diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ar b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ar
new file mode 100755
index 0000000..86dfab6
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ar
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/as b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/as
new file mode 100755
index 0000000..4680034
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/as
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld
new file mode 100755
index 0000000..2f501eb
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld.bfd b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld.bfd
new file mode 100755
index 0000000..0bed003
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld.bfd
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld.gold b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld.gold
new file mode 100755
index 0000000..2f501eb
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ld.gold
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/nm b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/nm
new file mode 100755
index 0000000..ed37553
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/nm
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/objcopy b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/objcopy
new file mode 100755
index 0000000..84fc19d
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/objcopy
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/objdump b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/objdump
new file mode 100755
index 0000000..52272a8
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/objdump
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ranlib b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ranlib
new file mode 100755
index 0000000..619c20b
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/ranlib
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/readelf b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/readelf
new file mode 100755
index 0000000..c1e7041
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/readelf
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/strip b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/strip
new file mode 100755
index 0000000..496aff4
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/bin/strip
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/armv7-a/libatomic.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/armv7-a/libatomic.a
new file mode 100644
index 0000000..73d4100
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/armv7-a/libatomic.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/armv7-a/thumb/libatomic.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/armv7-a/thumb/libatomic.a
new file mode 100644
index 0000000..421149f
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/armv7-a/thumb/libatomic.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.x b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.x
new file mode 100644
index 0000000..5236762
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.x
@@ -0,0 +1,242 @@
+/* Default linker script, for normal executables */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xbn b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xbn
new file mode 100644
index 0000000..6a185a6
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xbn
@@ -0,0 +1,240 @@
+/* Script for -N: mix text and data on same page; don't align data */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = .;
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xc b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xc
new file mode 100644
index 0000000..8da1708
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xc
@@ -0,0 +1,241 @@
+/* Script for -z combreloc: combine and sort reloc sections */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xd b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xd
new file mode 100644
index 0000000..56054e8
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xd
@@ -0,0 +1,242 @@
+/* Script for ld -pie: link position independent executable */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xdc b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xdc
new file mode 100644
index 0000000..acc1bdc
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xdc
@@ -0,0 +1,241 @@
+/* Script for -pie -z combreloc: position independent executable, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xdw b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xdw
new file mode 100644
index 0000000..cd7462f
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xdw
@@ -0,0 +1,241 @@
+/* Script for -pie -z combreloc -z now -z relro: position independent executable, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xn b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xn
new file mode 100644
index 0000000..d89aa6a
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xn
@@ -0,0 +1,242 @@
+/* Script for -n: mix text and data on same page */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xr b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xr
new file mode 100644
index 0000000..75e7914
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xr
@@ -0,0 +1,167 @@
+/* Script for ld -r: link without relocation */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .interp       0 : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash         0 : { *(.hash) }
+  .gnu.hash     0 : { *(.gnu.hash) }
+  .dynsym       0 : { *(.dynsym) }
+  .dynstr       0 : { *(.dynstr) }
+  .gnu.version  0 : { *(.gnu.version) }
+  .gnu.version_d 0: { *(.gnu.version_d) }
+  .gnu.version_r 0: { *(.gnu.version_r) }
+  .rel.init     0 : { *(.rel.init) }
+  .rela.init    0 : { *(.rela.init) }
+  .rel.text     0 : { *(.rel.text) }
+  .rela.text    0 : { *(.rela.text) }
+  .rel.fini     0 : { *(.rel.fini) }
+  .rela.fini    0 : { *(.rela.fini) }
+  .rel.rodata   0 : { *(.rel.rodata) }
+  .rela.rodata  0 : { *(.rela.rodata) }
+  .rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
+  .rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
+  .rel.data     0 : { *(.rel.data) }
+  .rela.data    0 : { *(.rela.data) }
+  .rel.tdata	0 : { *(.rel.tdata) }
+  .rela.tdata	0 : { *(.rela.tdata) }
+  .rel.tbss	0 : { *(.rel.tbss) }
+  .rela.tbss	0 : { *(.rela.tbss) }
+  .rel.ctors    0 : { *(.rel.ctors) }
+  .rela.ctors   0 : { *(.rela.ctors) }
+  .rel.dtors    0 : { *(.rel.dtors) }
+  .rela.dtors   0 : { *(.rela.dtors) }
+  .rel.got      0 : { *(.rel.got) }
+  .rela.got     0 : { *(.rela.got) }
+  .rel.bss      0 : { *(.rel.bss) }
+  .rela.bss     0 : { *(.rela.bss) }
+  .rel.iplt     0 :
+    {
+      *(.rel.iplt)
+    }
+  .rela.iplt    0 :
+    {
+      *(.rela.iplt)
+    }
+  .rel.plt      0 :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt     0 :
+    {
+      *(.rela.plt)
+    }
+  .init         0 :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt          0 : { *(.plt) }
+  .iplt         0 : { *(.iplt) }
+  .text         0 :
+  {
+    *(.text .stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+  }
+  .fini         0 :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  .rodata       0 : { *(.rodata) }
+  .rodata1      0 : { *(.rodata1) }
+  .ARM.extab 0 : { *(.ARM.extab) }
+  .ARM.exidx 0 : { *(.ARM.exidx) }
+  .eh_frame_hdr : { *(.eh_frame_hdr)  }
+  .eh_frame     0 : ONLY_IF_RO { KEEP (*(.eh_frame))  }
+  .gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab 0 : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  /* Exception handling  */
+  .eh_frame     0 : ONLY_IF_RW { KEEP (*(.eh_frame))  }
+  .gnu_extab    0 : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	0 : { *(.tdata) }
+  .tbss		0 : { *(.tbss) }
+  .preinit_array   0 :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .jcr          0 : { KEEP (*(.jcr)) }
+  .dynamic      0 : { *(.dynamic) }
+  .got          0 : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data         0 :
+  {
+    *(.data)
+  }
+  .data1        0 : { *(.data1) }
+  .bss          0 :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+  }
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xs b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xs
new file mode 100644
index 0000000..dad993e
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xs
@@ -0,0 +1,231 @@
+/* Script for ld --shared: link shared library */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      *(.rel.iplt)
+    }
+  .rela.iplt      :
+    {
+      *(.rela.iplt)
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .init_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+  }
+  .fini_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xsc b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xsc
new file mode 100644
index 0000000..24f1781
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xsc
@@ -0,0 +1,230 @@
+/* Script for --shared -z combreloc: shared library, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      *(.rel.iplt)
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      *(.rela.iplt)
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .init_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+  }
+  .fini_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xsw b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xsw
new file mode 100644
index 0000000..63cff69
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xsw
@@ -0,0 +1,230 @@
+/* Script for --shared -z combreloc -z now -z relro: shared library, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      *(.rel.iplt)
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      *(.rela.iplt)
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .init_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+  }
+  .fini_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xu b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xu
new file mode 100644
index 0000000..3a87e08
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xu
@@ -0,0 +1,168 @@
+/* Script for ld -Ur: link w/out relocation, do create constructors */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .interp       0 : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash         0 : { *(.hash) }
+  .gnu.hash     0 : { *(.gnu.hash) }
+  .dynsym       0 : { *(.dynsym) }
+  .dynstr       0 : { *(.dynstr) }
+  .gnu.version  0 : { *(.gnu.version) }
+  .gnu.version_d 0: { *(.gnu.version_d) }
+  .gnu.version_r 0: { *(.gnu.version_r) }
+  .rel.init     0 : { *(.rel.init) }
+  .rela.init    0 : { *(.rela.init) }
+  .rel.text     0 : { *(.rel.text) }
+  .rela.text    0 : { *(.rela.text) }
+  .rel.fini     0 : { *(.rel.fini) }
+  .rela.fini    0 : { *(.rela.fini) }
+  .rel.rodata   0 : { *(.rel.rodata) }
+  .rela.rodata  0 : { *(.rela.rodata) }
+  .rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
+  .rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
+  .rel.data     0 : { *(.rel.data) }
+  .rela.data    0 : { *(.rela.data) }
+  .rel.tdata	0 : { *(.rel.tdata) }
+  .rela.tdata	0 : { *(.rela.tdata) }
+  .rel.tbss	0 : { *(.rel.tbss) }
+  .rela.tbss	0 : { *(.rela.tbss) }
+  .rel.ctors    0 : { *(.rel.ctors) }
+  .rela.ctors   0 : { *(.rela.ctors) }
+  .rel.dtors    0 : { *(.rel.dtors) }
+  .rela.dtors   0 : { *(.rela.dtors) }
+  .rel.got      0 : { *(.rel.got) }
+  .rela.got     0 : { *(.rela.got) }
+  .rel.bss      0 : { *(.rel.bss) }
+  .rela.bss     0 : { *(.rela.bss) }
+  .rel.iplt     0 :
+    {
+      *(.rel.iplt)
+    }
+  .rela.iplt    0 :
+    {
+      *(.rela.iplt)
+    }
+  .rel.plt      0 :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt     0 :
+    {
+      *(.rela.plt)
+    }
+  .init         0 :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt          0 : { *(.plt) }
+  .iplt         0 : { *(.iplt) }
+  .text         0 :
+  {
+    *(.text .stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+  }
+  .fini         0 :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  .rodata       0 : { *(.rodata) }
+  .rodata1      0 : { *(.rodata1) }
+  .ARM.extab 0 : { *(.ARM.extab) }
+  .ARM.exidx 0 : { *(.ARM.exidx) }
+  .eh_frame_hdr : { *(.eh_frame_hdr)  }
+  .eh_frame     0 : ONLY_IF_RO { KEEP (*(.eh_frame))  }
+  .gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab 0 : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  /* Exception handling  */
+  .eh_frame     0 : ONLY_IF_RW { KEEP (*(.eh_frame))  }
+  .gnu_extab    0 : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	0 : { *(.tdata) }
+  .tbss		0 : { *(.tbss) }
+  .preinit_array   0 :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .jcr          0 : { KEEP (*(.jcr)) }
+  .dynamic      0 : { *(.dynamic) }
+  .got          0 : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data         0 :
+  {
+    *(.data)
+    SORT(CONSTRUCTORS)
+  }
+  .data1        0 : { *(.data1) }
+  .bss          0 :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+  }
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xw b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xw
new file mode 100644
index 0000000..19fbda1
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelf_linux_eabi.xw
@@ -0,0 +1,241 @@
+/* Script for -z combreloc -z now -z relro: combine and sort reloc sections */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.x b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.x
new file mode 100644
index 0000000..4563a3f
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.x
@@ -0,0 +1,242 @@
+/* Default linker script, for normal executables */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xbn b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xbn
new file mode 100644
index 0000000..6d6c321
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xbn
@@ -0,0 +1,240 @@
+/* Script for -N: mix text and data on same page; don't align data */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = .;
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xc b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xc
new file mode 100644
index 0000000..4be32a3
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xc
@@ -0,0 +1,241 @@
+/* Script for -z combreloc: combine and sort reloc sections */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xd b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xd
new file mode 100644
index 0000000..14e1e85
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xd
@@ -0,0 +1,242 @@
+/* Script for ld -pie: link position independent executable */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xdc b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xdc
new file mode 100644
index 0000000..f2cc219
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xdc
@@ -0,0 +1,241 @@
+/* Script for -pie -z combreloc: position independent executable, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xdw b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xdw
new file mode 100644
index 0000000..aa80f5a
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xdw
@@ -0,0 +1,241 @@
+/* Script for -pie -z combreloc -z now -z relro: position independent executable, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xn b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xn
new file mode 100644
index 0000000..907e145
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xn
@@ -0,0 +1,242 @@
+/* Script for -n: mix text and data on same page */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.iplt      :
+    {
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xr b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xr
new file mode 100644
index 0000000..daee56a
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xr
@@ -0,0 +1,167 @@
+/* Script for ld -r: link without relocation */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .interp       0 : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash         0 : { *(.hash) }
+  .gnu.hash     0 : { *(.gnu.hash) }
+  .dynsym       0 : { *(.dynsym) }
+  .dynstr       0 : { *(.dynstr) }
+  .gnu.version  0 : { *(.gnu.version) }
+  .gnu.version_d 0: { *(.gnu.version_d) }
+  .gnu.version_r 0: { *(.gnu.version_r) }
+  .rel.init     0 : { *(.rel.init) }
+  .rela.init    0 : { *(.rela.init) }
+  .rel.text     0 : { *(.rel.text) }
+  .rela.text    0 : { *(.rela.text) }
+  .rel.fini     0 : { *(.rel.fini) }
+  .rela.fini    0 : { *(.rela.fini) }
+  .rel.rodata   0 : { *(.rel.rodata) }
+  .rela.rodata  0 : { *(.rela.rodata) }
+  .rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
+  .rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
+  .rel.data     0 : { *(.rel.data) }
+  .rela.data    0 : { *(.rela.data) }
+  .rel.tdata	0 : { *(.rel.tdata) }
+  .rela.tdata	0 : { *(.rela.tdata) }
+  .rel.tbss	0 : { *(.rel.tbss) }
+  .rela.tbss	0 : { *(.rela.tbss) }
+  .rel.ctors    0 : { *(.rel.ctors) }
+  .rela.ctors   0 : { *(.rela.ctors) }
+  .rel.dtors    0 : { *(.rel.dtors) }
+  .rela.dtors   0 : { *(.rela.dtors) }
+  .rel.got      0 : { *(.rel.got) }
+  .rela.got     0 : { *(.rela.got) }
+  .rel.bss      0 : { *(.rel.bss) }
+  .rela.bss     0 : { *(.rela.bss) }
+  .rel.iplt     0 :
+    {
+      *(.rel.iplt)
+    }
+  .rela.iplt    0 :
+    {
+      *(.rela.iplt)
+    }
+  .rel.plt      0 :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt     0 :
+    {
+      *(.rela.plt)
+    }
+  .init         0 :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt          0 : { *(.plt) }
+  .iplt         0 : { *(.iplt) }
+  .text         0 :
+  {
+    *(.text .stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+  }
+  .fini         0 :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  .rodata       0 : { *(.rodata) }
+  .rodata1      0 : { *(.rodata1) }
+  .ARM.extab 0 : { *(.ARM.extab) }
+  .ARM.exidx 0 : { *(.ARM.exidx) }
+  .eh_frame_hdr : { *(.eh_frame_hdr)  }
+  .eh_frame     0 : ONLY_IF_RO { KEEP (*(.eh_frame))  }
+  .gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab 0 : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  /* Exception handling  */
+  .eh_frame     0 : ONLY_IF_RW { KEEP (*(.eh_frame))  }
+  .gnu_extab    0 : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	0 : { *(.tdata) }
+  .tbss		0 : { *(.tbss) }
+  .preinit_array   0 :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .jcr          0 : { KEEP (*(.jcr)) }
+  .dynamic      0 : { *(.dynamic) }
+  .got          0 : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data         0 :
+  {
+    *(.data)
+  }
+  .data1        0 : { *(.data1) }
+  .bss          0 :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+  }
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xs b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xs
new file mode 100644
index 0000000..0c0c84b
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xs
@@ -0,0 +1,231 @@
+/* Script for ld --shared: link shared library */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.init       : { *(.rel.init) }
+  .rela.init      : { *(.rela.init) }
+  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+  .rel.fini       : { *(.rel.fini) }
+  .rela.fini      : { *(.rela.fini) }
+  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+  .rel.data.rel.ro   : { *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) }
+  .rela.data.rel.ro   : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
+  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+  .rel.ctors      : { *(.rel.ctors) }
+  .rela.ctors     : { *(.rela.ctors) }
+  .rel.dtors      : { *(.rel.dtors) }
+  .rela.dtors     : { *(.rela.dtors) }
+  .rel.got        : { *(.rel.got) }
+  .rela.got       : { *(.rela.got) }
+  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+  .rel.iplt       :
+    {
+      *(.rel.iplt)
+    }
+  .rela.iplt      :
+    {
+      *(.rela.iplt)
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .init_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+  }
+  .fini_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xsc b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xsc
new file mode 100644
index 0000000..ae5d7ef
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xsc
@@ -0,0 +1,230 @@
+/* Script for --shared -z combreloc: shared library, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      *(.rel.iplt)
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      *(.rela.iplt)
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .init_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+  }
+  .fini_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xsw b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xsw
new file mode 100644
index 0000000..fa447dc
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xsw
@@ -0,0 +1,230 @@
+/* Script for --shared -z combreloc -z now -z relro: shared library, combine & sort relocs */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      *(.rel.iplt)
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      *(.rela.iplt)
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .init_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+  }
+  .fini_array     :
+  {
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xu b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xu
new file mode 100644
index 0000000..ee30894
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xu
@@ -0,0 +1,168 @@
+/* Script for ld -Ur: link w/out relocation, do create constructors */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .interp       0 : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash         0 : { *(.hash) }
+  .gnu.hash     0 : { *(.gnu.hash) }
+  .dynsym       0 : { *(.dynsym) }
+  .dynstr       0 : { *(.dynstr) }
+  .gnu.version  0 : { *(.gnu.version) }
+  .gnu.version_d 0: { *(.gnu.version_d) }
+  .gnu.version_r 0: { *(.gnu.version_r) }
+  .rel.init     0 : { *(.rel.init) }
+  .rela.init    0 : { *(.rela.init) }
+  .rel.text     0 : { *(.rel.text) }
+  .rela.text    0 : { *(.rela.text) }
+  .rel.fini     0 : { *(.rel.fini) }
+  .rela.fini    0 : { *(.rela.fini) }
+  .rel.rodata   0 : { *(.rel.rodata) }
+  .rela.rodata  0 : { *(.rela.rodata) }
+  .rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
+  .rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
+  .rel.data     0 : { *(.rel.data) }
+  .rela.data    0 : { *(.rela.data) }
+  .rel.tdata	0 : { *(.rel.tdata) }
+  .rela.tdata	0 : { *(.rela.tdata) }
+  .rel.tbss	0 : { *(.rel.tbss) }
+  .rela.tbss	0 : { *(.rela.tbss) }
+  .rel.ctors    0 : { *(.rel.ctors) }
+  .rela.ctors   0 : { *(.rela.ctors) }
+  .rel.dtors    0 : { *(.rel.dtors) }
+  .rela.dtors   0 : { *(.rela.dtors) }
+  .rel.got      0 : { *(.rel.got) }
+  .rela.got     0 : { *(.rela.got) }
+  .rel.bss      0 : { *(.rel.bss) }
+  .rela.bss     0 : { *(.rela.bss) }
+  .rel.iplt     0 :
+    {
+      *(.rel.iplt)
+    }
+  .rela.iplt    0 :
+    {
+      *(.rela.iplt)
+    }
+  .rel.plt      0 :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt     0 :
+    {
+      *(.rela.plt)
+    }
+  .init         0 :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt          0 : { *(.plt) }
+  .iplt         0 : { *(.iplt) }
+  .text         0 :
+  {
+    *(.text .stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+  }
+  .fini         0 :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  .rodata       0 : { *(.rodata) }
+  .rodata1      0 : { *(.rodata1) }
+  .ARM.extab 0 : { *(.ARM.extab) }
+  .ARM.exidx 0 : { *(.ARM.exidx) }
+  .eh_frame_hdr : { *(.eh_frame_hdr)  }
+  .eh_frame     0 : ONLY_IF_RO { KEEP (*(.eh_frame))  }
+  .gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab 0 : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  /* Exception handling  */
+  .eh_frame     0 : ONLY_IF_RW { KEEP (*(.eh_frame))  }
+  .gnu_extab    0 : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	0 : { *(.tdata) }
+  .tbss		0 : { *(.tbss) }
+  .preinit_array   0 :
+  {
+    KEEP (*(.preinit_array))
+  }
+  .jcr          0 : { KEEP (*(.jcr)) }
+  .dynamic      0 : { *(.dynamic) }
+  .got          0 : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  .data         0 :
+  {
+    *(.data)
+    SORT(CONSTRUCTORS)
+  }
+  .data1        0 : { *(.data1) }
+  .bss          0 :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+  }
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xw b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xw
new file mode 100644
index 0000000..dbc34d9
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/ldscripts/armelfb_linux_eabi.xw
@@ -0,0 +1,241 @@
+/* Script for -z combreloc -z now -z relro: combine and sort reloc sections */
+/* Copyright (C) 2014-2016 Free Software Foundation, Inc.
+   Copying and distribution of this script, with or without modification,
+   are permitted in any medium without royalty provided the copyright
+   notice and this notice are preserved.  */
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm",
+	      "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SEARCH_DIR("=/Volumes/Android/buildbot/src/android/binutils/out/binutils/darwin/arm/install/binutils-arm-darwin/arm-linux-androideabi/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
+  .interp         : { *(.interp) }
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+  .hash           : { *(.hash) }
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+  .rel.dyn        :
+    {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rel_iplt_start = .);
+      *(.rel.iplt)
+      PROVIDE_HIDDEN (__rel_iplt_end = .);
+    }
+  .rela.dyn       :
+    {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+      PROVIDE_HIDDEN (__rela_iplt_start = .);
+      *(.rela.iplt)
+      PROVIDE_HIDDEN (__rela_iplt_end = .);
+    }
+  .rel.plt        :
+    {
+      *(.rel.plt)
+    }
+  .rela.plt       :
+    {
+      *(.rela.plt)
+    }
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  }
+  .plt            : { *(.plt) }
+  .iplt           : { *(.iplt) }
+  .text           :
+  {
+    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
+    *(.text.exit .text.exit.*)
+    *(.text.startup .text.startup.*)
+    *(.text.hot .text.hot.*)
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+  }
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1        : { *(.rodata1) }
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+   PROVIDE_HIDDEN (__exidx_start = .);
+  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+   PROVIDE_HIDDEN (__exidx_end = .);
+  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
+  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
+  .gcc_except_table.*) }
+  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
+  /* These sections are generated by the Sun/Oracle C++ compiler.  */
+  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
+  .exception_ranges*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
+  /* Exception handling  */
+  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
+  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
+  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
+  /* Thread Local Storage sections  */
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  }
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  }
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  }
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  }
+  .jcr            : { KEEP (*(.jcr)) }
+  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
+  .dynamic        : { *(.dynamic) }
+  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
+  . = DATA_SEGMENT_RELRO_END (0, .);
+  .data           :
+  {
+    PROVIDE (__data_start = .);
+    *(.data .data.* .gnu.linkonce.d.*)
+    SORT(CONSTRUCTORS)
+  }
+  .data1          : { *(.data1) }
+  _edata = .; PROVIDE (edata = .);
+  __bss_start = .;
+  __bss_start__ = .;
+  .bss            :
+  {
+   *(.dynbss)
+   *(.bss .bss.* .gnu.linkonce.b.*)
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   . = ALIGN(. != 0 ? 32 / 8 : 1);
+  }
+  _bss_end__ = . ; __bss_end__ = . ;
+  . = ALIGN(32 / 8);
+  . = SEGMENT_START("ldata-segment", .);
+  . = ALIGN(32 / 8);
+  __end__ = . ;
+  _end = .; PROVIDE (end = .);
+  . = DATA_SEGMENT_END (.);
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment       0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+  /* DWARF Extension.  */
+  .debug_macro    0 : { *(.debug_macro) }
+  .debug_addr     0 : { *(.debug_addr) }
+  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
+}
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/libatomic.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/libatomic.a
new file mode 100644
index 0000000..5f5beac
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/libatomic.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/thumb/libatomic.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/thumb/libatomic.a
new file mode 100644
index 0000000..075d11b
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/arm-linux-androideabi/lib/thumb/libatomic.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-addr2line b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-addr2line
new file mode 100755
index 0000000..e323696
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-addr2line
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ar b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ar
new file mode 100755
index 0000000..86dfab6
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ar
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-as b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-as
new file mode 100755
index 0000000..4680034
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-as
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-c++filt b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-c++filt
new file mode 100755
index 0000000..92a2571
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-c++filt
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-dwp b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-dwp
new file mode 100755
index 0000000..fcc604a
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-dwp
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-elfedit b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-elfedit
new file mode 100755
index 0000000..aee8828
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-elfedit
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-gprof b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-gprof
new file mode 100755
index 0000000..73e329e
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-gprof
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld
new file mode 100755
index 0000000..2f501eb
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld.bfd b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld.bfd
new file mode 100755
index 0000000..0bed003
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld.bfd
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld.gold b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld.gold
new file mode 100755
index 0000000..2f501eb
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ld.gold
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-nm b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-nm
new file mode 100755
index 0000000..ed37553
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-nm
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-objcopy b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-objcopy
new file mode 100755
index 0000000..84fc19d
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-objcopy
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-objdump b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-objdump
new file mode 100755
index 0000000..52272a8
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-objdump
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ranlib b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ranlib
new file mode 100755
index 0000000..619c20b
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-ranlib
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-readelf b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-readelf
new file mode 100755
index 0000000..c1e7041
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-readelf
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-size b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-size
new file mode 100755
index 0000000..60c4f90
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-size
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-strings b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-strings
new file mode 100755
index 0000000..a2f81db
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-strings
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-strip b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-strip
new file mode 100755
index 0000000..496aff4
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-strip
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/bfd-plugins/LLVMgold.dylib b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/bfd-plugins/LLVMgold.dylib
new file mode 100755
index 0000000..8fdf853
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/bfd-plugins/LLVMgold.dylib
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/crtbegin.o b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/crtbegin.o
new file mode 100644
index 0000000..ceff12f
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/crtbegin.o
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/libgcc.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/libgcc.a
new file mode 100644
index 0000000..7d5dfb2
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/libgcc.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/thumb/crtbegin.o b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/thumb/crtbegin.o
new file mode 100644
index 0000000..932467a
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/thumb/crtbegin.o
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/thumb/libgcc.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/thumb/libgcc.a
new file mode 100644
index 0000000..4ed9b51
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a/thumb/libgcc.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/crtbegin.o b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/crtbegin.o
new file mode 100644
index 0000000..a2ad162
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/crtbegin.o
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/libgcc.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/libgcc.a
new file mode 100644
index 0000000..bf2e604
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/libgcc.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/thumb/crtbegin.o b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/thumb/crtbegin.o
new file mode 100644
index 0000000..e65e5fd
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/thumb/crtbegin.o
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/thumb/libgcc.a b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/thumb/libgcc.a
new file mode 100644
index 0000000..fe68b8c
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/thumb/libgcc.a
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/lib64/libc++.1.dylib b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/lib64/libc++.1.dylib
new file mode 100755
index 0000000..aa75c9d
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/lib64/libc++.1.dylib
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/lib64/libc++abi.1.dylib b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/lib64/libc++abi.1.dylib
new file mode 100755
index 0000000..2157cff
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/lib64/libc++abi.1.dylib
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/as.info b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/as.info
new file mode 100644
index 0000000..8fb6195
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/as.info
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/bfd.info b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/bfd.info
new file mode 100644
index 0000000..49ca6e2
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/bfd.info
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/binutils.info b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/binutils.info
new file mode 100644
index 0000000..bc67adc
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/binutils.info
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/dir b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/dir
new file mode 100644
index 0000000..8169e74
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/dir
@@ -0,0 +1,42 @@
+This is the file .../info/dir, which contains the
+topmost node of the Info hierarchy, called (dir)Top.
+The first time you invoke Info you start off looking at this node.
+
+File: dir,	Node: Top	This is the top of the INFO tree
+
+  This (the Directory node) gives a menu of major topics.
+  Typing "q" exits, "?" lists all Info commands, "d" returns here,
+  "h" gives a primer for first-timers,
+  "mEmacs<Return>" visits the Emacs manual, etc.
+
+  In Emacs, you can click mouse button 2 on a menu item or cross reference
+  to select it.
+
+* Menu:
+
+Software development
+* As: (as).                     The GNU assembler.
+* Bfd: (bfd).                   The Binary File Descriptor library.
+* Binutils: (binutils).         The GNU binary utilities.
+* Gas: (as).                    The GNU assembler.
+* Ld: (ld).                       The GNU linker.
+* gprof: (gprof).                Profiling your program's execution
+
+Individual utilities
+* addr2line: (binutils)addr2line. Convert addresses to file and line.
+* ar: (binutils)ar.               Create, modify, and extract from archives.
+* c++filt: (binutils)c++filt.	  Filter to demangle encoded C++ symbols.
+* cxxfilt: (binutils)c++filt.     MS-DOS name for c++filt.
+* dlltool: (binutils)dlltool.	  Create files needed to build and use DLLs.
+* elfedit: (binutils)elfedit.     Update the ELF header of ELF files.
+* nlmconv: (binutils)nlmconv.     Converts object code into an NLM.
+* nm: (binutils)nm.               List symbols from object files.
+* objcopy: (binutils)objcopy.	  Copy and translate object files.
+* objdump: (binutils)objdump.     Display information from object files.
+* ranlib: (binutils)ranlib.       Generate index to archive contents.
+* readelf: (binutils)readelf.	  Display the contents of ELF format files.
+* size: (binutils)size.           List section sizes and total size.
+* strings: (binutils)strings.     List printable strings from files.
+* strip: (binutils)strip.         Discard symbols.
+* windmc: (binutils)windmc.	  Generator for Windows message resources.
+* windres: (binutils)windres.	  Manipulate Windows resources.
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/gprof.info b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/gprof.info
new file mode 100644
index 0000000..8ce3e23
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/gprof.info
@@ -0,0 +1,2479 @@
+This is gprof.info, produced by makeinfo version 4.8 from
+/Volumes/Android/buildbot/src/android/binutils/toolchain/binutils/binutils-2.27/gprof/gprof.texi.
+
+INFO-DIR-SECTION Software development
+START-INFO-DIR-ENTRY
+* gprof: (gprof).                Profiling your program's execution
+END-INFO-DIR-ENTRY
+
+   This file documents the gprof profiler of the GNU system.
+
+   Copyright (C) 1988-2016 Free Software Foundation, Inc.
+
+   Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts.  A copy of the license is included in the section entitled "GNU
+Free Documentation License".
+
+
+File: gprof.info,  Node: Top,  Next: Introduction,  Up: (dir)
+
+Profiling a Program: Where Does It Spend Its Time?
+**************************************************
+
+This manual describes the GNU profiler, `gprof', and how you can use it
+to determine which parts of a program are taking most of the execution
+time.  We assume that you know how to write, compile, and execute
+programs.  GNU `gprof' was written by Jay Fenlason.
+
+   This manual is for `gprof' (GNU Binutils) version 2.27.0.
+
+   This document is distributed under the terms of the GNU Free
+Documentation License version 1.3.  A copy of the license is included
+in the section entitled "GNU Free Documentation License".
+
+* Menu:
+
+* Introduction::        What profiling means, and why it is useful.
+
+* Compiling::           How to compile your program for profiling.
+* Executing::           Executing your program to generate profile data
+* Invoking::            How to run `gprof', and its options
+
+* Output::              Interpreting `gprof''s output
+
+* Inaccuracy::          Potential problems you should be aware of
+* How do I?::           Answers to common questions
+* Incompatibilities::   (between GNU `gprof' and Unix `gprof'.)
+* Details::             Details of how profiling is done
+* GNU Free Documentation License::  GNU Free Documentation License
+
+
+File: gprof.info,  Node: Introduction,  Next: Compiling,  Prev: Top,  Up: Top
+
+1 Introduction to Profiling
+***************************
+
+Profiling allows you to learn where your program spent its time and
+which functions called which other functions while it was executing.
+This information can show you which pieces of your program are slower
+than you expected, and might be candidates for rewriting to make your
+program execute faster.  It can also tell you which functions are being
+called more or less often than you expected.  This may help you spot
+bugs that had otherwise been unnoticed.
+
+   Since the profiler uses information collected during the actual
+execution of your program, it can be used on programs that are too
+large or too complex to analyze by reading the source.  However, how
+your program is run will affect the information that shows up in the
+profile data.  If you don't use some feature of your program while it
+is being profiled, no profile information will be generated for that
+feature.
+
+   Profiling has several steps:
+
+   * You must compile and link your program with profiling enabled.
+     *Note Compiling a Program for Profiling: Compiling.
+
+   * You must execute your program to generate a profile data file.
+     *Note Executing the Program: Executing.
+
+   * You must run `gprof' to analyze the profile data.  *Note `gprof'
+     Command Summary: Invoking.
+
+   The next three chapters explain these steps in greater detail.
+
+   Several forms of output are available from the analysis.
+
+   The "flat profile" shows how much time your program spent in each
+function, and how many times that function was called.  If you simply
+want to know which functions burn most of the cycles, it is stated
+concisely here.  *Note The Flat Profile: Flat Profile.
+
+   The "call graph" shows, for each function, which functions called
+it, which other functions it called, and how many times.  There is also
+an estimate of how much time was spent in the subroutines of each
+function.  This can suggest places where you might try to eliminate
+function calls that use a lot of time.  *Note The Call Graph: Call
+Graph.
+
+   The "annotated source" listing is a copy of the program's source
+code, labeled with the number of times each line of the program was
+executed.  *Note The Annotated Source Listing: Annotated Source.
+
+   To better understand how profiling works, you may wish to read a
+description of its implementation.  *Note Implementation of Profiling:
+Implementation.
+
+
+File: gprof.info,  Node: Compiling,  Next: Executing,  Prev: Introduction,  Up: Top
+
+2 Compiling a Program for Profiling
+***********************************
+
+The first step in generating profile information for your program is to
+compile and link it with profiling enabled.
+
+   To compile a source file for profiling, specify the `-pg' option when
+you run the compiler.  (This is in addition to the options you normally
+use.)
+
+   To link the program for profiling, if you use a compiler such as `cc'
+to do the linking, simply specify `-pg' in addition to your usual
+options.  The same option, `-pg', alters either compilation or linking
+to do what is necessary for profiling.  Here are examples:
+
+     cc -g -c myprog.c utils.c -pg
+     cc -o myprog myprog.o utils.o -pg
+
+   The `-pg' option also works with a command that both compiles and
+links:
+
+     cc -o myprog myprog.c utils.c -g -pg
+
+   Note: The `-pg' option must be part of your compilation options as
+well as your link options.  If it is not then no call-graph data will
+be gathered and when you run `gprof' you will get an error message like
+this:
+
+     gprof: gmon.out file is missing call-graph data
+
+   If you add the `-Q' switch to suppress the printing of the call
+graph data you will still be able to see the time samples:
+
+     Flat profile:
+
+     Each sample counts as 0.01 seconds.
+       %   cumulative   self              self     total
+      time   seconds   seconds    calls  Ts/call  Ts/call  name
+      44.12      0.07     0.07                             zazLoop
+      35.29      0.14     0.06                             main
+      20.59      0.17     0.04                             bazMillion
+
+   If you run the linker `ld' directly instead of through a compiler
+such as `cc', you may have to specify a profiling startup file
+`gcrt0.o' as the first input file instead of the usual startup file
+`crt0.o'.  In addition, you would probably want to specify the
+profiling C library, `libc_p.a', by writing `-lc_p' instead of the
+usual `-lc'.  This is not absolutely necessary, but doing this gives
+you number-of-calls information for standard library functions such as
+`read' and `open'.  For example:
+
+     ld -o myprog /lib/gcrt0.o myprog.o utils.o -lc_p
+
+   If you are running the program on a system which supports shared
+libraries you may run into problems with the profiling support code in
+a shared library being called before that library has been fully
+initialised.  This is usually detected by the program encountering a
+segmentation fault as soon as it is run.  The solution is to link
+against a static version of the library containing the profiling
+support code, which for `gcc' users can be done via the `-static' or
+`-static-libgcc' command line option.  For example:
+
+     gcc -g -pg -static-libgcc myprog.c utils.c -o myprog
+
+   If you compile only some of the modules of the program with `-pg',
+you can still profile the program, but you won't get complete
+information about the modules that were compiled without `-pg'.  The
+only information you get for the functions in those modules is the
+total time spent in them; there is no record of how many times they
+were called, or from where.  This will not affect the flat profile
+(except that the `calls' field for the functions will be blank), but
+will greatly reduce the usefulness of the call graph.
+
+   If you wish to perform line-by-line profiling you should use the
+`gcov' tool instead of `gprof'.  See that tool's manual or info pages
+for more details of how to do this.
+
+   Note, older versions of `gcc' produce line-by-line profiling
+information that works with `gprof' rather than `gcov' so there is
+still support for displaying this kind of information in `gprof'. *Note
+Line-by-line Profiling: Line-by-line.
+
+   It also worth noting that `gcc' implements a
+`-finstrument-functions' command line option which will insert calls to
+special user supplied instrumentation routines at the entry and exit of
+every function in their program.  This can be used to implement an
+alternative profiling scheme.
+
+
+File: gprof.info,  Node: Executing,  Next: Invoking,  Prev: Compiling,  Up: Top
+
+3 Executing the Program
+***********************
+
+Once the program is compiled for profiling, you must run it in order to
+generate the information that `gprof' needs.  Simply run the program as
+usual, using the normal arguments, file names, etc.  The program should
+run normally, producing the same output as usual.  It will, however, run
+somewhat slower than normal because of the time spent collecting and
+writing the profile data.
+
+   The way you run the program--the arguments and input that you give
+it--may have a dramatic effect on what the profile information shows.
+The profile data will describe the parts of the program that were
+activated for the particular input you use.  For example, if the first
+command you give to your program is to quit, the profile data will show
+the time used in initialization and in cleanup, but not much else.
+
+   Your program will write the profile data into a file called
+`gmon.out' just before exiting.  If there is already a file called
+`gmon.out', its contents are overwritten.  There is currently no way to
+tell the program to write the profile data under a different name, but
+you can rename the file afterwards if you are concerned that it may be
+overwritten.
+
+   In order to write the `gmon.out' file properly, your program must
+exit normally: by returning from `main' or by calling `exit'.  Calling
+the low-level function `_exit' does not write the profile data, and
+neither does abnormal termination due to an unhandled signal.
+
+   The `gmon.out' file is written in the program's _current working
+directory_ at the time it exits.  This means that if your program calls
+`chdir', the `gmon.out' file will be left in the last directory your
+program `chdir''d to.  If you don't have permission to write in this
+directory, the file is not written, and you will get an error message.
+
+   Older versions of the GNU profiling library may also write a file
+called `bb.out'.  This file, if present, contains an human-readable
+listing of the basic-block execution counts.  Unfortunately, the
+appearance of a human-readable `bb.out' means the basic-block counts
+didn't get written into `gmon.out'.  The Perl script `bbconv.pl',
+included with the `gprof' source distribution, will convert a `bb.out'
+file into a format readable by `gprof'.  Invoke it like this:
+
+     bbconv.pl < bb.out > BH-DATA
+
+   This translates the information in `bb.out' into a form that `gprof'
+can understand.  But you still need to tell `gprof' about the existence
+of this translated information.  To do that, include BB-DATA on the
+`gprof' command line, _along with `gmon.out'_, like this:
+
+     gprof OPTIONS EXECUTABLE-FILE gmon.out BB-DATA [YET-MORE-PROFILE-DATA-FILES...] [> OUTFILE]
+
+
+File: gprof.info,  Node: Invoking,  Next: Output,  Prev: Executing,  Up: Top
+
+4 `gprof' Command Summary
+*************************
+
+After you have a profile data file `gmon.out', you can run `gprof' to
+interpret the information in it.  The `gprof' program prints a flat
+profile and a call graph on standard output.  Typically you would
+redirect the output of `gprof' into a file with `>'.
+
+   You run `gprof' like this:
+
+     gprof OPTIONS [EXECUTABLE-FILE [PROFILE-DATA-FILES...]] [> OUTFILE]
+
+Here square-brackets indicate optional arguments.
+
+   If you omit the executable file name, the file `a.out' is used.  If
+you give no profile data file name, the file `gmon.out' is used.  If
+any file is not in the proper format, or if the profile data file does
+not appear to belong to the executable file, an error message is
+printed.
+
+   You can give more than one profile data file by entering all their
+names after the executable file name; then the statistics in all the
+data files are summed together.
+
+   The order of these options does not matter.
+
+* Menu:
+
+* Output Options::      Controlling `gprof''s output style
+* Analysis Options::    Controlling how `gprof' analyzes its data
+* Miscellaneous Options::
+* Deprecated Options::  Options you no longer need to use, but which
+                            have been retained for compatibility
+* Symspecs::            Specifying functions to include or exclude
+
+
+File: gprof.info,  Node: Output Options,  Next: Analysis Options,  Up: Invoking
+
+4.1 Output Options
+==================
+
+These options specify which of several output formats `gprof' should
+produce.
+
+   Many of these options take an optional "symspec" to specify
+functions to be included or excluded.  These options can be specified
+multiple times, with different symspecs, to include or exclude sets of
+symbols.  *Note Symspecs: Symspecs.
+
+   Specifying any of these options overrides the default (`-p -q'),
+which prints a flat profile and call graph analysis for all functions.
+
+`-A[SYMSPEC]'
+`--annotated-source[=SYMSPEC]'
+     The `-A' option causes `gprof' to print annotated source code.  If
+     SYMSPEC is specified, print output only for matching symbols.
+     *Note The Annotated Source Listing: Annotated Source.
+
+`-b'
+`--brief'
+     If the `-b' option is given, `gprof' doesn't print the verbose
+     blurbs that try to explain the meaning of all of the fields in the
+     tables.  This is useful if you intend to print out the output, or
+     are tired of seeing the blurbs.
+
+`-C[SYMSPEC]'
+`--exec-counts[=SYMSPEC]'
+     The `-C' option causes `gprof' to print a tally of functions and
+     the number of times each was called.  If SYMSPEC is specified,
+     print tally only for matching symbols.
+
+     If the profile data file contains basic-block count records,
+     specifying the `-l' option, along with `-C', will cause basic-block
+     execution counts to be tallied and displayed.
+
+`-i'
+`--file-info'
+     The `-i' option causes `gprof' to display summary information
+     about the profile data file(s) and then exit.  The number of
+     histogram, call graph, and basic-block count records is displayed.
+
+`-I DIRS'
+`--directory-path=DIRS'
+     The `-I' option specifies a list of search directories in which to
+     find source files.  Environment variable GPROF_PATH can also be
+     used to convey this information.  Used mostly for annotated source
+     output.
+
+`-J[SYMSPEC]'
+`--no-annotated-source[=SYMSPEC]'
+     The `-J' option causes `gprof' not to print annotated source code.
+     If SYMSPEC is specified, `gprof' prints annotated source, but
+     excludes matching symbols.
+
+`-L'
+`--print-path'
+     Normally, source filenames are printed with the path component
+     suppressed.  The `-L' option causes `gprof' to print the full
+     pathname of source filenames, which is determined from symbolic
+     debugging information in the image file and is relative to the
+     directory in which the compiler was invoked.
+
+`-p[SYMSPEC]'
+`--flat-profile[=SYMSPEC]'
+     The `-p' option causes `gprof' to print a flat profile.  If
+     SYMSPEC is specified, print flat profile only for matching symbols.
+     *Note The Flat Profile: Flat Profile.
+
+`-P[SYMSPEC]'
+`--no-flat-profile[=SYMSPEC]'
+     The `-P' option causes `gprof' to suppress printing a flat profile.
+     If SYMSPEC is specified, `gprof' prints a flat profile, but
+     excludes matching symbols.
+
+`-q[SYMSPEC]'
+`--graph[=SYMSPEC]'
+     The `-q' option causes `gprof' to print the call graph analysis.
+     If SYMSPEC is specified, print call graph only for matching symbols
+     and their children.  *Note The Call Graph: Call Graph.
+
+`-Q[SYMSPEC]'
+`--no-graph[=SYMSPEC]'
+     The `-Q' option causes `gprof' to suppress printing the call graph.
+     If SYMSPEC is specified, `gprof' prints a call graph, but excludes
+     matching symbols.
+
+`-t'
+`--table-length=NUM'
+     The `-t' option causes the NUM most active source lines in each
+     source file to be listed when source annotation is enabled.  The
+     default is 10.
+
+`-y'
+`--separate-files'
+     This option affects annotated source output only.  Normally,
+     `gprof' prints annotated source files to standard-output.  If this
+     option is specified, annotated source for a file named
+     `path/FILENAME' is generated in the file `FILENAME-ann'.  If the
+     underlying file system would truncate `FILENAME-ann' so that it
+     overwrites the original `FILENAME', `gprof' generates annotated
+     source in the file `FILENAME.ann' instead (if the original file
+     name has an extension, that extension is _replaced_ with `.ann').
+
+`-Z[SYMSPEC]'
+`--no-exec-counts[=SYMSPEC]'
+     The `-Z' option causes `gprof' not to print a tally of functions
+     and the number of times each was called.  If SYMSPEC is specified,
+     print tally, but exclude matching symbols.
+
+`-r'
+`--function-ordering'
+     The `--function-ordering' option causes `gprof' to print a
+     suggested function ordering for the program based on profiling
+     data.  This option suggests an ordering which may improve paging,
+     tlb and cache behavior for the program on systems which support
+     arbitrary ordering of functions in an executable.
+
+     The exact details of how to force the linker to place functions in
+     a particular order is system dependent and out of the scope of this
+     manual.
+
+`-R MAP_FILE'
+`--file-ordering MAP_FILE'
+     The `--file-ordering' option causes `gprof' to print a suggested
+     .o link line ordering for the program based on profiling data.
+     This option suggests an ordering which may improve paging, tlb and
+     cache behavior for the program on systems which do not support
+     arbitrary ordering of functions in an executable.
+
+     Use of the `-a' argument is highly recommended with this option.
+
+     The MAP_FILE argument is a pathname to a file which provides
+     function name to object file mappings.  The format of the file is
+     similar to the output of the program `nm'.
+
+          c-parse.o:00000000 T yyparse
+          c-parse.o:00000004 C yyerrflag
+          c-lang.o:00000000 T maybe_objc_method_name
+          c-lang.o:00000000 T print_lang_statistics
+          c-lang.o:00000000 T recognize_objc_keyword
+          c-decl.o:00000000 T print_lang_identifier
+          c-decl.o:00000000 T print_lang_type
+          ...
+
+     To create a MAP_FILE with GNU `nm', type a command like `nm
+     --extern-only --defined-only -v --print-file-name program-name'.
+
+`-T'
+`--traditional'
+     The `-T' option causes `gprof' to print its output in
+     "traditional" BSD style.
+
+`-w WIDTH'
+`--width=WIDTH'
+     Sets width of output lines to WIDTH.  Currently only used when
+     printing the function index at the bottom of the call graph.
+
+`-x'
+`--all-lines'
+     This option affects annotated source output only.  By default,
+     only the lines at the beginning of a basic-block are annotated.
+     If this option is specified, every line in a basic-block is
+     annotated by repeating the annotation for the first line.  This
+     behavior is similar to `tcov''s `-a'.
+
+`--demangle[=STYLE]'
+`--no-demangle'
+     These options control whether C++ symbol names should be demangled
+     when printing output.  The default is to demangle symbols.  The
+     `--no-demangle' option may be used to turn off demangling.
+     Different compilers have different mangling styles.  The optional
+     demangling style argument can be used to choose an appropriate
+     demangling style for your compiler.
+
+
+File: gprof.info,  Node: Analysis Options,  Next: Miscellaneous Options,  Prev: Output Options,  Up: Invoking
+
+4.2 Analysis Options
+====================
+
+`-a'
+`--no-static'
+     The `-a' option causes `gprof' to suppress the printing of
+     statically declared (private) functions.  (These are functions
+     whose names are not listed as global, and which are not visible
+     outside the file/function/block where they were defined.)  Time
+     spent in these functions, calls to/from them, etc., will all be
+     attributed to the function that was loaded directly before it in
+     the executable file.  This option affects both the flat profile
+     and the call graph.
+
+`-c'
+`--static-call-graph'
+     The `-c' option causes the call graph of the program to be
+     augmented by a heuristic which examines the text space of the
+     object file and identifies function calls in the binary machine
+     code.  Since normal call graph records are only generated when
+     functions are entered, this option identifies children that could
+     have been called, but never were.  Calls to functions that were
+     not compiled with profiling enabled are also identified, but only
+     if symbol table entries are present for them.  Calls to dynamic
+     library routines are typically _not_ found by this option.
+     Parents or children identified via this heuristic are indicated in
+     the call graph with call counts of `0'.
+
+`-D'
+`--ignore-non-functions'
+     The `-D' option causes `gprof' to ignore symbols which are not
+     known to be functions.  This option will give more accurate
+     profile data on systems where it is supported (Solaris and HPUX for
+     example).
+
+`-k FROM/TO'
+     The `-k' option allows you to delete from the call graph any arcs
+     from symbols matching symspec FROM to those matching symspec TO.
+
+`-l'
+`--line'
+     The `-l' option enables line-by-line profiling, which causes
+     histogram hits to be charged to individual source code lines,
+     instead of functions.  This feature only works with programs
+     compiled by older versions of the `gcc' compiler.  Newer versions
+     of `gcc' are designed to work with the `gcov' tool instead.
+
+     If the program was compiled with basic-block counting enabled,
+     this option will also identify how many times each line of code
+     was executed.  While line-by-line profiling can help isolate where
+     in a large function a program is spending its time, it also
+     significantly increases the running time of `gprof', and magnifies
+     statistical inaccuracies.  *Note Statistical Sampling Error:
+     Sampling Error.
+
+`--inline-file-names'
+     This option causes `gprof' to print the source file after each
+     symbol in both the flat profile and the call graph. The full path
+     to the file is printed if used with the `-L' option.
+
+`-m NUM'
+`--min-count=NUM'
+     This option affects execution count output only.  Symbols that are
+     executed less than NUM times are suppressed.
+
+`-nSYMSPEC'
+`--time=SYMSPEC'
+     The `-n' option causes `gprof', in its call graph analysis, to
+     only propagate times for symbols matching SYMSPEC.
+
+`-NSYMSPEC'
+`--no-time=SYMSPEC'
+     The `-n' option causes `gprof', in its call graph analysis, not to
+     propagate times for symbols matching SYMSPEC.
+
+`-SFILENAME'
+`--external-symbol-table=FILENAME'
+     The `-S' option causes `gprof' to read an external symbol table
+     file, such as `/proc/kallsyms', rather than read the symbol table
+     from the given object file (the default is `a.out'). This is useful
+     for profiling kernel modules.
+
+`-z'
+`--display-unused-functions'
+     If you give the `-z' option, `gprof' will mention all functions in
+     the flat profile, even those that were never called, and that had
+     no time spent in them.  This is useful in conjunction with the
+     `-c' option for discovering which routines were never called.
+
+
+
+File: gprof.info,  Node: Miscellaneous Options,  Next: Deprecated Options,  Prev: Analysis Options,  Up: Invoking
+
+4.3 Miscellaneous Options
+=========================
+
+`-d[NUM]'
+`--debug[=NUM]'
+     The `-d NUM' option specifies debugging options.  If NUM is not
+     specified, enable all debugging.  *Note Debugging `gprof':
+     Debugging.
+
+`-h'
+`--help'
+     The `-h' option prints command line usage.
+
+`-ONAME'
+`--file-format=NAME'
+     Selects the format of the profile data files.  Recognized formats
+     are `auto' (the default), `bsd', `4.4bsd', `magic', and `prof'
+     (not yet supported).
+
+`-s'
+`--sum'
+     The `-s' option causes `gprof' to summarize the information in the
+     profile data files it read in, and write out a profile data file
+     called `gmon.sum', which contains all the information from the
+     profile data files that `gprof' read in.  The file `gmon.sum' may
+     be one of the specified input files; the effect of this is to
+     merge the data in the other input files into `gmon.sum'.
+
+     Eventually you can run `gprof' again without `-s' to analyze the
+     cumulative data in the file `gmon.sum'.
+
+`-v'
+`--version'
+     The `-v' flag causes `gprof' to print the current version number,
+     and then exit.
+
+
+
+File: gprof.info,  Node: Deprecated Options,  Next: Symspecs,  Prev: Miscellaneous Options,  Up: Invoking
+
+4.4 Deprecated Options
+======================
+
+These options have been replaced with newer versions that use symspecs.
+
+`-e FUNCTION_NAME'
+     The `-e FUNCTION' option tells `gprof' to not print information
+     about the function FUNCTION_NAME (and its children...) in the call
+     graph.  The function will still be listed as a child of any
+     functions that call it, but its index number will be shown as
+     `[not printed]'.  More than one `-e' option may be given; only one
+     FUNCTION_NAME may be indicated with each `-e' option.
+
+`-E FUNCTION_NAME'
+     The `-E FUNCTION' option works like the `-e' option, but time
+     spent in the function (and children who were not called from
+     anywhere else), will not be used to compute the
+     percentages-of-time for the call graph.  More than one `-E' option
+     may be given; only one FUNCTION_NAME may be indicated with each
+     `-E' option.
+
+`-f FUNCTION_NAME'
+     The `-f FUNCTION' option causes `gprof' to limit the call graph to
+     the function FUNCTION_NAME and its children (and their
+     children...).  More than one `-f' option may be given; only one
+     FUNCTION_NAME may be indicated with each `-f' option.
+
+`-F FUNCTION_NAME'
+     The `-F FUNCTION' option works like the `-f' option, but only time
+     spent in the function and its children (and their children...)
+     will be used to determine total-time and percentages-of-time for
+     the call graph.  More than one `-F' option may be given; only one
+     FUNCTION_NAME may be indicated with each `-F' option.  The `-F'
+     option overrides the `-E' option.
+
+
+   Note that only one function can be specified with each `-e', `-E',
+`-f' or `-F' option.  To specify more than one function, use multiple
+options.  For example, this command:
+
+     gprof -e boring -f foo -f bar myprogram > gprof.output
+
+lists in the call graph all functions that were reached from either
+`foo' or `bar' and were not reachable from `boring'.
+
+
+File: gprof.info,  Node: Symspecs,  Prev: Deprecated Options,  Up: Invoking
+
+4.5 Symspecs
+============
+
+Many of the output options allow functions to be included or excluded
+using "symspecs" (symbol specifications), which observe the following
+syntax:
+
+       filename_containing_a_dot
+     | funcname_not_containing_a_dot
+     | linenumber
+     | ( [ any_filename ] `:' ( any_funcname | linenumber ) )
+
+   Here are some sample symspecs:
+
+`main.c'
+     Selects everything in file `main.c'--the dot in the string tells
+     `gprof' to interpret the string as a filename, rather than as a
+     function name.  To select a file whose name does not contain a
+     dot, a trailing colon should be specified.  For example, `odd:' is
+     interpreted as the file named `odd'.
+
+`main'
+     Selects all functions named `main'.
+
+     Note that there may be multiple instances of the same function name
+     because some of the definitions may be local (i.e., static).
+     Unless a function name is unique in a program, you must use the
+     colon notation explained below to specify a function from a
+     specific source file.
+
+     Sometimes, function names contain dots.  In such cases, it is
+     necessary to add a leading colon to the name.  For example,
+     `:.mul' selects function `.mul'.
+
+     In some object file formats, symbols have a leading underscore.
+     `gprof' will normally not print these underscores.  When you name a
+     symbol in a symspec, you should type it exactly as `gprof' prints
+     it in its output.  For example, if the compiler produces a symbol
+     `_main' from your `main' function, `gprof' still prints it as
+     `main' in its output, so you should use `main' in symspecs.
+
+`main.c:main'
+     Selects function `main' in file `main.c'.
+
+`main.c:134'
+     Selects line 134 in file `main.c'.
+
+
+File: gprof.info,  Node: Output,  Next: Inaccuracy,  Prev: Invoking,  Up: Top
+
+5 Interpreting `gprof''s Output
+*******************************
+
+`gprof' can produce several different output styles, the most important
+of which are described below.  The simplest output styles (file
+information, execution count, and function and file ordering) are not
+described here, but are documented with the respective options that
+trigger them.  *Note Output Options: Output Options.
+
+* Menu:
+
+* Flat Profile::        The flat profile shows how much time was spent
+                            executing directly in each function.
+* Call Graph::          The call graph shows which functions called which
+                            others, and how much time each function used
+                            when its subroutine calls are included.
+* Line-by-line::        `gprof' can analyze individual source code lines
+* Annotated Source::    The annotated source listing displays source code
+                            labeled with execution counts
+
+
+File: gprof.info,  Node: Flat Profile,  Next: Call Graph,  Up: Output
+
+5.1 The Flat Profile
+====================
+
+The "flat profile" shows the total amount of time your program spent
+executing each function.  Unless the `-z' option is given, functions
+with no apparent time spent in them, and no apparent calls to them, are
+not mentioned.  Note that if a function was not compiled for profiling,
+and didn't run long enough to show up on the program counter histogram,
+it will be indistinguishable from a function that was never called.
+
+   This is part of a flat profile for a small program:
+
+     Flat profile:
+
+     Each sample counts as 0.01 seconds.
+       %   cumulative   self              self     total
+      time   seconds   seconds    calls  ms/call  ms/call  name
+      33.34      0.02     0.02     7208     0.00     0.00  open
+      16.67      0.03     0.01      244     0.04     0.12  offtime
+      16.67      0.04     0.01        8     1.25     1.25  memccpy
+      16.67      0.05     0.01        7     1.43     1.43  write
+      16.67      0.06     0.01                             mcount
+       0.00      0.06     0.00      236     0.00     0.00  tzset
+       0.00      0.06     0.00      192     0.00     0.00  tolower
+       0.00      0.06     0.00       47     0.00     0.00  strlen
+       0.00      0.06     0.00       45     0.00     0.00  strchr
+       0.00      0.06     0.00        1     0.00    50.00  main
+       0.00      0.06     0.00        1     0.00     0.00  memcpy
+       0.00      0.06     0.00        1     0.00    10.11  print
+       0.00      0.06     0.00        1     0.00     0.00  profil
+       0.00      0.06     0.00        1     0.00    50.00  report
+     ...
+
+The functions are sorted first by decreasing run-time spent in them,
+then by decreasing number of calls, then alphabetically by name.  The
+functions `mcount' and `profil' are part of the profiling apparatus and
+appear in every flat profile; their time gives a measure of the amount
+of overhead due to profiling.
+
+   Just before the column headers, a statement appears indicating how
+much time each sample counted as.  This "sampling period" estimates the
+margin of error in each of the time figures.  A time figure that is not
+much larger than this is not reliable.  In this example, each sample
+counted as 0.01 seconds, suggesting a 100 Hz sampling rate.  The
+program's total execution time was 0.06 seconds, as indicated by the
+`cumulative seconds' field.  Since each sample counted for 0.01
+seconds, this means only six samples were taken during the run.  Two of
+the samples occurred while the program was in the `open' function, as
+indicated by the `self seconds' field.  Each of the other four samples
+occurred one each in `offtime', `memccpy', `write', and `mcount'.
+Since only six samples were taken, none of these values can be regarded
+as particularly reliable.  In another run, the `self seconds' field for
+`mcount' might well be `0.00' or `0.02'.  *Note Statistical Sampling
+Error: Sampling Error, for a complete discussion.
+
+   The remaining functions in the listing (those whose `self seconds'
+field is `0.00') didn't appear in the histogram samples at all.
+However, the call graph indicated that they were called, so therefore
+they are listed, sorted in decreasing order by the `calls' field.
+Clearly some time was spent executing these functions, but the paucity
+of histogram samples prevents any determination of how much time each
+took.
+
+   Here is what the fields in each line mean:
+
+`% time'
+     This is the percentage of the total execution time your program
+     spent in this function.  These should all add up to 100%.
+
+`cumulative seconds'
+     This is the cumulative total number of seconds the computer spent
+     executing this functions, plus the time spent in all the functions
+     above this one in this table.
+
+`self seconds'
+     This is the number of seconds accounted for by this function alone.
+     The flat profile listing is sorted first by this number.
+
+`calls'
+     This is the total number of times the function was called.  If the
+     function was never called, or the number of times it was called
+     cannot be determined (probably because the function was not
+     compiled with profiling enabled), the "calls" field is blank.
+
+`self ms/call'
+     This represents the average number of milliseconds spent in this
+     function per call, if this function is profiled.  Otherwise, this
+     field is blank for this function.
+
+`total ms/call'
+     This represents the average number of milliseconds spent in this
+     function and its descendants per call, if this function is
+     profiled.  Otherwise, this field is blank for this function.  This
+     is the only field in the flat profile that uses call graph
+     analysis.
+
+`name'
+     This is the name of the function.   The flat profile is sorted by
+     this field alphabetically after the "self seconds" and "calls"
+     fields are sorted.
+
+
+File: gprof.info,  Node: Call Graph,  Next: Line-by-line,  Prev: Flat Profile,  Up: Output
+
+5.2 The Call Graph
+==================
+
+The "call graph" shows how much time was spent in each function and its
+children.  From this information, you can find functions that, while
+they themselves may not have used much time, called other functions
+that did use unusual amounts of time.
+
+   Here is a sample call from a small program.  This call came from the
+same `gprof' run as the flat profile example in the previous section.
+
+     granularity: each sample hit covers 2 byte(s) for 20.00% of 0.05 seconds
+
+     index % time    self  children    called     name
+                                                      <spontaneous>
+     [1]    100.0    0.00    0.05                 start [1]
+                     0.00    0.05       1/1           main [2]
+                     0.00    0.00       1/2           on_exit [28]
+                     0.00    0.00       1/1           exit [59]
+     -----------------------------------------------
+                     0.00    0.05       1/1           start [1]
+     [2]    100.0    0.00    0.05       1         main [2]
+                     0.00    0.05       1/1           report [3]
+     -----------------------------------------------
+                     0.00    0.05       1/1           main [2]
+     [3]    100.0    0.00    0.05       1         report [3]
+                     0.00    0.03       8/8           timelocal [6]
+                     0.00    0.01       1/1           print [9]
+                     0.00    0.01       9/9           fgets [12]
+                     0.00    0.00      12/34          strncmp <cycle 1> [40]
+                     0.00    0.00       8/8           lookup [20]
+                     0.00    0.00       1/1           fopen [21]
+                     0.00    0.00       8/8           chewtime [24]
+                     0.00    0.00       8/16          skipspace [44]
+     -----------------------------------------------
+     [4]     59.8    0.01        0.02       8+472     <cycle 2 as a whole> [4]
+                     0.01        0.02     244+260         offtime <cycle 2> [7]
+                     0.00        0.00     236+1           tzset <cycle 2> [26]
+     -----------------------------------------------
+
+   The lines full of dashes divide this table into "entries", one for
+each function.  Each entry has one or more lines.
+
+   In each entry, the primary line is the one that starts with an index
+number in square brackets.  The end of this line says which function
+the entry is for.  The preceding lines in the entry describe the
+callers of this function and the following lines describe its
+subroutines (also called "children" when we speak of the call graph).
+
+   The entries are sorted by time spent in the function and its
+subroutines.
+
+   The internal profiling function `mcount' (*note The Flat Profile:
+Flat Profile.) is never mentioned in the call graph.
+
+* Menu:
+
+* Primary::       Details of the primary line's contents.
+* Callers::       Details of caller-lines' contents.
+* Subroutines::   Details of subroutine-lines' contents.
+* Cycles::        When there are cycles of recursion,
+                   such as `a' calls `b' calls `a'...
+
+
+File: gprof.info,  Node: Primary,  Next: Callers,  Up: Call Graph
+
+5.2.1 The Primary Line
+----------------------
+
+The "primary line" in a call graph entry is the line that describes the
+function which the entry is about and gives the overall statistics for
+this function.
+
+   For reference, we repeat the primary line from the entry for function
+`report' in our main example, together with the heading line that shows
+the names of the fields:
+
+     index  % time    self  children called     name
+     ...
+     [3]    100.0    0.00    0.05       1         report [3]
+
+   Here is what the fields in the primary line mean:
+
+`index'
+     Entries are numbered with consecutive integers.  Each function
+     therefore has an index number, which appears at the beginning of
+     its primary line.
+
+     Each cross-reference to a function, as a caller or subroutine of
+     another, gives its index number as well as its name.  The index
+     number guides you if you wish to look for the entry for that
+     function.
+
+`% time'
+     This is the percentage of the total time that was spent in this
+     function, including time spent in subroutines called from this
+     function.
+
+     The time spent in this function is counted again for the callers of
+     this function.  Therefore, adding up these percentages is
+     meaningless.
+
+`self'
+     This is the total amount of time spent in this function.  This
+     should be identical to the number printed in the `seconds' field
+     for this function in the flat profile.
+
+`children'
+     This is the total amount of time spent in the subroutine calls
+     made by this function.  This should be equal to the sum of all the
+     `self' and `children' entries of the children listed directly
+     below this function.
+
+`called'
+     This is the number of times the function was called.
+
+     If the function called itself recursively, there are two numbers,
+     separated by a `+'.  The first number counts non-recursive calls,
+     and the second counts recursive calls.
+
+     In the example above, the function `report' was called once from
+     `main'.
+
+`name'
+     This is the name of the current function.  The index number is
+     repeated after it.
+
+     If the function is part of a cycle of recursion, the cycle number
+     is printed between the function's name and the index number (*note
+     How Mutually Recursive Functions Are Described: Cycles.).  For
+     example, if function `gnurr' is part of cycle number one, and has
+     index number twelve, its primary line would be end like this:
+
+          gnurr <cycle 1> [12]
+
+
+File: gprof.info,  Node: Callers,  Next: Subroutines,  Prev: Primary,  Up: Call Graph
+
+5.2.2 Lines for a Function's Callers
+------------------------------------
+
+A function's entry has a line for each function it was called by.
+These lines' fields correspond to the fields of the primary line, but
+their meanings are different because of the difference in context.
+
+   For reference, we repeat two lines from the entry for the function
+`report', the primary line and one caller-line preceding it, together
+with the heading line that shows the names of the fields:
+
+     index  % time    self  children called     name
+     ...
+                     0.00    0.05       1/1           main [2]
+     [3]    100.0    0.00    0.05       1         report [3]
+
+   Here are the meanings of the fields in the caller-line for `report'
+called from `main':
+
+`self'
+     An estimate of the amount of time spent in `report' itself when it
+     was called from `main'.
+
+`children'
+     An estimate of the amount of time spent in subroutines of `report'
+     when `report' was called from `main'.
+
+     The sum of the `self' and `children' fields is an estimate of the
+     amount of time spent within calls to `report' from `main'.
+
+`called'
+     Two numbers: the number of times `report' was called from `main',
+     followed by the total number of non-recursive calls to `report'
+     from all its callers.
+
+`name and index number'
+     The name of the caller of `report' to which this line applies,
+     followed by the caller's index number.
+
+     Not all functions have entries in the call graph; some options to
+     `gprof' request the omission of certain functions.  When a caller
+     has no entry of its own, it still has caller-lines in the entries
+     of the functions it calls.
+
+     If the caller is part of a recursion cycle, the cycle number is
+     printed between the name and the index number.
+
+   If the identity of the callers of a function cannot be determined, a
+dummy caller-line is printed which has `<spontaneous>' as the "caller's
+name" and all other fields blank.  This can happen for signal handlers.
+
+
+File: gprof.info,  Node: Subroutines,  Next: Cycles,  Prev: Callers,  Up: Call Graph
+
+5.2.3 Lines for a Function's Subroutines
+----------------------------------------
+
+A function's entry has a line for each of its subroutines--in other
+words, a line for each other function that it called.  These lines'
+fields correspond to the fields of the primary line, but their meanings
+are different because of the difference in context.
+
+   For reference, we repeat two lines from the entry for the function
+`main', the primary line and a line for a subroutine, together with the
+heading line that shows the names of the fields:
+
+     index  % time    self  children called     name
+     ...
+     [2]    100.0    0.00    0.05       1         main [2]
+                     0.00    0.05       1/1           report [3]
+
+   Here are the meanings of the fields in the subroutine-line for `main'
+calling `report':
+
+`self'
+     An estimate of the amount of time spent directly within `report'
+     when `report' was called from `main'.
+
+`children'
+     An estimate of the amount of time spent in subroutines of `report'
+     when `report' was called from `main'.
+
+     The sum of the `self' and `children' fields is an estimate of the
+     total time spent in calls to `report' from `main'.
+
+`called'
+     Two numbers, the number of calls to `report' from `main' followed
+     by the total number of non-recursive calls to `report'.  This
+     ratio is used to determine how much of `report''s `self' and
+     `children' time gets credited to `main'.  *Note Estimating
+     `children' Times: Assumptions.
+
+`name'
+     The name of the subroutine of `main' to which this line applies,
+     followed by the subroutine's index number.
+
+     If the caller is part of a recursion cycle, the cycle number is
+     printed between the name and the index number.
+
+
+File: gprof.info,  Node: Cycles,  Prev: Subroutines,  Up: Call Graph
+
+5.2.4 How Mutually Recursive Functions Are Described
+----------------------------------------------------
+
+The graph may be complicated by the presence of "cycles of recursion"
+in the call graph.  A cycle exists if a function calls another function
+that (directly or indirectly) calls (or appears to call) the original
+function.  For example: if `a' calls `b', and `b' calls `a', then `a'
+and `b' form a cycle.
+
+   Whenever there are call paths both ways between a pair of functions,
+they belong to the same cycle.  If `a' and `b' call each other and `b'
+and `c' call each other, all three make one cycle.  Note that even if
+`b' only calls `a' if it was not called from `a', `gprof' cannot
+determine this, so `a' and `b' are still considered a cycle.
