAY_SIZE(per_root_sel));
+ clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
+ clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
+ clk[aips_tz1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24);
+ clk[aips_tz2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26);
+ clk[tmax1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0);
+ clk[tmax2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2);
+ clk[tmax3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4);
+ clk[spba] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2);
+ clk[axi_a] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3);
+ clk[axi_b] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3);
+ clk[uart_sel] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[uart_pred] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
+ clk[uart_root] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
+
+ clk[esdhc_a_sel] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[esdhc_b_sel] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[esdhc_a_pred] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
+ clk[esdhc_a_podf] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
+ clk[esdhc_b_pred] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
+ clk[esdhc_b_podf] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
+ clk[esdhc_c_s] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+ clk[esdhc_d_s] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
+
+ clk[emi_sel] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
+ emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
+ clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3);
+ clk[nfc_podf] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3);
+ clk[ecspi_sel] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[ecspi_pred] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3);
+ clk[ecspi_podf] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6);
+ clk[usboh3_sel] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[usboh3_pred] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3);
+ clk[usboh3_podf] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2);
+ clk[usb_phy_pred] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3);
+ clk[usb_phy_podf] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
+ clk[usb_phy_sel] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
+ usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
+ clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
+ clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
+ clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
+ clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
+ clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
+ clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
+ clk[uart2_ipg_gate] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10);
+ clk[uart2_per_gate] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12);
+ clk[uart3_ipg_gate] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14);
+ clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
+ clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20);
+ clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
+ clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
+ clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
+ clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
+ clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
+ clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
+ clk[esdhc1_ipg_gate] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0);
+ clk[esdhc2_ipg_gate] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4);
+ clk[esdhc3_ipg_gate] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8);
+ clk[esdhc4_ipg_gate] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12);
+ clk[ssi1_ipg_gate] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16);
+ clk[ssi2_ipg_gate] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20);
+ clk[ssi3_ipg_gate] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24);
+ clk[ecspi1_ipg_gate] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18);
+ clk[ecspi1_per_gate] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20);
+ clk[ecspi2_ipg_gate] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22);
+ clk[ecspi2_per_gate] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24);
+ clk[cspi_ipg_gate] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30);
+ clk[emi_fast_gate] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14);
+ clk[emi_slow_gate] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16);
+ clk[ipu_s] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel));
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10);
+ clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
+ clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
+ clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+ clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
+ clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
+ clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
+ clk[uart4_ipg_gate] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8);
+ clk[uart4_per_gate] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10);
+ clk[uart5_ipg_gate] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12);
+ clk[uart5_per_gate] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14);
+ clk[gpc_dvfs] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24);
+
+ clk[ssi_apm] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels));
+ clk[ssi1_root_sel] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi2_root_sel] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi3_root_sel] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels));
+ clk[ssi_ext1_sel] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi_ext2_sel] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi_ext1_com_sel] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels));
+ clk[ssi_ext2_com_sel] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels));
+ clk[ssi1_root_pred] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3);
+ clk[ssi1_root_podf] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6);
+ clk[ssi2_root_pred] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3);
+ clk[ssi2_root_podf] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6);
+ clk[ssi_ext1_pred] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3);
+ clk[ssi_ext1_podf] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6);
+ clk[ssi_ext2_pred] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3);
+ clk[ssi_ext2_podf] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6);
+ clk[ssi1_root_gate] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18);
+ clk[ssi2_root_gate] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22);
+ clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
+ clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
+ clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX5 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_per_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_per_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_per_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_per_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[ecspi1_per_gate], "per", "imx51-ecspi.0");
+ clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0");
+ clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1");
+ clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1");
+ clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0");
+ clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
+ clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
+ clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL);
+ clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL);
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+ clk_register_clkdev(clk[cpu_podf], "cpu", NULL);
+ clk_register_clkdev(clk[iim_gate], "iim", NULL);
+ clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
+ clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
+ clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
+ clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
+ clk_set_parent(clk[esdhc_b_sel], clk[pll2_sw]);
+
+ /* move usb phy clk to 24MHz */
+ clk_set_parent(clk[usb_phy_sel], clk[osc]);
+
+ clk_prepare_enable(clk[gpc_dvfs]);
+ clk_prepare_enable(clk[ahb_max]); /* esdhc3 */
+ clk_prepare_enable(clk[aips_tz1]);
+ clk_prepare_enable(clk[aips_tz2]); /* fec */
+ clk_prepare_enable(clk[spba]);
+ clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+ clk_prepare_enable(clk[tmax1]);
+ clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
+ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
+}
+
+int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+ unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+ int i;
+
+ clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
+ clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
+ clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+ clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
+ clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
+ clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+ clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
+ clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
+ clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
+ clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
+ clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[usb_phy_gate] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0);
+ clk[hsi2c_gate] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22);
+ clk[mipi_hsc1_gate] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6);
+ clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
+ clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
+ clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX51 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+ clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
+ clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
+ clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+ clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
+ clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
+ clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
+ clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");
+ clk_register_clkdev(clk[ipu_gate], "hsp", "imx51-ipu");
+ clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0");
+ clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0");
+ clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx51.0");
+ clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx51.1");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.1");
+ clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx51.1");
+ clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx51.2");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.2");
+ clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx51.2");
+ clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3");
+ clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
+ clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
+
+ /* set the usboh3 parent to pll2_sw */
+ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
+
+ /* set SDHC root clock to 166.25MHZ*/
+ clk_set_rate(clk[esdhc_a_podf], 166250000);
+ clk_set_rate(clk[esdhc_b_podf], 166250000);
+
+ /* System timer */
+ mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+ MX51_INT_GPT);
+
+ clk_prepare_enable(clk[iim_gate]);
+ imx_print_silicon_rev("i.MX51", mx51_revision());
+ clk_disable_unprepare(clk[iim_gate]);
+
+ return 0;
+}
+
+int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+ unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+ int i;
+ unsigned long r;
+
+ clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
+ clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
+ clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+ clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+
+ clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+ mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
+ clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
+ clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
+ clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+ mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
+ clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
+ clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
+ clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
+ clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
+ clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+ clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
+ clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
+ clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
+ clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
+ clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
+ clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
+ clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
+ clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
+ clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX53 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+ clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
+ clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
+ clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
+ clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx53-ipu");
+ clk_register_clkdev(clk[ipu_gate], "hsp", "imx53-ipu");
+ clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0");
+ clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0");
+ clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx53.0");
+ clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx53.1");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.1");
+ clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx53.1");
+ clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx53.2");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.2");
+ clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx53.2");
+ clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3");
+ clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
+ clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+
+ /* set SDHC root clock to 200MHZ*/
+ clk_set_rate(clk[esdhc_a_podf], 200000000);
+ clk_set_rate(clk[esdhc_b_podf], 200000000);
+
+ /* System timer */
+ mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
+ MX53_INT_GPT);
+
+ clk_prepare_enable(clk[iim_gate]);
+ imx_print_silicon_rev("i.MX53", mx53_revision());
+ clk_disable_unprepare(clk[iim_gate]);
+
+ r = clk_round_rate(clk[usboh3_per_gate], 54000000);
+ clk_set_rate(clk[usboh3_per_gate], r);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+ unsigned long *ckih1, unsigned long *ckih2)
+{
+ struct device_node *np;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ *ckil = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ *osc = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ *ckih1 = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+ *ckih2 = rate;
+ }
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
new file mode 100644
index 0000000..cab02d0
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define CCGR0 0x68
+#define CCGR1 0x6c
+#define CCGR2 0x70
+#define CCGR3 0x74
+#define CCGR4 0x78
+#define CCGR5 0x7c
+#define CCGR6 0x80
+#define CCGR7 0x84
+
+#define CLPCR 0x54
+#define BP_CLPCR_LPM 0
+#define BM_CLPCR_LPM (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_VSTBY (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT 9
+#define BM_CLPCR_STBY_COUNT (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+
+static void __iomem *ccm_base;
+
+void __init imx6q_clock_map_io(void) { }
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+ u32 val = readl_relaxed(ccm_base + CLPCR);
+
+ val &= ~BM_CLPCR_LPM;
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val |= 0x1 << BP_CLPCR_LPM;
+ break;
+ case STOP_POWER_ON:
+ val |= 0x2 << BP_CLPCR_LPM;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ break;
+ case STOP_POWER_OFF:
+ val |= 0x2 << BP_CLPCR_LPM;
+ val |= 0x3 << BP_CLPCR_STBY_COUNT;
+ val |= BM_CLPCR_VSTBY;
+ val |= BM_CLPCR_SBYOS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel_relaxed(val, ccm_base + CLPCR);
+
+ return 0;
+}
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "axi", "ahb", };
+static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
+static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
+static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vdo_axi_sels[] = { "axi", "ahb", };
+static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
+ "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
+
+static const char * const clks_init_on[] __initconst = {
+ "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
+};
+
+enum mx6q_clks {
+ dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
+ pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
+ pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
+ periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
+ esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
+ gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
+ ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
+ ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
+ ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
+ usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
+ emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
+ periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
+ asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
+ gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
+ ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
+ ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
+ ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
+ usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
+ emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
+ mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
+ can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
+ esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
+ hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
+ ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
+ mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
+ gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
+ ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
+ usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
+ pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+ ssi2_ipg, ssi3_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx6q_clocks_init(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ struct clk *c;
+ int i, irq;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ clk[ckil] = imx_clk_fixed("ckil", rate);
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ clk[ckih] = imx_clk_fixed("ckih", rate);
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ clk[osc] = imx_clk_fixed("osc", rate);
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* type name parent_name base gate_mask div_mask */
+ clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x2000, 0x7f);
+ clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x2000, 0x1);
+ clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x2000, 0x3);
+ clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x2000, 0x7f);
+ clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x2000, 0x7f);
+ clk[pll6_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll6_mlb", "osc", base + 0xd0, 0x2000, 0x0);
+ clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
+ clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
+
+ /* name parent_name reg idx */
+ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clk[pll3_80m] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ ccm_base = base;
+
+ /* name reg shift width parent_names num_parents */
+ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
+ clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[spdif_sel] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[gpu2d_axi] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[gpu3d_axi] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[gpu2d_core_sel] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ clk[gpu3d_core_sel] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
+ clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+ clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
+ clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
+ clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels));
+ clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels));
+ clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels));
+ clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels));
+ clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
+ clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clk[ssi1_sel] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[ssi2_sel] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[ssi3_sel] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[usdhc1_sel] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[usdhc2_sel] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[usdhc3_sel] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
+ clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
+ clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+
+ /* name parent_name reg shift width */
+ clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clk[ipg_per] = imx_clk_divider("ipg_per", "ipg", base + 0x1c, 0, 6);
+ clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
+ clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
+ clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clk[can_root] = imx_clk_divider("can_root", "pll3_usb_otg", base + 0x20, 2, 6);
+ clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
+ clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
+ clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
+ clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
+ clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
+ clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1);
+ clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1);
+ clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
+ clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
+ clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+ clk[ipu2_di1_pre] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
+ clk[hsi_tx_podf] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
+ clk[ssi1_pred] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clk[ssi1_podf] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clk[ssi2_pred] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clk[ssi2_podf] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clk[ssi3_pred] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clk[ssi3_podf] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[usdhc1_podf] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clk[usdhc2_podf] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clk[usdhc3_podf] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
+ clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
+ clk[emi_podf] = imx_clk_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3);
+ clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3);
+ clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
+ clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+
+ /* name parent_name reg shift width busy: reg, shift */
+ clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
+ clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clk[arm] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+
+ /* name parent_name reg shift */
+ clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4);
+ clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
+ clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
+ clk[can2_ipg] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clk[can2_serial] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
+ clk[ecspi1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16);
+ clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
+ clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
+ clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+ clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
+ clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
+ clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[i2c1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
+ clk[i2c2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
+ clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
+ clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
+ clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
+ clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
+ clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
+ clk[ipu2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
+ clk[ipu2_di0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
+ clk[ldb_di0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
+ clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[mlb] = imx_clk_gate2("mlb", "pll6_mlb", base + 0x74, 18);
+ clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
+ clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
+ clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
+ clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
+ clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
+ clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
+ clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
+ clk[pwm4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
+ clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
+ clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
+ clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
+ clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clk[usdhc1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
+ clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX6q clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi");
+ clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi");
+ clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[twd], NULL, "smp_twd");
+ clk_register_clkdev(clk[usboh3], NULL, "usboh3");
+ clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
+ clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
+ clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
+ clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
+ clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
+ clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
+ clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
+ clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
+ clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
+ clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
+ clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
+ clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
+ clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
+ clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
+ clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
+ clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
+ clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
+ clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
+ clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+ clk_register_clkdev(clk[ahb], "ahb", NULL);
+ clk_register_clkdev(clk[cko1], "cko1", NULL);
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
+ c = clk_get_sys(clks_init_on[i], NULL);
+ if (IS_ERR(c)) {
+ pr_err("%s: failed to get clk %s", __func__,
+ clks_init_on[i]);
+ return PTR_ERR(c);
+ }
+ clk_prepare_enable(c);
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+ mxc_timer_init(NULL, base, irq);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-pfd.c b/arch/arm/mach-imx/clk-pfd.c
new file mode 100644
index 0000000..e2ed416
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pfd.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw: clock source
+ * @reg: PFD register address
+ * @idx: the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series. Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one. And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET 0x4
+#define CLR 0x8
+#define OTG 0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+ return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u64 tmp = *prate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+ tmp = *prate;
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+
+ writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+ writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+ .enable = clk_pfd_enable,
+ .disable = clk_pfd_disable,
+ .recalc_rate = clk_pfd_recalc_rate,
+ .round_rate = clk_pfd_round_rate,
+ .set_rate = clk_pfd_set_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_pfd *pfd;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+ if (!pfd)
+ return ERR_PTR(-ENOMEM);
+
+ pfd->reg = reg;
+ pfd->idx = idx;
+
+ init.name = name;
+ init.ops = &clk_pfd_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pfd->hw.init = &init;
+
+ clk = clk_register(NULL, &pfd->hw);
+ if (IS_ERR(clk))
+ kfree(pfd);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
new file mode 100644
index 0000000..2d856f9c
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -0,0 +1,66 @@
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+#include "clk.h"
+
+/**
+ * pll v1
+ *
+ * @clk_hw clock source
+ * @parent the parent clock name
+ * @base base address of pll registers
+ *
+ * PLL clock version 1, found on i.MX1/21/25/27/31/35
+ */
+struct clk_pllv1 {
+ struct clk_hw hw;
+ void __iomem *base;
+};
+
+#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
+
+static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv1 *pll = to_clk_pllv1(hw);
+
+ return mxc_decode_pll(readl(pll->base), parent_rate);
+}
+
+struct clk_ops clk_pllv1_ops = {
+ .recalc_rate = clk_pllv1_recalc_rate,
+};
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+ void __iomem *base)
+{
+ struct clk_pllv1 *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base = base;
+
+ init.name = name;
+ init.ops = &clk_pllv1_ops;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
new file mode 100644
index 0000000..4685919
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -0,0 +1,249 @@
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+
+#include "clk.h"
+
+#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_MFNMINUS 0x14
+#define MXC_PLL_DP_MFNPLUS 0x18
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+#define MXC_PLL_DP_MFN_TOGC 0x28
+#define MXC_PLL_DP_DESTAT 0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_CONFIG_BIST 0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
+#define MXC_PLL_DP_CONFIG_AREN 0x2
+#define MXC_PLL_DP_CONFIG_LDREQ 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0x0
+#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
+
+#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+
+struct clk_pllv2 {
+ struct clk_hw hw;
+ void __iomem *base;
+};
+
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+ void __iomem *pllbase;
+ s64 temp;
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ /* Sign extend to 32-bits */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xFC000000;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk = 2 * parent_rate;
+ if (dbl != 0)
+ ref_clk *= 2;
+
+ ref_clk /= (pdf + 1);
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+ long mfi, pdf, mfn, mfd = 999999;
+ s64 temp64;
+ unsigned long quad_parent_rate;
+ unsigned long pll_hfsm, dp_ctl;
+
+ pllbase = pll->base;
+
+ quad_parent_rate = 4 * parent_rate;
+ pdf = mfi = -1;
+ while (++pdf < 16 && mfi < 5)
+ mfi = rate * (pdf+1) / quad_parent_rate;
+ if (mfi > 15)
+ return -EINVAL;
+ pdf--;
+
+ temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate/1000000);
+ mfn = (long)temp64;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ /* use dpdck0_2 */
+ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+ } else {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ return 0;
+}
+
+static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return rate;
+}
+
+static int clk_pllv2_prepare(struct clk_hw *hw)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+ int i = 0;
+
+ pllbase = pll->base;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_LRF)
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: pll locking failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void clk_pllv2_unprepare(struct clk_hw *hw)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+
+ pllbase = pll->base;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+struct clk_ops clk_pllv2_ops = {
+ .prepare = clk_pllv2_prepare,
+ .unprepare = clk_pllv2_unprepare,
+ .recalc_rate = clk_pllv2_recalc_rate,
+ .round_rate = clk_pllv2_round_rate,
+ .set_rate = clk_pllv2_set_rate,
+};
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+ void __iomem *base)
+{
+ struct clk_pllv2 *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base = base;
+
+ init.name = name;
+ init.ops = &clk_pllv2_ops;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
new file mode 100644
index 0000000..36aac94
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -0,0 +1,419 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET 0x10
+#define PLL_DENOM_OFFSET 0x20
+
+#define BM_PLL_POWER (0x1 << 12)
+#define BM_PLL_ENABLE (0x1 << 13)
+#define BM_PLL_BYPASS (0x1 << 16)
+#define BM_PLL_LOCK (0x1 << 31)
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @clk_hw: clock source
+ * @base: base address of PLL registers
+ * @powerup_set: set POWER bit to power up the PLL
+ * @gate_mask: mask of gate bits
+ * @div_mask: mask of divider bits
+ *
+ * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+ struct clk_hw hw;
+ void __iomem *base;
+ bool powerup_set;
+ u32 gate_mask;
+ u32 div_mask;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val &= ~BM_PLL_BYPASS;
+ if (pll->powerup_set)
+ val |= BM_PLL_POWER;
+ else
+ val &= ~BM_PLL_POWER;
+ writel_relaxed(val, pll->base);
+
+ /* Wait for PLL to lock */
+ while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val |= BM_PLL_BYPASS;
+ if (pll->powerup_set)
+ val &= ~BM_PLL_POWER;
+ else
+ val |= BM_PLL_POWER;
+ writel_relaxed(val, pll->base);
+}
+
+static int clk_pllv3_enable(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val |= pll->gate_mask;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static void clk_pllv3_disable(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->gate_mask;
+ writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+
+ return (rate >= parent_rate * 22) ? parent_rate * 22 :
+ parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val, div;
+
+ if (rate == parent_rate * 22)
+ div = 1;
+ else if (rate == parent_rate * 20)
+ div = 0;
+ else
+ return -EINVAL;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_recalc_rate,
+ .round_rate = clk_pllv3_round_rate,
+ .set_rate = clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ unsigned long min_rate = parent_rate * 54 / 2;
+ unsigned long max_rate = parent_rate * 108 / 2;
+ u32 div;
+
+ if (rate > max_rate)
+ rate = max_rate;
+ else if (rate < min_rate)
+ rate = min_rate;
+ div = rate * 2 / parent_rate;
+
+ return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long min_rate = parent_rate * 54 / 2;
+ unsigned long max_rate = parent_rate * 108 / 2;
+ u32 val, div;
+
+ if (rate < min_rate || rate > max_rate)
+ return -EINVAL;
+
+ div = rate * 2 / parent_rate;
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_sys_recalc_rate,
+ .round_rate = clk_pllv3_sys_round_rate,
+ .set_rate = clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
+ u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ unsigned long min_rate = parent_rate * 27;
+ unsigned long max_rate = parent_rate * 54;
+ u32 div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate > max_rate)
+ rate = max_rate;
+ else if (rate < min_rate)
+ rate = min_rate;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ return parent_rate * div + parent_rate / mfd * mfn;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long min_rate = parent_rate * 27;
+ unsigned long max_rate = parent_rate * 54;
+ u32 val, div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate < min_rate || rate > max_rate)
+ return -EINVAL;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+ writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
+ writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_av_recalc_rate,
+ .round_rate = clk_pllv3_av_round_rate,
+ .set_rate = clk_pllv3_av_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ switch (div) {
+ case 0:
+ return 25000000;
+ case 1:
+ return 50000000;
+ case 2:
+ return 100000000;
+ case 3:
+ return 125000000;
+ }
+
+ return 0;
+}
+
+static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ if (rate >= 125000000)
+ rate = 125000000;
+ else if (rate >= 100000000)
+ rate = 100000000;
+ else if (rate >= 50000000)
+ rate = 50000000;
+ else
+ rate = 25000000;
+ return rate;
+}
+
+static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val, div;
+
+ switch (rate) {
+ case 25000000:
+ div = 0;
+ break;
+ case 50000000:
+ div = 1;
+ break;
+ case 100000000:
+ div = 2;
+ break;
+ case 125000000:
+ div = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_enet_recalc_rate,
+ .round_rate = clk_pllv3_enet_round_rate,
+ .set_rate = clk_pllv3_enet_set_rate,
+};
+
+static const struct clk_ops clk_pllv3_mlb_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 gate_mask, u32 div_mask)
+{
+ struct clk_pllv3 *pll;
+ const struct clk_ops *ops;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ switch (type) {
+ case IMX_PLLV3_SYS:
+ ops = &clk_pllv3_sys_ops;
+ break;
+ case IMX_PLLV3_USB:
+ ops = &clk_pllv3_ops;
+ pll->powerup_set = true;
+ break;
+ case IMX_PLLV3_AV:
+ ops = &clk_pllv3_av_ops;
+ break;
+ case IMX_PLLV3_ENET:
+ ops = &clk_pllv3_enet_ops;
+ break;
+ case IMX_PLLV3_MLB:
+ ops = &clk_pllv3_mlb_ops;
+ break;
+ default:
+ ops = &clk_pllv3_ops;
+ }
+ pll->base = base;
+ pll->gate_mask = gate_mask;
+ pll->div_mask = div_mask;
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
new file mode 100644
index 0000000..1bf64fe
--- /dev/null
+++ b/arch/arm/mach-imx/clk.h
@@ -0,0 +1,83 @@
+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/spinlock.h>
+#include <linux/clk-provider.h>
+#include <mach/clock.h>
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+ void __iomem *base);
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+ void __iomem *base);
+
+enum imx_pllv3_type {
+ IMX_PLLV3_GENERIC,
+ IMX_PLLV3_SYS,
+ IMX_PLLV3_USB,
+ IMX_PLLV3_AV,
+ IMX_PLLV3_ENET,
+ IMX_PLLV3_MLB,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base, u32 gate_mask,
+ u32 div_mask);
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift);
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ const char **parent_names, int num_parents);
+
+static inline struct clk *imx_clk_fixed(const char *name, int rate)
+{
+ return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents, int num_parents)
+{
+ return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+ width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+ const char *parent, unsigned int mult, unsigned int div)
+{
+ return clk_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
deleted file mode 100644
index 4aabeb2..0000000
--- a/arch/arm/mach-imx/clock-imx1.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-/* CCM register addresses */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_PCDR IO_ADDR_CCM(0x20)
-
-#define CCM_CSCR_CLKO_OFFSET 29
-#define CCM_CSCR_CLKO_MASK (0x7 << 29)
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << 26)
-#define CCM_CSCR_OSC_EN_SHIFT 17
-#define CCM_CSCR_SYSTEM_SEL (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xf << 10)
-#define CCM_CSCR_PRESC (1 << 15)
-
-#define CCM_PCDR_PCLK3_OFFSET 16
-#define CCM_PCDR_PCLK3_MASK (0x7f << 16)
-#define CCM_PCDR_PCLK2_OFFSET 4
-#define CCM_PCDR_PCLK2_MASK (0xf << 4)
-#define CCM_PCDR_PCLK1_OFFSET 0
-#define CCM_PCDR_PCLK1_MASK 0xf
-
-#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-/* SCM register addresses */
-#define SCM_GCCR IO_ADDR_SCM(0xc)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET 3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET 2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET 1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET 0
-
-static int _clk_enable(struct clk *clk)
-{
- unsigned int reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
- unsigned int reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
- struct clk *parent)
-{
- int i;
-
- for (i = 0; i < size; i++)
- if (parent == clk_arr[i])
- return i;
-
- return -EINVAL;
-}
-
-static unsigned long
-_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
-{
- int div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > limit)
- div = limit;
-
- return parent_rate / div;
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long clk16m_get_rate(struct clk *clk)
-{
- return 16000000;
-}
-
-static struct clk clk16m = {
- .get_rate = clk16m_get_rate,
- .enable = _clk_enable,
- .enable_reg = CCM_CSCR,
- .enable_shift = CCM_CSCR_OSC_EN_SHIFT,
- .disable = _clk_disable,
-};
-
-/* in Hz */
-static unsigned long clk32_rate;
-
-static unsigned long clk32_get_rate(struct clk *clk)
-{
- return clk32_rate;
-}
-
-static struct clk clk32 = {
- .get_rate = clk32_get_rate,
-};
-
-static unsigned long clk32_premult_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) * 512;
-}
-
-static struct clk clk32_premult = {
- .parent = &clk32,
- .get_rate = clk32_premult_get_rate,
-};
-
-static const struct clk *prem_clk_clocks[] = {
- &clk32_premult,
- &clk16m,
-};
-
-static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int i;
- unsigned int reg = __raw_readl(CCM_CSCR);
-
- i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
- parent);
-
- switch (i) {
- case 0:
- reg &= ~CCM_CSCR_SYSTEM_SEL;
- break;
- case 1:
- reg |= CCM_CSCR_SYSTEM_SEL;
- break;
- default:
- return i;
- }
-
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static struct clk prem_clk = {
- .set_parent = prem_clk_set_parent,
-};
-
-static unsigned long system_clk_get_rate(struct clk *clk)
-{
- return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
- clk_get_rate(clk->parent));
-}
-
-static struct clk system_clk = {
- .parent = &prem_clk,
- .get_rate = system_clk_get_rate,
-};
-
-static unsigned long mcu_clk_get_rate(struct clk *clk)
-{
- return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
- clk_get_rate(clk->parent));
-}
-
-static struct clk mcu_clk = {
- .parent = &clk32_premult,
- .get_rate = mcu_clk_get_rate,
-};
-
-static unsigned long fclk_get_rate(struct clk *clk)
-{
- unsigned long fclk = clk_get_rate(clk->parent);
-
- if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
- fclk /= 2;
-
- return fclk;
-}
-
-static struct clk fclk = {
- .parent = &mcu_clk,
- .get_rate = fclk_get_rate,
-};
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long hclk_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
- CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
-}
-
-static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int hclk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 16 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_BCLK_MASK;
- reg |= div << CCM_CSCR_BCLK_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static struct clk hclk = {
- .parent = &system_clk,
- .get_rate = hclk_get_rate,
- .round_rate = hclk_round_rate,
- .set_rate = hclk_set_rate,
-};
-
-static unsigned long clk48m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
- CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
-}
-
-static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 8);
-}
-
-static int clk48m_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_USB_MASK;
- reg |= div << CCM_CSCR_USB_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static struct clk clk48m = {
- .parent = &system_clk,
- .get_rate = clk48m_get_rate,
- .round_rate = clk48m_round_rate,
- .set_rate = clk48m_set_rate,
-};
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long perclk1_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
- CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
-}
-
-static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk1_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 16 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_PCDR);
- reg &= ~CCM_PCDR_PCLK1_MASK;
- reg |= div << CCM_PCDR_PCLK1_OFFSET;
- __raw_writel(reg, CCM_PCDR);
-
- return 0;
-}
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long perclk2_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
- CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
-}
-
-static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk2_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 16 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_PCDR);
- reg &= ~CCM_PCDR_PCLK2_MASK;
- reg |= div << CCM_PCDR_PCLK2_OFFSET;
- __raw_writel(reg, CCM_PCDR);
-
- return 0;
-}
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-static unsigned long perclk3_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
- CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
-}
-
-static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 128);
-}
-
-static int perclk3_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 128 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_PCDR);
- reg &= ~CCM_PCDR_PCLK3_MASK;
- reg |= div << CCM_PCDR_PCLK3_OFFSET;
- __raw_writel(reg, CCM_PCDR);
-
- return 0;
-}
-
-static struct clk perclk[] = {
- {
- .id = 0,
- .parent = &system_clk,
- .get_rate = perclk1_get_rate,
- .round_rate = perclk1_round_rate,
- .set_rate = perclk1_set_rate,
- }, {
- .id = 1,
- .parent = &system_clk,
- .get_rate = perclk2_get_rate,
- .round_rate = perclk2_round_rate,
- .set_rate = perclk2_set_rate,
- }, {
- .id = 2,
- .parent = &system_clk,
- .get_rate = perclk3_get_rate,
- .round_rate = perclk3_round_rate,
- .set_rate = perclk3_set_rate,
- }
-};
-
-static const struct clk *clko_clocks[] = {
- &perclk[0],
- &hclk,
- &clk48m,
- &clk16m,
- &prem_clk,
- &fclk,
-};
-
-static int clko_set_parent(struct clk *clk, struct clk *parent)
-{
- int i;
- unsigned int reg;
-
- i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
- if (i < 0)
- return i;
-
- reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
- reg |= i << CCM_CSCR_CLKO_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
- clk->set_rate = _clk_parent_set_rate;
- clk->round_rate = _clk_parent_round_rate;
- } else {
- clk->set_rate = NULL;
- clk->round_rate = NULL;
- }
-
- return 0;
-}
-
-static struct clk clko_clk = {
- .set_parent = clko_set_parent,
-};
-
-static struct clk dma_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk csi_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mma_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk usbd_clk = {
- .parent = &clk48m,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk gpt_clk = {
- .parent = &perclk[0],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk uart_clk = {
- .parent = &perclk[0],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk i2c_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk spi_clk = {
- .parent = &perclk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk sdhc_clk = {
- .parent = &perclk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk lcdc_clk = {
- .parent = &perclk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk mshc_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk ssi_clk = {
- .parent = &perclk[2],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk rtc_clk = {
- .parent = &clk32,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-static struct clk_lookup lookups[] __initdata = {
- _REGISTER_CLOCK(NULL, "dma", dma_clk)
- _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "mma", mma_clk)
- _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
- _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
- _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
- _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
- _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
- _REGISTER_CLOCK(NULL, "ssi", ssi_clk)
- _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
-};
-
-int __init mx1_clocks_init(unsigned long fref)
-{
- unsigned int reg;
-
- /* disable clocks we are able to */
- __raw_writel(0, SCM_GCCR);
-
- clk32_rate = fref;
- reg = __raw_readl(CCM_CSCR);
-
- /* detect clock reference for system PLL */
- if (reg & CCM_CSCR_SYSTEM_SEL) {
- prem_clk.parent = &clk16m;
- } else {
- /* ensure that oscillator is disabled */
- reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
- __raw_writel(reg, CCM_CSCR);
- prem_clk.parent = &clk32_premult;
- }
-
- /* detect reference for CLKO */
- reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
- clko_clk.parent = (struct clk *)clko_clocks[reg];
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- clk_enable(&hclk);
- clk_enable(&fclk);
-
- mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
deleted file mode 100644
index ee15d8c..0000000
--- a/arch/arm/mach-imx/clock-imx21.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/div64.h>
-
-#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_PRESC_OFFSET 29
-#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET 24
-#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES (1 << 22)
-#define CCM_CSCR_MPLLRES (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET 20
-#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET 19
-#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET 18
-#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET 9
-#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN 1
-
-#define CCM_MPCTL0_CPLM (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET 26
-#define CCM_MPCTL0_PD_MASK (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET 16
-#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET 10
-#define CCM_MPCTL0_MFI_MASK (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET 0
-#define CCM_MPCTL0_MFN_MASK 0x3ff
-
-#define CCM_MPCTL1_LF (1 << 15)
-#define CCM_MPCTL1_BRMO (1 << 6)
-
-#define CCM_SPCTL0_CPLM (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET 26
-#define CCM_SPCTL0_PD_MASK (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET 16
-#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET 10
-#define CCM_SPCTL0_MFI_MASK (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET 0
-#define CCM_SPCTL0_MFN_MASK 0x3ff
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET 16
-#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET 8
-#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET 0
-#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET 12
-#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET 5
-#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET 0
-#define CCM_PCDR0_FIRIDIV_MASK 0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET 24
-#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET 16
-#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET 8
-#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET 0
-#define CCM_PCDR1_PERDIV1_MASK 0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET 31
-#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET 30
-#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET 28
-#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET 27
-#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET 26
-#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
-#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
-#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET 23
-#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET 22
-#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET 21
-#define CCM_PCCR_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET 20
-#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET 19
-#define CCM_PCCR_NFC_REG CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET 18
-#define CCM_PCCR_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET 17
-#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET 16
-#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET 15
-#define CCM_PCCR_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET 14
-#define CCM_PCCR_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET 13
-#define CCM_PCCR_DMA_REG CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET 12
-#define CCM_PCCR_I2C1_REG CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET 11
-#define CCM_PCCR_GPIO_REG CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET 10
-#define CCM_PCCR_SDHC2_REG CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET 9
-#define CCM_PCCR_SDHC1_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET 8
-#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET 7
-#define CCM_PCCR_SSI2_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET 6
-#define CCM_PCCR_SSI1_REG CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET 5
-#define CCM_PCCR_CSPI2_REG CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET 4
-#define CCM_PCCR_CSPI1_REG CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET 3
-#define CCM_PCCR_UART4_REG CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET 2
-#define CCM_PCCR_UART3_REG CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET 1
-#define CCM_PCCR_UART2_REG CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET 0
-#define CCM_PCCR_UART1_REG CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET 31
-#define CCM_PCCR_OWIRE_REG CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET 30
-#define CCM_PCCR_KPP_REG CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET 29
-#define CCM_PCCR_RTC_REG CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET 28
-#define CCM_PCCR_PWM_REG CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET 27
-#define CCM_PCCR_GPT3_REG CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET 26
-#define CCM_PCCR_GPT2_REG CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET 25
-#define CCM_PCCR_GPT1_REG CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET 24
-#define CCM_PCCR_WDT_REG CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET 23
-#define CCM_PCCR_CSPI3_REG CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
-
-#define CCM_CCSR_32KSR (1 << 15)
-
-#define CCM_CCSR_CLKMODE1 (1 << 9)
-#define CCM_CCSR_CLKMODE0 (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK 0x1f
-
-#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
-#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
-
-static int _clk_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
- return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long _clk_generic_round_rate(struct clk *clk,
- unsigned long rate,
- u32 max_divisor)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > max_divisor)
- div = max_divisor;
-
- return parent_rate / div;
-}
-
-static int _clk_spll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg |= CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-
- while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
- ;
- return 0;
-}
-
-static void _clk_spll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-}
-
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
- unsigned long rate)
-{
- return _clk_generic_round_rate(clk, rate, 64);
-}
-
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return -EINVAL;
-
- div = parent_rate / rate;
- if (div > 64 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg =
- __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
- (clk->id << 3));
- reg |= div << (clk->id << 3);
- __raw_writel(reg, CCM_PCDR1);
-
- return 0;
-}
-
-static unsigned long _clk_usb_recalc(struct clk *clk)
-{
- unsigned long usb_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
-
- return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long _clk_usb_round_rate(struct clk *clk,
- unsigned long rate)
-{
- return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = CSCR() & ~CCM_CSCR_USB_MASK;
- reg |= div << CCM_CSCR_USB_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
-{
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
-
- return 2UL * parent_rate / pdf;
-}
-
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
-{
- return _clk_ssix_recalc(clk,
- (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
- >> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
-{
- return _clk_ssix_recalc(clk,
- (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
- CCM_PCDR0_SSI2BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_nfc_recalc(struct clk *clk)
-{
- unsigned long nfc_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
- >> CCM_PCDR0_NFCDIV_OFFSET;
-
- return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long external_high_reference; /* in Hz */
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz.
- */
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static unsigned long external_low_reference; /* in Hz */
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-
-static unsigned long _clk_fpm_recalc(struct clk *clk)
-{
- return clk_get_rate(clk->parent) * 512;
-}
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
- .parent = &ckil_clk,
- .get_rate = _clk_fpm_recalc,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
-{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_MPCTL0);
- pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
- mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_fclk_get_rate(struct clk *clk)
-{
- unsigned long parent_rate;
- u32 div;
-
- div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
- parent_rate = clk_get_rate(clk->parent);
-
- return parent_rate / (div+1);
-}
-
-static struct clk fclk_clk = {
- .parent = &mpll_clk,
- .get_rate = _clk_fclk_get_rate
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
-{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_SPCTL0);
- pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
- mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_spll_clk,
- .enable = _clk_spll_enable,
- .disable = _clk_spll_disable,
-};
-
-static unsigned long get_hclk_clk(struct clk *clk)
-{
- unsigned long rate;
- unsigned long bclk_pdf;
-
- bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
- >> CCM_CSCR_BCLK_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (bclk_pdf + 1);
-}
-
-static struct clk hclk_clk = {
- .parent = &fclk_clk,
- .get_rate = get_hclk_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
- unsigned long rate;
- unsigned long ipg_pdf;
-
- ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
- .parent = &hclk_clk,
- .get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
- unsigned long perclk_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return 0;
-
- perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
- return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
- {
- .id = 0,
- .parent = &mpll_clk,
- .get_rate = _clk_perclkx_recalc,
- }, {
- .id = 1,
- .parent = &mpll_clk,
- .get_rate = _clk_perclkx_recalc,
- }, {
- .id = 2,
- .parent = &mpll_clk,
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- /* Enable/Disable done via lcd_clkc[1] */
- }, {
- .id = 3,
- .parent = &mpll_clk,
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- /* Enable/Disable done via csi_clk[1] */
- },
-};
-
-static struct clk uart_ipg_clk[];
-
-static struct clk uart_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[1],
- }, {
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[2],
- }, {
- .id = 3,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[3],
- },
-};
-
-static struct clk uart_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART1_REG,
- .enable_shift = CCM_PCCR_UART1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART2_REG,
- .enable_shift = CCM_PCCR_UART2_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART3_REG,
- .enable_shift = CCM_PCCR_UART3_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART4_REG,
- .enable_shift = CCM_PCCR_UART4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt_ipg_clk[];
-
-static struct clk gpt_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &gpt_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &gpt_ipg_clk[1],
- }, {
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &gpt_ipg_clk[2],
- },
-};
-
-static struct clk gpt_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPT1_REG,
- .enable_shift = CCM_PCCR_GPT1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPT2_REG,
- .enable_shift = CCM_PCCR_GPT2_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPT3_REG,
- .enable_shift = CCM_PCCR_GPT3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk pwm_clk[] = {
- {
- .parent = &per_clk[0],
- .secondary = &pwm_clk[1],
- }, {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_PWM_REG,
- .enable_shift = CCM_PCCR_PWM_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk sdhc_ipg_clk[];
-
-static struct clk sdhc_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &sdhc_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &sdhc_ipg_clk[1],
- },
-};
-
-static struct clk sdhc_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SDHC1_REG,
- .enable_shift = CCM_PCCR_SDHC1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SDHC2_REG,
- .enable_shift = CCM_PCCR_SDHC2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk cspi_ipg_clk[];
-
-static struct clk cspi_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &cspi_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &cspi_ipg_clk[1],
- }, {
- .id = 2,
- .parent = &per_clk[1],
- .secondary = &cspi_ipg_clk[2],
- },
-};
-
-static struct clk cspi_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_CSPI1_REG,
- .enable_shift = CCM_PCCR_CSPI1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_CSPI2_REG,
- .enable_shift = CCM_PCCR_CSPI2_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_CSPI3_REG,
- .enable_shift = CCM_PCCR_CSPI3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk lcdc_clk[] = {
- {
- .parent = &per_clk[2],
- .secondary = &lcdc_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .parent = &ipg_clk,
- .secondary = &lcdc_clk[2],
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_LCDC_REG,
- .enable_shift = CCM_PCCR_LCDC_OFFSET,
- .disable = _clk_disable,
- }, {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_LCDC_REG,
- .enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk csi_clk[] = {
- {
- .parent = &per_clk[3],
- .secondary = &csi_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_CSI_REG,
- .enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk usb_clk[] = {
- {
- .parent = &spll_clk,
- .secondary = &usb_clk[1],
- .get_rate = _clk_usb_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_USBOTG_REG,
- .enable_shift = CCM_PCCR_USBOTG_OFFSET,
- .disable = _clk_disable,
- .round_rate = _clk_usb_round_rate,
- .set_rate = _clk_usb_set_rate,
- }, {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
- .enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
- .disable = _clk_disable,
- }
-};
-
-static struct clk ssi_ipg_clk[];
-
-static struct clk ssi_clk[] = {
- {
- .id = 0,
- .parent = &mpll_clk,
- .secondary = &ssi_ipg_clk[0],
- .get_rate = _clk_ssi1_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI1_BAUD_REG,
- .enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &mpll_clk,
- .secondary = &ssi_ipg_clk[1],
- .get_rate = _clk_ssi2_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI2_BAUD_REG,
- .enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk ssi_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI1_REG,
- .enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI2_REG,
- .enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-
-static struct clk nfc_clk = {
- .parent = &fclk_clk,
- .get_rate = _clk_nfc_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_NFC_REG,
- .enable_shift = CCM_PCCR_NFC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk dma_clk[] = {
- {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_DMA_REG,
- .enable_shift = CCM_PCCR_DMA_OFFSET,
- .disable = _clk_disable,
- .secondary = &dma_clk[1],
- }, {
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_DMA_REG,
- .enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk brom_clk = {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_BROM_REG,
- .enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk emma_clk[] = {
- {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_EMMA_REG,
- .enable_shift = CCM_PCCR_EMMA_OFFSET,
- .disable = _clk_disable,
- .secondary = &emma_clk[1],
- }, {
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_EMMA_REG,
- .enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
- .disable = _clk_disable,
- }
-};
-
-static struct clk slcdc_clk[] = {
- {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SLCDC_REG,
- .enable_shift = CCM_PCCR_SLCDC_OFFSET,
- .disable = _clk_disable,
- .secondary = &slcdc_clk[1],
- }, {
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
- .enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
- .disable = _clk_disable,
- }
-};
-
-static struct clk wdog_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_WDT_REG,
- .enable_shift = CCM_PCCR_WDT_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPIO_REG,
- .enable_shift = CCM_PCCR_GPIO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk i2c_clk = {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_I2C1_REG,
- .enable_shift = CCM_PCCR_I2C1_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_KPP_REG,
- .enable_shift = CCM_PCCR_KPP_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_OWIRE_REG,
- .enable_shift = CCM_PCCR_OWIRE_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_RTC_REG,
- .enable_shift = CCM_PCCR_RTC_OFFSET,
- .disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = __raw_readl(CCM_PCDR0);
-
- if (clk->parent == &usb_clk[0]) {
- reg &= ~CCM_PCDR0_48MDIV_MASK;
- reg |= div << CCM_PCDR0_48MDIV_OFFSET;
- }
- __raw_writel(reg, CCM_PCDR0);
-
- return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
- u32 div = 0;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->parent == &usb_clk[0]) /* 48M */
- div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
- >> CCM_PCDR0_48MDIV_OFFSET;
- div++;
-
- return parent_rate / div;
-}
-
-static struct clk clko_clk;
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
- if (parent == &ckil_clk)
- reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &fpm_clk)
- reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ckih_clk)
- reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == mpll_clk.parent)
- reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == spll_clk.parent)
- reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &mpll_clk)
- reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &spll_clk)
- reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &fclk_clk)
- reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &hclk_clk)
- reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ipg_clk)
- reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[0])
- reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[1])
- reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[2])
- reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[3])
- reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi_clk[0])
- reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi_clk[1])
- reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &nfc_clk)
- reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &usb_clk[0])
- reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &clko_clk)
- reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
- else
- return -EINVAL;
-
- __raw_writel(reg, CCM_CCSR);
-
- return 0;
-}
-
-static struct clk clko_clk = {
- .get_rate = _clk_clko_recalc,
- .set_rate = _clk_clko_set_rate,
- .round_rate = _clk_clko_round_rate,
- .set_parent = _clk_clko_set_parent,
-};
-
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-static struct clk_lookup lookups[] = {
-/* It's unlikely that any driver wants one of them directly:
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
- _REGISTER_CLOCK(NULL, "ckil", ckil_clk)
- _REGISTER_CLOCK(NULL, "fpm", fpm_clk)
- _REGISTER_CLOCK(NULL, "mpll", mpll_clk)
- _REGISTER_CLOCK(NULL, "spll", spll_clk)
- _REGISTER_CLOCK(NULL, "fclk", fclk_clk)
- _REGISTER_CLOCK(NULL, "hclk", hclk_clk)
- _REGISTER_CLOCK(NULL, "ipg", ipg_clk)
-*/
- _REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
- _REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
- _REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
- _REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
- _REGISTER_CLOCK(NULL, "clko", clko_clk)
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0])
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1])
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2])
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3])
- _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
- _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
- _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
- _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
- _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
- _REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
- _REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
- _REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
- _REGISTER_CLOCK(NULL, "csi", csi_clk[0])
- _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
- _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
- _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK(NULL, "dma", dma_clk[0])
- _REGISTER_CLOCK(NULL, "brom", brom_clk)
- _REGISTER_CLOCK(NULL, "emma", emma_clk[0])
- _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
- _REGISTER_CLOCK(NULL, "owire", owire_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-};
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
- u32 cscr;
-
- external_low_reference = lref;
- external_high_reference = href;
-
- /* detect clock reference for both system PLL */
- cscr = CSCR();
- if (cscr & CCM_CSCR_MCU)
- mpll_clk.parent = &ckih_clk;
- else
- mpll_clk.parent = &fpm_clk;
-
- if (cscr & CCM_CSCR_SP)
- spll_clk.parent = &ckih_clk;
- else
- spll_clk.parent = &fpm_clk;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clock gates */
- __raw_writel(0, CCM_PCCR0);
- __raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
-
- /* This turns of the serial PLL as well */
- spll_clk.disable(&spll_clk);
-
- /* This will propagate to all children and init all the clock rates. */
- clk_enable(&per_clk[0]);
- clk_enable(&gpio_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart_clk[0]);
-#endif
-
- mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
deleted file mode 100644
index b0fec74c..0000000
--- a/arch/arm/mach-imx/clock-imx25.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-
-#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
-#define CCM_MPCTL 0x00
-#define CCM_UPCTL 0x04
-#define CCM_CCTL 0x08
-#define CCM_CGCR0 0x0C
-#define CCM_CGCR1 0x10
-#define CCM_CGCR2 0x14
-#define CCM_PCDR0 0x18
-#define CCM_PCDR1 0x1C
-#define CCM_PCDR2 0x20
-#define CCM_PCDR3 0x24
-#define CCM_RCSR 0x28
-#define CCM_CRDR 0x2C
-#define CCM_DCVR0 0x30
-#define CCM_DCVR1 0x34
-#define CCM_DCVR2 0x38
-#define CCM_DCVR3 0x3c
-#define CCM_LTR0 0x40
-#define CCM_LTR1 0x44
-#define CCM_LTR2 0x48
-#define CCM_LTR3 0x4c
-
-static unsigned long get_rate_mpll(void)
-{
- ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_upll(void)
-{
- ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-unsigned long get_rate_arm(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
- unsigned long rate = get_rate_mpll();
-
- if (cctl & (1 << 14))
- rate = (rate * 3) >> 2;
-
- return rate / ((cctl >> 30) + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-
- return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_per(int per)
-{
- unsigned long ofs = (per & 0x3) * 8;
- unsigned long reg = per & ~0x3;
- unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
- unsigned long fref;
-
- if (readl(CRM_BASE + 0x64) & (1 << per))
- fref = get_rate_upll();
- else
- fref = get_rate_ahb(NULL);
-
- return fref / (val + 1);
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
- return get_rate_per(15);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
- return get_rate_per(14);
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
- return get_rate_per(13);
-}
-
-static unsigned long get_rate_i2c(struct clk *clk)
-{
- return get_rate_per(6);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- return get_rate_per(8);
-}
-
-static unsigned long get_rate_gpt(struct clk *clk)
-{
- return get_rate_per(5);
-}
-
-static unsigned long get_rate_lcdc(struct clk *clk)
-{
- return get_rate_per(7);
-}
-
-static unsigned long get_rate_esdhc1(struct clk *clk)
-{
- return get_rate_per(3);
-}
-
-static unsigned long get_rate_esdhc2(struct clk *clk)
-{
- return get_rate_per(4);
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
- return get_rate_per(0);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
- unsigned long rate = get_rate_upll();
-
- return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
-}
-
-static int clk_cgcr_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_cgcr_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = CRM_BASE + er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = clk_cgcr_enable, \
- .disable = clk_cgcr_disable, \
- .secondary = s, \
- }
-
-/*
- * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
- * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
- * taken from the Freescale released BSP.
- *
- * bit reg offset clock
- *
- * 0 CGCR1 0 AUDMUX
- * 12 CGCR1 12 ESAI
- * 16 CGCR1 16 GPIO1
- * 17 CGCR1 17 GPIO2
- * 18 CGCR1 18 GPIO3
- * 23 CGCR1 23 I2C1
- * 24 CGCR1 24 I2C2
- * 25 CGCR1 25 I2C3
- * 27 CGCR1 27 IOMUXC
- * 28 CGCR1 28 KPP
- * 30 CGCR1 30 OWIRE
- * 36 CGCR2 4 RTIC
- * 51 CGCR2 19 WDOG
- */
-
-DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
-DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
-DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL);
-DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL,
- &esdhc1_ahb_clk);
-DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL);
-DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL,
- &esdhc2_ahb_clk);
-DEFINE_CLOCK(sdma_ahb_clk, 0, CCM_CGCR0, 26, NULL, NULL, NULL);
-DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
-DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
-DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
-DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
-DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
-DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
-DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
-DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
-DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
-DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
-DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
-DEFINE_CLOCK(sdma_clk, 0, CCM_CGCR2, 6, get_rate_ipg, NULL, &sdma_ahb_clk);
-DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
- &esdhc1_per_clk);
-DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
- &esdhc2_per_clk);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
-DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
-DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(iim_clk, 0, CCM_CGCR1, 26, NULL, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- /* i.mx25 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- /* i.mx25 has the i.mx35 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
- _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
- _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
- _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
- _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
- _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
- _REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
- _REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
- /* i.mx25 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
-};
-
-int __init mx25_clocks_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks except the ones we need to survive, namely:
- * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
- * SCC
- */
- __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
- __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
- __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart1_clk);
-#endif
-
- /* Clock source for lcdc and csi is upll */
- __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
- CRM_BASE + 0x64);
-
- /* Clock source for gpt is ahb_div */
- __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX25", mx25_revision());
- clk_disable(&iim_clk);
-
- mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
deleted file mode 100644
index 98e04f5..0000000
--- a/arch/arm/mach-imx/clock-imx27.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS (1 << 31)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC (1 << 15)
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
-
-static struct clk mpll_main1_clk, mpll_main2_clk;
-
-static int clk_pccr_enable(struct clk *clk)
-{
- unsigned long reg;
-
- if (!clk->enable_reg)
- return 0;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_pccr_disable(struct clk *clk)
-{
- unsigned long reg;
-
- if (!clk->enable_reg)
- return;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int clk_spll_enable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg |= CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-
- while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
-
- return 0;
-}
-
-static void clk_spll_disable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-}
-
-static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
- int cscr = __raw_readl(CCM_CSCR);
-
- if (clk->parent == parent)
- return 0;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- if (parent == &mpll_main1_clk) {
- cscr |= CCM_CSCR_ARM_SRC;
- } else {
- if (parent == &mpll_main2_clk)
- cscr &= ~CCM_CSCR_ARM_SRC;
- else
- return -EINVAL;
- }
- __raw_writel(cscr, CCM_CSCR);
- clk->parent = parent;
- return 0;
- }
- return -ENODEV;
-}
-
-static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
-{
- int div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 4)
- div = 4;
-
- return parent_rate / div;
-}
-
-static int set_rate_cpu(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- uint32_t reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 4 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_CSCR);
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- reg &= ~(3 << 12);
- reg |= div << 12;
- reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
- __raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
- } else {
- printk(KERN_ERR "Can't set CPU frequency!\n");
- }
-
- return 0;
-}
-
-static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 64)
- div = 64;
-
- return parent_rate / div;
-}
-
-static int set_rate_per(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return -EINVAL;
-
- div = parent_rate / rate;
- if (div > 64 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
- reg |= div << (clk->id << 3);
- __raw_writel(reg, CCM_PCDR1);
-
- return 0;
-}
-
-static unsigned long get_rate_usb(struct clk *clk)
-{
- unsigned long usb_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
-
- return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
-{
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- pdf += 4; /* MX27 TO2+ */
- else
- pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
-
- return 2UL * parent_rate / pdf;
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
- return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
- return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- unsigned long nfc_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
- else
- nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
-
- return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long get_rate_vpu(struct clk *clk)
-{
- unsigned long vpu_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
- vpu_pdf += 4;
- } else {
- vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
- vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
- }
-
- return 2UL * parent_rate / vpu_pdf;
-}
-
-static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
-{
- return clk->parent->round_rate(clk->parent, rate);
-}
-
-static unsigned long get_rate_parent(struct clk *clk)
-{
- return clk_get_rate(clk->parent);
-}
-
-static int set_rate_parent(struct clk *clk, unsigned long rate)
-{
- return clk->parent->set_rate(clk->parent, rate);
-}
-
-/* in Hz */
-static unsigned long external_high_reference = 26000000;
-
-static unsigned long get_rate_high_reference(struct clk *clk)
-{
- return external_high_reference;
-}
-
-/* in Hz */
-static unsigned long external_low_reference = 32768;
-
-static unsigned long get_rate_low_reference(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static unsigned long get_rate_fpm(struct clk *clk)
-{
- return clk_get_rate(clk->parent) * 1024;
-}
-
-static unsigned long get_rate_mpll(struct clk *clk)
-{
- return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
- clk_get_rate(clk->parent));
-}
-
-static unsigned long get_rate_mpll_main(struct clk *clk)
-{
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- /* i.MX27 TO2:
- * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
- * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
- */
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
- return 2UL * parent_rate / 3UL;
-
- return parent_rate;
-}
-
-static unsigned long get_rate_spll(struct clk *clk)
-{
- uint32_t reg;
- unsigned long rate;
-
- rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_SPCTL0);
-
- /* On TO2 we have to write the value back. Otherwise we
- * read 0 from this register the next time.
- */
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- __raw_writel(reg, CCM_SPCTL0);
-
- return mxc_decode_pll(reg, rate);
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
- u32 div;
- unsigned long rate;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
- else
- div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
-
- rate = clk_get_rate(clk->parent);
- return rate / (div + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long rate, bclk_pdf;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
- else
- bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
-
- rate = clk_get_rate(clk->parent);
- return rate / (bclk_pdf + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- unsigned long rate, ipg_pdf;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- return clk_get_rate(clk->parent);
- else
- ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
-
- rate = clk_get_rate(clk->parent);
- return rate / (ipg_pdf + 1);
-}
-
-static unsigned long get_rate_per(struct clk *clk)
-{
- unsigned long perclk_pdf, parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return 0;
-
- perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
-
- return parent_rate / (perclk_pdf + 1);
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
- .get_rate = get_rate_high_reference,
-};
-
-static struct clk mpll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_rate_mpll,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provides the clock source whose rate is same as MPLL
- */
-static struct clk mpll_main1_clk = {
- .id = 0,
- .parent = &mpll_clk,
- .get_rate = get_rate_mpll_main,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provides the clock source whose rate is same MPLL * 2 / 3
- */
-static struct clk mpll_main2_clk = {
- .id = 1,
- .parent = &mpll_clk,
- .get_rate = get_rate_mpll_main,
-};
-
-static struct clk ahb_clk = {
- .parent = &mpll_main2_clk,
- .get_rate = get_rate_ahb,
-};
-
-static struct clk ipg_clk = {
- .parent = &ahb_clk,
- .get_rate = get_rate_ipg,
-};
-
-static struct clk cpu_clk = {
- .parent = &mpll_main2_clk,
- .set_parent = clk_cpu_set_parent,
- .round_rate = round_rate_cpu,
- .get_rate = get_rate_cpu,
- .set_rate = set_rate_cpu,
-};
-
-static struct clk spll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_rate_spll,
- .enable = clk_spll_enable,
- .disable = clk_spll_disable,
-};
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
- .get_rate = get_rate_low_reference,
-};
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
- .parent = &ckil_clk,
- .get_rate = get_rate_fpm,
-};
-
-#define PCCR0 CCM_PCCR0
-#define PCCR1 CCM_PCCR1
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .enable = clk_pccr_enable, \
- .disable = clk_pccr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = get_rate_##getsetround, \
- .set_rate = set_rate_##getsetround, \
- .round_rate = round_rate_##getsetround, \
- .enable = clk_pccr_enable, \
- .disable = clk_pccr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-/* Forward declaration to keep the following list in order */
-static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
- dma_clk1, lcdc_clk2, vpu_clk1;
-
-/* All clocks we can gate through PCCRx in the order of PCCRx bits */
-DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk);
-DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk);
-DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk);
-DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
-DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
-DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
-DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk);
-DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk);
-DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
-DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(pata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
-DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk);
-
-/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- /* i.mx27 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk)
- _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
- _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
- _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
- _REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
- _REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
- _REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
- _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK(NULL, "vpu", vpu_clk)
- _REGISTER_CLOCK(NULL, "dma", dma_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "brom", brom_clk)
- _REGISTER_CLOCK(NULL, "emma", emma_clk)
- _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
- _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
-};
-
-/* Adjust the clock path for TO2 and later */
-static void __init to2_adjust_clocks(void)
-{
- unsigned long cscr = __raw_readl(CCM_CSCR);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- if (cscr & CCM_CSCR_ARM_SRC)
- cpu_clk.parent = &mpll_main1_clk;
-
- if (!(cscr & CCM_CSCR_SSI2))
- ssi1_clk.parent = &spll_clk;
-
- if (!(cscr & CCM_CSCR_SSI1))
- ssi1_clk.parent = &spll_clk;
-
- if (!(cscr & CCM_CSCR_VPU))
- vpu_clk.parent = &spll_clk;
- } else {
- cpu_clk.parent = &mpll_clk;
- cpu_clk.set_parent = NULL;
- cpu_clk.round_rate = NULL;
- cpu_clk.set_rate = NULL;
- ahb_clk.parent = &mpll_clk;
-
- per1_clk.parent = &mpll_clk;
- per2_clk.parent = &mpll_clk;
- per3_clk.parent = &mpll_clk;
- per4_clk.parent = &mpll_clk;
-
- ssi1_clk.parent = &mpll_clk;
- ssi2_clk.parent = &mpll_clk;
-
- vpu_clk.parent = &mpll_clk;
- }
-}
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx27_clocks_init(unsigned long fref)
-{
- u32 cscr = __raw_readl(CCM_CSCR);
-
- external_high_reference = fref;
-
- /* detect clock reference for both system PLLs */
- if (cscr & CCM_CSCR_MCU)
- mpll_clk.parent = &ckih_clk;
- else
- mpll_clk.parent = &fpm_clk;
-
- if (cscr & CCM_CSCR_SP)
- spll_clk.parent = &ckih_clk;
- else
- spll_clk.parent = &fpm_clk;
-
- to2_adjust_clocks();
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks we do not need */
- __raw_writel(0, CCM_PCCR0);
- __raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
-
- spll_clk.disable(&spll_clk);
-
- /* enable basic clocks */
- clk_enable(&per1_clk);
- clk_enable(&gpio_clk);
- clk_enable(&emi_clk);
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX27", mx27_revision());
- clk_disable(&iim_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart1_clk);
-#endif
-
- mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
-
- return 0;
-}
-
-#ifdef CONFIG_OF
-int __init mx27_clocks_init_dt(void)
-{
- struct device_node *np;
- u32 fref = 26000000; /* default */
-
- for_each_compatible_node(np, NULL, "fixed-clock") {
- if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
- continue;
-
- if (!of_property_read_u32(np, "clock-frequency", &fref))
- break;
- }
-
- return mx27_clocks_init(fref);
-}
-#endif
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
deleted file mode 100644
index 3a943cd..0000000
--- a/arch/arm/mach-imx/clock-imx31.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
- u32 min_pre, temp_pre, old_err, err;
-
- if (div >= 512) {
- *pre = 8;
- *post = 64;
- } else if (div >= 64) {
- min_pre = (div - 1) / 64 + 1;
- old_err = 8;
- for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = (div + *pre - 1) / *pre;
- } else if (div <= 8) {
- *pre = div;
- *post = 1;
- } else {
- *pre = 1;
- *post = div;
- }
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return 0;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 3 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
-
- /* special case for EMI clock */
- if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
- reg |= (1 << clk->enable_shift);
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
- unsigned long ccmr;
- unsigned int prcs;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
- prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
- if (prcs == 0x1)
- return CKIL_CLK_FREQ * 1024;
- else
- return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_UPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_SRPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
- unsigned long reg, ccmr;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
-
- if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
- return clk_get_rate(&ckih_clk);
-
- reg = __raw_readl(MXC_CCM_MPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
- u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
- if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
- return clk_get_rate(&serial_pll_clk);
- else
- return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
- unsigned long max_pdf;
-
- max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
- MXC_CCM_PDR0_MAX_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
- unsigned long ipg_pdf;
-
- ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
- MXC_CCM_PDR0_IPG_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
- unsigned long nfc_pdf;
-
- nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
- MXC_CCM_PDR0_NFC_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
- unsigned long hsp_pdf;
-
- hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
- MXC_CCM_PDR0_HSP_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
- unsigned long usb_pdf, usb_prepdf;
-
- usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
- MXC_CCM_PDR1_USB_PODF_OFFSET);
- usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
- MXC_CCM_PDR1_USB_PRDF_OFFSET);
- return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
- u32 reg, pre, post;
-
- reg = __raw_readl(MXC_CCM_PDR0);
- pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
- MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- pre++;
- post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
- MXC_CCM_PDR0_CSI_PODF_OFFSET;
- post++;
- return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post, parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set CSI clock divider */
- reg = __raw_readl(MXC_CCM_PDR0) &
- ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
- reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
- reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR0);
-
- return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
- unsigned long ssi1_pdf, ssi1_prepdf;
-
- ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PODF_OFFSET);
- ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
- unsigned long ssi2_pdf, ssi2_prepdf;
-
- ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PODF_OFFSET);
- ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
- unsigned long firi_pdf, firi_prepdf;
-
- firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PODF_OFFSET);
- firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post;
- u32 parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set FIRI clock divider */
- reg = __raw_readl(MXC_CCM_PDR1) &
- ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
- reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
- reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR1);
-
- return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
- MXC_CCM_PDR2_MST1_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
- MXC_CCM_PDR2_MST2_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
- return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
- .get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
- .parent = &mcu_pll_clk,
- .get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = serial_pll_get_rate,
- .enable = serial_pll_enable,
- .disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = usb_pll_get_rate,
- .enable = usb_pll_enable,
- .disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
- .parent = &mcu_main_clk,
- .get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = getsetround##_get_rate, \
- .set_rate = getsetround##_set_rate, \
- .round_rate = getsetround##_round_rate, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
-
-DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
-DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "epit", epit1_clk)
- _REGISTER_CLOCK(NULL, "epit", epit2_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
- _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- /* i.mx31 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
- _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK(NULL, "firi", firi_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "rng", rng_clk)
- _REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
- _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
- _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
- _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
- _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
- u32 reg;
-
- ckih_rate = fref;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* change the csi_clk parent if necessary */
- reg = __raw_readl(MXC_CCM_CCMR);
- if (!(reg & MXC_CCM_CCMR_CSCS))
- if (clk_set_parent(&csi_clk, &usb_pll_clk))
- pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
- /* Turn off all possible clocks */
- __raw_writel((3 << 4), MXC_CCM_CGR0);
- __raw_writel(0, MXC_CCM_CGR1);
- __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
- 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
- MX32, but still required to be set */
- MXC_CCM_CGR2);
-
- /*
- * Before turning off usb_pll make sure ipg_per_clk is generated
- * by ipg_clk and not usb_pll.
- */
- __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
- usb_pll_disable(&usb_pll_clk);
-
- pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
- clk_enable(&gpt_clk);
- clk_enable(&emi_clk);
- clk_enable(&iim_clk);
- mx31_revision();
- clk_disable(&iim_clk);
-
- clk_enable(&serial_pll_clk);
-
- if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
- reg = __raw_readl(MXC_CCM_PMCR1);
- /* No PLL restart on DVFS switch; enable auto EMI handshake */
- reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
- __raw_writel(reg, MXC_CCM_PMCR1);
- }
-
- mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
deleted file mode 100644
index e56c1a8..0000000
--- a/arch/arm/mach-imx/clock-imx35.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#ifdef HAVE_SET_RATE_SUPPORT
-static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
-{
- u32 min_pre, temp_pre, old_err, err;
-
- min_pre = (div - 1) / maxpost + 1;
- old_err = 8;
-
- for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
- if (div > (temp_pre * maxpost))
- break;
-
- if (div < (temp_pre * temp_pre))
- continue;
-
- err = div % temp_pre;
-
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
-
- err = temp_pre - err;
-
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
-
- *post = (div + *pre - 1) / *pre;
-}
-
-/* get the best values for a 3-bit divider combined with a 6-bit divider */
-static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
-{
- if (div >= 512) {
- *pre = 8;
- *post = 64;
- } else if (div >= 64) {
- calc_dividers(div, pre, post, 64);
- } else if (div <= 8) {
- *pre = div;
- *post = 1;
- } else {
- *pre = 1;
- *post = div;
- }
-}
-
-/* get the best values for two cascaded 3-bit dividers */
-static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
-{
- if (div >= 64) {
- *pre = *post = 8;
- } else if (div > 8) {
- calc_dividers(div, pre, post, 8);
- } else {
- *pre = 1;
- *post = div;
- }
-}
-#endif
-
-static unsigned long get_rate_mpll(void)
-{
- ulong mpctl = __raw_readl(MX35_CCM_MPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_ppll(void)
-{
- ulong ppctl = __raw_readl(MX35_CCM_PPCTL);
-
- return mxc_decode_pll(ppctl, 24000000);
-}
-
-struct arm_ahb_div {
- unsigned char arm, ahb, sel;
-};
-
-static struct arm_ahb_div clk_consumer[] = {
- { .arm = 1, .ahb = 4, .sel = 0},
- { .arm = 1, .ahb = 3, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 4, .ahb = 1, .sel = 0},
- { .arm = 1, .ahb = 5, .sel = 0},
- { .arm = 1, .ahb = 8, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 1},
- { .arm = 2, .ahb = 4, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 4, .ahb = 2, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
-static unsigned long get_rate_arm(void)
-{
- unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
- struct arm_ahb_div *aad;
- unsigned long fref = get_rate_mpll();
-
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- if (aad->sel)
- fref = fref * 3 / 4;
-
- return fref / aad->arm;
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
- struct arm_ahb_div *aad;
- unsigned long fref = get_rate_arm();
-
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-
- return fref / aad->ahb;
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
- unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
- unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
- unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
-
- if (pdr3 & (1 << 14))
- return get_rate_arm() / div;
- else
- return get_rate_ppll() / div;
-}
-
-static unsigned long get_rate_sdhc(struct clk *clk)
-{
- unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
- unsigned long div, rate;
-
- if (pdr3 & (1 << 6))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- switch (clk->id) {
- default:
- case 0:
- div = pdr3 & 0x3f;
- break;
- case 1:
- div = (pdr3 >> 8) & 0x3f;
- break;
- case 2:
- div = (pdr3 >> 16) & 0x3f;
- break;
- }
-
- return rate / (div + 1);
-}
-
-static unsigned long get_rate_mshc(struct clk *clk)
-{
- unsigned long pdr1 = __raw_readl(MXC_CCM_PDR1);
- unsigned long div1, div2, rate;
-
- if (pdr1 & (1 << 7))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- div1 = (pdr1 >> 29) & 0x7;
- div2 = (pdr1 >> 22) & 0x3f;
-
- return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_ssi(struct clk *clk)
-{
- unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
- unsigned long div1, div2, rate;
-
- if (pdr2 & (1 << 6))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- switch (clk->id) {
- default:
- case 0:
- div1 = pdr2 & 0x3f;
- div2 = (pdr2 >> 24) & 0x7;
- break;
- case 1:
- div1 = (pdr2 >> 8) & 0x3f;
- div2 = (pdr2 >> 27) & 0x7;
- break;
- }
-
- return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
- unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
- unsigned long rate;
-
- if (pdr2 & (1 << 7))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- return rate / (((pdr2 >> 16) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
- unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
- unsigned long rate;
-
- if (pdr4 & (1 << 9))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- return rate / (((pdr4 >> 22) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_ipg_per(struct clk *clk)
-{
- unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
- unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
- unsigned long div;
-
- if (pdr0 & (1 << 26)) {
- div = (pdr4 >> 16) & 0x3f;
- return get_rate_arm() / (div + 1);
- } else {
- div = (pdr0 >> 12) & 0x7;
- return get_rate_ahb(NULL) / (div + 1);
- }
-}
-
-static unsigned long get_rate_hsp(struct clk *clk)
-{
- unsigned long hsp_podf = (__raw_readl(MXC_CCM_PDR0) >> 20) & 0x03;
- unsigned long fref = get_rate_mpll();
-
- if (fref > 400 * 1000 * 1000) {
- switch (hsp_podf) {
- case 0:
- return fref >> 2;
- case 1:
- return fref >> 3;
- case 2:
- return fref / 3;
- }
- } else {
- switch (hsp_podf) {
- case 0:
- case 2:
- return fref / 3;
- case 1:
- return fref / 6;
- }
- }
-
- return 0;
-}
-
-static int clk_cgr_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 3 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_cgr_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = clk_cgr_enable, \
- .disable = clk_cgr_disable, \
- }
-
-DEFINE_CLOCK(asrc_clk, 0, MX35_CCM_CGR0, 0, NULL, NULL);
-DEFINE_CLOCK(pata_clk, 0, MX35_CCM_CGR0, 2, get_rate_ipg, NULL);
-/* DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR0, 4, NULL, NULL); */
-DEFINE_CLOCK(can1_clk, 0, MX35_CCM_CGR0, 6, get_rate_ipg, NULL);
-DEFINE_CLOCK(can2_clk, 1, MX35_CCM_CGR0, 8, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, MX35_CCM_CGR0, 10, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk, 1, MX35_CCM_CGR0, 12, get_rate_ipg, NULL);
-DEFINE_CLOCK(ect_clk, 0, MX35_CCM_CGR0, 14, get_rate_ipg, NULL);
-DEFINE_CLOCK(edio_clk, 0, MX35_CCM_CGR0, 16, NULL, NULL);
-DEFINE_CLOCK(emi_clk, 0, MX35_CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk, 0, MX35_CCM_CGR0, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit2_clk, 1, MX35_CCM_CGR0, 22, get_rate_ipg, NULL);
-DEFINE_CLOCK(esai_clk, 0, MX35_CCM_CGR0, 24, NULL, NULL);
-DEFINE_CLOCK(esdhc1_clk, 0, MX35_CCM_CGR0, 26, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc2_clk, 1, MX35_CCM_CGR0, 28, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc3_clk, 2, MX35_CCM_CGR0, 30, get_rate_sdhc, NULL);
-
-DEFINE_CLOCK(fec_clk, 0, MX35_CCM_CGR1, 0, get_rate_ipg, NULL);
-DEFINE_CLOCK(gpio1_clk, 0, MX35_CCM_CGR1, 2, NULL, NULL);
-DEFINE_CLOCK(gpio2_clk, 1, MX35_CCM_CGR1, 4, NULL, NULL);
-DEFINE_CLOCK(gpio3_clk, 2, MX35_CCM_CGR1, 6, NULL, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MX35_CCM_CGR1, 8, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c1_clk, 0, MX35_CCM_CGR1, 10, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MX35_CCM_CGR1, 12, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c3_clk, 2, MX35_CCM_CGR1, 14, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(iomuxc_clk, 0, MX35_CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk, 0, MX35_CCM_CGR1, 18, get_rate_hsp, NULL);
-DEFINE_CLOCK(kpp_clk, 0, MX35_CCM_CGR1, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(mlb_clk, 0, MX35_CCM_CGR1, 22, get_rate_ahb, NULL);
-DEFINE_CLOCK(mshc_clk, 0, MX35_CCM_CGR1, 24, get_rate_mshc, NULL);
-DEFINE_CLOCK(owire_clk, 0, MX35_CCM_CGR1, 26, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(pwm_clk, 0, MX35_CCM_CGR1, 28, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(rngc_clk, 0, MX35_CCM_CGR1, 30, get_rate_ipg, NULL);
-
-DEFINE_CLOCK(rtc_clk, 0, MX35_CCM_CGR2, 0, get_rate_ipg, NULL);
-DEFINE_CLOCK(rtic_clk, 0, MX35_CCM_CGR2, 2, get_rate_ahb, NULL);
-DEFINE_CLOCK(scc_clk, 0, MX35_CCM_CGR2, 4, get_rate_ipg, NULL);
-DEFINE_CLOCK(sdma_clk, 0, MX35_CCM_CGR2, 6, NULL, NULL);
-DEFINE_CLOCK(spba_clk, 0, MX35_CCM_CGR2, 8, get_rate_ipg, NULL);
-DEFINE_CLOCK(spdif_clk, 0, MX35_CCM_CGR2, 10, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MX35_CCM_CGR2, 12, get_rate_ssi, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MX35_CCM_CGR2, 14, get_rate_ssi, NULL);
-DEFINE_CLOCK(uart1_clk, 0, MX35_CCM_CGR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk, 1, MX35_CCM_CGR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk, 2, MX35_CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, MX35_CCM_CGR2, 22, get_rate_otg, NULL);
-DEFINE_CLOCK(wdog_clk, 0, MX35_CCM_CGR2, 24, NULL, NULL);
-DEFINE_CLOCK(max_clk, 0, MX35_CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR2, 30, NULL, NULL);
-
-DEFINE_CLOCK(csi_clk, 0, MX35_CCM_CGR3, 0, get_rate_csi, NULL);
-DEFINE_CLOCK(iim_clk, 0, MX35_CCM_CGR3, 2, NULL, NULL);
-DEFINE_CLOCK(gpu2d_clk, 0, MX35_CCM_CGR3, 4, NULL, NULL);
-
-DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL);
-
-static int clk_dummy_enable(struct clk *clk)
-{
- return 0;
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- unsigned long div1;
-
- div1 = (__raw_readl(MX35_CCM_PDR4) >> 28) + 1;
-
- return get_rate_ahb(NULL) / div1;
-}
-
-/* NAND Controller: It seems it can't be disabled */
-static struct clk nfc_clk = {
- .id = 0,
- .enable_reg = 0,
- .enable_shift = 0,
- .get_rate = get_rate_nfc,
- .set_rate = NULL, /* set_rate_nfc, */
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "asrc", asrc_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
- _REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK(NULL, "ect", ect_clk)
- _REGISTER_CLOCK(NULL, "edio", edio_clk)
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
- _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
- _REGISTER_CLOCK(NULL, "esai", esai_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk)
- /* i.mx35 has the i.mx27 type fec */
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
- _REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
- _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
- _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
- _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK(NULL, "mlb", mlb_clk)
- _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
- _REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK(NULL, "rngc", rngc_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "spba", spba_clk)
- _REGISTER_CLOCK(NULL, "spdif", spdif_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- /* i.mx35 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "max", max_clk)
- _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
- _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-};
-
-int __init mx35_clocks_init()
-{
- unsigned int cgr2 = 3 << 26;
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- cgr2 |= 3 << 16;
-#endif
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks except the ones we need to survive, namely:
- * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
- */
- __raw_writel((3 << 18), MX35_CCM_CGR0);
- __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
- MX35_CCM_CGR1);
- __raw_writel(cgr2, MX35_CCM_CGR2);
- __raw_writel(0, MX35_CCM_CGR3);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX35", mx35_revision());
- clk_disable(&iim_clk);
-
- /*
- * Check if we came up in internal boot mode. If yes, we need some
- * extra clocks turned on, otherwise the MX35 boot ROM code will
- * hang after a watchdog reset.
- */
- if (!(__raw_readl(MX35_CCM_RCSR) & (3 << 10))) {
- /* Additionally turn on UART1, SCC, and IIM clocks */
- clk_enable(&iim_clk);
- clk_enable(&uart1_clk);
- clk_enable(&scc_clk);
- }
-
-#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
-#else
- mxc_timer_init(&gpt_clk,
- MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
-#endif
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
deleted file mode 100644
index 111c328..0000000
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ /dev/null
@@ -1,2111 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/div64.h>
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define PLL_BASE IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
-#define PLL1_SYS (PLL_BASE + 0x000)
-#define PLL2_BUS (PLL_BASE + 0x030)
-#define PLL3_USB_OTG (PLL_BASE + 0x010)
-#define PLL4_AUDIO (PLL_BASE + 0x070)
-#define PLL5_VIDEO (PLL_BASE + 0x0a0)
-#define PLL6_MLB (PLL_BASE + 0x0d0)
-#define PLL7_USB_HOST (PLL_BASE + 0x020)
-#define PLL8_ENET (PLL_BASE + 0x0e0)
-#define PFD_480 (PLL_BASE + 0x0f0)
-#define PFD_528 (PLL_BASE + 0x100)
-#define PLL_NUM_OFFSET 0x010
-#define PLL_DENOM_OFFSET 0x020
-
-#define PFD0 7
-#define PFD1 15
-#define PFD2 23
-#define PFD3 31
-#define PFD_FRAC_MASK 0x3f
-
-#define BM_PLL_BYPASS (0x1 << 16)
-#define BM_PLL_ENABLE (0x1 << 13)
-#define BM_PLL_POWER_DOWN (0x1 << 12)
-#define BM_PLL_LOCK (0x1 << 31)
-#define BP_PLL_SYS_DIV_SELECT 0
-#define BM_PLL_SYS_DIV_SELECT (0x7f << 0)
-#define BP_PLL_BUS_DIV_SELECT 0
-#define BM_PLL_BUS_DIV_SELECT (0x1 << 0)
-#define BP_PLL_USB_DIV_SELECT 0
-#define BM_PLL_USB_DIV_SELECT (0x3 << 0)
-#define BP_PLL_AV_DIV_SELECT 0
-#define BM_PLL_AV_DIV_SELECT (0x7f << 0)
-#define BP_PLL_ENET_DIV_SELECT 0
-#define BM_PLL_ENET_DIV_SELECT (0x3 << 0)
-#define BM_PLL_ENET_EN_PCIE (0x1 << 19)
-#define BM_PLL_ENET_EN_SATA (0x1 << 20)
-
-#define CCM_BASE IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
-#define CCR (CCM_BASE + 0x00)
-#define CCDR (CCM_BASE + 0x04)
-#define CSR (CCM_BASE + 0x08)
-#define CCSR (CCM_BASE + 0x0c)
-#define CACRR (CCM_BASE + 0x10)
-#define CBCDR (CCM_BASE + 0x14)
-#define CBCMR (CCM_BASE + 0x18)
-#define CSCMR1 (CCM_BASE + 0x1c)
-#define CSCMR2 (CCM_BASE + 0x20)
-#define CSCDR1 (CCM_BASE + 0x24)
-#define CS1CDR (CCM_BASE + 0x28)
-#define CS2CDR (CCM_BASE + 0x2c)
-#define CDCDR (CCM_BASE + 0x30)
-#define CHSCCDR (CCM_BASE + 0x34)
-#define CSCDR2 (CCM_BASE + 0x38)
-#define CSCDR3 (CCM_BASE + 0x3c)
-#define CSCDR4 (CCM_BASE + 0x40)
-#define CWDR (CCM_BASE + 0x44)
-#define CDHIPR (CCM_BASE + 0x48)
-#define CDCR (CCM_BASE + 0x4c)
-#define CTOR (CCM_BASE + 0x50)
-#define CLPCR (CCM_BASE + 0x54)
-#define CISR (CCM_BASE + 0x58)
-#define CIMR (CCM_BASE + 0x5c)
-#define CCOSR (CCM_BASE + 0x60)
-#define CGPR (CCM_BASE + 0x64)
-#define CCGR0 (CCM_BASE + 0x68)
-#define CCGR1 (CCM_BASE + 0x6c)
-#define CCGR2 (CCM_BASE + 0x70)
-#define CCGR3 (CCM_BASE + 0x74)
-#define CCGR4 (CCM_BASE + 0x78)
-#define CCGR5 (CCM_BASE + 0x7c)
-#define CCGR6 (CCM_BASE + 0x80)
-#define CCGR7 (CCM_BASE + 0x84)
-#define CMEOR (CCM_BASE + 0x88)
-
-#define CG0 0
-#define CG1 2
-#define CG2 4
-#define CG3 6
-#define CG4 8
-#define CG5 10
-#define CG6 12
-#define CG7 14
-#define CG8 16
-#define CG9 18
-#define CG10 20
-#define CG11 22
-#define CG12 24
-#define CG13 26
-#define CG14 28
-#define CG15 30
-
-#define BM_CCSR_PLL1_SW_SEL (0x1 << 2)
-#define BM_CCSR_STEP_SEL (0x1 << 8)
-
-#define BP_CACRR_ARM_PODF 0
-#define BM_CACRR_ARM_PODF (0x7 << 0)
-
-#define BP_CBCDR_PERIPH2_CLK2_PODF 0
-#define BM_CBCDR_PERIPH2_CLK2_PODF (0x7 << 0)
-#define BP_CBCDR_MMDC_CH1_AXI_PODF 3
-#define BM_CBCDR_MMDC_CH1_AXI_PODF (0x7 << 3)
-#define BP_CBCDR_AXI_SEL 6
-#define BM_CBCDR_AXI_SEL (0x3 << 6)
-#define BP_CBCDR_IPG_PODF 8
-#define BM_CBCDR_IPG_PODF (0x3 << 8)
-#define BP_CBCDR_AHB_PODF 10
-#define BM_CBCDR_AHB_PODF (0x7 << 10)
-#define BP_CBCDR_AXI_PODF 16
-#define BM_CBCDR_AXI_PODF (0x7 << 16)
-#define BP_CBCDR_MMDC_CH0_AXI_PODF 19
-#define BM_CBCDR_MMDC_CH0_AXI_PODF (0x7 << 19)
-#define BP_CBCDR_PERIPH_CLK_SEL 25
-#define BM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
-#define BP_CBCDR_PERIPH2_CLK_SEL 26
-#define BM_CBCDR_PERIPH2_CLK_SEL (0x1 << 26)
-#define BP_CBCDR_PERIPH_CLK2_PODF 27
-#define BM_CBCDR_PERIPH_CLK2_PODF (0x7 << 27)
-
-#define BP_CBCMR_GPU2D_AXI_SEL 0
-#define BM_CBCMR_GPU2D_AXI_SEL (0x1 << 0)
-#define BP_CBCMR_GPU3D_AXI_SEL 1
-#define BM_CBCMR_GPU3D_AXI_SEL (0x1 << 1)
-#define BP_CBCMR_GPU3D_CORE_SEL 4
-#define BM_CBCMR_GPU3D_CORE_SEL (0x3 << 4)
-#define BP_CBCMR_GPU3D_SHADER_SEL 8
-#define BM_CBCMR_GPU3D_SHADER_SEL (0x3 << 8)
-#define BP_CBCMR_PCIE_AXI_SEL 10
-#define BM_CBCMR_PCIE_AXI_SEL (0x1 << 10)
-#define BP_CBCMR_VDO_AXI_SEL 11
-#define BM_CBCMR_VDO_AXI_SEL (0x1 << 11)
-#define BP_CBCMR_PERIPH_CLK2_SEL 12
-#define BM_CBCMR_PERIPH_CLK2_SEL (0x3 << 12)
-#define BP_CBCMR_VPU_AXI_SEL 14
-#define BM_CBCMR_VPU_AXI_SEL (0x3 << 14)
-#define BP_CBCMR_GPU2D_CORE_SEL 16
-#define BM_CBCMR_GPU2D_CORE_SEL (0x3 << 16)
-#define BP_CBCMR_PRE_PERIPH_CLK_SEL 18
-#define BM_CBCMR_PRE_PERIPH_CLK_SEL (0x3 << 18)
-#define BP_CBCMR_PERIPH2_CLK2_SEL 20
-#define BM_CBCMR_PERIPH2_CLK2_SEL (0x1 << 20)
-#define BP_CBCMR_PRE_PERIPH2_CLK_SEL 21
-#define BM_CBCMR_PRE_PERIPH2_CLK_SEL (0x3 << 21)
-#define BP_CBCMR_GPU2D_CORE_PODF 23
-#define BM_CBCMR_GPU2D_CORE_PODF (0x7 << 23)
-#define BP_CBCMR_GPU3D_CORE_PODF 26
-#define BM_CBCMR_GPU3D_CORE_PODF (0x7 << 26)
-#define BP_CBCMR_GPU3D_SHADER_PODF 29
-#define BM_CBCMR_GPU3D_SHADER_PODF (0x7 << 29)
-
-#define BP_CSCMR1_PERCLK_PODF 0
-#define BM_CSCMR1_PERCLK_PODF (0x3f << 0)
-#define BP_CSCMR1_SSI1_SEL 10
-#define BM_CSCMR1_SSI1_SEL (0x3 << 10)
-#define BP_CSCMR1_SSI2_SEL 12
-#define BM_CSCMR1_SSI2_SEL (0x3 << 12)
-#define BP_CSCMR1_SSI3_SEL 14
-#define BM_CSCMR1_SSI3_SEL (0x3 << 14)
-#define BP_CSCMR1_USDHC1_SEL 16
-#define BM_CSCMR1_USDHC1_SEL (0x1 << 16)
-#define BP_CSCMR1_USDHC2_SEL 17
-#define BM_CSCMR1_USDHC2_SEL (0x1 << 17)
-#define BP_CSCMR1_USDHC3_SEL 18
-#define BM_CSCMR1_USDHC3_SEL (0x1 << 18)
-#define BP_CSCMR1_USDHC4_SEL 19
-#define BM_CSCMR1_USDHC4_SEL (0x1 << 19)
-#define BP_CSCMR1_EMI_PODF 20
-#define BM_CSCMR1_EMI_PODF (0x7 << 20)
-#define BP_CSCMR1_EMI_SLOW_PODF 23
-#define BM_CSCMR1_EMI_SLOW_PODF (0x7 << 23)
-#define BP_CSCMR1_EMI_SEL 27
-#define BM_CSCMR1_EMI_SEL (0x3 << 27)
-#define BP_CSCMR1_EMI_SLOW_SEL 29
-#define BM_CSCMR1_EMI_SLOW_SEL (0x3 << 29)
-
-#define BP_CSCMR2_CAN_PODF 2
-#define BM_CSCMR2_CAN_PODF (0x3f << 2)
-#define BM_CSCMR2_LDB_DI0_IPU_DIV (0x1 << 10)
-#define BM_CSCMR2_LDB_DI1_IPU_DIV (0x1 << 11)
-#define BP_CSCMR2_ESAI_SEL 19
-#define BM_CSCMR2_ESAI_SEL (0x3 << 19)
-
-#define BP_CSCDR1_UART_PODF 0
-#define BM_CSCDR1_UART_PODF (0x3f << 0)
-#define BP_CSCDR1_USDHC1_PODF 11
-#define BM_CSCDR1_USDHC1_PODF (0x7 << 11)
-#define BP_CSCDR1_USDHC2_PODF 16
-#define BM_CSCDR1_USDHC2_PODF (0x7 << 16)
-#define BP_CSCDR1_USDHC3_PODF 19
-#define BM_CSCDR1_USDHC3_PODF (0x7 << 19)
-#define BP_CSCDR1_USDHC4_PODF 22
-#define BM_CSCDR1_USDHC4_PODF (0x7 << 22)
-#define BP_CSCDR1_VPU_AXI_PODF 25
-#define BM_CSCDR1_VPU_AXI_PODF (0x7 << 25)
-
-#define BP_CS1CDR_SSI1_PODF 0
-#define BM_CS1CDR_SSI1_PODF (0x3f << 0)
-#define BP_CS1CDR_SSI1_PRED 6
-#define BM_CS1CDR_SSI1_PRED (0x7 << 6)
-#define BP_CS1CDR_ESAI_PRED 9
-#define BM_CS1CDR_ESAI_PRED (0x7 << 9)
-#define BP_CS1CDR_SSI3_PODF 16
-#define BM_CS1CDR_SSI3_PODF (0x3f << 16)
-#define BP_CS1CDR_SSI3_PRED 22
-#define BM_CS1CDR_SSI3_PRED (0x7 << 22)
-#define BP_CS1CDR_ESAI_PODF 25
-#define BM_CS1CDR_ESAI_PODF (0x7 << 25)
-
-#define BP_CS2CDR_SSI2_PODF 0
-#define BM_CS2CDR_SSI2_PODF (0x3f << 0)
-#define BP_CS2CDR_SSI2_PRED 6
-#define BM_CS2CDR_SSI2_PRED (0x7 << 6)
-#define BP_CS2CDR_LDB_DI0_SEL 9
-#define BM_CS2CDR_LDB_DI0_SEL (0x7 << 9)
-#define BP_CS2CDR_LDB_DI1_SEL 12
-#define BM_CS2CDR_LDB_DI1_SEL (0x7 << 12)
-#define BP_CS2CDR_ENFC_SEL 16
-#define BM_CS2CDR_ENFC_SEL (0x3 << 16)
-#define BP_CS2CDR_ENFC_PRED 18
-#define BM_CS2CDR_ENFC_PRED (0x7 << 18)
-#define BP_CS2CDR_ENFC_PODF 21
-#define BM_CS2CDR_ENFC_PODF (0x3f << 21)
-
-#define BP_CDCDR_ASRC_SERIAL_SEL 7
-#define BM_CDCDR_ASRC_SERIAL_SEL (0x3 << 7)
-#define BP_CDCDR_ASRC_SERIAL_PODF 9
-#define BM_CDCDR_ASRC_SERIAL_PODF (0x7 << 9)
-#define BP_CDCDR_ASRC_SERIAL_PRED 12
-#define BM_CDCDR_ASRC_SERIAL_PRED (0x7 << 12)
-#define BP_CDCDR_SPDIF_SEL 20
-#define BM_CDCDR_SPDIF_SEL (0x3 << 20)
-#define BP_CDCDR_SPDIF_PODF 22
-#define BM_CDCDR_SPDIF_PODF (0x7 << 22)
-#define BP_CDCDR_SPDIF_PRED 25
-#define BM_CDCDR_SPDIF_PRED (0x7 << 25)
-#define BP_CDCDR_HSI_TX_PODF 29
-#define BM_CDCDR_HSI_TX_PODF (0x7 << 29)
-#define BP_CDCDR_HSI_TX_SEL 28
-#define BM_CDCDR_HSI_TX_SEL (0x1 << 28)
-
-#define BP_CHSCCDR_IPU1_DI0_SEL 0
-#define BM_CHSCCDR_IPU1_DI0_SEL (0x7 << 0)
-#define BP_CHSCCDR_IPU1_DI0_PRE_PODF 3
-#define BM_CHSCCDR_IPU1_DI0_PRE_PODF (0x7 << 3)
-#define BP_CHSCCDR_IPU1_DI0_PRE_SEL 6
-#define BM_CHSCCDR_IPU1_DI0_PRE_SEL (0x7 << 6)
-#define BP_CHSCCDR_IPU1_DI1_SEL 9
-#define BM_CHSCCDR_IPU1_DI1_SEL (0x7 << 9)
-#define BP_CHSCCDR_IPU1_DI1_PRE_PODF 12
-#define BM_CHSCCDR_IPU1_DI1_PRE_PODF (0x7 << 12)
-#define BP_CHSCCDR_IPU1_DI1_PRE_SEL 15
-#define BM_CHSCCDR_IPU1_DI1_PRE_SEL (0x7 << 15)
-
-#define BP_CSCDR2_IPU2_DI0_SEL 0
-#define BM_CSCDR2_IPU2_DI0_SEL (0x7)
-#define BP_CSCDR2_IPU2_DI0_PRE_PODF 3
-#define BM_CSCDR2_IPU2_DI0_PRE_PODF (0x7 << 3)
-#define BP_CSCDR2_IPU2_DI0_PRE_SEL 6
-#define BM_CSCDR2_IPU2_DI0_PRE_SEL (0x7 << 6)
-#define BP_CSCDR2_IPU2_DI1_SEL 9
-#define BM_CSCDR2_IPU2_DI1_SEL (0x7 << 9)
-#define BP_CSCDR2_IPU2_DI1_PRE_PODF 12
-#define BM_CSCDR2_IPU2_DI1_PRE_PODF (0x7 << 12)
-#define BP_CSCDR2_IPU2_DI1_PRE_SEL 15
-#define BM_CSCDR2_IPU2_DI1_PRE_SEL (0x7 << 15)
-#define BP_CSCDR2_ECSPI_CLK_PODF 19
-#define BM_CSCDR2_ECSPI_CLK_PODF (0x3f << 19)
-
-#define BP_CSCDR3_IPU1_HSP_SEL 9
-#define BM_CSCDR3_IPU1_HSP_SEL (0x3 << 9)
-#define BP_CSCDR3_IPU1_HSP_PODF 11
-#define BM_CSCDR3_IPU1_HSP_PODF (0x7 << 11)
-#define BP_CSCDR3_IPU2_HSP_SEL 14
-#define BM_CSCDR3_IPU2_HSP_SEL (0x3 << 14)
-#define BP_CSCDR3_IPU2_HSP_PODF 16
-#define BM_CSCDR3_IPU2_HSP_PODF (0x7 << 16)
-
-#define BM_CDHIPR_AXI_PODF_BUSY (0x1 << 0)
-#define BM_CDHIPR_AHB_PODF_BUSY (0x1 << 1)
-#define BM_CDHIPR_MMDC_CH1_PODF_BUSY (0x1 << 2)
-#define BM_CDHIPR_PERIPH2_SEL_BUSY (0x1 << 3)
-#define BM_CDHIPR_MMDC_CH0_PODF_BUSY (0x1 << 4)
-#define BM_CDHIPR_PERIPH_SEL_BUSY (0x1 << 5)
-#define BM_CDHIPR_ARM_PODF_BUSY (0x1 << 16)
-
-#define BP_CLPCR_LPM 0
-#define BM_CLPCR_LPM (0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define BM_CLPCR_SBYOS (0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define BM_CLPCR_VSTBY (0x1 << 8)
-#define BP_CLPCR_STBY_COUNT 9
-#define BM_CLPCR_STBY_COUNT (0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
-
-#define BP_CCOSR_CKO1_EN 7
-#define BP_CCOSR_CKO1_PODF 4
-#define BM_CCOSR_CKO1_PODF (0x7 << 4)
-#define BP_CCOSR_CKO1_SEL 0
-#define BM_CCOSR_CKO1_SEL (0xf << 0)
-
-#define FREQ_480M 480000000
-#define FREQ_528M 528000000
-#define FREQ_594M 594000000
-#define FREQ_650M 650000000
-#define FREQ_1300M 1300000000
-
-static struct clk pll1_sys;
-static struct clk pll2_bus;
-static struct clk pll3_usb_otg;
-static struct clk pll4_audio;
-static struct clk pll5_video;
-static struct clk pll6_mlb;
-static struct clk pll7_usb_host;
-static struct clk pll8_enet;
-static struct clk apbh_dma_clk;
-static struct clk arm_clk;
-static struct clk ipg_clk;
-static struct clk ahb_clk;
-static struct clk axi_clk;
-static struct clk mmdc_ch0_axi_clk;
-static struct clk mmdc_ch1_axi_clk;
-static struct clk periph_clk;
-static struct clk periph_pre_clk;
-static struct clk periph_clk2_clk;
-static struct clk periph2_clk;
-static struct clk periph2_pre_clk;
-static struct clk periph2_clk2_clk;
-static struct clk gpu2d_core_clk;
-static struct clk gpu3d_core_clk;
-static struct clk gpu3d_shader_clk;
-static struct clk ipg_perclk;
-static struct clk emi_clk;
-static struct clk emi_slow_clk;
-static struct clk can1_clk;
-static struct clk uart_clk;
-static struct clk usdhc1_clk;
-static struct clk usdhc2_clk;
-static struct clk usdhc3_clk;
-static struct clk usdhc4_clk;
-static struct clk vpu_clk;
-static struct clk hsi_tx_clk;
-static struct clk ipu1_di0_pre_clk;
-static struct clk ipu1_di1_pre_clk;
-static struct clk ipu2_di0_pre_clk;
-static struct clk ipu2_di1_pre_clk;
-static struct clk ipu1_clk;
-static struct clk ipu2_clk;
-static struct clk ssi1_clk;
-static struct clk ssi3_clk;
-static struct clk esai_clk;
-static struct clk ssi2_clk;
-static struct clk spdif_clk;
-static struct clk asrc_serial_clk;
-static struct clk gpu2d_axi_clk;
-static struct clk gpu3d_axi_clk;
-static struct clk pcie_clk;
-static struct clk vdo_axi_clk;
-static struct clk ldb_di0_clk;
-static struct clk ldb_di1_clk;
-static struct clk ipu1_di0_clk;
-static struct clk ipu1_di1_clk;
-static struct clk ipu2_di0_clk;
-static struct clk ipu2_di1_clk;
-static struct clk enfc_clk;
-static struct clk cko1_clk;
-static struct clk dummy_clk = {};
-
-static unsigned long external_high_reference;
-static unsigned long external_low_reference;
-static unsigned long oscillator_reference;
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
- return oscillator_reference;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
- .get_rate = get_oscillator_reference_clock_rate,
-};
-
-static inline void __iomem *pll_get_reg_addr(struct clk *pll)
-{
- if (pll == &pll1_sys)
- return PLL1_SYS;
- else if (pll == &pll2_bus)
- return PLL2_BUS;
- else if (pll == &pll3_usb_otg)
- return PLL3_USB_OTG;
- else if (pll == &pll4_audio)
- return PLL4_AUDIO;
- else if (pll == &pll5_video)
- return PLL5_VIDEO;
- else if (pll == &pll6_mlb)
- return PLL6_MLB;
- else if (pll == &pll7_usb_host)
- return PLL7_USB_HOST;
- else if (pll == &pll8_enet)
- return PLL8_ENET;
- else
- BUG();
-
- return NULL;
-}
-
-static int pll_enable(struct clk *clk)
-{
- int timeout = 0x100000;
- void __iomem *reg;
- u32 val;
-
- reg = pll_get_reg_addr(clk);
- val = readl_relaxed(reg);
- val &= ~BM_PLL_BYPASS;
- val &= ~BM_PLL_POWER_DOWN;
- /* 480MHz PLLs have the opposite definition for power bit */
- if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
- val |= BM_PLL_POWER_DOWN;
- writel_relaxed(val, reg);
-
- /* Wait for PLL to lock */
- while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- return -EBUSY;
-
- /* Enable the PLL output now */
- val = readl_relaxed(reg);
- val |= BM_PLL_ENABLE;
- writel_relaxed(val, reg);
-
- return 0;
-}
-
-static void pll_disable(struct clk *clk)
-{
- void __iomem *reg;
- u32 val;
-
- reg = pll_get_reg_addr(clk);
- val = readl_relaxed(reg);
- val &= ~BM_PLL_ENABLE;
- val |= BM_PLL_BYPASS;
- val |= BM_PLL_POWER_DOWN;
- if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
- val &= ~BM_PLL_POWER_DOWN;
- writel_relaxed(val, reg);
-}
-
-static unsigned long pll1_sys_get_rate(struct clk *clk)
-{
- u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
- BP_PLL_SYS_DIV_SELECT;
-
- return clk_get_rate(clk->parent) * div / 2;
-}
-
-static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 val, div;
-
- if (rate < FREQ_650M || rate > FREQ_1300M)
- return -EINVAL;
-
- div = rate * 2 / clk_get_rate(clk->parent);
- val = readl_relaxed(PLL1_SYS);
- val &= ~BM_PLL_SYS_DIV_SELECT;
- val |= div << BP_PLL_SYS_DIV_SELECT;
- writel_relaxed(val, PLL1_SYS);
-
- return 0;
-}
-
-static unsigned long pll8_enet_get_rate(struct clk *clk)
-{
- u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
- BP_PLL_ENET_DIV_SELECT;
-
- switch (div) {
- case 0:
- return 25000000;
- case 1:
- return 50000000;
- case 2:
- return 100000000;
- case 3:
- return 125000000;
- }
-
- return 0;
-}
-
-static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 val, div;
-
- switch (rate) {
- case 25000000:
- div = 0;
- break;
- case 50000000:
- div = 1;
- break;
- case 100000000:
- div = 2;
- break;
- case 125000000:
- div = 3;
- break;
- default:
- return -EINVAL;
- }
-
- val = readl_relaxed(PLL8_ENET);
- val &= ~BM_PLL_ENET_DIV_SELECT;
- val |= div << BP_PLL_ENET_DIV_SELECT;
- writel_relaxed(val, PLL8_ENET);
-
- return 0;
-}
-
-static unsigned long pll_av_get_rate(struct clk *clk)
-{
- void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
- unsigned long parent_rate = clk_get_rate(clk->parent);
- u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
- u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
- u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
- BP_PLL_AV_DIV_SELECT;
-
- return (parent_rate * div) + ((parent_rate / mfd) * mfn);
-}
-
-static int pll_av_set_rate(struct clk *clk, unsigned long rate)
-{
- void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
- unsigned int parent_rate = clk_get_rate(clk->parent);
- u32 val, div;
- u32 mfn, mfd = 1000000;
- s64 temp64;
-
- if (rate < FREQ_650M || rate > FREQ_1300M)
- return -EINVAL;
-
- div = rate / parent_rate;
- temp64 = (u64) (rate - div * parent_rate);
- temp64 *= mfd;
- do_div(temp64, parent_rate);
- mfn = temp64;
-
- val = readl_relaxed(reg);
- val &= ~BM_PLL_AV_DIV_SELECT;
- val |= div << BP_PLL_AV_DIV_SELECT;
- writel_relaxed(val, reg);
- writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
- writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
-
- return 0;
-}
-
-static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
-{
- void __iomem *reg;
-
- if (clk == &pll2_bus) {
- reg = PLL2_BUS;
- *bp = BP_PLL_BUS_DIV_SELECT;
- *bm = BM_PLL_BUS_DIV_SELECT;
- } else if (clk == &pll3_usb_otg) {
- reg = PLL3_USB_OTG;
- *bp = BP_PLL_USB_DIV_SELECT;
- *bm = BM_PLL_USB_DIV_SELECT;
- } else if (clk == &pll7_usb_host) {
- reg = PLL7_USB_HOST;
- *bp = BP_PLL_USB_DIV_SELECT;
- *bm = BM_PLL_USB_DIV_SELECT;
- } else {
- BUG();
- }
-
- return reg;
-}
-
-static unsigned long pll_get_rate(struct clk *clk)
-{
- void __iomem *reg;
- u32 div, bp, bm;
-
- reg = pll_get_div_reg_bit(clk, &bp, &bm);
- div = (readl_relaxed(reg) & bm) >> bp;
-
- return (div == 1) ? clk_get_rate(clk->parent) * 22 :
- clk_get_rate(clk->parent) * 20;
-}
-
-static int pll_set_rate(struct clk *clk, unsigned long rate)
-{
- void __iomem *reg;
- u32 val, div, bp, bm;
-
- if (rate == FREQ_528M)
- div = 1;
- else if (rate == FREQ_480M)
- div = 0;
- else
- return -EINVAL;
-
- reg = pll_get_div_reg_bit(clk, &bp, &bm);
- val = readl_relaxed(reg);
- val &= ~bm;
- val |= div << bp;
- writel_relaxed(val, reg);
-
- return 0;
-}
-
-#define pll2_bus_get_rate pll_get_rate
-#define pll2_bus_set_rate pll_set_rate
-#define pll3_usb_otg_get_rate pll_get_rate
-#define pll3_usb_otg_set_rate pll_set_rate
-#define pll7_usb_host_get_rate pll_get_rate
-#define pll7_usb_host_set_rate pll_set_rate
-#define pll4_audio_get_rate pll_av_get_rate
-#define pll4_audio_set_rate pll_av_set_rate
-#define pll5_video_get_rate pll_av_get_rate
-#define pll5_video_set_rate pll_av_set_rate
-#define pll6_mlb_get_rate NULL
-#define pll6_mlb_set_rate NULL
-
-#define DEF_PLL(name) \
- static struct clk name = { \
- .enable = pll_enable, \
- .disable = pll_disable, \
- .get_rate = name##_get_rate, \
- .set_rate = name##_set_rate, \
- .parent = &osc_clk, \
- }
-
-DEF_PLL(pll1_sys);
-DEF_PLL(pll2_bus);
-DEF_PLL(pll3_usb_otg);
-DEF_PLL(pll4_audio);
-DEF_PLL(pll5_video);
-DEF_PLL(pll6_mlb);
-DEF_PLL(pll7_usb_host);
-DEF_PLL(pll8_enet);
-
-static unsigned long pfd_get_rate(struct clk *clk)
-{
- u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
- u32 frac, bp_frac;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- bp_frac = clk->enable_shift - 7;
- frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
- do_div(tmp, frac);
-
- return tmp;
-}
-
-static int pfd_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 val, frac, bp_frac;
- u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- /*
- * Round up the divider so that we don't set a rate
- * higher than what is requested
- */
- tmp += rate / 2;
- do_div(tmp, rate);
- frac = tmp;
- frac = (frac < 12) ? 12 : frac;
- frac = (frac > 35) ? 35 : frac;
-
- /*
- * The frac field always starts from 7 bits lower
- * position of enable bit
- */
- bp_frac = clk->enable_shift - 7;
- val = readl_relaxed(clk->enable_reg);
- val &= ~(PFD_FRAC_MASK << bp_frac);
- val |= frac << bp_frac;
- writel_relaxed(val, clk->enable_reg);
-
- tmp = (u64) clk_get_rate(clk->parent) * 18;
- do_div(tmp, frac);
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.disable(&apbh_dma_clk);
-
- return 0;
-}
-
-static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 frac;
- u64 tmp;
-
- tmp = (u64) clk_get_rate(clk->parent) * 18;
- tmp += rate / 2;
- do_div(tmp, rate);
- frac = tmp;
- frac = (frac < 12) ? 12 : frac;
- frac = (frac > 35) ? 35 : frac;
- tmp = (u64) clk_get_rate(clk->parent) * 18;
- do_div(tmp, frac);
-
- return tmp;
-}
-
-static int pfd_enable(struct clk *clk)
-{
- u32 val;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- val = readl_relaxed(clk->enable_reg);
- val &= ~(1 << clk->enable_shift);
- writel_relaxed(val, clk->enable_reg);
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.disable(&apbh_dma_clk);
-
- return 0;
-}
-
-static void pfd_disable(struct clk *clk)
-{
- u32 val;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- val = readl_relaxed(clk->enable_reg);
- val |= 1 << clk->enable_shift;
- writel_relaxed(val, clk->enable_reg);
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.disable(&apbh_dma_clk);
-}
-
-#define DEF_PFD(name, er, es, p) \
- static struct clk name = { \
- .enable_reg = er, \
- .enable_shift = es, \
- .enable = pfd_enable, \
- .disable = pfd_disable, \
- .get_rate = pfd_get_rate, \
- .set_rate = pfd_set_rate, \
- .round_rate = pfd_round_rate, \
- .parent = p, \
- }
-
-DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
-DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
-DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
-DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
-
-static unsigned long twd_clk_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk twd_clk = {
- .parent = &arm_clk,
- .get_rate = twd_clk_get_rate,
-};
-
-static unsigned long pll2_200m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk pll2_200m = {
- .parent = &pll2_pfd_400m,
- .get_rate = pll2_200m_get_rate,
-};
-
-static unsigned long pll3_120m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 4;
-}
-
-static struct clk pll3_120m = {
- .parent = &pll3_usb_otg,
- .get_rate = pll3_120m_get_rate,
-};
-
-static unsigned long pll3_80m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 6;
-}
-
-static struct clk pll3_80m = {
- .parent = &pll3_usb_otg,
- .get_rate = pll3_80m_get_rate,
-};
-
-static unsigned long pll3_60m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 8;
-}
-
-static struct clk pll3_60m = {
- .parent = &pll3_usb_otg,
- .get_rate = pll3_60m_get_rate,
-};
-
-static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val = readl_relaxed(CCSR);
-
- if (parent == &pll1_sys) {
- val &= ~BM_CCSR_PLL1_SW_SEL;
- val &= ~BM_CCSR_STEP_SEL;
- } else if (parent == &osc_clk) {
- val |= BM_CCSR_PLL1_SW_SEL;
- val &= ~BM_CCSR_STEP_SEL;
- } else if (parent == &pll2_pfd_400m) {
- val |= BM_CCSR_PLL1_SW_SEL;
- val |= BM_CCSR_STEP_SEL;
- } else {
- return -EINVAL;
- }
-
- writel_relaxed(val, CCSR);
-
- return 0;
-}
-
-static struct clk pll1_sw_clk = {
- .parent = &pll1_sys,
- .set_parent = pll1_sw_clk_set_parent,
-};
-
-static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
-{
- u32 min_pred, temp_pred, old_err, err;
-
- if (div >= 512) {
- *pred = 8;
- *podf = 64;
- } else if (div >= 8) {
- min_pred = (div - 1) / 64 + 1;
- old_err = 8;
- for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
- err = div % temp_pred;
- if (err == 0) {
- *pred = temp_pred;
- break;
- }
- err = temp_pred - err;
- if (err < old_err) {
- old_err = err;
- *pred = temp_pred;
- }
- }
- *podf = (div + *pred - 1) / *pred;
- } else if (div < 8) {
- *pred = div;
- *podf = 1;
- }
-}
-
-static int _clk_enable(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg |= 0x3 << clk->enable_shift;
- writel_relaxed(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg &= ~(0x3 << clk->enable_shift);
- writel_relaxed(reg, clk->enable_reg);
-}
-
-static int _clk_enable_1b(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg |= 0x1 << clk->enable_shift;
- writel_relaxed(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_disable_1b(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg &= ~(0x1 << clk->enable_shift);
- writel_relaxed(reg, clk->enable_reg);
-}
-
-struct divider {
- struct clk *clk;
- void __iomem *reg;
- u32 bp_pred;
- u32 bm_pred;
- u32 bp_podf;
- u32 bm_podf;
-};
-
-#define DEF_CLK_DIV1(d, c, r, b) \
- static struct divider d = { \
- .clk = c, \
- .reg = r, \
- .bp_podf = BP_##r##_##b##_PODF, \
- .bm_podf = BM_##r##_##b##_PODF, \
- }
-
-DEF_CLK_DIV1(arm_div, &arm_clk, CACRR, ARM);
-DEF_CLK_DIV1(ipg_div, &ipg_clk, CBCDR, IPG);
-DEF_CLK_DIV1(ahb_div, &ahb_clk, CBCDR, AHB);
-DEF_CLK_DIV1(axi_div, &axi_clk, CBCDR, AXI);
-DEF_CLK_DIV1(mmdc_ch0_axi_div, &mmdc_ch0_axi_clk, CBCDR, MMDC_CH0_AXI);
-DEF_CLK_DIV1(mmdc_ch1_axi_div, &mmdc_ch1_axi_clk, CBCDR, MMDC_CH1_AXI);
-DEF_CLK_DIV1(periph_clk2_div, &periph_clk2_clk, CBCDR, PERIPH_CLK2);
-DEF_CLK_DIV1(periph2_clk2_div, &periph2_clk2_clk, CBCDR, PERIPH2_CLK2);
-DEF_CLK_DIV1(gpu2d_core_div, &gpu2d_core_clk, CBCMR, GPU2D_CORE);
-DEF_CLK_DIV1(gpu3d_core_div, &gpu3d_core_clk, CBCMR, GPU3D_CORE);
-DEF_CLK_DIV1(gpu3d_shader_div, &gpu3d_shader_clk, CBCMR, GPU3D_SHADER);
-DEF_CLK_DIV1(ipg_perclk_div, &ipg_perclk, CSCMR1, PERCLK);
-DEF_CLK_DIV1(emi_div, &emi_clk, CSCMR1, EMI);
-DEF_CLK_DIV1(emi_slow_div, &emi_slow_clk, CSCMR1, EMI_SLOW);
-DEF_CLK_DIV1(can_div, &can1_clk, CSCMR2, CAN);
-DEF_CLK_DIV1(uart_div, &uart_clk, CSCDR1, UART);
-DEF_CLK_DIV1(usdhc1_div, &usdhc1_clk, CSCDR1, USDHC1);
-DEF_CLK_DIV1(usdhc2_div, &usdhc2_clk, CSCDR1, USDHC2);
-DEF_CLK_DIV1(usdhc3_div, &usdhc3_clk, CSCDR1, USDHC3);
-DEF_CLK_DIV1(usdhc4_div, &usdhc4_clk, CSCDR1, USDHC4);
-DEF_CLK_DIV1(vpu_div, &vpu_clk, CSCDR1, VPU_AXI);
-DEF_CLK_DIV1(hsi_tx_div, &hsi_tx_clk, CDCDR, HSI_TX);
-DEF_CLK_DIV1(ipu1_di0_pre_div, &ipu1_di0_pre_clk, CHSCCDR, IPU1_DI0_PRE);
-DEF_CLK_DIV1(ipu1_di1_pre_div, &ipu1_di1_pre_clk, CHSCCDR, IPU1_DI1_PRE);
-DEF_CLK_DIV1(ipu2_di0_pre_div, &ipu2_di0_pre_clk, CSCDR2, IPU2_DI0_PRE);
-DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
-DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
-DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
-DEF_CLK_DIV1(cko1_div, &cko1_clk, CCOSR, CKO1);
-
-#define DEF_CLK_DIV2(d, c, r, b) \
- static struct divider d = { \
- .clk = c, \
- .reg = r, \
- .bp_pred = BP_##r##_##b##_PRED, \
- .bm_pred = BM_##r##_##b##_PRED, \
- .bp_podf = BP_##r##_##b##_PODF, \
- .bm_podf = BM_##r##_##b##_PODF, \
- }
-
-DEF_CLK_DIV2(ssi1_div, &ssi1_clk, CS1CDR, SSI1);
-DEF_CLK_DIV2(ssi3_div, &ssi3_clk, CS1CDR, SSI3);
-DEF_CLK_DIV2(esai_div, &esai_clk, CS1CDR, ESAI);
-DEF_CLK_DIV2(ssi2_div, &ssi2_clk, CS2CDR, SSI2);
-DEF_CLK_DIV2(enfc_div, &enfc_clk, CS2CDR, ENFC);
-DEF_CLK_DIV2(spdif_div, &spdif_clk, CDCDR, SPDIF);
-DEF_CLK_DIV2(asrc_serial_div, &asrc_serial_clk, CDCDR, ASRC_SERIAL);
-
-static struct divider *dividers[] = {
- &arm_div,
- &ipg_div,
- &ahb_div,
- &axi_div,
- &mmdc_ch0_axi_div,
- &mmdc_ch1_axi_div,
- &periph_clk2_div,
- &periph2_clk2_div,
- &gpu2d_core_div,
- &gpu3d_core_div,
- &gpu3d_shader_div,
- &ipg_perclk_div,
- &emi_div,
- &emi_slow_div,
- &can_div,
- &uart_div,
- &usdhc1_div,
- &usdhc2_div,
- &usdhc3_div,
- &usdhc4_div,
- &vpu_div,
- &hsi_tx_div,
- &ipu1_di0_pre_div,
- &ipu1_di1_pre_div,
- &ipu2_di0_pre_div,
- &ipu2_di1_pre_div,
- &ipu1_div,
- &ipu2_div,
- &ssi1_div,
- &ssi3_div,
- &esai_div,
- &ssi2_div,
- &enfc_div,
- &spdif_div,
- &asrc_serial_div,
- &cko1_div,
-};
-
-static unsigned long ldb_di_clk_get_rate(struct clk *clk)
-{
- u32 val = readl_relaxed(CSCMR2);
-
- val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
- BM_CSCMR2_LDB_DI1_IPU_DIV;
- if (val)
- return clk_get_rate(clk->parent) / 7;
- else
- return clk_get_rate(clk->parent) * 2 / 7;
-}
-
-static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- u32 val = readl_relaxed(CSCMR2);
-
- if (rate * 7 <= parent_rate + parent_rate / 20)
- val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
- else
- val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
-
- writel_relaxed(val, CSCMR2);
-
- return 0;
-}
-
-static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
-
- if (rate * 7 <= parent_rate + parent_rate / 20)
- return parent_rate / 7;
- else
- return 2 * parent_rate / 7;
-}
-
-static unsigned long _clk_get_rate(struct clk *clk)
-{
- struct divider *d;
- u32 val, pred, podf;
- int i, num;
-
- if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
- return ldb_di_clk_get_rate(clk);
-
- num = ARRAY_SIZE(dividers);
- for (i = 0; i < num; i++)
- if (dividers[i]->clk == clk) {
- d = dividers[i];
- break;
- }
- if (i == num)
- return clk_get_rate(clk->parent);
-
- val = readl_relaxed(d->reg);
- pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
- podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
-
- return clk_get_rate(clk->parent) / (pred * podf);
-}
-
-static int clk_busy_wait(struct clk *clk)
-{
- int timeout = 0x100000;
- u32 bm;
-
- if (clk == &axi_clk)
- bm = BM_CDHIPR_AXI_PODF_BUSY;
- else if (clk == &ahb_clk)
- bm = BM_CDHIPR_AHB_PODF_BUSY;
- else if (clk == &mmdc_ch0_axi_clk)
- bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
- else if (clk == &periph_clk)
- bm = BM_CDHIPR_PERIPH_SEL_BUSY;
- else if (clk == &arm_clk)
- bm = BM_CDHIPR_ARM_PODF_BUSY;
- else
- return -EINVAL;
-
- while ((readl_relaxed(CDHIPR) & bm) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- return -EBUSY;
-
- return 0;
-}
-
-static int _clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- struct divider *d;
- u32 val, div, max_div, pred = 0, podf;
- int i, num;
-
- if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
- return ldb_di_clk_set_rate(clk, rate);
-
- num = ARRAY_SIZE(dividers);
- for (i = 0; i < num; i++)
- if (dividers[i]->clk == clk) {
- d = dividers[i];
- break;
- }
- if (i == num)
- return -EINVAL;
-
- max_div = ((d->bm_pred >> d->bp_pred) + 1) *
- ((d->bm_podf >> d->bp_podf) + 1);
-
- div = parent_rate / rate;
- if (div == 0)
- div++;
-
- if ((parent_rate / div != rate) || div > max_div)
- return -EINVAL;
-
- if (d->bm_pred) {
- calc_pred_podf_dividers(div, &pred, &podf);
- } else {
- pred = 1;
- podf = div;
- }
-
- val = readl_relaxed(d->reg);
- val &= ~(d->bm_pred | d->bm_podf);
- val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
- writel_relaxed(val, d->reg);
-
- if (clk == &axi_clk || clk == &ahb_clk ||
- clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
- return clk_busy_wait(clk);
-
- return 0;
-}
-
-static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- u32 div = parent_rate / rate;
- u32 div_max, pred = 0, podf;
- struct divider *d;
- int i, num;
-
- if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
- return ldb_di_clk_round_rate(clk, rate);
-
- num = ARRAY_SIZE(dividers);
- for (i = 0; i < num; i++)
- if (dividers[i]->clk == clk) {
- d = dividers[i];
- break;
- }
- if (i == num)
- return -EINVAL;
-
- if (div == 0 || parent_rate % rate)
- div++;
-
- if (d->bm_pred) {
- calc_pred_podf_dividers(div, &pred, &podf);
- div = pred * podf;
- } else {
- div_max = (d->bm_podf >> d->bp_podf) + 1;
- if (div > div_max)
- div = div_max;
- }
-
- return parent_rate / div;
-}
-
-struct multiplexer {
- struct clk *clk;
- void __iomem *reg;
- u32 bp;
- u32 bm;
- int pnum;
- struct clk *parents[];
-};
-
-static struct multiplexer axi_mux = {
- .clk = &axi_clk,
- .reg = CBCDR,
- .bp = BP_CBCDR_AXI_SEL,
- .bm = BM_CBCDR_AXI_SEL,
- .parents = {
- &periph_clk,
- &pll2_pfd_400m,
- &pll3_pfd_540m,
- NULL
- },
-};
-
-static struct multiplexer periph_mux = {
- .clk = &periph_clk,
- .reg = CBCDR,
- .bp = BP_CBCDR_PERIPH_CLK_SEL,
- .bm = BM_CBCDR_PERIPH_CLK_SEL,
- .parents = {
- &periph_pre_clk,
- &periph_clk2_clk,
- NULL
- },
-};
-
-static struct multiplexer periph_pre_mux = {
- .clk = &periph_pre_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
- .bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
- .parents = {
- &pll2_bus,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- &pll2_200m,
- NULL
- },
-};
-
-static struct multiplexer periph_clk2_mux = {
- .clk = &periph_clk2_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PERIPH_CLK2_SEL,
- .bm = BM_CBCMR_PERIPH_CLK2_SEL,
- .parents = {
- &pll3_usb_otg,
- &osc_clk,
- NULL
- },
-};
-
-static struct multiplexer periph2_mux = {
- .clk = &periph2_clk,
- .reg = CBCDR,
- .bp = BP_CBCDR_PERIPH2_CLK_SEL,
- .bm = BM_CBCDR_PERIPH2_CLK_SEL,
- .parents = {
- &periph2_pre_clk,
- &periph2_clk2_clk,
- NULL
- },
-};
-
-static struct multiplexer periph2_pre_mux = {
- .clk = &periph2_pre_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
- .bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
- .parents = {
- &pll2_bus,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- &pll2_200m,
- NULL
- },
-};
-
-static struct multiplexer periph2_clk2_mux = {
- .clk = &periph2_clk2_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PERIPH2_CLK2_SEL,
- .bm = BM_CBCMR_PERIPH2_CLK2_SEL,
- .parents = {
- &pll3_usb_otg,
- &osc_clk,
- NULL
- },
-};
-
-static struct multiplexer gpu2d_axi_mux = {
- .clk = &gpu2d_axi_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU2D_AXI_SEL,
- .bm = BM_CBCMR_GPU2D_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer gpu3d_axi_mux = {
- .clk = &gpu3d_axi_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU3D_AXI_SEL,
- .bm = BM_CBCMR_GPU3D_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer gpu3d_core_mux = {
- .clk = &gpu3d_core_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU3D_CORE_SEL,
- .bm = BM_CBCMR_GPU3D_CORE_SEL,
- .parents = {
- &mmdc_ch0_axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_594m,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-static struct multiplexer gpu3d_shader_mux = {
- .clk = &gpu3d_shader_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU3D_SHADER_SEL,
- .bm = BM_CBCMR_GPU3D_SHADER_SEL,
- .parents = {
- &mmdc_ch0_axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_594m,
- &pll3_pfd_720m,
- NULL
- },
-};
-
-static struct multiplexer pcie_axi_mux = {
- .clk = &pcie_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PCIE_AXI_SEL,
- .bm = BM_CBCMR_PCIE_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer vdo_axi_mux = {
- .clk = &vdo_axi_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_VDO_AXI_SEL,
- .bm = BM_CBCMR_VDO_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer vpu_axi_mux = {
- .clk = &vpu_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_VPU_AXI_SEL,
- .bm = BM_CBCMR_VPU_AXI_SEL,
- .parents = {
- &axi_clk,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- NULL
- },
-};
-
-static struct multiplexer gpu2d_core_mux = {
- .clk = &gpu2d_core_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU2D_CORE_SEL,
- .bm = BM_CBCMR_GPU2D_CORE_SEL,
- .parents = {
- &axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_352m,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-#define DEF_SSI_MUX(id) \
- static struct multiplexer ssi##id##_mux = { \
- .clk = &ssi##id##_clk, \
- .reg = CSCMR1, \
- .bp = BP_CSCMR1_SSI##id##_SEL, \
- .bm = BM_CSCMR1_SSI##id##_SEL, \
- .parents = { \
- &pll3_pfd_508m, \
- &pll3_pfd_454m, \
- &pll4_audio, \
- NULL \
- }, \
- }
-
-DEF_SSI_MUX(1);
-DEF_SSI_MUX(2);
-DEF_SSI_MUX(3);
-
-#define DEF_USDHC_MUX(id) \
- static struct multiplexer usdhc##id##_mux = { \
- .clk = &usdhc##id##_clk, \
- .reg = CSCMR1, \
- .bp = BP_CSCMR1_USDHC##id##_SEL, \
- .bm = BM_CSCMR1_USDHC##id##_SEL, \
- .parents = { \
- &pll2_pfd_400m, \
- &pll2_pfd_352m, \
- NULL \
- }, \
- }
-
-DEF_USDHC_MUX(1);
-DEF_USDHC_MUX(2);
-DEF_USDHC_MUX(3);
-DEF_USDHC_MUX(4);
-
-static struct multiplexer emi_mux = {
- .clk = &emi_clk,
- .reg = CSCMR1,
- .bp = BP_CSCMR1_EMI_SEL,
- .bm = BM_CSCMR1_EMI_SEL,
- .parents = {
- &axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- NULL
- },
-};
-
-static struct multiplexer emi_slow_mux = {
- .clk = &emi_slow_clk,
- .reg = CSCMR1,
- .bp = BP_CSCMR1_EMI_SLOW_SEL,
- .bm = BM_CSCMR1_EMI_SLOW_SEL,
- .parents = {
- &axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- NULL
- },
-};
-
-static struct multiplexer esai_mux = {
- .clk = &esai_clk,
- .reg = CSCMR2,
- .bp = BP_CSCMR2_ESAI_SEL,
- .bm = BM_CSCMR2_ESAI_SEL,
- .parents = {
- &pll4_audio,
- &pll3_pfd_508m,
- &pll3_pfd_454m,
- &pll3_usb_otg,
- NULL
- },
-};
-
-#define DEF_LDB_DI_MUX(id) \
- static struct multiplexer ldb_di##id##_mux = { \
- .clk = &ldb_di##id##_clk, \
- .reg = CS2CDR, \
- .bp = BP_CS2CDR_LDB_DI##id##_SEL, \
- .bm = BM_CS2CDR_LDB_DI##id##_SEL, \
- .parents = { \
- &pll5_video, \
- &pll2_pfd_352m, \
- &pll2_pfd_400m, \
- &pll3_pfd_540m, \
- &pll3_usb_otg, \
- NULL \
- }, \
- }
-
-DEF_LDB_DI_MUX(0);
-DEF_LDB_DI_MUX(1);
-
-static struct multiplexer enfc_mux = {
- .clk = &enfc_clk,
- .reg = CS2CDR,
- .bp = BP_CS2CDR_ENFC_SEL,
- .bm = BM_CS2CDR_ENFC_SEL,
- .parents = {
- &pll2_pfd_352m,
- &pll2_bus,
- &pll3_usb_otg,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-static struct multiplexer spdif_mux = {
- .clk = &spdif_clk,
- .reg = CDCDR,
- .bp = BP_CDCDR_SPDIF_SEL,
- .bm = BM_CDCDR_SPDIF_SEL,
- .parents = {
- &pll4_audio,
- &pll3_pfd_508m,
- &pll3_pfd_454m,
- &pll3_usb_otg,
- NULL
- },
-};
-
-static struct multiplexer asrc_serial_mux = {
- .clk = &asrc_serial_clk,
- .reg = CDCDR,
- .bp = BP_CDCDR_ASRC_SERIAL_SEL,
- .bm = BM_CDCDR_ASRC_SERIAL_SEL,
- .parents = {
- &pll4_audio,
- &pll3_pfd_508m,
- &pll3_pfd_454m,
- &pll3_usb_otg,
- NULL
- },
-};
-
-static struct multiplexer hsi_tx_mux = {
- .clk = &hsi_tx_clk,
- .reg = CDCDR,
- .bp = BP_CDCDR_HSI_TX_SEL,
- .bm = BM_CDCDR_HSI_TX_SEL,
- .parents = {
- &pll3_120m,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-#define DEF_IPU_DI_PRE_MUX(r, i, d) \
- static struct multiplexer ipu##i##_di##d##_pre_mux = { \
- .clk = &ipu##i##_di##d##_pre_clk, \
- .reg = r, \
- .bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL, \
- .bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL, \
- .parents = { \
- &mmdc_ch0_axi_clk, \
- &pll3_usb_otg, \
- &pll5_video, \
- &pll2_pfd_352m, \
- &pll2_pfd_400m, \
- &pll3_pfd_540m, \
- NULL \
- }, \
- }
-
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_DI_MUX(r, i, d) \
- static struct multiplexer ipu##i##_di##d##_mux = { \
- .clk = &ipu##i##_di##d##_clk, \
- .reg = r, \
- .bp = BP_##r##_IPU##i##_DI##d##_SEL, \
- .bm = BM_##r##_IPU##i##_DI##d##_SEL, \
- .parents = { \
- &ipu##i##_di##d##_pre_clk, \
- &dummy_clk, \
- &dummy_clk, \
- &ldb_di0_clk, \
- &ldb_di1_clk, \
- NULL \
- }, \
- }
-
-DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_MUX(id) \
- static struct multiplexer ipu##id##_mux = { \
- .clk = &ipu##id##_clk, \
- .reg = CSCDR3, \
- .bp = BP_CSCDR3_IPU##id##_HSP_SEL, \
- .bm = BM_CSCDR3_IPU##id##_HSP_SEL, \
- .parents = { \
- &mmdc_ch0_axi_clk, \
- &pll2_pfd_400m, \
- &pll3_120m, \
- &pll3_pfd_540m, \
- NULL \
- }, \
- }
-
-DEF_IPU_MUX(1);
-DEF_IPU_MUX(2);
-
-static struct multiplexer cko1_mux = {
- .clk = &cko1_clk,
- .reg = CCOSR,
- .bp = BP_CCOSR_CKO1_SEL,
- .bm = BM_CCOSR_CKO1_SEL,
- .parents = {
- &pll3_usb_otg,
- &pll2_bus,
- &pll1_sys,
- &pll5_video,
- &dummy_clk,
- &axi_clk,
- &enfc_clk,
- &ipu1_di0_clk,
- &ipu1_di1_clk,
- &ipu2_di0_clk,
- &ipu2_di1_clk,
- &ahb_clk,
- &ipg_clk,
- &ipg_perclk,
- &ckil_clk,
- &pll4_audio,
- NULL
- },
-};
-
-static struct multiplexer *multiplexers[] = {
- &axi_mux,
- &periph_mux,
- &periph_pre_mux,
- &periph_clk2_mux,
- &periph2_mux,
- &periph2_pre_mux,
- &periph2_clk2_mux,
- &gpu2d_axi_mux,
- &gpu3d_axi_mux,
- &gpu3d_core_mux,
- &gpu3d_shader_mux,
- &pcie_axi_mux,
- &vdo_axi_mux,
- &vpu_axi_mux,
- &gpu2d_core_mux,
- &ssi1_mux,
- &ssi2_mux,
- &ssi3_mux,
- &usdhc1_mux,
- &usdhc2_mux,
- &usdhc3_mux,
- &usdhc4_mux,
- &emi_mux,
- &emi_slow_mux,
- &esai_mux,
- &ldb_di0_mux,
- &ldb_di1_mux,
- &enfc_mux,
- &spdif_mux,
- &asrc_serial_mux,
- &hsi_tx_mux,
- &ipu1_di0_pre_mux,
- &ipu1_di0_mux,
- &ipu1_di1_pre_mux,
- &ipu1_di1_mux,
- &ipu2_di0_pre_mux,
- &ipu2_di0_mux,
- &ipu2_di1_pre_mux,
- &ipu2_di1_mux,
- &ipu1_mux,
- &ipu2_mux,
- &cko1_mux,
-};
-
-static int _clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct multiplexer *m;
- int i, num;
- u32 val;
-
- num = ARRAY_SIZE(multiplexers);
- for (i = 0; i < num; i++)
- if (multiplexers[i]->clk == clk) {
- m = multiplexers[i];
- break;
- }
- if (i == num)
- return -EINVAL;
-
- i = 0;
- while (m->parents[i]) {
- if (parent == m->parents[i])
- break;
- i++;
- }
- if (!m->parents[i] || m->parents[i] == &dummy_clk)
- return -EINVAL;
-
- val = readl_relaxed(m->reg);
- val &= ~m->bm;
- val |= i << m->bp;
- writel_relaxed(val, m->reg);
-
- if (clk == &periph_clk)
- return clk_busy_wait(clk);
-
- return 0;
-}
-
-#define DEF_NG_CLK(name, p) \
- static struct clk name = { \
- .get_rate = _clk_get_rate, \
- .set_rate = _clk_set_rate, \
- .round_rate = _clk_round_rate, \
- .set_parent = _clk_set_parent, \
- .parent = p, \
- }
-
-DEF_NG_CLK(periph_clk2_clk, &osc_clk);
-DEF_NG_CLK(periph_pre_clk, &pll2_bus);
-DEF_NG_CLK(periph_clk, &periph_pre_clk);
-DEF_NG_CLK(periph2_clk2_clk, &osc_clk);
-DEF_NG_CLK(periph2_pre_clk, &pll2_bus);
-DEF_NG_CLK(periph2_clk, &periph2_pre_clk);
-DEF_NG_CLK(axi_clk, &periph_clk);
-DEF_NG_CLK(emi_clk, &axi_clk);
-DEF_NG_CLK(arm_clk, &pll1_sw_clk);
-DEF_NG_CLK(ahb_clk, &periph_clk);
-DEF_NG_CLK(ipg_clk, &ahb_clk);
-DEF_NG_CLK(ipg_perclk, &ipg_clk);
-DEF_NG_CLK(ipu1_di0_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(ipu1_di1_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di0_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di1_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(asrc_serial_clk, &pll3_usb_otg);
-
-#define DEF_CLK(name, er, es, p, s) \
- static struct clk name = { \
- .enable_reg = er, \
- .enable_shift = es, \
- .enable = _clk_enable, \
- .disable = _clk_disable, \
- .get_rate = _clk_get_rate, \
- .set_rate = _clk_set_rate, \
- .round_rate = _clk_round_rate, \
- .set_parent = _clk_set_parent, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEF_CLK_1B(name, er, es, p, s) \
- static struct clk name = { \
- .enable_reg = er, \
- .enable_shift = es, \
- .enable = _clk_enable_1b, \
- .disable = _clk_disable_1b, \
- .get_rate = _clk_get_rate, \
- .set_rate = _clk_set_rate, \
- .round_rate = _clk_round_rate, \
- .set_parent = _clk_set_parent, \
- .parent = p, \
- .secondary = s, \
- }
-
-DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
-DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
-DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
-DEF_CLK(asrc_clk, CCGR0, CG3, &pll4_audio, NULL);
-DEF_CLK(can1_serial_clk, CCGR0, CG8, &pll3_usb_otg, NULL);
-DEF_CLK(can1_clk, CCGR0, CG7, &pll3_usb_otg, &can1_serial_clk);
-DEF_CLK(can2_serial_clk, CCGR0, CG10, &pll3_usb_otg, NULL);
-DEF_CLK(can2_clk, CCGR0, CG9, &pll3_usb_otg, &can2_serial_clk);
-DEF_CLK(ecspi1_clk, CCGR1, CG0, &pll3_60m, NULL);
-DEF_CLK(ecspi2_clk, CCGR1, CG1, &pll3_60m, NULL);
-DEF_CLK(ecspi3_clk, CCGR1, CG2, &pll3_60m, NULL);
-DEF_CLK(ecspi4_clk, CCGR1, CG3, &pll3_60m, NULL);
-DEF_CLK(ecspi5_clk, CCGR1, CG4, &pll3_60m, NULL);
-DEF_CLK(enet_clk, CCGR1, CG5, &ipg_clk, NULL);
-DEF_CLK(esai_clk, CCGR1, CG8, &pll3_usb_otg, NULL);
-DEF_CLK(gpt_serial_clk, CCGR1, CG11, &ipg_perclk, NULL);
-DEF_CLK(gpt_clk, CCGR1, CG10, &ipg_perclk, &gpt_serial_clk);
-DEF_CLK(gpu2d_core_clk, CCGR1, CG12, &pll2_pfd_352m, &gpu2d_axi_clk);
-DEF_CLK(gpu3d_core_clk, CCGR1, CG13, &pll2_pfd_594m, &gpu3d_axi_clk);
-DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m, &gpu3d_axi_clk);
-DEF_CLK(hdmi_iahb_clk, CCGR2, CG0, &ahb_clk, NULL);
-DEF_CLK(hdmi_isfr_clk, CCGR2, CG2, &pll3_pfd_540m, &hdmi_iahb_clk);
-DEF_CLK(i2c1_clk, CCGR2, CG3, &ipg_perclk, NULL);
-DEF_CLK(i2c2_clk, CCGR2, CG4, &ipg_perclk, NULL);
-DEF_CLK(i2c3_clk, CCGR2, CG5, &ipg_perclk, NULL);
-DEF_CLK(iim_clk, CCGR2, CG6, &ipg_clk, NULL);
-DEF_CLK(enfc_clk, CCGR2, CG7, &pll2_pfd_352m, NULL);
-DEF_CLK(ipu1_clk, CCGR3, CG0, &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu1_di0_clk, CCGR3, CG1, &ipu1_di0_pre_clk, NULL);
-DEF_CLK(ipu1_di1_clk, CCGR3, CG2, &ipu1_di1_pre_clk, NULL);
-DEF_CLK(ipu2_clk, CCGR3, CG3, &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu2_di0_clk, CCGR3, CG4, &ipu2_di0_pre_clk, NULL);
-DEF_CLK(ipu2_di1_clk, CCGR3, CG5, &ipu2_di1_pre_clk, NULL);
-DEF_CLK(ldb_di0_clk, CCGR3, CG6, &pll3_pfd_540m, NULL);
-DEF_CLK(ldb_di1_clk, CCGR3, CG7, &pll3_pfd_540m, NULL);
-DEF_CLK(hsi_tx_clk, CCGR3, CG8, &pll2_pfd_400m, NULL);
-DEF_CLK(mlb_clk, CCGR3, CG9, &pll6_mlb, NULL);
-DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk, NULL);
-DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk, &mmdc_ch0_ipg_clk);
-DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk, NULL);
-DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk, &mmdc_ch1_ipg_clk);
-DEF_CLK(openvg_axi_clk, CCGR3, CG13, &axi_clk, NULL);
-DEF_CLK(pwm1_clk, CCGR4, CG8, &ipg_perclk, NULL);
-DEF_CLK(pwm2_clk, CCGR4, CG9, &ipg_perclk, NULL);
-DEF_CLK(pwm3_clk, CCGR4, CG10, &ipg_perclk, NULL);
-DEF_CLK(pwm4_clk, CCGR4, CG11, &ipg_perclk, NULL);
-DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk, NULL);
-DEF_CLK(gpmi_bch_clk, CCGR4, CG13, &usdhc4_clk, &gpmi_bch_apb_clk);
-DEF_CLK(gpmi_apb_clk, CCGR4, CG15, &usdhc3_clk, &gpmi_bch_clk);
-DEF_CLK(gpmi_io_clk, CCGR4, CG14, &enfc_clk, &gpmi_apb_clk);
-DEF_CLK(sdma_clk, CCGR5, CG3, &ahb_clk, NULL);
-DEF_CLK(spba_clk, CCGR5, CG6, &ipg_clk, NULL);
-DEF_CLK(spdif_clk, CCGR5, CG7, &pll3_usb_otg, &spba_clk);
-DEF_CLK(ssi1_clk, CCGR5, CG9, &pll3_pfd_508m, NULL);
-DEF_CLK(ssi2_clk, CCGR5, CG10, &pll3_pfd_508m, NULL);
-DEF_CLK(ssi3_clk, CCGR5, CG11, &pll3_pfd_508m, NULL);
-DEF_CLK(uart_serial_clk, CCGR5, CG13, &pll3_usb_otg, NULL);
-DEF_CLK(uart_clk, CCGR5, CG12, &pll3_80m, &uart_serial_clk);
-DEF_CLK(usboh3_clk, CCGR6, CG0, &ipg_clk, NULL);
-DEF_CLK(usdhc1_clk, CCGR6, CG1, &pll2_pfd_400m, NULL);
-DEF_CLK(usdhc2_clk, CCGR6, CG2, &pll2_pfd_400m, NULL);
-DEF_CLK(usdhc3_clk, CCGR6, CG3, &pll2_pfd_400m, NULL);
-DEF_CLK(usdhc4_clk, CCGR6, CG4, &pll2_pfd_400m, NULL);
-DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
-DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
-DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
-DEF_CLK_1B(cko1_clk, CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
-
-static int pcie_clk_enable(struct clk *clk)
-{
- u32 val;
-
- val = readl_relaxed(PLL8_ENET);
- val |= BM_PLL_ENET_EN_PCIE;
- writel_relaxed(val, PLL8_ENET);
-
- return _clk_enable(clk);
-}
-
-static void pcie_clk_disable(struct clk *clk)
-{
- u32 val;
-
- _clk_disable(clk);
-
- val = readl_relaxed(PLL8_ENET);
- val &= BM_PLL_ENET_EN_PCIE;
- writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk pcie_clk = {
- .enable_reg = CCGR4,
- .enable_shift = CG0,
- .enable = pcie_clk_enable,
- .disable = pcie_clk_disable,
- .set_parent = _clk_set_parent,
- .parent = &axi_clk,
- .secondary = &pll8_enet,
-};
-
-static int sata_clk_enable(struct clk *clk)
-{
- u32 val;
-
- val = readl_relaxed(PLL8_ENET);
- val |= BM_PLL_ENET_EN_SATA;
- writel_relaxed(val, PLL8_ENET);
-
- return _clk_enable(clk);
-}
-
-static void sata_clk_disable(struct clk *clk)
-{
- u32 val;
-
- _clk_disable(clk);
-
- val = readl_relaxed(PLL8_ENET);
- val &= BM_PLL_ENET_EN_SATA;
- writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk sata_clk = {
- .enable_reg = CCGR5,
- .enable_shift = CG2,
- .enable = sata_clk_enable,
- .disable = sata_clk_disable,
- .parent = &ipg_clk,
- .secondary = &pll8_enet,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- }
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
- _REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
- _REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
- _REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
- _REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
- _REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
- _REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
- _REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
- _REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
- _REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
- _REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
- _REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
- _REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
- _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
- _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
- _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
- _REGISTER_CLOCK("smp_twd", NULL, twd_clk),
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk),
- _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
- _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
- _REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
- _REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
- _REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
- _REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
- _REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
- _REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
- _REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
- _REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
- _REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
- _REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
- _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
- _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
- _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
- _REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
-};
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
- u32 val = readl_relaxed(CLPCR);
-
- val &= ~BM_CLPCR_LPM;
- switch (mode) {
- case WAIT_CLOCKED:
- break;
- case WAIT_UNCLOCKED:
- val |= 0x1 << BP_CLPCR_LPM;
- break;
- case STOP_POWER_ON:
- val |= 0x2 << BP_CLPCR_LPM;
- break;
- case WAIT_UNCLOCKED_POWER_OFF:
- val |= 0x1 << BP_CLPCR_LPM;
- val &= ~BM_CLPCR_VSTBY;
- val &= ~BM_CLPCR_SBYOS;
- break;
- case STOP_POWER_OFF:
- val |= 0x2 << BP_CLPCR_LPM;
- val |= 0x3 << BP_CLPCR_STBY_COUNT;
- val |= BM_CLPCR_VSTBY;
- val |= BM_CLPCR_SBYOS;
- break;
- default:
- return -EINVAL;
- }
- writel_relaxed(val, CLPCR);
-
- return 0;
-}
-
-static struct map_desc imx6q_clock_desc[] = {
- imx_map_entry(MX6Q, CCM, MT_DEVICE),
- imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
-};
-
-void __init imx6q_clock_map_io(void)
-{
- iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-}
-
-int __init mx6q_clocks_init(void)
-{
- struct device_node *np;
- void __iomem *base;
- int i, irq;
-
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(np, "fsl,imx-ckil"))
- external_low_reference = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
- external_high_reference = rate;
- else if (of_device_is_compatible(np, "fsl,imx-osc"))
- oscillator_reference = rate;
- }
-
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
-
- /* only keep necessary clocks on */
- writel_relaxed(0x3 << CG0 | 0x3 << CG1 | 0x3 << CG2, CCGR0);
- writel_relaxed(0x3 << CG8 | 0x3 << CG9 | 0x3 << CG10, CCGR2);
- writel_relaxed(0x3 << CG10 | 0x3 << CG12, CCGR3);
- writel_relaxed(0x3 << CG4 | 0x3 << CG6 | 0x3 << CG7, CCGR4);
- writel_relaxed(0x3 << CG0, CCGR5);
- writel_relaxed(0, CCGR6);
- writel_relaxed(0, CCGR7);
-
- clk_enable(&uart_clk);
- clk_enable(&mmdc_ch0_axi_clk);
-
- clk_set_rate(&pll4_audio, FREQ_650M);
- clk_set_rate(&pll5_video, FREQ_650M);
- clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
- clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
- clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
- clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
- clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
- clk_set_rate(&gpu3d_core_clk, FREQ_528M);
- clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
- clk_set_rate(&asrc_serial_clk, 1500000);
- clk_set_rate(&enfc_clk, 11000000);
-
- /*
- * Before pinctrl API is available, we have to rely on the pad
- * configuration set up by bootloader. For usdhc example here,
- * u-boot sets up the pads for 49.5 MHz case, and we have to lower
- * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
- *
- * FIXME: This is should be removed after pinctrl API is available.
