| These instructions will help you in flashing the prebuilt bootloader |
| and AOSP images(built from sources) on db410c. |
| |
| To flash the bootloader or AOSP images, first boot into fastboot mode. |
| Connect a USB Micro-B cable to the OTG port and your HOST device. |
| Now boot into fastboot mode by pressing and holding S4 button on |
| db410c while switching "ON" the power and wait for following message |
| |
| “fastboot: processing commands” |
| |
| on the serial console on startup. Run the flash-all-aosp.sh script on |
| your Host device to flash boot and AOSP files using fastboot. It |
| assumes that you have already build db410c AOSP images locally, or are |
| flashing factory images. |
| |
| $ ./flash-all-aosp.sh |
| |
| Follow detailed flashing and board recovery instructions here |
| https://www.96boards.org/documentation/consumer/dragonboard410c/installation/linux-fastboot.md.html |