+
+   The cycles are numbered with consecutive integers.  When a function
+belongs to a cycle, each time the function name appears in the call
+graph it is followed by `<cycle NUMBER>'.
+
+   The reason cycles matter is that they make the time values in the
+call graph paradoxical.  The "time spent in children" of `a' should
+include the time spent in its subroutine `b' and in `b''s
+subroutines--but one of `b''s subroutines is `a'!  How much of `a''s
+time should be included in the children of `a', when `a' is indirectly
+recursive?
+
+   The way `gprof' resolves this paradox is by creating a single entry
+for the cycle as a whole.  The primary line of this entry describes the
+total time spent directly in the functions of the cycle.  The
+"subroutines" of the cycle are the individual functions of the cycle,
+and all other functions that were called directly by them.  The
+"callers" of the cycle are the functions, outside the cycle, that
+called functions in the cycle.
+
+   Here is an example portion of a call graph which shows a cycle
+containing functions `a' and `b'.  The cycle was entered by a call to
+`a' from `main'; both `a' and `b' called `c'.
+
+     index  % time    self  children called     name
+     ----------------------------------------
+                      1.77        0    1/1        main [2]
+     [3]     91.71    1.77        0    1+5    <cycle 1 as a whole> [3]
+                      1.02        0    3          b <cycle 1> [4]
+                      0.75        0    2          a <cycle 1> [5]
+     ----------------------------------------
+                                       3          a <cycle 1> [5]
+     [4]     52.85    1.02        0    0      b <cycle 1> [4]
+                                       2          a <cycle 1> [5]
+                         0        0    3/6        c [6]
+     ----------------------------------------
+                      1.77        0    1/1        main [2]
+                                       2          b <cycle 1> [4]
+     [5]     38.86    0.75        0    1      a <cycle 1> [5]
+                                       3          b <cycle 1> [4]
+                         0        0    3/6        c [6]
+     ----------------------------------------
+
+(The entire call graph for this program contains in addition an entry
+for `main', which calls `a', and an entry for `c', with callers `a' and
+`b'.)
+
+     index  % time    self  children called     name
+                                                  <spontaneous>
+     [1]    100.00       0     1.93    0      start [1]
+                      0.16     1.77    1/1        main [2]
+     ----------------------------------------
+                      0.16     1.77    1/1        start [1]
+     [2]    100.00    0.16     1.77    1      main [2]
+                      1.77        0    1/1        a <cycle 1> [5]
+     ----------------------------------------
+                      1.77        0    1/1        main [2]
+     [3]     91.71    1.77        0    1+5    <cycle 1 as a whole> [3]
+                      1.02        0    3          b <cycle 1> [4]
+                      0.75        0    2          a <cycle 1> [5]
+                         0        0    6/6        c [6]
+     ----------------------------------------
+                                       3          a <cycle 1> [5]
+     [4]     52.85    1.02        0    0      b <cycle 1> [4]
+                                       2          a <cycle 1> [5]
+                         0        0    3/6        c [6]
+     ----------------------------------------
+                      1.77        0    1/1        main [2]
+                                       2          b <cycle 1> [4]
+     [5]     38.86    0.75        0    1      a <cycle 1> [5]
+                                       3          b <cycle 1> [4]
+                         0        0    3/6        c [6]
+     ----------------------------------------
+                         0        0    3/6        b <cycle 1> [4]
+                         0        0    3/6        a <cycle 1> [5]
+     [6]      0.00       0        0    6      c [6]
+     ----------------------------------------
+
+   The `self' field of the cycle's primary line is the total time spent
+in all the functions of the cycle.  It equals the sum of the `self'
+fields for the individual functions in the cycle, found in the entry in
+the subroutine lines for these functions.
+
+   The `children' fields of the cycle's primary line and subroutine
+lines count only subroutines outside the cycle.  Even though `a' calls
+`b', the time spent in those calls to `b' is not counted in `a''s
+`children' time.  Thus, we do not encounter the problem of what to do
+when the time in those calls to `b' includes indirect recursive calls
+back to `a'.
+
+   The `children' field of a caller-line in the cycle's entry estimates
+the amount of time spent _in the whole cycle_, and its other
+subroutines, on the times when that caller called a function in the
+cycle.
+
+   The `called' field in the primary line for the cycle has two numbers:
+first, the number of times functions in the cycle were called by
+functions outside the cycle; second, the number of times they were
+called by functions in the cycle (including times when a function in
+the cycle calls itself).  This is a generalization of the usual split
+into non-recursive and recursive calls.
+
+   The `called' field of a subroutine-line for a cycle member in the
+cycle's entry says how many time that function was called from
+functions in the cycle.  The total of all these is the second number in
+the primary line's `called' field.
+
+   In the individual entry for a function in a cycle, the other
+functions in the same cycle can appear as subroutines and as callers.
+These lines show how many times each function in the cycle called or
+was called from each other function in the cycle.  The `self' and
+`children' fields in these lines are blank because of the difficulty of
+defining meanings for them when recursion is going on.
+
+
+File: gprof.info,  Node: Line-by-line,  Next: Annotated Source,  Prev: Call Graph,  Up: Output
+
+5.3 Line-by-line Profiling
+==========================
+
+`gprof''s `-l' option causes the program to perform "line-by-line"
+profiling.  In this mode, histogram samples are assigned not to
+functions, but to individual lines of source code.  This only works
+with programs compiled with older versions of the `gcc' compiler.
+Newer versions of `gcc' use a different program - `gcov' - to display
+line-by-line profiling information.
+
+   With the older versions of `gcc' the program usually has to be
+compiled with a `-g' option, in addition to `-pg', in order to generate
+debugging symbols for tracking source code lines.  Note, in much older
+versions of `gcc' the program had to be compiled with the `-a' command
+line option as well.
+
+   The flat profile is the most useful output table in line-by-line
+mode.  The call graph isn't as useful as normal, since the current
+version of `gprof' does not propagate call graph arcs from source code
+lines to the enclosing function.  The call graph does, however, show
+each line of code that called each function, along with a count.
+
+   Here is a section of `gprof''s output, without line-by-line
+profiling.  Note that `ct_init' accounted for four histogram hits, and
+13327 calls to `init_block'.
+
+     Flat profile:
+
+     Each sample counts as 0.01 seconds.
+       %   cumulative   self              self     total
+      time   seconds   seconds    calls  us/call  us/call  name
+      30.77      0.13     0.04     6335     6.31     6.31  ct_init
+
+
+     		     Call graph (explanation follows)
+
+
+     granularity: each sample hit covers 4 byte(s) for 7.69% of 0.13 seconds
+
+     index % time    self  children    called     name
+
+                     0.00    0.00       1/13496       name_too_long
+                     0.00    0.00      40/13496       deflate
+                     0.00    0.00     128/13496       deflate_fast
+                     0.00    0.00   13327/13496       ct_init
+     [7]      0.0    0.00    0.00   13496         init_block
+
+   Now let's look at some of `gprof''s output from the same program run,
+this time with line-by-line profiling enabled.  Note that `ct_init''s
+four histogram hits are broken down into four lines of source code--one
+hit occurred on each of lines 349, 351, 382 and 385.  In the call graph,
+note how `ct_init''s 13327 calls to `init_block' are broken down into
+one call from line 396, 3071 calls from line 384, 3730 calls from line
+385, and 6525 calls from 387.
+
+     Flat profile:
+
+     Each sample counts as 0.01 seconds.
+       %   cumulative   self
+      time   seconds   seconds    calls  name
+       7.69      0.10     0.01           ct_init (trees.c:349)
+       7.69      0.11     0.01           ct_init (trees.c:351)
+       7.69      0.12     0.01           ct_init (trees.c:382)
+       7.69      0.13     0.01           ct_init (trees.c:385)
+
+
+     		     Call graph (explanation follows)
+
+
+     granularity: each sample hit covers 4 byte(s) for 7.69% of 0.13 seconds
+
+       % time    self  children    called     name
+
+                 0.00    0.00       1/13496       name_too_long (gzip.c:1440)
+                 0.00    0.00       1/13496       deflate (deflate.c:763)
+                 0.00    0.00       1/13496       ct_init (trees.c:396)
+                 0.00    0.00       2/13496       deflate (deflate.c:727)
+                 0.00    0.00       4/13496       deflate (deflate.c:686)
+                 0.00    0.00       5/13496       deflate (deflate.c:675)
+                 0.00    0.00      12/13496       deflate (deflate.c:679)
+                 0.00    0.00      16/13496       deflate (deflate.c:730)
+                 0.00    0.00     128/13496       deflate_fast (deflate.c:654)
+                 0.00    0.00    3071/13496       ct_init (trees.c:384)
+                 0.00    0.00    3730/13496       ct_init (trees.c:385)
+                 0.00    0.00    6525/13496       ct_init (trees.c:387)
+     [6]  0.0    0.00    0.00   13496         init_block (trees.c:408)
+
+
+File: gprof.info,  Node: Annotated Source,  Prev: Line-by-line,  Up: Output
+
+5.4 The Annotated Source Listing
+================================
+
+`gprof''s `-A' option triggers an annotated source listing, which lists
+the program's source code, each function labeled with the number of
+times it was called.  You may also need to specify the `-I' option, if
+`gprof' can't find the source code files.
+
+   With older versions of `gcc' compiling with `gcc ... -g -pg -a'
+augments your program with basic-block counting code, in addition to
+function counting code.  This enables `gprof' to determine how many
+times each line of code was executed.  With newer versions of `gcc'
+support for displaying basic-block counts is provided by the `gcov'
+program.
+
+   For example, consider the following function, taken from gzip, with
+line numbers added:
+
+      1 ulg updcrc(s, n)
+      2     uch *s;
+      3     unsigned n;
+      4 {
+      5     register ulg c;
+      6
+      7     static ulg crc = (ulg)0xffffffffL;
+      8
+      9     if (s == NULL) {
+     10         c = 0xffffffffL;
+     11     } else {
+     12         c = crc;
+     13         if (n) do {
+     14             c = crc_32_tab[...];
+     15         } while (--n);
+     16     }
+     17     crc = c;
+     18     return c ^ 0xffffffffL;
+     19 }
+
+   `updcrc' has at least five basic-blocks.  One is the function
+itself.  The `if' statement on line 9 generates two more basic-blocks,
+one for each branch of the `if'.  A fourth basic-block results from the
+`if' on line 13, and the contents of the `do' loop form the fifth
+basic-block.  The compiler may also generate additional basic-blocks to
+handle various special cases.
+
+   A program augmented for basic-block counting can be analyzed with
+`gprof -l -A'.  The `-x' option is also helpful, to ensure that each
+line of code is labeled at least once.  Here is `updcrc''s annotated
+source listing for a sample `gzip' run:
+
+                     ulg updcrc(s, n)
+                         uch *s;
+                         unsigned n;
+                 2 ->{
+                         register ulg c;
+
+                         static ulg crc = (ulg)0xffffffffL;
+
+                 2 ->    if (s == NULL) {
+                 1 ->        c = 0xffffffffL;
+                 1 ->    } else {
+                 1 ->        c = crc;
+                 1 ->        if (n) do {
+             26312 ->            c = crc_32_tab[...];
+     26312,1,26311 ->        } while (--n);
+                         }
+                 2 ->    crc = c;
+                 2 ->    return c ^ 0xffffffffL;
+                 2 ->}
+
+   In this example, the function was called twice, passing once through
+each branch of the `if' statement.  The body of the `do' loop was
+executed a total of 26312 times.  Note how the `while' statement is
+annotated.  It began execution 26312 times, once for each iteration
+through the loop.  One of those times (the last time) it exited, while
+it branched back to the beginning of the loop 26311 times.
+
+
+File: gprof.info,  Node: Inaccuracy,  Next: How do I?,  Prev: Output,  Up: Top
+
+6 Inaccuracy of `gprof' Output
+******************************
+
+* Menu:
+
+* Sampling Error::      Statistical margins of error
+* Assumptions::         Estimating children times
+
+
+File: gprof.info,  Node: Sampling Error,  Next: Assumptions,  Up: Inaccuracy
+
+6.1 Statistical Sampling Error
+==============================
+
+The run-time figures that `gprof' gives you are based on a sampling
+process, so they are subject to statistical inaccuracy.  If a function
+runs only a small amount of time, so that on the average the sampling
+process ought to catch that function in the act only once, there is a
+pretty good chance it will actually find that function zero times, or
+twice.
+
+   By contrast, the number-of-calls and basic-block figures are derived
+by counting, not sampling.  They are completely accurate and will not
+vary from run to run if your program is deterministic and single
+threaded.  In multi-threaded applications, or single threaded
+applications that link with multi-threaded libraries, the counts are
+only deterministic if the counting function is thread-safe.  (Note:
+beware that the mcount counting function in glibc is _not_
+thread-safe).  *Note Implementation of Profiling: Implementation.
+
+   The "sampling period" that is printed at the beginning of the flat
+profile says how often samples are taken.  The rule of thumb is that a
+run-time figure is accurate if it is considerably bigger than the
+sampling period.
+
+   The actual amount of error can be predicted.  For N samples, the
+_expected_ error is the square-root of N.  For example, if the sampling
+period is 0.01 seconds and `foo''s run-time is 1 second, N is 100
+samples (1 second/0.01 seconds), sqrt(N) is 10 samples, so the expected
+error in `foo''s run-time is 0.1 seconds (10*0.01 seconds), or ten
+percent of the observed value.  Again, if the sampling period is 0.01
+seconds and `bar''s run-time is 100 seconds, N is 10000 samples,
+sqrt(N) is 100 samples, so the expected error in `bar''s run-time is 1
+second, or one percent of the observed value.  It is likely to vary
+this much _on the average_ from one profiling run to the next.
+(_Sometimes_ it will vary more.)
+
+   This does not mean that a small run-time figure is devoid of
+information.  If the program's _total_ run-time is large, a small
+run-time for one function does tell you that that function used an
+insignificant fraction of the whole program's time.  Usually this means
+it is not worth optimizing.
+
+   One way to get more accuracy is to give your program more (but
+similar) input data so it will take longer.  Another way is to combine
+the data from several runs, using the `-s' option of `gprof'.  Here is
+how:
+
+  1. Run your program once.
+
+  2. Issue the command `mv gmon.out gmon.sum'.
+
+  3. Run your program again, the same as before.
+
+  4. Merge the new data in `gmon.out' into `gmon.sum' with this command:
+
+          gprof -s EXECUTABLE-FILE gmon.out gmon.sum
+
+  5. Repeat the last two steps as often as you wish.
+
+  6. Analyze the cumulative data using this command:
+
+          gprof EXECUTABLE-FILE gmon.sum > OUTPUT-FILE
+
+
+File: gprof.info,  Node: Assumptions,  Prev: Sampling Error,  Up: Inaccuracy
+
+6.2 Estimating `children' Times
+===============================
+
+Some of the figures in the call graph are estimates--for example, the
+`children' time values and all the time figures in caller and
+subroutine lines.
+
+   There is no direct information about these measurements in the
+profile data itself.  Instead, `gprof' estimates them by making an
+assumption about your program that might or might not be true.
+
+   The assumption made is that the average time spent in each call to
+any function `foo' is not correlated with who called `foo'.  If `foo'
+used 5 seconds in all, and 2/5 of the calls to `foo' came from `a',
+then `foo' contributes 2 seconds to `a''s `children' time, by
+assumption.
+
+   This assumption is usually true enough, but for some programs it is
+far from true.  Suppose that `foo' returns very quickly when its
+argument is zero; suppose that `a' always passes zero as an argument,
+while other callers of `foo' pass other arguments.  In this program,
+all the time spent in `foo' is in the calls from callers other than `a'.
+But `gprof' has no way of knowing this; it will blindly and incorrectly
+charge 2 seconds of time in `foo' to the children of `a'.
+
+   We hope some day to put more complete data into `gmon.out', so that
+this assumption is no longer needed, if we can figure out how.  For the
+novice, the estimated figures are usually more useful than misleading.
+
+
+File: gprof.info,  Node: How do I?,  Next: Incompatibilities,  Prev: Inaccuracy,  Up: Top
+
+7 Answers to Common Questions
+*****************************
+
+How can I get more exact information about hot spots in my program?
+     Looking at the per-line call counts only tells part of the story.
+     Because `gprof' can only report call times and counts by function,
+     the best way to get finer-grained information on where the program
+     is spending its time is to re-factor large functions into sequences
+     of calls to smaller ones.  Beware however that this can introduce
+     artificial hot spots since compiling with `-pg' adds a significant
+     overhead to function calls.  An alternative solution is to use a
+     non-intrusive profiler, e.g. oprofile.
+
+How do I find which lines in my program were executed the most times?
+     Use the `gcov' program.
+
+How do I find which lines in my program called a particular function?
+     Use `gprof -l' and lookup the function in the call graph.  The
+     callers will be broken down by function and line number.
+
+How do I analyze a program that runs for less than a second?
+     Try using a shell script like this one:
+
+          for i in `seq 1 100`; do
+            fastprog
+            mv gmon.out gmon.out.$i
+          done
+
+          gprof -s fastprog gmon.out.*
+
+          gprof fastprog gmon.sum
+
+     If your program is completely deterministic, all the call counts
+     will be simple multiples of 100 (i.e., a function called once in
+     each run will appear with a call count of 100).
+
+
+
+File: gprof.info,  Node: Incompatibilities,  Next: Details,  Prev: How do I?,  Up: Top
+
+8 Incompatibilities with Unix `gprof'
+*************************************
+
+GNU `gprof' and Berkeley Unix `gprof' use the same data file
+`gmon.out', and provide essentially the same information.  But there
+are a few differences.
+
+   * GNU `gprof' uses a new, generalized file format with support for
+     basic-block execution counts and non-realtime histograms.  A magic
+     cookie and version number allows `gprof' to easily identify new
+     style files.  Old BSD-style files can still be read.  *Note
+     Profiling Data File Format: File Format.
+
+   * For a recursive function, Unix `gprof' lists the function as a
+     parent and as a child, with a `calls' field that lists the number
+     of recursive calls.  GNU `gprof' omits these lines and puts the
+     number of recursive calls in the primary line.
+
+   * When a function is suppressed from the call graph with `-e', GNU
+     `gprof' still lists it as a subroutine of functions that call it.
+
+   * GNU `gprof' accepts the `-k' with its argument in the form
+     `from/to', instead of `from to'.
+
+   * In the annotated source listing, if there are multiple basic
+     blocks on the same line, GNU `gprof' prints all of their counts,
+     separated by commas.
+
+   * The blurbs, field widths, and output formats are different.  GNU
+     `gprof' prints blurbs after the tables, so that you can see the
+     tables without skipping the blurbs.
+
+
+File: gprof.info,  Node: Details,  Next: GNU Free Documentation License,  Prev: Incompatibilities,  Up: Top
+
+9 Details of Profiling
+**********************
+
+* Menu:
+
+* Implementation::      How a program collects profiling information
+* File Format::         Format of `gmon.out' files
+* Internals::           `gprof''s internal operation
+* Debugging::           Using `gprof''s `-d' option
+
+
+File: gprof.info,  Node: Implementation,  Next: File Format,  Up: Details
+
+9.1 Implementation of Profiling
+===============================
+
+Profiling works by changing how every function in your program is
+compiled so that when it is called, it will stash away some information
+about where it was called from.  From this, the profiler can figure out
+what function called it, and can count how many times it was called.
+This change is made by the compiler when your program is compiled with
+the `-pg' option, which causes every function to call `mcount' (or
+`_mcount', or `__mcount', depending on the OS and compiler) as one of
+its first operations.
+
+   The `mcount' routine, included in the profiling library, is
+responsible for recording in an in-memory call graph table both its
+parent routine (the child) and its parent's parent.  This is typically
+done by examining the stack frame to find both the address of the
+child, and the return address in the original parent.  Since this is a
+very machine-dependent operation, `mcount' itself is typically a short
+assembly-language stub routine that extracts the required information,
+and then calls `__mcount_internal' (a normal C function) with two
+arguments--`frompc' and `selfpc'.  `__mcount_internal' is responsible
+for maintaining the in-memory call graph, which records `frompc',
+`selfpc', and the number of times each of these call arcs was traversed.
+
+   GCC Version 2 provides a magical function
+(`__builtin_return_address'), which allows a generic `mcount' function
+to extract the required information from the stack frame.  However, on
+some architectures, most notably the SPARC, using this builtin can be
+very computationally expensive, and an assembly language version of
+`mcount' is used for performance reasons.
+
+   Number-of-calls information for library routines is collected by
+using a special version of the C library.  The programs in it are the
+same as in the usual C library, but they were compiled with `-pg'.  If
+you link your program with `gcc ... -pg', it automatically uses the
+profiling version of the library.
+
+   Profiling also involves watching your program as it runs, and
+keeping a histogram of where the program counter happens to be every
+now and then.  Typically the program counter is looked at around 100
+times per second of run time, but the exact frequency may vary from
+system to system.
+
+   This is done is one of two ways.  Most UNIX-like operating systems
+provide a `profil()' system call, which registers a memory array with
+the kernel, along with a scale factor that determines how the program's
+address space maps into the array.  Typical scaling values cause every
+2 to 8 bytes of address space to map into a single array slot.  On
+every tick of the system clock (assuming the profiled program is
+running), the value of the program counter is examined and the
+corresponding slot in the memory array is incremented.  Since this is
+done in the kernel, which had to interrupt the process anyway to handle
+the clock interrupt, very little additional system overhead is required.
+
+   However, some operating systems, most notably Linux 2.0 (and
+earlier), do not provide a `profil()' system call.  On such a system,
+arrangements are made for the kernel to periodically deliver a signal
+to the process (typically via `setitimer()'), which then performs the
+same operation of examining the program counter and incrementing a slot
+in the memory array.  Since this method requires a signal to be
+delivered to user space every time a sample is taken, it uses
+considerably more overhead than kernel-based profiling.  Also, due to
+the added delay required to deliver the signal, this method is less
+accurate as well.
+
+   A special startup routine allocates memory for the histogram and
+either calls `profil()' or sets up a clock signal handler.  This
+routine (`monstartup') can be invoked in several ways.  On Linux
+systems, a special profiling startup file `gcrt0.o', which invokes
+`monstartup' before `main', is used instead of the default `crt0.o'.
+Use of this special startup file is one of the effects of using `gcc
+... -pg' to link.  On SPARC systems, no special startup files are used.
+Rather, the `mcount' routine, when it is invoked for the first time
+(typically when `main' is called), calls `monstartup'.
+
+   If the compiler's `-a' option was used, basic-block counting is also
+enabled.  Each object file is then compiled with a static array of
+counts, initially zero.  In the executable code, every time a new
+basic-block begins (i.e., when an `if' statement appears), an extra
+instruction is inserted to increment the corresponding count in the
+array.  At compile time, a paired array was constructed that recorded
+the starting address of each basic-block.  Taken together, the two
+arrays record the starting address of every basic-block, along with the
+number of times it was executed.
+
+   The profiling library also includes a function (`mcleanup') which is
+typically registered using `atexit()' to be called as the program
+exits, and is responsible for writing the file `gmon.out'.  Profiling
+is turned off, various headers are output, and the histogram is
+written, followed by the call-graph arcs and the basic-block counts.
+
+   The output from `gprof' gives no indication of parts of your program
+that are limited by I/O or swapping bandwidth.  This is because samples
+of the program counter are taken at fixed intervals of the program's
+run time.  Therefore, the time measurements in `gprof' output say
+nothing about time that your program was not running.  For example, a
+part of the program that creates so much data that it cannot all fit in
+physical memory at once may run very slowly due to thrashing, but
+`gprof' will say it uses little time.  On the other hand, sampling by
+run time has the advantage that the amount of load due to other users
+won't directly affect the output you get.
+
+
+File: gprof.info,  Node: File Format,  Next: Internals,  Prev: Implementation,  Up: Details
+
+9.2 Profiling Data File Format
+==============================
+
+The old BSD-derived file format used for profile data does not contain a
+magic cookie that allows to check whether a data file really is a
+`gprof' file.  Furthermore, it does not provide a version number, thus
+rendering changes to the file format almost impossible.  GNU `gprof'
+uses a new file format that provides these features.  For backward
+compatibility, GNU `gprof' continues to support the old BSD-derived
+format, but not all features are supported with it.  For example,
+basic-block execution counts cannot be accommodated by the old file
+format.
+
+   The new file format is defined in header file `gmon_out.h'.  It
+consists of a header containing the magic cookie and a version number,
+as well as some spare bytes available for future extensions.  All data
+in a profile data file is in the native format of the target for which
+the profile was collected.  GNU `gprof' adapts automatically to the
+byte-order in use.
+
+   In the new file format, the header is followed by a sequence of
+records.  Currently, there are three different record types: histogram
+records, call-graph arc records, and basic-block execution count
+records.  Each file can contain any number of each record type.  When
+reading a file, GNU `gprof' will ensure records of the same type are
+compatible with each other and compute the union of all records.  For
+example, for basic-block execution counts, the union is simply the sum
+of all execution counts for each basic-block.
+
+9.2.1 Histogram Records
+-----------------------
+
+Histogram records consist of a header that is followed by an array of
+bins.  The header contains the text-segment range that the histogram
+spans, the size of the histogram in bytes (unlike in the old BSD
+format, this does not include the size of the header), the rate of the
+profiling clock, and the physical dimension that the bin counts
+represent after being scaled by the profiling clock rate.  The physical
+dimension is specified in two parts: a long name of up to 15 characters
+and a single character abbreviation.  For example, a histogram
+representing real-time would specify the long name as "seconds" and the
+abbreviation as "s".  This feature is useful for architectures that
+support performance monitor hardware (which, fortunately, is becoming
+increasingly common).  For example, under DEC OSF/1, the "uprofile"
+command can be used to produce a histogram of, say, instruction cache
+misses.  In this case, the dimension in the histogram header could be
+set to "i-cache misses" and the abbreviation could be set to "1"
+(because it is simply a count, not a physical dimension).  Also, the
+profiling rate would have to be set to 1 in this case.
+
+   Histogram bins are 16-bit numbers and each bin represent an equal
+amount of text-space.  For example, if the text-segment is one thousand
+bytes long and if there are ten bins in the histogram, each bin
+represents one hundred bytes.
+
+9.2.2 Call-Graph Records
+------------------------
+
+Call-graph records have a format that is identical to the one used in
+the BSD-derived file format.  It consists of an arc in the call graph
+and a count indicating the number of times the arc was traversed during
+program execution.  Arcs are specified by a pair of addresses: the
+first must be within caller's function and the second must be within
+the callee's function.  When performing profiling at the function
+level, these addresses can point anywhere within the respective
+function.  However, when profiling at the line-level, it is better if
+the addresses are as close to the call-site/entry-point as possible.
+This will ensure that the line-level call-graph is able to identify
+exactly which line of source code performed calls to a function.
+
+9.2.3 Basic-Block Execution Count Records
+-----------------------------------------
+
+Basic-block execution count records consist of a header followed by a
+sequence of address/count pairs.  The header simply specifies the
+length of the sequence.  In an address/count pair, the address
+identifies a basic-block and the count specifies the number of times
+that basic-block was executed.  Any address within the basic-address can
+be used.
+
+
+File: gprof.info,  Node: Internals,  Next: Debugging,  Prev: File Format,  Up: Details
+
+9.3 `gprof''s Internal Operation
+================================
+
+Like most programs, `gprof' begins by processing its options.  During
+this stage, it may building its symspec list (`sym_ids.c:sym_id_add'),
+if options are specified which use symspecs.  `gprof' maintains a
+single linked list of symspecs, which will eventually get turned into
+12 symbol tables, organized into six include/exclude pairs--one pair
+each for the flat profile (INCL_FLAT/EXCL_FLAT), the call graph arcs
+(INCL_ARCS/EXCL_ARCS), printing in the call graph
+(INCL_GRAPH/EXCL_GRAPH), timing propagation in the call graph
+(INCL_TIME/EXCL_TIME), the annotated source listing
+(INCL_ANNO/EXCL_ANNO), and the execution count listing
+(INCL_EXEC/EXCL_EXEC).
+
+   After option processing, `gprof' finishes building the symspec list
+by adding all the symspecs in `default_excluded_list' to the exclude
+lists EXCL_TIME and EXCL_GRAPH, and if line-by-line profiling is
+specified, EXCL_FLAT as well.  These default excludes are not added to
+EXCL_ANNO, EXCL_ARCS, and EXCL_EXEC.
+
+   Next, the BFD library is called to open the object file, verify that
+it is an object file, and read its symbol table (`core.c:core_init'),
+using `bfd_canonicalize_symtab' after mallocing an appropriately sized
+array of symbols.  At this point, function mappings are read (if the
+`--file-ordering' option has been specified), and the core text space
+is read into memory (if the `-c' option was given).
+
+   `gprof''s own symbol table, an array of Sym structures, is now built.
+This is done in one of two ways, by one of two routines, depending on
+whether line-by-line profiling (`-l' option) has been enabled.  For
+normal profiling, the BFD canonical symbol table is scanned.  For
+line-by-line profiling, every text space address is examined, and a new
+symbol table entry gets created every time the line number changes.  In
+either case, two passes are made through the symbol table--one to count
+the size of the symbol table required, and the other to actually read
+the symbols.  In between the two passes, a single array of type `Sym'
+is created of the appropriate length.  Finally,
+`symtab.c:symtab_finalize' is called to sort the symbol table and
+remove duplicate entries (entries with the same memory address).
+
+   The symbol table must be a contiguous array for two reasons.  First,
+the `qsort' library function (which sorts an array) will be used to
+sort the symbol table.  Also, the symbol lookup routine
+(`symtab.c:sym_lookup'), which finds symbols based on memory address,
+uses a binary search algorithm which requires the symbol table to be a
+sorted array.  Function symbols are indicated with an `is_func' flag.
+Line number symbols have no special flags set.  Additionally, a symbol
+can have an `is_static' flag to indicate that it is a local symbol.
+
+   With the symbol table read, the symspecs can now be translated into
+Syms (`sym_ids.c:sym_id_parse').  Remember that a single symspec can
+match multiple symbols.  An array of symbol tables (`syms') is created,
+each entry of which is a symbol table of Syms to be included or
+excluded from a particular listing.  The master symbol table and the
+symspecs are examined by nested loops, and every symbol that matches a
+symspec is inserted into the appropriate syms table.  This is done
+twice, once to count the size of each required symbol table, and again
+to build the tables, which have been malloced between passes.  From now
+on, to determine whether a symbol is on an include or exclude symspec
+list, `gprof' simply uses its standard symbol lookup routine on the
+appropriate table in the `syms' array.
+
+   Now the profile data file(s) themselves are read
+(`gmon_io.c:gmon_out_read'), first by checking for a new-style
+`gmon.out' header, then assuming this is an old-style BSD `gmon.out' if
+the magic number test failed.
+
+   New-style histogram records are read by `hist.c:hist_read_rec'.  For
+the first histogram record, allocate a memory array to hold all the
+bins, and read them in.  When multiple profile data files (or files
+with multiple histogram records) are read, the memory ranges of each
+pair of histogram records must be either equal, or non-overlapping.
+For each pair of histogram records, the resolution (memory region size
+divided by the number of bins) must be the same.  The time unit must be
+the same for all histogram records. If the above containts are met, all
+histograms for the same memory range are merged.
+
+   As each call graph record is read (`call_graph.c:cg_read_rec'), the
+parent and child addresses are matched to symbol table entries, and a
+call graph arc is created by `cg_arcs.c:arc_add', unless the arc fails
+a symspec check against INCL_ARCS/EXCL_ARCS.  As each arc is added, a
+linked list is maintained of the parent's child arcs, and of the child's
+parent arcs.  Both the child's call count and the arc's call count are
+incremented by the record's call count.
+
+   Basic-block records are read (`basic_blocks.c:bb_read_rec'), but
+only if line-by-line profiling has been selected.  Each basic-block
+address is matched to a corresponding line symbol in the symbol table,
+and an entry made in the symbol's bb_addr and bb_calls arrays.  Again,
+if multiple basic-block records are present for the same address, the
+call counts are cumulative.
+
+   A gmon.sum file is dumped, if requested (`gmon_io.c:gmon_out_write').
+
+   If histograms were present in the data files, assign them to symbols
+(`hist.c:hist_assign_samples') by iterating over all the sample bins
+and assigning them to symbols.  Since the symbol table is sorted in
+order of ascending memory addresses, we can simple follow along in the
+symbol table as we make our pass over the sample bins.  This step
+includes a symspec check against INCL_FLAT/EXCL_FLAT.  Depending on the
+histogram scale factor, a sample bin may span multiple symbols, in
+which case a fraction of the sample count is allocated to each symbol,
+proportional to the degree of overlap.  This effect is rare for normal
+profiling, but overlaps are more common during line-by-line profiling,
+and can cause each of two adjacent lines to be credited with half a
+hit, for example.
+
+   If call graph data is present, `cg_arcs.c:cg_assemble' is called.
+First, if `-c' was specified, a machine-dependent routine (`find_call')
+scans through each symbol's machine code, looking for subroutine call
+instructions, and adding them to the call graph with a zero call count.
+A topological sort is performed by depth-first numbering all the
+symbols (`cg_dfn.c:cg_dfn'), so that children are always numbered less
+than their parents, then making a array of pointers into the symbol
+table and sorting it into numerical order, which is reverse topological
+order (children appear before parents).  Cycles are also detected at
+this point, all members of which are assigned the same topological
+number.  Two passes are now made through this sorted array of symbol
+pointers.  The first pass, from end to beginning (parents to children),
+computes the fraction of child time to propagate to each parent and a
+print flag.  The print flag reflects symspec handling of
+INCL_GRAPH/EXCL_GRAPH, with a parent's include or exclude (print or no
+print) property being propagated to its children, unless they
+themselves explicitly appear in INCL_GRAPH or EXCL_GRAPH.  A second
+pass, from beginning to end (children to parents) actually propagates
+the timings along the call graph, subject to a check against
+INCL_TIME/EXCL_TIME.  With the print flag, fractions, and timings now
+stored in the symbol structures, the topological sort array is now
+discarded, and a new array of pointers is assembled, this time sorted
+by propagated time.
+
+   Finally, print the various outputs the user requested, which is now
+fairly straightforward.  The call graph (`cg_print.c:cg_print') and
+flat profile (`hist.c:hist_print') are regurgitations of values already
+computed.  The annotated source listing
+(`basic_blocks.c:print_annotated_source') uses basic-block information,
+if present, to label each line of code with call counts, otherwise only
+the function call counts are presented.
+
+   The function ordering code is marginally well documented in the
+source code itself (`cg_print.c').  Basically, the functions with the
+most use and the most parents are placed first, followed by other
+functions with the most use, followed by lower use functions, followed
+by unused functions at the end.
+
+
+File: gprof.info,  Node: Debugging,  Prev: Internals,  Up: Details
+
+9.4 Debugging `gprof'
+=====================
+
+If `gprof' was compiled with debugging enabled, the `-d' option
+triggers debugging output (to stdout) which can be helpful in
+understanding its operation.  The debugging number specified is
+interpreted as a sum of the following options:
+
+2 - Topological sort
+     Monitor depth-first numbering of symbols during call graph analysis
+
+4 - Cycles
+     Shows symbols as they are identified as cycle heads
+
+16 - Tallying
+     As the call graph arcs are read, show each arc and how the total
+     calls to each function are tallied
+
+32 - Call graph arc sorting
+     Details sorting individual parents/children within each call graph
+     entry
+
+64 - Reading histogram and call graph records
+     Shows address ranges of histograms as they are read, and each call
+     graph arc
+
+128 - Symbol table
+     Reading, classifying, and sorting the symbol table from the object
+     file.  For line-by-line profiling (`-l' option), also shows line
+     numbers being assigned to memory addresses.
+
+256 - Static call graph
+     Trace operation of `-c' option
+
+512 - Symbol table and arc table lookups
+     Detail operation of lookup routines
+
+1024 - Call graph propagation
+     Shows how function times are propagated along the call graph
+
+2048 - Basic-blocks
+     Shows basic-block records as they are read from profile data (only
+     meaningful with `-l' option)
+
+4096 - Symspecs
+     Shows symspec-to-symbol pattern matching operation
+
+8192 - Annotate source
+     Tracks operation of `-A' option
+
+
+File: gprof.info,  Node: GNU Free Documentation License,  Prev: Details,  Up: Top
+
+Appendix A GNU Free Documentation License
+*****************************************
+
+                     Version 1.3, 3 November 2008
+
+     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+     `http://fsf.org/'
+
+     Everyone is permitted to copy and distribute verbatim copies
+     of this license document, but changing it is not allowed.
+
+  0. PREAMBLE
+
+     The purpose of this License is to make a manual, textbook, or other
+     functional and useful document "free" in the sense of freedom: to
+     assure everyone the effective freedom to copy and redistribute it,
+     with or without modifying it, either commercially or
+     noncommercially.  Secondarily, this License preserves for the
+     author and publisher a way to get credit for their work, while not
+     being considered responsible for modifications made by others.
+
+     This License is a kind of "copyleft", which means that derivative
+     works of the document must themselves be free in the same sense.
+     It complements the GNU General Public License, which is a copyleft
+     license designed for free software.
+
+     We have designed this License in order to use it for manuals for
+     free software, because free software needs free documentation: a
+     free program should come with manuals providing the same freedoms
+     that the software does.  But this License is not limited to
+     software manuals; it can be used for any textual work, regardless
+     of subject matter or whether it is published as a printed book.
+     We recommend this License principally for works whose purpose is
+     instruction or reference.
+
+  1. APPLICABILITY AND DEFINITIONS
+
+     This License applies to any manual or other work, in any medium,
+     that contains a notice placed by the copyright holder saying it
+     can be distributed under the terms of this License.  Such a notice
+     grants a world-wide, royalty-free license, unlimited in duration,
+     to use that work under the conditions stated herein.  The
+     "Document", below, refers to any such manual or work.  Any member
+     of the public is a licensee, and is addressed as "you".  You
+     accept the license if you copy, modify or distribute the work in a
+     way requiring permission under copyright law.
+
+     A "Modified Version" of the Document means any work containing the
+     Document or a portion of it, either copied verbatim, or with
+     modifications and/or translated into another language.
+
+     A "Secondary Section" is a named appendix or a front-matter section
+     of the Document that deals exclusively with the relationship of the
+     publishers or authors of the Document to the Document's overall
+     subject (or to related matters) and contains nothing that could
+     fall directly within that overall subject.  (Thus, if the Document
+     is in part a textbook of mathematics, a Secondary Section may not
+     explain any mathematics.)  The relationship could be a matter of
+     historical connection with the subject or with related matters, or
+     of legal, commercial, philosophical, ethical or political position
+     regarding them.
+
+     The "Invariant Sections" are certain Secondary Sections whose
+     titles are designated, as being those of Invariant Sections, in
+     the notice that says that the Document is released under this
+     License.  If a section does not fit the above definition of
+     Secondary then it is not allowed to be designated as Invariant.
+     The Document may contain zero Invariant Sections.  If the Document
+     does not identify any Invariant Sections then there are none.
+
+     The "Cover Texts" are certain short passages of text that are
+     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+     that says that the Document is released under this License.  A
+     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
+     be at most 25 words.
+
+     A "Transparent" copy of the Document means a machine-readable copy,
+     represented in a format whose specification is available to the
+     general public, that is suitable for revising the document
+     straightforwardly with generic text editors or (for images
+     composed of pixels) generic paint programs or (for drawings) some
+     widely available drawing editor, and that is suitable for input to
+     text formatters or for automatic translation to a variety of
+     formats suitable for input to text formatters.  A copy made in an
+     otherwise Transparent file format whose markup, or absence of
+     markup, has been arranged to thwart or discourage subsequent
+     modification by readers is not Transparent.  An image format is
+     not Transparent if used for any substantial amount of text.  A
+     copy that is not "Transparent" is called "Opaque".
+
+     Examples of suitable formats for Transparent copies include plain
+     ASCII without markup, Texinfo input format, LaTeX input format,
+     SGML or XML using a publicly available DTD, and
+     standard-conforming simple HTML, PostScript or PDF designed for
+     human modification.  Examples of transparent image formats include
+     PNG, XCF and JPG.  Opaque formats include proprietary formats that
+     can be read and edited only by proprietary word processors, SGML or
+     XML for which the DTD and/or processing tools are not generally
+     available, and the machine-generated HTML, PostScript or PDF
+     produced by some word processors for output purposes only.
+
+     The "Title Page" means, for a printed book, the title page itself,
+     plus such following pages as are needed to hold, legibly, the
+     material this License requires to appear in the title page.  For
+     works in formats which do not have any title page as such, "Title
+     Page" means the text near the most prominent appearance of the
+     work's title, preceding the beginning of the body of the text.
+
+     The "publisher" means any person or entity that distributes copies
+     of the Document to the public.
+
+     A section "Entitled XYZ" means a named subunit of the Document
+     whose title either is precisely XYZ or contains XYZ in parentheses
+     following text that translates XYZ in another language.  (Here XYZ
+     stands for a specific section name mentioned below, such as
+     "Acknowledgements", "Dedications", "Endorsements", or "History".)
+     To "Preserve the Title" of such a section when you modify the
+     Document means that it remains a section "Entitled XYZ" according
+     to this definition.
+
+     The Document may include Warranty Disclaimers next to the notice
+     which states that this License applies to the Document.  These
+     Warranty Disclaimers are considered to be included by reference in
+     this License, but only as regards disclaiming warranties: any other
+     implication that these Warranty Disclaimers may have is void and
+     has no effect on the meaning of this License.
+
+  2. VERBATIM COPYING
+
+     You may copy and distribute the Document in any medium, either
+     commercially or noncommercially, provided that this License, the
+     copyright notices, and the license notice saying this License
+     applies to the Document are reproduced in all copies, and that you
+     add no other conditions whatsoever to those of this License.  You
+     may not use technical measures to obstruct or control the reading
+     or further copying of the copies you make or distribute.  However,
+     you may accept compensation in exchange for copies.  If you
+     distribute a large enough number of copies you must also follow
+     the conditions in section 3.
+
+     You may also lend copies, under the same conditions stated above,
+     and you may publicly display copies.
+
+  3. COPYING IN QUANTITY
+
+     If you publish printed copies (or copies in media that commonly
+     have printed covers) of the Document, numbering more than 100, and
+     the Document's license notice requires Cover Texts, you must
+     enclose the copies in covers that carry, clearly and legibly, all
+     these Cover Texts: Front-Cover Texts on the front cover, and
+     Back-Cover Texts on the back cover.  Both covers must also clearly
+     and legibly identify you as the publisher of these copies.  The
+     front cover must present the full title with all words of the
+     title equally prominent and visible.  You may add other material
+     on the covers in addition.  Copying with changes limited to the
+     covers, as long as they preserve the title of the Document and
+     satisfy these conditions, can be treated as verbatim copying in
+     other respects.
+
+     If the required texts for either cover are too voluminous to fit
+     legibly, you should put the first ones listed (as many as fit
+     reasonably) on the actual cover, and continue the rest onto
+     adjacent pages.
+
+     If you publish or distribute Opaque copies of the Document
+     numbering more than 100, you must either include a
+     machine-readable Transparent copy along with each Opaque copy, or
+     state in or with each Opaque copy a computer-network location from
+     which the general network-using public has access to download
+     using public-standard network protocols a complete Transparent
+     copy of the Document, free of added material.  If you use the
+     latter option, you must take reasonably prudent steps, when you
+     begin distribution of Opaque copies in quantity, to ensure that
+     this Transparent copy will remain thus accessible at the stated
+     location until at least one year after the last time you
+     distribute an Opaque copy (directly or through your agents or
+     retailers) of that edition to the public.
+
+     It is requested, but not required, that you contact the authors of
+     the Document well before redistributing any large number of
+     copies, to give them a chance to provide you with an updated
+     version of the Document.
+
+  4. MODIFICATIONS
+
+     You may copy and distribute a Modified Version of the Document
+     under the conditions of sections 2 and 3 above, provided that you
+     release the Modified Version under precisely this License, with
+     the Modified Version filling the role of the Document, thus
+     licensing distribution and modification of the Modified Version to
+     whoever possesses a copy of it.  In addition, you must do these
+     things in the Modified Version:
+
+       A. Use in the Title Page (and on the covers, if any) a title
+          distinct from that of the Document, and from those of
+          previous versions (which should, if there were any, be listed
+          in the History section of the Document).  You may use the
+          same title as a previous version if the original publisher of
+          that version gives permission.
+
+       B. List on the Title Page, as authors, one or more persons or
+          entities responsible for authorship of the modifications in
+          the Modified Version, together with at least five of the
+          principal authors of the Document (all of its principal
+          authors, if it has fewer than five), unless they release you
+          from this requirement.
+
+       C. State on the Title page the name of the publisher of the
+          Modified Version, as the publisher.
+
+       D. Preserve all the copyright notices of the Document.
+
+       E. Add an appropriate copyright notice for your modifications
+          adjacent to the other copyright notices.
+
+       F. Include, immediately after the copyright notices, a license
+          notice giving the public permission to use the Modified
+          Version under the terms of this License, in the form shown in
+          the Addendum below.
+
+       G. Preserve in that license notice the full lists of Invariant
+          Sections and required Cover Texts given in the Document's
+          license notice.
+
+       H. Include an unaltered copy of this License.
+
+       I. Preserve the section Entitled "History", Preserve its Title,
+          and add to it an item stating at least the title, year, new
+          authors, and publisher of the Modified Version as given on
+          the Title Page.  If there is no section Entitled "History" in
+          the Document, create one stating the title, year, authors,
+          and publisher of the Document as given on its Title Page,
+          then add an item describing the Modified Version as stated in
+          the previous sentence.
+
+       J. Preserve the network location, if any, given in the Document
+          for public access to a Transparent copy of the Document, and
+          likewise the network locations given in the Document for
+          previous versions it was based on.  These may be placed in
+          the "History" section.  You may omit a network location for a
+          work that was published at least four years before the
+          Document itself, or if the original publisher of the version
+          it refers to gives permission.
+
+       K. For any section Entitled "Acknowledgements" or "Dedications",
+          Preserve the Title of the section, and preserve in the
+          section all the substance and tone of each of the contributor
+          acknowledgements and/or dedications given therein.
+
+       L. Preserve all the Invariant Sections of the Document,
+          unaltered in their text and in their titles.  Section numbers
+          or the equivalent are not considered part of the section
+          titles.
+
+       M. Delete any section Entitled "Endorsements".  Such a section
+          may not be included in the Modified Version.
+
+       N. Do not retitle any existing section to be Entitled
+          "Endorsements" or to conflict in title with any Invariant
+          Section.
+
+       O. Preserve any Warranty Disclaimers.
+
+     If the Modified Version includes new front-matter sections or
+     appendices that qualify as Secondary Sections and contain no
+     material copied from the Document, you may at your option
+     designate some or all of these sections as invariant.  To do this,
+     add their titles to the list of Invariant Sections in the Modified
+     Version's license notice.  These titles must be distinct from any
+     other section titles.
+
+     You may add a section Entitled "Endorsements", provided it contains
+     nothing but endorsements of your Modified Version by various
+     parties--for example, statements of peer review or that the text
+     has been approved by an organization as the authoritative
+     definition of a standard.
+
+     You may add a passage of up to five words as a Front-Cover Text,
+     and a passage of up to 25 words as a Back-Cover Text, to the end
+     of the list of Cover Texts in the Modified Version.  Only one
+     passage of Front-Cover Text and one of Back-Cover Text may be
+     added by (or through arrangements made by) any one entity.  If the
+     Document already includes a cover text for the same cover,
+     previously added by you or by arrangement made by the same entity
+     you are acting on behalf of, you may not add another; but you may
+     replace the old one, on explicit permission from the previous
+     publisher that added the old one.
+
+     The author(s) and publisher(s) of the Document do not by this
+     License give permission to use their names for publicity for or to
+     assert or imply endorsement of any Modified Version.
+
+  5. COMBINING DOCUMENTS
+
+     You may combine the Document with other documents released under
+     this License, under the terms defined in section 4 above for
+     modified versions, provided that you include in the combination
+     all of the Invariant Sections of all of the original documents,
+     unmodified, and list them all as Invariant Sections of your
+     combined work in its license notice, and that you preserve all
+     their Warranty Disclaimers.
+
+     The combined work need only contain one copy of this License, and
+     multiple identical Invariant Sections may be replaced with a single
+     copy.  If there are multiple Invariant Sections with the same name
+     but different contents, make the title of each such section unique
+     by adding at the end of it, in parentheses, the name of the
+     original author or publisher of that section if known, or else a
+     unique number.  Make the same adjustment to the section titles in
+     the list of Invariant Sections in the license notice of the
+     combined work.
+
+     In the combination, you must combine any sections Entitled
+     "History" in the various original documents, forming one section
+     Entitled "History"; likewise combine any sections Entitled
+     "Acknowledgements", and any sections Entitled "Dedications".  You
+     must delete all sections Entitled "Endorsements."
+
+  6. COLLECTIONS OF DOCUMENTS
+
+     You may make a collection consisting of the Document and other
+     documents released under this License, and replace the individual
+     copies of this License in the various documents with a single copy
+     that is included in the collection, provided that you follow the
+     rules of this License for verbatim copying of each of the
+     documents in all other respects.
+
+     You may extract a single document from such a collection, and
+     distribute it individually under this License, provided you insert
+     a copy of this License into the extracted document, and follow
+     this License in all other respects regarding verbatim copying of
+     that document.
+
+  7. AGGREGATION WITH INDEPENDENT WORKS
+
+     A compilation of the Document or its derivatives with other
+     separate and independent documents or works, in or on a volume of
+     a storage or distribution medium, is called an "aggregate" if the
+     copyright resulting from the compilation is not used to limit the
+     legal rights of the compilation's users beyond what the individual
+     works permit.  When the Document is included in an aggregate, this
+     License does not apply to the other works in the aggregate which
+     are not themselves derivative works of the Document.
+
+     If the Cover Text requirement of section 3 is applicable to these
+     copies of the Document, then if the Document is less than one half
+     of the entire aggregate, the Document's Cover Texts may be placed
+     on covers that bracket the Document within the aggregate, or the
+     electronic equivalent of covers if the Document is in electronic
+     form.  Otherwise they must appear on printed covers that bracket
+     the whole aggregate.
+
+  8. TRANSLATION
+
+     Translation is considered a kind of modification, so you may
+     distribute translations of the Document under the terms of section
+     4.  Replacing Invariant Sections with translations requires special
+     permission from their copyright holders, but you may include
+     translations of some or all Invariant Sections in addition to the
+     original versions of these Invariant Sections.  You may include a
+     translation of this License, and all the license notices in the
+     Document, and any Warranty Disclaimers, provided that you also
+     include the original English version of this License and the
+     original versions of those notices and disclaimers.  In case of a
+     disagreement between the translation and the original version of
+     this License or a notice or disclaimer, the original version will
+     prevail.
+
+     If a section in the Document is Entitled "Acknowledgements",
+     "Dedications", or "History", the requirement (section 4) to
+     Preserve its Title (section 1) will typically require changing the
+     actual title.
+
+  9. TERMINATION
+
+     You may not copy, modify, sublicense, or distribute the Document
+     except as expressly provided under this License.  Any attempt
+     otherwise to copy, modify, sublicense, or distribute it is void,
+     and will automatically terminate your rights under this License.
+
+     However, if you cease all violation of this License, then your
+     license from a particular copyright holder is reinstated (a)
+     provisionally, unless and until the copyright holder explicitly
+     and finally terminates your license, and (b) permanently, if the
+     copyright holder fails to notify you of the violation by some
+     reasonable means prior to 60 days after the cessation.
+
+     Moreover, your license from a particular copyright holder is
+     reinstated permanently if the copyright holder notifies you of the
+     violation by some reasonable means, this is the first time you have
+     received notice of violation of this License (for any work) from
+     that copyright holder, and you cure the violation prior to 30 days
+     after your receipt of the notice.
+
+     Termination of your rights under this section does not terminate
+     the licenses of parties who have received copies or rights from
+     you under this License.  If your rights have been terminated and
+     not permanently reinstated, receipt of a copy of some or all of
+     the same material does not give you any rights to use it.
+
+ 10. FUTURE REVISIONS OF THIS LICENSE
+
+     The Free Software Foundation may publish new, revised versions of
+     the GNU Free Documentation License from time to time.  Such new
+     versions will be similar in spirit to the present version, but may
+     differ in detail to address new problems or concerns.  See
+     `http://www.gnu.org/copyleft/'.
+
+     Each version of the License is given a distinguishing version
+     number.  If the Document specifies that a particular numbered
+     version of this License "or any later version" applies to it, you
+     have the option of following the terms and conditions either of
+     that specified version or of any later version that has been
+     published (not as a draft) by the Free Software Foundation.  If
+     the Document does not specify a version number of this License,
+     you may choose any version ever published (not as a draft) by the
+     Free Software Foundation.  If the Document specifies that a proxy
+     can decide which future versions of this License can be used, that
+     proxy's public statement of acceptance of a version permanently
+     authorizes you to choose that version for the Document.
+
+ 11. RELICENSING
+
+     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
+     World Wide Web server that publishes copyrightable works and also
+     provides prominent facilities for anybody to edit those works.  A
+     public wiki that anybody can edit is an example of such a server.
+     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
+     site means any set of copyrightable works thus published on the MMC
+     site.
+
+     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
+     license published by Creative Commons Corporation, a not-for-profit
+     corporation with a principal place of business in San Francisco,
+     California, as well as future copyleft versions of that license
+     published by that same organization.
+
+     "Incorporate" means to publish or republish a Document, in whole or
+     in part, as part of another Document.
+
+     An MMC is "eligible for relicensing" if it is licensed under this
+     License, and if all works that were first published under this
+     License somewhere other than this MMC, and subsequently
+     incorporated in whole or in part into the MMC, (1) had no cover
+     texts or invariant sections, and (2) were thus incorporated prior
+     to November 1, 2008.
+
+     The operator of an MMC Site may republish an MMC contained in the
+     site under CC-BY-SA on the same site at any time before August 1,
+     2009, provided the MMC is eligible for relicensing.
+
+
+ADDENDUM: How to use this License for your documents
+====================================================
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+       Copyright (C)  YEAR  YOUR NAME.
+       Permission is granted to copy, distribute and/or modify this document
+       under the terms of the GNU Free Documentation License, Version 1.3
+       or any later version published by the Free Software Foundation;
+       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+       Texts.  A copy of the license is included in the section entitled ``GNU
+       Free Documentation License''.
+
+   If you have Invariant Sections, Front-Cover Texts and Back-Cover
+Texts, replace the "with...Texts." line with this:
+
+         with the Invariant Sections being LIST THEIR TITLES, with
+         the Front-Cover Texts being LIST, and with the Back-Cover Texts
+         being LIST.
+
+   If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+   If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License, to
+permit their use in free software.
+
+
+
+Tag Table:
+Node: Top808
+Node: Introduction2133
+Node: Compiling4625
+Node: Executing8681
+Node: Invoking11469
+Node: Output Options12884
+Node: Analysis Options19973
+Node: Miscellaneous Options23891
+Node: Deprecated Options25146
+Node: Symspecs27215
+Node: Output29041
+Node: Flat Profile30081
+Node: Call Graph35034
+Node: Primary38266
+Node: Callers40854
+Node: Subroutines42971
+Node: Cycles44812
+Node: Line-by-line51589
+Node: Annotated Source55662
+Node: Inaccuracy58661
+Node: Sampling Error58919
+Node: Assumptions61823
+Node: How do I?63293
+Node: Incompatibilities64847
+Node: Details66341
+Node: Implementation66734
+Node: File Format72631
+Node: Internals76921
+Node: Debugging85416
+Node: GNU Free Documentation License87017
+
+End Tag Table
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/ld.info b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/ld.info
new file mode 100644
index 0000000..aaa8bbf
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/info/ld.info
Binary files differ
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-addr2line.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-addr2line.1
new file mode 100644
index 0000000..97464d6
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-addr2line.1
@@ -0,0 +1,311 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "ADDR2LINE 1"
+.TH ADDR2LINE 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+addr2line \- convert addresses into file names and line numbers.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+addr2line [\fB\-a\fR|\fB\-\-addresses\fR]
+          [\fB\-b\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR]
+          [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]]
+          [\fB\-e\fR \fIfilename\fR|\fB\-\-exe=\fR\fIfilename\fR]
+          [\fB\-f\fR|\fB\-\-functions\fR] [\fB\-s\fR|\fB\-\-basename\fR]
+          [\fB\-i\fR|\fB\-\-inlines\fR]
+          [\fB\-p\fR|\fB\-\-pretty\-print\fR]
+          [\fB\-j\fR|\fB\-\-section=\fR\fIname\fR]
+          [\fB\-H\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR]
+          [addr addr ...]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBaddr2line\fR translates addresses into file names and line numbers.
+Given an address in an executable or an offset in a section of a relocatable
+object, it uses the debugging information to figure out which file name and
+line number are associated with it.
+.PP
+The executable or relocatable object to use is specified with the \fB\-e\fR
+option.  The default is the file \fIa.out\fR.  The section in the relocatable
+object to use is specified with the \fB\-j\fR option.
+.PP
+\&\fBaddr2line\fR has two modes of operation.
+.PP
+In the first, hexadecimal addresses are specified on the command line,
+and \fBaddr2line\fR displays the file name and line number for each
+address.
+.PP
+In the second, \fBaddr2line\fR reads hexadecimal addresses from
+standard input, and prints the file name and line number for each
+address on standard output.  In this mode, \fBaddr2line\fR may be used
+in a pipe to convert dynamically chosen addresses.
+.PP
+The format of the output is \fB\s-1FILENAME:LINENO\s0\fR.  By default
+each input address generates one line of output.
+.PP
+Two options can generate additional lines before each
+\&\fB\s-1FILENAME:LINENO\s0\fR line (in that order).
+.PP
+If the \fB\-a\fR option is used then a line with the input address
+is displayed.
+.PP
+If the \fB\-f\fR option is used, then a line with the
+\&\fB\s-1FUNCTIONNAME\s0\fR is displayed.  This is the name of the function
+containing the address.
+.PP
+One option can generate additional lines after the
+\&\fB\s-1FILENAME:LINENO\s0\fR line.
+.PP
+If the \fB\-i\fR option is used and the code at the given address is
+present there because of inlining by the compiler then additional
+lines are displayed afterwards.  One or two extra lines (if the
+\&\fB\-f\fR option is used) are displayed for each inlined function.
+.PP
+Alternatively if the \fB\-p\fR option is used then each input
+address generates a single, long, output line containing the address,
+the function name, the file name and the line number.  If the
+\&\fB\-i\fR option has also been used then any inlined functions will
+be displayed in the same manner, but on separate lines, and prefixed
+by the text \fB(inlined by)\fR.
+.PP
+If the file name or function name can not be determined,
+\&\fBaddr2line\fR will print two question marks in their place.  If the
+line number can not be determined, \fBaddr2line\fR will print 0.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The long and short forms of options, shown here as alternatives, are
+equivalent.
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-addresses\fR" 4
+.IX Item "--addresses"
+.PD
+Display the address before the function name, file and line number
+information.  The address is printed with a \fB0x\fR prefix to easily
+identify it.
+.IP "\fB\-b\fR \fIbfdname\fR" 4
+.IX Item "-b bfdname"
+.PD 0
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+.PD
+Specify that the object-code format for the object files is
+\&\fIbfdname\fR.
+.IP "\fB\-C\fR" 4
+.IX Item "-C"
+.PD 0
+.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4
+.IX Item "--demangle[=style]"
+.PD
+Decode (\fIdemangle\fR) low-level symbol names into user-level names.
+Besides removing any initial underscore prepended by the system, this
+makes \*(C+ function names readable.  Different compilers have different
+mangling styles. The optional demangling style argument can be used to
+choose an appropriate demangling style for your compiler.
+.IP "\fB\-e\fR \fIfilename\fR" 4
+.IX Item "-e filename"
+.PD 0
+.IP "\fB\-\-exe=\fR\fIfilename\fR" 4
+.IX Item "--exe=filename"
+.PD
+Specify the name of the executable for which addresses should be
+translated.  The default file is \fIa.out\fR.
+.IP "\fB\-f\fR" 4
+.IX Item "-f"
+.PD 0
+.IP "\fB\-\-functions\fR" 4
+.IX Item "--functions"
+.PD
+Display function names as well as file and line number information.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-basenames\fR" 4
+.IX Item "--basenames"
+.PD
+Display only the base of each file name.
+.IP "\fB\-i\fR" 4
+.IX Item "-i"
+.PD 0
+.IP "\fB\-\-inlines\fR" 4
+.IX Item "--inlines"
+.PD
+If the address belongs to a function that was inlined, the source
+information for all enclosing scopes back to the first non-inlined
+function will also be printed.  For example, if \f(CW\*(C`main\*(C'\fR inlines
+\&\f(CW\*(C`callee1\*(C'\fR which inlines \f(CW\*(C`callee2\*(C'\fR, and address is from
+\&\f(CW\*(C`callee2\*(C'\fR, the source information for \f(CW\*(C`callee1\*(C'\fR and \f(CW\*(C`main\*(C'\fR
+will also be printed.
+.IP "\fB\-j\fR" 4
+.IX Item "-j"
+.PD 0
+.IP "\fB\-\-section\fR" 4
+.IX Item "--section"
+.PD
+Read offsets relative to the specified section instead of absolute addresses.
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-pretty\-print\fR" 4
+.IX Item "--pretty-print"
+.PD
+Make the output more human friendly: each location are printed on one line.
+If option \fB\-i\fR is specified, lines for all enclosing scopes are
+prefixed with \fB(inlined by)\fR.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ar.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ar.1
new file mode 100644
index 0000000..a699527
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ar.1
@@ -0,0 +1,466 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "AR 1"
+.TH AR 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+ar \- create, modify, and extract from archives
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+ar [\fB\-X32_64\fR] [\fB\-\fR]\fIp\fR[\fImod\fR] [\fB\-\-plugin\fR \fIname\fR] [\fB\-\-target\fR \fIbfdname\fR] [\fIrelpos\fR] [\fIcount\fR] \fIarchive\fR [\fImember\fR...]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+The \s-1GNU \s0\fBar\fR program creates, modifies, and extracts from
+archives.  An \fIarchive\fR is a single file holding a collection of
+other files in a structure that makes it possible to retrieve
+the original individual files (called \fImembers\fR of the archive).
+.PP
+The original files' contents, mode (permissions), timestamp, owner, and
+group are preserved in the archive, and can be restored on
+extraction.
+.PP
+\&\s-1GNU \s0\fBar\fR can maintain archives whose members have names of any
+length; however, depending on how \fBar\fR is configured on your
+system, a limit on member-name length may be imposed for compatibility
+with archive formats maintained with other tools.  If it exists, the
+limit is often 15 characters (typical of formats related to a.out) or 16
+characters (typical of formats related to coff).
+.PP
+\&\fBar\fR is considered a binary utility because archives of this sort
+are most often used as \fIlibraries\fR holding commonly needed
+subroutines.
+.PP
+\&\fBar\fR creates an index to the symbols defined in relocatable
+object modules in the archive when you specify the modifier \fBs\fR.
+Once created, this index is updated in the archive whenever \fBar\fR
+makes a change to its contents (save for the \fBq\fR update operation).
+An archive with such an index speeds up linking to the library, and
+allows routines in the library to call each other without regard to
+their placement in the archive.
+.PP
+You may use \fBnm \-s\fR or \fBnm \-\-print\-armap\fR to list this index
+table.  If an archive lacks the table, another form of \fBar\fR called
+\&\fBranlib\fR can be used to add just the table.
+.PP
+\&\s-1GNU \s0\fBar\fR can optionally create a \fIthin\fR archive,
+which contains a symbol index and references to the original copies
+of the member files of the archive.  This is useful for building
+libraries for use within a local build tree, where the relocatable
+objects are expected to remain available, and copying the contents of
+each object would only waste time and space.
+.PP
+An archive can either be \fIthin\fR or it can be normal.  It cannot
+be both at the same time.  Once an archive is created its format
+cannot be changed without first deleting it and then creating a new
+archive in its place.
+.PP
+Thin archives are also \fIflattened\fR, so that adding one thin
+archive to another thin archive does not nest it, as would happen with
+a normal archive.  Instead the elements of the first archive are added
+individually to the second archive.
+.PP
+The paths to the elements of the archive are stored relative to the
+archive itself.
+.PP
+\&\s-1GNU \s0\fBar\fR is designed to be compatible with two different
+facilities.  You can control its activity using command-line options,
+like the different varieties of \fBar\fR on Unix systems; or, if you
+specify the single command-line option \fB\-M\fR, you can control it
+with a script supplied via standard input, like the \s-1MRI \s0\*(L"librarian\*(R"
+program.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+\&\s-1GNU \s0\fBar\fR allows you to mix the operation code \fIp\fR and modifier
+flags \fImod\fR in any order, within the first command-line argument.
+.PP
+If you wish, you may begin the first command-line argument with a
+dash.
+.PP
+The \fIp\fR keyletter specifies what operation to execute; it may be
+any of the following, but you must specify only one of them:
+.IP "\fBd\fR" 4
+.IX Item "d"
+\&\fIDelete\fR modules from the archive.  Specify the names of modules to
+be deleted as \fImember\fR...; the archive is untouched if you
+specify no files to delete.
+.Sp
+If you specify the \fBv\fR modifier, \fBar\fR lists each module
+as it is deleted.
+.IP "\fBm\fR" 4
+.IX Item "m"
+Use this operation to \fImove\fR members in an archive.
+.Sp
+The ordering of members in an archive can make a difference in how
+programs are linked using the library, if a symbol is defined in more
+than one member.
+.Sp
+If no modifiers are used with \f(CW\*(C`m\*(C'\fR, any members you name in the
+\&\fImember\fR arguments are moved to the \fIend\fR of the archive;
+you can use the \fBa\fR, \fBb\fR, or \fBi\fR modifiers to move them to a
+specified place instead.
+.IP "\fBp\fR" 4
+.IX Item "p"
+\&\fIPrint\fR the specified members of the archive, to the standard
+output file.  If the \fBv\fR modifier is specified, show the member
+name before copying its contents to standard output.
+.Sp
+If you specify no \fImember\fR arguments, all the files in the archive are
+printed.
+.IP "\fBq\fR" 4
+.IX Item "q"
+\&\fIQuick append\fR; Historically, add the files \fImember\fR... to the end of
+\&\fIarchive\fR, without checking for replacement.
+.Sp
+The modifiers \fBa\fR, \fBb\fR, and \fBi\fR do \fInot\fR affect this
+operation; new members are always placed at the end of the archive.
+.Sp
+The modifier \fBv\fR makes \fBar\fR list each file as it is appended.
+.Sp
+Since the point of this operation is speed, implementations of
+\&\fBar\fR have the option of not updating the archive's symbol
+table if one exists.  Too many different systems however assume that
+symbol tables are always up-to-date, so \s-1GNU \s0\fBar\fR will
+rebuild the table even with a quick append.
+.Sp
+Note \- \s-1GNU \s0\fBar\fR treats the command \fBqs\fR as a
+synonym for \fBr\fR \- replacing already existing files in the
+archive and appending new ones at the end.
+.IP "\fBr\fR" 4
+.IX Item "r"
+Insert the files \fImember\fR... into \fIarchive\fR (with
+\&\fIreplacement\fR). This operation differs from \fBq\fR in that any
+previously existing members are deleted if their names match those being
+added.
+.Sp
+If one of the files named in \fImember\fR... does not exist, \fBar\fR
+displays an error message, and leaves undisturbed any existing members
+of the archive matching that name.
+.Sp
+By default, new members are added at the end of the file; but you may
+use one of the modifiers \fBa\fR, \fBb\fR, or \fBi\fR to request
+placement relative to some existing member.
+.Sp
+The modifier \fBv\fR used with this operation elicits a line of
+output for each file inserted, along with one of the letters \fBa\fR or
+\&\fBr\fR to indicate whether the file was appended (no old member
+deleted) or replaced.
+.IP "\fBs\fR" 4
+.IX Item "s"
+Add an index to the archive, or update it if it already exists.  Note
+this command is an exception to the rule that there can only be one
+command letter, as it is possible to use it as either a command or a
+modifier.  In either case it does the same thing.
+.IP "\fBt\fR" 4
+.IX Item "t"
+Display a \fItable\fR listing the contents of \fIarchive\fR, or those
+of the files listed in \fImember\fR... that are present in the
+archive.  Normally only the member name is shown; if you also want to
+see the modes (permissions), timestamp, owner, group, and size, you can
+request that by also specifying the \fBv\fR modifier.
+.Sp
+If you do not specify a \fImember\fR, all files in the archive
+are listed.
+.Sp
+If there is more than one file with the same name (say, \fBfie\fR) in
+an archive (say \fBb.a\fR), \fBar t b.a fie\fR lists only the
+first instance; to see them all, you must ask for a complete
+listing\-\-\-in our example, \fBar t b.a\fR.