- * At that time, usdhc driver can call pinctrl API to change pad
- * configuration dynamically per different usdhc clock settings.
- */
- clk_set_rate(&usdhc1_clk, 49500000);
- clk_set_rate(&usdhc2_clk, 49500000);
- clk_set_rate(&usdhc3_clk, 49500000);
- clk_set_rate(&usdhc4_clk, 49500000);
-
- clk_set_parent(&cko1_clk, &ahb_clk);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(&gpt_clk, base, irq);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
deleted file mode 100644
index 0847050..0000000
--- a/arch/arm/mach-imx/clock-mx51-mx53.c
+++ /dev/null
@@ -1,1675 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "crm-regs-imx5.h"
-
-/* External clock values passed-in by the board code */
-static unsigned long external_high_reference, external_low_reference;
-static unsigned long oscillator_reference, ckih2_reference;
-
-static struct clk osc_clk;
-static struct clk pll1_main_clk;
-static struct clk pll1_sw_clk;
-static struct clk pll2_sw_clk;
-static struct clk pll3_sw_clk;
-static struct clk mx53_pll4_sw_clk;
-static struct clk lp_apm_clk;
-static struct clk periph_apm_clk;
-static struct clk ahb_clk;
-static struct clk ipg_clk;
-static struct clk usboh3_clk;
-static struct clk emi_fast_clk;
-static struct clk ipu_clk;
-static struct clk mipi_hsc1_clk;
-static struct clk esdhc1_clk;
-static struct clk esdhc2_clk;
-static struct clk esdhc3_mx53_clk;
-
-#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
-
-/* calculate best pre and post dividers to get the required divider */
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
- u32 max_pre, u32 max_post)
-{
- if (div >= max_pre * max_post) {
- *pre = max_pre;
- *post = max_post;
- } else if (div >= max_pre) {
- u32 min_pre, temp_pre, old_err, err;
- min_pre = DIV_ROUND_UP(div, max_post);
- old_err = max_pre;
- for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = DIV_ROUND_UP(div, *pre);
- } else {
- *pre = div;
- *post = 1;
- }
-}
-
-static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
-{
- u32 reg = __raw_readl(clk->enable_reg);
-
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- reg |= mode << clk->enable_shift;
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_ccgr_enable(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
- return 0;
-}
-
-static void _clk_ccgr_disable(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
-}
-
-static int _clk_ccgr_enable_inrun(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
- return 0;
-}
-
-static void _clk_ccgr_disable_inwait(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-}
-
-/*
- * For the 4-to-1 muxed input clock
- */
-static inline u32 _get_mux(struct clk *parent, struct clk *m0,
- struct clk *m1, struct clk *m2, struct clk *m3)
-{
- if (parent == m0)
- return 0;
- else if (parent == m1)
- return 1;
- else if (parent == m2)
- return 2;
- else if (parent == m3)
- return 3;
- else
- BUG();
-
- return -EINVAL;
-}
-
-static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
-{
- if (pll == &pll1_main_clk)
- return MX51_DPLL1_BASE;
- else if (pll == &pll2_sw_clk)
- return MX51_DPLL2_BASE;
- else if (pll == &pll3_sw_clk)
- return MX51_DPLL3_BASE;
- else
- BUG();
-
- return NULL;
-}
-
-static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
-{
- if (pll == &pll1_main_clk)
- return MX53_DPLL1_BASE;
- else if (pll == &pll2_sw_clk)
- return MX53_DPLL2_BASE;
- else if (pll == &pll3_sw_clk)
- return MX53_DPLL3_BASE;
- else if (pll == &mx53_pll4_sw_clk)
- return MX53_DPLL4_BASE;
- else
- BUG();
-
- return NULL;
-}
-
-static inline void __iomem *_get_pll_base(struct clk *pll)
-{
- if (cpu_is_mx51())
- return _mx51_get_pll_base(pll);
- else
- return _mx53_get_pll_base(pll);
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
- long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
- s64 temp;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pllbase = _get_pll_base(clk);
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
- pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
- mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
- /* Sign extend to 32-bits */
- if (mfn >= 0x04000000) {
- mfn |= 0xFC000000;
- mfn_abs = -mfn;
- }
-
- ref_clk = 2 * parent_rate;
- if (dbl != 0)
- ref_clk *= 2;
-
- ref_clk /= (pdf + 1);
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd + 1);
- if (mfn < 0)
- temp = -temp;
- temp = (ref_clk * mfi) + temp;
-
- return temp;
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- void __iomem *pllbase;
-
- long mfi, pdf, mfn, mfd = 999999;
- s64 temp64;
- unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pllbase = _get_pll_base(clk);
-
- quad_parent_rate = 4 * parent_rate;
- pdf = mfi = -1;
- while (++pdf < 16 && mfi < 5)
- mfi = rate * (pdf+1) / quad_parent_rate;
- if (mfi > 15)
- return -EINVAL;
- pdf--;
-
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
- mfn = (long)temp64;
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- /* use dpdck0_2 */
- __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
-
- return 0;
-}
-
-static int _clk_pll_enable(struct clk *clk)
-{
- u32 reg;
- void __iomem *pllbase;
- int i = 0;
-
- pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_UPEN)
- return 0;
-
- reg |= MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_LRF)
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: pll locking failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void _clk_pll_disable(struct clk *clk)
-{
- u32 reg;
- void __iomem *pllbase;
-
- pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg, step;
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- /* When switching from pll_main_clk to a bypass clock, first select a
- * multiplexed clock in 'step_sel', then shift the glitchless mux
- * 'pll1_sw_clk_sel'.
- *
- * When switching back, do it in reverse order
- */
- if (parent == &pll1_main_clk) {
- /* Switch to pll1_main_clk */
- reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
- __raw_writel(reg, MXC_CCM_CCSR);
- /* step_clk mux switched to lp_apm, to save power. */
- reg = __raw_readl(MXC_CCM_CCSR);
- reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
- reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
- MXC_CCM_CCSR_STEP_SEL_OFFSET);
- } else {
- if (parent == &lp_apm_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
- } else if (parent == &pll2_sw_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
- } else if (parent == &pll3_sw_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
- } else
- return -EINVAL;
-
- reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
- reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
-
- __raw_writel(reg, MXC_CCM_CCSR);
- /* Switch to step_clk */
- reg = __raw_readl(MXC_CCM_CCSR);
- reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
- }
- __raw_writel(reg, MXC_CCM_CCSR);
- return 0;
-}
-
-static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- if (clk->parent == &pll2_sw_clk) {
- div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
- MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
- } else if (clk->parent == &pll3_sw_clk) {
- div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
- MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
- } else
- div = 1;
- return parent_rate / div;
-}
-
-static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- if (parent == &pll2_sw_clk)
- reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
- else
- reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-
- __raw_writel(reg, MXC_CCM_CCSR);
- return 0;
-}
-
-static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- if (parent == &osc_clk)
- reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CCSR);
-
- return 0;
-}
-
-static unsigned long clk_cpu_get_rate(struct clk *clk)
-{
- u32 cacrr, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- cacrr = __raw_readl(MXC_CCM_CACRR);
- div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
-
- return parent_rate / div;
-}
-
-static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, cpu_podf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- cpu_podf = parent_rate / rate - 1;
- /* use post divider to change freq */
- reg = __raw_readl(MXC_CCM_CACRR);
- reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
- reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CACRR);
-
- return 0;
-}
-
-static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg, mux;
- int i = 0;
-
- mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
-
- reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
- reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCMR);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(MXC_CCM_CDHIPR);
- if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: Set parent for periph_apm clock failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
-
- if (parent == &pll2_sw_clk)
- reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
- else if (parent == &periph_apm_clk)
- reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- return 0;
-}
-
-static struct clk main_bus_clk = {
- .parent = &pll2_sw_clk,
- .set_parent = _clk_main_bus_set_parent,
-};
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
- MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
- return parent_rate / div;
-}
-
-
-static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div;
- unsigned long parent_rate;
- int i = 0;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
- reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(MXC_CCM_CDHIPR);
- if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: clk_ahb_set_rate failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static unsigned long _clk_ahb_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8)
- div = 8;
- else if (div == 0)
- div++;
- return parent_rate / div;
-}
-
-
-static int _clk_max_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
-
- /* Handshake with MAX when LPM is entered. */
- reg = __raw_readl(MXC_CCM_CLPCR);
- if (cpu_is_mx51())
- reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- else if (cpu_is_mx53())
- reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void _clk_max_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable_inwait(clk);
-
- /* No Handshake with MAX when LPM is entered as its disabled. */
- reg = __raw_readl(MXC_CCM_CLPCR);
- if (cpu_is_mx51())
- reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- else if (cpu_is_mx53())
- reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
- MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
-
- return parent_rate / div;
-}
-
-static unsigned long clk_ipg_per_get_rate(struct clk *clk)
-{
- u32 reg, prediv1, prediv2, podf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
- /* the main_bus_clk is the one before the DVFS engine */
- reg = __raw_readl(MXC_CCM_CBCDR);
- prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
- prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
- podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
- return parent_rate / (prediv1 * prediv2 * podf);
- } else if (clk->parent == &ipg_clk)
- return parent_rate;
- else
- BUG();
-}
-
-static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CBCMR);
-
- reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
- reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-
- if (parent == &ipg_clk)
- reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
- else if (parent == &lp_apm_clk)
- reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
- else if (parent != &main_bus_clk)
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CBCMR);
-
- return 0;
-}
-
-#define clk_nfc_set_parent NULL
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
- unsigned long rate;
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
- MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
- rate = clk_get_rate(clk->parent) / div;
- WARN_ON(rate == 0);
- return rate;
-}
-
-static unsigned long clk_nfc_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate = clk_get_rate(clk->parent);
-
- if (!rate)
- return -EINVAL;
-
- div = parent_rate / rate;
-
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- return -EINVAL;
-
- return parent_rate / div;
-
-}
-
-static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div;
-
- div = clk_get_rate(clk->parent) / rate;
- if (div == 0)
- div++;
- if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
- reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- while (__raw_readl(MXC_CCM_CDHIPR) &
- MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
- }
-
- return 0;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
- return oscillator_reference;
-}
-
-static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
-{
- return ckih2_reference;
-}
-
-static unsigned long clk_emi_slow_get_rate(struct clk *clk)
-{
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
- MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
-{
- unsigned long rate;
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
- MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
- rate = clk_get_rate(clk->parent) / div;
-
- return rate;
-}
-
-/* External high frequency clock */
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk ckih2_clk = {
- .get_rate = get_ckih2_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
- .get_rate = get_oscillator_reference_clock_rate,
-};
-
-/* External low frequency (32kHz) clock */
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk pll1_main_clk = {
- .parent = &osc_clk,
- .get_rate = clk_pll_get_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* Clock tree block diagram (WIP):
- * CCM: Clock Controller Module
- *
- * PLL output -> |
- * | CCM Switcher -> CCM_CLK_ROOT_GEN ->
- * PLL bypass -> |
- *
- */
-
-/* PLL1 SW supplies to ARM core */
-static struct clk pll1_sw_clk = {
- .parent = &pll1_main_clk,
- .set_parent = _clk_pll1_sw_set_parent,
- .get_rate = clk_pll1_sw_get_rate,
-};
-
-/* PLL2 SW supplies to AXI/AHB/IP buses */
-static struct clk pll2_sw_clk = {
- .parent = &osc_clk,
- .get_rate = clk_pll_get_rate,
- .set_rate = _clk_pll_set_rate,
- .set_parent = _clk_pll2_sw_set_parent,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
-static struct clk pll3_sw_clk = {
- .parent = &osc_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = clk_pll_get_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
-static struct clk mx53_pll4_sw_clk = {
- .parent = &osc_clk,
- .set_rate = _clk_pll_set_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* Low-power Audio Playback Mode clock */
-static struct clk lp_apm_clk = {
- .parent = &osc_clk,
- .set_parent = _clk_lp_apm_set_parent,
-};
-
-static struct clk periph_apm_clk = {
- .parent = &pll1_sw_clk,
- .set_parent = _clk_periph_apm_set_parent,
-};
-
-static struct clk cpu_clk = {
- .parent = &pll1_sw_clk,
- .get_rate = clk_cpu_get_rate,
- .set_rate = clk_cpu_set_rate,
-};
-
-static struct clk ahb_clk = {
- .parent = &main_bus_clk,
- .get_rate = clk_ahb_get_rate,
- .set_rate = _clk_ahb_set_rate,
- .round_rate = _clk_ahb_round_rate,
-};
-
-static struct clk iim_clk = {
- .parent = &ipg_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
-};
-
-/* Main IP interface clock for access to registers */
-static struct clk ipg_clk = {
- .parent = &ahb_clk,
- .get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ipg_perclk = {
- .parent = &lp_apm_clk,
- .get_rate = clk_ipg_per_get_rate,
- .set_parent = _clk_ipg_per_set_parent,
-};
-
-static struct clk ahb_max_clk = {
- .parent = &ahb_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
-};
-
-static struct clk aips_tz1_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk aips_tz2_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk gpc_dvfs_clk = {
- .enable_reg = MXC_CCM_CCGR5,
- .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
-};
-
-static struct clk gpt_32k_clk = {
- .id = 0,
- .parent = &ckil_clk,
-};
-
-static struct clk dummy_clk = {
- .id = 0,
-};
-
-static struct clk emi_slow_clk = {
- .parent = &pll2_sw_clk,
- .enable_reg = MXC_CCM_CCGR5,
- .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
- .get_rate = clk_emi_slow_get_rate,
-};
-
-static int clk_ipu_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
-
- /* Enable handshake with IPU when certain clock rates are changed */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- /* Enable handshake with IPU when LPM is entered */
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void clk_ipu_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable(clk);
-
- /* Disable handshake with IPU whe dividers are changed */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg |= MXC_CCM_CCDR_IPU_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- /* Disable handshake with IPU when LPM is entered */
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk ahbmux1_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk ipu_sec_clk = {
- .parent = &emi_fast_clk,
- .secondary = &ahbmux1_clk,
-};
-
-static struct clk ddr_hf_clk = {
- .parent = &pll1_sw_clk,
- .get_rate = _clk_ddr_hf_get_rate,
-};
-
-static struct clk ddr_clk = {
- .parent = &ddr_hf_clk,
-};
-
-/* clock definitions for MIPI HSC unit which has been removed
- * from documentation, but not from hardware
- */
-static int _clk_hsc_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
- /* Handshake with IPU when certain clock rates are changed. */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void _clk_hsc_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable(clk);
- /* No handshake with HSC as its not enabled. */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg |= MXC_CCM_CCDR_HSC_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk mipi_hsp_clk = {
- .parent = &ipu_clk,
- .enable_reg = MXC_CCM_CCGR4,
- .enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
- .enable = _clk_hsc_enable,
- .disable = _clk_hsc_disable,
- .secondary = &mipi_hsc1_clk,
-};
-
-#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = pfx##_get_rate, \
- .set_rate = pfx##_set_rate, \
- .round_rate = pfx##_round_rate, \
- .set_parent = pfx##_set_parent, \
- .enable = _clk_ccgr_enable, \
- .disable = _clk_ccgr_disable, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = pfx##_get_rate, \
- .set_rate = pfx##_set_rate, \
- .set_parent = pfx##_set_parent, \
- .enable = _clk_max_enable, \
- .disable = _clk_max_disable, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define CLK_GET_RATE(name, nr, bitsname) \
-static unsigned long clk_##name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, pred, podf; \
- \
- reg = __raw_readl(MXC_CCM_CSCDR##nr); \
- pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK) \
- >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
- podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK) \
- >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
- \
- return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), \
- (pred + 1) * (podf + 1)); \
-}
-
-#define CLK_SET_PARENT(name, nr, bitsname) \
-static int clk_##name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- u32 reg, mux; \
- \
- mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, \
- &pll3_sw_clk, &lp_apm_clk); \
- reg = __raw_readl(MXC_CCM_CSCMR##nr) & \
- ~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK; \
- reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET; \
- __raw_writel(reg, MXC_CCM_CSCMR##nr); \
- \
- return 0; \
-}
-
-#define CLK_SET_RATE(name, nr, bitsname) \
-static int clk_##name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u32 reg, div, parent_rate; \
- u32 pre = 0, post = 0; \
- \
- parent_rate = clk_get_rate(clk->parent); \
- div = parent_rate / rate; \
- \
- if ((parent_rate / div) != rate) \
- return -EINVAL; \
- \
- __calc_pre_post_dividers(div, &pre, &post, \
- (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >> \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1, \
- (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >> \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
- \
- /* Set sdhc1 clock divider */ \
- reg = __raw_readl(MXC_CCM_CSCDR##nr) & \
- ~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK \
- | MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK); \
- reg |= (post - 1) << \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
- reg |= (pre - 1) << \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
- __raw_writel(reg, MXC_CCM_CSCDR##nr); \
- \
- return 0; \
-}
-
-/* UART */
-CLK_GET_RATE(uart, 1, UART)
-CLK_SET_PARENT(uart, 1, UART)
-
-static struct clk uart_root_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_uart_get_rate,
- .set_parent = clk_uart_set_parent,
-};
-
-/* USBOH3 */
-CLK_GET_RATE(usboh3, 1, USBOH3)
-CLK_SET_PARENT(usboh3, 1, USBOH3)
-
-static struct clk usboh3_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_usboh3_get_rate,
- .set_parent = clk_usboh3_set_parent,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-};
-
-static struct clk usb_ahb_clk = {
- .parent = &ipg_clk,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-};
-
-static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
-
- if (parent == &pll3_sw_clk)
- reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
-
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-static struct clk usb_phy1_clk = {
- .parent = &pll3_sw_clk,
- .set_parent = clk_usb_phy1_set_parent,
- .enable = _clk_ccgr_enable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
- .disable = _clk_ccgr_disable,
-};
-
-/* eCSPI */
-CLK_GET_RATE(ecspi, 2, CSPI)
-CLK_SET_PARENT(ecspi, 1, CSPI)
-
-static struct clk ecspi_main_clk = {
- .parent = &pll3_sw_clk,
- .get_rate = clk_ecspi_get_rate,
- .set_parent = clk_ecspi_set_parent,
-};
-
-/* eSDHC */
-CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-
-/* mx51 specific */
-CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-
-static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
- else if (parent == &esdhc2_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else if (parent == &esdhc2_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-/* mx53 specific */
-static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
- else if (parent == &esdhc3_mx53_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-
-static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else if (parent == &esdhc3_mx53_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = e, \
- .disable = d, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
- DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
-
-/* Shared peripheral bus arbiter */
-DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* UART */
-DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &uart_root_clk, &uart4_ipg_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, &uart_root_clk, &uart5_ipg_clk);
-
-/* GPT */
-DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, &gpt_ipg_clk);
-
-DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-
-/* I2C */
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-
-/* FEC */
-DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* NFC */
-DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
- clk_nfc, &emi_slow_clk, NULL);
-
-/* SSI */
-DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
-DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
-DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
-
-/* eCSPI */
-DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
- &ipg_clk, &spba_clk);
-DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
-DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
- &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
-
-/* CSPI */
-DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
- NULL, NULL, &ipg_clk, &cspi_ipg_clk);
-
-/* SDMA */
-DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
- NULL, NULL, &ahb_clk, NULL);
-
-/* eSDHC */
-DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
- clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
-DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-
-/* mx51 specific */
-DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
- clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc3_clk = {
- .id = 2,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc3_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc3_ipg_clk,
-};
-static struct clk esdhc4_clk = {
- .id = 3,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc4_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc4_ipg_clk,
-};
-
-/* mx53 specific */
-static struct clk esdhc2_mx53_clk = {
- .id = 2,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc2_mx53_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc3_ipg_clk,
-};
-
-DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
- clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc4_mx53_clk = {
- .id = 3,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc4_mx53_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc4_ipg_clk,
-};
-
-static struct clk sata_clk = {
- .parent = &ipg_clk,
- .enable = _clk_max_enable,
- .enable_reg = MXC_CCM_CCGR4,
- .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
- .disable = _clk_max_disable,
-};
-
-static struct clk ahci_phy_clk = {
- .parent = &usb_phy1_clk,
-};
-
-static struct clk ahci_dma_clk = {
- .parent = &ahb_clk,
-};
-
-DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
-
-/* IPU */
-DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
-
-DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
- &ddr_clk, NULL);
-
-DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &pll3_sw_clk, NULL);
-DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &pll3_sw_clk, NULL);
-
-/* PATA */
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup mx51_lookups[] = {
- /* i.mx51 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- /* i.mx51 has the i.mx27 type fec */
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
- _REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
- _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- /* i.mx51 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
- _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
- _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
- _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
- _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
- /* i.mx51 has the i.mx35 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
- _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
- _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
- _REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
- _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
- _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
- _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
- _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-};
-
-static struct clk_lookup mx53_lookups[] = {
- /* i.mx53 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- /* i.mx53 has the i.mx25 type fec */
- _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
- /* i.mx53 has the i.mx51 type ecspi */
- _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
- _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
- /* i.mx53 has the i.mx25 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
- _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
- /* i.mx53 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
-};
-
-static void clk_tree_init(void)
-{
- u32 reg;
-
- ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
-
- /*
- * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
- * 8MHz, its derived from lp_apm.
- *
- * FIXME: Verify if true for all boards
- */
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
- reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
- reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
- reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
- __raw_writel(reg, MXC_CCM_CBCDR);
-}
-
-int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2)
-{
- int i;
-
- external_low_reference = ckil;
- external_high_reference = ckih1;
- ckih2_reference = ckih2;
- oscillator_reference = osc;
-
- for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
- clkdev_add(&mx51_lookups[i]);
-
- clk_tree_init();
-
- clk_enable(&cpu_clk);
- clk_enable(&main_bus_clk);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX51", mx51_revision());
- clk_disable(&iim_clk);
-
- /* move usb_phy_clk to 24MHz */
- clk_set_parent(&usb_phy1_clk, &osc_clk);
-
- /* set the usboh3_clk parent to pll2_sw_clk */
- clk_set_parent(&usboh3_clk, &pll2_sw_clk);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
- clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
-
- /* set SDHC root clock as 166.25MHZ*/
- clk_set_rate(&esdhc1_clk, 166250000);
- clk_set_rate(&esdhc2_clk, 166250000);
-
- /* System timer */
- mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
- return 0;
-}
-
-int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2)
-{
- int i;
-
- external_low_reference = ckil;
- external_high_reference = ckih1;
- ckih2_reference = ckih2;
- oscillator_reference = osc;
-
- for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
- clkdev_add(&mx53_lookups[i]);
-
- clk_tree_init();
-
- clk_set_parent(&uart_root_clk, &pll3_sw_clk);
- clk_enable(&cpu_clk);
- clk_enable(&main_bus_clk);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX53", mx53_revision());
- clk_disable(&iim_clk);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
- clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
-
- /* set SDHC root clock as 200MHZ*/
- clk_set_rate(&esdhc1_clk, 200000000);
- clk_set_rate(&esdhc3_mx53_clk, 200000000);
-
- /* System timer */
- mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
- return 0;
-}
-
-#ifdef CONFIG_OF
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
- unsigned long *ckih1, unsigned long *ckih2)
-{
- struct device_node *np;
-
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(np, "fsl,imx-ckil"))
- *ckil = rate;
- else if (of_device_is_compatible(np, "fsl,imx-osc"))
- *osc = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
- *ckih1 = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
- *ckih2 = rate;
- }
-}
-
-int __init mx51_clocks_init_dt(void)
-{
- unsigned long ckil, osc, ckih1, ckih2;
-
- clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
- return mx51_clocks_init(ckil, osc, ckih1, ckih2);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
- unsigned long ckil, osc, ckih1, ckih2;
-
- clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
- return mx53_clocks_init(ckil, osc, ckih1, ckih2);
-}
-#endif
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index aa15c51..8eb15a2 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -62,11 +62,8 @@
* Dependent on link order - so the assumption is that vfp_init is called
* before us.
*/
-static int __init mx51_neon_fixup(void)
+int __init mx51_neon_fixup(void)
{
- if (!cpu_is_mx51())
- return 0;
-
if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
(elf_hwcap & HWCAP_NEON)) {
elf_hwcap &= ~HWCAP_NEON;
@@ -75,7 +72,6 @@
return 0;
}
-late_initcall(mx51_neon_fixup);
#endif
static int get_mx53_srev(void)
diff --git a/arch/arm/mach-imx/crmregs-imx3.h b/arch/arm/mach-imx/crmregs-imx3.h
index 5314127..a1dfde5 100644
--- a/arch/arm/mach-imx/crmregs-imx3.h
+++ b/arch/arm/mach-imx/crmregs-imx3.h
@@ -24,48 +24,47 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
-#define MXC_CCM_BASE (cpu_is_mx31() ? \
-MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR))
+extern void __iomem *mx3_ccm_base;
/* Register addresses */
-#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
-#define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04)
-#define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08)
-#define MX35_CCM_PDR2 (MXC_CCM_BASE + 0x0C)
-#define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C)
-#define MX35_CCM_PDR3 (MXC_CCM_BASE + 0x10)
-#define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10)
-#define MX35_CCM_PDR4 (MXC_CCM_BASE + 0x14)
-#define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14)
-#define MX35_CCM_RCSR (MXC_CCM_BASE + 0x18)
-#define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18)
-#define MX35_CCM_MPCTL (MXC_CCM_BASE + 0x1C)
-#define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C)
-#define MX35_CCM_PPCTL (MXC_CCM_BASE + 0x20)
-#define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20)
-#define MX35_CCM_ACMR (MXC_CCM_BASE + 0x24)
-#define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24)
-#define MX35_CCM_COSR (MXC_CCM_BASE + 0x28)
-#define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28)
-#define MX35_CCM_CGR0 (MXC_CCM_BASE + 0x2C)
-#define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C)
-#define MX35_CCM_CGR1 (MXC_CCM_BASE + 0x30)
-#define MXC_CCM_LDC (MXC_CCM_BASE + 0x30)
-#define MX35_CCM_CGR2 (MXC_CCM_BASE + 0x34)
-#define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34)
-#define MX35_CCM_CGR3 (MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C)
-#define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40)
-#define MXC_CCM_LTR0 (MXC_CCM_BASE + 0x44)
-#define MXC_CCM_LTR1 (MXC_CCM_BASE + 0x48)
-#define MXC_CCM_LTR2 (MXC_CCM_BASE + 0x4C)
-#define MXC_CCM_LTR3 (MXC_CCM_BASE + 0x50)
-#define MXC_CCM_LTBR0 (MXC_CCM_BASE + 0x54)
-#define MXC_CCM_LTBR1 (MXC_CCM_BASE + 0x58)
-#define MXC_CCM_PMCR0 (MXC_CCM_BASE + 0x5C)
-#define MXC_CCM_PMCR1 (MXC_CCM_BASE + 0x60)
-#define MXC_CCM_PDR2 (MXC_CCM_BASE + 0x64)
+#define MXC_CCM_CCMR 0x00
+#define MXC_CCM_PDR0 0x04
+#define MXC_CCM_PDR1 0x08
+#define MX35_CCM_PDR2 0x0C
+#define MXC_CCM_RCSR 0x0C
+#define MX35_CCM_PDR3 0x10
+#define MXC_CCM_MPCTL 0x10
+#define MX35_CCM_PDR4 0x14
+#define MXC_CCM_UPCTL 0x14
+#define MX35_CCM_RCSR 0x18
+#define MXC_CCM_SRPCTL 0x18
+#define MX35_CCM_MPCTL 0x1C
+#define MXC_CCM_COSR 0x1C
+#define MX35_CCM_PPCTL 0x20
+#define MXC_CCM_CGR0 0x20
+#define MX35_CCM_ACMR 0x24
+#define MXC_CCM_CGR1 0x24
+#define MX35_CCM_COSR 0x28
+#define MXC_CCM_CGR2 0x28
+#define MX35_CCM_CGR0 0x2C
+#define MXC_CCM_WIMR 0x2C
+#define MX35_CCM_CGR1 0x30
+#define MXC_CCM_LDC 0x30
+#define MX35_CCM_CGR2 0x34
+#define MXC_CCM_DCVR0 0x34
+#define MX35_CCM_CGR3 0x38
+#define MXC_CCM_DCVR1 0x38
+#define MXC_CCM_DCVR2 0x3C
+#define MXC_CCM_DCVR3 0x40
+#define MXC_CCM_LTR0 0x44
+#define MXC_CCM_LTR1 0x48
+#define MXC_CCM_LTR2 0x4C
+#define MXC_CCM_LTR3 0x50
+#define MXC_CCM_LTBR0 0x54
+#define MXC_CCM_LTBR1 0x58
+#define MXC_CCM_PMCR0 0x5C
+#define MXC_CCM_PMCR1 0x60
+#define MXC_CCM_PDR2 0x64
/* Register bit definitions */
#define MXC_CCM_CCMR_WBEN (1 << 27)
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5f577fb..18e78db 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -118,6 +118,7 @@
.handle_irq = imx51_handle_irq,
.timer = &imx51_timer,
.init_machine = imx51_dt_init,
+ .init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 574eca4..eb04b62 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -10,6 +10,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
@@ -81,6 +84,19 @@
{ /* sentinel */ }
};
+static void __init imx53_qsb_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys(NULL, "ssi_ext1");
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clk ssi_ext1\n");
+ return;
+ }
+
+ clk_register_clkdev(clk, NULL, "0-000a");
+}
+
static void __init imx53_dt_init(void)
{
struct device_node *node;
@@ -99,6 +115,9 @@
of_node_put(node);
}
+ if (of_machine_is_compatible("fsl,imx53-qsb"))
+ imx53_qsb_init();
+
of_platform_populate(NULL, of_default_bus_match_table,
imx53_auxdata_lookup, NULL);
}
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index 0213f8d..c40a34c 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,6 +17,12 @@
#include <mach/hardware.h>
static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART2
+ .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
+ .length = MX6Q_UART2_SIZE,
+ .type = MT_DEVICE,
+#endif
#ifdef CONFIG_DEBUG_IMX6Q_UART4
.virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
.pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index ce341a6..ac50f16 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -369,5 +369,6 @@
.handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51sd_init,
+ .init_late = imx51_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 3df360a..b47e98b 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -64,18 +66,53 @@
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
- /* min rx data delay */
- phy_write(phydev, 0x0b, 0x8105);
- phy_write(phydev, 0x0c, 0x0000);
+ if (IS_ENABLED(CONFIG_PHYLIB)) {
+ /* min rx data delay */
+ phy_write(phydev, 0x0b, 0x8105);
+ phy_write(phydev, 0x0c, 0x0000);
- /* max rx/tx clock delay, min rx/tx control delay */
- phy_write(phydev, 0x0b, 0x8104);
- phy_write(phydev, 0x0c, 0xf0f0);
- phy_write(phydev, 0x0b, 0x104);
+ /* max rx/tx clock delay, min rx/tx control delay */
+ phy_write(phydev, 0x0b, 0x8104);
+ phy_write(phydev, 0x0c, 0xf0f0);
+ phy_write(phydev, 0x0b, 0x104);
+ }
return 0;
}
+static void __init imx6q_sabrelite_cko1_setup(void)
+{
+ struct clk *cko1_sel, *ahb, *cko1;
+ unsigned long rate;
+
+ cko1_sel = clk_get_sys(NULL, "cko1_sel");
+ ahb = clk_get_sys(NULL, "ahb");
+ cko1 = clk_get_sys(NULL, "cko1");
+ if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+ pr_err("cko1 setup failed!\n");
+ goto put_clk;
+ }
+ clk_set_parent(cko1_sel, ahb);
+ rate = clk_round_rate(cko1, 16000000);
+ clk_set_rate(cko1, rate);
+ clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+ if (!IS_ERR(cko1_sel))
+ clk_put(cko1_sel);
+ if (!IS_ERR(ahb))
+ clk_put(ahb);
+ if (!IS_ERR(cko1))
+ clk_put(cko1);
+}
+
+static void __init imx6q_sabrelite_init(void)
+{
+ if (IS_ENABLED(CONFIG_PHYLIB))
+ phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+ ksz9021rn_phy_fixup);
+ imx6q_sabrelite_cko1_setup();
+}
+
static void __init imx6q_init_machine(void)
{
/*
@@ -85,8 +122,7 @@
pinctrl_provide_dummies();
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
- phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
- ksz9021rn_phy_fixup);
+ imx6q_sabrelite_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -139,6 +175,7 @@
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
+ "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 83eab41..3c5b163 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -175,5 +175,6 @@
.handle_irq = imx51_handle_irq,
.timer = &mx51_3ds_timer,
.init_machine = mx51_3ds_init,
+ .init_late = imx51_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index e4b822e..dde3970 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -163,6 +163,12 @@
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
MX51_PAD_CSPI1_SS0__GPIO4_24,
MX51_PAD_CSPI1_SS1__GPIO4_25,
+
+ /* Audio */
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
};
/* Serial ports */
@@ -426,5 +432,6 @@
.handle_irq = imx51_handle_irq,
.timer = &mx51_babbage_timer,
.init_machine = mx51_babbage_init,
+ .init_late = imx51_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
index 86e96ef..8d09c01 100644
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ b/arch/arm/mach-imx/mach-mx51_efikamx.c
@@ -207,29 +207,32 @@
static int __init mx51_efikamx_power_init(void)
{
- if (machine_is_mx51_efikamx()) {
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKAMX_POWEROFF, "poweroff");
- pm_power_off = mx51_efikamx_power_off;
-
- /* enable coincell charger. maybe need a small power driver ? */
- coincell = regulator_get(NULL, "coincell");
- if (!IS_ERR(coincell)) {
- regulator_set_voltage(coincell, 3000000, 3000000);
- regulator_enable(coincell);
- }
-
- regulator_has_full_constraints();
+ pwgt1 = regulator_get(NULL, "pwgt1");
+ pwgt2 = regulator_get(NULL, "pwgt2");
+ if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+ regulator_enable(pwgt1);
+ regulator_enable(pwgt2);
}
+ gpio_request(EFIKAMX_POWEROFF, "poweroff");
+ pm_power_off = mx51_efikamx_power_off;
+
+ /* enable coincell charger. maybe need a small power driver ? */
+ coincell = regulator_get(NULL, "coincell");
+ if (!IS_ERR(coincell)) {
+ regulator_set_voltage(coincell, 3000000, 3000000);
+ regulator_enable(coincell);
+ }
+
+ regulator_has_full_constraints();
return 0;
}
-late_initcall(mx51_efikamx_power_init);
+
+static void __init mx51_efikamx_init_late(void)
+{
+ imx51_init_late();
+ mx51_efikamx_power_init();
+}
static void __init mx51_efikamx_init(void)
{
@@ -292,5 +295,6 @@
.handle_irq = imx51_handle_irq,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
+ .init_late = mx51_efikamx_init_late,
.restart = mx51_efikamx_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
index 88f837a..fdbd181 100644
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ b/arch/arm/mach-imx/mach-mx51_efikasb.c
@@ -211,22 +211,25 @@
static int __init mx51_efikasb_power_init(void)
{
- if (machine_is_mx51_efikasb()) {
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKASB_POWEROFF, "poweroff");
- pm_power_off = mx51_efikasb_power_off;
-
- regulator_has_full_constraints();
+ pwgt1 = regulator_get(NULL, "pwgt1");
+ pwgt2 = regulator_get(NULL, "pwgt2");
+ if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+ regulator_enable(pwgt1);
+ regulator_enable(pwgt2);
}
+ gpio_request(EFIKASB_POWEROFF, "poweroff");
+ pm_power_off = mx51_efikasb_power_off;
+
+ regulator_has_full_constraints();
return 0;
}
-late_initcall(mx51_efikasb_power_init);
+
+static void __init mx51_efikasb_init_late(void)
+{
+ imx51_init_late();
+ mx51_efikasb_power_init();
+}
/* 01 R1.3 board
10 R2.0 board */
@@ -287,6 +290,7 @@
.init_irq = mx51_init_irq,
.handle_irq = imx51_handle_irq,
.init_machine = efikasb_board_init,
+ .init_late = mx51_efikasb_init_late,
.timer = &mx51_efikasb_timer,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 10c9795..0a40004 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -694,6 +694,11 @@
MX3_CAMERA_BUF_SIZE);
}
+static void __init pcm037_init_late(void)
+{
+ pcm037_eet_init_devices();
+}
+
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
.atag_offset = 0x100,
@@ -704,5 +709,6 @@
.handle_irq = imx31_handle_irq,
.timer = &pcm037_timer,
.init_machine = pcm037_init,
+ .init_late = pcm037_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 1b7606b..11ffa81 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -160,9 +160,9 @@
.rep = 0, /* No auto-repeat */
};
-static int __init eet_init_devices(void)
+int __init pcm037_eet_init_devices(void)
{
- if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+ if (pcm037_variant() != PCM037_EET)
return 0;
mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
@@ -176,4 +176,3 @@
return 0;
}
-late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9128d15..967ed5b 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -32,6 +32,10 @@
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
+#include "crmregs-imx3.h"
+
+void __iomem *mx3_ccm_base;
+
static void imx3_idle(void)
{
unsigned long reg = 0;
@@ -138,6 +142,7 @@
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx3_idle;
+ mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
}
void __init mx31_init_irq(void)
@@ -211,6 +216,7 @@
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
arm_pm_idle = imx3_idle;
arch_ioremap_caller = imx3_ioremap_caller;
+ mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
}
void __init mx35_init_irq(void)
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index ba91e6b..feeee17 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -33,6 +33,7 @@
gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
if (IS_ERR(gpc_dvfs_clk))
return;
+ clk_prepare(gpc_dvfs_clk);
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
@@ -236,3 +237,8 @@
platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
ARRAY_SIZE(imx53_audmux_res));
}
+
+void __init imx51_init_late(void)
+{
+ mx51_neon_fixup();
+}
diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h
index d692972..7d16769 100644
--- a/arch/arm/mach-imx/pcm037.h
+++ b/arch/arm/mach-imx/pcm037.h
@@ -8,4 +8,10 @@
extern enum pcm037_board_variant pcm037_variant(void);
+#ifdef CONFIG_MACH_PCM037_EET
+int pcm037_eet_init_devices(void);
+#else
+static inline int pcm037_eet_init_devices(void) { return 0; }
+#endif
+
#endif
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
index b375243..822103b 100644
--- a/arch/arm/mach-imx/pm-imx3.c
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -21,14 +21,14 @@
*/
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
{
- int reg = __raw_readl(MXC_CCM_CCMR);
+ int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR);
reg &= ~MXC_CCM_CCMR_LPM_MASK;
switch (mode) {
case MX3_WAIT:
if (cpu_is_mx35())
reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
- __raw_writel(reg, MXC_CCM_CCMR);
+ __raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
break;
default:
pr_err("Unknown cpu power mode: %d\n", mode);
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 9854539..55e357a 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -27,7 +27,6 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 10d1969..edc3f8a 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -43,6 +43,9 @@
kirkwood_l2_init();
#endif
+ /* Setup root of clk tree */
+ kirkwood_clk_init();
+
/* internal devices that every board has */
kirkwood_wdt_init();
kirkwood_xor0_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 3ad0373..25fb3fd 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,7 +15,8 @@
#include <linux/ata_platform.h>
#include <linux/mtd/nand.h>
#include <linux/dma-mapping.h>
-#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/timex.h>
@@ -32,6 +33,7 @@
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
+#include <plat/mv_xor.h>
#include "common.h"
/*****************************************************************************
@@ -61,20 +63,188 @@
iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
}
-/*
- * Default clock control bits. Any bit _not_ set in this variable
- * will be cleared from the hardware after platform devices have been
- * registered. Some reserved bits must be set to 1.
- */
-unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static void disable_sata0(void)
+{
+ /* Disable PLL and IVREF */
+ writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+}
+
+static void disable_sata1(void)
+{
+ /* Disable PLL and IVREF */
+ writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+}
+
+static void disable_pcie0(void)
+{
+ writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+ while (1)
+ if (readl(PCIE_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+}
+
+static void disable_pcie1(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6282_DEV_ID) {
+ writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+ while (1)
+ if (readl(PCIE1_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+ }
+}
+
+/* An extended version of the gated clk. This calls fn() before
+ * disabling the clock. We use this to turn off PHYs etc. */
+struct clk_gate_fn {
+ struct clk_gate gate;
+ void (*fn)(void);
+};
+
+#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static void clk_gate_fn_disable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+
+ if (gate_fn->fn)
+ gate_fn->fn();
+
+ clk_gate_ops.disable(hw);
+}
+
+static struct clk_ops clk_gate_fn_ops;
+
+static struct clk __init *clk_register_gate_fn(struct device *dev,
+ const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock,
+ void (*fn)(void))
+{
+ struct clk_gate_fn *gate_fn;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
+ if (!gate_fn) {
+ pr_err("%s: could not allocate gated clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clk_gate_fn_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_gate assignments */
+ gate_fn->gate.reg = reg;
+ gate_fn->gate.bit_idx = bit_idx;
+ gate_fn->gate.flags = clk_gate_flags;
+ gate_fn->gate.lock = lock;
+ gate_fn->gate.hw.init = &init;
+
+ /* ops is the gate ops, but with our disable function */
+ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
+ clk_gate_fn_ops = clk_gate_ops;
+ clk_gate_fn_ops.disable = clk_gate_fn_disable;
+ }
+
+ clk = clk_register(dev, &gate_fn->gate.hw);
+
+ if (IS_ERR(clk))
+ kfree(gate_fn);
+
+ return clk;
+}
+
+static DEFINE_SPINLOCK(gating_lock);
+static struct clk *tclk;
+
+static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
+{
+ return clk_register_gate(NULL, name, "tclk", 0,
+ (void __iomem *)CLOCK_GATING_CTRL,
+ bit_idx, 0, &gating_lock);
+}
+
+static struct clk __init *kirkwood_register_gate_fn(const char *name,
+ u8 bit_idx,
+ void (*fn)(void))
+{
+ return clk_register_gate_fn(NULL, name, "tclk", 0,
+ (void __iomem *)CLOCK_GATING_CTRL,
+ bit_idx, 0, &gating_lock, fn);
+}
+
+void __init kirkwood_clk_init(void)
+{
+ struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+ struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
+
+ tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
+ CLK_IS_ROOT, kirkwood_tclk);
+
+ runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT);
+ ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0);
+ ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
+ sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0,
+ disable_sata0);
+ sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1,
+ disable_sata1);
+ usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
+ sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO);
+ crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
+ xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
+ xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
+ pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0,
+ disable_pcie0);
+ pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1,
+ disable_pcie1);
+ audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO);
+ kirkwood_register_gate("tdm", CGC_BIT_TDM);
+ kirkwood_register_gate("tsu", CGC_BIT_TSU);
+
+ /* clkdev entries, mapping clks to devices */
+ orion_clkdev_add(NULL, "orion_spi.0", runit);
+ orion_clkdev_add(NULL, "orion_spi.1", runit);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
+ orion_clkdev_add(NULL, "orion_wdt", tclk);
+ orion_clkdev_add("0", "sata_mv.0", sata0);
+ orion_clkdev_add("1", "sata_mv.0", sata1);
+ orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+ orion_clkdev_add(NULL, "orion_nand", runit);
+ orion_clkdev_add(NULL, "mvsdio", sdio);
+ orion_clkdev_add(NULL, "mv_crypto", crypto);
+ orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
+ orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
+ orion_clkdev_add("0", "pcie", pex0);
+ orion_clkdev_add("1", "pcie", pex1);
+ orion_clkdev_add(NULL, "kirkwood-i2s", audio);
+}
/*****************************************************************************
* EHCI0
****************************************************************************/
void __init kirkwood_ehci_init(void)
{
- kirkwood_clk_ctrl |= CGC_USB0;
orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
@@ -84,11 +254,9 @@
****************************************************************************/
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
- kirkwood_clk_ctrl |= CGC_GE0;
-
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
- IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
+ IRQ_KIRKWOOD_GE00_ERR);
}
@@ -97,12 +265,9 @@
****************************************************************************/
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
-
- kirkwood_clk_ctrl |= CGC_GE1;
-
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
- IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
+ IRQ_KIRKWOOD_GE01_ERR);
}
@@ -144,7 +309,6 @@
void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
int chip_delay)
{
- kirkwood_clk_ctrl |= CGC_RUNIT;
kirkwood_nand_data.parts = parts;
kirkwood_nand_data.nr_parts = nr_parts;
kirkwood_nand_data.chip_delay = chip_delay;
@@ -154,7 +318,6 @@
void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
int (*dev_ready)(struct mtd_info *))
{
- kirkwood_clk_ctrl |= CGC_RUNIT;
kirkwood_nand_data.parts = parts;
kirkwood_nand_data.nr_parts = nr_parts;
kirkwood_nand_data.dev_ready = dev_ready;
@@ -175,10 +338,6 @@
****************************************************************************/
void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
{
- kirkwood_clk_ctrl |= CGC_SATA0;
- if (sata_data->n_ports > 1)
- kirkwood_clk_ctrl |= CGC_SATA1;
-
orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
}
@@ -221,7 +380,6 @@
mvsdio_data->clock = 100000000;
else
mvsdio_data->clock = 200000000;
- kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
}
@@ -232,8 +390,7 @@
****************************************************************************/
void __init kirkwood_spi_init()
{
- kirkwood_clk_ctrl |= CGC_RUNIT;
- orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk);
+ orion_spi_init(SPI_PHYS_BASE);
}
@@ -253,7 +410,7 @@
void __init kirkwood_uart0_init(void)
{
orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_KIRKWOOD_UART_0, kirkwood_tclk);
+ IRQ_KIRKWOOD_UART_0, tclk);
}
@@ -263,7 +420,7 @@
void __init kirkwood_uart1_init(void)
{
orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_KIRKWOOD_UART_1, kirkwood_tclk);
+ IRQ_KIRKWOOD_UART_1, tclk);
}
/*****************************************************************************
@@ -271,7 +428,6 @@
****************************************************************************/
void __init kirkwood_crypto_init(void)
{
- kirkwood_clk_ctrl |= CGC_CRYPTO;
orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
}
@@ -282,8 +438,6 @@
****************************************************************************/
void __init kirkwood_xor0_init(void)
{
- kirkwood_clk_ctrl |= CGC_XOR0;
-
orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
}
@@ -294,8 +448,6 @@
****************************************************************************/
void __init kirkwood_xor1_init(void)
{
- kirkwood_clk_ctrl |= CGC_XOR1;
-
orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
}
@@ -306,7 +458,7 @@
****************************************************************************/
void __init kirkwood_wdt_init(void)
{
- orion_wdt_init(kirkwood_tclk);
+ orion_wdt_init();
}
@@ -382,7 +534,6 @@
void __init kirkwood_audio_init(void)
{
- kirkwood_clk_ctrl |= CGC_AUDIO;
platform_device_register(&kirkwood_i2s_device);
platform_device_register(&kirkwood_pcm_device);
}
@@ -466,6 +617,9 @@
kirkwood_l2_init();
#endif
+ /* Setup root of clk tree */
+ kirkwood_clk_init();
+
/* internal devices that every board has */
kirkwood_rtc_init();
kirkwood_wdt_init();
@@ -478,72 +632,6 @@
#endif
}
-static int __init kirkwood_clock_gate(void)
-{
- unsigned int curr = readl(CLOCK_GATING_CTRL);
- u32 dev, rev;
-
-#ifdef CONFIG_OF
- struct device_node *np;
-#endif
- kirkwood_pcie_id(&dev, &rev);
- printk(KERN_DEBUG "Gating clock of unused units\n");
- printk(KERN_DEBUG "before: 0x%08x\n", curr);
-
- /* Make sure those units are accessible */
- writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
-
-#ifdef CONFIG_OF
- np = of_find_compatible_node(NULL, NULL, "mrvl,orion-nand");
- if (np && of_device_is_available(np)) {
- kirkwood_clk_ctrl |= CGC_RUNIT;
- of_node_put(np);
- }
-#endif
-
- /* For SATA: first shutdown the phy */
- if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
- /* Disable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
- }
- if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
- /* Disable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
- }
-
- /* For PCIe: first shutdown the phy */
- if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
- writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
- while (1)
- if (readl(PCIE_STATUS) & 0x1)
- break;
- writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
- }
-
- /* For PCIe 1: first shutdown the phy */
- if (dev == MV88F6282_DEV_ID) {
- if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
- writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
- while (1)
- if (readl(PCIE1_STATUS) & 0x1)
- break;
- writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
- }
- } else /* keep this bit set for devices that don't have PCIe1 */
- kirkwood_clk_ctrl |= CGC_PEX1;
-
- /* Now gate clock the required units */
- writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
- printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
-
- return 0;
-}
-late_initcall(kirkwood_clock_gate);
-
void kirkwood_restart(char mode, const char *cmd)
{
/*
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index a34c41a..9248fa2 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
+void kirkwood_clk_init(void);
/* board init functions for boards not fully converted to fdt */
#ifdef CONFIG_MACH_DREAMPLUG_DT
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 957bd79..3eee37a 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -43,6 +43,22 @@
#define L2_WRITETHROUGH 0x00000010
#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_BIT_GE0 (0)
+#define CGC_BIT_PEX0 (2)
+#define CGC_BIT_USB0 (3)
+#define CGC_BIT_SDIO (4)
+#define CGC_BIT_TSU (5)
+#define CGC_BIT_DUNIT (6)
+#define CGC_BIT_RUNIT (7)
+#define CGC_BIT_XOR0 (8)
+#define CGC_BIT_AUDIO (9)
+#define CGC_BIT_SATA0 (14)
+#define CGC_BIT_SATA1 (15)
+#define CGC_BIT_XOR1 (16)
+#define CGC_BIT_CRYPTO (17)
+#define CGC_BIT_PEX1 (18)
+#define CGC_BIT_GE1 (19)
+#define CGC_BIT_TDM (20)
#define CGC_GE0 (1 << 0)
#define CGC_PEX0 (1 << 2)
#define CGC_USB0 (1 << 3)
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 85f6169..6d8364a 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -23,7 +23,6 @@
#include <linux/gpio_keys.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index de37317..6e8b2ef 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
@@ -19,6 +20,23 @@
#include <plat/addr-map.h>
#include "common.h"
+static void kirkwood_enable_pcie_clk(const char *port)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys("pcie", port);
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "PCIE clock %s missing\n", port);
+ return;
+ }
+ clk_prepare_enable(clk);
+ clk_put(clk);
+}
+
+/* This function is called very early in the boot when probing the
+ hardware to determine what we actually are, and what rate tclk is
+ ticking at. Hence calling kirkwood_enable_pcie_clk() is not
+ possible since the clk tree has not been created yet. */
void kirkwood_enable_pcie(void)
{
u32 curr = readl(CLOCK_GATING_CTRL);
@@ -26,7 +44,7 @@
writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
}
-void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+void kirkwood_pcie_id(u32 *dev, u32 *rev)
{
kirkwood_enable_pcie();
*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
@@ -159,7 +177,6 @@
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
- extern unsigned int kirkwood_clk_ctrl;
struct pcie_port *pp;
int index;
@@ -178,11 +195,11 @@
switch (index) {
case 0:
- kirkwood_clk_ctrl |= CGC_PEX0;
+ kirkwood_enable_pcie_clk("0");
pcie0_ioresources_init(pp);
break;
case 1:
- kirkwood_clk_ctrl |= CGC_PEX1;
+ kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
break;
default:
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index fd2c9c8..f742a66 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -16,7 +16,6 @@
#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index f9d2a11..bad738e 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -16,7 +16,6 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 24294b2..8943ede 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -4,7 +4,6 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/serial_reg.h>
#include <mach/kirkwood.h>
#include "common.h"
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 26aac36..4fa3e99 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -94,6 +94,11 @@
msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
}
+static void __init halibut_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
.atag_offset = 0x100,
.fixup = halibut_fixup,
@@ -101,5 +106,6 @@
.init_early = halibut_init_early,
.init_irq = halibut_init_irq,
.init_machine = halibut_init,
+ .init_late = halibut_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 5a4882f..cf1f89a 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -71,6 +71,11 @@
msm_clock_init();
}
+static void __init mahimahi_init_late(void)
+{
+ smd_debugfs_init();
+}
+
extern struct sys_timer msm_timer;
MACHINE_START(MAHIMAHI, "mahimahi")
@@ -79,5 +84,6 @@
.map_io = mahimahi_map_io,
.init_irq = msm_init_irq,
.init_machine = mahimahi_init,
+ .init_late = mahimahi_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index 6d84ee7..451ab1d 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -128,11 +128,17 @@
#endif
}
+static void __init msm7x2x_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
.atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
+ .init_late = msm7x2x_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -141,6 +147,7 @@
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
+ .init_late = msm7x2x_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -149,6 +156,7 @@
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
+ .init_late = msm7x2x_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -157,5 +165,6 @@
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
+ .init_late = msm7x2x_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 75b3cfc..a500137 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -119,6 +119,11 @@
msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
}
+static void __init msm7x30_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
@@ -126,6 +131,7 @@
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
+ .init_late = msm7x30_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -136,6 +142,7 @@
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
+ .init_late = msm7x30_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -146,5 +153,6 @@
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
+ .init_late = msm7x30_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index ed35981..65f4a1d 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -93,6 +93,11 @@
platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
}
+static void __init msm8960_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
.fixup = msm8960_fixup,
.reserve = msm8960_reserve,
@@ -101,6 +106,7 @@
.timer = &msm_timer,
.handle_irq = gic_handle_irq,
.init_machine = msm8960_sim_init,
+ .init_late = msm8960_init_late,
MACHINE_END
MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
@@ -111,5 +117,6 @@
.timer = &msm_timer,
.handle_irq = gic_handle_irq,
.init_machine = msm8960_rumi3_init,
+ .init_late = msm8960_init_late,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index fb3496a..e37a724 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -81,6 +81,11 @@
{
}
+static void __init msm8x60_init_late(void)
+{
+ smd_debugfs_init();
+}
+
#ifdef CONFIG_OF
static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
{}
@@ -111,6 +116,7 @@
.init_irq = msm8x60_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
+ .init_late = msm8x60_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -121,6 +127,7 @@
.init_irq = msm8x60_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
+ .init_late = msm8x60_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -131,6 +138,7 @@
.init_irq = msm8x60_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
+ .init_late = msm8x60_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -141,6 +149,7 @@
.init_irq = msm8x60_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
+ .init_late = msm8x60_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -150,6 +159,7 @@
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_dt_init,
+ .init_late = msm8x60_init_late,
.timer = &msm_timer,
.dt_compat = msm8x60_fluid_match,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index fbaa4ed..c8fe0ed 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -190,11 +190,17 @@
qsd8x50_init_mmc();
}
+static void __init qsd8x50_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
+ .init_late = qsd8x50_init_late,
.timer = &msm_timer,
MACHINE_END
@@ -203,5 +209,6 @@
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
+ .init_late = qsd8x50_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 4a8ea0d..2e569ab 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -101,6 +101,11 @@
msm_clock_init();
}
+static void __init sapphire_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
.atag_offset = 0x100,
@@ -108,5 +113,6 @@
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
.init_machine = sapphire_init,
+ .init_late = sapphire_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index d4060a3..bbe13f1 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -98,6 +98,11 @@
msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
}
+static void __init trout_init_late(void)
+{
+ smd_debugfs_init();
+}
+
MACHINE_START(TROUT, "HTC Dream")
.atag_offset = 0x100,
.fixup = trout_fixup,
@@ -105,5 +110,6 @@
.init_early = trout_init_early,
.init_irq = trout_init_irq,
.init_machine = trout_init,
+ .init_late = trout_init_late,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 2ce8f1f..435f8ed 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -47,4 +47,10 @@
struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags);
+#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
+int smd_debugfs_init(void);
+#else
+static inline int smd_debugfs_init(void) { return 0; }
+#endif
+
#endif
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index c56df9e..8056b3e 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -216,7 +216,7 @@
debugfs_create_file(name, mode, dent, fill, &debug_ops);
}
-static int smd_debugfs_init(void)
+int __init smd_debugfs_init(void)
{
struct dentry *dent;
@@ -234,7 +234,6 @@
return 0;
}
-late_initcall(smd_debugfs_init);
#endif
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a5dcf766..b4c53b8 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/ata_platform.h>
+#include <linux/clk-provider.h>
#include <linux/ethtool.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -103,24 +104,24 @@
static int get_tclk(void)
{
- int tclk;
+ int tclk_freq;
/*
* TCLK tick rate is configured by DEV_A[2:0] strap pins.
*/
switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
case 1:
- tclk = 166666667;
+ tclk_freq = 166666667;
break;
case 3:
- tclk = 200000000;
+ tclk_freq = 200000000;
break;
default:
panic("unknown TCLK PLL setting: %.8x\n",
readl(SAMPLE_AT_RESET_HIGH));
}
- return tclk;
+ return tclk_freq;
}
@@ -166,6 +167,19 @@
/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+ tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+ get_tclk());
+
+ orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
* EHCI
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
@@ -199,7 +213,7 @@
{
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
- IRQ_MV78XX0_GE_ERR, get_tclk());
+ IRQ_MV78XX0_GE_ERR);
}
@@ -210,7 +224,7 @@
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
- NO_IRQ, get_tclk());
+ NO_IRQ);
}
@@ -234,7 +248,7 @@
orion_ge10_init(eth_data,
GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
- NO_IRQ, get_tclk());
+ NO_IRQ);
}
@@ -258,7 +272,7 @@
orion_ge11_init(eth_data,
GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
- NO_IRQ, get_tclk());
+ NO_IRQ);
}
/*****************************************************************************
@@ -285,7 +299,7 @@
void __init mv78xx0_uart0_init(void)
{
orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_MV78XX0_UART_0, get_tclk());
+ IRQ_MV78XX0_UART_0, tclk);
}
@@ -295,7 +309,7 @@
void __init mv78xx0_uart1_init(void)
{
orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_MV78XX0_UART_1, get_tclk());
+ IRQ_MV78XX0_UART_1, tclk);
}
@@ -305,7 +319,7 @@
void __init mv78xx0_uart2_init(void)
{
orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE,
- IRQ_MV78XX0_UART_2, get_tclk());
+ IRQ_MV78XX0_UART_2, tclk);
}
/*****************************************************************************
@@ -314,7 +328,7 @@
void __init mv78xx0_uart3_init(void)
{
orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE,
- IRQ_MV78XX0_UART_3, get_tclk());
+ IRQ_MV78XX0_UART_3, tclk);
}
/*****************************************************************************
@@ -378,25 +392,26 @@
int hclk;
int pclk;
int l2clk;
- int tclk;
core_index = mv78xx0_core_index();
hclk = get_hclk();
get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
- tclk = get_tclk();
printk(KERN_INFO "%s ", mv78xx0_id());
printk("core #%d, ", core_index);
printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
- printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+ printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
mv78xx0_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_l2_init(is_l2_writethrough());
#endif
+
+ /* Setup root of clk tree */
+ clk_init();
}
void mv78xx0_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 07d5383..91cf062 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -7,18 +7,28 @@
config SOC_IMX23
bool
+ select ARM_AMBA
select CPU_ARM926T
select HAVE_PWM
select PINCTRL_IMX23
config SOC_IMX28
bool
+ select ARM_AMBA
select CPU_ARM926T
select HAVE_PWM
select PINCTRL_IMX28
comment "MXS platforms:"
+config MACH_MXS_DT
+ bool "Support MXS platforms from device tree"
+ select SOC_IMX23
+ select SOC_IMX28
+ help
+ Include support for Freescale MXS platforms(i.MX23 and i.MX28)
+ using the device tree for discovery
+
config MACH_STMP378X_DEVB
bool "Support STMP378x_devb Platform"
select SOC_IMX23
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 908bf9a..e41590c 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,12 +1,10 @@
# Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
-
+obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
deleted file mode 100644
index e3ac52c..0000000
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "regs-clkctrl-mx23.h"
-
-#define CLKCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT 8
-
-static int _raw_clk_enable(struct clk *clk)
-{
- u32 reg;
-
- if (clk->enable_reg) {
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
- }
-
- return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
- u32 reg;
-
- if (clk->enable_reg) {
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
- }
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
- return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
- .get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll_clk_get_rate(struct clk *clk)
-{
- return 480000000;
-}
-
-static int pll_clk_enable(struct clk *clk)
-{
- __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
- BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
-
- /* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
- * and is incorrect (excessive). Per definition of the PLLCTRL0
- * POWER field, waiting at least 10us.
- */
- udelay(10);
-
- return 0;
-}
-
-static void pll_clk_disable(struct clk *clk)
-{
- __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
- BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
-}
-
-static struct clk pll_clk = {
- .get_rate = pll_clk_get_rate,
- .enable = pll_clk_enable,
- .disable = pll_clk_disable,
- .parent = &ref_xtal_clk,
-};
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- unsigned long parent_rate; \
- u32 reg, div; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \
- div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \
- parent_rate = clk_get_rate(clk->parent); \
- \
- return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \
- div, PARENT_RATE_SHIFT); \
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
-_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
-
-#define _DEFINE_CLOCK_REF(name, er, es) \
- static struct clk name = { \
- .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
- .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \
- .get_rate = name##_get_rate, \
- .enable = _raw_clk_enable, \
- .disable = _raw_clk_disable, \
- .parent = &pll_clk, \
- }
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
-_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
- /* ref_xtal_clk is implemented as the only parent */
- return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
- return clk->parent->get_rate(clk->parent) / 750;
-}
-
-#define _CLK_GET_RATE(name, rs) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, div; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- \
- if (clk->parent == &ref_xtal_clk) \
- div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \
- BP_CLKCTRL_##rs##_DIV_XTAL; \
- else \
- div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \
- BP_CLKCTRL_##rs##_DIV_##rs; \
- \
- if (!div) \
- return -EINVAL; \
- \
- return clk_get_rate(clk->parent) / div; \
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, div; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \
- \
- if (!div) \
- return -EINVAL; \
- \
- return clk_get_rate(clk->parent) / div; \
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp_clk, SSP)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, PIX)
-
-#define _CLK_GET_RATE_STUB(name) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- return clk_get_rate(clk->parent); \
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(audio_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-
-/*
- * clk_set_rate
- */
-static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, bm_busy, div_max, d, f, div, frac;
- unsigned long diff, parent_rate, calc_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->parent == &ref_xtal_clk) {
- div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
- bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
- div = DIV_ROUND_UP(parent_rate, rate);
- if (div == 0 || div > div_max)
- return -EINVAL;
- } else {
- div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
- bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
- rate >>= PARENT_RATE_SHIFT;
- parent_rate >>= PARENT_RATE_SHIFT;
- diff = parent_rate;
- div = frac = 1;
- for (d = 1; d <= div_max; d++) {
- f = parent_rate * 18 / d / rate;
- if ((parent_rate * 18 / d) % rate)
- f++;
- if (f < 18 || f > 35)
- continue;
-
- calc_rate = parent_rate * 18 / f / d;
- if (calc_rate > rate)
- continue;
-
- if (rate - calc_rate < diff) {
- frac = f;
- div = d;
- diff = rate - calc_rate;
- }
-
- if (diff == 0)
- break;
- }
-
- if (diff == parent_rate)
- return -EINVAL;
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
- reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
- reg |= frac;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
- }
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
- reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
- reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-
- mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy);
-
- return 0;
-}
-
-#define _CLK_SET_RATE(name, dr) \
-static int name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u32 reg, div_max, div; \
- unsigned long parent_rate; \
- \
- parent_rate = clk_get_rate(clk->parent); \
- div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
- \
- div = DIV_ROUND_UP(parent_rate, rate); \
- if (div == 0 || div > div_max) \
- return -EINVAL; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
- reg &= ~BM_CLKCTRL_##dr##_DIV; \
- reg |= div << BP_CLKCTRL_##dr##_DIV; \
- if (reg & (1 << clk->enable_shift)) { \
- pr_err("%s: clock is gated\n", __func__); \
- return -EINVAL; \
- } \
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
- \
- mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY); \
- return 0; \
-}
-
-_CLK_SET_RATE(xbus_clk, XBUS)
-_CLK_SET_RATE(ssp_clk, SSP)
-_CLK_SET_RATE(gpmi_clk, GPMI)
-_CLK_SET_RATE(lcdif_clk, PIX)
-
-#define _CLK_SET_RATE_STUB(name) \
-static int name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- return -EINVAL; \
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(audio_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit) \
-static int name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- if (parent != clk->parent) { \
- __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \
- clk->parent = parent; \
- } \
- \
- return 0; \
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp_clk, SSP)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(lcdif_clk, PIX)
-
-#define _CLK_SET_PARENT_STUB(name) \
-static int name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- if (parent != clk->parent) \
- return -EINVAL; \
- else \
- return 0; \
-}
-
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(audio_clk)
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
- .get_rate = cpu_clk_get_rate,
- .set_rate = cpu_clk_set_rate,
- .set_parent = cpu_clk_set_parent,
- .parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
- .get_rate = hbus_clk_get_rate,
- .parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
- .get_rate = xbus_clk_get_rate,
- .set_rate = xbus_clk_set_rate,
- .parent = &ref_xtal_clk,
-};
-
-static struct clk rtc_clk = {
- .get_rate = rtc_clk_get_rate,
- .parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb_clk = {
- .enable_reg = DIGCTRL_BASE_ADDR,
- .enable_shift = 2,
- .enable = _raw_clk_enable,
- .disable = _raw_clk_disable,
- .parent = &pll_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p) \
- static struct clk name = { \
- .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
- .enable_shift = BP_CLKCTRL_##er##_##es, \
- .get_rate = name##_get_rate, \
- .set_rate = name##_set_rate, \
- .set_parent = name##_set_parent, \
- .enable = _raw_clk_enable, \
- .disable = _raw_clk_disable, \
- .parent = p, \
- }
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- /* for amba bus driver */
- _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
- /* for amba-pl011 driver */
- _REGISTER_CLOCK("duart", NULL, uart_clk)
- _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
- _REGISTER_CLOCK("rtc", NULL, rtc_clk)
- _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
- _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
- _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
- _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
- _REGISTER_CLOCK(NULL, "usb", usb_clk)
- _REGISTER_CLOCK(NULL, "audio", audio_clk)
- _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
- _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
- _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
-};
-
-static int clk_misc_init(void)
-{
- u32 reg;
- int ret;
-
- /* Fix up parent per register setting */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
- cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
- &ref_xtal_clk : &ref_cpu_clk;
- emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
- &ref_xtal_clk : &ref_emi_clk;
- ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
- &ref_xtal_clk : &ref_io_clk;
- gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
- &ref_xtal_clk : &ref_io_clk;
- lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
- &ref_xtal_clk : &ref_pix_clk;
-
- /* Use int div over frac when both are available */
- __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
- __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
- __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
- reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
- reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
- reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
- reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-
- /*
- * Set safe hbus clock divider. A divider of 3 ensure that
- * the Vddd voltage required for the cpu clock is sufficiently
- * high for the hbus clock.
- */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
- reg &= BM_CLKCTRL_HBUS_DIV;
- reg |= 3 << BP_CLKCTRL_HBUS_DIV;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
- ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY);
-
- /* Gate off cpu clock in WFI for power saving */
- __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
- /*
- * 480 MHz seems too high to be ssp clock source directly,
- * so set frac to get a 288 MHz ref_io.
- */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
- reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
- reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-
- return ret;
-}
-
-int __init mx23_clocks_init(void)
-{
- clk_misc_init();
-
- /*
- * source ssp clock from ref_io than ref_xtal,
- * as ref_xtal only provides 24 MHz as maximum.
- */
- clk_set_parent(&ssp_clk, &ref_io_clk);
-
- clk_prepare_enable(&cpu_clk);
- clk_prepare_enable(&hbus_clk);
- clk_prepare_enable(&xbus_clk);
- clk_prepare_enable(&emi_clk);
- clk_prepare_enable(&uart_clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
-
- return 0;
-}
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
deleted file mode 100644
index cea29c9..0000000
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-#include <linux/spinlock.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/digctl.h>
-
-#include "regs-clkctrl-mx28.h"
-
-#define CLKCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT 8
-
-static struct clk pll2_clk;
-static struct clk cpu_clk;
-static struct clk emi_clk;
-static struct clk saif0_clk;
-static struct clk saif1_clk;
-static struct clk clk32k_clk;
-static DEFINE_SPINLOCK(clkmux_lock);
-
-/*
- * HW_SAIF_CLKMUX_SEL:
- * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
- * clock pins selected for SAIF1 input clocks.
- * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
- * SAIF0 clock inputs selected for SAIF1 input clocks.
- * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
- * clocks.
- * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
- * clocks.
- */
-int mxs_saif_clkmux_select(unsigned int clkmux)
-{
- if (clkmux > 0x3)
- return -EINVAL;
-
- spin_lock(&clkmux_lock);
- __raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
- DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
- __raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
- DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
- spin_unlock(&clkmux_lock);
-
- return 0;
-}
-
-static int _raw_clk_enable(struct clk *clk)
-{
- u32 reg;
-
- if (clk->enable_reg) {
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
- }
-
- return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
- u32 reg;
-
- if (clk->enable_reg) {
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
- }
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
- return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
- .get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll0_clk_get_rate(struct clk *clk)
-{
- return 480000000;
-}
-
-static unsigned long pll1_clk_get_rate(struct clk *clk)
-{
- return 480000000;
-}
-
-static unsigned long pll2_clk_get_rate(struct clk *clk)
-{
- return 50000000;
-}
-
-#define _CLK_ENABLE_PLL(name, r, g) \
-static int name##_enable(struct clk *clk) \
-{ \
- __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \
- udelay(10); \
- \
- if (clk == &pll2_clk) \
- __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \
- else \
- __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \
- \
- return 0; \
-}
-
-_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _CLK_DISABLE_PLL(name, r, g) \
-static void name##_disable(struct clk *clk) \
-{ \
- __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \
- \
- if (clk == &pll2_clk) \
- __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \
- else \
- __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \
- \
-}
-
-_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _DEFINE_CLOCK_PLL(name) \
- static struct clk name = { \
- .get_rate = name##_get_rate, \
- .enable = name##_enable, \
- .disable = name##_disable, \
- .parent = &ref_xtal_clk, \
- }
-
-_DEFINE_CLOCK_PLL(pll0_clk);
-_DEFINE_CLOCK_PLL(pll1_clk);
-_DEFINE_CLOCK_PLL(pll2_clk);
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- unsigned long parent_rate; \
- u32 reg, div; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \
- div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \
- parent_rate = clk_get_rate(clk->parent); \
- \
- return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \
- div, PARENT_RATE_SHIFT); \
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
-_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
-_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
-_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
-
-#define _DEFINE_CLOCK_REF(name, er, es) \
- static struct clk name = { \
- .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
- .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \
- .get_rate = name##_get_rate, \
- .enable = _raw_clk_enable, \
- .disable = _raw_clk_disable, \
- .parent = &pll0_clk, \
- }
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
-_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
-_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
-_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long lradc_clk_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 16;
-}
-
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
- /* ref_xtal_clk is implemented as the only parent */
- return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
- return clk->parent->get_rate(clk->parent) / 750;
-}
-
-static unsigned long spdif_clk_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 4;
-}
-
-#define _CLK_GET_RATE(name, rs) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, div; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- \
- if (clk->parent == &ref_xtal_clk) \
- div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \
- BP_CLKCTRL_##rs##_DIV_XTAL; \
- else \
- div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \
- BP_CLKCTRL_##rs##_DIV_##rs; \
- \
- if (!div) \
- return -EINVAL; \
- \
- return clk_get_rate(clk->parent) / div; \
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, div; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \
- \
- if (!div) \
- return -EINVAL; \
- \
- if (clk == &saif0_clk || clk == &saif1_clk) \
- return clk_get_rate(clk->parent) >> 16 * div; \
- else \
- return clk_get_rate(clk->parent) / div; \
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp0_clk, SSP0)
-_CLK_GET_RATE1(ssp1_clk, SSP1)
-_CLK_GET_RATE1(ssp2_clk, SSP2)
-_CLK_GET_RATE1(ssp3_clk, SSP3)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
-_CLK_GET_RATE1(saif0_clk, SAIF0)
-_CLK_GET_RATE1(saif1_clk, SAIF1)
-
-#define _CLK_GET_RATE_STUB(name) \
-static unsigned long name##_get_rate(struct clk *clk) \
-{ \
- return clk_get_rate(clk->parent); \
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-_CLK_GET_RATE_STUB(can0_clk)
-_CLK_GET_RATE_STUB(can1_clk)
-_CLK_GET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_rate
- */
-/* fool compiler */
-#define BM_CLKCTRL_CPU_DIV 0
-#define BP_CLKCTRL_CPU_DIV 0
-#define BM_CLKCTRL_CPU_BUSY 0
-
-#define _CLK_SET_RATE(name, dr, fr, fs) \
-static int name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u32 reg, bm_busy, div_max, d, f, div, frac; \
- unsigned long diff, parent_rate, calc_rate; \
- \
- div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
- bm_busy = BM_CLKCTRL_##dr##_BUSY; \
- \
- if (clk->parent == &ref_xtal_clk) { \
- parent_rate = clk_get_rate(clk->parent); \
- div = DIV_ROUND_UP(parent_rate, rate); \
- if (clk == &cpu_clk) { \
- div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \
- BP_CLKCTRL_CPU_DIV_XTAL; \
- bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; \
- } \
- if (div == 0 || div > div_max) \
- return -EINVAL; \
- } else { \
- /* \
- * hack alert: this block modifies clk->parent, too, \
- * so the base to use it the grand parent. \
- */ \
- parent_rate = clk_get_rate(clk->parent->parent); \
- rate >>= PARENT_RATE_SHIFT; \
- parent_rate >>= PARENT_RATE_SHIFT; \
- diff = parent_rate; \
- div = frac = 1; \
- if (clk == &cpu_clk) { \
- div_max = BM_CLKCTRL_CPU_DIV_CPU >> \
- BP_CLKCTRL_CPU_DIV_CPU; \
- bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; \
- } \
- for (d = 1; d <= div_max; d++) { \
- f = parent_rate * 18 / d / rate; \
- if ((parent_rate * 18 / d) % rate) \
- f++; \
- if (f < 18 || f > 35) \
- continue; \
- \
- calc_rate = parent_rate * 18 / f / d; \
- if (calc_rate > rate) \
- continue; \
- \
- if (rate - calc_rate < diff) { \
- frac = f; \
- div = d; \
- diff = rate - calc_rate; \
- } \
- \
- if (diff == 0) \
- break; \
- } \
- \
- if (diff == parent_rate) \
- return -EINVAL; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
- reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \
- reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
- } \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
- if (clk == &cpu_clk) { \
- reg &= ~BM_CLKCTRL_CPU_DIV_CPU; \
- reg |= div << BP_CLKCTRL_CPU_DIV_CPU; \
- } else { \
- reg &= ~BM_CLKCTRL_##dr##_DIV; \
- reg |= div << BP_CLKCTRL_##dr##_DIV; \
- if (reg & (1 << clk->enable_shift)) { \
- pr_err("%s: clock is gated\n", __func__); \
- return -EINVAL; \
- } \
- } \
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
- \
- return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy); \
-}
-
-_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
-_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
-_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
-_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
-_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
-_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
-_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
-
-#define _CLK_SET_RATE1(name, dr) \
-static int name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u32 reg, div_max, div; \
- unsigned long parent_rate; \
- \
- parent_rate = clk_get_rate(clk->parent); \
- div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
- \
- div = DIV_ROUND_UP(parent_rate, rate); \
- if (div == 0 || div > div_max) \
- return -EINVAL; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
- reg &= ~BM_CLKCTRL_##dr##_DIV; \
- reg |= div << BP_CLKCTRL_##dr##_DIV; \
- if (reg & (1 << clk->enable_shift)) { \
- pr_err("%s: clock is gated\n", __func__); \
- return -EINVAL; \
- } \
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
- \
- return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
-}
-
-_CLK_SET_RATE1(xbus_clk, XBUS)
-
-/* saif clock uses 16 bits frac div */
-#define _CLK_SET_RATE_SAIF(name, rs) \
-static int name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u16 div; \
- u32 reg; \
- u64 lrate; \
- unsigned long parent_rate; \
- \
- parent_rate = clk_get_rate(clk->parent); \
- if (rate > parent_rate) \
- return -EINVAL; \
- \
- lrate = (u64)rate << 16; \
- do_div(lrate, parent_rate); \
- div = (u16)lrate; \
- \
- if (!div) \
- return -EINVAL; \
- \
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- reg &= ~BM_CLKCTRL_##rs##_DIV; \
- reg |= div << BP_CLKCTRL_##rs##_DIV; \
- if (reg & (1 << clk->enable_shift)) { \
- pr_err("%s: clock is gated\n", __func__); \
- return -EINVAL; \
- } \
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- \
- return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\
-}
-
-_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
-_CLK_SET_RATE_SAIF(saif1_clk, SAIF1)
-
-#define _CLK_SET_RATE_STUB(name) \
-static int name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- return -EINVAL; \
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(spdif_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-_CLK_SET_RATE_STUB(can0_clk)
-_CLK_SET_RATE_STUB(can1_clk)
-_CLK_SET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit) \
-static int name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- if (parent != clk->parent) { \
- __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \
- clk->parent = parent; \
- } \
- \
- return 0; \
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp0_clk, SSP0)
-_CLK_SET_PARENT(ssp1_clk, SSP1)
-_CLK_SET_PARENT(ssp2_clk, SSP2)
-_CLK_SET_PARENT(ssp3_clk, SSP3)
-_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(saif0_clk, SAIF0)
-_CLK_SET_PARENT(saif1_clk, SAIF1)
-
-#define _CLK_SET_PARENT_STUB(name) \
-static int name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- if (parent != clk->parent) \
- return -EINVAL; \
- else \
- return 0; \
-}
-
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-_CLK_SET_PARENT_STUB(spdif_clk)
-_CLK_SET_PARENT_STUB(fec_clk)
-_CLK_SET_PARENT_STUB(can0_clk)
-_CLK_SET_PARENT_STUB(can1_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
- .get_rate = cpu_clk_get_rate,
- .set_rate = cpu_clk_set_rate,
- .set_parent = cpu_clk_set_parent,
- .parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
- .get_rate = hbus_clk_get_rate,
- .parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
- .get_rate = xbus_clk_get_rate,
- .set_rate = xbus_clk_set_rate,
- .parent = &ref_xtal_clk,
-};
-
-static struct clk lradc_clk = {
- .get_rate = lradc_clk_get_rate,
- .parent = &clk32k_clk,
-};
-
-static struct clk rtc_clk = {
- .get_rate = rtc_clk_get_rate,
- .parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb0_clk = {
- .enable_reg = DIGCTRL_BASE_ADDR,
- .enable_shift = 2,
- .enable = _raw_clk_enable,
- .disable = _raw_clk_disable,
- .parent = &pll0_clk,
-};
-
-static struct clk usb1_clk = {
- .enable_reg = DIGCTRL_BASE_ADDR,
- .enable_shift = 16,
- .enable = _raw_clk_enable,
- .disable = _raw_clk_disable,
- .parent = &pll1_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p) \
- static struct clk name = { \
- .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
- .enable_shift = BP_CLKCTRL_##er##_##es, \
- .get_rate = name##_get_rate, \
- .set_rate = name##_set_rate, \
- .set_parent = name##_set_parent, \
- .enable = _raw_clk_enable, \
- .disable = _raw_clk_disable, \
- .parent = p, \
- }
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk);
-_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk);
-_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- /* for amba bus driver */
- _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
- /* for amba-pl011 driver */
- _REGISTER_CLOCK("duart", NULL, uart_clk)
- _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
- _REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
- _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
- _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
- _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
- _REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk)
- _REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk)
- _REGISTER_CLOCK("rtc", NULL, rtc_clk)
- _REGISTER_CLOCK("pll2", NULL, pll2_clk)
- _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
- _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
- _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
- _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
- _REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk)
- _REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk)
- _REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
- _REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
- _REGISTER_CLOCK(NULL, "usb0", usb0_clk)
- _REGISTER_CLOCK(NULL, "usb1", usb1_clk)
- _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk)
- _REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk)
- _REGISTER_CLOCK(NULL, "lradc", lradc_clk)
- _REGISTER_CLOCK(NULL, "spdif", spdif_clk)
- _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
- _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
- _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
-};
-
-static int clk_misc_init(void)
-{
- u32 reg;
- int ret;
-
- /* Fix up parent per register setting */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
- cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
- &ref_xtal_clk : &ref_cpu_clk;
- emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
- &ref_xtal_clk : &ref_emi_clk;
- ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ?
- &ref_xtal_clk : &ref_io0_clk;
- ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ?
- &ref_xtal_clk : &ref_io0_clk;
- ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ?
- &ref_xtal_clk : &ref_io1_clk;
- ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ?
- &ref_xtal_clk : &ref_io1_clk;
- lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ?
- &ref_xtal_clk : &ref_pix_clk;
- gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
- &ref_xtal_clk : &ref_gpmi_clk;
- saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ?
- &ref_xtal_clk : &pll0_clk;
- saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ?
- &ref_xtal_clk : &pll0_clk;
-
- /* Use int div over frac when both are available */
- __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
- __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
- __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
- reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
- reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
- reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
- reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
- reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
- reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
- reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-
- /* SAIF has to use frac div for functional operation */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
- reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
- reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-
- /*
- * Set safe hbus clock divider. A divider of 3 ensure that
- * the Vddd voltage required for the cpu clock is sufficiently
- * high for the hbus clock.
- */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
- reg &= BM_CLKCTRL_HBUS_DIV;
- reg |= 3 << BP_CLKCTRL_HBUS_DIV;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
- ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY);
-
- /* Gate off cpu clock in WFI for power saving */
- __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
- CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
- /*
- * Extra fec clock setting
- * The DENX M28 uses an external clock source
- * and the clock output must not be enabled
- */
- if (!machine_is_m28evk()) {
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
- reg &= ~BM_CLKCTRL_ENET_SLEEP;
- reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
- }
-
- /*
- * 480 MHz seems too high to be ssp clock source directly,
- * so set frac0 to get a 288 MHz ref_io0.
- */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
- reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
- reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-
- return ret;
-}
-
-int __init mx28_clocks_init(void)
-{
- clk_misc_init();
-
- /*
- * source ssp clock from ref_io0 than ref_xtal,
- * as ref_xtal only provides 24 MHz as maximum.
- */
- clk_set_parent(&ssp0_clk, &ref_io0_clk);
- clk_set_parent(&ssp1_clk, &ref_io0_clk);
- clk_set_parent(&ssp2_clk, &ref_io1_clk);
- clk_set_parent(&ssp3_clk, &ref_io1_clk);
-
- clk_prepare_enable(&cpu_clk);
- clk_prepare_enable(&hbus_clk);
- clk_prepare_enable(&xbus_clk);
- clk_prepare_enable(&emi_clk);
- clk_prepare_enable(&uart_clk);
-
- clk_set_parent(&lcdif_clk, &ref_pix_clk);
- clk_set_parent(&saif0_clk, &pll0_clk);
- clk_set_parent(&saif1_clk, &pll0_clk);
-
- /*
- * Set an initial clock rate for the saif internal logic to work
- * properly. This is important when working in EXTMASTER mode that
- * uses the other saif's BITCLK&LRCLK but it still needs a basic
- * clock which should be fast enough for the internal logic.
- */
- clk_set_rate(&saif0_clk, 24000000);
- clk_set_rate(&saif1_clk, 24000000);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
-
- return 0;
-}
diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c
deleted file mode 100644
index 97a6f4a..0000000
--- a/arch/arm/mach-mxs/clock.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
- WARN_ON(!clk->usecount);
-
- if (!(--clk->usecount)) {
- if (clk->disable)
- clk->disable(clk);
- __clk_disable(clk->parent);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (clk->usecount++ == 0) {
- __clk_enable(clk->parent);
-
- if (clk->enable)
- clk->enable(clk);
- }
- return 0;
-}
-
-/*
- * The clk_enable/clk_disable could be called by drivers in atomic context,
- * so they should not really hold mutex. Instead, clk_prepare/clk_unprepare
- * can hold a mutex, as the pair will only be called in non-atomic context.
- * Before migrating to common clk framework, we can have __clk_enable and
- * __clk_disable called in clk_prepare/clk_unprepare with mutex held and
- * leave clk_enable/clk_disable as the dummy functions.
- */
-int clk_prepare(struct clk *clk)
-{
- int ret = 0;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_prepare);
-
-void clk_unprepare(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unprepare);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- /* nothing to do */
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
- struct clk *old;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL ||
- IS_ERR(parent) || clk->set_parent == NULL)
- return ret;
-
- if (clk->usecount)
- clk_prepare_enable(parent);
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_parent(clk, parent);
- if (ret == 0) {
- old = clk->parent;
- clk->parent = parent;
- } else {
- old = parent;
- }
- mutex_unlock(&clocks_mutex);
-
- if (clk->usecount)
- clk_disable(old);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- struct clk *ret = NULL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index b8913df..19659de 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -1,6 +1,5 @@
config MXS_HAVE_AMBA_DUART
bool
- select ARM_AMBA
config MXS_HAVE_PLATFORM_AUART
bool
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
index 6a0202b1..4682450 100644
--- a/arch/arm/mach-mxs/devices/platform-dma.c
+++ b/arch/arm/mach-mxs/devices/platform-dma.c
@@ -14,7 +14,7 @@
#include <mach/mx28.h>
#include <mach/devices-common.h>
-static struct platform_device *__init mxs_add_dma(const char *devid,
+struct platform_device *__init mxs_add_dma(const char *devid,
resource_size_t base)
{
struct resource res[] = {
@@ -29,22 +29,3 @@
res, ARRAY_SIZE(res), NULL, 0,
DMA_BIT_MASK(32));
}
-
-static int __init mxs_add_mxs_dma(void)
-{
- char *apbh = "mxs-dma-apbh";
- char *apbx = "mxs-dma-apbx";
-
- if (cpu_is_mx23()) {
- mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR);
- mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR);
- }
-
- if (cpu_is_mx28()) {
- mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR);
- mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR);
- }
-
- return 0;
-}
-arch_initcall(mxs_add_mxs_dma);
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
index ed0885e..cd99f19 100644
--- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
+++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
@@ -14,7 +14,7 @@
#include <mach/devices-common.h>
struct platform_device *__init mxs_add_gpio(
- int id, resource_size_t iobase, int irq)
+ char *name, int id, resource_size_t iobase, int irq)
{
struct resource res[] = {
{
@@ -29,25 +29,5 @@
};
return platform_device_register_resndata(&mxs_apbh_bus,
- "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0);
+ name, id, res, ARRAY_SIZE(res), NULL, 0);
}
-
-static int __init mxs_add_mxs_gpio(void)
-{
- if (cpu_is_mx23()) {
- mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
- mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
- mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
- }
-
- if (cpu_is_mx28()) {
- mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
- mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
- mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
- mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
- mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
- }
-
- return 0;
-}
-postcore_initcall(mxs_add_mxs_gpio);
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
index bef9d92..b33c9d0 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -17,8 +17,9 @@
#include <mach/mx28.h>
#include <mach/devices-common.h>
-#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \
+#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \
{ \
+ .devid = _devid, \
.id = _id, \
.iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
.dma = soc ## _DMA_SSP ## hwid, \
@@ -26,23 +27,23 @@
.irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
}
-#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \
- [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \
+ [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
#ifdef CONFIG_SOC_IMX23
const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
- mxs_mxs_mmc_data_entry(MX23, 0, 1),
- mxs_mxs_mmc_data_entry(MX23, 1, 2),
+ mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
+ mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
};
#endif
#ifdef CONFIG_SOC_IMX28
const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
- mxs_mxs_mmc_data_entry(MX28, 0, 0),
- mxs_mxs_mmc_data_entry(MX28, 1, 1),
- mxs_mxs_mmc_data_entry(MX28, 2, 2),
- mxs_mxs_mmc_data_entry(MX28, 3, 3),
+ mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
+ mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
+ mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
+ mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
};
#endif
@@ -70,6 +71,6 @@
},
};
- return mxs_add_platform_device("mxs-mmc", data->id,
+ return mxs_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h
deleted file mode 100644
index 592c9ab..0000000
--- a/arch/arm/mach-mxs/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_CLOCK_H__
-#define __MACH_MXS_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-struct module;
-
-struct clk {
- int id;
- /* Source clock this clk depends on */
- struct clk *parent;
- /* Reference count of clock enable/disable */
- __s8 usecount;
- /* Register bit position for clock's enable/disable control. */
- u8 enable_shift;
- /* Register address for clock's enable/disable control. */
- void __iomem *enable_reg;
- u32 flags;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __MACH_MXS_CLOCK_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 8d88399..de6c7ba 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -11,28 +11,27 @@
#ifndef __MACH_MXS_COMMON_H__
#define __MACH_MXS_COMMON_H__
-struct clk;
-
extern const u32 *mxs_get_ocotp(void);
extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(struct clk *, int);
+extern void mxs_timer_init(int);
extern void mxs_restart(char, const char *);
extern int mxs_saif_clkmux_select(unsigned int clkmux);
extern void mx23_soc_init(void);
-extern int mx23_register_gpios(void);
extern int mx23_clocks_init(void);
extern void mx23_map_io(void);
extern void mx23_init_irq(void);
extern void mx28_soc_init(void);
-extern int mx28_register_gpios(void);
extern int mx28_clocks_init(void);
extern void mx28_map_io(void);
extern void mx28_init_irq(void);
extern void icoll_init_irq(void);
-extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask);
+extern struct platform_device *mxs_add_dma(const char *devid,
+ resource_size_t base);
+extern struct platform_device *mxs_add_gpio(char *name, int id,
+ resource_size_t iobase, int irq);
#endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 21e45a70..e8b1d95 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -82,8 +82,9 @@
const struct mxs_mxs_i2c_data *data);
/* mmc */
-#include <mach/mmc.h>
+#include <linux/mmc/mxs-mmc.h>
struct mxs_mxs_mmc_data {
+ const char *devid;
int id;
resource_size_t iobase;
resource_size_t dma;
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index da4610e..dafd48e 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -226,7 +226,7 @@
struct clk *clk;
/* Enable fec phy clock */
- clk = clk_get_sys("pll2", NULL);
+ clk = clk_get_sys("enet_out", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
new file mode 100644
index 0000000..8cac94b
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/init.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static int __init mxs_icoll_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
+
+ return 0;
+}
+
+static int __init mxs_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXS_GPIO_IRQ_START;
+
+ irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
+ gpio_irq_base += 32;
+
+ return 0;
+}
+
+static const struct of_device_id mxs_irq_match[] __initconst = {
+ { .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, },
+ { .compatible = "fsl,mxs-gpio", .data = mxs_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static void __init mxs_dt_init_irq(void)
+{
+ icoll_init_irq();
+ of_irq_init(mxs_irq_match);
+}
+
+static void __init imx23_timer_init(void)
+{
+ mx23_clocks_init();
+}
+
+static struct sys_timer imx23_timer = {
+ .init = imx23_timer_init,
+};
+
+static void __init imx28_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer imx28_timer = {
+ .init = imx28_timer_init,
+};
+
+static void __init imx28_evk_init(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
+static void __init mxs_machine_init(void)
+{
+ if (of_machine_is_compatible("fsl,imx28-evk"))
+ imx28_evk_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+}
+
+static const char *imx23_dt_compat[] __initdata = {
+ "fsl,imx23-evk",
+ "fsl,imx23",
+ NULL,
+};
+
+static const char *imx28_dt_compat[] __initdata = {
+ "fsl,imx28-evk",
+ "fsl,imx28",
+ NULL,
+};
+
+DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
+ .map_io = mx23_map_io,
+ .init_irq = mxs_dt_init_irq,
+ .timer = &imx23_timer,
+ .init_machine = mxs_machine_init,
+ .dt_compat = imx23_dt_compat,
+ .restart = mxs_restart,
+MACHINE_END
+
+DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
+ .map_io = mx28_map_io,
+ .init_irq = mxs_dt_init_irq,
+ .timer = &imx28_timer,
+ .init_machine = mxs_machine_init,
+ .dt_compat = imx28_dt_compat,
+ .restart = mxs_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index 67a384e..dccb67a 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -66,9 +66,25 @@
void __init mx23_soc_init(void)
{
pinctrl_provide_dummies();
+
+ mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
+ mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
+
+ mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
+ mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
+ mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
}
void __init mx28_soc_init(void)
{
pinctrl_provide_dummies();
+
+ mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
+ mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
+
+ mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
+ mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
+ mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
+ mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
+ mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
}
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
deleted file mode 100644
index 0ea5c9d..0000000
--- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX23_H__
-#define __REGS_CLKCTRL_MX23_H__
-
-
-#define HW_CLKCTRL_PLLCTRL0 (0x00000000)
-#define HW_CLKCTRL_PLLCTRL0_SET (0x00000004)
-#define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008)
-#define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c)
-
-#define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28
-#define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000
-#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \
- (((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_CP_SEL 24
-#define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000
-#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \
- (((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL)
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20
-#define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000
-#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \
- (((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-#define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000
-
-#define HW_CLKCTRL_PLLCTRL1 (0x00000010)
-
-#define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000
-#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000
-#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0
-#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF
-#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \
- (((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_CPU (0x00000020)
-#define HW_CLKCTRL_CPU_SET (0x00000024)
-#define HW_CLKCTRL_CPU_CLR (0x00000028)
-#define HW_CLKCTRL_CPU_TOG (0x0000002c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL 16
-#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v) \
- (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v) \
- (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS (0x00000030)
-#define HW_CLKCTRL_HBUS_SET (0x00000034)
-#define HW_CLKCTRL_HBUS_CLR (0x00000038)
-#define HW_CLKCTRL_HBUS_TOG (0x0000003c)
-
-#define BM_CLKCTRL_HBUS_BUSY 0x20000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000
-#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000
-#define BP_CLKCTRL_HBUS_SLOW_DIV 16
-#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \
- (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
-#define BP_CLKCTRL_HBUS_DIV 0
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS (0x00000040)
-
-#define BM_CLKCTRL_XBUS_BUSY 0x80000000
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400
-#define BP_CLKCTRL_XBUS_DIV 0
-#define BM_CLKCTRL_XBUS_DIV 0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL (0x00000050)
-#define HW_CLKCTRL_XTAL_SET (0x00000054)
-#define HW_CLKCTRL_XTAL_CLR (0x00000058)
-#define HW_CLKCTRL_XTAL_TOG (0x0000005c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000
-#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE 30
-#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE 0x40000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
-#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART 0
-#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v) \
- (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_PIX (0x00000060)
-
-#define BP_CLKCTRL_PIX_CLKGATE 31
-#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-#define BM_CLKCTRL_PIX_BUSY 0x20000000
-#define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000
-#define BP_CLKCTRL_PIX_DIV 0
-#define BM_CLKCTRL_PIX_DIV 0x00000FFF
-#define BF_CLKCTRL_PIX_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_PIX_DIV)
-
-#define HW_CLKCTRL_SSP (0x00000070)
-
-#define BP_CLKCTRL_SSP_CLKGATE 31
-#define BM_CLKCTRL_SSP_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP_BUSY 0x20000000
-#define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200
-#define BP_CLKCTRL_SSP_DIV 0
-#define BM_CLKCTRL_SSP_DIV 0x000001FF
-#define BF_CLKCTRL_SSP_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SSP_DIV)
-
-#define HW_CLKCTRL_GPMI (0x00000080)
-
-#define BP_CLKCTRL_GPMI_CLKGATE 31
-#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000
-#define BM_CLKCTRL_GPMI_BUSY 0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400
-#define BP_CLKCTRL_GPMI_DIV 0
-#define BM_CLKCTRL_GPMI_DIV 0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF (0x00000090)
-
-#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_EMI (0x000000a0)
-
-#define BP_CLKCTRL_EMI_CLKGATE 31
-#define BM_CLKCTRL_EMI_CLKGATE 0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL 8
-#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v) \
- (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI 0
-#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v) \
- (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_IR (0x000000b0)
-
-#define BM_CLKCTRL_IR_CLKGATE 0x80000000
-#define BM_CLKCTRL_IR_AUTO_DIV 0x20000000
-#define BM_CLKCTRL_IR_IR_BUSY 0x10000000
-#define BM_CLKCTRL_IR_IROV_BUSY 0x08000000
-#define BP_CLKCTRL_IR_IROV_DIV 16
-#define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000
-#define BF_CLKCTRL_IR_IROV_DIV(v) \
- (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
-#define BP_CLKCTRL_IR_IR_DIV 0
-#define BM_CLKCTRL_IR_IR_DIV 0x000003FF
-#define BF_CLKCTRL_IR_IR_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_IR_IR_DIV)
-
-#define HW_CLKCTRL_SAIF (0x000000c0)
-
-#define BM_CLKCTRL_SAIF_CLKGATE 0x80000000
-#define BM_CLKCTRL_SAIF_BUSY 0x20000000
-#define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000
-#define BP_CLKCTRL_SAIF_DIV 0
-#define BM_CLKCTRL_SAIF_DIV 0x0000FFFF
-#define BF_CLKCTRL_SAIF_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SAIF_DIV)
-
-#define HW_CLKCTRL_TV (0x000000d0)
-
-#define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000
-#define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000
-
-#define HW_CLKCTRL_ETM (0x000000e0)
-
-#define BM_CLKCTRL_ETM_CLKGATE 0x80000000
-#define BM_CLKCTRL_ETM_BUSY 0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040
-#define BP_CLKCTRL_ETM_DIV 0
-#define BM_CLKCTRL_ETM_DIV 0x0000003F
-#define BF_CLKCTRL_ETM_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_FRAC (0x000000f0)
-#define HW_CLKCTRL_FRAC_SET (0x000000f4)
-#define HW_CLKCTRL_FRAC_CLR (0x000000f8)
-#define HW_CLKCTRL_FRAC_TOG (0x000000fc)
-
-#define BP_CLKCTRL_FRAC_CLKGATEIO 31
-#define BM_CLKCTRL_FRAC_CLKGATEIO 0x80000000
-#define BM_CLKCTRL_FRAC_IO_STABLE 0x40000000
-#define BP_CLKCTRL_FRAC_IOFRAC 24
-#define BM_CLKCTRL_FRAC_IOFRAC 0x3F000000
-#define BF_CLKCTRL_FRAC_IOFRAC(v) \
- (((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEPIX 23
-#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
-#define BM_CLKCTRL_FRAC_PIX_STABLE 0x00400000
-#define BP_CLKCTRL_FRAC_PIXFRAC 16
-#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
-#define BF_CLKCTRL_FRAC_PIXFRAC(v) \
- (((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEEMI 15
-#define BM_CLKCTRL_FRAC_CLKGATEEMI 0x00008000
-#define BM_CLKCTRL_FRAC_EMI_STABLE 0x00004000
-#define BP_CLKCTRL_FRAC_EMIFRAC 8
-#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
-#define BF_CLKCTRL_FRAC_EMIFRAC(v) \
- (((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATECPU 7
-#define BM_CLKCTRL_FRAC_CLKGATECPU 0x00000080
-#define BM_CLKCTRL_FRAC_CPU_STABLE 0x00000040
-#define BP_CLKCTRL_FRAC_CPUFRAC 0
-#define BM_CLKCTRL_FRAC_CPUFRAC 0x0000003F
-#define BF_CLKCTRL_FRAC_CPUFRAC(v) \
- (((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1 (0x00000100)
-#define HW_CLKCTRL_FRAC1_SET (0x00000104)
-#define HW_CLKCTRL_FRAC1_CLR (0x00000108)
-#define HW_CLKCTRL_FRAC1_TOG (0x0000010c)
-
-#define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000
-#define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000
-
-#define HW_CLKCTRL_CLKSEQ (0x00000110)
-#define HW_CLKCTRL_CLKSEQ_SET (0x00000114)
-#define HW_CLKCTRL_CLKSEQ_CLR (0x00000118)
-#define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001
-
-#define HW_CLKCTRL_RESET (0x00000120)
-
-#define BM_CLKCTRL_RESET_CHIP 0x00000002
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-
-#define HW_CLKCTRL_STATUS (0x00000130)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT 30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
- (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION (0x00000140)
-
-#define BP_CLKCTRL_VERSION_MAJOR 24
-#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
- (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR 16
-#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v) \
- (((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP 0
-#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v) \
- (((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX23_H__ */
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
deleted file mode 100644
index 7d1b061..0000000
--- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX28_H__
-#define __REGS_CLKCTRL_MX28_H__
-
-#define HW_CLKCTRL_PLL0CTRL0 (0x00000000)
-#define HW_CLKCTRL_PLL0CTRL0_SET (0x00000004)
-#define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008)
-#define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c)
-
-#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28
-#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000
-#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \
- (((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24
-#define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000
-#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \
- (((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20
-#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000
-#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \
- (((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000
-#define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000
-
-#define HW_CLKCTRL_PLL0CTRL1 (0x00000010)
-
-#define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000
-#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000
-#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0
-#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF
-#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \
- (((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL1CTRL0 (0x00000020)
-#define HW_CLKCTRL_PLL1CTRL0_SET (0x00000024)
-#define HW_CLKCTRL_PLL1CTRL0_CLR (0x00000028)
-#define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c)
-
-#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000
-#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28
-#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000
-#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \
- (((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24
-#define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000
-#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \
- (((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20
-#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000
-#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \
- (((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT 0x0
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000
-#define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000
-
-#define HW_CLKCTRL_PLL1CTRL1 (0x00000030)
-
-#define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000
-#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000
-#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0
-#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF
-#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \
- (((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL2CTRL0 (0x00000040)
-#define HW_CLKCTRL_PLL2CTRL0_SET (0x00000044)
-#define HW_CLKCTRL_PLL2CTRL0_CLR (0x00000048)
-#define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c)
-
-#define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000
-#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28
-#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000
-#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \
- (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000
-#define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24
-#define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000
-#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \
- (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000
-
-#define HW_CLKCTRL_CPU (0x00000050)
-#define HW_CLKCTRL_CPU_SET (0x00000054)
-#define HW_CLKCTRL_CPU_CLR (0x00000058)
-#define HW_CLKCTRL_CPU_TOG (0x0000005c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL 16
-#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v) \
- (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v) \
- (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS (0x00000060)
-#define HW_CLKCTRL_HBUS_SET (0x00000064)
-#define HW_CLKCTRL_HBUS_CLR (0x00000068)
-#define HW_CLKCTRL_HBUS_TOG (0x0000006c)
-
-#define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000
-#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000
-#define BM_CLKCTRL_HBUS_ASM_ENABLE 0x00100000
-#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE 0x00080000
-#define BP_CLKCTRL_HBUS_SLOW_DIV 16
-#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \
- (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
-#define BP_CLKCTRL_HBUS_DIV 0
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS (0x00000070)
-
-#define BM_CLKCTRL_XBUS_BUSY 0x80000000
-#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400
-#define BP_CLKCTRL_XBUS_DIV 0
-#define BM_CLKCTRL_XBUS_DIV 0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL (0x00000080)
-#define HW_CLKCTRL_XTAL_SET (0x00000084)
-#define HW_CLKCTRL_XTAL_CLR (0x00000088)
-#define HW_CLKCTRL_XTAL_TOG (0x0000008c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART 0
-#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v) \
- (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_SSP0 (0x00000090)
-
-#define BP_CLKCTRL_SSP0_CLKGATE 31
-#define BM_CLKCTRL_SSP0_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP0_BUSY 0x20000000
-#define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200
-#define BP_CLKCTRL_SSP0_DIV 0
-#define BM_CLKCTRL_SSP0_DIV 0x000001FF
-#define BF_CLKCTRL_SSP0_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SSP0_DIV)
-
-#define HW_CLKCTRL_SSP1 (0x000000a0)
-
-#define BP_CLKCTRL_SSP1_CLKGATE 31
-#define BM_CLKCTRL_SSP1_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP1_BUSY 0x20000000
-#define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200
-#define BP_CLKCTRL_SSP1_DIV 0
-#define BM_CLKCTRL_SSP1_DIV 0x000001FF
-#define BF_CLKCTRL_SSP1_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SSP1_DIV)
-
-#define HW_CLKCTRL_SSP2 (0x000000b0)
-
-#define BP_CLKCTRL_SSP2_CLKGATE 31
-#define BM_CLKCTRL_SSP2_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP2_BUSY 0x20000000
-#define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200
-#define BP_CLKCTRL_SSP2_DIV 0
-#define BM_CLKCTRL_SSP2_DIV 0x000001FF
-#define BF_CLKCTRL_SSP2_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SSP2_DIV)
-
-#define HW_CLKCTRL_SSP3 (0x000000c0)
-
-#define BP_CLKCTRL_SSP3_CLKGATE 31
-#define BM_CLKCTRL_SSP3_CLKGATE 0x80000000
-#define BM_CLKCTRL_SSP3_BUSY 0x20000000
-#define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200
-#define BP_CLKCTRL_SSP3_DIV 0
-#define BM_CLKCTRL_SSP3_DIV 0x000001FF
-#define BF_CLKCTRL_SSP3_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SSP3_DIV)
-
-#define HW_CLKCTRL_GPMI (0x000000d0)
-
-#define BP_CLKCTRL_GPMI_CLKGATE 31
-#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000
-#define BM_CLKCTRL_GPMI_BUSY 0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400
-#define BP_CLKCTRL_GPMI_DIV 0
-#define BM_CLKCTRL_GPMI_DIV 0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF (0x000000e0)
-
-#define BP_CLKCTRL_SPDIF_CLKGATE 31
-#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_EMI (0x000000f0)
-
-#define BP_CLKCTRL_EMI_CLKGATE 31
-#define BM_CLKCTRL_EMI_CLKGATE 0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL 8
-#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v) \
- (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI 0
-#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v) \
- (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_SAIF0 (0x00000100)
-
-#define BP_CLKCTRL_SAIF0_CLKGATE 31
-#define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000
-#define BM_CLKCTRL_SAIF0_BUSY 0x20000000
-#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000
-#define BP_CLKCTRL_SAIF0_DIV 0
-#define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF
-#define BF_CLKCTRL_SAIF0_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
-
-#define HW_CLKCTRL_SAIF1 (0x00000110)
-
-#define BP_CLKCTRL_SAIF1_CLKGATE 31
-#define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000
-#define BM_CLKCTRL_SAIF1_BUSY 0x20000000
-#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000
-#define BP_CLKCTRL_SAIF1_DIV 0
-#define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF
-#define BF_CLKCTRL_SAIF1_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_SAIF1_DIV)
-
-#define HW_CLKCTRL_DIS_LCDIF (0x00000120)
-
-#define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31
-#define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000
-#define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000
-#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000
-#define BP_CLKCTRL_DIS_LCDIF_DIV 0
-#define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF
-#define BF_CLKCTRL_DIS_LCDIF_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV)
-
-#define HW_CLKCTRL_ETM (0x00000130)
-
-#define BM_CLKCTRL_ETM_CLKGATE 0x80000000
-#define BM_CLKCTRL_ETM_BUSY 0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080
-#define BP_CLKCTRL_ETM_DIV 0
-#define BM_CLKCTRL_ETM_DIV 0x0000007F
-#define BF_CLKCTRL_ETM_DIV(v) \
- (((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_ENET (0x00000140)
-
-#define BM_CLKCTRL_ENET_SLEEP 0x80000000
-#define BP_CLKCTRL_ENET_DISABLE 30
-#define BM_CLKCTRL_ENET_DISABLE 0x40000000
-#define BM_CLKCTRL_ENET_STATUS 0x20000000
-#define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000
-#define BP_CLKCTRL_ENET_DIV_TIME 21
-#define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000
-#define BF_CLKCTRL_ENET_DIV_TIME(v) \
- (((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME)
-#define BM_CLKCTRL_ENET_BUSY 0x08000000
-#define BP_CLKCTRL_ENET_DIV 21
-#define BM_CLKCTRL_ENET_DIV 0x07E00000
-#define BF_CLKCTRL_ENET_DIV(v) \
- (((v) << 21) & BM_CLKCTRL_ENET_DIV)
-#define BP_CLKCTRL_ENET_TIME_SEL 19
-#define BM_CLKCTRL_ENET_TIME_SEL 0x00180000
-#define BF_CLKCTRL_ENET_TIME_SEL(v) \
- (((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL)
-#define BV_CLKCTRL_ENET_TIME_SEL__XTAL 0x0
-#define BV_CLKCTRL_ENET_TIME_SEL__PLL 0x1
-#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK 0x2
-#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000
-#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000
-#define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000
-
-#define HW_CLKCTRL_HSADC (0x00000150)
-
-#define BM_CLKCTRL_HSADC_RESETB 0x40000000
-#define BP_CLKCTRL_HSADC_FREQDIV 28
-#define BM_CLKCTRL_HSADC_FREQDIV 0x30000000
-#define BF_CLKCTRL_HSADC_FREQDIV(v) \
- (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
-
-#define HW_CLKCTRL_FLEXCAN (0x00000160)
-
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000
-#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000
-#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000
-
-#define HW_CLKCTRL_FRAC0 (0x000001b0)
-#define HW_CLKCTRL_FRAC0_SET (0x000001b4)
-#define HW_CLKCTRL_FRAC0_CLR (0x000001b8)
-#define HW_CLKCTRL_FRAC0_TOG (0x000001bc)
-
-#define BP_CLKCTRL_FRAC0_CLKGATEIO0 31
-#define BM_CLKCTRL_FRAC0_CLKGATEIO0 0x80000000
-#define BM_CLKCTRL_FRAC0_IO0_STABLE 0x40000000
-#define BP_CLKCTRL_FRAC0_IO0FRAC 24
-#define BM_CLKCTRL_FRAC0_IO0FRAC 0x3F000000
-#define BF_CLKCTRL_FRAC0_IO0FRAC(v) \
- (((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEIO1 23
-#define BM_CLKCTRL_FRAC0_CLKGATEIO1 0x00800000
-#define BM_CLKCTRL_FRAC0_IO1_STABLE 0x00400000
-#define BP_CLKCTRL_FRAC0_IO1FRAC 16
-#define BM_CLKCTRL_FRAC0_IO1FRAC 0x003F0000
-#define BF_CLKCTRL_FRAC0_IO1FRAC(v) \
- (((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEEMI 15
-#define BM_CLKCTRL_FRAC0_CLKGATEEMI 0x00008000
-#define BM_CLKCTRL_FRAC0_EMI_STABLE 0x00004000
-#define BP_CLKCTRL_FRAC0_EMIFRAC 8
-#define BM_CLKCTRL_FRAC0_EMIFRAC 0x00003F00
-#define BF_CLKCTRL_FRAC0_EMIFRAC(v) \
- (((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATECPU 7
-#define BM_CLKCTRL_FRAC0_CLKGATECPU 0x00000080
-#define BM_CLKCTRL_FRAC0_CPU_STABLE 0x00000040
-#define BP_CLKCTRL_FRAC0_CPUFRAC 0
-#define BM_CLKCTRL_FRAC0_CPUFRAC 0x0000003F
-#define BF_CLKCTRL_FRAC0_CPUFRAC(v) \
- (((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1 (0x000001c0)
-#define HW_CLKCTRL_FRAC1_SET (0x000001c4)
-#define HW_CLKCTRL_FRAC1_CLR (0x000001c8)
-#define HW_CLKCTRL_FRAC1_TOG (0x000001cc)
-
-#define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23
-#define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000
-#define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000
-#define BP_CLKCTRL_FRAC1_GPMIFRAC 16
-#define BM_CLKCTRL_FRAC1_GPMIFRAC 0x003F0000
-#define BF_CLKCTRL_FRAC1_GPMIFRAC(v) \
- (((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEHSADC 15
-#define BM_CLKCTRL_FRAC1_CLKGATEHSADC 0x00008000
-#define BM_CLKCTRL_FRAC1_HSADC_STABLE 0x00004000
-#define BP_CLKCTRL_FRAC1_HSADCFRAC 8
-#define BM_CLKCTRL_FRAC1_HSADCFRAC 0x00003F00
-#define BF_CLKCTRL_FRAC1_HSADCFRAC(v) \
- (((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEPIX 7
-#define BM_CLKCTRL_FRAC1_CLKGATEPIX 0x00000080
-#define BM_CLKCTRL_FRAC1_PIX_STABLE 0x00000040
-#define BP_CLKCTRL_FRAC1_PIXFRAC 0
-#define BM_CLKCTRL_FRAC1_PIXFRAC 0x0000003F
-#define BF_CLKCTRL_FRAC1_PIXFRAC(v) \
- (((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC)
-
-#define HW_CLKCTRL_CLKSEQ (0x000001d0)
-#define HW_CLKCTRL_CLKSEQ_SET (0x000001d4)
-#define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8)
-#define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000
-#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2 0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1 0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0 0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000004
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1 0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0 0x00000001
-
-#define HW_CLKCTRL_RESET (0x000001e0)
-
-#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020
-#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010
-#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008
-#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT 0x00000004
-#define BM_CLKCTRL_RESET_CHIP 0x00000002
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-
-#define HW_CLKCTRL_STATUS (0x000001f0)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT 30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
- (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION (0x00000200)
-
-#define BP_CLKCTRL_VERSION_MAJOR 24
-#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
- (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR 16
-#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v) \
- (((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP 0
-#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v) \
- (((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX28_H__ */
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 80ac1fc..30042e2 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -37,8 +37,6 @@
#define MXS_MODULE_CLKGATE (1 << 30)
#define MXS_MODULE_SFTRST (1 << 31)
-#define CLKCTRL_TIMEOUT 10 /* 10 ms */
-
static void __iomem *mxs_clkctrl_reset_addr;
/*
@@ -139,17 +137,3 @@
return -ETIMEDOUT;
}
EXPORT_SYMBOL(mxs_reset_block);
-
-int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT);
- while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR)
- + reg_offset) & mask) {
- if (time_after(jiffies, timeout)) {
- pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset);
- return -ETIMEDOUT;
- }
- }
-
- return 0;
-}
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 564a632..02d36de 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -20,6 +20,7 @@
* MA 02110-1301, USA.
*/
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
@@ -243,8 +244,16 @@
return 0;
}
-void __init mxs_timer_init(struct clk *timer_clk, int irq)
+void __init mxs_timer_init(int irq)
{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("timrot", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("%s: failed to get clk\n", __func__);
+ return;
+ }
+
clk_prepare_enable(timer_clk);
/*
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c1b681e..f2f8a58 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -595,7 +595,12 @@
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
-late_initcall(late_init);
+
+static void __init ams_delta_init_late(void)
+{
+ omap1_init_late();
+ late_init();
+}
static void __init ams_delta_map_io(void)
{
@@ -611,6 +616,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
+ .init_late = ams_delta_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4a4afb3..c7364fd 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -369,6 +369,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 9a5fe58..e75e2d5 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -88,6 +88,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 057ec13..7e50368 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -431,6 +431,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h2_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f6ddf87..9fb03f1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -425,6 +425,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 60c06ee..118a9d4 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -605,6 +605,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 67d7fd5..7970223 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -457,6 +457,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d21dcc2..7212ae9 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -255,6 +255,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a5f85dd..da8d872 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -574,6 +574,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = osk_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a60e6c2..949b62a 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -267,6 +267,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8d85487..7f1e1cf 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -313,6 +313,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 61ed4f0..3c71c6b 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -330,6 +330,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index a2c8889..f2cb243 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -331,6 +331,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index f34cb74..3b7b82b1 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -407,6 +407,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 37232d0..afd67f0 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -294,6 +294,7 @@
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
+ .init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = voiceblue_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index bb7779b..c2552b2 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -53,8 +53,18 @@
}
#endif
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+int omap_serial_wakeup_init(void);
+#else
+static inline int omap_serial_wakeup_init(void)
+{
+ return 0;
+}
+#endif
+
void omap1_init_early(void);
void omap1_init_irq(void);
+void omap1_init_late(void);
void omap1_restart(char, const char *);
extern void __init omap_check_revision(void);
@@ -63,7 +73,14 @@
unsigned int ctrl);
extern struct sys_timer omap1_timer;
-extern bool omap_32k_timer_init(void);
+#ifdef CONFIG_OMAP_32K_TIMER
+extern int omap_32k_timer_init(void);
+#else
+static inline int __init omap_32k_timer_init(void)
+{
+ return -ENODEV;
+}
+#endif
extern u32 omap_irq_flags;
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index dcd8ddb..fa1fa4d 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
+#include <plat/dma.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
@@ -31,6 +32,22 @@
#include "common.h"
#include "clock.h"
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+ .name = "omap-pcm-audio",
+ .id = -1,
+};
+
+static void omap_init_audio(void)
+{
+ platform_device_register(&omap_pcm);
+}
+
+#else
+static inline void omap_init_audio(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -128,6 +145,56 @@
}
}
+#define OMAP_MMC_NR_RES 4
+
+/*
+ * Register MMC devices.
+ */
+static int __init omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ unsigned rx_req, unsigned tx_req,
+ struct omap_mmc_platform_data *data)
+{
+ struct platform_device *pdev;
+ struct resource res[OMAP_MMC_NR_RES];
+ int ret;
+
+ pdev = platform_device_alloc(name, id);
+ if (!pdev)
+ return -ENOMEM;
+
+ memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+ res[0].start = base;
+ res[0].end = base + size - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = res[1].end = irq;
+ res[1].flags = IORESOURCE_IRQ;
+ res[2].start = rx_req;
+ res[2].name = "rx";
+ res[2].flags = IORESOURCE_DMA;
+ res[3].start = tx_req;
+ res[3].name = "tx";
+ res[3].flags = IORESOURCE_DMA;
+
+ ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+ if (ret == 0)
+ ret = platform_device_add_data(pdev, data, sizeof(*data));
+ if (ret)
+ goto fail;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto fail;
+
+ /* return device handle to board setup code */
+ data->dev = &pdev->dev;
+ return 0;
+
+fail:
+ platform_device_put(pdev);
+ return ret;
+}
+
void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
@@ -135,6 +202,7 @@
for (i = 0; i < nr_controllers; i++) {
unsigned long base, size;
+ unsigned rx_req, tx_req;
unsigned int irq = 0;
if (!mmc_data[i])
@@ -146,19 +214,24 @@
case 0:
base = OMAP1_MMC1_BASE;
irq = INT_MMC;
+ rx_req = OMAP_DMA_MMC_RX;
+ tx_req = OMAP_DMA_MMC_TX;
break;
case 1:
if (!cpu_is_omap16xx())
return;
base = OMAP1_MMC2_BASE;
irq = INT_1610_MMC2;
+ rx_req = OMAP_DMA_MMC2_RX;
+ tx_req = OMAP_DMA_MMC2_TX;
break;
default:
continue;
}
size = OMAP1_MMC_SIZE;
- omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
+ omap_mmc_add("mmci-omap", i, base, size, irq,
+ rx_req, tx_req, mmc_data[i]);
};
}
@@ -242,23 +315,48 @@
static inline void omap_init_sti(void) {}
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+/* Numbering for the SPI-capable controllers when used for SPI:
+ * spi = 1
+ * uwire = 2
+ * mmc1..2 = 3..4
+ * mcbsp1..3 = 5..7
+ */
-static struct platform_device omap_pcm = {
- .name = "omap-pcm-audio",
- .id = -1,
+#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+
+#define OMAP_UWIRE_BASE 0xfffb3000
+
+static struct resource uwire_resources[] = {
+ {
+ .start = OMAP_UWIRE_BASE,
+ .end = OMAP_UWIRE_BASE + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
};
-static void omap_init_audio(void)
-{
- platform_device_register(&omap_pcm);
-}
+static struct platform_device omap_uwire_device = {
+ .name = "omap_uwire",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(uwire_resources),
+ .resource = uwire_resources,
+};
+static void omap_init_uwire(void)
+{
+ /* FIXME define and use a boot tag; not all boards will be hooking
+ * up devices to the microwire controller, and multi-board configs
+ * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
+ */
+
+ /* board-specific code must configure chipselects (only a few
+ * are normally used) and SCLK/SDI/SDO (each has two choices).
+ */
+ (void) platform_device_register(&omap_uwire_device);
+}
#else
-static inline void omap_init_audio(void) {}
+static inline void omap_init_uwire(void) {}
#endif
-/*-------------------------------------------------------------------------*/
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
@@ -292,11 +390,12 @@
* in alphabetical order so they're easier to sort through.
*/
+ omap_init_audio();
omap_init_mbox();
omap_init_rtc();
omap_init_spi100k();
omap_init_sti();
- omap_init_audio();
+ omap_init_uwire();
return 0;
}
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 71ce017..6c95a59 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -137,6 +137,11 @@
omap_init_consistent_dma_size();
}
+void __init omap1_init_late(void)
+{
+ omap_serial_wakeup_init();
+}
+
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 93ae8f2..6809c9e 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -237,7 +237,7 @@
enable_irq_wake(gpio_to_irq(gpio_nr));
}
-static int __init omap_serial_wakeup_init(void)
+int __init omap_serial_wakeup_init(void)
{
if (!cpu_is_omap16xx())
return 0;
@@ -251,7 +251,6 @@
return 0;
}
-late_initcall(omap_serial_wakeup_init);
#endif /* CONFIG_OMAP_SERIAL_WAKE */
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d8dd9a..4062480 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -232,20 +232,6 @@
}
#endif /* CONFIG_OMAP_MPU_TIMER */
-static inline int omap_32k_timer_usable(void)
-{
- int res = false;
-
- if (cpu_is_omap730() || cpu_is_omap15xx())
- return res;
-
-#ifdef CONFIG_OMAP_32K_TIMER
- res = omap_32k_timer_init();
-#endif
-
- return res;
-}
-
/*
* ---------------------------------------------------------------------------
* Timer initialization
@@ -253,7 +239,7 @@
*/
static void __init omap1_timer_init(void)
{
- if (!omap_32k_timer_usable())
+ if (omap_32k_timer_init() != 0)
omap_mpu_timer_init();
}
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 325b9a0..eae49c3 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -71,6 +71,7 @@
/* 16xx specific defines */
#define OMAP1_32K_TIMER_BASE 0xfffb9000
+#define OMAP1_32KSYNC_TIMER_BASE 0xfffbc400
#define OMAP1_32K_TIMER_CR 0x08
#define OMAP1_32K_TIMER_TVR 0x00
#define OMAP1_32K_TIMER_TCR 0x04
@@ -182,10 +183,29 @@
* Timer initialization
* ---------------------------------------------------------------------------
*/
-bool __init omap_32k_timer_init(void)
+int __init omap_32k_timer_init(void)
{
- omap_init_clocksource_32k();
- omap_init_32k_timer();
+ int ret = -ENODEV;
- return true;
+ if (cpu_is_omap16xx()) {
+ void __iomem *base;
+ struct clk *sync32k_ick;
+
+ base = ioremap(OMAP1_32KSYNC_TIMER_BASE, SZ_1K);
+ if (!base) {
+ pr_err("32k_counter: failed to map base addr\n");
+ return -ENODEV;
+ }
+
+ sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
+ if (!IS_ERR(sync32k_ick))
+ clk_enable(sync32k_ick);
+
+ ret = omap_init_clocksource_32k(base);
+ }
+
+ if (!ret)
+ omap_init_32k_timer();
+
+ return ret;
}
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 964ee67..4cf5142 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -78,12 +78,12 @@
default y
select ARCH_OMAP_OTG
-config SOC_OMAPTI81XX
+config SOC_TI81XX
bool "TI81XX support"
depends on ARCH_OMAP3
default y
-config SOC_OMAPAM33XX
+config SOC_AM33XX
bool "AM33XX support"
depends on ARCH_OMAP3
default y
@@ -320,12 +320,12 @@
config MACH_TI8168EVM
bool "TI8168 Evaluation Module"
- depends on SOC_OMAPTI81XX
+ depends on SOC_TI81XX
default y
config MACH_TI8148EVM
bool "TI8148 Evaluation Module"
- depends on SOC_OMAPTI81XX
+ depends on SOC_TI81XX
default y
config MACH_OMAP_4430SDP
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 385c083..fa742f3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -24,10 +24,11 @@
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
# SMP support ONLY available for OMAP4
+
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \
- sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
+obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -64,10 +65,10 @@
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
- cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \
- cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
@@ -84,90 +85,86 @@
# PRCM
obj-y += prm_common.o
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
- vc3xxx_data.o vp3xxx_data.o
-# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
-# will be removed once the OMAP4 part of the codebase is converted to
-# use OMAP4-specific PRCM functions.
-obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
- cm44xx.o prcm_mpu44xx.o \
- prminst44xx.o vc44xx_data.o \
- vp44xx_data.o prm44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
- voltagedomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
- voltagedomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
- voltagedomains44xx_data.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
- powerdomain2xxx_3xxx.o \
- powerdomains2xxx_data.o \
- powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
- powerdomain2xxx_3xxx.o \
- powerdomains3xxx_data.o \
- powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
- powerdomain44xx.o \
- powerdomains44xx_data.o
+obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
+obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
+obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
+obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
# PRCM clockdomain control
-clockdomain-common += clockdomain.o \
- clockdomains_common_data.o
-obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) \
- clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o
+clockdomain-common += clockdomain.o
+clockdomain-common += clockdomains_common_data.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
+obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) \
- clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o \
- clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) \
- clockdomain44xx.o \
- clockdomains44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
+obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
+obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
- clkt2xxx_sys.o \
- clkt2xxx_dpllcore.o \
- clkt2xxx_virt_prcm_set.o \
- clkt2xxx_apll.o clkt2xxx_osc.o \
- clkt2xxx_dpll.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
- clock34xx.o clkt34xx_dpll3m2.o \
- clock3517.o clock36xx.o \
- dpll3xxx.o clock3xxx_data.o \
- clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
- dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
-obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \
- omap_hwmod_2xxx_3xxx_ipblock_data.o \
- omap_hwmod_2xxx_interconnect_data.o \
- omap_hwmod_2xxx_3xxx_interconnect_data.o \
- omap_hwmod_2420_data.o
-obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \
- omap_hwmod_2xxx_3xxx_ipblock_data.o \
- omap_hwmod_2xxx_interconnect_data.o \
- omap_hwmod_2xxx_3xxx_interconnect_data.o \
- omap_hwmod_2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \
- omap_hwmod_2xxx_3xxx_interconnect_data.o \
- omap_hwmod_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
@@ -208,23 +205,19 @@
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o
-obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
- sdram-nokia.o \
- board-rx51-peripherals.o \
- board-rx51-video.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
- board-zoom-peripherals.o \
- board-zoom-display.o \
- board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
- board-zoom-peripherals.o \
- board-zoom-display.o \
- board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
- board-zoom-peripherals.o \
- board-zoom-display.o
+obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o sdram-nokia.o
+obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
+obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
+obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o board-zoom-peripherals.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom-display.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o board-zoom-peripherals.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom-display.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o
+obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-peripherals.o
+obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index e658f83..99ca6ba 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -303,6 +303,7 @@
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
+ .init_late = omap2430_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 37abb0d..a98c688 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -605,6 +605,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_3430sdp_init,
+ .init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 6ef350d..2dc9ba5 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -217,6 +217,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_sdp_init,
+ .init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 94af6cd..8e17284 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -912,6 +912,7 @@
.init_irq = gic_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = omap_4430sdp_init,
+ .init_late = omap4430_init_late,
.timer = &omap4_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 3b8a53c..92432c2 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -102,6 +102,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_crane_init,
+ .init_late = am35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 99790eb..18f6010 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -385,6 +385,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_evm_init,
+ .init_late = am35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 768ece2..502c31e 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -356,6 +356,7 @@
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_apollon_init,
+ .init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c03df14..ded100c 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -669,6 +669,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t35_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -681,6 +682,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
+ .init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 9e66e16..a33ad46 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -303,6 +303,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
+ .init_late = am35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b063f0d..6567c1c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -644,6 +644,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = devkit8000_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 7302ba7..2029346 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -125,6 +125,7 @@
.init_irq = omap_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap4430_init_late,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
.restart = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0bbbabe..876becf 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -398,6 +398,7 @@
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
+ .init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7a27409..7491529 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -650,6 +650,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -662,6 +663,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 1b60495..ef9e829 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -442,6 +442,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_ldp_init,
+ .init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 518091c..8ca14e8 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -694,6 +694,7 @@
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
+ .init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -706,6 +707,7 @@
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
+ .init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -718,6 +720,7 @@
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
+ .init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 2a7b9a9..79c6909 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -543,6 +543,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
+ .init_late = omap3_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ace3c67..639bd07 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -671,6 +671,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_evm_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index c008bf8..932e177 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -242,6 +242,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -254,6 +255,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 33d995d..57aebee 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -622,6 +622,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3pandora_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 4396bae..b318f56 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -436,6 +436,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index ae2251f..485d14d 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -387,6 +387,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_touchbook_init,
+ .init_late = omap3430_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 68b8fc9..982fb26 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -521,6 +521,7 @@
.init_irq = gic_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
+ .init_late = omap4430_init_late,
.timer = &omap4_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 5527c19..8fa2fc3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -554,6 +554,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = overo_init,
+ .init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index ae53d71..0ad1bb3b 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -151,6 +151,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
+ .init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -163,6 +164,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
+ .init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 2da92a6..345dd93 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -127,6 +127,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = rx51_init,
+ .init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index ab9a7a9..d4c8392 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -52,6 +52,7 @@
.init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
+ .init_late = ti81xx_init_late,
.restart = omap_prcm_restart,
MACHINE_END
@@ -63,5 +64,6 @@
.init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
+ .init_late = ti81xx_init_late,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 5c20bcc..4e7e561 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -137,6 +137,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
+ .init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
@@ -149,6 +150,7 @@
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
+ .init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d6c9e61..be9dfd1 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -55,7 +55,7 @@
}
#endif
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
extern void omapti81xx_map_common_io(void);
#else
static inline void omapti81xx_map_common_io(void)
@@ -63,7 +63,7 @@
}
#endif
-#ifdef CONFIG_SOC_OMAPAM33XX
+#ifdef CONFIG_SOC_AM33XX
extern void omapam33xx_map_common_io(void);
#else
static inline void omapam33xx_map_common_io(void)
@@ -79,6 +79,42 @@
}
#endif
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
+int omap2_pm_init(void);
+#else
+static inline int omap2_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+int omap3_pm_init(void);
+#else
+static inline int omap3_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+int omap4_pm_init(void);
+#else
+static inline int omap4_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_OMAP_MUX
+int omap_mux_late_init(void);
+#else
+static inline int omap_mux_late_init(void)
+{
+ return 0;
+}
+#endif
+
extern void omap2_init_common_infrastructure(void);
extern struct sys_timer omap2_timer;
@@ -95,6 +131,17 @@
void am35xx_init_early(void);
void ti81xx_init_early(void);
void omap4430_init_early(void);
+void omap3_init_late(void); /* Do not use this one */
+void omap4430_init_late(void);
+void omap2420_init_late(void);
+void omap2430_init_late(void);
+void omap3430_init_late(void);
+void omap35xx_init_late(void);
+void omap3630_init_late(void);
+void am35xx_init_late(void);
+void ti81xx_init_late(void);
+void omap4430_init_late(void);
+int omap2_common_pm_late_init(void);
void omap_prcm_restart(char, const char *);
/*
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index ae62ece..7b4b932 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -645,7 +645,11 @@
void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
- char *name = "mmci-omap";
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ int id = 0;
+ char *oh_name = "msdi1";
+ char *dev_name = "mmci-omap";
if (!mmc_data[0]) {
pr_err("%s fails: Incomplete platform data\n", __func__);
@@ -653,8 +657,17 @@
}
omap242x_mmc_mux(mmc_data[0]);
- omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE,
- INT_24XX_MMC_IRQ, mmc_data[0]);
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return;
+ }
+ pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+ sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+ if (IS_ERR(pdev))
+ WARN(1, "Can'd build omap_device for %s:%s.\n",
+ dev_name, oh->name);
}
#endif
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index b19d849..ff75abe 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -227,10 +227,6 @@
dma_stride = OMAP2_DMA_STRIDE;
dma_common_ch_start = CSDP;
- if (cpu_is_omap3630() || cpu_is_omap44xx())
- dma_common_ch_end = CCDN;
- else
- dma_common_ch_end = CCFN;
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
if (!p) {
@@ -277,6 +273,13 @@
dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
return -ENOMEM;
}
+
+ /* Check the capabilities register for descriptor loading feature */
+ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
+ dma_common_ch_end = CCDN;
+ else
+ dma_common_ch_end = CCFN;
+
return 0;
}
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 3376388..845309f 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -28,8 +28,6 @@
#include <plat/dsp.h>
-extern phys_addr_t omap_dsp_get_mempool_base(void);
-
static struct platform_device *omap_dsp_pdev;
static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
@@ -47,6 +45,31 @@
.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
};
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+ phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+ phys_addr_t paddr;
+
+ if (!size)
+ return;
+
+ paddr = arm_memblock_steal(size, SZ_1M);
+ if (!paddr) {
+ pr_err("%s: failed to reserve %llx bytes\n",
+ __func__, (unsigned long long)size);
+ return;
+ }
+
+ omap_dsp_phys_mempool_base = paddr;
+}
+
+static phys_addr_t omap_dsp_get_mempool_base(void)
+{
+ return omap_dsp_phys_mempool_base;
+}
+
static int __init omap_dsp_init(void)
{
struct platform_device *pdev;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 580e684..46b09da 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -50,6 +50,19 @@
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
+/* GPMC ECC control settings */
+#define GPMC_ECC_CTRL_ECCCLEAR 0x100
+#define GPMC_ECC_CTRL_ECCDISABLE 0x000
+#define GPMC_ECC_CTRL_ECCREG1 0x001
+#define GPMC_ECC_CTRL_ECCREG2 0x002
+#define GPMC_ECC_CTRL_ECCREG3 0x003
+#define GPMC_ECC_CTRL_ECCREG4 0x004
+#define GPMC_ECC_CTRL_ECCREG5 0x005
+#define GPMC_ECC_CTRL_ECCREG6 0x006
+#define GPMC_ECC_CTRL_ECCREG7 0x007
+#define GPMC_ECC_CTRL_ECCREG8 0x008
+#define GPMC_ECC_CTRL_ECCREG9 0x009
+
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
@@ -860,8 +873,9 @@
gpmc_ecc_used = cs;
/* clear ecc and enable bits */
- val = ((0x00000001<<8) | 0x00000001);
- gpmc_write_reg(GPMC_ECC_CONTROL, val);
+ gpmc_write_reg(GPMC_ECC_CONTROL,
+ GPMC_ECC_CTRL_ECCCLEAR |
+ GPMC_ECC_CTRL_ECCREG1);
/* program ecc and result sizes */
val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
@@ -869,13 +883,15 @@
switch (mode) {
case GPMC_ECC_READ:
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+ case GPMC_ECC_WRITE:
+ gpmc_write_reg(GPMC_ECC_CONTROL,
+ GPMC_ECC_CTRL_ECCCLEAR |
+ GPMC_ECC_CTRL_ECCREG1);
break;
case GPMC_ECC_READSYN:
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
- break;
- case GPMC_ECC_WRITE:
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+ gpmc_write_reg(GPMC_ECC_CONTROL,
+ GPMC_ECC_CTRL_ECCCLEAR |
+ GPMC_ECC_CTRL_ECCDISABLE);
break;
default:
printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b0268ea..be697d4 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -355,7 +355,7 @@
*
* temporary HACK: ocr_mask instead of fixed supply
*/
- if (cpu_is_omap3505() || cpu_is_omap3517())
+ if (soc_is_am35xx())
mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
@@ -365,7 +365,7 @@
else
mmc->slots[0].ocr_mask = c->ocr_mask;
- if (!cpu_is_omap3517() && !cpu_is_omap3505())
+ if (!soc_is_am35xx())
mmc->slots[0].features |= HSMMC_HAS_PBIAS;
if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
@@ -388,7 +388,7 @@
}
}
- if (cpu_is_omap3517() || cpu_is_omap3505())
+ if (soc_is_am35xx())
mmc->slots[0].set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
@@ -400,7 +400,7 @@
}
break;
case 2:
- if (cpu_is_omap3517() || cpu_is_omap3505())
+ if (soc_is_am35xx())
mmc->slots[0].set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index f139817..0389b32 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -185,8 +185,7 @@
*/
if (cpu_is_omap3630()) {
cpu_name = "OMAP3630";
- } else if (cpu_is_omap3517()) {
- /* AM35xx devices */
+ } else if (soc_is_am35xx()) {
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
cpu_name = "TI816X";
@@ -352,13 +351,13 @@
*/
switch (rev) {
case 0:
- omap_revision = OMAP3517_REV_ES1_0;
+ omap_revision = AM35XX_REV_ES1_0;
cpu_rev = "1.0";
break;
case 1:
/* FALLTHROUGH */
default:
- omap_revision = OMAP3517_REV_ES1_1;
+ omap_revision = AM35XX_REV_ES1_1;
cpu_rev = "1.1";
}
break;
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
index d79321b..548de90b 100644
--- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
@@ -16,18 +16,10 @@
#define OMAP_WKG_ENB_B_0 0x14
#define OMAP_WKG_ENB_C_0 0x18
#define OMAP_WKG_ENB_D_0 0x1c
-#define OMAP_WKG_ENB_SECURE_A_0 0x20
-#define OMAP_WKG_ENB_SECURE_B_0 0x24
-#define OMAP_WKG_ENB_SECURE_C_0 0x28
-#define OMAP_WKG_ENB_SECURE_D_0 0x2c
#define OMAP_WKG_ENB_A_1 0x410
#define OMAP_WKG_ENB_B_1 0x414
#define OMAP_WKG_ENB_C_1 0x418
#define OMAP_WKG_ENB_D_1 0x41c
-#define OMAP_WKG_ENB_SECURE_A_1 0x420
-#define OMAP_WKG_ENB_SECURE_B_1 0x424
-#define OMAP_WKG_ENB_SECURE_C_1 0x428
-#define OMAP_WKG_ENB_SECURE_D_1 0x42c
#define OMAP_AUX_CORE_BOOT_0 0x800
#define OMAP_AUX_CORE_BOOT_1 0x804
#define OMAP_PTMSYNCREQ_MASK 0xc00
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4b9491a..8d014ba 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -173,7 +173,7 @@
};
#endif
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
static struct map_desc omapti81xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
@@ -184,7 +184,7 @@
};
#endif
-#ifdef CONFIG_SOC_OMAPAM33XX
+#ifdef CONFIG_SOC_AM33XX
static struct map_desc omapam33xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
@@ -216,41 +216,11 @@
.type = MT_DEVICE,
},
{
- .virtual = OMAP44XX_GPMC_VIRT,
- .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
- .length = OMAP44XX_GPMC_SIZE,
- .type = MT_DEVICE,
- },
- {
- .virtual = OMAP44XX_EMIF1_VIRT,
- .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
- .length = OMAP44XX_EMIF1_SIZE,
- .type = MT_DEVICE,
- },
- {
- .virtual = OMAP44XX_EMIF2_VIRT,
- .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
- .length = OMAP44XX_EMIF2_SIZE,
- .type = MT_DEVICE,
- },
- {
- .virtual = OMAP44XX_DMM_VIRT,
- .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
- .length = OMAP44XX_DMM_SIZE,
- .type = MT_DEVICE,
- },
- {
.virtual = L4_PER_44XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
.length = L4_PER_44XX_SIZE,
.type = MT_DEVICE,
},
- {
- .virtual = L4_EMU_44XX_VIRT,
- .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
- .length = L4_EMU_44XX_SIZE,
- .type = MT_DEVICE,
- },
#ifdef CONFIG_OMAP4_ERRATA_I688
{
.virtual = OMAP4_SRAM_VA,
@@ -286,14 +256,14 @@
}
#endif
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
void __init omapti81xx_map_common_io(void)
{
iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
-#ifdef CONFIG_SOC_OMAPAM33XX
+#ifdef CONFIG_SOC_AM33XX
void __init omapam33xx_map_common_io(void)
{
iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
@@ -380,6 +350,13 @@
omap_hwmod_init_postsetup();
omap2420_clk_init();
}
+
+void __init omap2420_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap2_pm_init();
+}
#endif
#ifdef CONFIG_SOC_OMAP2430
@@ -395,6 +372,13 @@
omap_hwmod_init_postsetup();
omap2430_clk_init();
}
+
+void __init omap2430_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap2_pm_init();
+}
#endif
/*
@@ -449,6 +433,48 @@
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
}
+
+void __init omap3_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap3_pm_init();
+}
+
+void __init omap3430_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap3_pm_init();
+}
+
+void __init omap35xx_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap3_pm_init();
+}
+
+void __init omap3630_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap3_pm_init();
+}
+
+void __init am35xx_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap3_pm_init();
+}
+
+void __init ti81xx_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap3_pm_init();
+}
#endif
#ifdef CONFIG_ARCH_OMAP4
@@ -465,6 +491,13 @@
omap_hwmod_init_postsetup();
omap4xxx_clk_init();
}
+
+void __init omap4430_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap4_pm_init();
+}
#endif
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
index 0812b15..80b8892 100644
--- a/arch/arm/mach-omap2/iomap.h
+++ b/arch/arm/mach-omap2/iomap.h
@@ -37,9 +37,6 @@
#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP4_GPMC_IO_OFFSET 0xa9000000
-#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
-
#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
@@ -170,28 +167,3 @@
#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_ABE_44XX_SIZE SZ_1M
-#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
- /* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_44XX_SIZE SZ_8M
-
-#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
- /* 0x50000000 --> 0xf9000000 */
-#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
-#define OMAP44XX_GPMC_SIZE SZ_1M
-
-
-#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE
- /* 0x4c000000 --> 0xfd100000 */
-#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP44XX_EMIF1_SIZE SZ_1M
-
-#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
- /* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_SIZE SZ_1M
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
-
-#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
- /* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_SIZE SZ_1M
-#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 1ecf545..fdc4303 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -231,7 +231,7 @@
goto out;
irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
if (irqnr)
goto out;
irqnr = readl_relaxed(base_addr + 0xf8);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 3268ee2..80e55c5 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -788,7 +788,7 @@
}
/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
-static int __init omap_mux_late_init(void)
+int __init omap_mux_late_init(void)
{
struct omap_mux_partition *partition;
int ret;
@@ -823,7 +823,6 @@
return 0;
}
-late_initcall(omap_mux_late_init);
static void __init omap_mux_package_fixup(struct omap_mux *p,
struct omap_mux *superset)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index fd48797..b26d3c9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3306,7 +3306,7 @@
rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
h = omap34xx_hwmod_ocp_ifs;
- } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
+ } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
h = am35xx_hwmod_ocp_ifs;
} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_2) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d0c1c96..9cb5cede 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -295,7 +295,7 @@
}
postcore_initcall(omap2_common_pm_init);
-static int __init omap2_common_pm_late_init(void)
+int __init omap2_common_pm_late_init(void)
{
/*
* In the case of DT, the PMIC and SR initialization will be done using
@@ -322,4 +322,3 @@
return 0;
}
-late_initcall(omap2_common_pm_late_init);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index facfffc..2edeffc 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -298,13 +298,10 @@
WKUP_MOD, PM_WKEN);
}
-static int __init omap2_pm_init(void)
+int __init omap2_pm_init(void)
{
u32 l;
- if (!cpu_is_omap24xx())
- return -ENODEV;
-
printk(KERN_INFO "Power Management for OMAP2 initializing\n");
l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
@@ -370,17 +367,13 @@
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
- if (cpu_is_omap24xx()) {
- omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
- omap24xx_idle_loop_suspend_sz);
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
- omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
- omap24xx_cpu_suspend_sz);
- }
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
arm_pm_idle = omap2_pm_idle;
return 0;
}
-
-late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 8b43aef..a34023d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -697,15 +697,12 @@
}
}
-static int __init omap3_pm_init(void)
+int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
struct clockdomain *neon_clkdm, *mpu_clkdm;
int ret;
- if (!cpu_is_omap34xx())
- return -ENODEV;
-
if (!omap3_has_io_chain_ctrl())
pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
@@ -804,5 +801,3 @@
err1:
return ret;
}
-
-late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 8856253..ea24174 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -141,15 +141,12 @@
* Initializes all powerdomain and clockdomain target states
* and all PRCM settings.