+.IP "\fBx\fR" 4
+.IX Item "x"
+\&\fIExtract\fR members (named \fImember\fR) from the archive.  You can
+use the \fBv\fR modifier with this operation, to request that
+\&\fBar\fR list each name as it extracts it.
+.Sp
+If you do not specify a \fImember\fR, all files in the archive
+are extracted.
+.Sp
+Files cannot be extracted from a thin archive.
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Displays the list of command line options supported by \fBar\fR
+and then exits.
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+Displays the version information of \fBar\fR and then exits.
+.PP
+A number of modifiers (\fImod\fR) may immediately follow the \fIp\fR
+keyletter, to specify variations on an operation's behavior:
+.IP "\fBa\fR" 4
+.IX Item "a"
+Add new files \fIafter\fR an existing member of the
+archive.  If you use the modifier \fBa\fR, the name of an existing archive
+member must be present as the \fIrelpos\fR argument, before the
+\&\fIarchive\fR specification.
+.IP "\fBb\fR" 4
+.IX Item "b"
+Add new files \fIbefore\fR an existing member of the
+archive.  If you use the modifier \fBb\fR, the name of an existing archive
+member must be present as the \fIrelpos\fR argument, before the
+\&\fIarchive\fR specification.  (same as \fBi\fR).
+.IP "\fBc\fR" 4
+.IX Item "c"
+\&\fICreate\fR the archive.  The specified \fIarchive\fR is always
+created if it did not exist, when you request an update.  But a warning is
+issued unless you specify in advance that you expect to create it, by
+using this modifier.
+.IP "\fBD\fR" 4
+.IX Item "D"
+Operate in \fIdeterministic\fR mode.  When adding files and the archive
+index use zero for UIDs, GIDs, timestamps, and use consistent file modes
+for all files.  When this option is used, if \fBar\fR is used with
+identical options and identical input files, multiple runs will create
+identical output files regardless of the input files' owners, groups,
+file modes, or modification times.
+.Sp
+If \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR, then this mode is on by default.
+It can be disabled with the \fBU\fR modifier, below.
+.IP "\fBf\fR" 4
+.IX Item "f"
+Truncate names in the archive.  \s-1GNU \s0\fBar\fR will normally permit file
+names of any length.  This will cause it to create archives which are
+not compatible with the native \fBar\fR program on some systems.  If
+this is a concern, the \fBf\fR modifier may be used to truncate file
+names when putting them in the archive.
+.IP "\fBi\fR" 4
+.IX Item "i"
+Insert new files \fIbefore\fR an existing member of the
+archive.  If you use the modifier \fBi\fR, the name of an existing archive
+member must be present as the \fIrelpos\fR argument, before the
+\&\fIarchive\fR specification.  (same as \fBb\fR).
+.IP "\fBl\fR" 4
+.IX Item "l"
+This modifier is accepted but not used.
+.IP "\fBN\fR" 4
+.IX Item "N"
+Uses the \fIcount\fR parameter.  This is used if there are multiple
+entries in the archive with the same name.  Extract or delete instance
+\&\fIcount\fR of the given name from the archive.
+.IP "\fBo\fR" 4
+.IX Item "o"
+Preserve the \fIoriginal\fR dates of members when extracting them.  If
+you do not specify this modifier, files extracted from the archive
+are stamped with the time of extraction.
+.IP "\fBP\fR" 4
+.IX Item "P"
+Use the full path name when matching names in the archive.  \s-1GNU
+\&\s0\fBar\fR can not create an archive with a full path name (such archives
+are not \s-1POSIX\s0 complaint), but other archive creators can.  This option
+will cause \s-1GNU \s0\fBar\fR to match file names using a complete path
+name, which can be convenient when extracting a single file from an
+archive created by another tool.
+.IP "\fBs\fR" 4
+.IX Item "s"
+Write an object-file index into the archive, or update an existing one,
+even if no other change is made to the archive.  You may use this modifier
+flag either with any operation, or alone.  Running \fBar s\fR on an
+archive is equivalent to running \fBranlib\fR on it.
+.IP "\fBS\fR" 4
+.IX Item "S"
+Do not generate an archive symbol table.  This can speed up building a
+large library in several steps.  The resulting archive can not be used
+with the linker.  In order to build a symbol table, you must omit the
+\&\fBS\fR modifier on the last execution of \fBar\fR, or you must run
+\&\fBranlib\fR on the archive.
+.IP "\fBT\fR" 4
+.IX Item "T"
+Make the specified \fIarchive\fR a \fIthin\fR archive.  If it already
+exists and is a regular archive, the existing members must be present
+in the same directory as \fIarchive\fR.
+.IP "\fBu\fR" 4
+.IX Item "u"
+Normally, \fBar r\fR... inserts all files
+listed into the archive.  If you would like to insert \fIonly\fR those
+of the files you list that are newer than existing members of the same
+names, use this modifier.  The \fBu\fR modifier is allowed only for the
+operation \fBr\fR (replace).  In particular, the combination \fBqu\fR is
+not allowed, since checking the timestamps would lose any speed
+advantage from the operation \fBq\fR.
+.IP "\fBU\fR" 4
+.IX Item "U"
+Do \fInot\fR operate in \fIdeterministic\fR mode.  This is the inverse
+of the \fBD\fR modifier, above: added files and the archive index will
+get their actual \s-1UID, GID,\s0 timestamp, and file mode values.
+.Sp
+This is the default unless \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR.
+.IP "\fBv\fR" 4
+.IX Item "v"
+This modifier requests the \fIverbose\fR version of an operation.  Many
+operations display additional information, such as filenames processed,
+when the modifier \fBv\fR is appended.
+.IP "\fBV\fR" 4
+.IX Item "V"
+This modifier shows the version number of \fBar\fR.
+.PP
+\&\fBar\fR ignores an initial option spelt \fB\-X32_64\fR, for
+compatibility with \s-1AIX. \s0 The behaviour produced by this option is the
+default for \s-1GNU \s0\fBar\fR.  \fBar\fR does not support any of the other
+\&\fB\-X\fR options; in particular, it does not support \fB\-X32\fR
+which is the default for \s-1AIX \s0\fBar\fR.
+.PP
+The optional command line switch \fB\-\-plugin\fR \fIname\fR causes
+\&\fBar\fR to load the plugin called \fIname\fR which adds support
+for more file formats.  This option is only available if the toolchain
+has been built with plugin support enabled.
+.PP
+The optional command line switch \fB\-\-target\fR \fIbfdname\fR
+specifies that the archive members are in an object code format
+different from your system's default format.  See
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fInm\fR\|(1), \fIranlib\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-as.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-as.1
new file mode 100644
index 0000000..ed0a880
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-as.1
@@ -0,0 +1,2034 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "AS 1"
+.TH AS 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+AS \- the portable GNU assembler.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+as [\fB\-a\fR[\fBcdghlns\fR][=\fIfile\fR]] [\fB\-\-alternate\fR] [\fB\-D\fR]
+ [\fB\-\-compress\-debug\-sections\fR]  [\fB\-\-nocompress\-debug\-sections\fR]
+ [\fB\-\-debug\-prefix\-map\fR \fIold\fR=\fInew\fR]
+ [\fB\-\-defsym\fR \fIsym\fR=\fIval\fR] [\fB\-f\fR] [\fB\-g\fR] [\fB\-\-gstabs\fR]
+ [\fB\-\-gstabs+\fR] [\fB\-\-gdwarf\-2\fR] [\fB\-\-gdwarf\-sections\fR]
+ [\fB\-\-help\fR] [\fB\-I\fR \fIdir\fR] [\fB\-J\fR]
+ [\fB\-K\fR] [\fB\-L\fR] [\fB\-\-listing\-lhs\-width\fR=\fI\s-1NUM\s0\fR]
+ [\fB\-\-listing\-lhs\-width2\fR=\fI\s-1NUM\s0\fR] [\fB\-\-listing\-rhs\-width\fR=\fI\s-1NUM\s0\fR]
+ [\fB\-\-listing\-cont\-lines\fR=\fI\s-1NUM\s0\fR] [\fB\-\-keep\-locals\fR]
+ [\fB\-\-no\-pad\-sections\fR]
+ [\fB\-o\fR \fIobjfile\fR] [\fB\-R\fR]
+ [\fB\-\-hash\-size\fR=\fI\s-1NUM\s0\fR] [\fB\-\-reduce\-memory\-overheads\fR]
+ [\fB\-\-statistics\fR]
+ [\fB\-v\fR] [\fB\-version\fR] [\fB\-\-version\fR]
+ [\fB\-W\fR] [\fB\-\-warn\fR] [\fB\-\-fatal\-warnings\fR] [\fB\-w\fR] [\fB\-x\fR]
+ [\fB\-Z\fR] [\fB@\fR\fI\s-1FILE\s0\fR]
+ [\fB\-\-sectname\-subst\fR] [\fB\-\-size\-check=[error|warning]\fR]
+ [\fB\-\-elf\-stt\-common=[no|yes]\fR]
+ [\fB\-\-target\-help\fR] [\fItarget-options\fR]
+ [\fB\-\-\fR|\fIfiles\fR ...]
+.SH "TARGET"
+.IX Header "TARGET"
+\&\fITarget AArch64 options:\fR
+   [\fB\-EB\fR|\fB\-EL\fR]
+   [\fB\-mabi\fR=\fI\s-1ABI\s0\fR]
+.PP
+\&\fITarget Alpha options:\fR
+   [\fB\-m\fR\fIcpu\fR]
+   [\fB\-mdebug\fR | \fB\-no\-mdebug\fR]
+   [\fB\-replace\fR | \fB\-noreplace\fR]
+   [\fB\-relax\fR] [\fB\-g\fR] [\fB\-G\fR\fIsize\fR]
+   [\fB\-F\fR] [\fB\-32addr\fR]
+.PP
+\&\fITarget \s-1ARC\s0 options:\fR
+   [\fB\-mcpu=\fR\fIcpu\fR]
+   [\fB\-mA6\fR|\fB\-mARC600\fR|\fB\-mARC601\fR|\fB\-mA7\fR|\fB\-mARC700\fR|\fB\-mEM\fR|\fB\-mHS\fR]
+   [\fB\-mcode\-density\fR]
+   [\fB\-mrelax\fR]
+   [\fB\-EB\fR|\fB\-EL\fR]
+.PP
+\&\fITarget \s-1ARM\s0 options:\fR
+   [\fB\-mcpu\fR=\fIprocessor\fR[+\fIextension\fR...]]
+   [\fB\-march\fR=\fIarchitecture\fR[+\fIextension\fR...]]
+   [\fB\-mfpu\fR=\fIfloating-point-format\fR]
+   [\fB\-mfloat\-abi\fR=\fIabi\fR]
+   [\fB\-meabi\fR=\fIver\fR]
+   [\fB\-mthumb\fR]
+   [\fB\-EB\fR|\fB\-EL\fR]
+   [\fB\-mapcs\-32\fR|\fB\-mapcs\-26\fR|\fB\-mapcs\-float\fR|
+    \fB\-mapcs\-reentrant\fR]
+   [\fB\-mthumb\-interwork\fR] [\fB\-k\fR]
+.PP
+\&\fITarget Blackfin options:\fR
+   [\fB\-mcpu\fR=\fIprocessor\fR[\-\fIsirevision\fR]]
+   [\fB\-mfdpic\fR]
+   [\fB\-mno\-fdpic\fR]
+   [\fB\-mnopic\fR]
+.PP
+\&\fITarget \s-1CRIS\s0 options:\fR
+   [\fB\-\-underscore\fR | \fB\-\-no\-underscore\fR]
+   [\fB\-\-pic\fR] [\fB\-N\fR]
+   [\fB\-\-emulation=criself\fR | \fB\-\-emulation=crisaout\fR]
+   [\fB\-\-march=v0_v10\fR | \fB\-\-march=v10\fR | \fB\-\-march=v32\fR | \fB\-\-march=common_v10_v32\fR]
+.PP
+\&\fITarget D10V options:\fR
+   [\fB\-O\fR]
+.PP
+\&\fITarget D30V options:\fR
+   [\fB\-O\fR|\fB\-n\fR|\fB\-N\fR]
+.PP
+\&\fITarget \s-1EPIPHANY\s0 options:\fR
+   [\fB\-mepiphany\fR|\fB\-mepiphany16\fR]
+.PP
+\&\fITarget H8/300 options:\fR
+   [\-h\-tick\-hex]
+.PP
+\&\fITarget i386 options:\fR
+   [\fB\-\-32\fR|\fB\-\-x32\fR|\fB\-\-64\fR] [\fB\-n\fR]
+   [\fB\-march\fR=\fI\s-1CPU\s0\fR[+\fI\s-1EXTENSION\s0\fR...]] [\fB\-mtune\fR=\fI\s-1CPU\s0\fR]
+.PP
+\&\fITarget i960 options:\fR
+   [\fB\-ACA\fR|\fB\-ACA_A\fR|\fB\-ACB\fR|\fB\-ACC\fR|\fB\-AKA\fR|\fB\-AKB\fR|
+    \fB\-AKC\fR|\fB\-AMC\fR]
+   [\fB\-b\fR] [\fB\-no\-relax\fR]
+.PP
+\&\fITarget \s-1IA\-64\s0 options:\fR
+   [\fB\-mconstant\-gp\fR|\fB\-mauto\-pic\fR]
+   [\fB\-milp32\fR|\fB\-milp64\fR|\fB\-mlp64\fR|\fB\-mp64\fR]
+   [\fB\-mle\fR|\fBmbe\fR]
+   [\fB\-mtune=itanium1\fR|\fB\-mtune=itanium2\fR]
+   [\fB\-munwind\-check=warning\fR|\fB\-munwind\-check=error\fR]
+   [\fB\-mhint.b=ok\fR|\fB\-mhint.b=warning\fR|\fB\-mhint.b=error\fR]
+   [\fB\-x\fR|\fB\-xexplicit\fR] [\fB\-xauto\fR] [\fB\-xdebug\fR]
+.PP
+\&\fITarget \s-1IP2K\s0 options:\fR
+   [\fB\-mip2022\fR|\fB\-mip2022ext\fR]
+.PP
+\&\fITarget M32C options:\fR
+   [\fB\-m32c\fR|\fB\-m16c\fR] [\-relax] [\-h\-tick\-hex]
+.PP
+\&\fITarget M32R options:\fR
+   [\fB\-\-m32rx\fR|\fB\-\-[no\-]warn\-explicit\-parallel\-conflicts\fR|
+   \fB\-\-W[n]p\fR]
+.PP
+\&\fITarget M680X0 options:\fR
+   [\fB\-l\fR] [\fB\-m68000\fR|\fB\-m68010\fR|\fB\-m68020\fR|...]
+.PP
+\&\fITarget M68HC11 options:\fR
+   [\fB\-m68hc11\fR|\fB\-m68hc12\fR|\fB\-m68hcs12\fR|\fB\-mm9s12x\fR|\fB\-mm9s12xg\fR]
+   [\fB\-mshort\fR|\fB\-mlong\fR]
+   [\fB\-mshort\-double\fR|\fB\-mlong\-double\fR]
+   [\fB\-\-force\-long\-branches\fR] [\fB\-\-short\-branches\fR]
+   [\fB\-\-strict\-direct\-mode\fR] [\fB\-\-print\-insn\-syntax\fR]
+   [\fB\-\-print\-opcodes\fR] [\fB\-\-generate\-example\fR]
+.PP
+\&\fITarget \s-1MCORE\s0 options:\fR
+   [\fB\-jsri2bsr\fR] [\fB\-sifilter\fR] [\fB\-relax\fR]
+   [\fB\-mcpu=[210|340]\fR]
+.PP
+\&\fITarget Meta options:\fR
+   [\fB\-mcpu=\fR\fIcpu\fR] [\fB\-mfpu=\fR\fIcpu\fR] [\fB\-mdsp=\fR\fIcpu\fR]
+\&\fITarget \s-1MICROBLAZE\s0 options:\fR
+.PP
+\&\fITarget \s-1MIPS\s0 options:\fR
+   [\fB\-nocpp\fR] [\fB\-EL\fR] [\fB\-EB\fR] [\fB\-O\fR[\fIoptimization level\fR]]
+   [\fB\-g\fR[\fIdebug level\fR]] [\fB\-G\fR \fInum\fR] [\fB\-KPIC\fR] [\fB\-call_shared\fR]
+   [\fB\-non_shared\fR] [\fB\-xgot\fR [\fB\-mvxworks\-pic\fR]
+   [\fB\-mabi\fR=\fI\s-1ABI\s0\fR] [\fB\-32\fR] [\fB\-n32\fR] [\fB\-64\fR] [\fB\-mfp32\fR] [\fB\-mgp32\fR]
+   [\fB\-mfp64\fR] [\fB\-mgp64\fR] [\fB\-mfpxx\fR]
+   [\fB\-modd\-spreg\fR] [\fB\-mno\-odd\-spreg\fR]
+   [\fB\-march\fR=\fI\s-1CPU\s0\fR] [\fB\-mtune\fR=\fI\s-1CPU\s0\fR] [\fB\-mips1\fR] [\fB\-mips2\fR]
+   [\fB\-mips3\fR] [\fB\-mips4\fR] [\fB\-mips5\fR] [\fB\-mips32\fR] [\fB\-mips32r2\fR]
+   [\fB\-mips32r3\fR] [\fB\-mips32r5\fR] [\fB\-mips32r6\fR] [\fB\-mips64\fR] [\fB\-mips64r2\fR]
+   [\fB\-mips64r3\fR] [\fB\-mips64r5\fR] [\fB\-mips64r6\fR]
+   [\fB\-construct\-floats\fR] [\fB\-no\-construct\-floats\fR]
+   [\fB\-mnan=\fR\fIencoding\fR]
+   [\fB\-trap\fR] [\fB\-no\-break\fR] [\fB\-break\fR] [\fB\-no\-trap\fR]
+   [\fB\-mips16\fR] [\fB\-no\-mips16\fR]
+   [\fB\-mmicromips\fR] [\fB\-mno\-micromips\fR]
+   [\fB\-msmartmips\fR] [\fB\-mno\-smartmips\fR]
+   [\fB\-mips3d\fR] [\fB\-no\-mips3d\fR]
+   [\fB\-mdmx\fR] [\fB\-no\-mdmx\fR]
+   [\fB\-mdsp\fR] [\fB\-mno\-dsp\fR]
+   [\fB\-mdspr2\fR] [\fB\-mno\-dspr2\fR]
+   [\fB\-mdspr3\fR] [\fB\-mno\-dspr3\fR]
+   [\fB\-mmsa\fR] [\fB\-mno\-msa\fR]
+   [\fB\-mxpa\fR] [\fB\-mno\-xpa\fR]
+   [\fB\-mmt\fR] [\fB\-mno\-mt\fR]
+   [\fB\-mmcu\fR] [\fB\-mno\-mcu\fR]
+   [\fB\-minsn32\fR] [\fB\-mno\-insn32\fR]
+   [\fB\-mfix7000\fR] [\fB\-mno\-fix7000\fR]
+   [\fB\-mfix\-rm7000\fR] [\fB\-mno\-fix\-rm7000\fR]
+   [\fB\-mfix\-vr4120\fR] [\fB\-mno\-fix\-vr4120\fR]
+   [\fB\-mfix\-vr4130\fR] [\fB\-mno\-fix\-vr4130\fR]
+   [\fB\-mdebug\fR] [\fB\-no\-mdebug\fR]
+   [\fB\-mpdr\fR] [\fB\-mno\-pdr\fR]
+.PP
+\&\fITarget \s-1MMIX\s0 options:\fR
+   [\fB\-\-fixed\-special\-register\-names\fR] [\fB\-\-globalize\-symbols\fR]
+   [\fB\-\-gnu\-syntax\fR] [\fB\-\-relax\fR] [\fB\-\-no\-predefined\-symbols\fR]
+   [\fB\-\-no\-expand\fR] [\fB\-\-no\-merge\-gregs\fR] [\fB\-x\fR]
+   [\fB\-\-linker\-allocated\-gregs\fR]
+.PP
+\&\fITarget Nios \s-1II\s0 options:\fR
+   [\fB\-relax\-all\fR] [\fB\-relax\-section\fR] [\fB\-no\-relax\fR]
+   [\fB\-EB\fR] [\fB\-EL\fR]
+.PP
+\&\fITarget \s-1NDS32\s0 options:\fR
+    [\fB\-EL\fR] [\fB\-EB\fR] [\fB\-O\fR] [\fB\-Os\fR] [\fB\-mcpu=\fR\fIcpu\fR]
+    [\fB\-misa=\fR\fIisa\fR] [\fB\-mabi=\fR\fIabi\fR] [\fB\-mall\-ext\fR]
+    [\fB\-m[no\-]16\-bit\fR]  [\fB\-m[no\-]perf\-ext\fR] [\fB\-m[no\-]perf2\-ext\fR]
+    [\fB\-m[no\-]string\-ext\fR] [\fB\-m[no\-]dsp\-ext\fR] [\fB\-m[no\-]mac\fR] [\fB\-m[no\-]div\fR]
+    [\fB\-m[no\-]audio\-isa\-ext\fR] [\fB\-m[no\-]fpu\-sp\-ext\fR] [\fB\-m[no\-]fpu\-dp\-ext\fR]
+    [\fB\-m[no\-]fpu\-fma\fR] [\fB\-mfpu\-freg=\fR\fI\s-1FREG\s0\fR] [\fB\-mreduced\-regs\fR]
+    [\fB\-mfull\-regs\fR] [\fB\-m[no\-]dx\-regs\fR] [\fB\-mpic\fR] [\fB\-mno\-relax\fR]
+    [\fB\-mb2bb\fR]
+.PP
+\&\fITarget \s-1PDP11\s0 options:\fR
+   [\fB\-mpic\fR|\fB\-mno\-pic\fR] [\fB\-mall\fR] [\fB\-mno\-extensions\fR]
+   [\fB\-m\fR\fIextension\fR|\fB\-mno\-\fR\fIextension\fR]
+   [\fB\-m\fR\fIcpu\fR] [\fB\-m\fR\fImachine\fR]
+.PP
+\&\fITarget picoJava options:\fR
+   [\fB\-mb\fR|\fB\-me\fR]
+.PP
+\&\fITarget PowerPC options:\fR
+   [\fB\-a32\fR|\fB\-a64\fR]
+   [\fB\-mpwrx\fR|\fB\-mpwr2\fR|\fB\-mpwr\fR|\fB\-m601\fR|\fB\-mppc\fR|\fB\-mppc32\fR|\fB\-m603\fR|\fB\-m604\fR|\fB\-m403\fR|\fB\-m405\fR|
+    \fB\-m440\fR|\fB\-m464\fR|\fB\-m476\fR|\fB\-m7400\fR|\fB\-m7410\fR|\fB\-m7450\fR|\fB\-m7455\fR|\fB\-m750cl\fR|\fB\-mppc64\fR|
+    \fB\-m620\fR|\fB\-me500\fR|\fB\-e500x2\fR|\fB\-me500mc\fR|\fB\-me500mc64\fR|\fB\-me5500\fR|\fB\-me6500\fR|\fB\-mppc64bridge\fR|
+    \fB\-mbooke\fR|\fB\-mpower4\fR|\fB\-mpwr4\fR|\fB\-mpower5\fR|\fB\-mpwr5\fR|\fB\-mpwr5x\fR|\fB\-mpower6\fR|\fB\-mpwr6\fR|
+    \fB\-mpower7\fR|\fB\-mpwr7\fR|\fB\-mpower8\fR|\fB\-mpwr8\fR|\fB\-mpower9\fR|\fB\-mpwr9\fR\fB\-ma2\fR|
+    \fB\-mcell\fR|\fB\-mspe\fR|\fB\-mtitan\fR|\fB\-me300\fR|\fB\-mcom\fR]
+   [\fB\-many\fR] [\fB\-maltivec\fR|\fB\-mvsx\fR|\fB\-mhtm\fR|\fB\-mvle\fR]
+   [\fB\-mregnames\fR|\fB\-mno\-regnames\fR]
+   [\fB\-mrelocatable\fR|\fB\-mrelocatable\-lib\fR|\fB\-K \s-1PIC\s0\fR] [\fB\-memb\fR]
+   [\fB\-mlittle\fR|\fB\-mlittle\-endian\fR|\fB\-le\fR|\fB\-mbig\fR|\fB\-mbig\-endian\fR|\fB\-be\fR]
+   [\fB\-msolaris\fR|\fB\-mno\-solaris\fR]
+   [\fB\-nops=\fR\fIcount\fR]
+.PP
+\&\fITarget \s-1RL78\s0 options:\fR
+   [\fB\-mg10\fR]
+   [\fB\-m32bit\-doubles\fR|\fB\-m64bit\-doubles\fR]
+.PP
+\&\fITarget \s-1RX\s0 options:\fR
+   [\fB\-mlittle\-endian\fR|\fB\-mbig\-endian\fR]
+   [\fB\-m32bit\-doubles\fR|\fB\-m64bit\-doubles\fR]
+   [\fB\-muse\-conventional\-section\-names\fR]
+   [\fB\-msmall\-data\-limit\fR]
+   [\fB\-mpid\fR]
+   [\fB\-mrelax\fR]
+   [\fB\-mint\-register=\fR\fInumber\fR]
+   [\fB\-mgcc\-abi\fR|\fB\-mrx\-abi\fR]
+.PP
+\&\fITarget s390 options:\fR
+   [\fB\-m31\fR|\fB\-m64\fR] [\fB\-mesa\fR|\fB\-mzarch\fR] [\fB\-march\fR=\fI\s-1CPU\s0\fR]
+   [\fB\-mregnames\fR|\fB\-mno\-regnames\fR]
+   [\fB\-mwarn\-areg\-zero\fR]
+.PP
+\&\fITarget \s-1SCORE\s0 options:\fR
+   [\fB\-EB\fR][\fB\-EL\fR][\fB\-FIXDD\fR][\fB\-NWARN\fR]
+   [\fB\-SCORE5\fR][\fB\-SCORE5U\fR][\fB\-SCORE7\fR][\fB\-SCORE3\fR]
+   [\fB\-march=score7\fR][\fB\-march=score3\fR]
+   [\fB\-USE_R1\fR][\fB\-KPIC\fR][\fB\-O0\fR][\fB\-G\fR \fInum\fR][\fB\-V\fR]
+.PP
+\&\fITarget \s-1SPARC\s0 options:\fR
+   [\fB\-Av6\fR|\fB\-Av7\fR|\fB\-Av8\fR|\fB\-Asparclet\fR|\fB\-Asparclite\fR
+    \fB\-Av8plus\fR|\fB\-Av8plusa\fR|\fB\-Av9\fR|\fB\-Av9a\fR]
+   [\fB\-xarch=v8plus\fR|\fB\-xarch=v8plusa\fR] [\fB\-bump\fR]
+   [\fB\-32\fR|\fB\-64\fR]
+.PP
+\&\fITarget \s-1TIC54X\s0 options:\fR
+ [\fB\-mcpu=54[123589]\fR|\fB\-mcpu=54[56]lp\fR] [\fB\-mfar\-mode\fR|\fB\-mf\fR]
+ [\fB\-merrors\-to\-file\fR \fI<filename>\fR|\fB\-me\fR \fI<filename>\fR]
+.PP
+\&\fITarget \s-1TIC6X\s0 options:\fR
+   [\fB\-march=\fR\fIarch\fR] [\fB\-mbig\-endian\fR|\fB\-mlittle\-endian\fR]
+   [\fB\-mdsbt\fR|\fB\-mno\-dsbt\fR] [\fB\-mpid=no\fR|\fB\-mpid=near\fR|\fB\-mpid=far\fR]
+   [\fB\-mpic\fR|\fB\-mno\-pic\fR]
+.PP
+\&\fITarget TILE-Gx options:\fR
+   [\fB\-m32\fR|\fB\-m64\fR][\fB\-EB\fR][\fB\-EL\fR]
+.PP
+\&\fITarget Visium options:\fR
+   [\fB\-mtune=\fR\fIarch\fR]
+.PP
+\&\fITarget Xtensa options:\fR
+ [\fB\-\-[no\-]text\-section\-literals\fR] [\fB\-\-[no\-]auto\-litpools\fR]
+ [\fB\-\-[no\-]absolute\-literals\fR]
+ [\fB\-\-[no\-]target\-align\fR] [\fB\-\-[no\-]longcalls\fR]
+ [\fB\-\-[no\-]transform\fR]
+ [\fB\-\-rename\-section\fR \fIoldname\fR=\fInewname\fR]
+ [\fB\-\-[no\-]trampolines\fR]
+.PP
+\&\fITarget Z80 options:\fR
+  [\fB\-z80\fR] [\fB\-r800\fR]
+  [ \fB\-ignore\-undocumented\-instructions\fR] [\fB\-Wnud\fR]
+  [ \fB\-ignore\-unportable\-instructions\fR] [\fB\-Wnup\fR]
+  [ \fB\-warn\-undocumented\-instructions\fR] [\fB\-Wud\fR]
+  [ \fB\-warn\-unportable\-instructions\fR] [\fB\-Wup\fR]
+  [ \fB\-forbid\-undocumented\-instructions\fR] [\fB\-Fud\fR]
+  [ \fB\-forbid\-unportable\-instructions\fR] [\fB\-Fup\fR]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\s-1GNU \s0\fBas\fR is really a family of assemblers.
+If you use (or have used) the \s-1GNU\s0 assembler on one architecture, you
+should find a fairly similar environment when you use it on another
+architecture.  Each version has much in common with the others,
+including object file formats, most assembler directives (often called
+\&\fIpseudo-ops\fR) and assembler syntax.
+.PP
+\&\fBas\fR is primarily intended to assemble the output of the
+\&\s-1GNU C\s0 compiler \f(CW\*(C`gcc\*(C'\fR for use by the linker
+\&\f(CW\*(C`ld\*(C'\fR.  Nevertheless, we've tried to make \fBas\fR
+assemble correctly everything that other assemblers for the same
+machine would assemble.
+Any exceptions are documented explicitly.
+This doesn't mean \fBas\fR always uses the same syntax as another
+assembler for the same architecture; for example, we know of several
+incompatible versions of 680x0 assembly language syntax.
+.PP
+Each time you run \fBas\fR it assembles exactly one source
+program.  The source program is made up of one or more files.
+(The standard input is also a file.)
+.PP
+You give \fBas\fR a command line that has zero or more input file
+names.  The input files are read (from left file name to right).  A
+command line argument (in any position) that has no special meaning
+is taken to be an input file name.
+.PP
+If you give \fBas\fR no file names it attempts to read one input file
+from the \fBas\fR standard input, which is normally your terminal.  You
+may have to type \fBctl-D\fR to tell \fBas\fR there is no more program
+to assemble.
+.PP
+Use \fB\-\-\fR if you need to explicitly name the standard input file
+in your command line.
+.PP
+If the source is empty, \fBas\fR produces a small, empty object
+file.
+.PP
+\&\fBas\fR may write warnings and error messages to the standard error
+file (usually your terminal).  This should not happen when  a compiler
+runs \fBas\fR automatically.  Warnings report an assumption made so
+that \fBas\fR could keep assembling a flawed program; errors report a
+grave problem that stops the assembly.
+.PP
+If you are invoking \fBas\fR via the \s-1GNU C\s0 compiler,
+you can use the \fB\-Wa\fR option to pass arguments through to the assembler.
+The assembler arguments must be separated from each other (and the \fB\-Wa\fR)
+by commas.  For example:
+.PP
+.Vb 1
+\&        gcc \-c \-g \-O \-Wa,\-alh,\-L file.c
+.Ve
+.PP
+This passes two options to the assembler: \fB\-alh\fR (emit a listing to
+standard output with high-level and assembly source) and \fB\-L\fR (retain
+local symbols in the symbol table).
+.PP
+Usually you do not need to use this \fB\-Wa\fR mechanism, since many compiler
+command-line options are automatically passed to the assembler by the compiler.
+(You can call the \s-1GNU\s0 compiler driver with the \fB\-v\fR option to see
+precisely what options it passes to each compilation pass, including the
+assembler.)
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.IP "\fB\-a[cdghlmns]\fR" 4
+.IX Item "-a[cdghlmns]"
+Turn on listings, in any of a variety of ways:
+.RS 4
+.IP "\fB\-ac\fR" 4
+.IX Item "-ac"
+omit false conditionals
+.IP "\fB\-ad\fR" 4
+.IX Item "-ad"
+omit debugging directives
+.IP "\fB\-ag\fR" 4
+.IX Item "-ag"
+include general information, like as version and options passed
+.IP "\fB\-ah\fR" 4
+.IX Item "-ah"
+include high-level source
+.IP "\fB\-al\fR" 4
+.IX Item "-al"
+include assembly
+.IP "\fB\-am\fR" 4
+.IX Item "-am"
+include macro expansions
+.IP "\fB\-an\fR" 4
+.IX Item "-an"
+omit forms processing
+.IP "\fB\-as\fR" 4
+.IX Item "-as"
+include symbols
+.IP "\fB=file\fR" 4
+.IX Item "=file"
+set the name of the listing file
+.RE
+.RS 4
+.Sp
+You may combine these options; for example, use \fB\-aln\fR for assembly
+listing without forms processing.  The \fB=file\fR option, if used, must be
+the last one.  By itself, \fB\-a\fR defaults to \fB\-ahls\fR.
+.RE
+.IP "\fB\-\-alternate\fR" 4
+.IX Item "--alternate"
+Begin in alternate macro mode.
+.IP "\fB\-\-compress\-debug\-sections\fR" 4
+.IX Item "--compress-debug-sections"
+Compress \s-1DWARF\s0 debug sections using zlib with \s-1SHF_COMPRESSED\s0 from the
+\&\s-1ELF ABI. \s0 The resulting object file may not be compatible with older
+linkers and object file utilities.  Note if compression would make a
+given section \fIlarger\fR then it is not compressed.
+.IP "\fB\-\-compress\-debug\-sections=none\fR" 4
+.IX Item "--compress-debug-sections=none"
+.PD 0
+.IP "\fB\-\-compress\-debug\-sections=zlib\fR" 4
+.IX Item "--compress-debug-sections=zlib"
+.IP "\fB\-\-compress\-debug\-sections=zlib\-gnu\fR" 4
+.IX Item "--compress-debug-sections=zlib-gnu"
+.IP "\fB\-\-compress\-debug\-sections=zlib\-gabi\fR" 4
+.IX Item "--compress-debug-sections=zlib-gabi"
+.PD
+These options control how \s-1DWARF\s0 debug sections are compressed.
+\&\fB\-\-compress\-debug\-sections=none\fR is equivalent to
+\&\fB\-\-nocompress\-debug\-sections\fR.
+\&\fB\-\-compress\-debug\-sections=zlib\fR and
+\&\fB\-\-compress\-debug\-sections=zlib\-gabi\fR are equivalent to
+\&\fB\-\-compress\-debug\-sections\fR.
+\&\fB\-\-compress\-debug\-sections=zlib\-gnu\fR compresses \s-1DWARF\s0 debug
+sections using zlib.  The debug sections are renamed to begin with
+\&\fB.zdebug\fR.  Note if compression would make a given section
+\&\fIlarger\fR then it is not compressed nor renamed.
+.IP "\fB\-\-nocompress\-debug\-sections\fR" 4
+.IX Item "--nocompress-debug-sections"
+Do not compress \s-1DWARF\s0 debug sections.  This is usually the default for all
+targets except the x86/x86_64, but a configure time option can be used to
+override this.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+Ignored.  This option is accepted for script compatibility with calls to
+other assemblers.
+.IP "\fB\-\-debug\-prefix\-map\fR \fIold\fR\fB=\fR\fInew\fR" 4
+.IX Item "--debug-prefix-map old=new"
+When assembling files in directory \fI\fIold\fI\fR, record debugging
+information describing them as in \fI\fInew\fI\fR instead.
+.IP "\fB\-\-defsym\fR \fIsym\fR\fB=\fR\fIvalue\fR" 4
+.IX Item "--defsym sym=value"
+Define the symbol \fIsym\fR to be \fIvalue\fR before assembling the input file.
+\&\fIvalue\fR must be an integer constant.  As in C, a leading \fB0x\fR
+indicates a hexadecimal value, and a leading \fB0\fR indicates an octal
+value.  The value of the symbol can be overridden inside a source file via the
+use of a \f(CW\*(C`.set\*(C'\fR pseudo-op.
+.IP "\fB\-f\fR" 4
+.IX Item "-f"
+\&\*(L"fast\*(R"\-\-\-skip whitespace and comment preprocessing (assume source is
+compiler output).
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+.PD 0
+.IP "\fB\-\-gen\-debug\fR" 4
+.IX Item "--gen-debug"
+.PD
+Generate debugging information for each assembler source line using whichever
+debug format is preferred by the target.  This currently means either \s-1STABS,
+ECOFF\s0 or \s-1DWARF2.\s0
+.IP "\fB\-\-gstabs\fR" 4
+.IX Item "--gstabs"
+Generate stabs debugging information for each assembler line.  This
+may help debugging assembler code, if the debugger can handle it.
+.IP "\fB\-\-gstabs+\fR" 4
+.IX Item "--gstabs+"
+Generate stabs debugging information for each assembler line, with \s-1GNU\s0
+extensions that probably only gdb can handle, and that could make other
+debuggers crash or refuse to read your program.  This
+may help debugging assembler code.  Currently the only \s-1GNU\s0 extension is
+the location of the current working directory at assembling time.
+.IP "\fB\-\-gdwarf\-2\fR" 4
+.IX Item "--gdwarf-2"
+Generate \s-1DWARF2\s0 debugging information for each assembler line.  This
+may help debugging assembler code, if the debugger can handle it.  Note\-\-\-this
+option is only supported by some targets, not all of them.
+.IP "\fB\-\-gdwarf\-sections\fR" 4
+.IX Item "--gdwarf-sections"
+Instead of creating a .debug_line section, create a series of
+\&.debug_line.\fIfoo\fR sections where \fIfoo\fR is the name of the
+corresponding code section.  For example a code section called \fI.text.func\fR
+will have its dwarf line number information placed into a section called
+\&\fI.debug_line.text.func\fR.  If the code section is just called \fI.text\fR
+then debug line section will still be called just \fI.debug_line\fR without any
+suffix.
+.IP "\fB\-\-size\-check=error\fR" 4
+.IX Item "--size-check=error"
+.PD 0
+.IP "\fB\-\-size\-check=warning\fR" 4
+.IX Item "--size-check=warning"
+.PD
+Issue an error or warning for invalid \s-1ELF \s0.size directive.
+.IP "\fB\-\-elf\-stt\-common=no\fR" 4
+.IX Item "--elf-stt-common=no"
+.PD 0
+.IP "\fB\-\-elf\-stt\-common=yes\fR" 4
+.IX Item "--elf-stt-common=yes"
+.PD
+These options control whether the \s-1ELF\s0 assembler should generate common
+symbols with the \f(CW\*(C`STT_COMMON\*(C'\fR type.  The default can be controlled
+by a configure option \fB\-\-enable\-elf\-stt\-common\fR.
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Print a summary of the command line options and exit.
+.IP "\fB\-\-target\-help\fR" 4
+.IX Item "--target-help"
+Print a summary of all target specific options and exit.
+.IP "\fB\-I\fR \fIdir\fR" 4
+.IX Item "-I dir"
+Add directory \fIdir\fR to the search list for \f(CW\*(C`.include\*(C'\fR directives.
+.IP "\fB\-J\fR" 4
+.IX Item "-J"
+Don't warn about signed overflow.
+.IP "\fB\-K\fR" 4
+.IX Item "-K"
+Issue warnings when difference tables altered for long displacements.
+.IP "\fB\-L\fR" 4
+.IX Item "-L"
+.PD 0
+.IP "\fB\-\-keep\-locals\fR" 4
+.IX Item "--keep-locals"
+.PD
+Keep (in the symbol table) local symbols.  These symbols start with
+system-specific local label prefixes, typically \fB.L\fR for \s-1ELF\s0 systems
+or \fBL\fR for traditional a.out systems.
+.IP "\fB\-\-listing\-lhs\-width=\fR\fInumber\fR" 4
+.IX Item "--listing-lhs-width=number"
+Set the maximum width, in words, of the output data column for an assembler
+listing to \fInumber\fR.
+.IP "\fB\-\-listing\-lhs\-width2=\fR\fInumber\fR" 4
+.IX Item "--listing-lhs-width2=number"
+Set the maximum width, in words, of the output data column for continuation
+lines in an assembler listing to \fInumber\fR.
+.IP "\fB\-\-listing\-rhs\-width=\fR\fInumber\fR" 4
+.IX Item "--listing-rhs-width=number"
+Set the maximum width of an input source line, as displayed in a listing, to
+\&\fInumber\fR bytes.
+.IP "\fB\-\-listing\-cont\-lines=\fR\fInumber\fR" 4
+.IX Item "--listing-cont-lines=number"
+Set the maximum number of lines printed in a listing for a single line of input
+to \fInumber\fR + 1.
+.IP "\fB\-\-no\-pad\-sections\fR" 4
+.IX Item "--no-pad-sections"
+Stop the assembler for padding the ends of output sections to the alignment
+of that section.  The default is to pad the sections, but this can waste space
+which might be needed on targets which have tight memory constraints.
+.IP "\fB\-o\fR \fIobjfile\fR" 4
+.IX Item "-o objfile"
+Name the object-file output from \fBas\fR \fIobjfile\fR.
+.IP "\fB\-R\fR" 4
+.IX Item "-R"
+Fold the data section into the text section.
+.IP "\fB\-\-hash\-size=\fR\fInumber\fR" 4
+.IX Item "--hash-size=number"
+Set the default size of \s-1GAS\s0's hash tables to a prime number close to
+\&\fInumber\fR.  Increasing this value can reduce the length of time it takes the
+assembler to perform its tasks, at the expense of increasing the assembler's
+memory requirements.  Similarly reducing this value can reduce the memory
+requirements at the expense of speed.
+.IP "\fB\-\-reduce\-memory\-overheads\fR" 4
+.IX Item "--reduce-memory-overheads"
+This option reduces \s-1GAS\s0's memory requirements, at the expense of making the
+assembly processes slower.  Currently this switch is a synonym for
+\&\fB\-\-hash\-size=4051\fR, but in the future it may have other effects as well.
+.IP "\fB\-\-sectname\-subst\fR" 4
+.IX Item "--sectname-subst"
+Honor substitution sequences in section names.
+.IP "\fB\-\-statistics\fR" 4
+.IX Item "--statistics"
+Print the maximum space (in bytes) and total time (in seconds) used by
+assembly.
+.IP "\fB\-\-strip\-local\-absolute\fR" 4
+.IX Item "--strip-local-absolute"
+Remove local absolute symbols from the outgoing symbol table.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-version\fR" 4
+.IX Item "-version"
+.PD
+Print the \fBas\fR version.
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+Print the \fBas\fR version and exit.
+.IP "\fB\-W\fR" 4
+.IX Item "-W"
+.PD 0
+.IP "\fB\-\-no\-warn\fR" 4
+.IX Item "--no-warn"
+.PD
+Suppress warning messages.
+.IP "\fB\-\-fatal\-warnings\fR" 4
+.IX Item "--fatal-warnings"
+Treat warnings as errors.
+.IP "\fB\-\-warn\fR" 4
+.IX Item "--warn"
+Don't suppress warning messages or treat them as errors.
+.IP "\fB\-w\fR" 4
+.IX Item "-w"
+Ignored.
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+Ignored.
+.IP "\fB\-Z\fR" 4
+.IX Item "-Z"
+Generate an object file even after errors.
+.IP "\fB\-\- |\fR \fIfiles\fR \fB...\fR" 4
+.IX Item "-- | files ..."
+Standard input, or source files to assemble.
+.PP
+The following options are available when as is configured for the
+64\-bit mode of the \s-1ARM\s0 Architecture (AArch64).
+.IP "\fB\-EB\fR" 4
+.IX Item "-EB"
+This option specifies that the output generated by the assembler should
+be marked as being encoded for a big-endian processor.
+.IP "\fB\-EL\fR" 4
+.IX Item "-EL"
+This option specifies that the output generated by the assembler should
+be marked as being encoded for a little-endian processor.
+.IP "\fB\-mabi=\fR\fIabi\fR" 4
+.IX Item "-mabi=abi"
+Specify which \s-1ABI\s0 the source code uses.  The recognized arguments
+are: \f(CW\*(C`ilp32\*(C'\fR and \f(CW\*(C`lp64\*(C'\fR, which decides the generated object
+file in \s-1ELF32\s0 and \s-1ELF64\s0 format respectively.  The default is \f(CW\*(C`lp64\*(C'\fR.
+.IP "\fB\-mcpu=\fR\fIprocessor\fR\fB[+\fR\fIextension\fR\fB...]\fR" 4
+.IX Item "-mcpu=processor[+extension...]"
+This option specifies the target processor.  The assembler will issue an error
+message if an attempt is made to assemble an instruction which will not execute
+on the target processor.  The following processor names are recognized:
+\&\f(CW\*(C`cortex\-a35\*(C'\fR,
+\&\f(CW\*(C`cortex\-a53\*(C'\fR,
+\&\f(CW\*(C`cortex\-a55\*(C'\fR,
+\&\f(CW\*(C`cortex\-a57\*(C'\fR,
+\&\f(CW\*(C`cortex\-a72\*(C'\fR,
+\&\f(CW\*(C`cortex\-a73\*(C'\fR,
+\&\f(CW\*(C`cortex\-a75\*(C'\fR,
+\&\f(CW\*(C`exynos\-m1\*(C'\fR,
+\&\f(CW\*(C`qdf24xx\*(C'\fR,
+\&\f(CW\*(C`thunderx\*(C'\fR,
+\&\f(CW\*(C`vulcan\*(C'\fR,
+\&\f(CW\*(C`xgene1\*(C'\fR
+and
+\&\f(CW\*(C`xgene2\*(C'\fR.
+The special name \f(CW\*(C`all\*(C'\fR may be used to allow the assembler to accept
+instructions valid for any supported processor, including all optional
+extensions.
+.Sp
+In addition to the basic instruction set, the assembler can be told to
+accept, or restrict, various extension mnemonics that extend the
+processor.
+.Sp
+If some implementations of a particular processor can have an
+extension, then then those extensions are automatically enabled.
+Consequently, you will not normally have to specify any additional
+extensions.
+.IP "\fB\-march=\fR\fIarchitecture\fR\fB[+\fR\fIextension\fR\fB...]\fR" 4
+.IX Item "-march=architecture[+extension...]"
+This option specifies the target architecture.  The assembler will
+issue an error message if an attempt is made to assemble an
+instruction which will not execute on the target architecture.  The
+following architecture names are recognized: \f(CW\*(C`armv8\-a\*(C'\fR,
+\&\f(CW\*(C`armv8.1\-a\*(C'\fR and \f(CW\*(C`armv8.2\-a\*(C'\fR.
+.Sp
+If both \fB\-mcpu\fR and \fB\-march\fR are specified, the
+assembler will use the setting for \fB\-mcpu\fR.  If neither are
+specified, the assembler will default to \fB\-mcpu=all\fR.
+.Sp
+The architecture option can be extended with the same instruction set
+extension options as the \fB\-mcpu\fR option.  Unlike
+\&\fB\-mcpu\fR, extensions are not always enabled by default,
+.IP "\fB\-mverbose\-error\fR" 4
+.IX Item "-mverbose-error"
+This option enables verbose error messages for AArch64 gas.  This option
+is enabled by default.
+.IP "\fB\-mno\-verbose\-error\fR" 4
+.IX Item "-mno-verbose-error"
+This option disables verbose error messages in AArch64 gas.
+.PP
+The following options are available when as is configured for an Alpha
+processor.
+.IP "\fB\-m\fR\fIcpu\fR" 4
+.IX Item "-mcpu"
+This option specifies the target processor.  If an attempt is made to
+assemble an instruction which will not execute on the target processor,
+the assembler may either expand the instruction as a macro or issue an
+error message.  This option is equivalent to the \f(CW\*(C`.arch\*(C'\fR directive.
+.Sp
+The following processor names are recognized:
+\&\f(CW21064\fR,
+\&\f(CW\*(C`21064a\*(C'\fR,
+\&\f(CW21066\fR,
+\&\f(CW21068\fR,
+\&\f(CW21164\fR,
+\&\f(CW\*(C`21164a\*(C'\fR,
+\&\f(CW\*(C`21164pc\*(C'\fR,
+\&\f(CW21264\fR,
+\&\f(CW\*(C`21264a\*(C'\fR,
+\&\f(CW\*(C`21264b\*(C'\fR,
+\&\f(CW\*(C`ev4\*(C'\fR,
+\&\f(CW\*(C`ev5\*(C'\fR,
+\&\f(CW\*(C`lca45\*(C'\fR,
+\&\f(CW\*(C`ev5\*(C'\fR,
+\&\f(CW\*(C`ev56\*(C'\fR,
+\&\f(CW\*(C`pca56\*(C'\fR,
+\&\f(CW\*(C`ev6\*(C'\fR,
+\&\f(CW\*(C`ev67\*(C'\fR,
+\&\f(CW\*(C`ev68\*(C'\fR.
+The special name \f(CW\*(C`all\*(C'\fR may be used to allow the assembler to accept
+instructions valid for any Alpha processor.
+.Sp
+In order to support existing practice in \s-1OSF/1\s0 with respect to \f(CW\*(C`.arch\*(C'\fR,
+and existing practice within \fB\s-1MILO\s0\fR (the Linux \s-1ARC\s0 bootloader), the
+numbered processor names (e.g. 21064) enable the processor-specific PALcode
+instructions, while the \*(L"electro-vlasic\*(R" names (e.g. \f(CW\*(C`ev4\*(C'\fR) do not.
+.IP "\fB\-mdebug\fR" 4
+.IX Item "-mdebug"
+.PD 0
+.IP "\fB\-no\-mdebug\fR" 4
+.IX Item "-no-mdebug"
+.PD
+Enables or disables the generation of \f(CW\*(C`.mdebug\*(C'\fR encapsulation for
+stabs directives and procedure descriptors.  The default is to automatically
+enable \f(CW\*(C`.mdebug\*(C'\fR when the first stabs directive is seen.
+.IP "\fB\-relax\fR" 4
+.IX Item "-relax"
+This option forces all relocations to be put into the object file, instead
+of saving space and resolving some relocations at assembly time.  Note that
+this option does not propagate all symbol arithmetic into the object file,
+because not all symbol arithmetic can be represented.  However, the option
+can still be useful in specific applications.
+.IP "\fB\-replace\fR" 4
+.IX Item "-replace"
+.PD 0
+.IP "\fB\-noreplace\fR" 4
+.IX Item "-noreplace"
+.PD
+Enables or disables the optimization of procedure calls, both at assemblage
+and at link time.  These options are only available for \s-1VMS\s0 targets and
+\&\f(CW\*(C`\-replace\*(C'\fR is the default.  See section 1.4.1 of the OpenVMS Linker
+Utility Manual.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+This option is used when the compiler generates debug information.  When
+\&\fBgcc\fR is using \fBmips-tfile\fR to generate debug
+information for \s-1ECOFF,\s0 local labels must be passed through to the object
+file.  Otherwise this option has no effect.
+.IP "\fB\-G\fR\fIsize\fR" 4
+.IX Item "-Gsize"
+A local common symbol larger than \fIsize\fR is placed in \f(CW\*(C`.bss\*(C'\fR,
+while smaller symbols are placed in \f(CW\*(C`.sbss\*(C'\fR.
+.IP "\fB\-F\fR" 4
+.IX Item "-F"
+.PD 0
+.IP "\fB\-32addr\fR" 4
+.IX Item "-32addr"
+.PD
+These options are ignored for backward compatibility.
+.PP
+The following options are available when as is configured for an \s-1ARC\s0
+processor.
+.IP "\fB\-mcpu=\fR\fIcpu\fR" 4
+.IX Item "-mcpu=cpu"
+This option selects the core processor variant.
+.IP "\fB\-EB | \-EL\fR" 4
+.IX Item "-EB | -EL"
+Select either big-endian (\-EB) or little-endian (\-EL) output.
+.IP "\fB\-mcode\-density\fR" 4
+.IX Item "-mcode-density"
+Enable Code Density extenssion instructions.
+.PP
+The following options are available when as is configured for the \s-1ARM\s0
+processor family.
+.IP "\fB\-mcpu=\fR\fIprocessor\fR\fB[+\fR\fIextension\fR\fB...]\fR" 4
+.IX Item "-mcpu=processor[+extension...]"
+Specify which \s-1ARM\s0 processor variant is the target.
+.IP "\fB\-march=\fR\fIarchitecture\fR\fB[+\fR\fIextension\fR\fB...]\fR" 4
+.IX Item "-march=architecture[+extension...]"
+Specify which \s-1ARM\s0 architecture variant is used by the target.
+.IP "\fB\-mfpu=\fR\fIfloating-point-format\fR" 4
+.IX Item "-mfpu=floating-point-format"
+Select which Floating Point architecture is the target.
+.IP "\fB\-mfloat\-abi=\fR\fIabi\fR" 4
+.IX Item "-mfloat-abi=abi"
+Select which floating point \s-1ABI\s0 is in use.
+.IP "\fB\-mthumb\fR" 4
+.IX Item "-mthumb"
+Enable Thumb only instruction decoding.
+.IP "\fB\-mapcs\-32 | \-mapcs\-26 | \-mapcs\-float | \-mapcs\-reentrant\fR" 4
+.IX Item "-mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant"
+Select which procedure calling convention is in use.
+.IP "\fB\-EB | \-EL\fR" 4
+.IX Item "-EB | -EL"
+Select either big-endian (\-EB) or little-endian (\-EL) output.
+.IP "\fB\-mthumb\-interwork\fR" 4
+.IX Item "-mthumb-interwork"
+Specify that the code has been generated with interworking between Thumb and
+\&\s-1ARM\s0 code in mind.
+.IP "\fB\-mccs\fR" 4
+.IX Item "-mccs"
+Turns on CodeComposer Studio assembly syntax compatibility mode.
+.IP "\fB\-k\fR" 4
+.IX Item "-k"
+Specify that \s-1PIC\s0 code has been generated.
+.PP
+The following options are available when as is configured for
+the Blackfin processor family.
+.IP "\fB\-mcpu=\fR\fIprocessor\fR[\fB\-\fR\fIsirevision\fR]" 4
+.IX Item "-mcpu=processor[-sirevision]"
+This option specifies the target processor.  The optional \fIsirevision\fR
+is not used in assembler.  It's here such that \s-1GCC\s0 can easily pass down its
+\&\f(CW\*(C`\-mcpu=\*(C'\fR option.  The assembler will issue an
+error message if an attempt is made to assemble an instruction which
+will not execute on the target processor.  The following processor names are
+recognized:
+\&\f(CW\*(C`bf504\*(C'\fR,
+\&\f(CW\*(C`bf506\*(C'\fR,
+\&\f(CW\*(C`bf512\*(C'\fR,
+\&\f(CW\*(C`bf514\*(C'\fR,
+\&\f(CW\*(C`bf516\*(C'\fR,
+\&\f(CW\*(C`bf518\*(C'\fR,
+\&\f(CW\*(C`bf522\*(C'\fR,
+\&\f(CW\*(C`bf523\*(C'\fR,
+\&\f(CW\*(C`bf524\*(C'\fR,
+\&\f(CW\*(C`bf525\*(C'\fR,
+\&\f(CW\*(C`bf526\*(C'\fR,
+\&\f(CW\*(C`bf527\*(C'\fR,
+\&\f(CW\*(C`bf531\*(C'\fR,
+\&\f(CW\*(C`bf532\*(C'\fR,
+\&\f(CW\*(C`bf533\*(C'\fR,
+\&\f(CW\*(C`bf534\*(C'\fR,
+\&\f(CW\*(C`bf535\*(C'\fR (not implemented yet),
+\&\f(CW\*(C`bf536\*(C'\fR,
+\&\f(CW\*(C`bf537\*(C'\fR,
+\&\f(CW\*(C`bf538\*(C'\fR,
+\&\f(CW\*(C`bf539\*(C'\fR,
+\&\f(CW\*(C`bf542\*(C'\fR,
+\&\f(CW\*(C`bf542m\*(C'\fR,
+\&\f(CW\*(C`bf544\*(C'\fR,
+\&\f(CW\*(C`bf544m\*(C'\fR,
+\&\f(CW\*(C`bf547\*(C'\fR,
+\&\f(CW\*(C`bf547m\*(C'\fR,
+\&\f(CW\*(C`bf548\*(C'\fR,
+\&\f(CW\*(C`bf548m\*(C'\fR,
+\&\f(CW\*(C`bf549\*(C'\fR,
+\&\f(CW\*(C`bf549m\*(C'\fR,
+\&\f(CW\*(C`bf561\*(C'\fR,
+and
+\&\f(CW\*(C`bf592\*(C'\fR.
+.IP "\fB\-mfdpic\fR" 4
+.IX Item "-mfdpic"
+Assemble for the \s-1FDPIC ABI.\s0
+.IP "\fB\-mno\-fdpic\fR" 4
+.IX Item "-mno-fdpic"
+.PD 0
+.IP "\fB\-mnopic\fR" 4
+.IX Item "-mnopic"
+.PD
+Disable \-mfdpic.
+.PP
+See the info pages for documentation of the CRIS-specific options.
+.PP
+The following options are available when as is configured for
+a D10V processor.
+.IP "\fB\-O\fR" 4
+.IX Item "-O"
+Optimize output by parallelizing instructions.
+.PP
+The following options are available when as is configured for a D30V
+processor.
+.IP "\fB\-O\fR" 4
+.IX Item "-O"
+Optimize output by parallelizing instructions.
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+Warn when nops are generated.
+.IP "\fB\-N\fR" 4
+.IX Item "-N"
+Warn when a nop after a 32\-bit multiply instruction is generated.
+.PP
+The following options are available when as is configured for
+an Epiphany processor.
+.IP "\fB\-mepiphany\fR" 4
+.IX Item "-mepiphany"
+Specifies that the both 32 and 16 bit instructions are allowed.  This is the
+default behavior.
+.IP "\fB\-mepiphany16\fR" 4
+.IX Item "-mepiphany16"
+Restricts the permitted instructions to just the 16 bit set.
+.PP
+The following options are available when as is configured for an H8/300
+processor.
+\&\f(CW@chapter\fR H8/300 Dependent Features
+.SS "Options"
+.IX Subsection "Options"
+The Renesas H8/300 version of \f(CW\*(C`as\*(C'\fR has one
+machine-dependent option:
+.IP "\fB\-h\-tick\-hex\fR" 4
+.IX Item "-h-tick-hex"
+Support H'00 style hex constants in addition to 0x00 style.
+.IP "\fB\-mach=\fR\fIname\fR" 4
+.IX Item "-mach=name"
+Sets the H8300 machine variant.  The following machine names
+are recognised:
+\&\f(CW\*(C`h8300h\*(C'\fR,
+\&\f(CW\*(C`h8300hn\*(C'\fR,
+\&\f(CW\*(C`h8300s\*(C'\fR,
+\&\f(CW\*(C`h8300sn\*(C'\fR,
+\&\f(CW\*(C`h8300sx\*(C'\fR and 
+\&\f(CW\*(C`h8300sxn\*(C'\fR.
+.PP
+The following options are available when as is configured for
+an i386 processor.
+.IP "\fB\-\-32 | \-\-x32 | \-\-64\fR" 4
+.IX Item "--32 | --x32 | --64"
+Select the word size, either 32 bits or 64 bits.  \fB\-\-32\fR
+implies Intel i386 architecture, while \fB\-\-x32\fR and \fB\-\-64\fR
+imply \s-1AMD\s0 x86\-64 architecture with 32\-bit or 64\-bit word-size
+respectively.
+.Sp
+These options are only available with the \s-1ELF\s0 object file format, and
+require that the necessary \s-1BFD\s0 support has been included (on a 32\-bit
+platform you have to add \-\-enable\-64\-bit\-bfd to configure enable 64\-bit
+usage and use x86\-64 as target platform).
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+By default, x86 \s-1GAS\s0 replaces multiple nop instructions used for
+alignment within code sections with multi-byte nop instructions such
+as leal 0(%esi,1),%esi.  This switch disables the optimization.
+.IP "\fB\-\-divide\fR" 4
+.IX Item "--divide"
+On SVR4\-derived platforms, the character \fB/\fR is treated as a comment
+character, which means that it cannot be used in expressions.  The
+\&\fB\-\-divide\fR option turns \fB/\fR into a normal character.  This does
+not disable \fB/\fR at the beginning of a line starting a comment, or
+affect using \fB#\fR for starting a comment.
+.IP "\fB\-march=\fR\fI\s-1CPU\s0\fR\fB[+\fR\fI\s-1EXTENSION\s0\fR\fB...]\fR" 4
+.IX Item "-march=CPU[+EXTENSION...]"
+This option specifies the target processor.  The assembler will
+issue an error message if an attempt is made to assemble an instruction
+which will not execute on the target processor.  The following
+processor names are recognized:
+\&\f(CW\*(C`i8086\*(C'\fR,
+\&\f(CW\*(C`i186\*(C'\fR,
+\&\f(CW\*(C`i286\*(C'\fR,
+\&\f(CW\*(C`i386\*(C'\fR,
+\&\f(CW\*(C`i486\*(C'\fR,
+\&\f(CW\*(C`i586\*(C'\fR,
+\&\f(CW\*(C`i686\*(C'\fR,
+\&\f(CW\*(C`pentium\*(C'\fR,
+\&\f(CW\*(C`pentiumpro\*(C'\fR,
+\&\f(CW\*(C`pentiumii\*(C'\fR,
+\&\f(CW\*(C`pentiumiii\*(C'\fR,
+\&\f(CW\*(C`pentium4\*(C'\fR,
+\&\f(CW\*(C`prescott\*(C'\fR,
+\&\f(CW\*(C`nocona\*(C'\fR,
+\&\f(CW\*(C`core\*(C'\fR,
+\&\f(CW\*(C`core2\*(C'\fR,
+\&\f(CW\*(C`corei7\*(C'\fR,
+\&\f(CW\*(C`l1om\*(C'\fR,
+\&\f(CW\*(C`k1om\*(C'\fR,
+\&\f(CW\*(C`iamcu\*(C'\fR,
+\&\f(CW\*(C`k6\*(C'\fR,
+\&\f(CW\*(C`k6_2\*(C'\fR,
+\&\f(CW\*(C`athlon\*(C'\fR,
+\&\f(CW\*(C`opteron\*(C'\fR,
+\&\f(CW\*(C`k8\*(C'\fR,
+\&\f(CW\*(C`amdfam10\*(C'\fR,
+\&\f(CW\*(C`bdver1\*(C'\fR,
+\&\f(CW\*(C`bdver2\*(C'\fR,
+\&\f(CW\*(C`bdver3\*(C'\fR,
+\&\f(CW\*(C`bdver4\*(C'\fR,
+\&\f(CW\*(C`znver1\*(C'\fR,
+\&\f(CW\*(C`btver1\*(C'\fR,
+\&\f(CW\*(C`btver2\*(C'\fR,
+\&\f(CW\*(C`generic32\*(C'\fR and
+\&\f(CW\*(C`generic64\*(C'\fR.
+.Sp
+In addition to the basic instruction set, the assembler can be told to
+accept various extension mnemonics.  For example,
+\&\f(CW\*(C`\-march=i686+sse4+vmx\*(C'\fR extends \fIi686\fR with \fIsse4\fR and
+\&\fIvmx\fR.  The following extensions are currently supported:
+\&\f(CW8087\fR,
+\&\f(CW287\fR,
+\&\f(CW387\fR,
+\&\f(CW687\fR,
+\&\f(CW\*(C`no87\*(C'\fR,
+\&\f(CW\*(C`no287\*(C'\fR,
+\&\f(CW\*(C`no387\*(C'\fR,
+\&\f(CW\*(C`no687\*(C'\fR,
+\&\f(CW\*(C`mmx\*(C'\fR,
+\&\f(CW\*(C`nommx\*(C'\fR,
+\&\f(CW\*(C`sse\*(C'\fR,
+\&\f(CW\*(C`sse2\*(C'\fR,
+\&\f(CW\*(C`sse3\*(C'\fR,
+\&\f(CW\*(C`ssse3\*(C'\fR,
+\&\f(CW\*(C`sse4.1\*(C'\fR,
+\&\f(CW\*(C`sse4.2\*(C'\fR,
+\&\f(CW\*(C`sse4\*(C'\fR,
+\&\f(CW\*(C`nosse\*(C'\fR,
+\&\f(CW\*(C`nosse2\*(C'\fR,
+\&\f(CW\*(C`nosse3\*(C'\fR,
+\&\f(CW\*(C`nossse3\*(C'\fR,
+\&\f(CW\*(C`nosse4.1\*(C'\fR,
+\&\f(CW\*(C`nosse4.2\*(C'\fR,
+\&\f(CW\*(C`nosse4\*(C'\fR,
+\&\f(CW\*(C`avx\*(C'\fR,
+\&\f(CW\*(C`avx2\*(C'\fR,
+\&\f(CW\*(C`noavx\*(C'\fR,
+\&\f(CW\*(C`noavx2\*(C'\fR,
+\&\f(CW\*(C`adx\*(C'\fR,
+\&\f(CW\*(C`rdseed\*(C'\fR,
+\&\f(CW\*(C`prfchw\*(C'\fR,
+\&\f(CW\*(C`smap\*(C'\fR,
+\&\f(CW\*(C`mpx\*(C'\fR,
+\&\f(CW\*(C`sha\*(C'\fR,
+\&\f(CW\*(C`rdpid\*(C'\fR,
+\&\f(CW\*(C`prefetchwt1\*(C'\fR,
+\&\f(CW\*(C`clflushopt\*(C'\fR,
+\&\f(CW\*(C`se1\*(C'\fR,
+\&\f(CW\*(C`clwb\*(C'\fR,
+\&\f(CW\*(C`pcommit\*(C'\fR,
+\&\f(CW\*(C`avx512f\*(C'\fR,
+\&\f(CW\*(C`avx512cd\*(C'\fR,
+\&\f(CW\*(C`avx512er\*(C'\fR,
+\&\f(CW\*(C`avx512pf\*(C'\fR,
+\&\f(CW\*(C`avx512vl\*(C'\fR,
+\&\f(CW\*(C`avx512bw\*(C'\fR,
+\&\f(CW\*(C`avx512dq\*(C'\fR,
+\&\f(CW\*(C`avx512ifma\*(C'\fR,
+\&\f(CW\*(C`avx512vbmi\*(C'\fR,
+\&\f(CW\*(C`noavx512f\*(C'\fR,
+\&\f(CW\*(C`noavx512cd\*(C'\fR,
+\&\f(CW\*(C`noavx512er\*(C'\fR,
+\&\f(CW\*(C`noavx512pf\*(C'\fR,
+\&\f(CW\*(C`noavx512vl\*(C'\fR,
+\&\f(CW\*(C`noavx512bw\*(C'\fR,
+\&\f(CW\*(C`noavx512dq\*(C'\fR,
+\&\f(CW\*(C`noavx512ifma\*(C'\fR,
+\&\f(CW\*(C`noavx512vbmi\*(C'\fR,
+\&\f(CW\*(C`vmx\*(C'\fR,
+\&\f(CW\*(C`vmfunc\*(C'\fR,
+\&\f(CW\*(C`smx\*(C'\fR,
+\&\f(CW\*(C`xsave\*(C'\fR,
+\&\f(CW\*(C`xsaveopt\*(C'\fR,
+\&\f(CW\*(C`xsavec\*(C'\fR,
+\&\f(CW\*(C`xsaves\*(C'\fR,
+\&\f(CW\*(C`aes\*(C'\fR,
+\&\f(CW\*(C`pclmul\*(C'\fR,
+\&\f(CW\*(C`fsgsbase\*(C'\fR,
+\&\f(CW\*(C`rdrnd\*(C'\fR,
+\&\f(CW\*(C`f16c\*(C'\fR,
+\&\f(CW\*(C`bmi2\*(C'\fR,
+\&\f(CW\*(C`fma\*(C'\fR,
+\&\f(CW\*(C`movbe\*(C'\fR,
+\&\f(CW\*(C`ept\*(C'\fR,
+\&\f(CW\*(C`lzcnt\*(C'\fR,
+\&\f(CW\*(C`hle\*(C'\fR,
+\&\f(CW\*(C`rtm\*(C'\fR,
+\&\f(CW\*(C`invpcid\*(C'\fR,
+\&\f(CW\*(C`clflush\*(C'\fR,
+\&\f(CW\*(C`mwaitx\*(C'\fR,
+\&\f(CW\*(C`clzero\*(C'\fR,
+\&\f(CW\*(C`lwp\*(C'\fR,
+\&\f(CW\*(C`fma4\*(C'\fR,
+\&\f(CW\*(C`xop\*(C'\fR,
+\&\f(CW\*(C`cx16\*(C'\fR,
+\&\f(CW\*(C`syscall\*(C'\fR,
+\&\f(CW\*(C`rdtscp\*(C'\fR,
+\&\f(CW\*(C`3dnow\*(C'\fR,
+\&\f(CW\*(C`3dnowa\*(C'\fR,
+\&\f(CW\*(C`sse4a\*(C'\fR,
+\&\f(CW\*(C`sse5\*(C'\fR,
+\&\f(CW\*(C`svme\*(C'\fR,
+\&\f(CW\*(C`abm\*(C'\fR and
+\&\f(CW\*(C`padlock\*(C'\fR.
+Note that rather than extending a basic instruction set, the extension
+mnemonics starting with \f(CW\*(C`no\*(C'\fR revoke the respective functionality.
+.Sp
+When the \f(CW\*(C`.arch\*(C'\fR directive is used with \fB\-march\fR, the
+\&\f(CW\*(C`.arch\*(C'\fR directive will take precedent.
+.IP "\fB\-mtune=\fR\fI\s-1CPU\s0\fR" 4
+.IX Item "-mtune=CPU"
+This option specifies a processor to optimize for. When used in
+conjunction with the \fB\-march\fR option, only instructions
+of the processor specified by the \fB\-march\fR option will be
+generated.
+.Sp
+Valid \fI\s-1CPU\s0\fR values are identical to the processor list of
+\&\fB\-march=\fR\fI\s-1CPU\s0\fR.
+.IP "\fB\-msse2avx\fR" 4
+.IX Item "-msse2avx"
+This option specifies that the assembler should encode \s-1SSE\s0 instructions
+with \s-1VEX\s0 prefix.
+.IP "\fB\-msse\-check=\fR\fInone\fR" 4
+.IX Item "-msse-check=none"
+.PD 0
+.IP "\fB\-msse\-check=\fR\fIwarning\fR" 4
+.IX Item "-msse-check=warning"
+.IP "\fB\-msse\-check=\fR\fIerror\fR" 4
+.IX Item "-msse-check=error"
+.PD
+These options control if the assembler should check \s-1SSE\s0 instructions.
+\&\fB\-msse\-check=\fR\fInone\fR will make the assembler not to check \s-1SSE\s0
+instructions,  which is the default.  \fB\-msse\-check=\fR\fIwarning\fR
+will make the assembler issue a warning for any \s-1SSE\s0 instruction.
+\&\fB\-msse\-check=\fR\fIerror\fR will make the assembler issue an error
+for any \s-1SSE\s0 instruction.
+.IP "\fB\-mavxscalar=\fR\fI128\fR" 4
+.IX Item "-mavxscalar=128"
+.PD 0
+.IP "\fB\-mavxscalar=\fR\fI256\fR" 4
+.IX Item "-mavxscalar=256"
+.PD
+These options control how the assembler should encode scalar \s-1AVX\s0
+instructions.  \fB\-mavxscalar=\fR\fI128\fR will encode scalar
+\&\s-1AVX\s0 instructions with 128bit vector length, which is the default.
+\&\fB\-mavxscalar=\fR\fI256\fR will encode scalar \s-1AVX\s0 instructions
+with 256bit vector length.
+.IP "\fB\-mevexlig=\fR\fI128\fR" 4
+.IX Item "-mevexlig=128"
+.PD 0
+.IP "\fB\-mevexlig=\fR\fI256\fR" 4
+.IX Item "-mevexlig=256"
+.IP "\fB\-mevexlig=\fR\fI512\fR" 4
+.IX Item "-mevexlig=512"
+.PD
+These options control how the assembler should encode length-ignored
+(\s-1LIG\s0) \s-1EVEX\s0 instructions.  \fB\-mevexlig=\fR\fI128\fR will encode \s-1LIG
+EVEX\s0 instructions with 128bit vector length, which is the default.
+\&\fB\-mevexlig=\fR\fI256\fR and \fB\-mevexlig=\fR\fI512\fR will
+encode \s-1LIG EVEX\s0 instructions with 256bit and 512bit vector length,
+respectively.
+.IP "\fB\-mevexwig=\fR\fI0\fR" 4
+.IX Item "-mevexwig=0"
+.PD 0
+.IP "\fB\-mevexwig=\fR\fI1\fR" 4
+.IX Item "-mevexwig=1"
+.PD
+These options control how the assembler should encode w\-ignored (\s-1WIG\s0)
+\&\s-1EVEX\s0 instructions.  \fB\-mevexwig=\fR\fI0\fR will encode \s-1WIG
+EVEX\s0 instructions with evex.w = 0, which is the default.
+\&\fB\-mevexwig=\fR\fI1\fR will encode \s-1WIG EVEX\s0 instructions with
+evex.w = 1.
+.IP "\fB\-mmnemonic=\fR\fIatt\fR" 4
+.IX Item "-mmnemonic=att"
+.PD 0
+.IP "\fB\-mmnemonic=\fR\fIintel\fR" 4
+.IX Item "-mmnemonic=intel"
+.PD
+This option specifies instruction mnemonic for matching instructions.
+The \f(CW\*(C`.att_mnemonic\*(C'\fR and \f(CW\*(C`.intel_mnemonic\*(C'\fR directives will
+take precedent.
+.IP "\fB\-msyntax=\fR\fIatt\fR" 4
+.IX Item "-msyntax=att"
+.PD 0
+.IP "\fB\-msyntax=\fR\fIintel\fR" 4
+.IX Item "-msyntax=intel"
+.PD
+This option specifies instruction syntax when processing instructions.
+The \f(CW\*(C`.att_syntax\*(C'\fR and \f(CW\*(C`.intel_syntax\*(C'\fR directives will
+take precedent.
+.IP "\fB\-mnaked\-reg\fR" 4
+.IX Item "-mnaked-reg"
+This opetion specifies that registers don't require a \fB%\fR prefix.
+The \f(CW\*(C`.att_syntax\*(C'\fR and \f(CW\*(C`.intel_syntax\*(C'\fR directives will take precedent.
+.IP "\fB\-madd\-bnd\-prefix\fR" 4
+.IX Item "-madd-bnd-prefix"
+This option forces the assembler to add \s-1BND\s0 prefix to all branches, even
+if such prefix was not explicitly specified in the source code.
+.IP "\fB\-mno\-shared\fR" 4
+.IX Item "-mno-shared"
+On \s-1ELF\s0 target, the assembler normally optimizes out non-PLT relocations
+against defined non-weak global branch targets with default visibility.
+The \fB\-mshared\fR option tells the assembler to generate code which
+may go into a shared library where all non-weak global branch targets
+with default visibility can be preempted.  The resulting code is
+slightly bigger.  This option only affects the handling of branch
+instructions.
+.IP "\fB\-mbig\-obj\fR" 4
+.IX Item "-mbig-obj"
+On x86\-64 \s-1PE/COFF\s0 target this option forces the use of big object file
+format, which allows more than 32768 sections.
+.IP "\fB\-momit\-lock\-prefix=\fR\fIno\fR" 4
+.IX Item "-momit-lock-prefix=no"
+.PD 0
+.IP "\fB\-momit\-lock\-prefix=\fR\fIyes\fR" 4
+.IX Item "-momit-lock-prefix=yes"
+.PD
+These options control how the assembler should encode lock prefix.
+This option is intended as a workaround for processors, that fail on
+lock prefix. This option can only be safely used with single-core,
+single-thread computers
+\&\fB\-momit\-lock\-prefix=\fR\fIyes\fR will omit all lock prefixes.
+\&\fB\-momit\-lock\-prefix=\fR\fIno\fR will encode lock prefix as usual,
+which is the default.
+.IP "\fB\-mfence\-as\-lock\-add=\fR\fIno\fR" 4
+.IX Item "-mfence-as-lock-add=no"
+.PD 0
+.IP "\fB\-mfence\-as\-lock\-add=\fR\fIyes\fR" 4
+.IX Item "-mfence-as-lock-add=yes"
+.PD
+These options control how the assembler should encode lfence, mfence and
+sfence.
+\&\fB\-mfence\-as\-lock\-add=\fR\fIyes\fR will encode lfence, mfence and
+sfence as \fBlock addl \f(CB$0x0\fB, (%rsp)\fR in 64\-bit mode and
+\&\fBlock addl \f(CB$0x0\fB, (%esp)\fR in 32\-bit mode.
+\&\fB\-mfence\-as\-lock\-add=\fR\fIno\fR will encode lfence, mfence and
+sfence as usual, which is the default.
+.IP "\fB\-mrelax\-relocations=\fR\fIno\fR" 4
+.IX Item "-mrelax-relocations=no"
+.PD 0
+.IP "\fB\-mrelax\-relocations=\fR\fIyes\fR" 4
+.IX Item "-mrelax-relocations=yes"
+.PD
+These options control whether the assembler should generate relax
+relocations, R_386_GOT32X, in 32\-bit mode, or R_X86_64_GOTPCRELX and
+R_X86_64_REX_GOTPCRELX, in 64\-bit mode.
+\&\fB\-mrelax\-relocations=\fR\fIyes\fR will generate relax relocations.
+\&\fB\-mrelax\-relocations=\fR\fIno\fR will not generate relax
+relocations.  The default can be controlled by a configure option
+\&\fB\-\-enable\-x86\-relax\-relocations\fR.
+.IP "\fB\-mevexrcig=\fR\fIrne\fR" 4
+.IX Item "-mevexrcig=rne"
+.PD 0
+.IP "\fB\-mevexrcig=\fR\fIrd\fR" 4
+.IX Item "-mevexrcig=rd"
+.IP "\fB\-mevexrcig=\fR\fIru\fR" 4
+.IX Item "-mevexrcig=ru"
+.IP "\fB\-mevexrcig=\fR\fIrz\fR" 4
+.IX Item "-mevexrcig=rz"
+.PD
+These options control how the assembler should encode SAE-only
+\&\s-1EVEX\s0 instructions.  \fB\-mevexrcig=\fR\fIrne\fR will encode \s-1RC\s0 bits
+of \s-1EVEX\s0 instruction with 00, which is the default.
+\&\fB\-mevexrcig=\fR\fIrd\fR, \fB\-mevexrcig=\fR\fIru\fR
+and \fB\-mevexrcig=\fR\fIrz\fR will encode SAE-only \s-1EVEX\s0 instructions
+with 01, 10 and 11 \s-1RC\s0 bits, respectively.
+.IP "\fB\-mamd64\fR" 4
+.IX Item "-mamd64"
+.PD 0
+.IP "\fB\-mintel64\fR" 4
+.IX Item "-mintel64"
+.PD
+This option specifies that the assembler should accept only \s-1AMD64\s0 or
+Intel64 \s-1ISA\s0 in 64\-bit mode.  The default is to accept both.
+.PP
+The following options are available when as is configured for the
+Intel 80960 processor.
+.IP "\fB\-ACA | \-ACA_A | \-ACB | \-ACC | \-AKA | \-AKB | \-AKC | \-AMC\fR" 4
+.IX Item "-ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC"
+Specify which variant of the 960 architecture is the target.
+.IP "\fB\-b\fR" 4
+.IX Item "-b"
+Add code to collect statistics about branches taken.
+.IP "\fB\-no\-relax\fR" 4
+.IX Item "-no-relax"
+Do not alter compare-and-branch instructions for long displacements;
+error if necessary.
+.PP
+The following options are available when as is configured for the
+Ubicom \s-1IP2K\s0 series.
+.IP "\fB\-mip2022ext\fR" 4
+.IX Item "-mip2022ext"
+Specifies that the extended \s-1IP2022\s0 instructions are allowed.
+.IP "\fB\-mip2022\fR" 4
+.IX Item "-mip2022"
+Restores the default behaviour, which restricts the permitted instructions to
+just the basic \s-1IP2022\s0 ones.
+.PP
+The following options are available when as is configured for the
+Renesas M32C and M16C processors.
+.IP "\fB\-m32c\fR" 4
+.IX Item "-m32c"
+Assemble M32C instructions.
+.IP "\fB\-m16c\fR" 4
+.IX Item "-m16c"
+Assemble M16C instructions (the default).
+.IP "\fB\-relax\fR" 4
+.IX Item "-relax"
+Enable support for link-time relaxations.
+.IP "\fB\-h\-tick\-hex\fR" 4
+.IX Item "-h-tick-hex"
+Support H'00 style hex constants in addition to 0x00 style.
+.PP
+The following options are available when as is configured for the
+Renesas M32R (formerly Mitsubishi M32R) series.
+.IP "\fB\-\-m32rx\fR" 4
+.IX Item "--m32rx"
+Specify which processor in the M32R family is the target.  The default
+is normally the M32R, but this option changes it to the M32RX.
+.IP "\fB\-\-warn\-explicit\-parallel\-conflicts or \-\-Wp\fR" 4
+.IX Item "--warn-explicit-parallel-conflicts or --Wp"
+Produce warning messages when questionable parallel constructs are
+encountered.
+.IP "\fB\-\-no\-warn\-explicit\-parallel\-conflicts or \-\-Wnp\fR" 4
+.IX Item "--no-warn-explicit-parallel-conflicts or --Wnp"
+Do not produce warning messages when questionable parallel constructs are
+encountered.
+.PP
+The following options are available when as is configured for the
+Motorola 68000 series.
+.IP "\fB\-l\fR" 4
+.IX Item "-l"
+Shorten references to undefined symbols, to one word instead of two.
+.IP "\fB\-m68000 | \-m68008 | \-m68010 | \-m68020 | \-m68030\fR" 4
+.IX Item "-m68000 | -m68008 | -m68010 | -m68020 | -m68030"
+.PD 0
+.IP "\fB| \-m68040 | \-m68060 | \-m68302 | \-m68331 | \-m68332\fR" 4
+.IX Item "| -m68040 | -m68060 | -m68302 | -m68331 | -m68332"
+.IP "\fB| \-m68333 | \-m68340 | \-mcpu32 | \-m5200\fR" 4
+.IX Item "| -m68333 | -m68340 | -mcpu32 | -m5200"
+.PD
+Specify what processor in the 68000 family is the target.  The default
+is normally the 68020, but this can be changed at configuration time.
+.IP "\fB\-m68881 | \-m68882 | \-mno\-68881 | \-mno\-68882\fR" 4
+.IX Item "-m68881 | -m68882 | -mno-68881 | -mno-68882"
+The target machine does (or does not) have a floating-point coprocessor.
+The default is to assume a coprocessor for 68020, 68030, and cpu32.  Although
+the basic 68000 is not compatible with the 68881, a combination of the
+two can be specified, since it's possible to do emulation of the
+coprocessor instructions with the main processor.
+.IP "\fB\-m68851 | \-mno\-68851\fR" 4
+.IX Item "-m68851 | -mno-68851"
+The target machine does (or does not) have a memory-management
+unit coprocessor.  The default is to assume an \s-1MMU\s0 for 68020 and up.
+.PP
+The following options are available when as is configured for an
+Altera Nios \s-1II\s0 processor.
+.IP "\fB\-relax\-section\fR" 4
+.IX Item "-relax-section"
+Replace identified out-of-range branches with PC-relative \f(CW\*(C`jmp\*(C'\fR
+sequences when possible.  The generated code sequences are suitable
+for use in position-independent code, but there is a practical limit
+on the extended branch range because of the length of the sequences.
+This option is the default.
+.IP "\fB\-relax\-all\fR" 4
+.IX Item "-relax-all"
+Replace branch instructions not determinable to be in range
+and all call instructions with \f(CW\*(C`jmp\*(C'\fR and \f(CW\*(C`callr\*(C'\fR sequences
+(respectively).  This option generates absolute relocations against the
+target symbols and is not appropriate for position-independent code.
+.IP "\fB\-no\-relax\fR" 4
+.IX Item "-no-relax"
+Do not replace any branches or calls.
+.IP "\fB\-EB\fR" 4
+.IX Item "-EB"
+Generate big-endian output.
+.IP "\fB\-EL\fR" 4
+.IX Item "-EL"
+Generate little-endian output.  This is the default.
+.IP "\fB\-march=\fR\fIarchitecture\fR" 4
+.IX Item "-march=architecture"
+This option specifies the target architecture.  The assembler issues
+an error message if an attempt is made to assemble an instruction which
+will not execute on the target architecture.  The following architecture
+names are recognized:
+\&\f(CW\*(C`r1\*(C'\fR,
+\&\f(CW\*(C`r2\*(C'\fR.  
+The default is \f(CW\*(C`r1\*(C'\fR.
+.PP
+The following options are available when as is configured for a
+Meta processor.
+.ie n .IP """\-mcpu=metac11""" 4
+.el .IP "\f(CW\-mcpu=metac11\fR" 4
+.IX Item "-mcpu=metac11"
+Generate code for Meta 1.1.
+.ie n .IP """\-mcpu=metac12""" 4
+.el .IP "\f(CW\-mcpu=metac12\fR" 4
+.IX Item "-mcpu=metac12"
+Generate code for Meta 1.2.
+.ie n .IP """\-mcpu=metac21""" 4
+.el .IP "\f(CW\-mcpu=metac21\fR" 4
+.IX Item "-mcpu=metac21"
+Generate code for Meta 2.1.
+.ie n .IP """\-mfpu=metac21""" 4
+.el .IP "\f(CW\-mfpu=metac21\fR" 4
+.IX Item "-mfpu=metac21"
+Allow code to use \s-1FPU\s0 hardware of Meta 2.1.
+.PP
+See the info pages for documentation of the MMIX-specific options.
+.PP
+The following options are available when as is configured for a
+\&\s-1NDS32\s0 processor.
+.ie n .IP """\-O1""" 4
+.el .IP "\f(CW\-O1\fR" 4
+.IX Item "-O1"
+Optimize for performance.
+.ie n .IP """\-Os""" 4
+.el .IP "\f(CW\-Os\fR" 4
+.IX Item "-Os"
+Optimize for space.
+.ie n .IP """\-EL""" 4
+.el .IP "\f(CW\-EL\fR" 4
+.IX Item "-EL"
+Produce little endian data output.
+.ie n .IP """\-EB""" 4
+.el .IP "\f(CW\-EB\fR" 4
+.IX Item "-EB"
+Produce little endian data output.
+.ie n .IP """\-mpic""" 4
+.el .IP "\f(CW\-mpic\fR" 4
+.IX Item "-mpic"
+Generate \s-1PIC.\s0
+.ie n .IP """\-mno\-fp\-as\-gp\-relax""" 4
+.el .IP "\f(CW\-mno\-fp\-as\-gp\-relax\fR" 4
+.IX Item "-mno-fp-as-gp-relax"
+Suppress fp-as-gp relaxation for this file.
+.ie n .IP """\-mb2bb\-relax""" 4
+.el .IP "\f(CW\-mb2bb\-relax\fR" 4
+.IX Item "-mb2bb-relax"
+Back-to-back branch optimization.
+.ie n .IP """\-mno\-all\-relax""" 4
+.el .IP "\f(CW\-mno\-all\-relax\fR" 4
+.IX Item "-mno-all-relax"
+Suppress all relaxation for this file.
+.ie n .IP """\-march=<arch name>""" 4
+.el .IP "\f(CW\-march=<arch name>\fR" 4
+.IX Item "-march=<arch name>"
+Assemble for architecture <arch name> which could be v3, v3j, v3m, v3f,
+v3s, v2, v2j, v2f, v2s.
+.ie n .IP """\-mbaseline=<baseline>""" 4
+.el .IP "\f(CW\-mbaseline=<baseline>\fR" 4
+.IX Item "-mbaseline=<baseline>"
+Assemble for baseline <baseline> which could be v2, v3, v3m.
+.ie n .IP """\-mfpu\-freg=\f(CIFREG\f(CW""" 4
+.el .IP "\f(CW\-mfpu\-freg=\f(CIFREG\f(CW\fR" 4
+.IX Item "-mfpu-freg=FREG"
+Specify a \s-1FPU\s0 configuration.
+.RS 4
+.ie n .IP """0      8 SP /  4 DP registers""" 4
+.el .IP "\f(CW0      8 SP /  4 DP registers\fR" 4
+.IX Item "0 8 SP / 4 DP registers"
+.PD 0
+.ie n .IP """1     16 SP /  8 DP registers""" 4
+.el .IP "\f(CW1     16 SP /  8 DP registers\fR" 4
+.IX Item "1 16 SP / 8 DP registers"
+.ie n .IP """2     32 SP / 16 DP registers""" 4
+.el .IP "\f(CW2     32 SP / 16 DP registers\fR" 4
+.IX Item "2 32 SP / 16 DP registers"
+.ie n .IP """3     32 SP / 32 DP registers""" 4
+.el .IP "\f(CW3     32 SP / 32 DP registers\fR" 4
+.IX Item "3 32 SP / 32 DP registers"
+.RE
+.RS 4
+.RE
+.ie n .IP """\-mabi=\f(CIabi\f(CW""" 4
+.el .IP "\f(CW\-mabi=\f(CIabi\f(CW\fR" 4
+.IX Item "-mabi=abi"
+.PD
+Specify a abi version <abi> could be v1, v2, v2fp, v2fpp.
+.ie n .IP """\-m[no\-]mac""" 4
+.el .IP "\f(CW\-m[no\-]mac\fR" 4
+.IX Item "-m[no-]mac"
+Enable/Disable Multiply instructions support.
+.ie n .IP """\-m[no\-]div""" 4
+.el .IP "\f(CW\-m[no\-]div\fR" 4
+.IX Item "-m[no-]div"
+Enable/Disable Divide instructions support.
+.ie n .IP """\-m[no\-]16bit\-ext""" 4
+.el .IP "\f(CW\-m[no\-]16bit\-ext\fR" 4
+.IX Item "-m[no-]16bit-ext"
+Enable/Disable 16\-bit extension
+.ie n .IP """\-m[no\-]dx\-regs""" 4
+.el .IP "\f(CW\-m[no\-]dx\-regs\fR" 4
+.IX Item "-m[no-]dx-regs"
+Enable/Disable d0/d1 registers
+.ie n .IP """\-m[no\-]perf\-ext""" 4
+.el .IP "\f(CW\-m[no\-]perf\-ext\fR" 4
+.IX Item "-m[no-]perf-ext"
+Enable/Disable Performance extension
+.ie n .IP """\-m[no\-]perf2\-ext""" 4
+.el .IP "\f(CW\-m[no\-]perf2\-ext\fR" 4
+.IX Item "-m[no-]perf2-ext"
+Enable/Disable Performance extension 2
+.ie n .IP """\-m[no\-]string\-ext""" 4
+.el .IP "\f(CW\-m[no\-]string\-ext\fR" 4
+.IX Item "-m[no-]string-ext"
+Enable/Disable String extension
+.ie n .IP """\-m[no\-]reduced\-regs""" 4
+.el .IP "\f(CW\-m[no\-]reduced\-regs\fR" 4
+.IX Item "-m[no-]reduced-regs"
+Enable/Disable Reduced Register configuration (\s-1GPR16\s0) option
+.ie n .IP """\-m[no\-]audio\-isa\-ext""" 4
+.el .IP "\f(CW\-m[no\-]audio\-isa\-ext\fR" 4
+.IX Item "-m[no-]audio-isa-ext"
+Enable/Disable \s-1AUDIO ISA\s0 extension
+.ie n .IP """\-m[no\-]fpu\-sp\-ext""" 4
+.el .IP "\f(CW\-m[no\-]fpu\-sp\-ext\fR" 4
+.IX Item "-m[no-]fpu-sp-ext"
+Enable/Disable \s-1FPU SP\s0 extension
+.ie n .IP """\-m[no\-]fpu\-dp\-ext""" 4
+.el .IP "\f(CW\-m[no\-]fpu\-dp\-ext\fR" 4
+.IX Item "-m[no-]fpu-dp-ext"
+Enable/Disable \s-1FPU DP\s0 extension
+.ie n .IP """\-m[no\-]fpu\-fma""" 4
+.el .IP "\f(CW\-m[no\-]fpu\-fma\fR" 4
+.IX Item "-m[no-]fpu-fma"
+Enable/Disable \s-1FPU\s0 fused-multiply-add instructions
+.ie n .IP """\-mall\-ext""" 4
+.el .IP "\f(CW\-mall\-ext\fR" 4
+.IX Item "-mall-ext"
+Turn on all extensions and instructions support
+.PP
+The following options are available when as is configured for a
+PowerPC processor.
+.IP "\fB\-a32\fR" 4
+.IX Item "-a32"
+Generate \s-1ELF32\s0 or \s-1XCOFF32.\s0
+.IP "\fB\-a64\fR" 4
+.IX Item "-a64"
+Generate \s-1ELF64\s0 or \s-1XCOFF64.\s0
+.IP "\fB\-K \s-1PIC\s0\fR" 4
+.IX Item "-K PIC"
+Set \s-1EF_PPC_RELOCATABLE_LIB\s0 in \s-1ELF\s0 flags.
+.IP "\fB\-mpwrx | \-mpwr2\fR" 4
+.IX Item "-mpwrx | -mpwr2"
+Generate code for \s-1POWER/2 \s0(\s-1RIOS2\s0).
+.IP "\fB\-mpwr\fR" 4
+.IX Item "-mpwr"
+Generate code for \s-1POWER \s0(\s-1RIOS1\s0)
+.IP "\fB\-m601\fR" 4
+.IX Item "-m601"
+Generate code for PowerPC 601.
+.IP "\fB\-mppc, \-mppc32, \-m603, \-m604\fR" 4
+.IX Item "-mppc, -mppc32, -m603, -m604"
+Generate code for PowerPC 603/604.
+.IP "\fB\-m403, \-m405\fR" 4
+.IX Item "-m403, -m405"
+Generate code for PowerPC 403/405.
+.IP "\fB\-m440\fR" 4
+.IX Item "-m440"
+Generate code for PowerPC 440.  BookE and some 405 instructions.
+.IP "\fB\-m464\fR" 4
+.IX Item "-m464"
+Generate code for PowerPC 464.
+.IP "\fB\-m476\fR" 4
+.IX Item "-m476"
+Generate code for PowerPC 476.
+.IP "\fB\-m7400, \-m7410, \-m7450, \-m7455\fR" 4
+.IX Item "-m7400, -m7410, -m7450, -m7455"
+Generate code for PowerPC 7400/7410/7450/7455.
+.IP "\fB\-m750cl\fR" 4
+.IX Item "-m750cl"
+Generate code for PowerPC 750CL.
+.IP "\fB\-m821, \-m850, \-m860\fR" 4
+.IX Item "-m821, -m850, -m860"
+Generate code for PowerPC 821/850/860.
+.IP "\fB\-mppc64, \-m620\fR" 4
+.IX Item "-mppc64, -m620"
+Generate code for PowerPC 620/625/630.
+.IP "\fB\-me500, \-me500x2\fR" 4
+.IX Item "-me500, -me500x2"
+Generate code for Motorola e500 core complex.
+.IP "\fB\-me500mc\fR" 4
+.IX Item "-me500mc"
+Generate code for Freescale e500mc core complex.
+.IP "\fB\-me500mc64\fR" 4
+.IX Item "-me500mc64"
+Generate code for Freescale e500mc64 core complex.
+.IP "\fB\-me5500\fR" 4
+.IX Item "-me5500"
+Generate code for Freescale e5500 core complex.
+.IP "\fB\-me6500\fR" 4
+.IX Item "-me6500"
+Generate code for Freescale e6500 core complex.
+.IP "\fB\-mspe\fR" 4
+.IX Item "-mspe"
+Generate code for Motorola \s-1SPE\s0 instructions.
+.IP "\fB\-mtitan\fR" 4
+.IX Item "-mtitan"
+Generate code for AppliedMicro Titan core complex.
+.IP "\fB\-mppc64bridge\fR" 4
+.IX Item "-mppc64bridge"
+Generate code for PowerPC 64, including bridge insns.
+.IP "\fB\-mbooke\fR" 4
+.IX Item "-mbooke"
+Generate code for 32\-bit BookE.
+.IP "\fB\-ma2\fR" 4
+.IX Item "-ma2"
+Generate code for A2 architecture.
+.IP "\fB\-me300\fR" 4
+.IX Item "-me300"
+Generate code for PowerPC e300 family.
+.IP "\fB\-maltivec\fR" 4
+.IX Item "-maltivec"
+Generate code for processors with AltiVec instructions.
+.IP "\fB\-mvle\fR" 4
+.IX Item "-mvle"
+Generate code for Freescale PowerPC \s-1VLE\s0 instructions.
+.IP "\fB\-mvsx\fR" 4
+.IX Item "-mvsx"
+Generate code for processors with Vector-Scalar (\s-1VSX\s0) instructions.
+.IP "\fB\-mhtm\fR" 4
+.IX Item "-mhtm"
+Generate code for processors with Hardware Transactional Memory instructions.
+.IP "\fB\-mpower4, \-mpwr4\fR" 4
+.IX Item "-mpower4, -mpwr4"
+Generate code for Power4 architecture.
+.IP "\fB\-mpower5, \-mpwr5, \-mpwr5x\fR" 4
+.IX Item "-mpower5, -mpwr5, -mpwr5x"
+Generate code for Power5 architecture.
+.IP "\fB\-mpower6, \-mpwr6\fR" 4
+.IX Item "-mpower6, -mpwr6"
+Generate code for Power6 architecture.
+.IP "\fB\-mpower7, \-mpwr7\fR" 4
+.IX Item "-mpower7, -mpwr7"
+Generate code for Power7 architecture.
+.IP "\fB\-mpower8, \-mpwr8\fR" 4
+.IX Item "-mpower8, -mpwr8"
+Generate code for Power8 architecture.
+.IP "\fB\-mpower9, \-mpwr9\fR" 4
+.IX Item "-mpower9, -mpwr9"
+Generate code for Power9 architecture.
+.IP "\fB\-mcell\fR" 4
+.IX Item "-mcell"
+.PD 0
+.IP "\fB\-mcell\fR" 4
+.IX Item "-mcell"
+.PD
+Generate code for Cell Broadband Engine architecture.
+.IP "\fB\-mcom\fR" 4
+.IX Item "-mcom"
+Generate code Power/PowerPC common instructions.
+.IP "\fB\-many\fR" 4
+.IX Item "-many"
+Generate code for any architecture (\s-1PWR/PWRX/PPC\s0).
+.IP "\fB\-mregnames\fR" 4
+.IX Item "-mregnames"
+Allow symbolic names for registers.
+.IP "\fB\-mno\-regnames\fR" 4
+.IX Item "-mno-regnames"
+Do not allow symbolic names for registers.
+.IP "\fB\-mrelocatable\fR" 4
+.IX Item "-mrelocatable"
+Support for \s-1GCC\s0's \-mrelocatable option.
+.IP "\fB\-mrelocatable\-lib\fR" 4
+.IX Item "-mrelocatable-lib"
+Support for \s-1GCC\s0's \-mrelocatable\-lib option.
+.IP "\fB\-memb\fR" 4
+.IX Item "-memb"
+Set \s-1PPC_EMB\s0 bit in \s-1ELF\s0 flags.
+.IP "\fB\-mlittle, \-mlittle\-endian, \-le\fR" 4
+.IX Item "-mlittle, -mlittle-endian, -le"
+Generate code for a little endian machine.
+.IP "\fB\-mbig, \-mbig\-endian, \-be\fR" 4
+.IX Item "-mbig, -mbig-endian, -be"
+Generate code for a big endian machine.
+.IP "\fB\-msolaris\fR" 4
+.IX Item "-msolaris"
+Generate code for Solaris.
+.IP "\fB\-mno\-solaris\fR" 4
+.IX Item "-mno-solaris"
+Do not generate code for Solaris.
+.IP "\fB\-nops=\fR\fIcount\fR" 4
+.IX Item "-nops=count"
+If an alignment directive inserts more than \fIcount\fR nops, put a
+branch at the beginning to skip execution of the nops.
+.PP
+See the info pages for documentation of the RX-specific options.
+.PP
+The following options are available when as is configured for the s390
+processor family.
+.IP "\fB\-m31\fR" 4
+.IX Item "-m31"
+.PD 0
+.IP "\fB\-m64\fR" 4
+.IX Item "-m64"
+.PD
+Select the word size, either 31/32 bits or 64 bits.
+.IP "\fB\-mesa\fR" 4
+.IX Item "-mesa"
+.PD 0
+.IP "\fB\-mzarch\fR" 4
+.IX Item "-mzarch"
+.PD
+Select the architecture mode, either the Enterprise System
+Architecture (esa) or the z/Architecture mode (zarch).
+.IP "\fB\-march=\fR\fIprocessor\fR" 4
+.IX Item "-march=processor"
+Specify which s390 processor variant is the target, \fBg6\fR, \fBg6\fR,
+\&\fBz900\fR, \fBz990\fR, \fBz9\-109\fR, \fBz9\-ec\fR, \fBz10\fR,
+\&\fBz196\fR, \fBzEC12\fR, or \fBz13\fR.
+.IP "\fB\-mregnames\fR" 4
+.IX Item "-mregnames"
+.PD 0
+.IP "\fB\-mno\-regnames\fR" 4
+.IX Item "-mno-regnames"
+.PD
+Allow or disallow symbolic names for registers.
+.IP "\fB\-mwarn\-areg\-zero\fR" 4
+.IX Item "-mwarn-areg-zero"
+Warn whenever the operand for a base or index register has been specified
+but evaluates to zero.
+.PP
+The following options are available when as is configured for a
+\&\s-1TMS320C6000\s0 processor.
+.IP "\fB\-march=\fR\fIarch\fR" 4
+.IX Item "-march=arch"
+Enable (only) instructions from architecture \fIarch\fR.  By default,
+all instructions are permitted.
+.Sp
+The following values of \fIarch\fR are accepted: \f(CW\*(C`c62x\*(C'\fR,
+\&\f(CW\*(C`c64x\*(C'\fR, \f(CW\*(C`c64x+\*(C'\fR, \f(CW\*(C`c67x\*(C'\fR, \f(CW\*(C`c67x+\*(C'\fR, \f(CW\*(C`c674x\*(C'\fR.
+.IP "\fB\-mdsbt\fR" 4
+.IX Item "-mdsbt"
+.PD 0
+.IP "\fB\-mno\-dsbt\fR" 4
+.IX Item "-mno-dsbt"
+.PD
+The \fB\-mdsbt\fR option causes the assembler to generate the
+\&\f(CW\*(C`Tag_ABI_DSBT\*(C'\fR attribute with a value of 1, indicating that the
+code is using \s-1DSBT\s0 addressing.  The \fB\-mno\-dsbt\fR option, the
+default, causes the tag to have a value of 0, indicating that the code
+does not use \s-1DSBT\s0 addressing.  The linker will emit a warning if
+objects of different type (\s-1DSBT\s0 and non-DSBT) are linked together.
+.IP "\fB\-mpid=no\fR" 4
+.IX Item "-mpid=no"
+.PD 0
+.IP "\fB\-mpid=near\fR" 4
+.IX Item "-mpid=near"
+.IP "\fB\-mpid=far\fR" 4
+.IX Item "-mpid=far"
+.PD
+The \fB\-mpid=\fR option causes the assembler to generate the
+\&\f(CW\*(C`Tag_ABI_PID\*(C'\fR attribute with a value indicating the form of data
+addressing used by the code.  \fB\-mpid=no\fR, the default,
+indicates position-dependent data addressing, \fB\-mpid=near\fR
+indicates position-independent addressing with \s-1GOT\s0 accesses using near
+\&\s-1DP\s0 addressing, and \fB\-mpid=far\fR indicates position-independent
+addressing with \s-1GOT\s0 accesses using far \s-1DP\s0 addressing.  The linker will
+emit a warning if objects built with different settings of this option
+are linked together.
+.IP "\fB\-mpic\fR" 4
+.IX Item "-mpic"
+.PD 0
+.IP "\fB\-mno\-pic\fR" 4
+.IX Item "-mno-pic"
+.PD
+The \fB\-mpic\fR option causes the assembler to generate the
+\&\f(CW\*(C`Tag_ABI_PIC\*(C'\fR attribute with a value of 1, indicating that the
+code is using position-independent code addressing,  The
+\&\f(CW\*(C`\-mno\-pic\*(C'\fR option, the default, causes the tag to have a value of
+0, indicating position-dependent code addressing.  The linker will
+emit a warning if objects of different type (position-dependent and
+position-independent) are linked together.
+.IP "\fB\-mbig\-endian\fR" 4
+.IX Item "-mbig-endian"
+.PD 0
+.IP "\fB\-mlittle\-endian\fR" 4
+.IX Item "-mlittle-endian"
+.PD
+Generate code for the specified endianness.  The default is
+little-endian.
+.PP
+The following options are available when as is configured for a TILE-Gx
+processor.
+.IP "\fB\-m32 | \-m64\fR" 4
+.IX Item "-m32 | -m64"
+Select the word size, either 32 bits or 64 bits.
+.IP "\fB\-EB | \-EL\fR" 4
+.IX Item "-EB | -EL"
+Select the endianness, either big-endian (\-EB) or little-endian (\-EL).
+.PP
+The following option is available when as is configured for a Visium
+processor.
+.IP "\fB\-mtune=\fR\fIarch\fR" 4
+.IX Item "-mtune=arch"
+This option specifies the target architecture.  If an attempt is made to
+assemble an instruction that will not execute on the target architecture,
+the assembler will issue an error message.
+.Sp
+The following names are recognized:
+\&\f(CW\*(C`mcm24\*(C'\fR
+\&\f(CW\*(C`mcm\*(C'\fR
+\&\f(CW\*(C`gr5\*(C'\fR
+\&\f(CW\*(C`gr6\*(C'\fR
+.PP
+The following options are available when as is configured for an
+Xtensa processor.
+.IP "\fB\-\-text\-section\-literals | \-\-no\-text\-section\-literals\fR" 4
+.IX Item "--text-section-literals | --no-text-section-literals"
+Control the treatment of literal pools.  The default is
+\&\fB\-\-no\-text\-section\-literals\fR, which places literals in
+separate sections in the output file.  This allows the literal pool to be
+placed in a data \s-1RAM/ROM. \s0 With \fB\-\-text\-section\-literals\fR, the
+literals are interspersed in the text section in order to keep them as
+close as possible to their references.  This may be necessary for large
+assembly files, where the literals would otherwise be out of range of the
+\&\f(CW\*(C`L32R\*(C'\fR instructions in the text section.  Literals are grouped into
+pools following \f(CW\*(C`.literal_position\*(C'\fR directives or preceding
+\&\f(CW\*(C`ENTRY\*(C'\fR instructions.  These options only affect literals referenced
+via PC-relative \f(CW\*(C`L32R\*(C'\fR instructions; literals for absolute mode
+\&\f(CW\*(C`L32R\*(C'\fR instructions are handled separately.
+.IP "\fB\-\-auto\-litpools | \-\-no\-auto\-litpools\fR" 4
+.IX Item "--auto-litpools | --no-auto-litpools"
+Control the treatment of literal pools.  The default is
+\&\fB\-\-no\-auto\-litpools\fR, which in the absence of
+\&\fB\-\-text\-section\-literals\fR places literals in separate sections
+in the output file.  This allows the literal pool to be placed in a data
+\&\s-1RAM/ROM. \s0 With \fB\-\-auto\-litpools\fR, the literals are interspersed
+in the text section in order to keep them as close as possible to their
+references, explicit \f(CW\*(C`.literal_position\*(C'\fR directives are not
+required.  This may be necessary for very large functions, where single
+literal pool at the beginning of the function may not be reachable by
+\&\f(CW\*(C`L32R\*(C'\fR instructions at the end.  These options only affect
+literals referenced via PC-relative \f(CW\*(C`L32R\*(C'\fR instructions; literals
+for absolute mode \f(CW\*(C`L32R\*(C'\fR instructions are handled separately.
+When used together with \fB\-\-text\-section\-literals\fR,
+\&\fB\-\-auto\-litpools\fR takes precedence.
+.IP "\fB\-\-absolute\-literals | \-\-no\-absolute\-literals\fR" 4
+.IX Item "--absolute-literals | --no-absolute-literals"
+Indicate to the assembler whether \f(CW\*(C`L32R\*(C'\fR instructions use absolute
+or PC-relative addressing.  If the processor includes the absolute
+addressing option, the default is to use absolute \f(CW\*(C`L32R\*(C'\fR
+relocations.  Otherwise, only the PC-relative \f(CW\*(C`L32R\*(C'\fR relocations
+can be used.
+.IP "\fB\-\-target\-align | \-\-no\-target\-align\fR" 4
+.IX Item "--target-align | --no-target-align"
+Enable or disable automatic alignment to reduce branch penalties at some
+expense in code size.    This optimization is enabled by default.  Note
+that the assembler will always align instructions like \f(CW\*(C`LOOP\*(C'\fR that
+have fixed alignment requirements.
+.IP "\fB\-\-longcalls | \-\-no\-longcalls\fR" 4
+.IX Item "--longcalls | --no-longcalls"
+Enable or disable transformation of call instructions to allow calls
+across a greater range of addresses.    This option should be used when call
+targets can potentially be out of range.  It may degrade both code size
+and performance, but the linker can generally optimize away the
+unnecessary overhead when a call ends up within range.  The default is
+\&\fB\-\-no\-longcalls\fR.
+.IP "\fB\-\-transform | \-\-no\-transform\fR" 4
+.IX Item "--transform | --no-transform"
+Enable or disable all assembler transformations of Xtensa instructions,
+including both relaxation and optimization.  The default is
+\&\fB\-\-transform\fR; \fB\-\-no\-transform\fR should only be used in the
+rare cases when the instructions must be exactly as specified in the
+assembly source.  Using \fB\-\-no\-transform\fR causes out of range
+instruction operands to be errors.
+.IP "\fB\-\-rename\-section\fR \fIoldname\fR\fB=\fR\fInewname\fR" 4
+.IX Item "--rename-section oldname=newname"
+Rename the \fIoldname\fR section to \fInewname\fR.  This option can be used
+multiple times to rename multiple sections.
+.IP "\fB\-\-trampolines | \-\-no\-trampolines\fR" 4
+.IX Item "--trampolines | --no-trampolines"
+Enable or disable transformation of jump instructions to allow jumps
+across a greater range of addresses.    This option should be used when jump targets can
+potentially be out of range.  In the absence of such jumps this option
+does not affect code size or performance.  The default is
+\&\fB\-\-trampolines\fR.
+.PP
+The following options are available when as is configured for
+a Z80 family processor.
+.IP "\fB\-z80\fR" 4
+.IX Item "-z80"
+Assemble for Z80 processor.
+.IP "\fB\-r800\fR" 4
+.IX Item "-r800"
+Assemble for R800 processor.
+.IP "\fB\-ignore\-undocumented\-instructions\fR" 4
+.IX Item "-ignore-undocumented-instructions"
+.PD 0
+.IP "\fB\-Wnud\fR" 4
+.IX Item "-Wnud"
+.PD
+Assemble undocumented Z80 instructions that also work on R800 without warning.
+.IP "\fB\-ignore\-unportable\-instructions\fR" 4
+.IX Item "-ignore-unportable-instructions"
+.PD 0
+.IP "\fB\-Wnup\fR" 4
+.IX Item "-Wnup"
+.PD
+Assemble all undocumented Z80 instructions without warning.
+.IP "\fB\-warn\-undocumented\-instructions\fR" 4
+.IX Item "-warn-undocumented-instructions"
+.PD 0
+.IP "\fB\-Wud\fR" 4
+.IX Item "-Wud"
+.PD
+Issue a warning for undocumented Z80 instructions that also work on R800.
+.IP "\fB\-warn\-unportable\-instructions\fR" 4
+.IX Item "-warn-unportable-instructions"
+.PD 0
+.IP "\fB\-Wup\fR" 4
+.IX Item "-Wup"
+.PD
+Issue a warning for undocumented Z80 instructions that do not work on R800.
+.IP "\fB\-forbid\-undocumented\-instructions\fR" 4
+.IX Item "-forbid-undocumented-instructions"
+.PD 0
+.IP "\fB\-Fud\fR" 4
+.IX Item "-Fud"
+.PD
+Treat all undocumented instructions as errors.
+.IP "\fB\-forbid\-unportable\-instructions\fR" 4
+.IX Item "-forbid-unportable-instructions"
+.PD 0
+.IP "\fB\-Fup\fR" 4
+.IX Item "-Fup"
+.PD
+Treat undocumented Z80 instructions that do not work on R800 as errors.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIgcc\fR\|(1), \fIld\fR\|(1), and the Info entries for \fIbinutils\fR and \fIld\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-c++filt.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-c++filt.1
new file mode 100644
index 0000000..5af672b
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-c++filt.1
@@ -0,0 +1,341 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "C++FILT 1"
+.TH C++FILT 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+c++filt \- Demangle C++ and Java symbols.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+c++filt [\fB\-_\fR|\fB\-\-strip\-underscore\fR]
+        [\fB\-n\fR|\fB\-\-no\-strip\-underscore\fR]
+        [\fB\-p\fR|\fB\-\-no\-params\fR]
+        [\fB\-t\fR|\fB\-\-types\fR]
+        [\fB\-i\fR|\fB\-\-no\-verbose\fR]
+        [\fB\-s\fR \fIformat\fR|\fB\-\-format=\fR\fIformat\fR]
+        [\fB\-\-help\fR]  [\fB\-\-version\fR]  [\fIsymbol\fR...]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+The \*(C+ and Java languages provide function overloading, which means
+that you can write many functions with the same name, providing that
+each function takes parameters of different types.  In order to be
+able to distinguish these similarly named functions \*(C+ and Java
+encode them into a low-level assembler name which uniquely identifies
+each different version.  This process is known as \fImangling\fR. The
+\&\fBc++filt\fR
+[1]
+program does the inverse mapping: it decodes (\fIdemangles\fR) low-level
+names into user-level names so that they can be read.
+.PP
+Every alphanumeric word (consisting of letters, digits, underscores,
+dollars, or periods) seen in the input is a potential mangled name.
+If the name decodes into a \*(C+ name, the \*(C+ name replaces the
+low-level name in the output, otherwise the original word is output.
+In this way you can pass an entire assembler source file, containing
+mangled names, through \fBc++filt\fR and see the same source file
+containing demangled names.
+.PP
+You can also use \fBc++filt\fR to decipher individual symbols by
+passing them on the command line:
+.PP
+.Vb 1
+\&        c++filt <symbol>
+.Ve
+.PP
+If no \fIsymbol\fR arguments are given, \fBc++filt\fR reads symbol
+names from the standard input instead.  All the results are printed on
+the standard output.  The difference between reading names from the
+command line versus reading names from the standard input is that
+command line arguments are expected to be just mangled names and no
+checking is performed to separate them from surrounding text.  Thus
+for example:
+.PP
+.Vb 1
+\&        c++filt \-n _Z1fv
+.Ve
+.PP
+will work and demangle the name to \*(L"f()\*(R" whereas:
+.PP
+.Vb 1
+\&        c++filt \-n _Z1fv,
+.Ve
+.PP
+will not work.  (Note the extra comma at the end of the mangled
+name which makes it invalid).  This command however will work:
+.PP
+.Vb 1
+\&        echo _Z1fv, | c++filt \-n
+.Ve
+.PP
+and will display \*(L"f(),\*(R", i.e., the demangled name followed by a
+trailing comma.  This behaviour is because when the names are read
+from the standard input it is expected that they might be part of an
+assembler source file where there might be extra, extraneous
+characters trailing after a mangled name.  For example:
+.PP
+.Vb 1
+\&            .type   _Z1fv, @function
+.Ve
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-_\fR" 4
+.IX Item "-_"
+.PD 0
+.IP "\fB\-\-strip\-underscore\fR" 4
+.IX Item "--strip-underscore"
+.PD
+On some systems, both the C and \*(C+ compilers put an underscore in front
+of every name.  For example, the C name \f(CW\*(C`foo\*(C'\fR gets the low-level
+name \f(CW\*(C`_foo\*(C'\fR.  This option removes the initial underscore.  Whether
+\&\fBc++filt\fR removes the underscore by default is target dependent.
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+.PD 0
+.IP "\fB\-\-no\-strip\-underscore\fR" 4
+.IX Item "--no-strip-underscore"
+.PD
+Do not remove the initial underscore.
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-no\-params\fR" 4
+.IX Item "--no-params"
+.PD
+When demangling the name of a function, do not display the types of
+the function's parameters.
+.IP "\fB\-t\fR" 4
+.IX Item "-t"
+.PD 0
+.IP "\fB\-\-types\fR" 4
+.IX Item "--types"
+.PD
+Attempt to demangle types as well as function names.  This is disabled
+by default since mangled types are normally only used internally in
+the compiler, and they can be confused with non-mangled names.  For example,
+a function called \*(L"a\*(R" treated as a mangled type name would be
+demangled to \*(L"signed char\*(R".
+.IP "\fB\-i\fR" 4
+.IX Item "-i"
+.PD 0
+.IP "\fB\-\-no\-verbose\fR" 4
+.IX Item "--no-verbose"
+.PD
+Do not include implementation details (if any) in the demangled
+output.
+.IP "\fB\-s\fR \fIformat\fR" 4
+.IX Item "-s format"
+.PD 0
+.IP "\fB\-\-format=\fR\fIformat\fR" 4
+.IX Item "--format=format"
+.PD
+\&\fBc++filt\fR can decode various methods of mangling, used by
+different compilers.  The argument to this option selects which
+method it uses:
+.RS 4
+.ie n .IP """auto""" 4
+.el .IP "\f(CWauto\fR" 4
+.IX Item "auto"
+Automatic selection based on executable (the default method)
+.ie n .IP """gnu""" 4
+.el .IP "\f(CWgnu\fR" 4
+.IX Item "gnu"
+the one used by the \s-1GNU \*(C+\s0 compiler (g++)
+.ie n .IP """lucid""" 4
+.el .IP "\f(CWlucid\fR" 4
+.IX Item "lucid"
+the one used by the Lucid compiler (lcc)
+.ie n .IP """arm""" 4
+.el .IP "\f(CWarm\fR" 4
+.IX Item "arm"
+the one specified by the \*(C+ Annotated Reference Manual
+.ie n .IP """hp""" 4
+.el .IP "\f(CWhp\fR" 4
+.IX Item "hp"
+the one used by the \s-1HP\s0 compiler (aCC)
+.ie n .IP """edg""" 4
+.el .IP "\f(CWedg\fR" 4
+.IX Item "edg"
+the one used by the \s-1EDG\s0 compiler
+.ie n .IP """gnu\-v3""" 4
+.el .IP "\f(CWgnu\-v3\fR" 4
+.IX Item "gnu-v3"
+the one used by the \s-1GNU \*(C+\s0 compiler (g++) with the V3 \s-1ABI.\s0
+.ie n .IP """java""" 4
+.el .IP "\f(CWjava\fR" 4
+.IX Item "java"
+the one used by the \s-1GNU\s0 Java compiler (gcj)
+.ie n .IP """gnat""" 4
+.el .IP "\f(CWgnat\fR" 4
+.IX Item "gnat"
+the one used by the \s-1GNU\s0 Ada compiler (\s-1GNAT\s0).
+.RE
+.RS 4
+.RE
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Print a summary of the options to \fBc++filt\fR and exit.
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+Print the version number of \fBc++filt\fR and exit.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "FOOTNOTES"
+.IX Header "FOOTNOTES"
+.IP "1." 4
+MS-DOS does not allow \f(CW\*(C`+\*(C'\fR characters in file names, so on
+MS-DOS this program is named \fB\s-1CXXFILT\s0\fR.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-dlltool.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-dlltool.1
new file mode 100644
index 0000000..0f254d5
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-dlltool.1
@@ -0,0 +1,538 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "DLLTOOL 1"
+.TH DLLTOOL 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+dlltool \- Create files needed to build and use DLLs.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+dlltool [\fB\-d\fR|\fB\-\-input\-def\fR \fIdef-file-name\fR]
+        [\fB\-b\fR|\fB\-\-base\-file\fR \fIbase-file-name\fR]
+        [\fB\-e\fR|\fB\-\-output\-exp\fR \fIexports-file-name\fR]
+        [\fB\-z\fR|\fB\-\-output\-def\fR \fIdef-file-name\fR]
+        [\fB\-l\fR|\fB\-\-output\-lib\fR \fIlibrary-file-name\fR]
+        [\fB\-y\fR|\fB\-\-output\-delaylib\fR \fIlibrary-file-name\fR]
+        [\fB\-\-export\-all\-symbols\fR] [\fB\-\-no\-export\-all\-symbols\fR]
+        [\fB\-\-exclude\-symbols\fR \fIlist\fR]
+        [\fB\-\-no\-default\-excludes\fR]
+        [\fB\-S\fR|\fB\-\-as\fR \fIpath-to-assembler\fR] [\fB\-f\fR|\fB\-\-as\-flags\fR \fIoptions\fR]
+        [\fB\-D\fR|\fB\-\-dllname\fR \fIname\fR] [\fB\-m\fR|\fB\-\-machine\fR \fImachine\fR]
+        [\fB\-a\fR|\fB\-\-add\-indirect\fR]
+        [\fB\-U\fR|\fB\-\-add\-underscore\fR] [\fB\-\-add\-stdcall\-underscore\fR]
+        [\fB\-k\fR|\fB\-\-kill\-at\fR] [\fB\-A\fR|\fB\-\-add\-stdcall\-alias\fR]
+        [\fB\-p\fR|\fB\-\-ext\-prefix\-alias\fR \fIprefix\fR]
+        [\fB\-x\fR|\fB\-\-no\-idata4\fR] [\fB\-c\fR|\fB\-\-no\-idata5\fR]
+        [\fB\-\-use\-nul\-prefixed\-import\-tables\fR]
+        [\fB\-I\fR|\fB\-\-identify\fR \fIlibrary-file-name\fR] [\fB\-\-identify\-strict\fR]
+        [\fB\-i\fR|\fB\-\-interwork\fR]
+        [\fB\-n\fR|\fB\-\-nodelete\fR] [\fB\-t\fR|\fB\-\-temp\-prefix\fR \fIprefix\fR]
+        [\fB\-v\fR|\fB\-\-verbose\fR]
+        [\fB\-h\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR]
+        [\fB\-\-no\-leading\-underscore\fR] [\fB\-\-leading\-underscore\fR]
+        [object\-file ...]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBdlltool\fR reads its inputs, which can come from the \fB\-d\fR and
+\&\fB\-b\fR options as well as object files specified on the command
+line.  It then processes these inputs and if the \fB\-e\fR option has
+been specified it creates a exports file.  If the \fB\-l\fR option
+has been specified it creates a library file and if the \fB\-z\fR option
+has been specified it creates a def file.  Any or all of the \fB\-e\fR,
+\&\fB\-l\fR and \fB\-z\fR options can be present in one invocation of
+dlltool.
+.PP
+When creating a \s-1DLL,\s0 along with the source for the \s-1DLL,\s0 it is necessary
+to have three other files.  \fBdlltool\fR can help with the creation of
+these files.
+.PP
+The first file is a \fI.def\fR file which specifies which functions are
+exported from the \s-1DLL,\s0 which functions the \s-1DLL\s0 imports, and so on.  This
+is a text file and can be created by hand, or \fBdlltool\fR can be used
+to create it using the \fB\-z\fR option.  In this case \fBdlltool\fR
+will scan the object files specified on its command line looking for
+those functions which have been specially marked as being exported and
+put entries for them in the \fI.def\fR file it creates.
+.PP
+In order to mark a function as being exported from a \s-1DLL,\s0 it needs to
+have an \fB\-export:<name_of_function>\fR entry in the \fB.drectve\fR
+section of the object file.  This can be done in C by using the
+\&\fIasm()\fR operator:
+.PP
+.Vb 2
+\&          asm (".section .drectve");
+\&          asm (".ascii \e"\-export:my_func\e"");
+\&        
+\&          int my_func (void) { ... }
+.Ve
+.PP
+The second file needed for \s-1DLL\s0 creation is an exports file.  This file
+is linked with the object files that make up the body of the \s-1DLL\s0 and it
+handles the interface between the \s-1DLL\s0 and the outside world.  This is a
+binary file and it can be created by giving the \fB\-e\fR option to
+\&\fBdlltool\fR when it is creating or reading in a \fI.def\fR file.
+.PP
+The third file needed for \s-1DLL\s0 creation is the library file that programs
+will link with in order to access the functions in the \s-1DLL \s0(an `import
+library').  This file can be created by giving the \fB\-l\fR option to
+dlltool when it is creating or reading in a \fI.def\fR file.
+.PP
+If the \fB\-y\fR option is specified, dlltool generates a delay-import
+library that can be used instead of the normal import library to allow
+a program to link to the dll only as soon as an imported function is
+called for the first time. The resulting executable will need to be
+linked to the static delayimp library containing _\|\fI_delayLoadHelper2()\fR,
+which in turn will import LoadLibraryA and GetProcAddress from kernel32.
+.PP
+\&\fBdlltool\fR builds the library file by hand, but it builds the
+exports file by creating temporary files containing assembler statements
+and then assembling these.  The \fB\-S\fR command line option can be
+used to specify the path to the assembler that dlltool will use,
+and the \fB\-f\fR option can be used to pass specific flags to that
+assembler.  The \fB\-n\fR can be used to prevent dlltool from deleting
+these temporary assembler files when it is done, and if \fB\-n\fR is
+specified twice then this will prevent dlltool from deleting the
+temporary object files it used to build the library.
+.PP
+Here is an example of creating a \s-1DLL\s0 from a source file \fBdll.c\fR and
+also creating a program (from an object file called \fBprogram.o\fR)
+that uses that \s-1DLL:\s0
+.PP
+.Vb 4
+\&          gcc \-c dll.c
+\&          dlltool \-e exports.o \-l dll.lib dll.o
+\&          gcc dll.o exports.o \-o dll.dll
+\&          gcc program.o dll.lib \-o program
+.Ve
+.PP
+\&\fBdlltool\fR may also be used to query an existing import library
+to determine the name of the \s-1DLL\s0 to which it is associated.  See the
+description of the \fB\-I\fR or \fB\-\-identify\fR option.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The command line options have the following meanings:
+.IP "\fB\-d\fR \fIfilename\fR" 4
+.IX Item "-d filename"
+.PD 0
+.IP "\fB\-\-input\-def\fR \fIfilename\fR" 4
+.IX Item "--input-def filename"
+.PD
+Specifies the name of a \fI.def\fR file to be read in and processed.
+.IP "\fB\-b\fR \fIfilename\fR" 4
+.IX Item "-b filename"
+.PD 0
+.IP "\fB\-\-base\-file\fR \fIfilename\fR" 4
+.IX Item "--base-file filename"
+.PD
+Specifies the name of a base file to be read in and processed.  The
+contents of this file will be added to the relocation section in the
+exports file generated by dlltool.
+.IP "\fB\-e\fR \fIfilename\fR" 4
+.IX Item "-e filename"
+.PD 0
+.IP "\fB\-\-output\-exp\fR \fIfilename\fR" 4
+.IX Item "--output-exp filename"
+.PD
+Specifies the name of the export file to be created by dlltool.
+.IP "\fB\-z\fR \fIfilename\fR" 4
+.IX Item "-z filename"
+.PD 0
+.IP "\fB\-\-output\-def\fR \fIfilename\fR" 4
+.IX Item "--output-def filename"
+.PD
+Specifies the name of the \fI.def\fR file to be created by dlltool.
+.IP "\fB\-l\fR \fIfilename\fR" 4
+.IX Item "-l filename"
+.PD 0
+.IP "\fB\-\-output\-lib\fR \fIfilename\fR" 4
+.IX Item "--output-lib filename"
+.PD
+Specifies the name of the library file to be created by dlltool.
+.IP "\fB\-y\fR \fIfilename\fR" 4
+.IX Item "-y filename"
+.PD 0
+.IP "\fB\-\-output\-delaylib\fR \fIfilename\fR" 4
+.IX Item "--output-delaylib filename"
+.PD
+Specifies the name of the delay-import library file to be created by dlltool.
+.IP "\fB\-\-export\-all\-symbols\fR" 4
+.IX Item "--export-all-symbols"
+Treat all global and weak defined symbols found in the input object
+files as symbols to be exported.  There is a small list of symbols which
+are not exported by default; see the \fB\-\-no\-default\-excludes\fR
+option.  You may add to the list of symbols to not export by using the
+\&\fB\-\-exclude\-symbols\fR option.
+.IP "\fB\-\-no\-export\-all\-symbols\fR" 4
+.IX Item "--no-export-all-symbols"
+Only export symbols explicitly listed in an input \fI.def\fR file or in
+\&\fB.drectve\fR sections in the input object files.  This is the default
+behaviour.  The \fB.drectve\fR sections are created by \fBdllexport\fR
+attributes in the source code.
+.IP "\fB\-\-exclude\-symbols\fR \fIlist\fR" 4
+.IX Item "--exclude-symbols list"
+Do not export the symbols in \fIlist\fR.  This is a list of symbol names
+separated by comma or colon characters.  The symbol names should not
+contain a leading underscore.  This is only meaningful when
+\&\fB\-\-export\-all\-symbols\fR is used.
+.IP "\fB\-\-no\-default\-excludes\fR" 4
+.IX Item "--no-default-excludes"
+When \fB\-\-export\-all\-symbols\fR is used, it will by default avoid
+exporting certain special symbols.  The current list of symbols to avoid
+exporting is \fBDllMain@12\fR, \fBDllEntryPoint@0\fR,
+\&\fBimpure_ptr\fR.  You may use the \fB\-\-no\-default\-excludes\fR option
+to go ahead and export these special symbols.  This is only meaningful
+when \fB\-\-export\-all\-symbols\fR is used.
+.IP "\fB\-S\fR \fIpath\fR" 4
+.IX Item "-S path"
+.PD 0
+.IP "\fB\-\-as\fR \fIpath\fR" 4
+.IX Item "--as path"
+.PD
+Specifies the path, including the filename, of the assembler to be used
+to create the exports file.
+.IP "\fB\-f\fR \fIoptions\fR" 4
+.IX Item "-f options"
+.PD 0
+.IP "\fB\-\-as\-flags\fR \fIoptions\fR" 4
+.IX Item "--as-flags options"
+.PD
+Specifies any specific command line options to be passed to the
+assembler when building the exports file.  This option will work even if
+the \fB\-S\fR option is not used.  This option only takes one argument,
+and if it occurs more than once on the command line, then later
+occurrences will override earlier occurrences.  So if it is necessary to
+pass multiple options to the assembler they should be enclosed in
+double quotes.
+.IP "\fB\-D\fR \fIname\fR" 4
+.IX Item "-D name"
+.PD 0
+.IP "\fB\-\-dll\-name\fR \fIname\fR" 4
+.IX Item "--dll-name name"
+.PD
+Specifies the name to be stored in the \fI.def\fR file as the name of
+the \s-1DLL\s0 when the \fB\-e\fR option is used.  If this option is not
+present, then the filename given to the \fB\-e\fR option will be
+used as the name of the \s-1DLL.\s0
+.IP "\fB\-m\fR \fImachine\fR" 4
+.IX Item "-m machine"
+.PD 0
+.IP "\fB\-machine\fR \fImachine\fR" 4
+.IX Item "-machine machine"
+.PD
+Specifies the type of machine for which the library file should be
+built.  \fBdlltool\fR has a built in default type, depending upon how
+it was created, but this option can be used to override that.  This is
+normally only useful when creating DLLs for an \s-1ARM\s0 processor, when the
+contents of the \s-1DLL\s0 are actually encode using Thumb instructions.
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-add\-indirect\fR" 4
+.IX Item "--add-indirect"
+.PD
+Specifies that when \fBdlltool\fR is creating the exports file it
+should add a section which allows the exported functions to be
+referenced without using the import library.  Whatever the hell that
+means!
+.IP "\fB\-U\fR" 4
+.IX Item "-U"
+.PD 0
+.IP "\fB\-\-add\-underscore\fR" 4
+.IX Item "--add-underscore"
+.PD
+Specifies that when \fBdlltool\fR is creating the exports file it
+should prepend an underscore to the names of \fIall\fR exported symbols.
+.IP "\fB\-\-no\-leading\-underscore\fR" 4
+.IX Item "--no-leading-underscore"
+.PD 0
+.IP "\fB\-\-leading\-underscore\fR" 4
+.IX Item "--leading-underscore"
+.PD
+Specifies whether standard symbol should be forced to be prefixed, or
+not.
+.IP "\fB\-\-add\-stdcall\-underscore\fR" 4
+.IX Item "--add-stdcall-underscore"
+Specifies that when \fBdlltool\fR is creating the exports file it
+should prepend an underscore to the names of exported \fIstdcall\fR
+functions. Variable names and non-stdcall function names are not modified.
+This option is useful when creating GNU-compatible import libs for third
+party DLLs that were built with MS-Windows tools.
+.IP "\fB\-k\fR" 4
+.IX Item "-k"
+.PD 0
+.IP "\fB\-\-kill\-at\fR" 4
+.IX Item "--kill-at"
+.PD
+Specifies that \fB@<number>\fR suffixes should be omitted from the names
+of stdcall functions that will be imported from the \s-1DLL. \s0 This is
+useful when creating an import library for a \s-1DLL\s0 which exports stdcall
+functions but without the usual \fB@<number>\fR symbol name suffix.
+.Sp
+This does not change the naming of symbols provided by the import library
+to programs linked against it, but only the entries in the import table
+(ie the .idata section).
+.IP "\fB\-A\fR" 4
+.IX Item "-A"
+.PD 0
+.IP "\fB\-\-add\-stdcall\-alias\fR" 4
+.IX Item "--add-stdcall-alias"
+.PD
+Specifies that when \fBdlltool\fR is creating the exports file it
+should add aliases for stdcall symbols without \fB@ <number>\fR
+in addition to the symbols with \fB@ <number>\fR.
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-ext\-prefix\-alias\fR \fIprefix\fR" 4
+.IX Item "--ext-prefix-alias prefix"
+.PD
+Causes \fBdlltool\fR to create external aliases for all \s-1DLL\s0
+imports with the specified prefix.  The aliases are created for both
+external and import symbols with no leading underscore.
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+.PD 0
+.IP "\fB\-\-no\-idata4\fR" 4
+.IX Item "--no-idata4"
+.PD
+Specifies that when \fBdlltool\fR is creating the exports and library
+files it should omit the \f(CW\*(C`.idata4\*(C'\fR section.  This is for compatibility
+with certain operating systems.
+.IP "\fB\-\-use\-nul\-prefixed\-import\-tables\fR" 4
+.IX Item "--use-nul-prefixed-import-tables"
+Specifies that when \fBdlltool\fR is creating the exports and library
+files it should prefix the \f(CW\*(C`.idata4\*(C'\fR and \f(CW\*(C`.idata5\*(C'\fR by zero an
+element. This emulates old gnu import library generation of
+\&\f(CW\*(C`dlltool\*(C'\fR. By default this option is turned off.
+.IP "\fB\-c\fR" 4
+.IX Item "-c"
+.PD 0
+.IP "\fB\-\-no\-idata5\fR" 4
+.IX Item "--no-idata5"
+.PD
+Specifies that when \fBdlltool\fR is creating the exports and library
+files it should omit the \f(CW\*(C`.idata5\*(C'\fR section.  This is for compatibility
+with certain operating systems.
+.IP "\fB\-I\fR \fIfilename\fR" 4
+.IX Item "-I filename"
+.PD 0
+.IP "\fB\-\-identify\fR \fIfilename\fR" 4
+.IX Item "--identify filename"
+.PD
+Specifies that \fBdlltool\fR should inspect the import library
+indicated by \fIfilename\fR and report, on \f(CW\*(C`stdout\*(C'\fR, the name(s)
+of the associated \s-1DLL\s0(s).  This can be performed in addition to any
+other operations indicated by the other options and arguments.
+\&\fBdlltool\fR fails if the import library does not exist or is not
+actually an import library. See also \fB\-\-identify\-strict\fR.
+.IP "\fB\-\-identify\-strict\fR" 4
+.IX Item "--identify-strict"
+Modifies the behavior of the \fB\-\-identify\fR option, such
+that an error is reported if \fIfilename\fR is associated with
+more than one \s-1DLL.\s0
+.IP "\fB\-i\fR" 4
+.IX Item "-i"
+.PD 0
+.IP "\fB\-\-interwork\fR" 4
+.IX Item "--interwork"
+.PD
+Specifies that \fBdlltool\fR should mark the objects in the library
+file and exports file that it produces as supporting interworking
+between \s-1ARM\s0 and Thumb code.
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+.PD 0
+.IP "\fB\-\-nodelete\fR" 4
+.IX Item "--nodelete"
+.PD
+Makes \fBdlltool\fR preserve the temporary assembler files it used to
+create the exports file.  If this option is repeated then dlltool will
+also preserve the temporary object files it uses to create the library
+file.