*/
-static int __init omap4_pm_init(void)
+int __init omap4_pm_init(void)
{
int ret;
struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
- if (!cpu_is_omap44xx())
- return -ENODEV;
-
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
return -ENODEV;
@@ -217,4 +214,3 @@
err2:
return ret;
}
-late_initcall(omap4_pm_init);
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index b7ea468..fb0a0a6 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -311,7 +311,7 @@
rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
- rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+ rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
else
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 1b78358..840929b 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -90,7 +90,7 @@
}
static struct irqaction omap2_gp_timer_irq = {
- .name = "gp timer",
+ .name = "gp_timer",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap2_gp_timer_interrupt,
};
@@ -132,7 +132,7 @@
}
static struct clock_event_device clockevent_gpt = {
- .name = "gp timer",
+ .name = "gp_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_next_event = omap2_gp_timer_set_next_event,
@@ -236,22 +236,8 @@
}
/* Clocksource code */
-
-#ifdef CONFIG_OMAP_32K_TIMER
-/*
- * When 32k-timer is enabled, don't use GPTimer for clocksource
- * instead, just leave default clocksource which uses the 32k
- * sync counter. See clocksource setup in plat-omap/counter_32k.c
- */
-
-static void __init omap2_gp_clocksource_init(int unused, const char *dummy)
-{
- omap_init_clocksource_32k();
-}
-
-#else
-
static struct omap_dm_timer clksrc;
+static bool use_gptimer_clksrc;
/*
* clocksource
@@ -262,7 +248,7 @@
}
static struct clocksource clocksource_gpt = {
- .name = "gp timer",
+ .name = "gp_timer",
.rating = 300,
.read = clocksource_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
@@ -278,7 +264,46 @@
}
/* Setup free-running counter for clocksource */
-static void __init omap2_gp_clocksource_init(int gptimer_id,
+static int __init omap2_sync32k_clocksource_init(void)
+{
+ int ret;
+ struct omap_hwmod *oh;
+ void __iomem *vbase;
+ const char *oh_name = "counter_32k";
+
+ /*
+ * First check hwmod data is available for sync32k counter
+ */
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh || oh->slaves_cnt == 0)
+ return -ENODEV;
+
+ omap_hwmod_setup_one(oh_name);
+
+ vbase = omap_hwmod_get_mpu_rt_va(oh);
+ if (!vbase) {
+ pr_warn("%s: failed to get counter_32k resource\n", __func__);
+ return -ENXIO;
+ }
+
+ ret = omap_hwmod_enable(oh);
+ if (ret) {
+ pr_warn("%s: failed to enable counter_32k module (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = omap_init_clocksource_32k(vbase);
+ if (ret) {
+ pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
+ __func__, ret);
+ omap_hwmod_idle(oh);
+ }
+
+ return ret;
+}
+
+static void __init omap2_gptimer_clocksource_init(int gptimer_id,
const char *fck_source)
{
int res;
@@ -286,9 +311,6 @@
res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
BUG_ON(res);
- pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
- gptimer_id, clksrc.rate);
-
__omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
@@ -296,15 +318,36 @@
if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
pr_err("Could not register clocksource %s\n",
clocksource_gpt.name);
+ else
+ pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
+ gptimer_id, clksrc.rate);
}
-#endif
+
+static void __init omap2_clocksource_init(int gptimer_id,
+ const char *fck_source)
+{
+ /*
+ * First give preference to kernel parameter configuration
+ * by user (clocksource="gp_timer").
+ *
+ * In case of missing kernel parameter for clocksource,
+ * first check for availability for 32k-sync timer, in case
+ * of failure in finding 32k_counter module or registering
+ * it as clocksource, execution will fallback to gp-timer.
+ */
+ if (use_gptimer_clksrc == true)
+ omap2_gptimer_clocksource_init(gptimer_id, fck_source);
+ else if (omap2_sync32k_clocksource_init())
+ /* Fall back to gp-timer code */
+ omap2_gptimer_clocksource_init(gptimer_id, fck_source);
+}
#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \
clksrc_nr, clksrc_src) \
static void __init omap##name##_timer_init(void) \
{ \
omap2_gp_clockevent_init((clkev_nr), clkev_src); \
- omap2_gp_clocksource_init((clksrc_nr), clksrc_src); \
+ omap2_clocksource_init((clksrc_nr), clksrc_src); \
}
#define OMAP_SYS_TIMER(name) \
@@ -335,7 +378,7 @@
static void __init omap4_timer_init(void)
{
omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
- omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
+ omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
#ifdef CONFIG_LOCAL_TIMERS
/* Local timers are not supprted on OMAP4430 ES1.0 */
if (omap_rev() != OMAP4430_REV_ES1_0) {
@@ -503,3 +546,28 @@
return 0;
}
arch_initcall(omap2_dm_timer_init);
+
+/**
+ * omap2_override_clocksource - clocksource override with user configuration
+ *
+ * Allows user to override default clocksource, using kernel parameter
+ * clocksource="gp_timer" (For all OMAP2PLUS architectures)
+ *
+ * Note that, here we are using same standard kernel parameter "clocksource=",
+ * and not introducing any OMAP specific interface.
+ */
+static int __init omap2_override_clocksource(char *str)
+{
+ if (!str)
+ return 0;
+ /*
+ * For OMAP architecture, we only have two options
+ * - sync_32k (default)
+ * - gp_timer (sys_clk based)
+ */
+ if (!strcmp(str, "gp_timer"))
+ use_gptimer_clksrc = true;
+
+ return 0;
+}
+early_param("clocksource", omap2_override_clocksource);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 8d5ed77..b19d1b4 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -90,7 +90,7 @@
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (cpu_is_omap3517() || cpu_is_omap3505()) {
+ if (soc_is_am35xx()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
} else if (cpu_is_ti81xx()) {
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index 57db203..d0103c8 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -118,7 +118,7 @@
}
#endif
- if (cpu_is_omap3517() || cpu_is_omap3505())
+ if (soc_is_am35xx())
voltdms = voltagedomains_am35xx;
else
voltdms = voltagedomains_omap3;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index e2e9db4..9148b22 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/delay.h>
+#include <linux/clk-provider.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/setup.h>
@@ -70,6 +71,19 @@
/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+ tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+ orion5x_tclk);
+
+ orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
* EHCI0
****************************************************************************/
void __init orion5x_ehci0_init(void)
@@ -95,7 +109,7 @@
{
orion_ge00_init(eth_data,
ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
- IRQ_ORION5X_ETH_ERR, orion5x_tclk);
+ IRQ_ORION5X_ETH_ERR);
}
@@ -132,7 +146,7 @@
****************************************************************************/
void __init orion5x_spi_init()
{
- orion_spi_init(SPI_PHYS_BASE, orion5x_tclk);
+ orion_spi_init(SPI_PHYS_BASE);
}
@@ -142,7 +156,7 @@
void __init orion5x_uart0_init(void)
{
orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_ORION5X_UART0, orion5x_tclk);
+ IRQ_ORION5X_UART0, tclk);
}
/*****************************************************************************
@@ -151,7 +165,7 @@
void __init orion5x_uart1_init(void)
{
orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_ORION5X_UART1, orion5x_tclk);
+ IRQ_ORION5X_UART1, tclk);
}
/*****************************************************************************
@@ -179,7 +193,7 @@
****************************************************************************/
void __init orion5x_wdt_init(void)
{
- orion_wdt_init(orion5x_tclk);
+ orion_wdt_init();
}
@@ -276,6 +290,9 @@
*/
orion5x_setup_cpu_mbus_bridge();
+ /* Setup root of clk tree */
+ clk_init();
+
/*
* Don't issue "Wait for Interrupt" instruction if we are
* running on D0 5281 silicon.
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index e91bf0b..92df49c 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -16,7 +16,6 @@
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/spi/flash.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index be4c928..a00d2f1 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -265,6 +265,17 @@
soft_restart(0);
}
+#ifdef CONFIG_PM
+extern int pnx4008_pm_init(void);
+#else
+static inline int pnx4008_pm_init(void) { return 0; }
+#endif
+
+void __init pnx4008_init_late(void)
+{
+ pnx4008_pm_init();
+}
+
extern struct sys_timer pnx4008_timer;
MACHINE_START(PNX4008, "Philips PNX4008")
@@ -273,6 +284,7 @@
.map_io = pnx4008_map_io,
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
+ .init_late = pnx4008_init_late,
.timer = &pnx4008_timer,
.restart = pnx4008_restart,
MACHINE_END
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index f3e60a0..26f8d06 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -124,7 +124,7 @@
.valid = pnx4008_pm_valid,
};
-static int __init pnx4008_pm_init(void)
+int __init pnx4008_pm_init(void)
{
u32 sram_size_to_allocate;
@@ -151,5 +151,3 @@
suspend_set_ops(&pnx4008_pm_ops);
return 0;
}
-
-late_initcall(pnx4008_pm_init);
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index b28a930..60d826f 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -24,4 +24,10 @@
extern void __init sirfsoc_map_lluart(void);
#endif
+#ifdef CONFIG_SUSPEND
+extern int sirfsoc_pm_init(void);
+#else
+static inline int sirfsoc_pm_init(void) { return 0; }
+#endif
+
#endif
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 26ebb57..fb5a791 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -85,12 +85,11 @@
.valid = suspend_valid_only_mem,
};
-static int __init sirfsoc_pm_init(void)
+int __init sirfsoc_pm_init(void)
{
suspend_set_ops(&sirfsoc_pm_ops);
return 0;
}
-late_initcall(sirfsoc_pm_init);
static const struct of_device_id pwrc_ids[] = {
{ .compatible = "sirf,prima2-pwrc" },
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index 02b9c05..8f0429d 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -25,6 +25,11 @@
of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
}
+void __init sirfsoc_init_late(void)
+{
+ sirfsoc_pm_init();
+}
+
static const char *prima2cb_dt_match[] __initdata = {
"sirf,prima2-cb",
NULL
@@ -39,6 +44,7 @@
.timer = &sirfsoc_timer,
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
+ .init_late = sirfsoc_init_late,
.dt_compat = prima2cb_dt_match,
.restart = sirfsoc_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index b34287a..e249611 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -518,6 +518,11 @@
help
Internal config node for S3C2443 DMA support
+config S3C2443_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 3518fe81..0ab6ab1 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,6 +14,8 @@
# core
+obj-y += common.o
+
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
@@ -33,6 +35,10 @@
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
+# PM
+
+obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o
+
# common code
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
@@ -91,5 +97,6 @@
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4..8702ecf 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
};
void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac3..a4c5a52 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,11 @@
&clk_hsmmc,
};
+static struct clk_lookup s3c2443_clk_lookup[] = {
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+};
+
void __init s3c2443_init_clocks(int xtal)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +215,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 4604315..aeeb2be 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIS,
}, {
- .name = "hsspi",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_HSSPI,
- }, {
.name = "adc",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@
.ctrlbit = S3C2443_HCLKCON_HSMMC,
};
+static struct clk hsspi_clk = {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_HSSPI,
+};
+
/* EPLLCON compatible enough to get on/off information */
void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@
&clk_usb_bus,
&clk_armdiv,
&hsmmc1_clk,
+ &hsspi_clk,
};
static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/mach-s3c24xx/common.c
similarity index 76%
rename from arch/arm/plat-s3c24xx/cpu.c
rename to arch/arm/mach-s3c24xx/common.c
index 290942d..56cdd34 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -4,7 +4,7 @@
* http://www.simtec.co.uk/products/SWLINUX/
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX CPU Support
+ * Common code for S3C24XX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,6 +41,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
@@ -52,6 +53,8 @@
#include <plat/s3c2416.h>
#include <plat/s3c244x.h>
#include <plat/s3c2443.h>
+#include <plat/cpu-freq.h>
+#include <plat/pll.h>
/* table of supported CPUs */
@@ -234,3 +237,67 @@
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
+ IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
+ IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
+ IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
+ IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c2410_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c2410_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c2410_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
+ },
+ [3] = {
+ .resources = s3c2410_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
+ },
+};
+
+/* initialise all the clocks */
+
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk)
+{
+ clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+ clk_xtal.rate);
+
+ clk_mpll.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+ clk_f.rate = fclk;
+}
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c47..2d94228 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@
.name = "sdi",
.channels = MAP(S3C2443_DMAREQSEL_SDI),
},
- [DMACH_SPI0] = {
- .name = "spi0",
+ [DMACH_SPI0_RX] = {
+ .name = "spi0-rx",
+ .channels = MAP(S3C2443_DMAREQSEL_SPI0RX),
+ },
+ [DMACH_SPI0_TX] = {
+ .name = "spi0-tx",
.channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
},
- [DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
- .name = "spi1",
+ [DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+ .name = "spi1-rx",
+ .channels = MAP(S3C2443_DMAREQSEL_SPI1RX),
+ },
+ [DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+ .name = "spi1-tx",
.channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
},
[DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfec..454831b 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@
DMACH_UART2_SRC2,
DMACH_UART3, /* s3c2443 has extra uart */
DMACH_UART3_SRC2,
+ DMACH_SPI0_TX, /* s3c2443/2416/2450 hsspi0 */
+ DMACH_SPI0_RX, /* s3c2443/2416/2450 hsspi0 */
+ DMACH_SPI1_TX, /* s3c2443/2450 hsspi1 */
+ DMACH_SPI1_RX, /* s3c2443/2450 hsspi1 */
DMACH_MAX, /* the end entry */
};
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807..8ba381f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
/* SPI */
#define S3C2410_PA_SPI (0x59000000)
+#define S3C2443_PA_SPI0 (0x52000000)
+#define S3C2443_PA_SPI1 S3C2410_PA_SPI
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
@@ -162,4 +164,7 @@
#define S3C_PA_WDT S3C2410_PA_WATCHDOG
#define S3C_PA_NAND S3C24XX_PA_NAND
+#define S3C_PA_SPI0 S3C2443_PA_SPI0
+#define S3C_PA_SPI1 S3C2443_PA_SPI1
+
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/irq-pm.c
rename to arch/arm/mach-s3c24xx/irq-pm.c
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/pm.c
rename to arch/arm/mach-s3c24xx/pm.c
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 0000000..5712c85
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+ .high_speed = 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+ /* enable hsspi bit in misccr */
+ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+ s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
similarity index 100%
rename from arch/arm/plat-s3c24xx/sleep.S
rename to arch/arm/mach-s3c24xx/sleep.S
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index b313380..be746e3 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -384,3 +384,8 @@
/* if all else fails, or mode was for soft, jump to 0 */
soft_restart(0);
}
+
+void __init s3c64xx_init_late(void)
+{
+ s3c64xx_pm_late_initcall();
+}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index 7a10be6..6cfc99b 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -24,6 +24,7 @@
void s3c64xx_setup_clocks(void);
void s3c64xx_restart(char mode, const char *cmd);
+void s3c64xx_init_late(void);
#ifdef CONFIG_CPU_S3C6400
@@ -51,4 +52,10 @@
#define s3c6410_init NULL
#endif
+#ifdef CONFIG_PM
+int __init s3c64xx_pm_late_initcall(void);
+#else
+static inline int s3c64xx_pm_late_initcall(void) { return 0; }
+#endif
+
#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index f252691..314df05 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -230,6 +230,7 @@
.handle_irq = vic_handle_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index aa1137f..eda5e02 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -813,6 +813,7 @@
.handle_irq = vic_handle_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 521e07b..1bf6b9d 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -272,6 +272,7 @@
.handle_irq = vic_handle_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index b2166d4..f8ea61ea 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -339,6 +339,7 @@
.handle_irq = vic_handle_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 0efa2ba..cad2e05 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -104,6 +104,7 @@
.handle_irq = vic_handle_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 5c08266..b92d8e1 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -320,6 +320,7 @@
.handle_irq = vic_handle_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 3f42431..c5021d0 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -152,6 +152,7 @@
.handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index e5c09b6..aa9072a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -168,6 +168,7 @@
.handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 5f09653..b0f4525 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -93,6 +93,7 @@
.handle_irq = vic_handle_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 7da044f..d44319b 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -702,6 +702,7 @@
.handle_irq = vic_handle_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
+ .init_late = s3c64xx_init_late,
.timer = &s3c24xx_timer,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 7d3e81b..7feb426 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -365,10 +365,9 @@
}
arch_initcall(s3c64xx_pm_initcall);
-static __init int s3c64xx_pm_late_initcall(void)
+int __init s3c64xx_pm_late_initcall(void)
{
pm_genpd_poweroff_unused();
return 0;
}
-late_initcall(s3c64xx_pm_late_initcall);
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 375d3f7..d1dc7f1 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -538,6 +538,7 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = assabet_init,
+ .init_late = sa11x0_init_late,
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index e0f0c03..b30fb99 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -305,6 +305,7 @@
.map_io = badge4_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
+ .init_late = sa11x0_init_late,
.timer = &sa1100_timer,
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 4a61f60..09d7f4b 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -134,5 +134,6 @@
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index c7f418b..ea5cff3 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -401,5 +401,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 16be4c5..9db3e98 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -359,6 +359,10 @@
arch_initcall(sa1100_init);
+void __init sa11x0_init_late(void)
+{
+ sa11x0_pm_init();
+}
/*
* Common I/O mapping:
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 9eb3b3c..a5b7c13 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -11,6 +11,7 @@
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_gpio(void);
extern void sa11x0_restart(char, const char *);
+extern void sa11x0_init_late(void);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
@@ -41,3 +42,9 @@
struct sa1100fb_mach_info;
void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
+
+#ifdef CONFIG_PM
+int sa11x0_pm_init(void);
+#else
+static inline int sa11x0_pm_init(void) { return 0; }
+#endif
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b2e8d0f..e1571ea 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -110,6 +110,7 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3100_mach_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index cb6659f..ba7a290 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -160,6 +160,7 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3600_mach_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 5535475..7f86bd9 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -199,5 +199,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = hackkit_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index ca7a7e8..e3084f4 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -348,6 +348,7 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = jornada720_mach_init,
+ .init_late = sa11x0_init_late,
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index eb6534e..b775a0a 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -147,6 +147,7 @@
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
+ .init_late = sa11x0_init_late,
.timer = &sa1100_timer,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 8f6446b..41f69d9 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -112,5 +112,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 1602575..37fe0a0 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -135,5 +135,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = pleb_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 2fa499e..690cf0c 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -117,10 +117,8 @@
.valid = suspend_valid_only_mem,
};
-static int __init sa11x0_pm_init(void)
+int __init sa11x0_pm_init(void)
{
suspend_set_ops(&sa11x0_pm_ops);
return 0;
}
-
-late_initcall(sa11x0_pm_init);
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index ca8bf59..5d33fc3 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -104,5 +104,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
+ .init_late = sa11x0_init_late,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 3efae03..fbd5359 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -395,6 +395,7 @@
.map_io = simpad_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
+ .init_late = sa11x0_init_late,
.timer = &sa1100_timer,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index e6b177b..8aa1962 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
#
# Common objects
-obj-y := timer.o console.o clock.o
+obj-y := timer.o console.o clock.o common.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 0891ec6..5a6f22f 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -580,5 +580,6 @@
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = ag5evm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index b540b8e..ace6024 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1469,5 +1469,6 @@
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = ap4evb_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 63ab706..e9b32cf 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -500,5 +500,6 @@
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = bonito_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 39b6cf8..796fa00 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -338,5 +338,6 @@
.init_irq = sh7367_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = g3evm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 0e5a39c..f125732 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -381,5 +381,6 @@
.init_irq = sh7377_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = g4evm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 200dcd4..f60f1b2 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -521,5 +521,6 @@
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kota2_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 50c67b2..b577f7c 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1638,5 +1638,6 @@
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = mackerel_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index ef0e13b..14de378 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -98,5 +98,6 @@
.init_irq = r8a7779_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = marzen_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/common.c b/arch/arm/mach-shmobile/common.c
new file mode 100644
index 0000000..608aba9
--- /dev/null
+++ b/arch/arm/mach-shmobile/common.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/common.h>
+
+void __init shmobile_init_late(void)
+{
+ shmobile_suspend_init();
+ shmobile_cpuidle_init();
+}
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 7e65591..7b541e91 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -46,7 +46,7 @@
void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
-static int shmobile_cpuidle_init(void)
+int shmobile_cpuidle_init(void)
{
struct cpuidle_device *dev = &shmobile_cpuidle_dev;
struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
@@ -65,4 +65,3 @@
return 0;
}
-late_initcall(shmobile_cpuidle_init);
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index ff5f12f..01e2bc0 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -85,4 +85,18 @@
extern void r8a7779_smp_prepare_cpus(void);
extern void r8a7779_register_twd(void);
+extern void shmobile_init_late(void);
+
+#ifdef CONFIG_SUSPEND
+int shmobile_suspend_init(void);
+#else
+static inline int shmobile_suspend_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_IDLE
+int shmobile_cpuidle_init(void);
+#else
+static inline int shmobile_cpuidle_init(void) { return 0; }
+#endif
+
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c
index 4d1b86a..47d83f7 100644
--- a/arch/arm/mach-shmobile/suspend.c
+++ b/arch/arm/mach-shmobile/suspend.c
@@ -39,9 +39,8 @@
.valid = suspend_valid_only_mem,
};
-static int __init shmobile_suspend_init(void)
+int __init shmobile_suspend_init(void)
{
suspend_set_ops(&shmobile_suspend_ops);
return 0;
}
-late_initcall(shmobile_suspend_init);
diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig
new file mode 100644
index 0000000..eaadc66
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Kconfig
@@ -0,0 +1,20 @@
+#
+# SPEAr13XX Machine configuration file
+#
+
+if ARCH_SPEAR13XX
+
+menu "SPEAr13xx Implementations"
+config MACH_SPEAR1310
+ bool "SPEAr1310 Machine support with Device Tree"
+ select PINCTRL_SPEAR1310
+ help
+ Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+ bool "SPEAr1340 Machine support with Device Tree"
+ select PINCTRL_SPEAR1340
+ help
+ Supports ST SPEAr1340 machine configured via the device-tree
+endmenu
+endif #ARCH_SPEAR13XX
diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile
new file mode 100644
index 0000000..3435ea7
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for SPEAr13XX machine series
+#
+
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
new file mode 100644
index 0000000..403efd7
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -0,0 +1,6 @@
+zreladdr-y += 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb
diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear13xx/headsmp.S
new file mode 100644
index 0000000..ed85473a
--- /dev/null
+++ b/arch/arm/mach-spear13xx/headsmp.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /* re-enable coherency */
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #(1 << 6) | (1 << 0)
+ mcr p15, 0, r0, c1, c0, 1
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+ .align
+1: .long .
+ .long pen_release
+ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
new file mode 100644
index 0000000..5c6867b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ " mcr p15, 0, %1, c7, c5, 0\n"
+ " dsb\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C)
+ : "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C)
+ : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+ for (;;) {
+ wfi();
+
+ if (pen_release == cpu) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * Getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * Just note it happening - when we're woken, we can report
+ * its occurrence.
+ */
+ (*spurious)++;
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __cpuinit platform_cpu_die(unsigned int cpu)
+{
+ int spurious = 0;
+
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu, &spurious);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+
+ if (spurious)
+ pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..ea15646
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
new file mode 100644
index 0000000..383ab04
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/dma.h
+ *
+ * DMA information for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* request id of all the peripherals */
+enum dma_master_info {
+ /* Accessible from only one master */
+ DMA_MASTER_MCIF = 0,
+ DMA_MASTER_FSMC = 1,
+ /* Accessible from both 0 & 1 */
+ DMA_MASTER_MEMORY = 0,
+ DMA_MASTER_ADC = 0,
+ DMA_MASTER_UART0 = 0,
+ DMA_MASTER_SSP0 = 0,
+ DMA_MASTER_I2C0 = 0,
+
+#ifdef CONFIG_MACH_SPEAR1310
+ /* Accessible from only one master */
+ SPEAR1310_DMA_MASTER_JPEG = 1,
+
+ /* Accessible from both 0 & 1 */
+ SPEAR1310_DMA_MASTER_I2S = 0,
+ SPEAR1310_DMA_MASTER_UART1 = 0,
+ SPEAR1310_DMA_MASTER_UART2 = 0,
+ SPEAR1310_DMA_MASTER_UART3 = 0,
+ SPEAR1310_DMA_MASTER_UART4 = 0,
+ SPEAR1310_DMA_MASTER_UART5 = 0,
+ SPEAR1310_DMA_MASTER_I2C1 = 0,
+ SPEAR1310_DMA_MASTER_I2C2 = 0,
+ SPEAR1310_DMA_MASTER_I2C3 = 0,
+ SPEAR1310_DMA_MASTER_I2C4 = 0,
+ SPEAR1310_DMA_MASTER_I2C5 = 0,
+ SPEAR1310_DMA_MASTER_I2C6 = 0,
+ SPEAR1310_DMA_MASTER_I2C7 = 0,
+ SPEAR1310_DMA_MASTER_SSP1 = 0,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+ /* Accessible from only one master */
+ SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
+ SPEAR1340_DMA_MASTER_I2S_REC = 1,
+ SPEAR1340_DMA_MASTER_I2C1 = 1,
+ SPEAR1340_DMA_MASTER_UART1 = 1,
+
+ /* following are accessible from both master 0 & 1 */
+ SPEAR1340_DMA_MASTER_SPDIF = 0,
+ SPEAR1340_DMA_MASTER_CAM = 1,
+ SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
+ SPEAR1340_DMA_MASTER_MALI = 0,
+#endif
+};
+
+enum request_id {
+ DMA_REQ_ADC = 0,
+ DMA_REQ_SSP0_TX = 4,
+ DMA_REQ_SSP0_RX = 5,
+ DMA_REQ_UART0_TX = 6,
+ DMA_REQ_UART0_RX = 7,
+ DMA_REQ_I2C0_TX = 8,
+ DMA_REQ_I2C0_RX = 9,
+
+#ifdef CONFIG_MACH_SPEAR1310
+ SPEAR1310_DMA_REQ_FROM_JPEG = 2,
+ SPEAR1310_DMA_REQ_TO_JPEG = 3,
+ SPEAR1310_DMA_REQ_I2S_TX = 10,
+ SPEAR1310_DMA_REQ_I2S_RX = 11,
+
+ SPEAR1310_DMA_REQ_I2C1_RX = 0,
+ SPEAR1310_DMA_REQ_I2C1_TX = 1,
+ SPEAR1310_DMA_REQ_I2C2_RX = 2,
+ SPEAR1310_DMA_REQ_I2C2_TX = 3,
+ SPEAR1310_DMA_REQ_I2C3_RX = 4,
+ SPEAR1310_DMA_REQ_I2C3_TX = 5,
+ SPEAR1310_DMA_REQ_I2C4_RX = 6,
+ SPEAR1310_DMA_REQ_I2C4_TX = 7,
+ SPEAR1310_DMA_REQ_I2C5_RX = 8,
+ SPEAR1310_DMA_REQ_I2C5_TX = 9,
+ SPEAR1310_DMA_REQ_I2C6_RX = 10,
+ SPEAR1310_DMA_REQ_I2C6_TX = 11,
+ SPEAR1310_DMA_REQ_UART1_RX = 12,
+ SPEAR1310_DMA_REQ_UART1_TX = 13,
+ SPEAR1310_DMA_REQ_UART2_RX = 14,
+ SPEAR1310_DMA_REQ_UART2_TX = 15,
+ SPEAR1310_DMA_REQ_UART5_RX = 16,
+ SPEAR1310_DMA_REQ_UART5_TX = 17,
+ SPEAR1310_DMA_REQ_SSP1_RX = 18,
+ SPEAR1310_DMA_REQ_SSP1_TX = 19,
+ SPEAR1310_DMA_REQ_I2C7_RX = 20,
+ SPEAR1310_DMA_REQ_I2C7_TX = 21,
+ SPEAR1310_DMA_REQ_UART3_RX = 28,
+ SPEAR1310_DMA_REQ_UART3_TX = 29,
+ SPEAR1310_DMA_REQ_UART4_RX = 30,
+ SPEAR1310_DMA_REQ_UART4_TX = 31,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+ SPEAR1340_DMA_REQ_SPDIF_TX = 2,
+ SPEAR1340_DMA_REQ_SPDIF_RX = 3,
+ SPEAR1340_DMA_REQ_I2S_TX = 10,
+ SPEAR1340_DMA_REQ_I2S_RX = 11,
+ SPEAR1340_DMA_REQ_UART1_TX = 12,
+ SPEAR1340_DMA_REQ_UART1_RX = 13,
+ SPEAR1340_DMA_REQ_I2C1_TX = 14,
+ SPEAR1340_DMA_REQ_I2C1_RX = 15,
+ SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
+ SPEAR1340_DMA_REQ_CAM0_ODD = 1,
+ SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
+ SPEAR1340_DMA_REQ_CAM1_ODD = 3,
+ SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
+ SPEAR1340_DMA_REQ_CAM2_ODD = 5,
+ SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
+ SPEAR1340_DMA_REQ_CAM3_ODD = 7,
+#endif
+};
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
new file mode 100644
index 0000000..6d8c45b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/generic.h
+ *
+ * spear13xx machine family generic header file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <asm/mach/time.h>
+
+/* Add spear13xx structure declarations here */
+extern struct sys_timer spear13xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+
+/* Add spear13xx family function declarations here */
+void __init spear_setup_of_timer(void);
+void __init spear13xx_map_io(void);
+void __init spear13xx_dt_init_irq(void);
+void __init spear13xx_l2x0_init(void);
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+void spear_restart(char, const char *);
+void spear13xx_secondary_startup(void);
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void);
+#else
+static inline void spear1310_clk_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void);
+#else
+static inline void spear1340_clk_init(void) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
new file mode 100644
index 0000000..cd6f4f8
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/hardware.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
new file mode 100644
index 0000000..f542a24
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_GIC_END 160
+#define NR_IRQS IRQ_GIC_END
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
new file mode 100644
index 0000000..30c57ef
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/spear.h
+ *
+ * spear13xx Machine family specific definition
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR13XX_H
+#define __MACH_SPEAR13XX_H
+
+#include <asm/memory.h>
+
+#define PERIP_GRP2_BASE UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE UL(0xFE000000)
+#define MCIF_SDHCI_BASE UL(0xB3000000)
+#define SYSRAM0_BASE UL(0xB3800000)
+#define VA_SYSRAM0_BASE UL(0xFE800000)
+#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE UL(0xFD000000)
+#define UART_BASE UL(0xE0000000)
+#define VA_UART_BASE UL(0xFD000000)
+#define SSP_BASE UL(0xE0100000)
+#define MISC_BASE UL(0xE0700000)
+#define VA_MISC_BASE IOMEM(UL(0xFD700000))
+
+#define A9SM_AND_MPMC_BASE UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE UL(0xFC000000)
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE UL(0xFC800000)
+#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE UL(0xED000000)
+#define VA_L2CC_BASE IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE UL(0xEA800000)
+#define DMAC1_BASE UL(0xEB000000)
+#define MCIF_CF_BASE UL(0xB2800000)
+
+/* Devices present in SPEAr1310 */
+#ifdef CONFIG_MACH_SPEAR1310
+#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000)
+#define SPEAR1310_RAS_BASE UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000))
+#endif /* CONFIG_MACH_SPEAR1310 */
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE UART_BASE
+#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE
+
+#endif /* __MACH_SPEAR13XX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
new file mode 100644
index 0000000..31af3e8
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
new file mode 100644
index 0000000..c784089
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
new file mode 100644
index 0000000..f5d07f2
--- /dev/null
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+extern void spear13xx_secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+ smp_wmb();
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ pen_release = cpu;
+ flush_cache_all();
+ outer_flush_all();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores = scu_get_core_count(scu_base);
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+ scu_enable(scu_base);
+
+ /*
+ * Write the address of secondary startup into the system-wide location
+ * (presently it is in SRAM). The BootMonitor waits until it receives a
+ * soft interrupt, and then the secondary CPU branches to this address.
+ */
+ __raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
new file mode 100644
index 0000000..fefd15b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_SSP1_BASE UL(0x5D400000)
+#define SPEAR1310_SATA0_BASE UL(0xB1000000)
+#define SPEAR1310_SATA1_BASE UL(0xB1800000)
+#define SPEAR1310_SATA2_BASE UL(0xB4000000)
+
+/* ssp device registration */
+static struct pl022_ssp_controller ssp1_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 3,
+};
+
+/* Add SPEAr1310 auxdata to pass platform data */
+static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+ OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+ OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
+ {}
+};
+
+static void __init spear1310_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear1310_auxdata_lookup, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+ "st,spear1310",
+ "st,spear1310-evb",
+ NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xD8000000 0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR1310_RAS_GRP1_BASE,
+ .pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init spear1310_map_io(void)
+{
+ iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+ spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+ .map_io = spear1310_map_io,
+ .init_irq = spear13xx_dt_init_irq,
+ .handle_irq = gic_handle_irq,
+ .timer = &spear13xx_timer,
+ .init_machine = spear1310_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear1310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
new file mode 100644
index 0000000..ee38cbc
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/ahci_platform.h>
+#include <linux/amba/serial.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1340_SATA_BASE UL(0xB1000000)
+#define SPEAR1340_UART1_BASE UL(0xB4100000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
+ /* PCIE CFG MASks */
+ #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
+ #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
+ #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
+ #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
+ #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
+ #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
+ #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
+ #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
+ #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
+ #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
+ #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
+ #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
+ SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+ SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+ SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+ SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+ #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
+ SPEAR1340_SATA_CFG_PM_CLK_EN | \
+ SPEAR1340_SATA_CFG_POWERUP_RESET | \
+ SPEAR1340_SATA_CFG_RX_CLK_EN | \
+ SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
+ #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
+ #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static struct dw_dma_slave uart1_dma_param[] = {
+ {
+ /* Tx */
+ .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+ .cfg_lo = 0,
+ .src_master = DMA_MASTER_MEMORY,
+ .dst_master = SPEAR1340_DMA_MASTER_UART1,
+ }, {
+ /* Rx */
+ .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+ .cfg_lo = 0,
+ .src_master = SPEAR1340_DMA_MASTER_UART1,
+ .dst_master = DMA_MASTER_MEMORY,
+ }
+};
+
+static struct amba_pl011_data uart1_data = {
+ .dma_filter = dw_dma_filter,
+ .dma_tx_param = &uart1_dma_param[0],
+ .dma_rx_param = &uart1_dma_param[1],
+};
+
+/* SATA device registration */
+static int sata_miphy_init(struct device *dev, void __iomem *addr)
+{
+ writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+ writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+ SPEAR1340_PCIE_MIPHY_CFG);
+ /* Switch on sata power domain */
+ writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
+ msleep(20);
+ /* Disable PCIE SATA Controller reset */
+ writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
+ SPEAR1340_PERIP1_SW_RST);
+ msleep(20);
+
+ return 0;
+}
+
+void sata_miphy_exit(struct device *dev)
+{
+ writel(0, SPEAR1340_PCIE_SATA_CFG);
+ writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+ /* Enable PCIE SATA Controller reset */
+ writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
+ SPEAR1340_PERIP1_SW_RST);
+ msleep(20);
+ /* Switch off sata power domain */
+ writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
+ msleep(20);
+}
+
+int sata_suspend(struct device *dev)
+{
+ if (dev->power.power_state.event == PM_EVENT_FREEZE)
+ return 0;
+
+ sata_miphy_exit(dev);
+
+ return 0;
+}
+
+int sata_resume(struct device *dev)
+{
+ if (dev->power.power_state.event == PM_EVENT_THAW)
+ return 0;
+
+ return sata_miphy_init(dev, NULL);
+}
+
+static struct ahci_platform_data sata_pdata = {
+ .init = sata_miphy_init,
+ .exit = sata_miphy_exit,
+ .suspend = sata_suspend,
+ .resume = sata_resume,
+};
+
+/* Add SPEAr1340 auxdata to pass platform data */
+static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+ OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+ OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
+ &sata_pdata),
+ OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
+ {}
+};
+
+static void __init spear1340_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ spear1340_auxdata_lookup, NULL);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+ "st,spear1340",
+ "st,spear1340-evb",
+ NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+ .map_io = spear13xx_map_io,
+ .init_irq = spear13xx_dt_init_irq,
+ .handle_irq = gic_handle_irq,
+ .timer = &spear13xx_timer,
+ .init_machine = spear1340_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear1340_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
new file mode 100644
index 0000000..50b349a
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/dw_dmac.h>
+#include <linux/err.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/smp_twd.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+ struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+ if (chan->device->dev == dws->dma_dev) {
+ chan->private = slave;
+ return true;
+ } else {
+ return false;
+ }
+}
+
+/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+ {
+ /* Tx */
+ .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+ .cfg_lo = 0,
+ .src_master = DMA_MASTER_MEMORY,
+ .dst_master = DMA_MASTER_SSP0,
+ }, {
+ /* Rx */
+ .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+ .cfg_lo = 0,
+ .src_master = DMA_MASTER_SSP0,
+ .dst_master = DMA_MASTER_MEMORY,
+ }
+};
+
+struct pl022_ssp_controller pl022_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 1,
+ .dma_filter = dw_dma_filter,
+ .dma_rx_param = &ssp_dma_param[1],
+ .dma_tx_param = &ssp_dma_param[0],
+ .num_chipselect = 3,
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+ .cfg_hi = 0,
+ .cfg_lo = 0,
+ .src_master = 0,
+ .dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+ .nr_channels = 8,
+ .chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+ .chan_priority = CHAN_PRIORITY_DESCENDING,
+};
+
+void __init spear13xx_l2x0_init(void)
+{
+ /*
+ * 512KB (64KB/way), 8-way associativity, parity supported
+ *
+ * FIXME: 9th bit, of Auxillary Controller register must be set
+ * for some spear13xx devices for stable L2 operation.
+ *
+ * Enable Early BRESP, L2 prefetch for Instruction and Data,
+ * write alloc and 'Full line of zero' options
+ *
+ */
+
+ writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+
+ /*
+ * Program following latencies in order to make
+ * SPEAr1340 work at 600 MHz
+ */
+ writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
+ writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+ l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xB3000000 0xFE000000
+ * 0xE0000000 0xFD000000
+ * 0xEC000000 0xFC000000
+ * 0xED000000 0xFB000000
+ */
+struct map_desc spear13xx_io_desc[] __initdata = {
+ {
+ .virtual = VA_PERIP_GRP2_BASE,
+ .pfn = __phys_to_pfn(PERIP_GRP2_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VA_PERIP_GRP1_BASE,
+ .pfn = __phys_to_pfn(PERIP_GRP1_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VA_A9SM_AND_MPMC_BASE,
+ .pfn = __phys_to_pfn(A9SM_AND_MPMC_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = (unsigned long)VA_L2CC_BASE,
+ .pfn = __phys_to_pfn(L2CC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+ iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+ if (of_machine_is_compatible("st,spear1310"))
+ spear1310_clk_init();
+ else if (of_machine_is_compatible("st,spear1340"))
+ spear1340_clk_init();
+ else
+ pr_err("%s: Unknown machine\n", __func__);
+}
+
+static void __init spear13xx_timer_init(void)
+{
+ char pclk_name[] = "osc_24m_clk";
+ struct clk *gpt_clk, *pclk;
+
+ spear13xx_clk_init();
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
+
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+ pclk_name);
+ BUG();
+ }
+
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
+
+ spear_setup_of_timer();
+ twd_local_timer_of_register();
+}
+
+struct sys_timer spear13xx_timer = {
+ .init = spear13xx_timer_init,
+};
+
+static const struct of_device_id gic_of_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+ { /* Sentinel */ }
+};
+
+void __init spear13xx_dt_init_irq(void)
+{
+ of_irq_init(gic_of_match);
+}
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index 17b5d83..8d12faa 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,7 +3,7 @@
#
# common files
-obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o
# spear300 specific files
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
deleted file mode 100644
index cd6c110..0000000
--- a/arch/arm/mach-spear3xx/clock.c
+++ /dev/null
@@ -1,892 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clkdev.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-#include <mach/spear.h>
-
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 11
-#define GPT2_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB 3
-#define SSP_CLK_ENB 5
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FIRDA_CLK_ENB 10
-#define GPT1_CLK_ENB 11
-#define GPT2_CLK_ENB 12
-#define ADC_CLK_ENB 15
-#define RTC_CLK_ENB 17
-#define GPIO_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH_CLK_ENB 25
-#define C3_CLK_ENB 31
-
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
- .pclk = &osc_32k_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = RTC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
- .mode_mask = PLL_MODE_MASK,
- .mode_shift = PLL_MODE_SHIFT,
- .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
- .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
- .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
- .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
- .div_p_mask = PLL_DIV_P_MASK,
- .div_p_shift = PLL_DIV_P_SHIFT,
- .div_n_mask = PLL_DIV_N_MASK,
- .div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
- .mode_reg = PLL1_CTR,
- .cfg_reg = PLL1_FRQ,
- .masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
- {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
- {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
- .flags = ENABLED_ON_INIT,
- .pclk = &osc_24m_clk,
- .en_reg = PLL1_CTR,
- .en_reg_bit = PLL_ENABLE,
- .calc_rate = &pll_calc_rate,
- .recalc = &pll_clk_recalc,
- .set_rate = &pll_clk_set_rate,
- .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
- .private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_24m_clk,
- .rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_24m_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
- {.div = 3}, /* == parent divided by 4 */
- {.div = 2}, /* == parent divided by 3 */
- {.div = 1}, /* == parent divided by 2 */
- {.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
- .eq_sel_mask = AUX_EQ_SEL_MASK,
- .eq_sel_shift = AUX_EQ_SEL_SHIFT,
- .eq1_mask = AUX_EQ1_SEL,
- .eq2_mask = AUX_EQ2_SEL,
- .xscale_sel_mask = AUX_XSCALE_MASK,
- .xscale_sel_shift = AUX_XSCALE_SHIFT,
- .yscale_sel_mask = AUX_YSCALE_MASK,
- .yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
- .synth_reg = UART_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
- /* For PLL1 = 332 MHz */
- {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
- {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
- {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
- .en_reg = UART_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
- .private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
- {
- .pclk = &uart_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
- .pclk_info = uart_pclk_info,
- .pclk_count = ARRAY_SIZE(uart_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
- .synth_reg = FIRDA_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
- .en_reg = FIRDA_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
- .private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
- {
- .pclk = &firda_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
- .pclk_info = firda_pclk_info,
- .pclk_count = ARRAY_SIZE(firda_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FIRDA_CLK_ENB,
- .pclk_sel = &firda_pclk_sel,
- .pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
- .mscale_sel_mask = GPT_MSCALE_MASK,
- .mscale_sel_shift = GPT_MSCALE_SHIFT,
- .nscale_sel_mask = GPT_NSCALE_MASK,
- .nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
- /* For pll1 = 332 MHz */
- {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
- {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
- {.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
- .synth_reg = PRSC1_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
- {
- .pclk = &gpt0_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt0_pclk_sel,
- .pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
- .synth_reg = PRSC2_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
- {
- .pclk = &gpt1_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
- .pclk_info = gpt1_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT1_CLK_ENB,
- .pclk_sel = &gpt1_pclk_sel,
- .pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
- .synth_reg = PRSC3_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
- {
- .pclk = &gpt2_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
- .pclk_info = gpt2_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt2_pclk_sel,
- .pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBD_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from usbh clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &usbh_clk,
- .recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &usbh_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = I2C_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = DMA_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = JPEG_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GMAC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SMI_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = C3_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = ADC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
- defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll3_48m_clk,
- .recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
- CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
- /* root clks */
- CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
- CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
- /* clock derived from 32 KHz osc clk */
- CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
- /* clock derived from 24 MHz osc clk */
- CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
- CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
- CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
- /* clock derived from pll1 clk */
- CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
- CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
- CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
- CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
- CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
- CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
- CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
- CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
- CLKDEV_INIT("firda", NULL, &firda_clk),
- CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
- CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
- CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
- /* clock derived from pll3 clk */
- CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
- CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk),
- /* clock derived from usbh clk */
- CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
- CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
- /* clock derived from ahb clk */
- CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
- CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
- CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
- CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
- CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
- CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
- CLKDEV_INIT("c3", NULL, &c3_clk),
- /* clock derived from apb clk */
- CLKDEV_INIT("adc", NULL, &adc_clk),
- CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
- CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
- CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
- CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
- CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
- CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
- CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
-};
-
-void __init spear300_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
- clk_register(&spear300_clk_lookups[i]);
-
- clk_init();
-}
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
- CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
- CLKDEV_INIT(NULL, "emi", &emi_clk),
- CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
- CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
- CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
- CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
- CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
-};
-
-void __init spear310_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
- clk_register(&spear310_clk_lookups[i]);
-
- clk_init();
-}
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
- CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
- CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
- CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
- CLKDEV_INIT(NULL, "emi", &emi_clk),
- CLKDEV_INIT("pwm", NULL, &pwm_clk),
- CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
- CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
- CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
- CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
- CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
- CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
- CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
-};
-
-void __init spear320_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
- clk_register(&spear320_clk_lookups[i]);
-
- clk_init();
-}
-#endif
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index bdb3045..4a95b94 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -27,28 +27,11 @@
extern struct pl08x_platform_data pl080_plat_data;
/* Add spear3xx family function declarations here */
-void __init spear_setup_timer(resource_size_t base, int irq);
+void __init spear_setup_of_timer(void);
+void __init spear3xx_clk_init(void);
void __init spear3xx_map_io(void);
void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
-/* spear300 declarations */
-#ifdef CONFIG_MACH_SPEAR300
-void __init spear300_clk_init(void);
-
-#endif /* CONFIG_MACH_SPEAR300 */
-
-/* spear310 declarations */
-#ifdef CONFIG_MACH_SPEAR310
-void __init spear310_clk_init(void);
-
-#endif /* CONFIG_MACH_SPEAR310 */
-
-/* spear320 declarations */
-#ifdef CONFIG_MACH_SPEAR320
-void __init spear320_clk_init(void);
-
-#endif /* CONFIG_MACH_SPEAR320 */
-
#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 319620a..51bd62a 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -16,7 +16,6 @@
/* FIXME: probe all these from DT */
#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1
-#define SPEAR3XX_IRQ_CPU_GPT1_1 2
#define SPEAR3XX_IRQ_GEN_RAS_1 28
#define SPEAR3XX_IRQ_GEN_RAS_2 29
#define SPEAR3XX_IRQ_GEN_RAS_3 30
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index e0ab72e..18e2ac5 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,6 +14,8 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
+#include <mach/spear.h>
+
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 6d4dadc..51eb9531 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -26,7 +26,6 @@
/* ML1 - Multi Layer CPU Subsystem */
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
-#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000)
/* ICM3 - Basic Subsystem */
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
@@ -45,4 +44,17 @@
#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE
#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000)
+#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
+#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
+ #define SPEAR320_UARTX_PCLK_MASK 0x1
+ #define SPEAR320_UART2_PCLK_SHIFT 8
+ #define SPEAR320_UART3_PCLK_SHIFT 9
+ #define SPEAR320_UART4_PCLK_SHIFT 10
+ #define SPEAR320_UART5_PCLK_SHIFT 11
+ #define SPEAR320_UART6_PCLK_SHIFT 12
+ #define SPEAR320_RS485_PCLK_SHIFT 13
+
#endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f75fe25..f74a05b 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -337,7 +337,6 @@
static void __init spear300_map_io(void)
{
spear3xx_map_io();
- spear300_clk_init();
}
DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index f0842a5..84dfb09 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -478,7 +478,6 @@
static void __init spear310_map_io(void)
{
spear3xx_map_io();
- spear310_clk_init();
}
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index e8caeef..a88fa84 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -27,7 +27,6 @@
#define SPEAR320_UART2_BASE UL(0xA4000000)
#define SPEAR320_SSP0_BASE UL(0xA5000000)
#define SPEAR320_SSP1_BASE UL(0xA6000000)
-#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
/* Interrupt registers offsets and masks */
#define SPEAR320_INT_STS_MASK_REG 0x04
@@ -481,10 +480,19 @@
NULL,
};
+struct map_desc spear320_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR320_SOC_CONFIG_BASE,
+ .pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
static void __init spear320_map_io(void)
{
+ iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
spear3xx_map_io();
- spear320_clk_init();
}
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 826ac20..f22419e 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -90,6 +90,8 @@
char pclk_name[] = "pll3_48m_clk";
struct clk *gpt_clk, *pclk;
+ spear3xx_clk_init();
+
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
@@ -109,7 +111,7 @@
clk_put(gpt_clk);
clk_put(pclk);
- spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1);
+ spear_setup_of_timer();
}
struct sys_timer spear3xx_timer = {
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index 76e5750..898831d 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -3,4 +3,4 @@
#
# common files
-obj-y += clock.o spear6xx.o
+obj-y += spear6xx.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index bef77d4..0000000
--- a/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-#include <mach/spear.h>
-
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT 2
-#define CLCD_CLK_MASK 0x3
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 10
-#define GPT2_CLK_SHIFT 11
-#define GPT3_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB 3
-#define UART1_CLK_ENB 4
-#define SSP0_CLK_ENB 5
-#define SSP1_CLK_ENB 6
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FSMC_CLK_ENB 9
-#define FIRDA_CLK_ENB 10
-#define GPT2_CLK_ENB 11
-#define GPT3_CLK_ENB 12
-#define GPIO2_CLK_ENB 13
-#define SSP2_CLK_ENB 14
-#define ADC_CLK_ENB 15
-#define GPT1_CLK_ENB 11
-#define RTC_CLK_ENB 17
-#define GPIO1_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define CLCD_CLK_ENB 22
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH0_CLK_ENB 25
-#define USBH1_CLK_ENB 26
-
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
- .pclk = &osc_32k_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = RTC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
- .mode_mask = PLL_MODE_MASK,
- .mode_shift = PLL_MODE_SHIFT,
- .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
- .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
- .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
- .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
- .div_p_mask = PLL_DIV_P_MASK,
- .div_p_shift = PLL_DIV_P_SHIFT,
- .div_n_mask = PLL_DIV_N_MASK,
- .div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
- .mode_reg = PLL1_CTR,
- .cfg_reg = PLL1_FRQ,
- .masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
- {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
- {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
- .flags = ENABLED_ON_INIT,
- .pclk = &osc_30m_clk,
- .en_reg = PLL1_CTR,
- .en_reg_bit = PLL_ENABLE,
- .calc_rate = &pll_calc_rate,
- .recalc = &pll_clk_recalc,
- .set_rate = &pll_clk_set_rate,
- .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
- .private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_30m_clk,
- .rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_30m_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
- {.div = 3}, /* == parent divided by 4 */
- {.div = 2}, /* == parent divided by 3 */
- {.div = 1}, /* == parent divided by 2 */
- {.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
- .eq_sel_mask = AUX_EQ_SEL_MASK,
- .eq_sel_shift = AUX_EQ_SEL_SHIFT,
- .eq1_mask = AUX_EQ1_SEL,
- .eq2_mask = AUX_EQ2_SEL,
- .xscale_sel_mask = AUX_XSCALE_MASK,
- .xscale_sel_shift = AUX_XSCALE_SHIFT,
- .yscale_sel_mask = AUX_YSCALE_MASK,
- .yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
- .synth_reg = UART_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
- /* For PLL1 = 332 MHz */
- {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
- {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
- {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
- .en_reg = UART_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
- {
- .pclk = &uart_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
- .pclk_info = uart_pclk_info,
- .pclk_count = ARRAY_SIZE(uart_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART0_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART1_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
- .synth_reg = FIRDA_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
- .en_reg = FIRDA_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
- {
- .pclk = &firda_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
- .pclk_info = firda_pclk_info,
- .pclk_count = ARRAY_SIZE(firda_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FIRDA_CLK_ENB,
- .pclk_sel = &firda_pclk_sel,
- .pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
- .synth_reg = CLCD_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
- .en_reg = CLCD_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
- {
- .pclk = &clcd_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
- .pclk_info = clcd_pclk_info,
- .pclk_count = ARRAY_SIZE(clcd_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = CLCD_CLK_ENB,
- .pclk_sel = &clcd_pclk_sel,
- .pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
- .mscale_sel_mask = GPT_MSCALE_MASK,
- .mscale_sel_shift = GPT_MSCALE_SHIFT,
- .nscale_sel_mask = GPT_NSCALE_MASK,
- .nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
- /* For pll1 = 332 MHz */
- {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
- {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
- {.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
- .synth_reg = PRSC1_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
- {
- .pclk = &gpt0_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt0_pclk_sel,
- .pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt1_pclk_sel,
- .pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
- .synth_reg = PRSC2_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
- {
- .pclk = &gpt2_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
- .pclk_info = gpt2_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt2_pclk_sel,
- .pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
- .synth_reg = PRSC3_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
- {
- .pclk = &gpt3_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
- .pclk_info = gpt3_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt3_pclk_sel,
- .pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH0_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBD_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = I2C_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = DMA_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = JPEG_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GMAC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SMI_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FSMC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = ADC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP0_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP2_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO2_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
- CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
- /* root clks */
- CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
- CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk),
- /* clock derived from 32 KHz os clk */
- CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
- /* clock derived from 30 MHz os clk */
- CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
- CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
- CLKDEV_INIT("wdt", NULL, &wdt_clk),
- /* clock derived from pll1 clk */
- CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
- CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
- CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
- CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
- CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk),
- CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
- CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
- CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk),
- CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk),
- CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk),
- CLKDEV_INIT("firda", NULL, &firda_clk),
- CLKDEV_INIT("clcd", NULL, &clcd_clk),
- CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
- CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
- CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
- CLKDEV_INIT("gpt3", NULL, &gpt3_clk),
- /* clock derived from pll3 clk */
- CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
- CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
- CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
- /* clock derived from ahb clk */
- CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
- CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk),
- CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
- CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
- CLKDEV_INIT("gmac", NULL, &gmac_clk),
- CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
- CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk),
- /* clock derived from apb clk */
- CLKDEV_INIT("adc", NULL, &adc_clk),
- CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
- CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
- CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
- CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk),
- CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk),
- CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk),
-};
-
-void __init spear6xx_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- clk_init();
-}
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 7167fd3..65514b15 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -16,7 +16,7 @@
#include <linux/init.h>
-void __init spear_setup_timer(resource_size_t base, int irq);
+void __init spear_setup_of_timer(void);
void spear_restart(char, const char *);
void __init spear6xx_clk_init(void);
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
index 2b73538..37a5c41 100644
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -16,9 +16,6 @@
/* IRQ definitions */
/* VIC 1 */
-/* FIXME: probe this from DT */
-#define IRQ_CPU_GPT1_1 16
-
#define IRQ_VIC_END 64
/* GPIO pins virtual irqs */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 2b9aaa6..179e457 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,6 +14,8 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
+#include <mach/spear.h>
+
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index d278ed0..cb8ed2f 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -25,7 +25,6 @@
/* ML-1, 2 - Multi Layer CPU Subsystem */
#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
/* ICM3 - Basic Subsystem */
#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index de194db..2e2e359 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -419,9 +419,6 @@
void __init spear6xx_map_io(void)
{
iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
- /* This will initialize clock framework */
- spear6xx_clk_init();
}
static void __init spear6xx_timer_init(void)
@@ -429,6 +426,8 @@
char pclk_name[] = "pll3_48m_clk";
struct clk *gpt_clk, *pclk;
+ spear6xx_clk_init();
+
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
@@ -448,7 +447,7 @@
clk_put(gpt_clk);
clk_put(pclk);
- spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
+ spear_setup_of_timer();
}
struct sys_timer spear6xx_timer = {
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d0f2546..6a113a9 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -50,6 +50,14 @@
depends on ARCH_TEGRA_2x_SOC
select PCI
+config TEGRA_AHB
+ bool "Enable AHB driver for NVIDIA Tegra SoCs"
+ default y
+ help
+ Adds AHB configuration functionality for NVIDIA Tegra SoCs,
+ which controls AHB bus master arbitration and some
+ perfomance parameters(priority, prefech size).
+
comment "Tegra board type"
config MACH_HARMONY
@@ -111,7 +119,7 @@
Support for the nVidia Ventana development platform
choice
- prompt "Low-level debug console UART"
+ prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
config TEGRA_DEBUG_UART_NONE
@@ -134,6 +142,33 @@
endchoice
+choice
+ prompt "Automatic low-level debug console UART"
+ default TEGRA_DEBUG_UART_AUTO_NONE
+
+config TEGRA_DEBUG_UART_AUTO_NONE
+ bool "None"
+
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Via ODMDATA"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the ODMDATA value. This value is part of the BCT, and is written
+ to the boot memory device using nvflash, or other flashing tool.
+ When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+ 0/1/2/3/4 are UART A/B/C/D/E.
+
+config TEGRA_DEBUG_UART_AUTO_SCRATCH
+ bool "Via UART scratch register"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the UART scratch register value. Some bootloaders put ASCII 'D'
+ in this register when they initialize their own console UART output.
+ Using this option allows the kernel to automatically pick the same
+ UART.
+
+endchoice
+
config TEGRA_SYSTEM_DMA
bool "Enable system DMA driver for NVIDIA Tegra SoCs"
default y
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index fac3eb1..eb7249d 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -110,6 +110,7 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
.dt_compat = tegra20_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 5f7c03e..4f76fa7 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -51,12 +51,22 @@
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
{}
};
static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 408000000, true },
+ { "pll_a", "pll_p_out1", 564480000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "extern1", "pll_a_out0", 0, true },
+ { "clk_out_1", "extern1", 0, true },
+ { "i2s0", "pll_a_out0", 11289600, false},
+ { "i2s1", "pll_a_out0", 11289600, false},
+ { "i2s2", "pll_a_out0", 11289600, false},
+ { "i2s3", "pll_a_out0", 11289600, false},
+ { "i2s4", "pll_a_out0", 11289600, false},
{ NULL, NULL, 0, 0},
};
@@ -80,6 +90,7 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra30_dt_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
.dt_compat = tegra30_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index b906b3b..e65e837f 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -192,5 +192,6 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_harmony_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index d0735c7..bbc1907 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -162,6 +162,8 @@
static void paz00_usb_init(void)
{
+ tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
+
platform_device_register(&tegra_ehci2_device);
platform_device_register(&tegra_ehci3_device);
}
@@ -179,7 +181,6 @@
{ "uarta", "pll_p", 216000000, true },
{ "uartc", "pll_p", 216000000, true },
- { "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
{ "usb2", "clk_m", 12000000, false },
{ "usb3", "clk_m", 12000000, false },
@@ -224,5 +225,6 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_paz00_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 79064c7..71e9f3f 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -277,6 +277,7 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_seaboard_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
MACHINE_END
@@ -288,6 +289,7 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_kaen_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
MACHINE_END
@@ -299,5 +301,6 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_wario_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index bc59b37..776aa95 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -118,6 +118,8 @@
pdata = tegra_ehci1_device.dev.platform_data;
pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
+ tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
+
platform_device_register(&tegra_ehci3_device);
platform_device_register(&tegra_ehci2_device);
platform_device_register(&tegra_ehci1_device);
@@ -176,5 +178,6 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_trimslice_init,
+ .init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 75d1543..6501496 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -32,5 +32,19 @@
void __init tegra_dt_init_irq(void);
int __init tegra_pcie_init(bool init_port0, bool init_port1);
+void tegra_init_late(void);
+
+#ifdef CONFIG_DEBUG_FS
+int tegra_clk_debugfs_init(void);
+#else
+static inline int tegra_clk_debugfs_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
+int __init tegra_powergate_debugfs_init(void);
+#else
+static inline int tegra_powergate_debugfs_init(void) { return 0; }
+#endif
+
extern struct sys_timer tegra_timer;
#endif
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 8dad8d1..58f981c 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -642,7 +642,7 @@
return 0;
}
-static int __init clk_debugfs_init(void)
+int __init tegra_clk_debugfs_init(void)
{
struct clk *c;
struct dentry *d;
@@ -669,5 +669,4 @@
return err;
}
-late_initcall(clk_debugfs_init);
#endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 22df10f..204a5c8 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -82,10 +82,12 @@
{ "pll_p_out1", "pll_p", 28800000, true },
{ "pll_p_out2", "pll_p", 48000000, true },
{ "pll_p_out3", "pll_p", 72000000, true },
- { "pll_p_out4", "pll_p", 108000000, true },
- { "sclk", "pll_p_out4", 108000000, true },
- { "hclk", "sclk", 108000000, true },
- { "pclk", "hclk", 54000000, true },
+ { "pll_p_out4", "pll_p", 24000000, true },
+ { "pll_c", "clk_m", 600000000, true },
+ { "pll_c_out1", "pll_c", 120000000, true },
+ { "sclk", "pll_c_out1", 120000000, true },
+ { "hclk", "sclk", 120000000, true },
+ { "pclk", "hclk", 60000000, true },
{ "csite", NULL, 0, true },
{ "emc", NULL, 0, true },
{ "cpu", NULL, 0, true },
@@ -93,6 +95,17 @@
};
#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
+ /* name parent rate enabled */
+ { "clk_m", NULL, 0, true },
+ { "pll_p", "clk_m", 408000000, true },
+ { "pll_p_out1", "pll_p", 9600000, true },
+ { NULL, NULL, 0, 0},
+};
+#endif
+
+
static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
{
#ifdef CONFIG_CACHE_L2X0
@@ -127,8 +140,15 @@
{
tegra_init_fuse();
tegra30_init_clocks();
+ tegra_clk_init_from_table(tegra30_clk_init_table);
tegra_init_cache(0x441, 0x551);
tegra_pmc_init();
tegra_powergate_init();
}
#endif
+
+void __init tegra_init_late(void)
+{
+ tegra_clk_debugfs_init();
+ tegra_powergate_debugfs_init();
+}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 2d8dfa2..c70e65f 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -439,9 +439,8 @@
},
};
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
- /* All existing boards use GPIO PV0 for phy reset */
- .reset_gpio = TEGRA_GPIO_PV0,
+struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+ .reset_gpio = -1,
.clk = "cdev2",
};
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 138c642..4f50527 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -22,6 +22,10 @@
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_usb.h>
+#include <mach/usb_phy.h>
+
+extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;
+
extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
new file mode 100644
index 0000000..e0f8c84
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __MACH_TEGRA_AHB_H__
+#define __MACH_TEGRA_AHB_H__
+
+extern int tegra_ahb_enable_smmu(struct device_node *ahb);
+
+#endif /* __MACH_TEGRA_AHB_H__ */
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 5a440f3..937c4c5 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -63,52 +63,86 @@
buf[0] = 0;
}
-/*
- * Setup before decompression. This is where we do UART selection for
- * earlyprintk and init the uart_base register.
- */
-static inline void arch_decomp_setup(void)
+static const struct {
+ u32 base;
+ u32 reset_reg;
+ u32 clock_reg;
+ u32 bit;
+} uarts[] = {
+ {
+ TEGRA_UARTA_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 6,
+ },
+ {
+ TEGRA_UARTB_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 7,
+ },
+ {
+ TEGRA_UARTC_BASE,
+ TEGRA_CLK_RESET_BASE + 0x08,
+ TEGRA_CLK_RESET_BASE + 0x14,
+ 23,
+ },
+ {
+ TEGRA_UARTD_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 1,
+ },
+ {
+ TEGRA_UARTE_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 2,
+ },
+};
+
+static inline bool uart_clocked(int i)
{
- static const struct {
- u32 base;
- u32 reset_reg;
- u32 clock_reg;
- u32 bit;
- } uarts[] = {
- {
- TEGRA_UARTA_BASE,
- TEGRA_CLK_RESET_BASE + 0x04,
- TEGRA_CLK_RESET_BASE + 0x10,
- 6,
- },
- {
- TEGRA_UARTB_BASE,
- TEGRA_CLK_RESET_BASE + 0x04,
- TEGRA_CLK_RESET_BASE + 0x10,
- 7,
- },
- {
- TEGRA_UARTC_BASE,
- TEGRA_CLK_RESET_BASE + 0x08,
- TEGRA_CLK_RESET_BASE + 0x14,
- 23,
- },
- {
- TEGRA_UARTD_BASE,
- TEGRA_CLK_RESET_BASE + 0x0c,
- TEGRA_CLK_RESET_BASE + 0x18,
- 1,
- },
- {
- TEGRA_UARTE_BASE,
- TEGRA_CLK_RESET_BASE + 0x0c,
- TEGRA_CLK_RESET_BASE + 0x18,
- 2,
- },
- };
+ if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+ return false;
+
+ if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ return false;
+
+ return true;
+}
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+int auto_odmdata(void)
+{
+ volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE;
+ u32 odmdata = pmc[0xa0 / 4];
+
+ /*
+ * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART
+ * Some boards apparently swap the last two values, but we don't have
+ * any way of catering for that here, so we just accept either. If this
+ * doesn't make sense for your board, just don't enable this feature.
+ *
+ * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E.
+ */
+
+ switch ((odmdata >> 18) & 3) {
+ case 2:
+ case 3:
+ break;
+ default:
+ return -1;
+ }
+
+ return (odmdata >> 15) & 7;
+}
+#endif
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
+int auto_scratch(void)
+{
int i;
- volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
- u32 chip, div;
/*
* Look for the first UART that:
@@ -125,20 +159,60 @@
* back to what's specified in TEGRA_DEBUG_UART_BASE.
*/
for (i = 0; i < ARRAY_SIZE(uarts); i++) {
- if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
- continue;
-
- if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ if (!uart_clocked(i))
continue;
uart = (volatile u8 *)uarts[i].base;
if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
continue;
- break;
+ return i;
}
- if (i == ARRAY_SIZE(uarts))
- uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+
+ return -1;
+}
+#endif
+
+/*
+ * Setup before decompression. This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
+static inline void arch_decomp_setup(void)
+{
+ int uart_id, auto_uart_id;
+ volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+ u32 chip, div;
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+ uart_id = 0;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+ uart_id = 1;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+ uart_id = 2;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+ uart_id = 3;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+ uart_id = 4;
+#else
+ uart_id = -1;
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ auto_uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
+ auto_uart_id = auto_scratch();
+#else
+ auto_uart_id = -1;
+#endif
+ if (auto_uart_id != -1)
+ uart_id = auto_uart_id;
+
+ if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
+ !uart_clocked(uart_id))
+ uart = NULL;
+ else
+ uart = (volatile u8 *)uarts[uart_id].base;
+
save_uart_address();
if (uart == NULL)
return;
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
index de1a0f6..935ce9f 100644
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -61,8 +61,8 @@
struct usb_phy *ulpi;
};
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
- void *config, enum tegra_usb_phy_mode phy_mode);
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+ void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index c238699..f5b12fb 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -234,7 +234,7 @@
.release = single_release,
};
-static int __init powergate_debugfs_init(void)
+int __init tegra_powergate_debugfs_init(void)
{
struct dentry *d;
int err = -ENOMEM;
@@ -247,6 +247,4 @@
return err;
}
-late_initcall(powergate_debugfs_init);
-
#endif
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index bae09b8..b59315c 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1486,6 +1486,10 @@
};
static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+ { 12000000, 600000000, 600, 12, 1, 8 },
+ { 13000000, 600000000, 600, 13, 1, 8 },
+ { 19200000, 600000000, 500, 16, 1, 6 },
+ { 26000000, 600000000, 600, 26, 1, 8 },
{ 0, 0, 0, 0, 0, 0 },
};
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index 6d08b53..e33fe4b14 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -3015,6 +3015,15 @@
CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
CLK_DUPLICATE("twd", "smp_twd", NULL),
CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+ CLK_DUPLICATE("i2s0", NULL, "i2s0"),
+ CLK_DUPLICATE("i2s1", NULL, "i2s1"),
+ CLK_DUPLICATE("i2s2", NULL, "i2s2"),
+ CLK_DUPLICATE("i2s3", NULL, "i2s3"),
+ CLK_DUPLICATE("i2s4", NULL, "i2s4"),
+ CLK_DUPLICATE("dam0", NULL, "dam0"),
+ CLK_DUPLICATE("dam1", NULL, "dam1"),
+ CLK_DUPLICATE("dam2", NULL, "dam2"),
+ CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
};
struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index d71d2fe..54e353c8 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
@@ -654,8 +655,8 @@
clk_disable(phy->clk);
}
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
- void *config, enum tegra_usb_phy_mode phy_mode)
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+ void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
{
struct tegra_usb_phy *phy;
struct tegra_ulpi_config *ulpi_config;
@@ -711,6 +712,16 @@
err = -ENXIO;
goto err1;
}
+ if (!gpio_is_valid(ulpi_config->reset_gpio))
+ ulpi_config->reset_gpio =
+ of_get_named_gpio(dev->of_node,
+ "nvidia,phy-reset-gpio", 0);
+ if (!gpio_is_valid(ulpi_config->reset_gpio)) {
+ pr_err("%s: invalid reset gpio: %d\n", __func__,
+ ulpi_config->reset_gpio);
+ err = -EINVAL;
+ goto err1;
+ }
gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
gpio_direction_output(ulpi_config->reset_gpio, 0);
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index f943687..b23a643 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -785,6 +785,7 @@
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = mop500_init_machine,
+ .init_late = ux500_init_late,
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -794,6 +795,7 @@
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = hrefv60_init_machine,
+ .init_late = ux500_init_late,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -804,6 +806,7 @@
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
+ .init_late = ux500_init_late,
MACHINE_END
#ifdef CONFIG_MACH_UX500_DT
@@ -918,6 +921,7 @@
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = u8500_init_machine,
+ .init_late = ux500_init_late,
.dt_compat = u8500_dt_board_compat,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 1762c47..8d73b06 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -635,7 +635,7 @@
return 0;
}
-static int __init clk_debugfs_init(void)
+int __init clk_debugfs_init(void)
{
struct clk *c;
struct dentry *d;
@@ -657,7 +657,6 @@
return err;
}
-late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_DEBUG_FS) */
unsigned long clk_smp_twd_rate = 500000000;
@@ -696,12 +695,11 @@
.notifier_call = clk_twd_cpufreq_transition,
};
-static int clk_init_smp_twd_cpufreq(void)
+int clk_init_smp_twd_cpufreq(void)
{
return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
}
-late_initcall(clk_init_smp_twd_cpufreq);
#endif
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index d776ada..65d27a1 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -150,3 +150,15 @@
int __init clk_db8500_ed_fixup(void);
int __init clk_init(void);
+
+#ifdef CONFIG_DEBUG_FS
+int clk_debugfs_init(void);
+#else
+static inline int clk_debugfs_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+int clk_init_smp_twd_cpufreq(void);
+#else
+static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
+#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index a29a0e3..e2360e7 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -73,6 +73,12 @@
clk_init();
}
+void __init ux500_init_late(void)
+{
+ clk_debugfs_init();
+ clk_init_smp_twd_cpufreq();
+}
+
static const char * __init ux500_get_machine(void)
{
return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 4e369f1..8b7ed82 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -20,6 +20,7 @@
extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
+extern void __init ux500_init_late(void);
extern struct device *ux500_soc_device_init(const char *soc_id);
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 2ed3ab1..5079787 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -41,6 +41,7 @@
#include <mach/clock.h>
#include <mach/hardware.h>
+#ifndef CONFIG_COMMON_CLK
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
@@ -200,6 +201,16 @@
}
EXPORT_SYMBOL(clk_get_parent);
+#else
+
+/*
+ * Lock to protect the clock module (ccm) registers. Used
+ * on all i.MXs
+ */
+DEFINE_SPINLOCK(imx_ccm_lock);
+
+#endif /* CONFIG_COMMON_CLK */
+
/*
* Get the resulting clock rate from a PLL register value and the input
* frequency. PLLs with this register layout can at least be found on
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 753a598..bd940c7 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -23,6 +23,7 @@
#ifndef __ASSEMBLY__
#include <linux/list.h>
+#ifndef CONFIG_COMMON_CLK
struct module;
struct clk {
@@ -59,6 +60,9 @@
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
+#endif /* CONFIG_COMMON_CLK */
+
+extern spinlock_t imx_ccm_lock;
unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 0319c4a..cf663d8 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -53,6 +53,7 @@
extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
+extern void imx51_init_late(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -149,4 +150,10 @@
static inline void imx6q_pm_init(void) {}
#endif
+#ifdef CONFIG_NEON
+extern int mx51_neon_fixup(void);
+#else
+static inline int mx51_neon_fixup(void) { return 0; }
+#endif
+
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 8ddda36..761e45f 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,6 +24,8 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
+#define UART_PADDR MX6Q_UART2_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
index 254a561..f7e7dba 100644
--- a/arch/arm/plat-mxc/include/mach/mx6q.h
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -27,6 +27,8 @@
#define MX6Q_CCM_SIZE 0x4000
#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
#define MX6Q_ANATOP_SIZE 0x1000
+#define MX6Q_UART2_BASE_ADDR 0x021e8000
+#define MX6Q_UART2_SIZE 0x4000
#define MX6Q_UART4_BASE_ADDR 0x021f0000
#define MX6Q_UART4_SIZE 0x4000
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7daf7c9..99f958c 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -25,6 +25,7 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/sched_clock.h>
@@ -282,6 +283,19 @@
void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_ipg_clk;
+
+ if (!timer_clk) {
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
+ }
+
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+ }
clk_prepare_enable(timer_clk);
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 44ae077..2132c4f 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -28,19 +28,20 @@
#include <plat/clock.h>
+/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
+#define OMAP2_32KSYNCNT_CR_OFF 0x10
+
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
* higher resolution in free-running counter modes (e.g. 12 MHz xtal),
* but systems won't necessarily want to spend resources that way.
*/
-static void __iomem *timer_32k_base;
-
-#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
+static void __iomem *sync32k_cnt_reg;
static u32 notrace omap_32k_read_sched_clock(void)
{
- return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
+ return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
}
/**
@@ -60,7 +61,7 @@
struct timespec *tsp = &persistent_ts;
last_cycles = cycles;
- cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
+ cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
delta = cycles - last_cycles;
nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
@@ -69,55 +70,41 @@
*ts = *tsp;
}
-int __init omap_init_clocksource_32k(void)
+/**
+ * omap_init_clocksource_32k - setup and register counter 32k as a
+ * kernel clocksource
+ * @pbase: base addr of counter_32k module
+ * @size: size of counter_32k to map
+ *
+ * Returns 0 upon success or negative error code upon failure.
+ *
+ */
+int __init omap_init_clocksource_32k(void __iomem *vbase)
{
- static char err[] __initdata = KERN_ERR
- "%s: can't register clocksource!\n";
+ int ret;
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- u32 pbase;
- unsigned long size = SZ_4K;
- void __iomem *base;
- struct clk *sync_32k_ick;
+ /*
+ * 32k sync Counter register offset is at 0x10
+ */
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF;
- if (cpu_is_omap16xx()) {
- pbase = OMAP16XX_TIMER_32K_SYNCHRONIZED;
- size = SZ_1K;
- } else if (cpu_is_omap2420())
- pbase = OMAP2420_32KSYNCT_BASE + 0x10;
- else if (cpu_is_omap2430())
- pbase = OMAP2430_32KSYNCT_BASE + 0x10;
- else if (cpu_is_omap34xx())
- pbase = OMAP3430_32KSYNCT_BASE + 0x10;
- else if (cpu_is_omap44xx())
- pbase = OMAP4430_32KSYNCT_BASE + 0x10;
- else
- return -ENODEV;
+ /*
+ * 120000 rough estimate from the calculations in
+ * __clocksource_updatefreq_scale.
+ */
+ clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+ 32768, NSEC_PER_SEC, 120000);
- /* For this to work we must have a static mapping in io.c for this area */
- base = ioremap(pbase, size);
- if (!base)
- return -ENODEV;
-
- sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
- if (!IS_ERR(sync_32k_ick))
- clk_enable(sync_32k_ick);
-
- timer_32k_base = base;
-
- /*
- * 120000 rough estimate from the calculations in
- * __clocksource_updatefreq_scale.
- */
- clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
- 32768, NSEC_PER_SEC, 120000);
-
- if (clocksource_mmio_init(base, "32k_counter", 32768, 250, 32,
- clocksource_mmio_readl_up))
- printk(err, "32k_counter");
-
- setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
- register_persistent_clock(NULL, omap_read_persistent_clock);
+ ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
+ 250, 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("32k_counter: can't register clocksource\n");
+ return ret;
}
+
+ setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
+ register_persistent_clock(NULL, omap_read_persistent_clock);
+ pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
return 0;
}
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 09b07d2..1cba927 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -28,54 +28,6 @@
#include <plat/menelaus.h>
#include <plat/omap44xx.h>
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-#define OMAP_MMC_NR_RES 2
-
-/*
- * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
- */
-int __init omap_mmc_add(const char *name, int id, unsigned long base,
- unsigned long size, unsigned int irq,
- struct omap_mmc_platform_data *data)
-{
- struct platform_device *pdev;
- struct resource res[OMAP_MMC_NR_RES];
- int ret;
-
- pdev = platform_device_alloc(name, id);
- if (!pdev)
- return -ENOMEM;
-
- memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
- res[0].start = base;
- res[0].end = base + size - 1;
- res[0].flags = IORESOURCE_MEM;
- res[1].start = res[1].end = irq;
- res[1].flags = IORESOURCE_IRQ;
-
- ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
- if (ret == 0)
- ret = platform_device_add_data(pdev, data, sizeof(*data));
- if (ret)
- goto fail;
-
- ret = platform_device_add(pdev);
- if (ret)
- goto fail;
-
- /* return device handle to board setup code */
- data->dev = &pdev->dev;
- return 0;
-
-fail:
- platform_device_put(pdev);
- return ret;
-}
-
-#endif
-
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
@@ -109,79 +61,6 @@
static inline void omap_init_rng(void) {}
#endif
-/*-------------------------------------------------------------------------*/
-
-/* Numbering for the SPI-capable controllers when used for SPI:
- * spi = 1
- * uwire = 2
- * mmc1..2 = 3..4
- * mcbsp1..3 = 5..7
- */
-
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
-
-#define OMAP_UWIRE_BASE 0xfffb3000
-
-static struct resource uwire_resources[] = {
- {
- .start = OMAP_UWIRE_BASE,
- .end = OMAP_UWIRE_BASE + 0x20,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap_uwire_device = {
- .name = "omap_uwire",
- .id = -1,
- .num_resources = ARRAY_SIZE(uwire_resources),
- .resource = uwire_resources,
-};
-
-static void omap_init_uwire(void)
-{
- /* FIXME define and use a boot tag; not all boards will be hooking
- * up devices to the microwire controller, and multi-board configs
- * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
- */
-
- /* board-specific code must configure chipselects (only a few
- * are normally used) and SCLK/SDI/SDO (each has two choices).
- */
- (void) platform_device_register(&omap_uwire_device);
-}
-#else
-static inline void omap_init_uwire(void) {}
-#endif
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
- phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
- phys_addr_t paddr;
-
- if (!size)
- return;
-
- paddr = arm_memblock_steal(size, SZ_1M);
- if (!paddr) {
- pr_err("%s: failed to reserve %llx bytes\n",
- __func__, (unsigned long long)size);
- return;
- }
-
- omap_dsp_phys_mempool_base = paddr;
-}
-
-phys_addr_t omap_dsp_get_mempool_base(void)
-{
- return omap_dsp_phys_mempool_base;
-}
-EXPORT_SYMBOL(omap_dsp_get_mempool_base);
-#endif
-
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
@@ -208,7 +87,6 @@
* in alphabetical order so they're easier to sort through.
*/
omap_init_rng();
- omap_init_uwire();
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 987e610..cb16ade 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -852,7 +852,7 @@
}
l = p->dma_read(CCR, lch);
l &= ~((1 << 6) | (1 << 26));
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+ if (cpu_class_is_omap2() && !cpu_is_omap242x())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -2080,7 +2080,7 @@
}
}
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+ if (cpu_class_is_omap2() && !cpu_is_omap242x())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index c4ed35e..3b0cfeb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -82,8 +82,6 @@
static void omap_timer_restore_context(struct omap_dm_timer *timer)
{
- __raw_writel(timer->context.tiocp_cfg,
- timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
if (timer->revision == 1)
__raw_writel(timer->context.tistat, timer->sys_stat);
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index a557b84..d1cb6f5 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -30,7 +30,7 @@
#include <plat/i2c.h>
#include <plat/omap_hwmod.h>
-extern int __init omap_init_clocksource_32k(void);
+extern int __init omap_init_clocksource_32k(void __iomem *vbase);
extern void __init omap_check_revision(void);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 4bdf14e..297245d 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -121,6 +121,7 @@
IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
IS_AM_CLASS(33xx, 0x33)
IS_TI_CLASS(81xx, 0x81)
@@ -148,6 +149,7 @@
#define cpu_is_ti81xx() 0
#define cpu_is_ti816x() 0
#define cpu_is_ti814x() 0
+#define soc_is_am35xx() 0
#define cpu_is_am33xx() 0
#define cpu_is_am335x() 0
#define cpu_is_omap44xx() 0
@@ -357,6 +359,7 @@
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
+# undef soc_is_am35xx
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
@@ -378,6 +381,7 @@
# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_ti814x() is_ti814x()
+# define soc_is_am35xx() is_am35xx()
# define cpu_is_am33xx() is_am33xx()
# define cpu_is_am335x() is_am335x()
#endif
@@ -433,6 +437,10 @@
#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+#define AM35XX_CLASS 0x35170034
+#define AM35XX_REV_ES1_0 AM35XX_CLASS
+#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
+
#define AM335X_CLASS 0x33500034
#define AM335X_REV_ES1_0 AM335X_CLASS
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 42afb4c..c5811d4 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -312,6 +312,11 @@
#define CLEAR_CSR_ON_READ BIT(0xC)
#define IS_WORD_16 BIT(0xD)
+/* Defines for DMA Capabilities */
+#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
+#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19)
+#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20)
+
enum omap_reg_offsets {
GCR, GSCR, GRST1, HW_ID,
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index bdf871a..5da7356 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -75,7 +75,6 @@
struct timer_regs {
u32 tidr;
- u32 tiocp_cfg;
u32 tistat;
u32 tisr;
u32 tier;
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 3e7ae0f..a7754a8 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -177,9 +177,6 @@
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-int omap_mmc_add(const char *name, int id, unsigned long base,
- unsigned long size, unsigned int irq,
- struct omap_mmc_platform_data *data);
#else
static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
@@ -188,12 +185,6 @@
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-static inline int omap_mmc_add(const char *name, int id, unsigned long base,
- unsigned long size, unsigned int irq,
- struct omap_mmc_platform_data *data)
-{
- return 0;
-}
#endif
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 74daf5e..61fd837 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -14,15 +14,41 @@
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
#include <linux/ata_platform.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <net/dsa.h>
-#include <linux/spi/orion_spi.h>
-#include <plat/orion_wdt.h>
#include <plat/mv_xor.h>
#include <plat/ehci-orion.h>
#include <mach/bridge-regs.h>
+/* Create a clkdev entry for a given device/clk */
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+ struct clk *clk)
+{
+ struct clk_lookup *cl;
+
+ cl = clkdev_alloc(clk, con_id, dev_id);
+ if (cl)
+ clkdev_add(cl);
+}
+
+/* Create clkdev entries for all orion platforms except kirkwood.
+ Kirkwood has gated clocks for some of its peripherals, so creates
+ its own clkdev entries. For all the other orion devices, create
+ clkdev entries to the tclk. */
+void __init orion_clkdev_init(struct clk *tclk)
+{
+ orion_clkdev_add(NULL, "orion_spi.0", tclk);
+ orion_clkdev_add(NULL, "orion_spi.1", tclk);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", tclk);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", tclk);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk);
+ orion_clkdev_add(NULL, "orion_wdt", tclk);
+}
+
/* Fill in the resources structure and link it into the platform
device structure. There is always a memory region, and nearly
always an interrupt.*/
@@ -49,6 +75,12 @@
/*****************************************************************************
* UART
****************************************************************************/
+static unsigned long __init uart_get_clk_rate(struct clk *clk)
+{
+ clk_prepare_enable(clk);
+ return clk_get_rate(clk);
+}
+
static void __init uart_complete(
struct platform_device *orion_uart,
struct plat_serial8250_port *data,
@@ -56,12 +88,12 @@
unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk)
+ struct clk *clk)
{
data->mapbase = mapbase;
data->membase = (void __iomem *)membase;
data->irq = irq;
- data->uartclk = uartclk;
+ data->uartclk = uart_get_clk_rate(clk);
orion_uart->dev.platform_data = data;
fill_resources(orion_uart, resources, mapbase, 0xff, irq);
@@ -90,10 +122,10 @@
void __init orion_uart0_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk)
+ struct clk *clk)
{
uart_complete(&orion_uart0, orion_uart0_data, orion_uart0_resources,
- membase, mapbase, irq, uartclk);
+ membase, mapbase, irq, clk);
}
/*****************************************************************************
@@ -118,10 +150,10 @@
void __init orion_uart1_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk)
+ struct clk *clk)
{
uart_complete(&orion_uart1, orion_uart1_data, orion_uart1_resources,
- membase, mapbase, irq, uartclk);
+ membase, mapbase, irq, clk);
}
/*****************************************************************************
@@ -146,10 +178,10 @@
void __init orion_uart2_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk)
+ struct clk *clk)
{
uart_complete(&orion_uart2, orion_uart2_data, orion_uart2_resources,
- membase, mapbase, irq, uartclk);
+ membase, mapbase, irq, clk);
}
/*****************************************************************************
@@ -174,10 +206,10 @@
void __init orion_uart3_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk)
+ struct clk *clk)
{
uart_complete(&orion_uart3, orion_uart3_data, orion_uart3_resources,
- membase, mapbase, irq, uartclk);
+ membase, mapbase, irq, clk);
}
/*****************************************************************************
@@ -203,13 +235,11 @@
****************************************************************************/
static __init void ge_complete(
struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
- int tclk,
struct resource *orion_ge_resource, unsigned long irq,
struct platform_device *orion_ge_shared,
struct mv643xx_eth_platform_data *eth_data,
struct platform_device *orion_ge)
{
- orion_ge_shared_data->t_clk = tclk;
orion_ge_resource->start = irq;
orion_ge_resource->end = irq;
eth_data->shared = orion_ge_shared;
@@ -260,12 +290,11 @@
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk)
+ unsigned long irq_err)
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge00_shared_data, tclk,
+ ge_complete(&orion_ge00_shared_data,
orion_ge00_resources, irq, &orion_ge00_shared,
eth_data, &orion_ge00);
}
@@ -313,12 +342,11 @@
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk)
+ unsigned long irq_err)
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge01_shared_data, tclk,
+ ge_complete(&orion_ge01_shared_data,
orion_ge01_resources, irq, &orion_ge01_shared,
eth_data, &orion_ge01);
}
@@ -366,12 +394,11 @@
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk)
+ unsigned long irq_err)
{
fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge10_shared_data, tclk,
+ ge_complete(&orion_ge10_shared_data,
orion_ge10_resources, irq, &orion_ge10_shared,
eth_data, &orion_ge10);
}
@@ -419,12 +446,11 @@
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk)
+ unsigned long irq_err)
{
fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge11_shared_data, tclk,
+ ge_complete(&orion_ge11_shared_data,
orion_ge11_resources, irq, &orion_ge11_shared,
eth_data, &orion_ge11);
}
@@ -521,44 +547,32 @@
/*****************************************************************************
* SPI
****************************************************************************/
-static struct orion_spi_info orion_spi_plat_data;
static struct resource orion_spi_resources;
static struct platform_device orion_spi = {
.name = "orion_spi",
.id = 0,
- .dev = {
- .platform_data = &orion_spi_plat_data,
- },
};
-static struct orion_spi_info orion_spi_1_plat_data;
static struct resource orion_spi_1_resources;
static struct platform_device orion_spi_1 = {
.name = "orion_spi",
.id = 1,
- .dev = {
- .platform_data = &orion_spi_1_plat_data,
- },
};
/* Note: The SPI silicon core does have interrupts. However the
* current Linux software driver does not use interrupts. */
-void __init orion_spi_init(unsigned long mapbase,
- unsigned long tclk)
+void __init orion_spi_init(unsigned long mapbase)
{
- orion_spi_plat_data.tclk = tclk;
fill_resources(&orion_spi, &orion_spi_resources,
mapbase, SZ_512 - 1, NO_IRQ);
platform_device_register(&orion_spi);
}
-void __init orion_spi_1_init(unsigned long mapbase,
- unsigned long tclk)
+void __init orion_spi_1_init(unsigned long mapbase)
{
- orion_spi_1_plat_data.tclk = tclk;
fill_resources(&orion_spi_1, &orion_spi_1_resources,
mapbase, SZ_512 - 1, NO_IRQ);
platform_device_register(&orion_spi_1);
@@ -567,24 +581,18 @@
/*****************************************************************************
* Watchdog
****************************************************************************/
-static struct orion_wdt_platform_data orion_wdt_data;
-
static struct resource orion_wdt_resource =
DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
- .dev = {
- .platform_data = &orion_wdt_data,
- },
- .resource = &orion_wdt_resource,
.num_resources = 1,
+ .resource = &orion_wdt_resource,
};
-void __init orion_wdt_init(unsigned long tclk)
+void __init orion_wdt_init(void)
{
- orion_wdt_data.tclk = tclk;
platform_device_register(&orion_wdt_device);
}
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index a7fa005..e00fdb2 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -16,22 +16,22 @@
void __init orion_uart0_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk);
+ struct clk *clk);
void __init orion_uart1_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk);
+ struct clk *clk);
void __init orion_uart2_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk);
+ struct clk *clk);
void __init orion_uart3_init(unsigned int membase,
resource_size_t mapbase,
unsigned int irq,
- unsigned int uartclk);
+ struct clk *clk);
void __init orion_rtc_init(unsigned long mapbase,
unsigned long irq);
@@ -39,29 +39,26 @@
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk);
+ unsigned long irq_err);
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk);
+ unsigned long irq_err);
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk);
+ unsigned long irq_err);
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err,
- int tclk);
+ unsigned long irq_err);
void __init orion_ge00_switch_init(struct dsa_platform_data *d,
int irq);
+
void __init orion_i2c_init(unsigned long mapbase,
unsigned long irq,
unsigned long freq_m);
@@ -70,13 +67,11 @@
unsigned long irq,
unsigned long freq_m);
-void __init orion_spi_init(unsigned long mapbase,
- unsigned long tclk);
+void __init orion_spi_init(unsigned long mapbase);
-void __init orion_spi_1_init(unsigned long mapbase,
- unsigned long tclk);
+void __init orion_spi_1_init(unsigned long mapbase);
-void __init orion_wdt_init(unsigned long tclk);
+void __init orion_wdt_init(void);
void __init orion_xor0_init(unsigned long mapbase_low,
unsigned long mapbase_high,
@@ -106,4 +101,9 @@
unsigned long srambase,
unsigned long sram_size,
unsigned long irq);
+
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+ struct clk *clk);
+
+void __init orion_clkdev_init(struct clk *tclk);
#endif
diff --git a/arch/arm/plat-orion/include/plat/orion_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
deleted file mode 100644
index 665c362a..0000000
--- a/arch/arm/plat-orion/include/plat/orion_wdt.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_wdt.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_WDT_H
-#define __PLAT_ORION_WDT_H
-
-struct orion_wdt_platform_data {
- u32 tclk; /* no <linux/clk.h> support yet */
-};
-
-
-#endif
-
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 86dbb5b..f20a321 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -52,12 +52,12 @@
#define PCIE_DEBUG_SOFT_RESET (1<<20)
-u32 __init orion_pcie_dev_id(void __iomem *base)
+u32 orion_pcie_dev_id(void __iomem *base)
{
return readl(base + PCIE_DEV_ID_OFF) >> 16;
}
-u32 __init orion_pcie_rev(void __iomem *base)
+u32 orion_pcie_rev(void __iomem *base)
{
return readl(base + PCIE_DEV_REV_OFF) & 0xff;
}
diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
index abcc36e..5ce8d5e6 100644
--- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
+++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
@@ -44,6 +44,10 @@
/* direct keys */
int direct_key_num;
unsigned int direct_key_map[MAX_DIRECT_KEY_NUM];
+ /* the key output may be low active */
+ int direct_key_low_active;
+ /* give board a chance to choose the start direct key */
+ unsigned int direct_key_mask;
/* rotary encoders 0 */
int enable_rotary0;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 2467b80..9f60549c 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -12,10 +12,7 @@
# Core files
-obj-y += cpu.o
obj-y += irq.o
-obj-y += dev-uart.o
-obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
@@ -23,9 +20,6 @@
# Architecture dependent builds
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += irq-pm.o
-obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C24XX_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
deleted file mode 100644
index 931d26d..0000000
--- a/arch/arm/plat-s3c24xx/clock.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- ** Copyright (C) 2004 ARM Limited.
- ** Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
-{
- clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
- clk_xtal.rate);
-
- clk_mpll.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-}
diff --git a/arch/arm/plat-s3c24xx/dev-uart.c b/arch/arm/plat-s3c24xx/dev-uart.c
deleted file mode 100644
index 9ab22e6..0000000
--- a/arch/arm/plat-s3c24xx/dev-uart.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/dev-uart.c
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX UART resource and platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART0,
- .end = S3C2410_PA_UART0 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart1_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART1,
- .end = S3C2410_PA_UART1 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart2_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART2,
- .end = S3C2410_PA_UART2 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart3_resource[] = {
- [0] = {
- .start = S3C2443_PA_UART3,
- .end = S3C2443_PA_UART3 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
- [0] = {
- .resources = s3c2410_uart0_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
- },
- [1] = {
- .resources = s3c2410_uart1_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
- },
- [2] = {
- .resources = s3c2410_uart2_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
- },
- [3] = {
- .resources = s3c2410_uart3_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
- },
-};
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
deleted file mode 100644
index 96bea32..0000000
--- a/arch/arm/plat-s5p/Kconfig
+++ /dev/null
@@ -1,140 +0,0 @@
-# arch/arm/plat-s5p/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-config PLAT_S5P
- bool
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
- default y
- select ARM_VIC if !ARCH_EXYNOS
- select ARM_GIC if ARCH_EXYNOS
- select GIC_NON_BANKED if ARCH_EXYNOS4
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select S3C_GPIO_TRACK
- select S5P_GPIO_DRVSTR
- select SAMSUNG_GPIOLIB_4BIT
- select PLAT_SAMSUNG
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_VIC_TIMER
- help
- Base platform code for Samsung's S5P series SoC.
-
-config S5P_EXT_INT
- bool
- help
- Use the external interrupts (other than GPIO interrupts.)
- Note: Do not choose this for S5P6440 and S5P6450.
-
-config S5P_GPIO_INT
- bool
- help
- Common code for the GPIO interrupts (other than external interrupts.)
-
-config S5P_HRT
- bool
- select SAMSUNG_DEV_PWM
- help
- Use the High Resolution timer support
-
-config S5P_DEV_UART
- def_bool y
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
-
-config S5P_PM
- bool
- help
- Common code for power management support on S5P and newer SoCs
- Note: Do not select this for S5P6440 and S5P6450.
-
-comment "System MMU"
-
-config S5P_SYSTEM_MMU
- bool "S5P SYSTEM MMU"
- depends on ARCH_EXYNOS4
- help
- Say Y here if you want to enable System MMU
-
-config S5P_SLEEP
- bool
- help
- Internal config node to apply common S5P sleep management code.
- Can be selected by S5P and newer SoCs with similar sleep procedure.
-
-config S5P_DEV_FIMC0
- bool
- help
- Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
- bool
- help
- Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
- bool
- help
- Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
- bool
- help
- Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_JPEG
- bool
- help
- Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_G2D
- bool
- help
- Compile in platform device definitions for G2D device
-
-config S5P_DEV_FIMD0
- bool
- help
- Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_I2C_HDMIPHY
- bool
- help
- Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_MFC
- bool
- help
- Compile in platform device definitions for MFC
-
-config S5P_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_CSIS0
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_TV
- bool
- help
- Compile in platform device definition for TV interface
-
-config S5P_DEV_USB_EHCI
- bool
- help
- Compile in platform device definition for USB EHCI
-
-config S5P_SETUP_MIPIPHY
- bool
- help
- Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
deleted file mode 100644
index 4bd8241..0000000
--- a/arch/arm/plat-s5p/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# arch/arm/plat-s5p/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += clock.o
-obj-y += irq.o
-obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
-obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o
-obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o
-obj-$(CONFIG_S5P_SLEEP) += sleep.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
-
-# devices
-
-obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
-obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
deleted file mode 100644
index c9308db..0000000
--- a/arch/arm/plat-s5p/dev-uart.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-uart.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base S5P UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
- /* Serial port registrations */
-
-static struct resource s5p_uart0_resource[] = {
- [0] = {
- .start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART0,
- .end = IRQ_UART0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart1_resource[] = {
- [0] = {
- .start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART1,
- .end = IRQ_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart2_resource[] = {
- [0] = {
- .start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART2,
- .end = IRQ_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart3_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
- [0] = {
- .start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART3,
- .end = IRQ_UART3,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct resource s5p_uart4_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
- [0] = {
- .start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART4,
- .end = IRQ_UART4,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct resource s5p_uart5_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
- [0] = {
- .start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART5,
- .end = IRQ_UART5,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
- [0] = {
- .resources = s5p_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
- },
- [1] = {
- .resources = s5p_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
- },
- [2] = {
- .resources = s5p_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
- },
- [3] = {
- .resources = s5p_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
- },
- [4] = {
- .resources = s5p_uart4_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart4_resource),
- },
- [5] = {
- .resources = s5p_uart5_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart5_resource),
- },
-};
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
deleted file mode 100644
index c8bec9c..0000000
--- a/arch/arm/plat-s5p/sysmmu.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* linux/arch/arm/plat-s5p/sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <asm/pgtable.h>
-
-#include <mach/map.h>
-#include <mach/regs-sysmmu.h>
-#include <plat/sysmmu.h>
-
-#define CTRL_ENABLE 0x5
-#define CTRL_BLOCK 0x7
-#define CTRL_DISABLE 0x0
-
-static struct device *dev;
-
-static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
- S5P_PAGE_FAULT_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AW_FAULT_ADDR,
- S5P_DEFAULT_SLAVE_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AW_FAULT_ADDR,
- S5P_AW_FAULT_ADDR
-};
-
-static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
- "PAGE FAULT",
- "AR MULTI-HIT FAULT",
- "AW MULTI-HIT FAULT",
- "BUS ERROR",
- "AR SECURITY PROTECTION FAULT",
- "AR ACCESS PROTECTION FAULT",
- "AW SECURITY PROTECTION FAULT",
- "AW ACCESS PROTECTION FAULT"
-};
-
-static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])(
- enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr);
-
-/*
- * If adjacent 2 bits are true, the system MMU is enabled.
- * The system MMU is disabled, otherwise.
- */
-static unsigned long sysmmu_states;
-
-static inline void set_sysmmu_active(sysmmu_ips ips)
-{
- sysmmu_states |= 3 << (ips * 2);
-}
-
-static inline void set_sysmmu_inactive(sysmmu_ips ips)
-{
- sysmmu_states &= ~(3 << (ips * 2));
-}
-
-static inline int is_sysmmu_active(sysmmu_ips ips)
-{
- return sysmmu_states & (3 << (ips * 2));
-}
-
-static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM];
-
-static inline void sysmmu_block(sysmmu_ips ips)
-{
- __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL);
- dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void sysmmu_unblock(sysmmu_ips ips)
-{
- __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
- dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
- __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH);
- dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd)
-{
- if (unlikely(pgd == 0)) {
- pgd = (unsigned long)ZERO_PAGE(0);
- __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */
- } else {
- __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */
- }
-
- __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-
- dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n",
- sysmmu_ips_name[ips], pgd);
- __sysmmu_tlb_invalidate(ips);
-}
-
-void sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr))
-{
- BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM)));
- fault_handlers[ips] = handler;
-}
-
-static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id)
-{
- /* SYSMMU is in blocked when interrupt occurred. */
- unsigned long base = 0;
- sysmmu_ips ips = (sysmmu_ips)dev_id;
- enum S5P_SYSMMU_INTERRUPT_TYPE itype;
-
- itype = (enum S5P_SYSMMU_INTERRUPT_TYPE)
- __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS));
-
- BUG_ON(!((itype >= 0) && (itype < 8)));
-
- dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype],
- sysmmu_ips_name[ips]);
-
- if (fault_handlers[ips]) {
- unsigned long addr;
-
- base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
- addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]);
-
- if (fault_handlers[ips](itype, base, addr)) {
- __raw_writel(1 << itype,
- sysmmusfrs[ips] + S5P_INT_CLEAR);
- dev_notice(dev, "%s from %s is resolved."
- " Retrying translation.\n",
- sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
- } else {
- base = 0;
- }
- }
-
- sysmmu_unblock(ips);
-
- if (!base)
- dev_notice(dev, "%s from %s is not handled.\n",
- sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-
- return IRQ_HANDLED;
-}
-
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd)
-{
- if (is_sysmmu_active(ips)) {
- sysmmu_block(ips);
- __sysmmu_set_ptbase(ips, pgd);
- sysmmu_unblock(ips);
- } else {
- dev_dbg(dev, "%s is disabled. "
- "Skipping initializing page table base.\n",
- sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd)
-{
- if (!is_sysmmu_active(ips)) {
- sysmmu_clk_enable(ips);
-
- __sysmmu_set_ptbase(ips, pgd);
-
- __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-
- set_sysmmu_active(ips);
- dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]);
- } else {
- dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_disable(sysmmu_ips ips)
-{
- if (is_sysmmu_active(ips)) {
- __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
- set_sysmmu_inactive(ips);
- sysmmu_clk_disable(ips);
- dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]);
- } else {
- dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
- if (is_sysmmu_active(ips)) {
- sysmmu_block(ips);
- __sysmmu_tlb_invalidate(ips);
- sysmmu_unblock(ips);
- } else {
- dev_dbg(dev, "%s is disabled. "
- "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]);
- }
-}
-
-static int s5p_sysmmu_probe(struct platform_device *pdev)
-{
- int i, ret;
- struct resource *res, *mem;
-
- dev = &pdev->dev;
-
- for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
- int irq;
-
- sysmmu_clk_init(dev, i);
- sysmmu_clk_disable(i);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- if (!res) {
- dev_err(dev, "Failed to get the resource of %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENODEV;
- goto err_res;
- }
-
- mem = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (!mem) {
- dev_err(dev, "Failed to request the memory region of %s.\n",
- sysmmu_ips_name[i]);
- ret = -EBUSY;
- goto err_res;
- }
-
- sysmmusfrs[i] = ioremap(res->start, resource_size(res));
- if (!sysmmusfrs[i]) {
- dev_err(dev, "Failed to ioremap() for %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENXIO;
- goto err_reg;
- }
-
- irq = platform_get_irq(pdev, i);
- if (irq <= 0) {
- dev_err(dev, "Failed to get the IRQ resource of %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENOENT;
- goto err_map;
- }
-
- if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED,
- pdev->name, (void *)i)) {
- dev_err(dev, "Failed to request IRQ for %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENOENT;
- goto err_map;
- }
- }
-
- return 0;
-
-err_map:
- iounmap(sysmmusfrs[i]);
-err_reg:
- release_mem_region(mem->start, resource_size(mem));
-err_res:
- return ret;
-}
-
-static int s5p_sysmmu_remove(struct platform_device *pdev)
-{
- return 0;
-}
-int s5p_sysmmu_runtime_suspend(struct device *dev)
-{
- return 0;
-}
-
-int s5p_sysmmu_runtime_resume(struct device *dev)
-{
- return 0;
-}
-
-const struct dev_pm_ops s5p_sysmmu_pm_ops = {
- .runtime_suspend = s5p_sysmmu_runtime_suspend,
- .runtime_resume = s5p_sysmmu_runtime_resume,
-};
-
-static struct platform_driver s5p_sysmmu_driver = {
- .probe = s5p_sysmmu_probe,
- .remove = s5p_sysmmu_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "s5p-sysmmu",
- .pm = &s5p_sysmmu_pm_ops,
- }
-};
-
-static int __init s5p_sysmmu_init(void)
-{
- return platform_driver_register(&s5p_sysmmu_driver);
-}
-arch_initcall(s5p_sysmmu_init);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a0ffc77d..a2fae4e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,24 @@
help
Base platform code for all Samsung SoC based systems
+config PLAT_S5P
+ bool
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ default y
+ select ARM_VIC if !ARCH_EXYNOS
+ select ARM_GIC if ARCH_EXYNOS
+ select GIC_NON_BANKED if ARCH_EXYNOS4
+ select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
+ select SAMSUNG_GPIOLIB_4BIT
+ select PLAT_SAMSUNG
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_VIC_TIMER
+ help
+ Base platform code for Samsung's S5P series SoC.
+
if PLAT_SAMSUNG
# boot configurations
@@ -50,6 +68,14 @@
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
+# timer options
+
+config S5P_HRT
+ bool
+ select SAMSUNG_DEV_PWM
+ help
+ Use the High Resolution timer support
+
# clock options
config SAMSUNG_CLKSRC
@@ -58,6 +84,11 @@
Select the clock code for the clksrc implementation
used by newer systems such as the S3C64XX.
+config S5P_CLOCK
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ help
+ Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
+
# options for IRQ support
config SAMSUNG_IRQ_VIC_TIMER
@@ -65,6 +96,22 @@
help
Internal configuration to build the VIC timer interrupt code.
+config S5P_IRQ
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ help
+ Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
+
+config S5P_EXT_INT
+ bool
+ help
+ Use the external interrupts (other than GPIO interrupts.)
+ Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+ bool
+ help
+ Common code for the GPIO interrupts (other than external interrupts.)
+
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
@@ -117,6 +164,12 @@
Internal configuration option to enable the s3c specific gpio
chip tracking if the platform requires it.
+# uart options
+
+config S5P_DEV_UART
+ def_bool y
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
# ADC driver
config S3C_ADC
@@ -274,6 +327,76 @@
help
Compile in platform device definition LCD backlight with PWM Timer
+config S5P_DEV_CSIS0
+ bool
+ help
+ Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+ bool
+ help
+ Compile in platform device definitions for MIPI-CSIS channel 1
+
+config S5P_DEV_FIMC0
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_FIMC3
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 3
+
+config S5P_DEV_FIMD0
+ bool
+ help
+ Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_G2D
+ bool
+ help
+ Compile in platform device definitions for G2D device
+
+config S5P_DEV_I2C_HDMIPHY
+ bool
+ help
+ Compile in platform device definitions for I2C HDMIPHY controller
+
+config S5P_DEV_JPEG
+ bool
+ help
+ Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_MFC
+ bool
+ help
+ Compile in setup memory (init) code for MFC
+
+config S5P_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_TV
+ bool
+ help
+ Compile in platform device definition for TV interface
+
+config S5P_DEV_USB_EHCI
+ bool
+ help
+ Compile in platform device definition for USB EHCI
+
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -281,6 +404,11 @@
Support for exporting the PWM timer blocks via the pwm device
system
+config S5P_SETUP_MIPIPHY
+ bool
+ help
+ Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+
# DMA
config S3C_DMA
@@ -291,7 +419,7 @@
config SAMSUNG_DMADEV
bool
select DMADEVICES
- select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+ select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
CPU_S5P6450 || CPU_S5P6440)
select ARM_AMBA
help
@@ -351,6 +479,18 @@
and above. This code allows a set of interrupt to wakeup-mask
mappings. See <plat/wakeup-mask.h>
+config S5P_PM
+ bool
+ help
+ Common code for power management support on S5P and newer SoCs
+ Note: Do not select this for S5P6440 and S5P6450.
+
+config S5P_SLEEP
+ bool
+ help
+ Internal config node to apply common S5P sleep management code.
+ Can be selected by S5P and newer SoCs with similar sleep procedure.
+
comment "Power Domain"
config SAMSUNG_PD
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 6012366..860b2db 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -13,12 +13,18 @@
obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
+obj-$(CONFIG_S5P_HRT) += s5p-time.o
+
obj-y += clock.o
obj-y += pwm-clock.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
+obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+obj-$(CONFIG_S5P_IRQ) += s5p-irq.o
+obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o
# ADC
@@ -30,9 +36,13 @@
obj-y += devs.o
obj-y += dev-uart.o
+obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
+obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
+obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
+
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
@@ -47,6 +57,9 @@
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
+obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
+
# PD support
obj-$(CONFIG_SAMSUNG_PD) += pd.o
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 787ceac..0721293 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -202,7 +202,7 @@
extern struct bus_type s3c6410_subsys;
extern struct bus_type s5p64x0_subsys;
extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
+extern struct bus_type exynos_subsys;
extern void (*s5pc1xx_idle)(void);
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 2155d4a..61ca2f3 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -133,7 +133,8 @@
extern struct platform_device exynos4_device_pcm2;
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_sysmmu;
+
+extern struct platform_device exynos_device_drm;
extern struct platform_device samsung_asoc_dma;
extern struct platform_device samsung_asoc_idma;
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 0670f37..d384a80 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -90,6 +90,7 @@
DMACH_MIPI_HSI5,
DMACH_MIPI_HSI6,
DMACH_MIPI_HSI7,
+ DMACH_DISP1,
DMACH_MTOM_0,
DMACH_MTOM_1,
DMACH_MTOM_2,
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 1de4b32..8364b4b 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -32,8 +32,10 @@
extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_bpll_div2;
extern struct clk clk_fout_cpll;
extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_mpll_div2;
extern struct clk clk_fout_epll;
extern struct clk clk_fout_dpll;
extern struct clk clk_fout_vpll;
@@ -42,8 +44,10 @@
extern struct clksrc_sources clk_src_apll;
extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_bpll_fout;
extern struct clksrc_sources clk_src_cpll;
extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_mpll_fout;
extern struct clksrc_sources clk_src_epll;
extern struct clksrc_sources clk_src_dpll;
diff --git a/arch/arm/plat-samsung/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h
deleted file mode 100644
index 5fe8ee0..0000000
--- a/arch/arm/plat-samsung/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_SYSMMU_H
-#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
- SYSMMU_PAGEFAULT,
- SYSMMU_AR_MULTIHIT,
- SYSMMU_AW_MULTIHIT,
- SYSMMU_BUSERROR,
- SYSMMU_AR_SECURITY,
- SYSMMU_AR_ACCESS,
- SYSMMU_AW_SECURITY,
- SYSMMU_AW_PROTECTION, /* 7 */
- SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- * SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- * translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- * zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-samsung/s5p-clock.c
similarity index 88%
rename from arch/arm/plat-s5p/clock.c
rename to arch/arm/plat-samsung/s5p-clock.c
index f68a9bb..031a618 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-samsung/s5p-clock.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/clock.c
- *
+/*
* Copyright 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
@@ -68,6 +67,11 @@
.id = -1,
};
+struct clk clk_fout_bpll_div2 = {
+ .name = "fout_bpll_div2",
+ .id = -1,
+};
+
/* CPLL clock output */
struct clk clk_fout_cpll = {
@@ -83,6 +87,11 @@
.id = -1,
};
+struct clk clk_fout_mpll_div2 = {
+ .name = "fout_mpll_div2",
+ .id = -1,
+};
+
/* EPLL clock output */
struct clk clk_fout_epll = {
.name = "fout_epll",
@@ -126,6 +135,16 @@
.nr_sources = ARRAY_SIZE(clk_src_bpll_list),
};
+static struct clk *clk_src_bpll_fout_list[] = {
+ [0] = &clk_fout_bpll_div2,
+ [1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll_fout = {
+ .sources = clk_src_bpll_fout_list,
+ .nr_sources = ARRAY_SIZE(clk_src_bpll_fout_list),
+};
+
/* Possible clock sources for CPLL Mux */
static struct clk *clk_src_cpll_list[] = {
[0] = &clk_fin_cpll,
@@ -148,6 +167,16 @@
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
+static struct clk *clk_src_mpll_fout_list[] = {
+ [0] = &clk_fout_mpll_div2,
+ [1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll_fout = {
+ .sources = clk_src_mpll_fout_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_fout_list),
+};
+
/* Possible clock sources for EPLL Mux */
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,
diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
similarity index 97%
rename from arch/arm/plat-s5p/dev-mfc.c
rename to arch/arm/plat-samsung/s5p-dev-mfc.c
index a30d36b..ad60894 100644
--- a/arch/arm/plat-s5p/dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/dev-mfc.c
- *
+/*
* Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
*
* Base S5P MFC resource and device definitions
@@ -9,7 +8,6 @@
* published by the Free Software Foundation.
*/
-
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/plat-samsung/s5p-dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c
new file mode 100644
index 0000000..cafa3de
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-dev-uart.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART0),
+};
+
+static struct resource s5p_uart1_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART1),
+};
+
+static struct resource s5p_uart2_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART2),
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+ [0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART3),
+#endif
+};
+
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+ [0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART4),
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+ [0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART5),
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s5p_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
+ },
+ [1] = {
+ .resources = s5p_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
+ },
+ [2] = {
+ .resources = s5p_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
+ },
+ [3] = {
+ .resources = s5p_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
+ },
+ [4] = {
+ .resources = s5p_uart4_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart4_resource),
+ },
+ [5] = {
+ .resources = s5p_uart5_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart5_resource),
+ },
+};
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
similarity index 98%
rename from arch/arm/plat-s5p/irq-eint.c
rename to arch/arm/plat-samsung/s5p-irq-eint.c
index 139c050..33bd3f3 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-samsung/s5p-irq-eint.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/irq-eint.c
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c
similarity index 98%
rename from arch/arm/plat-s5p/irq-gpioint.c
rename to arch/arm/plat-samsung/s5p-irq-gpioint.c
index 82c7311..f9431fe 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/irq-gpioint.c
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Author: Kyungmin Park <kyungmin.park@samsung.com>
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
similarity index 97%
rename from arch/arm/plat-s5p/irq-pm.c
rename to arch/arm/plat-samsung/s5p-irq-pm.c
index d1bfeca..7c1e3b7 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-samsung/s5p-irq-pm.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/irq-pm.c
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-samsung/s5p-irq.c
similarity index 95%
rename from arch/arm/plat-s5p/irq.c
rename to arch/arm/plat-samsung/s5p-irq.c
index afdaa10..dfb47d6 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s5p/irq.c
- *
+/*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-samsung/s5p-pm.c
similarity index 95%
rename from arch/arm/plat-s5p/pm.c
rename to arch/arm/plat-samsung/s5p-pm.c
index d15dc47..0747468 100644
--- a/arch/arm/plat-s5p/pm.c
+++ b/arch/arm/plat-samsung/s5p-pm.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/pm.c
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
similarity index 97%
rename from arch/arm/plat-s5p/sleep.S
rename to arch/arm/plat-samsung/s5p-sleep.S
index 006bd01..bdf6dad 100644
--- a/arch/arm/plat-s5p/sleep.S
+++ b/arch/arm/plat-samsung/s5p-sleep.S
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
+/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c
similarity index 99%
rename from arch/arm/plat-s5p/s5p-time.c
rename to arch/arm/plat-samsung/s5p-time.c
index 17c0a2c..028b6e87 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-samsung/s5p-time.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/s5p-time.c
- *
+/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
diff --git a/arch/arm/plat-s5p/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
similarity index 100%
rename from arch/arm/plat-s5p/setup-mipiphy.c
rename to arch/arm/plat-samsung/setup-mipiphy.c
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 387655b..4404f82 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -8,6 +8,17 @@
prompt "ST SPEAr Family"
default ARCH_SPEAR3XX
+config ARCH_SPEAR13XX
+ bool "ST SPEAr13xx with Device Tree"
+ select ARM_GIC
+ select CPU_V7
+ select USE_OF
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
+ select PINCTRL
+ help
+ Supports for ARM's SPEAR13XX family
+
config ARCH_SPEAR3XX
bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
@@ -27,6 +38,7 @@
endchoice
# Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear13xx/Kconfig"
source "arch/arm/mach-spear3xx/Kconfig"
source "arch/arm/mach-spear6xx/Kconfig"
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 7744802c..2607bd0 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,7 @@
#
# Common support
-obj-y := clock.o restart.o time.o pl080.o
+obj-y := restart.o time.o
-obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o shirq.o
+obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
deleted file mode 100644
index 67dd003..0000000
--- a/arch/arm/plat-spear/clock.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
- unsigned int val;
-
- if (!clk->en_reg)
- return -EFAULT;
-
- val = readl(clk->en_reg);
- if (unlikely(clk->flags & RESET_TO_ENABLE))
- val &= ~(1 << clk->en_reg_bit);
- else
- val |= 1 << clk->en_reg_bit;
-
- writel(val, clk->en_reg);
-
- return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
- unsigned int val;
-
- if (!clk->en_reg)
- return;
-
- val = readl(clk->en_reg);
- if (unlikely(clk->flags & RESET_TO_ENABLE))
- val |= 1 << clk->en_reg_bit;
- else
- val &= ~(1 << clk->en_reg_bit);
-
- writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
- .enable = generic_clk_enable,
- .disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
- unsigned int val, i;
- struct pclk_info *info = NULL;
-
- val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
- & clk->pclk_sel->pclk_sel_mask;
-
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk_val == val)
- info = &clk->pclk_sel->pclk_info[i];
- }
-
- return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- list_del(&clk->sibling);
- list_add(&clk->sibling, &pclk_info->pclk->children);
-
- clk->pclk = pclk_info->pclk;
- spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
- clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- if (!clk->usage_count) {
- WARN_ON(1);
- return;
- }
-
- clk->usage_count--;
-
- if (clk->usage_count == 0) {
- /*
- * Surely, there are no active childrens or direct users
- * of this clock
- */
- if (clk->pclk)
- do_clk_disable(clk->pclk);
-
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- }
-}
-
-static int do_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EFAULT;
-
- if (clk->usage_count == 0) {
- if (clk->pclk) {
- ret = do_clk_enable(clk->pclk);
- if (ret)
- goto err;
- }
- if (clk->ops && clk->ops->enable) {
- ret = clk->ops->enable(clk);
- if (ret) {
- if (clk->pclk)
- do_clk_disable(clk->pclk);
- goto err;
- }
- }
- /*
- * Since the clock is going to be used for the first
- * time please reclac
- */
- if (clk->recalc) {
- ret = clk->recalc(clk);
- if (ret)
- goto err;
- }
- }
- clk->usage_count++;
-err:
- return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&clocks_lock, flags);
- ret = do_clk_enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- do_clk_disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- * This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags, rate;
-
- spin_lock_irqsave(&clocks_lock, flags);
- rate = clk->rate;
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int i, found = 0, val = 0;
- unsigned long flags;
-
- if (!clk || !parent)
- return -EFAULT;
- if (clk->pclk == parent)
- return 0;
- if (!clk->pclk_sel)
- return -EPERM;
-
- /* check if requested parent is in clk parent list */
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk == parent) {
- found = 1;
- break;
- }
- }
-
- if (!found)
- return -EINVAL;
-
- spin_lock_irqsave(&clocks_lock, flags);
- /* reflect parent change in hardware */
- val = readl(clk->pclk_sel->pclk_sel_reg);
- val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
- val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
- writel(val, clk->pclk_sel->pclk_sel_reg);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- /* reflect parent change in software */
- clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
- propagate_rate(clk, 0);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!clk || !rate)
- return -EFAULT;
-
- if (clk->set_rate) {
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->set_rate(clk, rate);
- if (!ret)
- /* if successful -> propagate */
- propagate_rate(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
- } else if (clk->pclk) {
- u32 mult = clk->div_factor ? clk->div_factor : 1;
- ret = clk_set_rate(clk->pclk, mult * rate);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
- struct clk *clk;
- unsigned long flags;
-
- if (!cl || !cl->clk)
- return;
- clk = cl->clk;
-
- spin_lock_irqsave(&clocks_lock, flags);
-
- INIT_LIST_HEAD(&clk->children);
- if (clk->flags & ALWAYS_ENABLED)
- clk->ops = NULL;
- else if (!clk->ops)
- clk->ops = &generic_clkops;
-
- /* root clock don't have any parents */
- if (!clk->pclk && !clk->pclk_sel) {
- list_add(&clk->sibling, &root_clks);
- } else if (clk->pclk && !clk->pclk_sel) {
- /* add clocks with only one parent to parent's children list */
- list_add(&clk->sibling, &clk->pclk->children);
- } else {
- /* clocks with more than one parent */
- struct pclk_info *pclk_info;
-
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- pr_err("CLKDEV: invalid pclk info of clk with"
- " %s dev_id and %s con_id\n",
- cl->dev_id, cl->con_id);
- } else {
- clk->pclk = pclk_info->pclk;
- list_add(&clk->sibling, &pclk_info->pclk->children);
- }
- }
-
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- /* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
- list_add(&clk->node, &clocks);
- clk->cl = cl;
-#endif
-
- /* add clock to arm clockdev framework */
- clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
- struct clk *clk, *_temp;
- int ret = 0;
-
- list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
- if (clk->recalc) {
- ret = clk->recalc(clk);
- /*
- * recalc will return error if clk out is not programmed
- * In this case configure default rate.
- */
- if (ret && clk->set_rate)
- clk->set_rate(clk, 0);
- }
- propagate_rate(clk, on_init);
-
- if (!on_init)
- continue;
-
- /* Enable clks enabled on init, in software view */
- if (clk->flags & ENABLED_ON_INIT)
- do_clk_enable(clk);
- }
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
- unsigned long tmp = 0, prev_rate = 0;
- int index;
-
- if (!clk->calc_rate)
- return -EFAULT;
-
- if (!drate)
- return -EINVAL;
-
- /*
- * This loops ends on two conditions:
- * - as soon as clk is found with rate greater than requested rate.
- * - if all clks in rate_config are smaller than requested rate.
- */
- for (index = 0; index < clk->rate_config.count; index++) {
- prev_rate = tmp;
- tmp = clk->calc_rate(clk, index);
- if (drate < tmp) {
- index--;
- break;
- }
- }
- /* return if can't find suitable clock */
- if (index < 0) {
- index = -EINVAL;
- *rate = 0;
- } else if (index == clk->rate_config.count) {
- /* program with highest clk rate possible */
- index = clk->rate_config.count - 1;
- *rate = tmp;
- } else
- *rate = prev_rate;
-
- return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
- long rate = 0;
- int index;
-
- /*
- * propagate call to parent who supports calc_rate. Similar approach is
- * used in clk_set_rate.
- */
- if (!clk->calc_rate) {
- u32 mult;
- if (!clk->pclk)
- return clk->rate;
-
- mult = clk->div_factor ? clk->div_factor : 1;
- return clk_round_rate(clk->pclk, mult * drate) / mult;
- }
-
- index = round_rate_index(clk, drate, &rate);
- if (index >= 0)
- return rate;
- else
- return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct pll_rate_tbl *tbls = clk->rate_config.tbls;
- unsigned int mode;
-
- mode = tbls[index].mode ? 256 : 1;
- return (((2 * rate / 10000) * tbls[index].m) /
- (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
- struct pll_clk_config *config = clk->private_data;
- unsigned int num = 2, den = 0, val, mode = 0;
-
- mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
- config->masks->mode_mask;
-
- val = readl(config->cfg_reg);
- /* calculate denominator */
- den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
- den = 1 << den;
- den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
- /* calculate numerator & denominator */
- if (!mode) {
- /* Normal mode */
- num *= (val >> config->masks->norm_fdbk_m_shift) &
- config->masks->norm_fdbk_m_mask;
- } else {
- /* Dithered mode */
- num *= (val >> config->masks->dith_fdbk_m_shift) &
- config->masks->dith_fdbk_m_mask;
- den *= 256;
- }
-
- if (!den)
- return -EINVAL;
-
- clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct pll_rate_tbl *tbls = clk->rate_config.tbls;
- struct pll_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->mode_reg) &
- ~(config->masks->mode_mask << config->masks->mode_shift);
- val |= (tbls[i].mode & config->masks->mode_mask) <<
- config->masks->mode_shift;
- writel(val, config->mode_reg);
-
- val = readl(config->cfg_reg) &
- ~(config->masks->div_p_mask << config->masks->div_p_shift);
- val |= (tbls[i].p & config->masks->div_p_mask) <<
- config->masks->div_p_shift;
- val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
- val |= (tbls[i].n & config->masks->div_n_mask) <<
- config->masks->div_n_shift;
- val &= ~(config->masks->dith_fdbk_m_mask <<
- config->masks->dith_fdbk_m_shift);
- if (tbls[i].mode)
- val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
- config->masks->dith_fdbk_m_shift;
- else
- val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
- config->masks->norm_fdbk_m_shift;
-
- writel(val, config->cfg_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
- return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
- struct bus_clk_config *config = clk->private_data;
- unsigned int div;
-
- div = ((readl(config->reg) >> config->masks->shift) &
- config->masks->mask) + 1;
-
- if (!div)
- return -EINVAL;
-
- clk->rate = (unsigned long)clk->pclk->rate / div;
- return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct bus_rate_tbl *tbls = clk->rate_config.tbls;
- struct bus_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->reg) &
- ~(config->masks->mask << config->masks->shift);
- val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
- writel(val, config->reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2 EQ1
- * Fout2 = Fin * X/Y EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct aux_rate_tbl *tbls = clk->rate_config.tbls;
- u8 eq = tbls[index].eq ? 1 : 2;
-
- return (((rate/10000) * tbls[index].xscale) /
- (tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
- struct aux_clk_config *config = clk->private_data;
- unsigned int num = 1, den = 1, val, eqn;
-
- val = readl(config->synth_reg);
-
- eqn = (val >> config->masks->eq_sel_shift) &
- config->masks->eq_sel_mask;
- if (eqn == config->masks->eq1_mask)
- den *= 2;
-
- /* calculate numerator */
- num = (val >> config->masks->xscale_sel_shift) &
- config->masks->xscale_sel_mask;
-
- /* calculate denominator */
- den *= (val >> config->masks->yscale_sel_shift) &
- config->masks->yscale_sel_mask;
-
- if (!den)
- return -EINVAL;
-
- clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct aux_rate_tbl *tbls = clk->rate_config.tbls;
- struct aux_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) &
- ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
- val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
- config->masks->eq_sel_shift;
- val &= ~(config->masks->xscale_sel_mask <<
- config->masks->xscale_sel_shift);
- val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
- config->masks->xscale_sel_shift;
- val &= ~(config->masks->yscale_sel_mask <<
- config->masks->yscale_sel_shift);
- val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
- config->masks->yscale_sel_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
- return rate / ((1 << (tbls[index].nscale + 1)) *
- (tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
- struct gpt_clk_config *config = clk->private_data;
- unsigned int div = 1, val;
-
- val = readl(config->synth_reg);
- div += (val >> config->masks->mscale_sel_shift) &
- config->masks->mscale_sel_mask;
- div *= 1 << (((val >> config->masks->nscale_sel_shift) &
- config->masks->nscale_sel_mask) + 1);
-
- if (!div)
- return -EINVAL;
-
- clk->rate = (unsigned long)clk->pclk->rate / div;
- return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
- struct gpt_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
- config->masks->mscale_sel_shift);
- val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
- config->masks->mscale_sel_shift;
- val &= ~(config->masks->nscale_sel_mask <<
- config->masks->nscale_sel_shift);
- val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
- config->masks->nscale_sel_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- * 0-13 (fractional part)
- * 14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
- rate /= 1000;
- rate <<= 12;
- rate /= (2 * tbls[index].div);
- rate >>= 12;
- rate *= 1000;
-
- return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- * 0-13 (fractional part)
- * 14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
- struct clcd_clk_config *config = clk->private_data;
- unsigned int div = 1;
- unsigned long prate;
- unsigned int val;
-
- val = readl(config->synth_reg);
- div = (val >> config->masks->div_factor_shift) &
- config->masks->div_factor_mask;
-
- if (!div)
- return -EINVAL;
-
- prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
- clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
- clk->rate *= 1000;
- return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
- struct clcd_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
- config->masks->div_factor_shift);
- val |= (tbls[i].div & config->masks->div_factor_mask) <<
- config->masks->div_factor_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
- unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
- clk->rate = clk->pclk->rate/div_factor;
- return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
- struct clk *pclk;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&clocks_lock, flags);
- list_for_each_entry(pclk, &root_clks, sibling) {
- if (pclk->recalc) {
- ret = pclk->recalc(pclk);
- /*
- * recalc will return error if clk out is not programmed
- * In this case configure default clock.