+.IP "\fB\-t\fR \fIprefix\fR" 4
+.IX Item "-t prefix"
+.PD 0
+.IP "\fB\-\-temp\-prefix\fR \fIprefix\fR" 4
+.IX Item "--temp-prefix prefix"
+.PD
+Makes \fBdlltool\fR use \fIprefix\fR when constructing the names of
+temporary assembler and object files.  By default, the temp file prefix
+is generated from the pid.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-verbose\fR" 4
+.IX Item "--verbose"
+.PD
+Make dlltool describe what it is doing.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Displays a list of command line options and then exits.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Displays dlltool's version number and then exits.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+The Info pages for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-elfedit.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-elfedit.1
new file mode 100644
index 0000000..c2ed381
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-elfedit.1
@@ -0,0 +1,238 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "ELFEDIT 1"
+.TH ELFEDIT 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+elfedit \- Update the ELF header of ELF files.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+elfedit [\fB\-\-input\-mach=\fR\fImachine\fR]
+        [\fB\-\-input\-type=\fR\fItype\fR]
+        [\fB\-\-input\-osabi=\fR\fIosabi\fR]
+        \fB\-\-output\-mach=\fR\fImachine\fR
+        \fB\-\-output\-type=\fR\fItype\fR
+        \fB\-\-output\-osabi=\fR\fIosabi\fR
+        [\fB\-v\fR|\fB\-\-version\fR]
+        [\fB\-h\fR|\fB\-\-help\fR]
+        \fIelffile\fR...
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBelfedit\fR updates the \s-1ELF\s0 header of \s-1ELF\s0 files which have
+the matching \s-1ELF\s0 machine and file types.  The options control how and
+which fields in the \s-1ELF\s0 header should be updated.
+.PP
+\&\fIelffile\fR... are the \s-1ELF\s0 files to be updated.  32\-bit and
+64\-bit \s-1ELF\s0 files are supported, as are archives containing \s-1ELF\s0 files.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The long and short forms of options, shown here as alternatives, are
+equivalent. At least one of the \fB\-\-output\-mach\fR,
+\&\fB\-\-output\-type\fR and \fB\-\-output\-osabi\fR options must be given.
+.IP "\fB\-\-input\-mach=\fR\fImachine\fR" 4
+.IX Item "--input-mach=machine"
+Set the matching input \s-1ELF\s0 machine type to \fImachine\fR.  If
+\&\fB\-\-input\-mach\fR isn't specified, it will match any \s-1ELF\s0
+machine types.
+.Sp
+The supported \s-1ELF\s0 machine types are, \fIi386\fR, \fI\s-1IAMCU\s0\fR, \fIL1OM\fR,
+\&\fIK1OM\fR and \fIx86\-64\fR.
+.IP "\fB\-\-output\-mach=\fR\fImachine\fR" 4
+.IX Item "--output-mach=machine"
+Change the \s-1ELF\s0 machine type in the \s-1ELF\s0 header to \fImachine\fR.  The
+supported \s-1ELF\s0 machine types are the same as \fB\-\-input\-mach\fR.
+.IP "\fB\-\-input\-type=\fR\fItype\fR" 4
+.IX Item "--input-type=type"
+Set the matching input \s-1ELF\s0 file type to \fItype\fR.  If
+\&\fB\-\-input\-type\fR isn't specified, it will match any \s-1ELF\s0 file types.
+.Sp
+The supported \s-1ELF\s0 file types are, \fIrel\fR, \fIexec\fR and \fIdyn\fR.
+.IP "\fB\-\-output\-type=\fR\fItype\fR" 4
+.IX Item "--output-type=type"
+Change the \s-1ELF\s0 file type in the \s-1ELF\s0 header to \fItype\fR.  The
+supported \s-1ELF\s0 types are the same as \fB\-\-input\-type\fR.
+.IP "\fB\-\-input\-osabi=\fR\fIosabi\fR" 4
+.IX Item "--input-osabi=osabi"
+Set the matching input \s-1ELF\s0 file \s-1OSABI\s0 to \fIosabi\fR.  If
+\&\fB\-\-input\-osabi\fR isn't specified, it will match any \s-1ELF\s0 OSABIs.
+.Sp
+The supported \s-1ELF\s0 OSABIs are, \fInone\fR, \fI\s-1HPUX\s0\fR, \fINetBSD\fR,
+\&\fI\s-1GNU\s0\fR, \fILinux\fR (alias for \fI\s-1GNU\s0\fR),
+\&\fISolaris\fR, \fI\s-1AIX\s0\fR, \fIIrix\fR,
+\&\fIFreeBSD\fR, \fI\s-1TRU64\s0\fR, \fIModesto\fR, \fIOpenBSD\fR, \fIOpenVMS\fR,
+\&\fI\s-1NSK\s0\fR, \fI\s-1AROS\s0\fR and \fIFenixOS\fR.
+.IP "\fB\-\-output\-osabi=\fR\fIosabi\fR" 4
+.IX Item "--output-osabi=osabi"
+Change the \s-1ELF OSABI\s0 in the \s-1ELF\s0 header to \fIosabi\fR.  The
+supported \s-1ELF OSABI\s0 are the same as \fB\-\-input\-osabi\fR.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Display the version number of \fBelfedit\fR.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Display the command line options understood by \fBelfedit\fR.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-gprof.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-gprof.1
new file mode 100644
index 0000000..a77b9d8
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-gprof.1
@@ -0,0 +1,768 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "GPROF 1"
+.TH GPROF 1 "2020-04-01" "binutils-2.27.0" "GNU"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+gprof \- display call graph profile data
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+gprof [ \-[abcDhilLrsTvwxyz] ] [ \-[ACeEfFJnNOpPqQZ][\fIname\fR] ]
+ [ \-I \fIdirs\fR ] [ \-d[\fInum\fR] ] [ \-k \fIfrom/to\fR ]
+ [ \-m \fImin-count\fR ] [ \-R \fImap_file\fR ] [ \-t \fItable-length\fR ]
+ [ \-\-[no\-]annotated\-source[=\fIname\fR] ]
+ [ \-\-[no\-]exec\-counts[=\fIname\fR] ]
+ [ \-\-[no\-]flat\-profile[=\fIname\fR] ] [ \-\-[no\-]graph[=\fIname\fR] ]
+ [ \-\-[no\-]time=\fIname\fR] [ \-\-all\-lines ] [ \-\-brief ]
+ [ \-\-debug[=\fIlevel\fR] ] [ \-\-function\-ordering ]
+ [ \-\-file\-ordering \fImap_file\fR ] [ \-\-directory\-path=\fIdirs\fR ]
+ [ \-\-display\-unused\-functions ] [ \-\-file\-format=\fIname\fR ]
+ [ \-\-file\-info ] [ \-\-help ] [ \-\-line ] [ \-\-inline\-file\-names ]
+ [ \-\-min\-count=\fIn\fR ] [ \-\-no\-static ] [ \-\-print\-path ]
+ [ \-\-separate\-files ] [ \-\-static\-call\-graph ] [ \-\-sum ]
+ [ \-\-table\-length=\fIlen\fR ] [ \-\-traditional ] [ \-\-version ]
+ [ \-\-width=\fIn\fR ] [ \-\-ignore\-non\-functions ]
+ [ \-\-demangle[=\fI\s-1STYLE\s0\fR] ] [ \-\-no\-demangle ]
+ [\-\-external\-symbol\-table=name]
+ [ \fIimage-file\fR ] [ \fIprofile-file\fR ... ]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\f(CW\*(C`gprof\*(C'\fR produces an execution profile of C, Pascal, or Fortran77
+programs.  The effect of called routines is incorporated in the profile
+of each caller.  The profile data is taken from the call graph profile file
+(\fIgmon.out\fR default) which is created by programs
+that are compiled with the \fB\-pg\fR option of
+\&\f(CW\*(C`cc\*(C'\fR, \f(CW\*(C`pc\*(C'\fR, and \f(CW\*(C`f77\*(C'\fR.
+The \fB\-pg\fR option also links in versions of the library routines
+that are compiled for profiling.  \f(CW\*(C`Gprof\*(C'\fR reads the given object
+file (the default is \f(CW\*(C`a.out\*(C'\fR) and establishes the relation between
+its symbol table and the call graph profile from \fIgmon.out\fR.
+If more than one profile file is specified, the \f(CW\*(C`gprof\*(C'\fR
+output shows the sum of the profile information in the given profile files.
+.PP
+\&\f(CW\*(C`Gprof\*(C'\fR calculates the amount of time spent in each routine.
+Next, these times are propagated along the edges of the call graph.
+Cycles are discovered, and calls into a cycle are made to share the time
+of the cycle.
+.PP
+Several forms of output are available from the analysis.
+.PP
+The \fIflat profile\fR shows how much time your program spent in each function,
+and how many times that function was called.  If you simply want to know
+which functions burn most of the cycles, it is stated concisely here.
+.PP
+The \fIcall graph\fR shows, for each function, which functions called it, which
+other functions it called, and how many times.  There is also an estimate
+of how much time was spent in the subroutines of each function.  This can
+suggest places where you might try to eliminate function calls that use a
+lot of time.
+.PP
+The \fIannotated source\fR listing is a copy of the program's
+source code, labeled with the number of times each line of the
+program was executed.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+These options specify which of several output formats
+\&\f(CW\*(C`gprof\*(C'\fR should produce.
+.PP
+Many of these options take an optional \fIsymspec\fR to specify
+functions to be included or excluded.  These options can be
+specified multiple times, with different symspecs, to include
+or exclude sets of symbols.
+.PP
+Specifying any of these options overrides the default (\fB\-p \-q\fR),
+which prints a flat profile and call graph analysis
+for all functions.
+.ie n .IP """\-A[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-A[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-A[symspec]"
+.PD 0
+.ie n .IP """\-\-annotated\-source[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-annotated\-source[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--annotated-source[=symspec]"
+.PD
+The \fB\-A\fR option causes \f(CW\*(C`gprof\*(C'\fR to print annotated source code.
+If \fIsymspec\fR is specified, print output only for matching symbols.
+.ie n .IP """\-b""" 4
+.el .IP "\f(CW\-b\fR" 4
+.IX Item "-b"
+.PD 0
+.ie n .IP """\-\-brief""" 4
+.el .IP "\f(CW\-\-brief\fR" 4
+.IX Item "--brief"
+.PD
+If the \fB\-b\fR option is given, \f(CW\*(C`gprof\*(C'\fR doesn't print the
+verbose blurbs that try to explain the meaning of all of the fields in
+the tables.  This is useful if you intend to print out the output, or
+are tired of seeing the blurbs.
+.ie n .IP """\-C[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-C[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-C[symspec]"
+.PD 0
+.ie n .IP """\-\-exec\-counts[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-exec\-counts[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--exec-counts[=symspec]"
+.PD
+The \fB\-C\fR option causes \f(CW\*(C`gprof\*(C'\fR to
+print a tally of functions and the number of times each was called.
+If \fIsymspec\fR is specified, print tally only for matching symbols.
+.Sp
+If the profile data file contains basic-block count records, specifying
+the \fB\-l\fR option, along with \fB\-C\fR, will cause basic-block
+execution counts to be tallied and displayed.
+.ie n .IP """\-i""" 4
+.el .IP "\f(CW\-i\fR" 4
+.IX Item "-i"
+.PD 0
+.ie n .IP """\-\-file\-info""" 4
+.el .IP "\f(CW\-\-file\-info\fR" 4
+.IX Item "--file-info"
+.PD
+The \fB\-i\fR option causes \f(CW\*(C`gprof\*(C'\fR to display summary information
+about the profile data file(s) and then exit.  The number of histogram,
+call graph, and basic-block count records is displayed.
+.ie n .IP """\-I \f(CIdirs\f(CW""" 4
+.el .IP "\f(CW\-I \f(CIdirs\f(CW\fR" 4
+.IX Item "-I dirs"
+.PD 0
+.ie n .IP """\-\-directory\-path=\f(CIdirs\f(CW""" 4
+.el .IP "\f(CW\-\-directory\-path=\f(CIdirs\f(CW\fR" 4
+.IX Item "--directory-path=dirs"
+.PD
+The \fB\-I\fR option specifies a list of search directories in
+which to find source files.  Environment variable \fI\s-1GPROF_PATH\s0\fR
+can also be used to convey this information.
+Used mostly for annotated source output.
+.ie n .IP """\-J[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-J[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-J[symspec]"
+.PD 0
+.ie n .IP """\-\-no\-annotated\-source[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-no\-annotated\-source[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--no-annotated-source[=symspec]"
+.PD
+The \fB\-J\fR option causes \f(CW\*(C`gprof\*(C'\fR not to
+print annotated source code.
+If \fIsymspec\fR is specified, \f(CW\*(C`gprof\*(C'\fR prints annotated source,
+but excludes matching symbols.
+.ie n .IP """\-L""" 4
+.el .IP "\f(CW\-L\fR" 4
+.IX Item "-L"
+.PD 0
+.ie n .IP """\-\-print\-path""" 4
+.el .IP "\f(CW\-\-print\-path\fR" 4
+.IX Item "--print-path"
+.PD
+Normally, source filenames are printed with the path
+component suppressed.  The \fB\-L\fR option causes \f(CW\*(C`gprof\*(C'\fR
+to print the full pathname of
+source filenames, which is determined
+from symbolic debugging information in the image file
+and is relative to the directory in which the compiler
+was invoked.
+.ie n .IP """\-p[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-p[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-p[symspec]"
+.PD 0
+.ie n .IP """\-\-flat\-profile[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-flat\-profile[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--flat-profile[=symspec]"
+.PD
+The \fB\-p\fR option causes \f(CW\*(C`gprof\*(C'\fR to print a flat profile.
+If \fIsymspec\fR is specified, print flat profile only for matching symbols.
+.ie n .IP """\-P[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-P[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-P[symspec]"
+.PD 0
+.ie n .IP """\-\-no\-flat\-profile[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-no\-flat\-profile[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--no-flat-profile[=symspec]"
+.PD
+The \fB\-P\fR option causes \f(CW\*(C`gprof\*(C'\fR to suppress printing a flat profile.
+If \fIsymspec\fR is specified, \f(CW\*(C`gprof\*(C'\fR prints a flat profile,
+but excludes matching symbols.
+.ie n .IP """\-q[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-q[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-q[symspec]"
+.PD 0
+.ie n .IP """\-\-graph[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-graph[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--graph[=symspec]"
+.PD
+The \fB\-q\fR option causes \f(CW\*(C`gprof\*(C'\fR to print the call graph analysis.
+If \fIsymspec\fR is specified, print call graph only for matching symbols
+and their children.
+.ie n .IP """\-Q[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-Q[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-Q[symspec]"
+.PD 0
+.ie n .IP """\-\-no\-graph[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-no\-graph[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--no-graph[=symspec]"
+.PD
+The \fB\-Q\fR option causes \f(CW\*(C`gprof\*(C'\fR to suppress printing the
+call graph.
+If \fIsymspec\fR is specified, \f(CW\*(C`gprof\*(C'\fR prints a call graph,
+but excludes matching symbols.
+.ie n .IP """\-t""" 4
+.el .IP "\f(CW\-t\fR" 4
+.IX Item "-t"
+.PD 0
+.ie n .IP """\-\-table\-length=\f(CInum\f(CW""" 4
+.el .IP "\f(CW\-\-table\-length=\f(CInum\f(CW\fR" 4
+.IX Item "--table-length=num"
+.PD
+The \fB\-t\fR option causes the \fInum\fR most active source lines in
+each source file to be listed when source annotation is enabled.  The
+default is 10.
+.ie n .IP """\-y""" 4
+.el .IP "\f(CW\-y\fR" 4
+.IX Item "-y"
+.PD 0
+.ie n .IP """\-\-separate\-files""" 4
+.el .IP "\f(CW\-\-separate\-files\fR" 4
+.IX Item "--separate-files"
+.PD
+This option affects annotated source output only.
+Normally, \f(CW\*(C`gprof\*(C'\fR prints annotated source files
+to standard-output.  If this option is specified,
+annotated source for a file named \fIpath/\fIfilename\fI\fR
+is generated in the file \fI\fIfilename\fI\-ann\fR.  If the underlying
+file system would truncate \fI\fIfilename\fI\-ann\fR so that it
+overwrites the original \fI\fIfilename\fI\fR, \f(CW\*(C`gprof\*(C'\fR generates
+annotated source in the file \fI\fIfilename\fI.ann\fR instead (if the
+original file name has an extension, that extension is \fIreplaced\fR
+with \fI.ann\fR).
+.ie n .IP """\-Z[\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-Z[\f(CIsymspec\f(CW]\fR" 4
+.IX Item "-Z[symspec]"
+.PD 0
+.ie n .IP """\-\-no\-exec\-counts[=\f(CIsymspec\f(CW]""" 4
+.el .IP "\f(CW\-\-no\-exec\-counts[=\f(CIsymspec\f(CW]\fR" 4
+.IX Item "--no-exec-counts[=symspec]"
+.PD
+The \fB\-Z\fR option causes \f(CW\*(C`gprof\*(C'\fR not to
+print a tally of functions and the number of times each was called.
+If \fIsymspec\fR is specified, print tally, but exclude matching symbols.
+.ie n .IP """\-r""" 4
+.el .IP "\f(CW\-r\fR" 4
+.IX Item "-r"
+.PD 0
+.ie n .IP """\-\-function\-ordering""" 4
+.el .IP "\f(CW\-\-function\-ordering\fR" 4
+.IX Item "--function-ordering"
+.PD
+The \fB\-\-function\-ordering\fR option causes \f(CW\*(C`gprof\*(C'\fR to print a
+suggested function ordering for the program based on profiling data.
+This option suggests an ordering which may improve paging, tlb and
+cache behavior for the program on systems which support arbitrary
+ordering of functions in an executable.
+.Sp
+The exact details of how to force the linker to place functions
+in a particular order is system dependent and out of the scope of this
+manual.
+.ie n .IP """\-R \f(CImap_file\f(CW""" 4
+.el .IP "\f(CW\-R \f(CImap_file\f(CW\fR" 4
+.IX Item "-R map_file"
+.PD 0
+.ie n .IP """\-\-file\-ordering \f(CImap_file\f(CW""" 4
+.el .IP "\f(CW\-\-file\-ordering \f(CImap_file\f(CW\fR" 4
+.IX Item "--file-ordering map_file"
+.PD
+The \fB\-\-file\-ordering\fR option causes \f(CW\*(C`gprof\*(C'\fR to print a
+suggested .o link line ordering for the program based on profiling data.
+This option suggests an ordering which may improve paging, tlb and
+cache behavior for the program on systems which do not support arbitrary
+ordering of functions in an executable.
+.Sp
+Use of the \fB\-a\fR argument is highly recommended with this option.
+.Sp
+The \fImap_file\fR argument is a pathname to a file which provides
+function name to object file mappings.  The format of the file is similar to
+the output of the program \f(CW\*(C`nm\*(C'\fR.
+.Sp
+.Vb 8
+\&        c\-parse.o:00000000 T yyparse
+\&        c\-parse.o:00000004 C yyerrflag
+\&        c\-lang.o:00000000 T maybe_objc_method_name
+\&        c\-lang.o:00000000 T print_lang_statistics
+\&        c\-lang.o:00000000 T recognize_objc_keyword
+\&        c\-decl.o:00000000 T print_lang_identifier
+\&        c\-decl.o:00000000 T print_lang_type
+\&        ...
+.Ve
+.Sp
+To create a \fImap_file\fR with \s-1GNU \s0\f(CW\*(C`nm\*(C'\fR, type a command like
+\&\f(CW\*(C`nm \-\-extern\-only \-\-defined\-only \-v \-\-print\-file\-name program\-name\*(C'\fR.
+.ie n .IP """\-T""" 4
+.el .IP "\f(CW\-T\fR" 4
+.IX Item "-T"
+.PD 0
+.ie n .IP """\-\-traditional""" 4
+.el .IP "\f(CW\-\-traditional\fR" 4
+.IX Item "--traditional"
+.PD
+The \fB\-T\fR option causes \f(CW\*(C`gprof\*(C'\fR to print its output in
+\&\*(L"traditional\*(R" \s-1BSD\s0 style.
+.ie n .IP """\-w \f(CIwidth\f(CW""" 4
+.el .IP "\f(CW\-w \f(CIwidth\f(CW\fR" 4
+.IX Item "-w width"
+.PD 0
+.ie n .IP """\-\-width=\f(CIwidth\f(CW""" 4
+.el .IP "\f(CW\-\-width=\f(CIwidth\f(CW\fR" 4
+.IX Item "--width=width"
+.PD
+Sets width of output lines to \fIwidth\fR.
+Currently only used when printing the function index at the bottom
+of the call graph.
+.ie n .IP """\-x""" 4
+.el .IP "\f(CW\-x\fR" 4
+.IX Item "-x"
+.PD 0
+.ie n .IP """\-\-all\-lines""" 4
+.el .IP "\f(CW\-\-all\-lines\fR" 4
+.IX Item "--all-lines"
+.PD
+This option affects annotated source output only.
+By default, only the lines at the beginning of a basic-block
+are annotated.  If this option is specified, every line in
+a basic-block is annotated by repeating the annotation for the
+first line.  This behavior is similar to \f(CW\*(C`tcov\*(C'\fR's \fB\-a\fR.
+.ie n .IP """\-\-demangle[=\f(CIstyle\f(CW]""" 4
+.el .IP "\f(CW\-\-demangle[=\f(CIstyle\f(CW]\fR" 4
+.IX Item "--demangle[=style]"
+.PD 0
+.ie n .IP """\-\-no\-demangle""" 4
+.el .IP "\f(CW\-\-no\-demangle\fR" 4
+.IX Item "--no-demangle"
+.PD
+These options control whether \*(C+ symbol names should be demangled when
+printing output.  The default is to demangle symbols.  The
+\&\f(CW\*(C`\-\-no\-demangle\*(C'\fR option may be used to turn off demangling. Different
+compilers have different mangling styles.  The optional demangling style
+argument can be used to choose an appropriate demangling style for your
+compiler.
+.SS "Analysis Options"
+.IX Subsection "Analysis Options"
+.ie n .IP """\-a""" 4
+.el .IP "\f(CW\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.ie n .IP """\-\-no\-static""" 4
+.el .IP "\f(CW\-\-no\-static\fR" 4
+.IX Item "--no-static"
+.PD
+The \fB\-a\fR option causes \f(CW\*(C`gprof\*(C'\fR to suppress the printing of
+statically declared (private) functions.  (These are functions whose
+names are not listed as global, and which are not visible outside the
+file/function/block where they were defined.)  Time spent in these
+functions, calls to/from them, etc., will all be attributed to the
+function that was loaded directly before it in the executable file.
+This option affects both the flat profile and the call graph.
+.ie n .IP """\-c""" 4
+.el .IP "\f(CW\-c\fR" 4
+.IX Item "-c"
+.PD 0
+.ie n .IP """\-\-static\-call\-graph""" 4
+.el .IP "\f(CW\-\-static\-call\-graph\fR" 4
+.IX Item "--static-call-graph"
+.PD
+The \fB\-c\fR option causes the call graph of the program to be
+augmented by a heuristic which examines the text space of the object
+file and identifies function calls in the binary machine code.
+Since normal call graph records are only generated when functions are
+entered, this option identifies children that could have been called,
+but never were.  Calls to functions that were not compiled with
+profiling enabled are also identified, but only if symbol table
+entries are present for them.
+Calls to dynamic library routines are typically \fInot\fR found
+by this option.
+Parents or children identified via this heuristic
+are indicated in the call graph with call counts of \fB0\fR.
+.ie n .IP """\-D""" 4
+.el .IP "\f(CW\-D\fR" 4
+.IX Item "-D"
+.PD 0
+.ie n .IP """\-\-ignore\-non\-functions""" 4
+.el .IP "\f(CW\-\-ignore\-non\-functions\fR" 4
+.IX Item "--ignore-non-functions"
+.PD
+The \fB\-D\fR option causes \f(CW\*(C`gprof\*(C'\fR to ignore symbols which
+are not known to be functions.  This option will give more accurate
+profile data on systems where it is supported (Solaris and \s-1HPUX\s0 for
+example).
+.ie n .IP """\-k \f(CIfrom\f(CW/\f(CIto\f(CW""" 4
+.el .IP "\f(CW\-k \f(CIfrom\f(CW/\f(CIto\f(CW\fR" 4
+.IX Item "-k from/to"
+The \fB\-k\fR option allows you to delete from the call graph any arcs from
+symbols matching symspec \fIfrom\fR to those matching symspec \fIto\fR.
+.ie n .IP """\-l""" 4
+.el .IP "\f(CW\-l\fR" 4
+.IX Item "-l"
+.PD 0
+.ie n .IP """\-\-line""" 4
+.el .IP "\f(CW\-\-line\fR" 4
+.IX Item "--line"
+.PD
+The \fB\-l\fR option enables line-by-line profiling, which causes
+histogram hits to be charged to individual source code lines,
+instead of functions.  This feature only works with programs compiled
+by older versions of the \f(CW\*(C`gcc\*(C'\fR compiler.  Newer versions of
+\&\f(CW\*(C`gcc\*(C'\fR are designed to work with the \f(CW\*(C`gcov\*(C'\fR tool instead.
+.Sp
+If the program was compiled with basic-block counting enabled,
+this option will also identify how many times each line of
+code was executed.
+While line-by-line profiling can help isolate where in a large function
+a program is spending its time, it also significantly increases
+the running time of \f(CW\*(C`gprof\*(C'\fR, and magnifies statistical
+inaccuracies.
+.ie n .IP """\-\-inline\-file\-names""" 4
+.el .IP "\f(CW\-\-inline\-file\-names\fR" 4
+.IX Item "--inline-file-names"
+This option causes \f(CW\*(C`gprof\*(C'\fR to print the source file after each
+symbol in both the flat profile and the call graph. The full path to the
+file is printed if used with the \fB\-L\fR option.
+.ie n .IP """\-m \f(CInum\f(CW""" 4
+.el .IP "\f(CW\-m \f(CInum\f(CW\fR" 4
+.IX Item "-m num"
+.PD 0
+.ie n .IP """\-\-min\-count=\f(CInum\f(CW""" 4
+.el .IP "\f(CW\-\-min\-count=\f(CInum\f(CW\fR" 4
+.IX Item "--min-count=num"
+.PD
+This option affects execution count output only.
+Symbols that are executed less than \fInum\fR times are suppressed.
+.ie n .IP """\-n\f(CIsymspec\f(CW""" 4
+.el .IP "\f(CW\-n\f(CIsymspec\f(CW\fR" 4
+.IX Item "-nsymspec"
+.PD 0
+.ie n .IP """\-\-time=\f(CIsymspec\f(CW""" 4
+.el .IP "\f(CW\-\-time=\f(CIsymspec\f(CW\fR" 4
+.IX Item "--time=symspec"
+.PD
+The \fB\-n\fR option causes \f(CW\*(C`gprof\*(C'\fR, in its call graph analysis,
+to only propagate times for symbols matching \fIsymspec\fR.
+.ie n .IP """\-N\f(CIsymspec\f(CW""" 4
+.el .IP "\f(CW\-N\f(CIsymspec\f(CW\fR" 4
+.IX Item "-Nsymspec"
+.PD 0
+.ie n .IP """\-\-no\-time=\f(CIsymspec\f(CW""" 4
+.el .IP "\f(CW\-\-no\-time=\f(CIsymspec\f(CW\fR" 4
+.IX Item "--no-time=symspec"
+.PD
+The \fB\-n\fR option causes \f(CW\*(C`gprof\*(C'\fR, in its call graph analysis,
+not to propagate times for symbols matching \fIsymspec\fR.
+.ie n .IP """\-S\f(CIfilename\f(CW""" 4
+.el .IP "\f(CW\-S\f(CIfilename\f(CW\fR" 4
+.IX Item "-Sfilename"
+.PD 0
+.ie n .IP """\-\-external\-symbol\-table=\f(CIfilename\f(CW""" 4
+.el .IP "\f(CW\-\-external\-symbol\-table=\f(CIfilename\f(CW\fR" 4
+.IX Item "--external-symbol-table=filename"
+.PD
+The \fB\-S\fR option causes \f(CW\*(C`gprof\*(C'\fR to read an external symbol table
+file, such as \fI/proc/kallsyms\fR, rather than read the symbol table
+from the given object file (the default is \f(CW\*(C`a.out\*(C'\fR). This is useful
+for profiling kernel modules.
+.ie n .IP """\-z""" 4
+.el .IP "\f(CW\-z\fR" 4
+.IX Item "-z"
+.PD 0
+.ie n .IP """\-\-display\-unused\-functions""" 4
+.el .IP "\f(CW\-\-display\-unused\-functions\fR" 4
+.IX Item "--display-unused-functions"
+.PD
+If you give the \fB\-z\fR option, \f(CW\*(C`gprof\*(C'\fR will mention all
+functions in the flat profile, even those that were never called, and
+that had no time spent in them.  This is useful in conjunction with the
+\&\fB\-c\fR option for discovering which routines were never called.
+.SS "Miscellaneous Options"
+.IX Subsection "Miscellaneous Options"
+.ie n .IP """\-d[\f(CInum\f(CW]""" 4
+.el .IP "\f(CW\-d[\f(CInum\f(CW]\fR" 4
+.IX Item "-d[num]"
+.PD 0
+.ie n .IP """\-\-debug[=\f(CInum\f(CW]""" 4
+.el .IP "\f(CW\-\-debug[=\f(CInum\f(CW]\fR" 4
+.IX Item "--debug[=num]"
+.PD
+The \fB\-d\fR \fInum\fR option specifies debugging options.
+If \fInum\fR is not specified, enable all debugging.
+.ie n .IP """\-h""" 4
+.el .IP "\f(CW\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.ie n .IP """\-\-help""" 4
+.el .IP "\f(CW\-\-help\fR" 4
+.IX Item "--help"
+.PD
+The \fB\-h\fR option prints command line usage.
+.ie n .IP """\-O\f(CIname\f(CW""" 4
+.el .IP "\f(CW\-O\f(CIname\f(CW\fR" 4
+.IX Item "-Oname"
+.PD 0
+.ie n .IP """\-\-file\-format=\f(CIname\f(CW""" 4
+.el .IP "\f(CW\-\-file\-format=\f(CIname\f(CW\fR" 4
+.IX Item "--file-format=name"
+.PD
+Selects the format of the profile data files.  Recognized formats are
+\&\fBauto\fR (the default), \fBbsd\fR, \fB4.4bsd\fR, \fBmagic\fR, and
+\&\fBprof\fR (not yet supported).
+.ie n .IP """\-s""" 4
+.el .IP "\f(CW\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.ie n .IP """\-\-sum""" 4
+.el .IP "\f(CW\-\-sum\fR" 4
+.IX Item "--sum"
+.PD
+The \fB\-s\fR option causes \f(CW\*(C`gprof\*(C'\fR to summarize the information
+in the profile data files it read in, and write out a profile data
+file called \fIgmon.sum\fR, which contains all the information from
+the profile data files that \f(CW\*(C`gprof\*(C'\fR read in.  The file \fIgmon.sum\fR
+may be one of the specified input files; the effect of this is to
+merge the data in the other input files into \fIgmon.sum\fR.
+.Sp
+Eventually you can run \f(CW\*(C`gprof\*(C'\fR again without \fB\-s\fR to analyze the
+cumulative data in the file \fIgmon.sum\fR.
+.ie n .IP """\-v""" 4
+.el .IP "\f(CW\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.ie n .IP """\-\-version""" 4
+.el .IP "\f(CW\-\-version\fR" 4
+.IX Item "--version"
+.PD
+The \fB\-v\fR flag causes \f(CW\*(C`gprof\*(C'\fR to print the current version
+number, and then exit.
+.SS "Deprecated Options"
+.IX Subsection "Deprecated Options"
+These options have been replaced with newer versions that use symspecs.
+.ie n .IP """\-e \f(CIfunction_name\f(CW""" 4
+.el .IP "\f(CW\-e \f(CIfunction_name\f(CW\fR" 4
+.IX Item "-e function_name"
+The \fB\-e\fR \fIfunction\fR option tells \f(CW\*(C`gprof\*(C'\fR to not print
+information about the function \fIfunction_name\fR (and its
+children...) in the call graph.  The function will still be listed
+as a child of any functions that call it, but its index number will be
+shown as \fB[not printed]\fR.  More than one \fB\-e\fR option may be
+given; only one \fIfunction_name\fR may be indicated with each \fB\-e\fR
+option.
+.ie n .IP """\-E \f(CIfunction_name\f(CW""" 4
+.el .IP "\f(CW\-E \f(CIfunction_name\f(CW\fR" 4
+.IX Item "-E function_name"
+The \f(CW\*(C`\-E \f(CIfunction\f(CW\*(C'\fR option works like the \f(CW\*(C`\-e\*(C'\fR option, but
+time spent in the function (and children who were not called from
+anywhere else), will not be used to compute the percentages-of-time for
+the call graph.  More than one \fB\-E\fR option may be given; only one
+\&\fIfunction_name\fR may be indicated with each \fB\-E\fR option.
+.ie n .IP """\-f \f(CIfunction_name\f(CW""" 4
+.el .IP "\f(CW\-f \f(CIfunction_name\f(CW\fR" 4
+.IX Item "-f function_name"
+The \fB\-f\fR \fIfunction\fR option causes \f(CW\*(C`gprof\*(C'\fR to limit the
+call graph to the function \fIfunction_name\fR and its children (and
+their children...).  More than one \fB\-f\fR option may be given;
+only one \fIfunction_name\fR may be indicated with each \fB\-f\fR
+option.
+.ie n .IP """\-F \f(CIfunction_name\f(CW""" 4
+.el .IP "\f(CW\-F \f(CIfunction_name\f(CW\fR" 4
+.IX Item "-F function_name"
+The \fB\-F\fR \fIfunction\fR option works like the \f(CW\*(C`\-f\*(C'\fR option, but
+only time spent in the function and its children (and their
+children...) will be used to determine total-time and
+percentages-of-time for the call graph.  More than one \fB\-F\fR option
+may be given; only one \fIfunction_name\fR may be indicated with each
+\&\fB\-F\fR option.  The \fB\-F\fR option overrides the \fB\-E\fR option.
+.SH "FILES"
+.IX Header "FILES"
+.ie n .IP """\f(CIa.out\f(CW""" 4
+.el .IP "\f(CW\f(CIa.out\f(CW\fR" 4
+.IX Item "a.out"
+the namelist and text space.
+.ie n .IP """\f(CIgmon.out\f(CW""" 4
+.el .IP "\f(CW\f(CIgmon.out\f(CW\fR" 4
+.IX Item "gmon.out"
+dynamic call graph and profile.
+.ie n .IP """\f(CIgmon.sum\f(CW""" 4
+.el .IP "\f(CW\f(CIgmon.sum\f(CW\fR" 4
+.IX Item "gmon.sum"
+summarized dynamic call graph and profile.
+.SH "BUGS"
+.IX Header "BUGS"
+The granularity of the sampling is shown, but remains
+statistical at best.
+We assume that the time for each execution of a function
+can be expressed by the total time for the function divided
+by the number of times the function is called.
+Thus the time propagated along the call graph arcs to the function's
+parents is directly proportional to the number of times that
+arc is traversed.
+.PP
+Parents that are not themselves profiled will have the time of
+their profiled children propagated to them, but they will appear
+to be spontaneously invoked in the call graph listing, and will
+not have their time propagated further.
+Similarly, signal catchers, even though profiled, will appear
+to be spontaneous (although for more obscure reasons).
+Any profiled children of signal catchers should have their times
+propagated properly, unless the signal catcher was invoked during
+the execution of the profiling routine, in which case all is lost.
+.PP
+The profiled program must call \f(CW\*(C`exit\*(C'\fR(2)
+or return normally for the profiling information to be saved
+in the \fIgmon.out\fR file.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fImonitor\fR\|(3), \fIprofil\fR\|(2), \fIcc\fR\|(1), \fIprof\fR\|(1), and the Info entry for \fIgprof\fR.
+.PP
+\&\*(L"An Execution Profiler for Modular Programs\*(R",
+by S. Graham, P. Kessler, M. McKusick;
+Software \- Practice and Experience,
+Vol. 13, pp. 671\-685, 1983.
+.PP
+\&\*(L"gprof: A Call Graph Execution Profiler\*(R",
+by S. Graham, P. Kessler, M. McKusick;
+Proceedings of the \s-1SIGPLAN \s0'82 Symposium on Compiler Construction,
+\&\s-1SIGPLAN\s0 Notices, Vol. 17, No  6, pp. 120\-126, June 1982.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1988\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ld.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ld.1
new file mode 100644
index 0000000..d033ad2
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ld.1
@@ -0,0 +1,2706 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "LD 1"
+.TH LD 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+ld \- The GNU linker
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+ld [\fBoptions\fR] \fIobjfile\fR ...
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBld\fR combines a number of object and archive files, relocates
+their data and ties up symbol references. Usually the last step in
+compiling a program is to run \fBld\fR.
+.PP
+\&\fBld\fR accepts Linker Command Language files written in
+a superset of \s-1AT&T\s0's Link Editor Command Language syntax,
+to provide explicit and total control over the linking process.
+.PP
+This man page does not describe the command language; see the
+\&\fBld\fR entry in \f(CW\*(C`info\*(C'\fR for full details on the command
+language and on other aspects of the \s-1GNU\s0 linker.
+.PP
+This version of \fBld\fR uses the general purpose \s-1BFD\s0 libraries
+to operate on object files. This allows \fBld\fR to read, combine, and
+write object files in many different formats\-\-\-for example, \s-1COFF\s0 or
+\&\f(CW\*(C`a.out\*(C'\fR.  Different formats may be linked together to produce any
+available kind of object file.
+.PP
+Aside from its flexibility, the \s-1GNU\s0 linker is more helpful than other
+linkers in providing diagnostic information.  Many linkers abandon
+execution immediately upon encountering an error; whenever possible,
+\&\fBld\fR continues executing, allowing you to identify other errors
+(or, in some cases, to get an output file in spite of the error).
+.PP
+The \s-1GNU\s0 linker \fBld\fR is meant to cover a broad range of situations,
+and to be as compatible as possible with other linkers.  As a result,
+you have many choices to control its behavior.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The linker supports a plethora of command-line options, but in actual
+practice few of them are used in any particular context.
+For instance, a frequent use of \fBld\fR is to link standard Unix
+object files on a standard, supported Unix system.  On such a system, to
+link a file \f(CW\*(C`hello.o\*(C'\fR:
+.PP
+.Vb 1
+\&        ld \-o <output> /lib/crt0.o hello.o \-lc
+.Ve
+.PP
+This tells \fBld\fR to produce a file called \fIoutput\fR as the
+result of linking the file \f(CW\*(C`/lib/crt0.o\*(C'\fR with \f(CW\*(C`hello.o\*(C'\fR and
+the library \f(CW\*(C`libc.a\*(C'\fR, which will come from the standard search
+directories.  (See the discussion of the \fB\-l\fR option below.)
+.PP
+Some of the command-line options to \fBld\fR may be specified at any
+point in the command line.  However, options which refer to files, such
+as \fB\-l\fR or \fB\-T\fR, cause the file to be read at the point at
+which the option appears in the command line, relative to the object
+files and other file options.  Repeating non-file options with a
+different argument will either have no further effect, or override prior
+occurrences (those further to the left on the command line) of that
+option.  Options which may be meaningfully specified more than once are
+noted in the descriptions below.
+.PP
+Non-option arguments are object files or archives which are to be linked
+together.  They may follow, precede, or be mixed in with command-line
+options, except that an object file argument may not be placed between
+an option and its argument.
+.PP
+Usually the linker is invoked with at least one object file, but you can
+specify other forms of binary input files using \fB\-l\fR, \fB\-R\fR,
+and the script command language.  If \fIno\fR binary input files at all
+are specified, the linker does not produce any output, and issues the
+message \fBNo input files\fR.
+.PP
+If the linker cannot recognize the format of an object file, it will
+assume that it is a linker script.  A script specified in this way
+augments the main linker script used for the link (either the default
+linker script or the one specified by using \fB\-T\fR).  This feature
+permits the linker to link against a file which appears to be an object
+or an archive, but actually merely defines some symbol values, or uses
+\&\f(CW\*(C`INPUT\*(C'\fR or \f(CW\*(C`GROUP\*(C'\fR to load other objects.  Specifying a
+script in this way merely augments the main linker script, with the
+extra commands placed after the main script; use the \fB\-T\fR option
+to replace the default linker script entirely, but note the effect of
+the \f(CW\*(C`INSERT\*(C'\fR command.
+.PP
+For options whose names are a single letter,
+option arguments must either follow the option letter without intervening
+whitespace, or be given as separate arguments immediately following the
+option that requires them.
+.PP
+For options whose names are multiple letters, either one dash or two can
+precede the option name; for example, \fB\-trace\-symbol\fR and
+\&\fB\-\-trace\-symbol\fR are equivalent.  Note\-\-\-there is one exception to
+this rule.  Multiple letter options that start with a lower case 'o' can
+only be preceded by two dashes.  This is to reduce confusion with the
+\&\fB\-o\fR option.  So for example \fB\-omagic\fR sets the output file
+name to \fBmagic\fR whereas \fB\-\-omagic\fR sets the \s-1NMAGIC\s0 flag on the
+output.
+.PP
+Arguments to multiple-letter options must either be separated from the
+option name by an equals sign, or be given as separate arguments
+immediately following the option that requires them.  For example,
+\&\fB\-\-trace\-symbol foo\fR and \fB\-\-trace\-symbol=foo\fR are equivalent.
+Unique abbreviations of the names of multiple-letter options are
+accepted.
+.PP
+Note\-\-\-if the linker is being invoked indirectly, via a compiler driver
+(e.g. \fBgcc\fR) then all the linker command line options should be
+prefixed by \fB\-Wl,\fR (or whatever is appropriate for the particular
+compiler driver) like this:
+.PP
+.Vb 1
+\&          gcc \-Wl,\-\-start\-group foo.o bar.o \-Wl,\-\-end\-group
+.Ve
+.PP
+This is important, because otherwise the compiler driver program may
+silently drop the linker options, resulting in a bad link.  Confusion
+may also arise when passing options that require values through a
+driver, as the use of a space between option and argument acts as
+a separator, and causes the driver to pass only the option to the linker
+and the argument to the compiler.  In this case, it is simplest to use
+the joined forms of both single\- and multiple-letter options, such as:
+.PP
+.Vb 1
+\&          gcc foo.o bar.o \-Wl,\-eENTRY \-Wl,\-Map=a.map
+.Ve
+.PP
+Here is a table of the generic command line switches accepted by the \s-1GNU\s0
+linker:
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.IP "\fB\-a\fR \fIkeyword\fR" 4
+.IX Item "-a keyword"
+This option is supported for \s-1HP/UX\s0 compatibility.  The \fIkeyword\fR
+argument must be one of the strings \fBarchive\fR, \fBshared\fR, or
+\&\fBdefault\fR.  \fB\-aarchive\fR is functionally equivalent to
+\&\fB\-Bstatic\fR, and the other two keywords are functionally equivalent
+to \fB\-Bdynamic\fR.  This option may be used any number of times.
+.IP "\fB\-\-audit\fR \fI\s-1AUDITLIB\s0\fR" 4
+.IX Item "--audit AUDITLIB"
+Adds \fI\s-1AUDITLIB\s0\fR to the \f(CW\*(C`DT_AUDIT\*(C'\fR entry of the dynamic section.
+\&\fI\s-1AUDITLIB\s0\fR is not checked for existence, nor will it use the \s-1DT_SONAME\s0
+specified in the library.  If specified multiple times \f(CW\*(C`DT_AUDIT\*(C'\fR
+will contain a colon separated list of audit interfaces to use. If the linker
+finds an object with an audit entry while searching for shared libraries,
+it will add a corresponding \f(CW\*(C`DT_DEPAUDIT\*(C'\fR entry in the output file.
+This option is only meaningful on \s-1ELF\s0 platforms supporting the rtld-audit
+interface.
+.IP "\fB\-A\fR \fIarchitecture\fR" 4
+.IX Item "-A architecture"
+.PD 0
+.IP "\fB\-\-architecture=\fR\fIarchitecture\fR" 4
+.IX Item "--architecture=architecture"
+.PD
+In the current release of \fBld\fR, this option is useful only for the
+Intel 960 family of architectures.  In that \fBld\fR configuration, the
+\&\fIarchitecture\fR argument identifies the particular architecture in
+the 960 family, enabling some safeguards and modifying the
+archive-library search path.
+.Sp
+Future releases of \fBld\fR may support similar functionality for
+other architecture families.
+.IP "\fB\-b\fR \fIinput-format\fR" 4
+.IX Item "-b input-format"
+.PD 0
+.IP "\fB\-\-format=\fR\fIinput-format\fR" 4
+.IX Item "--format=input-format"
+.PD
+\&\fBld\fR may be configured to support more than one kind of object
+file.  If your \fBld\fR is configured this way, you can use the
+\&\fB\-b\fR option to specify the binary format for input object files
+that follow this option on the command line.  Even when \fBld\fR is
+configured to support alternative object formats, you don't usually need
+to specify this, as \fBld\fR should be configured to expect as a
+default input format the most usual format on each machine.
+\&\fIinput-format\fR is a text string, the name of a particular format
+supported by the \s-1BFD\s0 libraries.  (You can list the available binary
+formats with \fBobjdump \-i\fR.)
+.Sp
+You may want to use this option if you are linking files with an unusual
+binary format.  You can also use \fB\-b\fR to switch formats explicitly (when
+linking object files of different formats), by including
+\&\fB\-b\fR \fIinput-format\fR before each group of object files in a
+particular format.
+.Sp
+The default format is taken from the environment variable
+\&\f(CW\*(C`GNUTARGET\*(C'\fR.
+.Sp
+You can also define the input format from a script, using the command
+\&\f(CW\*(C`TARGET\*(C'\fR;
+.IP "\fB\-c\fR \fIMRI-commandfile\fR" 4
+.IX Item "-c MRI-commandfile"
+.PD 0
+.IP "\fB\-\-mri\-script=\fR\fIMRI-commandfile\fR" 4
+.IX Item "--mri-script=MRI-commandfile"
+.PD
+For compatibility with linkers produced by \s-1MRI, \s0\fBld\fR accepts script
+files written in an alternate, restricted command language, described in
+the \s-1MRI\s0 Compatible Script Files section of \s-1GNU\s0 ld documentation.
+Introduce \s-1MRI\s0 script files with
+the option \fB\-c\fR; use the \fB\-T\fR option to run linker
+scripts written in the general-purpose \fBld\fR scripting language.
+If \fIMRI-cmdfile\fR does not exist, \fBld\fR looks for it in the directories
+specified by any \fB\-L\fR options.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-dc\fR" 4
+.IX Item "-dc"
+.IP "\fB\-dp\fR" 4
+.IX Item "-dp"
+.PD
+These three options are equivalent; multiple forms are supported for
+compatibility with other linkers.  They assign space to common symbols
+even if a relocatable output file is specified (with \fB\-r\fR).  The
+script command \f(CW\*(C`FORCE_COMMON_ALLOCATION\*(C'\fR has the same effect.
+.IP "\fB\-\-depaudit\fR \fI\s-1AUDITLIB\s0\fR" 4
+.IX Item "--depaudit AUDITLIB"
+.PD 0
+.IP "\fB\-P\fR \fI\s-1AUDITLIB\s0\fR" 4
+.IX Item "-P AUDITLIB"
+.PD
+Adds \fI\s-1AUDITLIB\s0\fR to the \f(CW\*(C`DT_DEPAUDIT\*(C'\fR entry of the dynamic section.
+\&\fI\s-1AUDITLIB\s0\fR is not checked for existence, nor will it use the \s-1DT_SONAME\s0
+specified in the library.  If specified multiple times \f(CW\*(C`DT_DEPAUDIT\*(C'\fR
+will contain a colon separated list of audit interfaces to use.  This
+option is only meaningful on \s-1ELF\s0 platforms supporting the rtld-audit interface.
+The \-P option is provided for Solaris compatibility.
+.IP "\fB\-e\fR \fIentry\fR" 4
+.IX Item "-e entry"
+.PD 0
+.IP "\fB\-\-entry=\fR\fIentry\fR" 4
+.IX Item "--entry=entry"
+.PD
+Use \fIentry\fR as the explicit symbol for beginning execution of your
+program, rather than the default entry point.  If there is no symbol
+named \fIentry\fR, the linker will try to parse \fIentry\fR as a number,
+and use that as the entry address (the number will be interpreted in
+base 10; you may use a leading \fB0x\fR for base 16, or a leading
+\&\fB0\fR for base 8).
+.IP "\fB\-\-exclude\-libs\fR \fIlib\fR\fB,\fR\fIlib\fR\fB,...\fR" 4
+.IX Item "--exclude-libs lib,lib,..."
+Specifies a list of archive libraries from which symbols should not be automatically
+exported.  The library names may be delimited by commas or colons.  Specifying
+\&\f(CW\*(C`\-\-exclude\-libs ALL\*(C'\fR excludes symbols in all archive libraries from
+automatic export.  This option is available only for the i386 \s-1PE\s0 targeted
+port of the linker and for \s-1ELF\s0 targeted ports.  For i386 \s-1PE,\s0 symbols
+explicitly listed in a .def file are still exported, regardless of this
+option.  For \s-1ELF\s0 targeted ports, symbols affected by this option will
+be treated as hidden.
+.IP "\fB\-\-exclude\-modules\-for\-implib\fR \fImodule\fR\fB,\fR\fImodule\fR\fB,...\fR" 4
+.IX Item "--exclude-modules-for-implib module,module,..."
+Specifies a list of object files or archive members, from which symbols
+should not be automatically exported, but which should be copied wholesale
+into the import library being generated during the link.  The module names
+may be delimited by commas or colons, and must match exactly the filenames
+used by \fBld\fR to open the files; for archive members, this is simply
+the member name, but for object files the name listed must include and
+match precisely any path used to specify the input file on the linker's
+command-line.  This option is available only for the i386 \s-1PE\s0 targeted port
+of the linker.  Symbols explicitly listed in a .def file are still exported,
+regardless of this option.
+.IP "\fB\-E\fR" 4
+.IX Item "-E"
+.PD 0
+.IP "\fB\-\-export\-dynamic\fR" 4
+.IX Item "--export-dynamic"
+.IP "\fB\-\-no\-export\-dynamic\fR" 4
+.IX Item "--no-export-dynamic"
+.PD
+When creating a dynamically linked executable, using the \fB\-E\fR
+option or the \fB\-\-export\-dynamic\fR option causes the linker to add
+all symbols to the dynamic symbol table.  The dynamic symbol table is the
+set of symbols which are visible from dynamic objects at run time.
+.Sp
+If you do not use either of these options (or use the
+\&\fB\-\-no\-export\-dynamic\fR option to restore the default behavior), the
+dynamic symbol table will normally contain only those symbols which are
+referenced by some dynamic object mentioned in the link.
+.Sp
+If you use \f(CW\*(C`dlopen\*(C'\fR to load a dynamic object which needs to refer
+back to the symbols defined by the program, rather than some other
+dynamic object, then you will probably need to use this option when
+linking the program itself.
+.Sp
+You can also use the dynamic list to control what symbols should
+be added to the dynamic symbol table if the output format supports it.
+See the description of \fB\-\-dynamic\-list\fR.
+.Sp
+Note that this option is specific to \s-1ELF\s0 targeted ports.  \s-1PE\s0 targets
+support a similar function to export all symbols from a \s-1DLL\s0 or \s-1EXE\s0; see
+the description of \fB\-\-export\-all\-symbols\fR below.
+.IP "\fB\-EB\fR" 4
+.IX Item "-EB"
+Link big-endian objects.  This affects the default output format.
+.IP "\fB\-EL\fR" 4
+.IX Item "-EL"
+Link little-endian objects.  This affects the default output format.
+.IP "\fB\-f\fR \fIname\fR" 4
+.IX Item "-f name"
+.PD 0
+.IP "\fB\-\-auxiliary=\fR\fIname\fR" 4
+.IX Item "--auxiliary=name"
+.PD
+When creating an \s-1ELF\s0 shared object, set the internal \s-1DT_AUXILIARY\s0 field
+to the specified name.  This tells the dynamic linker that the symbol
+table of the shared object should be used as an auxiliary filter on the
+symbol table of the shared object \fIname\fR.
+.Sp
+If you later link a program against this filter object, then, when you
+run the program, the dynamic linker will see the \s-1DT_AUXILIARY\s0 field.  If
+the dynamic linker resolves any symbols from the filter object, it will
+first check whether there is a definition in the shared object
+\&\fIname\fR.  If there is one, it will be used instead of the definition
+in the filter object.  The shared object \fIname\fR need not exist.
+Thus the shared object \fIname\fR may be used to provide an alternative
+implementation of certain functions, perhaps for debugging or for
+machine specific performance.
+.Sp
+This option may be specified more than once.  The \s-1DT_AUXILIARY\s0 entries
+will be created in the order in which they appear on the command line.
+.IP "\fB\-F\fR \fIname\fR" 4
+.IX Item "-F name"
+.PD 0
+.IP "\fB\-\-filter=\fR\fIname\fR" 4
+.IX Item "--filter=name"
+.PD
+When creating an \s-1ELF\s0 shared object, set the internal \s-1DT_FILTER\s0 field to
+the specified name.  This tells the dynamic linker that the symbol table
+of the shared object which is being created should be used as a filter
+on the symbol table of the shared object \fIname\fR.
+.Sp
+If you later link a program against this filter object, then, when you
+run the program, the dynamic linker will see the \s-1DT_FILTER\s0 field.  The
+dynamic linker will resolve symbols according to the symbol table of the
+filter object as usual, but it will actually link to the definitions
+found in the shared object \fIname\fR.  Thus the filter object can be
+used to select a subset of the symbols provided by the object
+\&\fIname\fR.
+.Sp
+Some older linkers used the \fB\-F\fR option throughout a compilation
+toolchain for specifying object-file format for both input and output
+object files.
+The \s-1GNU\s0 linker uses other mechanisms for this purpose: the
+\&\fB\-b\fR, \fB\-\-format\fR, \fB\-\-oformat\fR options, the
+\&\f(CW\*(C`TARGET\*(C'\fR command in linker scripts, and the \f(CW\*(C`GNUTARGET\*(C'\fR
+environment variable.
+The \s-1GNU\s0 linker will ignore the \fB\-F\fR option when not
+creating an \s-1ELF\s0 shared object.
+.IP "\fB\-fini=\fR\fIname\fR" 4
+.IX Item "-fini=name"
+When creating an \s-1ELF\s0 executable or shared object, call \s-1NAME\s0 when the
+executable or shared object is unloaded, by setting \s-1DT_FINI\s0 to the
+address of the function.  By default, the linker uses \f(CW\*(C`_fini\*(C'\fR as
+the function to call.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+Ignored.  Provided for compatibility with other tools.
+.IP "\fB\-G\fR \fIvalue\fR" 4
+.IX Item "-G value"
+.PD 0
+.IP "\fB\-\-gpsize=\fR\fIvalue\fR" 4
+.IX Item "--gpsize=value"
+.PD
+Set the maximum size of objects to be optimized using the \s-1GP\s0 register to
+\&\fIsize\fR.  This is only meaningful for object file formats such as
+\&\s-1MIPS ELF\s0 that support putting large and small objects into different
+sections.  This is ignored for other object file formats.
+.IP "\fB\-h\fR \fIname\fR" 4
+.IX Item "-h name"
+.PD 0
+.IP "\fB\-soname=\fR\fIname\fR" 4
+.IX Item "-soname=name"
+.PD
+When creating an \s-1ELF\s0 shared object, set the internal \s-1DT_SONAME\s0 field to
+the specified name.  When an executable is linked with a shared object
+which has a \s-1DT_SONAME\s0 field, then when the executable is run the dynamic
+linker will attempt to load the shared object specified by the \s-1DT_SONAME\s0
+field rather than the using the file name given to the linker.
+.IP "\fB\-i\fR" 4
+.IX Item "-i"
+Perform an incremental link (same as option \fB\-r\fR).
+.IP "\fB\-init=\fR\fIname\fR" 4
+.IX Item "-init=name"
+When creating an \s-1ELF\s0 executable or shared object, call \s-1NAME\s0 when the
+executable or shared object is loaded, by setting \s-1DT_INIT\s0 to the address
+of the function.  By default, the linker uses \f(CW\*(C`_init\*(C'\fR as the
+function to call.
+.IP "\fB\-l\fR \fInamespec\fR" 4
+.IX Item "-l namespec"
+.PD 0
+.IP "\fB\-\-library=\fR\fInamespec\fR" 4
+.IX Item "--library=namespec"
+.PD
+Add the archive or object file specified by \fInamespec\fR to the
+list of files to link.  This option may be used any number of times.
+If \fInamespec\fR is of the form \fI:\fIfilename\fI\fR, \fBld\fR
+will search the library path for a file called \fIfilename\fR, otherwise it
+will search the library path for a file called \fIlib\fInamespec\fI.a\fR.
+.Sp
+On systems which support shared libraries, \fBld\fR may also search for
+files other than \fIlib\fInamespec\fI.a\fR.  Specifically, on \s-1ELF\s0
+and SunOS systems, \fBld\fR will search a directory for a library
+called \fIlib\fInamespec\fI.so\fR before searching for one called
+\&\fIlib\fInamespec\fI.a\fR.  (By convention, a \f(CW\*(C`.so\*(C'\fR extension
+indicates a shared library.)  Note that this behavior does not apply
+to \fI:\fIfilename\fI\fR, which always specifies a file called
+\&\fIfilename\fR.
+.Sp
+The linker will search an archive only once, at the location where it is
+specified on the command line.  If the archive defines a symbol which
+was undefined in some object which appeared before the archive on the
+command line, the linker will include the appropriate file(s) from the
+archive.  However, an undefined symbol in an object appearing later on
+the command line will not cause the linker to search the archive again.
+.Sp
+See the \fB\-(\fR option for a way to force the linker to search
+archives multiple times.
+.Sp
+You may list the same archive multiple times on the command line.
+.Sp
+This type of archive searching is standard for Unix linkers.  However,
+if you are using \fBld\fR on \s-1AIX,\s0 note that it is different from the
+behaviour of the \s-1AIX\s0 linker.
+.IP "\fB\-L\fR \fIsearchdir\fR" 4
+.IX Item "-L searchdir"
+.PD 0
+.IP "\fB\-\-library\-path=\fR\fIsearchdir\fR" 4
+.IX Item "--library-path=searchdir"
+.PD
+Add path \fIsearchdir\fR to the list of paths that \fBld\fR will search
+for archive libraries and \fBld\fR control scripts.  You may use this
+option any number of times.  The directories are searched in the order
+in which they are specified on the command line.  Directories specified
+on the command line are searched before the default directories.  All
+\&\fB\-L\fR options apply to all \fB\-l\fR options, regardless of the
+order in which the options appear.  \fB\-L\fR options do not affect
+how \fBld\fR searches for a linker script unless \fB\-T\fR
+option is specified.
+.Sp
+If \fIsearchdir\fR begins with \f(CW\*(C`=\*(C'\fR, then the \f(CW\*(C`=\*(C'\fR will be replaced
+by the \fIsysroot prefix\fR, controlled by the \fB\-\-sysroot\fR option, or
+specified when the linker is configured.
+.Sp
+The default set of paths searched (without being specified with
+\&\fB\-L\fR) depends on which emulation mode \fBld\fR is using, and in
+some cases also on how it was configured.
+.Sp
+The paths can also be specified in a link script with the
+\&\f(CW\*(C`SEARCH_DIR\*(C'\fR command.  Directories specified this way are searched
+at the point in which the linker script appears in the command line.
+.IP "\fB\-m\fR \fIemulation\fR" 4
+.IX Item "-m emulation"
+Emulate the \fIemulation\fR linker.  You can list the available
+emulations with the \fB\-\-verbose\fR or \fB\-V\fR options.
+.Sp
+If the \fB\-m\fR option is not used, the emulation is taken from the
+\&\f(CW\*(C`LDEMULATION\*(C'\fR environment variable, if that is defined.
+.Sp
+Otherwise, the default emulation depends upon how the linker was
+configured.
+.IP "\fB\-M\fR" 4
+.IX Item "-M"
+.PD 0
+.IP "\fB\-\-print\-map\fR" 4
+.IX Item "--print-map"
+.PD
+Print a link map to the standard output.  A link map provides
+information about the link, including the following:
+.RS 4
+.IP "\(bu" 4
+Where object files are mapped into memory.
+.IP "\(bu" 4
+How common symbols are allocated.
+.IP "\(bu" 4
+All archive members included in the link, with a mention of the symbol
+which caused the archive member to be brought in.
+.IP "\(bu" 4
+The values assigned to symbols.
+.Sp
+Note \- symbols whose values are computed by an expression which
+involves a reference to a previous value of the same symbol may not
+have correct result displayed in the link map.  This is because the
+linker discards intermediate results and only retains the final value
+of an expression.  Under such circumstances the linker will display
+the final value enclosed by square brackets.  Thus for example a
+linker script containing:
+.Sp
+.Vb 3
+\&           foo = 1
+\&           foo = foo * 4
+\&           foo = foo + 8
+.Ve
+.Sp
+will produce the following output in the link map if the \fB\-M\fR
+option is used:
+.Sp
+.Vb 3
+\&           0x00000001                foo = 0x1
+\&           [0x0000000c]                foo = (foo * 0x4)
+\&           [0x0000000c]                foo = (foo + 0x8)
+.Ve
+.Sp
+See \fBExpressions\fR for more information about expressions in linker
+scripts.
+.RE
+.RS 4
+.RE
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+.PD 0
+.IP "\fB\-\-nmagic\fR" 4
+.IX Item "--nmagic"
+.PD
+Turn off page alignment of sections, and disable linking against shared
+libraries.  If the output format supports Unix style magic numbers,
+mark the output as \f(CW\*(C`NMAGIC\*(C'\fR.
+.IP "\fB\-N\fR" 4
+.IX Item "-N"
+.PD 0
+.IP "\fB\-\-omagic\fR" 4
+.IX Item "--omagic"
+.PD
+Set the text and data sections to be readable and writable.  Also, do
+not page-align the data segment, and disable linking against shared
+libraries.  If the output format supports Unix style magic numbers,
+mark the output as \f(CW\*(C`OMAGIC\*(C'\fR. Note: Although a writable text section
+is allowed for PE-COFF targets, it does not conform to the format
+specification published by Microsoft.
+.IP "\fB\-\-no\-omagic\fR" 4
+.IX Item "--no-omagic"
+This option negates most of the effects of the \fB\-N\fR option.  It
+sets the text section to be read-only, and forces the data segment to
+be page-aligned.  Note \- this option does not enable linking against
+shared libraries.  Use \fB\-Bdynamic\fR for this.
+.IP "\fB\-o\fR \fIoutput\fR" 4
+.IX Item "-o output"
+.PD 0
+.IP "\fB\-\-output=\fR\fIoutput\fR" 4
+.IX Item "--output=output"
+.PD
+Use \fIoutput\fR as the name for the program produced by \fBld\fR; if this
+option is not specified, the name \fIa.out\fR is used by default.  The
+script command \f(CW\*(C`OUTPUT\*(C'\fR can also specify the output file name.
+.IP "\fB\-O\fR \fIlevel\fR" 4
+.IX Item "-O level"
+If \fIlevel\fR is a numeric values greater than zero \fBld\fR optimizes
+the output.  This might take significantly longer and therefore probably
+should only be enabled for the final binary.  At the moment this
+option only affects \s-1ELF\s0 shared library generation.  Future releases of
+the linker may make more use of this option.  Also currently there is
+no difference in the linker's behaviour for different non-zero values
+of this option.  Again this may change with future releases.
+.IP "\fB\-\-push\-state\fR" 4
+.IX Item "--push-state"
+The \fB\-\-push\-state\fR allows to preserve the current state of the
+flags which govern the input file handling so that they can all be
+restored with one corresponding \fB\-\-pop\-state\fR option.
+.Sp
+The option which are covered are: \fB\-Bdynamic\fR, \fB\-Bstatic\fR,
+\&\fB\-dn\fR, \fB\-dy\fR, \fB\-call_shared\fR, \fB\-non_shared\fR,
+\&\fB\-static\fR, \fB\-N\fR, \fB\-n\fR, \fB\-\-whole\-archive\fR,
+\&\fB\-\-no\-whole\-archive\fR, \fB\-r\fR, \fB\-Ur\fR,
+\&\fB\-\-copy\-dt\-needed\-entries\fR, \fB\-\-no\-copy\-dt\-needed\-entries\fR,
+\&\fB\-\-as\-needed\fR, \fB\-\-no\-as\-needed\fR, and \fB\-a\fR.
+.Sp
+One target for this option are specifications for \fIpkg-config\fR.  When
+used with the \fB\-\-libs\fR option all possibly needed libraries are
+listed and then possibly linked with all the time.  It is better to return
+something as follows:
+.Sp
+.Vb 1
+\&        \-Wl,\-\-push\-state,\-\-as\-needed \-libone \-libtwo \-Wl,\-\-pop\-state
+.Ve
+.Sp
+Undoes the effect of \-\-push\-state, restores the previous values of the
+flags governing input file handling.
+.IP "\fB\-q\fR" 4
+.IX Item "-q"
+.PD 0
+.IP "\fB\-\-emit\-relocs\fR" 4
+.IX Item "--emit-relocs"
+.PD
+Leave relocation sections and contents in fully linked executables.
+Post link analysis and optimization tools may need this information in
+order to perform correct modifications of executables.  This results
+in larger executables.
+.Sp
+This option is currently only supported on \s-1ELF\s0 platforms.
+.IP "\fB\-\-force\-dynamic\fR" 4
+.IX Item "--force-dynamic"
+Force the output file to have dynamic sections.  This option is specific
+to VxWorks targets.
+.IP "\fB\-r\fR" 4
+.IX Item "-r"
+.PD 0
+.IP "\fB\-\-relocatable\fR" 4
+.IX Item "--relocatable"
+.PD
+Generate relocatable output\-\-\-i.e., generate an output file that can in
+turn serve as input to \fBld\fR.  This is often called \fIpartial
+linking\fR.  As a side effect, in environments that support standard Unix
+magic numbers, this option also sets the output file's magic number to
+\&\f(CW\*(C`OMAGIC\*(C'\fR.
+If this option is not specified, an absolute file is produced.  When
+linking \*(C+ programs, this option \fIwill not\fR resolve references to
+constructors; to do that, use \fB\-Ur\fR.
+.Sp
+When an input file does not have the same format as the output file,
+partial linking is only supported if that input file does not contain any
+relocations.  Different output formats can have further restrictions; for
+example some \f(CW\*(C`a.out\*(C'\fR\-based formats do not support partial linking
+with input files in other formats at all.
+.Sp
+This option does the same thing as \fB\-i\fR.
+.IP "\fB\-R\fR \fIfilename\fR" 4
+.IX Item "-R filename"
+.PD 0
+.IP "\fB\-\-just\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--just-symbols=filename"
+.PD
+Read symbol names and their addresses from \fIfilename\fR, but do not
+relocate it or include it in the output.  This allows your output file
+to refer symbolically to absolute locations of memory defined in other
+programs.  You may use this option more than once.
+.Sp
+For compatibility with other \s-1ELF\s0 linkers, if the \fB\-R\fR option is
+followed by a directory name, rather than a file name, it is treated as
+the \fB\-rpath\fR option.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-strip\-all\fR" 4
+.IX Item "--strip-all"
+.PD
+Omit all symbol information from the output file.
+.IP "\fB\-S\fR" 4
+.IX Item "-S"
+.PD 0
+.IP "\fB\-\-strip\-debug\fR" 4
+.IX Item "--strip-debug"
+.PD
+Omit debugger symbol information (but not all symbols) from the output file.
+.IP "\fB\-t\fR" 4
+.IX Item "-t"
+.PD 0
+.IP "\fB\-\-trace\fR" 4
+.IX Item "--trace"
+.PD
+Print the names of the input files as \fBld\fR processes them.
+.IP "\fB\-T\fR \fIscriptfile\fR" 4
+.IX Item "-T scriptfile"
+.PD 0
+.IP "\fB\-\-script=\fR\fIscriptfile\fR" 4
+.IX Item "--script=scriptfile"
+.PD
+Use \fIscriptfile\fR as the linker script.  This script replaces
+\&\fBld\fR's default linker script (rather than adding to it), so
+\&\fIcommandfile\fR must specify everything necessary to describe the
+output file.    If \fIscriptfile\fR does not exist in
+the current directory, \f(CW\*(C`ld\*(C'\fR looks for it in the directories
+specified by any preceding \fB\-L\fR options.  Multiple \fB\-T\fR
+options accumulate.
+.IP "\fB\-dT\fR \fIscriptfile\fR" 4
+.IX Item "-dT scriptfile"
+.PD 0
+.IP "\fB\-\-default\-script=\fR\fIscriptfile\fR" 4
+.IX Item "--default-script=scriptfile"
+.PD
+Use \fIscriptfile\fR as the default linker script.
+.Sp
+This option is similar to the \fB\-\-script\fR option except that
+processing of the script is delayed until after the rest of the
+command line has been processed.  This allows options placed after the
+\&\fB\-\-default\-script\fR option on the command line to affect the
+behaviour of the linker script, which can be important when the linker
+command line cannot be directly controlled by the user.  (eg because
+the command line is being constructed by another tool, such as
+\&\fBgcc\fR).
+.IP "\fB\-u\fR \fIsymbol\fR" 4
+.IX Item "-u symbol"
+.PD 0
+.IP "\fB\-\-undefined=\fR\fIsymbol\fR" 4
+.IX Item "--undefined=symbol"
+.PD
+Force \fIsymbol\fR to be entered in the output file as an undefined
+symbol.  Doing this may, for example, trigger linking of additional
+modules from standard libraries.  \fB\-u\fR may be repeated with
+different option arguments to enter additional undefined symbols.  This
+option is equivalent to the \f(CW\*(C`EXTERN\*(C'\fR linker script command.
+.Sp
+If this option is being used to force additional modules to be pulled
+into the link, and if it is an error for the symbol to remain
+undefined, then the option \fB\-\-require\-defined\fR should be used
+instead.
+.IP "\fB\-\-require\-defined=\fR\fIsymbol\fR" 4
+.IX Item "--require-defined=symbol"
+Require that \fIsymbol\fR is defined in the output file.  This option
+is the same as option \fB\-\-undefined\fR except that if \fIsymbol\fR
+is not defined in the output file then the linker will issue an error
+and exit.  The same effect can be achieved in a linker script by using
+\&\f(CW\*(C`EXTERN\*(C'\fR, \f(CW\*(C`ASSERT\*(C'\fR and \f(CW\*(C`DEFINED\*(C'\fR together.  This option
+can be used multiple times to require additional symbols.
+.IP "\fB\-Ur\fR" 4
+.IX Item "-Ur"
+For anything other than \*(C+ programs, this option is equivalent to
+\&\fB\-r\fR: it generates relocatable output\-\-\-i.e., an output file that can in
+turn serve as input to \fBld\fR.  When linking \*(C+ programs, \fB\-Ur\fR
+\&\fIdoes\fR resolve references to constructors, unlike \fB\-r\fR.
+It does not work to use \fB\-Ur\fR on files that were themselves linked
+with \fB\-Ur\fR; once the constructor table has been built, it cannot
+be added to.  Use \fB\-Ur\fR only for the last partial link, and
+\&\fB\-r\fR for the others.
+.IP "\fB\-\-orphan\-handling=\fR\fI\s-1MODE\s0\fR" 4
+.IX Item "--orphan-handling=MODE"
+Control how orphan sections are handled.  An orphan section is one not
+specifically mentioned in a linker script.
+.Sp
+\&\fI\s-1MODE\s0\fR can have any of the following values:
+.RS 4
+.ie n .IP """place""" 4
+.el .IP "\f(CWplace\fR" 4
+.IX Item "place"
+Orphan sections are placed into a suitable output section following
+the strategy described in \fBOrphan Sections\fR.  The option
+\&\fB\-\-unique\fR also effects how sections are placed.
+.ie n .IP """discard""" 4
+.el .IP "\f(CWdiscard\fR" 4
+.IX Item "discard"
+All orphan sections are discarded, by placing them in the
+\&\fB/DISCARD/\fR section.
+.ie n .IP """warn""" 4
+.el .IP "\f(CWwarn\fR" 4
+.IX Item "warn"
+The linker will place the orphan section as for \f(CW\*(C`place\*(C'\fR and also
+issue a warning.
+.ie n .IP """error""" 4
+.el .IP "\f(CWerror\fR" 4
+.IX Item "error"
+The linker will exit with an error if any orphan section is found.
+.RE
+.RS 4
+.Sp
+The default if \fB\-\-orphan\-handling\fR is not given is \f(CW\*(C`place\*(C'\fR.
+.RE
+.IP "\fB\-\-unique[=\fR\fI\s-1SECTION\s0\fR\fB]\fR" 4
+.IX Item "--unique[=SECTION]"
+Creates a separate output section for every input section matching
+\&\fI\s-1SECTION\s0\fR, or if the optional wildcard \fI\s-1SECTION\s0\fR argument is
+missing, for every orphan input section.  An orphan section is one not
+specifically mentioned in a linker script.  You may use this option
+multiple times on the command line;  It prevents the normal merging of
+input sections with the same name, overriding output section assignments
+in a linker script.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD
+Display the version number for \fBld\fR.  The \fB\-V\fR option also
+lists the supported emulations.
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+.PD 0
+.IP "\fB\-\-discard\-all\fR" 4
+.IX Item "--discard-all"
+.PD
+Delete all local symbols.
+.IP "\fB\-X\fR" 4
+.IX Item "-X"
+.PD 0
+.IP "\fB\-\-discard\-locals\fR" 4
+.IX Item "--discard-locals"
+.PD
+Delete all temporary local symbols.  (These symbols start with
+system-specific local label prefixes, typically \fB.L\fR for \s-1ELF\s0 systems
+or \fBL\fR for traditional a.out systems.)
+.IP "\fB\-y\fR \fIsymbol\fR" 4
+.IX Item "-y symbol"
+.PD 0
+.IP "\fB\-\-trace\-symbol=\fR\fIsymbol\fR" 4
+.IX Item "--trace-symbol=symbol"
+.PD
+Print the name of each linked file in which \fIsymbol\fR appears.  This
+option may be given any number of times.  On many systems it is necessary
+to prepend an underscore.
+.Sp
+This option is useful when you have an undefined symbol in your link but
+don't know where the reference is coming from.
+.IP "\fB\-Y\fR \fIpath\fR" 4
+.IX Item "-Y path"
+Add \fIpath\fR to the default library search path.  This option exists
+for Solaris compatibility.
+.IP "\fB\-z\fR \fIkeyword\fR" 4
+.IX Item "-z keyword"
+The recognized keywords are:
+.RS 4
+.IP "\fBcombreloc\fR" 4
+.IX Item "combreloc"
+Combines multiple reloc sections and sorts them to make dynamic symbol
+lookup caching possible.
+.IP "\fBcommon\fR" 4
+.IX Item "common"
+Generate common symbols with the \s-1STT_COMMON\s0 type druing a relocatable
+link.
+.IP "\fBdefs\fR" 4
+.IX Item "defs"
+Disallows undefined symbols in object files.  Undefined symbols in
+shared libraries are still allowed.
+.IP "\fBexecstack\fR" 4
+.IX Item "execstack"
+Marks the object as requiring executable stack.
+.IP "\fBglobal\fR" 4
+.IX Item "global"
+This option is only meaningful when building a shared object.  It makes
+the symbols defined by this shared object available for symbol resolution
+of subsequently loaded libraries.
+.IP "\fBinitfirst\fR" 4
+.IX Item "initfirst"
+This option is only meaningful when building a shared object.
+It marks the object so that its runtime initialization will occur
+before the runtime initialization of any other objects brought into
+the process at the same time.  Similarly the runtime finalization of
+the object will occur after the runtime finalization of any other
+objects.
+.IP "\fBinterpose\fR" 4
+.IX Item "interpose"
+Marks the object that its symbol table interposes before all symbols
+but the primary executable.
+.IP "\fBlazy\fR" 4
+.IX Item "lazy"
+When generating an executable or shared library, mark it to tell the
+dynamic linker to defer function call resolution to the point when
+the function is called (lazy binding), rather than at load time.
+Lazy binding is the default.
+.IP "\fBloadfltr\fR" 4
+.IX Item "loadfltr"
+Marks  the object that its filters be processed immediately at
+runtime.
+.IP "\fBmuldefs\fR" 4
+.IX Item "muldefs"
+Allows multiple definitions.
+.IP "\fBnocombreloc\fR" 4
+.IX Item "nocombreloc"
+Disables multiple reloc sections combining.
+.IP "\fBnocommon\fR" 4
+.IX Item "nocommon"
+Generate common symbols with the \s-1STT_OBJECT\s0 type druing a relocatable
+link.
+.IP "\fBnocopyreloc\fR" 4
+.IX Item "nocopyreloc"
+Disable linker generated .dynbss variables used in place of variables
+defined in shared libraries.  May result in dynamic text relocations.
+.IP "\fBnodefaultlib\fR" 4
+.IX Item "nodefaultlib"
+Marks the object that the search for dependencies of this object will
+ignore any default library search paths.
+.IP "\fBnodelete\fR" 4
+.IX Item "nodelete"
+Marks the object shouldn't be unloaded at runtime.
+.IP "\fBnodlopen\fR" 4
+.IX Item "nodlopen"
+Marks the object not available to \f(CW\*(C`dlopen\*(C'\fR.
+.IP "\fBnodump\fR" 4
+.IX Item "nodump"
+Marks the object can not be dumped by \f(CW\*(C`dldump\*(C'\fR.
+.IP "\fBnoexecstack\fR" 4
+.IX Item "noexecstack"
+Marks the object as not requiring executable stack.
+.IP "\fBtext\fR" 4
+.IX Item "text"
+Treat \s-1DT_TEXTREL\s0 in shared object as error.
+.IP "\fBnotext\fR" 4
+.IX Item "notext"
+Don't treat \s-1DT_TEXTREL\s0 in shared object as error.
+.IP "\fBtextoff\fR" 4
+.IX Item "textoff"
+Don't treat \s-1DT_TEXTREL\s0 in shared object as error.
+.IP "\fBnorelro\fR" 4
+.IX Item "norelro"
+Don't create an \s-1ELF \s0\f(CW\*(C`PT_GNU_RELRO\*(C'\fR segment header in the object.
+.IP "\fBnow\fR" 4
+.IX Item "now"
+When generating an executable or shared library, mark it to tell the
+dynamic linker to resolve all symbols when the program is started, or
+when the shared library is linked to using dlopen, instead of
+deferring function call resolution to the point when the function is
+first called.
+.IP "\fBorigin\fR" 4
+.IX Item "origin"
+Marks the object may contain \f(CW$ORIGIN\fR.
+.IP "\fBrelro\fR" 4
+.IX Item "relro"
+Create an \s-1ELF \s0\f(CW\*(C`PT_GNU_RELRO\*(C'\fR segment header in the object.
+.IP "\fBmax\-page\-size=\fR\fIvalue\fR" 4
+.IX Item "max-page-size=value"
+Set the emulation maximum page size to \fIvalue\fR.
+.IP "\fBcommon\-page\-size=\fR\fIvalue\fR" 4
+.IX Item "common-page-size=value"
+Set the emulation common page size to \fIvalue\fR.
+.IP "\fBstack\-size=\fR\fIvalue\fR" 4
+.IX Item "stack-size=value"
+Specify a stack size for in an \s-1ELF \s0\f(CW\*(C`PT_GNU_STACK\*(C'\fR segment.
+Specifying zero will override any default non-zero sized
+\&\f(CW\*(C`PT_GNU_STACK\*(C'\fR segment creation.
+.IP "\fBbndplt\fR" 4
+.IX Item "bndplt"
+Always generate \s-1BND\s0 prefix in \s-1PLT\s0 entries. Supported for Linux/x86_64.
+.IP "\fBnoextern-protected-data\fR" 4
+.IX Item "noextern-protected-data"
+Don't treat protected data symbol as external when building shared
+library.  This option overrides linker backend default.  It can be used
+to workaround incorrect relocations against protected data symbols
+generated by compiler.  Updates on protected data symbols by another
+module aren't visible to the resulting shared library.  Supported for
+i386 and x86\-64.
+.IP "\fBnodynamic-undefined-weak\fR" 4
+.IX Item "nodynamic-undefined-weak"
+Don't treat undefined weak symbols as dynamic when building executable.
+This option overrides linker backend default.  It can be used to avoid
+dynamic relocations against undefined weak symbols in executable.
+Supported for i386 and x86\-64.
+.IP "\fBnoreloc-overflow\fR" 4
+.IX Item "noreloc-overflow"
+Disable relocation overflow check.  This can be used to disable
+relocation overflow check if there will be no dynamic relocation
+overflow at run-time.  Supported for x86_64.
+.IP "\fBcall\-nop=prefix\-addr\fR" 4
+.IX Item "call-nop=prefix-addr"
+.PD 0
+.IP "\fBcall\-nop=prefix\-nop\fR" 4
+.IX Item "call-nop=prefix-nop"
+.IP "\fBcall\-nop=suffix\-nop\fR" 4
+.IX Item "call-nop=suffix-nop"
+.IP "\fBcall\-nop=prefix\-\fR\fIbyte\fR" 4
+.IX Item "call-nop=prefix-byte"
+.IP "\fBcall\-nop=suffix\-\fR\fIbyte\fR" 4
+.IX Item "call-nop=suffix-byte"
+.PD
+Specify the 1\-byte \f(CW\*(C`NOP\*(C'\fR padding when transforming indirect call
+to a locally defined function, foo, via its \s-1GOT\s0 slot.
+\&\fBcall\-nop=prefix\-addr\fR generates \f(CW\*(C`0x67 call foo\*(C'\fR.
+\&\fBcall\-nop=prefix\-nop\fR generates \f(CW\*(C`0x90 call foo\*(C'\fR.
+\&\fBcall\-nop=suffix\-nop\fR generates \f(CW\*(C`call foo 0x90\*(C'\fR.
+\&\fBcall\-nop=prefix\-\fR\fIbyte\fR generates \f(CW\*(C`\f(CIbyte\f(CW call foo\*(C'\fR.
+\&\fBcall\-nop=suffix\-\fR\fIbyte\fR generates \f(CW\*(C`call foo \f(CIbyte\f(CW\*(C'\fR.
+Supported for i386 and x86_64.
+.RE
+.RS 4
+.Sp
+Other keywords are ignored for Solaris compatibility.
+.RE
+.IP "\fB\-(\fR \fIarchives\fR \fB\-)\fR" 4
+.IX Item "-( archives -)"
+.PD 0
+.IP "\fB\-\-start\-group\fR \fIarchives\fR \fB\-\-end\-group\fR" 4
+.IX Item "--start-group archives --end-group"
+.PD
+The \fIarchives\fR should be a list of archive files.  They may be
+either explicit file names, or \fB\-l\fR options.
+.Sp
+The specified archives are searched repeatedly until no new undefined
+references are created.  Normally, an archive is searched only once in
+the order that it is specified on the command line.  If a symbol in that
+archive is needed to resolve an undefined symbol referred to by an
+object in an archive that appears later on the command line, the linker
+would not be able to resolve that reference.  By grouping the archives,
+they all be searched repeatedly until all possible references are
+resolved.
+.Sp
+Using this option has a significant performance cost.  It is best to use
+it only when there are unavoidable circular references between two or
+more archives.
+.IP "\fB\-\-accept\-unknown\-input\-arch\fR" 4
+.IX Item "--accept-unknown-input-arch"
+.PD 0
+.IP "\fB\-\-no\-accept\-unknown\-input\-arch\fR" 4
+.IX Item "--no-accept-unknown-input-arch"
+.PD
+Tells the linker to accept input files whose architecture cannot be
+recognised.  The assumption is that the user knows what they are doing
+and deliberately wants to link in these unknown input files.  This was
+the default behaviour of the linker, before release 2.14.  The default
+behaviour from release 2.14 onwards is to reject such input files, and
+so the \fB\-\-accept\-unknown\-input\-arch\fR option has been added to
+restore the old behaviour.
+.IP "\fB\-\-as\-needed\fR" 4
+.IX Item "--as-needed"
+.PD 0
+.IP "\fB\-\-no\-as\-needed\fR" 4
+.IX Item "--no-as-needed"
+.PD
+This option affects \s-1ELF DT_NEEDED\s0 tags for dynamic libraries mentioned
+on the command line after the \fB\-\-as\-needed\fR option.  Normally
+the linker will add a \s-1DT_NEEDED\s0 tag for each dynamic library mentioned
+on the command line, regardless of whether the library is actually
+needed or not.  \fB\-\-as\-needed\fR causes a \s-1DT_NEEDED\s0 tag to only be
+emitted for a library that \fIat that point in the link\fR satisfies a
+non-weak undefined symbol reference from a regular object file or, if
+the library is not found in the \s-1DT_NEEDED\s0 lists of other needed libraries, a
+non-weak undefined symbol reference from another needed dynamic library.
+Object files or libraries appearing on the command line \fIafter\fR
+the library in question do not affect whether the library is seen as
+needed.  This is similar to the rules for extraction of object files
+from archives.  \fB\-\-no\-as\-needed\fR restores the default behaviour.
+.IP "\fB\-\-add\-needed\fR" 4
+.IX Item "--add-needed"
+.PD 0
+.IP "\fB\-\-no\-add\-needed\fR" 4
+.IX Item "--no-add-needed"
+.PD
+These two options have been deprecated because of the similarity of
+their names to the \fB\-\-as\-needed\fR and \fB\-\-no\-as\-needed\fR
+options.  They have been replaced by \fB\-\-copy\-dt\-needed\-entries\fR
+and \fB\-\-no\-copy\-dt\-needed\-entries\fR.
+.IP "\fB\-assert\fR \fIkeyword\fR" 4
+.IX Item "-assert keyword"
+This option is ignored for SunOS compatibility.
+.IP "\fB\-Bdynamic\fR" 4
+.IX Item "-Bdynamic"
+.PD 0
+.IP "\fB\-dy\fR" 4
+.IX Item "-dy"
+.IP "\fB\-call_shared\fR" 4
+.IX Item "-call_shared"
+.PD
+Link against dynamic libraries.  This is only meaningful on platforms
+for which shared libraries are supported.  This option is normally the
+default on such platforms.  The different variants of this option are
+for compatibility with various systems.  You may use this option
+multiple times on the command line: it affects library searching for
+\&\fB\-l\fR options which follow it.
+.IP "\fB\-Bgroup\fR" 4
+.IX Item "-Bgroup"
+Set the \f(CW\*(C`DF_1_GROUP\*(C'\fR flag in the \f(CW\*(C`DT_FLAGS_1\*(C'\fR entry in the dynamic
+section.  This causes the runtime linker to handle lookups in this
+object and its dependencies to be performed only inside the group.
+\&\fB\-\-unresolved\-symbols=report\-all\fR is implied.  This option is
+only meaningful on \s-1ELF\s0 platforms which support shared libraries.
+.IP "\fB\-Bstatic\fR" 4
+.IX Item "-Bstatic"
+.PD 0
+.IP "\fB\-dn\fR" 4
+.IX Item "-dn"
+.IP "\fB\-non_shared\fR" 4
+.IX Item "-non_shared"
+.IP "\fB\-static\fR" 4
+.IX Item "-static"
+.PD
+Do not link against shared libraries.  This is only meaningful on
+platforms for which shared libraries are supported.  The different
+variants of this option are for compatibility with various systems.  You
+may use this option multiple times on the command line: it affects
+library searching for \fB\-l\fR options which follow it.  This
+option also implies \fB\-\-unresolved\-symbols=report\-all\fR.  This
+option can be used with \fB\-shared\fR.  Doing so means that a
+shared library is being created but that all of the library's external
+references must be resolved by pulling in entries from static
+libraries.
+.IP "\fB\-Bsymbolic\fR" 4
+.IX Item "-Bsymbolic"
+When creating a shared library, bind references to global symbols to the
+definition within the shared library, if any.  Normally, it is possible
+for a program linked against a shared library to override the definition
+within the shared library.  This option can also be used with the
+\&\fB\-\-export\-dynamic\fR option, when creating a position independent
+executable, to bind references to global symbols to the definition within
+the executable.  This option is only meaningful on \s-1ELF\s0 platforms which
+support shared libraries and position independent executables.
+.IP "\fB\-Bsymbolic\-functions\fR" 4
+.IX Item "-Bsymbolic-functions"
+When creating a shared library, bind references to global function
+symbols to the definition within the shared library, if any.
+This option can also be used with the \fB\-\-export\-dynamic\fR option,
+when creating a position independent executable, to bind references
+to global function symbols to the definition within the executable.
+This option is only meaningful on \s-1ELF\s0 platforms which support shared
+libraries and position independent executables.
+.IP "\fB\-\-dynamic\-list=\fR\fIdynamic-list-file\fR" 4
+.IX Item "--dynamic-list=dynamic-list-file"
+Specify the name of a dynamic list file to the linker.  This is
+typically used when creating shared libraries to specify a list of
+global symbols whose references shouldn't be bound to the definition
+within the shared library, or creating dynamically linked executables
+to specify a list of symbols which should be added to the symbol table
+in the executable.  This option is only meaningful on \s-1ELF\s0 platforms
+which support shared libraries.
+.Sp
+The format of the dynamic list is the same as the version node without
+scope and node name.  See \fB\s-1VERSION\s0\fR for more information.
+.IP "\fB\-\-dynamic\-list\-data\fR" 4
+.IX Item "--dynamic-list-data"
+Include all global data symbols to the dynamic list.
+.IP "\fB\-\-dynamic\-list\-cpp\-new\fR" 4
+.IX Item "--dynamic-list-cpp-new"
+Provide the builtin dynamic list for \*(C+ operator new and delete.  It
+is mainly useful for building shared libstdc++.
+.IP "\fB\-\-dynamic\-list\-cpp\-typeinfo\fR" 4
+.IX Item "--dynamic-list-cpp-typeinfo"
+Provide the builtin dynamic list for \*(C+ runtime type identification.
+.IP "\fB\-\-check\-sections\fR" 4
+.IX Item "--check-sections"
+.PD 0
+.IP "\fB\-\-no\-check\-sections\fR" 4
+.IX Item "--no-check-sections"
+.PD
+Asks the linker \fInot\fR to check section addresses after they have
+been assigned to see if there are any overlaps.  Normally the linker will
+perform this check, and if it finds any overlaps it will produce
+suitable error messages.  The linker does know about, and does make
+allowances for sections in overlays.  The default behaviour can be
+restored by using the command line switch \fB\-\-check\-sections\fR.
+Section overlap is not usually checked for relocatable links.  You can
+force checking in that case by using the \fB\-\-check\-sections\fR
+option.
+.IP "\fB\-\-copy\-dt\-needed\-entries\fR" 4
+.IX Item "--copy-dt-needed-entries"
+.PD 0
+.IP "\fB\-\-no\-copy\-dt\-needed\-entries\fR" 4
+.IX Item "--no-copy-dt-needed-entries"
+.PD
+This option affects the treatment of dynamic libraries referred to
+by \s-1DT_NEEDED\s0 tags \fIinside\fR \s-1ELF\s0 dynamic libraries mentioned on the
+command line.  Normally the linker won't add a \s-1DT_NEEDED\s0 tag to the
+output binary for each library mentioned in a \s-1DT_NEEDED\s0 tag in an
+input dynamic library.  With \fB\-\-copy\-dt\-needed\-entries\fR
+specified on the command line however any dynamic libraries that
+follow it will have their \s-1DT_NEEDED\s0 entries added.  The default
+behaviour can be restored with \fB\-\-no\-copy\-dt\-needed\-entries\fR.
+.Sp
+This option also has an effect on the resolution of symbols in dynamic
+libraries.  With \fB\-\-copy\-dt\-needed\-entries\fR dynamic libraries
+mentioned on the command line will be recursively searched, following
+their \s-1DT_NEEDED\s0 tags to other libraries, in order to resolve symbols
+required by the output binary.  With the default setting however
+the searching of dynamic libraries that follow it will stop with the
+dynamic library itself.  No \s-1DT_NEEDED\s0 links will be traversed to resolve
+symbols.
+.IP "\fB\-\-cref\fR" 4
+.IX Item "--cref"
+Output a cross reference table.  If a linker map file is being
+generated, the cross reference table is printed to the map file.
+Otherwise, it is printed on the standard output.
+.Sp
+The format of the table is intentionally simple, so that it may be
+easily processed by a script if necessary.  The symbols are printed out,
+sorted by name.  For each symbol, a list of file names is given.  If the
+symbol is defined, the first file listed is the location of the
+definition.  If the symbol is defined as a common value then any files
+where this happens appear next.  Finally any files that reference the
+symbol are listed.
+.IP "\fB\-\-no\-define\-common\fR" 4
+.IX Item "--no-define-common"
+This option inhibits the assignment of addresses to common symbols.
+The script command \f(CW\*(C`INHIBIT_COMMON_ALLOCATION\*(C'\fR has the same effect.
+.Sp
+The \fB\-\-no\-define\-common\fR option allows decoupling
+the decision to assign addresses to Common symbols from the choice
+of the output file type; otherwise a non-Relocatable output type
+forces assigning addresses to Common symbols.
+Using \fB\-\-no\-define\-common\fR allows Common symbols that are referenced
+from a shared library to be assigned addresses only in the main program.
+This eliminates the unused duplicate space in the shared library,
+and also prevents any possible confusion over resolving to the wrong
+duplicate when there are many dynamic modules with specialized search
+paths for runtime symbol resolution.
+.IP "\fB\-\-defsym=\fR\fIsymbol\fR\fB=\fR\fIexpression\fR" 4
+.IX Item "--defsym=symbol=expression"
+Create a global symbol in the output file, containing the absolute
+address given by \fIexpression\fR.  You may use this option as many
+times as necessary to define multiple symbols in the command line.  A
+limited form of arithmetic is supported for the \fIexpression\fR in this
+context: you may give a hexadecimal constant or the name of an existing
+symbol, or use \f(CW\*(C`+\*(C'\fR and \f(CW\*(C`\-\*(C'\fR to add or subtract hexadecimal
+constants or symbols.  If you need more elaborate expressions, consider
+using the linker command language from a script.
+\&\fINote:\fR there should be no white space between \fIsymbol\fR, the
+equals sign ("\fB=\fR"), and \fIexpression\fR.
+.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4
+.IX Item "--demangle[=style]"
+.PD 0
+.IP "\fB\-\-no\-demangle\fR" 4
+.IX Item "--no-demangle"
+.PD
+These options control whether to demangle symbol names in error messages
+and other output.  When the linker is told to demangle, it tries to
+present symbol names in a readable fashion: it strips leading
+underscores if they are used by the object file format, and converts \*(C+
+mangled symbol names into user readable names.  Different compilers have
+different mangling styles.  The optional demangling style argument can be used
+to choose an appropriate demangling style for your compiler.  The linker will
+demangle by default unless the environment variable \fB\s-1COLLECT_NO_DEMANGLE\s0\fR
+is set.  These options may be used to override the default.
+.IP "\fB\-I\fR\fIfile\fR" 4
+.IX Item "-Ifile"
+.PD 0
+.IP "\fB\-\-dynamic\-linker=\fR\fIfile\fR" 4
+.IX Item "--dynamic-linker=file"
+.PD
+Set the name of the dynamic linker.  This is only meaningful when
+generating dynamically linked \s-1ELF\s0 executables.  The default dynamic
+linker is normally correct; don't use this unless you know what you are
+doing.
+.IP "\fB\-\-no\-dynamic\-linker\fR" 4
+.IX Item "--no-dynamic-linker"
+When producing an executable file, omit the request for a dynamic
+linker to be used at load-time.  This is only meaningful for \s-1ELF\s0
+executables that contain dynamic relocations, and usually requires
+entry point code that is capable of processing these relocations.
+.IP "\fB\-\-fatal\-warnings\fR" 4
+.IX Item "--fatal-warnings"
+.PD 0
+.IP "\fB\-\-no\-fatal\-warnings\fR" 4
+.IX Item "--no-fatal-warnings"
+.PD
+Treat all warnings as errors.  The default behaviour can be restored
+with the option \fB\-\-no\-fatal\-warnings\fR.
+.IP "\fB\-\-force\-exe\-suffix\fR" 4
+.IX Item "--force-exe-suffix"
+Make sure that an output file has a .exe suffix.
+.Sp
+If a successfully built fully linked output file does not have a
+\&\f(CW\*(C`.exe\*(C'\fR or \f(CW\*(C`.dll\*(C'\fR suffix, this option forces the linker to copy
+the output file to one of the same name with a \f(CW\*(C`.exe\*(C'\fR suffix. This
+option is useful when using unmodified Unix makefiles on a Microsoft
+Windows host, since some versions of Windows won't run an image unless
+it ends in a \f(CW\*(C`.exe\*(C'\fR suffix.
+.IP "\fB\-\-gc\-sections\fR" 4
+.IX Item "--gc-sections"
+.PD 0
+.IP "\fB\-\-no\-gc\-sections\fR" 4
+.IX Item "--no-gc-sections"
+.PD
+Enable garbage collection of unused input sections.  It is ignored on
+targets that do not support this option.  The default behaviour (of not
+performing this garbage collection) can be restored by specifying
+\&\fB\-\-no\-gc\-sections\fR on the command line.  Note that garbage
+collection for \s-1COFF\s0 and \s-1PE\s0 format targets is supported, but the
+implementation is currently considered to be experimental.
+.Sp
+\&\fB\-\-gc\-sections\fR decides which input sections are used by
+examining symbols and relocations.  The section containing the entry
+symbol and all sections containing symbols undefined on the
+command-line will be kept, as will sections containing symbols
+referenced by dynamic objects.  Note that when building shared
+libraries, the linker must assume that any visible symbol is
+referenced.  Once this initial set of sections has been determined,
+the linker recursively marks as used any section referenced by their
+relocations.  See \fB\-\-entry\fR and \fB\-\-undefined\fR.
+.Sp
+This option can be set when doing a partial link (enabled with option
+\&\fB\-r\fR).  In this case the root of symbols kept must be explicitly
+specified either by an \fB\-\-entry\fR or \fB\-\-undefined\fR option or by
+a \f(CW\*(C`ENTRY\*(C'\fR command in the linker script.
+.IP "\fB\-\-print\-gc\-sections\fR" 4
+.IX Item "--print-gc-sections"
+.PD 0
+.IP "\fB\-\-no\-print\-gc\-sections\fR" 4
+.IX Item "--no-print-gc-sections"
+.PD
+List all sections removed by garbage collection.  The listing is
+printed on stderr.  This option is only effective if garbage
+collection has been enabled via the \fB\-\-gc\-sections\fR) option.  The
+default behaviour (of not listing the sections that are removed) can
+be restored by specifying \fB\-\-no\-print\-gc\-sections\fR on the command
+line.
+.IP "\fB\-\-print\-output\-format\fR" 4
+.IX Item "--print-output-format"
+Print the name of the default output format (perhaps influenced by
+other command-line options).  This is the string that would appear
+in an \f(CW\*(C`OUTPUT_FORMAT\*(C'\fR linker script command.
+.IP "\fB\-\-print\-memory\-usage\fR" 4
+.IX Item "--print-memory-usage"
+Print used size, total size and used size of memory regions created with
+the \fB\s-1MEMORY\s0\fR command.  This is useful on embedded targets to have a
+quick view of amount of free memory.  The format of the output has one
+headline and one line per region.  It is both human readable and easily
+parsable by tools.  Here is an example of an output:
+.Sp
+.Vb 3
+\&        Memory region         Used Size  Region Size  %age Used
+\&                     ROM:        256 KB         1 MB     25.00%
+\&                     RAM:          32 B         2 GB      0.00%
+.Ve
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Print a summary of the command-line options on the standard output and exit.
+.IP "\fB\-\-target\-help\fR" 4
+.IX Item "--target-help"
+Print a summary of all target specific options on the standard output and exit.
+.IP "\fB\-Map=\fR\fImapfile\fR" 4
+.IX Item "-Map=mapfile"
+Print a link map to the file \fImapfile\fR.  See the description of the
+\&\fB\-M\fR option, above.
+.IP "\fB\-\-no\-keep\-memory\fR" 4
+.IX Item "--no-keep-memory"
+\&\fBld\fR normally optimizes for speed over memory usage by caching the
+symbol tables of input files in memory.  This option tells \fBld\fR to
+instead optimize for memory usage, by rereading the symbol tables as
+necessary.  This may be required if \fBld\fR runs out of memory space
+while linking a large executable.
+.IP "\fB\-\-no\-undefined\fR" 4
+.IX Item "--no-undefined"
+.PD 0
+.IP "\fB\-z defs\fR" 4
+.IX Item "-z defs"
+.PD
+Report unresolved symbol references from regular object files.  This
+is done even if the linker is creating a non-symbolic shared library.
+The switch \fB\-\-[no\-]allow\-shlib\-undefined\fR controls the
+behaviour for reporting unresolved references found in shared
+libraries being linked in.
+.IP "\fB\-\-allow\-multiple\-definition\fR" 4
+.IX Item "--allow-multiple-definition"
+.PD 0
+.IP "\fB\-z muldefs\fR" 4
+.IX Item "-z muldefs"
+.PD
+Normally when a symbol is defined multiple times, the linker will
+report a fatal error. These options allow multiple definitions and the
+first definition will be used.
+.IP "\fB\-\-allow\-shlib\-undefined\fR" 4
+.IX Item "--allow-shlib-undefined"
+.PD 0
+.IP "\fB\-\-no\-allow\-shlib\-undefined\fR" 4
+.IX Item "--no-allow-shlib-undefined"
+.PD
+Allows or disallows undefined symbols in shared libraries.
+This switch is similar to \fB\-\-no\-undefined\fR except that it
+determines the behaviour when the undefined symbols are in a
+shared library rather than a regular object file.  It does not affect
+how undefined symbols in regular object files are handled.
+.Sp
+The default behaviour is to report errors for any undefined symbols
+referenced in shared libraries if the linker is being used to create
+an executable, but to allow them if the linker is being used to create
+a shared library.
+.Sp
+The reasons for allowing undefined symbol references in shared
+libraries specified at link time are that:
+.RS 4
+.IP "\(bu" 4
+A shared library specified at link time may not be the same as the one
+that is available at load time, so the symbol might actually be
+resolvable at load time.
+.IP "\(bu" 4
+There are some operating systems, eg BeOS and \s-1HPPA,\s0 where undefined
+symbols in shared libraries are normal.
+.Sp
+The BeOS kernel for example patches shared libraries at load time to
+select whichever function is most appropriate for the current
+architecture.  This is used, for example, to dynamically select an
+appropriate memset function.
+.RE
+.RS 4
+.RE
+.IP "\fB\-\-no\-undefined\-version\fR" 4
+.IX Item "--no-undefined-version"
+Normally when a symbol has an undefined version, the linker will ignore
+it. This option disallows symbols with undefined version and a fatal error
+will be issued instead.
+.IP "\fB\-\-default\-symver\fR" 4
+.IX Item "--default-symver"
+Create and use a default symbol version (the soname) for unversioned
+exported symbols.
+.IP "\fB\-\-default\-imported\-symver\fR" 4
+.IX Item "--default-imported-symver"
+Create and use a default symbol version (the soname) for unversioned
+imported symbols.
+.IP "\fB\-\-no\-warn\-mismatch\fR" 4
+.IX Item "--no-warn-mismatch"
+Normally \fBld\fR will give an error if you try to link together input
+files that are mismatched for some reason, perhaps because they have
+been compiled for different processors or for different endiannesses.
+This option tells \fBld\fR that it should silently permit such possible
+errors.  This option should only be used with care, in cases when you
+have taken some special action that ensures that the linker errors are
+inappropriate.
+.IP "\fB\-\-no\-warn\-search\-mismatch\fR" 4
+.IX Item "--no-warn-search-mismatch"
+Normally \fBld\fR will give a warning if it finds an incompatible
+library during a library search.  This option silences the warning.
+.IP "\fB\-\-no\-whole\-archive\fR" 4
+.IX Item "--no-whole-archive"
+Turn off the effect of the \fB\-\-whole\-archive\fR option for subsequent
+archive files.
+.IP "\fB\-\-noinhibit\-exec\fR" 4
+.IX Item "--noinhibit-exec"
+Retain the executable output file whenever it is still usable.
+Normally, the linker will not produce an output file if it encounters
+errors during the link process; it exits without writing an output file
+when it issues any error whatsoever.
+.IP "\fB\-nostdlib\fR" 4
+.IX Item "-nostdlib"
+Only search library directories explicitly specified on the
+command line.  Library directories specified in linker scripts
+(including linker scripts specified on the command line) are ignored.
+.IP "\fB\-\-oformat=\fR\fIoutput-format\fR" 4
+.IX Item "--oformat=output-format"
+\&\fBld\fR may be configured to support more than one kind of object
+file.  If your \fBld\fR is configured this way, you can use the
+\&\fB\-\-oformat\fR option to specify the binary format for the output
+object file.  Even when \fBld\fR is configured to support alternative
+object formats, you don't usually need to specify this, as \fBld\fR
+should be configured to produce as a default output format the most
+usual format on each machine.  \fIoutput-format\fR is a text string, the
+name of a particular format supported by the \s-1BFD\s0 libraries.  (You can
+list the available binary formats with \fBobjdump \-i\fR.)  The script
+command \f(CW\*(C`OUTPUT_FORMAT\*(C'\fR can also specify the output format, but
+this option overrides it.
+.IP "\fB\-pie\fR" 4
+.IX Item "-pie"
+.PD 0
+.IP "\fB\-\-pic\-executable\fR" 4
+.IX Item "--pic-executable"
+.PD
+Create a position independent executable.  This is currently only supported on
+\&\s-1ELF\s0 platforms.  Position independent executables are similar to shared
+libraries in that they are relocated by the dynamic linker to the virtual
+address the \s-1OS\s0 chooses for them (which can vary between invocations).  Like
+normal dynamically linked executables they can be executed and symbols
+defined in the executable cannot be overridden by shared libraries.
+.IP "\fB\-qmagic\fR" 4
+.IX Item "-qmagic"
+This option is ignored for Linux compatibility.
+.IP "\fB\-Qy\fR" 4
+.IX Item "-Qy"
+This option is ignored for \s-1SVR4\s0 compatibility.
+.IP "\fB\-\-relax\fR" 4
+.IX Item "--relax"
+.PD 0
+.IP "\fB\-\-no\-relax\fR" 4
+.IX Item "--no-relax"
+.PD
+An option with machine dependent effects.
+This option is only supported on a few targets.
+.Sp
+On some platforms the \fB\-\-relax\fR option performs target specific,
+global optimizations that become possible when the linker resolves
+addressing in the program, such as relaxing address modes,
+synthesizing new instructions, selecting shorter version of current
+instructions, and combining constant values.
+.Sp
+On some platforms these link time global optimizations may make symbolic
+debugging of the resulting executable impossible.
+This is known to be the case for the Matsushita \s-1MN10200\s0 and \s-1MN10300\s0
+family of processors.
+.Sp
+On platforms where this is not supported, \fB\-\-relax\fR is accepted,
+but ignored.
+.Sp
+On platforms where \fB\-\-relax\fR is accepted the option
+\&\fB\-\-no\-relax\fR can be used to disable the feature.
+.IP "\fB\-\-retain\-symbols\-file=\fR\fIfilename\fR" 4
+.IX Item "--retain-symbols-file=filename"
+Retain \fIonly\fR the symbols listed in the file \fIfilename\fR,
+discarding all others.  \fIfilename\fR is simply a flat file, with one
+symbol name per line.  This option is especially useful in environments
+(such as VxWorks)
+where a large global symbol table is accumulated gradually, to conserve
+run-time memory.
+.Sp
+\&\fB\-\-retain\-symbols\-file\fR does \fInot\fR discard undefined symbols,
+or symbols needed for relocations.
+.Sp
+You may only specify \fB\-\-retain\-symbols\-file\fR once in the command
+line.  It overrides \fB\-s\fR and \fB\-S\fR.
+.IP "\fB\-rpath=\fR\fIdir\fR" 4
+.IX Item "-rpath=dir"
+Add a directory to the runtime library search path.  This is used when
+linking an \s-1ELF\s0 executable with shared objects.  All \fB\-rpath\fR
+arguments are concatenated and passed to the runtime linker, which uses
+them to locate shared objects at runtime.  The \fB\-rpath\fR option is
+also used when locating shared objects which are needed by shared
+objects explicitly included in the link; see the description of the
+\&\fB\-rpath\-link\fR option.  If \fB\-rpath\fR is not used when linking an
+\&\s-1ELF\s0 executable, the contents of the environment variable
+\&\f(CW\*(C`LD_RUN_PATH\*(C'\fR will be used if it is defined.
+.Sp
+The \fB\-rpath\fR option may also be used on SunOS.  By default, on
+SunOS, the linker will form a runtime search path out of all the
+\&\fB\-L\fR options it is given.  If a \fB\-rpath\fR option is used, the
+runtime search path will be formed exclusively using the \fB\-rpath\fR
+options, ignoring the \fB\-L\fR options.  This can be useful when using
+gcc, which adds many \fB\-L\fR options which may be on \s-1NFS\s0 mounted
+file systems.
+.Sp
+For compatibility with other \s-1ELF\s0 linkers, if the \fB\-R\fR option is
+followed by a directory name, rather than a file name, it is treated as
+the \fB\-rpath\fR option.
+.IP "\fB\-rpath\-link=\fR\fIdir\fR" 4
+.IX Item "-rpath-link=dir"
+When using \s-1ELF\s0 or SunOS, one shared library may require another.  This
+happens when an \f(CW\*(C`ld \-shared\*(C'\fR link includes a shared library as one
+of the input files.
+.Sp
+When the linker encounters such a dependency when doing a non-shared,
+non-relocatable link, it will automatically try to locate the required
+shared library and include it in the link, if it is not included
+explicitly.  In such a case, the \fB\-rpath\-link\fR option
+specifies the first set of directories to search.  The
+\&\fB\-rpath\-link\fR option may specify a sequence of directory names
+either by specifying a list of names separated by colons, or by
+appearing multiple times.
+.Sp
+This option should be used with caution as it overrides the search path
+that may have been hard compiled into a shared library. In such a case it
+is possible to use unintentionally a different search path than the
+runtime linker would do.
+.Sp
+The linker uses the following search paths to locate required shared
+libraries:
+.RS 4
+.IP "1." 4
+Any directories specified by \fB\-rpath\-link\fR options.
+.IP "2." 4
+Any directories specified by \fB\-rpath\fR options.  The difference
+between \fB\-rpath\fR and \fB\-rpath\-link\fR is that directories
+specified by \fB\-rpath\fR options are included in the executable and
+used at runtime, whereas the \fB\-rpath\-link\fR option is only effective
+at link time. Searching \fB\-rpath\fR in this way is only supported
+by native linkers and cross linkers which have been configured with
+the \fB\-\-with\-sysroot\fR option.
+.IP "3." 4
+On an \s-1ELF\s0 system, for native linkers, if the \fB\-rpath\fR and
+\&\fB\-rpath\-link\fR options were not used, search the contents of the
+environment variable \f(CW\*(C`LD_RUN_PATH\*(C'\fR.
+.IP "4." 4
+On SunOS, if the \fB\-rpath\fR option was not used, search any
+directories specified using \fB\-L\fR options.
+.IP "5." 4
+For a native linker, search the contents of the environment
+variable \f(CW\*(C`LD_LIBRARY_PATH\*(C'\fR.
+.IP "6." 4
+For a native \s-1ELF\s0 linker, the directories in \f(CW\*(C`DT_RUNPATH\*(C'\fR or
+\&\f(CW\*(C`DT_RPATH\*(C'\fR of a shared library are searched for shared
+libraries needed by it. The \f(CW\*(C`DT_RPATH\*(C'\fR entries are ignored if
+\&\f(CW\*(C`DT_RUNPATH\*(C'\fR entries exist.
+.IP "7." 4
+The default directories, normally \fI/lib\fR and \fI/usr/lib\fR.
+.IP "8." 4
+For a native linker on an \s-1ELF\s0 system, if the file \fI/etc/ld.so.conf\fR
+exists, the list of directories found in that file.
+.RE
+.RS 4
+.Sp
+If the required shared library is not found, the linker will issue a
+warning and continue with the link.
+.RE
+.IP "\fB\-shared\fR" 4
+.IX Item "-shared"
+.PD 0
+.IP "\fB\-Bshareable\fR" 4
+.IX Item "-Bshareable"
+.PD
+Create a shared library.  This is currently only supported on \s-1ELF, XCOFF\s0
+and SunOS platforms.  On SunOS, the linker will automatically create a
+shared library if the \fB\-e\fR option is not used and there are
+undefined symbols in the link.
+.IP "\fB\-\-sort\-common\fR" 4
+.IX Item "--sort-common"
+.PD 0
+.IP "\fB\-\-sort\-common=ascending\fR" 4
+.IX Item "--sort-common=ascending"
+.IP "\fB\-\-sort\-common=descending\fR" 4
+.IX Item "--sort-common=descending"
+.PD
+This option tells \fBld\fR to sort the common symbols by alignment in
+ascending or descending order when it places them in the appropriate output
+sections.  The symbol alignments considered are sixteen-byte or larger,
+eight-byte, four-byte, two-byte, and one-byte. This is to prevent gaps
+between symbols due to alignment constraints.  If no sorting order is
+specified, then descending order is assumed.
+.IP "\fB\-\-sort\-section=name\fR" 4
+.IX Item "--sort-section=name"
+This option will apply \f(CW\*(C`SORT_BY_NAME\*(C'\fR to all wildcard section
+patterns in the linker script.
+.IP "\fB\-\-sort\-section=alignment\fR" 4
+.IX Item "--sort-section=alignment"
+This option will apply \f(CW\*(C`SORT_BY_ALIGNMENT\*(C'\fR to all wildcard section
+patterns in the linker script.
+.IP "\fB\-\-split\-by\-file[=\fR\fIsize\fR\fB]\fR" 4
+.IX Item "--split-by-file[=size]"
+Similar to \fB\-\-split\-by\-reloc\fR but creates a new output section for
+each input file when \fIsize\fR is reached.  \fIsize\fR defaults to a
+size of 1 if not given.
+.IP "\fB\-\-split\-by\-reloc[=\fR\fIcount\fR\fB]\fR" 4
+.IX Item "--split-by-reloc[=count]"
+Tries to creates extra sections in the output file so that no single
+output section in the file contains more than \fIcount\fR relocations.
+This is useful when generating huge relocatable files for downloading into
+certain real time kernels with the \s-1COFF\s0 object file format; since \s-1COFF\s0
+cannot represent more than 65535 relocations in a single section.  Note
+that this will fail to work with object file formats which do not
+support arbitrary sections.  The linker will not split up individual
+input sections for redistribution, so if a single input section contains
+more than \fIcount\fR relocations one output section will contain that
+many relocations.  \fIcount\fR defaults to a value of 32768.
+.IP "\fB\-\-stats\fR" 4
+.IX Item "--stats"
+Compute and display statistics about the operation of the linker, such
+as execution time and memory usage.
+.IP "\fB\-\-sysroot=\fR\fIdirectory\fR" 4
+.IX Item "--sysroot=directory"
+Use \fIdirectory\fR as the location of the sysroot, overriding the
+configure-time default.  This option is only supported by linkers
+that were configured using \fB\-\-with\-sysroot\fR.
+.IP "\fB\-\-traditional\-format\fR" 4
+.IX Item "--traditional-format"
+For some targets, the output of \fBld\fR is different in some ways from
+the output of some existing linker.  This switch requests \fBld\fR to
+use the traditional format instead.
+.Sp
+For example, on SunOS, \fBld\fR combines duplicate entries in the
+symbol string table.  This can reduce the size of an output file with
+full debugging information by over 30 percent.  Unfortunately, the SunOS
+\&\f(CW\*(C`dbx\*(C'\fR program can not read the resulting program (\f(CW\*(C`gdb\*(C'\fR has no
+trouble).  The \fB\-\-traditional\-format\fR switch tells \fBld\fR to not
+combine duplicate entries.
+.IP "\fB\-\-section\-start=\fR\fIsectionname\fR\fB=\fR\fIorg\fR" 4
+.IX Item "--section-start=sectionname=org"
+Locate a section in the output file at the absolute
+address given by \fIorg\fR.  You may use this option as many
+times as necessary to locate multiple sections in the command
+line.
+\&\fIorg\fR must be a single hexadecimal integer;
+for compatibility with other linkers, you may omit the leading
+\&\fB0x\fR usually associated with hexadecimal values.  \fINote:\fR there
+should be no white space between \fIsectionname\fR, the equals
+sign ("\fB=\fR"), and \fIorg\fR.
+.IP "\fB\-Tbss=\fR\fIorg\fR" 4
+.IX Item "-Tbss=org"
+.PD 0
+.IP "\fB\-Tdata=\fR\fIorg\fR" 4
+.IX Item "-Tdata=org"
+.IP "\fB\-Ttext=\fR\fIorg\fR" 4
+.IX Item "-Ttext=org"
+.PD
+Same as \fB\-\-section\-start\fR, with \f(CW\*(C`.bss\*(C'\fR, \f(CW\*(C`.data\*(C'\fR or
+\&\f(CW\*(C`.text\*(C'\fR as the \fIsectionname\fR.
+.IP "\fB\-Ttext\-segment=\fR\fIorg\fR" 4
+.IX Item "-Ttext-segment=org"
+When creating an \s-1ELF\s0 executable, it will set the address of the first
+byte of the text segment.
+.IP "\fB\-Trodata\-segment=\fR\fIorg\fR" 4
+.IX Item "-Trodata-segment=org"
+When creating an \s-1ELF\s0 executable or shared object for a target where
+the read-only data is in its own segment separate from the executable
+text, it will set the address of the first byte of the read-only data segment.
+.IP "\fB\-Tldata\-segment=\fR\fIorg\fR" 4
+.IX Item "-Tldata-segment=org"
+When creating an \s-1ELF\s0 executable or shared object for x86\-64 medium memory
+model, it will set the address of the first byte of the ldata segment.
+.IP "\fB\-\-unresolved\-symbols=\fR\fImethod\fR" 4
+.IX Item "--unresolved-symbols=method"
+Determine how to handle unresolved symbols.  There are four possible
+values for \fBmethod\fR:
+.RS 4
+.IP "\fBignore-all\fR" 4
+.IX Item "ignore-all"
+Do not report any unresolved symbols.
+.IP "\fBreport-all\fR" 4
+.IX Item "report-all"
+Report all unresolved symbols.  This is the default.
+.IP "\fBignore-in-object-files\fR" 4
+.IX Item "ignore-in-object-files"
+Report unresolved symbols that are contained in shared libraries, but
+ignore them if they come from regular object files.
+.IP "\fBignore-in-shared-libs\fR" 4
+.IX Item "ignore-in-shared-libs"
+Report unresolved symbols that come from regular object files, but
+ignore them if they come from shared libraries.  This can be useful
+when creating a dynamic binary and it is known that all the shared
+libraries that it should be referencing are included on the linker's
+command line.
+.RE
+.RS 4
+.Sp
+The behaviour for shared libraries on their own can also be controlled
+by the \fB\-\-[no\-]allow\-shlib\-undefined\fR option.
+.Sp
+Normally the linker will generate an error message for each reported
+unresolved symbol but the option \fB\-\-warn\-unresolved\-symbols\fR
+can change this to a warning.
+.RE
+.IP "\fB\-\-dll\-verbose\fR" 4
+.IX Item "--dll-verbose"
+.PD 0
+.IP "\fB\-\-verbose[=\fR\fI\s-1NUMBER\s0\fR\fB]\fR" 4
+.IX Item "--verbose[=NUMBER]"
+.PD
+Display the version number for \fBld\fR and list the linker emulations
+supported.  Display which input files can and cannot be opened.  Display
+the linker script being used by the linker. If the optional \fI\s-1NUMBER\s0\fR
+argument > 1, plugin symbol status will also be displayed.
+.IP "\fB\-\-version\-script=\fR\fIversion-scriptfile\fR" 4
+.IX Item "--version-script=version-scriptfile"
+Specify the name of a version script to the linker.  This is typically
+used when creating shared libraries to specify additional information
+about the version hierarchy for the library being created.  This option
+is only fully supported on \s-1ELF\s0 platforms which support shared libraries;
+see \fB\s-1VERSION\s0\fR.  It is partially supported on \s-1PE\s0 platforms, which can
+use version scripts to filter symbol visibility in auto-export mode: any
+symbols marked \fBlocal\fR in the version script will not be exported.
+.IP "\fB\-\-warn\-common\fR" 4
+.IX Item "--warn-common"
+Warn when a common symbol is combined with another common symbol or with
+a symbol definition.  Unix linkers allow this somewhat sloppy practice,
+but linkers on some other operating systems do not.  This option allows
+you to find potential problems from combining global symbols.
+Unfortunately, some C libraries use this practice, so you may get some
+warnings about symbols in the libraries as well as in your programs.
+.Sp
+There are three kinds of global symbols, illustrated here by C examples:
+.RS 4
+.IP "\fBint i = 1;\fR" 4
+.IX Item "int i = 1;"
+A definition, which goes in the initialized data section of the output
+file.
+.IP "\fBextern int i;\fR" 4
+.IX Item "extern int i;"
+An undefined reference, which does not allocate space.
+There must be either a definition or a common symbol for the
+variable somewhere.
+.IP "\fBint i;\fR" 4
+.IX Item "int i;"
+A common symbol.  If there are only (one or more) common symbols for a
+variable, it goes in the uninitialized data area of the output file.
+The linker merges multiple common symbols for the same variable into a
+single symbol.  If they are of different sizes, it picks the largest
+size.  The linker turns a common symbol into a declaration, if there is
+a definition of the same variable.
+.RE
+.RS 4
+.Sp
+The \fB\-\-warn\-common\fR option can produce five kinds of warnings.
+Each warning consists of a pair of lines: the first describes the symbol
+just encountered, and the second describes the previous symbol
+encountered with the same name.  One or both of the two symbols will be
+a common symbol.
+.IP "1." 4
+Turning a common symbol into a reference, because there is already a
+definition for the symbol.
+.Sp
+.Vb 3
+\&        <file>(<section>): warning: common of \`<symbol>\*(Aq
+\&           overridden by definition
+\&        <file>(<section>): warning: defined here
+.Ve
+.IP "2." 4
+Turning a common symbol into a reference, because a later definition for
+the symbol is encountered.  This is the same as the previous case,
+except that the symbols are encountered in a different order.
+.Sp
+.Vb 3
+\&        <file>(<section>): warning: definition of \`<symbol>\*(Aq
+\&           overriding common
+\&        <file>(<section>): warning: common is here
+.Ve
+.IP "3." 4
+Merging a common symbol with a previous same-sized common symbol.
+.Sp
+.Vb 3
+\&        <file>(<section>): warning: multiple common
+\&           of \`<symbol>\*(Aq
+\&        <file>(<section>): warning: previous common is here
+.Ve
+.IP "4." 4
+Merging a common symbol with a previous larger common symbol.
+.Sp
+.Vb 3
+\&        <file>(<section>): warning: common of \`<symbol>\*(Aq
+\&           overridden by larger common
+\&        <file>(<section>): warning: larger common is here
+.Ve
+.IP "5." 4
+Merging a common symbol with a previous smaller common symbol.  This is
+the same as the previous case, except that the symbols are
+encountered in a different order.
+.Sp
+.Vb 3
+\&        <file>(<section>): warning: common of \`<symbol>\*(Aq
+\&           overriding smaller common
+\&        <file>(<section>): warning: smaller common is here
+.Ve
+.RE
+.RS 4
+.RE
+.IP "\fB\-\-warn\-constructors\fR" 4
+.IX Item "--warn-constructors"
+Warn if any global constructors are used.  This is only useful for a few
+object file formats.  For formats like \s-1COFF\s0 or \s-1ELF,\s0 the linker can not
+detect the use of global constructors.
+.IP "\fB\-\-warn\-multiple\-gp\fR" 4
+.IX Item "--warn-multiple-gp"
+Warn if multiple global pointer values are required in the output file.
+This is only meaningful for certain processors, such as the Alpha.
+Specifically, some processors put large-valued constants in a special
+section.  A special register (the global pointer) points into the middle
+of this section, so that constants can be loaded efficiently via a
+base-register relative addressing mode.  Since the offset in
+base-register relative mode is fixed and relatively small (e.g., 16
+bits), this limits the maximum size of the constant pool.  Thus, in
+large programs, it is often necessary to use multiple global pointer
+values in order to be able to address all possible constants.  This
+option causes a warning to be issued whenever this case occurs.
+.IP "\fB\-\-warn\-once\fR" 4
+.IX Item "--warn-once"
+Only warn once for each undefined symbol, rather than once per module
+which refers to it.
+.IP "\fB\-\-warn\-section\-align\fR" 4
+.IX Item "--warn-section-align"
+Warn if the address of an output section is changed because of
+alignment.  Typically, the alignment will be set by an input section.
+The address will only be changed if it not explicitly specified; that
+is, if the \f(CW\*(C`SECTIONS\*(C'\fR command does not specify a start address for
+the section.
+.IP "\fB\-\-warn\-shared\-textrel\fR" 4
+.IX Item "--warn-shared-textrel"
+Warn if the linker adds a \s-1DT_TEXTREL\s0 to a shared object.
+.IP "\fB\-\-warn\-alternate\-em\fR" 4
+.IX Item "--warn-alternate-em"
+Warn if an object has alternate \s-1ELF\s0 machine code.
+.IP "\fB\-\-warn\-unresolved\-symbols\fR" 4
+.IX Item "--warn-unresolved-symbols"
+If the linker is going to report an unresolved symbol (see the option
+\&\fB\-\-unresolved\-symbols\fR) it will normally generate an error.
+This option makes it generate a warning instead.
+.IP "\fB\-\-error\-unresolved\-symbols\fR" 4
+.IX Item "--error-unresolved-symbols"
+This restores the linker's default behaviour of generating errors when
+it is reporting unresolved symbols.
+.IP "\fB\-\-whole\-archive\fR" 4
+.IX Item "--whole-archive"
+For each archive mentioned on the command line after the
+\&\fB\-\-whole\-archive\fR option, include every object file in the archive
+in the link, rather than searching the archive for the required object
+files.  This is normally used to turn an archive file into a shared
+library, forcing every object to be included in the resulting shared
+library.  This option may be used more than once.
+.Sp
+Two notes when using this option from gcc: First, gcc doesn't know
+about this option, so you have to use \fB\-Wl,\-whole\-archive\fR.
+Second, don't forget to use \fB\-Wl,\-no\-whole\-archive\fR after your
+list of archives, because gcc will add its own list of archives to
+your link and you may not want this flag to affect those as well.
+.IP "\fB\-\-wrap=\fR\fIsymbol\fR" 4
+.IX Item "--wrap=symbol"
+Use a wrapper function for \fIsymbol\fR.  Any undefined reference to
+\&\fIsymbol\fR will be resolved to \f(CW\*(C`_\|_wrap_\f(CIsymbol\f(CW\*(C'\fR.  Any
+undefined reference to \f(CW\*(C`_\|_real_\f(CIsymbol\f(CW\*(C'\fR will be resolved to
+\&\fIsymbol\fR.
+.Sp
+This can be used to provide a wrapper for a system function.  The
+wrapper function should be called \f(CW\*(C`_\|_wrap_\f(CIsymbol\f(CW\*(C'\fR.  If it
+wishes to call the system function, it should call
+\&\f(CW\*(C`_\|_real_\f(CIsymbol\f(CW\*(C'\fR.
+.Sp
+Here is a trivial example:
+.Sp
+.Vb 6
+\&        void *
+\&        _\|_wrap_malloc (size_t c)
+\&        {
+\&          printf ("malloc called with %zu\en", c);
+\&          return _\|_real_malloc (c);
+\&        }
+.Ve
+.Sp
+If you link other code with this file using \fB\-\-wrap malloc\fR, then
+all calls to \f(CW\*(C`malloc\*(C'\fR will call the function \f(CW\*(C`_\|_wrap_malloc\*(C'\fR
+instead.  The call to \f(CW\*(C`_\|_real_malloc\*(C'\fR in \f(CW\*(C`_\|_wrap_malloc\*(C'\fR will
+call the real \f(CW\*(C`malloc\*(C'\fR function.
+.Sp
+You may wish to provide a \f(CW\*(C`_\|_real_malloc\*(C'\fR function as well, so that
+links without the \fB\-\-wrap\fR option will succeed.  If you do this,
+you should not put the definition of \f(CW\*(C`_\|_real_malloc\*(C'\fR in the same
+file as \f(CW\*(C`_\|_wrap_malloc\*(C'\fR; if you do, the assembler may resolve the
+call before the linker has a chance to wrap it to \f(CW\*(C`malloc\*(C'\fR.
+.IP "\fB\-\-eh\-frame\-hdr\fR" 4
+.IX Item "--eh-frame-hdr"
+Request creation of \f(CW\*(C`.eh_frame_hdr\*(C'\fR section and \s-1ELF
+\&\s0\f(CW\*(C`PT_GNU_EH_FRAME\*(C'\fR segment header.
+.IP "\fB\-\-no\-ld\-generated\-unwind\-info\fR" 4
+.IX Item "--no-ld-generated-unwind-info"
+Request creation of \f(CW\*(C`.eh_frame\*(C'\fR unwind info for linker
+generated code sections like \s-1PLT. \s0 This option is on by default
+if linker generated unwind info is supported.
+.IP "\fB\-\-enable\-new\-dtags\fR" 4
+.IX Item "--enable-new-dtags"
+.PD 0
+.IP "\fB\-\-disable\-new\-dtags\fR" 4
+.IX Item "--disable-new-dtags"
+.PD
+This linker can create the new dynamic tags in \s-1ELF.\s0 But the older \s-1ELF\s0
+systems may not understand them. If you specify
+\&\fB\-\-enable\-new\-dtags\fR, the new dynamic tags will be created as needed
+and older dynamic tags will be omitted.
+If you specify \fB\-\-disable\-new\-dtags\fR, no new dynamic tags will be
+created. By default, the new dynamic tags are not created. Note that
+those options are only available for \s-1ELF\s0 systems.
+.IP "\fB\-\-hash\-size=\fR\fInumber\fR" 4
+.IX Item "--hash-size=number"
+Set the default size of the linker's hash tables to a prime number
+close to \fInumber\fR.  Increasing this value can reduce the length of
+time it takes the linker to perform its tasks, at the expense of
+increasing the linker's memory requirements.  Similarly reducing this
+value can reduce the memory requirements at the expense of speed.
+.IP "\fB\-\-hash\-style=\fR\fIstyle\fR" 4
+.IX Item "--hash-style=style"
+Set the type of linker's hash table(s).  \fIstyle\fR can be either
+\&\f(CW\*(C`sysv\*(C'\fR for classic \s-1ELF \s0\f(CW\*(C`.hash\*(C'\fR section, \f(CW\*(C`gnu\*(C'\fR for
+new style \s-1GNU \s0\f(CW\*(C`.gnu.hash\*(C'\fR section or \f(CW\*(C`both\*(C'\fR for both
+the classic \s-1ELF \s0\f(CW\*(C`.hash\*(C'\fR and new style \s-1GNU \s0\f(CW\*(C`.gnu.hash\*(C'\fR
+hash tables.  The default is \f(CW\*(C`sysv\*(C'\fR.
+.IP "\fB\-\-compress\-debug\-sections=none\fR" 4
+.IX Item "--compress-debug-sections=none"
+.PD 0
+.IP "\fB\-\-compress\-debug\-sections=zlib\fR" 4
+.IX Item "--compress-debug-sections=zlib"
+.IP "\fB\-\-compress\-debug\-sections=zlib\-gnu\fR" 4
+.IX Item "--compress-debug-sections=zlib-gnu"
+.IP "\fB\-\-compress\-debug\-sections=zlib\-gabi\fR" 4
+.IX Item "--compress-debug-sections=zlib-gabi"
+.PD
+On \s-1ELF\s0 platforms , these options control how \s-1DWARF\s0 debug sections are
+compressed using zlib.  \fB\-\-compress\-debug\-sections=none\fR doesn't
+compress \s-1DWARF\s0 debug sections.
+\&\fB\-\-compress\-debug\-sections=zlib\-gnu\fR compresses \s-1DWARF\s0 debug
+sections and rename debug section names to begin with \fB.zdebug\fR
+instead of \fB.debug\fR.  \fB\-\-compress\-debug\-sections=zlib\fR
+and \fB\-\-compress\-debug\-sections=zlib\-gabi\fR
+compress \s-1DWARF\s0 debug sections with \s-1SHF_COMPRESSED\s0 from the \s-1ELF ABI.\s0
+The default behaviour varies depending upon the target involved and
+the configure options used to build the toolchain.  The default can be
+determined by examing the output from the linker's \fB\-\-help\fR option.
+.IP "\fB\-\-reduce\-memory\-overheads\fR" 4
+.IX Item "--reduce-memory-overheads"
+This option reduces memory requirements at ld runtime, at the expense of
+linking speed.  This was introduced to select the old O(n^2) algorithm
+for link map file generation, rather than the new O(n) algorithm which uses
+about 40% more memory for symbol storage.
+.Sp
+Another effect of the switch is to set the default hash table size to
+1021, which again saves memory at the cost of lengthening the linker's
+run time.  This is not done however if the \fB\-\-hash\-size\fR switch
+has been used.
+.Sp
+The \fB\-\-reduce\-memory\-overheads\fR switch may be also be used to
+enable other tradeoffs in future versions of the linker.
+.IP "\fB\-\-build\-id\fR" 4
+.IX Item "--build-id"
+.PD 0
+.IP "\fB\-\-build\-id=\fR\fIstyle\fR" 4
+.IX Item "--build-id=style"
+.PD
+Request the creation of a \f(CW\*(C`.note.gnu.build\-id\*(C'\fR \s-1ELF\s0 note section
+or a \f(CW\*(C`.buildid\*(C'\fR \s-1COFF\s0 section.  The contents of the note are
+unique bits identifying this linked file.  \fIstyle\fR can be
+\&\f(CW\*(C`uuid\*(C'\fR to use 128 random bits, \f(CW\*(C`sha1\*(C'\fR to use a 160\-bit
+\&\s-1SHA1\s0 hash on the normative parts of the output contents,
+\&\f(CW\*(C`md5\*(C'\fR to use a 128\-bit \s-1MD5\s0 hash on the normative parts of
+the output contents, or \f(CW\*(C`0x\f(CIhexstring\f(CW\*(C'\fR to use a chosen bit
+string specified as an even number of hexadecimal digits (\f(CW\*(C`\-\*(C'\fR and
+\&\f(CW\*(C`:\*(C'\fR characters between digit pairs are ignored).  If \fIstyle\fR
+is omitted, \f(CW\*(C`sha1\*(C'\fR is used.
+.Sp
+The \f(CW\*(C`md5\*(C'\fR and \f(CW\*(C`sha1\*(C'\fR styles produces an identifier
+that is always the same in an identical output file, but will be
+unique among all nonidentical output files.  It is not intended
+to be compared as a checksum for the file's contents.  A linked
+file may be changed later by other tools, but the build \s-1ID\s0 bit
+string identifying the original linked file does not change.
+.Sp
+Passing \f(CW\*(C`none\*(C'\fR for \fIstyle\fR disables the setting from any
+\&\f(CW\*(C`\-\-build\-id\*(C'\fR options earlier on the command line.
+.IP "\fB\-\-warn\-poison\-system\-directories\fR" 4
+.IX Item "--warn-poison-system-directories"
+Warn for \fB\-L\fR options using system directories such as
+\&\fI/usr/lib\fR when cross linking.  This option is intended for use
+in environments that want to detect and reject incorrect link settings.
+.IP "\fB\-\-no\-warn\-poison\-system\-directories\fR" 4
+.IX Item "--no-warn-poison-system-directories"
+Do not warn for \fB\-L\fR options using system directories such as
+\&\fI/usr/lib\fR when cross linking.  This option is intended for use
+in chroot environments when such directories contain the correct
+libraries for the target system rather than the host.
+.IP "\fB\-\-error\-poison\-system\-directories\fR" 4
+.IX Item "--error-poison-system-directories"
+Give an error instead of a warning for \fB\-L\fR options using
+system directories when cross linking.
+.PP
+The i386 \s-1PE\s0 linker supports the \fB\-shared\fR option, which causes
+the output to be a dynamically linked library (\s-1DLL\s0) instead of a
+normal executable.  You should name the output \f(CW\*(C`*.dll\*(C'\fR when you
+use this option.  In addition, the linker fully supports the standard
+\&\f(CW\*(C`*.def\*(C'\fR files, which may be specified on the linker command line
+like an object file (in fact, it should precede archives it exports
+symbols from, to ensure that they get linked in, just like a normal
+object file).
+.PP
+In addition to the options common to all targets, the i386 \s-1PE\s0 linker
+support additional command line options that are specific to the i386
+\&\s-1PE\s0 target.  Options that take values may be separated from their
+values by either a space or an equals sign.
+.IP "\fB\-\-add\-stdcall\-alias\fR" 4
+.IX Item "--add-stdcall-alias"
+If given, symbols with a stdcall suffix (@\fInn\fR) will be exported
+as-is and also with the suffix stripped.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-base\-file\fR \fIfile\fR" 4
+.IX Item "--base-file file"
+Use \fIfile\fR as the name of a file in which to save the base
+addresses of all the relocations needed for generating DLLs with
+\&\fIdlltool\fR.