- */
- if (ret && pclk->set_rate)
- pclk->set_rate(pclk, 0);
- }
- propagate_rate(pclk, 1);
- /* Enable clks enabled on init, in software view */
- if (pclk->flags & ENABLED_ON_INIT)
- do_clk_enable(pclk);
- }
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
- recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->pclk;
- char s[255];
- char *p = s;
-
- if (c) {
- if (c->cl->con_id)
- p += sprintf(p, "%s", c->cl->con_id);
- if (c->cl->dev_id)
- p += sprintf(p, "%s", c->cl->dev_id);
- }
- d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
- (u32 *)&c->usage_count);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->pclk;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
- debugfs_remove(c->dent);
- return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
deleted file mode 100644
index 0062baf..0000000
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
-#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
-#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
- int (*enable) (struct clk *);
- void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
- struct clk *pclk;
- u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
- struct pclk_info *pclk_info;
- u8 pclk_count;
- void __iomem *pclk_sel_reg;
- unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
- void *tbls;
- u8 count;
- u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
- unsigned int usage_count;
- unsigned int flags;
- unsigned long rate;
- void __iomem *en_reg;
- u8 en_reg_bit;
- const struct clkops *ops;
- int (*recalc) (struct clk *);
- int (*set_rate) (struct clk *, unsigned long rate);
- unsigned long (*calc_rate)(struct clk *, int index);
- struct rate_config rate_config;
- unsigned int div_factor;
-
- struct clk *pclk;
- struct pclk_sel *pclk_sel;
- unsigned int pclk_sel_shift;
-
- struct list_head children;
- struct list_head sibling;
- void *private_data;
-#ifdef CONFIG_DEBUG_FS
- struct list_head node;
- struct clk_lookup *cl;
- struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
- u32 mode_mask;
- u32 mode_shift;
-
- u32 norm_fdbk_m_mask;
- u32 norm_fdbk_m_shift;
- u32 dith_fdbk_m_mask;
- u32 dith_fdbk_m_shift;
- u32 div_p_mask;
- u32 div_p_shift;
- u32 div_n_mask;
- u32 div_n_shift;
-};
-
-struct pll_clk_config {
- void __iomem *mode_reg;
- void __iomem *cfg_reg;
- struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
- u8 mode;
- u16 m;
- u8 n;
- u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
- u32 mask;
- u32 shift;
-};
-
-struct bus_clk_config {
- void __iomem *reg;
- struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
- u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
- u32 eq_sel_mask;
- u32 eq_sel_shift;
- u32 eq1_mask;
- u32 eq2_mask;
- u32 xscale_sel_mask;
- u32 xscale_sel_shift;
- u32 yscale_sel_mask;
- u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
- void __iomem *synth_reg;
- struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
- u16 xscale;
- u16 yscale;
- u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
- u32 mscale_sel_mask;
- u32 mscale_sel_shift;
- u32 nscale_sel_mask;
- u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
- void __iomem *synth_reg;
- struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
- u16 mscale;
- u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
- u32 div_factor_mask;
- u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
- void __iomem *synth_reg;
- struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
- u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 4471a23..ea0a613 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -16,6 +16,7 @@
#include <mach/spear.h>
#include <mach/generic.h>
+#define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204)
void spear_restart(char mode, const char *cmd)
{
if (mode == 's') {
@@ -23,6 +24,10 @@
soft_restart(0);
} else {
/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+ writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#else
sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
}
}
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index a3164d1..03321af 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -18,6 +18,8 @@
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
@@ -197,19 +199,32 @@
setup_irq(irq, &spear_timer_irq);
}
-void __init spear_setup_timer(resource_size_t base, int irq)
-{
- int ret;
+const static struct of_device_id timer_of_match[] __initconst = {
+ { .compatible = "st,spear-timer", },
+ { },
+};
- if (!request_mem_region(base, SZ_1K, "gpt0")) {
- pr_err("%s:cannot get IO addr\n", __func__);
+void __init spear_setup_of_timer(void)
+{
+ struct device_node *np;
+ int irq, ret;
+
+ np = of_find_matching_node(NULL, timer_of_match);
+ if (!np) {
+ pr_err("%s: No timer passed via DT\n", __func__);
return;
}
- gpt_base = ioremap(base, SZ_1K);
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("%s: No irq passed for timer via DT\n", __func__);
+ return;
+ }
+
+ gpt_base = of_iomap(np, 0);
if (!gpt_base) {
- pr_err("%s:ioremap failed for gpt\n", __func__);
- goto err_mem;
+ pr_err("%s: of iomap failed\n", __func__);
+ return;
}
gpt_clk = clk_get_sys("gpt0", NULL);
@@ -218,10 +233,10 @@
goto err_iomap;
}
- ret = clk_enable(gpt_clk);
+ ret = clk_prepare_enable(gpt_clk);
if (ret < 0) {
- pr_err("%s:couldn't enable gpt clock\n", __func__);
- goto err_clk;
+ pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
+ goto err_prepare_enable_clk;
}
spear_clockevent_init(irq);
@@ -229,10 +244,8 @@
return;
-err_clk:
+err_prepare_enable_clk:
clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
-err_mem:
- release_mem_region(base, SZ_1K);
}
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 7e283c8..fe0d609 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -119,6 +119,7 @@
sdhc@2e000 {
status = "disabled";
sdhci,1-bit-only;
+ bus-width = <1>;
};
par_io@e0100 {
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 6ad6219..fe12881 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -48,6 +48,14 @@
config SYS_SUPPORTS_HUGETLBFS
def_bool y
+# Support for additional huge page sizes besides HPAGE_SIZE.
+# The software support is currently only present in the TILE-Gx
+# hypervisor. TILEPro in any case does not support page sizes
+# larger than the default HPAGE_SIZE.
+config HUGETLB_SUPER_PAGES
+ depends on HUGETLB_PAGE && TILEGX
+ def_bool y
+
# FIXME: tilegx can implement a more efficient rwsem.
config RWSEM_GENERIC_SPINLOCK
def_bool y
@@ -107,16 +115,14 @@
select HVC_DRIVER
def_bool y
-# Please note: TILE-Gx support is not yet finalized; this is
-# the preliminary support. TILE-Gx drivers are only provided
-# with the alpha or beta test versions for Tilera customers.
config TILEGX
- depends on EXPERIMENTAL
bool "Building with TILE-Gx (64-bit) compiler and toolchain"
+config TILEPRO
+ def_bool !TILEGX
+
config 64BIT
- depends on TILEGX
- def_bool y
+ def_bool TILEGX
config ARCH_DEFCONFIG
string
@@ -137,6 +143,31 @@
smaller kernel memory footprint results from using a smaller
value on chips with fewer tiles.
+if TILEGX
+
+choice
+ prompt "Kernel page size"
+ default PAGE_SIZE_64KB
+ help
+ This lets you select the page size of the kernel. For best
+ performance on memory-intensive applications, a page size of 64KB
+ is recommended. For workloads involving many small files, many
+ connections, etc., it may be better to select 16KB, which uses
+ memory more efficiently at some cost in TLB performance.
+
+ Note that this option is TILE-Gx specific; currently
+ TILEPro page size is set by rebuilding the hypervisor.
+
+config PAGE_SIZE_16KB
+ bool "16KB"
+
+config PAGE_SIZE_64KB
+ bool "64KB"
+
+endchoice
+
+endif
+
source "kernel/Kconfig.hz"
config KEXEC
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
index 9520bc5..e20b0a0 100644
--- a/arch/tile/Makefile
+++ b/arch/tile/Makefile
@@ -34,7 +34,12 @@
$(shell $(CC) $(KBUILD_CFLAGS) $(KCFLAGS) -print-libgcc-file-name)
# Provide the path to use for "make defconfig".
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
+# We default to the newer TILE-Gx architecture if only "tile" is given.
+ifeq ($(ARCH),tile)
+ KBUILD_DEFCONFIG := tilegx_defconfig
+else
+ KBUILD_DEFCONFIG := $(ARCH)_defconfig
+endif
# Used as a file extension when useful, e.g. head_$(BITS).o
# Not needed for (e.g.) "$(CC) -m32" since the compiler automatically
diff --git a/arch/tile/include/arch/spr_def_32.h b/arch/tile/include/arch/spr_def_32.h
index bbc1f4c..78bbce2 100644
--- a/arch/tile/include/arch/spr_def_32.h
+++ b/arch/tile/include/arch/spr_def_32.h
@@ -65,6 +65,31 @@
#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4
#define SPR_FAIL 0x4e09
+#define SPR_IDN_AVAIL_EN 0x3e05
+#define SPR_IDN_CA_DATA 0x0b00
+#define SPR_IDN_DATA_AVAIL 0x0b03
+#define SPR_IDN_DEADLOCK_TIMEOUT 0x3406
+#define SPR_IDN_DEMUX_CA_COUNT 0x0a05
+#define SPR_IDN_DEMUX_COUNT_0 0x0a06
+#define SPR_IDN_DEMUX_COUNT_1 0x0a07
+#define SPR_IDN_DEMUX_CTL 0x0a08
+#define SPR_IDN_DEMUX_QUEUE_SEL 0x0a0a
+#define SPR_IDN_DEMUX_STATUS 0x0a0b
+#define SPR_IDN_DEMUX_WRITE_FIFO 0x0a0c
+#define SPR_IDN_DIRECTION_PROTECT 0x2e05
+#define SPR_IDN_PENDING 0x0a0e
+#define SPR_IDN_REFILL_EN 0x0e05
+#define SPR_IDN_SP_FIFO_DATA 0x0a0f
+#define SPR_IDN_SP_FIFO_SEL 0x0a10
+#define SPR_IDN_SP_FREEZE 0x0a11
+#define SPR_IDN_SP_FREEZE__SP_FRZ_MASK 0x1
+#define SPR_IDN_SP_FREEZE__DEMUX_FRZ_MASK 0x2
+#define SPR_IDN_SP_FREEZE__NON_DEST_EXT_MASK 0x4
+#define SPR_IDN_SP_STATE 0x0a12
+#define SPR_IDN_TAG_0 0x0a13
+#define SPR_IDN_TAG_1 0x0a14
+#define SPR_IDN_TAG_VALID 0x0a15
+#define SPR_IDN_TILE_COORD 0x0a16
#define SPR_INTCTRL_0_STATUS 0x4a07
#define SPR_INTCTRL_1_STATUS 0x4807
#define SPR_INTCTRL_2_STATUS 0x4607
@@ -87,12 +112,36 @@
#define SPR_INTERRUPT_MASK_SET_1_1 0x480e
#define SPR_INTERRUPT_MASK_SET_2_0 0x460c
#define SPR_INTERRUPT_MASK_SET_2_1 0x460d
+#define SPR_MPL_AUX_PERF_COUNT_SET_0 0x6000
+#define SPR_MPL_AUX_PERF_COUNT_SET_1 0x6001
+#define SPR_MPL_AUX_PERF_COUNT_SET_2 0x6002
#define SPR_MPL_DMA_CPL_SET_0 0x5800
#define SPR_MPL_DMA_CPL_SET_1 0x5801
#define SPR_MPL_DMA_CPL_SET_2 0x5802
#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
#define SPR_MPL_DMA_NOTIFY_SET_2 0x3802
+#define SPR_MPL_IDN_ACCESS_SET_0 0x0a00
+#define SPR_MPL_IDN_ACCESS_SET_1 0x0a01
+#define SPR_MPL_IDN_ACCESS_SET_2 0x0a02
+#define SPR_MPL_IDN_AVAIL_SET_0 0x3e00
+#define SPR_MPL_IDN_AVAIL_SET_1 0x3e01
+#define SPR_MPL_IDN_AVAIL_SET_2 0x3e02
+#define SPR_MPL_IDN_CA_SET_0 0x3a00
+#define SPR_MPL_IDN_CA_SET_1 0x3a01
+#define SPR_MPL_IDN_CA_SET_2 0x3a02
+#define SPR_MPL_IDN_COMPLETE_SET_0 0x1200
+#define SPR_MPL_IDN_COMPLETE_SET_1 0x1201
+#define SPR_MPL_IDN_COMPLETE_SET_2 0x1202
+#define SPR_MPL_IDN_FIREWALL_SET_0 0x2e00
+#define SPR_MPL_IDN_FIREWALL_SET_1 0x2e01
+#define SPR_MPL_IDN_FIREWALL_SET_2 0x2e02
+#define SPR_MPL_IDN_REFILL_SET_0 0x0e00
+#define SPR_MPL_IDN_REFILL_SET_1 0x0e01
+#define SPR_MPL_IDN_REFILL_SET_2 0x0e02
+#define SPR_MPL_IDN_TIMER_SET_0 0x3400
+#define SPR_MPL_IDN_TIMER_SET_1 0x3401
+#define SPR_MPL_IDN_TIMER_SET_2 0x3402
#define SPR_MPL_INTCTRL_0_SET_0 0x4a00
#define SPR_MPL_INTCTRL_0_SET_1 0x4a01
#define SPR_MPL_INTCTRL_0_SET_2 0x4a02
@@ -102,6 +151,9 @@
#define SPR_MPL_INTCTRL_2_SET_0 0x4600
#define SPR_MPL_INTCTRL_2_SET_1 0x4601
#define SPR_MPL_INTCTRL_2_SET_2 0x4602
+#define SPR_MPL_PERF_COUNT_SET_0 0x4200
+#define SPR_MPL_PERF_COUNT_SET_1 0x4201
+#define SPR_MPL_PERF_COUNT_SET_2 0x4202
#define SPR_MPL_SN_ACCESS_SET_0 0x0800
#define SPR_MPL_SN_ACCESS_SET_1 0x0801
#define SPR_MPL_SN_ACCESS_SET_2 0x0802
@@ -181,6 +233,7 @@
#define SPR_UDN_DEMUX_STATUS 0x0c0d
#define SPR_UDN_DEMUX_WRITE_FIFO 0x0c0e
#define SPR_UDN_DIRECTION_PROTECT 0x3005
+#define SPR_UDN_PENDING 0x0c10
#define SPR_UDN_REFILL_EN 0x1005
#define SPR_UDN_SP_FIFO_DATA 0x0c11
#define SPR_UDN_SP_FIFO_SEL 0x0c12
@@ -195,6 +248,9 @@
#define SPR_UDN_TAG_3 0x0c18
#define SPR_UDN_TAG_VALID 0x0c19
#define SPR_UDN_TILE_COORD 0x0c1a
+#define SPR_WATCH_CTL 0x4209
+#define SPR_WATCH_MASK 0x420a
+#define SPR_WATCH_VAL 0x420b
#endif /* !defined(__ARCH_SPR_DEF_H__) */
diff --git a/arch/tile/include/arch/spr_def_64.h b/arch/tile/include/arch/spr_def_64.h
index cd3e5f9..0da86fa 100644
--- a/arch/tile/include/arch/spr_def_64.h
+++ b/arch/tile/include/arch/spr_def_64.h
@@ -52,6 +52,13 @@
#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4
#define SPR_FAIL 0x2707
+#define SPR_IDN_AVAIL_EN 0x1a05
+#define SPR_IDN_DATA_AVAIL 0x0a80
+#define SPR_IDN_DEADLOCK_TIMEOUT 0x1806
+#define SPR_IDN_DEMUX_COUNT_0 0x0a05
+#define SPR_IDN_DEMUX_COUNT_1 0x0a06
+#define SPR_IDN_DIRECTION_PROTECT 0x1405
+#define SPR_IDN_PENDING 0x0a08
#define SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK 0x1
#define SPR_INTCTRL_0_STATUS 0x2505
#define SPR_INTCTRL_1_STATUS 0x2405
@@ -88,9 +95,27 @@
#define SPR_IPI_MASK_SET_0 0x1f0a
#define SPR_IPI_MASK_SET_1 0x1e0a
#define SPR_IPI_MASK_SET_2 0x1d0a
+#define SPR_MPL_AUX_PERF_COUNT_SET_0 0x2100
+#define SPR_MPL_AUX_PERF_COUNT_SET_1 0x2101
+#define SPR_MPL_AUX_PERF_COUNT_SET_2 0x2102
#define SPR_MPL_AUX_TILE_TIMER_SET_0 0x1700
#define SPR_MPL_AUX_TILE_TIMER_SET_1 0x1701
#define SPR_MPL_AUX_TILE_TIMER_SET_2 0x1702
+#define SPR_MPL_IDN_ACCESS_SET_0 0x0a00
+#define SPR_MPL_IDN_ACCESS_SET_1 0x0a01
+#define SPR_MPL_IDN_ACCESS_SET_2 0x0a02
+#define SPR_MPL_IDN_AVAIL_SET_0 0x1a00
+#define SPR_MPL_IDN_AVAIL_SET_1 0x1a01
+#define SPR_MPL_IDN_AVAIL_SET_2 0x1a02
+#define SPR_MPL_IDN_COMPLETE_SET_0 0x0500
+#define SPR_MPL_IDN_COMPLETE_SET_1 0x0501
+#define SPR_MPL_IDN_COMPLETE_SET_2 0x0502
+#define SPR_MPL_IDN_FIREWALL_SET_0 0x1400
+#define SPR_MPL_IDN_FIREWALL_SET_1 0x1401
+#define SPR_MPL_IDN_FIREWALL_SET_2 0x1402
+#define SPR_MPL_IDN_TIMER_SET_0 0x1800
+#define SPR_MPL_IDN_TIMER_SET_1 0x1801
+#define SPR_MPL_IDN_TIMER_SET_2 0x1802
#define SPR_MPL_INTCTRL_0_SET_0 0x2500
#define SPR_MPL_INTCTRL_0_SET_1 0x2501
#define SPR_MPL_INTCTRL_0_SET_2 0x2502
@@ -100,6 +125,21 @@
#define SPR_MPL_INTCTRL_2_SET_0 0x2300
#define SPR_MPL_INTCTRL_2_SET_1 0x2301
#define SPR_MPL_INTCTRL_2_SET_2 0x2302
+#define SPR_MPL_IPI_0 0x1f04
+#define SPR_MPL_IPI_0_SET_0 0x1f00
+#define SPR_MPL_IPI_0_SET_1 0x1f01
+#define SPR_MPL_IPI_0_SET_2 0x1f02
+#define SPR_MPL_IPI_1 0x1e04
+#define SPR_MPL_IPI_1_SET_0 0x1e00
+#define SPR_MPL_IPI_1_SET_1 0x1e01
+#define SPR_MPL_IPI_1_SET_2 0x1e02
+#define SPR_MPL_IPI_2 0x1d04
+#define SPR_MPL_IPI_2_SET_0 0x1d00
+#define SPR_MPL_IPI_2_SET_1 0x1d01
+#define SPR_MPL_IPI_2_SET_2 0x1d02
+#define SPR_MPL_PERF_COUNT_SET_0 0x2000
+#define SPR_MPL_PERF_COUNT_SET_1 0x2001
+#define SPR_MPL_PERF_COUNT_SET_2 0x2002
#define SPR_MPL_UDN_ACCESS_SET_0 0x0b00
#define SPR_MPL_UDN_ACCESS_SET_1 0x0b01
#define SPR_MPL_UDN_ACCESS_SET_2 0x0b02
@@ -167,6 +207,9 @@
#define SPR_UDN_DEMUX_COUNT_2 0x0b07
#define SPR_UDN_DEMUX_COUNT_3 0x0b08
#define SPR_UDN_DIRECTION_PROTECT 0x1505
+#define SPR_UDN_PENDING 0x0b0a
+#define SPR_WATCH_MASK 0x200a
+#define SPR_WATCH_VAL 0x200b
#endif /* !defined(__ARCH_SPR_DEF_H__) */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index 0bb4264..143473e 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -2,6 +2,7 @@
header-y += ../arch/
+header-y += cachectl.h
header-y += ucontext.h
header-y += hardwall.h
@@ -21,7 +22,6 @@
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += local.h
-generic-y += module.h
generic-y += msgbuf.h
generic-y += mutex.h
generic-y += param.h
diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h
index 54d1da8..e7fb5cf 100644
--- a/arch/tile/include/asm/atomic_32.h
+++ b/arch/tile/include/asm/atomic_32.h
@@ -303,7 +303,14 @@
void __atomic_fault_unlock(int *lock_ptr);
#endif
+/* Return a pointer to the lock for the given address. */
+int *__atomic_hashed_lock(volatile void *v);
+
/* Private helper routines in lib/atomic_asm_32.S */
+struct __get_user {
+ unsigned long val;
+ int err;
+};
extern struct __get_user __atomic_cmpxchg(volatile int *p,
int *lock, int o, int n);
extern struct __get_user __atomic_xchg(volatile int *p, int *lock, int n);
@@ -319,6 +326,9 @@
extern u64 __atomic64_xchg_add_unless(volatile u64 *p,
int *lock, u64 o, u64 n);
+/* Return failure from the atomic wrappers. */
+struct __get_user __atomic_bad_address(int __user *addr);
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_TILE_ATOMIC_32_H */
diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h
index 16f1fa5..bd186c4 100644
--- a/arch/tile/include/asm/bitops.h
+++ b/arch/tile/include/asm/bitops.h
@@ -77,6 +77,11 @@
return __builtin_ffs(x);
}
+static inline int fls64(__u64 w)
+{
+ return (sizeof(__u64) * 8) - __builtin_clzll(w);
+}
+
/**
* fls - find last set bit in word
* @x: the word to search
@@ -90,12 +95,7 @@
*/
static inline int fls(int x)
{
- return (sizeof(int) * 8) - __builtin_clz(x);
-}
-
-static inline int fls64(__u64 w)
-{
- return (sizeof(__u64) * 8) - __builtin_clzll(w);
+ return fls64((unsigned int) x);
}
static inline unsigned int __arch_hweight32(unsigned int w)
diff --git a/arch/tile/include/asm/byteorder.h b/arch/tile/include/asm/byteorder.h
index 9558416..fb72ecf 100644
--- a/arch/tile/include/asm/byteorder.h
+++ b/arch/tile/include/asm/byteorder.h
@@ -1 +1,21 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#if defined (__BIG_ENDIAN__)
+#include <linux/byteorder/big_endian.h>
+#elif defined (__LITTLE_ENDIAN__)
#include <linux/byteorder/little_endian.h>
+#else
+#error "__BIG_ENDIAN__ or __LITTLE_ENDIAN__ must be defined."
+#endif
diff --git a/arch/tile/include/asm/cachectl.h b/arch/tile/include/asm/cachectl.h
new file mode 100644
index 0000000..af4c9f9
--- /dev/null
+++ b/arch/tile/include/asm/cachectl.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_CACHECTL_H
+#define _ASM_TILE_CACHECTL_H
+
+/*
+ * Options for cacheflush system call.
+ *
+ * The ICACHE flush is performed on all cores currently running the
+ * current process's address space. The intent is for user
+ * applications to be able to modify code, invoke the system call,
+ * then allow arbitrary other threads in the same address space to see
+ * the newly-modified code. Passing a length of CHIP_L1I_CACHE_SIZE()
+ * or more invalidates the entire icache on all cores in the address
+ * spaces. (Note: currently this option invalidates the entire icache
+ * regardless of the requested address and length, but we may choose
+ * to honor the arguments at some point.)
+ *
+ * Flush and invalidation of memory can normally be performed with the
+ * __insn_flush(), __insn_inv(), and __insn_finv() instructions from
+ * userspace. The DCACHE option to the system call allows userspace
+ * to flush the entire L1+L2 data cache from the core. In this case,
+ * the address and length arguments are not used. The DCACHE flush is
+ * restricted to the current core, not all cores in the address space.
+ */
+#define ICACHE (1<<0) /* invalidate L1 instruction cache */
+#define DCACHE (1<<1) /* flush and invalidate data cache */
+#define BCACHE (ICACHE|DCACHE) /* flush both caches */
+
+#endif /* _ASM_TILE_CACHECTL_H */
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
index 4b4b289..69adc08 100644
--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -242,9 +242,6 @@
long compat_sys_sched_rr_get_interval(compat_pid_t pid,
struct compat_timespec __user *interval);
-/* Tilera Linux syscalls that don't have "compat" versions. */
-#define compat_sys_flush_cache sys_flush_cache
-
/* These are the intvec_64.S trampolines. */
long _compat_sys_execve(const char __user *path,
const compat_uptr_t __user *argv,
diff --git a/arch/tile/include/asm/elf.h b/arch/tile/include/asm/elf.h
index 623a6bb..d16d006 100644
--- a/arch/tile/include/asm/elf.h
+++ b/arch/tile/include/asm/elf.h
@@ -44,7 +44,11 @@
#else
#define ELF_CLASS ELFCLASS32
#endif
+#ifdef __BIG_ENDIAN__
+#define ELF_DATA ELFDATA2MSB
+#else
#define ELF_DATA ELFDATA2LSB
+#endif
/*
* There seems to be a bug in how compat_binfmt_elf.c works: it
@@ -59,6 +63,7 @@
*/
#define elf_check_arch(x) \
((x)->e_ident[EI_CLASS] == ELF_CLASS && \
+ (x)->e_ident[EI_DATA] == ELF_DATA && \
(x)->e_machine == CHIP_ELF_TYPE())
/* The module loader only handles a few relocation types. */
diff --git a/arch/tile/include/asm/futex.h b/arch/tile/include/asm/futex.h
index d03ec12..5909ac3 100644
--- a/arch/tile/include/asm/futex.h
+++ b/arch/tile/include/asm/futex.h
@@ -28,29 +28,81 @@
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <linux/errno.h>
+#include <asm/atomic.h>
-extern struct __get_user futex_set(u32 __user *v, int i);
-extern struct __get_user futex_add(u32 __user *v, int n);
-extern struct __get_user futex_or(u32 __user *v, int n);
-extern struct __get_user futex_andn(u32 __user *v, int n);
-extern struct __get_user futex_cmpxchg(u32 __user *v, int o, int n);
+/*
+ * Support macros for futex operations. Do not use these macros directly.
+ * They assume "ret", "val", "oparg", and "uaddr" in the lexical context.
+ * __futex_cmpxchg() additionally assumes "oldval".
+ */
-#ifndef __tilegx__
-extern struct __get_user futex_xor(u32 __user *v, int n);
+#ifdef __tilegx__
+
+#define __futex_asm(OP) \
+ asm("1: {" #OP " %1, %3, %4; movei %0, 0 }\n" \
+ ".pushsection .fixup,\"ax\"\n" \
+ "0: { movei %0, %5; j 9f }\n" \
+ ".section __ex_table,\"a\"\n" \
+ ".quad 1b, 0b\n" \
+ ".popsection\n" \
+ "9:" \
+ : "=r" (ret), "=r" (val), "+m" (*(uaddr)) \
+ : "r" (uaddr), "r" (oparg), "i" (-EFAULT))
+
+#define __futex_set() __futex_asm(exch4)
+#define __futex_add() __futex_asm(fetchadd4)
+#define __futex_or() __futex_asm(fetchor4)
+#define __futex_andn() ({ oparg = ~oparg; __futex_asm(fetchand4); })
+#define __futex_cmpxchg() \
+ ({ __insn_mtspr(SPR_CMPEXCH_VALUE, oldval); __futex_asm(cmpexch4); })
+
+#define __futex_xor() \
+ ({ \
+ u32 oldval, n = oparg; \
+ if ((ret = __get_user(oldval, uaddr)) == 0) { \
+ do { \
+ oparg = oldval ^ n; \
+ __futex_cmpxchg(); \
+ } while (ret == 0 && oldval != val); \
+ } \
+ })
+
+/* No need to prefetch, since the atomic ops go to the home cache anyway. */
+#define __futex_prolog()
+
#else
-static inline struct __get_user futex_xor(u32 __user *uaddr, int n)
-{
- struct __get_user asm_ret = __get_user_4(uaddr);
- if (!asm_ret.err) {
- int oldval, newval;
- do {
- oldval = asm_ret.val;
- newval = oldval ^ n;
- asm_ret = futex_cmpxchg(uaddr, oldval, newval);
- } while (asm_ret.err == 0 && oldval != asm_ret.val);
+
+#define __futex_call(FN) \
+ { \
+ struct __get_user gu = FN((u32 __force *)uaddr, lock, oparg); \
+ val = gu.val; \
+ ret = gu.err; \
}
- return asm_ret;
-}
+
+#define __futex_set() __futex_call(__atomic_xchg)
+#define __futex_add() __futex_call(__atomic_xchg_add)
+#define __futex_or() __futex_call(__atomic_or)
+#define __futex_andn() __futex_call(__atomic_andn)
+#define __futex_xor() __futex_call(__atomic_xor)
+
+#define __futex_cmpxchg() \
+ { \
+ struct __get_user gu = __atomic_cmpxchg((u32 __force *)uaddr, \
+ lock, oldval, oparg); \
+ val = gu.val; \
+ ret = gu.err; \
+ }
+
+/*
+ * Find the lock pointer for the atomic calls to use, and issue a
+ * prefetch to the user address to bring it into cache. Similar to
+ * __atomic_setup(), but we can't do a read into the L1 since it might
+ * fault; instead we do a prefetch into the L2.
+ */
+#define __futex_prolog() \
+ int *lock; \
+ __insn_prefetch(uaddr); \
+ lock = __atomic_hashed_lock((int __force *)uaddr)
#endif
static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
@@ -59,8 +111,12 @@
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
- int ret;
- struct __get_user asm_ret;
+ int uninitialized_var(val), ret;
+
+ __futex_prolog();
+
+ /* The 32-bit futex code makes this assumption, so validate it here. */
+ BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int));
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
@@ -71,46 +127,45 @@
pagefault_disable();
switch (op) {
case FUTEX_OP_SET:
- asm_ret = futex_set(uaddr, oparg);
+ __futex_set();
break;
case FUTEX_OP_ADD:
- asm_ret = futex_add(uaddr, oparg);
+ __futex_add();
break;
case FUTEX_OP_OR:
- asm_ret = futex_or(uaddr, oparg);
+ __futex_or();
break;
case FUTEX_OP_ANDN:
- asm_ret = futex_andn(uaddr, oparg);
+ __futex_andn();
break;
case FUTEX_OP_XOR:
- asm_ret = futex_xor(uaddr, oparg);
+ __futex_xor();
break;
default:
- asm_ret.err = -ENOSYS;
+ ret = -ENOSYS;
+ break;
}
pagefault_enable();
- ret = asm_ret.err;
-
if (!ret) {
switch (cmp) {
case FUTEX_OP_CMP_EQ:
- ret = (asm_ret.val == cmparg);
+ ret = (val == cmparg);
break;
case FUTEX_OP_CMP_NE:
- ret = (asm_ret.val != cmparg);
+ ret = (val != cmparg);
break;
case FUTEX_OP_CMP_LT:
- ret = (asm_ret.val < cmparg);
+ ret = (val < cmparg);
break;
case FUTEX_OP_CMP_GE:
- ret = (asm_ret.val >= cmparg);
+ ret = (val >= cmparg);
break;
case FUTEX_OP_CMP_LE:
- ret = (asm_ret.val <= cmparg);
+ ret = (val <= cmparg);
break;
case FUTEX_OP_CMP_GT:
- ret = (asm_ret.val > cmparg);
+ ret = (val > cmparg);
break;
default:
ret = -ENOSYS;
@@ -120,22 +175,20 @@
}
static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
- u32 oldval, u32 newval)
+ u32 oldval, u32 oparg)
{
- struct __get_user asm_ret;
+ int ret, val;
+
+ __futex_prolog();
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
- asm_ret = futex_cmpxchg(uaddr, oldval, newval);
- *uval = asm_ret.val;
- return asm_ret.err;
-}
+ __futex_cmpxchg();
-#ifndef __tilegx__
-/* Return failure from the atomic wrappers. */
-struct __get_user __atomic_bad_address(int __user *addr);
-#endif
+ *uval = val;
+ return ret;
+}
#endif /* !__ASSEMBLY__ */
diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h
index 2ac42284..47514a5 100644
--- a/arch/tile/include/asm/hardwall.h
+++ b/arch/tile/include/asm/hardwall.h
@@ -11,12 +11,14 @@
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
- * Provide methods for the HARDWALL_FILE for accessing the UDN.
+ * Provide methods for access control of per-cpu resources like
+ * UDN, IDN, or IPI.
*/
#ifndef _ASM_TILE_HARDWALL_H
#define _ASM_TILE_HARDWALL_H
+#include <arch/chip.h>
#include <linux/ioctl.h>
#define HARDWALL_IOCTL_BASE 0xa2
@@ -24,8 +26,9 @@
/*
* The HARDWALL_CREATE() ioctl is a macro with a "size" argument.
* The resulting ioctl value is passed to the kernel in conjunction
- * with a pointer to a little-endian bitmask of cpus, which must be
- * physically in a rectangular configuration on the chip.
+ * with a pointer to a standard kernel bitmask of cpus.
+ * For network resources (UDN or IDN) the bitmask must physically
+ * represent a rectangular configuration on the chip.
* The "size" is the number of bytes of cpu mask data.
*/
#define _HARDWALL_CREATE 1
@@ -44,13 +47,7 @@
#define HARDWALL_GET_ID \
_IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID)
-#ifndef __KERNEL__
-
-/* This is the canonical name expected by userspace. */
-#define HARDWALL_FILE "/dev/hardwall"
-
-#else
-
+#ifdef __KERNEL__
/* /proc hooks for hardwall. */
struct proc_dir_entry;
#ifdef CONFIG_HARDWALL
@@ -59,7 +56,6 @@
#else
static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {}
#endif
-
#endif
#endif /* _ASM_TILE_HARDWALL_H */
diff --git a/arch/tile/include/asm/hugetlb.h b/arch/tile/include/asm/hugetlb.h
index d396d18..b204238 100644
--- a/arch/tile/include/asm/hugetlb.h
+++ b/arch/tile/include/asm/hugetlb.h
@@ -106,4 +106,25 @@
{
}
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+static inline pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
+ struct page *page, int writable)
+{
+ size_t pagesize = huge_page_size(hstate_vma(vma));
+ if (pagesize != PUD_SIZE && pagesize != PMD_SIZE)
+ entry = pte_mksuper(entry);
+ return entry;
+}
+#define arch_make_huge_pte arch_make_huge_pte
+
+/* Sizes to scale up page size for PTEs with HV_PTE_SUPER bit. */
+enum {
+ HUGE_SHIFT_PGDIR = 0,
+ HUGE_SHIFT_PMD = 1,
+ HUGE_SHIFT_PAGE = 2,
+ HUGE_SHIFT_ENTRIES
+};
+extern int huge_shift[HUGE_SHIFT_ENTRIES];
+#endif
+
#endif /* _ASM_TILE_HUGETLB_H */
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 5db0ce5..b4e96fef2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -28,10 +28,10 @@
*/
#if CHIP_HAS_AUX_PERF_COUNTERS()
#define LINUX_MASKABLE_INTERRUPTS_HI \
- (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
+ (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
#else
#define LINUX_MASKABLE_INTERRUPTS_HI \
- (~(INT_MASK_HI(INT_PERF_COUNT)))
+ (~(INT_MASK_HI(INT_PERF_COUNT)))
#endif
#else
@@ -90,6 +90,14 @@
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
} while (0)
+#define interrupt_mask_save_mask() \
+ (__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \
+ (((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32))
+#define interrupt_mask_restore_mask(mask) do { \
+ unsigned long long __m = (mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \
+} while (0)
#else
#define interrupt_mask_set(n) \
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
@@ -101,6 +109,10 @@
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
#define interrupt_mask_reset_mask(mask) \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
+#define interrupt_mask_save_mask() \
+ __insn_mfspr(SPR_INTERRUPT_MASK_K)
+#define interrupt_mask_restore_mask(mask) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_K, (mask))
#endif
/*
@@ -122,7 +134,7 @@
/* Disable all interrupts, including NMIs. */
#define arch_local_irq_disable_all() \
- interrupt_mask_set_mask(-1UL)
+ interrupt_mask_set_mask(-1ULL)
/* Re-enable all maskable interrupts. */
#define arch_local_irq_enable() \
@@ -179,7 +191,7 @@
#ifdef __tilegx__
#if INT_MEM_ERROR != 0
-# error Fix IRQ_DISABLED() macro
+# error Fix IRQS_DISABLED() macro
#endif
/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
@@ -207,9 +219,10 @@
mtspr SPR_INTERRUPT_MASK_SET_K, tmp
/* Enable interrupts. */
-#define IRQ_ENABLE(tmp0, tmp1) \
+#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
- ld tmp0, tmp0; \
+ ld tmp0, tmp0
+#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0
#else /* !__tilegx__ */
@@ -253,17 +266,22 @@
mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp
/* Enable interrupts. */
-#define IRQ_ENABLE(tmp0, tmp1) \
+#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
{ \
lw tmp0, tmp0; \
addi tmp1, tmp0, 4 \
}; \
- lw tmp1, tmp1; \
+ lw tmp1, tmp1
+#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
#endif
+#define IRQ_ENABLE(tmp0, tmp1) \
+ IRQ_ENABLE_LOAD(tmp0, tmp1); \
+ IRQ_ENABLE_APPLY(tmp0, tmp1)
+
/*
* Do the CPU's IRQ-state tracing from assembly code. We call a
* C function, but almost everywhere we do, we don't mind clobbering
diff --git a/arch/tile/include/asm/kexec.h b/arch/tile/include/asm/kexec.h
index c11a6cc..fc98ccf 100644
--- a/arch/tile/include/asm/kexec.h
+++ b/arch/tile/include/asm/kexec.h
@@ -19,12 +19,24 @@
#include <asm/page.h>
+#ifndef __tilegx__
/* Maximum physical address we can use pages from. */
#define KEXEC_SOURCE_MEMORY_LIMIT TASK_SIZE
/* Maximum address we can reach in physical address mode. */
#define KEXEC_DESTINATION_MEMORY_LIMIT TASK_SIZE
/* Maximum address we can use for the control code buffer. */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+#else
+/* We need to limit the memory below PGDIR_SIZE since
+ * we only setup page table for [0, PGDIR_SIZE) before final kexec.
+ */
+/* Maximum physical address we can use pages from. */
+#define KEXEC_SOURCE_MEMORY_LIMIT PGDIR_SIZE
+/* Maximum address we can reach in physical address mode. */
+#define KEXEC_DESTINATION_MEMORY_LIMIT PGDIR_SIZE
+/* Maximum address we can use for the control code buffer. */
+#define KEXEC_CONTROL_MEMORY_LIMIT PGDIR_SIZE
+#endif
#define KEXEC_CONTROL_PAGE_SIZE PAGE_SIZE
diff --git a/arch/tile/include/asm/mmu.h b/arch/tile/include/asm/mmu.h
index 92f94c7..e2c7890 100644
--- a/arch/tile/include/asm/mmu.h
+++ b/arch/tile/include/asm/mmu.h
@@ -21,7 +21,7 @@
* Written under the mmap_sem semaphore; read without the
* semaphore but atomically, but it is conservatively set.
*/
- unsigned int priority_cached;
+ unsigned long priority_cached;
};
typedef struct mm_context mm_context_t;
diff --git a/arch/tile/include/asm/mmu_context.h b/arch/tile/include/asm/mmu_context.h
index 15fb246..37f0b74 100644
--- a/arch/tile/include/asm/mmu_context.h
+++ b/arch/tile/include/asm/mmu_context.h
@@ -30,11 +30,15 @@
return 0;
}
-/* Note that arch/tile/kernel/head.S also calls hv_install_context() */
+/*
+ * Note that arch/tile/kernel/head_NN.S and arch/tile/mm/migrate_NN.S
+ * also call hv_install_context().
+ */
static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot)
{
/* FIXME: DIRECTIO should not always be set. FIXME. */
- int rc = hv_install_context(__pa(pgdir), prot, asid, HV_CTX_DIRECTIO);
+ int rc = hv_install_context(__pa(pgdir), prot, asid,
+ HV_CTX_DIRECTIO | CTX_PAGE_FLAG);
if (rc < 0)
panic("hv_install_context failed: %d", rc);
}
diff --git a/arch/tile/include/asm/module.h b/arch/tile/include/asm/module.h
new file mode 100644
index 0000000..44ed07c
--- /dev/null
+++ b/arch/tile/include/asm/module.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_MODULE_H
+#define _ASM_TILE_MODULE_H
+
+#include <arch/chip.h>
+
+#include <asm-generic/module.h>
+
+/* We can't use modules built with different page sizes. */
+#if defined(CONFIG_PAGE_SIZE_16KB)
+# define MODULE_PGSZ " 16KB"
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define MODULE_PGSZ " 64KB"
+#else
+# define MODULE_PGSZ ""
+#endif
+
+/* We don't really support no-SMP so tag if someone tries. */
+#ifdef CONFIG_SMP
+#define MODULE_NOSMP ""
+#else
+#define MODULE_NOSMP " nosmp"
+#endif
+
+#define MODULE_ARCH_VERMAGIC CHIP_ARCH_NAME MODULE_PGSZ MODULE_NOSMP
+
+#endif /* _ASM_TILE_MODULE_H */
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
index db93518..9d9131e 100644
--- a/arch/tile/include/asm/page.h
+++ b/arch/tile/include/asm/page.h
@@ -20,8 +20,17 @@
#include <arch/chip.h>
/* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
-#define PAGE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
-#define HPAGE_SHIFT HV_LOG2_PAGE_SIZE_LARGE
+#if defined(CONFIG_PAGE_SIZE_16KB)
+#define PAGE_SHIFT 14
+#define CTX_PAGE_FLAG HV_CTX_PG_SM_16K
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define PAGE_SHIFT 16
+#define CTX_PAGE_FLAG HV_CTX_PG_SM_64K
+#else
+#define PAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_SMALL
+#define CTX_PAGE_FLAG 0
+#endif
+#define HPAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_LARGE
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT)
@@ -78,8 +87,7 @@
/*
* User L2 page tables are managed as one L2 page table per page,
* because we use the page allocator for them. This keeps the allocation
- * simple and makes it potentially useful to implement HIGHPTE at some point.
- * However, it's also inefficient, since L2 page tables are much smaller
+ * simple, but it's also inefficient, since L2 page tables are much smaller
* than pages (currently 2KB vs 64KB). So we should revisit this.
*/
typedef struct page *pgtable_t;
@@ -128,7 +136,7 @@
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE 2
+#define HUGE_MAX_HSTATE 6
#ifdef CONFIG_HUGETLB_PAGE
#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
diff --git a/arch/tile/include/asm/pgalloc.h b/arch/tile/include/asm/pgalloc.h
index e919c0bd..1b90250 100644
--- a/arch/tile/include/asm/pgalloc.h
+++ b/arch/tile/include/asm/pgalloc.h
@@ -19,24 +19,24 @@
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <asm/fixmap.h>
+#include <asm/page.h>
#include <hv/hypervisor.h>
/* Bits for the size of the second-level page table. */
-#define L2_KERNEL_PGTABLE_SHIFT \
- (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL + HV_LOG2_PTE_SIZE)
+#define L2_KERNEL_PGTABLE_SHIFT _HV_LOG2_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
+
+/* How big is a kernel L2 page table? */
+#define L2_KERNEL_PGTABLE_SIZE (1UL << L2_KERNEL_PGTABLE_SHIFT)
/* We currently allocate user L2 page tables by page (unlike kernel L2s). */
-#if L2_KERNEL_PGTABLE_SHIFT < HV_LOG2_PAGE_SIZE_SMALL
-#define L2_USER_PGTABLE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
+#if L2_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT
+#define L2_USER_PGTABLE_SHIFT PAGE_SHIFT
#else
#define L2_USER_PGTABLE_SHIFT L2_KERNEL_PGTABLE_SHIFT
#endif
/* How many pages do we need, as an "order", for a user L2 page table? */
-#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - HV_LOG2_PAGE_SIZE_SMALL)
-
-/* How big is a kernel L2 page table? */
-#define L2_KERNEL_PGTABLE_SIZE (1 << L2_KERNEL_PGTABLE_SHIFT)
+#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - PAGE_SHIFT)
static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
{
@@ -50,14 +50,14 @@
static inline void pmd_populate_kernel(struct mm_struct *mm,
pmd_t *pmd, pte_t *ptep)
{
- set_pmd(pmd, ptfn_pmd(__pa(ptep) >> HV_LOG2_PAGE_TABLE_ALIGN,
+ set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(__pa(ptep)),
__pgprot(_PAGE_PRESENT)));
}
static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
pgtable_t page)
{
- set_pmd(pmd, ptfn_pmd(HV_PFN_TO_PTFN(page_to_pfn(page)),
+ set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(PFN_PHYS(page_to_pfn(page))),
__pgprot(_PAGE_PRESENT)));
}
@@ -68,8 +68,20 @@
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address);
-extern void pte_free(struct mm_struct *mm, struct page *pte);
+extern pgtable_t pgtable_alloc_one(struct mm_struct *mm, unsigned long address,
+ int order);
+extern void pgtable_free(struct mm_struct *mm, struct page *pte, int order);
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ return pgtable_alloc_one(mm, address, L2_USER_PGTABLE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+ pgtable_free(mm, pte, L2_USER_PGTABLE_ORDER);
+}
#define pmd_pgtable(pmd) pmd_page(pmd)
@@ -85,8 +97,13 @@
pte_free(mm, virt_to_page(pte));
}
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
- unsigned long address);
+extern void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address, int order);
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address)
+{
+ __pgtable_free_tlb(tlb, pte, address, L2_USER_PGTABLE_ORDER);
+}
#define check_pgt_cache() do { } while (0)
@@ -104,19 +121,44 @@
void shatter_huge_page(unsigned long addr);
#ifdef __tilegx__
-/* We share a single page allocator for both L1 and L2 page tables. */
-#if HV_L1_SIZE != HV_L2_SIZE
-# error Rework assumption that L1 and L2 page tables are same size.
-#endif
-#define L1_USER_PGTABLE_ORDER L2_USER_PGTABLE_ORDER
+
#define pud_populate(mm, pud, pmd) \
pmd_populate_kernel((mm), (pmd_t *)(pud), (pte_t *)(pmd))
-#define pmd_alloc_one(mm, addr) \
- ((pmd_t *)page_to_virt(pte_alloc_one((mm), (addr))))
-#define pmd_free(mm, pmdp) \
- pte_free((mm), virt_to_page(pmdp))
-#define __pmd_free_tlb(tlb, pmdp, address) \
- __pte_free_tlb((tlb), virt_to_page(pmdp), (address))
+
+/* Bits for the size of the L1 (intermediate) page table. */
+#define L1_KERNEL_PGTABLE_SHIFT _HV_LOG2_L1_SIZE(HPAGE_SHIFT)
+
+/* How big is a kernel L2 page table? */
+#define L1_KERNEL_PGTABLE_SIZE (1UL << L1_KERNEL_PGTABLE_SHIFT)
+
+/* We currently allocate L1 page tables by page. */
+#if L1_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT
+#define L1_USER_PGTABLE_SHIFT PAGE_SHIFT
+#else
+#define L1_USER_PGTABLE_SHIFT L1_KERNEL_PGTABLE_SHIFT
#endif
+/* How many pages do we need, as an "order", for an L1 page table? */
+#define L1_USER_PGTABLE_ORDER (L1_USER_PGTABLE_SHIFT - PAGE_SHIFT)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *p = pgtable_alloc_one(mm, address, L1_USER_PGTABLE_ORDER);
+ return (pmd_t *)page_to_virt(p);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmdp)
+{
+ pgtable_free(mm, virt_to_page(pmdp), L1_USER_PGTABLE_ORDER);
+}
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+ unsigned long address)
+{
+ __pgtable_free_tlb(tlb, virt_to_page(pmdp), address,
+ L1_USER_PGTABLE_ORDER);
+}
+
+#endif /* __tilegx__ */
+
#endif /* _ASM_TILE_PGALLOC_H */
diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h
index 6749091..73b1a4c 100644
--- a/arch/tile/include/asm/pgtable.h
+++ b/arch/tile/include/asm/pgtable.h
@@ -27,8 +27,10 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
+#include <linux/pfn.h>
#include <asm/processor.h>
#include <asm/fixmap.h>
+#include <asm/page.h>
struct mm_struct;
struct vm_area_struct;
@@ -69,6 +71,7 @@
#define _PAGE_PRESENT HV_PTE_PRESENT
#define _PAGE_HUGE_PAGE HV_PTE_PAGE
+#define _PAGE_SUPER_PAGE HV_PTE_SUPER
#define _PAGE_READABLE HV_PTE_READABLE
#define _PAGE_WRITABLE HV_PTE_WRITABLE
#define _PAGE_EXECUTABLE HV_PTE_EXECUTABLE
@@ -85,6 +88,7 @@
#define _PAGE_ALL (\
_PAGE_PRESENT | \
_PAGE_HUGE_PAGE | \
+ _PAGE_SUPER_PAGE | \
_PAGE_READABLE | \
_PAGE_WRITABLE | \
_PAGE_EXECUTABLE | \
@@ -162,7 +166,7 @@
(pgprot_t) { ((oldprot).val & ~_PAGE_ALL) | (newprot).val }
/* Just setting the PFN to zero suffices. */
-#define pte_pgprot(x) hv_pte_set_pfn((x), 0)
+#define pte_pgprot(x) hv_pte_set_pa((x), 0)
/*
* For PTEs and PDEs, we must clear the Present bit first when
@@ -187,6 +191,7 @@
* Undefined behaviour if not..
*/
#define pte_present hv_pte_get_present
+#define pte_mknotpresent hv_pte_clear_present
#define pte_user hv_pte_get_user
#define pte_read hv_pte_get_readable
#define pte_dirty hv_pte_get_dirty
@@ -194,6 +199,7 @@
#define pte_write hv_pte_get_writable
#define pte_exec hv_pte_get_executable
#define pte_huge hv_pte_get_page
+#define pte_super hv_pte_get_super
#define pte_rdprotect hv_pte_clear_readable
#define pte_exprotect hv_pte_clear_executable
#define pte_mkclean hv_pte_clear_dirty
@@ -206,6 +212,7 @@
#define pte_mkyoung hv_pte_set_accessed
#define pte_mkwrite hv_pte_set_writable
#define pte_mkhuge hv_pte_set_page
+#define pte_mksuper hv_pte_set_super
#define pte_special(pte) 0
#define pte_mkspecial(pte) (pte)
@@ -261,7 +268,7 @@
static inline unsigned long pte_pfn(pte_t pte)
{
- return hv_pte_get_pfn(pte);
+ return PFN_DOWN(hv_pte_get_pa(pte));
}
/* Set or get the remote cache cpu in a pgprot with remote caching. */
@@ -270,7 +277,7 @@
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
{
- return hv_pte_set_pfn(prot, pfn);
+ return hv_pte_set_pa(prot, PFN_PHYS(pfn));
}
/* Support for priority mappings. */
@@ -312,7 +319,7 @@
*/
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- return pfn_pte(hv_pte_get_pfn(pte), newprot);
+ return pfn_pte(pte_pfn(pte), newprot);
}
/*
@@ -335,13 +342,8 @@
*/
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-#if defined(CONFIG_HIGHPTE)
-extern pte_t *pte_offset_map(pmd_t *, unsigned long address);
-#define pte_unmap(pte) kunmap_atomic(pte)
-#else
#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
#define pte_unmap(pte) do { } while (0)
-#endif
/* Clear a non-executable kernel PTE and flush it from the TLB. */
#define kpte_clear_flush(ptep, vaddr) \
@@ -410,6 +412,46 @@
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
+#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
+static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+ unsigned long address,
+ pmd_t *pmdp)
+{
+ return ptep_test_and_clear_young(vma, address, pmdp_ptep(pmdp));
+}
+
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+ unsigned long address, pmd_t *pmdp)
+{
+ ptep_set_wrprotect(mm, address, pmdp_ptep(pmdp));
+}
+
+
+#define __HAVE_ARCH_PMDP_GET_AND_CLEAR
+static inline pmd_t pmdp_get_and_clear(struct mm_struct *mm,
+ unsigned long address,
+ pmd_t *pmdp)
+{
+ return pte_pmd(ptep_get_and_clear(mm, address, pmdp_ptep(pmdp)));
+}
+
+static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+ set_pte(pmdp_ptep(pmdp), pmd_pte(pmdval));
+}
+
+#define set_pmd_at(mm, addr, pmdp, pmdval) __set_pmd(pmdp, pmdval)
+
+/* Create a pmd from a PTFN. */
+static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
+{
+ return pte_pmd(hv_pte_set_ptfn(prot, ptfn));
+}
+
+/* Return the page-table frame number (ptfn) that a pmd_t points at. */
+#define pmd_ptfn(pmd) hv_pte_get_ptfn(pmd_pte(pmd))
+
/*
* A given kernel pmd_t maps to a specific virtual address (either a
* kernel huge page or a kernel pte_t table). Since kernel pte_t
@@ -430,7 +472,48 @@
* OK for pte_lockptr(), since we just end up with potentially one
* lock being used for several pte_t arrays.
*/
-#define pmd_page(pmd) pfn_to_page(HV_PTFN_TO_PFN(pmd_ptfn(pmd)))
+#define pmd_page(pmd) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pmd_ptfn(pmd))))
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ __pte_clear(pmdp_ptep(pmdp));
+}
+
+#define pmd_mknotpresent(pmd) pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
+#define pmd_young(pmd) pte_young(pmd_pte(pmd))
+#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_write(pmd) pte_write(pmd_pte(pmd))
+#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_huge_page(pmd) pte_huge(pmd_pte(pmd))
+#define pmd_mkhuge(pmd) pte_pmd(pte_mkhuge(pmd_pte(pmd)))
+#define __HAVE_ARCH_PMD_WRITE
+
+#define pfn_pmd(pfn, pgprot) pte_pmd(pfn_pte((pfn), (pgprot)))
+#define pmd_pfn(pmd) pte_pfn(pmd_pte(pmd))
+#define mk_pmd(page, pgprot) pfn_pmd(page_to_pfn(page), (pgprot))
+
+static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
+{
+ return pfn_pmd(pmd_pfn(pmd), newprot);
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define has_transparent_hugepage() 1
+#define pmd_trans_huge pmd_huge_page
+
+static inline pmd_t pmd_mksplitting(pmd_t pmd)
+{
+ return pte_pmd(hv_pte_set_client2(pmd_pte(pmd)));
+}
+
+static inline int pmd_trans_splitting(pmd_t pmd)
+{
+ return hv_pte_get_client2(pmd_pte(pmd));
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
* The pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
@@ -448,17 +531,13 @@
return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
}
-static inline int pmd_huge_page(pmd_t pmd)
-{
- return pmd_val(pmd) & _PAGE_HUGE_PAGE;
-}
-
#include <asm-generic/pgtable.h>
/* Support /proc/NN/pgtable API. */
struct seq_file;
int arch_proc_pgtable_show(struct seq_file *m, struct mm_struct *mm,
- unsigned long vaddr, pte_t *ptep, void **datap);
+ unsigned long vaddr, unsigned long pagesize,
+ pte_t *ptep, void **datap);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h
index 9f98529..4ce4a7a 100644
--- a/arch/tile/include/asm/pgtable_32.h
+++ b/arch/tile/include/asm/pgtable_32.h
@@ -20,11 +20,12 @@
* The level-1 index is defined by the huge page size. A PGD is composed
* of PTRS_PER_PGD pgd_t's and is the top level of the page table.
*/
-#define PGDIR_SHIFT HV_LOG2_PAGE_SIZE_LARGE
-#define PGDIR_SIZE HV_PAGE_SIZE_LARGE
+#define PGDIR_SHIFT HPAGE_SHIFT
+#define PGDIR_SIZE HPAGE_SIZE
#define PGDIR_MASK (~(PGDIR_SIZE-1))
-#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
-#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t))
+#define PTRS_PER_PGD _HV_L1_ENTRIES(HPAGE_SHIFT)
+#define PGD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT)
+#define SIZEOF_PGD _HV_L1_SIZE(HPAGE_SHIFT)
/*
* The level-2 index is defined by the difference between the huge
@@ -33,8 +34,9 @@
* Note that the hypervisor docs use PTE for what we call pte_t, so
* this nomenclature is somewhat confusing.
*/
-#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
-#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t))
+#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT)
+#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT)
+#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
#ifndef __ASSEMBLY__
@@ -111,24 +113,14 @@
return pte;
}
-static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval)
-{
- set_pte(&pmdp->pud.pgd, pmdval.pud.pgd);
-}
-
-/* Create a pmd from a PTFN. */
-static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
-{
- return (pmd_t){ { hv_pte_set_ptfn(prot, ptfn) } };
-}
-
-/* Return the page-table frame number (ptfn) that a pmd_t points at. */
-#define pmd_ptfn(pmd) hv_pte_get_ptfn((pmd).pud.pgd)
-
-static inline void pmd_clear(pmd_t *pmdp)
-{
- __pte_clear(&pmdp->pud.pgd);
-}
+/*
+ * pmds are wrappers around pgds, which are the same as ptes.
+ * It's often convenient to "cast" back and forth and use the pte methods,
+ * which are the methods supplied by the hypervisor.
+ */
+#define pmd_pte(pmd) ((pmd).pud.pgd)
+#define pmdp_ptep(pmdp) (&(pmdp)->pud.pgd)
+#define pte_pmd(pte) ((pmd_t){ { (pte) } })
#endif /* __ASSEMBLY__ */
diff --git a/arch/tile/include/asm/pgtable_64.h b/arch/tile/include/asm/pgtable_64.h
index fd80328..2492fa5 100644
--- a/arch/tile/include/asm/pgtable_64.h
+++ b/arch/tile/include/asm/pgtable_64.h
@@ -21,17 +21,19 @@
#define PGDIR_SIZE HV_L1_SPAN
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PGD HV_L0_ENTRIES
-#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t))
+#define PGD_INDEX(va) HV_L0_INDEX(va)
+#define SIZEOF_PGD HV_L0_SIZE
/*
* The level-1 index is defined by the huge page size. A PMD is composed
* of PTRS_PER_PMD pgd_t's and is the middle level of the page table.
*/
-#define PMD_SHIFT HV_LOG2_PAGE_SIZE_LARGE
-#define PMD_SIZE HV_PAGE_SIZE_LARGE
+#define PMD_SHIFT HPAGE_SHIFT
+#define PMD_SIZE HPAGE_SIZE
#define PMD_MASK (~(PMD_SIZE-1))
-#define PTRS_PER_PMD (1 << (PGDIR_SHIFT - PMD_SHIFT))
-#define SIZEOF_PMD (PTRS_PER_PMD * sizeof(pmd_t))
+#define PTRS_PER_PMD _HV_L1_ENTRIES(HPAGE_SHIFT)
+#define PMD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT)
+#define SIZEOF_PMD _HV_L1_SIZE(HPAGE_SHIFT)
/*
* The level-2 index is defined by the difference between the huge
@@ -40,17 +42,19 @@
* Note that the hypervisor docs use PTE for what we call pte_t, so
* this nomenclature is somewhat confusing.
*/
-#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
-#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t))
+#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT)
+#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT)
+#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
/*
- * Align the vmalloc area to an L2 page table, and leave a guard page
- * at the beginning and end. The vmalloc code also puts in an internal
+ * Align the vmalloc area to an L2 page table. Omit guard pages at
+ * the beginning and end for simplicity (particularly in the per-cpu
+ * memory allocation code). The vmalloc code puts in an internal
* guard page between each allocation.
*/
#define _VMALLOC_END HUGE_VMAP_BASE
-#define VMALLOC_END (_VMALLOC_END - PAGE_SIZE)
-#define VMALLOC_START (_VMALLOC_START + PAGE_SIZE)
+#define VMALLOC_END _VMALLOC_END
+#define VMALLOC_START _VMALLOC_START
#define HUGE_VMAP_END (HUGE_VMAP_BASE + PGDIR_SIZE)
@@ -98,7 +102,7 @@
* A pud_t points to a pmd_t array. Since we can have multiple per
* page, we don't have a one-to-one mapping of pud_t's to pages.
*/
-#define pud_page(pud) pfn_to_page(HV_PTFN_TO_PFN(pud_ptfn(pud)))
+#define pud_page(pud) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pud_ptfn(pud))))
static inline unsigned long pud_index(unsigned long address)
{
@@ -108,28 +112,6 @@
#define pmd_offset(pud, address) \
((pmd_t *)pud_page_vaddr(*(pud)) + pmd_index(address))
-static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval)
-{
- set_pte(pmdp, pmdval);
-}
-
-/* Create a pmd from a PTFN and pgprot. */
-static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
-{
- return hv_pte_set_ptfn(prot, ptfn);
-}
-
-/* Return the page-table frame number (ptfn) that a pmd_t points at. */
-static inline unsigned long pmd_ptfn(pmd_t pmd)
-{
- return hv_pte_get_ptfn(pmd);
-}
-
-static inline void pmd_clear(pmd_t *pmdp)
-{
- __pte_clear(pmdp);
-}
-
/* Normalize an address to having the correct high bits set. */
#define pgd_addr_normalize pgd_addr_normalize
static inline unsigned long pgd_addr_normalize(unsigned long addr)
@@ -170,6 +152,13 @@
return hv_pte(__insn_exch(&ptep->val, 0UL));
}
+/*
+ * pmds are the same as pgds and ptes, so converting is a no-op.
+ */
+#define pmd_pte(pmd) (pmd)
+#define pmdp_ptep(pmdp) (pmdp)
+#define pte_pmd(pte) (pte)
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_TILE_PGTABLE_64_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 15cd8a4..8c4dd9f 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -76,6 +76,17 @@
#ifdef CONFIG_HARDWALL
struct hardwall_info;
+struct hardwall_task {
+ /* Which hardwall is this task tied to? (or NULL if none) */
+ struct hardwall_info *info;
+ /* Chains this task into the list at info->task_head. */
+ struct list_head list;
+};
+#ifdef __tilepro__
+#define HARDWALL_TYPES 1 /* udn */
+#else
+#define HARDWALL_TYPES 3 /* udn, idn, and ipi */
+#endif
#endif
struct thread_struct {
@@ -116,10 +127,8 @@
unsigned long dstream_pf;
#endif
#ifdef CONFIG_HARDWALL
- /* Is this task tied to an activated hardwall? */
- struct hardwall_info *hardwall;
- /* Chains this task into the list at hardwall->list. */
- struct list_head hardwall_list;
+ /* Hardwall information for various resources. */
+ struct hardwall_task hardwall[HARDWALL_TYPES];
#endif
#if CHIP_HAS_TILE_DMA()
/* Async DMA TLB fault information */
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
index e58613e..c67eb70 100644
--- a/arch/tile/include/asm/setup.h
+++ b/arch/tile/include/asm/setup.h
@@ -41,15 +41,15 @@
#ifdef CONFIG_HARDWALL
/* User-level network management functions */
void reset_network_state(void);
-void grant_network_mpls(void);
-void restrict_network_mpls(void);
struct task_struct;
-int hardwall_deactivate(struct task_struct *task);
+void hardwall_switch_tasks(struct task_struct *prev, struct task_struct *next);
+void hardwall_deactivate_all(struct task_struct *task);
+int hardwall_ipi_valid(int cpu);
/* Hook hardwall code into changes in affinity. */
#define arch_set_cpus_allowed(p, new_mask) do { \
- if (p->thread.hardwall && !cpumask_equal(&p->cpus_allowed, new_mask)) \
- hardwall_deactivate(p); \
+ if (!cpumask_equal(&p->cpus_allowed, new_mask)) \
+ hardwall_deactivate_all(p); \
} while (0)
#endif
diff --git a/arch/tile/include/asm/syscalls.h b/arch/tile/include/asm/syscalls.h
index 3b5507c..06f0464 100644
--- a/arch/tile/include/asm/syscalls.h
+++ b/arch/tile/include/asm/syscalls.h
@@ -43,7 +43,8 @@
u32 len, int advice);
int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
u32 len_lo, u32 len_hi, int advice);
-long sys_flush_cache(void);
+long sys_cacheflush(unsigned long addr, unsigned long len,
+ unsigned long flags);
#ifndef __tilegx__ /* No mmap() in the 32-bit kernel. */
#define sys_mmap sys_mmap
#endif
diff --git a/arch/tile/include/asm/tlbflush.h b/arch/tile/include/asm/tlbflush.h
index 96199d2..dcf91b2 100644
--- a/arch/tile/include/asm/tlbflush.h
+++ b/arch/tile/include/asm/tlbflush.h
@@ -38,16 +38,11 @@
/* The hypervisor tells us what ASIDs are available to us. */
extern int min_asid, max_asid;
-static inline unsigned long hv_page_size(const struct vm_area_struct *vma)
-{
- return (vma->vm_flags & VM_HUGETLB) ? HPAGE_SIZE : PAGE_SIZE;
-}
-
/* Pass as vma pointer for non-executable mapping, if no vma available. */
-#define FLUSH_NONEXEC ((const struct vm_area_struct *)-1UL)
+#define FLUSH_NONEXEC ((struct vm_area_struct *)-1UL)
/* Flush a single user page on this cpu. */
-static inline void local_flush_tlb_page(const struct vm_area_struct *vma,
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr,
unsigned long page_size)
{
@@ -60,7 +55,7 @@
}
/* Flush range of user pages on this cpu. */
-static inline void local_flush_tlb_pages(const struct vm_area_struct *vma,
+static inline void local_flush_tlb_pages(struct vm_area_struct *vma,
unsigned long addr,
unsigned long page_size,
unsigned long len)
@@ -117,10 +112,10 @@
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void flush_tlb_current_task(void);
extern void flush_tlb_mm(struct mm_struct *);
-extern void flush_tlb_page(const struct vm_area_struct *, unsigned long);
-extern void flush_tlb_page_mm(const struct vm_area_struct *,
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_page_mm(struct vm_area_struct *,
struct mm_struct *, unsigned long);
-extern void flush_tlb_range(const struct vm_area_struct *,
+extern void flush_tlb_range(struct vm_area_struct *,
unsigned long start, unsigned long end);
#define flush_tlb() flush_tlb_current_task()
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
index ef34d2caa..c3dd275 100644
--- a/arch/tile/include/asm/uaccess.h
+++ b/arch/tile/include/asm/uaccess.h
@@ -114,45 +114,75 @@
extern int fixup_exception(struct pt_regs *regs);
/*
- * We return the __get_user_N function results in a structure,
- * thus in r0 and r1. If "err" is zero, "val" is the result
- * of the read; otherwise, "err" is -EFAULT.
+ * Support macros for __get_user().
*
- * We rarely need 8-byte values on a 32-bit architecture, but
- * we size the structure to accommodate. In practice, for the
- * the smaller reads, we can zero the high word for free, and
- * the caller will ignore it by virtue of casting anyway.
+ * Implementation note: The "case 8" logic of casting to the type of
+ * the result of subtracting the value from itself is basically a way
+ * of keeping all integer types the same, but casting any pointers to
+ * ptrdiff_t, i.e. also an integer type. This way there are no
+ * questionable casts seen by the compiler on an ILP32 platform.
+ *
+ * Note that __get_user() and __put_user() assume proper alignment.
*/
-struct __get_user {
- unsigned long long val;
- int err;
-};
-/*
- * FIXME: we should express these as inline extended assembler, since
- * they're fundamentally just a variable dereference and some
- * supporting exception_table gunk. Note that (a la i386) we can
- * extend the copy_to_user and copy_from_user routines to call into
- * such extended assembler routines, though we will have to use a
- * different return code in that case (1, 2, or 4, rather than -EFAULT).
- */
-extern struct __get_user __get_user_1(const void __user *);
-extern struct __get_user __get_user_2(const void __user *);
-extern struct __get_user __get_user_4(const void __user *);
-extern struct __get_user __get_user_8(const void __user *);
-extern int __put_user_1(long, void __user *);
-extern int __put_user_2(long, void __user *);
-extern int __put_user_4(long, void __user *);
-extern int __put_user_8(long long, void __user *);
+#ifdef __LP64__
+#define _ASM_PTR ".quad"
+#else
+#define _ASM_PTR ".long"
+#endif
-/* Unimplemented routines to cause linker failures */
-extern struct __get_user __get_user_bad(void);
-extern int __put_user_bad(void);
+#define __get_user_asm(OP, x, ptr, ret) \
+ asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n" \
+ ".pushsection .fixup,\"ax\"\n" \
+ "0: { movei %1, 0; movei %0, %3 }\n" \
+ "j 9f\n" \
+ ".section __ex_table,\"a\"\n" \
+ _ASM_PTR " 1b, 0b\n" \
+ ".popsection\n" \
+ "9:" \
+ : "=r" (ret), "=r" (x) \
+ : "r" (ptr), "i" (-EFAULT))
-/*
- * Careful: we have to cast the result to the type of the pointer
- * for sign reasons.
- */
+#ifdef __tilegx__
+#define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
+#define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
+#else
+#define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
+#define __get_user_2(x, ptr, ret) __get_user_asm(lh_u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(lw, x, ptr, ret)
+#ifdef __LITTLE_ENDIAN
+#define __lo32(a, b) a
+#define __hi32(a, b) b
+#else
+#define __lo32(a, b) b
+#define __hi32(a, b) a
+#endif
+#define __get_user_8(x, ptr, ret) \
+ ({ \
+ unsigned int __a, __b; \
+ asm volatile("1: { lw %1, %3; addi %2, %3, 4 }\n" \
+ "2: { lw %2, %2; movei %0, 0 }\n" \
+ ".pushsection .fixup,\"ax\"\n" \
+ "0: { movei %1, 0; movei %2, 0 }\n" \
+ "{ movei %0, %4; j 9f }\n" \
+ ".section __ex_table,\"a\"\n" \
+ ".word 1b, 0b\n" \
+ ".word 2b, 0b\n" \
+ ".popsection\n" \
+ "9:" \
+ : "=r" (ret), "=r" (__a), "=&r" (__b) \
+ : "r" (ptr), "i" (-EFAULT)); \
+ (x) = (__typeof(x))(__typeof((x)-(x))) \
+ (((u64)__hi32(__a, __b) << 32) | \
+ __lo32(__a, __b)); \
+ })
+#endif
+
+extern int __get_user_bad(void)
+ __attribute__((warning("sizeof __get_user argument not 1, 2, 4 or 8")));
+
/**
* __get_user: - Get a simple variable from user space, with less checking.
* @x: Variable to store result.
@@ -174,30 +204,62 @@
* function.
*/
#define __get_user(x, ptr) \
-({ struct __get_user __ret; \
- __typeof__(*(ptr)) const __user *__gu_addr = (ptr); \
- __chk_user_ptr(__gu_addr); \
- switch (sizeof(*(__gu_addr))) { \
- case 1: \
- __ret = __get_user_1(__gu_addr); \
- break; \
- case 2: \
- __ret = __get_user_2(__gu_addr); \
- break; \
- case 4: \
- __ret = __get_user_4(__gu_addr); \
- break; \
- case 8: \
- __ret = __get_user_8(__gu_addr); \
- break; \
- default: \
- __ret = __get_user_bad(); \
- break; \
- } \
- (x) = (__typeof__(*__gu_addr)) (__typeof__(*__gu_addr - *__gu_addr)) \
- __ret.val; \
- __ret.err; \
-})
+ ({ \
+ int __ret; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: __get_user_1(x, ptr, __ret); break; \
+ case 2: __get_user_2(x, ptr, __ret); break; \
+ case 4: __get_user_4(x, ptr, __ret); break; \
+ case 8: __get_user_8(x, ptr, __ret); break; \
+ default: __ret = __get_user_bad(); break; \
+ } \
+ __ret; \
+ })
+
+/* Support macros for __put_user(). */
+
+#define __put_user_asm(OP, x, ptr, ret) \
+ asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n" \
+ ".pushsection .fixup,\"ax\"\n" \
+ "0: { movei %0, %3; j 9f }\n" \
+ ".section __ex_table,\"a\"\n" \
+ _ASM_PTR " 1b, 0b\n" \
+ ".popsection\n" \
+ "9:" \
+ : "=r" (ret) \
+ : "r" (ptr), "r" (x), "i" (-EFAULT))
+
+#ifdef __tilegx__
+#define __put_user_1(x, ptr, ret) __put_user_asm(st1, x, ptr, ret)
+#define __put_user_2(x, ptr, ret) __put_user_asm(st2, x, ptr, ret)
+#define __put_user_4(x, ptr, ret) __put_user_asm(st4, x, ptr, ret)
+#define __put_user_8(x, ptr, ret) __put_user_asm(st, x, ptr, ret)
+#else
+#define __put_user_1(x, ptr, ret) __put_user_asm(sb, x, ptr, ret)
+#define __put_user_2(x, ptr, ret) __put_user_asm(sh, x, ptr, ret)
+#define __put_user_4(x, ptr, ret) __put_user_asm(sw, x, ptr, ret)
+#define __put_user_8(x, ptr, ret) \
+ ({ \
+ u64 __x = (__typeof((x)-(x)))(x); \
+ int __lo = (int) __x, __hi = (int) (__x >> 32); \
+ asm volatile("1: { sw %1, %2; addi %0, %1, 4 }\n" \
+ "2: { sw %0, %3; movei %0, 0 }\n" \
+ ".pushsection .fixup,\"ax\"\n" \
+ "0: { movei %0, %4; j 9f }\n" \
+ ".section __ex_table,\"a\"\n" \
+ ".word 1b, 0b\n" \
+ ".word 2b, 0b\n" \
+ ".popsection\n" \
+ "9:" \
+ : "=&r" (ret) \
+ : "r" (ptr), "r" (__lo32(__lo, __hi)), \
+ "r" (__hi32(__lo, __hi)), "i" (-EFAULT)); \
+ })
+#endif
+
+extern int __put_user_bad(void)
+ __attribute__((warning("sizeof __put_user argument not 1, 2, 4 or 8")));
/**
* __put_user: - Write a simple value into user space, with less checking.
@@ -217,39 +279,19 @@
* function.
*
* Returns zero on success, or -EFAULT on error.
- *
- * Implementation note: The "case 8" logic of casting to the type of
- * the result of subtracting the value from itself is basically a way
- * of keeping all integer types the same, but casting any pointers to
- * ptrdiff_t, i.e. also an integer type. This way there are no
- * questionable casts seen by the compiler on an ILP32 platform.
*/
#define __put_user(x, ptr) \
({ \
- int __pu_err = 0; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- typeof(*__pu_addr) __pu_val = (x); \
- __chk_user_ptr(__pu_addr); \
- switch (sizeof(__pu_val)) { \
- case 1: \
- __pu_err = __put_user_1((long)__pu_val, __pu_addr); \
- break; \
- case 2: \
- __pu_err = __put_user_2((long)__pu_val, __pu_addr); \
- break; \
- case 4: \
- __pu_err = __put_user_4((long)__pu_val, __pu_addr); \
- break; \
- case 8: \
- __pu_err = \
- __put_user_8((__typeof__(__pu_val - __pu_val))__pu_val,\
- __pu_addr); \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
+ int __ret; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: __put_user_1(x, ptr, __ret); break; \
+ case 2: __put_user_2(x, ptr, __ret); break; \
+ case 4: __put_user_4(x, ptr, __ret); break; \
+ case 8: __put_user_8(x, ptr, __ret); break; \
+ default: __ret = __put_user_bad(); break; \
} \
- __pu_err; \
+ __ret; \
})
/*
@@ -378,7 +420,7 @@
/**
* __copy_in_user() - copy data within user space, with less checking.
* @to: Destination address, in user space.
- * @from: Source address, in kernel space.
+ * @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h
index f70bf1c..a017246 100644
--- a/arch/tile/include/asm/unistd.h
+++ b/arch/tile/include/asm/unistd.h
@@ -24,8 +24,8 @@
#include <asm-generic/unistd.h>
/* Additional Tilera-specific syscalls. */
-#define __NR_flush_cache (__NR_arch_specific_syscall + 1)
-__SYSCALL(__NR_flush_cache, sys_flush_cache)
+#define __NR_cacheflush (__NR_arch_specific_syscall + 1)
+__SYSCALL(__NR_cacheflush, sys_cacheflush)
#ifndef __tilegx__
/* "Fast" syscalls provide atomic support for 32-bit chips. */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
index f13188a..2a20b26 100644
--- a/arch/tile/include/hv/drv_xgbe_intf.h
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -460,7 +460,7 @@
* linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
* our page size of exactly 65536. We add one for a "body" fragment.
*/
-#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+#define LEPP_MAX_FRAGS (65536 / HV_DEFAULT_PAGE_SIZE_SMALL + 2 + 1)
/** Total number of bytes needed for an lepp_tso_cmd_t. */
#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 72ec1e9..ccd847e2 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -17,8 +17,8 @@
* The hypervisor's public API.
*/
-#ifndef _TILE_HV_H
-#define _TILE_HV_H
+#ifndef _HV_HV_H
+#define _HV_HV_H
#include <arch/chip.h>
@@ -42,25 +42,45 @@
*/
#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN)
-/** The log2 of the size of small pages, in bytes. This value should
- * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+/** The log2 of the initial size of small pages, in bytes.
+ * See HV_DEFAULT_PAGE_SIZE_SMALL.
*/
-#define HV_LOG2_PAGE_SIZE_SMALL 16
+#define HV_LOG2_DEFAULT_PAGE_SIZE_SMALL 16
-/** The size of small pages, in bytes. This value should be verified
+/** The initial size of small pages, in bytes. This value should be verified
* at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+ * It may also be modified when installing a new context.
*/
-#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL)
+#define HV_DEFAULT_PAGE_SIZE_SMALL \
+ (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_SMALL)
-/** The log2 of the size of large pages, in bytes. This value should be
- * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+/** The log2 of the initial size of large pages, in bytes.
+ * See HV_DEFAULT_PAGE_SIZE_LARGE.
*/
-#define HV_LOG2_PAGE_SIZE_LARGE 24
+#define HV_LOG2_DEFAULT_PAGE_SIZE_LARGE 24
-/** The size of large pages, in bytes. This value should be verified
+/** The initial size of large pages, in bytes. This value should be verified
* at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+ * It may also be modified when installing a new context.
*/
-#define HV_PAGE_SIZE_LARGE (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_LARGE)
+#define HV_DEFAULT_PAGE_SIZE_LARGE \
+ (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_LARGE)
+
+#if CHIP_VA_WIDTH() > 32
+
+/** The log2 of the initial size of jumbo pages, in bytes.
+ * See HV_DEFAULT_PAGE_SIZE_JUMBO.
+ */
+#define HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO 32
+
+/** The initial size of jumbo pages, in bytes. This value should
+ * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_JUMBO).
+ * It may also be modified when installing a new context.
+ */
+#define HV_DEFAULT_PAGE_SIZE_JUMBO \
+ (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO)
+
+#endif
/** The log2 of the granularity at which page tables must be aligned;
* in other words, the CPA for a page table must have this many zero
@@ -280,8 +300,11 @@
#define HV_DISPATCH_GET_IPI_PTE 56
#endif
+/** hv_set_pte_super_shift */
+#define HV_DISPATCH_SET_PTE_SUPER_SHIFT 57
+
/** One more than the largest dispatch value */
-#define _HV_DISPATCH_END 57
+#define _HV_DISPATCH_END 58
#ifndef __ASSEMBLER__
@@ -401,7 +424,18 @@
* that the temperature has hit an upper limit and is no longer being
* accurately tracked.
*/
- HV_SYSCONF_BOARD_TEMP = 6
+ HV_SYSCONF_BOARD_TEMP = 6,
+
+ /** Legal page size bitmask for hv_install_context().
+ * For example, if 16KB and 64KB small pages are supported,
+ * it would return "HV_CTX_PG_SM_16K | HV_CTX_PG_SM_64K".
+ */
+ HV_SYSCONF_VALID_PAGE_SIZES = 7,
+
+ /** The size of jumbo pages, in bytes.
+ * If no jumbo pages are available, zero will be returned.
+ */
+ HV_SYSCONF_PAGE_SIZE_JUMBO = 8,
} HV_SysconfQuery;
@@ -474,7 +508,19 @@
HV_CONFSTR_SWITCH_CONTROL = 14,
/** Chip revision level. */
- HV_CONFSTR_CHIP_REV = 15
+ HV_CONFSTR_CHIP_REV = 15,
+
+ /** CPU module part number. */
+ HV_CONFSTR_CPUMOD_PART_NUM = 16,
+
+ /** CPU module serial number. */
+ HV_CONFSTR_CPUMOD_SERIAL_NUM = 17,
+
+ /** CPU module revision level. */
+ HV_CONFSTR_CPUMOD_REV = 18,
+
+ /** Human-readable CPU module description. */
+ HV_CONFSTR_CPUMOD_DESC = 19
} HV_ConfstrQuery;
@@ -494,11 +540,16 @@
/** Tile coordinate */
typedef struct
{
+#ifndef __BIG_ENDIAN__
/** X coordinate, relative to supervisor's top-left coordinate */
int x;
/** Y coordinate, relative to supervisor's top-left coordinate */
int y;
+#else
+ int y;
+ int x;
+#endif
} HV_Coord;
@@ -649,6 +700,12 @@
* new page table does not need to contain any mapping for the
* hv_install_context address itself.
*
+ * At most one HV_CTX_PG_SM_* flag may be specified in "flags";
+ * if multiple flags are specified, HV_EINVAL is returned.
+ * Specifying none of the flags results in using the default page size.
+ * All cores participating in a given client must request the same
+ * page size, or the results are undefined.
+ *
* @param page_table Root of the page table.
* @param access PTE providing info on how to read the page table. This
* value must be consistent between multiple tiles sharing a page table,
@@ -667,8 +724,36 @@
#define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from
PL0. */
+#define HV_CTX_PG_SM_4K 0x10 /**< Use 4K small pages, if available. */
+#define HV_CTX_PG_SM_16K 0x20 /**< Use 16K small pages, if available. */
+#define HV_CTX_PG_SM_64K 0x40 /**< Use 64K small pages, if available. */
+#define HV_CTX_PG_SM_MASK 0xf0 /**< Mask of all possible small pages. */
+
#ifndef __ASSEMBLER__
+
+/** Set the number of pages ganged together by HV_PTE_SUPER at a
+ * particular level of the page table.
+ *
+ * The current TILE-Gx hardware only supports powers of four
+ * (i.e. log2_count must be a multiple of two), and the requested
+ * "super" page size must be less than the span of the next level in
+ * the page table. The largest size that can be requested is 64GB.
+ *
+ * The shift value is initially "0" for all page table levels,
+ * indicating that the HV_PTE_SUPER bit is effectively ignored.
+ *
+ * If you change the count from one non-zero value to another, the
+ * hypervisor will flush the entire TLB and TSB to avoid confusion.
+ *
+ * @param level Page table level (0, 1, or 2)
+ * @param log2_count Base-2 log of the number of pages to gang together,
+ * i.e. how much to shift left the base page size for the super page size.
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_set_pte_super_shift(int level, int log2_count);
+
+
/** Value returned from hv_inquire_context(). */
typedef struct
{
@@ -986,8 +1071,13 @@
/** A range of ASID values. */
typedef struct
{
+#ifndef __BIG_ENDIAN__
HV_ASID start; /**< First ASID in the range. */
unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */
+#else
+ unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */
+ HV_ASID start; /**< First ASID in the range. */
+#endif
} HV_ASIDRange;
/** Returns information about a range of ASIDs.
@@ -1238,11 +1328,14 @@
* with the existing priority pages) or "red/black" (if they don't).
* The bitmask provides information on which parts of the cache
* have been used for pinned pages so far on this tile; if (1 << N)
- * appears in the bitmask, that indicates that a page has been marked
- * "priority" whose PFN equals N, mod 8.
+ * appears in the bitmask, that indicates that a 4KB region of the
+ * cache starting at (N * 4KB) is in use by a "priority" page.
+ * The portion of cache used by a particular page can be computed
+ * by taking the page's PA, modulo CHIP_L2_CACHE_SIZE(), and setting
+ * all the "4KB" bits corresponding to the actual page size.
* @param bitmask A bitmap of priority page set values
*/
-void hv_set_caching(unsigned int bitmask);
+void hv_set_caching(unsigned long bitmask);
/** Zero out a specified number of pages.
@@ -1308,6 +1401,7 @@
/** Message recipient. */
typedef struct
{
+#ifndef __BIG_ENDIAN__
/** X coordinate, relative to supervisor's top-left coordinate */
unsigned int x:11;
@@ -1316,6 +1410,11 @@
/** Status of this recipient */
HV_Recip_State state:10;
+#else //__BIG_ENDIAN__
+ HV_Recip_State state:10;
+ unsigned int y:11;
+ unsigned int x:11;
+#endif
} HV_Recipient;
/** Send a message to a set of recipients.
@@ -1851,12 +1950,12 @@
#define HV_PTE_INDEX_USER 10 /**< Page is user-accessible */
#define HV_PTE_INDEX_ACCESSED 11 /**< Page has been accessed */
#define HV_PTE_INDEX_DIRTY 12 /**< Page has been written */
- /* Bits 13-15 are reserved for
+ /* Bits 13-14 are reserved for
future use. */
+#define HV_PTE_INDEX_SUPER 15 /**< Pages ganged together for TLB */
#define HV_PTE_INDEX_MODE 16 /**< Page mode; see HV_PTE_MODE_xxx */
#define HV_PTE_MODE_BITS 3 /**< Number of bits in mode */
- /* Bit 19 is reserved for
- future use. */
+#define HV_PTE_INDEX_CLIENT2 19 /**< Page client state 2 */
#define HV_PTE_INDEX_LOTAR 20 /**< Page's LOTAR; must be high bits
of word */
#define HV_PTE_LOTAR_BITS 12 /**< Number of bits in a LOTAR */
@@ -1869,15 +1968,6 @@
of word */
#define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */
-/** Position of the PFN field within the PTE (subset of the PTFN). */
-#define HV_PTE_INDEX_PFN (HV_PTE_INDEX_PTFN + (HV_LOG2_PAGE_SIZE_SMALL - \
- HV_LOG2_PAGE_TABLE_ALIGN))
-
-/** Length of the PFN field within the PTE (subset of the PTFN). */
-#define HV_PTE_INDEX_PFN_BITS (HV_PTE_INDEX_PTFN_BITS - \
- (HV_LOG2_PAGE_SIZE_SMALL - \
- HV_LOG2_PAGE_TABLE_ALIGN))
-
/*
* Legal values for the PTE's mode field
*/
@@ -1957,7 +2047,10 @@
/** Does this PTE map a page?
*
- * If this bit is set in the level-1 page table, the entry should be
+ * If this bit is set in a level-0 page table, the entry should be
+ * interpreted as a level-2 page table entry mapping a jumbo page.
+ *
+ * If this bit is set in a level-1 page table, the entry should be
* interpreted as a level-2 page table entry mapping a large page.
*
* This bit should not be modified by the client while PRESENT is set, as
@@ -1967,6 +2060,18 @@
*/
#define HV_PTE_PAGE (__HV_PTE_ONE << HV_PTE_INDEX_PAGE)
+/** Does this PTE implicitly reference multiple pages?
+ *
+ * If this bit is set in the page table (either in the level-2 page table,
+ * or in a higher level page table in conjunction with the PAGE bit)
+ * then the PTE specifies a range of contiguous pages, not a single page.
+ * The hv_set_pte_super_shift() allows you to specify the count for
+ * each level of the page table.
+ *
+ * Note: this bit is not supported on TILEPro systems.
+ */
+#define HV_PTE_SUPER (__HV_PTE_ONE << HV_PTE_INDEX_SUPER)
+
/** Is this a global (non-ASID) mapping?
*
* If this bit is set, the translations established by this PTE will
@@ -2046,6 +2151,13 @@
*/
#define HV_PTE_CLIENT1 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1)
+/** Client-private bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor.
+ */
+#define HV_PTE_CLIENT2 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT2)
+
/** Non-coherent (NC) bit in PTE.
*
* If this bit is set, the mapping that is set up will be non-coherent
@@ -2178,8 +2290,10 @@
*/
_HV_BIT(present, PRESENT)
_HV_BIT(page, PAGE)
+_HV_BIT(super, SUPER)
_HV_BIT(client0, CLIENT0)
_HV_BIT(client1, CLIENT1)
+_HV_BIT(client2, CLIENT2)
_HV_BIT(migrating, MIGRATING)
_HV_BIT(nc, NC)
_HV_BIT(readable, READABLE)
@@ -2222,40 +2336,11 @@
*
* This field contains the upper bits of the CPA (client physical
* address) of the target page; the complete CPA is this field with
- * HV_LOG2_PAGE_SIZE_SMALL zero bits appended to it.
+ * HV_LOG2_PAGE_TABLE_ALIGN zero bits appended to it.
*
- * For PTEs in a level-1 page table where the Page bit is set, the
- * CPA must be aligned modulo the large page size.
- */
-static __inline unsigned int
-hv_pte_get_pfn(const HV_PTE pte)
-{
- return pte.val >> HV_PTE_INDEX_PFN;
-}
-
-
-/** Set the page frame number into a PTE. See hv_pte_get_pfn. */
-static __inline HV_PTE
-hv_pte_set_pfn(HV_PTE pte, unsigned int val)
-{
- /*
- * Note that the use of "PTFN" in the next line is intentional; we
- * don't want any garbage lower bits left in that field.
- */
- pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS) - 1) << HV_PTE_INDEX_PTFN);
- pte.val |= (__hv64) val << HV_PTE_INDEX_PFN;
- return pte;
-}
-
-/** Get the page table frame number from the PTE.
- *
- * This field contains the upper bits of the CPA (client physical
- * address) of the target page table; the complete CPA is this field with
- * with HV_PAGE_TABLE_ALIGN zero bits appended to it.
- *
- * For PTEs in a level-1 page table when the Page bit is not set, the
- * CPA must be aligned modulo the sticter of HV_PAGE_TABLE_ALIGN and
- * the level-2 page table size.
+ * For all PTEs in the lowest-level page table, and for all PTEs with
+ * the Page bit set in all page tables, the CPA must be aligned modulo
+ * the relevant page size.
*/
static __inline unsigned long
hv_pte_get_ptfn(const HV_PTE pte)
@@ -2263,7 +2348,6 @@
return pte.val >> HV_PTE_INDEX_PTFN;
}
-
/** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */
static __inline HV_PTE
hv_pte_set_ptfn(HV_PTE pte, unsigned long val)
@@ -2273,6 +2357,20 @@
return pte;
}
+/** Get the client physical address from the PTE. See hv_pte_set_ptfn. */
+static __inline HV_PhysAddr
+hv_pte_get_pa(const HV_PTE pte)
+{
+ return (__hv64) hv_pte_get_ptfn(pte) << HV_LOG2_PAGE_TABLE_ALIGN;
+}
+
+/** Set the client physical address into a PTE. See hv_pte_get_ptfn. */
+static __inline HV_PTE
+hv_pte_set_pa(HV_PTE pte, HV_PhysAddr pa)
+{
+ return hv_pte_set_ptfn(pte, pa >> HV_LOG2_PAGE_TABLE_ALIGN);
+}
+
/** Get the remote tile caching this page.
*
@@ -2308,28 +2406,20 @@
#endif /* !__ASSEMBLER__ */
-/** Converts a client physical address to a pfn. */
-#define HV_CPA_TO_PFN(p) ((p) >> HV_LOG2_PAGE_SIZE_SMALL)
-
-/** Converts a pfn to a client physical address. */
-#define HV_PFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_SIZE_SMALL)
-
/** Converts a client physical address to a ptfn. */
#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN)
/** Converts a ptfn to a client physical address. */
#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN)
-/** Converts a ptfn to a pfn. */
-#define HV_PTFN_TO_PFN(p) \
- ((p) >> (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
-
-/** Converts a pfn to a ptfn. */
-#define HV_PFN_TO_PTFN(p) \
- ((p) << (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
-
#if CHIP_VA_WIDTH() > 32
+/*
+ * Note that we currently do not allow customizing the page size
+ * of the L0 pages, but fix them at 4GB, so we do not use the
+ * "_HV_xxx" nomenclature for the L0 macros.
+ */
+
/** Log number of HV_PTE entries in L0 page table */
#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN)
@@ -2359,69 +2449,104 @@
#endif /* CHIP_VA_WIDTH() > 32 */
/** Log number of HV_PTE entries in L1 page table */
-#define HV_LOG2_L1_ENTRIES (HV_LOG2_L1_SPAN - HV_LOG2_PAGE_SIZE_LARGE)
+#define _HV_LOG2_L1_ENTRIES(log2_page_size_large) \
+ (HV_LOG2_L1_SPAN - log2_page_size_large)
/** Number of HV_PTE entries in L1 page table */
-#define HV_L1_ENTRIES (1 << HV_LOG2_L1_ENTRIES)
+#define _HV_L1_ENTRIES(log2_page_size_large) \
+ (1 << _HV_LOG2_L1_ENTRIES(log2_page_size_large))
/** Log size of L1 page table in bytes */
-#define HV_LOG2_L1_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L1_ENTRIES)
+#define _HV_LOG2_L1_SIZE(log2_page_size_large) \
+ (HV_LOG2_PTE_SIZE + _HV_LOG2_L1_ENTRIES(log2_page_size_large))
/** Size of L1 page table in bytes */
-#define HV_L1_SIZE (1 << HV_LOG2_L1_SIZE)
+#define _HV_L1_SIZE(log2_page_size_large) \
+ (1 << _HV_LOG2_L1_SIZE(log2_page_size_large))
/** Log number of HV_PTE entries in level-2 page table */
-#define HV_LOG2_L2_ENTRIES (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL)
+#define _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \
+ (log2_page_size_large - log2_page_size_small)
/** Number of HV_PTE entries in level-2 page table */
-#define HV_L2_ENTRIES (1 << HV_LOG2_L2_ENTRIES)
+#define _HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \
+ (1 << _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small))
/** Log size of level-2 page table in bytes */
-#define HV_LOG2_L2_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L2_ENTRIES)
+#define _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small) \
+ (HV_LOG2_PTE_SIZE + \
+ _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small))
/** Size of level-2 page table in bytes */
-#define HV_L2_SIZE (1 << HV_LOG2_L2_SIZE)
+#define _HV_L2_SIZE(log2_page_size_large, log2_page_size_small) \
+ (1 << _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small))
#ifdef __ASSEMBLER__
#if CHIP_VA_WIDTH() > 32
/** Index in L1 for a specific VA */
-#define HV_L1_INDEX(va) \
- (((va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
+#define _HV_L1_INDEX(va, log2_page_size_large) \
+ (((va) >> log2_page_size_large) & (_HV_L1_ENTRIES(log2_page_size_large) - 1))
#else /* CHIP_VA_WIDTH() > 32 */
/** Index in L1 for a specific VA */
-#define HV_L1_INDEX(va) \
- (((va) >> HV_LOG2_PAGE_SIZE_LARGE))
+#define _HV_L1_INDEX(va, log2_page_size_large) \
+ (((va) >> log2_page_size_large))
#endif /* CHIP_VA_WIDTH() > 32 */
/** Index in level-2 page table for a specific VA */
-#define HV_L2_INDEX(va) \
- (((va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
+#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \
+ (((va) >> log2_page_size_small) & \
+ (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1))
#else /* __ASSEMBLER __ */
#if CHIP_VA_WIDTH() > 32
/** Index in L1 for a specific VA */
-#define HV_L1_INDEX(va) \
- (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
+#define _HV_L1_INDEX(va, log2_page_size_large) \
+ (((HV_VirtAddr)(va) >> log2_page_size_large) & \
+ (_HV_L1_ENTRIES(log2_page_size_large) - 1))
#else /* CHIP_VA_WIDTH() > 32 */
/** Index in L1 for a specific VA */
-#define HV_L1_INDEX(va) \
- (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE))
+#define _HV_L1_INDEX(va, log2_page_size_large) \
+ (((HV_VirtAddr)(va) >> log2_page_size_large))
#endif /* CHIP_VA_WIDTH() > 32 */
/** Index in level-2 page table for a specific VA */
-#define HV_L2_INDEX(va) \
- (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
+#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \
+ (((HV_VirtAddr)(va) >> log2_page_size_small) & \
+ (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1))
#endif /* __ASSEMBLER __ */
-#endif /* _TILE_HV_H */
+/** Position of the PFN field within the PTE (subset of the PTFN). */
+#define _HV_PTE_INDEX_PFN(log2_page_size) \
+ (HV_PTE_INDEX_PTFN + (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Length of the PFN field within the PTE (subset of the PTFN). */
+#define _HV_PTE_INDEX_PFN_BITS(log2_page_size) \
+ (HV_PTE_INDEX_PTFN_BITS - (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Converts a client physical address to a pfn. */
+#define _HV_CPA_TO_PFN(p, log2_page_size) ((p) >> log2_page_size)
+
+/** Converts a pfn to a client physical address. */
+#define _HV_PFN_TO_CPA(p, log2_page_size) \
+ (((HV_PhysAddr)(p)) << log2_page_size)
+
+/** Converts a ptfn to a pfn. */
+#define _HV_PTFN_TO_PFN(p, log2_page_size) \
+ ((p) >> (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Converts a pfn to a ptfn. */
+#define _HV_PFN_TO_PTFN(p, log2_page_size) \
+ ((p) << (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
+
+#endif /* _HV_HV_H */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 0d826fa..5de9924 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -9,10 +9,9 @@
intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o
obj-$(CONFIG_HARDWALL) += hardwall.o
-obj-$(CONFIG_TILEGX) += futex_64.o
obj-$(CONFIG_COMPAT) += compat.o compat_signal.o
obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o
obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
index ec91568..133c4b5 100644
--- a/arch/tile/kernel/entry.S
+++ b/arch/tile/kernel/entry.S
@@ -100,8 +100,9 @@
*/
STD_ENTRY(_cpu_idle)
movei r1, 1
+ IRQ_ENABLE_LOAD(r2, r3)
mtspr INTERRUPT_CRITICAL_SECTION, r1
- IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
+ IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */
mtspr INTERRUPT_CRITICAL_SECTION, zero
.global _cpu_idle_nap
_cpu_idle_nap:
diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
index 8c41891..20273ee 100644
--- a/arch/tile/kernel/hardwall.c
+++ b/arch/tile/kernel/hardwall.c
@@ -33,59 +33,157 @@
/*
- * This data structure tracks the rectangle data, etc., associated
- * one-to-one with a "struct file *" from opening HARDWALL_FILE.
+ * Implement a per-cpu "hardwall" resource class such as UDN or IPI.
+ * We use "hardwall" nomenclature throughout for historical reasons.
+ * The lock here controls access to the list data structure as well as
+ * to the items on the list.
+ */
+struct hardwall_type {
+ int index;
+ int is_xdn;
+ int is_idn;
+ int disabled;
+ const char *name;
+ struct list_head list;
+ spinlock_t lock;
+ struct proc_dir_entry *proc_dir;
+};
+
+enum hardwall_index {
+ HARDWALL_UDN = 0,
+#ifndef __tilepro__
+ HARDWALL_IDN = 1,
+ HARDWALL_IPI = 2,
+#endif
+ _HARDWALL_TYPES
+};
+
+static struct hardwall_type hardwall_types[] = {
+ { /* user-space access to UDN */
+ 0,
+ 1,
+ 0,
+ 0,
+ "udn",
+ LIST_HEAD_INIT(hardwall_types[HARDWALL_UDN].list),
+ __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_UDN].lock),
+ NULL
+ },
+#ifndef __tilepro__
+ { /* user-space access to IDN */
+ 1,
+ 1,
+ 1,
+ 1, /* disabled pending hypervisor support */
+ "idn",
+ LIST_HEAD_INIT(hardwall_types[HARDWALL_IDN].list),
+ __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IDN].lock),
+ NULL
+ },
+ { /* access to user-space IPI */
+ 2,
+ 0,
+ 0,
+ 0,
+ "ipi",
+ LIST_HEAD_INIT(hardwall_types[HARDWALL_IPI].list),
+ __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IPI].lock),
+ NULL
+ },
+#endif
+};
+
+/*
+ * This data structure tracks the cpu data, etc., associated
+ * one-to-one with a "struct file *" from opening a hardwall device file.
* Note that the file's private data points back to this structure.
*/
struct hardwall_info {
- struct list_head list; /* "rectangles" list */
+ struct list_head list; /* for hardwall_types.list */
struct list_head task_head; /* head of tasks in this hardwall */
- struct cpumask cpumask; /* cpus in the rectangle */
+ struct hardwall_type *type; /* type of this resource */
+ struct cpumask cpumask; /* cpus reserved */
+ int id; /* integer id for this hardwall */
+ int teardown_in_progress; /* are we tearing this one down? */
+
+ /* Remaining fields only valid for user-network resources. */
int ulhc_x; /* upper left hand corner x coord */
int ulhc_y; /* upper left hand corner y coord */
int width; /* rectangle width */
int height; /* rectangle height */
- int id; /* integer id for this hardwall */
- int teardown_in_progress; /* are we tearing this one down? */
+#if CHIP_HAS_REV1_XDN()
+ atomic_t xdn_pending_count; /* cores in phase 1 of drain */
+#endif
};
-/* Currently allocated hardwall rectangles */
-static LIST_HEAD(rectangles);
/* /proc/tile/hardwall */
static struct proc_dir_entry *hardwall_proc_dir;
/* Functions to manage files in /proc/tile/hardwall. */
-static void hardwall_add_proc(struct hardwall_info *rect);
-static void hardwall_remove_proc(struct hardwall_info *rect);
-
-/*
- * Guard changes to the hardwall data structures.
- * This could be finer grained (e.g. one lock for the list of hardwall
- * rectangles, then separate embedded locks for each one's list of tasks),
- * but there are subtle correctness issues when trying to start with
- * a task's "hardwall" pointer and lock the correct rectangle's embedded
- * lock in the presence of a simultaneous deactivation, so it seems
- * easier to have a single lock, given that none of these data
- * structures are touched very frequently during normal operation.
- */
-static DEFINE_SPINLOCK(hardwall_lock);
+static void hardwall_add_proc(struct hardwall_info *);
+static void hardwall_remove_proc(struct hardwall_info *);
/* Allow disabling UDN access. */
-static int udn_disabled;
static int __init noudn(char *str)
{
pr_info("User-space UDN access is disabled\n");
- udn_disabled = 1;
+ hardwall_types[HARDWALL_UDN].disabled = 1;
return 0;
}
early_param("noudn", noudn);
+#ifndef __tilepro__
+/* Allow disabling IDN access. */
+static int __init noidn(char *str)
+{
+ pr_info("User-space IDN access is disabled\n");
+ hardwall_types[HARDWALL_IDN].disabled = 1;
+ return 0;
+}
+early_param("noidn", noidn);
+
+/* Allow disabling IPI access. */
+static int __init noipi(char *str)
+{
+ pr_info("User-space IPI access is disabled\n");
+ hardwall_types[HARDWALL_IPI].disabled = 1;
+ return 0;
+}
+early_param("noipi", noipi);
+#endif
+
/*
- * Low-level primitives
+ * Low-level primitives for UDN/IDN
*/
+#ifdef __tilepro__
+#define mtspr_XDN(hwt, name, val) \
+ do { (void)(hwt); __insn_mtspr(SPR_UDN_##name, (val)); } while (0)
+#define mtspr_MPL_XDN(hwt, name, val) \
+ do { (void)(hwt); __insn_mtspr(SPR_MPL_UDN_##name, (val)); } while (0)
+#define mfspr_XDN(hwt, name) \
+ ((void)(hwt), __insn_mfspr(SPR_UDN_##name))
+#else
+#define mtspr_XDN(hwt, name, val) \
+ do { \
+ if ((hwt)->is_idn) \
+ __insn_mtspr(SPR_IDN_##name, (val)); \
+ else \
+ __insn_mtspr(SPR_UDN_##name, (val)); \
+ } while (0)
+#define mtspr_MPL_XDN(hwt, name, val) \
+ do { \
+ if ((hwt)->is_idn) \
+ __insn_mtspr(SPR_MPL_IDN_##name, (val)); \
+ else \
+ __insn_mtspr(SPR_MPL_UDN_##name, (val)); \
+ } while (0)
+#define mfspr_XDN(hwt, name) \
+ ((hwt)->is_idn ? __insn_mfspr(SPR_IDN_##name) : __insn_mfspr(SPR_UDN_##name))
+#endif
+
/* Set a CPU bit if the CPU is online. */
#define cpu_online_set(cpu, dst) do { \
if (cpu_online(cpu)) \
@@ -101,7 +199,7 @@
}
/* Compute the rectangle parameters and validate the cpumask. */
-static int setup_rectangle(struct hardwall_info *r, struct cpumask *mask)
+static int check_rectangle(struct hardwall_info *r, struct cpumask *mask)
{
int x, y, cpu, ulhc, lrhc;
@@ -114,8 +212,6 @@
r->ulhc_y = cpu_y(ulhc);
r->width = cpu_x(lrhc) - r->ulhc_x + 1;
r->height = cpu_y(lrhc) - r->ulhc_y + 1;
- cpumask_copy(&r->cpumask, mask);
- r->id = ulhc; /* The ulhc cpu id can be the hardwall id. */
/* Width and height must be positive */
if (r->width <= 0 || r->height <= 0)
@@ -128,7 +224,7 @@
return -EINVAL;
/*
- * Note that offline cpus can't be drained when this UDN
+ * Note that offline cpus can't be drained when this user network
* rectangle eventually closes. We used to detect this
* situation and print a warning, but it annoyed users and
* they ignored it anyway, so now we just return without a
@@ -137,16 +233,6 @@
return 0;
}
-/* Do the two given rectangles overlap on any cpu? */
-static int overlaps(struct hardwall_info *a, struct hardwall_info *b)
-{
- return a->ulhc_x + a->width > b->ulhc_x && /* A not to the left */
- b->ulhc_x + b->width > a->ulhc_x && /* B not to the left */
- a->ulhc_y + a->height > b->ulhc_y && /* A not above */
- b->ulhc_y + b->height > a->ulhc_y; /* B not above */
-}
-
-
/*
* Hardware management of hardwall setup, teardown, trapping,
* and enabling/disabling PL0 access to the networks.
@@ -157,23 +243,35 @@
N_PROTECT = (1 << 0),
E_PROTECT = (1 << 1),
S_PROTECT = (1 << 2),
- W_PROTECT = (1 << 3)
+ W_PROTECT = (1 << 3),
+ C_PROTECT = (1 << 4),
};
-static void enable_firewall_interrupts(void)
+static inline int xdn_which_interrupt(struct hardwall_type *hwt)
{
- arch_local_irq_unmask_now(INT_UDN_FIREWALL);
+#ifndef __tilepro__
+ if (hwt->is_idn)
+ return INT_IDN_FIREWALL;
+#endif
+ return INT_UDN_FIREWALL;
}
-static void disable_firewall_interrupts(void)
+static void enable_firewall_interrupts(struct hardwall_type *hwt)
{
- arch_local_irq_mask_now(INT_UDN_FIREWALL);
+ arch_local_irq_unmask_now(xdn_which_interrupt(hwt));
+}
+
+static void disable_firewall_interrupts(struct hardwall_type *hwt)
+{
+ arch_local_irq_mask_now(xdn_which_interrupt(hwt));
}
/* Set up hardwall on this cpu based on the passed hardwall_info. */
-static void hardwall_setup_ipi_func(void *info)
+static void hardwall_setup_func(void *info)
{
struct hardwall_info *r = info;
+ struct hardwall_type *hwt = r->type;
+
int cpu = smp_processor_id();
int x = cpu % smp_width;
int y = cpu / smp_width;
@@ -187,13 +285,12 @@
if (y == r->ulhc_y + r->height - 1)
bits |= S_PROTECT;
BUG_ON(bits == 0);
- __insn_mtspr(SPR_UDN_DIRECTION_PROTECT, bits);
- enable_firewall_interrupts();
-
+ mtspr_XDN(hwt, DIRECTION_PROTECT, bits);
+ enable_firewall_interrupts(hwt);
}
/* Set up all cpus on edge of rectangle to enable/disable hardwall SPRs. */
-static void hardwall_setup(struct hardwall_info *r)
+static void hardwall_protect_rectangle(struct hardwall_info *r)
{
int x, y, cpu, delta;
struct cpumask rect_cpus;
@@ -217,37 +314,50 @@
}
/* Then tell all the cpus to set up their protection SPR */
- on_each_cpu_mask(&rect_cpus, hardwall_setup_ipi_func, r, 1);
+ on_each_cpu_mask(&rect_cpus, hardwall_setup_func, r, 1);
}
void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
{
struct hardwall_info *rect;
+ struct hardwall_type *hwt;
struct task_struct *p;
struct siginfo info;
- int x, y;
int cpu = smp_processor_id();
int found_processes;
unsigned long flags;
-
struct pt_regs *old_regs = set_irq_regs(regs);
+
irq_enter();
+ /* Figure out which network trapped. */
+ switch (fault_num) {
+#ifndef __tilepro__
+ case INT_IDN_FIREWALL:
+ hwt = &hardwall_types[HARDWALL_IDN];
+ break;
+#endif
+ case INT_UDN_FIREWALL:
+ hwt = &hardwall_types[HARDWALL_UDN];
+ break;
+ default:
+ BUG();
+ }
+ BUG_ON(hwt->disabled);
+
/* This tile trapped a network access; find the rectangle. */
- x = cpu % smp_width;
- y = cpu / smp_width;
- spin_lock_irqsave(&hardwall_lock, flags);
- list_for_each_entry(rect, &rectangles, list) {
- if (contains(rect, x, y))
+ spin_lock_irqsave(&hwt->lock, flags);
+ list_for_each_entry(rect, &hwt->list, list) {
+ if (cpumask_test_cpu(cpu, &rect->cpumask))
break;
}
/*
* It shouldn't be possible not to find this cpu on the
* rectangle list, since only cpus in rectangles get hardwalled.
- * The hardwall is only removed after the UDN is drained.
+ * The hardwall is only removed after the user network is drained.
*/
- BUG_ON(&rect->list == &rectangles);
+ BUG_ON(&rect->list == &hwt->list);
/*
* If we already started teardown on this hardwall, don't worry;
@@ -255,30 +365,32 @@
* to quiesce.
*/
if (rect->teardown_in_progress) {
- pr_notice("cpu %d: detected hardwall violation %#lx"
+ pr_notice("cpu %d: detected %s hardwall violation %#lx"
" while teardown already in progress\n",
- cpu, (long) __insn_mfspr(SPR_UDN_DIRECTION_PROTECT));
+ cpu, hwt->name,
+ (long)mfspr_XDN(hwt, DIRECTION_PROTECT));
goto done;
}
/*
* Kill off any process that is activated in this rectangle.
* We bypass security to deliver the signal, since it must be
- * one of the activated processes that generated the UDN
+ * one of the activated processes that generated the user network
* message that caused this trap, and all the activated
* processes shared a single open file so are pretty tightly
* bound together from a security point of view to begin with.
*/
rect->teardown_in_progress = 1;
wmb(); /* Ensure visibility of rectangle before notifying processes. */
- pr_notice("cpu %d: detected hardwall violation %#lx...\n",
- cpu, (long) __insn_mfspr(SPR_UDN_DIRECTION_PROTECT));
+ pr_notice("cpu %d: detected %s hardwall violation %#lx...\n",
+ cpu, hwt->name, (long)mfspr_XDN(hwt, DIRECTION_PROTECT));
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_HARDWALL;
found_processes = 0;
- list_for_each_entry(p, &rect->task_head, thread.hardwall_list) {
- BUG_ON(p->thread.hardwall != rect);
+ list_for_each_entry(p, &rect->task_head,
+ thread.hardwall[hwt->index].list) {
+ BUG_ON(p->thread.hardwall[hwt->index].info != rect);
if (!(p->flags & PF_EXITING)) {
found_processes = 1;
pr_notice("hardwall: killing %d\n", p->pid);
@@ -289,7 +401,7 @@
pr_notice("hardwall: no associated processes!\n");
done:
- spin_unlock_irqrestore(&hardwall_lock, flags);
+ spin_unlock_irqrestore(&hwt->lock, flags);
/*
* We have to disable firewall interrupts now, or else when we
@@ -298,48 +410,87 @@
* haven't yet drained the network, and that would allow packets
* to cross out of the hardwall region.
*/
- disable_firewall_interrupts();
+ disable_firewall_interrupts(hwt);
irq_exit();
set_irq_regs(old_regs);
}
-/* Allow access from user space to the UDN. */
-void grant_network_mpls(void)
+/* Allow access from user space to the user network. */
+void grant_hardwall_mpls(struct hardwall_type *hwt)
{
- __insn_mtspr(SPR_MPL_UDN_ACCESS_SET_0, 1);
- __insn_mtspr(SPR_MPL_UDN_AVAIL_SET_0, 1);
- __insn_mtspr(SPR_MPL_UDN_COMPLETE_SET_0, 1);
- __insn_mtspr(SPR_MPL_UDN_TIMER_SET_0, 1);
+#ifndef __tilepro__
+ if (!hwt->is_xdn) {
+ __insn_mtspr(SPR_MPL_IPI_0_SET_0, 1);
+ return;
+ }
+#endif
+ mtspr_MPL_XDN(hwt, ACCESS_SET_0, 1);
+ mtspr_MPL_XDN(hwt, AVAIL_SET_0, 1);
+ mtspr_MPL_XDN(hwt, COMPLETE_SET_0, 1);
+ mtspr_MPL_XDN(hwt, TIMER_SET_0, 1);
#if !CHIP_HAS_REV1_XDN()
- __insn_mtspr(SPR_MPL_UDN_REFILL_SET_0, 1);
- __insn_mtspr(SPR_MPL_UDN_CA_SET_0, 1);
+ mtspr_MPL_XDN(hwt, REFILL_SET_0, 1);
+ mtspr_MPL_XDN(hwt, CA_SET_0, 1);
#endif
}
-/* Deny access from user space to the UDN. */
-void restrict_network_mpls(void)
+/* Deny access from user space to the user network. */
+void restrict_hardwall_mpls(struct hardwall_type *hwt)
{
- __insn_mtspr(SPR_MPL_UDN_ACCESS_SET_1, 1);
- __insn_mtspr(SPR_MPL_UDN_AVAIL_SET_1, 1);
- __insn_mtspr(SPR_MPL_UDN_COMPLETE_SET_1, 1);
- __insn_mtspr(SPR_MPL_UDN_TIMER_SET_1, 1);
+#ifndef __tilepro__
+ if (!hwt->is_xdn) {
+ __insn_mtspr(SPR_MPL_IPI_0_SET_1, 1);
+ return;
+ }
+#endif
+ mtspr_MPL_XDN(hwt, ACCESS_SET_1, 1);
+ mtspr_MPL_XDN(hwt, AVAIL_SET_1, 1);
+ mtspr_MPL_XDN(hwt, COMPLETE_SET_1, 1);
+ mtspr_MPL_XDN(hwt, TIMER_SET_1, 1);
#if !CHIP_HAS_REV1_XDN()
- __insn_mtspr(SPR_MPL_UDN_REFILL_SET_1, 1);
- __insn_mtspr(SPR_MPL_UDN_CA_SET_1, 1);
+ mtspr_MPL_XDN(hwt, REFILL_SET_1, 1);
+ mtspr_MPL_XDN(hwt, CA_SET_1, 1);
#endif
}
+/* Restrict or deny as necessary for the task we're switching to. */
+void hardwall_switch_tasks(struct task_struct *prev,
+ struct task_struct *next)
+{
+ int i;
+ for (i = 0; i < HARDWALL_TYPES; ++i) {
+ if (prev->thread.hardwall[i].info != NULL) {
+ if (next->thread.hardwall[i].info == NULL)
+ restrict_hardwall_mpls(&hardwall_types[i]);
+ } else if (next->thread.hardwall[i].info != NULL) {
+ grant_hardwall_mpls(&hardwall_types[i]);
+ }
+ }
+}
+
+/* Does this task have the right to IPI the given cpu? */
+int hardwall_ipi_valid(int cpu)
+{
+#ifdef __tilegx__
+ struct hardwall_info *info =
+ current->thread.hardwall[HARDWALL_IPI].info;
+ return info && cpumask_test_cpu(cpu, &info->cpumask);
+#else
+ return 0;
+#endif
+}
/*
- * Code to create, activate, deactivate, and destroy hardwall rectangles.
+ * Code to create, activate, deactivate, and destroy hardwall resources.
*/
-/* Create a hardwall for the given rectangle */
-static struct hardwall_info *hardwall_create(
- size_t size, const unsigned char __user *bits)
+/* Create a hardwall for the given resource */
+static struct hardwall_info *hardwall_create(struct hardwall_type *hwt,
+ size_t size,
+ const unsigned char __user *bits)
{
- struct hardwall_info *iter, *rect;
+ struct hardwall_info *iter, *info;
struct cpumask mask;
unsigned long flags;
int rc;
@@ -370,55 +521,62 @@
}
}
- /* Allocate a new rectangle optimistically. */
- rect = kmalloc(sizeof(struct hardwall_info),
+ /* Allocate a new hardwall_info optimistically. */
+ info = kmalloc(sizeof(struct hardwall_info),
GFP_KERNEL | __GFP_ZERO);
- if (rect == NULL)
+ if (info == NULL)
return ERR_PTR(-ENOMEM);
- INIT_LIST_HEAD(&rect->task_head);
+ INIT_LIST_HEAD(&info->task_head);
+ info->type = hwt;
/* Compute the rectangle size and validate that it's plausible. */
- rc = setup_rectangle(rect, &mask);
- if (rc != 0) {
- kfree(rect);
- return ERR_PTR(rc);
+ cpumask_copy(&info->cpumask, &mask);
+ info->id = find_first_bit(cpumask_bits(&mask), nr_cpumask_bits);
+ if (hwt->is_xdn) {
+ rc = check_rectangle(info, &mask);
+ if (rc != 0) {
+ kfree(info);
+ return ERR_PTR(rc);
+ }
}
/* Confirm it doesn't overlap and add it to the list. */
- spin_lock_irqsave(&hardwall_lock, flags);
- list_for_each_entry(iter, &rectangles, list) {
- if (overlaps(iter, rect)) {
- spin_unlock_irqrestore(&hardwall_lock, flags);
- kfree(rect);
+ spin_lock_irqsave(&hwt->lock, flags);
+ list_for_each_entry(iter, &hwt->list, list) {
+ if (cpumask_intersects(&iter->cpumask, &info->cpumask)) {
+ spin_unlock_irqrestore(&hwt->lock, flags);
+ kfree(info);
return ERR_PTR(-EBUSY);
}
}
- list_add_tail(&rect->list, &rectangles);
- spin_unlock_irqrestore(&hardwall_lock, flags);
+ list_add_tail(&info->list, &hwt->list);
+ spin_unlock_irqrestore(&hwt->lock, flags);
/* Set up appropriate hardwalling on all affected cpus. */
- hardwall_setup(rect);
+ if (hwt->is_xdn)
+ hardwall_protect_rectangle(info);
/* Create a /proc/tile/hardwall entry. */
- hardwall_add_proc(rect);
+ hardwall_add_proc(info);
- return rect;
+ return info;
}
/* Activate a given hardwall on this cpu for this process. */
-static int hardwall_activate(struct hardwall_info *rect)
+static int hardwall_activate(struct hardwall_info *info)
{
- int cpu, x, y;
+ int cpu;
unsigned long flags;
struct task_struct *p = current;
struct thread_struct *ts = &p->thread;
+ struct hardwall_type *hwt;
- /* Require a rectangle. */
- if (rect == NULL)
+ /* Require a hardwall. */
+ if (info == NULL)
return -ENODATA;
- /* Not allowed to activate a rectangle that is being torn down. */
- if (rect->teardown_in_progress)
+ /* Not allowed to activate a hardwall that is being torn down. */
+ if (info->teardown_in_progress)
return -EINVAL;
/*
@@ -428,78 +586,87 @@
if (cpumask_weight(&p->cpus_allowed) != 1)
return -EPERM;
- /* Make sure we are bound to a cpu in this rectangle. */
+ /* Make sure we are bound to a cpu assigned to this resource. */
cpu = smp_processor_id();
BUG_ON(cpumask_first(&p->cpus_allowed) != cpu);
- x = cpu_x(cpu);
- y = cpu_y(cpu);
- if (!contains(rect, x, y))
+ if (!cpumask_test_cpu(cpu, &info->cpumask))
return -EINVAL;
/* If we are already bound to this hardwall, it's a no-op. */
- if (ts->hardwall) {
- BUG_ON(ts->hardwall != rect);
+ hwt = info->type;
+ if (ts->hardwall[hwt->index].info) {
+ BUG_ON(ts->hardwall[hwt->index].info != info);
return 0;
}
- /* Success! This process gets to use the user networks on this cpu. */
- ts->hardwall = rect;
- spin_lock_irqsave(&hardwall_lock, flags);
- list_add(&ts->hardwall_list, &rect->task_head);
- spin_unlock_irqrestore(&hardwall_lock, flags);
- grant_network_mpls();
- printk(KERN_DEBUG "Pid %d (%s) activated for hardwall: cpu %d\n",
- p->pid, p->comm, cpu);
+ /* Success! This process gets to use the resource on this cpu. */
+ ts->hardwall[hwt->index].info = info;
+ spin_lock_irqsave(&hwt->lock, flags);
+ list_add(&ts->hardwall[hwt->index].list, &info->task_head);
+ spin_unlock_irqrestore(&hwt->lock, flags);
+ grant_hardwall_mpls(hwt);
+ printk(KERN_DEBUG "Pid %d (%s) activated for %s hardwall: cpu %d\n",
+ p->pid, p->comm, hwt->name, cpu);
return 0;
}
/*
- * Deactivate a task's hardwall. Must hold hardwall_lock.
+ * Deactivate a task's hardwall. Must hold lock for hardwall_type.
* This method may be called from free_task(), so we don't want to
* rely on too many fields of struct task_struct still being valid.
* We assume the cpus_allowed, pid, and comm fields are still valid.
*/
-static void _hardwall_deactivate(struct task_struct *task)
+static void _hardwall_deactivate(struct hardwall_type *hwt,
+ struct task_struct *task)
{
struct thread_struct *ts = &task->thread;
if (cpumask_weight(&task->cpus_allowed) != 1) {
- pr_err("pid %d (%s) releasing networks with"
+ pr_err("pid %d (%s) releasing %s hardwall with"
" an affinity mask containing %d cpus!\n",
- task->pid, task->comm,
+ task->pid, task->comm, hwt->name,
cpumask_weight(&task->cpus_allowed));
BUG();
}
- BUG_ON(ts->hardwall == NULL);
- ts->hardwall = NULL;
- list_del(&ts->hardwall_list);
+ BUG_ON(ts->hardwall[hwt->index].info == NULL);
+ ts->hardwall[hwt->index].info = NULL;
+ list_del(&ts->hardwall[hwt->index].list);
if (task == current)
- restrict_network_mpls();
+ restrict_hardwall_mpls(hwt);
}
/* Deactivate a task's hardwall. */
-int hardwall_deactivate(struct task_struct *task)
+static int hardwall_deactivate(struct hardwall_type *hwt,
+ struct task_struct *task)
{
unsigned long flags;
int activated;
- spin_lock_irqsave(&hardwall_lock, flags);
- activated = (task->thread.hardwall != NULL);
+ spin_lock_irqsave(&hwt->lock, flags);
+ activated = (task->thread.hardwall[hwt->index].info != NULL);
if (activated)
- _hardwall_deactivate(task);
- spin_unlock_irqrestore(&hardwall_lock, flags);
+ _hardwall_deactivate(hwt, task);
+ spin_unlock_irqrestore(&hwt->lock, flags);
if (!activated)
return -EINVAL;
- printk(KERN_DEBUG "Pid %d (%s) deactivated for hardwall: cpu %d\n",
- task->pid, task->comm, smp_processor_id());
+ printk(KERN_DEBUG "Pid %d (%s) deactivated for %s hardwall: cpu %d\n",
+ task->pid, task->comm, hwt->name, smp_processor_id());
return 0;
}
-/* Stop a UDN switch before draining the network. */
-static void stop_udn_switch(void *ignored)
+void hardwall_deactivate_all(struct task_struct *task)
+{
+ int i;
+ for (i = 0; i < HARDWALL_TYPES; ++i)
+ if (task->thread.hardwall[i].info)
+ hardwall_deactivate(&hardwall_types[i], task);
+}
+
+/* Stop the switch before draining the network. */
+static void stop_xdn_switch(void *arg)
{
#if !CHIP_HAS_REV1_XDN()
/* Freeze the switch and the demux. */
@@ -507,13 +674,71 @@
SPR_UDN_SP_FREEZE__SP_FRZ_MASK |
SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK |
SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK);
+#else
+ /*
+ * Drop all packets bound for the core or off the edge.
+ * We rely on the normal hardwall protection setup code
+ * to have set the low four bits to trigger firewall interrupts,
+ * and shift those bits up to trigger "drop on send" semantics,
+ * plus adding "drop on send to core" for all switches.
+ * In practice it seems the switches latch the DIRECTION_PROTECT
+ * SPR so they won't start dropping if they're already
+ * delivering the last message to the core, but it doesn't
+ * hurt to enable it here.
+ */
+ struct hardwall_type *hwt = arg;
+ unsigned long protect = mfspr_XDN(hwt, DIRECTION_PROTECT);
+ mtspr_XDN(hwt, DIRECTION_PROTECT, (protect | C_PROTECT) << 5);
#endif
}
-/* Drain all the state from a stopped switch. */
-static void drain_udn_switch(void *ignored)
+static void empty_xdn_demuxes(struct hardwall_type *hwt)
{
-#if !CHIP_HAS_REV1_XDN()
+#ifndef __tilepro__
+ if (hwt->is_idn) {
+ while (__insn_mfspr(SPR_IDN_DATA_AVAIL) & (1 << 0))
+ (void) __tile_idn0_receive();
+ while (__insn_mfspr(SPR_IDN_DATA_AVAIL) & (1 << 1))
+ (void) __tile_idn1_receive();
+ return;
+ }
+#endif
+ while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 0))
+ (void) __tile_udn0_receive();
+ while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 1))
+ (void) __tile_udn1_receive();
+ while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 2))
+ (void) __tile_udn2_receive();
+ while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 3))
+ (void) __tile_udn3_receive();
+}
+
+/* Drain all the state from a stopped switch. */
+static void drain_xdn_switch(void *arg)
+{
+ struct hardwall_info *info = arg;
+ struct hardwall_type *hwt = info->type;
+
+#if CHIP_HAS_REV1_XDN()
+ /*
+ * The switches have been configured to drop any messages
+ * destined for cores (or off the edge of the rectangle).
+ * But the current message may continue to be delivered,
+ * so we wait until all the cores have finished any pending
+ * messages before we stop draining.
+ */
+ int pending = mfspr_XDN(hwt, PENDING);
+ while (pending--) {
+ empty_xdn_demuxes(hwt);
+ if (hwt->is_idn)
+ __tile_idn_send(0);
+ else
+ __tile_udn_send(0);
+ }
+ atomic_dec(&info->xdn_pending_count);
+ while (atomic_read(&info->xdn_pending_count))
+ empty_xdn_demuxes(hwt);
+#else
int i;
int from_tile_words, ca_count;
@@ -533,15 +758,7 @@
(void) __insn_mfspr(SPR_UDN_DEMUX_WRITE_FIFO);
/* Empty out demuxes. */
- while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 0))
- (void) __tile_udn0_receive();
- while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 1))
- (void) __tile_udn1_receive();
- while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 2))
- (void) __tile_udn2_receive();
- while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 3))
- (void) __tile_udn3_receive();
- BUG_ON((__insn_mfspr(SPR_UDN_DATA_AVAIL) & 0xF) != 0);
+ empty_xdn_demuxes(hwt);
/* Empty out catch all. */
ca_count = __insn_mfspr(SPR_UDN_DEMUX_CA_COUNT);
@@ -563,21 +780,25 @@
#endif
}
-/* Reset random UDN state registers at boot up and during hardwall teardown. */
-void reset_network_state(void)
+/* Reset random XDN state registers at boot up and during hardwall teardown. */
+static void reset_xdn_network_state(struct hardwall_type *hwt)
{
-#if !CHIP_HAS_REV1_XDN()
- /* Reset UDN coordinates to their standard value */
- unsigned int cpu = smp_processor_id();
- unsigned int x = cpu % smp_width;
- unsigned int y = cpu / smp_width;
-#endif
-
- if (udn_disabled)
+ if (hwt->disabled)
return;
+ /* Clear out other random registers so we have a clean slate. */
+ mtspr_XDN(hwt, DIRECTION_PROTECT, 0);
+ mtspr_XDN(hwt, AVAIL_EN, 0);
+ mtspr_XDN(hwt, DEADLOCK_TIMEOUT, 0);
+
#if !CHIP_HAS_REV1_XDN()
- __insn_mtspr(SPR_UDN_TILE_COORD, (x << 18) | (y << 7));
+ /* Reset UDN coordinates to their standard value */
+ {
+ unsigned int cpu = smp_processor_id();
+ unsigned int x = cpu % smp_width;
+ unsigned int y = cpu / smp_width;
+ __insn_mtspr(SPR_UDN_TILE_COORD, (x << 18) | (y << 7));
+ }
/* Set demux tags to predefined values and enable them. */
__insn_mtspr(SPR_UDN_TAG_VALID, 0xf);
@@ -585,56 +806,50 @@
__insn_mtspr(SPR_UDN_TAG_1, (1 << 1));
__insn_mtspr(SPR_UDN_TAG_2, (1 << 2));
__insn_mtspr(SPR_UDN_TAG_3, (1 << 3));
-#endif
- /* Clear out other random registers so we have a clean slate. */
- __insn_mtspr(SPR_UDN_AVAIL_EN, 0);
- __insn_mtspr(SPR_UDN_DEADLOCK_TIMEOUT, 0);
-#if !CHIP_HAS_REV1_XDN()
+ /* Set other rev0 random registers to a clean state. */
__insn_mtspr(SPR_UDN_REFILL_EN, 0);
__insn_mtspr(SPR_UDN_DEMUX_QUEUE_SEL, 0);
__insn_mtspr(SPR_UDN_SP_FIFO_SEL, 0);
-#endif
/* Start the switch and demux. */
-#if !CHIP_HAS_REV1_XDN()
__insn_mtspr(SPR_UDN_SP_FREEZE, 0);
#endif
}
-/* Restart a UDN switch after draining. */
-static void restart_udn_switch(void *ignored)
+void reset_network_state(void)
{
- reset_network_state();
-
- /* Disable firewall interrupts. */
- __insn_mtspr(SPR_UDN_DIRECTION_PROTECT, 0);
- disable_firewall_interrupts();
+ reset_xdn_network_state(&hardwall_types[HARDWALL_UDN]);
+#ifndef __tilepro__
+ reset_xdn_network_state(&hardwall_types[HARDWALL_IDN]);
+#endif
}
-/* Build a struct cpumask containing all valid tiles in bounding rectangle. */
-static void fill_mask(struct hardwall_info *r, struct cpumask *result)
+/* Restart an XDN switch after draining. */
+static void restart_xdn_switch(void *arg)
{
- int x, y, cpu;
+ struct hardwall_type *hwt = arg;
- cpumask_clear(result);
+#if CHIP_HAS_REV1_XDN()
+ /* One last drain step to avoid races with injection and draining. */
+ empty_xdn_demuxes(hwt);
+#endif
- cpu = r->ulhc_y * smp_width + r->ulhc_x;
- for (y = 0; y < r->height; ++y, cpu += smp_width - r->width) {
- for (x = 0; x < r->width; ++x, ++cpu)
- cpu_online_set(cpu, result);
- }
+ reset_xdn_network_state(hwt);
+
+ /* Disable firewall interrupts. */
+ disable_firewall_interrupts(hwt);
}
/* Last reference to a hardwall is gone, so clear the network. */
-static void hardwall_destroy(struct hardwall_info *rect)
+static void hardwall_destroy(struct hardwall_info *info)
{
struct task_struct *task;
+ struct hardwall_type *hwt;
unsigned long flags;
- struct cpumask mask;
- /* Make sure this file actually represents a rectangle. */
- if (rect == NULL)
+ /* Make sure this file actually represents a hardwall. */
+ if (info == NULL)
return;
/*
@@ -644,39 +859,53 @@
* deactivate any remaining tasks before freeing the
* hardwall_info object itself.
*/
- spin_lock_irqsave(&hardwall_lock, flags);
- list_for_each_entry(task, &rect->task_head, thread.hardwall_list)
- _hardwall_deactivate(task);
- spin_unlock_irqrestore(&hardwall_lock, flags);
+ hwt = info->type;
+ info->teardown_in_progress = 1;
+ spin_lock_irqsave(&hwt->lock, flags);
+ list_for_each_entry(task, &info->task_head,
+ thread.hardwall[hwt->index].list)
+ _hardwall_deactivate(hwt, task);
+ spin_unlock_irqrestore(&hwt->lock, flags);
- /* Drain the UDN. */
- printk(KERN_DEBUG "Clearing hardwall rectangle %dx%d %d,%d\n",
- rect->width, rect->height, rect->ulhc_x, rect->ulhc_y);
- fill_mask(rect, &mask);
- on_each_cpu_mask(&mask, stop_udn_switch, NULL, 1);
- on_each_cpu_mask(&mask, drain_udn_switch, NULL, 1);
+ if (hwt->is_xdn) {
+ /* Configure the switches for draining the user network. */
+ printk(KERN_DEBUG
+ "Clearing %s hardwall rectangle %dx%d %d,%d\n",
+ hwt->name, info->width, info->height,
+ info->ulhc_x, info->ulhc_y);
+ on_each_cpu_mask(&info->cpumask, stop_xdn_switch, hwt, 1);
- /* Restart switch and disable firewall. */
- on_each_cpu_mask(&mask, restart_udn_switch, NULL, 1);
+ /* Drain the network. */
+#if CHIP_HAS_REV1_XDN()
+ atomic_set(&info->xdn_pending_count,
+ cpumask_weight(&info->cpumask));
+ on_each_cpu_mask(&info->cpumask, drain_xdn_switch, info, 0);
+#else
+ on_each_cpu_mask(&info->cpumask, drain_xdn_switch, info, 1);
+#endif
+
+ /* Restart switch and disable firewall. */
+ on_each_cpu_mask(&info->cpumask, restart_xdn_switch, hwt, 1);
+ }
/* Remove the /proc/tile/hardwall entry. */
- hardwall_remove_proc(rect);
+ hardwall_remove_proc(info);
- /* Now free the rectangle from the list. */
- spin_lock_irqsave(&hardwall_lock, flags);
- BUG_ON(!list_empty(&rect->task_head));
- list_del(&rect->list);
- spin_unlock_irqrestore(&hardwall_lock, flags);
- kfree(rect);
+ /* Now free the hardwall from the list. */
+ spin_lock_irqsave(&hwt->lock, flags);
+ BUG_ON(!list_empty(&info->task_head));
+ list_del(&info->list);
+ spin_unlock_irqrestore(&hwt->lock, flags);
+ kfree(info);
}
static int hardwall_proc_show(struct seq_file *sf, void *v)
{
- struct hardwall_info *rect = sf->private;
+ struct hardwall_info *info = sf->private;
char buf[256];
- int rc = cpulist_scnprintf(buf, sizeof(buf), &rect->cpumask);
+ int rc = cpulist_scnprintf(buf, sizeof(buf), &info->cpumask);
buf[rc++] = '\n';
seq_write(sf, buf, rc);
return 0;
@@ -695,31 +924,45 @@
.release = single_release,
};
-static void hardwall_add_proc(struct hardwall_info *rect)
+static void hardwall_add_proc(struct hardwall_info *info)
{
char buf[64];
- snprintf(buf, sizeof(buf), "%d", rect->id);
- proc_create_data(buf, 0444, hardwall_proc_dir,
- &hardwall_proc_fops, rect);
+ snprintf(buf, sizeof(buf), "%d", info->id);
+ proc_create_data(buf, 0444, info->type->proc_dir,
+ &hardwall_proc_fops, info);
}
-static void hardwall_remove_proc(struct hardwall_info *rect)
+static void hardwall_remove_proc(struct hardwall_info *info)
{
char buf[64];
- snprintf(buf, sizeof(buf), "%d", rect->id);
- remove_proc_entry(buf, hardwall_proc_dir);
+ snprintf(buf, sizeof(buf), "%d", info->id);
+ remove_proc_entry(buf, info->type->proc_dir);
}
int proc_pid_hardwall(struct task_struct *task, char *buffer)
{
- struct hardwall_info *rect = task->thread.hardwall;
- return rect ? sprintf(buffer, "%d\n", rect->id) : 0;
+ int i;
+ int n = 0;
+ for (i = 0; i < HARDWALL_TYPES; ++i) {
+ struct hardwall_info *info = task->thread.hardwall[i].info;
+ if (info)
+ n += sprintf(&buffer[n], "%s: %d\n",
+ info->type->name, info->id);
+ }
+ return n;
}
void proc_tile_hardwall_init(struct proc_dir_entry *root)
{
- if (!udn_disabled)
- hardwall_proc_dir = proc_mkdir("hardwall", root);
+ int i;
+ for (i = 0; i < HARDWALL_TYPES; ++i) {
+ struct hardwall_type *hwt = &hardwall_types[i];
+ if (hwt->disabled)
+ continue;
+ if (hardwall_proc_dir == NULL)
+ hardwall_proc_dir = proc_mkdir("hardwall", root);
+ hwt->proc_dir = proc_mkdir(hwt->name, hardwall_proc_dir);
+ }
}
@@ -729,34 +972,45 @@
static long hardwall_ioctl(struct file *file, unsigned int a, unsigned long b)
{
- struct hardwall_info *rect = file->private_data;
+ struct hardwall_info *info = file->private_data;
+ int minor = iminor(file->f_mapping->host);
+ struct hardwall_type* hwt;
if (_IOC_TYPE(a) != HARDWALL_IOCTL_BASE)
return -EINVAL;
+ BUILD_BUG_ON(HARDWALL_TYPES != _HARDWALL_TYPES);
+ BUILD_BUG_ON(HARDWALL_TYPES !=
+ sizeof(hardwall_types)/sizeof(hardwall_types[0]));
+
+ if (minor < 0 || minor >= HARDWALL_TYPES)
+ return -EINVAL;
+ hwt = &hardwall_types[minor];
+ WARN_ON(info && hwt != info->type);
+
switch (_IOC_NR(a)) {
case _HARDWALL_CREATE:
- if (udn_disabled)
+ if (hwt->disabled)
return -ENOSYS;
- if (rect != NULL)
+ if (info != NULL)
return -EALREADY;
- rect = hardwall_create(_IOC_SIZE(a),
- (const unsigned char __user *)b);
- if (IS_ERR(rect))
- return PTR_ERR(rect);
- file->private_data = rect;
+ info = hardwall_create(hwt, _IOC_SIZE(a),
+ (const unsigned char __user *)b);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+ file->private_data = info;
return 0;
case _HARDWALL_ACTIVATE:
- return hardwall_activate(rect);
+ return hardwall_activate(info);
case _HARDWALL_DEACTIVATE:
- if (current->thread.hardwall != rect)
+ if (current->thread.hardwall[hwt->index].info != info)
return -EINVAL;
- return hardwall_deactivate(current);
+ return hardwall_deactivate(hwt, current);
case _HARDWALL_GET_ID:
- return rect ? rect->id : -EINVAL;
+ return info ? info->id : -EINVAL;
default:
return -EINVAL;
@@ -775,26 +1029,28 @@
/* The user process closed the file; revoke access to user networks. */
static int hardwall_flush(struct file *file, fl_owner_t owner)
{
- struct hardwall_info *rect = file->private_data;
+ struct hardwall_info *info = file->private_data;
struct task_struct *task, *tmp;
unsigned long flags;
- if (rect) {
+ if (info) {
/*
* NOTE: if multiple threads are activated on this hardwall
* file, the other threads will continue having access to the
- * UDN until they are context-switched out and back in again.
+ * user network until they are context-switched out and back
+ * in again.
*
* NOTE: A NULL files pointer means the task is being torn
* down, so in that case we also deactivate it.
*/
- spin_lock_irqsave(&hardwall_lock, flags);
- list_for_each_entry_safe(task, tmp, &rect->task_head,
- thread.hardwall_list) {
+ struct hardwall_type *hwt = info->type;
+ spin_lock_irqsave(&hwt->lock, flags);
+ list_for_each_entry_safe(task, tmp, &info->task_head,
+ thread.hardwall[hwt->index].list) {
if (task->files == owner || task->files == NULL)
- _hardwall_deactivate(task);
+ _hardwall_deactivate(hwt, task);
}
- spin_unlock_irqrestore(&hardwall_lock, flags);
+ spin_unlock_irqrestore(&hwt->lock, flags);
}
return 0;
@@ -824,11 +1080,11 @@
int rc;
dev_t dev;
- rc = alloc_chrdev_region(&dev, 0, 1, "hardwall");
+ rc = alloc_chrdev_region(&dev, 0, HARDWALL_TYPES, "hardwall");
if (rc < 0)
return rc;
cdev_init(&hardwall_dev, &dev_hardwall_fops);
- rc = cdev_add(&hardwall_dev, dev, 1);
+ rc = cdev_add(&hardwall_dev, dev, HARDWALL_TYPES);
if (rc < 0)
return rc;
diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S
index 1a39b7c..f71bfee 100644
--- a/arch/tile/kernel/head_32.S
+++ b/arch/tile/kernel/head_32.S
@@ -69,7 +69,7 @@
}
{
moveli lr, lo16(1f)
- move r5, zero
+ moveli r5, CTX_PAGE_FLAG
}
{
auli lr, lr, ha16(1f)
@@ -141,11 +141,11 @@
.macro PTE va, cpa, bits1, no_org=0
.ifeq \no_org
- .org swapper_pg_dir + HV_L1_INDEX(\va) * HV_PTE_SIZE
+ .org swapper_pg_dir + PGD_INDEX(\va) * HV_PTE_SIZE
.endif
.word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \
(HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
- .word (\bits1) | (HV_CPA_TO_PFN(\cpa) << (HV_PTE_INDEX_PFN - 32))
+ .word (\bits1) | (HV_CPA_TO_PTFN(\cpa) << (HV_PTE_INDEX_PTFN - 32))
.endm
__PAGE_ALIGNED_DATA
@@ -166,7 +166,7 @@
/* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */
PTE MEM_SV_INTRPT, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
(1 << (HV_PTE_INDEX_EXECUTABLE - 32))
- .org swapper_pg_dir + HV_L1_SIZE
+ .org swapper_pg_dir + PGDIR_SIZE
END(swapper_pg_dir)
/*
diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S
index 6bc3a93..f9a2734 100644
--- a/arch/tile/kernel/head_64.S
+++ b/arch/tile/kernel/head_64.S
@@ -114,7 +114,7 @@
shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET)
}
{
- move r3, zero
+ moveli r3, CTX_PAGE_FLAG
j hv_install_context
}
1:
@@ -210,19 +210,19 @@
.macro PTE cpa, bits1
.quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\
HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\
- (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN)
+ (\bits1) | (HV_CPA_TO_PTFN(\cpa) << HV_PTE_INDEX_PTFN)
.endm
__PAGE_ALIGNED_DATA
.align PAGE_SIZE
ENTRY(swapper_pg_dir)
- .org swapper_pg_dir + HV_L0_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
+ .org swapper_pg_dir + PGD_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
.Lsv_data_pmd:
.quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */
- .org swapper_pg_dir + HV_L0_INDEX(MEM_SV_START) * HV_PTE_SIZE
+ .org swapper_pg_dir + PGD_INDEX(MEM_SV_START) * HV_PTE_SIZE
.Lsv_code_pmd:
.quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */
- .org swapper_pg_dir + HV_L0_SIZE
+ .org swapper_pg_dir + SIZEOF_PGD
END(swapper_pg_dir)
.align HV_PAGE_TABLE_ALIGN
@@ -233,11 +233,11 @@
* permissions later.