+[This is an i386 \s-1PE\s0 specific option]
+.IP "\fB\-\-dll\fR" 4
+.IX Item "--dll"
+Create a \s-1DLL\s0 instead of a regular executable.  You may also use
+\&\fB\-shared\fR or specify a \f(CW\*(C`LIBRARY\*(C'\fR in a given \f(CW\*(C`.def\*(C'\fR
+file.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-enable\-long\-section\-names\fR" 4
+.IX Item "--enable-long-section-names"
+.PD 0
+.IP "\fB\-\-disable\-long\-section\-names\fR" 4
+.IX Item "--disable-long-section-names"
+.PD
+The \s-1PE\s0 variants of the \s-1COFF\s0 object format add an extension that permits
+the use of section names longer than eight characters, the normal limit
+for \s-1COFF. \s0 By default, these names are only allowed in object files, as
+fully-linked executable images do not carry the \s-1COFF\s0 string table required
+to support the longer names.  As a \s-1GNU\s0 extension, it is possible to
+allow their use in executable images as well, or to (probably pointlessly!)
+disallow it in object files, by using these two options.  Executable images
+generated with these long section names are slightly non-standard, carrying
+as they do a string table, and may generate confusing output when examined
+with non-GNU PE-aware tools, such as file viewers and dumpers.  However,
+\&\s-1GDB\s0 relies on the use of \s-1PE\s0 long section names to find Dwarf\-2 debug
+information sections in an executable image at runtime, and so if neither
+option is specified on the command-line, \fBld\fR will enable long
+section names, overriding the default and technically correct behaviour,
+when it finds the presence of debug information while linking an executable
+image and not stripping symbols.
+[This option is valid for all \s-1PE\s0 targeted ports of the linker]
+.IP "\fB\-\-enable\-stdcall\-fixup\fR" 4
+.IX Item "--enable-stdcall-fixup"
+.PD 0
+.IP "\fB\-\-disable\-stdcall\-fixup\fR" 4
+.IX Item "--disable-stdcall-fixup"
+.PD
+If the link finds a symbol that it cannot resolve, it will attempt to
+do \*(L"fuzzy linking\*(R" by looking for another defined symbol that differs
+only in the format of the symbol name (cdecl vs stdcall) and will
+resolve that symbol by linking to the match.  For example, the
+undefined symbol \f(CW\*(C`_foo\*(C'\fR might be linked to the function
+\&\f(CW\*(C`_foo@12\*(C'\fR, or the undefined symbol \f(CW\*(C`_bar@16\*(C'\fR might be linked
+to the function \f(CW\*(C`_bar\*(C'\fR.  When the linker does this, it prints a
+warning, since it normally should have failed to link, but sometimes
+import libraries generated from third-party dlls may need this feature
+to be usable.  If you specify \fB\-\-enable\-stdcall\-fixup\fR, this
+feature is fully enabled and warnings are not printed.  If you specify
+\&\fB\-\-disable\-stdcall\-fixup\fR, this feature is disabled and such
+mismatches are considered to be errors.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-leading\-underscore\fR" 4
+.IX Item "--leading-underscore"
+.PD 0
+.IP "\fB\-\-no\-leading\-underscore\fR" 4
+.IX Item "--no-leading-underscore"
+.PD
+For most targets default symbol-prefix is an underscore and is defined
+in target's description. By this option it is possible to
+disable/enable the default underscore symbol-prefix.
+.IP "\fB\-\-export\-all\-symbols\fR" 4
+.IX Item "--export-all-symbols"
+If given, all global symbols in the objects used to build a \s-1DLL\s0 will
+be exported by the \s-1DLL. \s0 Note that this is the default if there
+otherwise wouldn't be any exported symbols.  When symbols are
+explicitly exported via \s-1DEF\s0 files or implicitly exported via function
+attributes, the default is to not export anything else unless this
+option is given.  Note that the symbols \f(CW\*(C`DllMain@12\*(C'\fR,
+\&\f(CW\*(C`DllEntryPoint@0\*(C'\fR, \f(CW\*(C`DllMainCRTStartup@12\*(C'\fR, and
+\&\f(CW\*(C`impure_ptr\*(C'\fR will not be automatically
+exported.  Also, symbols imported from other DLLs will not be
+re-exported, nor will symbols specifying the \s-1DLL\s0's internal layout
+such as those beginning with \f(CW\*(C`_head_\*(C'\fR or ending with
+\&\f(CW\*(C`_iname\*(C'\fR.  In addition, no symbols from \f(CW\*(C`libgcc\*(C'\fR,
+\&\f(CW\*(C`libstd++\*(C'\fR, \f(CW\*(C`libmingw32\*(C'\fR, or \f(CW\*(C`crtX.o\*(C'\fR will be exported.
+Symbols whose names begin with \f(CW\*(C`_\|_rtti_\*(C'\fR or \f(CW\*(C`_\|_builtin_\*(C'\fR will
+not be exported, to help with \*(C+ DLLs.  Finally, there is an
+extensive list of cygwin-private symbols that are not exported
+(obviously, this applies on when building DLLs for cygwin targets).
+These cygwin-excludes are: \f(CW\*(C`_cygwin_dll_entry@12\*(C'\fR,
+\&\f(CW\*(C`_cygwin_crt0_common@8\*(C'\fR, \f(CW\*(C`_cygwin_noncygwin_dll_entry@12\*(C'\fR,
+\&\f(CW\*(C`_fmode\*(C'\fR, \f(CW\*(C`_impure_ptr\*(C'\fR, \f(CW\*(C`cygwin_attach_dll\*(C'\fR,
+\&\f(CW\*(C`cygwin_premain0\*(C'\fR, \f(CW\*(C`cygwin_premain1\*(C'\fR, \f(CW\*(C`cygwin_premain2\*(C'\fR,
+\&\f(CW\*(C`cygwin_premain3\*(C'\fR, and \f(CW\*(C`environ\*(C'\fR.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-exclude\-symbols\fR \fIsymbol\fR\fB,\fR\fIsymbol\fR\fB,...\fR" 4
+.IX Item "--exclude-symbols symbol,symbol,..."
+Specifies a list of symbols which should not be automatically
+exported.  The symbol names may be delimited by commas or colons.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-exclude\-all\-symbols\fR" 4
+.IX Item "--exclude-all-symbols"
+Specifies no symbols should be automatically exported.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-file\-alignment\fR" 4
+.IX Item "--file-alignment"
+Specify the file alignment.  Sections in the file will always begin at
+file offsets which are multiples of this number.  This defaults to
+512.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-heap\fR \fIreserve\fR" 4
+.IX Item "--heap reserve"
+.PD 0
+.IP "\fB\-\-heap\fR \fIreserve\fR\fB,\fR\fIcommit\fR" 4
+.IX Item "--heap reserve,commit"
+.PD
+Specify the number of bytes of memory to reserve (and optionally commit)
+to be used as heap for this program.  The default is 1MB reserved, 4K
+committed.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-image\-base\fR \fIvalue\fR" 4
+.IX Item "--image-base value"
+Use \fIvalue\fR as the base address of your program or dll.  This is
+the lowest memory location that will be used when your program or dll
+is loaded.  To reduce the need to relocate and improve performance of
+your dlls, each should have a unique base address and not overlap any
+other dlls.  The default is 0x400000 for executables, and 0x10000000
+for dlls.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-kill\-at\fR" 4
+.IX Item "--kill-at"
+If given, the stdcall suffixes (@\fInn\fR) will be stripped from
+symbols before they are exported.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-large\-address\-aware\fR" 4
+.IX Item "--large-address-aware"
+If given, the appropriate bit in the \*(L"Characteristics\*(R" field of the \s-1COFF\s0
+header is set to indicate that this executable supports virtual addresses
+greater than 2 gigabytes.  This should be used in conjunction with the /3GB
+or /USERVA=\fIvalue\fR megabytes switch in the \*(L"[operating systems]\*(R"
+section of the \s-1BOOT.INI. \s0 Otherwise, this bit has no effect.
+[This option is specific to \s-1PE\s0 targeted ports of the linker]
+.IP "\fB\-\-disable\-large\-address\-aware\fR" 4
+.IX Item "--disable-large-address-aware"
+Reverts the effect of a previous \fB\-\-large\-address\-aware\fR option.
+This is useful if \fB\-\-large\-address\-aware\fR is always set by the compiler
+driver (e.g. Cygwin gcc) and the executable does not support virtual
+addresses greater than 2 gigabytes.
+[This option is specific to \s-1PE\s0 targeted ports of the linker]
+.IP "\fB\-\-major\-image\-version\fR \fIvalue\fR" 4
+.IX Item "--major-image-version value"
+Sets the major number of the \*(L"image version\*(R".  Defaults to 1.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-major\-os\-version\fR \fIvalue\fR" 4
+.IX Item "--major-os-version value"
+Sets the major number of the \*(L"os version\*(R".  Defaults to 4.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-major\-subsystem\-version\fR \fIvalue\fR" 4
+.IX Item "--major-subsystem-version value"
+Sets the major number of the \*(L"subsystem version\*(R".  Defaults to 4.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-minor\-image\-version\fR \fIvalue\fR" 4
+.IX Item "--minor-image-version value"
+Sets the minor number of the \*(L"image version\*(R".  Defaults to 0.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-minor\-os\-version\fR \fIvalue\fR" 4
+.IX Item "--minor-os-version value"
+Sets the minor number of the \*(L"os version\*(R".  Defaults to 0.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-minor\-subsystem\-version\fR \fIvalue\fR" 4
+.IX Item "--minor-subsystem-version value"
+Sets the minor number of the \*(L"subsystem version\*(R".  Defaults to 0.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-output\-def\fR \fIfile\fR" 4
+.IX Item "--output-def file"
+The linker will create the file \fIfile\fR which will contain a \s-1DEF\s0
+file corresponding to the \s-1DLL\s0 the linker is generating.  This \s-1DEF\s0 file
+(which should be called \f(CW\*(C`*.def\*(C'\fR) may be used to create an import
+library with \f(CW\*(C`dlltool\*(C'\fR or may be used as a reference to
+automatically or implicitly exported symbols.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-out\-implib\fR \fIfile\fR" 4
+.IX Item "--out-implib file"
+The linker will create the file \fIfile\fR which will contain an
+import lib corresponding to the \s-1DLL\s0 the linker is generating. This
+import lib (which should be called \f(CW\*(C`*.dll.a\*(C'\fR or \f(CW\*(C`*.a\*(C'\fR
+may be used to link clients against the generated \s-1DLL\s0; this behaviour
+makes it possible to skip a separate \f(CW\*(C`dlltool\*(C'\fR import library
+creation step.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-enable\-auto\-image\-base\fR" 4
+.IX Item "--enable-auto-image-base"
+.PD 0
+.IP "\fB\-\-enable\-auto\-image\-base=\fR\fIvalue\fR" 4
+.IX Item "--enable-auto-image-base=value"
+.PD
+Automatically choose the image base for DLLs, optionally starting with base
+\&\fIvalue\fR, unless one is specified using the \f(CW\*(C`\-\-image\-base\*(C'\fR argument.
+By using a hash generated from the dllname to create unique image bases
+for each \s-1DLL,\s0 in-memory collisions and relocations which can delay program
+execution are avoided.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-disable\-auto\-image\-base\fR" 4
+.IX Item "--disable-auto-image-base"
+Do not automatically generate a unique image base.  If there is no
+user-specified image base (\f(CW\*(C`\-\-image\-base\*(C'\fR) then use the platform
+default.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-dll\-search\-prefix\fR \fIstring\fR" 4
+.IX Item "--dll-search-prefix string"
+When linking dynamically to a dll without an import library,
+search for \f(CW\*(C`<string><basename>.dll\*(C'\fR in preference to
+\&\f(CW\*(C`lib<basename>.dll\*(C'\fR. This behaviour allows easy distinction
+between DLLs built for the various \*(L"subplatforms\*(R": native, cygwin,
+uwin, pw, etc.  For instance, cygwin DLLs typically use
+\&\f(CW\*(C`\-\-dll\-search\-prefix=cyg\*(C'\fR.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-enable\-auto\-import\fR" 4
+.IX Item "--enable-auto-import"
+Do sophisticated linking of \f(CW\*(C`_symbol\*(C'\fR to \f(CW\*(C`_\|_imp_\|_symbol\*(C'\fR for
+\&\s-1DATA\s0 imports from DLLs, and create the necessary thunking symbols when
+building the import libraries with those \s-1DATA\s0 exports. Note: Use of the
+\&'auto\-import' extension will cause the text section of the image file
+to be made writable. This does not conform to the PE-COFF format
+specification published by Microsoft.
+.Sp
+Note \- use of the 'auto\-import' extension will also cause read only
+data which would normally be placed into the .rdata section to be
+placed into the .data section instead.  This is in order to work
+around a problem with consts that is described here:
+http://www.cygwin.com/ml/cygwin/2004\-09/msg01101.html
+.Sp
+Using 'auto\-import' generally will 'just work' \*(-- but sometimes you may
+see this message:
+.Sp
+"variable '<var>' can't be auto-imported. Please read the
+documentation for ld's \f(CW\*(C`\-\-enable\-auto\-import\*(C'\fR for details."
+.Sp
+This message occurs when some (sub)expression accesses an address
+ultimately given by the sum of two constants (Win32 import tables only
+allow one).  Instances where this may occur include accesses to member
+fields of struct variables imported from a \s-1DLL,\s0 as well as using a
+constant index into an array variable imported from a \s-1DLL. \s0 Any
+multiword variable (arrays, structs, long long, etc) may trigger
+this error condition.  However, regardless of the exact data type
+of the offending exported variable, ld will always detect it, issue
+the warning, and exit.
+.Sp
+There are several ways to address this difficulty, regardless of the
+data type of the exported variable:
+.Sp
+One way is to use \-\-enable\-runtime\-pseudo\-reloc switch. This leaves the task
+of adjusting references in your client code for runtime environment, so
+this method works only when runtime environment supports this feature.
+.Sp
+A second solution is to force one of the 'constants' to be a variable \*(--
+that is, unknown and un-optimizable at compile time.  For arrays,
+there are two possibilities: a) make the indexee (the array's address)
+a variable, or b) make the 'constant' index a variable.  Thus:
+.Sp
+.Vb 3
+\&        extern type extern_array[];
+\&        extern_array[1] \-\->
+\&           { volatile type *t=extern_array; t[1] }
+.Ve
+.Sp
+or
+.Sp
+.Vb 3
+\&        extern type extern_array[];
+\&        extern_array[1] \-\->
+\&           { volatile int t=1; extern_array[t] }
+.Ve
+.Sp
+For structs (and most other multiword data types) the only option
+is to make the struct itself (or the long long, or the ...) variable:
+.Sp
+.Vb 3
+\&        extern struct s extern_struct;
+\&        extern_struct.field \-\->
+\&           { volatile struct s *t=&extern_struct; t\->field }
+.Ve
+.Sp
+or
+.Sp
+.Vb 3
+\&        extern long long extern_ll;
+\&        extern_ll \-\->
+\&          { volatile long long * local_ll=&extern_ll; *local_ll }
+.Ve
+.Sp
+A third method of dealing with this difficulty is to abandon
+\&'auto\-import' for the offending symbol and mark it with
+\&\f(CW\*(C`_\|_declspec(dllimport)\*(C'\fR.  However, in practice that
+requires using compile-time #defines to indicate whether you are
+building a \s-1DLL,\s0 building client code that will link to the \s-1DLL,\s0 or
+merely building/linking to a static library.   In making the choice
+between the various methods of resolving the 'direct address with
+constant offset' problem, you should consider typical real-world usage:
+.Sp
+Original:
+.Sp
+.Vb 7
+\&        \-\-foo.h
+\&        extern int arr[];
+\&        \-\-foo.c
+\&        #include "foo.h"
+\&        void main(int argc, char **argv){
+\&          printf("%d\en",arr[1]);
+\&        }
+.Ve
+.Sp
+Solution 1:
+.Sp
+.Vb 9
+\&        \-\-foo.h
+\&        extern int arr[];
+\&        \-\-foo.c
+\&        #include "foo.h"
+\&        void main(int argc, char **argv){
+\&          /* This workaround is for win32 and cygwin; do not "optimize" */
+\&          volatile int *parr = arr;
+\&          printf("%d\en",parr[1]);
+\&        }
+.Ve
+.Sp
+Solution 2:
+.Sp
+.Vb 10
+\&        \-\-foo.h
+\&        /* Note: auto\-export is assumed (no _\|_declspec(dllexport)) */
+\&        #if (defined(_WIN32) || defined(_\|_CYGWIN_\|_)) && \e
+\&          !(defined(FOO_BUILD_DLL) || defined(FOO_STATIC))
+\&        #define FOO_IMPORT _\|_declspec(dllimport)
+\&        #else
+\&        #define FOO_IMPORT
+\&        #endif
+\&        extern FOO_IMPORT int arr[];
+\&        \-\-foo.c
+\&        #include "foo.h"
+\&        void main(int argc, char **argv){
+\&          printf("%d\en",arr[1]);
+\&        }
+.Ve
+.Sp
+A fourth way to avoid this problem is to re-code your
+library to use a functional interface rather than a data interface
+for the offending variables (e.g. \fIset_foo()\fR and \fIget_foo()\fR accessor
+functions).
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-disable\-auto\-import\fR" 4
+.IX Item "--disable-auto-import"
+Do not attempt to do sophisticated linking of \f(CW\*(C`_symbol\*(C'\fR to
+\&\f(CW\*(C`_\|_imp_\|_symbol\*(C'\fR for \s-1DATA\s0 imports from DLLs.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-enable\-runtime\-pseudo\-reloc\fR" 4
+.IX Item "--enable-runtime-pseudo-reloc"
+If your code contains expressions described in \-\-enable\-auto\-import section,
+that is, \s-1DATA\s0 imports from \s-1DLL\s0 with non-zero offset, this switch will create
+a vector of 'runtime pseudo relocations' which can be used by runtime
+environment to adjust references to such data in your client code.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-disable\-runtime\-pseudo\-reloc\fR" 4
+.IX Item "--disable-runtime-pseudo-reloc"
+Do not create pseudo relocations for non-zero offset \s-1DATA\s0 imports from
+DLLs.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-enable\-extra\-pe\-debug\fR" 4
+.IX Item "--enable-extra-pe-debug"
+Show additional debug info related to auto-import symbol thunking.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-section\-alignment\fR" 4
+.IX Item "--section-alignment"
+Sets the section alignment.  Sections in memory will always begin at
+addresses which are a multiple of this number.  Defaults to 0x1000.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-stack\fR \fIreserve\fR" 4
+.IX Item "--stack reserve"
+.PD 0
+.IP "\fB\-\-stack\fR \fIreserve\fR\fB,\fR\fIcommit\fR" 4
+.IX Item "--stack reserve,commit"
+.PD
+Specify the number of bytes of memory to reserve (and optionally commit)
+to be used as stack for this program.  The default is 2MB reserved, 4K
+committed.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.IP "\fB\-\-subsystem\fR \fIwhich\fR" 4
+.IX Item "--subsystem which"
+.PD 0
+.IP "\fB\-\-subsystem\fR \fIwhich\fR\fB:\fR\fImajor\fR" 4
+.IX Item "--subsystem which:major"
+.IP "\fB\-\-subsystem\fR \fIwhich\fR\fB:\fR\fImajor\fR\fB.\fR\fIminor\fR" 4
+.IX Item "--subsystem which:major.minor"
+.PD
+Specifies the subsystem under which your program will execute.  The
+legal values for \fIwhich\fR are \f(CW\*(C`native\*(C'\fR, \f(CW\*(C`windows\*(C'\fR,
+\&\f(CW\*(C`console\*(C'\fR, \f(CW\*(C`posix\*(C'\fR, and \f(CW\*(C`xbox\*(C'\fR.  You may optionally set
+the subsystem version also.  Numeric values are also accepted for
+\&\fIwhich\fR.
+[This option is specific to the i386 \s-1PE\s0 targeted port of the linker]
+.Sp
+The following options set flags in the \f(CW\*(C`DllCharacteristics\*(C'\fR field
+of the \s-1PE\s0 file header:
+[These options are specific to \s-1PE\s0 targeted ports of the linker]
+.IP "\fB\-\-high\-entropy\-va\fR" 4
+.IX Item "--high-entropy-va"
+Image is compatible with 64\-bit address space layout randomization
+(\s-1ASLR\s0).
+.IP "\fB\-\-dynamicbase\fR" 4
+.IX Item "--dynamicbase"
+The image base address may be relocated using address space layout
+randomization (\s-1ASLR\s0).  This feature was introduced with \s-1MS\s0 Windows
+Vista for i386 \s-1PE\s0 targets.
+.IP "\fB\-\-forceinteg\fR" 4
+.IX Item "--forceinteg"
+Code integrity checks are enforced.
+.IP "\fB\-\-nxcompat\fR" 4
+.IX Item "--nxcompat"
+The image is compatible with the Data Execution Prevention.
+This feature was introduced with \s-1MS\s0 Windows \s-1XP SP2\s0 for i386 \s-1PE\s0 targets.
+.IP "\fB\-\-no\-isolation\fR" 4
+.IX Item "--no-isolation"
+Although the image understands isolation, do not isolate the image.
+.IP "\fB\-\-no\-seh\fR" 4
+.IX Item "--no-seh"
+The image does not use \s-1SEH.\s0 No \s-1SE\s0 handler may be called from
+this image.
+.IP "\fB\-\-no\-bind\fR" 4
+.IX Item "--no-bind"
+Do not bind this image.
+.IP "\fB\-\-wdmdriver\fR" 4
+.IX Item "--wdmdriver"
+The driver uses the \s-1MS\s0 Windows Driver Model.
+.IP "\fB\-\-tsaware\fR" 4
+.IX Item "--tsaware"
+The image is Terminal Server aware.
+.IP "\fB\-\-insert\-timestamp\fR" 4
+.IX Item "--insert-timestamp"
+.PD 0
+.IP "\fB\-\-no\-insert\-timestamp\fR" 4
+.IX Item "--no-insert-timestamp"
+.PD
+Insert a real timestamp into the image.  This is the default behaviour
+as it matches legacy code and it means that the image will work with
+other, proprietary tools.  The problem with this default is that it
+will result in slightly different images being produced each time the
+same sources are linked.  The option \fB\-\-no\-insert\-timestamp\fR
+can be used to insert a zero value for the timestamp, this ensuring
+that binaries produced from identical sources will compare
+identically.
+.PP
+The C6X uClinux target uses a binary format called \s-1DSBT\s0 to support shared
+libraries.  Each shared library in the system needs to have a unique index;
+all executables use an index of 0.
+.IP "\fB\-\-dsbt\-size\fR \fIsize\fR" 4
+.IX Item "--dsbt-size size"
+This option sets the number of entries in the \s-1DSBT\s0 of the current executable
+or shared library to \fIsize\fR.  The default is to create a table with 64
+entries.
+.IP "\fB\-\-dsbt\-index\fR \fIindex\fR" 4
+.IX Item "--dsbt-index index"
+This option sets the \s-1DSBT\s0 index of the current executable or shared library
+to \fIindex\fR.  The default is 0, which is appropriate for generating
+executables.  If a shared library is generated with a \s-1DSBT\s0 index of 0, the
+\&\f(CW\*(C`R_C6000_DSBT_INDEX\*(C'\fR relocs are copied into the output file.
+.Sp
+The \fB\-\-no\-merge\-exidx\-entries\fR switch disables the merging of adjacent
+exidx entries in frame unwind info.
+.PP
+The 68HC11 and 68HC12 linkers support specific options to control the
+memory bank switching mapping and trampoline code generation.
+.IP "\fB\-\-no\-trampoline\fR" 4
+.IX Item "--no-trampoline"
+This option disables the generation of trampoline. By default a trampoline
+is generated for each far function which is called using a \f(CW\*(C`jsr\*(C'\fR
+instruction (this happens when a pointer to a far function is taken).
+.IP "\fB\-\-bank\-window\fR \fIname\fR" 4
+.IX Item "--bank-window name"
+This option indicates to the linker the name of the memory region in
+the \fB\s-1MEMORY\s0\fR specification that describes the memory bank window.
+The definition of such region is then used by the linker to compute
+paging and addresses within the memory window.
+.PP
+The following options are supported to control handling of \s-1GOT\s0 generation
+when linking for 68K targets.
+.IP "\fB\-\-got=\fR\fItype\fR" 4
+.IX Item "--got=type"
+This option tells the linker which \s-1GOT\s0 generation scheme to use.
+\&\fItype\fR should be one of \fBsingle\fR, \fBnegative\fR,
+\&\fBmultigot\fR or \fBtarget\fR.  For more information refer to the
+Info entry for \fIld\fR.
+.PP
+The following options are supported to control microMIPS instruction
+generation when linking for \s-1MIPS\s0 targets.
+.IP "\fB\-\-insn32\fR" 4
+.IX Item "--insn32"
+.PD 0
+.IP "\fB\-\-no\-insn32\fR" 4
+.IX Item "--no-insn32"
+.PD
+These options control the choice of microMIPS instructions used in code
+generated by the linker, such as that in the \s-1PLT\s0 or lazy binding stubs,
+or in relaxation.  If \fB\-\-insn32\fR is used, then the linker only uses
+32\-bit instruction encodings.  By default or if \fB\-\-no\-insn32\fR is
+used, all instruction encodings are used, including 16\-bit ones where
+possible.
+.SH "ENVIRONMENT"
+.IX Header "ENVIRONMENT"
+You can change the behaviour of \fBld\fR with the environment variables
+\&\f(CW\*(C`GNUTARGET\*(C'\fR,
+\&\f(CW\*(C`LDEMULATION\*(C'\fR and \f(CW\*(C`COLLECT_NO_DEMANGLE\*(C'\fR.
+.PP
+\&\f(CW\*(C`GNUTARGET\*(C'\fR determines the input-file object format if you don't
+use \fB\-b\fR (or its synonym \fB\-\-format\fR).  Its value should be one
+of the \s-1BFD\s0 names for an input format.  If there is no
+\&\f(CW\*(C`GNUTARGET\*(C'\fR in the environment, \fBld\fR uses the natural format
+of the target. If \f(CW\*(C`GNUTARGET\*(C'\fR is set to \f(CW\*(C`default\*(C'\fR then \s-1BFD\s0
+attempts to discover the input format by examining binary input files;
+this method often succeeds, but there are potential ambiguities, since
+there is no method of ensuring that the magic number used to specify
+object-file formats is unique.  However, the configuration procedure for
+\&\s-1BFD\s0 on each system places the conventional format for that system first
+in the search-list, so ambiguities are resolved in favor of convention.
+.PP
+\&\f(CW\*(C`LDEMULATION\*(C'\fR determines the default emulation if you don't use the
+\&\fB\-m\fR option.  The emulation can affect various aspects of linker
+behaviour, particularly the default linker script.  You can list the
+available emulations with the \fB\-\-verbose\fR or \fB\-V\fR options.  If
+the \fB\-m\fR option is not used, and the \f(CW\*(C`LDEMULATION\*(C'\fR environment
+variable is not defined, the default emulation depends upon how the
+linker was configured.
+.PP
+Normally, the linker will default to demangling symbols.  However, if
+\&\f(CW\*(C`COLLECT_NO_DEMANGLE\*(C'\fR is set in the environment, then it will
+default to not demangling symbols.  This environment variable is used in
+a similar fashion by the \f(CW\*(C`gcc\*(C'\fR linker wrapper program.  The default
+may be overridden by the \fB\-\-demangle\fR and \fB\-\-no\-demangle\fR
+options.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIar\fR\|(1), \fInm\fR\|(1), \fIobjcopy\fR\|(1), \fIobjdump\fR\|(1), \fIreadelf\fR\|(1) and
+the Info entries for \fIbinutils\fR and
+\&\fIld\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-nlmconv.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-nlmconv.1
new file mode 100644
index 0000000..f6128cb
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-nlmconv.1
@@ -0,0 +1,247 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "NLMCONV 1"
+.TH NLMCONV 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+nlmconv \- converts object code into an NLM.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+nlmconv [\fB\-I\fR \fIbfdname\fR|\fB\-\-input\-target=\fR\fIbfdname\fR]
+        [\fB\-O\fR \fIbfdname\fR|\fB\-\-output\-target=\fR\fIbfdname\fR]
+        [\fB\-T\fR \fIheaderfile\fR|\fB\-\-header\-file=\fR\fIheaderfile\fR]
+        [\fB\-d\fR|\fB\-\-debug\fR] [\fB\-l\fR \fIlinker\fR|\fB\-\-linker=\fR\fIlinker\fR]
+        [\fB\-h\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR]
+        \fIinfile\fR \fIoutfile\fR
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBnlmconv\fR converts the relocatable \fBi386\fR object file
+\&\fIinfile\fR into the NetWare Loadable Module \fIoutfile\fR, optionally
+reading \fIheaderfile\fR for \s-1NLM\s0 header information.  For instructions
+on writing the \s-1NLM\s0 command file language used in header files, see the
+\&\fBlinkers\fR section, \fB\s-1NLMLINK\s0\fR in particular, of the \fI\s-1NLM\s0
+Development and Tools Overview\fR, which is part of the \s-1NLM\s0 Software
+Developer's Kit (\*(L"\s-1NLM SDK\*(R"\s0), available from Novell, Inc.
+\&\fBnlmconv\fR uses the \s-1GNU\s0 Binary File Descriptor library to read
+\&\fIinfile\fR;
+.PP
+\&\fBnlmconv\fR can perform a link step.  In other words, you can list
+more than one object file for input if you list them in the definitions
+file (rather than simply specifying one input file on the command line).
+In this case, \fBnlmconv\fR calls the linker for you.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-I\fR \fIbfdname\fR" 4
+.IX Item "-I bfdname"
+.PD 0
+.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4
+.IX Item "--input-target=bfdname"
+.PD
+Object format of the input file.  \fBnlmconv\fR can usually determine
+the format of a given file (so no default is necessary).
+.IP "\fB\-O\fR \fIbfdname\fR" 4
+.IX Item "-O bfdname"
+.PD 0
+.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4
+.IX Item "--output-target=bfdname"
+.PD
+Object format of the output file.  \fBnlmconv\fR infers the output
+format based on the input format, e.g. for a \fBi386\fR input file the
+output format is \fBnlm32\-i386\fR.
+.IP "\fB\-T\fR \fIheaderfile\fR" 4
+.IX Item "-T headerfile"
+.PD 0
+.IP "\fB\-\-header\-file=\fR\fIheaderfile\fR" 4
+.IX Item "--header-file=headerfile"
+.PD
+Reads \fIheaderfile\fR for \s-1NLM\s0 header information.  For instructions on
+writing the \s-1NLM\s0 command file language used in header files, see see the
+\&\fBlinkers\fR section, of the \fI\s-1NLM\s0 Development and Tools
+Overview\fR, which is part of the \s-1NLM\s0 Software Developer's Kit, available
+from Novell, Inc.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-\-debug\fR" 4
+.IX Item "--debug"
+.PD
+Displays (on standard error) the linker command line used by \fBnlmconv\fR.
+.IP "\fB\-l\fR \fIlinker\fR" 4
+.IX Item "-l linker"
+.PD 0
+.IP "\fB\-\-linker=\fR\fIlinker\fR" 4
+.IX Item "--linker=linker"
+.PD
+Use \fIlinker\fR for any linking.  \fIlinker\fR can be an absolute or a
+relative pathname.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Prints a usage summary.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Prints the version number for \fBnlmconv\fR.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-nm.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-nm.1
new file mode 100644
index 0000000..b45b23d
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-nm.1
@@ -0,0 +1,536 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "NM 1"
+.TH NM 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+nm \- list symbols from object files
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+nm [\fB\-A\fR|\fB\-o\fR|\fB\-\-print\-file\-name\fR] [\fB\-a\fR|\fB\-\-debug\-syms\fR]
+   [\fB\-B\fR|\fB\-\-format=bsd\fR] [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]]
+   [\fB\-D\fR|\fB\-\-dynamic\fR] [\fB\-f\fR\fIformat\fR|\fB\-\-format=\fR\fIformat\fR]
+   [\fB\-g\fR|\fB\-\-extern\-only\fR] [\fB\-h\fR|\fB\-\-help\fR]
+   [\fB\-l\fR|\fB\-\-line\-numbers\fR] [\fB\-n\fR|\fB\-v\fR|\fB\-\-numeric\-sort\fR]
+   [\fB\-P\fR|\fB\-\-portability\fR] [\fB\-p\fR|\fB\-\-no\-sort\fR]
+   [\fB\-r\fR|\fB\-\-reverse\-sort\fR] [\fB\-S\fR|\fB\-\-print\-size\fR]
+   [\fB\-s\fR|\fB\-\-print\-armap\fR] [\fB\-t\fR \fIradix\fR|\fB\-\-radix=\fR\fIradix\fR]
+   [\fB\-u\fR|\fB\-\-undefined\-only\fR] [\fB\-V\fR|\fB\-\-version\fR]
+   [\fB\-X 32_64\fR] [\fB\-\-defined\-only\fR] [\fB\-\-no\-demangle\fR]
+   [\fB\-\-plugin\fR \fIname\fR] [\fB\-\-size\-sort\fR] [\fB\-\-special\-syms\fR]
+   [\fB\-\-synthetic\fR] [\fB\-\-target=\fR\fIbfdname\fR]
+   [\fIobjfile\fR...]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\s-1GNU \s0\fBnm\fR lists the symbols from object files \fIobjfile\fR....
+If no object files are listed as arguments, \fBnm\fR assumes the file
+\&\fIa.out\fR.
+.PP
+For each symbol, \fBnm\fR shows:
+.IP "\(bu" 4
+The symbol value, in the radix selected by options (see below), or
+hexadecimal by default.
+.IP "\(bu" 4
+The symbol type.  At least the following types are used; others are, as
+well, depending on the object file format.  If lowercase, the symbol is
+usually local; if uppercase, the symbol is global (external).  There
+are however a few lowercase symbols that are shown for special global
+symbols (\f(CW\*(C`u\*(C'\fR, \f(CW\*(C`v\*(C'\fR and \f(CW\*(C`w\*(C'\fR).
+.RS 4
+.ie n .IP """A""" 4
+.el .IP "\f(CWA\fR" 4
+.IX Item "A"
+The symbol's value is absolute, and will not be changed by further
+linking.
+.ie n .IP """B""" 4
+.el .IP "\f(CWB\fR" 4
+.IX Item "B"
+.PD 0
+.ie n .IP """b""" 4
+.el .IP "\f(CWb\fR" 4
+.IX Item "b"
+.PD
+The symbol is in the uninitialized data section (known as \s-1BSS\s0).
+.ie n .IP """C""" 4
+.el .IP "\f(CWC\fR" 4
+.IX Item "C"
+The symbol is common.  Common symbols are uninitialized data.  When
+linking, multiple common symbols may appear with the same name.  If the
+symbol is defined anywhere, the common symbols are treated as undefined
+references.
+.ie n .IP """D""" 4
+.el .IP "\f(CWD\fR" 4
+.IX Item "D"
+.PD 0
+.ie n .IP """d""" 4
+.el .IP "\f(CWd\fR" 4
+.IX Item "d"
+.PD
+The symbol is in the initialized data section.
+.ie n .IP """G""" 4
+.el .IP "\f(CWG\fR" 4
+.IX Item "G"
+.PD 0
+.ie n .IP """g""" 4
+.el .IP "\f(CWg\fR" 4
+.IX Item "g"
+.PD
+The symbol is in an initialized data section for small objects.  Some
+object file formats permit more efficient access to small data objects,
+such as a global int variable as opposed to a large global array.
+.ie n .IP """i""" 4
+.el .IP "\f(CWi\fR" 4
+.IX Item "i"
+For \s-1PE\s0 format files this indicates that the symbol is in a section
+specific to the implementation of DLLs.  For \s-1ELF\s0 format files this
+indicates that the symbol is an indirect function.  This is a \s-1GNU\s0
+extension to the standard set of \s-1ELF\s0 symbol types.  It indicates a
+symbol which if referenced by a relocation does not evaluate to its
+address, but instead must be invoked at runtime.  The runtime
+execution will then return the value to be used in the relocation.
+.ie n .IP """I""" 4
+.el .IP "\f(CWI\fR" 4
+.IX Item "I"
+The symbol is an indirect reference to another symbol.
+.ie n .IP """N""" 4
+.el .IP "\f(CWN\fR" 4
+.IX Item "N"
+The symbol is a debugging symbol.
+.ie n .IP """p""" 4
+.el .IP "\f(CWp\fR" 4
+.IX Item "p"
+The symbols is in a stack unwind section.
+.ie n .IP """R""" 4
+.el .IP "\f(CWR\fR" 4
+.IX Item "R"
+.PD 0
+.ie n .IP """r""" 4
+.el .IP "\f(CWr\fR" 4
+.IX Item "r"
+.PD
+The symbol is in a read only data section.
+.ie n .IP """S""" 4
+.el .IP "\f(CWS\fR" 4
+.IX Item "S"
+.PD 0
+.ie n .IP """s""" 4
+.el .IP "\f(CWs\fR" 4
+.IX Item "s"
+.PD
+The symbol is in an uninitialized data section for small objects.
+.ie n .IP """T""" 4
+.el .IP "\f(CWT\fR" 4
+.IX Item "T"
+.PD 0
+.ie n .IP """t""" 4
+.el .IP "\f(CWt\fR" 4
+.IX Item "t"
+.PD
+The symbol is in the text (code) section.
+.ie n .IP """U""" 4
+.el .IP "\f(CWU\fR" 4
+.IX Item "U"
+The symbol is undefined.
+.ie n .IP """u""" 4
+.el .IP "\f(CWu\fR" 4
+.IX Item "u"
+The symbol is a unique global symbol.  This is a \s-1GNU\s0 extension to the
+standard set of \s-1ELF\s0 symbol bindings.  For such a symbol the dynamic linker
+will make sure that in the entire process there is just one symbol with
+this name and type in use.
+.ie n .IP """V""" 4
+.el .IP "\f(CWV\fR" 4
+.IX Item "V"
+.PD 0
+.ie n .IP """v""" 4
+.el .IP "\f(CWv\fR" 4
+.IX Item "v"
+.PD
+The symbol is a weak object.  When a weak defined symbol is linked with
+a normal defined symbol, the normal defined symbol is used with no error.
+When a weak undefined symbol is linked and the symbol is not defined,
+the value of the weak symbol becomes zero with no error.  On some
+systems, uppercase indicates that a default value has been specified.
+.ie n .IP """W""" 4
+.el .IP "\f(CWW\fR" 4
+.IX Item "W"
+.PD 0
+.ie n .IP """w""" 4
+.el .IP "\f(CWw\fR" 4
+.IX Item "w"
+.PD
+The symbol is a weak symbol that has not been specifically tagged as a
+weak object symbol.  When a weak defined symbol is linked with a normal
+defined symbol, the normal defined symbol is used with no error.
+When a weak undefined symbol is linked and the symbol is not defined,
+the value of the symbol is determined in a system-specific manner without
+error.  On some systems, uppercase indicates that a default value has been
+specified.
+.ie n .IP """\-""" 4
+.el .IP "\f(CW\-\fR" 4
+.IX Item "-"
+The symbol is a stabs symbol in an a.out object file.  In this case, the
+next values printed are the stabs other field, the stabs desc field, and
+the stab type.  Stabs symbols are used to hold debugging information.
+.ie n .IP """?""" 4
+.el .IP "\f(CW?\fR" 4
+.IX Item "?"
+The symbol type is unknown, or object file format specific.
+.RE
+.RS 4
+.RE
+.IP "\(bu" 4
+The symbol name.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The long and short forms of options, shown here as alternatives, are
+equivalent.
+.IP "\fB\-A\fR" 4
+.IX Item "-A"
+.PD 0
+.IP "\fB\-o\fR" 4
+.IX Item "-o"
+.IP "\fB\-\-print\-file\-name\fR" 4
+.IX Item "--print-file-name"
+.PD
+Precede each symbol by the name of the input file (or archive member)
+in which it was found, rather than identifying the input file once only,
+before all of its symbols.
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-debug\-syms\fR" 4
+.IX Item "--debug-syms"
+.PD
+Display all symbols, even debugger-only symbols; normally these are not
+listed.
+.IP "\fB\-B\fR" 4
+.IX Item "-B"
+The same as \fB\-\-format=bsd\fR (for compatibility with the \s-1MIPS \s0\fBnm\fR).
+.IP "\fB\-C\fR" 4
+.IX Item "-C"
+.PD 0
+.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4
+.IX Item "--demangle[=style]"
+.PD
+Decode (\fIdemangle\fR) low-level symbol names into user-level names.
+Besides removing any initial underscore prepended by the system, this
+makes \*(C+ function names readable. Different compilers have different
+mangling styles. The optional demangling style argument can be used to
+choose an appropriate demangling style for your compiler.
+.IP "\fB\-\-no\-demangle\fR" 4
+.IX Item "--no-demangle"
+Do not demangle low-level symbol names.  This is the default.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+.PD 0
+.IP "\fB\-\-dynamic\fR" 4
+.IX Item "--dynamic"
+.PD
+Display the dynamic symbols rather than the normal symbols.  This is
+only meaningful for dynamic objects, such as certain types of shared
+libraries.
+.IP "\fB\-f\fR \fIformat\fR" 4
+.IX Item "-f format"
+.PD 0
+.IP "\fB\-\-format=\fR\fIformat\fR" 4
+.IX Item "--format=format"
+.PD
+Use the output format \fIformat\fR, which can be \f(CW\*(C`bsd\*(C'\fR,
+\&\f(CW\*(C`sysv\*(C'\fR, or \f(CW\*(C`posix\*(C'\fR.  The default is \f(CW\*(C`bsd\*(C'\fR.
+Only the first character of \fIformat\fR is significant; it can be
+either upper or lower case.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+.PD 0
+.IP "\fB\-\-extern\-only\fR" 4
+.IX Item "--extern-only"
+.PD
+Display only external symbols.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Show a summary of the options to \fBnm\fR and exit.
+.IP "\fB\-l\fR" 4
+.IX Item "-l"
+.PD 0
+.IP "\fB\-\-line\-numbers\fR" 4
+.IX Item "--line-numbers"
+.PD
+For each symbol, use debugging information to try to find a filename and
+line number.  For a defined symbol, look for the line number of the
+address of the symbol.  For an undefined symbol, look for the line
+number of a relocation entry which refers to the symbol.  If line number
+information can be found, print it after the other symbol information.
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+.PD 0
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.IP "\fB\-\-numeric\-sort\fR" 4
+.IX Item "--numeric-sort"
+.PD
+Sort symbols numerically by their addresses, rather than alphabetically
+by their names.
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-no\-sort\fR" 4
+.IX Item "--no-sort"
+.PD
+Do not bother to sort the symbols in any order; print them in the order
+encountered.
+.IP "\fB\-P\fR" 4
+.IX Item "-P"
+.PD 0
+.IP "\fB\-\-portability\fR" 4
+.IX Item "--portability"
+.PD
+Use the \s-1POSIX.2\s0 standard output format instead of the default format.
+Equivalent to \fB\-f posix\fR.
+.IP "\fB\-r\fR" 4
+.IX Item "-r"
+.PD 0
+.IP "\fB\-\-reverse\-sort\fR" 4
+.IX Item "--reverse-sort"
+.PD
+Reverse the order of the sort (whether numeric or alphabetic); let the
+last come first.
+.IP "\fB\-S\fR" 4
+.IX Item "-S"
+.PD 0
+.IP "\fB\-\-print\-size\fR" 4
+.IX Item "--print-size"
+.PD
+Print both value and size of defined symbols for the \f(CW\*(C`bsd\*(C'\fR output style.
+This option has no effect for object formats that do not record symbol
+sizes, unless \fB\-\-size\-sort\fR is also used in which case a
+calculated size is displayed.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-print\-armap\fR" 4
+.IX Item "--print-armap"
+.PD
+When listing symbols from archive members, include the index: a mapping
+(stored in the archive by \fBar\fR or \fBranlib\fR) of which modules
+contain definitions for which names.
+.IP "\fB\-t\fR \fIradix\fR" 4
+.IX Item "-t radix"
+.PD 0
+.IP "\fB\-\-radix=\fR\fIradix\fR" 4
+.IX Item "--radix=radix"
+.PD
+Use \fIradix\fR as the radix for printing the symbol values.  It must be
+\&\fBd\fR for decimal, \fBo\fR for octal, or \fBx\fR for hexadecimal.
+.IP "\fB\-u\fR" 4
+.IX Item "-u"
+.PD 0
+.IP "\fB\-\-undefined\-only\fR" 4
+.IX Item "--undefined-only"
+.PD
+Display only undefined symbols (those external to each object file).
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Show the version number of \fBnm\fR and exit.
+.IP "\fB\-X\fR" 4
+.IX Item "-X"
+This option is ignored for compatibility with the \s-1AIX\s0 version of
+\&\fBnm\fR.  It takes one parameter which must be the string
+\&\fB32_64\fR.  The default mode of \s-1AIX \s0\fBnm\fR corresponds
+to \fB\-X 32\fR, which is not supported by \s-1GNU \s0\fBnm\fR.
+.IP "\fB\-\-defined\-only\fR" 4
+.IX Item "--defined-only"
+Display only defined symbols for each object file.
+.IP "\fB\-\-plugin\fR \fIname\fR" 4
+.IX Item "--plugin name"
+Load the plugin called \fIname\fR to add support for extra target
+types.  This option is only available if the toolchain has been built
+with plugin support enabled.
+.IP "\fB\-\-size\-sort\fR" 4
+.IX Item "--size-sort"
+Sort symbols by size.  For \s-1ELF\s0 objects symbol sizes are read from the
+\&\s-1ELF,\s0 for other object types the symbol sizes are computed as the
+difference between the value of the symbol and the value of the symbol
+with the next higher value.  If the \f(CW\*(C`bsd\*(C'\fR output format is used
+the size of the symbol is printed, rather than the value, and
+\&\fB\-S\fR must be used in order both size and value to be printed.
+.IP "\fB\-\-special\-syms\fR" 4
+.IX Item "--special-syms"
+Display symbols which have a target-specific special meaning.  These
+symbols are usually used by the target for some special processing and
+are not normally helpful when included in the normal symbol lists.
+For example for \s-1ARM\s0 targets this option would skip the mapping symbols
+used to mark transitions between \s-1ARM\s0 code, \s-1THUMB\s0 code and data.
+.IP "\fB\-\-synthetic\fR" 4
+.IX Item "--synthetic"
+Include synthetic symbols in the output.  These are special symbols
+created by the linker for various purposes.  They are not shown by
+default since they are not part of the binary's original source code.
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+Specify an object code format other than your system's default format.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-objcopy.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-objcopy.1
new file mode 100644
index 0000000..2a71155
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-objcopy.1
@@ -0,0 +1,1138 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "OBJCOPY 1"
+.TH OBJCOPY 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+objcopy \- copy and translate object files
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+objcopy [\fB\-F\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR]
+        [\fB\-I\fR \fIbfdname\fR|\fB\-\-input\-target=\fR\fIbfdname\fR]
+        [\fB\-O\fR \fIbfdname\fR|\fB\-\-output\-target=\fR\fIbfdname\fR]
+        [\fB\-B\fR \fIbfdarch\fR|\fB\-\-binary\-architecture=\fR\fIbfdarch\fR]
+        [\fB\-S\fR|\fB\-\-strip\-all\fR]
+        [\fB\-g\fR|\fB\-\-strip\-debug\fR]
+        [\fB\-K\fR \fIsymbolname\fR|\fB\-\-keep\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-N\fR \fIsymbolname\fR|\fB\-\-strip\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-\-strip\-unneeded\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-G\fR \fIsymbolname\fR|\fB\-\-keep\-global\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-\-localize\-hidden\fR]
+        [\fB\-L\fR \fIsymbolname\fR|\fB\-\-localize\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-\-globalize\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-W\fR \fIsymbolname\fR|\fB\-\-weaken\-symbol=\fR\fIsymbolname\fR]
+        [\fB\-w\fR|\fB\-\-wildcard\fR]
+        [\fB\-x\fR|\fB\-\-discard\-all\fR]
+        [\fB\-X\fR|\fB\-\-discard\-locals\fR]
+        [\fB\-b\fR \fIbyte\fR|\fB\-\-byte=\fR\fIbyte\fR]
+        [\fB\-i\fR [\fIbreadth\fR]|\fB\-\-interleave\fR[=\fIbreadth\fR]]
+        [\fB\-\-interleave\-width=\fR\fIwidth\fR]
+        [\fB\-j\fR \fIsectionpattern\fR|\fB\-\-only\-section=\fR\fIsectionpattern\fR]
+        [\fB\-R\fR \fIsectionpattern\fR|\fB\-\-remove\-section=\fR\fIsectionpattern\fR]
+        [\fB\-p\fR|\fB\-\-preserve\-dates\fR]
+        [\fB\-D\fR|\fB\-\-enable\-deterministic\-archives\fR]
+        [\fB\-U\fR|\fB\-\-disable\-deterministic\-archives\fR]
+        [\fB\-\-debugging\fR]
+        [\fB\-\-gap\-fill=\fR\fIval\fR]
+        [\fB\-\-pad\-to=\fR\fIaddress\fR]
+        [\fB\-\-set\-start=\fR\fIval\fR]
+        [\fB\-\-adjust\-start=\fR\fIincr\fR]
+        [\fB\-\-change\-addresses=\fR\fIincr\fR]
+        [\fB\-\-change\-section\-address\fR \fIsectionpattern\fR{=,+,\-}\fIval\fR]
+        [\fB\-\-change\-section\-lma\fR \fIsectionpattern\fR{=,+,\-}\fIval\fR]
+        [\fB\-\-change\-section\-vma\fR \fIsectionpattern\fR{=,+,\-}\fIval\fR]
+        [\fB\-\-change\-warnings\fR] [\fB\-\-no\-change\-warnings\fR]
+        [\fB\-\-set\-section\-flags\fR \fIsectionpattern\fR=\fIflags\fR]
+        [\fB\-\-add\-section\fR \fIsectionname\fR=\fIfilename\fR]
+        [\fB\-\-dump\-section\fR \fIsectionname\fR=\fIfilename\fR]
+        [\fB\-\-update\-section\fR \fIsectionname\fR=\fIfilename\fR]
+        [\fB\-\-rename\-section\fR \fIoldname\fR=\fInewname\fR[,\fIflags\fR]]
+        [\fB\-\-long\-section\-names\fR {enable,disable,keep}]
+        [\fB\-\-change\-leading\-char\fR] [\fB\-\-remove\-leading\-char\fR]
+        [\fB\-\-reverse\-bytes=\fR\fInum\fR]
+        [\fB\-\-srec\-len=\fR\fIival\fR] [\fB\-\-srec\-forceS3\fR]
+        [\fB\-\-redefine\-sym\fR \fIold\fR=\fInew\fR]
+        [\fB\-\-redefine\-syms=\fR\fIfilename\fR]
+        [\fB\-\-weaken\fR]
+        [\fB\-\-keep\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-strip\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-strip\-unneeded\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-keep\-global\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-localize\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-globalize\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-weaken\-symbols=\fR\fIfilename\fR]
+        [\fB\-\-add\-symbol\fR \fIname\fR=[\fIsection\fR:]\fIvalue\fR[,\fIflags\fR]
+        [\fB\-\-alt\-machine\-code=\fR\fIindex\fR]
+        [\fB\-\-prefix\-symbols=\fR\fIstring\fR]
+        [\fB\-\-prefix\-sections=\fR\fIstring\fR]
+        [\fB\-\-prefix\-alloc\-sections=\fR\fIstring\fR]
+        [\fB\-\-add\-gnu\-debuglink=\fR\fIpath-to-file\fR]
+        [\fB\-\-keep\-file\-symbols\fR]
+        [\fB\-\-only\-keep\-debug\fR]
+        [\fB\-\-strip\-dwo\fR]
+        [\fB\-\-extract\-dwo\fR]
+        [\fB\-\-extract\-symbol\fR]
+        [\fB\-\-writable\-text\fR]
+        [\fB\-\-readonly\-text\fR]
+        [\fB\-\-pure\fR]
+        [\fB\-\-impure\fR]
+        [\fB\-\-file\-alignment=\fR\fInum\fR]
+        [\fB\-\-heap=\fR\fIsize\fR]
+        [\fB\-\-image\-base=\fR\fIaddress\fR]
+        [\fB\-\-section\-alignment=\fR\fInum\fR]
+        [\fB\-\-stack=\fR\fIsize\fR]
+        [\fB\-\-subsystem=\fR\fIwhich\fR:\fImajor\fR.\fIminor\fR]
+        [\fB\-\-compress\-debug\-sections\fR]
+        [\fB\-\-decompress\-debug\-sections\fR]
+        [\fB\-\-elf\-stt\-common=\fR\fIval\fR]
+        [\fB\-v\fR|\fB\-\-verbose\fR]
+        [\fB\-V\fR|\fB\-\-version\fR]
+        [\fB\-\-help\fR] [\fB\-\-info\fR]
+        \fIinfile\fR [\fIoutfile\fR]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+The \s-1GNU \s0\fBobjcopy\fR utility copies the contents of an object
+file to another.  \fBobjcopy\fR uses the \s-1GNU BFD\s0 Library to
+read and write the object files.  It can write the destination object
+file in a format different from that of the source object file.  The
+exact behavior of \fBobjcopy\fR is controlled by command-line options.
+Note that \fBobjcopy\fR should be able to copy a fully linked file
+between any two formats. However, copying a relocatable object file
+between any two formats may not work as expected.
+.PP
+\&\fBobjcopy\fR creates temporary files to do its translations and
+deletes them afterward.  \fBobjcopy\fR uses \s-1BFD\s0 to do all its
+translation work; it has access to all the formats described in \s-1BFD\s0
+and thus is able to recognize most formats without being told
+explicitly.
+.PP
+\&\fBobjcopy\fR can be used to generate S\-records by using an output
+target of \fBsrec\fR (e.g., use \fB\-O srec\fR).
+.PP
+\&\fBobjcopy\fR can be used to generate a raw binary file by using an
+output target of \fBbinary\fR (e.g., use \fB\-O binary\fR).  When
+\&\fBobjcopy\fR generates a raw binary file, it will essentially produce
+a memory dump of the contents of the input object file.  All symbols and
+relocation information will be discarded.  The memory dump will start at
+the load address of the lowest section copied into the output file.
+.PP
+When generating an S\-record or a raw binary file, it may be helpful to
+use \fB\-S\fR to remove sections containing debugging information.  In
+some cases \fB\-R\fR will be useful to remove sections which contain
+information that is not needed by the binary file.
+.PP
+Note\-\-\-\fBobjcopy\fR is not able to change the endianness of its input
+files.  If the input format has an endianness (some formats do not),
+\&\fBobjcopy\fR can only copy the inputs into file formats that have the
+same endianness or which have no endianness (e.g., \fBsrec\fR).
+(However, see the \fB\-\-reverse\-bytes\fR option.)
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fIinfile\fR" 4
+.IX Item "infile"
+.PD 0
+.IP "\fIoutfile\fR" 4
+.IX Item "outfile"
+.PD
+The input and output files, respectively.
+If you do not specify \fIoutfile\fR, \fBobjcopy\fR creates a
+temporary file and destructively renames the result with
+the name of \fIinfile\fR.
+.IP "\fB\-I\fR \fIbfdname\fR" 4
+.IX Item "-I bfdname"
+.PD 0
+.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4
+.IX Item "--input-target=bfdname"
+.PD
+Consider the source file's object format to be \fIbfdname\fR, rather than
+attempting to deduce it.
+.IP "\fB\-O\fR \fIbfdname\fR" 4
+.IX Item "-O bfdname"
+.PD 0
+.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4
+.IX Item "--output-target=bfdname"
+.PD
+Write the output file using the object format \fIbfdname\fR.
+.IP "\fB\-F\fR \fIbfdname\fR" 4
+.IX Item "-F bfdname"
+.PD 0
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+.PD
+Use \fIbfdname\fR as the object format for both the input and the output
+file; i.e., simply transfer data from source to destination with no
+translation.
+.IP "\fB\-B\fR \fIbfdarch\fR" 4
+.IX Item "-B bfdarch"
+.PD 0
+.IP "\fB\-\-binary\-architecture=\fR\fIbfdarch\fR" 4
+.IX Item "--binary-architecture=bfdarch"
+.PD
+Useful when transforming a architecture-less input file into an object file.
+In this case the output architecture can be set to \fIbfdarch\fR.  This
+option will be ignored if the input file has a known \fIbfdarch\fR.  You
+can access this binary data inside a program by referencing the special
+symbols that are created by the conversion process.  These symbols are
+called _binary_\fIobjfile\fR_start, _binary_\fIobjfile\fR_end and
+_binary_\fIobjfile\fR_size.  e.g. you can transform a picture file into
+an object file and then access it in your code using these symbols.
+.IP "\fB\-j\fR \fIsectionpattern\fR" 4
+.IX Item "-j sectionpattern"
+.PD 0
+.IP "\fB\-\-only\-section=\fR\fIsectionpattern\fR" 4
+.IX Item "--only-section=sectionpattern"
+.PD
+Copy only the indicated sections from the input file to the output file.
+This option may be given more than once.  Note that using this option
+inappropriately may make the output file unusable.  Wildcard
+characters are accepted in \fIsectionpattern\fR.
+.IP "\fB\-R\fR \fIsectionpattern\fR" 4
+.IX Item "-R sectionpattern"
+.PD 0
+.IP "\fB\-\-remove\-section=\fR\fIsectionpattern\fR" 4
+.IX Item "--remove-section=sectionpattern"
+.PD
+Remove any section matching \fIsectionpattern\fR from the output file.
+This option may be given more than once.  Note that using this option
+inappropriately may make the output file unusable.  Wildcard
+characters are accepted in \fIsectionpattern\fR.  Using both the
+\&\fB\-j\fR and \fB\-R\fR options together results in undefined
+behaviour.
+.IP "\fB\-S\fR" 4
+.IX Item "-S"
+.PD 0
+.IP "\fB\-\-strip\-all\fR" 4
+.IX Item "--strip-all"
+.PD
+Do not copy relocation and symbol information from the source file.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+.PD 0
+.IP "\fB\-\-strip\-debug\fR" 4
+.IX Item "--strip-debug"
+.PD
+Do not copy debugging symbols or sections from the source file.
+.IP "\fB\-\-strip\-unneeded\fR" 4
+.IX Item "--strip-unneeded"
+Strip all symbols that are not needed for relocation processing.
+.IP "\fB\-K\fR \fIsymbolname\fR" 4
+.IX Item "-K symbolname"
+.PD 0
+.IP "\fB\-\-keep\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--keep-symbol=symbolname"
+.PD
+When stripping symbols, keep symbol \fIsymbolname\fR even if it would
+normally be stripped.  This option may be given more than once.
+.IP "\fB\-N\fR \fIsymbolname\fR" 4
+.IX Item "-N symbolname"
+.PD 0
+.IP "\fB\-\-strip\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--strip-symbol=symbolname"
+.PD
+Do not copy symbol \fIsymbolname\fR from the source file.  This option
+may be given more than once.
+.IP "\fB\-\-strip\-unneeded\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--strip-unneeded-symbol=symbolname"
+Do not copy symbol \fIsymbolname\fR from the source file unless it is needed
+by a relocation.  This option may be given more than once.
+.IP "\fB\-G\fR \fIsymbolname\fR" 4
+.IX Item "-G symbolname"
+.PD 0
+.IP "\fB\-\-keep\-global\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--keep-global-symbol=symbolname"
+.PD
+Keep only symbol \fIsymbolname\fR global.  Make all other symbols local
+to the file, so that they are not visible externally.  This option may
+be given more than once.
+.IP "\fB\-\-localize\-hidden\fR" 4
+.IX Item "--localize-hidden"
+In an \s-1ELF\s0 object, mark all symbols that have hidden or internal visibility
+as local.  This option applies on top of symbol-specific localization options
+such as \fB\-L\fR.
+.IP "\fB\-L\fR \fIsymbolname\fR" 4
+.IX Item "-L symbolname"
+.PD 0
+.IP "\fB\-\-localize\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--localize-symbol=symbolname"
+.PD
+Make symbol \fIsymbolname\fR local to the file, so that it is not
+visible externally.  This option may be given more than once.
+.IP "\fB\-W\fR \fIsymbolname\fR" 4
+.IX Item "-W symbolname"
+.PD 0
+.IP "\fB\-\-weaken\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--weaken-symbol=symbolname"
+.PD
+Make symbol \fIsymbolname\fR weak. This option may be given more than once.
+.IP "\fB\-\-globalize\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--globalize-symbol=symbolname"
+Give symbol \fIsymbolname\fR global scoping so that it is visible
+outside of the file in which it is defined.  This option may be given
+more than once.
+.IP "\fB\-w\fR" 4
+.IX Item "-w"
+.PD 0
+.IP "\fB\-\-wildcard\fR" 4
+.IX Item "--wildcard"
+.PD
+Permit regular expressions in \fIsymbolname\fRs used in other command
+line options.  The question mark (?), asterisk (*), backslash (\e) and
+square brackets ([]) operators can be used anywhere in the symbol
+name.  If the first character of the symbol name is the exclamation
+point (!) then the sense of the switch is reversed for that symbol.
+For example:
+.Sp
+.Vb 1
+\&          \-w \-W !foo \-W fo*
+.Ve
+.Sp
+would cause objcopy to weaken all symbols that start with \*(L"fo\*(R"
+except for the symbol \*(L"foo\*(R".
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+.PD 0
+.IP "\fB\-\-discard\-all\fR" 4
+.IX Item "--discard-all"
+.PD
+Do not copy non-global symbols from the source file.
+.IP "\fB\-X\fR" 4
+.IX Item "-X"
+.PD 0
+.IP "\fB\-\-discard\-locals\fR" 4
+.IX Item "--discard-locals"
+.PD
+Do not copy compiler-generated local symbols.
+(These usually start with \fBL\fR or \fB.\fR.)
+.IP "\fB\-b\fR \fIbyte\fR" 4
+.IX Item "-b byte"
+.PD 0
+.IP "\fB\-\-byte=\fR\fIbyte\fR" 4
+.IX Item "--byte=byte"
+.PD
+If interleaving has been enabled via the \fB\-\-interleave\fR option
+then start the range of bytes to keep at the \fIbyte\fRth byte.
+\&\fIbyte\fR can be in the range from 0 to \fIbreadth\fR\-1, where
+\&\fIbreadth\fR is the value given by the \fB\-\-interleave\fR option.
+.IP "\fB\-i [\fR\fIbreadth\fR\fB]\fR" 4
+.IX Item "-i [breadth]"
+.PD 0
+.IP "\fB\-\-interleave[=\fR\fIbreadth\fR\fB]\fR" 4
+.IX Item "--interleave[=breadth]"
+.PD
+Only copy a range out of every \fIbreadth\fR bytes.  (Header data is
+not affected).  Select which byte in the range begins the copy with
+the \fB\-\-byte\fR option.  Select the width of the range with the
+\&\fB\-\-interleave\-width\fR option.
+.Sp
+This option is useful for creating files to program \s-1ROM. \s0 It is
+typically used with an \f(CW\*(C`srec\*(C'\fR output target.  Note that
+\&\fBobjcopy\fR will complain if you do not specify the
+\&\fB\-\-byte\fR option as well.
+.Sp
+The default interleave breadth is 4, so with \fB\-\-byte\fR set to 0,
+\&\fBobjcopy\fR would copy the first byte out of every four bytes
+from the input to the output.
+.IP "\fB\-\-interleave\-width=\fR\fIwidth\fR" 4
+.IX Item "--interleave-width=width"
+When used with the \fB\-\-interleave\fR option, copy \fIwidth\fR
+bytes at a time.  The start of the range of bytes to be copied is set
+by the \fB\-\-byte\fR option, and the extent of the range is set with
+the \fB\-\-interleave\fR option.
+.Sp
+The default value for this option is 1.  The value of \fIwidth\fR plus
+the \fIbyte\fR value set by the \fB\-\-byte\fR option must not exceed
+the interleave breadth set by the \fB\-\-interleave\fR option.
+.Sp
+This option can be used to create images for two 16\-bit flashes interleaved
+in a 32\-bit bus by passing \fB\-b 0 \-i 4 \-\-interleave\-width=2\fR
+and \fB\-b 2 \-i 4 \-\-interleave\-width=2\fR to two \fBobjcopy\fR
+commands.  If the input was '12345678' then the outputs would be
+\&'1256' and '3478' respectively.
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-preserve\-dates\fR" 4
+.IX Item "--preserve-dates"
+.PD
+Set the access and modification dates of the output file to be the same
+as those of the input file.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+.PD 0
+.IP "\fB\-\-enable\-deterministic\-archives\fR" 4
+.IX Item "--enable-deterministic-archives"
+.PD
+Operate in \fIdeterministic\fR mode.  When copying archive members
+and writing the archive index, use zero for UIDs, GIDs, timestamps,
+and use consistent file modes for all files.
+.Sp
+If \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR, then this mode is on by default.
+It can be disabled with the \fB\-U\fR option, below.
+.IP "\fB\-U\fR" 4
+.IX Item "-U"
+.PD 0
+.IP "\fB\-\-disable\-deterministic\-archives\fR" 4
+.IX Item "--disable-deterministic-archives"
+.PD
+Do \fInot\fR operate in \fIdeterministic\fR mode.  This is the
+inverse of the \fB\-D\fR option, above: when copying archive members
+and writing the archive index, use their actual \s-1UID, GID,\s0 timestamp,
+and file mode values.
+.Sp
+This is the default unless \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR.
+.IP "\fB\-\-debugging\fR" 4
+.IX Item "--debugging"
+Convert debugging information, if possible.  This is not the default
+because only certain debugging formats are supported, and the
+conversion process can be time consuming.
+.IP "\fB\-\-gap\-fill\fR \fIval\fR" 4
+.IX Item "--gap-fill val"
+Fill gaps between sections with \fIval\fR.  This operation applies to
+the \fIload address\fR (\s-1LMA\s0) of the sections.  It is done by increasing
+the size of the section with the lower address, and filling in the extra
+space created with \fIval\fR.
+.IP "\fB\-\-pad\-to\fR \fIaddress\fR" 4
+.IX Item "--pad-to address"
+Pad the output file up to the load address \fIaddress\fR.  This is
+done by increasing the size of the last section.  The extra space is
+filled in with the value specified by \fB\-\-gap\-fill\fR (default zero).
+.IP "\fB\-\-set\-start\fR \fIval\fR" 4
+.IX Item "--set-start val"
+Set the start address of the new file to \fIval\fR.  Not all object file
+formats support setting the start address.
+.IP "\fB\-\-change\-start\fR \fIincr\fR" 4
+.IX Item "--change-start incr"
+.PD 0
+.IP "\fB\-\-adjust\-start\fR \fIincr\fR" 4
+.IX Item "--adjust-start incr"
+.PD
+Change the start address by adding \fIincr\fR.  Not all object file
+formats support setting the start address.
+.IP "\fB\-\-change\-addresses\fR \fIincr\fR" 4
+.IX Item "--change-addresses incr"
+.PD 0
+.IP "\fB\-\-adjust\-vma\fR \fIincr\fR" 4
+.IX Item "--adjust-vma incr"
+.PD
+Change the \s-1VMA\s0 and \s-1LMA\s0 addresses of all sections, as well as the start
+address, by adding \fIincr\fR.  Some object file formats do not permit
+section addresses to be changed arbitrarily.  Note that this does not
+relocate the sections; if the program expects sections to be loaded at a
+certain address, and this option is used to change the sections such
+that they are loaded at a different address, the program may fail.
+.IP "\fB\-\-change\-section\-address\fR \fIsectionpattern\fR\fB{=,+,\-}\fR\fIval\fR" 4
+.IX Item "--change-section-address sectionpattern{=,+,-}val"
+.PD 0
+.IP "\fB\-\-adjust\-section\-vma\fR \fIsectionpattern\fR\fB{=,+,\-}\fR\fIval\fR" 4
+.IX Item "--adjust-section-vma sectionpattern{=,+,-}val"
+.PD
+Set or change both the \s-1VMA\s0 address and the \s-1LMA\s0 address of any section
+matching \fIsectionpattern\fR.  If \fB=\fR is used, the section
+address is set to \fIval\fR.  Otherwise, \fIval\fR is added to or
+subtracted from the section address.  See the comments under
+\&\fB\-\-change\-addresses\fR, above. If \fIsectionpattern\fR does not
+match any sections in the input file, a warning will be issued, unless
+\&\fB\-\-no\-change\-warnings\fR is used.
+.IP "\fB\-\-change\-section\-lma\fR \fIsectionpattern\fR\fB{=,+,\-}\fR\fIval\fR" 4
+.IX Item "--change-section-lma sectionpattern{=,+,-}val"
+Set or change the \s-1LMA\s0 address of any sections matching
+\&\fIsectionpattern\fR.  The \s-1LMA\s0 address is the address where the
+section will be loaded into memory at program load time.  Normally
+this is the same as the \s-1VMA\s0 address, which is the address of the
+section at program run time, but on some systems, especially those
+where a program is held in \s-1ROM,\s0 the two can be different.  If \fB=\fR
+is used, the section address is set to \fIval\fR.  Otherwise,
+\&\fIval\fR is added to or subtracted from the section address.  See the
+comments under \fB\-\-change\-addresses\fR, above.  If
+\&\fIsectionpattern\fR does not match any sections in the input file, a
+warning will be issued, unless \fB\-\-no\-change\-warnings\fR is used.