*/
.set addr, 0
- .rept HV_L1_ENTRIES
+ .rept PTRS_PER_PMD
PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE
- .set addr, addr + HV_PAGE_SIZE_LARGE
+ .set addr, addr + HPAGE_SIZE
.endr
- .org temp_data_pmd + HV_L1_SIZE
+ .org temp_data_pmd + SIZEOF_PMD
END(temp_data_pmd)
.align HV_PAGE_TABLE_ALIGN
@@ -248,11 +248,11 @@
* permissions later.
*/
.set addr, 0
- .rept HV_L1_ENTRIES
+ .rept PTRS_PER_PMD
PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE
- .set addr, addr + HV_PAGE_SIZE_LARGE
+ .set addr, addr + HPAGE_SIZE
.endr
- .org temp_code_pmd + HV_L1_SIZE
+ .org temp_code_pmd + SIZEOF_PMD
END(temp_code_pmd)
/*
diff --git a/arch/tile/kernel/hvglue.lds b/arch/tile/kernel/hvglue.lds
index 2b7cd0a..d44c5a6 100644
--- a/arch/tile/kernel/hvglue.lds
+++ b/arch/tile/kernel/hvglue.lds
@@ -55,4 +55,5 @@
hv_inquire_realpa = TEXT_OFFSET + 0x106c0;
hv_flush_all = TEXT_OFFSET + 0x106e0;
hv_get_ipi_pte = TEXT_OFFSET + 0x10700;
-hv_glue_internals = TEXT_OFFSET + 0x10720;
+hv_set_pte_super_shift = TEXT_OFFSET + 0x10720;
+hv_glue_internals = TEXT_OFFSET + 0x10740;
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S
index 30ae76e..7c06d59 100644
--- a/arch/tile/kernel/intvec_64.S
+++ b/arch/tile/kernel/intvec_64.S
@@ -220,7 +220,9 @@
* This routine saves just the first four registers, plus the
* stack context so we can do proper backtracing right away,
* and defers to handle_interrupt to save the rest.
- * The backtracer needs pc, ex1, lr, sp, r52, and faultnum.
+ * The backtracer needs pc, ex1, lr, sp, r52, and faultnum,
+ * and needs sp set to its final location at the bottom of
+ * the stack frame.
*/
addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
wh64 r0 /* cache line 7 */
@@ -450,23 +452,6 @@
push_reg r5, r52
st r52, r4
- /* Load tp with our per-cpu offset. */
-#ifdef CONFIG_SMP
- {
- mfspr r20, SPR_SYSTEM_SAVE_K_0
- moveli r21, hw2_last(__per_cpu_offset)
- }
- {
- shl16insli r21, r21, hw1(__per_cpu_offset)
- bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
- }
- shl16insli r21, r21, hw0(__per_cpu_offset)
- shl3add r20, r20, r21
- ld tp, r20
-#else
- move tp, zero
-#endif
-
/*
* If we will be returning to the kernel, we will need to
* reset the interrupt masks to the state they had before.
@@ -489,6 +474,44 @@
.endif
st r21, r32
+ /*
+ * we've captured enough state to the stack (including in
+ * particular our EX_CONTEXT state) that we can now release
+ * the interrupt critical section and replace it with our
+ * standard "interrupts disabled" mask value. This allows
+ * synchronous interrupts (and profile interrupts) to punch
+ * through from this point onwards.
+ *
+ * It's important that no code before this point touch memory
+ * other than our own stack (to keep the invariant that this
+ * is all that gets touched under ICS), and that no code after
+ * this point reference any interrupt-specific SPR, in particular
+ * the EX_CONTEXT_K_ values.
+ */
+ .ifc \function,handle_nmi
+ IRQ_DISABLE_ALL(r20)
+ .else
+ IRQ_DISABLE(r20, r21)
+ .endif
+ mtspr INTERRUPT_CRITICAL_SECTION, zero
+
+ /* Load tp with our per-cpu offset. */
+#ifdef CONFIG_SMP
+ {
+ mfspr r20, SPR_SYSTEM_SAVE_K_0
+ moveli r21, hw2_last(__per_cpu_offset)
+ }
+ {
+ shl16insli r21, r21, hw1(__per_cpu_offset)
+ bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
+ }
+ shl16insli r21, r21, hw0(__per_cpu_offset)
+ shl3add r20, r20, r21
+ ld tp, r20
+#else
+ move tp, zero
+#endif
+
#ifdef __COLLECT_LINKER_FEEDBACK__
/*
* Notify the feedback routines that we were in the
@@ -513,21 +536,6 @@
#endif
/*
- * we've captured enough state to the stack (including in
- * particular our EX_CONTEXT state) that we can now release
- * the interrupt critical section and replace it with our
- * standard "interrupts disabled" mask value. This allows
- * synchronous interrupts (and profile interrupts) to punch
- * through from this point onwards.
- */
- .ifc \function,handle_nmi
- IRQ_DISABLE_ALL(r20)
- .else
- IRQ_DISABLE(r20, r21)
- .endif
- mtspr INTERRUPT_CRITICAL_SECTION, zero
-
- /*
* Prepare the first 256 stack bytes to be rapidly accessible
* without having to fetch the background data.
*/
@@ -736,9 +744,10 @@
beqzt r30, .Lrestore_regs
j 3f
2: TRACE_IRQS_ON
+ IRQ_ENABLE_LOAD(r20, r21)
movei r0, 1
mtspr INTERRUPT_CRITICAL_SECTION, r0
- IRQ_ENABLE(r20, r21)
+ IRQ_ENABLE_APPLY(r20, r21)
beqzt r30, .Lrestore_regs
3:
@@ -755,7 +764,6 @@
* that will save some cycles if this turns out to be a syscall.
*/
.Lrestore_regs:
- FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */
/*
* Rotate so we have one high bit and one low bit to test.
@@ -1249,7 +1257,7 @@
int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign
int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault
int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault
- int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr
+ int_hand INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap
int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap
int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt
int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr
diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c
index 6255f2e..f0b54a9 100644
--- a/arch/tile/kernel/machine_kexec.c
+++ b/arch/tile/kernel/machine_kexec.c
@@ -31,6 +31,8 @@
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <asm/checksum.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
#include <hv/hypervisor.h>
@@ -222,11 +224,22 @@
return alloc_pages_node(0, gfp_mask, order);
}
+/*
+ * Address range in which pa=va mapping is set in setup_quasi_va_is_pa().
+ * For tilepro, PAGE_OFFSET is used since this is the largest possbile value
+ * for tilepro, while for tilegx, we limit it to entire middle level page
+ * table which we assume has been allocated and is undoubtedly large enough.
+ */
+#ifndef __tilegx__
+#define QUASI_VA_IS_PA_ADDR_RANGE PAGE_OFFSET
+#else
+#define QUASI_VA_IS_PA_ADDR_RANGE PGDIR_SIZE
+#endif
+
static void setup_quasi_va_is_pa(void)
{
- HV_PTE *pgtable;
HV_PTE pte;
- int i;
+ unsigned long i;
/*
* Flush our TLB to prevent conflicts between the previous contents
@@ -234,16 +247,22 @@
*/
local_flush_tlb_all();
- /* setup VA is PA, at least up to PAGE_OFFSET */
-
- pgtable = (HV_PTE *)current->mm->pgd;
+ /*
+ * setup VA is PA, at least up to QUASI_VA_IS_PA_ADDR_RANGE.
+ * Note here we assume that level-1 page table is defined by
+ * HPAGE_SIZE.
+ */
pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE);
pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
-
- for (i = 0; i < pgd_index(PAGE_OFFSET); i++) {
+ for (i = 0; i < (QUASI_VA_IS_PA_ADDR_RANGE >> HPAGE_SHIFT); i++) {
+ unsigned long vaddr = i << HPAGE_SHIFT;
+ pgd_t *pgd = pgd_offset(current->mm, vaddr);
+ pud_t *pud = pud_offset(pgd, vaddr);
+ pte_t *ptep = (pte_t *) pmd_offset(pud, vaddr);
unsigned long pfn = i << (HPAGE_SHIFT - PAGE_SHIFT);
+
if (pfn_valid(pfn))
- __set_pte(&pgtable[i], pfn_pte(pfn, pte));
+ __set_pte(ptep, pfn_pte(pfn, pte));
}
}
@@ -251,6 +270,7 @@
void machine_kexec(struct kimage *image)
{
void *reboot_code_buffer;
+ pte_t *ptep;
void (*rnk)(unsigned long, void *, unsigned long)
__noreturn;
@@ -266,8 +286,10 @@
*/
homecache_change_page_home(image->control_code_page, 0,
smp_processor_id());
- reboot_code_buffer = vmap(&image->control_code_page, 1, 0,
- __pgprot(_PAGE_KERNEL | _PAGE_EXECUTABLE));
+ reboot_code_buffer = page_address(image->control_code_page);
+ BUG_ON(reboot_code_buffer == NULL);
+ ptep = virt_to_pte(NULL, (unsigned long)reboot_code_buffer);
+ __set_pte(ptep, pte_mkexec(*ptep));
memcpy(reboot_code_buffer, relocate_new_kernel,
relocate_new_kernel_size);
__flush_icache_range(
diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c
index 98d4769..001cbfa 100644
--- a/arch/tile/kernel/module.c
+++ b/arch/tile/kernel/module.c
@@ -159,7 +159,17 @@
switch (ELF_R_TYPE(rel[i].r_info)) {
-#define MUNGE(func) (*location = ((*location & ~func(-1)) | func(value)))
+#ifdef __LITTLE_ENDIAN
+# define MUNGE(func) \
+ (*location = ((*location & ~func(-1)) | func(value)))
+#else
+/*
+ * Instructions are always little-endian, so when we read them as data,
+ * we have to swap them around before and after modifying them.
+ */
+# define MUNGE(func) \
+ (*location = swab64((swab64(*location) & ~func(-1)) | func(value)))
+#endif
#ifndef __tilegx__
case R_TILE_32:
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
index 446a7f5..dafc447 100644
--- a/arch/tile/kernel/proc.c
+++ b/arch/tile/kernel/proc.c
@@ -22,6 +22,7 @@
#include <linux/proc_fs.h>
#include <linux/sysctl.h>
#include <linux/hardirq.h>
+#include <linux/hugetlb.h>
#include <linux/mman.h>
#include <asm/unaligned.h>
#include <asm/pgtable.h>
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index f572c19..ba1023d 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -128,10 +128,10 @@
* Calling deactivate here just frees up the data structures.
* If the task we're freeing held the last reference to a
* hardwall fd, it would have been released prior to this point
- * anyway via exit_files(), and "hardwall" would be NULL by now.
+ * anyway via exit_files(), and the hardwall_task.info pointers
+ * would be NULL by now.
*/
- if (info->task->thread.hardwall)
- hardwall_deactivate(info->task);
+ hardwall_deactivate_all(info->task);
#endif
if (step_state) {
@@ -245,7 +245,8 @@
#ifdef CONFIG_HARDWALL
/* New thread does not own any networks. */
- p->thread.hardwall = NULL;
+ memset(&p->thread.hardwall[0], 0,
+ sizeof(struct hardwall_task) * HARDWALL_TYPES);
#endif
@@ -515,12 +516,7 @@
#ifdef CONFIG_HARDWALL
/* Enable or disable access to the network registers appropriately. */
- if (prev->thread.hardwall != NULL) {
- if (next->thread.hardwall == NULL)
- restrict_network_mpls();
- } else if (next->thread.hardwall != NULL) {
- grant_network_mpls();
- }
+ hardwall_switch_tasks(prev, next);
#endif
/*
diff --git a/arch/tile/kernel/relocate_kernel.S b/arch/tile/kernel/relocate_kernel_32.S
similarity index 100%
rename from arch/tile/kernel/relocate_kernel.S
rename to arch/tile/kernel/relocate_kernel_32.S
diff --git a/arch/tile/kernel/relocate_kernel_64.S b/arch/tile/kernel/relocate_kernel_64.S
new file mode 100644
index 0000000..1c09a4f
--- /dev/null
+++ b/arch/tile/kernel/relocate_kernel_64.S
@@ -0,0 +1,260 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * copy new kernel into place and then call hv_reexec
+ *
+ */
+
+#include <linux/linkage.h>
+#include <arch/chip.h>
+#include <asm/page.h>
+#include <hv/hypervisor.h>
+
+#undef RELOCATE_NEW_KERNEL_VERBOSE
+
+STD_ENTRY(relocate_new_kernel)
+
+ move r30, r0 /* page list */
+ move r31, r1 /* address of page we are on */
+ move r32, r2 /* start address of new kernel */
+
+ shrui r1, r1, PAGE_SHIFT
+ addi r1, r1, 1
+ shli sp, r1, PAGE_SHIFT
+ addi sp, sp, -8
+ /* we now have a stack (whether we need one or not) */
+
+ moveli r40, hw2_last(hv_console_putc)
+ shl16insli r40, r40, hw1(hv_console_putc)
+ shl16insli r40, r40, hw0(hv_console_putc)
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'r'
+ jalr r40
+
+ moveli r0, '_'
+ jalr r40
+
+ moveli r0, 'n'
+ jalr r40
+
+ moveli r0, '_'
+ jalr r40
+
+ moveli r0, 'k'
+ jalr r40
+
+ moveli r0, '\n'
+ jalr r40
+#endif
+
+ /*
+ * Throughout this code r30 is pointer to the element of page
+ * list we are working on.
+ *
+ * Normally we get to the next element of the page list by
+ * incrementing r30 by eight. The exception is if the element
+ * on the page list is an IND_INDIRECTION in which case we use
+ * the element with the low bits masked off as the new value
+ * of r30.
+ *
+ * To get this started, we need the value passed to us (which
+ * will always be an IND_INDIRECTION) in memory somewhere with
+ * r30 pointing at it. To do that, we push the value passed
+ * to us on the stack and make r30 point to it.
+ */
+
+ st sp, r30
+ move r30, sp
+ addi sp, sp, -16
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ /*
+ * On TILE-GX, we need to flush all tiles' caches, since we may
+ * have been doing hash-for-home caching there. Note that we
+ * must do this _after_ we're completely done modifying any memory
+ * other than our output buffer (which we know is locally cached).
+ * We want the caches to be fully clean when we do the reexec,
+ * because the hypervisor is going to do this flush again at that
+ * point, and we don't want that second flush to overwrite any memory.
+ */
+ {
+ move r0, zero /* cache_pa */
+ moveli r1, hw2_last(HV_FLUSH_EVICT_L2)
+ }
+ {
+ shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2)
+ movei r2, -1 /* cache_cpumask; -1 means all client tiles */
+ }
+ {
+ shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) /* cache_control */
+ move r3, zero /* tlb_va */
+ }
+ {
+ move r4, zero /* tlb_length */
+ move r5, zero /* tlb_pgsize */
+ }
+ {
+ move r6, zero /* tlb_cpumask */
+ move r7, zero /* asids */
+ }
+ {
+ moveli r20, hw2_last(hv_flush_remote)
+ move r8, zero /* asidcount */
+ }
+ shl16insli r20, r20, hw1(hv_flush_remote)
+ shl16insli r20, r20, hw0(hv_flush_remote)
+
+ jalr r20
+#endif
+
+ /* r33 is destination pointer, default to zero */
+
+ moveli r33, 0
+
+.Lloop: ld r10, r30
+
+ andi r9, r10, 0xf /* low 4 bits tell us what type it is */
+ xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */
+
+ cmpeqi r0, r9, 0x1 /* IND_DESTINATION */
+ beqzt r0, .Ltry2
+
+ move r33, r10
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'd'
+ jalr r40
+#endif
+
+ addi r30, r30, 8
+ j .Lloop
+
+.Ltry2:
+ cmpeqi r0, r9, 0x2 /* IND_INDIRECTION */
+ beqzt r0, .Ltry4
+
+ move r30, r10
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'i'
+ jalr r40
+#endif
+
+ j .Lloop
+
+.Ltry4:
+ cmpeqi r0, r9, 0x4 /* IND_DONE */
+ beqzt r0, .Ltry8
+
+ mf
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'D'
+ jalr r40
+ moveli r0, '\n'
+ jalr r40
+#endif
+
+ move r0, r32
+
+ moveli r41, hw2_last(hv_reexec)
+ shl16insli r41, r41, hw1(hv_reexec)
+ shl16insli r41, r41, hw0(hv_reexec)
+
+ jalr r41
+
+ /* we should not get here */
+
+ moveli r0, '?'
+ jalr r40
+ moveli r0, '\n'
+ jalr r40
+
+ j .Lhalt
+
+.Ltry8: cmpeqi r0, r9, 0x8 /* IND_SOURCE */
+ beqz r0, .Lerr /* unknown type */
+
+ /* copy page at r10 to page at r33 */
+
+ move r11, r33
+
+ moveli r0, hw2_last(PAGE_SIZE)
+ shl16insli r0, r0, hw1(PAGE_SIZE)
+ shl16insli r0, r0, hw0(PAGE_SIZE)
+ add r33, r33, r0
+
+ /* copy word at r10 to word at r11 until r11 equals r33 */
+
+ /* We know page size must be multiple of 8, so we can unroll
+ * 8 times safely without any edge case checking.
+ *
+ * Issue a flush of the destination every 8 words to avoid
+ * incoherence when starting the new kernel. (Now this is
+ * just good paranoia because the hv_reexec call will also
+ * take care of this.)
+ */
+
+1:
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0; addi r11, r11, 8 }
+ { ld r0, r10; addi r10, r10, 8 }
+ { st r11, r0 }
+ { flush r11 ; addi r11, r11, 8 }
+
+ cmpeq r0, r33, r11
+ beqzt r0, 1b
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 's'
+ jalr r40
+#endif
+
+ addi r30, r30, 8
+ j .Lloop
+
+
+.Lerr: moveli r0, 'e'
+ jalr r40
+ moveli r0, 'r'
+ jalr r40
+ moveli r0, 'r'
+ jalr r40
+ moveli r0, '\n'
+ jalr r40
+.Lhalt:
+ moveli r41, hw2_last(hv_halt)
+ shl16insli r41, r41, hw1(hv_halt)
+ shl16insli r41, r41, hw0(hv_halt)
+
+ jalr r41
+ STD_ENDPROC(relocate_new_kernel)
+
+ .section .rodata,"a"
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long .Lend_relocate_new_kernel - relocate_new_kernel
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index 98d80eb..6098ccc 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -28,6 +28,7 @@
#include <linux/highmem.h>
#include <linux/smp.h>
#include <linux/timex.h>
+#include <linux/hugetlb.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>
@@ -49,9 +50,6 @@
struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
-/* We only create bootmem data on node 0. */
-static bootmem_data_t __initdata node0_bdata;
-
/* Information on the NUMA nodes that we compute early */
unsigned long __cpuinitdata node_start_pfn[MAX_NUMNODES];
unsigned long __cpuinitdata node_end_pfn[MAX_NUMNODES];
@@ -534,37 +532,96 @@
#endif
}
-static void __init setup_bootmem_allocator(void)
+/*
+ * On 32-bit machines, we only put bootmem on the low controller,
+ * since PAs > 4GB can't be used in bootmem. In principle one could
+ * imagine, e.g., multiple 1 GB controllers all of which could support
+ * bootmem, but in practice using controllers this small isn't a
+ * particularly interesting scenario, so we just keep it simple and
+ * use only the first controller for bootmem on 32-bit machines.
+ */
+static inline int node_has_bootmem(int nid)
{
- unsigned long bootmap_size, first_alloc_pfn, last_alloc_pfn;
-
- /* Provide a node 0 bdata. */
- NODE_DATA(0)->bdata = &node0_bdata;
-
-#ifdef CONFIG_PCI
- /* Don't let boot memory alias the PCI region. */
- last_alloc_pfn = min(max_low_pfn, pci_reserve_start_pfn);
+#ifdef CONFIG_64BIT
+ return 1;
#else
- last_alloc_pfn = max_low_pfn;
+ return nid == 0;
+#endif
+}
+
+static inline unsigned long alloc_bootmem_pfn(int nid,
+ unsigned long size,
+ unsigned long goal)
+{
+ void *kva = __alloc_bootmem_node(NODE_DATA(nid), size,
+ PAGE_SIZE, goal);
+ unsigned long pfn = kaddr_to_pfn(kva);
+ BUG_ON(goal && PFN_PHYS(pfn) != goal);
+ return pfn;
+}
+
+static void __init setup_bootmem_allocator_node(int i)
+{
+ unsigned long start, end, mapsize, mapstart;
+
+ if (node_has_bootmem(i)) {
+ NODE_DATA(i)->bdata = &bootmem_node_data[i];
+ } else {
+ /* Share controller zero's bdata for now. */
+ NODE_DATA(i)->bdata = &bootmem_node_data[0];
+ return;
+ }
+
+ /* Skip up to after the bss in node 0. */
+ start = (i == 0) ? min_low_pfn : node_start_pfn[i];
+
+ /* Only lowmem, if we're a HIGHMEM build. */
+#ifdef CONFIG_HIGHMEM
+ end = node_lowmem_end_pfn[i];
+#else
+ end = node_end_pfn[i];
#endif
- /*
- * Initialize the boot-time allocator (with low memory only):
- * The first argument says where to put the bitmap, and the
- * second says where the end of allocatable memory is.
- */
- bootmap_size = init_bootmem(min_low_pfn, last_alloc_pfn);
+ /* No memory here. */
+ if (end == start)
+ return;
- /*
- * Let the bootmem allocator use all the space we've given it
- * except for its own bitmap.
- */
- first_alloc_pfn = min_low_pfn + PFN_UP(bootmap_size);
- if (first_alloc_pfn >= last_alloc_pfn)
- early_panic("Not enough memory on controller 0 for bootmem\n");
+ /* Figure out where the bootmem bitmap is located. */
+ mapsize = bootmem_bootmap_pages(end - start);
+ if (i == 0) {
+ /* Use some space right before the heap on node 0. */
+ mapstart = start;
+ start += mapsize;
+ } else {
+ /* Allocate bitmap on node 0 to avoid page table issues. */
+ mapstart = alloc_bootmem_pfn(0, PFN_PHYS(mapsize), 0);
+ }
- free_bootmem(PFN_PHYS(first_alloc_pfn),
- PFN_PHYS(last_alloc_pfn - first_alloc_pfn));
+ /* Initialize a node. */
+ init_bootmem_node(NODE_DATA(i), mapstart, start, end);
+
+ /* Free all the space back into the allocator. */
+ free_bootmem(PFN_PHYS(start), PFN_PHYS(end - start));
+
+#if defined(CONFIG_PCI)
+ /*
+ * Throw away any memory aliased by the PCI region. FIXME: this
+ * is a temporary hack to work around bug 10502, and needs to be
+ * fixed properly.
+ */
+ if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start)
+ reserve_bootmem(PFN_PHYS(pci_reserve_start_pfn),
+ PFN_PHYS(pci_reserve_end_pfn -
+ pci_reserve_start_pfn),
+ BOOTMEM_EXCLUSIVE);
+#endif
+}
+
+static void __init setup_bootmem_allocator(void)
+{
+ int i;
+ for (i = 0; i < MAX_NUMNODES; ++i)
+ setup_bootmem_allocator_node(i);
#ifdef CONFIG_KEXEC
if (crashk_res.start != crashk_res.end)
@@ -595,14 +652,6 @@
return size;
}
-static inline unsigned long alloc_bootmem_pfn(int size, unsigned long goal)
-{
- void *kva = __alloc_bootmem(size, PAGE_SIZE, goal);
- unsigned long pfn = kaddr_to_pfn(kva);
- BUG_ON(goal && PFN_PHYS(pfn) != goal);
- return pfn;
-}
-
static void __init zone_sizes_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = { 0 };
@@ -640,21 +689,22 @@
* though, there'll be no lowmem, so we just alloc_bootmem
* the memmap. There will be no percpu memory either.
*/
- if (__pfn_to_highbits(start) == 0) {
- /* In low PAs, allocate via bootmem. */
+ if (i != 0 && cpu_isset(i, isolnodes)) {
+ node_memmap_pfn[i] =
+ alloc_bootmem_pfn(0, memmap_size, 0);
+ BUG_ON(node_percpu[i] != 0);
+ } else if (node_has_bootmem(start)) {
unsigned long goal = 0;
node_memmap_pfn[i] =
- alloc_bootmem_pfn(memmap_size, goal);
+ alloc_bootmem_pfn(i, memmap_size, 0);
if (kdata_huge)
goal = PFN_PHYS(lowmem_end) - node_percpu[i];
if (node_percpu[i])
node_percpu_pfn[i] =
- alloc_bootmem_pfn(node_percpu[i], goal);
- } else if (cpu_isset(i, isolnodes)) {
- node_memmap_pfn[i] = alloc_bootmem_pfn(memmap_size, 0);
- BUG_ON(node_percpu[i] != 0);
+ alloc_bootmem_pfn(i, node_percpu[i],
+ goal);
} else {
- /* In high PAs, just reserve some pages. */
+ /* In non-bootmem zones, just reserve some pages. */
node_memmap_pfn[i] = node_free_pfn[i];
node_free_pfn[i] += PFN_UP(memmap_size);
if (!kdata_huge) {
@@ -678,16 +728,9 @@
zones_size[ZONE_NORMAL] = end - start;
#endif
- /*
- * Everyone shares node 0's bootmem allocator, but
- * we use alloc_remap(), above, to put the actual
- * struct page array on the individual controllers,
- * which is most of the data that we actually care about.
- * We can't place bootmem allocators on the other
- * controllers since the bootmem allocator can only
- * operate on 32-bit physical addresses.
- */
- NODE_DATA(i)->bdata = NODE_DATA(0)->bdata;
+ /* Take zone metadata from controller 0 if we're isolnode. */
+ if (node_isset(i, isolnodes))
+ NODE_DATA(i)->bdata = &bootmem_node_data[0];
free_area_init_node(i, zones_size, start, NULL);
printk(KERN_DEBUG " Normal zone: %ld per-cpu pages\n",
@@ -870,6 +913,22 @@
#endif /* CONFIG_NUMA */
+/*
+ * Initialize hugepage support on this cpu. We do this on all cores
+ * early in boot: before argument parsing for the boot cpu, and after
+ * argument parsing but before the init functions run on the secondaries.
+ * So the values we set up here in the hypervisor may be overridden on
+ * the boot cpu as arguments are parsed.
+ */
+static __cpuinit void init_super_pages(void)
+{
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+ int i;
+ for (i = 0; i < HUGE_SHIFT_ENTRIES; ++i)
+ hv_set_pte_super_shift(i, huge_shift[i]);
+#endif
+}
+
/**
* setup_cpu() - Do all necessary per-cpu, tile-specific initialization.
* @boot: Is this the boot cpu?
@@ -924,6 +983,8 @@
/* Reset the network state on this cpu. */
reset_network_state();
#endif
+
+ init_super_pages();
}
#ifdef CONFIG_BLK_DEV_INITRD
@@ -1412,13 +1473,13 @@
for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) {
/* Update the vmalloc mapping and page home. */
- pte_t *ptep =
- virt_to_pte(NULL, (unsigned long)ptr + i);
+ unsigned long addr = (unsigned long)ptr + i;
+ pte_t *ptep = virt_to_pte(NULL, addr);
pte_t pte = *ptep;
BUG_ON(pfn != pte_pfn(pte));
pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
pte = set_remote_cache_cpu(pte, cpu);
- set_pte(ptep, pte);
+ set_pte_at(&init_mm, addr, ptep, pte);
/* Update the lowmem mapping for consistency. */
lowmem_va = (unsigned long)pfn_to_kaddr(pfn);
@@ -1431,7 +1492,7 @@
BUG_ON(pte_huge(*ptep));
}
BUG_ON(pfn != pte_pfn(*ptep));
- set_pte(ptep, pte);
+ set_pte_at(&init_mm, lowmem_va, ptep, pte);
}
}
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 89529c9..27742e8 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -172,9 +172,6 @@
return (tilepro_bundle_bits) 0;
}
-#ifndef __LITTLE_ENDIAN
-# error We assume little-endian representation with copy_xx_user size 2 here
-#endif
/* Handle unaligned load/store */
if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
unsigned short val_16;
@@ -195,8 +192,19 @@
state->update = 1;
}
} else {
+ unsigned short val_16;
val = (val_reg == TREG_ZERO) ? 0 : regs->regs[val_reg];
- err = copy_to_user(addr, &val, size);
+ switch (size) {
+ case 2:
+ val_16 = val;
+ err = copy_to_user(addr, &val_16, sizeof(val_16));
+ break;
+ case 4:
+ err = copy_to_user(addr, &val, sizeof(val));
+ break;
+ default:
+ BUG();
+ }
}
if (err) {
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 91da0f7..cbc73a8 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -203,7 +203,7 @@
if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0)
panic("Failed to initialize IPI for cpu %d\n", cpu);
- offset = hv_pte_get_pfn(pte) << PAGE_SHIFT;
+ offset = PFN_PHYS(pte_pfn(pte));
ipi_mappings[cpu] = ioremap_prot(offset, PAGE_SIZE, pte);
}
#endif
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
index cb44ba7..b08095b 100644
--- a/arch/tile/kernel/sys.c
+++ b/arch/tile/kernel/sys.c
@@ -32,11 +32,17 @@
#include <asm/syscalls.h>
#include <asm/pgtable.h>
#include <asm/homecache.h>
+#include <asm/cachectl.h>
#include <arch/chip.h>
-SYSCALL_DEFINE0(flush_cache)
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len,
+ unsigned long, flags)
{
- homecache_evict(cpumask_of(smp_processor_id()));
+ if (flags & DCACHE)
+ homecache_evict(cpumask_of(smp_processor_id()));
+ if (flags & ICACHE)
+ flush_remote(0, HV_FLUSH_EVICT_L1I, mm_cpumask(current->mm),
+ 0, 0, 0, NULL, NULL, 0);
return 0;
}
diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c
index 71ae728..e25b0a8 100644
--- a/arch/tile/kernel/sysfs.c
+++ b/arch/tile/kernel/sysfs.c
@@ -93,6 +93,10 @@
HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM)
HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV)
HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC)
+HV_CONF_ATTR(cpumod_part, HV_CONFSTR_CPUMOD_PART_NUM)
+HV_CONF_ATTR(cpumod_serial, HV_CONFSTR_CPUMOD_SERIAL_NUM)
+HV_CONF_ATTR(cpumod_revision, HV_CONFSTR_CPUMOD_REV)
+HV_CONF_ATTR(cpumod_description,HV_CONFSTR_CPUMOD_DESC)
HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL)
static struct attribute *board_attrs[] = {
@@ -104,6 +108,10 @@
&dev_attr_mezz_serial.attr,
&dev_attr_mezz_revision.attr,
&dev_attr_mezz_description.attr,
+ &dev_attr_cpumod_part.attr,
+ &dev_attr_cpumod_serial.attr,
+ &dev_attr_cpumod_revision.attr,
+ &dev_attr_cpumod_description.attr,
&dev_attr_switch_control.attr,
NULL
};
diff --git a/arch/tile/kernel/tlb.c b/arch/tile/kernel/tlb.c
index a5f241c..3fd54d5 100644
--- a/arch/tile/kernel/tlb.c
+++ b/arch/tile/kernel/tlb.c
@@ -15,6 +15,7 @@
#include <linux/cpumask.h>
#include <linux/module.h>
+#include <linux/hugetlb.h>
#include <asm/tlbflush.h>
#include <asm/homecache.h>
#include <hv/hypervisor.h>
@@ -49,25 +50,25 @@
flush_tlb_mm(current->mm);
}
-void flush_tlb_page_mm(const struct vm_area_struct *vma, struct mm_struct *mm,
+void flush_tlb_page_mm(struct vm_area_struct *vma, struct mm_struct *mm,
unsigned long va)
{
- unsigned long size = hv_page_size(vma);
+ unsigned long size = vma_kernel_pagesize(vma);
int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
flush_remote(0, cache, mm_cpumask(mm),
va, size, size, mm_cpumask(mm), NULL, 0);
}
-void flush_tlb_page(const struct vm_area_struct *vma, unsigned long va)
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
{
flush_tlb_page_mm(vma, vma->vm_mm, va);
}
EXPORT_SYMBOL(flush_tlb_page);
-void flush_tlb_range(const struct vm_area_struct *vma,
+void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- unsigned long size = hv_page_size(vma);
+ unsigned long size = vma_kernel_pagesize(vma);
struct mm_struct *mm = vma->vm_mm;
int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
flush_remote(0, cache, mm_cpumask(mm), start, end - start, size,
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 73cff81..5b19a23 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -195,6 +195,25 @@
return 1;
}
+static const char *const int_name[] = {
+ [INT_MEM_ERROR] = "Memory error",
+ [INT_ILL] = "Illegal instruction",
+ [INT_GPV] = "General protection violation",
+ [INT_UDN_ACCESS] = "UDN access",
+ [INT_IDN_ACCESS] = "IDN access",
+#if CHIP_HAS_SN()
+ [INT_SN_ACCESS] = "SN access",
+#endif
+ [INT_SWINT_3] = "Software interrupt 3",
+ [INT_SWINT_2] = "Software interrupt 2",
+ [INT_SWINT_0] = "Software interrupt 0",
+ [INT_UNALIGN_DATA] = "Unaligned data",
+ [INT_DOUBLE_FAULT] = "Double fault",
+#ifdef __tilegx__
+ [INT_ILL_TRANS] = "Illegal virtual address",
+#endif
+};
+
void __kprobes do_trap(struct pt_regs *regs, int fault_num,
unsigned long reason)
{
@@ -211,10 +230,17 @@
* current process and hope for the best.
*/
if (!user_mode(regs)) {
+ const char *name;
if (fixup_exception(regs)) /* only UNALIGN_DATA in practice */
return;
- pr_alert("Kernel took bad trap %d at PC %#lx\n",
- fault_num, regs->pc);
+ if (fault_num >= 0 &&
+ fault_num < sizeof(int_name)/sizeof(int_name[0]) &&
+ int_name[fault_num] != NULL)
+ name = int_name[fault_num];
+ else
+ name = "Unknown interrupt";
+ pr_alert("Kernel took bad trap %d (%s) at PC %#lx\n",
+ fault_num, name, regs->pc);
if (fault_num == INT_GPV)
pr_alert("GPV_REASON is %#lx\n", reason);
show_regs(regs);
diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c
index 771b251..f5cada7 100644
--- a/arch/tile/lib/atomic_32.c
+++ b/arch/tile/lib/atomic_32.c
@@ -18,7 +18,6 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/atomic.h>
-#include <asm/futex.h>
#include <arch/chip.h>
/* See <asm/atomic_32.h> */
@@ -50,7 +49,7 @@
#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-static inline int *__atomic_hashed_lock(volatile void *v)
+int *__atomic_hashed_lock(volatile void *v)
{
/* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */
#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
@@ -191,47 +190,6 @@
EXPORT_SYMBOL(_atomic64_cmpxchg);
-static inline int *__futex_setup(int __user *v)
-{
- /*
- * Issue a prefetch to the counter to bring it into cache.
- * As for __atomic_setup, but we can't do a read into the L1
- * since it might fault; instead we do a prefetch into the L2.
- */
- __insn_prefetch(v);
- return __atomic_hashed_lock((int __force *)v);
-}
-
-struct __get_user futex_set(u32 __user *v, int i)
-{
- return __atomic_xchg((int __force *)v, __futex_setup(v), i);
-}
-
-struct __get_user futex_add(u32 __user *v, int n)
-{
- return __atomic_xchg_add((int __force *)v, __futex_setup(v), n);
-}
-
-struct __get_user futex_or(u32 __user *v, int n)
-{
- return __atomic_or((int __force *)v, __futex_setup(v), n);
-}
-
-struct __get_user futex_andn(u32 __user *v, int n)
-{
- return __atomic_andn((int __force *)v, __futex_setup(v), n);
-}
-
-struct __get_user futex_xor(u32 __user *v, int n)
-{
- return __atomic_xor((int __force *)v, __futex_setup(v), n);
-}
-
-struct __get_user futex_cmpxchg(u32 __user *v, int o, int n)
-{
- return __atomic_cmpxchg((int __force *)v, __futex_setup(v), o, n);
-}
-
/*
* If any of the atomic or futex routines hit a bad address (not in
* the page tables at kernel PL) this routine is called. The futex
@@ -323,7 +281,4 @@
BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
- /* The futex code makes this assumption, so we validate it here. */
- BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int));
}
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
index 2a81d32..dd5f0a3 100644
--- a/arch/tile/lib/exports.c
+++ b/arch/tile/lib/exports.c
@@ -18,14 +18,6 @@
/* arch/tile/lib/usercopy.S */
#include <linux/uaccess.h>
-EXPORT_SYMBOL(__get_user_1);
-EXPORT_SYMBOL(__get_user_2);
-EXPORT_SYMBOL(__get_user_4);
-EXPORT_SYMBOL(__get_user_8);
-EXPORT_SYMBOL(__put_user_1);
-EXPORT_SYMBOL(__put_user_2);
-EXPORT_SYMBOL(__put_user_4);
-EXPORT_SYMBOL(__put_user_8);
EXPORT_SYMBOL(strnlen_user_asm);
EXPORT_SYMBOL(strncpy_from_user_asm);
EXPORT_SYMBOL(clear_user_asm);
diff --git a/arch/tile/lib/memchr_64.c b/arch/tile/lib/memchr_64.c
index 84fdc8d..6f867db 100644
--- a/arch/tile/lib/memchr_64.c
+++ b/arch/tile/lib/memchr_64.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
+#include "string-endian.h"
void *memchr(const void *s, int c, size_t n)
{
@@ -39,11 +40,8 @@
/* Read the first word, but munge it so that bytes before the array
* will not match goal.
- *
- * Note that this shift count expression works because we know
- * shift counts are taken mod 64.
*/
- before_mask = (1ULL << (s_int << 3)) - 1;
+ before_mask = MASK(s_int);
v = (*p | before_mask) ^ (goal & before_mask);
/* Compute the address of the last byte. */
@@ -65,7 +63,7 @@
/* We found a match, but it might be in a byte past the end
* of the array.
*/
- ret = ((char *)p) + (__insn_ctz(bits) >> 3);
+ ret = ((char *)p) + (CFZ(bits) >> 3);
return (ret <= last_byte_ptr) ? ret : NULL;
}
EXPORT_SYMBOL(memchr);
diff --git a/arch/tile/lib/memcpy_64.c b/arch/tile/lib/memcpy_64.c
index 3fab9a6..c79b8e7 100644
--- a/arch/tile/lib/memcpy_64.c
+++ b/arch/tile/lib/memcpy_64.c
@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
-#define __memcpy memcpy
/* EXPORT_SYMBOL() is in arch/tile/lib/exports.c since this should be asm. */
/* Must be 8 bytes in size. */
@@ -188,6 +187,7 @@
/* n != 0 if we get here. Write out any trailing bytes. */
dst1 = (char *)dst8;
+#ifndef __BIG_ENDIAN__
if (n & 4) {
ST4((uint32_t *)dst1, final);
dst1 += 4;
@@ -202,11 +202,30 @@
}
if (n)
ST1((uint8_t *)dst1, final);
+#else
+ if (n & 4) {
+ ST4((uint32_t *)dst1, final >> 32);
+ dst1 += 4;
+ }
+ else
+ {
+ final >>= 32;
+ }
+ if (n & 2) {
+ ST2((uint16_t *)dst1, final >> 16);
+ dst1 += 2;
+ }
+ else
+ {
+ final >>= 16;
+ }
+ if (n & 1)
+ ST1((uint8_t *)dst1, final >> 8);
+#endif
return RETVAL;
}
-
#ifdef USERCOPY_FUNC
#undef ST1
#undef ST2
diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c
index b2fe15e..3bc4b4e 100644
--- a/arch/tile/lib/memcpy_tile64.c
+++ b/arch/tile/lib/memcpy_tile64.c
@@ -160,7 +160,7 @@
break;
if (get_remote_cache_cpu(src_pte) == smp_processor_id())
break;
- src_page = pfn_to_page(hv_pte_get_pfn(src_pte));
+ src_page = pfn_to_page(pte_pfn(src_pte));
get_page(src_page);
if (pte_val(src_pte) != pte_val(*src_ptep)) {
put_page(src_page);
@@ -168,7 +168,7 @@
}
if (pte_huge(src_pte)) {
/* Adjust the PTE to correspond to a small page */
- int pfn = hv_pte_get_pfn(src_pte);
+ int pfn = pte_pfn(src_pte);
pfn += (((unsigned long)source & (HPAGE_SIZE-1))
>> PAGE_SHIFT);
src_pte = pfn_pte(pfn, src_pte);
@@ -188,7 +188,7 @@
put_page(src_page);
break;
}
- dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte));
+ dst_page = pfn_to_page(pte_pfn(dst_pte));
if (dst_page == src_page) {
/*
* Source and dest are on the same page; this
@@ -206,7 +206,7 @@
}
if (pte_huge(dst_pte)) {
/* Adjust the PTE to correspond to a small page */
- int pfn = hv_pte_get_pfn(dst_pte);
+ int pfn = pte_pfn(dst_pte);
pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
>> PAGE_SHIFT);
dst_pte = pfn_pte(pfn, dst_pte);
diff --git a/arch/tile/lib/strchr_64.c b/arch/tile/lib/strchr_64.c
index 617a927..f39f9dc42 100644
--- a/arch/tile/lib/strchr_64.c
+++ b/arch/tile/lib/strchr_64.c
@@ -15,8 +15,7 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
-
-#undef strchr
+#include "string-endian.h"
char *strchr(const char *s, int c)
{
@@ -33,13 +32,9 @@
* match neither zero nor goal (we make sure the high bit of each
* byte is 1, and the low 7 bits are all the opposite of the goal
* byte).
- *
- * Note that this shift count expression works because we know shift
- * counts are taken mod 64.
*/
- const uint64_t before_mask = (1ULL << (s_int << 3)) - 1;
- uint64_t v = (*p | before_mask) ^
- (goal & __insn_v1shrsi(before_mask, 1));
+ const uint64_t before_mask = MASK(s_int);
+ uint64_t v = (*p | before_mask) ^ (goal & __insn_v1shrui(before_mask, 1));
uint64_t zero_matches, goal_matches;
while (1) {
@@ -55,8 +50,8 @@
v = *++p;
}
- z = __insn_ctz(zero_matches);
- g = __insn_ctz(goal_matches);
+ z = CFZ(zero_matches);
+ g = CFZ(goal_matches);
/* If we found c before '\0' we got a match. Note that if c == '\0'
* then g == z, and we correctly return the address of the '\0'
diff --git a/arch/tile/lib/string-endian.h b/arch/tile/lib/string-endian.h
new file mode 100644
index 0000000..c0eed7c
--- /dev/null
+++ b/arch/tile/lib/string-endian.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Provide a mask based on the pointer alignment that
+ * sets up non-zero bytes before the beginning of the string.
+ * The MASK expression works because shift counts are taken mod 64.
+ * Also, specify how to count "first" and "last" bits
+ * when the bits have been read as a word.
+ */
+
+#include <asm/byteorder.h>
+
+#ifdef __LITTLE_ENDIAN
+#define MASK(x) (__insn_shl(1ULL, (x << 3)) - 1)
+#define NULMASK(x) ((2ULL << x) - 1)
+#define CFZ(x) __insn_ctz(x)
+#define REVCZ(x) __insn_clz(x)
+#else
+#define MASK(x) (__insn_shl(-2LL, ((-x << 3) - 1)))
+#define NULMASK(x) (-2LL << (63 - x))
+#define CFZ(x) __insn_clz(x)
+#define REVCZ(x) __insn_ctz(x)
+#endif
diff --git a/arch/tile/lib/strlen_64.c b/arch/tile/lib/strlen_64.c
index 1c92d46..9583fc3 100644
--- a/arch/tile/lib/strlen_64.c
+++ b/arch/tile/lib/strlen_64.c
@@ -15,8 +15,7 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
-
-#undef strlen
+#include "string-endian.h"
size_t strlen(const char *s)
{
@@ -24,15 +23,13 @@
const uintptr_t s_int = (uintptr_t) s;
const uint64_t *p = (const uint64_t *)(s_int & -8);
- /* Read the first word, but force bytes before the string to be nonzero.
- * This expression works because we know shift counts are taken mod 64.
- */
- uint64_t v = *p | ((1ULL << (s_int << 3)) - 1);
+ /* Read and MASK the first word. */
+ uint64_t v = *p | MASK(s_int);
uint64_t bits;
while ((bits = __insn_v1cmpeqi(v, 0)) == 0)
v = *++p;
- return ((const char *)p) + (__insn_ctz(bits) >> 3) - s;
+ return ((const char *)p) + (CFZ(bits) >> 3) - s;
}
EXPORT_SYMBOL(strlen);
diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S
index 979f76d..b62d002 100644
--- a/arch/tile/lib/usercopy_32.S
+++ b/arch/tile/lib/usercopy_32.S
@@ -19,82 +19,6 @@
/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
- .pushsection .fixup,"ax"
-
-get_user_fault:
- { move r0, zero; move r1, zero }
- { movei r2, -EFAULT; jrp lr }
- ENDPROC(get_user_fault)
-
-put_user_fault:
- { movei r0, -EFAULT; jrp lr }
- ENDPROC(put_user_fault)
-
- .popsection
-
-/*
- * __get_user_N functions take a pointer in r0, and return 0 in r2
- * on success, with the value in r0; or else -EFAULT in r2.
- */
-#define __get_user_N(bytes, LOAD) \
- STD_ENTRY(__get_user_##bytes); \
-1: { LOAD r0, r0; move r1, zero; move r2, zero }; \
- jrp lr; \
- STD_ENDPROC(__get_user_##bytes); \
- .pushsection __ex_table,"a"; \
- .word 1b, get_user_fault; \
- .popsection
-
-__get_user_N(1, lb_u)
-__get_user_N(2, lh_u)
-__get_user_N(4, lw)
-
-/*
- * __get_user_8 takes a pointer in r0, and returns 0 in r2
- * on success, with the value in r0/r1; or else -EFAULT in r2.
- */
- STD_ENTRY(__get_user_8);
-1: { lw r0, r0; addi r1, r0, 4 };
-2: { lw r1, r1; move r2, zero };
- jrp lr;
- STD_ENDPROC(__get_user_8);
- .pushsection __ex_table,"a";
- .word 1b, get_user_fault;
- .word 2b, get_user_fault;
- .popsection
-
-/*
- * __put_user_N functions take a value in r0 and a pointer in r1,
- * and return 0 in r0 on success or -EFAULT on failure.
- */
-#define __put_user_N(bytes, STORE) \
- STD_ENTRY(__put_user_##bytes); \
-1: { STORE r1, r0; move r0, zero }; \
- jrp lr; \
- STD_ENDPROC(__put_user_##bytes); \
- .pushsection __ex_table,"a"; \
- .word 1b, put_user_fault; \
- .popsection
-
-__put_user_N(1, sb)
-__put_user_N(2, sh)
-__put_user_N(4, sw)
-
-/*
- * __put_user_8 takes a value in r0/r1 and a pointer in r2,
- * and returns 0 in r0 on success or -EFAULT on failure.
- */
-STD_ENTRY(__put_user_8)
-1: { sw r2, r0; addi r2, r2, 4 }
-2: { sw r2, r1; move r0, zero }
- jrp lr
- STD_ENDPROC(__put_user_8)
- .pushsection __ex_table,"a"
- .word 1b, put_user_fault
- .word 2b, put_user_fault
- .popsection
-
-
/*
* strnlen_user_asm takes the pointer in r0, and the length bound in r1.
* It returns the length, including the terminating NUL, or zero on exception.
diff --git a/arch/tile/lib/usercopy_64.S b/arch/tile/lib/usercopy_64.S
index 2ff44f8..adb2dbb 100644
--- a/arch/tile/lib/usercopy_64.S
+++ b/arch/tile/lib/usercopy_64.S
@@ -19,55 +19,6 @@
/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
- .pushsection .fixup,"ax"
-
-get_user_fault:
- { movei r1, -EFAULT; move r0, zero }
- jrp lr
- ENDPROC(get_user_fault)
-
-put_user_fault:
- { movei r0, -EFAULT; jrp lr }
- ENDPROC(put_user_fault)
-
- .popsection
-
-/*
- * __get_user_N functions take a pointer in r0, and return 0 in r1
- * on success, with the value in r0; or else -EFAULT in r1.
- */
-#define __get_user_N(bytes, LOAD) \
- STD_ENTRY(__get_user_##bytes); \
-1: { LOAD r0, r0; move r1, zero }; \
- jrp lr; \
- STD_ENDPROC(__get_user_##bytes); \
- .pushsection __ex_table,"a"; \
- .quad 1b, get_user_fault; \
- .popsection
-
-__get_user_N(1, ld1u)
-__get_user_N(2, ld2u)
-__get_user_N(4, ld4u)
-__get_user_N(8, ld)
-
-/*
- * __put_user_N functions take a value in r0 and a pointer in r1,
- * and return 0 in r0 on success or -EFAULT on failure.
- */
-#define __put_user_N(bytes, STORE) \
- STD_ENTRY(__put_user_##bytes); \
-1: { STORE r1, r0; move r0, zero }; \
- jrp lr; \
- STD_ENDPROC(__put_user_##bytes); \
- .pushsection __ex_table,"a"; \
- .quad 1b, put_user_fault; \
- .popsection
-
-__put_user_N(1, st1)
-__put_user_N(2, st2)
-__put_user_N(4, st4)
-__put_user_N(8, st)
-
/*
* strnlen_user_asm takes the pointer in r0, and the length bound in r1.
* It returns the length, including the terminating NUL, or zero on exception.
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 22e58f5..84ce7ab 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -187,7 +187,7 @@
HV_Context ctx = hv_inquire_context();
unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT;
struct page *pgd_page = pfn_to_page(pgd_pfn);
- BUG_ON(PageHighMem(pgd_page)); /* oops, HIGHPTE? */
+ BUG_ON(PageHighMem(pgd_page));
return (pgd_t *) __va(ctx.page_table);
}
@@ -273,11 +273,15 @@
int si_code;
int is_kernel_mode;
pgd_t *pgd;
+ unsigned int flags;
/* on TILE, protection faults are always writes */
if (!is_page_fault)
write = 1;
+ flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ (write ? FAULT_FLAG_WRITE : 0));
+
is_kernel_mode = (EX1_PL(regs->ex1) != USER_PL);
tsk = validate_current();
@@ -382,6 +386,8 @@
vma = NULL; /* happy compiler */
goto bad_area_nosemaphore;
}
+
+retry:
down_read(&mm->mmap_sem);
}
@@ -429,7 +435,11 @@
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
- fault = handle_mm_fault(mm, vma, address, write);
+ fault = handle_mm_fault(mm, vma, address, flags);
+
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return 0;
+
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
@@ -437,10 +447,22 @@
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
+ if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+ if (fault & VM_FAULT_RETRY) {
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+ /*
+ * No need to up_read(&mm->mmap_sem) as we would
+ * have already released it in __lock_page_or_retry
+ * in mm/filemap.c.
+ */
+ goto retry;
+ }
+ }
#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
/*
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
index 499f737..dbcbdf7 100644
--- a/arch/tile/mm/homecache.c
+++ b/arch/tile/mm/homecache.c
@@ -30,6 +30,7 @@
#include <linux/cache.h>
#include <linux/smp.h>
#include <linux/module.h>
+#include <linux/hugetlb.h>
#include <asm/page.h>
#include <asm/sections.h>
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index 42cfcba..812e2d0 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -27,85 +27,161 @@
#include <linux/mman.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+
+/*
+ * Provide an additional huge page size (in addition to the regular default
+ * huge page size) if no "hugepagesz" arguments are specified.
+ * Note that it must be smaller than the default huge page size so
+ * that it's possible to allocate them on demand from the buddy allocator.
+ * You can change this to 64K (on a 16K build), 256K, 1M, or 4M,
+ * or not define it at all.
+ */
+#define ADDITIONAL_HUGE_SIZE (1024 * 1024UL)
+
+/* "Extra" page-size multipliers, one per level of the page table. */
+int huge_shift[HUGE_SHIFT_ENTRIES] = {
+#ifdef ADDITIONAL_HUGE_SIZE
+#define ADDITIONAL_HUGE_SHIFT __builtin_ctzl(ADDITIONAL_HUGE_SIZE / PAGE_SIZE)
+ [HUGE_SHIFT_PAGE] = ADDITIONAL_HUGE_SHIFT
+#endif
+};
+
+/*
+ * This routine is a hybrid of pte_alloc_map() and pte_alloc_kernel().
+ * It assumes that L2 PTEs are never in HIGHMEM (we don't support that).
+ * It locks the user pagetable, and bumps up the mm->nr_ptes field,
+ * but otherwise allocate the page table using the kernel versions.
+ */
+static pte_t *pte_alloc_hugetlb(struct mm_struct *mm, pmd_t *pmd,
+ unsigned long address)
+{
+ pte_t *new;
+
+ if (pmd_none(*pmd)) {
+ new = pte_alloc_one_kernel(mm, address);
+ if (!new)
+ return NULL;
+
+ smp_wmb(); /* See comment in __pte_alloc */
+
+ spin_lock(&mm->page_table_lock);
+ if (likely(pmd_none(*pmd))) { /* Has another populated it ? */
+ mm->nr_ptes++;
+ pmd_populate_kernel(mm, pmd, new);
+ new = NULL;
+ } else
+ VM_BUG_ON(pmd_trans_splitting(*pmd));
+ spin_unlock(&mm->page_table_lock);
+ if (new)
+ pte_free_kernel(mm, new);
+ }
+
+ return pte_offset_kernel(pmd, address);
+}
+#endif
pte_t *huge_pte_alloc(struct mm_struct *mm,
unsigned long addr, unsigned long sz)
{
pgd_t *pgd;
pud_t *pud;
- pte_t *pte = NULL;
- /* We do not yet support multiple huge page sizes. */
- BUG_ON(sz != PMD_SIZE);
+ addr &= -sz; /* Mask off any low bits in the address. */
pgd = pgd_offset(mm, addr);
pud = pud_alloc(mm, pgd, addr);
- if (pud)
- pte = (pte_t *) pmd_alloc(mm, pud, addr);
- BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
- return pte;
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+ if (sz >= PGDIR_SIZE) {
+ BUG_ON(sz != PGDIR_SIZE &&
+ sz != PGDIR_SIZE << huge_shift[HUGE_SHIFT_PGDIR]);
+ return (pte_t *)pud;
+ } else {
+ pmd_t *pmd = pmd_alloc(mm, pud, addr);
+ if (sz >= PMD_SIZE) {
+ BUG_ON(sz != PMD_SIZE &&
+ sz != (PMD_SIZE << huge_shift[HUGE_SHIFT_PMD]));
+ return (pte_t *)pmd;
+ }
+ else {
+ if (sz != PAGE_SIZE << huge_shift[HUGE_SHIFT_PAGE])
+ panic("Unexpected page size %#lx\n", sz);
+ return pte_alloc_hugetlb(mm, pmd, addr);
+ }
+ }
+#else
+ BUG_ON(sz != PMD_SIZE);
+ return (pte_t *) pmd_alloc(mm, pud, addr);
+#endif
+}
+
+static pte_t *get_pte(pte_t *base, int index, int level)
+{
+ pte_t *ptep = base + index;
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+ if (!pte_present(*ptep) && huge_shift[level] != 0) {
+ unsigned long mask = -1UL << huge_shift[level];
+ pte_t *super_ptep = base + (index & mask);
+ pte_t pte = *super_ptep;
+ if (pte_present(pte) && pte_super(pte))
+ ptep = super_ptep;
+ }
+#endif
+ return ptep;
}
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
pud_t *pud;
- pmd_t *pmd = NULL;
+ pmd_t *pmd;
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+ pte_t *pte;
+#endif
- pgd = pgd_offset(mm, addr);
- if (pgd_present(*pgd)) {
- pud = pud_offset(pgd, addr);
- if (pud_present(*pud))
- pmd = pmd_offset(pud, addr);
- }
- return (pte_t *) pmd;
-}
+ /* Get the top-level page table entry. */
+ pgd = (pgd_t *)get_pte((pte_t *)mm->pgd, pgd_index(addr), 0);
+ if (!pgd_present(*pgd))
+ return NULL;
-#ifdef HUGETLB_TEST
-struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
- int write)
-{
- unsigned long start = address;
- int length = 1;
- int nr;
- struct page *page;
- struct vm_area_struct *vma;
+ /* We don't have four levels. */
+ pud = pud_offset(pgd, addr);
+#ifndef __PAGETABLE_PUD_FOLDED
+# error support fourth page table level
+#endif
- vma = find_vma(mm, addr);
- if (!vma || !is_vm_hugetlb_page(vma))
- return ERR_PTR(-EINVAL);
+ /* Check for an L0 huge PTE, if we have three levels. */
+#ifndef __PAGETABLE_PMD_FOLDED
+ if (pud_huge(*pud))
+ return (pte_t *)pud;
- pte = huge_pte_offset(mm, address);
+ pmd = (pmd_t *)get_pte((pte_t *)pud_page_vaddr(*pud),
+ pmd_index(addr), 1);
+ if (!pmd_present(*pmd))
+ return NULL;
+#else
+ pmd = pmd_offset(pud, addr);
+#endif
- /* hugetlb should be locked, and hence, prefaulted */
- WARN_ON(!pte || pte_none(*pte));
+ /* Check for an L1 huge PTE. */
+ if (pmd_huge(*pmd))
+ return (pte_t *)pmd;
- page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+ /* Check for an L2 huge PTE. */
+ pte = get_pte((pte_t *)pmd_page_vaddr(*pmd), pte_index(addr), 2);
+ if (!pte_present(*pte))
+ return NULL;
+ if (pte_super(*pte))
+ return pte;
+#endif
- WARN_ON(!PageHead(page));
-
- return page;
-}
-
-int pmd_huge(pmd_t pmd)
-{
- return 0;
-}
-
-int pud_huge(pud_t pud)
-{
- return 0;
-}
-
-struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
- pmd_t *pmd, int write)
-{
return NULL;
}
-#else
-
struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
int write)
{
@@ -149,8 +225,6 @@
return 0;
}
-#endif
-
#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
unsigned long addr, unsigned long len,
@@ -322,21 +396,102 @@
return hugetlb_get_unmapped_area_topdown(file, addr, len,
pgoff, flags);
}
+#endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
+
+#ifdef CONFIG_HUGETLB_SUPER_PAGES
+static __init int __setup_hugepagesz(unsigned long ps)
+{
+ int log_ps = __builtin_ctzl(ps);
+ int level, base_shift;
+
+ if ((1UL << log_ps) != ps || (log_ps & 1) != 0) {
+ pr_warn("Not enabling %ld byte huge pages;"
+ " must be a power of four.\n", ps);
+ return -EINVAL;
+ }
+
+ if (ps > 64*1024*1024*1024UL) {
+ pr_warn("Not enabling %ld MB huge pages;"
+ " largest legal value is 64 GB .\n", ps >> 20);
+ return -EINVAL;
+ } else if (ps >= PUD_SIZE) {
+ static long hv_jpage_size;
+ if (hv_jpage_size == 0)
+ hv_jpage_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_JUMBO);
+ if (hv_jpage_size != PUD_SIZE) {
+ pr_warn("Not enabling >= %ld MB huge pages:"
+ " hypervisor reports size %ld\n",
+ PUD_SIZE >> 20, hv_jpage_size);
+ return -EINVAL;
+ }
+ level = 0;
+ base_shift = PUD_SHIFT;
+ } else if (ps >= PMD_SIZE) {
+ level = 1;
+ base_shift = PMD_SHIFT;
+ } else if (ps > PAGE_SIZE) {
+ level = 2;
+ base_shift = PAGE_SHIFT;
+ } else {
+ pr_err("hugepagesz: huge page size %ld too small\n", ps);
+ return -EINVAL;
+ }
+
+ if (log_ps != base_shift) {
+ int shift_val = log_ps - base_shift;
+ if (huge_shift[level] != 0) {
+ int old_shift = base_shift + huge_shift[level];
+ pr_warn("Not enabling %ld MB huge pages;"
+ " already have size %ld MB.\n",
+ ps >> 20, (1UL << old_shift) >> 20);
+ return -EINVAL;
+ }
+ if (hv_set_pte_super_shift(level, shift_val) != 0) {
+ pr_warn("Not enabling %ld MB huge pages;"
+ " no hypervisor support.\n", ps >> 20);
+ return -EINVAL;
+ }
+ printk(KERN_DEBUG "Enabled %ld MB huge pages\n", ps >> 20);
+ huge_shift[level] = shift_val;
+ }
+
+ hugetlb_add_hstate(log_ps - PAGE_SHIFT);
+
+ return 0;
+}
+
+static bool saw_hugepagesz;
static __init int setup_hugepagesz(char *opt)
{
- unsigned long ps = memparse(opt, &opt);
- if (ps == PMD_SIZE) {
- hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
- } else if (ps == PUD_SIZE) {
- hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
- } else {
- pr_err("hugepagesz: Unsupported page size %lu M\n",
- ps >> 20);
- return 0;
+ if (!saw_hugepagesz) {
+ saw_hugepagesz = true;
+ memset(huge_shift, 0, sizeof(huge_shift));
}
- return 1;
+ return __setup_hugepagesz(memparse(opt, NULL));
}
__setup("hugepagesz=", setup_hugepagesz);
-#endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
+#ifdef ADDITIONAL_HUGE_SIZE
+/*
+ * Provide an additional huge page size if no "hugepagesz" args are given.
+ * In that case, all the cores have properly set up their hv super_shift
+ * already, but we need to notify the hugetlb code to enable the
+ * new huge page size from the Linux point of view.
+ */
+static __init int add_default_hugepagesz(void)
+{
+ if (!saw_hugepagesz) {
+ BUILD_BUG_ON(ADDITIONAL_HUGE_SIZE >= PMD_SIZE ||
+ ADDITIONAL_HUGE_SIZE <= PAGE_SIZE);
+ BUILD_BUG_ON((PAGE_SIZE << ADDITIONAL_HUGE_SHIFT) !=
+ ADDITIONAL_HUGE_SIZE);
+ BUILD_BUG_ON(ADDITIONAL_HUGE_SHIFT & 1);
+ hugetlb_add_hstate(ADDITIONAL_HUGE_SHIFT);
+ }
+ return 0;
+}
+arch_initcall(add_default_hugepagesz);
+#endif
+
+#endif /* CONFIG_HUGETLB_SUPER_PAGES */
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index 6a9d20d..630dd2c 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -82,7 +82,7 @@
static void init_prealloc_ptes(int node, int pages)
{
- BUG_ON(pages & (HV_L2_ENTRIES-1));
+ BUG_ON(pages & (PTRS_PER_PTE - 1));
if (pages) {
num_l2_ptes[node] = pages;
l2_ptes[node] = __alloc_bootmem(pages * sizeof(pte_t),
@@ -131,14 +131,9 @@
#ifdef __tilegx__
-#if HV_L1_SIZE != HV_L2_SIZE
-# error Rework assumption that L1 and L2 page tables are same size.
-#endif
-
-/* Since pmd_t arrays and pte_t arrays are the same size, just use casts. */
static inline pmd_t *alloc_pmd(void)
{
- return (pmd_t *)alloc_pte();
+ return __alloc_bootmem(L1_KERNEL_PGTABLE_SIZE, HV_PAGE_TABLE_ALIGN, 0);
}
static inline void assign_pmd(pud_t *pud, pmd_t *pmd)
@@ -444,6 +439,7 @@
*/
static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
{
+ unsigned long long irqmask;
unsigned long address, pfn;
pmd_t *pmd;
pte_t *pte;
@@ -633,10 +629,13 @@
* - install pgtables[] as the real page table
* - flush the TLB so the new page table takes effect
*/
+ irqmask = interrupt_mask_save_mask();
+ interrupt_mask_set_mask(-1ULL);
rc = flush_and_install_context(__pa(pgtables),
init_pgprot((unsigned long)pgtables),
__get_cpu_var(current_asid),
cpumask_bits(my_cpu_mask));
+ interrupt_mask_restore_mask(irqmask);
BUG_ON(rc != 0);
/* Copy the page table back to the normal swapper_pg_dir. */
@@ -699,6 +698,7 @@
#endif /* CONFIG_HIGHMEM */
+#ifndef CONFIG_64BIT
static void __init init_free_pfn_range(unsigned long start, unsigned long end)
{
unsigned long pfn;
@@ -771,6 +771,7 @@
init_free_pfn_range(start, end);
}
}
+#endif
/*
* paging_init() sets up the page tables - note that all of lowmem is
@@ -807,7 +808,7 @@
* changing init_mm once we get up and running, and there's no
* need for e.g. vmalloc_sync_all().
*/
- BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END));
+ BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END - 1));
pud = pud_offset(pgd_base + pgd_index(VMALLOC_START), VMALLOC_START);
assign_pmd(pud, alloc_pmd());
#endif
@@ -859,8 +860,10 @@
/* this will put all bootmem onto the freelists */
totalram_pages += free_all_bootmem();
+#ifndef CONFIG_64BIT
/* count all remaining LOWMEM and give all HIGHMEM to page allocator */
set_non_bootmem_pages_init();
+#endif
codesize = (unsigned long)&_etext - (unsigned long)&_text;
datasize = (unsigned long)&_end - (unsigned long)&_sdata;
diff --git a/arch/tile/mm/migrate.h b/arch/tile/mm/migrate.h
index cd45a08..91683d9 100644
--- a/arch/tile/mm/migrate.h
+++ b/arch/tile/mm/migrate.h
@@ -24,6 +24,9 @@
/*
* This function is used as a helper when setting up the initial
* page table (swapper_pg_dir).
+ *
+ * You must mask ALL interrupts prior to invoking this code, since
+ * you can't legally touch the stack during the cache flush.
*/
extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
HV_ASID asid,
@@ -39,6 +42,9 @@
*
* Note that any non-NULL pointers must not point to the page that
* is handled by the stack_pte itself.
+ *
+ * You must mask ALL interrupts prior to invoking this code, since
+ * you can't legally touch the stack during the cache flush.
*/
extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va,
size_t length, pte_t *stack_ptep,
diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S
index ac01a7c..5305814 100644
--- a/arch/tile/mm/migrate_32.S
+++ b/arch/tile/mm/migrate_32.S
@@ -40,8 +40,7 @@
#define FRAME_R32 16
#define FRAME_R33 20
#define FRAME_R34 24
-#define FRAME_R35 28
-#define FRAME_SIZE 32
+#define FRAME_SIZE 28
@@ -66,12 +65,11 @@
#define r_my_cpumask r5
/* Locals (callee-save); must not be more than FRAME_xxx above. */
-#define r_save_ics r30
-#define r_context_lo r31
-#define r_context_hi r32
-#define r_access_lo r33
-#define r_access_hi r34
-#define r_asid r35
+#define r_context_lo r30
+#define r_context_hi r31
+#define r_access_lo r32
+#define r_access_hi r33
+#define r_asid r34
STD_ENTRY(flush_and_install_context)
/*
@@ -104,11 +102,7 @@
sw r_tmp, r33
addi r_tmp, sp, FRAME_R34
}
- {
- sw r_tmp, r34
- addi r_tmp, sp, FRAME_R35
- }
- sw r_tmp, r35
+ sw r_tmp, r34
/* Move some arguments to callee-save registers. */
{
@@ -121,13 +115,6 @@
}
move r_asid, r_asid_in
- /* Disable interrupts, since we can't use our stack. */
- {
- mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
- movei r_tmp, 1
- }
- mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
-
/* First, flush our L2 cache. */
{
move r0, zero /* cache_pa */
@@ -163,7 +150,7 @@
}
{
move r4, r_asid
- movei r5, HV_CTX_DIRECTIO
+ moveli r5, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
}
jal hv_install_context
bnz r0, .Ldone
@@ -175,9 +162,6 @@
}
.Ldone:
- /* Reset interrupts back how they were before. */
- mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
-
/* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE
{
@@ -202,10 +186,6 @@
}
{
lw r34, r_tmp
- addli r_tmp, sp, FRAME_R35
- }
- {
- lw r35, r_tmp
addi sp, sp, FRAME_SIZE
}
jrp lr
diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S
index e76fea6..1d15b108 100644
--- a/arch/tile/mm/migrate_64.S
+++ b/arch/tile/mm/migrate_64.S
@@ -38,8 +38,7 @@
#define FRAME_R30 16
#define FRAME_R31 24
#define FRAME_R32 32
-#define FRAME_R33 40
-#define FRAME_SIZE 48
+#define FRAME_SIZE 40
@@ -60,10 +59,9 @@
#define r_my_cpumask r3
/* Locals (callee-save); must not be more than FRAME_xxx above. */
-#define r_save_ics r30
-#define r_context r31
-#define r_access r32
-#define r_asid r33
+#define r_context r30
+#define r_access r31
+#define r_asid r32
/*
* Caller-save locals and frame constants are the same as
@@ -93,11 +91,7 @@
st r_tmp, r31
addi r_tmp, sp, FRAME_R32
}
- {
- st r_tmp, r32
- addi r_tmp, sp, FRAME_R33
- }
- st r_tmp, r33
+ st r_tmp, r32
/* Move some arguments to callee-save registers. */
{
@@ -106,13 +100,6 @@
}
move r_asid, r_asid_in
- /* Disable interrupts, since we can't use our stack. */
- {
- mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
- movei r_tmp, 1
- }
- mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
-
/* First, flush our L2 cache. */
{
move r0, zero /* cache_pa */
@@ -147,7 +134,7 @@
}
{
move r2, r_asid
- movei r3, HV_CTX_DIRECTIO
+ moveli r3, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
}
jal hv_install_context
bnez r0, 1f
@@ -158,10 +145,7 @@
jal hv_flush_all
}
-1: /* Reset interrupts back how they were before. */
- mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
-
- /* Restore the callee-saved registers and return. */
+1: /* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE
{
ld lr, lr
@@ -177,10 +161,6 @@
}
{
ld r32, r_tmp
- addli r_tmp, sp, FRAME_R33
- }
- {
- ld r33, r_tmp
addi sp, sp, FRAME_SIZE
}
jrp lr
diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c
index 2410aa89..345edfe 100644
--- a/arch/tile/mm/pgtable.c
+++ b/arch/tile/mm/pgtable.c
@@ -132,15 +132,6 @@
set_pte_pfn(address, phys >> PAGE_SHIFT, flags);
}
-#if defined(CONFIG_HIGHPTE)
-pte_t *_pte_offset_map(pmd_t *dir, unsigned long address)
-{
- pte_t *pte = kmap_atomic(pmd_page(*dir)) +
- (pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK;
- return &pte[pte_index(address)];
-}
-#endif
-
/**
* shatter_huge_page() - ensure a given address is mapped by a small page.
*
@@ -289,33 +280,26 @@
#define L2_USER_PGTABLE_PAGES (1 << L2_USER_PGTABLE_ORDER)
-struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+struct page *pgtable_alloc_one(struct mm_struct *mm, unsigned long address,
+ int order)
{
gfp_t flags = GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO;
struct page *p;
-#if L2_USER_PGTABLE_ORDER > 0
int i;
-#endif
-
-#ifdef CONFIG_HIGHPTE
- flags |= __GFP_HIGHMEM;
-#endif
p = alloc_pages(flags, L2_USER_PGTABLE_ORDER);
if (p == NULL)
return NULL;
-#if L2_USER_PGTABLE_ORDER > 0
/*
* Make every page have a page_count() of one, not just the first.
* We don't use __GFP_COMP since it doesn't look like it works
* correctly with tlb_remove_page().
*/
- for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) {
+ for (i = 1; i < order; ++i) {
init_page_count(p+i);
inc_zone_page_state(p+i, NR_PAGETABLE);
}
-#endif
pgtable_page_ctor(p);
return p;
@@ -326,28 +310,28 @@
* process). We have to correct whatever pte_alloc_one() did before
* returning the pages to the allocator.
*/
-void pte_free(struct mm_struct *mm, struct page *p)
+void pgtable_free(struct mm_struct *mm, struct page *p, int order)
{
int i;
pgtable_page_dtor(p);
__free_page(p);
- for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) {
+ for (i = 1; i < order; ++i) {
__free_page(p+i);
dec_zone_page_state(p+i, NR_PAGETABLE);
}
}
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
- unsigned long address)
+void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address, int order)
{
int i;
pgtable_page_dtor(pte);
tlb_remove_page(tlb, pte);
- for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) {
+ for (i = 1; i < order; ++i) {
tlb_remove_page(tlb, pte + i);
dec_zone_page_state(pte + i, NR_PAGETABLE);
}
@@ -490,7 +474,7 @@
/* Can this mm load a PTE with cached_priority set? */
static inline int mm_is_priority_cached(struct mm_struct *mm)
{
- return mm->context.priority_cached;
+ return mm->context.priority_cached != 0;
}
/*
@@ -500,8 +484,8 @@
void start_mm_caching(struct mm_struct *mm)
{
if (!mm_is_priority_cached(mm)) {
- mm->context.priority_cached = -1U;
- hv_set_caching(-1U);
+ mm->context.priority_cached = -1UL;
+ hv_set_caching(-1UL);
}
}
@@ -516,7 +500,7 @@
* Presumably we'll come back later and have more luck and clear
* the value then; for now we'll just keep the cache marked for priority.
*/
-static unsigned int update_priority_cached(struct mm_struct *mm)
+static unsigned long update_priority_cached(struct mm_struct *mm)
{
if (mm->context.priority_cached && down_write_trylock(&mm->mmap_sem)) {
struct vm_area_struct *vm;
diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c
index 507ea58..cd8b166 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-apei.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c
@@ -42,7 +42,8 @@
struct mce m;
/* Only corrected MC is reported */
- if (!corrected)
+ if (!corrected || !(mem_err->validation_bits &
+ CPER_MEM_VALID_PHYSICAL_ADDRESS))
return;
mce_setup(&m);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index 0c82091..413c2ce 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -126,6 +126,16 @@
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
USER
),
+ MCESEV(
+ KEEP, "HT thread notices Action required: instruction fetch error",
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
+ MCGMASK(MCG_STATUS_EIPV, 0)
+ ),
+ MCESEV(
+ AR, "Action required: instruction fetch error",
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
+ USER
+ ),
#endif
MCESEV(
PANIC, "Action required: unknown MCACOD",
@@ -165,15 +175,19 @@
};
/*
- * If the EIPV bit is set, it means the saved IP is the
- * instruction which caused the MCE.
+ * If mcgstatus indicated that ip/cs on the stack were
+ * no good, then "m->cs" will be zero and we will have
+ * to assume the worst case (IN_KERNEL) as we actually
+ * have no idea what we were executing when the machine
+ * check hit.
+ * If we do have a good "m->cs" (or a faked one in the
+ * case we were executing in VM86 mode) we can use it to
+ * distinguish an exception taken in user from from one
+ * taken in the kernel.
*/
static int error_context(struct mce *m)
{
- if (m->mcgstatus & MCG_STATUS_EIPV)
- return (m->ip && (m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
- /* Unknown, assume kernel */
- return IN_KERNEL;
+ return ((m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
}
int mce_severity(struct mce *m, int tolerant, char **msg)
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2afcbd2..b772dd6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -437,6 +437,14 @@
if (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) {
m->ip = regs->ip;
m->cs = regs->cs;
+
+ /*
+ * When in VM86 mode make the cs look like ring 3
+ * always. This is a lie, but it's better than passing
+ * the additional vm86 bit around everywhere.
+ */
+ if (v8086_mode(regs))
+ m->cs |= 3;
}
/* Use accurate RIP reporting if available. */
if (rip_msr)
@@ -641,16 +649,18 @@
* Do a quick check if any of the events requires a panic.
* This decides if we keep the events around or clear them.
*/
-static int mce_no_way_out(struct mce *m, char **msg)
+static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp)
{
- int i;
+ int i, ret = 0;
for (i = 0; i < banks; i++) {
m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
+ if (m->status & MCI_STATUS_VAL)
+ __set_bit(i, validp);
if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
- return 1;
+ ret = 1;
}
- return 0;
+ return ret;
}
/*
@@ -1013,6 +1023,7 @@
*/
int kill_it = 0;
DECLARE_BITMAP(toclear, MAX_NR_BANKS);
+ DECLARE_BITMAP(valid_banks, MAX_NR_BANKS);
char *msg = "Unknown";
atomic_inc(&mce_entry);
@@ -1027,7 +1038,8 @@
final = &__get_cpu_var(mces_seen);
*final = m;
- no_way_out = mce_no_way_out(&m, &msg);
+ memset(valid_banks, 0, sizeof(valid_banks));
+ no_way_out = mce_no_way_out(&m, &msg, valid_banks);
barrier();
@@ -1047,6 +1059,8 @@
order = mce_start(&no_way_out);
for (i = 0; i < banks; i++) {
__clear_bit(i, toclear);
+ if (!test_bit(i, valid_banks))
+ continue;
if (!mce_banks[i].ctl)
continue;
diff --git a/drivers/Makefile b/drivers/Makefile
index 0ee98d5..2ba29ff 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,7 +18,7 @@
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
-obj-$(CONFIG_ARM_AMBA) += amba/
+obj-y += amba/
# Many drivers will want to use DMA so this has to be made available
# really early.
obj-$(CONFIG_DMA_ENGINE) += dma/
diff --git a/drivers/amba/Makefile b/drivers/amba/Makefile
index 40fe740..66e81c2 100644
--- a/drivers/amba/Makefile
+++ b/drivers/amba/Makefile
@@ -1,2 +1,2 @@
-obj-y += bus.o
-
+obj-$(CONFIG_ARM_AMBA) += bus.o
+obj-$(CONFIG_TEGRA_AHB) += tegra-ahb.o
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
new file mode 100644
index 0000000..aa0b1f1
--- /dev/null
+++ b/drivers/amba/tegra-ahb.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Jay Cheng <jacheng@nvidia.com>
+ * James Wylder <james.wylder@motorola.com>
+ * Benoit Goby <benoit@android.com>
+ * Colin Cross <ccross@android.com>
+ * Hiroshi DOYU <hdoyu@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#define DRV_NAME "tegra-ahb"
+
+#define AHB_ARBITRATION_DISABLE 0x00
+#define AHB_ARBITRATION_PRIORITY_CTRL 0x04
+#define AHB_PRIORITY_WEIGHT(x) (((x) & 0x7) << 29)
+#define PRIORITY_SELECT_USB BIT(6)
+#define PRIORITY_SELECT_USB2 BIT(18)
+#define PRIORITY_SELECT_USB3 BIT(17)
+
+#define AHB_GIZMO_AHB_MEM 0x0c
+#define ENB_FAST_REARBITRATE BIT(2)
+#define DONT_SPLIT_AHB_WR BIT(7)
+
+#define AHB_GIZMO_APB_DMA 0x10
+#define AHB_GIZMO_IDE 0x18
+#define AHB_GIZMO_USB 0x1c
+#define AHB_GIZMO_AHB_XBAR_BRIDGE 0x20
+#define AHB_GIZMO_CPU_AHB_BRIDGE 0x24
+#define AHB_GIZMO_COP_AHB_BRIDGE 0x28
+#define AHB_GIZMO_XBAR_APB_CTLR 0x2c
+#define AHB_GIZMO_VCP_AHB_BRIDGE 0x30
+#define AHB_GIZMO_NAND 0x3c
+#define AHB_GIZMO_SDMMC4 0x44
+#define AHB_GIZMO_XIO 0x48
+#define AHB_GIZMO_BSEV 0x60
+#define AHB_GIZMO_BSEA 0x70
+#define AHB_GIZMO_NOR 0x74
+#define AHB_GIZMO_USB2 0x78
+#define AHB_GIZMO_USB3 0x7c
+#define IMMEDIATE BIT(18)
+
+#define AHB_GIZMO_SDMMC1 0x80
+#define AHB_GIZMO_SDMMC2 0x84
+#define AHB_GIZMO_SDMMC3 0x88
+#define AHB_MEM_PREFETCH_CFG_X 0xd8
+#define AHB_ARBITRATION_XBAR_CTRL 0xdc
+#define AHB_MEM_PREFETCH_CFG3 0xe0
+#define AHB_MEM_PREFETCH_CFG4 0xe4
+#define AHB_MEM_PREFETCH_CFG1 0xec
+#define AHB_MEM_PREFETCH_CFG2 0xf0
+#define PREFETCH_ENB BIT(31)
+#define MST_ID(x) (((x) & 0x1f) << 26)
+#define AHBDMA_MST_ID MST_ID(5)
+#define USB_MST_ID MST_ID(6)
+#define USB2_MST_ID MST_ID(18)
+#define USB3_MST_ID MST_ID(17)
+#define ADDR_BNDRY(x) (((x) & 0xf) << 21)
+#define INACTIVITY_TIMEOUT(x) (((x) & 0xffff) << 0)
+
+#define AHB_ARBITRATION_AHB_MEM_WRQUE_MST_ID 0xf8
+
+#define AHB_ARBITRATION_XBAR_CTRL_SMMU_INIT_DONE BIT(17)
+
+static struct platform_driver tegra_ahb_driver;
+
+static const u32 tegra_ahb_gizmo[] = {
+ AHB_ARBITRATION_DISABLE,
+ AHB_ARBITRATION_PRIORITY_CTRL,
+ AHB_GIZMO_AHB_MEM,
+ AHB_GIZMO_APB_DMA,
+ AHB_GIZMO_IDE,
+ AHB_GIZMO_USB,
+ AHB_GIZMO_AHB_XBAR_BRIDGE,
+ AHB_GIZMO_CPU_AHB_BRIDGE,
+ AHB_GIZMO_COP_AHB_BRIDGE,
+ AHB_GIZMO_XBAR_APB_CTLR,
+ AHB_GIZMO_VCP_AHB_BRIDGE,
+ AHB_GIZMO_NAND,
+ AHB_GIZMO_SDMMC4,
+ AHB_GIZMO_XIO,
+ AHB_GIZMO_BSEV,
+ AHB_GIZMO_BSEA,
+ AHB_GIZMO_NOR,
+ AHB_GIZMO_USB2,
+ AHB_GIZMO_USB3,
+ AHB_GIZMO_SDMMC1,
+ AHB_GIZMO_SDMMC2,
+ AHB_GIZMO_SDMMC3,
+ AHB_MEM_PREFETCH_CFG_X,
+ AHB_ARBITRATION_XBAR_CTRL,
+ AHB_MEM_PREFETCH_CFG3,
+ AHB_MEM_PREFETCH_CFG4,
+ AHB_MEM_PREFETCH_CFG1,
+ AHB_MEM_PREFETCH_CFG2,
+ AHB_ARBITRATION_AHB_MEM_WRQUE_MST_ID,
+};
+
+struct tegra_ahb {
+ void __iomem *regs;
+ struct device *dev;
+ u32 ctx[0];
+};
+
+static inline u32 gizmo_readl(struct tegra_ahb *ahb, u32 offset)
+{
+ return readl(ahb->regs + offset);
+}
+
+static inline void gizmo_writel(struct tegra_ahb *ahb, u32 value, u32 offset)
+{
+ writel(value, ahb->regs + offset);
+}
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+static int tegra_ahb_match_by_smmu(struct device *dev, void *data)
+{
+ struct tegra_ahb *ahb = dev_get_drvdata(dev);
+ struct device_node *dn = data;
+
+ return (ahb->dev->of_node == dn) ? 1 : 0;
+}
+
+int tegra_ahb_enable_smmu(struct device_node *dn)
+{
+ struct device *dev;
+ u32 val;
+ struct tegra_ahb *ahb;
+
+ dev = driver_find_device(&tegra_ahb_driver.driver, NULL, dn,
+ tegra_ahb_match_by_smmu);
+ if (!dev)
+ return -EPROBE_DEFER;
+ ahb = dev_get_drvdata(dev);
+ val = gizmo_readl(ahb, AHB_ARBITRATION_XBAR_CTRL);
+ val |= AHB_ARBITRATION_XBAR_CTRL_SMMU_INIT_DONE;
+ gizmo_writel(ahb, val, AHB_ARBITRATION_XBAR_CTRL);
+ return 0;
+}
+EXPORT_SYMBOL(tegra_ahb_enable_smmu);
+#endif
+
+static int tegra_ahb_suspend(struct device *dev)
+{
+ int i;
+ struct tegra_ahb *ahb = dev_get_drvdata(dev);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_ahb_gizmo); i++)
+ ahb->ctx[i] = gizmo_readl(ahb, tegra_ahb_gizmo[i]);
+ return 0;
+}
+
+static int tegra_ahb_resume(struct device *dev)
+{
+ int i;
+ struct tegra_ahb *ahb = dev_get_drvdata(dev);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_ahb_gizmo); i++)
+ gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]);
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm,
+ tegra_ahb_suspend,
+ tegra_ahb_resume, NULL);
+
+static void tegra_ahb_gizmo_init(struct tegra_ahb *ahb)
+{
+ u32 val;
+
+ val = gizmo_readl(ahb, AHB_GIZMO_AHB_MEM);
+ val |= ENB_FAST_REARBITRATE | IMMEDIATE | DONT_SPLIT_AHB_WR;
+ gizmo_writel(ahb, val, AHB_GIZMO_AHB_MEM);
+
+ val = gizmo_readl(ahb, AHB_GIZMO_USB);
+ val |= IMMEDIATE;
+ gizmo_writel(ahb, val, AHB_GIZMO_USB);
+
+ val = gizmo_readl(ahb, AHB_GIZMO_USB2);
+ val |= IMMEDIATE;
+ gizmo_writel(ahb, val, AHB_GIZMO_USB2);
+
+ val = gizmo_readl(ahb, AHB_GIZMO_USB3);
+ val |= IMMEDIATE;
+ gizmo_writel(ahb, val, AHB_GIZMO_USB3);
+
+ val = gizmo_readl(ahb, AHB_ARBITRATION_PRIORITY_CTRL);
+ val |= PRIORITY_SELECT_USB |
+ PRIORITY_SELECT_USB2 |
+ PRIORITY_SELECT_USB3 |
+ AHB_PRIORITY_WEIGHT(7);
+ gizmo_writel(ahb, val, AHB_ARBITRATION_PRIORITY_CTRL);
+
+ val = gizmo_readl(ahb, AHB_MEM_PREFETCH_CFG1);
+ val &= ~MST_ID(~0);
+ val |= PREFETCH_ENB |
+ AHBDMA_MST_ID |
+ ADDR_BNDRY(0xc) |
+ INACTIVITY_TIMEOUT(0x1000);
+ gizmo_writel(ahb, val, AHB_MEM_PREFETCH_CFG1);
+
+ val = gizmo_readl(ahb, AHB_MEM_PREFETCH_CFG2);
+ val &= ~MST_ID(~0);
+ val |= PREFETCH_ENB |
+ USB_MST_ID |
+ ADDR_BNDRY(0xc) |
+ INACTIVITY_TIMEOUT(0x1000);
+ gizmo_writel(ahb, val, AHB_MEM_PREFETCH_CFG2);
+
+ val = gizmo_readl(ahb, AHB_MEM_PREFETCH_CFG3);
+ val &= ~MST_ID(~0);
+ val |= PREFETCH_ENB |
+ USB3_MST_ID |
+ ADDR_BNDRY(0xc) |
+ INACTIVITY_TIMEOUT(0x1000);
+ gizmo_writel(ahb, val, AHB_MEM_PREFETCH_CFG3);
+
+ val = gizmo_readl(ahb, AHB_MEM_PREFETCH_CFG4);
+ val &= ~MST_ID(~0);
+ val |= PREFETCH_ENB |
+ USB2_MST_ID |
+ ADDR_BNDRY(0xc) |
+ INACTIVITY_TIMEOUT(0x1000);
+ gizmo_writel(ahb, val, AHB_MEM_PREFETCH_CFG4);
+}
+
+static int __devinit tegra_ahb_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct tegra_ahb *ahb;
+ size_t bytes;
+
+ bytes = sizeof(*ahb) + sizeof(u32) * ARRAY_SIZE(tegra_ahb_gizmo);
+ ahb = devm_kzalloc(&pdev->dev, bytes, GFP_KERNEL);
+ if (!ahb)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+ ahb->regs = devm_request_and_ioremap(&pdev->dev, res);
+ if (!ahb->regs)
+ return -EBUSY;
+
+ ahb->dev = &pdev->dev;
+ platform_set_drvdata(pdev, ahb);
+ tegra_ahb_gizmo_init(ahb);
+ return 0;
+}
+
+static int __devexit tegra_ahb_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id tegra_ahb_of_match[] __devinitconst = {
+ { .compatible = "nvidia,tegra30-ahb", },
+ { .compatible = "nvidia,tegra20-ahb", },
+ {},
+};
+
+static struct platform_driver tegra_ahb_driver = {
+ .probe = tegra_ahb_probe,
+ .remove = __devexit_p(tegra_ahb_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_ahb_of_match,
+ .pm = &tegra_ahb_pm,
+ },
+};
+module_platform_driver(tegra_ahb_driver);
+
+MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
+MODULE_DESCRIPTION("Tegra AHB driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7336d4a..24712ad 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -553,6 +553,7 @@
#if defined(CONFIG_HAVE_CLK)
struct clk *clk;
+ struct clk **port_clks;
#endif
/*
* These consistent DMA memory pools give us guaranteed
@@ -4027,6 +4028,9 @@
struct resource *res;
int n_ports = 0;
int rc;
+#if defined(CONFIG_HAVE_CLK)
+ int port;
+#endif
ata_print_version_once(&pdev->dev, DRV_VERSION);
@@ -4054,6 +4058,13 @@
if (!host || !hpriv)
return -ENOMEM;
+#if defined(CONFIG_HAVE_CLK)
+ hpriv->port_clks = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * n_ports,
+ GFP_KERNEL);
+ if (!hpriv->port_clks)
+ return -ENOMEM;
+#endif
host->private_data = hpriv;
hpriv->n_ports = n_ports;
hpriv->board_idx = chip_soc;
@@ -4066,9 +4077,17 @@
#if defined(CONFIG_HAVE_CLK)
hpriv->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(hpriv->clk))
- dev_notice(&pdev->dev, "cannot get clkdev\n");
+ dev_notice(&pdev->dev, "cannot get optional clkdev\n");
else
- clk_enable(hpriv->clk);
+ clk_prepare_enable(hpriv->clk);
+
+ for (port = 0; port < n_ports; port++) {
+ char port_number[16];
+ sprintf(port_number, "%d", port);
+ hpriv->port_clks[port] = clk_get(&pdev->dev, port_number);
+ if (!IS_ERR(hpriv->port_clks[port]))
+ clk_prepare_enable(hpriv->port_clks[port]);
+ }
#endif
/*
@@ -4098,9 +4117,15 @@
err:
#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(hpriv->clk)) {
- clk_disable(hpriv->clk);
+ clk_disable_unprepare(hpriv->clk);
clk_put(hpriv->clk);
}
+ for (port = 0; port < n_ports; port++) {
+ if (!IS_ERR(hpriv->port_clks[port])) {
+ clk_disable_unprepare(hpriv->port_clks[port]);
+ clk_put(hpriv->port_clks[port]);
+ }
+ }
#endif
return rc;
@@ -4119,14 +4144,21 @@
struct ata_host *host = platform_get_drvdata(pdev);
#if defined(CONFIG_HAVE_CLK)
struct mv_host_priv *hpriv = host->private_data;
+ int port;
#endif
ata_host_detach(host);
#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(hpriv->clk)) {
- clk_disable(hpriv->clk);
+ clk_disable_unprepare(hpriv->clk);
clk_put(hpriv->clk);
}
+ for (port = 0; port < host->n_ports; port++) {
+ if (!IS_ERR(hpriv->port_clks[port])) {
+ clk_disable_unprepare(hpriv->port_clks[port]);
+ clk_put(hpriv->port_clks[port]);
+ }
+ }
#endif
return 0;
}
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 165e1fe..4864407 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -12,6 +12,7 @@
config COMMON_CLK
bool
select HAVE_CLK_PREPARE
+ select CLKDEV_LOOKUP
---help---
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
@@ -22,17 +23,6 @@
menu "Common Clock Framework"
depends on COMMON_CLK
-config COMMON_CLK_DISABLE_UNUSED
- bool "Disabled unused clocks at boot"
- depends on COMMON_CLK
- ---help---
- Traverses the entire clock tree and disables any clocks that are
- enabled in hardware but have not been enabled by any device drivers.
- This saves power and keeps the software model of the clock in line
- with reality.
-
- If in doubt, say "N".
-
config COMMON_CLK_DEBUG
bool "DebugFS representation of clock tree"
depends on COMMON_CLK
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1f736bc..b9a5158 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,4 +1,7 @@
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
- clk-mux.o clk-divider.o
+ clk-mux.o clk-divider.o clk-fixed-factor.o
+# SoCs specific
+obj-$(CONFIG_ARCH_MXS) += mxs/
+obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index d5ac6a7..8ea11b44 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -45,7 +45,6 @@
return parent_rate / div;
}
-EXPORT_SYMBOL_GPL(clk_divider_recalc_rate);
/*
* The reverse of DIV_ROUND_UP: The maximum number which
@@ -68,8 +67,8 @@
if (divider->flags & CLK_DIVIDER_ONE_BASED)
maxdiv--;
- if (!best_parent_rate) {
- parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+ if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+ parent_rate = *best_parent_rate;
bestdiv = DIV_ROUND_UP(parent_rate, rate);
bestdiv = bestdiv == 0 ? 1 : bestdiv;
bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
@@ -109,24 +108,18 @@
int div;
div = clk_divider_bestdiv(hw, rate, prate);
- if (prate)
- return *prate / div;
- else {
- unsigned long r;
- r = __clk_get_rate(__clk_get_parent(hw->clk));
- return r / div;
- }
+ return *prate / div;
}
-EXPORT_SYMBOL_GPL(clk_divider_round_rate);
-static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
struct clk_divider *divider = to_clk_divider(hw);
unsigned int div;
unsigned long flags = 0;
u32 val;
- div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate;
+ div = parent_rate / rate;
if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
div--;
@@ -147,15 +140,26 @@
return 0;
}
-EXPORT_SYMBOL_GPL(clk_divider_set_rate);
-struct clk_ops clk_divider_ops = {
+const struct clk_ops clk_divider_ops = {
.recalc_rate = clk_divider_recalc_rate,
.round_rate = clk_divider_round_rate,
.set_rate = clk_divider_set_rate,
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -163,38 +167,34 @@
{
struct clk_divider *div;
struct clk *clk;
+ struct clk_init_data init;
+ /* allocate the divider */
div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
-
if (!div) {
pr_err("%s: could not allocate divider clk\n", __func__);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_divider_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
/* struct clk_divider assignments */
div->reg = reg;
div->shift = shift;
div->width = width;
div->flags = clk_divider_flags;
div->lock = lock;
+ div->hw.init = &init;
- if (parent_name) {
- div->parent[0] = kstrdup(parent_name, GFP_KERNEL);
- if (!div->parent[0])
- goto out;
- }
+ /* register the clock */
+ clk = clk_register(dev, &div->hw);
- clk = clk_register(dev, name,
- &clk_divider_ops, &div->hw,
- div->parent,
- (parent_name ? 1 : 0),
- flags);
- if (clk)
- return clk;
+ if (IS_ERR(clk))
+ kfree(div);
-out:
- kfree(div->parent[0]);
- kfree(div);
-
- return NULL;
+ return clk;
}
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
new file mode 100644
index 0000000..c8c003e
--- /dev/null
+++ b/drivers/clk/clk-fixed-factor.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Standard functionality for the common clock API.
+ */
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic fixed multiplier and divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is fixed. clk->rate = parent->rate / div * mult
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+ return parent_rate * fix->mult / fix->div;
+}
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+ unsigned long best_parent;
+
+ best_parent = (rate / fix->mult) * fix->div;
+ *prate = __clk_round_rate(__clk_get_parent(hw->clk),
+ best_parent);
+ }
+
+ return (*prate / fix->div) * fix->mult;
+}
+
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return 0;
+}
+
+struct clk_ops clk_fixed_factor_ops = {
+ .round_rate = clk_factor_round_rate,
+ .set_rate = clk_factor_set_rate,
+ .recalc_rate = clk_factor_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_fixed_factor_ops);
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div)
+{
+ struct clk_fixed_factor *fix;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ fix = kmalloc(sizeof(*fix), GFP_KERNEL);
+ if (!fix) {
+ pr_err("%s: could not allocate fixed factor clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_fixed_factor assignments */
+ fix->mult = mult;
+ fix->div = div;
+ fix->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_fixed_factor_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(dev, &fix->hw);
+
+ if (IS_ERR(clk))
+ kfree(fix);
+
+ return clk;
+}
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 90c79fb..cbd2462 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -32,51 +32,50 @@
{
return to_clk_fixed_rate(hw)->fixed_rate;
}
-EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate);
-struct clk_ops clk_fixed_rate_ops = {
+const struct clk_ops clk_fixed_rate_ops = {
.recalc_rate = clk_fixed_rate_recalc_rate,
};
EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
+/**
+ * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @fixed_rate: non-adjustable clock rate
+ */
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
unsigned long fixed_rate)
{
struct clk_fixed_rate *fixed;
- char **parent_names = NULL;
- u8 len;
+ struct clk *clk;
+ struct clk_init_data init;
+ /* allocate fixed-rate clock */
fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
-
if (!fixed) {
pr_err("%s: could not allocate fixed clk\n", __func__);
return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_fixed_rate_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
/* struct clk_fixed_rate assignments */
fixed->fixed_rate = fixed_rate;
+ fixed->hw.init = &init;
- if (parent_name) {
- parent_names = kmalloc(sizeof(char *), GFP_KERNEL);
+ /* register the clock */
+ clk = clk_register(dev, &fixed->hw);
- if (! parent_names)
- goto out;
+ if (IS_ERR(clk))
+ kfree(fixed);
- len = sizeof(char) * strlen(parent_name);
-
- parent_names[0] = kmalloc(len, GFP_KERNEL);
-
- if (!parent_names[0])
- goto out;
-
- strncpy(parent_names[0], parent_name, len);
- }
-
-out:
- return clk_register(dev, name,
- &clk_fixed_rate_ops, &fixed->hw,
- parent_names,
- (parent_name ? 1 : 0),
- flags);
+ return clk;
}
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index b5902e2..578465e0 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -28,32 +28,38 @@
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
-static void clk_gate_set_bit(struct clk_gate *gate)
+/*
+ * It works on following logic:
+ *
+ * For enabling clock, enable = 1
+ * set2dis = 1 -> clear bit -> set = 0
+ * set2dis = 0 -> set bit -> set = 1
+ *
+ * For disabling clock, enable = 0
+ * set2dis = 1 -> set bit -> set = 1
+ * set2dis = 0 -> clear bit -> set = 0
+ *
+ * So, result is always: enable xor set2dis.
+ */
+static void clk_gate_endisable(struct clk_hw *hw, int enable)
{
- u32 reg;
+ struct clk_gate *gate = to_clk_gate(hw);
+ int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
unsigned long flags = 0;
+ u32 reg;
+
+ set ^= enable;
if (gate->lock)
spin_lock_irqsave(gate->lock, flags);
reg = readl(gate->reg);
- reg |= BIT(gate->bit_idx);
- writel(reg, gate->reg);
- if (gate->lock)
- spin_unlock_irqrestore(gate->lock, flags);
-}
+ if (set)
+ reg |= BIT(gate->bit_idx);
+ else
+ reg &= ~BIT(gate->bit_idx);
-static void clk_gate_clear_bit(struct clk_gate *gate)
-{
- u32 reg;
- unsigned long flags = 0;
-
- if (gate->lock)
- spin_lock_irqsave(gate->lock, flags);
-
- reg = readl(gate->reg);
- reg &= ~BIT(gate->bit_idx);
writel(reg, gate->reg);
if (gate->lock)
@@ -62,27 +68,15 @@
static int clk_gate_enable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
-
- if (gate->flags & CLK_GATE_SET_TO_DISABLE)
- clk_gate_clear_bit(gate);
- else
- clk_gate_set_bit(gate);
+ clk_gate_endisable(hw, 1);
return 0;
}
-EXPORT_SYMBOL_GPL(clk_gate_enable);
static void clk_gate_disable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
-
- if (gate->flags & CLK_GATE_SET_TO_DISABLE)
- clk_gate_set_bit(gate);
- else
- clk_gate_clear_bit(gate);
+ clk_gate_endisable(hw, 0);
}
-EXPORT_SYMBOL_GPL(clk_gate_disable);
static int clk_gate_is_enabled(struct clk_hw *hw)
{
@@ -99,15 +93,25 @@
return reg ? 1 : 0;
}
-EXPORT_SYMBOL_GPL(clk_gate_is_enabled);
-struct clk_ops clk_gate_ops = {
+const struct clk_ops clk_gate_ops = {
.enable = clk_gate_enable,
.disable = clk_gate_disable,
.is_enabled = clk_gate_is_enabled,
};
EXPORT_SYMBOL_GPL(clk_gate_ops);
+/**
+ * clk_register_gate - register a gate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of this clock's parent
+ * @flags: framework-specific flags for this clock
+ * @reg: register address to control gating of this clock
+ * @bit_idx: which bit in the register controls gating of this clock
+ * @clk_gate_flags: gate-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
struct clk *clk_register_gate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
@@ -115,36 +119,32 @@
{
struct clk_gate *gate;
struct clk *clk;
+ struct clk_init_data init;
+ /* allocate the gate */
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-
if (!gate) {
pr_err("%s: could not allocate gated clk\n", __func__);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_gate_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
/* struct clk_gate assignments */
gate->reg = reg;
gate->bit_idx = bit_idx;
gate->flags = clk_gate_flags;
gate->lock = lock;
+ gate->hw.init = &init;
- if (parent_name) {
- gate->parent[0] = kstrdup(parent_name, GFP_KERNEL);
- if (!gate->parent[0])
- goto out;
- }
+ clk = clk_register(dev, &gate->hw);
- clk = clk_register(dev, name,
- &clk_gate_ops, &gate->hw,
- gate->parent,
- (parent_name ? 1 : 0),
- flags);
- if (clk)
- return clk;
-out:
- kfree(gate->parent[0]);
- kfree(gate);
+ if (IS_ERR(clk))
+ kfree(gate);
- return NULL;
+ return clk;
}
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index c71ad1f..fd36a8e 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -55,7 +55,6 @@
return val;
}
-EXPORT_SYMBOL_GPL(clk_mux_get_parent);
static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
{
@@ -82,35 +81,47 @@
return 0;
}
-EXPORT_SYMBOL_GPL(clk_mux_set_parent);
-struct clk_ops clk_mux_ops = {
+const struct clk_ops clk_mux_ops = {
.get_parent = clk_mux_get_parent,
.set_parent = clk_mux_set_parent,
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
struct clk *clk_register_mux(struct device *dev, const char *name,
- char **parent_names, u8 num_parents, unsigned long flags,
+ const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock)
{
struct clk_mux *mux;
+ struct clk *clk;
+ struct clk_init_data init;
- mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL);
-
+ /* allocate the mux */
+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
if (!mux) {
pr_err("%s: could not allocate mux clk\n", __func__);
return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_mux_ops;
+ init.flags = flags;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
/* struct clk_mux assignments */
mux->reg = reg;
mux->shift = shift;
mux->width = width;
mux->flags = clk_mux_flags;
mux->lock = lock;
+ mux->hw.init = &init;
- return clk_register(dev, name, &clk_mux_ops, &mux->hw,
- parent_names, num_parents, flags);
+ clk = clk_register(dev, &mux->hw);
+
+ if (IS_ERR(clk))
+ kfree(mux);
+
+ return clk;
}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9cf6f59e..687b00d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -194,9 +194,8 @@
late_initcall(clk_debug_init);
#else
static inline int clk_debug_register(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DEBUG */
+#endif
-#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED
/* caller must hold prepare_lock */
static void clk_disable_unused_subtree(struct clk *clk)
{
@@ -246,9 +245,6 @@
return 0;
}
late_initcall(clk_disable_unused);
-#else
-static inline int clk_disable_unused(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */
/*** helper functions ***/
@@ -287,7 +283,7 @@
unsigned long ret;
if (!clk) {
- ret = -EINVAL;
+ ret = 0;
goto out;
}
@@ -297,7 +293,7 @@
goto out;
if (!clk->parent)
- ret = -ENODEV;
+ ret = 0;
out:
return ret;
@@ -562,7 +558,7 @@
* @clk: the clk whose rate is being returned
*
* Simply returns the cached rate of the clk. Does not query the hardware. If
- * clk is NULL then returns -EINVAL.
+ * clk is NULL then returns 0.
*/
unsigned long clk_get_rate(struct clk *clk)
{
@@ -584,18 +580,22 @@
*/
unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
{
- unsigned long unused;
+ unsigned long parent_rate = 0;
if (!clk)
return -EINVAL;
- if (!clk->ops->round_rate)
- return clk->rate;
+ if (!clk->ops->round_rate) {
+ if (clk->flags & CLK_SET_RATE_PARENT)
+ return __clk_round_rate(clk->parent, rate);
+ else
+ return clk->rate;
+ }
- if (clk->flags & CLK_SET_RATE_PARENT)
- return clk->ops->round_rate(clk->hw, rate, &unused);
- else
- return clk->ops->round_rate(clk->hw, rate, NULL);
+ if (clk->parent)
+ parent_rate = clk->parent->rate;
+
+ return clk->ops->round_rate(clk->hw, rate, &parent_rate);
}
/**
@@ -765,25 +765,41 @@
static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
{
struct clk *top = clk;
- unsigned long best_parent_rate = clk->parent->rate;
+ unsigned long best_parent_rate = 0;
unsigned long new_rate;
- if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) {
- clk->new_rate = clk->rate;
+ /* sanity */
+ if (IS_ERR_OR_NULL(clk))
+ return NULL;
+
+ /* save parent rate, if it exists */
+ if (clk->parent)
+ best_parent_rate = clk->parent->rate;
+
+ /* never propagate up to the parent */
+ if (!(clk->flags & CLK_SET_RATE_PARENT)) {
+ if (!clk->ops->round_rate) {
+ clk->new_rate = clk->rate;
+ return NULL;
+ }
+ new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
+ goto out;
+ }
+
+ /* need clk->parent from here on out */
+ if (!clk->parent) {
+ pr_debug("%s: %s has NULL parent\n", __func__, clk->name);
return NULL;
}
- if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) {
+ if (!clk->ops->round_rate) {
top = clk_calc_new_rates(clk->parent, rate);
- new_rate = clk->new_rate = clk->parent->new_rate;
+ new_rate = clk->parent->new_rate;
goto out;
}
- if (clk->flags & CLK_SET_RATE_PARENT)
- new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
- else
- new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
+ new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
if (best_parent_rate != clk->parent->rate) {
top = clk_calc_new_rates(clk->parent, best_parent_rate);
@@ -839,7 +855,7 @@
old_rate = clk->rate;
if (clk->ops->set_rate)
- clk->ops->set_rate(clk->hw, clk->new_rate);
+ clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
if (clk->ops->recalc_rate)
clk->rate = clk->ops->recalc_rate(clk->hw,
@@ -859,38 +875,19 @@
* @clk: the clk whose rate is being changed
* @rate: the new rate for clk
*
- * In the simplest case clk_set_rate will only change the rate of clk.
+ * In the simplest case clk_set_rate will only adjust the rate of clk.
*
- * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call
- * will fail; only when the clk is disabled will it be able to change
- * its rate.
+ * Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to
+ * propagate up to clk's parent; whether or not this happens depends on the
+ * outcome of clk's .round_rate implementation. If *parent_rate is unchanged
+ * after calling .round_rate then upstream parent propagation is ignored. If
+ * *parent_rate comes back with a new rate for clk's parent then we propagate
+ * up to clk's parent and set it's rate. Upward propagation will continue
+ * until either a clk does not support the CLK_SET_RATE_PARENT flag or
+ * .round_rate stops requesting changes to clk's parent_rate.
*
- * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to
- * recursively propagate up to clk's parent; whether or not this happens
- * depends on the outcome of clk's .round_rate implementation. If
- * *parent_rate is 0 after calling .round_rate then upstream parent
- * propagation is ignored. If *parent_rate comes back with a new rate
- * for clk's parent then we propagate up to clk's parent and set it's
- * rate. Upward propagation will continue until either a clk does not
- * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting
- * changes to clk's parent_rate. If there is a failure during upstream
- * propagation then clk_set_rate will unwind and restore each clk's rate
- * that had been successfully changed. Afterwards a rate change abort
- * notification will be propagated downstream, starting from the clk
- * that failed.
- *
- * At the end of all of the rate setting, clk_set_rate internally calls
- * __clk_recalc_rates and propagates the rate changes downstream,
- * starting from the highest clk whose rate was changed. This has the
- * added benefit of propagating post-rate change notifiers.
- *
- * Note that while post-rate change and rate change abort notifications
- * are guaranteed to be sent to a clk only once per call to
- * clk_set_rate, pre-change notifications will be sent for every clk
- * whose rate is changed. Stacking pre-change notifications is noisy
- * for the drivers subscribed to them, but this allows drivers to react
- * to intermediate clk rate changes up until the point where the final
- * rate is achieved at the end of upstream propagation.
+ * Rate changes are accomplished via tree traversal that also recalculates the
+ * rates for the clocks and fires off POST_RATE_CHANGE notifiers.
*
* Returns 0 on success, -EERROR otherwise.
*/
@@ -906,6 +903,11 @@
if (rate == clk->rate)
goto out;
+ if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) {
+ ret = -EBUSY;
+ goto out;
+ }
+
/* calculate new rates and get the topmost changed clock */
top = clk_calc_new_rates(clk, rate);
if (!top) {
@@ -1175,40 +1177,41 @@
*
* Initializes the lists in struct clk, queries the hardware for the
* parent and rate and sets them both.
- *
- * Any struct clk passed into __clk_init must have the following members
- * populated:
- * .name
- * .ops
- * .hw
- * .parent_names
- * .num_parents
- * .flags
- *
- * Essentially, everything that would normally be passed into clk_register is
- * assumed to be initialized already in __clk_init. The other members may be
- * populated, but are optional.
- *
- * __clk_init is only exposed via clk-private.h and is intended for use with
- * very large numbers of clocks that need to be statically initialized. It is
- * a layering violation to include clk-private.h from any code which implements
- * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.
*/
-void __clk_init(struct device *dev, struct clk *clk)
+int __clk_init(struct device *dev, struct clk *clk)
{
- int i;
+ int i, ret = 0;
struct clk *orphan;
struct hlist_node *tmp, *tmp2;
if (!clk)
- return;
+ return -EINVAL;
mutex_lock(&prepare_lock);
/* check to see if a clock with this name is already registered */
- if (__clk_lookup(clk->name))
+ if (__clk_lookup(clk->name)) {
+ pr_debug("%s: clk %s already initialized\n",
+ __func__, clk->name);
+ ret = -EEXIST;
goto out;
+ }
+
+ /* check that clk_ops are sane. See Documentation/clk.txt */
+ if (clk->ops->set_rate &&
+ !(clk->ops->round_rate && clk->ops->recalc_rate)) {
+ pr_warning("%s: %s must implement .round_rate & .recalc_rate\n",
+ __func__, clk->name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (clk->ops->set_parent && !clk->ops->get_parent) {
+ pr_warning("%s: %s must implement .get_parent & .set_parent\n",
+ __func__, clk->name);
+ ret = -EINVAL;
+ goto out;
+ }
/* throw a WARN if any entries in parent_names are NULL */
for (i = 0; i < clk->num_parents; i++)
@@ -1302,48 +1305,130 @@
out:
mutex_unlock(&prepare_lock);
- return;
+ return ret;
}
/**
+ * __clk_register - register a clock and return a cookie.
+ *
+ * Same as clk_register, except that the .clk field inside hw shall point to a
+ * preallocated (generally statically allocated) struct clk. None of the fields
+ * of the struct clk need to be initialized.
+ *
+ * The data pointed to by .init and .clk field shall NOT be marked as init
+ * data.
+ *
+ * __clk_register is only exposed via clk-private.h and is intended for use with
+ * very large numbers of clocks that need to be statically initialized. It is
+ * a layering violation to include clk-private.h from any code which implements
+ * a clock's .ops; as such any statically initialized clock data MUST be in a
+ * separate C file from the logic that implements it's operations. Returns 0
+ * on success, otherwise an error code.
+ */
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
+{
+ int ret;
+ struct clk *clk;
+
+ clk = hw->clk;
+ clk->name = hw->init->name;
+ clk->ops = hw->init->ops;
+ clk->hw = hw;
+ clk->flags = hw->init->flags;
+ clk->parent_names = hw->init->parent_names;
+ clk->num_parents = hw->init->num_parents;
+
+ ret = __clk_init(dev, clk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return clk;
+}
+EXPORT_SYMBOL_GPL(__clk_register);
+
+/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
* @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
*
* clk_register is the primary interface for populating the clock tree with new
* clock nodes. It returns a pointer to the newly allocated struct clk which
* cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
*/
-struct clk *clk_register(struct device *dev, const char *name,
- const struct clk_ops *ops, struct clk_hw *hw,
- char **parent_names, u8 num_parents, unsigned long flags)
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
{
+ int i, ret;
struct clk *clk;
clk = kzalloc(sizeof(*clk), GFP_KERNEL);
- if (!clk)
- return NULL;
+ if (!clk) {
+ pr_err("%s: could not allocate clk\n", __func__);
+ ret = -ENOMEM;
+ goto fail_out;
+ }
- clk->name = name;
- clk->ops = ops;
+ clk->name = kstrdup(hw->init->name, GFP_KERNEL);
+ if (!clk->name) {
+ pr_err("%s: could not allocate clk->name\n", __func__);
+ ret = -ENOMEM;
+ goto fail_name;
+ }
+ clk->ops = hw->init->ops;
clk->hw = hw;
- clk->flags = flags;
- clk->parent_names = parent_names;
- clk->num_parents = num_parents;
+ clk->flags = hw->init->flags;
+ clk->num_parents = hw->init->num_parents;
hw->clk = clk;
- __clk_init(dev, clk);
+ /* allocate local copy in case parent_names is __initdata */
+ clk->parent_names = kzalloc((sizeof(char*) * clk->num_parents),
+ GFP_KERNEL);
- return clk;
+ if (!clk->parent_names) {
+ pr_err("%s: could not allocate clk->parent_names\n", __func__);
+ ret = -ENOMEM;
+ goto fail_parent_names;
+ }
+
+
+ /* copy each string name in case parent_names is __initdata */
+ for (i = 0; i < clk->num_parents; i++) {
+ clk->parent_names[i] = kstrdup(hw->init->parent_names[i],
+ GFP_KERNEL);
+ if (!clk->parent_names[i]) {
+ pr_err("%s: could not copy parent_names\n", __func__);
+ ret = -ENOMEM;
+ goto fail_parent_names_copy;
+ }
+ }
+
+ ret = __clk_init(dev, clk);
+ if (!ret)
+ return clk;
+
+fail_parent_names_copy:
+ while (--i >= 0)
+ kfree(clk->parent_names[i]);
+ kfree(clk->parent_names);
+fail_parent_names:
+ kfree(clk->name);
+fail_name:
+ kfree(clk);
+fail_out:
+ return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(clk_register);
+/**
+ * clk_unregister - unregister a currently registered clock
+ * @clk: clock to unregister
+ *
+ * Currently unimplemented.
+ */
+void clk_unregister(struct clk *clk) {}
+EXPORT_SYMBOL_GPL(clk_unregister);
+
/*** clk rate change notifiers ***/
/**
diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
new file mode 100644
index 0000000..7bedeec
--- /dev/null
+++ b/drivers/clk/mxs/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for mxs specific clk
+#
+
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+
+obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
+obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-div.c b/drivers/clk/mxs/clk-div.c
new file mode 100644
index 0000000..90e1da9
--- /dev/null
+++ b/drivers/clk/mxs/clk-div.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_div - mxs integer divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @reg: register address
+ * @busy: busy bit shift
+ *
+ * The mxs divider clock is a subclass of basic clk_divider with an
+ * addtional busy bit.
+ */
+struct clk_div {
+ struct clk_divider divider;
+ const struct clk_ops *ops;
+ void __iomem *reg;
+ u8 busy;
+};
+
+static inline struct clk_div *to_clk_div(struct clk_hw *hw)
+{
+ struct clk_divider *divider = container_of(hw, struct clk_divider, hw);
+
+ return container_of(divider, struct clk_div, divider);
+}
+
+static unsigned long clk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_div *div = to_clk_div(hw);
+
+ return div->ops->recalc_rate(&div->divider.hw, parent_rate);
+}
+
+static long clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_div *div = to_clk_div(hw);
+
+ return div->ops->round_rate(&div->divider.hw, rate, prate);
+}
+
+static int clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_div *div = to_clk_div(hw);
+ int ret;
+
+ ret = div->ops->set_rate(&div->divider.hw, rate, parent_rate);
+ if (!ret)
+ ret = mxs_clk_wait(div->reg, div->busy);
+
+ return ret;
+}
+
+static struct clk_ops clk_div_ops = {
+ .recalc_rate = clk_div_recalc_rate,
+ .round_rate = clk_div_round_rate,
+ .set_rate = clk_div_set_rate,
+};
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+ struct clk_div *div;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_div_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ div->reg = reg;
+ div->busy = busy;
+
+ div->divider.reg = reg;
+ div->divider.shift = shift;
+ div->divider.width = width;
+ div->divider.flags = CLK_DIVIDER_ONE_BASED;
+ div->divider.lock = &mxs_lock;
+ div->divider.hw.init = &init;
+ div->ops = &clk_divider_ops;
+
+ clk = clk_register(NULL, &div->divider.hw);
+ if (IS_ERR(clk))
+ kfree(div);
+
+ return clk;
+}
diff --git a/drivers/clk/mxs/clk-frac.c b/drivers/clk/mxs/clk-frac.c
new file mode 100644
index 0000000..e6aa6b5
--- /dev/null
+++ b/drivers/clk/mxs/clk-frac.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_frac - mxs fractional divider clock
+ * @hw: clk_hw for the fractional divider clock
+ * @reg: register address
+ * @shift: the divider bit shift
+ * @width: the divider bit width
+ * @busy: busy bit shift
+ *
+ * The clock is an adjustable fractional divider with a busy bit to wait
+ * when the divider is adjusted.
+ */
+struct clk_frac {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u8 busy;
+};
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ u32 div;
+
+ div = readl_relaxed(frac->reg) >> frac->shift;
+ div &= (1 << frac->width) - 1;
+
+ return (parent_rate >> frac->width) * div;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ unsigned long parent_rate = *prate;
+ u32 div;
+ u64 tmp;
+
+ if (rate > parent_rate)
+ return -EINVAL;
+
+ tmp = rate;
+ tmp <<= frac->width;
+ do_div(tmp, parent_rate);
+ div = tmp;
+
+ if (!div)
+ return -EINVAL;
+
+ return (parent_rate >> frac->width) * div;
+}
+
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ unsigned long flags;
+ u32 div, val;
+ u64 tmp;
+
+ if (rate > parent_rate)
+ return -EINVAL;
+
+ tmp = rate;
+ tmp <<= frac->width;
+ do_div(tmp, parent_rate);
+ div = tmp;
+
+ if (!div)
+ return -EINVAL;
+
+ spin_lock_irqsave(&mxs_lock, flags);
+
+ val = readl_relaxed(frac->reg);
+ val &= ~(((1 << frac->width) - 1) << frac->shift);
+ val |= div << frac->shift;
+ writel_relaxed(val, frac->reg);
+
+ spin_unlock_irqrestore(&mxs_lock, flags);
+
+ return mxs_clk_wait(frac->reg, frac->busy);
+}
+
+static struct clk_ops clk_frac_ops = {
+ .recalc_rate = clk_frac_recalc_rate,
+ .round_rate = clk_frac_round_rate,
+ .set_rate = clk_frac_set_rate,
+};
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+ struct clk_frac *frac;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+ if (!frac)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_frac_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ frac->reg = reg;
+ frac->shift = shift;
+ frac->width = width;
+ frac->busy = busy;
+ frac->hw.init = &init;
+
+ clk = clk_register(NULL, &frac->hw);
+ if (IS_ERR(clk))
+ kfree(frac);
+
+ return clk;
+}
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
new file mode 100644
index 0000000..f7be225
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/mx23.h>
+#include "clk.h"
+
+#define DIGCTRL MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
+#define CLKCTRL MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+#define PLLCTRL0 (CLKCTRL + 0x0000)
+#define CPU (CLKCTRL + 0x0020)
+#define HBUS (CLKCTRL + 0x0030)
+#define XBUS (CLKCTRL + 0x0040)
+#define XTAL (CLKCTRL + 0x0050)
+#define PIX (CLKCTRL + 0x0060)
+#define SSP (CLKCTRL + 0x0070)
+#define GPMI (CLKCTRL + 0x0080)
+#define SPDIF (CLKCTRL + 0x0090)
+#define EMI (CLKCTRL + 0x00a0)
+#define SAIF (CLKCTRL + 0x00c0)
+#define TV (CLKCTRL + 0x00d0)
+#define ETM (CLKCTRL + 0x00e0)
+#define FRAC (CLKCTRL + 0x00f0)
+#define CLKSEQ (CLKCTRL + 0x0110)
+
+#define BP_CPU_INTERRUPT_WAIT 12
+#define BP_CLKSEQ_BYPASS_SAIF 0
+#define BP_CLKSEQ_BYPASS_SSP 5
+#define BP_SAIF_DIV_FRAC_EN 16
+#define BP_FRAC_IOFRAC 24
+
+static void __init clk_misc_init(void)
+{
+ u32 val;
+
+ /* Gate off cpu clock in WFI for power saving */
+ __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+
+ /* Clear BYPASS for SAIF */
+ __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ);
+
+ /* SAIF has to use frac div for functional operation */
+ val = readl_relaxed(SAIF);
+ val |= 1 << BP_SAIF_DIV_FRAC_EN;
+ writel_relaxed(val, SAIF);
+
+ /*
+ * Source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ);
+
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac to get a 288 MHz ref_io.
+ */
+ __mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC);
+ __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
+}
+
+static struct clk_lookup uart_lookups[] __initdata = {
+ { .dev_id = "duart", },
+ { .dev_id = "mxs-auart.0", },
+ { .dev_id = "mxs-auart.1", },
+ { .dev_id = "8006c000.serial", },
+ { .dev_id = "8006e000.serial", },
+ { .dev_id = "80070000.serial", },
+};
+
+static struct clk_lookup hbus_lookups[] __initdata = {
+ { .dev_id = "imx23-dma-apbh", },
+ { .dev_id = "80004000.dma-apbh", },
+};
+
+static struct clk_lookup xbus_lookups[] __initdata = {
+ { .dev_id = "duart", .con_id = "apb_pclk"},
+ { .dev_id = "80070000.serial", .con_id = "apb_pclk"},
+ { .dev_id = "imx23-dma-apbx", },
+ { .dev_id = "80024000.dma-apbx", },
+};
+
+static struct clk_lookup ssp_lookups[] __initdata = {
+ { .dev_id = "imx23-mmc.0", },
+ { .dev_id = "imx23-mmc.1", },
+ { .dev_id = "80010000.ssp", },
+ { .dev_id = "80034000.ssp", },
+};
+
+static struct clk_lookup lcdif_lookups[] __initdata = {
+ { .dev_id = "imx23-fb", },
+ { .dev_id = "80030000.lcdif", },
+};
+
+static struct clk_lookup gpmi_lookups[] __initdata = {
+ { .dev_id = "imx23-gpmi-nand", },
+ { .dev_id = "8000c000.gpmi", },
+};
+
+static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
+static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
+static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", };
+static const char *sel_io[] __initconst = { "ref_io", "ref_xtal", };
+static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+
+enum imx23_clk {
+ ref_xtal, pll, ref_cpu, ref_emi, ref_pix, ref_io, saif_sel,
+ lcdif_sel, gpmi_sel, ssp_sel, emi_sel, cpu, etm_sel, cpu_pll,
+ cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll,
+ emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div,
+ clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif,
+ lcdif, etm, usb, usb_pwr,
+ clk_max
+};
+
+static struct clk *clks[clk_max];
+
+static enum imx23_clk clks_init_on[] __initdata = {
+ cpu, hbus, xbus, emi, uart,
+};
+
+int __init mx23_clocks_init(void)
+{
+ int i;
+
+ clk_misc_init();
+
+ clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+ clks[pll] = mxs_clk_pll("pll", "ref_xtal", PLLCTRL0, 16, 480000000);
+ clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll", FRAC, 0);
+ clks[ref_emi] = mxs_clk_ref("ref_emi", "pll", FRAC, 1);
+ clks[ref_pix] = mxs_clk_ref("ref_pix", "pll", FRAC, 2);
+ clks[ref_io] = mxs_clk_ref("ref_io", "pll", FRAC, 3);
+ clks[saif_sel] = mxs_clk_mux("saif_sel", CLKSEQ, 0, 1, sel_pll, ARRAY_SIZE(sel_pll));
+ clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 1, 1, sel_pix, ARRAY_SIZE(sel_pix));
+ clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 4, 1, sel_io, ARRAY_SIZE(sel_io));
+ clks[ssp_sel] = mxs_clk_mux("ssp_sel", CLKSEQ, 5, 1, sel_io, ARRAY_SIZE(sel_io));
+ clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 6, 1, emi_sels, ARRAY_SIZE(emi_sels));
+ clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 7, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+ clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+ clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+ clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+ clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 29);
+ clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+ clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", PIX, 0, 12, 29);
+ clks[ssp_div] = mxs_clk_div("ssp_div", "ssp_sel", SSP, 0, 9, 29);
+ clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+ clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+ clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+ clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 6, 29);
+ clks[saif_div] = mxs_clk_frac("saif_div", "saif_sel", SAIF, 0, 16, 29);
+ clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+ clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+ clks[adc] = mxs_clk_fixed_factor("adc", "clk32k", 1, 16);
+ clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll", 1, 4);
+ clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+ clks[dri] = mxs_clk_gate("dri", "ref_xtal", XTAL, 28);
+ clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+ clks[filt] = mxs_clk_gate("filt", "ref_xtal", XTAL, 30);
+ clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+ clks[ssp] = mxs_clk_gate("ssp", "ssp_div", SSP, 31);
+ clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+ clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+ clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+ clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31);
+ clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31);
+ clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+ clks[usb] = mxs_clk_gate("usb", "usb_pwr", DIGCTRL, 2);
+ clks[usb_pwr] = clk_register_gate(NULL, "usb_pwr", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i])) {
+ pr_err("i.MX23 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ return PTR_ERR(clks[i]);
+ }
+
+ clk_register_clkdev(clks[clk32k], NULL, "timrot");
+ clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
+ clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
+ clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
+ clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups));
+ clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
+ clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ mxs_timer_init(MX23_INT_TIMER0);
+
+ return 0;
+}
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
new file mode 100644
index 0000000..2826a26
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/mx28.h>
+#include "clk.h"
+
+#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+#define PLL0CTRL0 (CLKCTRL + 0x0000)
+#define PLL1CTRL0 (CLKCTRL + 0x0020)
+#define PLL2CTRL0 (CLKCTRL + 0x0040)
+#define CPU (CLKCTRL + 0x0050)
+#define HBUS (CLKCTRL + 0x0060)
+#define XBUS (CLKCTRL + 0x0070)
+#define XTAL (CLKCTRL + 0x0080)
+#define SSP0 (CLKCTRL + 0x0090)
+#define SSP1 (CLKCTRL + 0x00a0)
+#define SSP2 (CLKCTRL + 0x00b0)
+#define SSP3 (CLKCTRL + 0x00c0)
+#define GPMI (CLKCTRL + 0x00d0)
+#define SPDIF (CLKCTRL + 0x00e0)
+#define EMI (CLKCTRL + 0x00f0)
+#define SAIF0 (CLKCTRL + 0x0100)
+#define SAIF1 (CLKCTRL + 0x0110)
+#define LCDIF (CLKCTRL + 0x0120)
+#define ETM (CLKCTRL + 0x0130)
+#define ENET (CLKCTRL + 0x0140)
+#define FLEXCAN (CLKCTRL + 0x0160)
+#define FRAC0 (CLKCTRL + 0x01b0)
+#define FRAC1 (CLKCTRL + 0x01c0)
+#define CLKSEQ (CLKCTRL + 0x01d0)
+
+#define BP_CPU_INTERRUPT_WAIT 12
+#define BP_SAIF_DIV_FRAC_EN 16
+#define BP_ENET_DIV_TIME 21
+#define BP_ENET_SLEEP 31
+#define BP_CLKSEQ_BYPASS_SAIF0 0
+#define BP_CLKSEQ_BYPASS_SSP0 3
+#define BP_FRAC0_IO1FRAC 16
+#define BP_FRAC0_IO0FRAC 24
+
+#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+#define BP_SAIF_CLKMUX 10
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ * clock pins selected for SAIF1 input clocks.
+ * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ * SAIF0 clock inputs selected for SAIF1 input clocks.
+ * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ * clocks.
+ * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ * clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+ if (clkmux > 0x3)
+ return -EINVAL;
+
+ __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
+ __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+
+ return 0;
+}
+
+static void __init clk_misc_init(void)
+{
+ u32 val;
+
+ /* Gate off cpu clock in WFI for power saving */
+ __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+
+ /* 0 is a bad default value for a divider */
+ __mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+
+ /* Clear BYPASS for SAIF */
+ __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+
+ /* SAIF has to use frac div for functional operation */
+ val = readl_relaxed(SAIF0);
+ val |= 1 << BP_SAIF_DIV_FRAC_EN;
+ writel_relaxed(val, SAIF0);
+
+ val = readl_relaxed(SAIF1);
+ val |= 1 << BP_SAIF_DIV_FRAC_EN;
+ writel_relaxed(val, SAIF1);
+
+ /* Extra fec clock setting */
+ val = readl_relaxed(ENET);
+ val &= ~(1 << BP_ENET_SLEEP);
+ writel_relaxed(val, ENET);
+
+ /*
+ * Source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac0 to get a 288 MHz ref_io0.
+ */
+ val = readl_relaxed(FRAC0);
+ val &= ~(0x3f << BP_FRAC0_IO0FRAC);
+ val |= 30 << BP_FRAC0_IO0FRAC;
+ writel_relaxed(val, FRAC0);
+}
+
+static struct clk_lookup uart_lookups[] __initdata = {
+ { .dev_id = "duart", },
+ { .dev_id = "mxs-auart.0", },
+ { .dev_id = "mxs-auart.1", },
+ { .dev_id = "mxs-auart.2", },
+ { .dev_id = "mxs-auart.3", },
+ { .dev_id = "mxs-auart.4", },
+ { .dev_id = "8006a000.serial", },
+ { .dev_id = "8006c000.serial", },
+ { .dev_id = "8006e000.serial", },
+ { .dev_id = "80070000.serial", },
+ { .dev_id = "80072000.serial", },
+ { .dev_id = "80074000.serial", },
+};
+
+static struct clk_lookup hbus_lookups[] __initdata = {
+ { .dev_id = "imx28-dma-apbh", },
+ { .dev_id = "80004000.dma-apbh", },
+};
+
+static struct clk_lookup xbus_lookups[] __initdata = {
+ { .dev_id = "duart", .con_id = "apb_pclk"},
+ { .dev_id = "80074000.serial", .con_id = "apb_pclk"},
+ { .dev_id = "imx28-dma-apbx", },
+ { .dev_id = "80024000.dma-apbx", },
+};
+
+static struct clk_lookup ssp0_lookups[] __initdata = {
+ { .dev_id = "imx28-mmc.0", },
+ { .dev_id = "80010000.ssp", },
+};
+
+static struct clk_lookup ssp1_lookups[] __initdata = {
+ { .dev_id = "imx28-mmc.1", },
+ { .dev_id = "80012000.ssp", },
+};
+
+static struct clk_lookup ssp2_lookups[] __initdata = {
+ { .dev_id = "imx28-mmc.2", },
+ { .dev_id = "80014000.ssp", },
+};
+
+static struct clk_lookup ssp3_lookups[] __initdata = {
+ { .dev_id = "imx28-mmc.3", },
+ { .dev_id = "80016000.ssp", },
+};
+
+static struct clk_lookup lcdif_lookups[] __initdata = {
+ { .dev_id = "imx28-fb", },
+ { .dev_id = "80030000.lcdif", },
+};
+
+static struct clk_lookup gpmi_lookups[] __initdata = {
+ { .dev_id = "imx28-gpmi-nand", },
+ { .dev_id = "8000c000.gpmi", },
+};
+
+static struct clk_lookup fec_lookups[] __initdata = {
+ { .dev_id = "imx28-fec.0", },
+ { .dev_id = "imx28-fec.1", },
+ { .dev_id = "800f0000.ethernet", },
+ { .dev_id = "800f4000.ethernet", },
+};
+
+static struct clk_lookup can0_lookups[] __initdata = {
+ { .dev_id = "flexcan.0", },
+ { .dev_id = "80032000.can", },
+};
+
+static struct clk_lookup can1_lookups[] __initdata = {
+ { .dev_id = "flexcan.1", },
+ { .dev_id = "80034000.can", },
+};
+
+static struct clk_lookup saif0_lookups[] __initdata = {
+ { .dev_id = "mxs-saif.0", },
+ { .dev_id = "80042000.saif", },
+};
+
+static struct clk_lookup saif1_lookups[] __initdata = {
+ { .dev_id = "mxs-saif.1", },
+ { .dev_id = "80046000.saif", },
+};
+
+static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
+static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", };
+static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", };
+static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", };
+static const char *sel_gpmi[] __initconst = { "ref_gpmi", "ref_xtal", };
+static const char *sel_pll0[] __initconst = { "pll0", "ref_xtal", };
+static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+static const char *ptp_sels[] __initconst = { "ref_xtal", "pll0", };
+
+enum imx28_clk {
+ ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1,
+ ref_pix, ref_hsadc, ref_gpmi, saif0_sel, saif1_sel, gpmi_sel,
+ ssp0_sel, ssp1_sel, ssp2_sel, ssp3_sel, emi_sel, etm_sel,
+ lcdif_sel, cpu, ptp_sel, cpu_pll, cpu_xtal, hbus, xbus,
+ ssp0_div, ssp1_div, ssp2_div, ssp3_div, gpmi_div, emi_pll,
+ emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div,
+ clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
+ ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
+ fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out,
+ clk_max
+};
+
+static struct clk *clks[clk_max];
+
+static enum imx28_clk clks_init_on[] __initdata = {
+ cpu, hbus, xbus, emi, uart,
+};
+
+int __init mx28_clocks_init(void)
+{
+ int i;
+
+ clk_misc_init();
+
+ clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+ clks[pll0] = mxs_clk_pll("pll0", "ref_xtal", PLL0CTRL0, 17, 480000000);
+ clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000);
+ clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
+ clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
+ clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
+ clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
+ clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+ clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
+ clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
+ clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
+ clks[saif0_sel] = mxs_clk_mux("saif0_sel", CLKSEQ, 0, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+ clks[saif1_sel] = mxs_clk_mux("saif1_sel", CLKSEQ, 1, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+ clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 2, 1, sel_gpmi, ARRAY_SIZE(sel_gpmi));
+ clks[ssp0_sel] = mxs_clk_mux("ssp0_sel", CLKSEQ, 3, 1, sel_io0, ARRAY_SIZE(sel_io0));
+ clks[ssp1_sel] = mxs_clk_mux("ssp1_sel", CLKSEQ, 4, 1, sel_io0, ARRAY_SIZE(sel_io0));
+ clks[ssp2_sel] = mxs_clk_mux("ssp2_sel", CLKSEQ, 5, 1, sel_io1, ARRAY_SIZE(sel_io1));
+ clks[ssp3_sel] = mxs_clk_mux("ssp3_sel", CLKSEQ, 6, 1, sel_io1, ARRAY_SIZE(sel_io1));
+ clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 7, 1, emi_sels, ARRAY_SIZE(emi_sels));
+ clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+ clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 14, 1, sel_pix, ARRAY_SIZE(sel_pix));
+ clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 18, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+ clks[ptp_sel] = mxs_clk_mux("ptp_sel", ENET, 19, 1, ptp_sels, ARRAY_SIZE(ptp_sels));
+ clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+ clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+ clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 31);
+ clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+ clks[ssp0_div] = mxs_clk_div("ssp0_div", "ssp0_sel", SSP0, 0, 9, 29);
+ clks[ssp1_div] = mxs_clk_div("ssp1_div", "ssp1_sel", SSP1, 0, 9, 29);
+ clks[ssp2_div] = mxs_clk_div("ssp2_div", "ssp2_sel", SSP2, 0, 9, 29);
+ clks[ssp3_div] = mxs_clk_div("ssp3_div", "ssp3_sel", SSP3, 0, 9, 29);
+ clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+ clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+ clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+ clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", LCDIF, 0, 13, 29);
+ clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 7, 29);
+ clks[ptp] = mxs_clk_div("ptp", "ptp_sel", ENET, 21, 6, 27);
+ clks[saif0_div] = mxs_clk_frac("saif0_div", "saif0_sel", SAIF0, 0, 16, 29);
+ clks[saif1_div] = mxs_clk_frac("saif1_div", "saif1_sel", SAIF1, 0, 16, 29);
+ clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+ clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+ clks[lradc] = mxs_clk_fixed_factor("lradc", "clk32k", 1, 16);
+ clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll0", 1, 4);
+ clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+ clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+ clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+ clks[ssp0] = mxs_clk_gate("ssp0", "ssp0_div", SSP0, 31);
+ clks[ssp1] = mxs_clk_gate("ssp1", "ssp1_div", SSP1, 31);
+ clks[ssp2] = mxs_clk_gate("ssp2", "ssp2_div", SSP2, 31);
+ clks[ssp3] = mxs_clk_gate("ssp3", "ssp3_div", SSP3, 31);
+ clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+ clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+ clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+ clks[saif0] = mxs_clk_gate("saif0", "saif0_div", SAIF0, 31);
+ clks[saif1] = mxs_clk_gate("saif1", "saif1_div", SAIF1, 31);
+ clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", LCDIF, 31);
+ clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+ clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30);
+ clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30);
+ clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28);
+ clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2);
+ clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16);
+ clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock);
+ clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock);
+ clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i])) {
+ pr_err("i.MX28 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ return PTR_ERR(clks[i]);
+ }
+
+ clk_register_clkdev(clks[clk32k], NULL, "timrot");
+ clk_register_clkdev(clks[enet_out], NULL, "enet_out");
+ clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
+ clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
+ clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
+ clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups));
+ clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups));
+ clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups));
+ clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups));
+ clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
+ clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups));
+ clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups));
+ clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
+ clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
+ clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
+ clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ mxs_timer_init(MX28_INT_TIMER0);
+
+ return 0;
+}
diff --git a/drivers/clk/mxs/clk-pll.c b/drivers/clk/mxs/clk-pll.c
new file mode 100644
index 0000000..fadae41
--- /dev/null
+++ b/drivers/clk/mxs/clk-pll.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_pll - mxs pll clock
+ * @hw: clk_hw for the pll
+ * @base: base address of the pll
+ * @power: the shift of power bit
+ * @rate: the clock rate of the pll
+ *
+ * The mxs pll is a fixed rate clock with power and gate control,
+ * and the shift of gate bit is always 31.
+ */
+struct clk_pll {
+ struct clk_hw hw;
+ void __iomem *base;
+ u8 power;
+ unsigned long rate;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static int clk_pll_prepare(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ writel_relaxed(1 << pll->power, pll->base + SET);
+
+ udelay(10);
+
+ return 0;
+}
+
+static void clk_pll_unprepare(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ writel_relaxed(1 << pll->power, pll->base + CLR);
+}
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ writel_relaxed(1 << 31, pll->base + CLR);
+
+ return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ writel_relaxed(1 << 31, pll->base + SET);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ return pll->rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+ .prepare = clk_pll_prepare,
+ .unprepare = clk_pll_unprepare,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+};
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+ void __iomem *base, u8 power, unsigned long rate)
+{
+ struct clk_pll *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_pll_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ pll->base = base;
+ pll->rate = rate;
+ pll->power = power;
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/drivers/clk/mxs/clk-ref.c b/drivers/clk/mxs/clk-ref.c
new file mode 100644
index 0000000..4adeed6
--- /dev/null
+++ b/drivers/clk/mxs/clk-ref.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_ref - mxs reference clock
+ * @hw: clk_hw for the reference clock
+ * @reg: register address
+ * @idx: the index of the reference clock within the same register
+ *
+ * The mxs reference clock sources from pll. Every 4 reference clocks share
+ * one register space, and @idx is used to identify them. Each reference
+ * clock has a gate control and a fractional * divider. The rate is calculated
+ * as pll rate * (18 / FRAC), where FRAC = 18 ~ 35.
+ */
+struct clk_ref {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_ref(_hw) container_of(_hw, struct clk_ref, hw)
+
+static int clk_ref_enable(struct clk_hw *hw)
+{
+ struct clk_ref *ref = to_clk_ref(hw);
+
+ writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + CLR);
+
+ return 0;
+}
+
+static void clk_ref_disable(struct clk_hw *hw)
+{
+ struct clk_ref *ref = to_clk_ref(hw);
+
+ writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + SET);
+}
+
+static unsigned long clk_ref_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_ref *ref = to_clk_ref(hw);
+ u64 tmp = parent_rate;
+ u8 frac = (readl_relaxed(ref->reg) >> (ref->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static long clk_ref_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ u64 tmp = parent_rate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+
+ if (frac < 18)
+ frac = 18;
+ else if (frac > 35)
+ frac = 35;
+
+ tmp = parent_rate;
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int clk_ref_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_ref *ref = to_clk_ref(hw);
+ unsigned long flags;
+ u64 tmp = parent_rate;
+ u32 val;
+ u8 frac, shift = ref->idx * 8;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+
+ if (frac < 18)
+ frac = 18;
+ else if (frac > 35)
+ frac = 35;
+
+ spin_lock_irqsave(&mxs_lock, flags);
+
+ val = readl_relaxed(ref->reg);
+ val &= ~(0x3f << shift);
+ val |= frac << shift;
+ writel_relaxed(val, ref->reg);
+
+ spin_unlock_irqrestore(&mxs_lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_ref_ops = {
+ .enable = clk_ref_enable,
+ .disable = clk_ref_disable,
+ .recalc_rate = clk_ref_recalc_rate,
+ .round_rate = clk_ref_round_rate,
+ .set_rate = clk_ref_set_rate,
+};
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_ref *ref;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ ref = kzalloc(sizeof(*ref), GFP_KERNEL);
+ if (!ref)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_ref_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ ref->reg = reg;
+ ref->idx = idx;
+ ref->hw.init = &init;
+
+ clk = clk_register(NULL, &ref->hw);
+ if (IS_ERR(clk))
+ kfree(ref);
+
+ return clk;
+}
diff --git a/drivers/clk/mxs/clk.c b/drivers/clk/mxs/clk.c
new file mode 100644
index 0000000..b24d560
--- /dev/null
+++ b/drivers/clk/mxs/clk.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(mxs_lock);
+
+int mxs_clk_wait(void __iomem *reg, u8 shift)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ while (readl_relaxed(reg) & (1 << shift))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
diff --git a/drivers/clk/mxs/clk.h b/drivers/clk/mxs/clk.h
new file mode 100644
index 0000000..81421e2
--- /dev/null
+++ b/drivers/clk/mxs/clk.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MXS_CLK_H
+#define __MXS_CLK_H
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#define SET 0x4
+#define CLR 0x8
+
+extern spinlock_t mxs_lock;
+
+int mxs_clk_wait(void __iomem *reg, u8 shift);
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+ void __iomem *base, u8 power, unsigned long rate);
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+static inline struct clk *mxs_clk_fixed(const char *name, int rate)
+{
+ return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *mxs_clk_gate(const char *name,
+ const char *parent_name, void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent_name, CLK_SET_RATE_PARENT,
+ reg, shift, CLK_GATE_SET_TO_DISABLE,
+ &mxs_lock);
+}
+
+static inline struct clk *mxs_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parent_names, int num_parents)
+{
+ return clk_register_mux(NULL, name, parent_names, num_parents,
+ CLK_SET_RATE_PARENT, reg, shift, width,
+ 0, &mxs_lock);
+}
+
+static inline struct clk *mxs_clk_fixed_factor(const char *name,
+ const char *parent_name, unsigned int mult, unsigned int div)
+{
+ return clk_register_fixed_factor(NULL, name, parent_name,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif /* __MXS_CLK_H */
diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
new file mode 100644
index 0000000..cdb425d
--- /dev/null
+++ b/drivers/clk/spear/Makefile
@@ -0,0 +1,10 @@
+#
+# SPEAr Clock specific Makefile
+#
+
+obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o
+obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o
+obj-$(CONFIG_MACH_SPEAR1310) += spear1310_clock.o
+obj-$(CONFIG_MACH_SPEAR1340) += spear1340_clock.o
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
new file mode 100644
index 0000000..af34074
--- /dev/null
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Auxiliary Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-aux-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: Auxiliary Synthesizer clock
+ *
+ * Aux synth gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2 EQ1
+ * Fout2 = Fin * X/Y EQ2
+ */
+
+#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw)
+
+static struct aux_clk_masks default_aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+ .enable_bit = AUX_SYNT_ENB,
+};
+
+static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ struct aux_rate_tbl *rtbl = aux->rtbl;
+ u8 eq = rtbl[index].eq ? 1 : 2;
+
+ return (((prate / 10000) * rtbl[index].xscale) /
+ (rtbl[index].yscale * eq)) * 10000;
+}
+
+static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, aux_calc_rate,
+ aux->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_aux_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ unsigned int num = 1, den = 1, val, eqn;
+ unsigned long flags = 0;
+
+ if (aux->lock)
+ spin_lock_irqsave(aux->lock, flags);
+
+ val = readl_relaxed(aux->reg);
+
+ if (aux->lock)
+ spin_unlock_irqrestore(aux->lock, flags);
+
+ eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask;
+ if (eqn == aux->masks->eq1_mask)
+ den = 2;
+
+ /* calculate numerator */
+ num = (val >> aux->masks->xscale_sel_shift) &
+ aux->masks->xscale_sel_mask;
+
+ /* calculate denominator */
+ den *= (val >> aux->masks->yscale_sel_shift) &
+ aux->masks->yscale_sel_mask;
+
+ if (!den)
+ return 0;
+
+ return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of aux */
+static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ struct aux_rate_tbl *rtbl = aux->rtbl;
+ unsigned long val, flags = 0;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt,
+ &i);
+
+ if (aux->lock)
+ spin_lock_irqsave(aux->lock, flags);
+
+ val = readl_relaxed(aux->reg) &
+ ~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift);
+ val |= (rtbl[i].eq & aux->masks->eq_sel_mask) <<
+ aux->masks->eq_sel_shift;
+ val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift);
+ val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) <<
+ aux->masks->xscale_sel_shift;
+ val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift);
+ val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) <<
+ aux->masks->yscale_sel_shift;
+ writel_relaxed(val, aux->reg);
+
+ if (aux->lock)
+ spin_unlock_irqrestore(aux->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_aux_ops = {
+ .recalc_rate = clk_aux_recalc_rate,
+ .round_rate = clk_aux_round_rate,
+ .set_rate = clk_aux_set_rate,
+};
+
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+ u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk)
+{
+ struct clk_aux *aux;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ aux = kzalloc(sizeof(*aux), GFP_KERNEL);
+ if (!aux) {
+ pr_err("could not allocate aux clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_aux assignments */
+ if (!masks)
+ aux->masks = &default_aux_masks;
+ else
+ aux->masks = masks;
+
+ aux->reg = reg;
+ aux->rtbl = rtbl;
+ aux->rtbl_cnt = rtbl_cnt;
+ aux->lock = lock;
+ aux->hw.init = &init;
+
+ init.name = aux_name;
+ init.ops = &clk_aux_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &aux->hw);
+ if (IS_ERR_OR_NULL(clk))
+ goto free_aux;
+
+ if (gate_name) {
+ struct clk *tgate_clk;
+
+ tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg,
+ aux->masks->enable_bit, 0, lock);
+ if (IS_ERR_OR_NULL(tgate_clk))
+ goto free_aux;
+
+ if (gate_clk)
+ *gate_clk = tgate_clk;
+ }
+
+ return clk;
+
+free_aux:
+ kfree(aux);
+ pr_err("clk register failed\n");
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
new file mode 100644
index 0000000..4dbdb3f
--- /dev/null
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Fractional Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-frac-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define DIV_FACTOR_MASK 0x1FFFF
+
+/*
+ * DOC: Fractional Synthesizer clock
+ *
+ * Fout from synthesizer can be given from below equation:
+ *
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * div is (16-14 bits).(13-0 bits) (in binary)
+ *
+ * Fout = Fin/(2 * div)
+ * Fout = ((Fin / 10000)/(2 * div)) * 10000
+ * Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000
+ * Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000
+ *
+ * div << 14 simply 17 bit value written at register.
+ * Max error due to scaling down by 10000 is 10 KHz
+ */
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ struct frac_rate_tbl *rtbl = frac->rtbl;
+
+ prate /= 10000;
+ prate <<= 14;
+ prate /= (2 * rtbl[index].div);
+ prate *= 10000;
+
+ return prate;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, frac_calc_rate,
+ frac->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ unsigned long flags = 0;
+ unsigned int div = 1, val;
+
+ if (frac->lock)
+ spin_lock_irqsave(frac->lock, flags);
+
+ val = readl_relaxed(frac->reg);
+
+ if (frac->lock)
+ spin_unlock_irqrestore(frac->lock, flags);
+
+ div = val & DIV_FACTOR_MASK;
+
+ if (!div)
+ return 0;
+
+ parent_rate = parent_rate / 10000;
+
+ parent_rate = (parent_rate << 14) / (2 * div);
+ return parent_rate * 10000;
+}
+
+/* Configures new clock rate of frac */
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ struct frac_rate_tbl *rtbl = frac->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt,
+ &i);
+
+ if (frac->lock)
+ spin_lock_irqsave(frac->lock, flags);
+
+ val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK;
+ val |= rtbl[i].div & DIV_FACTOR_MASK;
+ writel_relaxed(val, frac->reg);
+
+ if (frac->lock)
+ spin_unlock_irqrestore(frac->lock, flags);
+
+ return 0;
+}
+
+struct clk_ops clk_frac_ops = {
+ .recalc_rate = clk_frac_recalc_rate,
+ .round_rate = clk_frac_round_rate,
+ .set_rate = clk_frac_set_rate,
+};
+
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_frac *frac;
+ struct clk *clk;
+
+ if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+ if (!frac) {
+ pr_err("could not allocate frac clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_frac assignments */
+ frac->reg = reg;
+ frac->rtbl = rtbl;
+ frac->rtbl_cnt = rtbl_cnt;
+ frac->lock = lock;
+ frac->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_frac_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &frac->hw);
+ if (!IS_ERR_OR_NULL(clk))
+ return clk;
+
+ pr_err("clk register failed\n");
+ kfree(frac);
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
new file mode 100644
index 0000000..b471c97
--- /dev/null
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * General Purpose Timer Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-gpt-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define GPT_MSCALE_MASK 0xFFF
+#define GPT_NSCALE_SHIFT 12
+#define GPT_NSCALE_MASK 0xF
+
+/*
+ * DOC: General Purpose Timer Synthesizer clock
+ *
+ * Calculates gpt synth clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+
+#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw)
+
+static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ struct gpt_rate_tbl *rtbl = gpt->rtbl;
+
+ prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1));
+
+ return prate;
+}
+
+static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate,
+ gpt->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ unsigned long flags = 0;
+ unsigned int div = 1, val;
+
+ if (gpt->lock)
+ spin_lock_irqsave(gpt->lock, flags);
+
+ val = readl_relaxed(gpt->reg);
+
+ if (gpt->lock)
+ spin_unlock_irqrestore(gpt->lock, flags);
+
+ div += val & GPT_MSCALE_MASK;
+ div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+
+ if (!div)
+ return 0;
+
+ return parent_rate / div;
+}
+
+/* Configures new clock rate of gpt */
+static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ struct gpt_rate_tbl *rtbl = gpt->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt,
+ &i);
+
+ if (gpt->lock)
+ spin_lock_irqsave(gpt->lock, flags);
+
+ val = readl(gpt->reg) & ~GPT_MSCALE_MASK;
+ val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT);
+
+ val |= rtbl[i].mscale & GPT_MSCALE_MASK;
+ val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT;
+
+ writel_relaxed(val, gpt->reg);
+
+ if (gpt->lock)
+ spin_unlock_irqrestore(gpt->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_gpt_ops = {
+ .recalc_rate = clk_gpt_recalc_rate,
+ .round_rate = clk_gpt_round_rate,
+ .set_rate = clk_gpt_set_rate,
+};
+
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+ long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+ rtbl_cnt, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_gpt *gpt;
+ struct clk *clk;
+
+ if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ gpt = kzalloc(sizeof(*gpt), GFP_KERNEL);
+ if (!gpt) {
+ pr_err("could not allocate gpt clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_gpt assignments */
+ gpt->reg = reg;
+ gpt->rtbl = rtbl;
+ gpt->rtbl_cnt = rtbl_cnt;
+ gpt->lock = lock;
+ gpt->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_gpt_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &gpt->hw);
+ if (!IS_ERR_OR_NULL(clk))
+ return clk;
+
+ pr_err("clk register failed\n");
+ kfree(gpt);
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
new file mode 100644
index 0000000..dcd4bdf
--- /dev/null
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * VCO-PLL clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-vco-pll: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: VCO-PLL clock
+ *
+ * VCO and PLL rate are derived from following equations:
+ *
+ * In normal mode
+ * vco = (2 * M[15:8] * Fin)/N
+ *
+ * In Dithered mode
+ * vco = (2 * M[15:0] * Fin)/(256 * N)
+ *
+ * pll_rate = pll/2^p
+ *
+ * vco and pll are very closely bound to each other, "vco needs to program:
+ * mode, m & n" and "pll needs to program p", both share common enable/disable
+ * logic.
+ *
+ * clk_register_vco_pll() registers instances of both vco & pll.
+ * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its
+ * set_rate to vco. A single rate table exists for both the clocks, which
+ * configures m, n and p.
+ */
+
+/* PLL_CTR register masks */
+#define PLL_MODE_NORMAL 0
+#define PLL_MODE_FRACTION 1
+#define PLL_MODE_DITH_DSM 2
+#define PLL_MODE_DITH_SSM 3
+#define PLL_MODE_MASK 3
+#define PLL_MODE_SHIFT 3
+#define PLL_ENABLE 2
+
+#define PLL_LOCK_SHIFT 0
+#define PLL_LOCK_MASK 1
+
+/* PLL FRQ register masks */
+#define PLL_NORM_FDBK_M_MASK 0xFF
+#define PLL_NORM_FDBK_M_SHIFT 24
+#define PLL_DITH_FDBK_M_MASK 0xFFFF
+#define PLL_DITH_FDBK_M_SHIFT 16
+#define PLL_DIV_P_MASK 0x7
+#define PLL_DIV_P_SHIFT 8
+#define PLL_DIV_N_MASK 0xFF
+#define PLL_DIV_N_SHIFT 0
+
+#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw)
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Calculates pll clk rate for specific value of mode, m, n and p */
+static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl,
+ unsigned long prate, int index, unsigned long *pll_rate)
+{
+ unsigned long rate = prate;
+ unsigned int mode;
+
+ mode = rtbl[index].mode ? 256 : 1;
+ rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n));
+
+ if (pll_rate)
+ *pll_rate = (rate / (1 << rtbl[index].p)) * 10000;
+
+ return rate * 10000;
+}
+
+static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate, int *index)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ unsigned long prev_rate, vco_prev_rate, rate = 0;
+ unsigned long vco_parent_rate =
+ __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
+
+ if (!prate) {
+ pr_err("%s: prate is must for pll clk\n", __func__);
+ return -EINVAL;
+ }
+
+ for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) {
+ prev_rate = rate;
+ vco_prev_rate = *prate;
+ *prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index,
+ &rate);
+ if (drate < rate) {
+ /* previous clock was best */
+ if (*index) {
+ rate = prev_rate;
+ *prate = vco_prev_rate;
+ (*index)--;
+ }
+ break;
+ }
+ }
+
+ return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ int unused;
+
+ return clk_pll_round_rate_index(hw, drate, prate, &unused);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long
+ parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ unsigned int p;
+
+ if (pll->vco->lock)
+ spin_lock_irqsave(pll->vco->lock, flags);
+
+ p = readl_relaxed(pll->vco->cfg_reg);
+
+ if (pll->vco->lock)
+ spin_unlock_irqrestore(pll->vco->lock, flags);
+
+ p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+
+ return parent_rate / (1 << p);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct pll_rate_tbl *rtbl = pll->vco->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_pll_round_rate_index(hw, drate, NULL, &i);
+
+ if (pll->vco->lock)
+ spin_lock_irqsave(pll->vco->lock, flags);
+
+ val = readl_relaxed(pll->vco->cfg_reg);
+ val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT);
+ val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT;
+ writel_relaxed(val, pll->vco->cfg_reg);
+
+ if (pll->vco->lock)
+ spin_unlock_irqrestore(pll->vco->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_pll_ops = {
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+static inline unsigned long vco_calc_rate(struct clk_hw *hw,
+ unsigned long prate, int index)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+
+ return pll_calc_rate(vco->rtbl, prate, index, NULL);
+}
+
+static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, vco_calc_rate,
+ vco->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ unsigned long flags = 0;
+ unsigned int num = 2, den = 0, val, mode = 0;
+
+ if (vco->lock)
+ spin_lock_irqsave(vco->lock, flags);
+
+ mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK;
+
+ val = readl_relaxed(vco->cfg_reg);
+
+ if (vco->lock)
+ spin_unlock_irqrestore(vco->lock, flags);
+
+ den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+ /* calculate numerator & denominator */
+ if (!mode) {
+ /* Normal mode */
+ num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ } else {
+ /* Dithered mode */
+ num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ den *= 256;
+ }
+
+ if (!den) {
+ WARN(1, "%s: denominator can't be zero\n", __func__);
+ return 0;
+ }
+
+ return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of vco */
+static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ struct pll_rate_tbl *rtbl = vco->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt,
+ &i);
+
+ if (vco->lock)
+ spin_lock_irqsave(vco->lock, flags);
+
+ val = readl_relaxed(vco->mode_reg);
+ val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT);
+ val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT;
+ writel_relaxed(val, vco->mode_reg);
+
+ val = readl_relaxed(vco->cfg_reg);
+ val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT);
+ val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT;
+
+ val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT);
+ if (rtbl[i].mode)
+ val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) <<
+ PLL_DITH_FDBK_M_SHIFT;
+ else
+ val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) <<
+ PLL_NORM_FDBK_M_SHIFT;
+
+ writel_relaxed(val, vco->cfg_reg);
+
+ if (vco->lock)
+ spin_unlock_irqrestore(vco->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_vco_ops = {
+ .recalc_rate = clk_vco_recalc_rate,
+ .round_rate = clk_vco_round_rate,
+ .set_rate = clk_vco_set_rate,
+};
+
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+ const char *vco_gate_name, const char *parent_name,
+ unsigned long flags, void __iomem *mode_reg, void __iomem
+ *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+ spinlock_t *lock, struct clk **pll_clk,
+ struct clk **vco_gate_clk)
+{
+ struct clk_vco *vco;
+ struct clk_pll *pll;
+ struct clk *vco_clk, *tpll_clk, *tvco_gate_clk;
+ struct clk_init_data vco_init, pll_init;
+ const char **vco_parent_name;
+
+ if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg ||
+ !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+ if (!vco) {
+ pr_err("could not allocate vco clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("could not allocate pll clk\n");
+ goto free_vco;
+ }
+
+ /* struct clk_vco assignments */
+ vco->mode_reg = mode_reg;
+ vco->cfg_reg = cfg_reg;
+ vco->rtbl = rtbl;
+ vco->rtbl_cnt = rtbl_cnt;
+ vco->lock = lock;
+ vco->hw.init = &vco_init;
+
+ pll->vco = vco;
+ pll->hw.init = &pll_init;
+
+ if (vco_gate_name) {
+ tvco_gate_clk = clk_register_gate(NULL, vco_gate_name,
+ parent_name, 0, mode_reg, PLL_ENABLE, 0, lock);
+ if (IS_ERR_OR_NULL(tvco_gate_clk))
+ goto free_pll;
+
+ if (vco_gate_clk)
+ *vco_gate_clk = tvco_gate_clk;
+ vco_parent_name = &vco_gate_name;
+ } else {
+ vco_parent_name = &parent_name;
+ }
+
+ vco_init.name = vco_name;
+ vco_init.ops = &clk_vco_ops;
+ vco_init.flags = flags;
+ vco_init.parent_names = vco_parent_name;
+ vco_init.num_parents = 1;
+
+ pll_init.name = pll_name;
+ pll_init.ops = &clk_pll_ops;
+ pll_init.flags = CLK_SET_RATE_PARENT;
+ pll_init.parent_names = &vco_name;
+ pll_init.num_parents = 1;
+
+ vco_clk = clk_register(NULL, &vco->hw);
+ if (IS_ERR_OR_NULL(vco_clk))
+ goto free_pll;
+
+ tpll_clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR_OR_NULL(tpll_clk))
+ goto free_pll;
+
+ if (pll_clk)
+ *pll_clk = tpll_clk;
+
+ return vco_clk;
+
+free_pll:
+ kfree(pll);
+free_vco:
+ kfree(vco);
+
+ pr_err("Failed to register vco pll clock\n");
+
+ return ERR_PTR(-ENOMEM);
+}
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
new file mode 100644
index 0000000..376d4e5
--- /dev/null
+++ b/drivers/clk/spear/clk.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * SPEAr clk - Common routines
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/types.h>
+#include "clk.h"
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+ int *index)
+{
+ unsigned long prev_rate, rate = 0;
+
+ for (*index = 0; *index < rtbl_cnt; (*index)++) {
+ prev_rate = rate;
+ rate = calc_rate(hw, parent_rate, *index);
+ if (drate < rate) {
+ /* previous clock was best */
+ if (*index) {
+ rate = prev_rate;
+ (*index)--;
+ }
+ break;
+ }
+ }
+
+ return rate;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
new file mode 100644
index 0000000..3321c46
--- /dev/null
+++ b/drivers/clk/spear/clk.h
@@ -0,0 +1,134 @@
+/*
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __SPEAR_CLK_H
+#define __SPEAR_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+
+/* Auxiliary Synth clk */
+/* Default masks */
+#define AUX_EQ_SEL_SHIFT 30
+#define AUX_EQ_SEL_MASK 1
+#define AUX_EQ1_SEL 0
+#define AUX_EQ2_SEL 1
+#define AUX_XSCALE_SHIFT 16
+#define AUX_XSCALE_MASK 0xFFF
+#define AUX_YSCALE_SHIFT 0
+#define AUX_YSCALE_MASK 0xFFF
+#define AUX_SYNT_ENB 31
+
+struct aux_clk_masks {
+ u32 eq_sel_mask;
+ u32 eq_sel_shift;
+ u32 eq1_mask;
+ u32 eq2_mask;
+ u32 xscale_sel_mask;
+ u32 xscale_sel_shift;
+ u32 yscale_sel_mask;
+ u32 yscale_sel_shift;
+ u32 enable_bit;
+};
+
+struct aux_rate_tbl {
+ u16 xscale;
+ u16 yscale;
+ u8 eq;
+};
+
+struct clk_aux {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct aux_clk_masks *masks;
+ struct aux_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* Fractional Synth clk */
+struct frac_rate_tbl {
+ u32 div;
+};
+
+struct clk_frac {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct frac_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* GPT clk */
+struct gpt_rate_tbl {
+ u16 mscale;
+ u16 nscale;
+};
+
+struct clk_gpt {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct gpt_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* VCO-PLL clk */
+struct pll_rate_tbl {
+ u8 mode;
+ u16 m;
+ u8 n;
+ u8 p;
+};
+
+struct clk_vco {
+ struct clk_hw hw;
+ void __iomem *mode_reg;
+ void __iomem *cfg_reg;
+ struct pll_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+struct clk_pll {
+ struct clk_hw hw;
+ struct clk_vco *vco;
+ const char *parent[1];
+ spinlock_t *lock;
+};
+
+typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate,
+ int index);
+
+/* clk register routines */
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+ u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk);
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+ long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+ rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+ const char *vco_gate_name, const char *parent_name,
+ unsigned long flags, void __iomem *mode_reg, void __iomem
+ *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+ spinlock_t *lock, struct clk **pll_clk,
+ struct clk **vco_gate_clk);
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+ int *index);
+
+#endif /* __SPEAR_CLK_H */
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
new file mode 100644
index 0000000..42b68df
--- /dev/null
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -0,0 +1,1106 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310_clock.c
+ *
+ * SPEAr1310 machine clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include "clk.h"
+
+/* PLL related registers and bit values */
+#define SPEAR1310_PLL_CFG (VA_MISC_BASE + 0x210)
+ /* PLL_CFG bit values */
+ #define SPEAR1310_CLCD_SYNT_CLK_MASK 1
+ #define SPEAR1310_CLCD_SYNT_CLK_SHIFT 31
+ #define SPEAR1310_RAS_SYNT2_3_CLK_MASK 2
+ #define SPEAR1310_RAS_SYNT2_3_CLK_SHIFT 29
+ #define SPEAR1310_RAS_SYNT_CLK_MASK 2
+ #define SPEAR1310_RAS_SYNT0_1_CLK_SHIFT 27
+ #define SPEAR1310_PLL_CLK_MASK 2
+ #define SPEAR1310_PLL3_CLK_SHIFT 24
+ #define SPEAR1310_PLL2_CLK_SHIFT 22
+ #define SPEAR1310_PLL1_CLK_SHIFT 20
+
+#define SPEAR1310_PLL1_CTR (VA_MISC_BASE + 0x214)
+#define SPEAR1310_PLL1_FRQ (VA_MISC_BASE + 0x218)
+#define SPEAR1310_PLL2_CTR (VA_MISC_BASE + 0x220)
+#define SPEAR1310_PLL2_FRQ (VA_MISC_BASE + 0x224)
+#define SPEAR1310_PLL3_CTR (VA_MISC_BASE + 0x22C)
+#define SPEAR1310_PLL3_FRQ (VA_MISC_BASE + 0x230)
+#define SPEAR1310_PLL4_CTR (VA_MISC_BASE + 0x238)
+#define SPEAR1310_PLL4_FRQ (VA_MISC_BASE + 0x23C)
+#define SPEAR1310_PERIP_CLK_CFG (VA_MISC_BASE + 0x244)
+ /* PERIP_CLK_CFG bit values */
+ #define SPEAR1310_GPT_OSC24_VAL 0
+ #define SPEAR1310_GPT_APB_VAL 1
+ #define SPEAR1310_GPT_CLK_MASK 1
+ #define SPEAR1310_GPT3_CLK_SHIFT 11
+ #define SPEAR1310_GPT2_CLK_SHIFT 10
+ #define SPEAR1310_GPT1_CLK_SHIFT 9
+ #define SPEAR1310_GPT0_CLK_SHIFT 8
+ #define SPEAR1310_UART_CLK_PLL5_VAL 0
+ #define SPEAR1310_UART_CLK_OSC24_VAL 1
+ #define SPEAR1310_UART_CLK_SYNT_VAL 2
+ #define SPEAR1310_UART_CLK_MASK 2
+ #define SPEAR1310_UART_CLK_SHIFT 4
+
+ #define SPEAR1310_AUX_CLK_PLL5_VAL 0
+ #define SPEAR1310_AUX_CLK_SYNT_VAL 1
+ #define SPEAR1310_CLCD_CLK_MASK 2
+ #define SPEAR1310_CLCD_CLK_SHIFT 2
+ #define SPEAR1310_C3_CLK_MASK 1
+ #define SPEAR1310_C3_CLK_SHIFT 1
+
+#define SPEAR1310_GMAC_CLK_CFG (VA_MISC_BASE + 0x248)
+ #define SPEAR1310_GMAC_PHY_IF_SEL_MASK 3
+ #define SPEAR1310_GMAC_PHY_IF_SEL_SHIFT 4
+ #define SPEAR1310_GMAC_PHY_CLK_MASK 1
+ #define SPEAR1310_GMAC_PHY_CLK_SHIFT 3
+ #define SPEAR1310_GMAC_PHY_INPUT_CLK_MASK 2
+ #define SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT 1
+
+#define SPEAR1310_I2S_CLK_CFG (VA_MISC_BASE + 0x24C)
+ /* I2S_CLK_CFG register mask */
+ #define SPEAR1310_I2S_SCLK_X_MASK 0x1F
+ #define SPEAR1310_I2S_SCLK_X_SHIFT 27
+ #define SPEAR1310_I2S_SCLK_Y_MASK 0x1F
+ #define SPEAR1310_I2S_SCLK_Y_SHIFT 22
+ #define SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT 21
+ #define SPEAR1310_I2S_SCLK_SYNTH_ENB 20
+ #define SPEAR1310_I2S_PRS1_CLK_X_MASK 0xFF
+ #define SPEAR1310_I2S_PRS1_CLK_X_SHIFT 12
+ #define SPEAR1310_I2S_PRS1_CLK_Y_MASK 0xFF
+ #define SPEAR1310_I2S_PRS1_CLK_Y_SHIFT 4
+ #define SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT 3
+ #define SPEAR1310_I2S_REF_SEL_MASK 1
+ #define SPEAR1310_I2S_REF_SHIFT 2
+ #define SPEAR1310_I2S_SRC_CLK_MASK 2
+ #define SPEAR1310_I2S_SRC_CLK_SHIFT 0
+
+#define SPEAR1310_C3_CLK_SYNT (VA_MISC_BASE + 0x250)
+#define SPEAR1310_UART_CLK_SYNT (VA_MISC_BASE + 0x254)
+#define SPEAR1310_GMAC_CLK_SYNT (VA_MISC_BASE + 0x258)
+#define SPEAR1310_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x25C)
+#define SPEAR1310_CFXD_CLK_SYNT (VA_MISC_BASE + 0x260)
+#define SPEAR1310_ADC_CLK_SYNT (VA_MISC_BASE + 0x264)
+#define SPEAR1310_AMBA_CLK_SYNT (VA_MISC_BASE + 0x268)
+#define SPEAR1310_CLCD_CLK_SYNT (VA_MISC_BASE + 0x270)
+#define SPEAR1310_RAS_CLK_SYNT0 (VA_MISC_BASE + 0x280)
+#define SPEAR1310_RAS_CLK_SYNT1 (VA_MISC_BASE + 0x288)
+#define SPEAR1310_RAS_CLK_SYNT2 (VA_MISC_BASE + 0x290)
+#define SPEAR1310_RAS_CLK_SYNT3 (VA_MISC_BASE + 0x298)
+ /* Check Fractional synthesizer reg masks */
+
+#define SPEAR1310_PERIP1_CLK_ENB (VA_MISC_BASE + 0x300)
+ /* PERIP1_CLK_ENB register masks */
+ #define SPEAR1310_RTC_CLK_ENB 31
+ #define SPEAR1310_ADC_CLK_ENB 30
+ #define SPEAR1310_C3_CLK_ENB 29
+ #define SPEAR1310_JPEG_CLK_ENB 28
+ #define SPEAR1310_CLCD_CLK_ENB 27
+ #define SPEAR1310_DMA_CLK_ENB 25
+ #define SPEAR1310_GPIO1_CLK_ENB 24
+ #define SPEAR1310_GPIO0_CLK_ENB 23
+ #define SPEAR1310_GPT1_CLK_ENB 22
+ #define SPEAR1310_GPT0_CLK_ENB 21
+ #define SPEAR1310_I2S0_CLK_ENB 20
+ #define SPEAR1310_I2S1_CLK_ENB 19
+ #define SPEAR1310_I2C0_CLK_ENB 18
+ #define SPEAR1310_SSP_CLK_ENB 17
+ #define SPEAR1310_UART_CLK_ENB 15
+ #define SPEAR1310_PCIE_SATA_2_CLK_ENB 14
+ #define SPEAR1310_PCIE_SATA_1_CLK_ENB 13
+ #define SPEAR1310_PCIE_SATA_0_CLK_ENB 12
+ #define SPEAR1310_UOC_CLK_ENB 11
+ #define SPEAR1310_UHC1_CLK_ENB 10
+ #define SPEAR1310_UHC0_CLK_ENB 9
+ #define SPEAR1310_GMAC_CLK_ENB 8
+ #define SPEAR1310_CFXD_CLK_ENB 7
+ #define SPEAR1310_SDHCI_CLK_ENB 6
+ #define SPEAR1310_SMI_CLK_ENB 5
+ #define SPEAR1310_FSMC_CLK_ENB 4
+ #define SPEAR1310_SYSRAM0_CLK_ENB 3
+ #define SPEAR1310_SYSRAM1_CLK_ENB 2
+ #define SPEAR1310_SYSROM_CLK_ENB 1
+ #define SPEAR1310_BUS_CLK_ENB 0
+
+#define SPEAR1310_PERIP2_CLK_ENB (VA_MISC_BASE + 0x304)
+ /* PERIP2_CLK_ENB register masks */
+ #define SPEAR1310_THSENS_CLK_ENB 8
+ #define SPEAR1310_I2S_REF_PAD_CLK_ENB 7
+ #define SPEAR1310_ACP_CLK_ENB 6
+ #define SPEAR1310_GPT3_CLK_ENB 5
+ #define SPEAR1310_GPT2_CLK_ENB 4
+ #define SPEAR1310_KBD_CLK_ENB 3
+ #define SPEAR1310_CPU_DBG_CLK_ENB 2
+ #define SPEAR1310_DDR_CORE_CLK_ENB 1
+ #define SPEAR1310_DDR_CTRL_CLK_ENB 0
+
+#define SPEAR1310_RAS_CLK_ENB (VA_MISC_BASE + 0x310)
+ /* RAS_CLK_ENB register masks */
+ #define SPEAR1310_SYNT3_CLK_ENB 17
+ #define SPEAR1310_SYNT2_CLK_ENB 16
+ #define SPEAR1310_SYNT1_CLK_ENB 15
+ #define SPEAR1310_SYNT0_CLK_ENB 14
+ #define SPEAR1310_PCLK3_CLK_ENB 13
+ #define SPEAR1310_PCLK2_CLK_ENB 12
+ #define SPEAR1310_PCLK1_CLK_ENB 11
+ #define SPEAR1310_PCLK0_CLK_ENB 10
+ #define SPEAR1310_PLL3_CLK_ENB 9
+ #define SPEAR1310_PLL2_CLK_ENB 8
+ #define SPEAR1310_C125M_PAD_CLK_ENB 7
+ #define SPEAR1310_C30M_CLK_ENB 6
+ #define SPEAR1310_C48M_CLK_ENB 5
+ #define SPEAR1310_OSC_25M_CLK_ENB 4
+ #define SPEAR1310_OSC_32K_CLK_ENB 3
+ #define SPEAR1310_OSC_24M_CLK_ENB 2
+ #define SPEAR1310_PCLK_CLK_ENB 1
+ #define SPEAR1310_ACLK_CLK_ENB 0
+
+/* RAS Area Control Register */
+#define SPEAR1310_RAS_CTRL_REG0 (VA_SPEAR1310_RAS_BASE + 0x000)
+ #define SPEAR1310_SSP1_CLK_MASK 3
+ #define SPEAR1310_SSP1_CLK_SHIFT 26
+ #define SPEAR1310_TDM_CLK_MASK 1
+ #define SPEAR1310_TDM2_CLK_SHIFT 24
+ #define SPEAR1310_TDM1_CLK_SHIFT 23
+ #define SPEAR1310_I2C_CLK_MASK 1
+ #define SPEAR1310_I2C7_CLK_SHIFT 22
+ #define SPEAR1310_I2C6_CLK_SHIFT 21
+ #define SPEAR1310_I2C5_CLK_SHIFT 20
+ #define SPEAR1310_I2C4_CLK_SHIFT 19
+ #define SPEAR1310_I2C3_CLK_SHIFT 18
+ #define SPEAR1310_I2C2_CLK_SHIFT 17
+ #define SPEAR1310_I2C1_CLK_SHIFT 16
+ #define SPEAR1310_GPT64_CLK_MASK 1
+ #define SPEAR1310_GPT64_CLK_SHIFT 15
+ #define SPEAR1310_RAS_UART_CLK_MASK 1
+ #define SPEAR1310_UART5_CLK_SHIFT 14
+ #define SPEAR1310_UART4_CLK_SHIFT 13
+ #define SPEAR1310_UART3_CLK_SHIFT 12
+ #define SPEAR1310_UART2_CLK_SHIFT 11
+ #define SPEAR1310_UART1_CLK_SHIFT 10
+ #define SPEAR1310_PCI_CLK_MASK 1
+ #define SPEAR1310_PCI_CLK_SHIFT 0
+
+#define SPEAR1310_RAS_CTRL_REG1 (VA_SPEAR1310_RAS_BASE + 0x004)
+ #define SPEAR1310_PHY_CLK_MASK 0x3
+ #define SPEAR1310_RMII_PHY_CLK_SHIFT 0
+ #define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT 2
+
+#define SPEAR1310_RAS_SW_CLK_CTRL (VA_SPEAR1310_RAS_BASE + 0x0148)
+ #define SPEAR1310_CAN1_CLK_ENB 25
+ #define SPEAR1310_CAN0_CLK_ENB 24
+ #define SPEAR1310_GPT64_CLK_ENB 23
+ #define SPEAR1310_SSP1_CLK_ENB 22
+ #define SPEAR1310_I2C7_CLK_ENB 21
+ #define SPEAR1310_I2C6_CLK_ENB 20
+ #define SPEAR1310_I2C5_CLK_ENB 19
+ #define SPEAR1310_I2C4_CLK_ENB 18
+ #define SPEAR1310_I2C3_CLK_ENB 17
+ #define SPEAR1310_I2C2_CLK_ENB 16
+ #define SPEAR1310_I2C1_CLK_ENB 15
+ #define SPEAR1310_UART5_CLK_ENB 14
+ #define SPEAR1310_UART4_CLK_ENB 13
+ #define SPEAR1310_UART3_CLK_ENB 12
+ #define SPEAR1310_UART2_CLK_ENB 11
+ #define SPEAR1310_UART1_CLK_ENB 10
+ #define SPEAR1310_RS485_1_CLK_ENB 9
+ #define SPEAR1310_RS485_0_CLK_ENB 8
+ #define SPEAR1310_TDM2_CLK_ENB 7
+ #define SPEAR1310_TDM1_CLK_ENB 6
+ #define SPEAR1310_PCI_CLK_ENB 5
+ #define SPEAR1310_GMII_CLK_ENB 4
+ #define SPEAR1310_MII2_CLK_ENB 3
+ #define SPEAR1310_MII1_CLK_ENB 2
+ #define SPEAR1310_MII0_CLK_ENB 1
+ #define SPEAR1310_ESRAM_CLK_ENB 0
+
+static DEFINE_SPINLOCK(_lock);
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ /* PCLK 24MHz */
+ {.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
+ {.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
+ {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/* vco-pll4 rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll4_rtbl[] = {
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
+ {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For VCO1div2 = 500 MHz */
+ {.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
+ {.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
+ {.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
+ {.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+};
+
+/* gmac rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl gmac_rtbl[] = {
+ /* For gmac phy input clk */
+ {.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
+ {.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
+};
+
+/* clcd rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl clcd_rtbl[] = {
+ {.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
+ {.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+ {.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
+ {.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
+};
+
+/* i2s prescaler1 masks */
+static struct aux_clk_masks i2s_prs1_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_X_MASK,
+ .xscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_X_SHIFT,
+ .yscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_Y_MASK,
+ .yscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_Y_SHIFT,
+};
+
+/* i2s sclk (bit clock) syynthesizers masks */
+static struct aux_clk_masks i2s_sclk_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = SPEAR1310_I2S_SCLK_X_MASK,
+ .xscale_sel_shift = SPEAR1310_I2S_SCLK_X_SHIFT,
+ .yscale_sel_mask = SPEAR1310_I2S_SCLK_Y_MASK,
+ .yscale_sel_shift = SPEAR1310_I2S_SCLK_Y_SHIFT,
+ .enable_bit = SPEAR1310_I2S_SCLK_SYNTH_ENB,
+};
+
+/* i2s prs1 aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_prs1_rtbl[] = {
+ /* For parent clk = 49.152 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */
+};
+
+/* i2s sclk aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_sclk_rtbl[] = {
+ /* For i2s_ref_clk = 12.288MHz */
+ {.xscale = 1, .yscale = 4, .eq = 0}, /* 1.53 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 0}, /* 3.07 Mhz */
+};
+
+/* adc rate configuration table, in ascending order of rates */
+/* possible adc range is 2.5 MHz to 20 MHz. */
+static struct aux_rate_tbl adc_rtbl[] = {
+ /* For ahb = 166.67 MHz */
+ {.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
+ {.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
+ {.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
+ {.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
+};
+
+/* General synth rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl gen_rtbl[] = {
+ /* For vco1div4 = 250 MHz */
+ {.div = 0x14000}, /* 25 MHz */
+ {.div = 0x0A000}, /* 50 MHz */
+ {.div = 0x05000}, /* 100 MHz */
+ {.div = 0x02000}, /* 250 MHz */
+};
+
+/* clock parents */
+static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
+static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
+static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
+static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+ "osc_25m_clk", };
+static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
+ "gmac_phy_synth_gate_clk", };
+static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk",
+ "i2s_src_pad_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
+ "pll3_clk", };
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+ "pll2_clk", };
+static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none",
+ "ras_pll2_clk", "ras_synth0_clk", };
+static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk",
+ "ras_pll2_clk", "ras_synth0_clk", };
+static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", };
+static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", };
+static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk",
+ "ras_plclk0_clk", };
+static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", };
+static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", };
+
+void __init spear1310_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
+ 25000000);
+ clk_register_clkdev(clk, "osc_25m_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
+ CLK_IS_ROOT, 125000000);
+ clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
+ CLK_IS_ROOT, 12288000);
+ clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+ /* clock derived from 24 or 25 MHz osc clk */
+ /* vco-pll */
+ clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "vco1_mux_clk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+ 0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "vco2_mux_clk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+ 0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "vco3_mux_clk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+ 0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco3_clk", NULL);
+ clk_register_clkdev(clk1, "pll3_clk", NULL);
+
+ clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk",
+ 0, SPEAR1310_PLL4_CTR, SPEAR1310_PLL4_FRQ, pll4_rtbl,
+ ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco4_clk", NULL);
+ clk_register_clkdev(clk1, "pll4_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll5_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
+ 25000000);
+ clk_register_clkdev(clk, "pll6_clk", NULL);
+
+ /* vco div n clocks */
+ clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "vco1div2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
+ 4);
+ clk_register_clkdev(clk, "vco1div4_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "vco2div2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "vco3div2_clk", NULL);
+
+ /* peripherals */
+ clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
+ 128);
+ clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_thermal");
+
+ /* clock derived from pll4 clk */
+ clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, NULL, "ec800620.wdt");
+
+ clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1,
+ 6);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "pll1_clk", 0, 1,
+ 12);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ /* gpt clocks */
+ clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+ SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+ SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+ SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+ SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt3");
+
+ /* others */
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+ SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0000000.serial");
+
+ clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b3000000.sdhci");
+
+ clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b2800000.cf");
+ clk_register_clkdev(clk, NULL, "arasan_xd");
+
+ clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_synth_clk", NULL);
+ clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+ SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "c3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "c3");
+
+ /* gmac */
+ clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
+ gmac_phy_input_parents,
+ ARRAY_SIZE(gmac_phy_input_parents), 0,
+ SPEAR1310_GMAC_CLK_CFG,
+ SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT,
+ SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+
+ clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
+ "gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT,
+ NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ ARRAY_SIZE(gmac_phy_parents), 0,
+ SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
+ SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "stmmacphy.0");
+
+ /* clcd */
+ clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ ARRAY_SIZE(clcd_synth_parents), 0,
+ SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT,
+ SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+
+ clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl,
+ ARRAY_SIZE(clcd_rtbl), &_lock);
+ clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ ARRAY_SIZE(clcd_pixel_parents), 0,
+ SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
+ SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "clcd_clk", NULL);
+
+ /* i2s */
+ clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
+ SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "i2s_src_clk", NULL);
+
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+ ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
+ clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
+
+ clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
+ SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
+
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+ "i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
+ &i2s_sclk_masks, i2s_sclk_rtbl,
+ ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+
+ /* clock derived from ahb clk */
+ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2C0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0280000.i2c");
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_DMA_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "ea800000.dma");
+ clk_register_clkdev(clk, NULL, "eb000000.dma");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_JPEG_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b2000000.jpeg");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GMAC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e2000000.eth");
+
+ clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_FSMC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b0000000.flash");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SMI_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "ea000000.flash");
+
+ clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+ clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "uoc");
+
+ clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "dw_pcie.0");
+ clk_register_clkdev(clk, NULL, "ahci.0");
+
+ clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "dw_pcie.1");
+ clk_register_clkdev(clk, NULL, "ahci.1");
+
+ clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "dw_pcie.2");
+ clk_register_clkdev(clk, NULL, "ahci.2");
+
+ clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "sysram0_clk", NULL);
+
+ clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "sysram1_clk", NULL);
+
+ clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ 0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl,
+ ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "adc_synth_clk", NULL);
+ clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "adc_clk");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SSP_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0100000.spi");
+
+ clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0600000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0680000.gpio");
+
+ clk = clk_register_gate(NULL, "i2s0_clk", "apb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0180000.i2s");
+
+ clk = clk_register_gate(NULL, "i2s1_clk", "apb_clk", 0,
+ SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0200000.i2s");
+
+ clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
+ SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_KBD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0300000.kbd");
+
+ /* RAS clks */
+ clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
+ gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
+ 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
+ SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
+ gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
+ 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
+ SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+
+ clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+
+ clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+
+ clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+
+ clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_osc_24m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_osc_25m_clk", "osc_25m_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_25M_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_osc_25m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_osc_32k_clk", "osc_32k_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_32K_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_osc_32k_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_pll3_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_tx125_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "ras_30m_fixed_clk", "pll5_clk", 0,
+ 30000000);
+ clk = clk_register_gate(NULL, "ras_30m_clk", "ras_30m_fixed_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_C30M_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_30m_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "ras_48m_fixed_clk", "pll5_clk", 0,
+ 48000000);
+ clk = clk_register_gate(NULL, "ras_48m_clk", "ras_48m_fixed_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_C48M_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_48m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_ACLK_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0,
+ SPEAR1310_RAS_CLK_ENB, SPEAR1310_PCLK_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "ras_plclk0_clk", NULL, CLK_IS_ROOT,
+ 50000000);
+
+ clk = clk_register_fixed_rate(NULL, "ras_tx50_clk", NULL, CLK_IS_ROOT,
+ 50000000);
+
+ clk = clk_register_gate(NULL, "can0_clk", "apb_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+ clk = clk_register_gate(NULL, "can1_clk", "apb_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+ clk = clk_register_gate(NULL, "ras_smii0_clk", "ras_ahb_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5c400000.eth");
+
+ clk = clk_register_gate(NULL, "ras_smii1_clk", "ras_ahb_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5c500000.eth");
+
+ clk = clk_register_gate(NULL, "ras_smii2_clk", "ras_ahb_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5c600000.eth");
+
+ clk = clk_register_gate(NULL, "ras_rgmii_clk", "ras_ahb_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_GMII_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5c700000.eth");
+
+ clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk",
+ smii_rgmii_phy_parents,
+ ARRAY_SIZE(smii_rgmii_phy_parents), 0,
+ SPEAR1310_RAS_CTRL_REG1,
+ SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT,
+ SPEAR1310_PHY_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "stmmacphy.1");
+ clk_register_clkdev(clk, NULL, "stmmacphy.2");
+ clk_register_clkdev(clk, NULL, "stmmacphy.4");
+
+ clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents,
+ ARRAY_SIZE(rmii_phy_parents), 0,
+ SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
+ SPEAR1310_PHY_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "stmmacphy.3");
+
+ clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5c800000.serial");
+
+ clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "uart2_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5c900000.serial");
+
+ clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "uart3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5ca00000.serial");
+
+ clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "uart4_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5cb00000.serial");
+
+ clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "uart5_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5cc00000.serial");
+
+ clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5cd00000.i2c");
+
+ clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c2_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5ce00000.i2c");
+
+ clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5cf00000.i2c");
+
+ clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c4_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5d000000.i2c");
+
+ clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c5_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5d100000.i2c");
+
+ clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c6_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5d200000.i2c");
+
+ clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents,
+ ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2c7_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5d300000.i2c");
+
+ clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents,
+ ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ssp1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "5d400000.spi");
+
+ clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents,
+ ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "pci_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "pci");
+
+ clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents,
+ ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "tdm1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "tdm_hdlc.0");
+
+ clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents,
+ ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+ SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "tdm2_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0,
+ SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "tdm_hdlc.1");
+}
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
new file mode 100644
index 0000000..f130919
--- /dev/null
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -0,0 +1,964 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340_clock.c
+ *
+ * SPEAr1340 machine clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include "clk.h"
+
+/* Clock Configuration Registers */
+#define SPEAR1340_SYS_CLK_CTRL (VA_MISC_BASE + 0x200)
+ #define SPEAR1340_HCLK_SRC_SEL_SHIFT 27
+ #define SPEAR1340_HCLK_SRC_SEL_MASK 1
+ #define SPEAR1340_SCLK_SRC_SEL_SHIFT 23
+ #define SPEAR1340_SCLK_SRC_SEL_MASK 3
+
+/* PLL related registers and bit values */
+#define SPEAR1340_PLL_CFG (VA_MISC_BASE + 0x210)
+ /* PLL_CFG bit values */
+ #define SPEAR1340_CLCD_SYNT_CLK_MASK 1
+ #define SPEAR1340_CLCD_SYNT_CLK_SHIFT 31
+ #define SPEAR1340_GEN_SYNT2_3_CLK_SHIFT 29
+ #define SPEAR1340_GEN_SYNT_CLK_MASK 2
+ #define SPEAR1340_GEN_SYNT0_1_CLK_SHIFT 27
+ #define SPEAR1340_PLL_CLK_MASK 2
+ #define SPEAR1340_PLL3_CLK_SHIFT 24
+ #define SPEAR1340_PLL2_CLK_SHIFT 22
+ #define SPEAR1340_PLL1_CLK_SHIFT 20
+
+#define SPEAR1340_PLL1_CTR (VA_MISC_BASE + 0x214)
+#define SPEAR1340_PLL1_FRQ (VA_MISC_BASE + 0x218)
+#define SPEAR1340_PLL2_CTR (VA_MISC_BASE + 0x220)
+#define SPEAR1340_PLL2_FRQ (VA_MISC_BASE + 0x224)
+#define SPEAR1340_PLL3_CTR (VA_MISC_BASE + 0x22C)
+#define SPEAR1340_PLL3_FRQ (VA_MISC_BASE + 0x230)
+#define SPEAR1340_PLL4_CTR (VA_MISC_BASE + 0x238)
+#define SPEAR1340_PLL4_FRQ (VA_MISC_BASE + 0x23C)
+#define SPEAR1340_PERIP_CLK_CFG (VA_MISC_BASE + 0x244)
+ /* PERIP_CLK_CFG bit values */
+ #define SPEAR1340_SPDIF_CLK_MASK 1
+ #define SPEAR1340_SPDIF_OUT_CLK_SHIFT 15
+ #define SPEAR1340_SPDIF_IN_CLK_SHIFT 14
+ #define SPEAR1340_GPT3_CLK_SHIFT 13
+ #define SPEAR1340_GPT2_CLK_SHIFT 12
+ #define SPEAR1340_GPT_CLK_MASK 1
+ #define SPEAR1340_GPT1_CLK_SHIFT 9
+ #define SPEAR1340_GPT0_CLK_SHIFT 8
+ #define SPEAR1340_UART_CLK_MASK 2
+ #define SPEAR1340_UART1_CLK_SHIFT 6
+ #define SPEAR1340_UART0_CLK_SHIFT 4
+ #define SPEAR1340_CLCD_CLK_MASK 2
+ #define SPEAR1340_CLCD_CLK_SHIFT 2
+ #define SPEAR1340_C3_CLK_MASK 1
+ #define SPEAR1340_C3_CLK_SHIFT 1
+
+#define SPEAR1340_GMAC_CLK_CFG (VA_MISC_BASE + 0x248)
+ #define SPEAR1340_GMAC_PHY_CLK_MASK 1
+ #define SPEAR1340_GMAC_PHY_CLK_SHIFT 2
+ #define SPEAR1340_GMAC_PHY_INPUT_CLK_MASK 2
+ #define SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT 0
+
+#define SPEAR1340_I2S_CLK_CFG (VA_MISC_BASE + 0x24C)
+ /* I2S_CLK_CFG register mask */
+ #define SPEAR1340_I2S_SCLK_X_MASK 0x1F
+ #define SPEAR1340_I2S_SCLK_X_SHIFT 27
+ #define SPEAR1340_I2S_SCLK_Y_MASK 0x1F
+ #define SPEAR1340_I2S_SCLK_Y_SHIFT 22
+ #define SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT 21
+ #define SPEAR1340_I2S_SCLK_SYNTH_ENB 20
+ #define SPEAR1340_I2S_PRS1_CLK_X_MASK 0xFF
+ #define SPEAR1340_I2S_PRS1_CLK_X_SHIFT 12
+ #define SPEAR1340_I2S_PRS1_CLK_Y_MASK 0xFF
+ #define SPEAR1340_I2S_PRS1_CLK_Y_SHIFT 4
+ #define SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT 3
+ #define SPEAR1340_I2S_REF_SEL_MASK 1
+ #define SPEAR1340_I2S_REF_SHIFT 2
+ #define SPEAR1340_I2S_SRC_CLK_MASK 2
+ #define SPEAR1340_I2S_SRC_CLK_SHIFT 0
+
+#define SPEAR1340_C3_CLK_SYNT (VA_MISC_BASE + 0x250)
+#define SPEAR1340_UART0_CLK_SYNT (VA_MISC_BASE + 0x254)
+#define SPEAR1340_UART1_CLK_SYNT (VA_MISC_BASE + 0x258)
+#define SPEAR1340_GMAC_CLK_SYNT (VA_MISC_BASE + 0x25C)
+#define SPEAR1340_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x260)
+#define SPEAR1340_CFXD_CLK_SYNT (VA_MISC_BASE + 0x264)
+#define SPEAR1340_ADC_CLK_SYNT (VA_MISC_BASE + 0x270)
+#define SPEAR1340_AMBA_CLK_SYNT (VA_MISC_BASE + 0x274)
+#define SPEAR1340_CLCD_CLK_SYNT (VA_MISC_BASE + 0x27C)
+#define SPEAR1340_SYS_CLK_SYNT (VA_MISC_BASE + 0x284)
+#define SPEAR1340_GEN_CLK_SYNT0 (VA_MISC_BASE + 0x28C)
+#define SPEAR1340_GEN_CLK_SYNT1 (VA_MISC_BASE + 0x294)
+#define SPEAR1340_GEN_CLK_SYNT2 (VA_MISC_BASE + 0x29C)
+#define SPEAR1340_GEN_CLK_SYNT3 (VA_MISC_BASE + 0x304)
+#define SPEAR1340_PERIP1_CLK_ENB (VA_MISC_BASE + 0x30C)
+ #define SPEAR1340_RTC_CLK_ENB 31
+ #define SPEAR1340_ADC_CLK_ENB 30
+ #define SPEAR1340_C3_CLK_ENB 29
+ #define SPEAR1340_CLCD_CLK_ENB 27
+ #define SPEAR1340_DMA_CLK_ENB 25
+ #define SPEAR1340_GPIO1_CLK_ENB 24
+ #define SPEAR1340_GPIO0_CLK_ENB 23
+ #define SPEAR1340_GPT1_CLK_ENB 22
+ #define SPEAR1340_GPT0_CLK_ENB 21
+ #define SPEAR1340_I2S_PLAY_CLK_ENB 20
+ #define SPEAR1340_I2S_REC_CLK_ENB 19
+ #define SPEAR1340_I2C0_CLK_ENB 18
+ #define SPEAR1340_SSP_CLK_ENB 17
+ #define SPEAR1340_UART0_CLK_ENB 15
+ #define SPEAR1340_PCIE_SATA_CLK_ENB 12
+ #define SPEAR1340_UOC_CLK_ENB 11
+ #define SPEAR1340_UHC1_CLK_ENB 10
+ #define SPEAR1340_UHC0_CLK_ENB 9
+ #define SPEAR1340_GMAC_CLK_ENB 8
+ #define SPEAR1340_CFXD_CLK_ENB 7
+ #define SPEAR1340_SDHCI_CLK_ENB 6
+ #define SPEAR1340_SMI_CLK_ENB 5
+ #define SPEAR1340_FSMC_CLK_ENB 4
+ #define SPEAR1340_SYSRAM0_CLK_ENB 3
+ #define SPEAR1340_SYSRAM1_CLK_ENB 2
+ #define SPEAR1340_SYSROM_CLK_ENB 1
+ #define SPEAR1340_BUS_CLK_ENB 0
+
+#define SPEAR1340_PERIP2_CLK_ENB (VA_MISC_BASE + 0x310)
+ #define SPEAR1340_THSENS_CLK_ENB 8
+ #define SPEAR1340_I2S_REF_PAD_CLK_ENB 7
+ #define SPEAR1340_ACP_CLK_ENB 6
+ #define SPEAR1340_GPT3_CLK_ENB 5
+ #define SPEAR1340_GPT2_CLK_ENB 4
+ #define SPEAR1340_KBD_CLK_ENB 3
+ #define SPEAR1340_CPU_DBG_CLK_ENB 2
+ #define SPEAR1340_DDR_CORE_CLK_ENB 1
+ #define SPEAR1340_DDR_CTRL_CLK_ENB 0
+
+#define SPEAR1340_PERIP3_CLK_ENB (VA_MISC_BASE + 0x314)
+ #define SPEAR1340_PLGPIO_CLK_ENB 18
+ #define SPEAR1340_VIDEO_DEC_CLK_ENB 16
+ #define SPEAR1340_VIDEO_ENC_CLK_ENB 15
+ #define SPEAR1340_SPDIF_OUT_CLK_ENB 13
+ #define SPEAR1340_SPDIF_IN_CLK_ENB 12
+ #define SPEAR1340_VIDEO_IN_CLK_ENB 11
+ #define SPEAR1340_CAM0_CLK_ENB 10
+ #define SPEAR1340_CAM1_CLK_ENB 9
+ #define SPEAR1340_CAM2_CLK_ENB 8
+ #define SPEAR1340_CAM3_CLK_ENB 7
+ #define SPEAR1340_MALI_CLK_ENB 6
+ #define SPEAR1340_CEC0_CLK_ENB 5
+ #define SPEAR1340_CEC1_CLK_ENB 4
+ #define SPEAR1340_PWM_CLK_ENB 3
+ #define SPEAR1340_I2C1_CLK_ENB 2
+ #define SPEAR1340_UART1_CLK_ENB 1
+
+static DEFINE_SPINLOCK(_lock);
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ /* PCLK 24MHz */
+ {.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
+ {.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
+ {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+ {.mode = 0, .m = 0x96, .n = 0x06, .p = 0x0}, /* vco 1200, pll 1200 MHz */
+};
+
+/* vco-pll4 rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll4_rtbl[] = {
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
+ {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
+ {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/*
+ * All below entries generate 166 MHz for
+ * different values of vco1div2
+ */
+static struct frac_rate_tbl amba_synth_rtbl[] = {
+ {.div = 0x06062}, /* for vco1div2 = 500 MHz */
+ {.div = 0x04D1B}, /* for vco1div2 = 400 MHz */
+ {.div = 0x04000}, /* for vco1div2 = 332 MHz */
+ {.div = 0x03031}, /* for vco1div2 = 250 MHz */
+ {.div = 0x0268D}, /* for vco1div2 = 200 MHz */
+};
+
+/*
+ * Synthesizer Clock derived from vcodiv2. This clock is one of the
+ * possible clocks to feed cpu directly.
+ * We can program this synthesizer to make cpu run on different clock
+ * frequencies.
+ * Following table provides configuration values to let cpu run on 200,
+ * 250, 332, 400 or 500 MHz considering different possibilites of input
+ * (vco1div2) clock.
+ *
+ * --------------------------------------------------------------------
+ * vco1div2(Mhz) fout(Mhz) cpuclk = fout/2 div
+ * --------------------------------------------------------------------
+ * 400 200 100 0x04000
+ * 400 250 125 0x03333
+ * 400 332 166 0x0268D
+ * 400 400 200 0x02000
+ * --------------------------------------------------------------------
+ * 500 200 100 0x05000
+ * 500 250 125 0x04000
+ * 500 332 166 0x03031
+ * 500 400 200 0x02800
+ * 500 500 250 0x02000
+ * --------------------------------------------------------------------
+ * 664 200 100 0x06a38
+ * 664 250 125 0x054FD
+ * 664 332 166 0x04000
+ * 664 400 200 0x0351E
+ * 664 500 250 0x02A7E
+ * --------------------------------------------------------------------
+ * 800 200 100 0x08000
+ * 800 250 125 0x06666
+ * 800 332 166 0x04D18
+ * 800 400 200 0x04000
+ * 800 500 250 0x03333
+ * --------------------------------------------------------------------
+ * sys rate configuration table is in descending order of divisor.
+ */
+static struct frac_rate_tbl sys_synth_rtbl[] = {
+ {.div = 0x08000},
+ {.div = 0x06a38},
+ {.div = 0x06666},
+ {.div = 0x054FD},
+ {.div = 0x05000},
+ {.div = 0x04D18},
+ {.div = 0x04000},
+ {.div = 0x0351E},
+ {.div = 0x03333},
+ {.div = 0x03031},
+ {.div = 0x02A7E},
+ {.div = 0x02800},
+ {.div = 0x0268D},
+ {.div = 0x02000},
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For VCO1div2 = 500 MHz */
+ {.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
+ {.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
+ {.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
+ {.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+};
+
+/* gmac rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl gmac_rtbl[] = {
+ /* For gmac phy input clk */
+ {.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
+ {.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
+};
+
+/* clcd rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl clcd_rtbl[] = {
+ {.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
+ {.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+ {.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
+ {.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/
+ {.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/
+};
+
+/* i2s prescaler1 masks */
+static struct aux_clk_masks i2s_prs1_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_X_MASK,
+ .xscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_X_SHIFT,
+ .yscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_Y_MASK,
+ .yscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_Y_SHIFT,
+};
+
+/* i2s sclk (bit clock) syynthesizers masks */
+static struct aux_clk_masks i2s_sclk_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = SPEAR1340_I2S_SCLK_X_MASK,
+ .xscale_sel_shift = SPEAR1340_I2S_SCLK_X_SHIFT,
+ .yscale_sel_mask = SPEAR1340_I2S_SCLK_Y_MASK,
+ .yscale_sel_shift = SPEAR1340_I2S_SCLK_Y_SHIFT,
+ .enable_bit = SPEAR1340_I2S_SCLK_SYNTH_ENB,
+};
+
+/* i2s prs1 aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_prs1_rtbl[] = {
+ /* For parent clk = 49.152 MHz */
+ {.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
+ {.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
+ {.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
+ {.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
+
+ /*
+ * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
+ * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
+ */
+ {.xscale = 1, .yscale = 3, .eq = 0},
+
+ /* For parent clk = 49.152 MHz */
+ {.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
+ {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz, smp freq = 48Khz*/
+};
+
+/* i2s sclk aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_sclk_rtbl[] = {
+ /* For sclk = ref_clk * x/2/y */
+ {.xscale = 1, .yscale = 4, .eq = 0},
+ {.xscale = 1, .yscale = 2, .eq = 0},
+};
+
+/* adc rate configuration table, in ascending order of rates */
+/* possible adc range is 2.5 MHz to 20 MHz. */
+static struct aux_rate_tbl adc_rtbl[] = {
+ /* For ahb = 166.67 MHz */
+ {.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
+ {.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
+ {.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
+ {.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
+};
+
+/* General synth rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl gen_rtbl[] = {
+ /* For vco1div4 = 250 MHz */
+ {.div = 0x1624E}, /* 22.5792 MHz */
+ {.div = 0x14585}, /* 24.576 MHz */
+ {.div = 0x14000}, /* 25 MHz */
+ {.div = 0x0B127}, /* 45.1584 MHz */
+ {.div = 0x0A000}, /* 50 MHz */
+ {.div = 0x061A8}, /* 81.92 MHz */
+ {.div = 0x05000}, /* 100 MHz */
+ {.div = 0x02800}, /* 200 MHz */
+ {.div = 0x02620}, /* 210 MHz */
+ {.div = 0x02460}, /* 220 MHz */
+ {.div = 0x022C0}, /* 230 MHz */
+ {.div = 0x02160}, /* 240 MHz */
+ {.div = 0x02000}, /* 250 MHz */
+};
+
+/* clock parents */
+static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
+static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
+ "sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
+static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
+static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
+static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
+ "uart0_synth_gate_clk", };
+static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
+ "uart1_synth_gate_clk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
+static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+ "osc_25m_clk", };
+static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
+ "gmac_phy_synth_gate_clk", };
+static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
+ "i2s_src_pad_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
+};
+static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
+
+static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
+ "pll3_clk", };
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+ "pll2_clk", };
+
+void __init spear1340_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
+ 25000000);
+ clk_register_clkdev(clk, "osc_25m_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
+ CLK_IS_ROOT, 125000000);
+ clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
+ CLK_IS_ROOT, 12288000);
+ clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+ /* clock derived from 24 or 25 MHz osc clk */
+ /* vco-pll */
+ clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "vco1_mux_clk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+ 0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "vco2_mux_clk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+ 0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "vco3_mux_clk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+ 0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco3_clk", NULL);
+ clk_register_clkdev(clk1, "pll3_clk", NULL);
+
+ clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk",
+ 0, SPEAR1340_PLL4_CTR, SPEAR1340_PLL4_FRQ, pll4_rtbl,
+ ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco4_clk", NULL);
+ clk_register_clkdev(clk1, "pll4_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll5_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
+ 25000000);
+ clk_register_clkdev(clk, "pll6_clk", NULL);
+
+ /* vco div n clocks */
+ clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "vco1div2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
+ 4);
+ clk_register_clkdev(clk, "vco1div4_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "vco2div2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "vco3div2_clk", NULL);
+
+ /* peripherals */
+ clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
+ 128);
+ clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_thermal");
+
+ /* clock derived from pll4 clk */
+ clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
+ SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
+ ARRAY_SIZE(sys_synth_rtbl), &_lock);
+ clk_register_clkdev(clk, "sys_synth_clk", NULL);
+
+ clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
+ SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
+ ARRAY_SIZE(amba_synth_rtbl), &_lock);
+ clk_register_clkdev(clk, "amba_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
+ ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
+ SPEAR1340_SCLK_SRC_SEL_SHIFT,
+ SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "sys_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "cpu_div3_clk", "cpu_clk", 0, 1,
+ 3);
+ clk_register_clkdev(clk, "cpu_div3_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, NULL, "ec800620.wdt");
+
+ clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
+ ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL,
+ SPEAR1340_HCLK_SRC_SEL_SHIFT,
+ SPEAR1340_HCLK_SRC_SEL_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
+ 2);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ /* gpt clocks */
+ clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "gpt3");
+
+ /* others */
+ clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart0_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0000000.serial");
+
+ clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart1_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
+ ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b4100000.serial");
+
+ clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b3000000.sdhci");
+
+ clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b2800000.cf");
+ clk_register_clkdev(clk, NULL, "arasan_xd");
+
+ clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
+ "vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
+ aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_synth_clk", NULL);
+ clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+ SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "c3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "c3");
+
+ /* gmac */
+ clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
+ gmac_phy_input_parents,
+ ARRAY_SIZE(gmac_phy_input_parents), 0,
+ SPEAR1340_GMAC_CLK_CFG,
+ SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
+ SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+
+ clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
+ "gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
+ NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ ARRAY_SIZE(gmac_phy_parents), 0,
+ SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
+ SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "stmmacphy.0");
+
+ /* clcd */
+ clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ ARRAY_SIZE(clcd_synth_parents), 0,
+ SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
+ SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+
+ clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
+ ARRAY_SIZE(clcd_rtbl), &_lock);
+ clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ ARRAY_SIZE(clcd_pixel_parents), 0,
+ SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
+ SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "clcd_clk", NULL);
+
+ /* i2s */
+ clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
+ SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
+ 0, &_lock);
+ clk_register_clkdev(clk, "i2s_src_clk", NULL);
+
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+ ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
+ clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
+
+ clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
+ SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
+
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+ "i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
+ &i2s_sclk_masks, i2s_sclk_rtbl,
+ ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+
+ /* clock derived from ahb clk */
+ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0280000.i2c");
+
+ clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b4000000.i2c");
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_DMA_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "ea800000.dma");
+ clk_register_clkdev(clk, NULL, "eb000000.dma");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GMAC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e2000000.eth");
+
+ clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_FSMC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b0000000.flash");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SMI_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "ea000000.flash");
+
+ clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+ clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "uoc");
+
+ clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "dw_pcie");
+ clk_register_clkdev(clk, NULL, "ahci");
+
+ clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "sysram0_clk", NULL);
+
+ clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, "sysram1_clk", NULL);
+
+ clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ 0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
+ ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "adc_synth_clk", NULL);
+ clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "adc_clk");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SSP_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0100000.spi");
+
+ clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0600000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0680000.gpio");
+
+ clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b2400000.i2s");
+
+ clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0,
+ SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "b2000000.i2s");
+
+ clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
+ SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "e0300000.kbd");
+
+ /* RAS clks */
+ clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
+ gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
+ 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
+ SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
+ gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
+ 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
+ SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+
+ clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+
+ clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+
+ clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+
+ clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+ &_lock);
+ clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+
+ clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "mali");
+
+ clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_cec.0");
+
+ clk = clk_register_gate(NULL, "cec1_clk", "ahb_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_cec.1");
+
+ clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
+ ARRAY_SIZE(spdif_out_parents), 0,
+ SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
+ SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "spdif-out");
+
+ clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
+ ARRAY_SIZE(spdif_in_parents), 0,
+ SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
+ SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spdif-in");
+
+ clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
+ SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "acp_clk");
+
+ clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "plgpio");
+
+ clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "video_dec");
+
+ clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
+ 0, &_lock);
+ clk_register_clkdev(clk, NULL, "video_enc");
+
+ clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_vip");
+
+ clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_camif.0");
+
+ clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_camif.1");
+
+ clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_camif.2");
+
+ clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "spear_camif.3");
+
+ clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "pwm");
+}
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
new file mode 100644
index 0000000..440bb3e
--- /dev/null
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -0,0 +1,612 @@
+/*
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL2_CTR (MISC_BASE + 0x014)
+#define PLL2_FRQ (MISC_BASE + 0x018)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+ /* PLL_CLK_CFG register masks */
+ #define MCTR_CLK_SHIFT 28
+ #define MCTR_CLK_MASK 3
+
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+ /* CORE CLK CFG register masks */
+ #define GEN_SYNTH2_3_CLK_SHIFT 18
+ #define GEN_SYNTH2_3_CLK_MASK 1
+
+ #define HCLK_RATIO_SHIFT 10
+ #define HCLK_RATIO_MASK 2
+ #define PCLK_RATIO_SHIFT 8
+ #define PCLK_RATIO_MASK 2
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+ /* PERIP_CLK_CFG register masks */
+ #define UART_CLK_SHIFT 4
+ #define UART_CLK_MASK 1
+ #define FIRDA_CLK_SHIFT 5
+ #define FIRDA_CLK_MASK 2
+ #define GPT0_CLK_SHIFT 8
+ #define GPT1_CLK_SHIFT 11
+ #define GPT2_CLK_SHIFT 12
+ #define GPT_CLK_MASK 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+ /* PERIP1_CLK_ENB register masks */
+ #define UART_CLK_ENB 3
+ #define SSP_CLK_ENB 5
+ #define I2C_CLK_ENB 7
+ #define JPEG_CLK_ENB 8
+ #define FIRDA_CLK_ENB 10
+ #define GPT1_CLK_ENB 11
+ #define GPT2_CLK_ENB 12
+ #define ADC_CLK_ENB 15
+ #define RTC_CLK_ENB 17
+ #define GPIO_CLK_ENB 18
+ #define DMA_CLK_ENB 19
+ #define SMI_CLK_ENB 21
+ #define GMAC_CLK_ENB 23
+ #define USBD_CLK_ENB 24
+ #define USBH_CLK_ENB 25
+ #define C3_CLK_ENB 31
+
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+ #define RAS_AHB_CLK_ENB 0
+ #define RAS_PLL1_CLK_ENB 1
+ #define RAS_APB_CLK_ENB 2
+ #define RAS_32K_CLK_ENB 3
+ #define RAS_24M_CLK_ENB 4
+ #define RAS_48M_CLK_ENB 5
+ #define RAS_PLL2_CLK_ENB 7
+ #define RAS_SYNT0_CLK_ENB 8
+ #define RAS_SYNT1_CLK_ENB 9
+ #define RAS_SYNT2_CLK_ENB 10
+ #define RAS_SYNT3_CLK_ENB 11
+
+#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+ #define AMEM_CLK_ENB 0
+
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define GEN0_CLK_SYNT (MISC_BASE + 0x06C)
+#define GEN1_CLK_SYNT (MISC_BASE + 0x070)
+#define GEN2_CLK_SYNT (MISC_BASE + 0x074)
+#define GEN3_CLK_SYNT (MISC_BASE + 0x078)
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
+ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* clock parents */
+static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
+static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+ "pll2_clk", };
+
+#ifdef CONFIG_MACH_SPEAR300
+static void __init spear300_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ 1, 1);
+ clk_register_clkdev(clk, NULL, "60000000.clcd");
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "94000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+ clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a9000000.gpio");
+
+ clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a0000000.kbd");
+}
+#endif
+
+/* array of all spear 310 clock lookups */
+#ifdef CONFIG_MACH_SPEAR310
+static void __init spear310_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "emi", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "44000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "tdm");
+
+ clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2000000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2080000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2100000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2180000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2200000.serial");
+}
+#endif
+
+/* array of all spear 320 clock lookups */
+#ifdef CONFIG_MACH_SPEAR320
+ #define SMII_PCLK_SHIFT 18
+ #define SMII_PCLK_MASK 2
+ #define SMII_PCLK_VAL_PAD 0x0
+ #define SMII_PCLK_VAL_PLL2 0x1
+ #define SMII_PCLK_VAL_SYNTH0 0x2
+ #define SDHCI_PCLK_SHIFT 15
+ #define SDHCI_PCLK_MASK 1
+ #define SDHCI_PCLK_VAL_48M 0x0
+ #define SDHCI_PCLK_VAL_SYNTH3 0x1
+ #define I2S_REF_PCLK_SHIFT 8
+ #define I2S_REF_PCLK_MASK 1
+ #define I2S_REF_PCLK_SYNTH_VAL 0x1
+ #define I2S_REF_PCLK_PLL2_VAL 0x0
+ #define UART1_PCLK_SHIFT 6
+ #define UART1_PCLK_MASK 1
+ #define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0
+ #define SPEAR320_UARTX_PCLK_VAL_APB 0x1
+
+static const char *i2s_ref_parents[] = { "ras_pll2_clk",
+ "ras_gen2_synth_gate_clk", };
+static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
+ "ras_gen3_synth_gate_clk",
+};
+static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
+ "ras_gen0_synth_gate_clk", };
+static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
+};
+
+static void __init spear320_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL,
+ CLK_IS_ROOT, 125000000);
+ clk_register_clkdev(clk, "smii_125m_pad", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ 1, 1);
+ clk_register_clkdev(clk, NULL, "90000000.clcd");
+
+ clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "emi", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "4c000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a7000000.i2c");
+
+ clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "pwm", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a5000000.spi");
+
+ clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a6000000.spi");
+
+ clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+ clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+ clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "i2s");
+
+ clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents,
+ ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG,
+ I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1,
+ 4);
+ clk_register_clkdev(clk, "i2s_sclk", NULL);
+
+ clk = clk_register_mux(NULL, "rs485_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9300000.serial");
+
+ clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents,
+ ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG,
+ SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+ clk = clk_register_mux(NULL, "smii_pclk", smii0_parents,
+ ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG,
+ SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "smii_pclk");
+
+ clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "smii");
+
+ clk = clk_register_mux(NULL, "uart1_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG,
+ UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "a3000000.serial");
+
+ clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a4000000.serial");
+
+ clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9100000.serial");
+
+ clk = clk_register_mux(NULL, "uart4_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9200000.serial");
+
+ clk = clk_register_mux(NULL, "uart5_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "60000000.serial");
+
+ clk = clk_register_mux(NULL, "uart6_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "60100000.serial");
+}
+#endif
+
+void __init spear3xx_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+ PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+ /* clock derived from 24 MHz osc clk */
+ clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "fc880000.wdt");
+
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL,
+ "osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+ "osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+ HCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
+ UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
+ PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+ clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+ "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_synth_clk", NULL);
+ clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+ FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "firda");
+
+ /* gpt clocks */
+ clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
+ ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
+ GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+ ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
+ GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+ GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ /* general synths clocks */
+ clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
+ "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen0_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
+
+ clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
+ "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen1_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+ ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
+ GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+
+ clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
+ "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen2_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+
+ clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
+ "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen3_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+
+ /* clock derived from pll3 clk */
+ clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "usbh_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "designware_udc");
+
+ /* clock derived from ahb clk */
+ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+ 1);
+ clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+ ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+ MCTR_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+ PCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG,
+ AMEM_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "amem_clk", NULL);
+
+ clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ C3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "c3_clk");
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ DMA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ GMAC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "e0800000.eth");
+
+ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ I2C_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0180000.i2c");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ JPEG_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "jpeg");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ SMI_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ ADC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "adc");
+
+ clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0100000.spi");
+
+ /* RAS clk enable */
+ clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB,
+ RAS_AHB_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB,
+ RAS_APB_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0,
+ RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_32k_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0,
+ RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_24m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0,
+ RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+ RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+ RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
+ "gen0_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
+ "gen1_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
+ "gen2_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
+ "gen3_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+
+ if (of_machine_is_compatible("st,spear300"))
+ spear300_clk_init();
+ else if (of_machine_is_compatible("st,spear310"))
+ spear310_clk_init();
+ else if (of_machine_is_compatible("st,spear320"))
+ spear320_clk_init();
+}
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
new file mode 100644
index 0000000..f9a20b3
--- /dev/null
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -0,0 +1,342 @@
+/*
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL2_CTR (MISC_BASE + 0x014)
+#define PLL2_FRQ (MISC_BASE + 0x018)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+ /* PLL_CLK_CFG register masks */
+ #define MCTR_CLK_SHIFT 28
+ #define MCTR_CLK_MASK 3
+
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+ /* CORE CLK CFG register masks */
+ #define HCLK_RATIO_SHIFT 10
+ #define HCLK_RATIO_MASK 2
+ #define PCLK_RATIO_SHIFT 8
+ #define PCLK_RATIO_MASK 2
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+ /* PERIP_CLK_CFG register masks */
+ #define CLCD_CLK_SHIFT 2
+ #define CLCD_CLK_MASK 2
+ #define UART_CLK_SHIFT 4
+ #define UART_CLK_MASK 1
+ #define FIRDA_CLK_SHIFT 5
+ #define FIRDA_CLK_MASK 2
+ #define GPT0_CLK_SHIFT 8
+ #define GPT1_CLK_SHIFT 10
+ #define GPT2_CLK_SHIFT 11
+ #define GPT3_CLK_SHIFT 12
+ #define GPT_CLK_MASK 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+ /* PERIP1_CLK_ENB register masks */
+ #define UART0_CLK_ENB 3
+ #define UART1_CLK_ENB 4
+ #define SSP0_CLK_ENB 5
+ #define SSP1_CLK_ENB 6
+ #define I2C_CLK_ENB 7
+ #define JPEG_CLK_ENB 8
+ #define FSMC_CLK_ENB 9
+ #define FIRDA_CLK_ENB 10
+ #define GPT2_CLK_ENB 11
+ #define GPT3_CLK_ENB 12
+ #define GPIO2_CLK_ENB 13
+ #define SSP2_CLK_ENB 14
+ #define ADC_CLK_ENB 15
+ #define GPT1_CLK_ENB 11
+ #define RTC_CLK_ENB 17
+ #define GPIO1_CLK_ENB 18
+ #define DMA_CLK_ENB 19
+ #define SMI_CLK_ENB 21
+ #define CLCD_CLK_ENB 22
+ #define GMAC_CLK_ENB 23
+ #define USBD_CLK_ENB 24
+ #define USBH0_CLK_ENB 25
+ #define USBH1_CLK_ENB 26
+
+#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+
+/* vco rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */
+ {.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+ "pll2_clk", };
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+void __init spear6xx_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT,
+ 30000000);
+ clk_register_clkdev(clk, "osc_30m_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0,
+ PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "rtc-spear");
+
+ /* clock derived from 30 MHz osc clk */
+ clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
+ 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+ &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+ "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "wdt");
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+ HCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
+ UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "uart_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
+ PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+ clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
+ PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0080000.serial");
+
+ clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+ "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_synth_clk", NULL);
+ clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+ FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "firda");
+
+ clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
+ "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+ ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
+ CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+ PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "clcd");
+
+ /* gpt clocks */
+ clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+ ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+ GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+ ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+ GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+ GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+ ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
+ GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt3");
+
+ /* clock derived from pll3 clk */
+ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "usbh.0_clk");
+
+ clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "usbh.1_clk");
+
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "designware_udc");
+
+ /* clock derived from ahb clk */
+ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+ 1);
+ clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+ ARRAY_SIZE(ddr_parents),
+ 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+ PCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ DMA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+ clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ FSMC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d1800000.flash");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ GMAC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gmac");
+
+ clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ I2C_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0200000.i2c");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ JPEG_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "jpeg");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ SMI_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ ADC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "adc");
+
+ clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "f0100000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d8100000.gpio");
+
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.0");
+
+ clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.1");
+
+ clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.2");
+}
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index e6ecc5f..1cc6b3f 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -16,6 +16,7 @@
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/clk.h>
#include <crypto/internal/hash.h>
#include <crypto/sha.h>
@@ -79,6 +80,7 @@
void __iomem *reg;
void __iomem *sram;
int irq;
+ struct clk *clk;
struct task_struct *queue_th;
/* the lock protects queue and eng_st */
@@ -1053,6 +1055,12 @@
if (ret)
goto err_thread;
+ /* Not all platforms can gate the clock, so it is not
+ an error if the clock does not exists. */
+ cp->clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(cp->clk))
+ clk_prepare_enable(cp->clk);
+
writel(SEC_INT_ACCEL0_DONE, cpg->reg + SEC_ACCEL_INT_MASK);
writel(SEC_CFG_STOP_DIG_ERR, cpg->reg + SEC_ACCEL_CFG);
writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
@@ -1118,6 +1126,12 @@
memset(cp->sram, 0, cp->sram_size);
iounmap(cp->sram);
iounmap(cp->reg);
+
+ if (!IS_ERR(cp->clk)) {
+ clk_disable_unprepare(cp->clk);
+ clk_put(cp->clk);
+ }
+
kfree(cp);
cpg = NULL;
return 0;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ef378b5..aadeb5b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -238,6 +238,7 @@
config MXS_DMA
bool "MXS DMA support"
depends on SOC_IMX23 || SOC_IMX28
+ select STMP_DEVICE
select DMA_ENGINE
help
Support the MXS DMA engine. This engine including APBH-DMA
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index f6e9b57..c64917e 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -71,6 +71,7 @@
#define M2M_CONTROL_TM_SHIFT 13
#define M2M_CONTROL_TM_TX (1 << M2M_CONTROL_TM_SHIFT)
#define M2M_CONTROL_TM_RX (2 << M2M_CONTROL_TM_SHIFT)
+#define M2M_CONTROL_NFBINT BIT(21)
#define M2M_CONTROL_RSS_SHIFT 22
#define M2M_CONTROL_RSS_SSPRX (1 << M2M_CONTROL_RSS_SHIFT)
#define M2M_CONTROL_RSS_SSPTX (2 << M2M_CONTROL_RSS_SHIFT)
@@ -79,7 +80,22 @@
#define M2M_CONTROL_PWSC_SHIFT 25
#define M2M_INTERRUPT 0x0004
-#define M2M_INTERRUPT_DONEINT BIT(1)
+#define M2M_INTERRUPT_MASK 6
+
+#define M2M_STATUS 0x000c
+#define M2M_STATUS_CTL_SHIFT 1
+#define M2M_STATUS_CTL_IDLE (0 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_STALL (1 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_MEMRD (2 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_MEMWR (3 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_BWCWAIT (4 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_CTL_MASK (7 << M2M_STATUS_CTL_SHIFT)
+#define M2M_STATUS_BUF_SHIFT 4
+#define M2M_STATUS_BUF_NO (0 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_BUF_ON (1 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_BUF_NEXT (2 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_BUF_MASK (3 << M2M_STATUS_BUF_SHIFT)
+#define M2M_STATUS_DONE BIT(6)
#define M2M_BCR0 0x0010
#define M2M_BCR1 0x0014
@@ -426,15 +442,6 @@
/*
* M2M DMA implementation
- *
- * For the M2M transfers we don't use NFB at all. This is because it simply
- * doesn't work well with memcpy transfers. When you submit both buffers it is
- * extremely unlikely that you get an NFB interrupt, but it instead reports
- * DONE interrupt and both buffers are already transferred which means that we
- * weren't able to update the next buffer.
- *
- * So for now we "simulate" NFB by just submitting buffer after buffer
- * without double buffering.
*/
static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
@@ -543,6 +550,11 @@
m2m_fill_desc(edmac);
control |= M2M_CONTROL_DONEINT;
+ if (ep93xx_dma_advance_active(edmac)) {
+ m2m_fill_desc(edmac);
+ control |= M2M_CONTROL_NFBINT;
+ }
+
/*
* Now we can finally enable the channel. For M2M channel this must be
* done _after_ the BCRx registers are programmed.
@@ -560,32 +572,89 @@
}
}
+/*
+ * According to EP93xx User's Guide, we should receive DONE interrupt when all
+ * M2M DMA controller transactions complete normally. This is not always the
+ * case - sometimes EP93xx M2M DMA asserts DONE interrupt when the DMA channel
+ * is still running (channel Buffer FSM in DMA_BUF_ON state, and channel
+ * Control FSM in DMA_MEM_RD state, observed at least in IDE-DMA operation).
+ * In effect, disabling the channel when only DONE bit is set could stop
+ * currently running DMA transfer. To avoid this, we use Buffer FSM and
+ * Control FSM to check current state of DMA channel.
+ */
static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac)
{
+ u32 status = readl(edmac->regs + M2M_STATUS);
+ u32 ctl_fsm = status & M2M_STATUS_CTL_MASK;
+ u32 buf_fsm = status & M2M_STATUS_BUF_MASK;
+ bool done = status & M2M_STATUS_DONE;
+ bool last_done;
u32 control;
+ struct ep93xx_dma_desc *desc;
- if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_DONEINT))
+ /* Accept only DONE and NFB interrupts */
+ if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_MASK))
return INTERRUPT_UNKNOWN;
- /* Clear the DONE bit */
- writel(0, edmac->regs + M2M_INTERRUPT);
-
- /* Disable interrupts and the channel */
- control = readl(edmac->regs + M2M_CONTROL);
- control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_ENABLE);
- writel(control, edmac->regs + M2M_CONTROL);
-
- /*
- * Since we only get DONE interrupt we have to find out ourselves
- * whether there still is something to process. So we try to advance
- * the chain an see whether it succeeds.
- */
- if (ep93xx_dma_advance_active(edmac)) {
- edmac->edma->hw_submit(edmac);
- return INTERRUPT_NEXT_BUFFER;
+ if (done) {
+ /* Clear the DONE bit */
+ writel(0, edmac->regs + M2M_INTERRUPT);
}
- return INTERRUPT_DONE;
+ /*
+ * Check whether we are done with descriptors or not. This, together
+ * with DMA channel state, determines action to take in interrupt.
+ */
+ desc = ep93xx_dma_get_active(edmac);
+ last_done = !desc || desc->txd.cookie;
+
+ /*
+ * Use M2M DMA Buffer FSM and Control FSM to check current state of
+ * DMA channel. Using DONE and NFB bits from channel status register
+ * or bits from channel interrupt register is not reliable.
+ */
+ if (!last_done &&
+ (buf_fsm == M2M_STATUS_BUF_NO ||
+ buf_fsm == M2M_STATUS_BUF_ON)) {
+ /*
+ * Two buffers are ready for update when Buffer FSM is in
+ * DMA_NO_BUF state. Only one buffer can be prepared without
+ * disabling the channel or polling the DONE bit.
+ * To simplify things, always prepare only one buffer.
+ */
+ if (ep93xx_dma_advance_active(edmac)) {
+ m2m_fill_desc(edmac);
+ if (done && !edmac->chan.private) {
+ /* Software trigger for memcpy channel */
+ control = readl(edmac->regs + M2M_CONTROL);
+ control |= M2M_CONTROL_START;
+ writel(control, edmac->regs + M2M_CONTROL);
+ }
+ return INTERRUPT_NEXT_BUFFER;
+ } else {
+ last_done = true;
+ }
+ }
+
+ /*
+ * Disable the channel only when Buffer FSM is in DMA_NO_BUF state
+ * and Control FSM is in DMA_STALL state.
+ */
+ if (last_done &&
+ buf_fsm == M2M_STATUS_BUF_NO &&
+ ctl_fsm == M2M_STATUS_CTL_STALL) {
+ /* Disable interrupts and the channel */
+ control = readl(edmac->regs + M2M_CONTROL);
+ control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_NFBINT
+ | M2M_CONTROL_ENABLE);
+ writel(control, edmac->regs + M2M_CONTROL);
+ return INTERRUPT_DONE;
+ }
+
+ /*
+ * Nothing to do this time.
+ */
+ return INTERRUPT_NEXT_BUFFER;
}
/*
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index a472a29..fb4f499 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -323,7 +323,8 @@
struct sdma_context_data *context;
dma_addr_t context_phys;
struct dma_device dma_device;
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
spinlock_t channel_0_lock;
struct sdma_script_start_addrs *script_addrs;
};
@@ -867,7 +868,8 @@
sdmac->peripheral_type = data->peripheral_type;
sdmac->event_id0 = data->dma_request;
- clk_enable(sdmac->sdma->clk);
+ clk_enable(sdmac->sdma->clk_ipg);
+ clk_enable(sdmac->sdma->clk_ahb);
ret = sdma_request_channel(sdmac);
if (ret)
@@ -904,7 +906,8 @@
dma_free_coherent(NULL, PAGE_SIZE, sdmac->bd, sdmac->bd_phys);
- clk_disable(sdma->clk);
+ clk_disable(sdma->clk_ipg);
+ clk_disable(sdma->clk_ahb);
}
static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
@@ -1177,12 +1180,14 @@
addr = (void *)header + header->script_addrs_start;
ram_code = (void *)header + header->ram_code_start;
- clk_enable(sdma->clk);
+ clk_enable(sdma->clk_ipg);
+ clk_enable(sdma->clk_ahb);
/* download the RAM image for SDMA */
sdma_load_script(sdma, ram_code,
header->ram_code_size,
addr->ram_code_start_addr);
- clk_disable(sdma->clk);
+ clk_disable(sdma->clk_ipg);
+ clk_disable(sdma->clk_ahb);
sdma_add_scripts(sdma, addr);
@@ -1224,7 +1229,8 @@
return -ENODEV;
}
- clk_enable(sdma->clk);
+ clk_enable(sdma->clk_ipg);
+ clk_enable(sdma->clk_ahb);
/* Be sure SDMA has not started yet */
writel_relaxed(0, sdma->regs + SDMA_H_C0PTR);
@@ -1277,12 +1283,14 @@
/* Initializes channel's priorities */
sdma_set_channel_priority(&sdma->channel[0], 7);
- clk_disable(sdma->clk);
+ clk_disable(sdma->clk_ipg);
+ clk_disable(sdma->clk_ahb);
return 0;
err_dma_alloc:
- clk_disable(sdma->clk);
+ clk_disable(sdma->clk_ipg);
+ clk_disable(sdma->clk_ahb);
dev_err(sdma->dev, "initialisation failed with %d\n", ret);
return ret;
}
@@ -1321,12 +1329,21 @@
goto err_request_region;
}
- sdma->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(sdma->clk)) {
- ret = PTR_ERR(sdma->clk);
+ sdma->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(sdma->clk_ipg)) {
+ ret = PTR_ERR(sdma->clk_ipg);
goto err_clk;
}
+ sdma->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sdma->clk_ahb)) {
+ ret = PTR_ERR(sdma->clk_ahb);
+ goto err_clk;
+ }
+
+ clk_prepare(sdma->clk_ipg);
+ clk_prepare(sdma->clk_ahb);
+
sdma->regs = ioremap(iores->start, resource_size(iores));
if (!sdma->regs) {
ret = -ENOMEM;
@@ -1436,7 +1453,6 @@
err_request_irq:
iounmap(sdma->regs);
err_ioremap:
- clk_put(sdma->clk);
err_clk:
release_mem_region(iores->start, resource_size(iores));
err_request_region:
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 62e3f8e..5ec7204 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1715,7 +1715,7 @@
}
/* Make sure IPU HSP clock is running */
- clk_enable(ipu_data.ipu_clk);
+ clk_prepare_enable(ipu_data.ipu_clk);
/* Disable all interrupts */
idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
@@ -1747,7 +1747,7 @@
err_idmac_init:
err_attach_irq:
ipu_irq_detach_irq(&ipu_data, pdev);
- clk_disable(ipu_data.ipu_clk);
+ clk_disable_unprepare(ipu_data.ipu_clk);
clk_put(ipu_data.ipu_clk);
err_clk_get:
iounmap(ipu_data.reg_ic);
@@ -1765,7 +1765,7 @@
ipu_idmac_exit(ipu);
ipu_irq_detach_irq(ipu, pdev);
- clk_disable(ipu->ipu_clk);
+ clk_disable_unprepare(ipu->ipu_clk);
clk_put(ipu->ipu_clk);
iounmap(ipu->reg_ic);
iounmap(ipu->reg_ipu);
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index fa5d55f..0b12e68 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/memory.h>
+#include <linux/clk.h>
#include <plat/mv_xor.h>
#include "dmaengine.h"
@@ -1307,11 +1308,25 @@
if (dram)
mv_xor_conf_mbus_windows(msp, dram);
+ /* Not all platforms can gate the clock, so it is not
+ * an error if the clock does not exists.
+ */
+ msp->clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(msp->clk))
+ clk_prepare_enable(msp->clk);
+
return 0;
}
static int mv_xor_shared_remove(struct platform_device *pdev)
{
+ struct mv_xor_shared_private *msp = platform_get_drvdata(pdev);
+
+ if (!IS_ERR(msp->clk)) {
+ clk_disable_unprepare(msp->clk);
+ clk_put(msp->clk);
+ }
+
return 0;
}
diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h
index 654876b..a5b422f 100644
--- a/drivers/dma/mv_xor.h
+++ b/drivers/dma/mv_xor.h
@@ -55,6 +55,7 @@
struct mv_xor_shared_private {
void __iomem *xor_base;
void __iomem *xor_high_base;
+ struct clk *clk;
};
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index 3db3a48..c96ab15 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -22,11 +22,14 @@
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/fsl/mxs-dma.h>
+#include <linux/stmp_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/irq.h>
#include <mach/mxs.h>
-#include <mach/common.h>
#include "dmaengine.h"
@@ -36,12 +39,8 @@
* dma can program the controller registers of peripheral devices.
*/
-#define MXS_DMA_APBH 0
-#define MXS_DMA_APBX 1
-#define dma_is_apbh() (mxs_dma->dev_id == MXS_DMA_APBH)
-
-#define APBH_VERSION_LATEST 3
-#define apbh_is_old() (mxs_dma->version < APBH_VERSION_LATEST)
+#define dma_is_apbh(mxs_dma) ((mxs_dma)->type == MXS_DMA_APBH)
+#define apbh_is_old(mxs_dma) ((mxs_dma)->dev_id == IMX23_DMA)
#define HW_APBHX_CTRL0 0x000
#define BM_APBH_CTRL0_APB_BURST8_EN (1 << 29)
@@ -51,13 +50,14 @@
#define HW_APBHX_CTRL2 0x020
#define HW_APBHX_CHANNEL_CTRL 0x030
#define BP_APBHX_CHANNEL_CTRL_RESET_CHANNEL 16
-#define HW_APBH_VERSION (cpu_is_mx23() ? 0x3f0 : 0x800)
-#define HW_APBX_VERSION 0x800
-#define BP_APBHX_VERSION_MAJOR 24
-#define HW_APBHX_CHn_NXTCMDAR(n) \
- (((dma_is_apbh() && apbh_is_old()) ? 0x050 : 0x110) + (n) * 0x70)
-#define HW_APBHX_CHn_SEMA(n) \
- (((dma_is_apbh() && apbh_is_old()) ? 0x080 : 0x140) + (n) * 0x70)
+/*
+ * The offset of NXTCMDAR register is different per both dma type and version,
+ * while stride for each channel is all the same 0x70.
+ */
+#define HW_APBHX_CHn_NXTCMDAR(d, n) \
+ (((dma_is_apbh(d) && apbh_is_old(d)) ? 0x050 : 0x110) + (n) * 0x70)
+#define HW_APBHX_CHn_SEMA(d, n) \
+ (((dma_is_apbh(d) && apbh_is_old(d)) ? 0x080 : 0x140) + (n) * 0x70)
/*
* ccw bits definitions
@@ -121,9 +121,19 @@
#define MXS_DMA_CHANNELS 16
#define MXS_DMA_CHANNELS_MASK 0xffff
+enum mxs_dma_devtype {
+ MXS_DMA_APBH,
+ MXS_DMA_APBX,
+};
+
+enum mxs_dma_id {
+ IMX23_DMA,
+ IMX28_DMA,
+};
+
struct mxs_dma_engine {
- int dev_id;
- unsigned int version;
+ enum mxs_dma_id dev_id;
+ enum mxs_dma_devtype type;
void __iomem *base;
struct clk *clk;
struct dma_device dma_device;
@@ -131,17 +141,86 @@
struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
};
+struct mxs_dma_type {
+ enum mxs_dma_id id;
+ enum mxs_dma_devtype type;
+};
+
+static struct mxs_dma_type mxs_dma_types[] = {
+ {
+ .id = IMX23_DMA,
+ .type = MXS_DMA_APBH,
+ }, {
+ .id = IMX23_DMA,
+ .type = MXS_DMA_APBX,
+ }, {
+ .id = IMX28_DMA,
+ .type = MXS_DMA_APBH,
+ }, {
+ .id = IMX28_DMA,
+ .type = MXS_DMA_APBX,
+ }
+};
+
+static struct platform_device_id mxs_dma_ids[] = {
+ {
+ .name = "imx23-dma-apbh",
+ .driver_data = (kernel_ulong_t) &mxs_dma_types[0],
+ }, {
+ .name = "imx23-dma-apbx",
+ .driver_data = (kernel_ulong_t) &mxs_dma_types[1],
+ }, {
+ .name = "imx28-dma-apbh",
+ .driver_data = (kernel_ulong_t) &mxs_dma_types[2],
+ }, {
+ .name = "imx28-dma-apbx",
+ .driver_data = (kernel_ulong_t) &mxs_dma_types[3],
+ }, {
+ /* end of list */
+ }
+};
+
+static const struct of_device_id mxs_dma_dt_ids[] = {
+ { .compatible = "fsl,imx23-dma-apbh", .data = &mxs_dma_ids[0], },
+ { .compatible = "fsl,imx23-dma-apbx", .data = &mxs_dma_ids[1], },
+ { .compatible = "fsl,imx28-dma-apbh", .data = &mxs_dma_ids[2], },
+ { .compatible = "fsl,imx28-dma-apbx", .data = &mxs_dma_ids[3], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids);
+
+static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan)
+{
+ return container_of(chan, struct mxs_dma_chan, chan);
+}
+
+int mxs_dma_is_apbh(struct dma_chan *chan)
+{
+ struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
+ struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+
+ return dma_is_apbh(mxs_dma);
+}
+
+int mxs_dma_is_apbx(struct dma_chan *chan)
+{
+ struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
+ struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+
+ return !dma_is_apbh(mxs_dma);
+}
+
static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
{
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int chan_id = mxs_chan->chan.chan_id;
- if (dma_is_apbh() && apbh_is_old())
+ if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma))
writel(1 << (chan_id + BP_APBH_CTRL0_RESET_CHANNEL),
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
else
writel(1 << (chan_id + BP_APBHX_CHANNEL_CTRL_RESET_CHANNEL),
- mxs_dma->base + HW_APBHX_CHANNEL_CTRL + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_SET);
}
static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan)
@@ -151,10 +230,10 @@
/* set cmd_addr up */
writel(mxs_chan->ccw_phys,
- mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id));
+ mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(mxs_dma, chan_id));
/* write 1 to SEMA to kick off the channel */
- writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id));
+ writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(mxs_dma, chan_id));
}
static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan)
@@ -168,12 +247,12 @@
int chan_id = mxs_chan->chan.chan_id;
/* freeze the channel */
- if (dma_is_apbh() && apbh_is_old())
+ if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma))
writel(1 << chan_id,
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
else
writel(1 << chan_id,
- mxs_dma->base + HW_APBHX_CHANNEL_CTRL + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_SET);
mxs_chan->status = DMA_PAUSED;
}
@@ -184,21 +263,16 @@
int chan_id = mxs_chan->chan.chan_id;
/* unfreeze the channel */
- if (dma_is_apbh() && apbh_is_old())
+ if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma))
writel(1 << chan_id,
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
+ mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_CLR);
else
writel(1 << chan_id,
- mxs_dma->base + HW_APBHX_CHANNEL_CTRL + MXS_CLR_ADDR);
+ mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_CLR);
mxs_chan->status = DMA_IN_PROGRESS;
}
-static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan)
-{
- return container_of(chan, struct mxs_dma_chan, chan);
-}
-
static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
return dma_cookie_assign(tx);
@@ -220,11 +294,11 @@
/* completion status */
stat1 = readl(mxs_dma->base + HW_APBHX_CTRL1);
stat1 &= MXS_DMA_CHANNELS_MASK;
- writel(stat1, mxs_dma->base + HW_APBHX_CTRL1 + MXS_CLR_ADDR);
+ writel(stat1, mxs_dma->base + HW_APBHX_CTRL1 + STMP_OFFSET_REG_CLR);
/* error status */
stat2 = readl(mxs_dma->base + HW_APBHX_CTRL2);
- writel(stat2, mxs_dma->base + HW_APBHX_CTRL2 + MXS_CLR_ADDR);
+ writel(stat2, mxs_dma->base + HW_APBHX_CTRL2 + STMP_OFFSET_REG_CLR);
/*
* When both completion and error of termination bits set at the
@@ -567,27 +641,21 @@
if (ret)
return ret;
- ret = mxs_reset_block(mxs_dma->base);
+ ret = stmp_reset_block(mxs_dma->base);
if (ret)
goto err_out;
- /* only major version matters */
- mxs_dma->version = readl(mxs_dma->base +
- ((mxs_dma->dev_id == MXS_DMA_APBX) ?
- HW_APBX_VERSION : HW_APBH_VERSION)) >>
- BP_APBHX_VERSION_MAJOR;
-
/* enable apbh burst */
- if (dma_is_apbh()) {
+ if (dma_is_apbh(mxs_dma)) {
writel(BM_APBH_CTRL0_APB_BURST_EN,
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
writel(BM_APBH_CTRL0_APB_BURST8_EN,
- mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
}
/* enable irq for all the channels */
writel(MXS_DMA_CHANNELS_MASK << MXS_DMA_CHANNELS,
- mxs_dma->base + HW_APBHX_CTRL1 + MXS_SET_ADDR);
+ mxs_dma->base + HW_APBHX_CTRL1 + STMP_OFFSET_REG_SET);
err_out:
clk_disable_unprepare(mxs_dma->clk);
@@ -596,8 +664,9 @@
static int __init mxs_dma_probe(struct platform_device *pdev)
{
- const struct platform_device_id *id_entry =
- platform_get_device_id(pdev);
+ const struct platform_device_id *id_entry;
+ const struct of_device_id *of_id;
+ const struct mxs_dma_type *dma_type;
struct mxs_dma_engine *mxs_dma;
struct resource *iores;
int ret, i;
@@ -606,7 +675,15 @@
if (!mxs_dma)
return -ENOMEM;
- mxs_dma->dev_id = id_entry->driver_data;
+ of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev);
+ if (of_id)
+ id_entry = of_id->data;
+ else
+ id_entry = platform_get_device_id(pdev);
+
+ dma_type = (struct mxs_dma_type *)id_entry->driver_data;
+ mxs_dma->type = dma_type->type;
+ mxs_dma->dev_id = dma_type->id;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -689,23 +766,12 @@
return ret;
}
-static struct platform_device_id mxs_dma_type[] = {
- {
- .name = "mxs-dma-apbh",
- .driver_data = MXS_DMA_APBH,
- }, {
- .name = "mxs-dma-apbx",
- .driver_data = MXS_DMA_APBX,
- }, {
- /* end of list */
- }
-};
-
static struct platform_driver mxs_dma_driver = {
.driver = {
.name = "mxs-dma",
+ .of_match_table = mxs_dma_dt_ids,
},
- .id_table = mxs_dma_type,
+ .id_table = mxs_dma_ids,
};
static int __init mxs_dma_module_init(void)
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index b413650..39e4956 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -25,23 +25,25 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/basic_mmio_gpio.h>
#include <linux/module.h>
-#include <mach/mxs.h>
#define MXS_SET 0x4
#define MXS_CLR 0x8
-#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
-#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
-#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
-#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
-#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
-#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
-#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
-#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
+#define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
+#define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
+#define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
+#define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
+#define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
+#define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
+#define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
+#define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
#define GPIO_INT_FALL_EDGE 0x0
#define GPIO_INT_LOW_LEV 0x1
@@ -52,14 +54,30 @@
#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
+enum mxs_gpio_id {
+ IMX23_GPIO,
+ IMX28_GPIO,
+};
+
struct mxs_gpio_port {
void __iomem *base;
int id;
int irq;
int virtual_irq_start;
struct bgpio_chip bgc;
+ enum mxs_gpio_id devid;
};
+static inline int is_imx23_gpio(struct mxs_gpio_port *port)
+{
+ return port->devid == IMX23_GPIO;
+}
+
+static inline int is_imx28_gpio(struct mxs_gpio_port *port)
+{
+ return port->devid == IMX28_GPIO;
+}
+
/* Note: This driver assumes 32 GPIOs are handled in one register */
static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
@@ -89,21 +107,21 @@
}
/* set level or edge */
- pin_addr = port->base + PINCTRL_IRQLEV(port->id);
+ pin_addr = port->base + PINCTRL_IRQLEV(port);
if (edge & GPIO_INT_LEV_MASK)
writel(pin_mask, pin_addr + MXS_SET);
else
writel(pin_mask, pin_addr + MXS_CLR);
/* set polarity */
- pin_addr = port->base + PINCTRL_IRQPOL(port->id);
+ pin_addr = port->base + PINCTRL_IRQPOL(port);
if (edge & GPIO_INT_POL_MASK)
writel(pin_mask, pin_addr + MXS_SET);
else
writel(pin_mask, pin_addr + MXS_CLR);
writel(1 << (gpio & 0x1f),
- port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR);
+ port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
return 0;
}
@@ -117,8 +135,8 @@
desc->irq_data.chip->irq_ack(&desc->irq_data);
- irq_stat = readl(port->base + PINCTRL_IRQSTAT(port->id)) &
- readl(port->base + PINCTRL_IRQEN(port->id));
+ irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
+ readl(port->base + PINCTRL_IRQEN(port));
while (irq_stat != 0) {
int irqoffset = fls(irq_stat) - 1;
@@ -164,8 +182,8 @@
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_set_type = mxs_gpio_set_irq_type;
ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
- ct->regs.ack = PINCTRL_IRQSTAT(port->id) + MXS_CLR;
- ct->regs.mask = PINCTRL_IRQEN(port->id);
+ ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
+ ct->regs.mask = PINCTRL_IRQEN(port);
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
@@ -179,60 +197,83 @@
return port->virtual_irq_start + offset;
}
+static struct platform_device_id mxs_gpio_ids[] = {
+ {
+ .name = "imx23-gpio",
+ .driver_data = IMX23_GPIO,
+ }, {
+ .name = "imx28-gpio",
+ .driver_data = IMX28_GPIO,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
+
+static const struct of_device_id mxs_gpio_dt_ids[] = {
+ { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
+ { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
+
static int __devinit mxs_gpio_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(mxs_gpio_dt_ids, &pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *parent;
static void __iomem *base;
struct mxs_gpio_port *port;
struct resource *iores = NULL;
int err;
- port = kzalloc(sizeof(struct mxs_gpio_port), GFP_KERNEL);
+ port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
if (!port)
return -ENOMEM;
- port->id = pdev->id;
+ if (np) {
+ port->id = of_alias_get_id(np, "gpio");
+ if (port->id < 0)
+ return port->id;
+ port->devid = (enum mxs_gpio_id) of_id->data;
+ } else {
+ port->id = pdev->id;
+ port->devid = pdev->id_entry->driver_data;
+ }
port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32;
+ port->irq = platform_get_irq(pdev, 0);
+ if (port->irq < 0)
+ return port->irq;
+
/*
* map memory region only once, as all the gpio ports
* share the same one
*/
if (!base) {
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iores) {
- err = -ENODEV;
- goto out_kfree;
+ if (np) {
+ parent = of_get_parent(np);
+ base = of_iomap(parent, 0);
+ of_node_put(parent);
+ } else {
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_request_and_ioremap(&pdev->dev, iores);
}
-
- if (!request_mem_region(iores->start, resource_size(iores),
- pdev->name)) {
- err = -EBUSY;
- goto out_kfree;
- }
-
- base = ioremap(iores->start, resource_size(iores));
- if (!base) {
- err = -ENOMEM;
- goto out_release_mem;
- }
+ if (!base)
+ return -EADDRNOTAVAIL;
}
port->base = base;
- port->irq = platform_get_irq(pdev, 0);
- if (port->irq < 0) {
- err = -EINVAL;
- goto out_iounmap;
- }
-
/*
* select the pin interrupt functionality but initially
* disable the interrupts
*/
- writel(~0U, port->base + PINCTRL_PIN2IRQ(port->id));
- writel(0, port->base + PINCTRL_IRQEN(port->id));
+ writel(~0U, port->base + PINCTRL_PIN2IRQ(port));
+ writel(0, port->base + PINCTRL_IRQEN(port));
/* clear address has to be used to clear IRQSTAT bits */
- writel(~0U, port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR);
+ writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
/* gpio-mxs can be a generic irq chip */
mxs_gpio_init_gc(port);
@@ -242,41 +283,32 @@
irq_set_handler_data(port->irq, port);
err = bgpio_init(&port->bgc, &pdev->dev, 4,
- port->base + PINCTRL_DIN(port->id),
- port->base + PINCTRL_DOUT(port->id), NULL,
- port->base + PINCTRL_DOE(port->id), NULL, 0);
+ port->base + PINCTRL_DIN(port),
+ port->base + PINCTRL_DOUT(port), NULL,
+ port->base + PINCTRL_DOE(port), NULL, 0);
if (err)
- goto out_iounmap;
+ return err;
port->bgc.gc.to_irq = mxs_gpio_to_irq;
port->bgc.gc.base = port->id * 32;
err = gpiochip_add(&port->bgc.gc);
- if (err)
- goto out_bgpio_remove;
+ if (err) {
+ bgpio_remove(&port->bgc);
+ return err;
+ }
return 0;
-
-out_bgpio_remove:
- bgpio_remove(&port->bgc);
-out_iounmap:
- if (iores)
- iounmap(port->base);
-out_release_mem:
- if (iores)
- release_mem_region(iores->start, resource_size(iores));
-out_kfree:
- kfree(port);
- dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
- return err;
}
static struct platform_driver mxs_gpio_driver = {
.driver = {
.name = "gpio-mxs",
.owner = THIS_MODULE,
+ .of_match_table = mxs_gpio_dt_ids,
},
.probe = mxs_gpio_probe,
+ .id_table = mxs_gpio_ids,
};
static int __init mxs_gpio_init(void)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 421f6af..7bb0044 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2454,6 +2454,12 @@
},
}, {
.chip = {
+ .base = EXYNOS5_GPC4(0),
+ .ngpio = EXYNOS5_GPIO_C4_NR,
+ .label = "GPC4",
+ },
+ }, {
+ .chip = {
.base = EXYNOS5_GPD0(0),
.ngpio = EXYNOS5_GPIO_D0_NR,
.label = "GPD0",
@@ -2826,8 +2832,11 @@
goto err_ioremap1;
}
+ /* need to set base address for gpc4 */
+ exonys5_gpios_1[11].base = gpio_base1 + 0x2E0;
+
/* need to set base address for gpx */
- chip = &exynos5_gpios_1[20];
+ chip = &exynos5_gpios_1[21];
gpx_base = gpio_base1 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 5f13c62..5a3bb3d 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -49,7 +49,6 @@
config I2C_MUX
tristate "I2C bus multiplexing support"
- depends on EXPERIMENTAL
help
Say Y here if you want the I2C core to support the ability to
handle multiplexed I2C bus topologies, by presenting each
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 94468a6..7244c8b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -445,20 +445,6 @@
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
-config I2C_IXP2000
- tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
- depends on ARCH_IXP2000
- select I2C_ALGOBIT
- help
- Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
- system and are using GPIO lines for an I2C bus.
-
- This support is also available as a module. If so, the module
- will be called i2c-ixp2000.
-
- This driver is deprecated and will be dropped soon. Use i2c-gpio
- instead.
-
config I2C_MPC
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
depends on PPC
@@ -483,6 +469,7 @@
config I2C_MXS
tristate "Freescale i.MX28 I2C interface"
depends on SOC_IMX28
+ select STMP_DEVICE
help
Say Y here if you want to use the I2C bus controller on
the Freescale i.MX28 processors.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 569567b..ce3c2be 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -44,7 +44,6 @@
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
-obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index a76d85f..79b4bcb 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -755,7 +755,7 @@
dev->clk = NULL;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
- free_irq(IRQ_I2C, dev);
+ free_irq(dev->irq, dev);
iounmap(dev->base);
kfree(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index df87992..1e48bec 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -164,9 +164,15 @@
u32 dw_readl(struct dw_i2c_dev *dev, int offset)
{
- u32 value = readl(dev->base + offset);
+ u32 value;
- if (dev->swab)
+ if (dev->accessor_flags & ACCESS_16BIT)
+ value = readw(dev->base + offset) |
+ (readw(dev->base + offset + 2) << 16);
+ else
+ value = readl(dev->base + offset);
+
+ if (dev->accessor_flags & ACCESS_SWAP)
return swab32(value);
else
return value;
@@ -174,10 +180,15 @@
void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
{
- if (dev->swab)
+ if (dev->accessor_flags & ACCESS_SWAP)
b = swab32(b);
- writel(b, dev->base + offset);
+ if (dev->accessor_flags & ACCESS_16BIT) {
+ writew((u16)b, dev->base + offset);
+ writew((u16)(b >> 16), dev->base + offset + 2);
+ } else {
+ writel(b, dev->base + offset);
+ }
}
static u32
@@ -251,14 +262,14 @@
input_clock_khz = dev->get_clk_rate_khz(dev);
- /* Configure register endianess access */
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
- dev->swab = 1;
- reg = DW_IC_COMP_TYPE_VALUE;
- }
-
- if (reg != DW_IC_COMP_TYPE_VALUE) {
+ /* Configure register endianess access */
+ dev->accessor_flags |= ACCESS_SWAP;
+ } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+ /* Configure register access mode 16bit */
+ dev->accessor_flags |= ACCESS_16BIT;
+ } else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 02d1a2d..9c1840e 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -82,7 +82,7 @@
unsigned int status;
u32 abort_source;
int irq;
- int swab;
+ u32 accessor_flags;
struct i2c_adapter adapter;
u32 functionality;
u32 master_cfg;
@@ -90,6 +90,9 @@
unsigned int rx_fifo_depth;
};
+#define ACCESS_SWAP 0x00000001
+#define ACCESS_16BIT 0x00000002
+
extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
extern int i2c_dw_init(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4ba589a..0506fef 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -36,6 +36,7 @@
#include <linux/interrupt.h>
#include <linux/of_i2c.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/io.h>
#include <linux/slab.h>
#include "i2c-designware-core.h"
@@ -95,7 +96,7 @@
r = -ENODEV;
goto err_free_mem;
}
- clk_enable(dev->clk);
+ clk_prepare_enable(dev->clk);
dev->functionality =
I2C_FUNC_I2C |
@@ -155,7 +156,7 @@
err_iounmap:
iounmap(dev->base);
err_unuse_clocks:
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
err_free_mem:
@@ -177,7 +178,7 @@
i2c_del_adapter(&dev->adapter);
put_device(&pdev->dev);
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
@@ -198,6 +199,31 @@
MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
#endif
+#ifdef CONFIG_PM
+static int dw_i2c_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(i_dev->clk);
+
+ return 0;
+}
+
+static int dw_i2c_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+ clk_prepare_enable(i_dev->clk);
+ i2c_dw_init(i_dev);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
+
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
@@ -207,6 +233,7 @@
.name = "i2c_designware",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(dw_i2c_of_match),
+ .pm = &dw_i2c_dev_pm_ops,
},
};
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index c811289b..2f74ae8 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -263,11 +263,6 @@
init_waitqueue_head(&pch_event);
}
-static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
-{
- return cmp1.tv64 < cmp2.tv64;
-}
-
/**
* pch_i2c_wait_for_bus_idle() - check the status of bus.
* @adap: Pointer to struct i2c_algo_pch_data.
@@ -317,33 +312,6 @@
}
/**
- * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event
- * @adap: Pointer to struct i2c_algo_pch_data.
- */
-static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
-{
- long ret;
- ret = wait_event_timeout(pch_event,
- (adap->pch_event_flag != 0), msecs_to_jiffies(1000));
-
- if (ret == 0) {
- pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
- adap->pch_event_flag = 0;
- return -ETIMEDOUT;
- }
-
- if (adap->pch_event_flag & I2C_ERROR_MASK) {
- pch_err(adap, "error bits set: %x\n", adap->pch_event_flag);
- adap->pch_event_flag = 0;
- return -EIO;
- }
-
- adap->pch_event_flag = 0;
-
- return 0;
-}
-
-/**
* pch_i2c_getack() - to confirm ACK/NACK
* @adap: Pointer to struct i2c_algo_pch_data.
*/
@@ -373,6 +341,40 @@
pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
}
+static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
+{
+ long ret;
+
+ ret = wait_event_timeout(pch_event,
+ (adap->pch_event_flag != 0), msecs_to_jiffies(1000));
+ if (!ret) {
+ pch_err(adap, "%s:wait-event timeout\n", __func__);
+ adap->pch_event_flag = 0;
+ pch_i2c_stop(adap);
+ pch_i2c_init(adap);
+ return -ETIMEDOUT;
+ }
+
+ if (adap->pch_event_flag & I2C_ERROR_MASK) {
+ pch_err(adap, "Lost Arbitration\n");
+ adap->pch_event_flag = 0;
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ }
+
+ adap->pch_event_flag = 0;
+
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
/**
* pch_i2c_repstart() - generate repeated start condition in normal mode
* @adap: Pointer to struct i2c_algo_pch_data.
@@ -427,27 +429,12 @@
if (first)
pch_i2c_start(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- addr_8_lsb = (addr & I2C_ADDR_MSK);
- iowrite32(addr_8_lsb, p + PCH_I2CDR);
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ addr_8_lsb = (addr & I2C_ADDR_MSK);
+ iowrite32(addr_8_lsb, p + PCH_I2CDR);
} else {
/* set 7 bit slave address and R/W bit as 0 */
iowrite32(addr << 1, p + PCH_I2CDR);
@@ -455,44 +442,21 @@
pch_i2c_start(adap);
}
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
for (wrcount = 0; wrcount < length; ++wrcount) {
/* write buffer value to I2C data register */
iowrite32(buf[wrcount], p + PCH_I2CDR);
pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMCF_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
}
/* check if this is the last message */
@@ -580,50 +544,21 @@
if (first)
pch_i2c_start(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- addr_8_lsb = (addr & I2C_ADDR_MSK);
- iowrite32(addr_8_lsb, p + PCH_I2CDR);
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ addr_8_lsb = (addr & I2C_ADDR_MSK);
+ iowrite32(addr_8_lsb, p + PCH_I2CDR);
+
pch_i2c_restart(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- addr_2_msb |= I2C_RD;
- iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK,
- p + PCH_I2CDR);
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ addr_2_msb |= I2C_RD;
+ iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
} else {
/* 7 address bits + R/W bit */
addr = (((addr) << 1) | (I2C_RD));
@@ -634,23 +569,9 @@
if (first)
pch_i2c_start(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
if (length == 0) {
pch_i2c_stop(adap);
@@ -669,18 +590,9 @@
if (loop != 1)
read_index++;
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave"
- "address setting\n");
- return -EIO;
- }
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
-
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
} /* end for */
pch_i2c_sendnack(adap);
@@ -690,17 +602,9 @@
if (length != 1)
read_index++;
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave"
- "address setting\n");
- return -EIO;
- }
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
if (last)
pch_i2c_stop(adap);
@@ -790,7 +694,7 @@
ret = mutex_lock_interruptible(&pch_mutex);
if (ret)
- return -ERESTARTSYS;
+ return ret;
if (adap->p_adapter_info->pch_i2c_suspended) {
mutex_unlock(&pch_mutex);
@@ -909,7 +813,7 @@
pch_adap->owner = THIS_MODULE;
pch_adap->class = I2C_CLASS_HWMON;
- strcpy(pch_adap->name, KBUILD_MODNAME);
+ strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name));
pch_adap->algo = &pch_algorithm;
pch_adap->algo_data = &adap_info->pch_data[i];
@@ -963,7 +867,7 @@
pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
for (i = 0; i < adap_info->ch_num; i++)
- adap_info->pch_data[i].pch_base_address = 0;
+ adap_info->pch_data[i].pch_base_address = NULL;
pci_set_drvdata(pdev, NULL);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index c0330a4..e62d2d9 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -190,12 +190,7 @@
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- /*
- * If "dev->id" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
- adap->nr = (pdev->id != -1) ? pdev->id : 0;
+ adap->nr = pdev->id;
ret = i2c_bit_add_numbered_bus(adap);
if (ret)
goto err_add_bus;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 56bce9a..8d6b504 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -512,7 +512,7 @@
}
/* Setup i2c_imx driver structure */
- strcpy(i2c_imx->adapter.name, pdev->name);
+ strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
i2c_imx->adapter.owner = THIS_MODULE;
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
deleted file mode 100644
index 5d263f90..0000000
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-ixp2000.c
- *
- * I2C adapter for IXP2000 systems using GPIOs for I2C bus
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com>
- * Made generic by: Jeff Daly <jeffrey.daly@intel.com>
- *
- * Copyright (c) 2003-2004 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * From Jeff Daly:
- *
- * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any
- * IXP2000 platform if it uses the HW GPIO in the same manner. Basically,
- * SDA and SCL GPIOs have external pullups. Setting the respective GPIO to
- * an input will make the signal a '1' via the pullup. Setting them to
- * outputs will pull them down.
- *
- * The GPIOs are open drain signals and are used as configuration strap inputs
- * during power-up so there's generally a buffer on the board that needs to be
- * 'enabled' to drive the GPIOs.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
-#include <mach/gpio-ixp2000.h>
-
-static inline int ixp2000_scl_pin(void *data)
-{
- return ((struct ixp2000_i2c_pins*)data)->scl_pin;
-}
-
-static inline int ixp2000_sda_pin(void *data)
-{
- return ((struct ixp2000_i2c_pins*)data)->sda_pin;
-}
-
-
-static void ixp2000_bit_setscl(void *data, int val)
-{
- int i = 5000;
-
- if (val) {
- gpio_line_config(ixp2000_scl_pin(data), GPIO_IN);
- while(!gpio_line_get(ixp2000_scl_pin(data)) && i--);
- } else {
- gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT);
- }
-}
-
-static void ixp2000_bit_setsda(void *data, int val)
-{
- if (val) {
- gpio_line_config(ixp2000_sda_pin(data), GPIO_IN);
- } else {
- gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT);
- }
-}
-
-static int ixp2000_bit_getscl(void *data)
-{
- return gpio_line_get(ixp2000_scl_pin(data));
-}
-
-static int ixp2000_bit_getsda(void *data)
-{
- return gpio_line_get(ixp2000_sda_pin(data));
-}
-
-struct ixp2000_i2c_data {
- struct ixp2000_i2c_pins *gpio_pins;
- struct i2c_adapter adapter;
- struct i2c_algo_bit_data algo_data;
-};
-
-static int ixp2000_i2c_remove(struct platform_device *plat_dev)
-{
- struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev);
-
- platform_set_drvdata(plat_dev, NULL);
-
- i2c_del_adapter(&drv_data->adapter);
-
- kfree(drv_data);
-
- return 0;
-}
-
-static int ixp2000_i2c_probe(struct platform_device *plat_dev)
-{
- int err;
- struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
- struct ixp2000_i2c_data *drv_data =
- kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
-
- if (!drv_data)
- return -ENOMEM;
- drv_data->gpio_pins = gpio;
-
- drv_data->algo_data.data = gpio;
- drv_data->algo_data.setsda = ixp2000_bit_setsda;
- drv_data->algo_data.setscl = ixp2000_bit_setscl;
- drv_data->algo_data.getsda = ixp2000_bit_getsda;
- drv_data->algo_data.getscl = ixp2000_bit_getscl;
- drv_data->algo_data.udelay = 6;
- drv_data->algo_data.timeout = HZ;
-
- strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
- sizeof(drv_data->adapter.name));
- drv_data->adapter.algo_data = &drv_data->algo_data,
-
- drv_data->adapter.dev.parent = &plat_dev->dev;
-
- gpio_line_config(gpio->sda_pin, GPIO_IN);
- gpio_line_config(gpio->scl_pin, GPIO_IN);
- gpio_line_set(gpio->scl_pin, 0);
- gpio_line_set(gpio->sda_pin, 0);
-
- if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
- dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
- kfree(drv_data);
- return err;
- }
-
- platform_set_drvdata(plat_dev, drv_data);
-
- return 0;
-}
-
-static struct platform_driver ixp2000_i2c_driver = {
- .probe = ixp2000_i2c_probe,
- .remove = ixp2000_i2c_remove,
- .driver = {
- .name = "IXP2000-I2C",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(ixp2000_i2c_driver);
-
-MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:IXP2000-I2C");
-
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 206caac..b76731e 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -64,6 +64,9 @@
struct i2c_adapter adap;
int irq;
u32 real_clk;
+#ifdef CONFIG_PM
+ u8 fdr, dfsrr;
+#endif
};
struct mpc_i2c_divider {
@@ -703,6 +706,30 @@
return 0;
};
+#ifdef CONFIG_PM
+static int mpc_i2c_suspend(struct device *dev)
+{
+ struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+ i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
+ i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
+
+ return 0;
+}
+
+static int mpc_i2c_resume(struct device *dev)
+{
+ struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+ writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
+ writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
+
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#endif
+
static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
.setup = mpc_i2c_setup_512x,
};
@@ -747,6 +774,9 @@
.owner = THIS_MODULE,
.name = DRV_NAME,
.of_match_table = mpc_i2c_of_match,
+#ifdef CONFIG_PM
+ .pm = &mpc_i2c_pm_ops,
+#endif
},
};
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 7fa73ee..04eb441 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -27,8 +27,10 @@
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
-
-#include <mach/common.h>
+#include <linux/stmp_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#define DRIVER_NAME "mxs-i2c"
@@ -112,13 +114,9 @@
struct i2c_adapter adapter;
};
-/*
- * TODO: check if calls to here are really needed. If not, we could get rid of
- * mxs_reset_block and the mach-dependency. Needs an I2C analyzer, probably.
- */
static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
- mxs_reset_block(i2c->regs);
+ stmp_reset_block(i2c->regs);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
@@ -371,6 +369,7 @@
adap->algo = &mxs_i2c_algo;
adap->dev.parent = dev;
adap->nr = pdev->id;
+ adap->dev.of_node = pdev->dev.of_node;
i2c_set_adapdata(adap, i2c);
err = i2c_add_numbered_adapter(adap);
if (err) {
@@ -380,6 +379,8 @@
return err;
}
+ of_i2c_register_devices(adap);
+
return 0;
}
@@ -399,10 +400,17 @@
return 0;
}
+static const struct of_device_id mxs_i2c_dt_ids[] = {
+ { .compatible = "fsl,imx28-i2c", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids);
+
static struct platform_driver mxs_i2c_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = mxs_i2c_dt_ids,
},
.remove = __devexit_p(mxs_i2c_remove),
};
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 18068de..75194c5 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -55,6 +55,7 @@
#include <linux/i2c-ocores.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/of_i2c.h>
struct ocores_i2c {
void __iomem *base;
@@ -343,6 +344,8 @@
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
i2c_new_device(&i2c->adap, pdata->devices + i);
+ } else {
+ of_i2c_register_devices(&i2c->adap);
}
return 0;
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 2adbf1a..675878f 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -171,7 +171,7 @@
i2c->io_size = resource_size(res);
i2c->irq = irq;
- i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+ i2c->adap.nr = pdev->id;
i2c->adap.owner = THIS_MODULE;
snprintf(i2c->adap.name, sizeof(i2c->adap.name),
"PCA9564/PCA9665 at 0x%08lx",
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index f673326..a997c7d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1131,11 +1131,6 @@
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
- /*
- * If "dev->id" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
i2c->adap.nr = dev->id;
snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
i2c->adap.nr);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 737f721..fa0b134 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -44,8 +44,12 @@
#include <plat/regs-iic.h>
#include <plat/iic.h>
-/* i2c controller state */
+/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
+#define QUIRK_S3C2440 (1 << 0)
+#define QUIRK_HDMIPHY (1 << 1)
+#define QUIRK_NO_GPIO (1 << 2)
+/* i2c controller state */
enum s3c24xx_i2c_state {
STATE_IDLE,
STATE_START,
@@ -54,14 +58,10 @@
STATE_STOP
};
-enum s3c24xx_i2c_type {
- TYPE_S3C2410,
- TYPE_S3C2440,
-};
-
struct s3c24xx_i2c {
spinlock_t lock;
wait_queue_head_t wait;
+ unsigned int quirks;
unsigned int suspended:1;
struct i2c_msg *msg;
@@ -88,26 +88,45 @@
#endif
};
-/* default platform data removed, dev should always carry data. */
-
-/* s3c24xx_i2c_is2440()
- *
- * return true is this is an s3c2440
-*/
-
-static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
-{
- struct platform_device *pdev = to_platform_device(i2c->dev);
- enum s3c24xx_i2c_type type;
+static struct platform_device_id s3c24xx_driver_ids[] = {
+ {
+ .name = "s3c2410-i2c",
+ .driver_data = 0,
+ }, {
+ .name = "s3c2440-i2c",
+ .driver_data = QUIRK_S3C2440,
+ }, {
+ .name = "s3c2440-hdmiphy-i2c",
+ .driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
+ }, { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
#ifdef CONFIG_OF
- if (i2c->dev->of_node)
- return of_device_is_compatible(i2c->dev->of_node,
- "samsung,s3c2440-i2c");
+static const struct of_device_id s3c24xx_i2c_match[] = {
+ { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
+ { .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
+ { .compatible = "samsung,s3c2440-hdmiphy-i2c",
+ .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
#endif
- type = platform_get_device_id(pdev)->driver_data;
- return type == TYPE_S3C2440;
+/* s3c24xx_get_device_quirks
+ *
+ * Get controller type either from device tree or platform device variant.
+*/
+
+static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);
+ return (unsigned int)match->data;
+ }
+
+ return platform_get_device_id(pdev)->driver_data;
}
/* s3c24xx_i2c_master_complete
@@ -471,6 +490,13 @@
unsigned long iicstat;
int timeout = 400;
+ /* the timeout for HDMIPHY is reduced to 10 ms because
+ * the hangup is expected to happen, so waiting 400 ms
+ * causes only unnecessary system hangup
+ */
+ if (i2c->quirks & QUIRK_HDMIPHY)
+ timeout = 10;
+
while (timeout-- > 0) {
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
@@ -480,6 +506,15 @@
msleep(1);
}
+ /* hang-up of bus dedicated for HDMIPHY occurred, resetting */
+ if (i2c->quirks & QUIRK_HDMIPHY) {
+ writel(0, i2c->regs + S3C2410_IICCON);
+ writel(0, i2c->regs + S3C2410_IICSTAT);
+ writel(0, i2c->regs + S3C2410_IICDS);
+
+ return 0;
+ }
+
return -ETIMEDOUT;
}
@@ -676,7 +711,7 @@
writel(iiccon, i2c->regs + S3C2410_IICCON);
- if (s3c24xx_i2c_is2440(i2c)) {
+ if (i2c->quirks & QUIRK_S3C2440) {
unsigned long sda_delay;
if (pdata->sda_delay) {
@@ -761,6 +796,9 @@
{
int idx, gpio, ret;
+ if (i2c->quirks & QUIRK_NO_GPIO)
+ return 0;
+
for (idx = 0; idx < 2; idx++) {
gpio = of_get_gpio(i2c->dev->of_node, idx);
if (!gpio_is_valid(gpio)) {
@@ -785,6 +823,10 @@
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
{
unsigned int idx;
+
+ if (i2c->quirks & QUIRK_NO_GPIO)
+ return;
+
for (idx = 0; idx < 2; idx++)
gpio_free(i2c->gpios[idx]);
}
@@ -906,6 +948,7 @@
goto err_noclk;
}
+ i2c->quirks = s3c24xx_get_device_quirks(pdev);
if (pdata)
memcpy(i2c->pdata, pdata, sizeof(*pdata));
else
@@ -1110,28 +1153,6 @@
/* device driver for platform bus bits */
-static struct platform_device_id s3c24xx_driver_ids[] = {
- {
- .name = "s3c2410-i2c",
- .driver_data = TYPE_S3C2410,
- }, {
- .name = "s3c2440-i2c",
- .driver_data = TYPE_S3C2440,
- }, { },
-};
-MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c24xx_i2c_match[] = {
- { .compatible = "samsung,s3c2410-i2c" },
- { .compatible = "samsung,s3c2440-i2c" },
- {},
-};
-MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
-#else
-#define s3c24xx_i2c_match NULL
-#endif
-
static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
@@ -1140,7 +1161,7 @@
.owner = THIS_MODULE,
.name = "s3c-i2c",
.pm = S3C24XX_DEV_PM_OPS,
- .of_match_table = s3c24xx_i2c_match,
+ .of_match_table = of_match_ptr(s3c24xx_i2c_match),
},
};
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 675c969..8110ca4 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
+#include <linux/of_i2c.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
@@ -653,6 +654,7 @@
adap->dev.parent = &dev->dev;
adap->retries = 5;
adap->nr = dev->id;
+ adap->dev.of_node = dev->dev.of_node;
strlcpy(adap->name, dev->name, sizeof(adap->name));
@@ -667,6 +669,8 @@
dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
adap->nr, pd->bus_speed);
+
+ of_i2c_register_devices(adap);
return 0;
err_all:
@@ -710,11 +714,18 @@
.runtime_resume = sh_mobile_i2c_runtime_nop,
};
+static const struct of_device_id sh_mobile_i2c_dt_ids[] __devinitconst = {
+ { .compatible = "renesas,rmobile-iic", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
+
static struct platform_driver sh_mobile_i2c_driver = {
.driver = {
.name = "i2c-sh_mobile",
.owner = THIS_MODULE,
.pm = &sh_mobile_i2c_dev_pm_ops,
+ .of_match_table = sh_mobile_i2c_dt_ids,
},
.probe = sh_mobile_i2c_probe,
.remove = sh_mobile_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 55e5ea6..8b2e555 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -401,8 +401,6 @@
disable_irq_nosync(i2c_dev->irq);
i2c_dev->irq_disabled = 1;
}
-
- complete(&i2c_dev->msg_complete);
goto err;
}
@@ -411,7 +409,6 @@
i2c_dev->msg_err |= I2C_ERR_NO_ACK;
if (status & I2C_INT_ARBITRATION_LOST)
i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
- complete(&i2c_dev->msg_complete);
goto err;
}
@@ -429,14 +426,14 @@
tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
}
+ i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+ if (i2c_dev->is_dvc)
+ dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
if (status & I2C_INT_PACKET_XFER_COMPLETE) {
BUG_ON(i2c_dev->msg_buf_remaining);
complete(&i2c_dev->msg_complete);
}
-
- i2c_writel(i2c_dev, status, I2C_INT_STATUS);
- if (i2c_dev->is_dvc)
- dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
return IRQ_HANDLED;
err:
/* An error occurred, mask all interrupts */
@@ -446,6 +443,8 @@
i2c_writel(i2c_dev, status, I2C_INT_STATUS);
if (i2c_dev->is_dvc)
dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+ complete(&i2c_dev->msg_complete);
return IRQ_HANDLED;
}
@@ -476,12 +475,15 @@
packet_header = msg->len - 1;
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
- packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
- packet_header |= I2C_HEADER_IE_ENABLE;
+ packet_header = I2C_HEADER_IE_ENABLE;
if (!stop)
packet_header |= I2C_HEADER_REPEAT_START;
- if (msg->flags & I2C_M_TEN)
+ if (msg->flags & I2C_M_TEN) {
+ packet_header |= msg->addr;
packet_header |= I2C_HEADER_10BIT_ADDR;
+ } else {
+ packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+ }
if (msg->flags & I2C_M_IGNORE_NAK)
packet_header |= I2C_HEADER_CONT_ON_NAK;
if (msg->flags & I2C_M_RD)
@@ -557,7 +559,7 @@
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
}
static const struct i2c_algorithm tegra_i2c_algo = {
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index f585aea..eec20db 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -104,13 +104,8 @@
i2c->algo = i2c_versatile_algo;
i2c->algo.data = i2c;
- if (dev->id >= 0) {
- /* static bus numbering */
- i2c->adap.nr = dev->id;
- ret = i2c_bit_add_numbered_bus(&i2c->adap);
- } else
- /* dynamic bus numbering */
- ret = i2c_bit_add_bus(&i2c->adap);
+ i2c->adap.nr = dev->id;
+ ret = i2c_bit_add_numbered_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
of_i2c_register_devices(&i2c->adap);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 2bded76..641d0e5 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -40,6 +40,7 @@
#include <linux/i2c-xiic.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of_i2c.h>
#define DRIVER_NAME "xiic-i2c"
@@ -705,8 +706,6 @@
goto resource_missing;
pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
- if (!pdata)
- return -EINVAL;
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
if (!i2c)
@@ -730,6 +729,7 @@
i2c->adap = xiic_adapter;
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
xiic_reinit(i2c);
@@ -748,9 +748,13 @@
goto add_adapter_failed;
}
- /* add in known devices to the bus */
- for (i = 0; i < pdata->num_devices; i++)
- i2c_new_device(&i2c->adap, pdata->devices + i);
+ if (pdata) {
+ /* add in known devices to the bus */
+ for (i = 0; i < pdata->num_devices; i++)
+ i2c_new_device(&i2c->adap, pdata->devices + i);
+ }
+
+ of_i2c_register_devices(&i2c->adap);
return 0;
@@ -795,12 +799,21 @@
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id xiic_of_match[] __devinitconst = {
+ { .compatible = "xlnx,xps-iic-2.00.a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xiic_of_match);
+#endif
+
static struct platform_driver xiic_i2c_driver = {
.probe = xiic_i2c_probe,
.remove = __devexit_p(xiic_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(xiic_of_match),
},
};
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index feb7dc3..a6ad32b 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -772,6 +772,23 @@
};
EXPORT_SYMBOL_GPL(i2c_adapter_type);
+/**
+ * i2c_verify_adapter - return parameter as i2c_adapter or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find. Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_adapter.
+ */
+struct i2c_adapter *i2c_verify_adapter(struct device *dev)
+{
+ return (dev->type == &i2c_adapter_type)
+ ? to_i2c_adapter(dev)
+ : NULL;
+}
+EXPORT_SYMBOL(i2c_verify_adapter);
+
#ifdef CONFIG_I2C_COMPAT
static struct class_compat *i2c_adapter_compat_class;
#endif
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index d7a4833..1038c38 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -24,6 +24,8 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
/* multiplexer per channel data */
struct i2c_mux_priv {
@@ -31,11 +33,11 @@
struct i2c_algorithm algo;
struct i2c_adapter *parent;
- void *mux_dev; /* the mux chip/device */
+ void *mux_priv; /* the mux chip/device */
u32 chan_id; /* the channel id */
- int (*select)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
- int (*deselect)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+ int (*select)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
+ int (*deselect)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
};
static int i2c_mux_master_xfer(struct i2c_adapter *adap,
@@ -47,11 +49,11 @@
/* Switch to the right mux port and perform the transfer. */
- ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+ ret = priv->select(parent, priv->mux_priv, priv->chan_id);
if (ret >= 0)
ret = parent->algo->master_xfer(parent, msgs, num);
if (priv->deselect)
- priv->deselect(parent, priv->mux_dev, priv->chan_id);
+ priv->deselect(parent, priv->mux_priv, priv->chan_id);
return ret;
}
@@ -67,12 +69,12 @@
/* Select the right mux port and perform the transfer. */
- ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+ ret = priv->select(parent, priv->mux_priv, priv->chan_id);
if (ret >= 0)
ret = parent->algo->smbus_xfer(parent, addr, flags,
read_write, command, size, data);
if (priv->deselect)
- priv->deselect(parent, priv->mux_dev, priv->chan_id);
+ priv->deselect(parent, priv->mux_priv, priv->chan_id);
return ret;
}
@@ -87,7 +89,8 @@
}
struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
- void *mux_dev, u32 force_nr, u32 chan_id,
+ struct device *mux_dev,
+ void *mux_priv, u32 force_nr, u32 chan_id,
int (*select) (struct i2c_adapter *,
void *, u32),
int (*deselect) (struct i2c_adapter *,
@@ -102,7 +105,7 @@
/* Set up private adapter data */
priv->parent = parent;
- priv->mux_dev = mux_dev;
+ priv->mux_priv = mux_priv;
priv->chan_id = chan_id;
priv->select = select;
priv->deselect = deselect;
@@ -124,6 +127,25 @@
priv->adap.algo_data = priv;
priv->adap.dev.parent = &parent->dev;
+ /*
+ * Try to populate the mux adapter's of_node, expands to
+ * nothing if !CONFIG_OF.
+ */
+ if (mux_dev->of_node) {
+ struct device_node *child;
+ u32 reg;
+
+ for_each_child_of_node(mux_dev->of_node, child) {
+ ret = of_property_read_u32(child, "reg", ®);
+ if (ret)
+ continue;
+ if (chan_id == reg) {
+ priv->adap.dev.of_node = child;
+ break;
+ }
+ }
+ }
+
if (force_nr) {
priv->adap.nr = force_nr;
ret = i2c_add_numbered_adapter(&priv->adap);
@@ -141,6 +163,8 @@
dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
i2c_adapter_id(&priv->adap));
+ of_i2c_register_devices(&priv->adap);
+
return &priv->adap;
}
EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 90b7a01..beb2491 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -15,7 +15,7 @@
through GPIO pins.
This driver can also be built as a module. If so, the module
- will be called gpio-i2cmux.
+ will be called i2c-mux-gpio.
config I2C_MUX_PCA9541
tristate "NXP PCA9541 I2C Master Selector"
@@ -25,7 +25,7 @@
I2C Master Selector.
This driver can also be built as a module. If so, the module
- will be called pca9541.
+ will be called i2c-mux-pca9541.
config I2C_MUX_PCA954x
tristate "Philips PCA954x I2C Mux/switches"
@@ -35,6 +35,6 @@
I2C mux/switch devices.
This driver can also be built as a module. If so, the module
- will be called pca954x.
+ will be called i2c-mux-pca954x.
endmenu
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index 4640436..5826249 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -1,8 +1,8 @@
#
# Makefile for multiplexer I2C chip drivers.
-obj-$(CONFIG_I2C_MUX_GPIO) += gpio-i2cmux.o
-obj-$(CONFIG_I2C_MUX_PCA9541) += pca9541.o
-obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o
+obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
+obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
+obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/muxes/gpio-i2cmux.c b/drivers/i2c/muxes/i2c-mux-gpio.c
similarity index 73%
rename from drivers/i2c/muxes/gpio-i2cmux.c
rename to drivers/i2c/muxes/i2c-mux-gpio.c
index e5fa695..68b1f8e 100644
--- a/drivers/i2c/muxes/gpio-i2cmux.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -10,7 +10,7 @@
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -20,10 +20,10 @@
struct gpiomux {
struct i2c_adapter *parent;
struct i2c_adapter **adap; /* child busses */
- struct gpio_i2cmux_platform_data data;
+ struct i2c_mux_gpio_platform_data data;
};
-static void gpiomux_set(const struct gpiomux *mux, unsigned val)
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
{
int i;
@@ -31,28 +31,28 @@
gpio_set_value(mux->data.gpios[i], val & (1 << i));
}
-static int gpiomux_select(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
{
struct gpiomux *mux = data;
- gpiomux_set(mux, mux->data.values[chan]);
+ i2c_mux_gpio_set(mux, mux->data.values[chan]);
return 0;
}
-static int gpiomux_deselect(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_deselect(struct i2c_adapter *adap, void *data, u32 chan)
{
struct gpiomux *mux = data;
- gpiomux_set(mux, mux->data.idle);
+ i2c_mux_gpio_set(mux, mux->data.idle);
return 0;
}
-static int __devinit gpiomux_probe(struct platform_device *pdev)
+static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
{
struct gpiomux *mux;
- struct gpio_i2cmux_platform_data *pdata;
+ struct i2c_mux_gpio_platform_data *pdata;
struct i2c_adapter *parent;
int (*deselect) (struct i2c_adapter *, void *, u32);
unsigned initial_state;
@@ -86,16 +86,16 @@
goto alloc_failed2;
}
- if (pdata->idle != GPIO_I2CMUX_NO_IDLE) {
+ if (pdata->idle != I2C_MUX_GPIO_NO_IDLE) {
initial_state = pdata->idle;
- deselect = gpiomux_deselect;
+ deselect = i2c_mux_gpio_deselect;
} else {
initial_state = pdata->values[0];
deselect = NULL;
}
for (i = 0; i < pdata->n_gpios; i++) {
- ret = gpio_request(pdata->gpios[i], "gpio-i2cmux");
+ ret = gpio_request(pdata->gpios[i], "i2c-mux-gpio");
if (ret)
goto err_request_gpio;
gpio_direction_output(pdata->gpios[i],
@@ -105,8 +105,8 @@
for (i = 0; i < pdata->n_values; i++) {
u32 nr = pdata->base_nr ? (pdata->base_nr + i) : 0;
- mux->adap[i] = i2c_add_mux_adapter(parent, mux, nr, i,
- gpiomux_select, deselect);
+ mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr, i,
+ i2c_mux_gpio_select, deselect);
if (!mux->adap[i]) {
ret = -ENODEV;
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
@@ -137,7 +137,7 @@
return ret;
}
-static int __devexit gpiomux_remove(struct platform_device *pdev)
+static int __devexit i2c_mux_gpio_remove(struct platform_device *pdev)
{
struct gpiomux *mux = platform_get_drvdata(pdev);
int i;
@@ -156,18 +156,18 @@
return 0;
}
-static struct platform_driver gpiomux_driver = {
- .probe = gpiomux_probe,
- .remove = __devexit_p(gpiomux_remove),
+static struct platform_driver i2c_mux_gpio_driver = {
+ .probe = i2c_mux_gpio_probe,
+ .remove = __devexit_p(i2c_mux_gpio_remove),
.driver = {
.owner = THIS_MODULE,
- .name = "gpio-i2cmux",
+ .name = "i2c-mux-gpio",
},
};
-module_platform_driver(gpiomux_driver);
+module_platform_driver(i2c_mux_gpio_driver);
MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver");
MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:gpio-i2cmux");
+MODULE_ALIAS("platform:i2c-mux-gpio");
diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
similarity index 98%
rename from drivers/i2c/muxes/pca9541.c
rename to drivers/i2c/muxes/i2c-mux-pca9541.c
index e0df9b6..8aacde1 100644
--- a/drivers/i2c/muxes/pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -353,7 +353,8 @@
force = 0;
if (pdata)
force = pdata->modes[0].adap_id;
- data->mux_adap = i2c_add_mux_adapter(adap, client, force, 0,
+ data->mux_adap = i2c_add_mux_adapter(adap, &client->dev, client,
+ force, 0,
pca9541_select_chan,
pca9541_release_chan);
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
similarity index 99%
rename from drivers/i2c/muxes/pca954x.c
rename to drivers/i2c/muxes/i2c-mux-pca954x.c
index 0e37ef2..f2dfe0d 100644
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -226,7 +226,7 @@
}
data->virt_adaps[num] =
- i2c_add_mux_adapter(adap, client,
+ i2c_add_mux_adapter(adap, &client->dev, client,
force, num, pca954x_select_chan,
(pdata && pdata->modes[num].deselect_on_exit)
? pca954x_deselect_mux : NULL);
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 29fe1b2..7f7b724 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -311,7 +311,15 @@
if (pdata->enable_rotary0 || pdata->enable_rotary1)
pxa27x_keypad_scan_rotary(keypad);
- new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+ /*
+ * The KPDR_DK only output the key pin level, so it relates to board,
+ * and low level may be active.
+ */
+ if (pdata->direct_key_low_active)
+ new_state = ~KPDK_DK(kpdk) & keypad->direct_key_mask;
+ else
+ new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+
bits_changed = keypad->direct_key_state ^ new_state;
if (bits_changed == 0)
@@ -383,7 +391,14 @@
if (pdata->direct_key_num > direct_key_num)
direct_key_num = pdata->direct_key_num;
- keypad->direct_key_mask = ((2 << direct_key_num) - 1) & ~mask;
+ /*
+ * Direct keys usage may not start from KP_DKIN0, check the platfrom
+ * mask data to config the specific.
+ */
+ if (pdata->direct_key_mask)
+ keypad->direct_key_mask = pdata->direct_key_mask;
+ else
+ keypad->direct_key_mask = ((1 << direct_key_num) - 1) & ~mask;
/* enable direct key */
if (direct_key_num)
@@ -399,7 +414,7 @@
struct pxa27x_keypad *keypad = input_get_drvdata(dev);
/* Enable unit clock */
- clk_enable(keypad->clk);
+ clk_prepare_enable(keypad->clk);
pxa27x_keypad_config(keypad);
return 0;
@@ -410,7 +425,7 @@
struct pxa27x_keypad *keypad = input_get_drvdata(dev);
/* Disable clock unit */
- clk_disable(keypad->clk);
+ clk_disable_unprepare(keypad->clk);
}
#ifdef CONFIG_PM
@@ -419,10 +434,14 @@
struct platform_device *pdev = to_platform_device(dev);
struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
- clk_disable(keypad->clk);
-
+ /*
+ * If the keypad is used a wake up source, clock can not be disabled.
+ * Or it can not detect the key pressing.
+ */
if (device_may_wakeup(&pdev->dev))
enable_irq_wake(keypad->irq);
+ else
+ clk_disable_unprepare(keypad->clk);
return 0;
}
@@ -433,19 +452,24 @@
struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
- if (device_may_wakeup(&pdev->dev))
+ /*
+ * If the keypad is used as wake up source, the clock is not turned
+ * off. So do not need configure it again.
+ */
+ if (device_may_wakeup(&pdev->dev)) {
disable_irq_wake(keypad->irq);
+ } else {
+ mutex_lock(&input_dev->mutex);
- mutex_lock(&input_dev->mutex);
+ if (input_dev->users) {
+ /* Enable unit clock */
+ clk_prepare_enable(keypad->clk);
+ pxa27x_keypad_config(keypad);
+ }
- if (input_dev->users) {
- /* Enable unit clock */
- clk_enable(keypad->clk);
- pxa27x_keypad_config(keypad);
+ mutex_unlock(&input_dev->mutex);
}
- mutex_unlock(&input_dev->mutex);
-
return 0;
}
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index c698437..3408937 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -162,4 +162,25 @@
space through the SMMU (System Memory Management Unit)
hardware included on Tegra SoCs.
+config EXYNOS_IOMMU
+ bool "Exynos IOMMU Support"
+ depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
+ select IOMMU_API
+ help
+ Support for the IOMMU(System MMU) of Samsung Exynos application
+ processor family. This enables H/W multimedia accellerators to see
+ non-linear physical memory chunks as a linear memory in their
+ address spaces
+
+ If unsure, say N here.
+
+config EXYNOS_IOMMU_DEBUG
+ bool "Debugging log for Exynos IOMMU"
+ depends on EXYNOS_IOMMU
+ help
+ Select this to see the detailed log message that shows what
+ happens in the IOMMU driver
+
+ Say N unless you need kernel log message for IOMMU debugging
+
endif # IOMMU_SUPPORT
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 3e5e82a..76e54ef 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -10,3 +10,4 @@
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
obj-$(CONFIG_TEGRA_IOMMU_GART) += tegra-gart.o
obj-$(CONFIG_TEGRA_IOMMU_SMMU) += tegra-smmu.o
+obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
new file mode 100644
index 0000000..9a114b9
--- /dev/null
+++ b/drivers/iommu/exynos-iommu.c
@@ -0,0 +1,1076 @@
+/* linux/drivers/iommu/exynos_iommu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CONFIG_EXYNOS_IOMMU_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mm.h>
+#include <linux/iommu.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/export.h>
+
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+
+#include <mach/sysmmu.h>
+
+/* We does not consider super section mapping (16MB) */
+#define SECT_ORDER 20
+#define LPAGE_ORDER 16
+#define SPAGE_ORDER 12
+
+#define SECT_SIZE (1 << SECT_ORDER)
+#define LPAGE_SIZE (1 << LPAGE_ORDER)
+#define SPAGE_SIZE (1 << SPAGE_ORDER)
+
+#define SECT_MASK (~(SECT_SIZE - 1))
+#define LPAGE_MASK (~(LPAGE_SIZE - 1))
+#define SPAGE_MASK (~(SPAGE_SIZE - 1))
+
+#define lv1ent_fault(sent) (((*(sent) & 3) == 0) || ((*(sent) & 3) == 3))
+#define lv1ent_page(sent) ((*(sent) & 3) == 1)
+#define lv1ent_section(sent) ((*(sent) & 3) == 2)
+
+#define lv2ent_fault(pent) ((*(pent) & 3) == 0)
+#define lv2ent_small(pent) ((*(pent) & 2) == 2)
+#define lv2ent_large(pent) ((*(pent) & 3) == 1)
+
+#define section_phys(sent) (*(sent) & SECT_MASK)
+#define section_offs(iova) ((iova) & 0xFFFFF)
+#define lpage_phys(pent) (*(pent) & LPAGE_MASK)
+#define lpage_offs(iova) ((iova) & 0xFFFF)
+#define spage_phys(pent) (*(pent) & SPAGE_MASK)
+#define spage_offs(iova) ((iova) & 0xFFF)
+
+#define lv1ent_offset(iova) ((iova) >> SECT_ORDER)
+#define lv2ent_offset(iova) (((iova) & 0xFF000) >> SPAGE_ORDER)
+
+#define NUM_LV1ENTRIES 4096
+#define NUM_LV2ENTRIES 256
+
+#define LV2TABLE_SIZE (NUM_LV2ENTRIES * sizeof(long))
+
+#define SPAGES_PER_LPAGE (LPAGE_SIZE / SPAGE_SIZE)
+
+#define lv2table_base(sent) (*(sent) & 0xFFFFFC00)
+
+#define mk_lv1ent_sect(pa) ((pa) | 2)
+#define mk_lv1ent_page(pa) ((pa) | 1)
+#define mk_lv2ent_lpage(pa) ((pa) | 1)
+#define mk_lv2ent_spage(pa) ((pa) | 2)
+
+#define CTRL_ENABLE 0x5
+#define CTRL_BLOCK 0x7
+#define CTRL_DISABLE 0x0
+
+#define REG_MMU_CTRL 0x000
+#define REG_MMU_CFG 0x004
+#define REG_MMU_STATUS 0x008
+#define REG_MMU_FLUSH 0x00C
+#define REG_MMU_FLUSH_ENTRY 0x010
+#define REG_PT_BASE_ADDR 0x014
+#define REG_INT_STATUS 0x018
+#define REG_INT_CLEAR 0x01C
+
+#define REG_PAGE_FAULT_ADDR 0x024
+#define REG_AW_FAULT_ADDR 0x028
+#define REG_AR_FAULT_ADDR 0x02C
+#define REG_DEFAULT_SLAVE_ADDR 0x030
+
+#define REG_MMU_VERSION 0x034
+
+#define REG_PB0_SADDR 0x04C
+#define REG_PB0_EADDR 0x050
+#define REG_PB1_SADDR 0x054
+#define REG_PB1_EADDR 0x058
+
+static unsigned long *section_entry(unsigned long *pgtable, unsigned long iova)
+{
+ return pgtable + lv1ent_offset(iova);
+}
+
+static unsigned long *page_entry(unsigned long *sent, unsigned long iova)
+{
+ return (unsigned long *)__va(lv2table_base(sent)) + lv2ent_offset(iova);
+}
+
+enum exynos_sysmmu_inttype {
+ SYSMMU_PAGEFAULT,
+ SYSMMU_AR_MULTIHIT,
+ SYSMMU_AW_MULTIHIT,
+ SYSMMU_BUSERROR,
+ SYSMMU_AR_SECURITY,
+ SYSMMU_AR_ACCESS,
+ SYSMMU_AW_SECURITY,
+ SYSMMU_AW_PROTECTION, /* 7 */
+ SYSMMU_FAULT_UNKNOWN,
+ SYSMMU_FAULTS_NUM
+};
+
+/*
+ * @itype: type of fault.
+ * @pgtable_base: the physical address of page table base. This is 0 if @itype
+ * is SYSMMU_BUSERROR.
+ * @fault_addr: the device (virtual) address that the System MMU tried to
+ * translated. This is 0 if @itype is SYSMMU_BUSERROR.
+ */
+typedef int (*sysmmu_fault_handler_t)(enum exynos_sysmmu_inttype itype,
+ unsigned long pgtable_base, unsigned long fault_addr);
+
+static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
+ REG_PAGE_FAULT_ADDR,
+ REG_AR_FAULT_ADDR,
+ REG_AW_FAULT_ADDR,
+ REG_DEFAULT_SLAVE_ADDR,
+ REG_AR_FAULT_ADDR,
+ REG_AR_FAULT_ADDR,
+ REG_AW_FAULT_ADDR,
+ REG_AW_FAULT_ADDR
+};
+
+static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
+ "PAGE FAULT",
+ "AR MULTI-HIT FAULT",
+ "AW MULTI-HIT FAULT",
+ "BUS ERROR",
+ "AR SECURITY PROTECTION FAULT",
+ "AR ACCESS PROTECTION FAULT",
+ "AW SECURITY PROTECTION FAULT",
+ "AW ACCESS PROTECTION FAULT",
+ "UNKNOWN FAULT"
+};
+
+struct exynos_iommu_domain {
+ struct list_head clients; /* list of sysmmu_drvdata.node */
+ unsigned long *pgtable; /* lv1 page table, 16KB */
+ short *lv2entcnt; /* free lv2 entry counter for each section */
+ spinlock_t lock; /* lock for this structure */
+ spinlock_t pgtablelock; /* lock for modifying page table @ pgtable */
+};
+
+struct sysmmu_drvdata {
+ struct list_head node; /* entry of exynos_iommu_domain.clients */
+ struct device *sysmmu; /* System MMU's device descriptor */
+ struct device *dev; /* Owner of system MMU */
+ char *dbgname;
+ int nsfrs;
+ void __iomem **sfrbases;
+ struct clk *clk[2];
+ int activations;
+ rwlock_t lock;
+ struct iommu_domain *domain;
+ sysmmu_fault_handler_t fault_handler;
+ unsigned long pgtable;
+};
+
+static bool set_sysmmu_active(struct sysmmu_drvdata *data)
+{
+ /* return true if the System MMU was not active previously
+ and it needs to be initialized */
+ return ++data->activations == 1;
+}
+
+static bool set_sysmmu_inactive(struct sysmmu_drvdata *data)
+{
+ /* return true if the System MMU is needed to be disabled */
+ BUG_ON(data->activations < 1);
+ return --data->activations == 0;
+}
+
+static bool is_sysmmu_active(struct sysmmu_drvdata *data)
+{
+ return data->activations > 0;
+}
+
+static void sysmmu_unblock(void __iomem *sfrbase)
+{
+ __raw_writel(CTRL_ENABLE, sfrbase + REG_MMU_CTRL);
+}
+
+static bool sysmmu_block(void __iomem *sfrbase)
+{
+ int i = 120;
+
+ __raw_writel(CTRL_BLOCK, sfrbase + REG_MMU_CTRL);
+ while ((i > 0) && !(__raw_readl(sfrbase + REG_MMU_STATUS) & 1))
+ --i;
+
+ if (!(__raw_readl(sfrbase + REG_MMU_STATUS) & 1)) {
+ sysmmu_unblock(sfrbase);
+ return false;
+ }
+
+ return true;
+}
+
+static void __sysmmu_tlb_invalidate(void __iomem *sfrbase)
+{
+ __raw_writel(0x1, sfrbase + REG_MMU_FLUSH);
+}
+
+static void __sysmmu_tlb_invalidate_entry(void __iomem *sfrbase,
+ unsigned long iova)
+{
+ __raw_writel((iova & SPAGE_MASK) | 1, sfrbase + REG_MMU_FLUSH_ENTRY);
+}
+
+static void __sysmmu_set_ptbase(void __iomem *sfrbase,
+ unsigned long pgd)
+{
+ __raw_writel(0x1, sfrbase + REG_MMU_CFG); /* 16KB LV1, LRU */
+ __raw_writel(pgd, sfrbase + REG_PT_BASE_ADDR);
+
+ __sysmmu_tlb_invalidate(sfrbase);
+}
+
+static void __sysmmu_set_prefbuf(void __iomem *sfrbase, unsigned long base,
+ unsigned long size, int idx)
+{
+ __raw_writel(base, sfrbase + REG_PB0_SADDR + idx * 8);
+ __raw_writel(size - 1 + base, sfrbase + REG_PB0_EADDR + idx * 8);
+}
+
+void exynos_sysmmu_set_prefbuf(struct device *dev,
+ unsigned long base0, unsigned long size0,
+ unsigned long base1, unsigned long size1)
+{
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+ unsigned long flags;
+ int i;
+
+ BUG_ON((base0 + size0) <= base0);
+ BUG_ON((size1 > 0) && ((base1 + size1) <= base1));
+
+ read_lock_irqsave(&data->lock, flags);
+ if (!is_sysmmu_active(data))
+ goto finish;
+
+ for (i = 0; i < data->nsfrs; i++) {
+ if ((readl(data->sfrbases[i] + REG_MMU_VERSION) >> 28) == 3) {
+ if (!sysmmu_block(data->sfrbases[i]))
+ continue;
+
+ if (size1 == 0) {
+ if (size0 <= SZ_128K) {
+ base1 = base0;
+ size1 = size0;
+ } else {
+ size1 = size0 -
+ ALIGN(size0 / 2, SZ_64K);
+ size0 = size0 - size1;
+ base1 = base0 + size0;
+ }
+ }
+
+ __sysmmu_set_prefbuf(
+ data->sfrbases[i], base0, size0, 0);
+ __sysmmu_set_prefbuf(
+ data->sfrbases[i], base1, size1, 1);
+
+ sysmmu_unblock(data->sfrbases[i]);
+ }
+ }
+finish:
+ read_unlock_irqrestore(&data->lock, flags);
+}
+
+static void __set_fault_handler(struct sysmmu_drvdata *data,
+ sysmmu_fault_handler_t handler)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&data->lock, flags);
+ data->fault_handler = handler;
+ write_unlock_irqrestore(&data->lock, flags);
+}
+
+void exynos_sysmmu_set_fault_handler(struct device *dev,
+ sysmmu_fault_handler_t handler)
+{
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+
+ __set_fault_handler(data, handler);
+}
+
+static int default_fault_handler(enum exynos_sysmmu_inttype itype,
+ unsigned long pgtable_base, unsigned long fault_addr)
+{
+ unsigned long *ent;
+
+ if ((itype >= SYSMMU_FAULTS_NUM) || (itype < SYSMMU_PAGEFAULT))
+ itype = SYSMMU_FAULT_UNKNOWN;
+
+ pr_err("%s occured at 0x%lx(Page table base: 0x%lx)\n",
+ sysmmu_fault_name[itype], fault_addr, pgtable_base);
+
+ ent = section_entry(__va(pgtable_base), fault_addr);
+ pr_err("\tLv1 entry: 0x%lx\n", *ent);
+
+ if (lv1ent_page(ent)) {
+ ent = page_entry(ent, fault_addr);
+ pr_err("\t Lv2 entry: 0x%lx\n", *ent);
+ }
+
+ pr_err("Generating Kernel OOPS... because it is unrecoverable.\n");
+
+ BUG();
+
+ return 0;
+}
+
+static irqreturn_t exynos_sysmmu_irq(int irq, void *dev_id)
+{
+ /* SYSMMU is in blocked when interrupt occurred. */
+ struct sysmmu_drvdata *data = dev_id;
+ struct resource *irqres;
+ struct platform_device *pdev;
+ enum exynos_sysmmu_inttype itype;
+ unsigned long addr = -1;
+
+ int i, ret = -ENOSYS;
+
+ read_lock(&data->lock);
+
+ WARN_ON(!is_sysmmu_active(data));
+
+ pdev = to_platform_device(data->sysmmu);
+ for (i = 0; i < (pdev->num_resources / 2); i++) {
+ irqres = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ if (irqres && ((int)irqres->start == irq))
+ break;
+ }
+
+ if (i == pdev->num_resources) {
+ itype = SYSMMU_FAULT_UNKNOWN;
+ } else {
+ itype = (enum exynos_sysmmu_inttype)
+ __ffs(__raw_readl(data->sfrbases[i] + REG_INT_STATUS));
+ if (WARN_ON(!((itype >= 0) && (itype < SYSMMU_FAULT_UNKNOWN))))
+ itype = SYSMMU_FAULT_UNKNOWN;
+ else
+ addr = __raw_readl(
+ data->sfrbases[i] + fault_reg_offset[itype]);
+ }
+
+ if (data->domain)
+ ret = report_iommu_fault(data->domain, data->dev,
+ addr, itype);
+
+ if ((ret == -ENOSYS) && data->fault_handler) {
+ unsigned long base = data->pgtable;
+ if (itype != SYSMMU_FAULT_UNKNOWN)
+ base = __raw_readl(
+ data->sfrbases[i] + REG_PT_BASE_ADDR);
+ ret = data->fault_handler(itype, base, addr);
+ }
+
+ if (!ret && (itype != SYSMMU_FAULT_UNKNOWN))
+ __raw_writel(1 << itype, data->sfrbases[i] + REG_INT_CLEAR);
+ else
+ dev_dbg(data->sysmmu, "(%s) %s is not handled.\n",
+ data->dbgname, sysmmu_fault_name[itype]);
+
+ if (itype != SYSMMU_FAULT_UNKNOWN)
+ sysmmu_unblock(data->sfrbases[i]);
+
+ read_unlock(&data->lock);
+
+ return IRQ_HANDLED;
+}
+
+static bool __exynos_sysmmu_disable(struct sysmmu_drvdata *data)
+{
+ unsigned long flags;
+ bool disabled = false;
+ int i;
+
+ write_lock_irqsave(&data->lock, flags);
+
+ if (!set_sysmmu_inactive(data))
+ goto finish;
+
+ for (i = 0; i < data->nsfrs; i++)
+ __raw_writel(CTRL_DISABLE, data->sfrbases[i] + REG_MMU_CTRL);
+
+ if (data->clk[1])
+ clk_disable(data->clk[1]);
+ if (data->clk[0])
+ clk_disable(data->clk[0]);
+
+ disabled = true;
+ data->pgtable = 0;
+ data->domain = NULL;
+finish:
+ write_unlock_irqrestore(&data->lock, flags);
+
+ if (disabled)
+ dev_dbg(data->sysmmu, "(%s) Disabled\n", data->dbgname);
+ else
+ dev_dbg(data->sysmmu, "(%s) %d times left to be disabled\n",
+ data->dbgname, data->activations);
+
+ return disabled;
+}
+
+/* __exynos_sysmmu_enable: Enables System MMU
+ *
+ * returns -error if an error occurred and System MMU is not enabled,
+ * 0 if the System MMU has been just enabled and 1 if System MMU was already
+ * enabled before.
+ */
+static int __exynos_sysmmu_enable(struct sysmmu_drvdata *data,
+ unsigned long pgtable, struct iommu_domain *domain)
+{
+ int i, ret = 0;
+ unsigned long flags;
+
+ write_lock_irqsave(&data->lock, flags);
+
+ if (!set_sysmmu_active(data)) {
+ if (WARN_ON(pgtable != data->pgtable)) {
+ ret = -EBUSY;
+ set_sysmmu_inactive(data);
+ } else {
+ ret = 1;
+ }
+
+ dev_dbg(data->sysmmu, "(%s) Already enabled\n", data->dbgname);
+ goto finish;
+ }
+
+ if (data->clk[0])
+ clk_enable(data->clk[0]);
+ if (data->clk[1])
+ clk_enable(data->clk[1]);
+
+ data->pgtable = pgtable;
+
+ for (i = 0; i < data->nsfrs; i++) {
+ __sysmmu_set_ptbase(data->sfrbases[i], pgtable);
+
+ if ((readl(data->sfrbases[i] + REG_MMU_VERSION) >> 28) == 3) {
+ /* System MMU version is 3.x */
+ __raw_writel((1 << 12) | (2 << 28),
+ data->sfrbases[i] + REG_MMU_CFG);
+ __sysmmu_set_prefbuf(data->sfrbases[i], 0, -1, 0);
+ __sysmmu_set_prefbuf(data->sfrbases[i], 0, -1, 1);
+ }
+
+ __raw_writel(CTRL_ENABLE, data->sfrbases[i] + REG_MMU_CTRL);
+ }
+
+ data->domain = domain;
+
+ dev_dbg(data->sysmmu, "(%s) Enabled\n", data->dbgname);
+finish:
+ write_unlock_irqrestore(&data->lock, flags);
+
+ return ret;
+}
+
+int exynos_sysmmu_enable(struct device *dev, unsigned long pgtable)
+{
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+ int ret;
+
+ BUG_ON(!memblock_is_memory(pgtable));
+
+ ret = pm_runtime_get_sync(data->sysmmu);
+ if (ret < 0) {
+ dev_dbg(data->sysmmu, "(%s) Failed to enable\n", data->dbgname);
+ return ret;
+ }
+
+ ret = __exynos_sysmmu_enable(data, pgtable, NULL);
+ if (WARN_ON(ret < 0)) {
+ pm_runtime_put(data->sysmmu);
+ dev_err(data->sysmmu,
+ "(%s) Already enabled with page table %#lx\n",
+ data->dbgname, data->pgtable);
+ } else {
+ data->dev = dev;
+ }
+
+ return ret;
+}
+
+bool exynos_sysmmu_disable(struct device *dev)
+{
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+ bool disabled;
+
+ disabled = __exynos_sysmmu_disable(data);
+ pm_runtime_put(data->sysmmu);
+
+ return disabled;
+}
+
+static void sysmmu_tlb_invalidate_entry(struct device *dev, unsigned long iova)
+{
+ unsigned long flags;
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+
+ read_lock_irqsave(&data->lock, flags);
+
+ if (is_sysmmu_active(data)) {
+ int i;
+ for (i = 0; i < data->nsfrs; i++) {
+ if (sysmmu_block(data->sfrbases[i])) {
+ __sysmmu_tlb_invalidate_entry(
+ data->sfrbases[i], iova);
+ sysmmu_unblock(data->sfrbases[i]);
+ }
+ }
+ } else {
+ dev_dbg(data->sysmmu,
+ "(%s) Disabled. Skipping invalidating TLB.\n",
+ data->dbgname);
+ }
+
+ read_unlock_irqrestore(&data->lock, flags);
+}
+
+void exynos_sysmmu_tlb_invalidate(struct device *dev)
+{
+ unsigned long flags;
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+
+ read_lock_irqsave(&data->lock, flags);
+
+ if (is_sysmmu_active(data)) {
+ int i;
+ for (i = 0; i < data->nsfrs; i++) {
+ if (sysmmu_block(data->sfrbases[i])) {
+ __sysmmu_tlb_invalidate(data->sfrbases[i]);
+ sysmmu_unblock(data->sfrbases[i]);
+ }
+ }
+ } else {
+ dev_dbg(data->sysmmu,
+ "(%s) Disabled. Skipping invalidating TLB.\n",
+ data->dbgname);
+ }
+
+ read_unlock_irqrestore(&data->lock, flags);
+}
+
+static int exynos_sysmmu_probe(struct platform_device *pdev)
+{
+ int i, ret;
+ struct device *dev;
+ struct sysmmu_drvdata *data;
+
+ dev = &pdev->dev;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_dbg(dev, "Not enough memory\n");
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ ret = dev_set_drvdata(dev, data);
+ if (ret) {
+ dev_dbg(dev, "Unabled to initialize driver data\n");
+ goto err_init;
+ }
+
+ data->nsfrs = pdev->num_resources / 2;
+ data->sfrbases = kmalloc(sizeof(*data->sfrbases) * data->nsfrs,
+ GFP_KERNEL);
+ if (data->sfrbases == NULL) {
+ dev_dbg(dev, "Not enough memory\n");
+ ret = -ENOMEM;
+ goto err_init;
+ }
+
+ for (i = 0; i < data->nsfrs; i++) {
+ struct resource *res;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res) {
+ dev_dbg(dev, "Unable to find IOMEM region\n");
+ ret = -ENOENT;
+ goto err_res;
+ }
+
+ data->sfrbases[i] = ioremap(res->start, resource_size(res));
+ if (!data->sfrbases[i]) {
+ dev_dbg(dev, "Unable to map IOMEM @ PA:%#x\n",
+ res->start);
+ ret = -ENOENT;
+ goto err_res;
+ }
+ }
+
+ for (i = 0; i < data->nsfrs; i++) {
+ ret = platform_get_irq(pdev, i);
+ if (ret <= 0) {
+ dev_dbg(dev, "Unable to find IRQ resource\n");
+ goto err_irq;
+ }
+
+ ret = request_irq(ret, exynos_sysmmu_irq, 0,
+ dev_name(dev), data);
+ if (ret) {
+ dev_dbg(dev, "Unabled to register interrupt handler\n");
+ goto err_irq;
+ }
+ }
+
+ if (dev_get_platdata(dev)) {
+ char *deli, *beg;
+ struct sysmmu_platform_data *platdata = dev_get_platdata(dev);
+
+ beg = platdata->clockname;
+
+ for (deli = beg; (*deli != '\0') && (*deli != ','); deli++)
+ /* NOTHING */;
+
+ if (*deli == '\0')
+ deli = NULL;
+ else
+ *deli = '\0';
+
+ data->clk[0] = clk_get(dev, beg);
+ if (IS_ERR(data->clk[0])) {
+ data->clk[0] = NULL;
+ dev_dbg(dev, "No clock descriptor registered\n");
+ }
+
+ if (data->clk[0] && deli) {
+ *deli = ',';
+ data->clk[1] = clk_get(dev, deli + 1);
+ if (IS_ERR(data->clk[1]))
+ data->clk[1] = NULL;
+ }
+
+ data->dbgname = platdata->dbgname;
+ }
+
+ data->sysmmu = dev;
+ rwlock_init(&data->lock);
+ INIT_LIST_HEAD(&data->node);
+
+ __set_fault_handler(data, &default_fault_handler);
+
+ if (dev->parent)
+ pm_runtime_enable(dev);
+
+ dev_dbg(dev, "(%s) Initialized\n", data->dbgname);
+ return 0;
+err_irq:
+ while (i-- > 0) {
+ int irq;
+
+ irq = platform_get_irq(pdev, i);
+ free_irq(irq, data);
+ }
+err_res:
+ while (data->nsfrs-- > 0)
+ iounmap(data->sfrbases[data->nsfrs]);
+ kfree(data->sfrbases);
+err_init:
+ kfree(data);
+err_alloc:
+ dev_err(dev, "Failed to initialize\n");
+ return ret;
+}
+
+static struct platform_driver exynos_sysmmu_driver = {
+ .probe = exynos_sysmmu_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "exynos-sysmmu",
+ }
+};
+
+static inline void pgtable_flush(void *vastart, void *vaend)
+{
+ dmac_flush_range(vastart, vaend);
+ outer_flush_range(virt_to_phys(vastart),
+ virt_to_phys(vaend));
+}
+
+static int exynos_iommu_domain_init(struct iommu_domain *domain)
+{
+ struct exynos_iommu_domain *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pgtable = (unsigned long *)__get_free_pages(
+ GFP_KERNEL | __GFP_ZERO, 2);
+ if (!priv->pgtable)
+ goto err_pgtable;
+
+ priv->lv2entcnt = (short *)__get_free_pages(
+ GFP_KERNEL | __GFP_ZERO, 1);
+ if (!priv->lv2entcnt)
+ goto err_counter;
+
+ pgtable_flush(priv->pgtable, priv->pgtable + NUM_LV1ENTRIES);
+
+ spin_lock_init(&priv->lock);
+ spin_lock_init(&priv->pgtablelock);
+ INIT_LIST_HEAD(&priv->clients);
+
+ domain->priv = priv;
+ return 0;
+
+err_counter:
+ free_pages((unsigned long)priv->pgtable, 2);
+err_pgtable:
+ kfree(priv);
+ return -ENOMEM;
+}
+
+static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+ struct sysmmu_drvdata *data;
+ unsigned long flags;
+ int i;
+
+ WARN_ON(!list_empty(&priv->clients));
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ list_for_each_entry(data, &priv->clients, node) {
+ while (!exynos_sysmmu_disable(data->dev))
+ ; /* until System MMU is actually disabled */
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ for (i = 0; i < NUM_LV1ENTRIES; i++)
+ if (lv1ent_page(priv->pgtable + i))
+ kfree(__va(lv2table_base(priv->pgtable + i)));
+
+ free_pages((unsigned long)priv->pgtable, 2);
+ free_pages((unsigned long)priv->lv2entcnt, 1);
+ kfree(domain->priv);
+ domain->priv = NULL;
+}
+
+static int exynos_iommu_attach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+ struct exynos_iommu_domain *priv = domain->priv;
+ unsigned long flags;
+ int ret;
+
+ ret = pm_runtime_get_sync(data->sysmmu);
+ if (ret < 0)
+ return ret;
+
+ ret = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ ret = __exynos_sysmmu_enable(data, __pa(priv->pgtable), domain);
+
+ if (ret == 0) {
+ /* 'data->node' must not be appeared in priv->clients */
+ BUG_ON(!list_empty(&data->node));
+ data->dev = dev;
+ list_add_tail(&data->node, &priv->clients);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (ret < 0) {
+ dev_err(dev, "%s: Failed to attach IOMMU with pgtable %#lx\n",
+ __func__, __pa(priv->pgtable));
+ pm_runtime_put(data->sysmmu);
+ } else if (ret > 0) {
+ dev_dbg(dev, "%s: IOMMU with pgtable 0x%lx already attached\n",
+ __func__, __pa(priv->pgtable));
+ } else {
+ dev_dbg(dev, "%s: Attached new IOMMU with pgtable 0x%lx\n",
+ __func__, __pa(priv->pgtable));
+ }
+
+ return ret;
+}
+
+static void exynos_iommu_detach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct sysmmu_drvdata *data = dev_get_drvdata(dev->archdata.iommu);
+ struct exynos_iommu_domain *priv = domain->priv;
+ struct list_head *pos;
+ unsigned long flags;
+ bool found = false;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ list_for_each(pos, &priv->clients) {
+ if (list_entry(pos, struct sysmmu_drvdata, node) == data) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ goto finish;
+
+ if (__exynos_sysmmu_disable(data)) {
+ dev_dbg(dev, "%s: Detached IOMMU with pgtable %#lx\n",
+ __func__, __pa(priv->pgtable));
+ list_del(&data->node);
+ INIT_LIST_HEAD(&data->node);
+
+ } else {
+ dev_dbg(dev, "%s: Detaching IOMMU with pgtable %#lx delayed",
+ __func__, __pa(priv->pgtable));
+ }
+
+finish:
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (found)
+ pm_runtime_put(data->sysmmu);
+}
+
+static unsigned long *alloc_lv2entry(unsigned long *sent, unsigned long iova,
+ short *pgcounter)
+{
+ if (lv1ent_fault(sent)) {
+ unsigned long *pent;
+
+ pent = kzalloc(LV2TABLE_SIZE, GFP_ATOMIC);
+ BUG_ON((unsigned long)pent & (LV2TABLE_SIZE - 1));
+ if (!pent)
+ return NULL;
+
+ *sent = mk_lv1ent_page(__pa(pent));
+ *pgcounter = NUM_LV2ENTRIES;
+ pgtable_flush(pent, pent + NUM_LV2ENTRIES);
+ pgtable_flush(sent, sent + 1);
+ }
+
+ return page_entry(sent, iova);
+}
+
+static int lv1set_section(unsigned long *sent, phys_addr_t paddr, short *pgcnt)
+{
+ if (lv1ent_section(sent))
+ return -EADDRINUSE;
+
+ if (lv1ent_page(sent)) {
+ if (*pgcnt != NUM_LV2ENTRIES)
+ return -EADDRINUSE;
+
+ kfree(page_entry(sent, 0));
+
+ *pgcnt = 0;
+ }
+
+ *sent = mk_lv1ent_sect(paddr);
+
+ pgtable_flush(sent, sent + 1);
+
+ return 0;
+}
+
+static int lv2set_page(unsigned long *pent, phys_addr_t paddr, size_t size,
+ short *pgcnt)
+{
+ if (size == SPAGE_SIZE) {
+ if (!lv2ent_fault(pent))
+ return -EADDRINUSE;
+
+ *pent = mk_lv2ent_spage(paddr);
+ pgtable_flush(pent, pent + 1);
+ *pgcnt -= 1;
+ } else { /* size == LPAGE_SIZE */
+ int i;
+ for (i = 0; i < SPAGES_PER_LPAGE; i++, pent++) {
+ if (!lv2ent_fault(pent)) {
+ memset(pent, 0, sizeof(*pent) * i);
+ return -EADDRINUSE;
+ }
+
+ *pent = mk_lv2ent_lpage(paddr);
+ }
+ pgtable_flush(pent - SPAGES_PER_LPAGE, pent);
+ *pgcnt -= SPAGES_PER_LPAGE;
+ }
+
+ return 0;
+}
+
+static int exynos_iommu_map(struct iommu_domain *domain, unsigned long iova,
+ phys_addr_t paddr, size_t size, int prot)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+ unsigned long *entry;
+ unsigned long flags;
+ int ret = -ENOMEM;
+
+ BUG_ON(priv->pgtable == NULL);
+
+ spin_lock_irqsave(&priv->pgtablelock, flags);
+
+ entry = section_entry(priv->pgtable, iova);
+
+ if (size == SECT_SIZE) {
+ ret = lv1set_section(entry, paddr,
+ &priv->lv2entcnt[lv1ent_offset(iova)]);
+ } else {
+ unsigned long *pent;
+
+ pent = alloc_lv2entry(entry, iova,
+ &priv->lv2entcnt[lv1ent_offset(iova)]);
+
+ if (!pent)
+ ret = -ENOMEM;
+ else
+ ret = lv2set_page(pent, paddr, size,
+ &priv->lv2entcnt[lv1ent_offset(iova)]);
+ }
+
+ if (ret) {
+ pr_debug("%s: Failed to map iova 0x%lx/0x%x bytes\n",
+ __func__, iova, size);
+ }
+
+ spin_unlock_irqrestore(&priv->pgtablelock, flags);
+
+ return ret;
+}
+
+static size_t exynos_iommu_unmap(struct iommu_domain *domain,
+ unsigned long iova, size_t size)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+ struct sysmmu_drvdata *data;
+ unsigned long flags;
+ unsigned long *ent;
+
+ BUG_ON(priv->pgtable == NULL);
+
+ spin_lock_irqsave(&priv->pgtablelock, flags);
+
+ ent = section_entry(priv->pgtable, iova);
+
+ if (lv1ent_section(ent)) {
+ BUG_ON(size < SECT_SIZE);
+
+ *ent = 0;
+ pgtable_flush(ent, ent + 1);
+ size = SECT_SIZE;
+ goto done;
+ }
+
+ if (unlikely(lv1ent_fault(ent))) {
+ if (size > SECT_SIZE)
+ size = SECT_SIZE;
+ goto done;
+ }
+
+ /* lv1ent_page(sent) == true here */
+
+ ent = page_entry(ent, iova);
+
+ if (unlikely(lv2ent_fault(ent))) {
+ size = SPAGE_SIZE;
+ goto done;
+ }
+
+ if (lv2ent_small(ent)) {
+ *ent = 0;
+ size = SPAGE_SIZE;
+ priv->lv2entcnt[lv1ent_offset(iova)] += 1;
+ goto done;
+ }
+
+ /* lv1ent_large(ent) == true here */
+ BUG_ON(size < LPAGE_SIZE);
+
+ memset(ent, 0, sizeof(*ent) * SPAGES_PER_LPAGE);
+
+ size = LPAGE_SIZE;
+ priv->lv2entcnt[lv1ent_offset(iova)] += SPAGES_PER_LPAGE;
+done:
+ spin_unlock_irqrestore(&priv->pgtablelock, flags);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(data, &priv->clients, node)
+ sysmmu_tlb_invalidate_entry(data->dev, iova);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+
+ return size;
+}
+
+static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
+ unsigned long iova)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+ unsigned long *entry;
+ unsigned long flags;
+ phys_addr_t phys = 0;
+
+ spin_lock_irqsave(&priv->pgtablelock, flags);
+
+ entry = section_entry(priv->pgtable, iova);
+
+ if (lv1ent_section(entry)) {
+ phys = section_phys(entry) + section_offs(iova);
+ } else if (lv1ent_page(entry)) {
+ entry = page_entry(entry, iova);
+
+ if (lv2ent_large(entry))
+ phys = lpage_phys(entry) + lpage_offs(iova);
+ else if (lv2ent_small(entry))
+ phys = spage_phys(entry) + spage_offs(iova);
+ }
+
+ spin_unlock_irqrestore(&priv->pgtablelock, flags);
+
+ return phys;
+}
+
+static struct iommu_ops exynos_iommu_ops = {
+ .domain_init = &exynos_iommu_domain_init,
+ .domain_destroy = &exynos_iommu_domain_destroy,
+ .attach_dev = &exynos_iommu_attach_device,
+ .detach_dev = &exynos_iommu_detach_device,
+ .map = &exynos_iommu_map,
+ .unmap = &exynos_iommu_unmap,
+ .iova_to_phys = &exynos_iommu_iova_to_phys,
+ .pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
+};
+
+static int __init exynos_iommu_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&exynos_sysmmu_driver);
+
+ if (ret == 0)
+ bus_set_iommu(&platform_bus_type, &exynos_iommu_ops);
+
+ return ret;
+}
+subsys_initcall(exynos_iommu_init);
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index bf2fbaa..b12af2f 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1907,6 +1907,15 @@
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
+static inline void unlink_domain_info(struct device_domain_info *info)
+{
+ assert_spin_locked(&device_domain_lock);
+ list_del(&info->link);
+ list_del(&info->global);
+ if (info->dev)
+ info->dev->dev.archdata.iommu = NULL;
+}
+
static void domain_remove_dev_info(struct dmar_domain *domain)
{
struct device_domain_info *info;
@@ -1917,10 +1926,7 @@
while (!list_empty(&domain->devices)) {
info = list_entry(domain->devices.next,
struct device_domain_info, link);
- list_del(&info->link);
- list_del(&info->global);
- if (info->dev)
- info->dev->dev.archdata.iommu = NULL;
+ unlink_domain_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags);
iommu_disable_dev_iotlb(info);
@@ -2287,12 +2293,6 @@
if (!info)
return -ENOMEM;
- ret = domain_context_mapping(domain, pdev, translation);
- if (ret) {
- free_devinfo_mem(info);
- return ret;
- }
-
info->segment = pci_domain_nr(pdev->bus);
info->bus = pdev->bus->number;
info->devfn = pdev->devfn;
@@ -2305,6 +2305,15 @@
pdev->dev.archdata.iommu = info;
spin_unlock_irqrestore(&device_domain_lock, flags);
+ ret = domain_context_mapping(domain, pdev, translation);
+ if (ret) {
+ spin_lock_irqsave(&device_domain_lock, flags);
+ unlink_domain_info(info);
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+ free_devinfo_mem(info);
+ return ret;
+ }
+
return 0;
}
@@ -3728,10 +3737,7 @@
if (info->segment == pci_domain_nr(pdev->bus) &&
info->bus == pdev->bus->number &&
info->devfn == pdev->devfn) {
- list_del(&info->link);
- list_del(&info->global);
- if (info->dev)
- info->dev->dev.archdata.iommu = NULL;
+ unlink_domain_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags);
iommu_disable_dev_iotlb(info);
@@ -3786,11 +3792,7 @@
while (!list_empty(&domain->devices)) {
info = list_entry(domain->devices.next,
struct device_domain_info, link);
- list_del(&info->link);
- list_del(&info->global);
- if (info->dev)
- info->dev->dev.archdata.iommu = NULL;
-
+ unlink_domain_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags1);
iommu_disable_dev_iotlb(info);
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 02d54a05..f13643d 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -511,7 +511,7 @@
/* ipu_csi_init_interface() */
csi_reg_write(mx3_cam, conf, CSI_SENS_CONF);
- clk_enable(mx3_cam->clk);
+ clk_prepare_enable(mx3_cam->clk);
rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
dev_dbg(icd->parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
if (rate)
@@ -552,7 +552,7 @@
*ichan = NULL;
}
- clk_disable(mx3_cam->clk);
+ clk_disable_unprepare(mx3_cam->clk);
mx3_cam->icd = NULL;
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index eeb8cd1..3b9136c 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -19,6 +19,7 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/irq.h>
+#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
@@ -51,6 +52,7 @@
struct device *dev;
struct resource *res;
int irq;
+ struct clk *clk;
int gpio_card_detect;
int gpio_write_protect;
};
@@ -770,6 +772,13 @@
} else
host->irq = irq;
+ /* Not all platforms can gate the clock, so it is not
+ an error if the clock does not exists. */
+ host->clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(host->clk)) {
+ clk_prepare_enable(host->clk);
+ }
+
if (mvsd_data->gpio_card_detect) {
ret = gpio_request(mvsd_data->gpio_card_detect,
DRIVER_NAME " cd");
@@ -854,6 +863,11 @@
mvsd_power_down(host);
iounmap(host->base);
release_resource(host->res);
+
+ if (!IS_ERR(host->clk)) {
+ clk_disable_unprepare(host->clk);
+ clk_put(host->clk);
+ }
mmc_free_host(mmc);
}
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index b2058b4..28ed52d 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -136,7 +136,8 @@
u16 rev_no;
unsigned int cmdat;
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_per;
int clock;
@@ -672,7 +673,7 @@
{
unsigned int divider;
int prescaler = 0;
- unsigned int clk_in = clk_get_rate(host->clk);
+ unsigned int clk_in = clk_get_rate(host->clk_per);
while (prescaler <= 0x800) {
for (divider = 1; divider <= 0xF; divider++) {
@@ -900,12 +901,20 @@
host->res = r;
host->irq = irq;
- host->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(host->clk)) {
- ret = PTR_ERR(host->clk);
+ host->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(host->clk_ipg)) {
+ ret = PTR_ERR(host->clk_ipg);
goto out_iounmap;
}
- clk_enable(host->clk);
+
+ host->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(host->clk_per)) {
+ ret = PTR_ERR(host->clk_per);
+ goto out_iounmap;
+ }
+
+ clk_prepare_enable(host->clk_per);
+ clk_prepare_enable(host->clk_ipg);
mxcmci_softreset(host);
@@ -917,8 +926,8 @@
goto out_clk_put;
}
- mmc->f_min = clk_get_rate(host->clk) >> 16;
- mmc->f_max = clk_get_rate(host->clk) >> 1;
+ mmc->f_min = clk_get_rate(host->clk_per) >> 16;
+ mmc->f_max = clk_get_rate(host->clk_per) >> 1;
/* recommended in data sheet */
writew(0x2db4, host->base + MMC_REG_READ_TO);
@@ -967,8 +976,8 @@
if (host->dma)
dma_release_channel(host->dma);
out_clk_put:
- clk_disable(host->clk);
- clk_put(host->clk);
+ clk_disable_unprepare(host->clk_per);
+ clk_disable_unprepare(host->clk_ipg);
out_iounmap:
iounmap(host->base);
out_free:
@@ -999,8 +1008,8 @@
if (host->dma)
dma_release_channel(host->dma);
- clk_disable(host->clk);
- clk_put(host->clk);
+ clk_disable_unprepare(host->clk_per);
+ clk_disable_unprepare(host->clk_ipg);
release_mem_region(host->res->start, resource_size(host->res));
@@ -1018,7 +1027,8 @@
if (mmc)
ret = mmc_suspend_host(mmc);
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk_per);
+ clk_disable_unprepare(host->clk_ipg);
return ret;
}
@@ -1029,7 +1039,8 @@
struct mxcmci_host *host = mmc_priv(mmc);
int ret = 0;
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk_per);
+ clk_prepare_enable(host->clk_ipg);
if (mmc)
ret = mmc_resume_host(mmc);
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index bb03ddd..34a9026 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -23,6 +23,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
@@ -40,18 +43,15 @@
#include <linux/module.h>
#include <linux/fsl/mxs-dma.h>
#include <linux/pinctrl/consumer.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
+#include <linux/stmp_device.h>
+#include <linux/mmc/mxs-mmc.h>
#define DRIVER_NAME "mxs-mmc"
/* card detect polling timeout */
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
-#define SSP_VERSION_LATEST 4
-#define ssp_is_old() (host->version < SSP_VERSION_LATEST)
+#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
/* SSP registers */
#define HW_SSP_CTRL0 0x000
@@ -86,14 +86,14 @@
#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
-#define HW_SSP_TIMING (ssp_is_old() ? 0x050 : 0x070)
+#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
#define BP_SSP_TIMING_TIMEOUT (16)
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
#define BP_SSP_TIMING_CLOCK_DIVIDE (8)
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
#define BP_SSP_TIMING_CLOCK_RATE (0)
#define BM_SSP_TIMING_CLOCK_RATE (0xff)
-#define HW_SSP_CTRL1 (ssp_is_old() ? 0x060 : 0x080)
+#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
@@ -116,15 +116,13 @@
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
#define BP_SSP_CTRL1_SSP_MODE (0)
#define BM_SSP_CTRL1_SSP_MODE (0xf)
-#define HW_SSP_SDRESP0 (ssp_is_old() ? 0x080 : 0x0a0)
-#define HW_SSP_SDRESP1 (ssp_is_old() ? 0x090 : 0x0b0)
-#define HW_SSP_SDRESP2 (ssp_is_old() ? 0x0a0 : 0x0c0)
-#define HW_SSP_SDRESP3 (ssp_is_old() ? 0x0b0 : 0x0d0)
-#define HW_SSP_STATUS (ssp_is_old() ? 0x0c0 : 0x100)
+#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
-#define HW_SSP_VERSION (cpu_is_mx23() ? 0x110 : 0x130)
-#define BP_SSP_VERSION_MAJOR (24)
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
@@ -139,6 +137,11 @@
#define SSP_PIO_NUM 3
+enum mxs_mmc_id {
+ IMX23_MMC,
+ IMX28_MMC,
+};
+
struct mxs_mmc_host {
struct mmc_host *mmc;
struct mmc_request *mrq;
@@ -146,9 +149,7 @@
struct mmc_data *data;
void __iomem *base;
- int irq;
- struct resource *res;
- struct resource *dma_res;
+ int dma_channel;
struct clk *clk;
unsigned int clk_rate;
@@ -158,32 +159,28 @@
enum dma_transfer_direction slave_dirn;
u32 ssp_pio_words[SSP_PIO_NUM];
- unsigned int version;
+ enum mxs_mmc_id devid;
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
+ int wp_gpio;
};
static int mxs_mmc_get_ro(struct mmc_host *mmc)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
- struct mxs_mmc_platform_data *pdata =
- mmc_dev(host->mmc)->platform_data;
- if (!pdata)
- return -EFAULT;
-
- if (!gpio_is_valid(pdata->wp_gpio))
+ if (!gpio_is_valid(host->wp_gpio))
return -EINVAL;
- return gpio_get_value(pdata->wp_gpio);
+ return gpio_get_value(host->wp_gpio);
}
static int mxs_mmc_get_cd(struct mmc_host *mmc)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
- return !(readl(host->base + HW_SSP_STATUS) &
+ return !(readl(host->base + HW_SSP_STATUS(host)) &
BM_SSP_STATUS_CARD_DETECT);
}
@@ -191,7 +188,7 @@
{
u32 ctrl0, ctrl1;
- mxs_reset_block(host->base);
+ stmp_reset_block(host->base);
ctrl0 = BM_SSP_CTRL0_IGNORE_CRC;
ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) |
@@ -207,7 +204,7 @@
writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
BF_SSP(2, TIMING_CLOCK_DIVIDE) |
BF_SSP(0, TIMING_CLOCK_RATE),
- host->base + HW_SSP_TIMING);
+ host->base + HW_SSP_TIMING(host));
if (host->sdio_irq_en) {
ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
@@ -215,7 +212,7 @@
}
writel(ctrl0, host->base + HW_SSP_CTRL0);
- writel(ctrl1, host->base + HW_SSP_CTRL1);
+ writel(ctrl1, host->base + HW_SSP_CTRL1(host));
}
static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
@@ -229,12 +226,12 @@
if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
if (mmc_resp_type(cmd) & MMC_RSP_136) {
- cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0);
- cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1);
- cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2);
- cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3);
+ cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
+ cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
+ cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
+ cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
} else {
- cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0);
+ cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
}
}
@@ -277,9 +274,9 @@
spin_lock(&host->lock);
- stat = readl(host->base + HW_SSP_CTRL1);
+ stat = readl(host->base + HW_SSP_CTRL1(host));
writel(stat & MXS_MMC_IRQ_BITS,
- host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR);
+ host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
mmc_signal_sdio_irq(host->mmc);
@@ -485,7 +482,7 @@
blocks = 1;
/* xfer count, block size and count need to be set differently */
- if (ssp_is_old()) {
+ if (ssp_is_old(host)) {
ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
@@ -509,10 +506,10 @@
/* set the timeout count */
timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
- val = readl(host->base + HW_SSP_TIMING);
+ val = readl(host->base + HW_SSP_TIMING(host));
val &= ~(BM_SSP_TIMING_TIMEOUT);
val |= BF_SSP(timeout, TIMING_TIMEOUT);
- writel(val, host->base + HW_SSP_TIMING);
+ writel(val, host->base + HW_SSP_TIMING(host));
/* pio */
host->ssp_pio_words[0] = ctrl0;
@@ -598,11 +595,11 @@
ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
- val = readl(host->base + HW_SSP_TIMING);
+ val = readl(host->base + HW_SSP_TIMING(host));
val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
- writel(val, host->base + HW_SSP_TIMING);
+ writel(val, host->base + HW_SSP_TIMING(host));
host->clk_rate = ssp_sck;
@@ -637,18 +634,19 @@
if (enable) {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
- host->base + HW_SSP_CTRL0 + MXS_SET_ADDR);
+ host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1 + MXS_SET_ADDR);
+ host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
- if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
+ if (readl(host->base + HW_SSP_STATUS(host)) &
+ BM_SSP_STATUS_SDIO_IRQ)
mmc_signal_sdio_irq(host->mmc);
} else {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
- host->base + HW_SSP_CTRL0 + MXS_CLR_ADDR);
+ host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR);
+ host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
}
spin_unlock_irqrestore(&host->lock, flags);
@@ -669,7 +667,7 @@
if (!mxs_dma_is_apbh(chan))
return false;
- if (chan->chan_id != host->dma_res->start)
+ if (chan->chan_id != host->dma_channel)
return false;
chan->private = &host->dma_data;
@@ -677,11 +675,34 @@
return true;
}
+static struct platform_device_id mxs_mmc_ids[] = {
+ {
+ .name = "imx23-mmc",
+ .driver_data = IMX23_MMC,
+ }, {
+ .name = "imx28-mmc",
+ .driver_data = IMX28_MMC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxs_mmc_ids);
+
+static const struct of_device_id mxs_mmc_dt_ids[] = {
+ { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_MMC, },
+ { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_MMC, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
+
static int mxs_mmc_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(mxs_mmc_dt_ids, &pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
struct mxs_mmc_host *host;
struct mmc_host *mmc;
- struct resource *iores, *dmares, *r;
+ struct resource *iores, *dmares;
struct mxs_mmc_platform_data *pdata;
struct pinctrl *pinctrl;
int ret = 0, irq_err, irq_dma;
@@ -691,46 +712,51 @@
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
irq_err = platform_get_irq(pdev, 0);
irq_dma = platform_get_irq(pdev, 1);
- if (!iores || !dmares || irq_err < 0 || irq_dma < 0)
+ if (!iores || irq_err < 0 || irq_dma < 0)
return -EINVAL;
- r = request_mem_region(iores->start, resource_size(iores), pdev->name);
- if (!r)
- return -EBUSY;
-
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto out_release_mem;
- }
+ if (!mmc)
+ return -ENOMEM;
host = mmc_priv(mmc);
- host->base = ioremap(r->start, resource_size(r));
+ host->base = devm_request_and_ioremap(&pdev->dev, iores);
if (!host->base) {
- ret = -ENOMEM;
+ ret = -EADDRNOTAVAIL;
goto out_mmc_free;
}
- /* only major verion does matter */
- host->version = readl(host->base + HW_SSP_VERSION) >>
- BP_SSP_VERSION_MAJOR;
+ if (np) {
+ host->devid = (enum mxs_mmc_id) of_id->data;
+ /*
+ * TODO: This is a temporary solution and should be changed
+ * to use generic DMA binding later when the helpers get in.
+ */
+ ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
+ &host->dma_channel);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to get dma channel\n");
+ goto out_mmc_free;
+ }
+ } else {
+ host->devid = pdev->id_entry->driver_data;
+ host->dma_channel = dmares->start;
+ }
host->mmc = mmc;
- host->res = r;
- host->dma_res = dmares;
- host->irq = irq_err;
host->sdio_irq_en = 0;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
- goto out_iounmap;
+ goto out_mmc_free;
}
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
- goto out_iounmap;
+ goto out_mmc_free;
}
clk_prepare_enable(host->clk);
@@ -752,11 +778,20 @@
MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
pdata = mmc_dev(host->mmc)->platform_data;
- if (pdata) {
+ if (!pdata) {
+ u32 bus_width = 0;
+ of_property_read_u32(np, "bus-width", &bus_width);
+ if (bus_width == 4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ else if (bus_width == 8)
+ mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ host->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+ } else {
if (pdata->flags & SLOTF_8_BIT_CAPABLE)
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
if (pdata->flags & SLOTF_4_BIT_CAPABLE)
mmc->caps |= MMC_CAP_4_BIT_DATA;
+ host->wp_gpio = pdata->wp_gpio;
}
mmc->f_min = 400000;
@@ -765,13 +800,14 @@
mmc->max_segs = 52;
mmc->max_blk_size = 1 << 0xf;
- mmc->max_blk_count = (ssp_is_old()) ? 0xff : 0xffffff;
- mmc->max_req_size = (ssp_is_old()) ? 0xffff : 0xffffffff;
+ mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
+ mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
platform_set_drvdata(pdev, mmc);
- ret = request_irq(host->irq, mxs_mmc_irq_handler, 0, DRIVER_NAME, host);
+ ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
+ DRIVER_NAME, host);
if (ret)
goto out_free_dma;
@@ -779,26 +815,20 @@
ret = mmc_add_host(mmc);
if (ret)
- goto out_free_irq;
+ goto out_free_dma;
dev_info(mmc_dev(host->mmc), "initialized\n");
return 0;
-out_free_irq:
- free_irq(host->irq, host);
out_free_dma:
if (host->dmach)
dma_release_channel(host->dmach);
out_clk_put:
clk_disable_unprepare(host->clk);
clk_put(host->clk);
-out_iounmap:
- iounmap(host->base);
out_mmc_free:
mmc_free_host(mmc);
-out_release_mem:
- release_mem_region(iores->start, resource_size(iores));
return ret;
}
@@ -806,12 +836,9 @@
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct mxs_mmc_host *host = mmc_priv(mmc);
- struct resource *res = host->res;
mmc_remove_host(mmc);
- free_irq(host->irq, host);
-
platform_set_drvdata(pdev, NULL);
if (host->dmach)
@@ -820,12 +847,8 @@
clk_disable_unprepare(host->clk);
clk_put(host->clk);
- iounmap(host->base);
-
mmc_free_host(mmc);
- release_mem_region(res->start, resource_size(res));
-
return 0;
}
@@ -865,11 +888,13 @@
static struct platform_driver mxs_mmc_driver = {
.probe = mxs_mmc_probe,
.remove = mxs_mmc_remove,
+ .id_table = mxs_mmc_ids,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
+ .of_match_table = mxs_mmc_dt_ids,
#endif
},
};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index a9fc714..9a7a60a 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1781,7 +1781,7 @@
pdata->slots[0].nonremovable = true;
pdata->slots[0].no_regulator_off_init = true;
}
- of_property_read_u32(np, "ti,bus-width", &bus_width);
+ of_property_read_u32(np, "bus-width", &bus_width);
if (bus_width == 4)
pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index d190d04..ebbe984 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -71,6 +71,9 @@
enum imx_esdhc_type devtype;
struct pinctrl *pinctrl;
struct esdhc_platform_data boarddata;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
};
static struct platform_device_id imx_esdhc_devtype[] = {
@@ -404,7 +407,7 @@
if (!np)
return -ENODEV;
- if (of_get_property(np, "fsl,card-wired", NULL))
+ if (of_get_property(np, "non-removable", NULL))
boarddata->cd_type = ESDHC_CD_PERMANENT;
if (of_get_property(np, "fsl,cd-controller", NULL))
@@ -439,7 +442,6 @@
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_host *host;
struct esdhc_platform_data *boarddata;
- struct clk *clk;
int err;
struct pltfm_imx_data *imx_data;
@@ -460,14 +462,29 @@
imx_data->devtype = pdev->id_entry->driver_data;
pltfm_host->priv = imx_data;
- clk = clk_get(mmc_dev(host->mmc), NULL);
- if (IS_ERR(clk)) {
- dev_err(mmc_dev(host->mmc), "clk err\n");
- err = PTR_ERR(clk);
+ imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(imx_data->clk_ipg)) {
+ err = PTR_ERR(imx_data->clk_ipg);
goto err_clk_get;
}
- clk_prepare_enable(clk);
- pltfm_host->clk = clk;
+
+ imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(imx_data->clk_ahb)) {
+ err = PTR_ERR(imx_data->clk_ahb);
+ goto err_clk_get;
+ }
+
+ imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(imx_data->clk_per)) {
+ err = PTR_ERR(imx_data->clk_per);
+ goto err_clk_get;
+ }
+
+ pltfm_host->clk = imx_data->clk_per;
+
+ clk_prepare_enable(imx_data->clk_per);
+ clk_prepare_enable(imx_data->clk_ipg);
+ clk_prepare_enable(imx_data->clk_ahb);
imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(imx_data->pinctrl)) {
@@ -567,8 +584,9 @@
no_card_detect_pin:
no_board_data:
pin_err:
- clk_disable_unprepare(pltfm_host->clk);
- clk_put(pltfm_host->clk);
+ clk_disable_unprepare(imx_data->clk_per);
+ clk_disable_unprepare(imx_data->clk_ipg);
+ clk_disable_unprepare(imx_data->clk_ahb);
err_clk_get:
kfree(imx_data);
err_imx_data:
@@ -594,8 +612,10 @@
gpio_free(boarddata->cd_gpio);
}
- clk_disable_unprepare(pltfm_host->clk);
- clk_put(pltfm_host->clk);
+ clk_disable_unprepare(imx_data->clk_per);
+ clk_disable_unprepare(imx_data->clk_ipg);
+ clk_disable_unprepare(imx_data->clk_ahb);
+
kfree(imx_data);
sdhci_pltfm_free(pdev);
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index c5c2a48..d9a4ef4 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -42,7 +42,8 @@
#ifdef CONFIG_OF
static bool sdhci_of_wp_inverted(struct device_node *np)
{
- if (of_get_property(np, "sdhci,wp-inverted", NULL))
+ if (of_get_property(np, "sdhci,wp-inverted", NULL) ||
+ of_get_property(np, "wp-inverted", NULL))
return true;
/* Old device trees don't have the wp-inverted property. */
@@ -59,13 +60,16 @@
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
const __be32 *clk;
+ u32 bus_width;
int size;
if (of_device_is_available(np)) {
if (of_get_property(np, "sdhci,auto-cmd12", NULL))
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
- if (of_get_property(np, "sdhci,1-bit-only", NULL))
+ if (of_get_property(np, "sdhci,1-bit-only", NULL) ||
+ (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+ bus_width == 1))
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
if (sdhci_of_wp_inverted(np))
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index cc0678a..9e374e9 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -690,7 +690,7 @@
if (chip == -1) {
/* Disable the NFC clock */
if (host->clk_act) {
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
host->clk_act = 0;
}
return;
@@ -698,7 +698,7 @@
if (!host->clk_act) {
/* Enable the NFC clock */
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
host->clk_act = 1;
}
@@ -1078,7 +1078,7 @@
goto eclk;
}
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
host->clk_act = 1;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 0f50ef3..513dc88 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -17,6 +17,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
@@ -79,6 +81,7 @@
struct nand_chip *nc;
struct orion_nand_data *board;
struct resource *res;
+ struct clk *clk;
void __iomem *io_base;
int ret = 0;
u32 val = 0;
@@ -155,6 +158,14 @@
platform_set_drvdata(pdev, mtd);
+ /* Not all platforms can gate the clock, so it is not
+ an error if the clock does not exists. */
+ clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+
if (nand_scan(mtd, 1)) {
ret = -ENXIO;
goto no_dev;
@@ -184,6 +195,7 @@
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct nand_chip *nc = mtd->priv;
+ struct clk *clk;
nand_release(mtd);
@@ -191,6 +203,12 @@
kfree(nc);
+ clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+ }
+
return 0;
}
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 8f2cf8c..ff7f4c5 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -207,7 +207,8 @@
struct net_device *netdev;
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE];
@@ -1065,7 +1066,7 @@
* Reference Manual has an error on this, and gets fixed on i.MX6Q
* document.
*/
- fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000);
+ fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ahb), 5000000);
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
fep->phy_speed--;
fep->phy_speed <<= 1;
@@ -1618,12 +1619,20 @@
goto failed_pin;
}
- fep->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(fep->clk)) {
- ret = PTR_ERR(fep->clk);
+ fep->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(fep->clk_ipg)) {
+ ret = PTR_ERR(fep->clk_ipg);
goto failed_clk;
}
- clk_prepare_enable(fep->clk);
+
+ fep->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(fep->clk_ahb)) {
+ ret = PTR_ERR(fep->clk_ahb);
+ goto failed_clk;
+ }
+
+ clk_prepare_enable(fep->clk_ahb);
+ clk_prepare_enable(fep->clk_ipg);
ret = fec_enet_init(ndev);
if (ret)
@@ -1646,8 +1655,8 @@
fec_enet_mii_remove(fep);
failed_mii_init:
failed_init:
- clk_disable_unprepare(fep->clk);
- clk_put(fep->clk);
+ clk_disable_unprepare(fep->clk_ahb);
+ clk_disable_unprepare(fep->clk_ipg);
failed_pin:
failed_clk:
for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1680,8 +1689,8 @@
if (irq > 0)
free_irq(irq, ndev);
}
- clk_disable_unprepare(fep->clk);
- clk_put(fep->clk);
+ clk_disable_unprepare(fep->clk_ahb);
+ clk_disable_unprepare(fep->clk_ipg);
iounmap(fep->hwp);
free_netdev(ndev);
@@ -1705,7 +1714,8 @@
fec_stop(ndev);
netif_device_detach(ndev);
}
- clk_disable_unprepare(fep->clk);
+ clk_disable_unprepare(fep->clk_ahb);
+ clk_disable_unprepare(fep->clk_ipg);
return 0;
}
@@ -1716,7 +1726,8 @@
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
- clk_prepare_enable(fep->clk);
+ clk_prepare_enable(fep->clk_ahb);
+ clk_prepare_enable(fep->clk_ipg);
if (netif_running(ndev)) {
fec_restart(ndev, fep->full_duplex);
netif_device_attach(ndev);
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index c8950da..04d901d 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -57,6 +57,7 @@
#include <linux/types.h>
#include <linux/inet_lro.h>
#include <linux/slab.h>
+#include <linux/clk.h>
static char mv643xx_eth_driver_name[] = "mv643xx_eth";
static char mv643xx_eth_driver_version[] = "1.4";
@@ -289,10 +290,10 @@
/*
* Hardware-specific parameters.
*/
- unsigned int t_clk;
int extended_rx_coal_limit;
int tx_bw_control;
int tx_csum_limit;
+
};
#define TX_BW_CONTROL_ABSENT 0
@@ -431,6 +432,12 @@
int tx_desc_sram_size;
int txq_count;
struct tx_queue txq[8];
+
+ /*
+ * Hardware-specific parameters.
+ */
+ struct clk *clk;
+ unsigned int t_clk;
};
@@ -1010,7 +1017,7 @@
int mtu;
int bucket_size;
- token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
+ token_rate = ((rate / 1000) * 64) / (mp->t_clk / 1000);
if (token_rate > 1023)
token_rate = 1023;
@@ -1042,7 +1049,7 @@
int token_rate;
int bucket_size;
- token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
+ token_rate = ((rate / 1000) * 64) / (mp->t_clk / 1000);
if (token_rate > 1023)
token_rate = 1023;
@@ -1309,7 +1316,7 @@
temp = (val & 0x003fff00) >> 8;
temp *= 64000000;
- do_div(temp, mp->shared->t_clk);
+ do_div(temp, mp->t_clk);
return (unsigned int)temp;
}
@@ -1319,7 +1326,7 @@
u64 temp;
u32 val;
- temp = (u64)usec * mp->shared->t_clk;
+ temp = (u64)usec * mp->t_clk;
temp += 31999999;
do_div(temp, 64000000);
@@ -1345,7 +1352,7 @@
temp = (rdlp(mp, TX_FIFO_URGENT_THRESHOLD) & 0x3fff0) >> 4;
temp *= 64000000;
- do_div(temp, mp->shared->t_clk);
+ do_div(temp, mp->t_clk);
return (unsigned int)temp;
}
@@ -1354,7 +1361,7 @@
{
u64 temp;
- temp = (u64)usec * mp->shared->t_clk;
+ temp = (u64)usec * mp->t_clk;
temp += 31999999;
do_div(temp, 64000000);
@@ -2663,10 +2670,6 @@
if (dram)
mv643xx_eth_conf_mbus_windows(msp, dram);
- /*
- * Detect hardware parameters.
- */
- msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
pd->tx_csum_limit : 9 * 1024;
infer_hw_params(msp);
@@ -2891,6 +2894,18 @@
mp->dev = dev;
+ /*
+ * Get the clk rate, if there is one, otherwise use the default.
+ */
+ mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0"));
+ if (!IS_ERR(mp->clk)) {
+ clk_prepare_enable(mp->clk);
+ mp->t_clk = clk_get_rate(mp->clk);
+ } else {
+ mp->t_clk = 133000000;
+ printk(KERN_WARNING "Unable to get clock");
+ }
+
set_params(mp, pd);
netif_set_real_num_tx_queues(dev, mp->txq_count);
netif_set_real_num_rx_queues(dev, mp->rxq_count);
@@ -2979,6 +2994,11 @@
if (mp->phy != NULL)
phy_detach(mp->phy);
cancel_work_sync(&mp->tx_timeout_task);
+
+ if (!IS_ERR(mp->clk)) {
+ clk_disable_unprepare(mp->clk);
+ clk_put(mp->clk);
+ }
free_netdev(mp->dev);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index b42252c..1b173a6 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -51,7 +51,7 @@
config TI_CPSW
tristate "TI CPSW Switch Support"
- depends on ARM && (ARCH_DAVINCI || SOC_OMAPAM33XX)
+ depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
select TI_DAVINCI_CPDMA
select TI_DAVINCI_MDIO
---help---
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index f37fbeb..1e173f3 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -90,8 +90,22 @@
if (!dev)
return NULL;
- return to_i2c_client(dev);
+ return i2c_verify_client(dev);
}
EXPORT_SYMBOL(of_find_i2c_device_by_node);
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+
MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig
index 6a2596b..91558791 100644
--- a/drivers/pinctrl/spear/Kconfig
+++ b/drivers/pinctrl/spear/Kconfig
@@ -31,4 +31,14 @@
depends on MACH_SPEAR320
select PINCTRL_SPEAR3XX
+config PINCTRL_SPEAR1310
+ bool "ST Microelectronics SPEAr1310 SoC pin controller driver"
+ depends on MACH_SPEAR1310
+ select PINCTRL_SPEAR
+
+config PINCTRL_SPEAR1340
+ bool "ST Microelectronics SPEAr1340 SoC pin controller driver"
+ depends on MACH_SPEAR1340
+ select PINCTRL_SPEAR
+
endif
diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile
index 15dcb85..b28a7ba 100644
--- a/drivers/pinctrl/spear/Makefile
+++ b/drivers/pinctrl/spear/Makefile
@@ -5,3 +5,5 @@
obj-$(CONFIG_PINCTRL_SPEAR300) += pinctrl-spear300.o
obj-$(CONFIG_PINCTRL_SPEAR310) += pinctrl-spear310.o
obj-$(CONFIG_PINCTRL_SPEAR320) += pinctrl-spear320.o
+obj-$(CONFIG_PINCTRL_SPEAR1310) += pinctrl-spear1310.o
+obj-$(CONFIG_PINCTRL_SPEAR1340) += pinctrl-spear1340.o
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index 47a6b5b..9155783 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -139,4 +139,255 @@
int __devinit spear_pinctrl_probe(struct platform_device *pdev,
struct spear_pinctrl_machdata *machdata);
int __devexit spear_pinctrl_remove(struct platform_device *pdev);
+
+#define SPEAR_PIN_0_TO_101 \
+ PINCTRL_PIN(0, "PLGPIO0"), \
+ PINCTRL_PIN(1, "PLGPIO1"), \
+ PINCTRL_PIN(2, "PLGPIO2"), \
+ PINCTRL_PIN(3, "PLGPIO3"), \
+ PINCTRL_PIN(4, "PLGPIO4"), \
+ PINCTRL_PIN(5, "PLGPIO5"), \
+ PINCTRL_PIN(6, "PLGPIO6"), \
+ PINCTRL_PIN(7, "PLGPIO7"), \
+ PINCTRL_PIN(8, "PLGPIO8"), \
+ PINCTRL_PIN(9, "PLGPIO9"), \
+ PINCTRL_PIN(10, "PLGPIO10"), \
+ PINCTRL_PIN(11, "PLGPIO11"), \
+ PINCTRL_PIN(12, "PLGPIO12"), \
+ PINCTRL_PIN(13, "PLGPIO13"), \
+ PINCTRL_PIN(14, "PLGPIO14"), \
+ PINCTRL_PIN(15, "PLGPIO15"), \
+ PINCTRL_PIN(16, "PLGPIO16"), \
+ PINCTRL_PIN(17, "PLGPIO17"), \
+ PINCTRL_PIN(18, "PLGPIO18"), \
+ PINCTRL_PIN(19, "PLGPIO19"), \
+ PINCTRL_PIN(20, "PLGPIO20"), \
+ PINCTRL_PIN(21, "PLGPIO21"), \
+ PINCTRL_PIN(22, "PLGPIO22"), \
+ PINCTRL_PIN(23, "PLGPIO23"), \
+ PINCTRL_PIN(24, "PLGPIO24"), \
+ PINCTRL_PIN(25, "PLGPIO25"), \
+ PINCTRL_PIN(26, "PLGPIO26"), \
+ PINCTRL_PIN(27, "PLGPIO27"), \
+ PINCTRL_PIN(28, "PLGPIO28"), \
+ PINCTRL_PIN(29, "PLGPIO29"), \
+ PINCTRL_PIN(30, "PLGPIO30"), \
+ PINCTRL_PIN(31, "PLGPIO31"), \
+ PINCTRL_PIN(32, "PLGPIO32"), \
+ PINCTRL_PIN(33, "PLGPIO33"), \
+ PINCTRL_PIN(34, "PLGPIO34"), \
+ PINCTRL_PIN(35, "PLGPIO35"), \
+ PINCTRL_PIN(36, "PLGPIO36"), \
+ PINCTRL_PIN(37, "PLGPIO37"), \
+ PINCTRL_PIN(38, "PLGPIO38"), \
+ PINCTRL_PIN(39, "PLGPIO39"), \
+ PINCTRL_PIN(40, "PLGPIO40"), \
+ PINCTRL_PIN(41, "PLGPIO41"), \
+ PINCTRL_PIN(42, "PLGPIO42"), \
+ PINCTRL_PIN(43, "PLGPIO43"), \
+ PINCTRL_PIN(44, "PLGPIO44"), \
+ PINCTRL_PIN(45, "PLGPIO45"), \
+ PINCTRL_PIN(46, "PLGPIO46"), \
+ PINCTRL_PIN(47, "PLGPIO47"), \
+ PINCTRL_PIN(48, "PLGPIO48"), \
+ PINCTRL_PIN(49, "PLGPIO49"), \
+ PINCTRL_PIN(50, "PLGPIO50"), \
+ PINCTRL_PIN(51, "PLGPIO51"), \
+ PINCTRL_PIN(52, "PLGPIO52"), \
+ PINCTRL_PIN(53, "PLGPIO53"), \
+ PINCTRL_PIN(54, "PLGPIO54"), \
+ PINCTRL_PIN(55, "PLGPIO55"), \
+ PINCTRL_PIN(56, "PLGPIO56"), \
+ PINCTRL_PIN(57, "PLGPIO57"), \
+ PINCTRL_PIN(58, "PLGPIO58"), \
+ PINCTRL_PIN(59, "PLGPIO59"), \
+ PINCTRL_PIN(60, "PLGPIO60"), \
+ PINCTRL_PIN(61, "PLGPIO61"), \
+ PINCTRL_PIN(62, "PLGPIO62"), \
+ PINCTRL_PIN(63, "PLGPIO63"), \
+ PINCTRL_PIN(64, "PLGPIO64"), \
+ PINCTRL_PIN(65, "PLGPIO65"), \
+ PINCTRL_PIN(66, "PLGPIO66"), \
+ PINCTRL_PIN(67, "PLGPIO67"), \
+ PINCTRL_PIN(68, "PLGPIO68"), \
+ PINCTRL_PIN(69, "PLGPIO69"), \
+ PINCTRL_PIN(70, "PLGPIO70"), \
+ PINCTRL_PIN(71, "PLGPIO71"), \
+ PINCTRL_PIN(72, "PLGPIO72"), \
+ PINCTRL_PIN(73, "PLGPIO73"), \
+ PINCTRL_PIN(74, "PLGPIO74"), \
+ PINCTRL_PIN(75, "PLGPIO75"), \
+ PINCTRL_PIN(76, "PLGPIO76"), \
+ PINCTRL_PIN(77, "PLGPIO77"), \
+ PINCTRL_PIN(78, "PLGPIO78"), \
+ PINCTRL_PIN(79, "PLGPIO79"), \
+ PINCTRL_PIN(80, "PLGPIO80"), \
+ PINCTRL_PIN(81, "PLGPIO81"), \
+ PINCTRL_PIN(82, "PLGPIO82"), \
+ PINCTRL_PIN(83, "PLGPIO83"), \
+ PINCTRL_PIN(84, "PLGPIO84"), \
+ PINCTRL_PIN(85, "PLGPIO85"), \
+ PINCTRL_PIN(86, "PLGPIO86"), \
+ PINCTRL_PIN(87, "PLGPIO87"), \
+ PINCTRL_PIN(88, "PLGPIO88"), \
+ PINCTRL_PIN(89, "PLGPIO89"), \
+ PINCTRL_PIN(90, "PLGPIO90"), \
+ PINCTRL_PIN(91, "PLGPIO91"), \
+ PINCTRL_PIN(92, "PLGPIO92"), \
+ PINCTRL_PIN(93, "PLGPIO93"), \
+ PINCTRL_PIN(94, "PLGPIO94"), \
+ PINCTRL_PIN(95, "PLGPIO95"), \
+ PINCTRL_PIN(96, "PLGPIO96"), \
+ PINCTRL_PIN(97, "PLGPIO97"), \
+ PINCTRL_PIN(98, "PLGPIO98"), \
+ PINCTRL_PIN(99, "PLGPIO99"), \
+ PINCTRL_PIN(100, "PLGPIO100"), \
+ PINCTRL_PIN(101, "PLGPIO101")
+
+#define SPEAR_PIN_102_TO_245 \
+ PINCTRL_PIN(102, "PLGPIO102"), \
+ PINCTRL_PIN(103, "PLGPIO103"), \
+ PINCTRL_PIN(104, "PLGPIO104"), \
+ PINCTRL_PIN(105, "PLGPIO105"), \
+ PINCTRL_PIN(106, "PLGPIO106"), \
+ PINCTRL_PIN(107, "PLGPIO107"), \
+ PINCTRL_PIN(108, "PLGPIO108"), \
+ PINCTRL_PIN(109, "PLGPIO109"), \
+ PINCTRL_PIN(110, "PLGPIO110"), \
+ PINCTRL_PIN(111, "PLGPIO111"), \
+ PINCTRL_PIN(112, "PLGPIO112"), \
+ PINCTRL_PIN(113, "PLGPIO113"), \
+ PINCTRL_PIN(114, "PLGPIO114"), \
+ PINCTRL_PIN(115, "PLGPIO115"), \
+ PINCTRL_PIN(116, "PLGPIO116"), \
+ PINCTRL_PIN(117, "PLGPIO117"), \
+ PINCTRL_PIN(118, "PLGPIO118"), \
+ PINCTRL_PIN(119, "PLGPIO119"), \
+ PINCTRL_PIN(120, "PLGPIO120"), \
+ PINCTRL_PIN(121, "PLGPIO121"), \
+ PINCTRL_PIN(122, "PLGPIO122"), \
+ PINCTRL_PIN(123, "PLGPIO123"), \
+ PINCTRL_PIN(124, "PLGPIO124"), \
+ PINCTRL_PIN(125, "PLGPIO125"), \
+ PINCTRL_PIN(126, "PLGPIO126"), \
+ PINCTRL_PIN(127, "PLGPIO127"), \
+ PINCTRL_PIN(128, "PLGPIO128"), \
+ PINCTRL_PIN(129, "PLGPIO129"), \
+ PINCTRL_PIN(130, "PLGPIO130"), \
+ PINCTRL_PIN(131, "PLGPIO131"), \
+ PINCTRL_PIN(132, "PLGPIO132"), \
+ PINCTRL_PIN(133, "PLGPIO133"), \
+ PINCTRL_PIN(134, "PLGPIO134"), \
+ PINCTRL_PIN(135, "PLGPIO135"), \
+ PINCTRL_PIN(136, "PLGPIO136"), \
+ PINCTRL_PIN(137, "PLGPIO137"), \
+ PINCTRL_PIN(138, "PLGPIO138"), \
+ PINCTRL_PIN(139, "PLGPIO139"), \
+ PINCTRL_PIN(140, "PLGPIO140"), \
+ PINCTRL_PIN(141, "PLGPIO141"), \
+ PINCTRL_PIN(142, "PLGPIO142"), \
+ PINCTRL_PIN(143, "PLGPIO143"), \
+ PINCTRL_PIN(144, "PLGPIO144"), \
+ PINCTRL_PIN(145, "PLGPIO145"), \
+ PINCTRL_PIN(146, "PLGPIO146"), \
+ PINCTRL_PIN(147, "PLGPIO147"), \
+ PINCTRL_PIN(148, "PLGPIO148"), \
+ PINCTRL_PIN(149, "PLGPIO149"), \
+ PINCTRL_PIN(150, "PLGPIO150"), \
+ PINCTRL_PIN(151, "PLGPIO151"), \
+ PINCTRL_PIN(152, "PLGPIO152"), \
+ PINCTRL_PIN(153, "PLGPIO153"), \
+ PINCTRL_PIN(154, "PLGPIO154"), \
+ PINCTRL_PIN(155, "PLGPIO155"), \
+ PINCTRL_PIN(156, "PLGPIO156"), \
+ PINCTRL_PIN(157, "PLGPIO157"), \
+ PINCTRL_PIN(158, "PLGPIO158"), \
+ PINCTRL_PIN(159, "PLGPIO159"), \
+ PINCTRL_PIN(160, "PLGPIO160"), \
+ PINCTRL_PIN(161, "PLGPIO161"), \
+ PINCTRL_PIN(162, "PLGPIO162"), \
+ PINCTRL_PIN(163, "PLGPIO163"), \
+ PINCTRL_PIN(164, "PLGPIO164"), \
+ PINCTRL_PIN(165, "PLGPIO165"), \
+ PINCTRL_PIN(166, "PLGPIO166"), \
+ PINCTRL_PIN(167, "PLGPIO167"), \
+ PINCTRL_PIN(168, "PLGPIO168"), \
+ PINCTRL_PIN(169, "PLGPIO169"), \
+ PINCTRL_PIN(170, "PLGPIO170"), \
+ PINCTRL_PIN(171, "PLGPIO171"), \
+ PINCTRL_PIN(172, "PLGPIO172"), \
+ PINCTRL_PIN(173, "PLGPIO173"), \
+ PINCTRL_PIN(174, "PLGPIO174"), \
+ PINCTRL_PIN(175, "PLGPIO175"), \
+ PINCTRL_PIN(176, "PLGPIO176"), \
+ PINCTRL_PIN(177, "PLGPIO177"), \
+ PINCTRL_PIN(178, "PLGPIO178"), \
+ PINCTRL_PIN(179, "PLGPIO179"), \
+ PINCTRL_PIN(180, "PLGPIO180"), \
+ PINCTRL_PIN(181, "PLGPIO181"), \
+ PINCTRL_PIN(182, "PLGPIO182"), \
+ PINCTRL_PIN(183, "PLGPIO183"), \
+ PINCTRL_PIN(184, "PLGPIO184"), \
+ PINCTRL_PIN(185, "PLGPIO185"), \
+ PINCTRL_PIN(186, "PLGPIO186"), \
+ PINCTRL_PIN(187, "PLGPIO187"), \
+ PINCTRL_PIN(188, "PLGPIO188"), \
+ PINCTRL_PIN(189, "PLGPIO189"), \
+ PINCTRL_PIN(190, "PLGPIO190"), \
+ PINCTRL_PIN(191, "PLGPIO191"), \
+ PINCTRL_PIN(192, "PLGPIO192"), \
+ PINCTRL_PIN(193, "PLGPIO193"), \
+ PINCTRL_PIN(194, "PLGPIO194"), \
+ PINCTRL_PIN(195, "PLGPIO195"), \
+ PINCTRL_PIN(196, "PLGPIO196"), \
+ PINCTRL_PIN(197, "PLGPIO197"), \
+ PINCTRL_PIN(198, "PLGPIO198"), \
+ PINCTRL_PIN(199, "PLGPIO199"), \
+ PINCTRL_PIN(200, "PLGPIO200"), \
+ PINCTRL_PIN(201, "PLGPIO201"), \
+ PINCTRL_PIN(202, "PLGPIO202"), \
+ PINCTRL_PIN(203, "PLGPIO203"), \
+ PINCTRL_PIN(204, "PLGPIO204"), \
+ PINCTRL_PIN(205, "PLGPIO205"), \
+ PINCTRL_PIN(206, "PLGPIO206"), \
+ PINCTRL_PIN(207, "PLGPIO207"), \
+ PINCTRL_PIN(208, "PLGPIO208"), \
+ PINCTRL_PIN(209, "PLGPIO209"), \
+ PINCTRL_PIN(210, "PLGPIO210"), \
+ PINCTRL_PIN(211, "PLGPIO211"), \
+ PINCTRL_PIN(212, "PLGPIO212"), \
+ PINCTRL_PIN(213, "PLGPIO213"), \
+ PINCTRL_PIN(214, "PLGPIO214"), \
+ PINCTRL_PIN(215, "PLGPIO215"), \
+ PINCTRL_PIN(216, "PLGPIO216"), \
+ PINCTRL_PIN(217, "PLGPIO217"), \
+ PINCTRL_PIN(218, "PLGPIO218"), \
+ PINCTRL_PIN(219, "PLGPIO219"), \
+ PINCTRL_PIN(220, "PLGPIO220"), \
+ PINCTRL_PIN(221, "PLGPIO221"), \
+ PINCTRL_PIN(222, "PLGPIO222"), \
+ PINCTRL_PIN(223, "PLGPIO223"), \
+ PINCTRL_PIN(224, "PLGPIO224"), \
+ PINCTRL_PIN(225, "PLGPIO225"), \
+ PINCTRL_PIN(226, "PLGPIO226"), \
+ PINCTRL_PIN(227, "PLGPIO227"), \
+ PINCTRL_PIN(228, "PLGPIO228"), \
+ PINCTRL_PIN(229, "PLGPIO229"), \
+ PINCTRL_PIN(230, "PLGPIO230"), \
+ PINCTRL_PIN(231, "PLGPIO231"), \
+ PINCTRL_PIN(232, "PLGPIO232"), \
+ PINCTRL_PIN(233, "PLGPIO233"), \
+ PINCTRL_PIN(234, "PLGPIO234"), \
+ PINCTRL_PIN(235, "PLGPIO235"), \
+ PINCTRL_PIN(236, "PLGPIO236"), \
+ PINCTRL_PIN(237, "PLGPIO237"), \
+ PINCTRL_PIN(238, "PLGPIO238"), \
+ PINCTRL_PIN(239, "PLGPIO239"), \
+ PINCTRL_PIN(240, "PLGPIO240"), \
+ PINCTRL_PIN(241, "PLGPIO241"), \
+ PINCTRL_PIN(242, "PLGPIO242"), \
+ PINCTRL_PIN(243, "PLGPIO243"), \
+ PINCTRL_PIN(244, "PLGPIO244"), \
+ PINCTRL_PIN(245, "PLGPIO245")
+
#endif /* __PINMUX_SPEAR_H__ */
diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c
new file mode 100644
index 0000000..fff168b
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-spear1310.c
@@ -0,0 +1,2198 @@
+/*
+ * Driver for the ST Microelectronics SPEAr1310 pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "pinctrl-spear.h"
+
+#define DRIVER_NAME "spear1310-pinmux"
+
+/* pins */
+static const struct pinctrl_pin_desc spear1310_pins[] = {
+ SPEAR_PIN_0_TO_101,
+ SPEAR_PIN_102_TO_245,
+};
+
+/* registers */
+#define PERIP_CFG 0x32C
+ #define MCIF_SEL_SHIFT 3
+ #define MCIF_SEL_SD (0x1 << MCIF_SEL_SHIFT)
+ #define MCIF_SEL_CF (0x2 << MCIF_SEL_SHIFT)
+ #define MCIF_SEL_XD (0x3 << MCIF_SEL_SHIFT)
+ #define MCIF_SEL_MASK (0x3 << MCIF_SEL_SHIFT)
+
+#define PCIE_SATA_CFG 0x3A4
+ #define PCIE_SATA2_SEL_PCIE (0 << 31)
+ #define PCIE_SATA1_SEL_PCIE (0 << 30)
+ #define PCIE_SATA0_SEL_PCIE (0 << 29)
+ #define PCIE_SATA2_SEL_SATA (1 << 31)
+ #define PCIE_SATA1_SEL_SATA (1 << 30)
+ #define PCIE_SATA0_SEL_SATA (1 << 29)
+ #define SATA2_CFG_TX_CLK_EN (1 << 27)
+ #define SATA2_CFG_RX_CLK_EN (1 << 26)
+ #define SATA2_CFG_POWERUP_RESET (1 << 25)
+ #define SATA2_CFG_PM_CLK_EN (1 << 24)
+ #define SATA1_CFG_TX_CLK_EN (1 << 23)
+ #define SATA1_CFG_RX_CLK_EN (1 << 22)
+ #define SATA1_CFG_POWERUP_RESET (1 << 21)
+ #define SATA1_CFG_PM_CLK_EN (1 << 20)
+ #define SATA0_CFG_TX_CLK_EN (1 << 19)
+ #define SATA0_CFG_RX_CLK_EN (1 << 18)
+ #define SATA0_CFG_POWERUP_RESET (1 << 17)
+ #define SATA0_CFG_PM_CLK_EN (1 << 16)
+ #define PCIE2_CFG_DEVICE_PRESENT (1 << 11)
+ #define PCIE2_CFG_POWERUP_RESET (1 << 10)
+ #define PCIE2_CFG_CORE_CLK_EN (1 << 9)
+ #define PCIE2_CFG_AUX_CLK_EN (1 << 8)
+ #define PCIE1_CFG_DEVICE_PRESENT (1 << 7)
+ #define PCIE1_CFG_POWERUP_RESET (1 << 6)
+ #define PCIE1_CFG_CORE_CLK_EN (1 << 5)
+ #define PCIE1_CFG_AUX_CLK_EN (1 << 4)
+ #define PCIE0_CFG_DEVICE_PRESENT (1 << 3)
+ #define PCIE0_CFG_POWERUP_RESET (1 << 2)
+ #define PCIE0_CFG_CORE_CLK_EN (1 << 1)
+ #define PCIE0_CFG_AUX_CLK_EN (1 << 0)
+
+#define PAD_FUNCTION_EN_0 0x650
+ #define PMX_UART0_MASK (1 << 1)
+ #define PMX_I2C0_MASK (1 << 2)
+ #define PMX_I2S0_MASK (1 << 3)
+ #define PMX_SSP0_MASK (1 << 4)
+ #define PMX_CLCD1_MASK (1 << 5)
+ #define PMX_EGPIO00_MASK (1 << 6)
+ #define PMX_EGPIO01_MASK (1 << 7)
+ #define PMX_EGPIO02_MASK (1 << 8)
+ #define PMX_EGPIO03_MASK (1 << 9)
+ #define PMX_EGPIO04_MASK (1 << 10)
+ #define PMX_EGPIO05_MASK (1 << 11)
+ #define PMX_EGPIO06_MASK (1 << 12)
+ #define PMX_EGPIO07_MASK (1 << 13)
+ #define PMX_EGPIO08_MASK (1 << 14)
+ #define PMX_EGPIO09_MASK (1 << 15)
+ #define PMX_SMI_MASK (1 << 16)
+ #define PMX_NAND8_MASK (1 << 17)
+ #define PMX_GMIICLK_MASK (1 << 18)
+ #define PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK (1 << 19)
+ #define PMX_RXCLK_RDV_TXEN_D03_MASK (1 << 20)
+ #define PMX_GMIID47_MASK (1 << 21)
+ #define PMX_MDC_MDIO_MASK (1 << 22)
+ #define PMX_MCI_DATA8_15_MASK (1 << 23)
+ #define PMX_NFAD23_MASK (1 << 24)
+ #define PMX_NFAD24_MASK (1 << 25)
+ #define PMX_NFAD25_MASK (1 << 26)
+ #define PMX_NFCE3_MASK (1 << 27)
+ #define PMX_NFWPRT3_MASK (1 << 28)
+ #define PMX_NFRSTPWDWN0_MASK (1 << 29)
+ #define PMX_NFRSTPWDWN1_MASK (1 << 30)
+ #define PMX_NFRSTPWDWN2_MASK (1 << 31)
+
+#define PAD_FUNCTION_EN_1 0x654
+ #define PMX_NFRSTPWDWN3_MASK (1 << 0)
+ #define PMX_SMINCS2_MASK (1 << 1)
+ #define PMX_SMINCS3_MASK (1 << 2)
+ #define PMX_CLCD2_MASK (1 << 3)
+ #define PMX_KBD_ROWCOL68_MASK (1 << 4)
+ #define PMX_EGPIO10_MASK (1 << 5)
+ #define PMX_EGPIO11_MASK (1 << 6)
+ #define PMX_EGPIO12_MASK (1 << 7)
+ #define PMX_EGPIO13_MASK (1 << 8)
+ #define PMX_EGPIO14_MASK (1 << 9)
+ #define PMX_EGPIO15_MASK (1 << 10)
+ #define PMX_UART0_MODEM_MASK (1 << 11)
+ #define PMX_GPT0_TMR0_MASK (1 << 12)
+ #define PMX_GPT0_TMR1_MASK (1 << 13)
+ #define PMX_GPT1_TMR0_MASK (1 << 14)
+ #define PMX_GPT1_TMR1_MASK (1 << 15)
+ #define PMX_I2S1_MASK (1 << 16)
+ #define PMX_KBD_ROWCOL25_MASK (1 << 17)
+ #define PMX_NFIO8_15_MASK (1 << 18)
+ #define PMX_KBD_COL1_MASK (1 << 19)
+ #define PMX_NFCE1_MASK (1 << 20)
+ #define PMX_KBD_COL0_MASK (1 << 21)
+ #define PMX_NFCE2_MASK (1 << 22)
+ #define PMX_KBD_ROW1_MASK (1 << 23)
+ #define PMX_NFWPRT1_MASK (1 << 24)
+ #define PMX_KBD_ROW0_MASK (1 << 25)
+ #define PMX_NFWPRT2_MASK (1 << 26)
+ #define PMX_MCIDATA0_MASK (1 << 27)
+ #define PMX_MCIDATA1_MASK (1 << 28)
+ #define PMX_MCIDATA2_MASK (1 << 29)
+ #define PMX_MCIDATA3_MASK (1 << 30)
+ #define PMX_MCIDATA4_MASK (1 << 31)
+
+#define PAD_FUNCTION_EN_2 0x658
+ #define PMX_MCIDATA5_MASK (1 << 0)
+ #define PMX_MCIDATA6_MASK (1 << 1)
+ #define PMX_MCIDATA7_MASK (1 << 2)
+ #define PMX_MCIDATA1SD_MASK (1 << 3)
+ #define PMX_MCIDATA2SD_MASK (1 << 4)
+ #define PMX_MCIDATA3SD_MASK (1 << 5)
+ #define PMX_MCIADDR0ALE_MASK (1 << 6)
+ #define PMX_MCIADDR1CLECLK_MASK (1 << 7)
+ #define PMX_MCIADDR2_MASK (1 << 8)
+ #define PMX_MCICECF_MASK (1 << 9)
+ #define PMX_MCICEXD_MASK (1 << 10)
+ #define PMX_MCICESDMMC_MASK (1 << 11)
+ #define PMX_MCICDCF1_MASK (1 << 12)
+ #define PMX_MCICDCF2_MASK (1 << 13)
+ #define PMX_MCICDXD_MASK (1 << 14)
+ #define PMX_MCICDSDMMC_MASK (1 << 15)
+ #define PMX_MCIDATADIR_MASK (1 << 16)
+ #define PMX_MCIDMARQWP_MASK (1 << 17)
+ #define PMX_MCIIORDRE_MASK (1 << 18)
+ #define PMX_MCIIOWRWE_MASK (1 << 19)
+ #define PMX_MCIRESETCF_MASK (1 << 20)
+ #define PMX_MCICS0CE_MASK (1 << 21)
+ #define PMX_MCICFINTR_MASK (1 << 22)
+ #define PMX_MCIIORDY_MASK (1 << 23)
+ #define PMX_MCICS1_MASK (1 << 24)
+ #define PMX_MCIDMAACK_MASK (1 << 25)
+ #define PMX_MCISDCMD_MASK (1 << 26)
+ #define PMX_MCILEDS_MASK (1 << 27)
+ #define PMX_TOUCH_XY_MASK (1 << 28)
+ #define PMX_SSP0_CS0_MASK (1 << 29)
+ #define PMX_SSP0_CS1_2_MASK (1 << 30)
+
+/* combined macros */
+#define PMX_GMII_MASK (PMX_GMIICLK_MASK | \
+ PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \
+ PMX_RXCLK_RDV_TXEN_D03_MASK | \
+ PMX_GMIID47_MASK | PMX_MDC_MDIO_MASK)
+
+#define PMX_EGPIO_0_GRP_MASK (PMX_EGPIO00_MASK | PMX_EGPIO01_MASK | \
+ PMX_EGPIO02_MASK | \
+ PMX_EGPIO03_MASK | PMX_EGPIO04_MASK | \
+ PMX_EGPIO05_MASK | PMX_EGPIO06_MASK | \
+ PMX_EGPIO07_MASK | PMX_EGPIO08_MASK | \
+ PMX_EGPIO09_MASK)
+#define PMX_EGPIO_1_GRP_MASK (PMX_EGPIO10_MASK | PMX_EGPIO11_MASK | \
+ PMX_EGPIO12_MASK | PMX_EGPIO13_MASK | \
+ PMX_EGPIO14_MASK | PMX_EGPIO15_MASK)
+
+#define PMX_KEYBOARD_6X6_MASK (PMX_KBD_ROW0_MASK | PMX_KBD_ROW1_MASK | \
+ PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL0_MASK | \
+ PMX_KBD_COL1_MASK)
+
+#define PMX_NAND8BIT_0_MASK (PMX_NAND8_MASK | PMX_NFAD23_MASK | \
+ PMX_NFAD24_MASK | PMX_NFAD25_MASK | \
+ PMX_NFWPRT3_MASK | PMX_NFRSTPWDWN0_MASK | \
+ PMX_NFRSTPWDWN1_MASK | PMX_NFRSTPWDWN2_MASK | \
+ PMX_NFCE3_MASK)
+#define PMX_NAND8BIT_1_MASK PMX_NFRSTPWDWN3_MASK
+
+#define PMX_NAND16BIT_1_MASK (PMX_KBD_ROWCOL25_MASK | PMX_NFIO8_15_MASK)
+#define PMX_NAND_4CHIPS_MASK (PMX_NFCE1_MASK | PMX_NFCE2_MASK | \
+ PMX_NFWPRT1_MASK | PMX_NFWPRT2_MASK | \
+ PMX_KBD_ROW0_MASK | PMX_KBD_ROW1_MASK | \
+ PMX_KBD_COL0_MASK | PMX_KBD_COL1_MASK)
+
+#define PMX_MCIFALL_1_MASK 0xF8000000
+#define PMX_MCIFALL_2_MASK 0x0FFFFFFF
+
+#define PMX_PCI_REG1_MASK (PMX_SMINCS2_MASK | PMX_SMINCS3_MASK | \
+ PMX_CLCD2_MASK | PMX_KBD_ROWCOL68_MASK | \
+ PMX_EGPIO_1_GRP_MASK | PMX_GPT0_TMR0_MASK | \
+ PMX_GPT0_TMR1_MASK | PMX_GPT1_TMR0_MASK | \
+ PMX_GPT1_TMR1_MASK | PMX_I2S1_MASK | \
+ PMX_NFCE2_MASK)
+#define PMX_PCI_REG2_MASK (PMX_TOUCH_XY_MASK | PMX_SSP0_CS0_MASK | \
+ PMX_SSP0_CS1_2_MASK)
+
+#define PMX_SMII_0_1_2_MASK (PMX_CLCD2_MASK | PMX_KBD_ROWCOL68_MASK)
+#define PMX_RGMII_REG0_MASK (PMX_MCI_DATA8_15_MASK | \
+ PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \
+ PMX_GMIID47_MASK)
+#define PMX_RGMII_REG1_MASK (PMX_KBD_ROWCOL68_MASK | PMX_EGPIO_1_GRP_MASK |\
+ PMX_KBD_ROW1_MASK | PMX_NFWPRT1_MASK | \
+ PMX_KBD_ROW0_MASK | PMX_NFWPRT2_MASK)
+#define PMX_RGMII_REG2_MASK (PMX_TOUCH_XY_MASK | PMX_SSP0_CS0_MASK | \
+ PMX_SSP0_CS1_2_MASK)
+
+#define PCIE_CFG_VAL(x) (PCIE_SATA##x##_SEL_PCIE | \
+ PCIE##x##_CFG_AUX_CLK_EN | \
+ PCIE##x##_CFG_CORE_CLK_EN | \
+ PCIE##x##_CFG_POWERUP_RESET | \
+ PCIE##x##_CFG_DEVICE_PRESENT)
+#define SATA_CFG_VAL(x) (PCIE_SATA##x##_SEL_SATA | \
+ SATA##x##_CFG_PM_CLK_EN | \
+ SATA##x##_CFG_POWERUP_RESET | \
+ SATA##x##_CFG_RX_CLK_EN | \
+ SATA##x##_CFG_TX_CLK_EN)
+
+/* Pad multiplexing for i2c0 device */
+static const unsigned i2c0_pins[] = { 102, 103 };
+static struct spear_muxreg i2c0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_I2C0_MASK,
+ .val = PMX_I2C0_MASK,
+ },
+};
+
+static struct spear_modemux i2c0_modemux[] = {
+ {
+ .muxregs = i2c0_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c0_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c0_pingroup = {
+ .name = "i2c0_grp",
+ .pins = i2c0_pins,
+ .npins = ARRAY_SIZE(i2c0_pins),
+ .modemuxs = i2c0_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c0_modemux),
+};
+
+static const char *const i2c0_grps[] = { "i2c0_grp" };
+static struct spear_function i2c0_function = {
+ .name = "i2c0",
+ .groups = i2c0_grps,
+ .ngroups = ARRAY_SIZE(i2c0_grps),
+};
+
+/* Pad multiplexing for ssp0 device */
+static const unsigned ssp0_pins[] = { 109, 110, 111, 112 };
+static struct spear_muxreg ssp0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_SSP0_MASK,
+ .val = PMX_SSP0_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_modemux[] = {
+ {
+ .muxregs = ssp0_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_pingroup = {
+ .name = "ssp0_grp",
+ .pins = ssp0_pins,
+ .npins = ARRAY_SIZE(ssp0_pins),
+ .modemuxs = ssp0_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_modemux),
+};
+
+/* Pad multiplexing for ssp0_cs0 device */
+static const unsigned ssp0_cs0_pins[] = { 96 };
+static struct spear_muxreg ssp0_cs0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_SSP0_CS0_MASK,
+ .val = PMX_SSP0_CS0_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_cs0_modemux[] = {
+ {
+ .muxregs = ssp0_cs0_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_cs0_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_cs0_pingroup = {
+ .name = "ssp0_cs0_grp",
+ .pins = ssp0_cs0_pins,
+ .npins = ARRAY_SIZE(ssp0_cs0_pins),
+ .modemuxs = ssp0_cs0_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_cs0_modemux),
+};
+
+/* ssp0_cs1_2 device */
+static const unsigned ssp0_cs1_2_pins[] = { 94, 95 };
+static struct spear_muxreg ssp0_cs1_2_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_SSP0_CS1_2_MASK,
+ .val = PMX_SSP0_CS1_2_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_cs1_2_modemux[] = {
+ {
+ .muxregs = ssp0_cs1_2_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_cs1_2_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_cs1_2_pingroup = {
+ .name = "ssp0_cs1_2_grp",
+ .pins = ssp0_cs1_2_pins,
+ .npins = ARRAY_SIZE(ssp0_cs1_2_pins),
+ .modemuxs = ssp0_cs1_2_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_cs1_2_modemux),
+};
+
+static const char *const ssp0_grps[] = { "ssp0_grp", "ssp0_cs0_grp",
+ "ssp0_cs1_2_grp" };
+static struct spear_function ssp0_function = {
+ .name = "ssp0",
+ .groups = ssp0_grps,
+ .ngroups = ARRAY_SIZE(ssp0_grps),
+};
+
+/* Pad multiplexing for i2s0 device */
+static const unsigned i2s0_pins[] = { 104, 105, 106, 107, 108 };
+static struct spear_muxreg i2s0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_I2S0_MASK,
+ .val = PMX_I2S0_MASK,
+ },
+};
+
+static struct spear_modemux i2s0_modemux[] = {
+ {
+ .muxregs = i2s0_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2s0_muxreg),
+ },
+};
+
+static struct spear_pingroup i2s0_pingroup = {
+ .name = "i2s0_grp",
+ .pins = i2s0_pins,
+ .npins = ARRAY_SIZE(i2s0_pins),
+ .modemuxs = i2s0_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2s0_modemux),
+};
+
+static const char *const i2s0_grps[] = { "i2s0_grp" };
+static struct spear_function i2s0_function = {
+ .name = "i2s0",
+ .groups = i2s0_grps,
+ .ngroups = ARRAY_SIZE(i2s0_grps),
+};
+
+/* Pad multiplexing for i2s1 device */
+static const unsigned i2s1_pins[] = { 0, 1, 2, 3 };
+static struct spear_muxreg i2s1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_I2S1_MASK,
+ .val = PMX_I2S1_MASK,
+ },
+};
+
+static struct spear_modemux i2s1_modemux[] = {
+ {
+ .muxregs = i2s1_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2s1_muxreg),
+ },
+};
+
+static struct spear_pingroup i2s1_pingroup = {
+ .name = "i2s1_grp",
+ .pins = i2s1_pins,
+ .npins = ARRAY_SIZE(i2s1_pins),
+ .modemuxs = i2s1_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2s1_modemux),
+};
+
+static const char *const i2s1_grps[] = { "i2s1_grp" };
+static struct spear_function i2s1_function = {
+ .name = "i2s1",
+ .groups = i2s1_grps,
+ .ngroups = ARRAY_SIZE(i2s1_grps),
+};
+
+/* Pad multiplexing for clcd device */
+static const unsigned clcd_pins[] = { 113, 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134,
+ 135, 136, 137, 138, 139, 140, 141, 142 };
+static struct spear_muxreg clcd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
+ },
+};
+
+static struct spear_modemux clcd_modemux[] = {
+ {
+ .muxregs = clcd_muxreg,
+ .nmuxregs = ARRAY_SIZE(clcd_muxreg),
+ },
+};
+
+static struct spear_pingroup clcd_pingroup = {
+ .name = "clcd_grp",
+ .pins = clcd_pins,
+ .npins = ARRAY_SIZE(clcd_pins),
+ .modemuxs = clcd_modemux,
+ .nmodemuxs = ARRAY_SIZE(clcd_modemux),
+};
+
+static const unsigned clcd_high_res_pins[] = { 30, 31, 32, 33, 34, 35, 36, 37,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53 };
+static struct spear_muxreg clcd_high_res_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_CLCD2_MASK,
+ .val = PMX_CLCD2_MASK,
+ },
+};
+
+static struct spear_modemux clcd_high_res_modemux[] = {
+ {
+ .muxregs = clcd_high_res_muxreg,
+ .nmuxregs = ARRAY_SIZE(clcd_high_res_muxreg),
+ },
+};
+
+static struct spear_pingroup clcd_high_res_pingroup = {
+ .name = "clcd_high_res_grp",
+ .pins = clcd_high_res_pins,
+ .npins = ARRAY_SIZE(clcd_high_res_pins),
+ .modemuxs = clcd_high_res_modemux,
+ .nmodemuxs = ARRAY_SIZE(clcd_high_res_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res" };
+static struct spear_function clcd_function = {
+ .name = "clcd",
+ .groups = clcd_grps,
+ .ngroups = ARRAY_SIZE(clcd_grps),
+};
+
+static const unsigned arm_gpio_pins[] = { 18, 19, 20, 21, 22, 23, 143, 144, 145,
+ 146, 147, 148, 149, 150, 151, 152 };
+static struct spear_muxreg arm_gpio_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_EGPIO_0_GRP_MASK,
+ .val = PMX_EGPIO_0_GRP_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_EGPIO_1_GRP_MASK,
+ .val = PMX_EGPIO_1_GRP_MASK,
+ },
+};
+
+static struct spear_modemux arm_gpio_modemux[] = {
+ {
+ .muxregs = arm_gpio_muxreg,
+ .nmuxregs = ARRAY_SIZE(arm_gpio_muxreg),
+ },
+};
+
+static struct spear_pingroup arm_gpio_pingroup = {
+ .name = "arm_gpio_grp",
+ .pins = arm_gpio_pins,
+ .npins = ARRAY_SIZE(arm_gpio_pins),
+ .modemuxs = arm_gpio_modemux,
+ .nmodemuxs = ARRAY_SIZE(arm_gpio_modemux),
+};
+
+static const char *const arm_gpio_grps[] = { "arm_gpio_grp" };
+static struct spear_function arm_gpio_function = {
+ .name = "arm_gpio",
+ .groups = arm_gpio_grps,
+ .ngroups = ARRAY_SIZE(arm_gpio_grps),
+};
+
+/* Pad multiplexing for smi 2 chips device */
+static const unsigned smi_2_chips_pins[] = { 153, 154, 155, 156, 157 };
+static struct spear_muxreg smi_2_chips_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
+ },
+};
+
+static struct spear_modemux smi_2_chips_modemux[] = {
+ {
+ .muxregs = smi_2_chips_muxreg,
+ .nmuxregs = ARRAY_SIZE(smi_2_chips_muxreg),
+ },
+};
+
+static struct spear_pingroup smi_2_chips_pingroup = {
+ .name = "smi_2_chips_grp",
+ .pins = smi_2_chips_pins,
+ .npins = ARRAY_SIZE(smi_2_chips_pins),
+ .modemuxs = smi_2_chips_modemux,
+ .nmodemuxs = ARRAY_SIZE(smi_2_chips_modemux),
+};
+
+static const unsigned smi_4_chips_pins[] = { 54, 55 };
+static struct spear_muxreg smi_4_chips_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+ .val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+ },
+};
+
+static struct spear_modemux smi_4_chips_modemux[] = {
+ {
+ .muxregs = smi_4_chips_muxreg,
+ .nmuxregs = ARRAY_SIZE(smi_4_chips_muxreg),
+ },
+};
+
+static struct spear_pingroup smi_4_chips_pingroup = {
+ .name = "smi_4_chips_grp",
+ .pins = smi_4_chips_pins,
+ .npins = ARRAY_SIZE(smi_4_chips_pins),
+ .modemuxs = smi_4_chips_modemux,
+ .nmodemuxs = ARRAY_SIZE(smi_4_chips_modemux),
+};
+
+static const char *const smi_grps[] = { "smi_2_chips_grp", "smi_4_chips_grp" };
+static struct spear_function smi_function = {
+ .name = "smi",
+ .groups = smi_grps,
+ .ngroups = ARRAY_SIZE(smi_grps),
+};
+
+/* Pad multiplexing for gmii device */
+static const unsigned gmii_pins[] = { 173, 174, 175, 176, 177, 178, 179, 180,
+ 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194,
+ 195, 196, 197, 198, 199, 200 };
+static struct spear_muxreg gmii_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_GMII_MASK,
+ .val = PMX_GMII_MASK,
+ },
+};
+
+static struct spear_modemux gmii_modemux[] = {
+ {
+ .muxregs = gmii_muxreg,
+ .nmuxregs = ARRAY_SIZE(gmii_muxreg),
+ },
+};
+
+static struct spear_pingroup gmii_pingroup = {
+ .name = "gmii_grp",
+ .pins = gmii_pins,
+ .npins = ARRAY_SIZE(gmii_pins),
+ .modemuxs = gmii_modemux,
+ .nmodemuxs = ARRAY_SIZE(gmii_modemux),
+};
+
+static const char *const gmii_grps[] = { "gmii_grp" };
+static struct spear_function gmii_function = {
+ .name = "gmii",
+ .groups = gmii_grps,
+ .ngroups = ARRAY_SIZE(gmii_grps),
+};
+
+/* Pad multiplexing for rgmii device */
+static const unsigned rgmii_pins[] = { 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 175,
+ 180, 181, 182, 183, 185, 188, 193, 194, 195, 196, 197, 198, 211, 212 };
+static struct spear_muxreg rgmii_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_RGMII_REG0_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_RGMII_REG1_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_RGMII_REG2_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux rgmii_modemux[] = {
+ {
+ .muxregs = rgmii_muxreg,
+ .nmuxregs = ARRAY_SIZE(rgmii_muxreg),
+ },
+};
+
+static struct spear_pingroup rgmii_pingroup = {
+ .name = "rgmii_grp",
+ .pins = rgmii_pins,
+ .npins = ARRAY_SIZE(rgmii_pins),
+ .modemuxs = rgmii_modemux,
+ .nmodemuxs = ARRAY_SIZE(rgmii_modemux),
+};
+
+static const char *const rgmii_grps[] = { "rgmii_grp" };
+static struct spear_function rgmii_function = {
+ .name = "rgmii",
+ .groups = rgmii_grps,
+ .ngroups = ARRAY_SIZE(rgmii_grps),
+};
+
+/* Pad multiplexing for smii_0_1_2 device */
+static const unsigned smii_0_1_2_pins[] = { 24, 25, 26, 27, 28, 29, 30, 31, 32,
+ 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50,
+ 51, 52, 53, 54, 55 };
+static struct spear_muxreg smii_0_1_2_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_SMII_0_1_2_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux smii_0_1_2_modemux[] = {
+ {
+ .muxregs = smii_0_1_2_muxreg,
+ .nmuxregs = ARRAY_SIZE(smii_0_1_2_muxreg),
+ },
+};
+
+static struct spear_pingroup smii_0_1_2_pingroup = {
+ .name = "smii_0_1_2_grp",
+ .pins = smii_0_1_2_pins,
+ .npins = ARRAY_SIZE(smii_0_1_2_pins),
+ .modemuxs = smii_0_1_2_modemux,
+ .nmodemuxs = ARRAY_SIZE(smii_0_1_2_modemux),
+};
+
+static const char *const smii_0_1_2_grps[] = { "smii_0_1_2_grp" };
+static struct spear_function smii_0_1_2_function = {
+ .name = "smii_0_1_2",
+ .groups = smii_0_1_2_grps,
+ .ngroups = ARRAY_SIZE(smii_0_1_2_grps),
+};
+
+/* Pad multiplexing for ras_mii_txclk device */
+static const unsigned ras_mii_txclk_pins[] = { 98, 99 };
+static struct spear_muxreg ras_mii_txclk_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_NFCE2_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux ras_mii_txclk_modemux[] = {
+ {
+ .muxregs = ras_mii_txclk_muxreg,
+ .nmuxregs = ARRAY_SIZE(ras_mii_txclk_muxreg),
+ },
+};
+
+static struct spear_pingroup ras_mii_txclk_pingroup = {
+ .name = "ras_mii_txclk_grp",
+ .pins = ras_mii_txclk_pins,
+ .npins = ARRAY_SIZE(ras_mii_txclk_pins),
+ .modemuxs = ras_mii_txclk_modemux,
+ .nmodemuxs = ARRAY_SIZE(ras_mii_txclk_modemux),
+};
+
+static const char *const ras_mii_txclk_grps[] = { "ras_mii_txclk_grp" };
+static struct spear_function ras_mii_txclk_function = {
+ .name = "ras_mii_txclk",
+ .groups = ras_mii_txclk_grps,
+ .ngroups = ARRAY_SIZE(ras_mii_txclk_grps),
+};
+
+/* Pad multiplexing for nand 8bit device (cs0 only) */
+static const unsigned nand_8bit_pins[] = { 56, 57, 58, 59, 60, 61, 62, 63, 64,
+ 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82,
+ 83, 84, 85, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,
+ 170, 171, 172, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211,
+ 212 };
+static struct spear_muxreg nand_8bit_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_NAND8BIT_0_MASK,
+ .val = PMX_NAND8BIT_0_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_NAND8BIT_1_MASK,
+ .val = PMX_NAND8BIT_1_MASK,
+ },
+};
+
+static struct spear_modemux nand_8bit_modemux[] = {
+ {
+ .muxregs = nand_8bit_muxreg,
+ .nmuxregs = ARRAY_SIZE(nand_8bit_muxreg),
+ },
+};
+
+static struct spear_pingroup nand_8bit_pingroup = {
+ .name = "nand_8bit_grp",
+ .pins = nand_8bit_pins,
+ .npins = ARRAY_SIZE(nand_8bit_pins),
+ .modemuxs = nand_8bit_modemux,
+ .nmodemuxs = ARRAY_SIZE(nand_8bit_modemux),
+};
+
+/* Pad multiplexing for nand 16bit device */
+static const unsigned nand_16bit_pins[] = { 201, 202, 203, 204, 207, 208, 209,
+ 210 };
+static struct spear_muxreg nand_16bit_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_NAND16BIT_1_MASK,
+ .val = PMX_NAND16BIT_1_MASK,
+ },
+};
+
+static struct spear_modemux nand_16bit_modemux[] = {
+ {
+ .muxregs = nand_16bit_muxreg,
+ .nmuxregs = ARRAY_SIZE(nand_16bit_muxreg),
+ },
+};
+
+static struct spear_pingroup nand_16bit_pingroup = {
+ .name = "nand_16bit_grp",
+ .pins = nand_16bit_pins,
+ .npins = ARRAY_SIZE(nand_16bit_pins),
+ .modemuxs = nand_16bit_modemux,
+ .nmodemuxs = ARRAY_SIZE(nand_16bit_modemux),
+};
+
+/* Pad multiplexing for nand 4 chips */
+static const unsigned nand_4_chips_pins[] = { 205, 206, 211, 212 };
+static struct spear_muxreg nand_4_chips_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_NAND_4CHIPS_MASK,
+ .val = PMX_NAND_4CHIPS_MASK,
+ },
+};
+
+static struct spear_modemux nand_4_chips_modemux[] = {
+ {
+ .muxregs = nand_4_chips_muxreg,
+ .nmuxregs = ARRAY_SIZE(nand_4_chips_muxreg),
+ },
+};
+
+static struct spear_pingroup nand_4_chips_pingroup = {
+ .name = "nand_4_chips_grp",
+ .pins = nand_4_chips_pins,
+ .npins = ARRAY_SIZE(nand_4_chips_pins),
+ .modemuxs = nand_4_chips_modemux,
+ .nmodemuxs = ARRAY_SIZE(nand_4_chips_modemux),
+};
+
+static const char *const nand_grps[] = { "nand_8bit_grp", "nand_16bit_grp",
+ "nand_4_chips_grp" };
+static struct spear_function nand_function = {
+ .name = "nand",
+ .groups = nand_grps,
+ .ngroups = ARRAY_SIZE(nand_grps),
+};
+
+/* Pad multiplexing for keyboard_6x6 device */
+static const unsigned keyboard_6x6_pins[] = { 201, 202, 203, 204, 205, 206, 207,
+ 208, 209, 210, 211, 212 };
+static struct spear_muxreg keyboard_6x6_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_KEYBOARD_6X6_MASK | PMX_NFIO8_15_MASK |
+ PMX_NFCE1_MASK | PMX_NFCE2_MASK | PMX_NFWPRT1_MASK |
+ PMX_NFWPRT2_MASK,
+ .val = PMX_KEYBOARD_6X6_MASK,
+ },
+};
+
+static struct spear_modemux keyboard_6x6_modemux[] = {
+ {
+ .muxregs = keyboard_6x6_muxreg,
+ .nmuxregs = ARRAY_SIZE(keyboard_6x6_muxreg),
+ },
+};
+
+static struct spear_pingroup keyboard_6x6_pingroup = {
+ .name = "keyboard_6x6_grp",
+ .pins = keyboard_6x6_pins,
+ .npins = ARRAY_SIZE(keyboard_6x6_pins),
+ .modemuxs = keyboard_6x6_modemux,
+ .nmodemuxs = ARRAY_SIZE(keyboard_6x6_modemux),
+};
+
+/* Pad multiplexing for keyboard_rowcol6_8 device */
+static const unsigned keyboard_rowcol6_8_pins[] = { 24, 25, 26, 27, 28, 29 };
+static struct spear_muxreg keyboard_rowcol6_8_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_KBD_ROWCOL68_MASK,
+ .val = PMX_KBD_ROWCOL68_MASK,
+ },
+};
+
+static struct spear_modemux keyboard_rowcol6_8_modemux[] = {
+ {
+ .muxregs = keyboard_rowcol6_8_muxreg,
+ .nmuxregs = ARRAY_SIZE(keyboard_rowcol6_8_muxreg),
+ },
+};
+
+static struct spear_pingroup keyboard_rowcol6_8_pingroup = {
+ .name = "keyboard_rowcol6_8_grp",
+ .pins = keyboard_rowcol6_8_pins,
+ .npins = ARRAY_SIZE(keyboard_rowcol6_8_pins),
+ .modemuxs = keyboard_rowcol6_8_modemux,
+ .nmodemuxs = ARRAY_SIZE(keyboard_rowcol6_8_modemux),
+};
+
+static const char *const keyboard_grps[] = { "keyboard_6x6_grp",
+ "keyboard_rowcol6_8_grp" };
+static struct spear_function keyboard_function = {
+ .name = "keyboard",
+ .groups = keyboard_grps,
+ .ngroups = ARRAY_SIZE(keyboard_grps),
+};
+
+/* Pad multiplexing for uart0 device */
+static const unsigned uart0_pins[] = { 100, 101 };
+static struct spear_muxreg uart0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_UART0_MASK,
+ .val = PMX_UART0_MASK,
+ },
+};
+
+static struct spear_modemux uart0_modemux[] = {
+ {
+ .muxregs = uart0_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart0_muxreg),
+ },
+};
+
+static struct spear_pingroup uart0_pingroup = {
+ .name = "uart0_grp",
+ .pins = uart0_pins,
+ .npins = ARRAY_SIZE(uart0_pins),
+ .modemuxs = uart0_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart0_modemux),
+};
+
+/* Pad multiplexing for uart0_modem device */
+static const unsigned uart0_modem_pins[] = { 12, 13, 14, 15, 16, 17 };
+static struct spear_muxreg uart0_modem_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_UART0_MODEM_MASK,
+ .val = PMX_UART0_MODEM_MASK,
+ },
+};
+
+static struct spear_modemux uart0_modem_modemux[] = {
+ {
+ .muxregs = uart0_modem_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart0_modem_muxreg),
+ },
+};
+
+static struct spear_pingroup uart0_modem_pingroup = {
+ .name = "uart0_modem_grp",
+ .pins = uart0_modem_pins,
+ .npins = ARRAY_SIZE(uart0_modem_pins),
+ .modemuxs = uart0_modem_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart0_modem_modemux),
+};
+
+static const char *const uart0_grps[] = { "uart0_grp", "uart0_modem_grp" };
+static struct spear_function uart0_function = {
+ .name = "uart0",
+ .groups = uart0_grps,
+ .ngroups = ARRAY_SIZE(uart0_grps),
+};
+
+/* Pad multiplexing for gpt0_tmr0 device */
+static const unsigned gpt0_tmr0_pins[] = { 10, 11 };
+static struct spear_muxreg gpt0_tmr0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_GPT0_TMR0_MASK,
+ .val = PMX_GPT0_TMR0_MASK,
+ },
+};
+
+static struct spear_modemux gpt0_tmr0_modemux[] = {
+ {
+ .muxregs = gpt0_tmr0_muxreg,
+ .nmuxregs = ARRAY_SIZE(gpt0_tmr0_muxreg),
+ },
+};
+
+static struct spear_pingroup gpt0_tmr0_pingroup = {
+ .name = "gpt0_tmr0_grp",
+ .pins = gpt0_tmr0_pins,
+ .npins = ARRAY_SIZE(gpt0_tmr0_pins),
+ .modemuxs = gpt0_tmr0_modemux,
+ .nmodemuxs = ARRAY_SIZE(gpt0_tmr0_modemux),
+};
+
+/* Pad multiplexing for gpt0_tmr1 device */
+static const unsigned gpt0_tmr1_pins[] = { 8, 9 };
+static struct spear_muxreg gpt0_tmr1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_GPT0_TMR1_MASK,
+ .val = PMX_GPT0_TMR1_MASK,
+ },
+};
+
+static struct spear_modemux gpt0_tmr1_modemux[] = {
+ {
+ .muxregs = gpt0_tmr1_muxreg,
+ .nmuxregs = ARRAY_SIZE(gpt0_tmr1_muxreg),
+ },
+};
+
+static struct spear_pingroup gpt0_tmr1_pingroup = {
+ .name = "gpt0_tmr1_grp",
+ .pins = gpt0_tmr1_pins,
+ .npins = ARRAY_SIZE(gpt0_tmr1_pins),
+ .modemuxs = gpt0_tmr1_modemux,
+ .nmodemuxs = ARRAY_SIZE(gpt0_tmr1_modemux),
+};
+
+static const char *const gpt0_grps[] = { "gpt0_tmr0_grp", "gpt0_tmr1_grp" };
+static struct spear_function gpt0_function = {
+ .name = "gpt0",
+ .groups = gpt0_grps,
+ .ngroups = ARRAY_SIZE(gpt0_grps),
+};
+
+/* Pad multiplexing for gpt1_tmr0 device */
+static const unsigned gpt1_tmr0_pins[] = { 6, 7 };
+static struct spear_muxreg gpt1_tmr0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_GPT1_TMR0_MASK,
+ .val = PMX_GPT1_TMR0_MASK,
+ },
+};
+
+static struct spear_modemux gpt1_tmr0_modemux[] = {
+ {
+ .muxregs = gpt1_tmr0_muxreg,
+ .nmuxregs = ARRAY_SIZE(gpt1_tmr0_muxreg),
+ },
+};
+
+static struct spear_pingroup gpt1_tmr0_pingroup = {
+ .name = "gpt1_tmr0_grp",
+ .pins = gpt1_tmr0_pins,
+ .npins = ARRAY_SIZE(gpt1_tmr0_pins),
+ .modemuxs = gpt1_tmr0_modemux,
+ .nmodemuxs = ARRAY_SIZE(gpt1_tmr0_modemux),
+};
+
+/* Pad multiplexing for gpt1_tmr1 device */
+static const unsigned gpt1_tmr1_pins[] = { 4, 5 };
+static struct spear_muxreg gpt1_tmr1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_GPT1_TMR1_MASK,
+ .val = PMX_GPT1_TMR1_MASK,
+ },
+};
+
+static struct spear_modemux gpt1_tmr1_modemux[] = {
+ {
+ .muxregs = gpt1_tmr1_muxreg,
+ .nmuxregs = ARRAY_SIZE(gpt1_tmr1_muxreg),
+ },
+};
+
+static struct spear_pingroup gpt1_tmr1_pingroup = {
+ .name = "gpt1_tmr1_grp",
+ .pins = gpt1_tmr1_pins,
+ .npins = ARRAY_SIZE(gpt1_tmr1_pins),
+ .modemuxs = gpt1_tmr1_modemux,
+ .nmodemuxs = ARRAY_SIZE(gpt1_tmr1_modemux),
+};
+
+static const char *const gpt1_grps[] = { "gpt1_tmr1_grp", "gpt1_tmr0_grp" };
+static struct spear_function gpt1_function = {
+ .name = "gpt1",
+ .groups = gpt1_grps,
+ .ngroups = ARRAY_SIZE(gpt1_grps),
+};
+
+/* Pad multiplexing for mcif device */
+static const unsigned mcif_pins[] = { 86, 87, 88, 89, 90, 91, 92, 93, 213, 214,
+ 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228,
+ 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242,
+ 243, 244, 245 };
+#define MCIF_MUXREG \
+ { \
+ .reg = PAD_FUNCTION_EN_0, \
+ .mask = PMX_MCI_DATA8_15_MASK, \
+ .val = PMX_MCI_DATA8_15_MASK, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_1, \
+ .mask = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \
+ PMX_NFWPRT2_MASK, \
+ .val = PMX_MCIFALL_1_MASK, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_2, \
+ .mask = PMX_MCIFALL_2_MASK, \
+ .val = PMX_MCIFALL_2_MASK, \
+ }
+
+/* sdhci device */
+static struct spear_muxreg sdhci_muxreg[] = {
+ MCIF_MUXREG,
+ {
+ .reg = PERIP_CFG,
+ .mask = MCIF_SEL_MASK,
+ .val = MCIF_SEL_SD,
+ },
+};
+
+static struct spear_modemux sdhci_modemux[] = {
+ {
+ .muxregs = sdhci_muxreg,
+ .nmuxregs = ARRAY_SIZE(sdhci_muxreg),
+ },
+};
+
+static struct spear_pingroup sdhci_pingroup = {
+ .name = "sdhci_grp",
+ .pins = mcif_pins,
+ .npins = ARRAY_SIZE(mcif_pins),
+ .modemuxs = sdhci_modemux,
+ .nmodemuxs = ARRAY_SIZE(sdhci_modemux),
+};
+
+static const char *const sdhci_grps[] = { "sdhci_grp" };
+static struct spear_function sdhci_function = {
+ .name = "sdhci",
+ .groups = sdhci_grps,
+ .ngroups = ARRAY_SIZE(sdhci_grps),
+};
+
+/* cf device */
+static struct spear_muxreg cf_muxreg[] = {
+ MCIF_MUXREG,
+ {
+ .reg = PERIP_CFG,
+ .mask = MCIF_SEL_MASK,
+ .val = MCIF_SEL_CF,
+ },
+};
+
+static struct spear_modemux cf_modemux[] = {
+ {
+ .muxregs = cf_muxreg,
+ .nmuxregs = ARRAY_SIZE(cf_muxreg),
+ },
+};
+
+static struct spear_pingroup cf_pingroup = {
+ .name = "cf_grp",
+ .pins = mcif_pins,
+ .npins = ARRAY_SIZE(mcif_pins),
+ .modemuxs = cf_modemux,
+ .nmodemuxs = ARRAY_SIZE(cf_modemux),
+};
+
+static const char *const cf_grps[] = { "cf_grp" };
+static struct spear_function cf_function = {
+ .name = "cf",
+ .groups = cf_grps,
+ .ngroups = ARRAY_SIZE(cf_grps),
+};
+
+/* xd device */
+static struct spear_muxreg xd_muxreg[] = {
+ MCIF_MUXREG,
+ {
+ .reg = PERIP_CFG,
+ .mask = MCIF_SEL_MASK,
+ .val = MCIF_SEL_XD,
+ },
+};
+
+static struct spear_modemux xd_modemux[] = {
+ {
+ .muxregs = xd_muxreg,
+ .nmuxregs = ARRAY_SIZE(xd_muxreg),
+ },
+};
+
+static struct spear_pingroup xd_pingroup = {
+ .name = "xd_grp",
+ .pins = mcif_pins,
+ .npins = ARRAY_SIZE(mcif_pins),
+ .modemuxs = xd_modemux,
+ .nmodemuxs = ARRAY_SIZE(xd_modemux),
+};
+
+static const char *const xd_grps[] = { "xd_grp" };
+static struct spear_function xd_function = {
+ .name = "xd",
+ .groups = xd_grps,
+ .ngroups = ARRAY_SIZE(xd_grps),
+};
+
+/* Pad multiplexing for touch_xy device */
+static const unsigned touch_xy_pins[] = { 97 };
+static struct spear_muxreg touch_xy_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_TOUCH_XY_MASK,
+ .val = PMX_TOUCH_XY_MASK,
+ },
+};
+
+static struct spear_modemux touch_xy_modemux[] = {
+ {
+ .muxregs = touch_xy_muxreg,
+ .nmuxregs = ARRAY_SIZE(touch_xy_muxreg),
+ },
+};
+
+static struct spear_pingroup touch_xy_pingroup = {
+ .name = "touch_xy_grp",
+ .pins = touch_xy_pins,
+ .npins = ARRAY_SIZE(touch_xy_pins),
+ .modemuxs = touch_xy_modemux,
+ .nmodemuxs = ARRAY_SIZE(touch_xy_modemux),
+};
+
+static const char *const touch_xy_grps[] = { "touch_xy_grp" };
+static struct spear_function touch_xy_function = {
+ .name = "touchscreen",
+ .groups = touch_xy_grps,
+ .ngroups = ARRAY_SIZE(touch_xy_grps),
+};
+
+/* Pad multiplexing for uart1 device */
+/* Muxed with I2C */
+static const unsigned uart1_dis_i2c_pins[] = { 102, 103 };
+static struct spear_muxreg uart1_dis_i2c_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_I2C0_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux uart1_dis_i2c_modemux[] = {
+ {
+ .muxregs = uart1_dis_i2c_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart1_dis_i2c_muxreg),
+ },
+};
+
+static struct spear_pingroup uart_1_dis_i2c_pingroup = {
+ .name = "uart1_disable_i2c_grp",
+ .pins = uart1_dis_i2c_pins,
+ .npins = ARRAY_SIZE(uart1_dis_i2c_pins),
+ .modemuxs = uart1_dis_i2c_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart1_dis_i2c_modemux),
+};
+
+/* Muxed with SD/MMC */
+static const unsigned uart1_dis_sd_pins[] = { 214, 215 };
+static struct spear_muxreg uart1_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_MCIDATA1_MASK |
+ PMX_MCIDATA2_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux uart1_dis_sd_modemux[] = {
+ {
+ .muxregs = uart1_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart1_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup uart_1_dis_sd_pingroup = {
+ .name = "uart1_disable_sd_grp",
+ .pins = uart1_dis_sd_pins,
+ .npins = ARRAY_SIZE(uart1_dis_sd_pins),
+ .modemuxs = uart1_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart1_dis_sd_modemux),
+};
+
+static const char *const uart1_grps[] = { "uart1_disable_i2c_grp",
+ "uart1_disable_sd_grp" };
+static struct spear_function uart1_function = {
+ .name = "uart1",
+ .groups = uart1_grps,
+ .ngroups = ARRAY_SIZE(uart1_grps),
+};
+
+/* Pad multiplexing for uart2_3 device */
+static const unsigned uart2_3_pins[] = { 104, 105, 106, 107 };
+static struct spear_muxreg uart2_3_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_I2S0_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux uart2_3_modemux[] = {
+ {
+ .muxregs = uart2_3_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart2_3_muxreg),
+ },
+};
+
+static struct spear_pingroup uart_2_3_pingroup = {
+ .name = "uart2_3_grp",
+ .pins = uart2_3_pins,
+ .npins = ARRAY_SIZE(uart2_3_pins),
+ .modemuxs = uart2_3_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart2_3_modemux),
+};
+
+static const char *const uart2_3_grps[] = { "uart2_3_grp" };
+static struct spear_function uart2_3_function = {
+ .name = "uart2_3",
+ .groups = uart2_3_grps,
+ .ngroups = ARRAY_SIZE(uart2_3_grps),
+};
+
+/* Pad multiplexing for uart4 device */
+static const unsigned uart4_pins[] = { 108, 113 };
+static struct spear_muxreg uart4_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_I2S0_MASK | PMX_CLCD1_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux uart4_modemux[] = {
+ {
+ .muxregs = uart4_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart4_muxreg),
+ },
+};
+
+static struct spear_pingroup uart_4_pingroup = {
+ .name = "uart4_grp",
+ .pins = uart4_pins,
+ .npins = ARRAY_SIZE(uart4_pins),
+ .modemuxs = uart4_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart4_modemux),
+};
+
+static const char *const uart4_grps[] = { "uart4_grp" };
+static struct spear_function uart4_function = {
+ .name = "uart4",
+ .groups = uart4_grps,
+ .ngroups = ARRAY_SIZE(uart4_grps),
+};
+
+/* Pad multiplexing for uart5 device */
+static const unsigned uart5_pins[] = { 114, 115 };
+static struct spear_muxreg uart5_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux uart5_modemux[] = {
+ {
+ .muxregs = uart5_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart5_muxreg),
+ },
+};
+
+static struct spear_pingroup uart_5_pingroup = {
+ .name = "uart5_grp",
+ .pins = uart5_pins,
+ .npins = ARRAY_SIZE(uart5_pins),
+ .modemuxs = uart5_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart5_modemux),
+};
+
+static const char *const uart5_grps[] = { "uart5_grp" };
+static struct spear_function uart5_function = {
+ .name = "uart5",
+ .groups = uart5_grps,
+ .ngroups = ARRAY_SIZE(uart5_grps),
+};
+
+/* Pad multiplexing for rs485_0_1_tdm_0_1 device */
+static const unsigned rs485_0_1_tdm_0_1_pins[] = { 116, 117, 118, 119, 120, 121,
+ 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135,
+ 136, 137 };
+static struct spear_muxreg rs485_0_1_tdm_0_1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux rs485_0_1_tdm_0_1_modemux[] = {
+ {
+ .muxregs = rs485_0_1_tdm_0_1_muxreg,
+ .nmuxregs = ARRAY_SIZE(rs485_0_1_tdm_0_1_muxreg),
+ },
+};
+
+static struct spear_pingroup rs485_0_1_tdm_0_1_pingroup = {
+ .name = "rs485_0_1_tdm_0_1_grp",
+ .pins = rs485_0_1_tdm_0_1_pins,
+ .npins = ARRAY_SIZE(rs485_0_1_tdm_0_1_pins),
+ .modemuxs = rs485_0_1_tdm_0_1_modemux,
+ .nmodemuxs = ARRAY_SIZE(rs485_0_1_tdm_0_1_modemux),
+};
+
+static const char *const rs485_0_1_tdm_0_1_grps[] = { "rs485_0_1_tdm_0_1_grp" };
+static struct spear_function rs485_0_1_tdm_0_1_function = {
+ .name = "rs485_0_1_tdm_0_1",
+ .groups = rs485_0_1_tdm_0_1_grps,
+ .ngroups = ARRAY_SIZE(rs485_0_1_tdm_0_1_grps),
+};
+
+/* Pad multiplexing for i2c_1_2 device */
+static const unsigned i2c_1_2_pins[] = { 138, 139, 140, 141 };
+static struct spear_muxreg i2c_1_2_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c_1_2_modemux[] = {
+ {
+ .muxregs = i2c_1_2_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c_1_2_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c_1_2_pingroup = {
+ .name = "i2c_1_2_grp",
+ .pins = i2c_1_2_pins,
+ .npins = ARRAY_SIZE(i2c_1_2_pins),
+ .modemuxs = i2c_1_2_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c_1_2_modemux),
+};
+
+static const char *const i2c_1_2_grps[] = { "i2c_1_2_grp" };
+static struct spear_function i2c_1_2_function = {
+ .name = "i2c_1_2",
+ .groups = i2c_1_2_grps,
+ .ngroups = ARRAY_SIZE(i2c_1_2_grps),
+};
+
+/* Pad multiplexing for i2c3_dis_smi_clcd device */
+/* Muxed with SMI & CLCD */
+static const unsigned i2c3_dis_smi_clcd_pins[] = { 142, 153 };
+static struct spear_muxreg i2c3_dis_smi_clcd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_CLCD1_MASK | PMX_SMI_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c3_dis_smi_clcd_modemux[] = {
+ {
+ .muxregs = i2c3_dis_smi_clcd_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c3_dis_smi_clcd_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c3_dis_smi_clcd_pingroup = {
+ .name = "i2c3_dis_smi_clcd_grp",
+ .pins = i2c3_dis_smi_clcd_pins,
+ .npins = ARRAY_SIZE(i2c3_dis_smi_clcd_pins),
+ .modemuxs = i2c3_dis_smi_clcd_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c3_dis_smi_clcd_modemux),
+};
+
+/* Pad multiplexing for i2c3_dis_sd_i2s0 device */
+/* Muxed with SD/MMC & I2S1 */
+static const unsigned i2c3_dis_sd_i2s0_pins[] = { 0, 216 };
+static struct spear_muxreg i2c3_dis_sd_i2s0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c3_dis_sd_i2s0_modemux[] = {
+ {
+ .muxregs = i2c3_dis_sd_i2s0_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c3_dis_sd_i2s0_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c3_dis_sd_i2s0_pingroup = {
+ .name = "i2c3_dis_sd_i2s0_grp",
+ .pins = i2c3_dis_sd_i2s0_pins,
+ .npins = ARRAY_SIZE(i2c3_dis_sd_i2s0_pins),
+ .modemuxs = i2c3_dis_sd_i2s0_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c3_dis_sd_i2s0_modemux),
+};
+
+static const char *const i2c3_grps[] = { "i2c3_dis_smi_clcd_grp",
+ "i2c3_dis_sd_i2s0_grp" };
+static struct spear_function i2c3_unction = {
+ .name = "i2c3_i2s1",
+ .groups = i2c3_grps,
+ .ngroups = ARRAY_SIZE(i2c3_grps),
+};
+
+/* Pad multiplexing for i2c_4_5_dis_smi device */
+/* Muxed with SMI */
+static const unsigned i2c_4_5_dis_smi_pins[] = { 154, 155, 156, 157 };
+static struct spear_muxreg i2c_4_5_dis_smi_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_SMI_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c_4_5_dis_smi_modemux[] = {
+ {
+ .muxregs = i2c_4_5_dis_smi_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c_4_5_dis_smi_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c_4_5_dis_smi_pingroup = {
+ .name = "i2c_4_5_dis_smi_grp",
+ .pins = i2c_4_5_dis_smi_pins,
+ .npins = ARRAY_SIZE(i2c_4_5_dis_smi_pins),
+ .modemuxs = i2c_4_5_dis_smi_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c_4_5_dis_smi_modemux),
+};
+
+/* Pad multiplexing for i2c4_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned i2c4_dis_sd_pins[] = { 217, 218 };
+static struct spear_muxreg i2c4_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_MCIDATA4_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCIDATA5_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c4_dis_sd_modemux[] = {
+ {
+ .muxregs = i2c4_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c4_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c4_dis_sd_pingroup = {
+ .name = "i2c4_dis_sd_grp",
+ .pins = i2c4_dis_sd_pins,
+ .npins = ARRAY_SIZE(i2c4_dis_sd_pins),
+ .modemuxs = i2c4_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c4_dis_sd_modemux),
+};
+
+/* Pad multiplexing for i2c5_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned i2c5_dis_sd_pins[] = { 219, 220 };
+static struct spear_muxreg i2c5_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCIDATA6_MASK |
+ PMX_MCIDATA7_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c5_dis_sd_modemux[] = {
+ {
+ .muxregs = i2c5_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c5_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c5_dis_sd_pingroup = {
+ .name = "i2c5_dis_sd_grp",
+ .pins = i2c5_dis_sd_pins,
+ .npins = ARRAY_SIZE(i2c5_dis_sd_pins),
+ .modemuxs = i2c5_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c5_dis_sd_modemux),
+};
+
+static const char *const i2c_4_5_grps[] = { "i2c5_dis_sd_grp",
+ "i2c4_dis_sd_grp", "i2c_4_5_dis_smi_grp" };
+static struct spear_function i2c_4_5_function = {
+ .name = "i2c_4_5",
+ .groups = i2c_4_5_grps,
+ .ngroups = ARRAY_SIZE(i2c_4_5_grps),
+};
+
+/* Pad multiplexing for i2c_6_7_dis_kbd device */
+/* Muxed with KBD */
+static const unsigned i2c_6_7_dis_kbd_pins[] = { 207, 208, 209, 210 };
+static struct spear_muxreg i2c_6_7_dis_kbd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_KBD_ROWCOL25_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c_6_7_dis_kbd_modemux[] = {
+ {
+ .muxregs = i2c_6_7_dis_kbd_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c_6_7_dis_kbd_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c_6_7_dis_kbd_pingroup = {
+ .name = "i2c_6_7_dis_kbd_grp",
+ .pins = i2c_6_7_dis_kbd_pins,
+ .npins = ARRAY_SIZE(i2c_6_7_dis_kbd_pins),
+ .modemuxs = i2c_6_7_dis_kbd_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c_6_7_dis_kbd_modemux),
+};
+
+/* Pad multiplexing for i2c6_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned i2c6_dis_sd_pins[] = { 236, 237 };
+static struct spear_muxreg i2c6_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCIIORDRE_MASK |
+ PMX_MCIIOWRWE_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c6_dis_sd_modemux[] = {
+ {
+ .muxregs = i2c6_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c6_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c6_dis_sd_pingroup = {
+ .name = "i2c6_dis_sd_grp",
+ .pins = i2c6_dis_sd_pins,
+ .npins = ARRAY_SIZE(i2c6_dis_sd_pins),
+ .modemuxs = i2c6_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c6_dis_sd_modemux),
+};
+
+/* Pad multiplexing for i2c7_dis_sd device */
+static const unsigned i2c7_dis_sd_pins[] = { 238, 239 };
+static struct spear_muxreg i2c7_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCIRESETCF_MASK |
+ PMX_MCICS0CE_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux i2c7_dis_sd_modemux[] = {
+ {
+ .muxregs = i2c7_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c7_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c7_dis_sd_pingroup = {
+ .name = "i2c7_dis_sd_grp",
+ .pins = i2c7_dis_sd_pins,
+ .npins = ARRAY_SIZE(i2c7_dis_sd_pins),
+ .modemuxs = i2c7_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c7_dis_sd_modemux),
+};
+
+static const char *const i2c_6_7_grps[] = { "i2c6_dis_sd_grp",
+ "i2c7_dis_sd_grp", "i2c_6_7_dis_kbd_grp" };
+static struct spear_function i2c_6_7_function = {
+ .name = "i2c_6_7",
+ .groups = i2c_6_7_grps,
+ .ngroups = ARRAY_SIZE(i2c_6_7_grps),
+};
+
+/* Pad multiplexing for can0_dis_nor device */
+/* Muxed with NOR */
+static const unsigned can0_dis_nor_pins[] = { 56, 57 };
+static struct spear_muxreg can0_dis_nor_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_NFRSTPWDWN2_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_NFRSTPWDWN3_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux can0_dis_nor_modemux[] = {
+ {
+ .muxregs = can0_dis_nor_muxreg,
+ .nmuxregs = ARRAY_SIZE(can0_dis_nor_muxreg),
+ },
+};
+
+static struct spear_pingroup can0_dis_nor_pingroup = {
+ .name = "can0_dis_nor_grp",
+ .pins = can0_dis_nor_pins,
+ .npins = ARRAY_SIZE(can0_dis_nor_pins),
+ .modemuxs = can0_dis_nor_modemux,
+ .nmodemuxs = ARRAY_SIZE(can0_dis_nor_modemux),
+};
+
+/* Pad multiplexing for can0_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned can0_dis_sd_pins[] = { 240, 241 };
+static struct spear_muxreg can0_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux can0_dis_sd_modemux[] = {
+ {
+ .muxregs = can0_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(can0_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup can0_dis_sd_pingroup = {
+ .name = "can0_dis_sd_grp",
+ .pins = can0_dis_sd_pins,
+ .npins = ARRAY_SIZE(can0_dis_sd_pins),
+ .modemuxs = can0_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(can0_dis_sd_modemux),
+};
+
+static const char *const can0_grps[] = { "can0_dis_nor_grp", "can0_dis_sd_grp"
+};
+static struct spear_function can0_function = {
+ .name = "can0",
+ .groups = can0_grps,
+ .ngroups = ARRAY_SIZE(can0_grps),
+};
+
+/* Pad multiplexing for can1_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned can1_dis_sd_pins[] = { 242, 243 };
+static struct spear_muxreg can1_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux can1_dis_sd_modemux[] = {
+ {
+ .muxregs = can1_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(can1_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup can1_dis_sd_pingroup = {
+ .name = "can1_dis_sd_grp",
+ .pins = can1_dis_sd_pins,
+ .npins = ARRAY_SIZE(can1_dis_sd_pins),
+ .modemuxs = can1_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(can1_dis_sd_modemux),
+};
+
+/* Pad multiplexing for can1_dis_kbd device */
+/* Muxed with KBD */
+static const unsigned can1_dis_kbd_pins[] = { 201, 202 };
+static struct spear_muxreg can1_dis_kbd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_KBD_ROWCOL25_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux can1_dis_kbd_modemux[] = {
+ {
+ .muxregs = can1_dis_kbd_muxreg,
+ .nmuxregs = ARRAY_SIZE(can1_dis_kbd_muxreg),
+ },
+};
+
+static struct spear_pingroup can1_dis_kbd_pingroup = {
+ .name = "can1_dis_kbd_grp",
+ .pins = can1_dis_kbd_pins,
+ .npins = ARRAY_SIZE(can1_dis_kbd_pins),
+ .modemuxs = can1_dis_kbd_modemux,
+ .nmodemuxs = ARRAY_SIZE(can1_dis_kbd_modemux),
+};
+
+static const char *const can1_grps[] = { "can1_dis_sd_grp", "can1_dis_kbd_grp"
+};
+static struct spear_function can1_function = {
+ .name = "can1",
+ .groups = can1_grps,
+ .ngroups = ARRAY_SIZE(can1_grps),
+};
+
+/* Pad multiplexing for pci device */
+static const unsigned pci_sata_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18,
+ 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
+ 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,
+ 55, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 };
+#define PCI_SATA_MUXREG \
+ { \
+ .reg = PAD_FUNCTION_EN_0, \
+ .mask = PMX_MCI_DATA8_15_MASK, \
+ .val = 0, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_1, \
+ .mask = PMX_PCI_REG1_MASK, \
+ .val = 0, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_2, \
+ .mask = PMX_PCI_REG2_MASK, \
+ .val = 0, \
+ }
+
+/* pad multiplexing for pcie0 device */
+static struct spear_muxreg pcie0_muxreg[] = {
+ PCI_SATA_MUXREG,
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = PCIE_CFG_VAL(0),
+ .val = PCIE_CFG_VAL(0),
+ },
+};
+
+static struct spear_modemux pcie0_modemux[] = {
+ {
+ .muxregs = pcie0_muxreg,
+ .nmuxregs = ARRAY_SIZE(pcie0_muxreg),
+ },
+};
+
+static struct spear_pingroup pcie0_pingroup = {
+ .name = "pcie0_grp",
+ .pins = pci_sata_pins,
+ .npins = ARRAY_SIZE(pci_sata_pins),
+ .modemuxs = pcie0_modemux,
+ .nmodemuxs = ARRAY_SIZE(pcie0_modemux),
+};
+
+/* pad multiplexing for pcie1 device */
+static struct spear_muxreg pcie1_muxreg[] = {
+ PCI_SATA_MUXREG,
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = PCIE_CFG_VAL(1),
+ .val = PCIE_CFG_VAL(1),
+ },
+};
+
+static struct spear_modemux pcie1_modemux[] = {
+ {
+ .muxregs = pcie1_muxreg,
+ .nmuxregs = ARRAY_SIZE(pcie1_muxreg),
+ },
+};
+
+static struct spear_pingroup pcie1_pingroup = {
+ .name = "pcie1_grp",
+ .pins = pci_sata_pins,
+ .npins = ARRAY_SIZE(pci_sata_pins),
+ .modemuxs = pcie1_modemux,
+ .nmodemuxs = ARRAY_SIZE(pcie1_modemux),
+};
+
+/* pad multiplexing for pcie2 device */
+static struct spear_muxreg pcie2_muxreg[] = {
+ PCI_SATA_MUXREG,
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = PCIE_CFG_VAL(2),
+ .val = PCIE_CFG_VAL(2),
+ },
+};
+
+static struct spear_modemux pcie2_modemux[] = {
+ {
+ .muxregs = pcie2_muxreg,
+ .nmuxregs = ARRAY_SIZE(pcie2_muxreg),
+ },
+};
+
+static struct spear_pingroup pcie2_pingroup = {
+ .name = "pcie2_grp",
+ .pins = pci_sata_pins,
+ .npins = ARRAY_SIZE(pci_sata_pins),
+ .modemuxs = pcie2_modemux,
+ .nmodemuxs = ARRAY_SIZE(pcie2_modemux),
+};
+
+static const char *const pci_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" };
+static struct spear_function pci_function = {
+ .name = "pci",
+ .groups = pci_grps,
+ .ngroups = ARRAY_SIZE(pci_grps),
+};
+
+/* pad multiplexing for sata0 device */
+static struct spear_muxreg sata0_muxreg[] = {
+ PCI_SATA_MUXREG,
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = SATA_CFG_VAL(0),
+ .val = SATA_CFG_VAL(0),
+ },
+};
+
+static struct spear_modemux sata0_modemux[] = {
+ {
+ .muxregs = sata0_muxreg,
+ .nmuxregs = ARRAY_SIZE(sata0_muxreg),
+ },
+};
+
+static struct spear_pingroup sata0_pingroup = {
+ .name = "sata0_grp",
+ .pins = pci_sata_pins,
+ .npins = ARRAY_SIZE(pci_sata_pins),
+ .modemuxs = sata0_modemux,
+ .nmodemuxs = ARRAY_SIZE(sata0_modemux),
+};
+
+/* pad multiplexing for sata1 device */
+static struct spear_muxreg sata1_muxreg[] = {
+ PCI_SATA_MUXREG,
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = SATA_CFG_VAL(1),
+ .val = SATA_CFG_VAL(1),
+ },
+};
+
+static struct spear_modemux sata1_modemux[] = {
+ {
+ .muxregs = sata1_muxreg,
+ .nmuxregs = ARRAY_SIZE(sata1_muxreg),
+ },
+};
+
+static struct spear_pingroup sata1_pingroup = {
+ .name = "sata1_grp",
+ .pins = pci_sata_pins,
+ .npins = ARRAY_SIZE(pci_sata_pins),
+ .modemuxs = sata1_modemux,
+ .nmodemuxs = ARRAY_SIZE(sata1_modemux),
+};
+
+/* pad multiplexing for sata2 device */
+static struct spear_muxreg sata2_muxreg[] = {
+ PCI_SATA_MUXREG,
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = SATA_CFG_VAL(2),
+ .val = SATA_CFG_VAL(2),
+ },
+};
+
+static struct spear_modemux sata2_modemux[] = {
+ {
+ .muxregs = sata2_muxreg,
+ .nmuxregs = ARRAY_SIZE(sata2_muxreg),
+ },
+};
+
+static struct spear_pingroup sata2_pingroup = {
+ .name = "sata2_grp",
+ .pins = pci_sata_pins,
+ .npins = ARRAY_SIZE(pci_sata_pins),
+ .modemuxs = sata2_modemux,
+ .nmodemuxs = ARRAY_SIZE(sata2_modemux),
+};
+
+static const char *const sata_grps[] = { "sata0_grp", "sata1_grp", "sata2_grp"
+};
+static struct spear_function sata_function = {
+ .name = "sata",
+ .groups = sata_grps,
+ .ngroups = ARRAY_SIZE(sata_grps),
+};
+
+/* Pad multiplexing for ssp1_dis_kbd device */
+static const unsigned ssp1_dis_kbd_pins[] = { 203, 204, 205, 206 };
+static struct spear_muxreg ssp1_dis_kbd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK |
+ PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
+ PMX_NFCE2_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux ssp1_dis_kbd_modemux[] = {
+ {
+ .muxregs = ssp1_dis_kbd_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp1_dis_kbd_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp1_dis_kbd_pingroup = {
+ .name = "ssp1_dis_kbd_grp",
+ .pins = ssp1_dis_kbd_pins,
+ .npins = ARRAY_SIZE(ssp1_dis_kbd_pins),
+ .modemuxs = ssp1_dis_kbd_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp1_dis_kbd_modemux),
+};
+
+/* Pad multiplexing for ssp1_dis_sd device */
+static const unsigned ssp1_dis_sd_pins[] = { 224, 226, 227, 228 };
+static struct spear_muxreg ssp1_dis_sd_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
+ PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux ssp1_dis_sd_modemux[] = {
+ {
+ .muxregs = ssp1_dis_sd_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp1_dis_sd_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp1_dis_sd_pingroup = {
+ .name = "ssp1_dis_sd_grp",
+ .pins = ssp1_dis_sd_pins,
+ .npins = ARRAY_SIZE(ssp1_dis_sd_pins),
+ .modemuxs = ssp1_dis_sd_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp1_dis_sd_modemux),
+};
+
+static const char *const ssp1_grps[] = { "ssp1_dis_kbd_grp",
+ "ssp1_dis_sd_grp" };
+static struct spear_function ssp1_function = {
+ .name = "ssp1",
+ .groups = ssp1_grps,
+ .ngroups = ARRAY_SIZE(ssp1_grps),
+};
+
+/* Pad multiplexing for gpt64 device */
+static const unsigned gpt64_pins[] = { 230, 231, 232, 245 };
+static struct spear_muxreg gpt64_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
+ | PMX_MCILEDS_MASK,
+ .val = 0,
+ },
+};
+
+static struct spear_modemux gpt64_modemux[] = {
+ {
+ .muxregs = gpt64_muxreg,
+ .nmuxregs = ARRAY_SIZE(gpt64_muxreg),
+ },
+};
+
+static struct spear_pingroup gpt64_pingroup = {
+ .name = "gpt64_grp",
+ .pins = gpt64_pins,
+ .npins = ARRAY_SIZE(gpt64_pins),
+ .modemuxs = gpt64_modemux,
+ .nmodemuxs = ARRAY_SIZE(gpt64_modemux),
+};
+
+static const char *const gpt64_grps[] = { "gpt64_grp" };
+static struct spear_function gpt64_function = {
+ .name = "gpt64",
+ .groups = gpt64_grps,
+ .ngroups = ARRAY_SIZE(gpt64_grps),
+};
+
+/* pingroups */
+static struct spear_pingroup *spear1310_pingroups[] = {
+ &i2c0_pingroup,
+ &ssp0_pingroup,
+ &i2s0_pingroup,
+ &i2s1_pingroup,
+ &clcd_pingroup,
+ &clcd_high_res_pingroup,
+ &arm_gpio_pingroup,
+ &smi_2_chips_pingroup,
+ &smi_4_chips_pingroup,
+ &gmii_pingroup,
+ &rgmii_pingroup,
+ &smii_0_1_2_pingroup,
+ &ras_mii_txclk_pingroup,
+ &nand_8bit_pingroup,
+ &nand_16bit_pingroup,
+ &nand_4_chips_pingroup,
+ &keyboard_6x6_pingroup,
+ &keyboard_rowcol6_8_pingroup,
+ &uart0_pingroup,
+ &uart0_modem_pingroup,
+ &gpt0_tmr0_pingroup,
+ &gpt0_tmr1_pingroup,
+ &gpt1_tmr0_pingroup,
+ &gpt1_tmr1_pingroup,
+ &sdhci_pingroup,
+ &cf_pingroup,
+ &xd_pingroup,
+ &touch_xy_pingroup,
+ &ssp0_cs0_pingroup,
+ &ssp0_cs1_2_pingroup,
+ &uart_1_dis_i2c_pingroup,
+ &uart_1_dis_sd_pingroup,
+ &uart_2_3_pingroup,
+ &uart_4_pingroup,
+ &uart_5_pingroup,
+ &rs485_0_1_tdm_0_1_pingroup,
+ &i2c_1_2_pingroup,
+ &i2c3_dis_smi_clcd_pingroup,
+ &i2c3_dis_sd_i2s0_pingroup,
+ &i2c_4_5_dis_smi_pingroup,
+ &i2c4_dis_sd_pingroup,
+ &i2c5_dis_sd_pingroup,
+ &i2c_6_7_dis_kbd_pingroup,
+ &i2c6_dis_sd_pingroup,
+ &i2c7_dis_sd_pingroup,
+ &can0_dis_nor_pingroup,
+ &can0_dis_sd_pingroup,
+ &can1_dis_sd_pingroup,
+ &can1_dis_kbd_pingroup,
+ &pcie0_pingroup,
+ &pcie1_pingroup,
+ &pcie2_pingroup,
+ &sata0_pingroup,
+ &sata1_pingroup,
+ &sata2_pingroup,
+ &ssp1_dis_kbd_pingroup,
+ &ssp1_dis_sd_pingroup,
+ &gpt64_pingroup,
+};
+
+/* functions */
+static struct spear_function *spear1310_functions[] = {
+ &i2c0_function,
+ &ssp0_function,
+ &i2s0_function,
+ &i2s1_function,
+ &clcd_function,
+ &arm_gpio_function,
+ &smi_function,
+ &gmii_function,
+ &rgmii_function,
+ &smii_0_1_2_function,
+ &ras_mii_txclk_function,
+ &nand_function,
+ &keyboard_function,
+ &uart0_function,
+ &gpt0_function,
+ &gpt1_function,
+ &sdhci_function,
+ &cf_function,
+ &xd_function,
+ &touch_xy_function,
+ &uart1_function,
+ &uart2_3_function,
+ &uart4_function,
+ &uart5_function,
+ &rs485_0_1_tdm_0_1_function,
+ &i2c_1_2_function,
+ &i2c3_unction,
+ &i2c_4_5_function,
+ &i2c_6_7_function,
+ &can0_function,
+ &can1_function,
+ &pci_function,
+ &sata_function,
+ &ssp1_function,
+ &gpt64_function,
+};
+
+static struct spear_pinctrl_machdata spear1310_machdata = {
+ .pins = spear1310_pins,
+ .npins = ARRAY_SIZE(spear1310_pins),
+ .groups = spear1310_pingroups,
+ .ngroups = ARRAY_SIZE(spear1310_pingroups),
+ .functions = spear1310_functions,
+ .nfunctions = ARRAY_SIZE(spear1310_functions),
+ .modes_supported = false,
+};
+
+static struct of_device_id spear1310_pinctrl_of_match[] __devinitdata = {
+ {
+ .compatible = "st,spear1310-pinmux",
+ },
+ {},
+};
+
+static int __devinit spear1310_pinctrl_probe(struct platform_device *pdev)
+{
+ return spear_pinctrl_probe(pdev, &spear1310_machdata);
+}
+
+static int __devexit spear1310_pinctrl_remove(struct platform_device *pdev)
+{
+ return spear_pinctrl_remove(pdev);
+}
+
+static struct platform_driver spear1310_pinctrl_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = spear1310_pinctrl_of_match,
+ },
+ .probe = spear1310_pinctrl_probe,
+ .remove = __devexit_p(spear1310_pinctrl_remove),
+};
+
+static int __init spear1310_pinctrl_init(void)
+{
+ return platform_driver_register(&spear1310_pinctrl_driver);
+}
+arch_initcall(spear1310_pinctrl_init);
+
+static void __exit spear1310_pinctrl_exit(void)
+{
+ platform_driver_unregister(&spear1310_pinctrl_driver);
+}
+module_exit(spear1310_pinctrl_exit);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
new file mode 100644
index 0000000..a8ab2a6
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -0,0 +1,1989 @@
+/*
+ * Driver for the ST Microelectronics SPEAr1340 pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "pinctrl-spear.h"
+
+#define DRIVER_NAME "spear1340-pinmux"
+
+/* pins */
+static const struct pinctrl_pin_desc spear1340_pins[] = {
+ SPEAR_PIN_0_TO_101,
+ SPEAR_PIN_102_TO_245,
+ PINCTRL_PIN(246, "PLGPIO246"),
+ PINCTRL_PIN(247, "PLGPIO247"),
+ PINCTRL_PIN(248, "PLGPIO248"),
+ PINCTRL_PIN(249, "PLGPIO249"),
+ PINCTRL_PIN(250, "PLGPIO250"),
+ PINCTRL_PIN(251, "PLGPIO251"),
+};
+
+/* In SPEAr1340 there are two levels of pad muxing */
+/* - pads as gpio OR peripherals */
+#define PAD_FUNCTION_EN_1 0x668
+#define PAD_FUNCTION_EN_2 0x66C
+#define PAD_FUNCTION_EN_3 0x670
+#define PAD_FUNCTION_EN_4 0x674
+#define PAD_FUNCTION_EN_5 0x690
+#define PAD_FUNCTION_EN_6 0x694
+#define PAD_FUNCTION_EN_7 0x698
+#define PAD_FUNCTION_EN_8 0x69C
+
+/* - If peripherals, then primary OR alternate peripheral */
+#define PAD_SHARED_IP_EN_1 0x6A0
+#define PAD_SHARED_IP_EN_2 0x6A4
+
+/*
+ * Macro's for first level of pmx - pads as gpio OR peripherals. There are 8
+ * registers with 32 bits each for handling gpio pads, register 8 has only 26
+ * relevant bits.
+ */
+/* macro's for making pads as gpio's */
+#define PADS_AS_GPIO_REG0_MASK 0xFFFFFFFE
+#define PADS_AS_GPIO_REGS_MASK 0xFFFFFFFF
+#define PADS_AS_GPIO_REG7_MASK 0x07FFFFFF
+
+/* macro's for making pads as peripherals */
+#define FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK 0x00000FFE
+#define UART0_ENH_AND_GPT_REG0_MASK 0x0003F000
+#define PWM1_AND_KBD_COL5_REG0_MASK 0x00040000
+#define I2C1_REG0_MASK 0x01080000
+#define SPDIF_IN_REG0_MASK 0x00100000
+#define PWM2_AND_GPT0_TMR0_CPT_REG0_MASK 0x00400000
+#define PWM3_AND_GPT0_TMR1_CLK_REG0_MASK 0x00800000
+#define PWM0_AND_SSP0_CS1_REG0_MASK 0x02000000
+#define VIP_AND_CAM3_REG0_MASK 0xFC200000
+#define VIP_AND_CAM3_REG1_MASK 0x0000000F
+#define VIP_REG1_MASK 0x00001EF0
+#define VIP_AND_CAM2_REG1_MASK 0x007FE100
+#define VIP_AND_CAM1_REG1_MASK 0xFF800000
+#define VIP_AND_CAM1_REG2_MASK 0x00000003
+#define VIP_AND_CAM0_REG2_MASK 0x00001FFC
+#define SMI_REG2_MASK 0x0021E000
+#define SSP0_REG2_MASK 0x001E0000
+#define TS_AND_SSP0_CS2_REG2_MASK 0x00400000
+#define UART0_REG2_MASK 0x01800000
+#define UART1_REG2_MASK 0x06000000
+#define I2S_IN_REG2_MASK 0xF8000000
+#define DEVS_GRP_AND_MIPHY_DBG_REG3_MASK 0x000001FE
+#define I2S_OUT_REG3_MASK 0x000001EF
+#define I2S_IN_REG3_MASK 0x00000010
+#define GMAC_REG3_MASK 0xFFFFFE00
+#define GMAC_REG4_MASK 0x0000001F
+#define DEVS_GRP_AND_MIPHY_DBG_REG4_MASK 0x7FFFFF20
+#define SSP0_CS3_REG4_MASK 0x00000020
+#define I2C0_REG4_MASK 0x000000C0
+#define CEC0_REG4_MASK 0x00000100
+#define CEC1_REG4_MASK 0x00000200
+#define SPDIF_OUT_REG4_MASK 0x00000400
+#define CLCD_REG4_MASK 0x7FFFF800
+#define CLCD_AND_ARM_TRACE_REG4_MASK 0x80000000
+#define CLCD_AND_ARM_TRACE_REG5_MASK 0xFFFFFFFF
+#define CLCD_AND_ARM_TRACE_REG6_MASK 0x00000001
+#define FSMC_PNOR_AND_MCIF_REG6_MASK 0x073FFFFE
+#define MCIF_REG6_MASK 0xF8C00000
+#define MCIF_REG7_MASK 0x000043FF
+#define FSMC_8BIT_REG7_MASK 0x07FFBC00
+
+/* other registers */
+#define PERIP_CFG 0x42C
+ /* PERIP_CFG register masks */
+ #define SSP_CS_CTL_HW 0
+ #define SSP_CS_CTL_SW 1
+ #define SSP_CS_CTL_MASK 1
+ #define SSP_CS_CTL_SHIFT 21
+ #define SSP_CS_VAL_MASK 1
+ #define SSP_CS_VAL_SHIFT 20
+ #define SSP_CS_SEL_CS0 0
+ #define SSP_CS_SEL_CS1 1
+ #define SSP_CS_SEL_CS2 2
+ #define SSP_CS_SEL_MASK 3
+ #define SSP_CS_SEL_SHIFT 18
+
+ #define I2S_CHNL_2_0 (0)
+ #define I2S_CHNL_3_1 (1)
+ #define I2S_CHNL_5_1 (2)
+ #define I2S_CHNL_7_1 (3)
+ #define I2S_CHNL_PLAY_SHIFT (4)
+ #define I2S_CHNL_PLAY_MASK (3 << 4)
+ #define I2S_CHNL_REC_SHIFT (6)
+ #define I2S_CHNL_REC_MASK (3 << 6)
+
+ #define SPDIF_OUT_ENB_MASK (1 << 2)
+ #define SPDIF_OUT_ENB_SHIFT 2
+
+ #define MCIF_SEL_SD 1
+ #define MCIF_SEL_CF 2
+ #define MCIF_SEL_XD 3
+ #define MCIF_SEL_MASK 3
+ #define MCIF_SEL_SHIFT 0
+
+#define GMAC_CLK_CFG 0x248
+ #define GMAC_PHY_IF_GMII_VAL (0 << 3)
+ #define GMAC_PHY_IF_RGMII_VAL (1 << 3)
+ #define GMAC_PHY_IF_SGMII_VAL (2 << 3)
+ #define GMAC_PHY_IF_RMII_VAL (4 << 3)
+ #define GMAC_PHY_IF_SEL_MASK (7 << 3)
+ #define GMAC_PHY_INPUT_ENB_VAL 0
+ #define GMAC_PHY_SYNT_ENB_VAL 1
+ #define GMAC_PHY_CLK_MASK 1
+ #define GMAC_PHY_CLK_SHIFT 2
+ #define GMAC_PHY_125M_PAD_VAL 0
+ #define GMAC_PHY_PLL2_VAL 1
+ #define GMAC_PHY_OSC3_VAL 2
+ #define GMAC_PHY_INPUT_CLK_MASK 3
+ #define GMAC_PHY_INPUT_CLK_SHIFT 0
+
+#define PCIE_SATA_CFG 0x424
+ /* PCIE CFG MASks */
+ #define PCIE_CFG_DEVICE_PRESENT (1 << 11)
+ #define PCIE_CFG_POWERUP_RESET (1 << 10)
+ #define PCIE_CFG_CORE_CLK_EN (1 << 9)
+ #define PCIE_CFG_AUX_CLK_EN (1 << 8)
+ #define SATA_CFG_TX_CLK_EN (1 << 4)
+ #define SATA_CFG_RX_CLK_EN (1 << 3)
+ #define SATA_CFG_POWERUP_RESET (1 << 2)
+ #define SATA_CFG_PM_CLK_EN (1 << 1)
+ #define PCIE_SATA_SEL_PCIE (0)
+ #define PCIE_SATA_SEL_SATA (1)
+ #define SATA_PCIE_CFG_MASK 0xF1F
+ #define PCIE_CFG_VAL (PCIE_SATA_SEL_PCIE | PCIE_CFG_AUX_CLK_EN | \
+ PCIE_CFG_CORE_CLK_EN | PCIE_CFG_POWERUP_RESET |\
+ PCIE_CFG_DEVICE_PRESENT)
+ #define SATA_CFG_VAL (PCIE_SATA_SEL_SATA | SATA_CFG_PM_CLK_EN | \
+ SATA_CFG_POWERUP_RESET | SATA_CFG_RX_CLK_EN | \
+ SATA_CFG_TX_CLK_EN)
+
+/* Macro's for second level of pmx - pads as primary OR alternate peripheral */
+/* Write 0 to enable FSMC_16_BIT */
+#define KBD_ROW_COL_MASK (1 << 0)
+
+/* Write 0 to enable UART0_ENH */
+#define GPT_MASK (1 << 1) /* Only clk & cpt */
+
+/* Write 0 to enable PWM1 */
+#define KBD_COL5_MASK (1 << 2)
+
+/* Write 0 to enable PWM2 */
+#define GPT0_TMR0_CPT_MASK (1 << 3) /* Only clk & cpt */
+
+/* Write 0 to enable PWM3 */
+#define GPT0_TMR1_CLK_MASK (1 << 4) /* Only clk & cpt */
+
+/* Write 0 to enable PWM0 */
+#define SSP0_CS1_MASK (1 << 5)
+
+/* Write 0 to enable VIP */
+#define CAM3_MASK (1 << 6)
+
+/* Write 0 to enable VIP */
+#define CAM2_MASK (1 << 7)
+
+/* Write 0 to enable VIP */
+#define CAM1_MASK (1 << 8)
+
+/* Write 0 to enable VIP */
+#define CAM0_MASK (1 << 9)
+
+/* Write 0 to enable TS */
+#define SSP0_CS2_MASK (1 << 10)
+
+/* Write 0 to enable FSMC PNOR */
+#define MCIF_MASK (1 << 11)
+
+/* Write 0 to enable CLCD */
+#define ARM_TRACE_MASK (1 << 12)
+
+/* Write 0 to enable I2S, SSP0_CS2, CEC0, 1, SPDIF out, CLCD */
+#define MIPHY_DBG_MASK (1 << 13)
+
+/*
+ * Pad multiplexing for making all pads as gpio's. This is done to override the
+ * values passed from bootloader and start from scratch.
+ */
+static const unsigned pads_as_gpio_pins[] = { 251 };
+static struct spear_muxreg pads_as_gpio_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PADS_AS_GPIO_REG0_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PADS_AS_GPIO_REGS_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = PADS_AS_GPIO_REGS_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_4,
+ .mask = PADS_AS_GPIO_REGS_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = PADS_AS_GPIO_REGS_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_6,
+ .mask = PADS_AS_GPIO_REGS_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_7,
+ .mask = PADS_AS_GPIO_REGS_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_8,
+ .mask = PADS_AS_GPIO_REG7_MASK,
+ .val = 0x0,
+ },
+};
+
+static struct spear_modemux pads_as_gpio_modemux[] = {
+ {
+ .muxregs = pads_as_gpio_muxreg,
+ .nmuxregs = ARRAY_SIZE(pads_as_gpio_muxreg),
+ },
+};
+
+static struct spear_pingroup pads_as_gpio_pingroup = {
+ .name = "pads_as_gpio_grp",
+ .pins = pads_as_gpio_pins,
+ .npins = ARRAY_SIZE(pads_as_gpio_pins),
+ .modemuxs = pads_as_gpio_modemux,
+ .nmodemuxs = ARRAY_SIZE(pads_as_gpio_modemux),
+};
+
+static const char *const pads_as_gpio_grps[] = { "pads_as_gpio_grp" };
+static struct spear_function pads_as_gpio_function = {
+ .name = "pads_as_gpio",
+ .groups = pads_as_gpio_grps,
+ .ngroups = ARRAY_SIZE(pads_as_gpio_grps),
+};
+
+/* Pad multiplexing for fsmc_8bit device */
+static const unsigned fsmc_8bit_pins[] = { 233, 234, 235, 236, 238, 239, 240,
+ 241, 242, 243, 244, 245, 246, 247, 248, 249 };
+static struct spear_muxreg fsmc_8bit_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_8,
+ .mask = FSMC_8BIT_REG7_MASK,
+ .val = FSMC_8BIT_REG7_MASK,
+ }
+};
+
+static struct spear_modemux fsmc_8bit_modemux[] = {
+ {
+ .muxregs = fsmc_8bit_muxreg,
+ .nmuxregs = ARRAY_SIZE(fsmc_8bit_muxreg),
+ },
+};
+
+static struct spear_pingroup fsmc_8bit_pingroup = {
+ .name = "fsmc_8bit_grp",
+ .pins = fsmc_8bit_pins,
+ .npins = ARRAY_SIZE(fsmc_8bit_pins),
+ .modemuxs = fsmc_8bit_modemux,
+ .nmodemuxs = ARRAY_SIZE(fsmc_8bit_modemux),
+};
+
+/* Pad multiplexing for fsmc_16bit device */
+static const unsigned fsmc_16bit_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
+static struct spear_muxreg fsmc_16bit_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = KBD_ROW_COL_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+ .val = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+ },
+};
+
+static struct spear_modemux fsmc_16bit_modemux[] = {
+ {
+ .muxregs = fsmc_16bit_muxreg,
+ .nmuxregs = ARRAY_SIZE(fsmc_16bit_muxreg),
+ },
+};
+
+static struct spear_pingroup fsmc_16bit_pingroup = {
+ .name = "fsmc_16bit_grp",
+ .pins = fsmc_16bit_pins,
+ .npins = ARRAY_SIZE(fsmc_16bit_pins),
+ .modemuxs = fsmc_16bit_modemux,
+ .nmodemuxs = ARRAY_SIZE(fsmc_16bit_modemux),
+};
+
+/* pad multiplexing for fsmc_pnor device */
+static const unsigned fsmc_pnor_pins[] = { 192, 193, 194, 195, 196, 197, 198,
+ 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212,
+ 215, 216, 217 };
+static struct spear_muxreg fsmc_pnor_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = MCIF_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_7,
+ .mask = FSMC_PNOR_AND_MCIF_REG6_MASK,
+ .val = FSMC_PNOR_AND_MCIF_REG6_MASK,
+ },
+};
+
+static struct spear_modemux fsmc_pnor_modemux[] = {
+ {
+ .muxregs = fsmc_pnor_muxreg,
+ .nmuxregs = ARRAY_SIZE(fsmc_pnor_muxreg),
+ },
+};
+
+static struct spear_pingroup fsmc_pnor_pingroup = {
+ .name = "fsmc_pnor_grp",
+ .pins = fsmc_pnor_pins,
+ .npins = ARRAY_SIZE(fsmc_pnor_pins),
+ .modemuxs = fsmc_pnor_modemux,
+ .nmodemuxs = ARRAY_SIZE(fsmc_pnor_modemux),
+};
+
+static const char *const fsmc_grps[] = { "fsmc_8bit_grp", "fsmc_16bit_grp",
+ "fsmc_pnor_grp" };
+static struct spear_function fsmc_function = {
+ .name = "fsmc",
+ .groups = fsmc_grps,
+ .ngroups = ARRAY_SIZE(fsmc_grps),
+};
+
+/* pad multiplexing for keyboard rows-cols device */
+static const unsigned keyboard_row_col_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
+ 10 };
+static struct spear_muxreg keyboard_row_col_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = KBD_ROW_COL_MASK,
+ .val = KBD_ROW_COL_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+ .val = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+ },
+};
+
+static struct spear_modemux keyboard_row_col_modemux[] = {
+ {
+ .muxregs = keyboard_row_col_muxreg,
+ .nmuxregs = ARRAY_SIZE(keyboard_row_col_muxreg),
+ },
+};
+
+static struct spear_pingroup keyboard_row_col_pingroup = {
+ .name = "keyboard_row_col_grp",
+ .pins = keyboard_row_col_pins,
+ .npins = ARRAY_SIZE(keyboard_row_col_pins),
+ .modemuxs = keyboard_row_col_modemux,
+ .nmodemuxs = ARRAY_SIZE(keyboard_row_col_modemux),
+};
+
+/* pad multiplexing for keyboard col5 device */
+static const unsigned keyboard_col5_pins[] = { 17 };
+static struct spear_muxreg keyboard_col5_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = KBD_COL5_MASK,
+ .val = KBD_COL5_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PWM1_AND_KBD_COL5_REG0_MASK,
+ .val = PWM1_AND_KBD_COL5_REG0_MASK,
+ },
+};
+
+static struct spear_modemux keyboard_col5_modemux[] = {
+ {
+ .muxregs = keyboard_col5_muxreg,
+ .nmuxregs = ARRAY_SIZE(keyboard_col5_muxreg),
+ },
+};
+
+static struct spear_pingroup keyboard_col5_pingroup = {
+ .name = "keyboard_col5_grp",
+ .pins = keyboard_col5_pins,
+ .npins = ARRAY_SIZE(keyboard_col5_pins),
+ .modemuxs = keyboard_col5_modemux,
+ .nmodemuxs = ARRAY_SIZE(keyboard_col5_modemux),
+};
+
+static const char *const keyboard_grps[] = { "keyboard_row_col_grp",
+ "keyboard_col5_grp" };
+static struct spear_function keyboard_function = {
+ .name = "keyboard",
+ .groups = keyboard_grps,
+ .ngroups = ARRAY_SIZE(keyboard_grps),
+};
+
+/* pad multiplexing for spdif_in device */
+static const unsigned spdif_in_pins[] = { 19 };
+static struct spear_muxreg spdif_in_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = SPDIF_IN_REG0_MASK,
+ .val = SPDIF_IN_REG0_MASK,
+ },
+};
+
+static struct spear_modemux spdif_in_modemux[] = {
+ {
+ .muxregs = spdif_in_muxreg,
+ .nmuxregs = ARRAY_SIZE(spdif_in_muxreg),
+ },
+};
+
+static struct spear_pingroup spdif_in_pingroup = {
+ .name = "spdif_in_grp",
+ .pins = spdif_in_pins,
+ .npins = ARRAY_SIZE(spdif_in_pins),
+ .modemuxs = spdif_in_modemux,
+ .nmodemuxs = ARRAY_SIZE(spdif_in_modemux),
+};
+
+static const char *const spdif_in_grps[] = { "spdif_in_grp" };
+static struct spear_function spdif_in_function = {
+ .name = "spdif_in",
+ .groups = spdif_in_grps,
+ .ngroups = ARRAY_SIZE(spdif_in_grps),
+};
+
+/* pad multiplexing for spdif_out device */
+static const unsigned spdif_out_pins[] = { 137 };
+static struct spear_muxreg spdif_out_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = SPDIF_OUT_REG4_MASK,
+ .val = SPDIF_OUT_REG4_MASK,
+ }, {
+ .reg = PERIP_CFG,
+ .mask = SPDIF_OUT_ENB_MASK,
+ .val = SPDIF_OUT_ENB_MASK,
+ }
+};
+
+static struct spear_modemux spdif_out_modemux[] = {
+ {
+ .muxregs = spdif_out_muxreg,
+ .nmuxregs = ARRAY_SIZE(spdif_out_muxreg),
+ },
+};
+
+static struct spear_pingroup spdif_out_pingroup = {
+ .name = "spdif_out_grp",
+ .pins = spdif_out_pins,
+ .npins = ARRAY_SIZE(spdif_out_pins),
+ .modemuxs = spdif_out_modemux,
+ .nmodemuxs = ARRAY_SIZE(spdif_out_modemux),
+};
+
+static const char *const spdif_out_grps[] = { "spdif_out_grp" };
+static struct spear_function spdif_out_function = {
+ .name = "spdif_out",
+ .groups = spdif_out_grps,
+ .ngroups = ARRAY_SIZE(spdif_out_grps),
+};
+
+/* pad multiplexing for gpt_0_1 device */
+static const unsigned gpt_0_1_pins[] = { 11, 12, 13, 14, 15, 16, 21, 22 };
+static struct spear_muxreg gpt_0_1_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = GPT_MASK | GPT0_TMR0_CPT_MASK | GPT0_TMR1_CLK_MASK,
+ .val = GPT_MASK | GPT0_TMR0_CPT_MASK | GPT0_TMR1_CLK_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = UART0_ENH_AND_GPT_REG0_MASK |
+ PWM2_AND_GPT0_TMR0_CPT_REG0_MASK |
+ PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+ .val = UART0_ENH_AND_GPT_REG0_MASK |
+ PWM2_AND_GPT0_TMR0_CPT_REG0_MASK |
+ PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+ },
+};
+
+static struct spear_modemux gpt_0_1_modemux[] = {
+ {
+ .muxregs = gpt_0_1_muxreg,
+ .nmuxregs = ARRAY_SIZE(gpt_0_1_muxreg),
+ },
+};
+
+static struct spear_pingroup gpt_0_1_pingroup = {
+ .name = "gpt_0_1_grp",
+ .pins = gpt_0_1_pins,
+ .npins = ARRAY_SIZE(gpt_0_1_pins),
+ .modemuxs = gpt_0_1_modemux,
+ .nmodemuxs = ARRAY_SIZE(gpt_0_1_modemux),
+};
+
+static const char *const gpt_0_1_grps[] = { "gpt_0_1_grp" };
+static struct spear_function gpt_0_1_function = {
+ .name = "gpt_0_1",
+ .groups = gpt_0_1_grps,
+ .ngroups = ARRAY_SIZE(gpt_0_1_grps),
+};
+
+/* pad multiplexing for pwm0 device */
+static const unsigned pwm0_pins[] = { 24 };
+static struct spear_muxreg pwm0_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = SSP0_CS1_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PWM0_AND_SSP0_CS1_REG0_MASK,
+ .val = PWM0_AND_SSP0_CS1_REG0_MASK,
+ },
+};
+
+static struct spear_modemux pwm0_modemux[] = {
+ {
+ .muxregs = pwm0_muxreg,
+ .nmuxregs = ARRAY_SIZE(pwm0_muxreg),
+ },
+};
+
+static struct spear_pingroup pwm0_pingroup = {
+ .name = "pwm0_grp",
+ .pins = pwm0_pins,
+ .npins = ARRAY_SIZE(pwm0_pins),
+ .modemuxs = pwm0_modemux,
+ .nmodemuxs = ARRAY_SIZE(pwm0_modemux),
+};
+
+/* pad multiplexing for pwm1 device */
+static const unsigned pwm1_pins[] = { 17 };
+static struct spear_muxreg pwm1_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = KBD_COL5_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PWM1_AND_KBD_COL5_REG0_MASK,
+ .val = PWM1_AND_KBD_COL5_REG0_MASK,
+ },
+};
+
+static struct spear_modemux pwm1_modemux[] = {
+ {
+ .muxregs = pwm1_muxreg,
+ .nmuxregs = ARRAY_SIZE(pwm1_muxreg),
+ },
+};
+
+static struct spear_pingroup pwm1_pingroup = {
+ .name = "pwm1_grp",
+ .pins = pwm1_pins,
+ .npins = ARRAY_SIZE(pwm1_pins),
+ .modemuxs = pwm1_modemux,
+ .nmodemuxs = ARRAY_SIZE(pwm1_modemux),
+};
+
+/* pad multiplexing for pwm2 device */
+static const unsigned pwm2_pins[] = { 21 };
+static struct spear_muxreg pwm2_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = GPT0_TMR0_CPT_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PWM2_AND_GPT0_TMR0_CPT_REG0_MASK,
+ .val = PWM2_AND_GPT0_TMR0_CPT_REG0_MASK,
+ },
+};
+
+static struct spear_modemux pwm2_modemux[] = {
+ {
+ .muxregs = pwm2_muxreg,
+ .nmuxregs = ARRAY_SIZE(pwm2_muxreg),
+ },
+};
+
+static struct spear_pingroup pwm2_pingroup = {
+ .name = "pwm2_grp",
+ .pins = pwm2_pins,
+ .npins = ARRAY_SIZE(pwm2_pins),
+ .modemuxs = pwm2_modemux,
+ .nmodemuxs = ARRAY_SIZE(pwm2_modemux),
+};
+
+/* pad multiplexing for pwm3 device */
+static const unsigned pwm3_pins[] = { 22 };
+static struct spear_muxreg pwm3_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = GPT0_TMR1_CLK_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+ .val = PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+ },
+};
+
+static struct spear_modemux pwm3_modemux[] = {
+ {
+ .muxregs = pwm3_muxreg,
+ .nmuxregs = ARRAY_SIZE(pwm3_muxreg),
+ },
+};
+
+static struct spear_pingroup pwm3_pingroup = {
+ .name = "pwm3_grp",
+ .pins = pwm3_pins,
+ .npins = ARRAY_SIZE(pwm3_pins),
+ .modemuxs = pwm3_modemux,
+ .nmodemuxs = ARRAY_SIZE(pwm3_modemux),
+};
+
+static const char *const pwm_grps[] = { "pwm0_grp", "pwm1_grp", "pwm2_grp",
+ "pwm3_grp" };
+static struct spear_function pwm_function = {
+ .name = "pwm",
+ .groups = pwm_grps,
+ .ngroups = ARRAY_SIZE(pwm_grps),
+};
+
+/* pad multiplexing for vip_mux device */
+static const unsigned vip_mux_pins[] = { 35, 36, 37, 38, 40, 41, 42, 43 };
+static struct spear_muxreg vip_mux_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_REG1_MASK,
+ .val = VIP_REG1_MASK,
+ },
+};
+
+static struct spear_modemux vip_mux_modemux[] = {
+ {
+ .muxregs = vip_mux_muxreg,
+ .nmuxregs = ARRAY_SIZE(vip_mux_muxreg),
+ },
+};
+
+static struct spear_pingroup vip_mux_pingroup = {
+ .name = "vip_mux_grp",
+ .pins = vip_mux_pins,
+ .npins = ARRAY_SIZE(vip_mux_pins),
+ .modemuxs = vip_mux_modemux,
+ .nmodemuxs = ARRAY_SIZE(vip_mux_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam0 (disables cam0) device */
+static const unsigned vip_mux_cam0_pins[] = { 65, 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75 };
+static struct spear_muxreg vip_mux_cam0_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM0_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = VIP_AND_CAM0_REG2_MASK,
+ .val = VIP_AND_CAM0_REG2_MASK,
+ },
+};
+
+static struct spear_modemux vip_mux_cam0_modemux[] = {
+ {
+ .muxregs = vip_mux_cam0_muxreg,
+ .nmuxregs = ARRAY_SIZE(vip_mux_cam0_muxreg),
+ },
+};
+
+static struct spear_pingroup vip_mux_cam0_pingroup = {
+ .name = "vip_mux_cam0_grp",
+ .pins = vip_mux_cam0_pins,
+ .npins = ARRAY_SIZE(vip_mux_cam0_pins),
+ .modemuxs = vip_mux_cam0_modemux,
+ .nmodemuxs = ARRAY_SIZE(vip_mux_cam0_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam1 (disables cam1) device */
+static const unsigned vip_mux_cam1_pins[] = { 54, 55, 56, 57, 58, 59, 60, 61,
+ 62, 63, 64 };
+static struct spear_muxreg vip_mux_cam1_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM1_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_AND_CAM1_REG1_MASK,
+ .val = VIP_AND_CAM1_REG1_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = VIP_AND_CAM1_REG2_MASK,
+ .val = VIP_AND_CAM1_REG2_MASK,
+ },
+};
+
+static struct spear_modemux vip_mux_cam1_modemux[] = {
+ {
+ .muxregs = vip_mux_cam1_muxreg,
+ .nmuxregs = ARRAY_SIZE(vip_mux_cam1_muxreg),
+ },
+};
+
+static struct spear_pingroup vip_mux_cam1_pingroup = {
+ .name = "vip_mux_cam1_grp",
+ .pins = vip_mux_cam1_pins,
+ .npins = ARRAY_SIZE(vip_mux_cam1_pins),
+ .modemuxs = vip_mux_cam1_modemux,
+ .nmodemuxs = ARRAY_SIZE(vip_mux_cam1_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam2 (disables cam2) device */
+static const unsigned vip_mux_cam2_pins[] = { 39, 44, 45, 46, 47, 48, 49, 50,
+ 51, 52, 53 };
+static struct spear_muxreg vip_mux_cam2_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM2_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_AND_CAM2_REG1_MASK,
+ .val = VIP_AND_CAM2_REG1_MASK,
+ },
+};
+
+static struct spear_modemux vip_mux_cam2_modemux[] = {
+ {
+ .muxregs = vip_mux_cam2_muxreg,
+ .nmuxregs = ARRAY_SIZE(vip_mux_cam2_muxreg),
+ },
+};
+
+static struct spear_pingroup vip_mux_cam2_pingroup = {
+ .name = "vip_mux_cam2_grp",
+ .pins = vip_mux_cam2_pins,
+ .npins = ARRAY_SIZE(vip_mux_cam2_pins),
+ .modemuxs = vip_mux_cam2_modemux,
+ .nmodemuxs = ARRAY_SIZE(vip_mux_cam2_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam3 (disables cam3) device */
+static const unsigned vip_mux_cam3_pins[] = { 20, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34 };
+static struct spear_muxreg vip_mux_cam3_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM3_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = VIP_AND_CAM3_REG0_MASK,
+ .val = VIP_AND_CAM3_REG0_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_AND_CAM3_REG1_MASK,
+ .val = VIP_AND_CAM3_REG1_MASK,
+ },
+};
+
+static struct spear_modemux vip_mux_cam3_modemux[] = {
+ {
+ .muxregs = vip_mux_cam3_muxreg,
+ .nmuxregs = ARRAY_SIZE(vip_mux_cam3_muxreg),
+ },
+};
+
+static struct spear_pingroup vip_mux_cam3_pingroup = {
+ .name = "vip_mux_cam3_grp",
+ .pins = vip_mux_cam3_pins,
+ .npins = ARRAY_SIZE(vip_mux_cam3_pins),
+ .modemuxs = vip_mux_cam3_modemux,
+ .nmodemuxs = ARRAY_SIZE(vip_mux_cam3_modemux),
+};
+
+static const char *const vip_grps[] = { "vip_mux_grp", "vip_mux_cam0_grp" ,
+ "vip_mux_cam1_grp" , "vip_mux_cam2_grp", "vip_mux_cam3_grp" };
+static struct spear_function vip_function = {
+ .name = "vip",
+ .groups = vip_grps,
+ .ngroups = ARRAY_SIZE(vip_grps),
+};
+
+/* pad multiplexing for cam0 device */
+static const unsigned cam0_pins[] = { 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75
+};
+static struct spear_muxreg cam0_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM0_MASK,
+ .val = CAM0_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = VIP_AND_CAM0_REG2_MASK,
+ .val = VIP_AND_CAM0_REG2_MASK,
+ },
+};
+
+static struct spear_modemux cam0_modemux[] = {
+ {
+ .muxregs = cam0_muxreg,
+ .nmuxregs = ARRAY_SIZE(cam0_muxreg),
+ },
+};
+
+static struct spear_pingroup cam0_pingroup = {
+ .name = "cam0_grp",
+ .pins = cam0_pins,
+ .npins = ARRAY_SIZE(cam0_pins),
+ .modemuxs = cam0_modemux,
+ .nmodemuxs = ARRAY_SIZE(cam0_modemux),
+};
+
+static const char *const cam0_grps[] = { "cam0_grp" };
+static struct spear_function cam0_function = {
+ .name = "cam0",
+ .groups = cam0_grps,
+ .ngroups = ARRAY_SIZE(cam0_grps),
+};
+
+/* pad multiplexing for cam1 device */
+static const unsigned cam1_pins[] = { 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
+};
+static struct spear_muxreg cam1_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM1_MASK,
+ .val = CAM1_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_AND_CAM1_REG1_MASK,
+ .val = VIP_AND_CAM1_REG1_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = VIP_AND_CAM1_REG2_MASK,
+ .val = VIP_AND_CAM1_REG2_MASK,
+ },
+};
+
+static struct spear_modemux cam1_modemux[] = {
+ {
+ .muxregs = cam1_muxreg,
+ .nmuxregs = ARRAY_SIZE(cam1_muxreg),
+ },
+};
+
+static struct spear_pingroup cam1_pingroup = {
+ .name = "cam1_grp",
+ .pins = cam1_pins,
+ .npins = ARRAY_SIZE(cam1_pins),
+ .modemuxs = cam1_modemux,
+ .nmodemuxs = ARRAY_SIZE(cam1_modemux),
+};
+
+static const char *const cam1_grps[] = { "cam1_grp" };
+static struct spear_function cam1_function = {
+ .name = "cam1",
+ .groups = cam1_grps,
+ .ngroups = ARRAY_SIZE(cam1_grps),
+};
+
+/* pad multiplexing for cam2 device */
+static const unsigned cam2_pins[] = { 39, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53
+};
+static struct spear_muxreg cam2_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM2_MASK,
+ .val = CAM2_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_AND_CAM2_REG1_MASK,
+ .val = VIP_AND_CAM2_REG1_MASK,
+ },
+};
+
+static struct spear_modemux cam2_modemux[] = {
+ {
+ .muxregs = cam2_muxreg,
+ .nmuxregs = ARRAY_SIZE(cam2_muxreg),
+ },
+};
+
+static struct spear_pingroup cam2_pingroup = {
+ .name = "cam2_grp",
+ .pins = cam2_pins,
+ .npins = ARRAY_SIZE(cam2_pins),
+ .modemuxs = cam2_modemux,
+ .nmodemuxs = ARRAY_SIZE(cam2_modemux),
+};
+
+static const char *const cam2_grps[] = { "cam2_grp" };
+static struct spear_function cam2_function = {
+ .name = "cam2",
+ .groups = cam2_grps,
+ .ngroups = ARRAY_SIZE(cam2_grps),
+};
+
+/* pad multiplexing for cam3 device */
+static const unsigned cam3_pins[] = { 20, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
+};
+static struct spear_muxreg cam3_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = CAM3_MASK,
+ .val = CAM3_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = VIP_AND_CAM3_REG0_MASK,
+ .val = VIP_AND_CAM3_REG0_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = VIP_AND_CAM3_REG1_MASK,
+ .val = VIP_AND_CAM3_REG1_MASK,
+ },
+};
+
+static struct spear_modemux cam3_modemux[] = {
+ {
+ .muxregs = cam3_muxreg,
+ .nmuxregs = ARRAY_SIZE(cam3_muxreg),
+ },
+};
+
+static struct spear_pingroup cam3_pingroup = {
+ .name = "cam3_grp",
+ .pins = cam3_pins,
+ .npins = ARRAY_SIZE(cam3_pins),
+ .modemuxs = cam3_modemux,
+ .nmodemuxs = ARRAY_SIZE(cam3_modemux),
+};
+
+static const char *const cam3_grps[] = { "cam3_grp" };
+static struct spear_function cam3_function = {
+ .name = "cam3",
+ .groups = cam3_grps,
+ .ngroups = ARRAY_SIZE(cam3_grps),
+};
+
+/* pad multiplexing for smi device */
+static const unsigned smi_pins[] = { 76, 77, 78, 79, 84 };
+static struct spear_muxreg smi_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = SMI_REG2_MASK,
+ .val = SMI_REG2_MASK,
+ },
+};
+
+static struct spear_modemux smi_modemux[] = {
+ {
+ .muxregs = smi_muxreg,
+ .nmuxregs = ARRAY_SIZE(smi_muxreg),
+ },
+};
+
+static struct spear_pingroup smi_pingroup = {
+ .name = "smi_grp",
+ .pins = smi_pins,
+ .npins = ARRAY_SIZE(smi_pins),
+ .modemuxs = smi_modemux,
+ .nmodemuxs = ARRAY_SIZE(smi_modemux),
+};
+
+static const char *const smi_grps[] = { "smi_grp" };
+static struct spear_function smi_function = {
+ .name = "smi",
+ .groups = smi_grps,
+ .ngroups = ARRAY_SIZE(smi_grps),
+};
+
+/* pad multiplexing for ssp0 device */
+static const unsigned ssp0_pins[] = { 80, 81, 82, 83 };
+static struct spear_muxreg ssp0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = SSP0_REG2_MASK,
+ .val = SSP0_REG2_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_modemux[] = {
+ {
+ .muxregs = ssp0_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_pingroup = {
+ .name = "ssp0_grp",
+ .pins = ssp0_pins,
+ .npins = ARRAY_SIZE(ssp0_pins),
+ .modemuxs = ssp0_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_modemux),
+};
+
+/* pad multiplexing for ssp0_cs1 device */
+static const unsigned ssp0_cs1_pins[] = { 24 };
+static struct spear_muxreg ssp0_cs1_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = SSP0_CS1_MASK,
+ .val = SSP0_CS1_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PWM0_AND_SSP0_CS1_REG0_MASK,
+ .val = PWM0_AND_SSP0_CS1_REG0_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_cs1_modemux[] = {
+ {
+ .muxregs = ssp0_cs1_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_cs1_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_cs1_pingroup = {
+ .name = "ssp0_cs1_grp",
+ .pins = ssp0_cs1_pins,
+ .npins = ARRAY_SIZE(ssp0_cs1_pins),
+ .modemuxs = ssp0_cs1_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_cs1_modemux),
+};
+
+/* pad multiplexing for ssp0_cs2 device */
+static const unsigned ssp0_cs2_pins[] = { 85 };
+static struct spear_muxreg ssp0_cs2_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = SSP0_CS2_MASK,
+ .val = SSP0_CS2_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = TS_AND_SSP0_CS2_REG2_MASK,
+ .val = TS_AND_SSP0_CS2_REG2_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_cs2_modemux[] = {
+ {
+ .muxregs = ssp0_cs2_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_cs2_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_cs2_pingroup = {
+ .name = "ssp0_cs2_grp",
+ .pins = ssp0_cs2_pins,
+ .npins = ARRAY_SIZE(ssp0_cs2_pins),
+ .modemuxs = ssp0_cs2_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_cs2_modemux),
+};
+
+/* pad multiplexing for ssp0_cs3 device */
+static const unsigned ssp0_cs3_pins[] = { 132 };
+static struct spear_muxreg ssp0_cs3_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = SSP0_CS3_REG4_MASK,
+ .val = SSP0_CS3_REG4_MASK,
+ },
+};
+
+static struct spear_modemux ssp0_cs3_modemux[] = {
+ {
+ .muxregs = ssp0_cs3_muxreg,
+ .nmuxregs = ARRAY_SIZE(ssp0_cs3_muxreg),
+ },
+};
+
+static struct spear_pingroup ssp0_cs3_pingroup = {
+ .name = "ssp0_cs3_grp",
+ .pins = ssp0_cs3_pins,
+ .npins = ARRAY_SIZE(ssp0_cs3_pins),
+ .modemuxs = ssp0_cs3_modemux,
+ .nmodemuxs = ARRAY_SIZE(ssp0_cs3_modemux),
+};
+
+static const char *const ssp0_grps[] = { "ssp0_grp", "ssp0_cs1_grp",
+ "ssp0_cs2_grp", "ssp0_cs3_grp" };
+static struct spear_function ssp0_function = {
+ .name = "ssp0",
+ .groups = ssp0_grps,
+ .ngroups = ARRAY_SIZE(ssp0_grps),
+};
+
+/* pad multiplexing for uart0 device */
+static const unsigned uart0_pins[] = { 86, 87 };
+static struct spear_muxreg uart0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = UART0_REG2_MASK,
+ .val = UART0_REG2_MASK,
+ },
+};
+
+static struct spear_modemux uart0_modemux[] = {
+ {
+ .muxregs = uart0_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart0_muxreg),
+ },
+};
+
+static struct spear_pingroup uart0_pingroup = {
+ .name = "uart0_grp",
+ .pins = uart0_pins,
+ .npins = ARRAY_SIZE(uart0_pins),
+ .modemuxs = uart0_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart0_modemux),
+};
+
+/* pad multiplexing for uart0_enh device */
+static const unsigned uart0_enh_pins[] = { 11, 12, 13, 14, 15, 16 };
+static struct spear_muxreg uart0_enh_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = GPT_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = UART0_ENH_AND_GPT_REG0_MASK,
+ .val = UART0_ENH_AND_GPT_REG0_MASK,
+ },
+};
+
+static struct spear_modemux uart0_enh_modemux[] = {
+ {
+ .muxregs = uart0_enh_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart0_enh_muxreg),
+ },
+};
+
+static struct spear_pingroup uart0_enh_pingroup = {
+ .name = "uart0_enh_grp",
+ .pins = uart0_enh_pins,
+ .npins = ARRAY_SIZE(uart0_enh_pins),
+ .modemuxs = uart0_enh_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart0_enh_modemux),
+};
+
+static const char *const uart0_grps[] = { "uart0_grp", "uart0_enh_grp" };
+static struct spear_function uart0_function = {
+ .name = "uart0",
+ .groups = uart0_grps,
+ .ngroups = ARRAY_SIZE(uart0_grps),
+};
+
+/* pad multiplexing for uart1 device */
+static const unsigned uart1_pins[] = { 88, 89 };
+static struct spear_muxreg uart1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = UART1_REG2_MASK,
+ .val = UART1_REG2_MASK,
+ },
+};
+
+static struct spear_modemux uart1_modemux[] = {
+ {
+ .muxregs = uart1_muxreg,
+ .nmuxregs = ARRAY_SIZE(uart1_muxreg),
+ },
+};
+
+static struct spear_pingroup uart1_pingroup = {
+ .name = "uart1_grp",
+ .pins = uart1_pins,
+ .npins = ARRAY_SIZE(uart1_pins),
+ .modemuxs = uart1_modemux,
+ .nmodemuxs = ARRAY_SIZE(uart1_modemux),
+};
+
+static const char *const uart1_grps[] = { "uart1_grp" };
+static struct spear_function uart1_function = {
+ .name = "uart1",
+ .groups = uart1_grps,
+ .ngroups = ARRAY_SIZE(uart1_grps),
+};
+
+/* pad multiplexing for i2s_in device */
+static const unsigned i2s_in_pins[] = { 90, 91, 92, 93, 94, 99 };
+static struct spear_muxreg i2s_in_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_3,
+ .mask = I2S_IN_REG2_MASK,
+ .val = I2S_IN_REG2_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_4,
+ .mask = I2S_IN_REG3_MASK,
+ .val = I2S_IN_REG3_MASK,
+ },
+};
+
+static struct spear_modemux i2s_in_modemux[] = {
+ {
+ .muxregs = i2s_in_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2s_in_muxreg),
+ },
+};
+
+static struct spear_pingroup i2s_in_pingroup = {
+ .name = "i2s_in_grp",
+ .pins = i2s_in_pins,
+ .npins = ARRAY_SIZE(i2s_in_pins),
+ .modemuxs = i2s_in_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2s_in_modemux),
+};
+
+/* pad multiplexing for i2s_out device */
+static const unsigned i2s_out_pins[] = { 95, 96, 97, 98, 100, 101, 102, 103 };
+static struct spear_muxreg i2s_out_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_4,
+ .mask = I2S_OUT_REG3_MASK,
+ .val = I2S_OUT_REG3_MASK,
+ },
+};
+
+static struct spear_modemux i2s_out_modemux[] = {
+ {
+ .muxregs = i2s_out_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2s_out_muxreg),
+ },
+};
+
+static struct spear_pingroup i2s_out_pingroup = {
+ .name = "i2s_out_grp",
+ .pins = i2s_out_pins,
+ .npins = ARRAY_SIZE(i2s_out_pins),
+ .modemuxs = i2s_out_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2s_out_modemux),
+};
+
+static const char *const i2s_grps[] = { "i2s_in_grp", "i2s_out_grp" };
+static struct spear_function i2s_function = {
+ .name = "i2s",
+ .groups = i2s_grps,
+ .ngroups = ARRAY_SIZE(i2s_grps),
+};
+
+/* pad multiplexing for gmac device */
+static const unsigned gmac_pins[] = { 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125,
+ 126, 127, 128, 129, 130, 131 };
+#define GMAC_MUXREG \
+ { \
+ .reg = PAD_FUNCTION_EN_4, \
+ .mask = GMAC_REG3_MASK, \
+ .val = GMAC_REG3_MASK, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_5, \
+ .mask = GMAC_REG4_MASK, \
+ .val = GMAC_REG4_MASK, \
+ }
+
+/* pad multiplexing for gmii device */
+static struct spear_muxreg gmii_muxreg[] = {
+ GMAC_MUXREG,
+ {
+ .reg = GMAC_CLK_CFG,
+ .mask = GMAC_PHY_IF_SEL_MASK,
+ .val = GMAC_PHY_IF_GMII_VAL,
+ },
+};
+
+static struct spear_modemux gmii_modemux[] = {
+ {
+ .muxregs = gmii_muxreg,
+ .nmuxregs = ARRAY_SIZE(gmii_muxreg),
+ },
+};
+
+static struct spear_pingroup gmii_pingroup = {
+ .name = "gmii_grp",
+ .pins = gmac_pins,
+ .npins = ARRAY_SIZE(gmac_pins),
+ .modemuxs = gmii_modemux,
+ .nmodemuxs = ARRAY_SIZE(gmii_modemux),
+};
+
+/* pad multiplexing for rgmii device */
+static struct spear_muxreg rgmii_muxreg[] = {
+ GMAC_MUXREG,
+ {
+ .reg = GMAC_CLK_CFG,
+ .mask = GMAC_PHY_IF_SEL_MASK,
+ .val = GMAC_PHY_IF_RGMII_VAL,
+ },
+};
+
+static struct spear_modemux rgmii_modemux[] = {
+ {
+ .muxregs = rgmii_muxreg,
+ .nmuxregs = ARRAY_SIZE(rgmii_muxreg),
+ },
+};
+
+static struct spear_pingroup rgmii_pingroup = {
+ .name = "rgmii_grp",
+ .pins = gmac_pins,
+ .npins = ARRAY_SIZE(gmac_pins),
+ .modemuxs = rgmii_modemux,
+ .nmodemuxs = ARRAY_SIZE(rgmii_modemux),
+};
+
+/* pad multiplexing for rmii device */
+static struct spear_muxreg rmii_muxreg[] = {
+ GMAC_MUXREG,
+ {
+ .reg = GMAC_CLK_CFG,
+ .mask = GMAC_PHY_IF_SEL_MASK,
+ .val = GMAC_PHY_IF_RMII_VAL,
+ },
+};
+
+static struct spear_modemux rmii_modemux[] = {
+ {
+ .muxregs = rmii_muxreg,
+ .nmuxregs = ARRAY_SIZE(rmii_muxreg),
+ },
+};
+
+static struct spear_pingroup rmii_pingroup = {
+ .name = "rmii_grp",
+ .pins = gmac_pins,
+ .npins = ARRAY_SIZE(gmac_pins),
+ .modemuxs = rmii_modemux,
+ .nmodemuxs = ARRAY_SIZE(rmii_modemux),
+};
+
+/* pad multiplexing for sgmii device */
+static struct spear_muxreg sgmii_muxreg[] = {
+ GMAC_MUXREG,
+ {
+ .reg = GMAC_CLK_CFG,
+ .mask = GMAC_PHY_IF_SEL_MASK,
+ .val = GMAC_PHY_IF_SGMII_VAL,
+ },
+};
+
+static struct spear_modemux sgmii_modemux[] = {
+ {
+ .muxregs = sgmii_muxreg,
+ .nmuxregs = ARRAY_SIZE(sgmii_muxreg),
+ },
+};
+
+static struct spear_pingroup sgmii_pingroup = {
+ .name = "sgmii_grp",
+ .pins = gmac_pins,
+ .npins = ARRAY_SIZE(gmac_pins),
+ .modemuxs = sgmii_modemux,
+ .nmodemuxs = ARRAY_SIZE(sgmii_modemux),
+};
+
+static const char *const gmac_grps[] = { "gmii_grp", "rgmii_grp", "rmii_grp",
+ "sgmii_grp" };
+static struct spear_function gmac_function = {
+ .name = "gmac",
+ .groups = gmac_grps,
+ .ngroups = ARRAY_SIZE(gmac_grps),
+};
+
+/* pad multiplexing for i2c0 device */
+static const unsigned i2c0_pins[] = { 133, 134 };
+static struct spear_muxreg i2c0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = I2C0_REG4_MASK,
+ .val = I2C0_REG4_MASK,
+ },
+};
+
+static struct spear_modemux i2c0_modemux[] = {
+ {
+ .muxregs = i2c0_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c0_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c0_pingroup = {
+ .name = "i2c0_grp",
+ .pins = i2c0_pins,
+ .npins = ARRAY_SIZE(i2c0_pins),
+ .modemuxs = i2c0_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c0_modemux),
+};
+
+static const char *const i2c0_grps[] = { "i2c0_grp" };
+static struct spear_function i2c0_function = {
+ .name = "i2c0",
+ .groups = i2c0_grps,
+ .ngroups = ARRAY_SIZE(i2c0_grps),
+};
+
+/* pad multiplexing for i2c1 device */
+static const unsigned i2c1_pins[] = { 18, 23 };
+static struct spear_muxreg i2c1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = I2C1_REG0_MASK,
+ .val = I2C1_REG0_MASK,
+ },
+};
+
+static struct spear_modemux i2c1_modemux[] = {
+ {
+ .muxregs = i2c1_muxreg,
+ .nmuxregs = ARRAY_SIZE(i2c1_muxreg),
+ },
+};
+
+static struct spear_pingroup i2c1_pingroup = {
+ .name = "i2c1_grp",
+ .pins = i2c1_pins,
+ .npins = ARRAY_SIZE(i2c1_pins),
+ .modemuxs = i2c1_modemux,
+ .nmodemuxs = ARRAY_SIZE(i2c1_modemux),
+};
+
+static const char *const i2c1_grps[] = { "i2c1_grp" };
+static struct spear_function i2c1_function = {
+ .name = "i2c1",
+ .groups = i2c1_grps,
+ .ngroups = ARRAY_SIZE(i2c1_grps),
+};
+
+/* pad multiplexing for cec0 device */
+static const unsigned cec0_pins[] = { 135 };
+static struct spear_muxreg cec0_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = CEC0_REG4_MASK,
+ .val = CEC0_REG4_MASK,
+ },
+};
+
+static struct spear_modemux cec0_modemux[] = {
+ {
+ .muxregs = cec0_muxreg,
+ .nmuxregs = ARRAY_SIZE(cec0_muxreg),
+ },
+};
+
+static struct spear_pingroup cec0_pingroup = {
+ .name = "cec0_grp",
+ .pins = cec0_pins,
+ .npins = ARRAY_SIZE(cec0_pins),
+ .modemuxs = cec0_modemux,
+ .nmodemuxs = ARRAY_SIZE(cec0_modemux),
+};
+
+static const char *const cec0_grps[] = { "cec0_grp" };
+static struct spear_function cec0_function = {
+ .name = "cec0",
+ .groups = cec0_grps,
+ .ngroups = ARRAY_SIZE(cec0_grps),
+};
+
+/* pad multiplexing for cec1 device */
+static const unsigned cec1_pins[] = { 136 };
+static struct spear_muxreg cec1_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = CEC1_REG4_MASK,
+ .val = CEC1_REG4_MASK,
+ },
+};
+
+static struct spear_modemux cec1_modemux[] = {
+ {
+ .muxregs = cec1_muxreg,
+ .nmuxregs = ARRAY_SIZE(cec1_muxreg),
+ },
+};
+
+static struct spear_pingroup cec1_pingroup = {
+ .name = "cec1_grp",
+ .pins = cec1_pins,
+ .npins = ARRAY_SIZE(cec1_pins),
+ .modemuxs = cec1_modemux,
+ .nmodemuxs = ARRAY_SIZE(cec1_modemux),
+};
+
+static const char *const cec1_grps[] = { "cec1_grp" };
+static struct spear_function cec1_function = {
+ .name = "cec1",
+ .groups = cec1_grps,
+ .ngroups = ARRAY_SIZE(cec1_grps),
+};
+
+/* pad multiplexing for mcif devices */
+static const unsigned mcif_pins[] = { 193, 194, 195, 196, 197, 198, 199, 200,
+ 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214,
+ 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228,
+ 229, 230, 231, 232, 237 };
+#define MCIF_MUXREG \
+ { \
+ .reg = PAD_SHARED_IP_EN_1, \
+ .mask = MCIF_MASK, \
+ .val = MCIF_MASK, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_7, \
+ .mask = FSMC_PNOR_AND_MCIF_REG6_MASK | MCIF_REG6_MASK, \
+ .val = FSMC_PNOR_AND_MCIF_REG6_MASK | MCIF_REG6_MASK, \
+ }, { \
+ .reg = PAD_FUNCTION_EN_8, \
+ .mask = MCIF_REG7_MASK, \
+ .val = MCIF_REG7_MASK, \
+ }
+
+/* Pad multiplexing for sdhci device */
+static struct spear_muxreg sdhci_muxreg[] = {
+ MCIF_MUXREG,
+ {
+ .reg = PERIP_CFG,
+ .mask = MCIF_SEL_MASK,
+ .val = MCIF_SEL_SD,
+ },
+};
+
+static struct spear_modemux sdhci_modemux[] = {
+ {
+ .muxregs = sdhci_muxreg,
+ .nmuxregs = ARRAY_SIZE(sdhci_muxreg),
+ },
+};
+
+static struct spear_pingroup sdhci_pingroup = {
+ .name = "sdhci_grp",
+ .pins = mcif_pins,
+ .npins = ARRAY_SIZE(mcif_pins),
+ .modemuxs = sdhci_modemux,
+ .nmodemuxs = ARRAY_SIZE(sdhci_modemux),
+};
+
+static const char *const sdhci_grps[] = { "sdhci_grp" };
+static struct spear_function sdhci_function = {
+ .name = "sdhci",
+ .groups = sdhci_grps,
+ .ngroups = ARRAY_SIZE(sdhci_grps),
+};
+
+/* Pad multiplexing for cf device */
+static struct spear_muxreg cf_muxreg[] = {
+ MCIF_MUXREG,
+ {
+ .reg = PERIP_CFG,
+ .mask = MCIF_SEL_MASK,
+ .val = MCIF_SEL_CF,
+ },
+};
+
+static struct spear_modemux cf_modemux[] = {
+ {
+ .muxregs = cf_muxreg,
+ .nmuxregs = ARRAY_SIZE(cf_muxreg),
+ },
+};
+
+static struct spear_pingroup cf_pingroup = {
+ .name = "cf_grp",
+ .pins = mcif_pins,
+ .npins = ARRAY_SIZE(mcif_pins),
+ .modemuxs = cf_modemux,
+ .nmodemuxs = ARRAY_SIZE(cf_modemux),
+};
+
+static const char *const cf_grps[] = { "cf_grp" };
+static struct spear_function cf_function = {
+ .name = "cf",
+ .groups = cf_grps,
+ .ngroups = ARRAY_SIZE(cf_grps),
+};
+
+/* Pad multiplexing for xd device */
+static struct spear_muxreg xd_muxreg[] = {
+ MCIF_MUXREG,
+ {
+ .reg = PERIP_CFG,
+ .mask = MCIF_SEL_MASK,
+ .val = MCIF_SEL_XD,
+ },
+};
+
+static struct spear_modemux xd_modemux[] = {
+ {
+ .muxregs = xd_muxreg,
+ .nmuxregs = ARRAY_SIZE(xd_muxreg),
+ },
+};
+
+static struct spear_pingroup xd_pingroup = {
+ .name = "xd_grp",
+ .pins = mcif_pins,
+ .npins = ARRAY_SIZE(mcif_pins),
+ .modemuxs = xd_modemux,
+ .nmodemuxs = ARRAY_SIZE(xd_modemux),
+};
+
+static const char *const xd_grps[] = { "xd_grp" };
+static struct spear_function xd_function = {
+ .name = "xd",
+ .groups = xd_grps,
+ .ngroups = ARRAY_SIZE(xd_grps),
+};
+
+/* pad multiplexing for clcd device */
+static const unsigned clcd_pins[] = { 138, 139, 140, 141, 142, 143, 144, 145,
+ 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,
+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,
+ 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187,
+ 188, 189, 190, 191 };
+static struct spear_muxreg clcd_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = ARM_TRACE_MASK | MIPHY_DBG_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK,
+ .val = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_6,
+ .mask = CLCD_AND_ARM_TRACE_REG5_MASK,
+ .val = CLCD_AND_ARM_TRACE_REG5_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_7,
+ .mask = CLCD_AND_ARM_TRACE_REG6_MASK,
+ .val = CLCD_AND_ARM_TRACE_REG6_MASK,
+ },
+};
+
+static struct spear_modemux clcd_modemux[] = {
+ {
+ .muxregs = clcd_muxreg,
+ .nmuxregs = ARRAY_SIZE(clcd_muxreg),
+ },
+};
+
+static struct spear_pingroup clcd_pingroup = {
+ .name = "clcd_grp",
+ .pins = clcd_pins,
+ .npins = ARRAY_SIZE(clcd_pins),
+ .modemuxs = clcd_modemux,
+ .nmodemuxs = ARRAY_SIZE(clcd_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_grp" };
+static struct spear_function clcd_function = {
+ .name = "clcd",
+ .groups = clcd_grps,
+ .ngroups = ARRAY_SIZE(clcd_grps),
+};
+
+/* pad multiplexing for arm_trace device */
+static const unsigned arm_trace_pins[] = { 158, 159, 160, 161, 162, 163, 164,
+ 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178,
+ 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192,
+ 193, 194, 195, 196, 197, 198, 199, 200 };
+static struct spear_muxreg arm_trace_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = ARM_TRACE_MASK,
+ .val = ARM_TRACE_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = CLCD_AND_ARM_TRACE_REG4_MASK,
+ .val = CLCD_AND_ARM_TRACE_REG4_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_6,
+ .mask = CLCD_AND_ARM_TRACE_REG5_MASK,
+ .val = CLCD_AND_ARM_TRACE_REG5_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_7,
+ .mask = CLCD_AND_ARM_TRACE_REG6_MASK,
+ .val = CLCD_AND_ARM_TRACE_REG6_MASK,
+ },
+};
+
+static struct spear_modemux arm_trace_modemux[] = {
+ {
+ .muxregs = arm_trace_muxreg,
+ .nmuxregs = ARRAY_SIZE(arm_trace_muxreg),
+ },
+};
+
+static struct spear_pingroup arm_trace_pingroup = {
+ .name = "arm_trace_grp",
+ .pins = arm_trace_pins,
+ .npins = ARRAY_SIZE(arm_trace_pins),
+ .modemuxs = arm_trace_modemux,
+ .nmodemuxs = ARRAY_SIZE(arm_trace_modemux),
+};
+
+static const char *const arm_trace_grps[] = { "arm_trace_grp" };
+static struct spear_function arm_trace_function = {
+ .name = "arm_trace",
+ .groups = arm_trace_grps,
+ .ngroups = ARRAY_SIZE(arm_trace_grps),
+};
+
+/* pad multiplexing for miphy_dbg device */
+static const unsigned miphy_dbg_pins[] = { 96, 97, 98, 99, 100, 101, 102, 103,
+ 132, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+ 148, 149, 150, 151, 152, 153, 154, 155, 156, 157 };
+static struct spear_muxreg miphy_dbg_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = MIPHY_DBG_MASK,
+ .val = MIPHY_DBG_MASK,
+ }, {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = DEVS_GRP_AND_MIPHY_DBG_REG4_MASK,
+ .val = DEVS_GRP_AND_MIPHY_DBG_REG4_MASK,
+ },
+};
+
+static struct spear_modemux miphy_dbg_modemux[] = {
+ {
+ .muxregs = miphy_dbg_muxreg,
+ .nmuxregs = ARRAY_SIZE(miphy_dbg_muxreg),
+ },
+};
+
+static struct spear_pingroup miphy_dbg_pingroup = {
+ .name = "miphy_dbg_grp",
+ .pins = miphy_dbg_pins,
+ .npins = ARRAY_SIZE(miphy_dbg_pins),
+ .modemuxs = miphy_dbg_modemux,
+ .nmodemuxs = ARRAY_SIZE(miphy_dbg_modemux),
+};
+
+static const char *const miphy_dbg_grps[] = { "miphy_dbg_grp" };
+static struct spear_function miphy_dbg_function = {
+ .name = "miphy_dbg",
+ .groups = miphy_dbg_grps,
+ .ngroups = ARRAY_SIZE(miphy_dbg_grps),
+};
+
+/* pad multiplexing for pcie device */
+static const unsigned pcie_pins[] = { 250 };
+static struct spear_muxreg pcie_muxreg[] = {
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = SATA_PCIE_CFG_MASK,
+ .val = PCIE_CFG_VAL,
+ },
+};
+
+static struct spear_modemux pcie_modemux[] = {
+ {
+ .muxregs = pcie_muxreg,
+ .nmuxregs = ARRAY_SIZE(pcie_muxreg),
+ },
+};
+
+static struct spear_pingroup pcie_pingroup = {
+ .name = "pcie_grp",
+ .pins = pcie_pins,
+ .npins = ARRAY_SIZE(pcie_pins),
+ .modemuxs = pcie_modemux,
+ .nmodemuxs = ARRAY_SIZE(pcie_modemux),
+};
+
+static const char *const pcie_grps[] = { "pcie_grp" };
+static struct spear_function pcie_function = {
+ .name = "pcie",
+ .groups = pcie_grps,
+ .ngroups = ARRAY_SIZE(pcie_grps),
+};
+
+/* pad multiplexing for sata device */
+static const unsigned sata_pins[] = { 250 };
+static struct spear_muxreg sata_muxreg[] = {
+ {
+ .reg = PCIE_SATA_CFG,
+ .mask = SATA_PCIE_CFG_MASK,
+ .val = SATA_CFG_VAL,
+ },
+};
+
+static struct spear_modemux sata_modemux[] = {
+ {
+ .muxregs = sata_muxreg,
+ .nmuxregs = ARRAY_SIZE(sata_muxreg),
+ },
+};
+
+static struct spear_pingroup sata_pingroup = {
+ .name = "sata_grp",
+ .pins = sata_pins,
+ .npins = ARRAY_SIZE(sata_pins),
+ .modemuxs = sata_modemux,
+ .nmodemuxs = ARRAY_SIZE(sata_modemux),
+};
+
+static const char *const sata_grps[] = { "sata_grp" };
+static struct spear_function sata_function = {
+ .name = "sata",
+ .groups = sata_grps,
+ .ngroups = ARRAY_SIZE(sata_grps),
+};
+
+/* pingroups */
+static struct spear_pingroup *spear1340_pingroups[] = {
+ &pads_as_gpio_pingroup,
+ &fsmc_8bit_pingroup,
+ &fsmc_16bit_pingroup,
+ &fsmc_pnor_pingroup,
+ &keyboard_row_col_pingroup,
+ &keyboard_col5_pingroup,
+ &spdif_in_pingroup,
+ &spdif_out_pingroup,
+ &gpt_0_1_pingroup,
+ &pwm0_pingroup,
+ &pwm1_pingroup,
+ &pwm2_pingroup,
+ &pwm3_pingroup,
+ &vip_mux_pingroup,
+ &vip_mux_cam0_pingroup,
+ &vip_mux_cam1_pingroup,
+ &vip_mux_cam2_pingroup,
+ &vip_mux_cam3_pingroup,
+ &cam0_pingroup,
+ &cam1_pingroup,
+ &cam2_pingroup,
+ &cam3_pingroup,
+ &smi_pingroup,
+ &ssp0_pingroup,
+ &ssp0_cs1_pingroup,
+ &ssp0_cs2_pingroup,
+ &ssp0_cs3_pingroup,
+ &uart0_pingroup,
+ &uart0_enh_pingroup,
+ &uart1_pingroup,
+ &i2s_in_pingroup,
+ &i2s_out_pingroup,
+ &gmii_pingroup,
+ &rgmii_pingroup,
+ &rmii_pingroup,
+ &sgmii_pingroup,
+ &i2c0_pingroup,
+ &i2c1_pingroup,
+ &cec0_pingroup,
+ &cec1_pingroup,
+ &sdhci_pingroup,
+ &cf_pingroup,
+ &xd_pingroup,
+ &clcd_pingroup,
+ &arm_trace_pingroup,
+ &miphy_dbg_pingroup,
+ &pcie_pingroup,
+ &sata_pingroup,
+};
+
+/* functions */
+static struct spear_function *spear1340_functions[] = {
+ &pads_as_gpio_function,
+ &fsmc_function,
+ &keyboard_function,
+ &spdif_in_function,
+ &spdif_out_function,
+ &gpt_0_1_function,
+ &pwm_function,
+ &vip_function,
+ &cam0_function,
+ &cam1_function,
+ &cam2_function,
+ &cam3_function,
+ &smi_function,
+ &ssp0_function,
+ &uart0_function,
+ &uart1_function,
+ &i2s_function,
+ &gmac_function,
+ &i2c0_function,
+ &i2c1_function,
+ &cec0_function,
+ &cec1_function,
+ &sdhci_function,
+ &cf_function,
+ &xd_function,
+ &clcd_function,
+ &arm_trace_function,
+ &miphy_dbg_function,
+ &pcie_function,
+ &sata_function,
+};
+
+static struct spear_pinctrl_machdata spear1340_machdata = {
+ .pins = spear1340_pins,
+ .npins = ARRAY_SIZE(spear1340_pins),
+ .groups = spear1340_pingroups,
+ .ngroups = ARRAY_SIZE(spear1340_pingroups),
+ .functions = spear1340_functions,
+ .nfunctions = ARRAY_SIZE(spear1340_functions),
+ .modes_supported = false,
+};
+
+static struct of_device_id spear1340_pinctrl_of_match[] __devinitdata = {
+ {
+ .compatible = "st,spear1340-pinmux",
+ },
+ {},
+};
+
+static int __devinit spear1340_pinctrl_probe(struct platform_device *pdev)
+{
+ return spear_pinctrl_probe(pdev, &spear1340_machdata);
+}
+
+static int __devexit spear1340_pinctrl_remove(struct platform_device *pdev)
+{
+ return spear_pinctrl_remove(pdev);
+}
+
+static struct platform_driver spear1340_pinctrl_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = spear1340_pinctrl_of_match,
+ },
+ .probe = spear1340_pinctrl_probe,
+ .remove = __devexit_p(spear1340_pinctrl_remove),
+};
+
+static int __init spear1340_pinctrl_init(void)
+{
+ return platform_driver_register(&spear1340_pinctrl_driver);
+}
+arch_initcall(spear1340_pinctrl_init);
+
+static void __exit spear1340_pinctrl_exit(void)
+{
+ platform_driver_unregister(&spear1340_pinctrl_driver);
+}
+module_exit(spear1340_pinctrl_exit);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c
index 832049a..91c883b 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.c
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c
@@ -15,108 +15,7 @@
/* pins */
static const struct pinctrl_pin_desc spear3xx_pins[] = {
- PINCTRL_PIN(0, "PLGPIO0"),
- PINCTRL_PIN(1, "PLGPIO1"),
- PINCTRL_PIN(2, "PLGPIO2"),
- PINCTRL_PIN(3, "PLGPIO3"),
- PINCTRL_PIN(4, "PLGPIO4"),
- PINCTRL_PIN(5, "PLGPIO5"),
- PINCTRL_PIN(6, "PLGPIO6"),
- PINCTRL_PIN(7, "PLGPIO7"),
- PINCTRL_PIN(8, "PLGPIO8"),
- PINCTRL_PIN(9, "PLGPIO9"),
- PINCTRL_PIN(10, "PLGPIO10"),
- PINCTRL_PIN(11, "PLGPIO11"),
- PINCTRL_PIN(12, "PLGPIO12"),
- PINCTRL_PIN(13, "PLGPIO13"),
- PINCTRL_PIN(14, "PLGPIO14"),
- PINCTRL_PIN(15, "PLGPIO15"),
- PINCTRL_PIN(16, "PLGPIO16"),
- PINCTRL_PIN(17, "PLGPIO17"),
- PINCTRL_PIN(18, "PLGPIO18"),
- PINCTRL_PIN(19, "PLGPIO19"),
- PINCTRL_PIN(20, "PLGPIO20"),
- PINCTRL_PIN(21, "PLGPIO21"),
- PINCTRL_PIN(22, "PLGPIO22"),
- PINCTRL_PIN(23, "PLGPIO23"),
- PINCTRL_PIN(24, "PLGPIO24"),
- PINCTRL_PIN(25, "PLGPIO25"),
- PINCTRL_PIN(26, "PLGPIO26"),
- PINCTRL_PIN(27, "PLGPIO27"),
- PINCTRL_PIN(28, "PLGPIO28"),
- PINCTRL_PIN(29, "PLGPIO29"),
- PINCTRL_PIN(30, "PLGPIO30"),
- PINCTRL_PIN(31, "PLGPIO31"),
- PINCTRL_PIN(32, "PLGPIO32"),
- PINCTRL_PIN(33, "PLGPIO33"),
- PINCTRL_PIN(34, "PLGPIO34"),
- PINCTRL_PIN(35, "PLGPIO35"),
- PINCTRL_PIN(36, "PLGPIO36"),
- PINCTRL_PIN(37, "PLGPIO37"),
- PINCTRL_PIN(38, "PLGPIO38"),
- PINCTRL_PIN(39, "PLGPIO39"),
- PINCTRL_PIN(40, "PLGPIO40"),
- PINCTRL_PIN(41, "PLGPIO41"),
- PINCTRL_PIN(42, "PLGPIO42"),
- PINCTRL_PIN(43, "PLGPIO43"),
- PINCTRL_PIN(44, "PLGPIO44"),
- PINCTRL_PIN(45, "PLGPIO45"),
- PINCTRL_PIN(46, "PLGPIO46"),
- PINCTRL_PIN(47, "PLGPIO47"),
- PINCTRL_PIN(48, "PLGPIO48"),
- PINCTRL_PIN(49, "PLGPIO49"),
- PINCTRL_PIN(50, "PLGPIO50"),
- PINCTRL_PIN(51, "PLGPIO51"),
- PINCTRL_PIN(52, "PLGPIO52"),
- PINCTRL_PIN(53, "PLGPIO53"),
- PINCTRL_PIN(54, "PLGPIO54"),
- PINCTRL_PIN(55, "PLGPIO55"),
- PINCTRL_PIN(56, "PLGPIO56"),
- PINCTRL_PIN(57, "PLGPIO57"),
- PINCTRL_PIN(58, "PLGPIO58"),
- PINCTRL_PIN(59, "PLGPIO59"),
- PINCTRL_PIN(60, "PLGPIO60"),
- PINCTRL_PIN(61, "PLGPIO61"),
- PINCTRL_PIN(62, "PLGPIO62"),
- PINCTRL_PIN(63, "PLGPIO63"),
- PINCTRL_PIN(64, "PLGPIO64"),
- PINCTRL_PIN(65, "PLGPIO65"),
- PINCTRL_PIN(66, "PLGPIO66"),
- PINCTRL_PIN(67, "PLGPIO67"),
- PINCTRL_PIN(68, "PLGPIO68"),
- PINCTRL_PIN(69, "PLGPIO69"),
- PINCTRL_PIN(70, "PLGPIO70"),
- PINCTRL_PIN(71, "PLGPIO71"),
- PINCTRL_PIN(72, "PLGPIO72"),
- PINCTRL_PIN(73, "PLGPIO73"),
- PINCTRL_PIN(74, "PLGPIO74"),
- PINCTRL_PIN(75, "PLGPIO75"),
- PINCTRL_PIN(76, "PLGPIO76"),
- PINCTRL_PIN(77, "PLGPIO77"),
- PINCTRL_PIN(78, "PLGPIO78"),
- PINCTRL_PIN(79, "PLGPIO79"),
- PINCTRL_PIN(80, "PLGPIO80"),
- PINCTRL_PIN(81, "PLGPIO81"),
- PINCTRL_PIN(82, "PLGPIO82"),
- PINCTRL_PIN(83, "PLGPIO83"),
- PINCTRL_PIN(84, "PLGPIO84"),
- PINCTRL_PIN(85, "PLGPIO85"),
- PINCTRL_PIN(86, "PLGPIO86"),
- PINCTRL_PIN(87, "PLGPIO87"),
- PINCTRL_PIN(88, "PLGPIO88"),
- PINCTRL_PIN(89, "PLGPIO89"),
- PINCTRL_PIN(90, "PLGPIO90"),
- PINCTRL_PIN(91, "PLGPIO91"),
- PINCTRL_PIN(92, "PLGPIO92"),
- PINCTRL_PIN(93, "PLGPIO93"),
- PINCTRL_PIN(94, "PLGPIO94"),
- PINCTRL_PIN(95, "PLGPIO95"),
- PINCTRL_PIN(96, "PLGPIO96"),
- PINCTRL_PIN(97, "PLGPIO97"),
- PINCTRL_PIN(98, "PLGPIO98"),
- PINCTRL_PIN(99, "PLGPIO99"),
- PINCTRL_PIN(100, "PLGPIO100"),
- PINCTRL_PIN(101, "PLGPIO101"),
+ SPEAR_PIN_0_TO_101,
};
/* firda_pins */
diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c
index d93a960..891cd6c 100644
--- a/drivers/rtc/rtc-imxdi.c
+++ b/drivers/rtc/rtc-imxdi.c
@@ -405,7 +405,7 @@
imxdi->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(imxdi->clk))
return PTR_ERR(imxdi->clk);
- clk_enable(imxdi->clk);
+ clk_prepare_enable(imxdi->clk);
/*
* Initialize dryice hardware
@@ -470,7 +470,7 @@
return 0;
err:
- clk_disable(imxdi->clk);
+ clk_disable_unprepare(imxdi->clk);
clk_put(imxdi->clk);
return rc;
@@ -487,7 +487,7 @@
rtc_device_unregister(imxdi->rtc);
- clk_disable(imxdi->clk);
+ clk_disable_unprepare(imxdi->clk);
clk_put(imxdi->clk);
return 0;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 00c0240..cd2fe35 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -311,7 +311,7 @@
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+ depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
select S3C64XX_DMA if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 69c9a66..47877d6 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -86,7 +86,8 @@
struct completion xfer_done;
void __iomem *base;
int irq;
- struct clk *clk;
+ struct clk *clk_per;
+ struct clk *clk_ipg;
unsigned long spi_clk;
unsigned int count;
@@ -853,15 +854,22 @@
goto out_free_irq;
}
- spi_imx->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(spi_imx->clk)) {
- dev_err(&pdev->dev, "unable to get clock\n");
- ret = PTR_ERR(spi_imx->clk);
+ spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(spi_imx->clk_ipg)) {
+ ret = PTR_ERR(spi_imx->clk_ipg);
goto out_free_irq;
}
- clk_enable(spi_imx->clk);
- spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
+ spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(spi_imx->clk_per)) {
+ ret = PTR_ERR(spi_imx->clk_per);
+ goto out_free_irq;
+ }
+
+ clk_prepare_enable(spi_imx->clk_per);
+ clk_prepare_enable(spi_imx->clk_ipg);
+
+ spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
spi_imx->devtype_data->reset(spi_imx);
@@ -879,8 +887,8 @@
return ret;
out_clk_put:
- clk_disable(spi_imx->clk);
- clk_put(spi_imx->clk);
+ clk_disable_unprepare(spi_imx->clk_per);
+ clk_disable_unprepare(spi_imx->clk_ipg);
out_free_irq:
free_irq(spi_imx->irq, spi_imx);
out_iounmap:
@@ -908,8 +916,8 @@
spi_bitbang_stop(&spi_imx->bitbang);
writel(0, spi_imx->base + MXC_CSPICTRL);
- clk_disable(spi_imx->clk);
- clk_put(spi_imx->clk);
+ clk_disable_unprepare(spi_imx->clk_per);
+ clk_disable_unprepare(spi_imx->clk_ipg);
free_irq(spi_imx->irq, spi_imx);
iounmap(spi_imx->base);
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index e496f79..dfd04e9 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -16,8 +16,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/module.h>
+#include <linux/clk.h>
#include <asm/unaligned.h>
#define DRIVER_NAME "orion_spi"
@@ -46,6 +46,7 @@
unsigned int max_speed;
unsigned int min_speed;
struct orion_spi_info *spi_info;
+ struct clk *clk;
};
static struct workqueue_struct *orion_spi_wq;
@@ -104,7 +105,7 @@
orion_spi = spi_master_get_devdata(spi->master);
- tclk_hz = orion_spi->spi_info->tclk;
+ tclk_hz = clk_get_rate(orion_spi->clk);
/*
* the supported rates are: 4,6,8...30
@@ -450,6 +451,7 @@
struct orion_spi *spi;
struct resource *r;
struct orion_spi_info *spi_info;
+ unsigned long tclk_hz;
int status = 0;
spi_info = pdev->dev.platform_data;
@@ -476,19 +478,28 @@
spi->master = master;
spi->spi_info = spi_info;
- spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
- spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+ spi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(spi->clk)) {
+ status = PTR_ERR(spi->clk);
+ goto out;
+ }
+
+ clk_prepare(spi->clk);
+ clk_enable(spi->clk);
+ tclk_hz = clk_get_rate(spi->clk);
+ spi->max_speed = DIV_ROUND_UP(tclk_hz, 4);
+ spi->min_speed = DIV_ROUND_UP(tclk_hz, 30);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
status = -ENODEV;
- goto out;
+ goto out_rel_clk;
}
if (!request_mem_region(r->start, resource_size(r),
dev_name(&pdev->dev))) {
status = -EBUSY;
- goto out;
+ goto out_rel_clk;
}
spi->base = ioremap(r->start, SZ_1K);
@@ -508,7 +519,9 @@
out_rel_mem:
release_mem_region(r->start, resource_size(r));
-
+out_rel_clk:
+ clk_disable_unprepare(spi->clk);
+ clk_put(spi->clk);
out:
spi_master_put(master);
return status;
@@ -526,6 +539,9 @@
cancel_work_sync(&spi->work);
+ clk_disable_unprepare(spi->clk);
+ clk_put(spi->clk);
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(r->start, resource_size(r));
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index ec20673..4ef7473 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -205,7 +205,8 @@
unsigned int irda_inv_rx:1;
unsigned int irda_inv_tx:1;
unsigned short trcv_delay; /* transceiver delay */
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_per;
struct imx_uart_data *devdata;
};
@@ -673,7 +674,7 @@
* RFDIV is set such way to satisfy requested uartclk value
*/
val = TXTL << 10 | RXTL;
- ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+ ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
/ sport->port.uartclk;
if(!ufcr_rfdiv)
@@ -1286,7 +1287,7 @@
else
ucfr_rfdiv = 6 - ucfr_rfdiv;
- uartclk = clk_get_rate(sport->clk);
+ uartclk = clk_get_rate(sport->clk_per);
uartclk /= ucfr_rfdiv;
{ /*
@@ -1511,14 +1512,22 @@
goto unmap;
}
- sport->clk = clk_get(&pdev->dev, "uart");
- if (IS_ERR(sport->clk)) {
- ret = PTR_ERR(sport->clk);
+ sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(sport->clk_ipg)) {
+ ret = PTR_ERR(sport->clk_ipg);
goto unmap;
}
- clk_prepare_enable(sport->clk);
- sport->port.uartclk = clk_get_rate(sport->clk);
+ sport->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(sport->clk_per)) {
+ ret = PTR_ERR(sport->clk_per);
+ goto unmap;
+ }
+
+ clk_prepare_enable(sport->clk_per);
+ clk_prepare_enable(sport->clk_ipg);
+
+ sport->port.uartclk = clk_get_rate(sport->clk_per);
imx_ports[sport->port.line] = sport;
@@ -1539,8 +1548,8 @@
if (pdata && pdata->exit)
pdata->exit(pdev);
clkput:
- clk_disable_unprepare(sport->clk);
- clk_put(sport->clk);
+ clk_disable_unprepare(sport->clk_per);
+ clk_disable_unprepare(sport->clk_ipg);
unmap:
iounmap(sport->port.membase);
free:
@@ -1558,11 +1567,10 @@
platform_set_drvdata(pdev, NULL);
- if (sport) {
- uart_remove_one_port(&imx_reg, &sport->port);
- clk_disable_unprepare(sport->clk);
- clk_put(sport->clk);
- }
+ uart_remove_one_port(&imx_reg, &sport->port);
+
+ clk_disable_unprepare(sport->clk_per);
+ clk_disable_unprepare(sport->clk_ipg);
if (pdata && pdata->exit)
pdata->exit(pdev);
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index a797d51..c778ffe 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -32,7 +32,7 @@
#define ULPI_VIEWPORT_OFFSET 0x170
struct ehci_mxc_priv {
- struct clk *usbclk, *ahbclk, *phy1clk;
+ struct clk *usbclk, *ahbclk, *phyclk;
struct usb_hcd *hcd;
};
@@ -166,31 +166,26 @@
}
/* enable clocks */
- priv->usbclk = clk_get(dev, "usb");
+ priv->usbclk = clk_get(dev, "ipg");
if (IS_ERR(priv->usbclk)) {
ret = PTR_ERR(priv->usbclk);
goto err_clk;
}
- clk_enable(priv->usbclk);
+ clk_prepare_enable(priv->usbclk);
- if (!cpu_is_mx35() && !cpu_is_mx25()) {
- priv->ahbclk = clk_get(dev, "usb_ahb");
- if (IS_ERR(priv->ahbclk)) {
- ret = PTR_ERR(priv->ahbclk);
- goto err_clk_ahb;
- }
- clk_enable(priv->ahbclk);
+ priv->ahbclk = clk_get(dev, "ahb");
+ if (IS_ERR(priv->ahbclk)) {
+ ret = PTR_ERR(priv->ahbclk);
+ goto err_clk_ahb;
}
+ clk_prepare_enable(priv->ahbclk);
/* "dr" device has its own clock on i.MX51 */
- if (cpu_is_mx51() && (pdev->id == 0)) {
- priv->phy1clk = clk_get(dev, "usb_phy1");
- if (IS_ERR(priv->phy1clk)) {
- ret = PTR_ERR(priv->phy1clk);
- goto err_clk_phy;
- }
- clk_enable(priv->phy1clk);
- }
+ priv->phyclk = clk_get(dev, "phy");
+ if (IS_ERR(priv->phyclk))
+ priv->phyclk = NULL;
+ if (priv->phyclk)
+ clk_prepare_enable(priv->phyclk);
/* call platform specific init function */
@@ -265,17 +260,15 @@
if (pdata && pdata->exit)
pdata->exit(pdev);
err_init:
- if (priv->phy1clk) {
- clk_disable(priv->phy1clk);
- clk_put(priv->phy1clk);
+ if (priv->phyclk) {
+ clk_disable_unprepare(priv->phyclk);
+ clk_put(priv->phyclk);
}
-err_clk_phy:
- if (priv->ahbclk) {
- clk_disable(priv->ahbclk);
- clk_put(priv->ahbclk);
- }
+
+ clk_disable_unprepare(priv->ahbclk);
+ clk_put(priv->ahbclk);
err_clk_ahb:
- clk_disable(priv->usbclk);
+ clk_disable_unprepare(priv->usbclk);
clk_put(priv->usbclk);
err_clk:
iounmap(hcd->regs);
@@ -307,15 +300,14 @@
usb_put_hcd(hcd);
platform_set_drvdata(pdev, NULL);
- clk_disable(priv->usbclk);
+ clk_disable_unprepare(priv->usbclk);
clk_put(priv->usbclk);
- if (priv->ahbclk) {
- clk_disable(priv->ahbclk);
- clk_put(priv->ahbclk);
- }
- if (priv->phy1clk) {
- clk_disable(priv->phy1clk);
- clk_put(priv->phy1clk);
+ clk_disable_unprepare(priv->ahbclk);
+ clk_put(priv->ahbclk);
+
+ if (priv->phyclk) {
+ clk_disable_unprepare(priv->phyclk);
+ clk_put(priv->phyclk);
}
kfree(priv);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 6c6a5a3..82de107 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
+#include <linux/clk.h>
#include <plat/ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
@@ -198,6 +199,7 @@
struct resource *res;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
+ struct clk *clk;
void __iomem *regs;
int irq, err;
@@ -238,6 +240,14 @@
goto err2;
}
+ /* Not all platforms can gate the clock, so it is not
+ an error if the clock does not exists. */
+ clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+
hcd = usb_create_hcd(&ehci_orion_hc_driver,
&pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
@@ -301,12 +311,18 @@
static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct clk *clk;
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
+ clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+ }
return 0;
}
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 4a44bf8..6854823 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -722,8 +722,9 @@
}
}
- tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
- TEGRA_USB_PHY_MODE_HOST);
+ tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs,
+ pdata->phy_config,
+ TEGRA_USB_PHY_MODE_HOST);
if (IS_ERR(tegra->phy)) {
dev_err(&pdev->dev, "Failed to open USB phy\n");
err = -ENXIO;
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index f135dbe..caad368 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -131,7 +131,9 @@
struct imxfb_info {
struct platform_device *pdev;
void __iomem *regs;
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
/*
* These are the addresses we mapped
@@ -340,7 +342,7 @@
pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
- lcd_clk = clk_get_rate(fbi->clk);
+ lcd_clk = clk_get_rate(fbi->clk_per);
tmp = var->pixclock * (unsigned long long)lcd_clk;
@@ -455,11 +457,17 @@
fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
- if (bl->props.fb_blank != FB_BLANK_UNBLANK)
- clk_enable(fbi->clk);
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK) {
+ clk_prepare_enable(fbi->clk_ipg);
+ clk_prepare_enable(fbi->clk_ahb);
+ clk_prepare_enable(fbi->clk_per);
+ }
writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
- if (bl->props.fb_blank != FB_BLANK_UNBLANK)
- clk_disable(fbi->clk);
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK) {
+ clk_disable_unprepare(fbi->clk_per);
+ clk_disable_unprepare(fbi->clk_ahb);
+ clk_disable_unprepare(fbi->clk_ipg);
+ }
return 0;
}
@@ -522,7 +530,9 @@
*/
writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
- clk_enable(fbi->clk);
+ clk_prepare_enable(fbi->clk_ipg);
+ clk_prepare_enable(fbi->clk_ahb);
+ clk_prepare_enable(fbi->clk_per);
if (fbi->backlight_power)
fbi->backlight_power(1);
@@ -539,7 +549,9 @@
if (fbi->lcd_power)
fbi->lcd_power(0);
- clk_disable(fbi->clk);
+ clk_disable_unprepare(fbi->clk_per);
+ clk_disable_unprepare(fbi->clk_ipg);
+ clk_disable_unprepare(fbi->clk_ahb);
writel(0, fbi->regs + LCDC_RMCR);
}
@@ -770,10 +782,21 @@
goto failed_req;
}
- fbi->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(fbi->clk)) {
- ret = PTR_ERR(fbi->clk);
- dev_err(&pdev->dev, "unable to get clock: %d\n", ret);
+ fbi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(fbi->clk_ipg)) {
+ ret = PTR_ERR(fbi->clk_ipg);
+ goto failed_getclock;
+ }
+
+ fbi->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(fbi->clk_ahb)) {
+ ret = PTR_ERR(fbi->clk_ahb);
+ goto failed_getclock;
+ }
+
+ fbi->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(fbi->clk_per)) {
+ ret = PTR_ERR(fbi->clk_per);
goto failed_getclock;
}
@@ -858,7 +881,6 @@
failed_map:
iounmap(fbi->regs);
failed_ioremap:
- clk_put(fbi->clk);
failed_getclock:
release_mem_region(res->start, resource_size(res));
failed_req:
@@ -895,8 +917,6 @@
iounmap(fbi->regs);
release_mem_region(res->start, resource_size(res));
- clk_disable(fbi->clk);
- clk_put(fbi->clk);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index a3b6a74..1cc61a7 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -138,7 +138,7 @@
goto failed_ioremap;
}
- clk_enable(mdev->clk);
+ clk_prepare_enable(mdev->clk);
__raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER);
mdev->bus_master.data = mdev;
@@ -178,7 +178,7 @@
iounmap(mdev->regs);
release_mem_region(res->start, resource_size(res));
- clk_disable(mdev->clk);
+ clk_disable_unprepare(mdev->clk);
clk_put(mdev->clk);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 7a2b734f..bcfab2b 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -121,7 +121,7 @@
{
if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
/* at our first start we enable clock and do initialisations */
- clk_enable(imx2_wdt.clk);
+ clk_prepare_enable(imx2_wdt.clk);
imx2_wdt_setup();
} else /* delete the timer that pings the watchdog after close */
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 788aa15..0f57369 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -24,8 +24,8 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/clk.h>
#include <mach/bridge-regs.h>
-#include <plat/orion_wdt.h>
/*
* Watchdog timer block registers.
@@ -41,6 +41,7 @@
static bool nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = -1; /* module parameter (seconds) */
static unsigned int wdt_max_duration; /* (seconds) */
+static struct clk *clk;
static unsigned int wdt_tclk;
static void __iomem *wdt_reg;
static unsigned long wdt_status;
@@ -237,16 +238,16 @@
static int __devinit orion_wdt_probe(struct platform_device *pdev)
{
- struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
int ret;
- if (pdata) {
- wdt_tclk = pdata->tclk;
- } else {
- pr_err("misses platform data\n");
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "Orion Watchdog missing clock\n");
return -ENODEV;
}
+ clk_prepare_enable(clk);
+ wdt_tclk = clk_get_rate(clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -282,6 +283,9 @@
if (!ret)
orion_wdt_miscdev.parent = NULL;
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+
return ret;
}
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 125c54e..e2768f1 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -158,9 +158,8 @@
#endif
#ifndef __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-extern pmd_t pmdp_splitting_flush(struct vm_area_struct *vma,
- unsigned long address,
- pmd_t *pmdp);
+extern void pmdp_splitting_flush(struct vm_area_struct *vma,
+ unsigned long address, pmd_t *pmdp);
#endif
#ifndef __HAVE_ARCH_PTE_SAME
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index 5e4312b..eb3f84b 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -30,7 +30,7 @@
const struct clk_ops *ops;
struct clk_hw *hw;
struct clk *parent;
- char **parent_names;
+ const char **parent_names;
struct clk **parents;
u8 num_parents;
unsigned long rate;
@@ -55,12 +55,22 @@
* alternative macro for static initialization
*/
-extern struct clk_ops clk_fixed_rate_ops;
+#define DEFINE_CLK(_name, _ops, _flags, _parent_names, \
+ _parents) \
+ static struct clk _name = { \
+ .name = #_name, \
+ .ops = &_ops, \
+ .hw = &_name##_hw.hw, \
+ .parent_names = _parent_names, \
+ .num_parents = ARRAY_SIZE(_parent_names), \
+ .parents = _parents, \
+ .flags = _flags, \
+ }
#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \
_fixed_rate_flags) \
static struct clk _name; \
- static char *_name##_parent_names[] = {}; \
+ static const char *_name##_parent_names[] = {}; \
static struct clk_fixed_rate _name##_hw = { \
.hw = { \
.clk = &_name, \
@@ -68,23 +78,14 @@
.fixed_rate = _rate, \
.flags = _fixed_rate_flags, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_fixed_rate_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _name##_parent_names, \
- .num_parents = \
- ARRAY_SIZE(_name##_parent_names), \
- .flags = _flags, \
- };
-
-extern struct clk_ops clk_gate_ops;
+ DEFINE_CLK(_name, clk_fixed_rate_ops, _flags, \
+ _name##_parent_names, NULL);
#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \
_flags, _reg, _bit_idx, \
_gate_flags, _lock) \
static struct clk _name; \
- static char *_name##_parent_names[] = { \
+ static const char *_name##_parent_names[] = { \
_parent_name, \
}; \
static struct clk *_name##_parents[] = { \
@@ -99,24 +100,14 @@
.flags = _gate_flags, \
.lock = _lock, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_gate_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _name##_parent_names, \
- .num_parents = \
- ARRAY_SIZE(_name##_parent_names), \
- .parents = _name##_parents, \
- .flags = _flags, \
- };
-
-extern struct clk_ops clk_divider_ops;
+ DEFINE_CLK(_name, clk_gate_ops, _flags, \
+ _name##_parent_names, _name##_parents);
#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \
_flags, _reg, _shift, _width, \
_divider_flags, _lock) \
static struct clk _name; \
- static char *_name##_parent_names[] = { \
+ static const char *_name##_parent_names[] = { \
_parent_name, \
}; \
static struct clk *_name##_parents[] = { \
@@ -132,18 +123,8 @@
.flags = _divider_flags, \
.lock = _lock, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_divider_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _name##_parent_names, \
- .num_parents = \
- ARRAY_SIZE(_name##_parent_names), \
- .parents = _name##_parents, \
- .flags = _flags, \
- };
-
-extern struct clk_ops clk_mux_ops;
+ DEFINE_CLK(_name, clk_divider_ops, _flags, \
+ _name##_parent_names, _name##_parents);
#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \
_reg, _shift, _width, \
@@ -159,16 +140,28 @@
.flags = _mux_flags, \
.lock = _lock, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_mux_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_names, \
- .num_parents = \
- ARRAY_SIZE(_parent_names), \
- .parents = _parents, \
- .flags = _flags, \
- };
+ DEFINE_CLK(_name, clk_mux_ops, _flags, _parent_names, \
+ _parents);
+
+#define DEFINE_CLK_FIXED_FACTOR(_name, _parent_name, \
+ _parent_ptr, _flags, \
+ _mult, _div) \
+ static struct clk _name; \
+ static const char *_name##_parent_names[] = { \
+ _parent_name, \
+ }; \
+ static struct clk *_name##_parents[] = { \
+ _parent_ptr, \
+ }; \
+ static struct clk_fixed_factor _name##_hw = { \
+ .hw = { \
+ .clk = &_name, \
+ }, \
+ .mult = _mult, \
+ .div = _div, \
+ }; \
+ DEFINE_CLK(_name, clk_fixed_factor_ops, _flags, \
+ _name##_parent_names, _name##_parents);
/**
* __clk_init - initialize the data structures in a struct clk
@@ -189,8 +182,12 @@
*
* It is not necessary to call clk_register if __clk_init is used directly with
* statically initialized clock data.
+ *
+ * Returns 0 on success, otherwise an error code.
*/
-void __clk_init(struct device *dev, struct clk *clk);
+int __clk_init(struct device *dev, struct clk *clk);
+
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw);
#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PRIVATE_H */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5508897..4a0b483 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -15,19 +15,6 @@
#ifdef CONFIG_COMMON_CLK
-/**
- * struct clk_hw - handle for traversing from a struct clk to its corresponding
- * hardware-specific structure. struct clk_hw should be declared within struct
- * clk_foo and then referenced by the struct clk instance that uses struct
- * clk_foo's clk_ops
- *
- * clk: pointer to the struct clk instance that points back to this struct
- * clk_hw instance
- */
-struct clk_hw {
- struct clk *clk;
-};
-
/*
* flags used across common struct clk. these flags should only affect the
* top-level framework. custom flags for dealing with hardware specifics
@@ -39,6 +26,8 @@
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
+struct clk_hw;
+
/**
* struct clk_ops - Callback operations for hardware clocks; these are to
* be provided by the clock implementation, and will be called by drivers
@@ -88,19 +77,11 @@
* array index into the value programmed into the hardware.
* Returns 0 on success, -EERROR otherwise.
*
- * @set_rate: Change the rate of this clock. If this callback returns
- * CLK_SET_RATE_PARENT, the rate change will be propagated to the
- * parent clock (which may propagate again if the parent clock
- * also sets this flag). The requested rate of the parent is
- * passed back from the callback in the second 'unsigned long *'
- * argument. Note that it is up to the hardware clock's set_rate
- * implementation to insure that clocks do not run out of spec
- * when propgating the call to set_rate up to the parent. One way
- * to do this is to gate the clock (via clk_disable and/or
- * clk_unprepare) before calling clk_set_rate, then ungating it
- * afterward. If your clock also has the CLK_GATE_SET_RATE flag
- * set then this will insure safety. Returns 0 on success,
- * -EERROR otherwise.
+ * @set_rate: Change the rate of this clock. The requested rate is specified
+ * by the second argument, which should typically be the return
+ * of .round_rate call. The third argument gives the parent rate
+ * which is likely helpful for most .set_rate implementation.
+ * Returns 0 on success, -EERROR otherwise.
*
* The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
* implementations to split any work between atomic (enable) and sleepable
@@ -125,10 +106,46 @@
unsigned long *);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
- int (*set_rate)(struct clk_hw *hw, unsigned long);
+ int (*set_rate)(struct clk_hw *hw, unsigned long,
+ unsigned long);
void (*init)(struct clk_hw *hw);
};
+/**
+ * struct clk_init_data - holds init data that's common to all clocks and is
+ * shared between the clock provider and the common clock framework.
+ *
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ */
+struct clk_init_data {
+ const char *name;
+ const struct clk_ops *ops;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+};
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure. struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * @clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ *
+ * @init: pointer to struct clk_init_data that contains the init data shared
+ * with the common clock framework.
+ */
+struct clk_hw {
+ struct clk *clk;
+ struct clk_init_data *init;
+};
+
/*
* DOC: Basic clock implementations common to many platforms
*
@@ -149,6 +166,7 @@
u8 flags;
};
+extern const struct clk_ops clk_fixed_rate_ops;
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
unsigned long fixed_rate);
@@ -165,7 +183,7 @@
* Clock which can gate its output. Implements .enable & .disable
*
* Flags:
- * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
+ * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
* enable the clock. Setting this flag does the opposite: setting the bit
* disable the clock and clearing it enables the clock
*/
@@ -175,11 +193,11 @@
u8 bit_idx;
u8 flags;
spinlock_t *lock;
- char *parent[1];
};
#define CLK_GATE_SET_TO_DISABLE BIT(0)
+extern const struct clk_ops clk_gate_ops;
struct clk *clk_register_gate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
@@ -212,12 +230,12 @@
u8 width;
u8 flags;
spinlock_t *lock;
- char *parent[1];
};
#define CLK_DIVIDER_ONE_BASED BIT(0)
#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
+extern const struct clk_ops clk_divider_ops;
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -238,7 +256,7 @@
*
* Flags:
* CLK_MUX_INDEX_ONE - register index starts at 1, not 0
- * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
+ * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
*/
struct clk_mux {
struct clk_hw hw;
@@ -252,29 +270,49 @@
#define CLK_MUX_INDEX_ONE BIT(0)
#define CLK_MUX_INDEX_BIT BIT(1)
+extern const struct clk_ops clk_mux_ops;
struct clk *clk_register_mux(struct device *dev, const char *name,
- char **parent_names, u8 num_parents, unsigned long flags,
+ const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
/**
+ * struct clk_fixed_factor - fixed multiplier and divider clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mult: multiplier
+ * @div: divider
+ *
+ * Clock with a fixed multiplier and divider. The output frequency is the
+ * parent clock rate divided by div and multiplied by mult.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ */
+
+struct clk_fixed_factor {
+ struct clk_hw hw;
+ unsigned int mult;
+ unsigned int div;
+};
+
+extern struct clk_ops clk_fixed_factor_ops;
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div);
+
+/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
* @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
*
* clk_register is the primary interface for populating the clock tree with new
* clock nodes. It returns a pointer to the newly allocated struct clk which
* cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
*/
-struct clk *clk_register(struct device *dev, const char *name,
- const struct clk_ops *ops, struct clk_hw *hw,
- char **parent_names, u8 num_parents, unsigned long flags);
+struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+
+void clk_unregister(struct clk *clk);
/* helper functions */
const char *__clk_get_name(struct clk *clk);
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 70cf722..ad5c43e 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -81,7 +81,7 @@
int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
-#endif /* !CONFIG_COMMON_CLK */
+#endif
/**
* clk_get - lookup and obtain a reference to a clock producer.
@@ -252,7 +252,7 @@
* Returns rounded clock rate in Hz, or negative errno.
*/
long clk_round_rate(struct clk *clk, unsigned long rate);
-
+
/**
* clk_set_rate - set the clock rate for a clock source
* @clk: clock source
@@ -261,7 +261,7 @@
* Returns success (0) or negative errno.
*/
int clk_set_rate(struct clk *clk, unsigned long rate);
-
+
/**
* clk_set_parent - set the parent clock source for this clock
* @clk: clock source
diff --git a/include/linux/fsl/mxs-dma.h b/include/linux/fsl/mxs-dma.h
index 203d7c4..55d8702 100644
--- a/include/linux/fsl/mxs-dma.h
+++ b/include/linux/fsl/mxs-dma.h
@@ -15,14 +15,6 @@
int chan_irq;
};
-static inline int mxs_dma_is_apbh(struct dma_chan *chan)
-{
- return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh");
-}
-
-static inline int mxs_dma_is_apbx(struct dma_chan *chan)
-{
- return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx");
-}
-
+extern int mxs_dma_is_apbh(struct dma_chan *chan);
+extern int mxs_dma_is_apbx(struct dma_chan *chan);
#endif /* __MACH_MXS_DMA_H__ */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 000837e..d5d6bbe 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -284,6 +284,14 @@
#include <asm/hugetlb.h>
+#ifndef arch_make_huge_pte
+static inline pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
+ struct page *page, int writable)
+{
+ return entry;
+}
+#endif
+
static inline struct hstate *page_hstate(struct page *page)
{
return size_to_hstate(PAGE_SIZE << compound_order(page));
diff --git a/include/linux/gpio-i2cmux.h b/include/linux/i2c-mux-gpio.h
similarity index 74%
rename from include/linux/gpio-i2cmux.h
rename to include/linux/i2c-mux-gpio.h
index 4a333bb..a36343a3 100644
--- a/include/linux/gpio-i2cmux.h
+++ b/include/linux/i2c-mux-gpio.h
@@ -1,5 +1,5 @@
/*
- * gpio-i2cmux interface to platform code
+ * i2c-mux-gpio interface to platform code
*
* Peter Korsgaard <peter.korsgaard@barco.com>
*
@@ -8,14 +8,14 @@
* published by the Free Software Foundation.
*/
-#ifndef _LINUX_GPIO_I2CMUX_H
-#define _LINUX_GPIO_I2CMUX_H
+#ifndef _LINUX_I2C_MUX_GPIO_H
+#define _LINUX_I2C_MUX_GPIO_H
/* MUX has no specific idle mode */
-#define GPIO_I2CMUX_NO_IDLE ((unsigned)-1)
+#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1)
/**
- * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux
+ * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio
* @parent: Parent I2C bus adapter number
* @base_nr: Base I2C bus number to number adapters from or zero for dynamic
* @values: Array of bitmasks of GPIO settings (low/high) for each
@@ -25,7 +25,7 @@
* @n_gpios: Number of GPIOs used to control MUX
* @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
*/
-struct gpio_i2cmux_platform_data {
+struct i2c_mux_gpio_platform_data {
int parent;
int base_nr;
const unsigned *values;
@@ -35,4 +35,4 @@
unsigned idle;
};
-#endif /* _LINUX_GPIO_I2CMUX_H */
+#endif /* _LINUX_I2C_MUX_GPIO_H */
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 747f0cd..c790838 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -34,7 +34,8 @@
* mux control.
*/
struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
- void *mux_dev, u32 force_nr, u32 chan_id,
+ struct device *mux_dev,
+ void *mux_priv, u32 force_nr, u32 chan_id,
int (*select) (struct i2c_adapter *,
void *mux_dev, u32 chan_id),
int (*deselect) (struct i2c_adapter *,
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 195d8b3..b66cb60 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -232,6 +232,7 @@
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
extern struct i2c_client *i2c_verify_client(struct device *dev);
+extern struct i2c_adapter *i2c_verify_adapter(struct device *dev);
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
diff --git a/arch/arm/mach-mxs/include/mach/mmc.h b/include/linux/mmc/mxs-mmc.h
similarity index 80%
rename from arch/arm/mach-mxs/include/mach/mmc.h
rename to include/linux/mmc/mxs-mmc.h
index 211547a..7c2ad3a 100644
--- a/arch/arm/mach-mxs/include/mach/mmc.h
+++ b/include/linux/mmc/mxs-mmc.h
@@ -6,8 +6,8 @@
* published by the Free Software Foundation.
*/
-#ifndef __MACH_MXS_MMC_H__
-#define __MACH_MXS_MMC_H__
+#ifndef __LINUX_MMC_MXS_MMC_H__
+#define __LINUX_MMC_MXS_MMC_H__
struct mxs_mmc_platform_data {
int wp_gpio; /* write protect pin */
@@ -15,4 +15,5 @@
#define SLOTF_4_BIT_CAPABLE (1 << 0)
#define SLOTF_8_BIT_CAPABLE (1 << 1)
};
-#endif /* __MACH_MXS_MMC_H__ */
+
+#endif /* __LINUX_MMC_MXS_MMC_H__ */
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index 30b0c4e..51bf8ad 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -18,7 +18,6 @@
struct mv643xx_eth_shared_platform_data {
struct mbus_dram_target_info *dram;
struct platform_device *shared_smi;
- unsigned int t_clk;
/*
* Max packet size for Tx IP/Layer 4 checksum, when set to 0, default
* limit of 9KiB will be used.
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index 0efe8d4..1cb775f 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -20,6 +20,10 @@
/* must call put_device() when done with returned i2c_client device */
extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+/* must call put_device() when done with returned i2c_adapter device */
+extern struct i2c_adapter *of_find_i2c_adapter_by_node(
+ struct device_node *node);
+
#else
static inline void of_i2c_register_devices(struct i2c_adapter *adap)
{
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
deleted file mode 100644
index b4d9fa6..0000000
--- a/include/linux/spi/orion_spi.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * orion_spi.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_SPI_ORION_SPI_H
-#define __LINUX_SPI_ORION_SPI_H
-
-struct orion_spi_info {
- u32 tclk; /* no <linux/clk.h> support yet */
-};
-
-
-#endif
diff --git a/include/linux/stmp_device.h b/include/linux/stmp_device.h
new file mode 100644
index 0000000..6cf7ec9
--- /dev/null
+++ b/include/linux/stmp_device.h
@@ -0,0 +1,20 @@
+/*
+ * basic functions for devices following the "stmp" style register layout
+ *
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __STMP_DEVICE_H__
+#define __STMP_DEVICE_H__
+
+#define STMP_OFFSET_REG_SET 0x4
+#define STMP_OFFSET_REG_CLR 0x8
+#define STMP_OFFSET_REG_TOG 0xc
+
+extern int stmp_reset_block(void __iomem *);
+#endif /* __STMP_DEVICE_H__ */
diff --git a/lib/Kconfig b/lib/Kconfig
index 64ddc44..a9e1540 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -39,6 +39,9 @@
boolean
default n
+config STMP_DEVICE
+ bool
+
config CRC_CCITT
tristate "CRC-CCITT functions"
help
diff --git a/lib/Makefile b/lib/Makefile
index 77937a7..8c31a0c 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -128,6 +128,8 @@
obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o
+obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
+
hostprogs-y := gen_crc32table
clean-files := crc32table.h
diff --git a/lib/stmp_device.c b/lib/stmp_device.c
new file mode 100644
index 0000000..8ac9bcc
--- /dev/null
+++ b/lib/stmp_device.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/stmp_device.h>
+
+#define STMP_MODULE_CLKGATE (1 << 30)
+#define STMP_MODULE_SFTRST (1 << 31)
+
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int stmp_clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ writel(mask, addr + STMP_OFFSET_REG_CLR);
+ udelay(1);
+ while ((readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+int stmp_reset_block(void __iomem *reset_addr)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ writel(STMP_MODULE_CLKGATE, reset_addr + STMP_OFFSET_REG_CLR);
+
+ /* set SFTRST to reset the block */
+ writel(STMP_MODULE_SFTRST, reset_addr + STMP_OFFSET_REG_SET);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(readl(reset_addr) & STMP_MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+
+ /* clear and poll SFTRST */
+ ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
+EXPORT_SYMBOL(stmp_reset_block);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index ae8f708..4e28416 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2213,6 +2213,7 @@
}
entry = pte_mkyoung(entry);
entry = pte_mkhuge(entry);
+ entry = arch_make_huge_pte(entry, vma, page, writable);
return entry;
}
diff --git a/mm/pgtable-generic.c b/mm/pgtable-generic.c
index 5a74fea..74c0dda 100644
--- a/mm/pgtable-generic.c
+++ b/mm/pgtable-generic.c
@@ -109,8 +109,8 @@
#ifndef __HAVE_ARCH_PMDP_SPLITTING_FLUSH
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-pmd_t pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
- pmd_t *pmdp)
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp)
{
pmd_t pmd = pmd_mksplitting(*pmdp);
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index 3cb9aa4..fa45567 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/mbus.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -449,6 +450,14 @@
priv->burst = data->burst;
+ priv->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "no clock\n");
+ err = PTR_ERR(priv->clk);
+ goto err_ioremap;
+ }
+ clk_prepare_enable(priv->clk);
+
return snd_soc_register_dai(&pdev->dev, &kirkwood_i2s_dai);
err_ioremap:
@@ -466,6 +475,10 @@
struct kirkwood_dma_data *priv = dev_get_drvdata(&pdev->dev);
snd_soc_unregister_dai(&pdev->dev);
+
+ clk_disable_unprepare(priv->clk);
+ clk_put(priv->clk);
+
iounmap(priv->io);
release_mem_region(priv->mem->start, SZ_16K);
kfree(priv);
diff --git a/sound/soc/kirkwood/kirkwood.h b/sound/soc/kirkwood/kirkwood.h
index 9047436..f9084d8 100644
--- a/sound/soc/kirkwood/kirkwood.h
+++ b/sound/soc/kirkwood/kirkwood.h
@@ -123,6 +123,7 @@
void __iomem *io;
int irq;
int burst;
+ struct clk *clk;
};
#endif