+.IP "\fB\-\-change\-section\-vma\fR \fIsectionpattern\fR\fB{=,+,\-}\fR\fIval\fR" 4
+.IX Item "--change-section-vma sectionpattern{=,+,-}val"
+Set or change the \s-1VMA\s0 address of any section matching
+\&\fIsectionpattern\fR.  The \s-1VMA\s0 address is the address where the
+section will be located once the program has started executing.
+Normally this is the same as the \s-1LMA\s0 address, which is the address
+where the section will be loaded into memory, but on some systems,
+especially those where a program is held in \s-1ROM,\s0 the two can be
+different.  If \fB=\fR is used, the section address is set to
+\&\fIval\fR.  Otherwise, \fIval\fR is added to or subtracted from the
+section address.  See the comments under \fB\-\-change\-addresses\fR,
+above.  If \fIsectionpattern\fR does not match any sections in the
+input file, a warning will be issued, unless
+\&\fB\-\-no\-change\-warnings\fR is used.
+.IP "\fB\-\-change\-warnings\fR" 4
+.IX Item "--change-warnings"
+.PD 0
+.IP "\fB\-\-adjust\-warnings\fR" 4
+.IX Item "--adjust-warnings"
+.PD
+If \fB\-\-change\-section\-address\fR or \fB\-\-change\-section\-lma\fR or
+\&\fB\-\-change\-section\-vma\fR is used, and the section pattern does not
+match any sections, issue a warning.  This is the default.
+.IP "\fB\-\-no\-change\-warnings\fR" 4
+.IX Item "--no-change-warnings"
+.PD 0
+.IP "\fB\-\-no\-adjust\-warnings\fR" 4
+.IX Item "--no-adjust-warnings"
+.PD
+Do not issue a warning if \fB\-\-change\-section\-address\fR or
+\&\fB\-\-adjust\-section\-lma\fR or \fB\-\-adjust\-section\-vma\fR is used, even
+if the section pattern does not match any sections.
+.IP "\fB\-\-set\-section\-flags\fR \fIsectionpattern\fR\fB=\fR\fIflags\fR" 4
+.IX Item "--set-section-flags sectionpattern=flags"
+Set the flags for any sections matching \fIsectionpattern\fR.  The
+\&\fIflags\fR argument is a comma separated string of flag names.  The
+recognized names are \fBalloc\fR, \fBcontents\fR, \fBload\fR,
+\&\fBnoload\fR, \fBreadonly\fR, \fBcode\fR, \fBdata\fR, \fBrom\fR,
+\&\fBshare\fR, and \fBdebug\fR.  You can set the \fBcontents\fR flag
+for a section which does not have contents, but it is not meaningful
+to clear the \fBcontents\fR flag of a section which does have
+contents\*(--just remove the section instead.  Not all flags are
+meaningful for all object file formats.
+.IP "\fB\-\-add\-section\fR \fIsectionname\fR\fB=\fR\fIfilename\fR" 4
+.IX Item "--add-section sectionname=filename"
+Add a new section named \fIsectionname\fR while copying the file.  The
+contents of the new section are taken from the file \fIfilename\fR.  The
+size of the section will be the size of the file.  This option only
+works on file formats which can support sections with arbitrary names.
+Note \- it may be necessary to use the \fB\-\-set\-section\-flags\fR
+option to set the attributes of the newly created section.
+.IP "\fB\-\-dump\-section\fR \fIsectionname\fR\fB=\fR\fIfilename\fR" 4
+.IX Item "--dump-section sectionname=filename"
+Place the contents of section named \fIsectionname\fR into the file
+\&\fIfilename\fR, overwriting any contents that may have been there
+previously.  This option is the inverse of \fB\-\-add\-section\fR.
+This option is similar to the \fB\-\-only\-section\fR option except
+that it does not create a formatted file, it just dumps the contents
+as raw binary data, without applying any relocations.  The option can
+be specified more than once.
+.IP "\fB\-\-update\-section\fR \fIsectionname\fR\fB=\fR\fIfilename\fR" 4
+.IX Item "--update-section sectionname=filename"
+Replace the existing contents of a section named \fIsectionname\fR
+with the contents of file \fIfilename\fR.  The size of the section
+will be adjusted to the size of the file.  The section flags for
+\&\fIsectionname\fR will be unchanged.  For \s-1ELF\s0 format files the section
+to segment mapping will also remain unchanged, something which is not
+possible using \fB\-\-remove\-section\fR followed by
+\&\fB\-\-add\-section\fR.  The option can be specified more than once.
+.Sp
+Note \- it is possible to use \fB\-\-rename\-section\fR and
+\&\fB\-\-update\-section\fR to both update and rename a section from one
+command line.  In this case, pass the original section name to
+\&\fB\-\-update\-section\fR, and the original and new section names to
+\&\fB\-\-rename\-section\fR.
+.IP "\fB\-\-add\-symbol\fR \fIname\fR\fB=[\fR\fIsection\fR\fB:]\fR\fIvalue\fR\fB[,\fR\fIflags\fR\fB]\fR" 4
+.IX Item "--add-symbol name=[section:]value[,flags]"
+Add a new symbol named \fIname\fR while copying the file.  This option may be
+specified multiple times.  If the \fIsection\fR is given, the symbol will be
+associated with and relative to that section, otherwise it will be an \s-1ABS\s0
+symbol.  Specifying an undefined section will result in a fatal error.  There
+is no check for the value, it will be taken as specified.  Symbol flags can
+be specified and not all flags will be meaningful for all object file
+formats.  By default, the symbol will be global.  The special flag
+\&'before=\fIothersym\fR' will insert the new symbol in front of the specified
+\&\fIothersym\fR, otherwise the symbol(s) will be added at the end of the
+symbol table in the order they appear.
+.IP "\fB\-\-rename\-section\fR \fIoldname\fR\fB=\fR\fInewname\fR\fB[,\fR\fIflags\fR\fB]\fR" 4
+.IX Item "--rename-section oldname=newname[,flags]"
+Rename a section from \fIoldname\fR to \fInewname\fR, optionally
+changing the section's flags to \fIflags\fR in the process.  This has
+the advantage over usng a linker script to perform the rename in that
+the output stays as an object file and does not become a linked
+executable.
+.Sp
+This option is particularly helpful when the input format is binary,
+since this will always create a section called .data.  If for example,
+you wanted instead to create a section called .rodata containing binary
+data you could use the following command line to achieve it:
+.Sp
+.Vb 3
+\&          objcopy \-I binary \-O <output_format> \-B <architecture> \e
+\&           \-\-rename\-section .data=.rodata,alloc,load,readonly,data,contents \e
+\&           <input_binary_file> <output_object_file>
+.Ve
+.IP "\fB\-\-long\-section\-names {enable,disable,keep}\fR" 4
+.IX Item "--long-section-names {enable,disable,keep}"
+Controls the handling of long section names when processing \f(CW\*(C`COFF\*(C'\fR
+and \f(CW\*(C`PE\-COFF\*(C'\fR object formats.  The default behaviour, \fBkeep\fR,
+is to preserve long section names if any are present in the input file.
+The \fBenable\fR and \fBdisable\fR options forcibly enable or disable
+the use of long section names in the output object; when \fBdisable\fR
+is in effect, any long section names in the input object will be truncated.
+The \fBenable\fR option will only emit long section names if any are
+present in the inputs; this is mostly the same as \fBkeep\fR, but it
+is left undefined whether the \fBenable\fR option might force the
+creation of an empty string table in the output file.
+.IP "\fB\-\-change\-leading\-char\fR" 4
+.IX Item "--change-leading-char"
+Some object file formats use special characters at the start of
+symbols.  The most common such character is underscore, which compilers
+often add before every symbol.  This option tells \fBobjcopy\fR to
+change the leading character of every symbol when it converts between
+object file formats.  If the object file formats use the same leading
+character, this option has no effect.  Otherwise, it will add a
+character, or remove a character, or change a character, as
+appropriate.
+.IP "\fB\-\-remove\-leading\-char\fR" 4
+.IX Item "--remove-leading-char"
+If the first character of a global symbol is a special symbol leading
+character used by the object file format, remove the character.  The
+most common symbol leading character is underscore.  This option will
+remove a leading underscore from all global symbols.  This can be useful
+if you want to link together objects of different file formats with
+different conventions for symbol names.  This is different from
+\&\fB\-\-change\-leading\-char\fR because it always changes the symbol name
+when appropriate, regardless of the object file format of the output
+file.
+.IP "\fB\-\-reverse\-bytes=\fR\fInum\fR" 4
+.IX Item "--reverse-bytes=num"
+Reverse the bytes in a section with output contents.  A section length must
+be evenly divisible by the value given in order for the swap to be able to
+take place. Reversing takes place before the interleaving is performed.
+.Sp
+This option is used typically in generating \s-1ROM\s0 images for problematic
+target systems.  For example, on some target boards, the 32\-bit words
+fetched from 8\-bit ROMs are re-assembled in little-endian byte order
+regardless of the \s-1CPU\s0 byte order.  Depending on the programming model, the
+endianness of the \s-1ROM\s0 may need to be modified.
+.Sp
+Consider a simple file with a section containing the following eight
+bytes:  \f(CW12345678\fR.
+.Sp
+Using \fB\-\-reverse\-bytes=2\fR for the above example, the bytes in the
+output file would be ordered \f(CW21436587\fR.
+.Sp
+Using \fB\-\-reverse\-bytes=4\fR for the above example, the bytes in the
+output file would be ordered \f(CW43218765\fR.
+.Sp
+By using \fB\-\-reverse\-bytes=2\fR for the above example, followed by
+\&\fB\-\-reverse\-bytes=4\fR on the output file, the bytes in the second
+output file would be ordered \f(CW34127856\fR.
+.IP "\fB\-\-srec\-len=\fR\fIival\fR" 4
+.IX Item "--srec-len=ival"
+Meaningful only for srec output.  Set the maximum length of the Srecords
+being produced to \fIival\fR.  This length covers both address, data and
+crc fields.
+.IP "\fB\-\-srec\-forceS3\fR" 4
+.IX Item "--srec-forceS3"
+Meaningful only for srec output.  Avoid generation of S1/S2 records,
+creating S3\-only record format.
+.IP "\fB\-\-redefine\-sym\fR \fIold\fR\fB=\fR\fInew\fR" 4
+.IX Item "--redefine-sym old=new"
+Change the name of a symbol \fIold\fR, to \fInew\fR.  This can be useful
+when one is trying link two things together for which you have no
+source, and there are name collisions.
+.IP "\fB\-\-redefine\-syms=\fR\fIfilename\fR" 4
+.IX Item "--redefine-syms=filename"
+Apply \fB\-\-redefine\-sym\fR to each symbol pair "\fIold\fR \fInew\fR"
+listed in the file \fIfilename\fR.  \fIfilename\fR is simply a flat file,
+with one symbol pair per line.  Line comments may be introduced by the hash
+character.  This option may be given more than once.
+.IP "\fB\-\-weaken\fR" 4
+.IX Item "--weaken"
+Change all global symbols in the file to be weak.  This can be useful
+when building an object which will be linked against other objects using
+the \fB\-R\fR option to the linker.  This option is only effective when
+using an object file format which supports weak symbols.
+.IP "\fB\-\-keep\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--keep-symbols=filename"
+Apply \fB\-\-keep\-symbol\fR option to each symbol listed in the file
+\&\fIfilename\fR.  \fIfilename\fR is simply a flat file, with one symbol
+name per line.  Line comments may be introduced by the hash character.
+This option may be given more than once.
+.IP "\fB\-\-strip\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--strip-symbols=filename"
+Apply \fB\-\-strip\-symbol\fR option to each symbol listed in the file
+\&\fIfilename\fR.  \fIfilename\fR is simply a flat file, with one symbol
+name per line.  Line comments may be introduced by the hash character.
+This option may be given more than once.
+.IP "\fB\-\-strip\-unneeded\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--strip-unneeded-symbols=filename"
+Apply \fB\-\-strip\-unneeded\-symbol\fR option to each symbol listed in
+the file \fIfilename\fR.  \fIfilename\fR is simply a flat file, with one
+symbol name per line.  Line comments may be introduced by the hash
+character.  This option may be given more than once.
+.IP "\fB\-\-keep\-global\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--keep-global-symbols=filename"
+Apply \fB\-\-keep\-global\-symbol\fR option to each symbol listed in the
+file \fIfilename\fR.  \fIfilename\fR is simply a flat file, with one
+symbol name per line.  Line comments may be introduced by the hash
+character.  This option may be given more than once.
+.IP "\fB\-\-localize\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--localize-symbols=filename"
+Apply \fB\-\-localize\-symbol\fR option to each symbol listed in the file
+\&\fIfilename\fR.  \fIfilename\fR is simply a flat file, with one symbol
+name per line.  Line comments may be introduced by the hash character.
+This option may be given more than once.
+.IP "\fB\-\-globalize\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--globalize-symbols=filename"
+Apply \fB\-\-globalize\-symbol\fR option to each symbol listed in the file
+\&\fIfilename\fR.  \fIfilename\fR is simply a flat file, with one symbol
+name per line.  Line comments may be introduced by the hash character.
+This option may be given more than once.
+.IP "\fB\-\-weaken\-symbols=\fR\fIfilename\fR" 4
+.IX Item "--weaken-symbols=filename"
+Apply \fB\-\-weaken\-symbol\fR option to each symbol listed in the file
+\&\fIfilename\fR.  \fIfilename\fR is simply a flat file, with one symbol
+name per line.  Line comments may be introduced by the hash character.
+This option may be given more than once.
+.IP "\fB\-\-alt\-machine\-code=\fR\fIindex\fR" 4
+.IX Item "--alt-machine-code=index"
+If the output architecture has alternate machine codes, use the
+\&\fIindex\fRth code instead of the default one.  This is useful in case
+a machine is assigned an official code and the tool-chain adopts the
+new code, but other applications still depend on the original code
+being used.  For \s-1ELF\s0 based architectures if the \fIindex\fR
+alternative does not exist then the value is treated as an absolute
+number to be stored in the e_machine field of the \s-1ELF\s0 header.
+.IP "\fB\-\-writable\-text\fR" 4
+.IX Item "--writable-text"
+Mark the output text as writable.  This option isn't meaningful for all
+object file formats.
+.IP "\fB\-\-readonly\-text\fR" 4
+.IX Item "--readonly-text"
+Make the output text write protected.  This option isn't meaningful for all
+object file formats.
+.IP "\fB\-\-pure\fR" 4
+.IX Item "--pure"
+Mark the output file as demand paged.  This option isn't meaningful for all
+object file formats.
+.IP "\fB\-\-impure\fR" 4
+.IX Item "--impure"
+Mark the output file as impure.  This option isn't meaningful for all
+object file formats.
+.IP "\fB\-\-prefix\-symbols=\fR\fIstring\fR" 4
+.IX Item "--prefix-symbols=string"
+Prefix all symbols in the output file with \fIstring\fR.
+.IP "\fB\-\-prefix\-sections=\fR\fIstring\fR" 4
+.IX Item "--prefix-sections=string"
+Prefix all section names in the output file with \fIstring\fR.
+.IP "\fB\-\-prefix\-alloc\-sections=\fR\fIstring\fR" 4
+.IX Item "--prefix-alloc-sections=string"
+Prefix all the names of all allocated sections in the output file with
+\&\fIstring\fR.
+.IP "\fB\-\-add\-gnu\-debuglink=\fR\fIpath-to-file\fR" 4
+.IX Item "--add-gnu-debuglink=path-to-file"
+Creates a .gnu_debuglink section which contains a reference to
+\&\fIpath-to-file\fR and adds it to the output file.  Note: the file at
+\&\fIpath-to-file\fR must exist.  Part of the process of adding the
+\&.gnu_debuglink section involves embedding a checksum of the contents
+of the debug info file into the section.
+.Sp
+If the debug info file is built in one location but it is going to be
+installed at a later time into a different location then do not use
+the path to the installed location.  The \fB\-\-add\-gnu\-debuglink\fR
+option will fail because the installed file does not exist yet.
+Instead put the debug info file in the current directory and use the
+\&\fB\-\-add\-gnu\-debuglink\fR option without any directory components,
+like this:
+.Sp
+.Vb 1
+\&         objcopy \-\-add\-gnu\-debuglink=foo.debug
+.Ve
+.Sp
+At debug time the debugger will attempt to look for the separate debug
+info file in a set of known locations.  The exact set of these
+locations varies depending upon the distribution being used, but it
+typically includes:
+.RS 4
+.ie n .IP """* The same directory as the executable.""" 4
+.el .IP "\f(CW* The same directory as the executable.\fR" 4
+.IX Item "* The same directory as the executable."
+.PD 0
+.ie n .IP """* A sub\-directory of the directory containing the executable""" 4
+.el .IP "\f(CW* A sub\-directory of the directory containing the executable\fR" 4
+.IX Item "* A sub-directory of the directory containing the executable"
+.PD
+called .debug
+.ie n .IP """* A global debug directory such as /usr/lib/debug.""" 4
+.el .IP "\f(CW* A global debug directory such as /usr/lib/debug.\fR" 4
+.IX Item "* A global debug directory such as /usr/lib/debug."
+.RE
+.RS 4
+.Sp
+As long as the debug info file has been installed into one of these
+locations before the debugger is run everything should work
+correctly.
+.RE
+.IP "\fB\-\-keep\-file\-symbols\fR" 4
+.IX Item "--keep-file-symbols"
+When stripping a file, perhaps with \fB\-\-strip\-debug\fR or
+\&\fB\-\-strip\-unneeded\fR, retain any symbols specifying source file names,
+which would otherwise get stripped.
+.IP "\fB\-\-only\-keep\-debug\fR" 4
+.IX Item "--only-keep-debug"
+Strip a file, removing contents of any sections that would not be
+stripped by \fB\-\-strip\-debug\fR and leaving the debugging sections
+intact.  In \s-1ELF\s0 files, this preserves all note sections in the output.
+.Sp
+Note \- the section headers of the stripped sections are preserved,
+including their sizes, but the contents of the section are discarded.
+The section headers are preserved so that other tools can match up the
+debuginfo file with the real executable, even if that executable has
+been relocated to a different address space.
+.Sp
+The intention is that this option will be used in conjunction with
+\&\fB\-\-add\-gnu\-debuglink\fR to create a two part executable.  One a
+stripped binary which will occupy less space in \s-1RAM\s0 and in a
+distribution and the second a debugging information file which is only
+needed if debugging abilities are required.  The suggested procedure
+to create these files is as follows:
+.RS 4
+.IP "1.<Link the executable as normal.  Assuming that is is called>" 4
+.IX Item "1.<Link the executable as normal. Assuming that is is called>"
+\&\f(CW\*(C`foo\*(C'\fR then...
+.ie n .IP "1.<Run ""objcopy \-\-only\-keep\-debug foo foo.dbg"" to>" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-only\-keep\-debug foo foo.dbg\fR to>" 4
+.IX Item "1.<Run objcopy --only-keep-debug foo foo.dbg to>"
+create a file containing the debugging info.
+.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"" to create a>" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR to create a>" 4
+.IX Item "1.<Run objcopy --strip-debug foo to create a>"
+stripped executable.
+.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.dbg foo"">" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.dbg foo\fR>" 4
+.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.dbg foo>"
+to add a link to the debugging info into the stripped executable.
+.RE
+.RS 4
+.Sp
+Note\-\-\-the choice of \f(CW\*(C`.dbg\*(C'\fR as an extension for the debug info
+file is arbitrary.  Also the \f(CW\*(C`\-\-only\-keep\-debug\*(C'\fR step is
+optional.  You could instead do this:
+.IP "1.<Link the executable as normal.>" 4
+.IX Item "1.<Link the executable as normal.>"
+.PD 0
+.ie n .IP "1.<Copy ""foo"" to  ""foo.full"">" 4
+.el .IP "1.<Copy \f(CWfoo\fR to  \f(CWfoo.full\fR>" 4
+.IX Item "1.<Copy foo to foo.full>"
+.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"">" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR>" 4
+.IX Item "1.<Run objcopy --strip-debug foo>"
+.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.full foo"">" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.full foo\fR>" 4
+.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.full foo>"
+.RE
+.RS 4
+.PD
+.Sp
+i.e., the file pointed to by the \fB\-\-add\-gnu\-debuglink\fR can be the
+full executable.  It does not have to be a file created by the
+\&\fB\-\-only\-keep\-debug\fR switch.
+.Sp
+Note\-\-\-this switch is only intended for use on fully linked files.  It
+does not make sense to use it on object files where the debugging
+information may be incomplete.  Besides the gnu_debuglink feature
+currently only supports the presence of one filename containing
+debugging information, not multiple filenames on a one-per-object-file
+basis.
+.RE
+.IP "\fB\-\-strip\-dwo\fR" 4
+.IX Item "--strip-dwo"
+Remove the contents of all \s-1DWARF \s0.dwo sections, leaving the
+remaining debugging sections and all symbols intact.
+This option is intended for use by the compiler as part of
+the \fB\-gsplit\-dwarf\fR option, which splits debug information
+between the .o file and a separate .dwo file.  The compiler
+generates all debug information in the same file, then uses
+the \fB\-\-extract\-dwo\fR option to copy the .dwo sections to
+the .dwo file, then the \fB\-\-strip\-dwo\fR option to remove
+those sections from the original .o file.
+.IP "\fB\-\-extract\-dwo\fR" 4
+.IX Item "--extract-dwo"
+Extract the contents of all \s-1DWARF \s0.dwo sections.  See the
+\&\fB\-\-strip\-dwo\fR option for more information.
+.IP "\fB\-\-file\-alignment\fR \fInum\fR" 4
+.IX Item "--file-alignment num"
+Specify the file alignment.  Sections in the file will always begin at
+file offsets which are multiples of this number.  This defaults to
+512.
+[This option is specific to \s-1PE\s0 targets.]
+.IP "\fB\-\-heap\fR \fIreserve\fR" 4
+.IX Item "--heap reserve"
+.PD 0
+.IP "\fB\-\-heap\fR \fIreserve\fR\fB,\fR\fIcommit\fR" 4
+.IX Item "--heap reserve,commit"
+.PD
+Specify the number of bytes of memory to reserve (and optionally commit)
+to be used as heap for this program.
+[This option is specific to \s-1PE\s0 targets.]
+.IP "\fB\-\-image\-base\fR \fIvalue\fR" 4
+.IX Item "--image-base value"
+Use \fIvalue\fR as the base address of your program or dll.  This is
+the lowest memory location that will be used when your program or dll
+is loaded.  To reduce the need to relocate and improve performance of
+your dlls, each should have a unique base address and not overlap any
+other dlls.  The default is 0x400000 for executables, and 0x10000000
+for dlls.
+[This option is specific to \s-1PE\s0 targets.]
+.IP "\fB\-\-section\-alignment\fR \fInum\fR" 4
+.IX Item "--section-alignment num"
+Sets the section alignment.  Sections in memory will always begin at
+addresses which are a multiple of this number.  Defaults to 0x1000.
+[This option is specific to \s-1PE\s0 targets.]
+.IP "\fB\-\-stack\fR \fIreserve\fR" 4
+.IX Item "--stack reserve"
+.PD 0
+.IP "\fB\-\-stack\fR \fIreserve\fR\fB,\fR\fIcommit\fR" 4
+.IX Item "--stack reserve,commit"
+.PD
+Specify the number of bytes of memory to reserve (and optionally commit)
+to be used as stack for this program.
+[This option is specific to \s-1PE\s0 targets.]
+.IP "\fB\-\-subsystem\fR \fIwhich\fR" 4
+.IX Item "--subsystem which"
+.PD 0
+.IP "\fB\-\-subsystem\fR \fIwhich\fR\fB:\fR\fImajor\fR" 4
+.IX Item "--subsystem which:major"
+.IP "\fB\-\-subsystem\fR \fIwhich\fR\fB:\fR\fImajor\fR\fB.\fR\fIminor\fR" 4
+.IX Item "--subsystem which:major.minor"
+.PD
+Specifies the subsystem under which your program will execute.  The
+legal values for \fIwhich\fR are \f(CW\*(C`native\*(C'\fR, \f(CW\*(C`windows\*(C'\fR,
+\&\f(CW\*(C`console\*(C'\fR, \f(CW\*(C`posix\*(C'\fR, \f(CW\*(C`efi\-app\*(C'\fR, \f(CW\*(C`efi\-bsd\*(C'\fR,
+\&\f(CW\*(C`efi\-rtd\*(C'\fR, \f(CW\*(C`sal\-rtd\*(C'\fR, and \f(CW\*(C`xbox\*(C'\fR.  You may optionally set
+the subsystem version also.  Numeric values are also accepted for
+\&\fIwhich\fR.
+[This option is specific to \s-1PE\s0 targets.]
+.IP "\fB\-\-extract\-symbol\fR" 4
+.IX Item "--extract-symbol"
+Keep the file's section flags and symbols but remove all section data.
+Specifically, the option:
+.RS 4
+.IP "*<removes the contents of all sections;>" 4
+.IX Item "*<removes the contents of all sections;>"
+.PD 0
+.IP "*<sets the size of every section to zero; and>" 4
+.IX Item "*<sets the size of every section to zero; and>"
+.IP "*<sets the file's start address to zero.>" 4
+.IX Item "*<sets the file's start address to zero.>"
+.RE
+.RS 4
+.PD
+.Sp
+This option is used to build a \fI.sym\fR file for a VxWorks kernel.
+It can also be a useful way of reducing the size of a \fB\-\-just\-symbols\fR
+linker input file.
+.RE
+.IP "\fB\-\-compress\-debug\-sections\fR" 4
+.IX Item "--compress-debug-sections"
+Compress \s-1DWARF\s0 debug sections using zlib with \s-1SHF_COMPRESSED\s0 from the
+\&\s-1ELF ABI. \s0 Note \- if compression would actually make a section
+\&\fIlarger\fR, then it is not compressed.
+.IP "\fB\-\-compress\-debug\-sections=none\fR" 4
+.IX Item "--compress-debug-sections=none"
+.PD 0
+.IP "\fB\-\-compress\-debug\-sections=zlib\fR" 4
+.IX Item "--compress-debug-sections=zlib"
+.IP "\fB\-\-compress\-debug\-sections=zlib\-gnu\fR" 4
+.IX Item "--compress-debug-sections=zlib-gnu"
+.IP "\fB\-\-compress\-debug\-sections=zlib\-gabi\fR" 4
+.IX Item "--compress-debug-sections=zlib-gabi"
+.PD
+For \s-1ELF\s0 files, these options control how \s-1DWARF\s0 debug sections are
+compressed.  \fB\-\-compress\-debug\-sections=none\fR is equivalent
+to \fB\-\-decompress\-debug\-sections\fR.
+\&\fB\-\-compress\-debug\-sections=zlib\fR and
+\&\fB\-\-compress\-debug\-sections=zlib\-gabi\fR are equivalent to
+\&\fB\-\-compress\-debug\-sections\fR.
+\&\fB\-\-compress\-debug\-sections=zlib\-gnu\fR compresses \s-1DWARF\s0 debug
+sections using zlib.  The debug sections are renamed to begin with
+\&\fB.zdebug\fR instead of \fB.debug\fR.  Note \- if compression would
+actually make a section \fIlarger\fR, then it is not compressed nor
+renamed.
+.IP "\fB\-\-decompress\-debug\-sections\fR" 4
+.IX Item "--decompress-debug-sections"
+Decompress \s-1DWARF\s0 debug sections using zlib.  The original section
+names of the compressed sections are restored.
+.IP "\fB\-\-elf\-stt\-common=yes\fR" 4
+.IX Item "--elf-stt-common=yes"
+.PD 0
+.IP "\fB\-\-elf\-stt\-common=no\fR" 4
+.IX Item "--elf-stt-common=no"
+.PD
+For \s-1ELF\s0 files, these options control whether common symbols should be
+converted to the \f(CW\*(C`STT_COMMON\*(C'\fR or \f(CW\*(C`STT_OBJECT\*(C'\fR type.
+\&\fB\-\-elf\-stt\-common=yes\fR converts common symbol type to
+\&\f(CW\*(C`STT_COMMON\*(C'\fR. \fB\-\-elf\-stt\-common=no\fR converts common symbol
+type to \f(CW\*(C`STT_OBJECT\*(C'\fR.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Show the version number of \fBobjcopy\fR.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-verbose\fR" 4
+.IX Item "--verbose"
+.PD
+Verbose output: list all object files modified.  In the case of
+archives, \fBobjcopy \-V\fR lists all members of the archive.
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Show a summary of the options to \fBobjcopy\fR.
+.IP "\fB\-\-info\fR" 4
+.IX Item "--info"
+Display a list showing all architectures and object formats available.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIld\fR\|(1), \fIobjdump\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-objdump.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-objdump.1
new file mode 100644
index 0000000..c04f40f
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-objdump.1
@@ -0,0 +1,977 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "OBJDUMP 1"
+.TH OBJDUMP 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+objdump \- display information from object files.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+objdump [\fB\-a\fR|\fB\-\-archive\-headers\fR]
+        [\fB\-b\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR]
+        [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR] ]
+        [\fB\-d\fR|\fB\-\-disassemble\fR]
+        [\fB\-D\fR|\fB\-\-disassemble\-all\fR]
+        [\fB\-z\fR|\fB\-\-disassemble\-zeroes\fR]
+        [\fB\-EB\fR|\fB\-EL\fR|\fB\-\-endian=\fR{big | little }]
+        [\fB\-f\fR|\fB\-\-file\-headers\fR]
+        [\fB\-F\fR|\fB\-\-file\-offsets\fR]
+        [\fB\-\-file\-start\-context\fR]
+        [\fB\-g\fR|\fB\-\-debugging\fR]
+        [\fB\-e\fR|\fB\-\-debugging\-tags\fR]
+        [\fB\-h\fR|\fB\-\-section\-headers\fR|\fB\-\-headers\fR]
+        [\fB\-i\fR|\fB\-\-info\fR]
+        [\fB\-j\fR \fIsection\fR|\fB\-\-section=\fR\fIsection\fR]
+        [\fB\-l\fR|\fB\-\-line\-numbers\fR]
+        [\fB\-S\fR|\fB\-\-source\fR]
+        [\fB\-m\fR \fImachine\fR|\fB\-\-architecture=\fR\fImachine\fR]
+        [\fB\-M\fR \fIoptions\fR|\fB\-\-disassembler\-options=\fR\fIoptions\fR]
+        [\fB\-p\fR|\fB\-\-private\-headers\fR]
+        [\fB\-P\fR \fIoptions\fR|\fB\-\-private=\fR\fIoptions\fR]
+        [\fB\-r\fR|\fB\-\-reloc\fR]
+        [\fB\-R\fR|\fB\-\-dynamic\-reloc\fR]
+        [\fB\-s\fR|\fB\-\-full\-contents\fR]
+        [\fB\-W[lLiaprmfFsoRt]\fR|
+         \fB\-\-dwarf\fR[=rawline,=decodedline,=info,=abbrev,=pubnames]
+                 [=aranges,=macro,=frames,=frames\-interp,=str,=loc]
+                 [=Ranges,=pubtypes,=trace_info,=trace_abbrev]
+                 [=trace_aranges,=gdb_index]
+        [\fB\-G\fR|\fB\-\-stabs\fR]
+        [\fB\-t\fR|\fB\-\-syms\fR]
+        [\fB\-T\fR|\fB\-\-dynamic\-syms\fR]
+        [\fB\-x\fR|\fB\-\-all\-headers\fR]
+        [\fB\-w\fR|\fB\-\-wide\fR]
+        [\fB\-\-start\-address=\fR\fIaddress\fR]
+        [\fB\-\-stop\-address=\fR\fIaddress\fR]
+        [\fB\-\-prefix\-addresses\fR]
+        [\fB\-\-[no\-]show\-raw\-insn\fR]
+        [\fB\-\-adjust\-vma=\fR\fIoffset\fR]
+        [\fB\-\-dwarf\-depth=\fR\fIn\fR]
+        [\fB\-\-dwarf\-start=\fR\fIn\fR]
+        [\fB\-\-special\-syms\fR]
+        [\fB\-\-prefix=\fR\fIprefix\fR]
+        [\fB\-\-prefix\-strip=\fR\fIlevel\fR]
+        [\fB\-\-insn\-width=\fR\fIwidth\fR]
+        [\fB\-V\fR|\fB\-\-version\fR]
+        [\fB\-H\fR|\fB\-\-help\fR]
+        \fIobjfile\fR...
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBobjdump\fR displays information about one or more object files.
+The options control what particular information to display.  This
+information is mostly useful to programmers who are working on the
+compilation tools, as opposed to programmers who just want their
+program to compile and work.
+.PP
+\&\fIobjfile\fR... are the object files to be examined.  When you
+specify archives, \fBobjdump\fR shows information on each of the member
+object files.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The long and short forms of options, shown here as alternatives, are
+equivalent.  At least one option from the list
+\&\fB\-a,\-d,\-D,\-e,\-f,\-g,\-G,\-h,\-H,\-p,\-P,\-r,\-R,\-s,\-S,\-t,\-T,\-V,\-x\fR must be given.
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-archive\-header\fR" 4
+.IX Item "--archive-header"
+.PD
+If any of the \fIobjfile\fR files are archives, display the archive
+header information (in a format similar to \fBls \-l\fR).  Besides the
+information you could list with \fBar tv\fR, \fBobjdump \-a\fR shows
+the object file format of each archive member.
+.IP "\fB\-\-adjust\-vma=\fR\fIoffset\fR" 4
+.IX Item "--adjust-vma=offset"
+When dumping information, first add \fIoffset\fR to all the section
+addresses.  This is useful if the section addresses do not correspond to
+the symbol table, which can happen when putting sections at particular
+addresses when using a format which can not represent section addresses,
+such as a.out.
+.IP "\fB\-b\fR \fIbfdname\fR" 4
+.IX Item "-b bfdname"
+.PD 0
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+.PD
+Specify that the object-code format for the object files is
+\&\fIbfdname\fR.  This option may not be necessary; \fIobjdump\fR can
+automatically recognize many formats.
+.Sp
+For example,
+.Sp
+.Vb 1
+\&        objdump \-b oasys \-m vax \-h fu.o
+.Ve
+.Sp
+displays summary information from the section headers (\fB\-h\fR) of
+\&\fIfu.o\fR, which is explicitly identified (\fB\-m\fR) as a \s-1VAX\s0 object
+file in the format produced by Oasys compilers.  You can list the
+formats available with the \fB\-i\fR option.
+.IP "\fB\-C\fR" 4
+.IX Item "-C"
+.PD 0
+.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4
+.IX Item "--demangle[=style]"
+.PD
+Decode (\fIdemangle\fR) low-level symbol names into user-level names.
+Besides removing any initial underscore prepended by the system, this
+makes \*(C+ function names readable.  Different compilers have different
+mangling styles. The optional demangling style argument can be used to
+choose an appropriate demangling style for your compiler.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+.PD 0
+.IP "\fB\-\-debugging\fR" 4
+.IX Item "--debugging"
+.PD
+Display debugging information.  This attempts to parse \s-1STABS\s0 and \s-1IEEE\s0
+debugging format information stored in the file and print it out using
+a C like syntax.  If neither of these formats are found this option
+falls back on the \fB\-W\fR option to print any \s-1DWARF\s0 information in
+the file.
+.IP "\fB\-e\fR" 4
+.IX Item "-e"
+.PD 0
+.IP "\fB\-\-debugging\-tags\fR" 4
+.IX Item "--debugging-tags"
+.PD
+Like \fB\-g\fR, but the information is generated in a format compatible
+with ctags tool.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-\-disassemble\fR" 4
+.IX Item "--disassemble"
+.PD
+Display the assembler mnemonics for the machine instructions from
+\&\fIobjfile\fR.  This option only disassembles those sections which are
+expected to contain instructions.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+.PD 0
+.IP "\fB\-\-disassemble\-all\fR" 4
+.IX Item "--disassemble-all"
+.PD
+Like \fB\-d\fR, but disassemble the contents of all sections, not just
+those expected to contain instructions.
+.Sp
+This option also has a subtle effect on the disassembly of
+instructions in code sections.  When option \fB\-d\fR is in effect
+objdump will assume that any symbols present in a code section occur
+on the boundary between instructions and it will refuse to disassemble
+across such a boundary.  When option \fB\-D\fR is in effect however
+this assumption is supressed.  This means that it is possible for the
+output of \fB\-d\fR and \fB\-D\fR to differ if, for example, data
+is stored in code sections.
+.Sp
+If the target is an \s-1ARM\s0 architecture this switch also has the effect
+of forcing the disassembler to decode pieces of data found in code
+sections as if they were instructions.
+.IP "\fB\-\-prefix\-addresses\fR" 4
+.IX Item "--prefix-addresses"
+When disassembling, print the complete address on each line.  This is
+the older disassembly format.
+.IP "\fB\-EB\fR" 4
+.IX Item "-EB"
+.PD 0
+.IP "\fB\-EL\fR" 4
+.IX Item "-EL"
+.IP "\fB\-\-endian={big|little}\fR" 4
+.IX Item "--endian={big|little}"
+.PD
+Specify the endianness of the object files.  This only affects
+disassembly.  This can be useful when disassembling a file format which
+does not describe endianness information, such as S\-records.
+.IP "\fB\-f\fR" 4
+.IX Item "-f"
+.PD 0
+.IP "\fB\-\-file\-headers\fR" 4
+.IX Item "--file-headers"
+.PD
+Display summary information from the overall header of
+each of the \fIobjfile\fR files.
+.IP "\fB\-F\fR" 4
+.IX Item "-F"
+.PD 0
+.IP "\fB\-\-file\-offsets\fR" 4
+.IX Item "--file-offsets"
+.PD
+When disassembling sections, whenever a symbol is displayed, also
+display the file offset of the region of data that is about to be
+dumped.  If zeroes are being skipped, then when disassembly resumes,
+tell the user how many zeroes were skipped and the file offset of the
+location from where the disassembly resumes.  When dumping sections,
+display the file offset of the location from where the dump starts.
+.IP "\fB\-\-file\-start\-context\fR" 4
+.IX Item "--file-start-context"
+Specify that when displaying interlisted source code/disassembly
+(assumes \fB\-S\fR) from a file that has not yet been displayed, extend the
+context to the start of the file.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-section\-headers\fR" 4
+.IX Item "--section-headers"
+.IP "\fB\-\-headers\fR" 4
+.IX Item "--headers"
+.PD
+Display summary information from the section headers of the
+object file.
+.Sp
+File segments may be relocated to nonstandard addresses, for example by
+using the \fB\-Ttext\fR, \fB\-Tdata\fR, or \fB\-Tbss\fR options to
+\&\fBld\fR.  However, some object file formats, such as a.out, do not
+store the starting address of the file segments.  In those situations,
+although \fBld\fR relocates the sections correctly, using \fBobjdump
+\&\-h\fR to list the file section headers cannot show the correct addresses.
+Instead, it shows the usual addresses, which are implicit for the
+target.
+.Sp
+Note, in some cases it is possible for a section to have both the
+\&\s-1READONLY\s0 and the \s-1NOREAD\s0 attributes set.  In such cases the \s-1NOREAD\s0
+attribute takes precedence, but \fBobjdump\fR will report both
+since the exact setting of the flag bits might be important.
+.IP "\fB\-H\fR" 4
+.IX Item "-H"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Print a summary of the options to \fBobjdump\fR and exit.
+.IP "\fB\-i\fR" 4
+.IX Item "-i"
+.PD 0
+.IP "\fB\-\-info\fR" 4
+.IX Item "--info"
+.PD
+Display a list showing all architectures and object formats available
+for specification with \fB\-b\fR or \fB\-m\fR.
+.IP "\fB\-j\fR \fIname\fR" 4
+.IX Item "-j name"
+.PD 0
+.IP "\fB\-\-section=\fR\fIname\fR" 4
+.IX Item "--section=name"
+.PD
+Display information only for section \fIname\fR.
+.IP "\fB\-l\fR" 4
+.IX Item "-l"
+.PD 0
+.IP "\fB\-\-line\-numbers\fR" 4
+.IX Item "--line-numbers"
+.PD
+Label the display (using debugging information) with the filename and
+source line numbers corresponding to the object code or relocs shown.
+Only useful with \fB\-d\fR, \fB\-D\fR, or \fB\-r\fR.
+.IP "\fB\-m\fR \fImachine\fR" 4
+.IX Item "-m machine"
+.PD 0
+.IP "\fB\-\-architecture=\fR\fImachine\fR" 4
+.IX Item "--architecture=machine"
+.PD
+Specify the architecture to use when disassembling object files.  This
+can be useful when disassembling object files which do not describe
+architecture information, such as S\-records.  You can list the available
+architectures with the \fB\-i\fR option.
+.Sp
+If the target is an \s-1ARM\s0 architecture then this switch has an
+additional effect.  It restricts the disassembly to only those
+instructions supported by the architecture specified by \fImachine\fR.
+If it is necessary to use this switch because the input file does not
+contain any architecture information, but it is also desired to
+disassemble all the instructions use \fB\-marm\fR.
+.IP "\fB\-M\fR \fIoptions\fR" 4
+.IX Item "-M options"
+.PD 0
+.IP "\fB\-\-disassembler\-options=\fR\fIoptions\fR" 4
+.IX Item "--disassembler-options=options"
+.PD
+Pass target specific information to the disassembler.  Only supported on
+some targets.  If it is necessary to specify more than one
+disassembler option then multiple \fB\-M\fR options can be used or
+can be placed together into a comma separated list.
+.Sp
+If the target is an \s-1ARM\s0 architecture then this switch can be used to
+select which register name set is used during disassembler.  Specifying
+\&\fB\-M reg-names-std\fR (the default) will select the register names as
+used in \s-1ARM\s0's instruction set documentation, but with register 13 called
+\&'sp', register 14 called 'lr' and register 15 called 'pc'.  Specifying
+\&\fB\-M reg-names-apcs\fR will select the name set used by the \s-1ARM\s0
+Procedure Call Standard, whilst specifying \fB\-M reg-names-raw\fR will
+just use \fBr\fR followed by the register number.
+.Sp
+There are also two variants on the \s-1APCS\s0 register naming scheme enabled
+by \fB\-M reg-names-atpcs\fR and \fB\-M reg-names-special-atpcs\fR which
+use the ARM/Thumb Procedure Call Standard naming conventions.  (Either
+with the normal register names or the special register names).
+.Sp
+This option can also be used for \s-1ARM\s0 architectures to force the
+disassembler to interpret all instructions as Thumb instructions by
+using the switch \fB\-\-disassembler\-options=force\-thumb\fR.  This can be
+useful when attempting to disassemble thumb code produced by other
+compilers.
+.Sp
+For the x86, some of the options duplicate functions of the \fB\-m\fR
+switch, but allow finer grained control.  Multiple selections from the
+following may be specified as a comma separated string.
+.RS 4
+.ie n .IP """x86\-64""" 4
+.el .IP "\f(CWx86\-64\fR" 4
+.IX Item "x86-64"
+.PD 0
+.ie n .IP """i386""" 4
+.el .IP "\f(CWi386\fR" 4
+.IX Item "i386"
+.ie n .IP """i8086""" 4
+.el .IP "\f(CWi8086\fR" 4
+.IX Item "i8086"
+.PD
+Select disassembly for the given architecture.
+.ie n .IP """intel""" 4
+.el .IP "\f(CWintel\fR" 4
+.IX Item "intel"
+.PD 0
+.ie n .IP """att""" 4
+.el .IP "\f(CWatt\fR" 4
+.IX Item "att"
+.PD
+Select between intel syntax mode and \s-1AT&T\s0 syntax mode.
+.ie n .IP """amd64""" 4
+.el .IP "\f(CWamd64\fR" 4
+.IX Item "amd64"
+.PD 0
+.ie n .IP """intel64""" 4
+.el .IP "\f(CWintel64\fR" 4
+.IX Item "intel64"
+.PD
+Select between \s-1AMD64 ISA\s0 and Intel64 \s-1ISA.\s0
+.ie n .IP """intel\-mnemonic""" 4
+.el .IP "\f(CWintel\-mnemonic\fR" 4
+.IX Item "intel-mnemonic"
+.PD 0
+.ie n .IP """att\-mnemonic""" 4
+.el .IP "\f(CWatt\-mnemonic\fR" 4
+.IX Item "att-mnemonic"
+.PD
+Select between intel mnemonic mode and \s-1AT&T\s0 mnemonic mode.
+Note: \f(CW\*(C`intel\-mnemonic\*(C'\fR implies \f(CW\*(C`intel\*(C'\fR and
+\&\f(CW\*(C`att\-mnemonic\*(C'\fR implies \f(CW\*(C`att\*(C'\fR.
+.ie n .IP """addr64""" 4
+.el .IP "\f(CWaddr64\fR" 4
+.IX Item "addr64"
+.PD 0
+.ie n .IP """addr32""" 4
+.el .IP "\f(CWaddr32\fR" 4
+.IX Item "addr32"
+.ie n .IP """addr16""" 4
+.el .IP "\f(CWaddr16\fR" 4
+.IX Item "addr16"
+.ie n .IP """data32""" 4
+.el .IP "\f(CWdata32\fR" 4
+.IX Item "data32"
+.ie n .IP """data16""" 4
+.el .IP "\f(CWdata16\fR" 4
+.IX Item "data16"
+.PD
+Specify the default address size and operand size.  These four options
+will be overridden if \f(CW\*(C`x86\-64\*(C'\fR, \f(CW\*(C`i386\*(C'\fR or \f(CW\*(C`i8086\*(C'\fR
+appear later in the option string.
+.ie n .IP """suffix""" 4
+.el .IP "\f(CWsuffix\fR" 4
+.IX Item "suffix"
+When in \s-1AT&T\s0 mode, instructs the disassembler to print a mnemonic
+suffix even when the suffix could be inferred by the operands.
+.RE
+.RS 4
+.Sp
+For PowerPC, \fBbooke\fR controls the disassembly of BookE
+instructions.  \fB32\fR and \fB64\fR select PowerPC and
+PowerPC64 disassembly, respectively.  \fBe300\fR selects
+disassembly for the e300 family.  \fB440\fR selects disassembly for
+the PowerPC 440.  \fBppcps\fR selects disassembly for the paired
+single instructions of the \s-1PPC750CL.\s0
+.Sp
+For \s-1MIPS,\s0 this option controls the printing of instruction mnemonic
+names and register names in disassembled instructions.  Multiple
+selections from the following may be specified as a comma separated
+string, and invalid options are ignored:
+.ie n .IP """no\-aliases""" 4
+.el .IP "\f(CWno\-aliases\fR" 4
+.IX Item "no-aliases"
+Print the 'raw' instruction mnemonic instead of some pseudo
+instruction mnemonic.  I.e., print 'daddu' or 'or' instead of 'move',
+\&'sll' instead of 'nop', etc.
+.ie n .IP """msa""" 4
+.el .IP "\f(CWmsa\fR" 4
+.IX Item "msa"
+Disassemble \s-1MSA\s0 instructions.
+.ie n .IP """virt""" 4
+.el .IP "\f(CWvirt\fR" 4
+.IX Item "virt"
+Disassemble the virtualization \s-1ASE\s0 instructions.
+.ie n .IP """xpa""" 4
+.el .IP "\f(CWxpa\fR" 4
+.IX Item "xpa"
+Disassemble the eXtended Physical Address (\s-1XPA\s0) \s-1ASE\s0 instructions.
+.ie n .IP """gpr\-names=\f(CIABI\f(CW""" 4
+.el .IP "\f(CWgpr\-names=\f(CIABI\f(CW\fR" 4
+.IX Item "gpr-names=ABI"
+Print \s-1GPR \s0(general-purpose register) names as appropriate
+for the specified \s-1ABI. \s0 By default, \s-1GPR\s0 names are selected according to
+the \s-1ABI\s0 of the binary being disassembled.
+.ie n .IP """fpr\-names=\f(CIABI\f(CW""" 4
+.el .IP "\f(CWfpr\-names=\f(CIABI\f(CW\fR" 4
+.IX Item "fpr-names=ABI"
+Print \s-1FPR \s0(floating-point register) names as
+appropriate for the specified \s-1ABI. \s0 By default, \s-1FPR\s0 numbers are printed
+rather than names.
+.ie n .IP """cp0\-names=\f(CIARCH\f(CW""" 4
+.el .IP "\f(CWcp0\-names=\f(CIARCH\f(CW\fR" 4
+.IX Item "cp0-names=ARCH"
+Print \s-1CP0 \s0(system control coprocessor; coprocessor 0) register names
+as appropriate for the \s-1CPU\s0 or architecture specified by
+\&\fI\s-1ARCH\s0\fR.  By default, \s-1CP0\s0 register names are selected according to
+the architecture and \s-1CPU\s0 of the binary being disassembled.
+.ie n .IP """hwr\-names=\f(CIARCH\f(CW""" 4
+.el .IP "\f(CWhwr\-names=\f(CIARCH\f(CW\fR" 4
+.IX Item "hwr-names=ARCH"
+Print \s-1HWR \s0(hardware register, used by the \f(CW\*(C`rdhwr\*(C'\fR instruction) names
+as appropriate for the \s-1CPU\s0 or architecture specified by
+\&\fI\s-1ARCH\s0\fR.  By default, \s-1HWR\s0 names are selected according to
+the architecture and \s-1CPU\s0 of the binary being disassembled.
+.ie n .IP """reg\-names=\f(CIABI\f(CW""" 4
+.el .IP "\f(CWreg\-names=\f(CIABI\f(CW\fR" 4
+.IX Item "reg-names=ABI"
+Print \s-1GPR\s0 and \s-1FPR\s0 names as appropriate for the selected \s-1ABI.\s0
+.ie n .IP """reg\-names=\f(CIARCH\f(CW""" 4
+.el .IP "\f(CWreg\-names=\f(CIARCH\f(CW\fR" 4
+.IX Item "reg-names=ARCH"
+Print CPU-specific register names (\s-1CP0\s0 register and \s-1HWR\s0 names)
+as appropriate for the selected \s-1CPU\s0 or architecture.
+.RE
+.RS 4
+.Sp
+For any of the options listed above, \fI\s-1ABI\s0\fR or
+\&\fI\s-1ARCH\s0\fR may be specified as \fBnumeric\fR to have numbers printed
+rather than names, for the selected types of registers.
+You can list the available values of \fI\s-1ABI\s0\fR and \fI\s-1ARCH\s0\fR using
+the \fB\-\-help\fR option.
+.Sp
+For \s-1VAX,\s0 you can specify function entry addresses with \fB\-M
+entry:0xf00ba\fR.  You can use this multiple times to properly
+disassemble \s-1VAX\s0 binary files that don't contain symbol tables (like
+\&\s-1ROM\s0 dumps).  In these cases, the function entry mask would otherwise
+be decoded as \s-1VAX\s0 instructions, which would probably lead the rest
+of the function being wrongly disassembled.
+.RE
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-private\-headers\fR" 4
+.IX Item "--private-headers"
+.PD
+Print information that is specific to the object file format.  The exact
+information printed depends upon the object file format.  For some
+object file formats, no additional information is printed.
+.IP "\fB\-P\fR \fIoptions\fR" 4
+.IX Item "-P options"
+.PD 0
+.IP "\fB\-\-private=\fR\fIoptions\fR" 4
+.IX Item "--private=options"
+.PD
+Print information that is specific to the object file format.  The
+argument \fIoptions\fR is a comma separated list that depends on the
+format (the lists of options is displayed with the help).
+.Sp
+For \s-1XCOFF,\s0 the available options are:
+.RS 4
+.ie n .IP """header""" 4
+.el .IP "\f(CWheader\fR" 4
+.IX Item "header"
+.PD 0
+.ie n .IP """aout""" 4
+.el .IP "\f(CWaout\fR" 4
+.IX Item "aout"
+.ie n .IP """sections""" 4
+.el .IP "\f(CWsections\fR" 4
+.IX Item "sections"
+.ie n .IP """syms""" 4
+.el .IP "\f(CWsyms\fR" 4
+.IX Item "syms"
+.ie n .IP """relocs""" 4
+.el .IP "\f(CWrelocs\fR" 4
+.IX Item "relocs"
+.ie n .IP """lineno,""" 4
+.el .IP "\f(CWlineno,\fR" 4
+.IX Item "lineno,"
+.ie n .IP """loader""" 4
+.el .IP "\f(CWloader\fR" 4
+.IX Item "loader"
+.ie n .IP """except""" 4
+.el .IP "\f(CWexcept\fR" 4
+.IX Item "except"
+.ie n .IP """typchk""" 4
+.el .IP "\f(CWtypchk\fR" 4
+.IX Item "typchk"
+.ie n .IP """traceback""" 4
+.el .IP "\f(CWtraceback\fR" 4
+.IX Item "traceback"
+.ie n .IP """toc""" 4
+.el .IP "\f(CWtoc\fR" 4
+.IX Item "toc"
+.ie n .IP """ldinfo""" 4
+.el .IP "\f(CWldinfo\fR" 4
+.IX Item "ldinfo"
+.RE
+.RS 4
+.PD
+.Sp
+Not all object formats support this option.  In particular the \s-1ELF\s0
+format does not use it.
+.RE
+.IP "\fB\-r\fR" 4
+.IX Item "-r"
+.PD 0
+.IP "\fB\-\-reloc\fR" 4
+.IX Item "--reloc"
+.PD
+Print the relocation entries of the file.  If used with \fB\-d\fR or
+\&\fB\-D\fR, the relocations are printed interspersed with the
+disassembly.
+.IP "\fB\-R\fR" 4
+.IX Item "-R"
+.PD 0
+.IP "\fB\-\-dynamic\-reloc\fR" 4
+.IX Item "--dynamic-reloc"
+.PD
+Print the dynamic relocation entries of the file.  This is only
+meaningful for dynamic objects, such as certain types of shared
+libraries.  As for \fB\-r\fR, if used with \fB\-d\fR or
+\&\fB\-D\fR, the relocations are printed interspersed with the
+disassembly.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-full\-contents\fR" 4
+.IX Item "--full-contents"
+.PD
+Display the full contents of any sections requested.  By default all
+non-empty sections are displayed.
+.IP "\fB\-S\fR" 4
+.IX Item "-S"
+.PD 0
+.IP "\fB\-\-source\fR" 4
+.IX Item "--source"
+.PD
+Display source code intermixed with disassembly, if possible.  Implies
+\&\fB\-d\fR.
+.IP "\fB\-\-prefix=\fR\fIprefix\fR" 4
+.IX Item "--prefix=prefix"
+Specify \fIprefix\fR to add to the absolute paths when used with
+\&\fB\-S\fR.
+.IP "\fB\-\-prefix\-strip=\fR\fIlevel\fR" 4
+.IX Item "--prefix-strip=level"
+Indicate how many initial directory names to strip off the hardwired
+absolute paths. It has no effect without \fB\-\-prefix=\fR\fIprefix\fR.
+.IP "\fB\-\-show\-raw\-insn\fR" 4
+.IX Item "--show-raw-insn"
+When disassembling instructions, print the instruction in hex as well as
+in symbolic form.  This is the default except when
+\&\fB\-\-prefix\-addresses\fR is used.
+.IP "\fB\-\-no\-show\-raw\-insn\fR" 4
+.IX Item "--no-show-raw-insn"
+When disassembling instructions, do not print the instruction bytes.
+This is the default when \fB\-\-prefix\-addresses\fR is used.
+.IP "\fB\-\-insn\-width=\fR\fIwidth\fR" 4
+.IX Item "--insn-width=width"
+Display \fIwidth\fR bytes on a single line when disassembling
+instructions.
+.IP "\fB\-W[lLiaprmfFsoRt]\fR" 4
+.IX Item "-W[lLiaprmfFsoRt]"
+.PD 0
+.IP "\fB\-\-dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames]\fR" 4
+.IX Item "--dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames]"
+.IP "\fB\-\-dwarf[=aranges,=macro,=frames,=frames\-interp,=str,=loc]\fR" 4
+.IX Item "--dwarf[=aranges,=macro,=frames,=frames-interp,=str,=loc]"
+.IP "\fB\-\-dwarf[=Ranges,=pubtypes,=trace_info,=trace_abbrev]\fR" 4
+.IX Item "--dwarf[=Ranges,=pubtypes,=trace_info,=trace_abbrev]"
+.IP "\fB\-\-dwarf[=trace_aranges,=gdb_index]\fR" 4
+.IX Item "--dwarf[=trace_aranges,=gdb_index]"
+.PD
+Displays the contents of the debug sections in the file, if any are
+present.  If one of the optional letters or words follows the switch
+then only data found in those specific sections will be dumped.
+.Sp
+Note that there is no single letter option to display the content of
+trace sections or .gdb_index.
+.Sp
+Note: the output from the \fB=info\fR option can also be affected
+by the options \fB\-\-dwarf\-depth\fR, the \fB\-\-dwarf\-start\fR and
+the \fB\-\-dwarf\-check\fR.
+.IP "\fB\-\-dwarf\-depth=\fR\fIn\fR" 4
+.IX Item "--dwarf-depth=n"
+Limit the dump of the \f(CW\*(C`.debug_info\*(C'\fR section to \fIn\fR children.
+This is only useful with \fB\-\-dwarf=info\fR.  The default is
+to print all DIEs; the special value 0 for \fIn\fR will also have this
+effect.
+.Sp
+With a non-zero value for \fIn\fR, DIEs at or deeper than \fIn\fR
+levels will not be printed.  The range for \fIn\fR is zero-based.
+.IP "\fB\-\-dwarf\-start=\fR\fIn\fR" 4
+.IX Item "--dwarf-start=n"
+Print only DIEs beginning with the \s-1DIE\s0 numbered \fIn\fR.  This is only
+useful with \fB\-\-dwarf=info\fR.
+.Sp
+If specified, this option will suppress printing of any header
+information and all DIEs before the \s-1DIE\s0 numbered \fIn\fR.  Only
+siblings and children of the specified \s-1DIE\s0 will be printed.
+.Sp
+This can be used in conjunction with \fB\-\-dwarf\-depth\fR.
+.IP "\fB\-\-dwarf\-check\fR" 4
+.IX Item "--dwarf-check"
+Enable additional checks for consistency of Dwarf information.
+.IP "\fB\-G\fR" 4
+.IX Item "-G"
+.PD 0
+.IP "\fB\-\-stabs\fR" 4
+.IX Item "--stabs"
+.PD
+Display the full contents of any sections requested.  Display the
+contents of the .stab and .stab.index and .stab.excl sections from an
+\&\s-1ELF\s0 file.  This is only useful on systems (such as Solaris 2.0) in which
+\&\f(CW\*(C`.stab\*(C'\fR debugging symbol-table entries are carried in an \s-1ELF\s0
+section.  In most other file formats, debugging symbol-table entries are
+interleaved with linkage symbols, and are visible in the \fB\-\-syms\fR
+output.
+.IP "\fB\-\-start\-address=\fR\fIaddress\fR" 4
+.IX Item "--start-address=address"
+Start displaying data at the specified address.  This affects the output
+of the \fB\-d\fR, \fB\-r\fR and \fB\-s\fR options.
+.IP "\fB\-\-stop\-address=\fR\fIaddress\fR" 4
+.IX Item "--stop-address=address"
+Stop displaying data at the specified address.  This affects the output
+of the \fB\-d\fR, \fB\-r\fR and \fB\-s\fR options.
+.IP "\fB\-t\fR" 4
+.IX Item "-t"
+.PD 0
+.IP "\fB\-\-syms\fR" 4
+.IX Item "--syms"
+.PD
+Print the symbol table entries of the file.
+This is similar to the information provided by the \fBnm\fR program,
+although the display format is different.  The format of the output
+depends upon the format of the file being dumped, but there are two main
+types.  One looks like this:
+.Sp
+.Vb 2
+\&        [  4](sec  3)(fl 0x00)(ty   0)(scl   3) (nx 1) 0x00000000 .bss
+\&        [  6](sec  1)(fl 0x00)(ty   0)(scl   2) (nx 0) 0x00000000 fred
+.Ve
+.Sp
+where the number inside the square brackets is the number of the entry
+in the symbol table, the \fIsec\fR number is the section number, the
+\&\fIfl\fR value are the symbol's flag bits, the \fIty\fR number is the
+symbol's type, the \fIscl\fR number is the symbol's storage class and
+the \fInx\fR value is the number of auxilary entries associated with
+the symbol.  The last two fields are the symbol's value and its name.
+.Sp
+The other common output format, usually seen with \s-1ELF\s0 based files,
+looks like this:
+.Sp
+.Vb 2
+\&        00000000 l    d  .bss   00000000 .bss
+\&        00000000 g       .text  00000000 fred
+.Ve
+.Sp
+Here the first number is the symbol's value (sometimes refered to as
+its address).  The next field is actually a set of characters and
+spaces indicating the flag bits that are set on the symbol.  These
+characters are described below.  Next is the section with which the
+symbol is associated or \fI*ABS*\fR if the section is absolute (ie
+not connected with any section), or \fI*UND*\fR if the section is
+referenced in the file being dumped, but not defined there.
+.Sp
+After the section name comes another field, a number, which for common
+symbols is the alignment and for other symbol is the size.  Finally
+the symbol's name is displayed.
+.Sp
+The flag characters are divided into 7 groups as follows:
+.RS 4
+.ie n .IP """l""" 4
+.el .IP "\f(CWl\fR" 4
+.IX Item "l"
+.PD 0
+.ie n .IP """g""" 4
+.el .IP "\f(CWg\fR" 4
+.IX Item "g"
+.ie n .IP """u""" 4
+.el .IP "\f(CWu\fR" 4
+.IX Item "u"
+.ie n .IP """!""" 4
+.el .IP "\f(CW!\fR" 4
+.IX Item "!"
+.PD
+The symbol is a local (l), global (g), unique global (u), neither
+global nor local (a space) or both global and local (!).  A
+symbol can be neither local or global for a variety of reasons, e.g.,
+because it is used for debugging, but it is probably an indication of
+a bug if it is ever both local and global.  Unique global symbols are
+a \s-1GNU\s0 extension to the standard set of \s-1ELF\s0 symbol bindings.  For such
+a symbol the dynamic linker will make sure that in the entire process
+there is just one symbol with this name and type in use.
+.ie n .IP """w""" 4
+.el .IP "\f(CWw\fR" 4
+.IX Item "w"
+The symbol is weak (w) or strong (a space).
+.ie n .IP """C""" 4
+.el .IP "\f(CWC\fR" 4
+.IX Item "C"
+The symbol denotes a constructor (C) or an ordinary symbol (a space).
+.ie n .IP """W""" 4
+.el .IP "\f(CWW\fR" 4
+.IX Item "W"
+The symbol is a warning (W) or a normal symbol (a space).  A warning
+symbol's name is a message to be displayed if the symbol following the
+warning symbol is ever referenced.
+.ie n .IP """I""" 4
+.el .IP "\f(CWI\fR" 4
+.IX Item "I"
+.PD 0
+.ie n .IP """i""" 4
+.el .IP "\f(CWi\fR" 4
+.IX Item "i"
+.PD
+The symbol is an indirect reference to another symbol (I), a function
+to be evaluated during reloc processing (i) or a normal symbol (a
+space).
+.ie n .IP """d""" 4
+.el .IP "\f(CWd\fR" 4
+.IX Item "d"
+.PD 0
+.ie n .IP """D""" 4
+.el .IP "\f(CWD\fR" 4
+.IX Item "D"
+.PD
+The symbol is a debugging symbol (d) or a dynamic symbol (D) or a
+normal symbol (a space).
+.ie n .IP """F""" 4
+.el .IP "\f(CWF\fR" 4
+.IX Item "F"
+.PD 0
+.ie n .IP """f""" 4
+.el .IP "\f(CWf\fR" 4
+.IX Item "f"
+.ie n .IP """O""" 4
+.el .IP "\f(CWO\fR" 4
+.IX Item "O"
+.PD
+The symbol is the name of a function (F) or a file (f) or an object
+(O) or just a normal symbol (a space).
+.RE
+.RS 4
+.RE
+.IP "\fB\-T\fR" 4
+.IX Item "-T"
+.PD 0
+.IP "\fB\-\-dynamic\-syms\fR" 4
+.IX Item "--dynamic-syms"
+.PD
+Print the dynamic symbol table entries of the file.  This is only
+meaningful for dynamic objects, such as certain types of shared
+libraries.  This is similar to the information provided by the \fBnm\fR
+program when given the \fB\-D\fR (\fB\-\-dynamic\fR) option.
+.IP "\fB\-\-special\-syms\fR" 4
+.IX Item "--special-syms"
+When displaying symbols include those which the target considers to be
+special in some way and which would not normally be of interest to the
+user.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Print the version number of \fBobjdump\fR and exit.
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+.PD 0
+.IP "\fB\-\-all\-headers\fR" 4
+.IX Item "--all-headers"
+.PD
+Display all available header information, including the symbol table and
+relocation entries.  Using \fB\-x\fR is equivalent to specifying all of
+\&\fB\-a \-f \-h \-p \-r \-t\fR.
+.IP "\fB\-w\fR" 4
+.IX Item "-w"
+.PD 0
+.IP "\fB\-\-wide\fR" 4
+.IX Item "--wide"
+.PD
+Format some lines for output devices that have more than 80 columns.
+Also do not truncate symbol names when they are displayed.
+.IP "\fB\-z\fR" 4
+.IX Item "-z"
+.PD 0
+.IP "\fB\-\-disassemble\-zeroes\fR" 4
+.IX Item "--disassemble-zeroes"
+.PD
+Normally the disassembly output will skip blocks of zeroes.  This
+option directs the disassembler to disassemble those blocks, just like
+any other data.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fInm\fR\|(1), \fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ranlib.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ranlib.1
new file mode 100644
index 0000000..0980c69
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-ranlib.1
@@ -0,0 +1,223 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "RANLIB 1"
+.TH RANLIB 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+ranlib \- generate index to archive.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+ranlib [\fB\-\-plugin\fR \fIname\fR] [\fB\-DhHvVt\fR] \fIarchive\fR
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBranlib\fR generates an index to the contents of an archive and
+stores it in the archive.  The index lists each symbol defined by a
+member of an archive that is a relocatable object file.
+.PP
+You may use \fBnm \-s\fR or \fBnm \-\-print\-armap\fR to list this index.
+.PP
+An archive with such an index speeds up linking to the library and
+allows routines in the library to call each other without regard to
+their placement in the archive.
+.PP
+The \s-1GNU \s0\fBranlib\fR program is another form of \s-1GNU \s0\fBar\fR; running
+\&\fBranlib\fR is completely equivalent to executing \fBar \-s\fR.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-H\fR" 4
+.IX Item "-H"
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Show usage information for \fBranlib\fR.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Show the version number of \fBranlib\fR.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+Operate in \fIdeterministic\fR mode.  The symbol map archive member's
+header will show zero for the \s-1UID, GID,\s0 and timestamp.  When this
+option is used, multiple runs will produce identical output files.
+.Sp
+If \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR, then this mode is on by
+default.  It can be disabled with the \fB\-U\fR option, described
+below.
+.IP "\fB\-t\fR" 4
+.IX Item "-t"
+Update the timestamp of the symbol map of an archive.
+.IP "\fB\-U\fR" 4
+.IX Item "-U"
+Do \fInot\fR operate in \fIdeterministic\fR mode.  This is the
+inverse of the \fB\-D\fR option, above: the archive index will get
+actual \s-1UID, GID,\s0 timestamp, and file mode values.
+.Sp
+If \fIbinutils\fR was configured \fIwithout\fR
+\&\fB\-\-enable\-deterministic\-archives\fR, then this mode is on by
+default.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIar\fR\|(1), \fInm\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-readelf.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-readelf.1
new file mode 100644
index 0000000..22fd253
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-readelf.1
@@ -0,0 +1,463 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "READELF 1"
+.TH READELF 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+readelf \- Displays information about ELF files.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+readelf [\fB\-a\fR|\fB\-\-all\fR]
+        [\fB\-h\fR|\fB\-\-file\-header\fR]
+        [\fB\-l\fR|\fB\-\-program\-headers\fR|\fB\-\-segments\fR]
+        [\fB\-S\fR|\fB\-\-section\-headers\fR|\fB\-\-sections\fR]
+        [\fB\-g\fR|\fB\-\-section\-groups\fR]
+        [\fB\-t\fR|\fB\-\-section\-details\fR]
+        [\fB\-e\fR|\fB\-\-headers\fR]
+        [\fB\-s\fR|\fB\-\-syms\fR|\fB\-\-symbols\fR]
+        [\fB\-\-dyn\-syms\fR]
+        [\fB\-n\fR|\fB\-\-notes\fR]
+        [\fB\-r\fR|\fB\-\-relocs\fR]
+        [\fB\-u\fR|\fB\-\-unwind\fR]
+        [\fB\-d\fR|\fB\-\-dynamic\fR]
+        [\fB\-V\fR|\fB\-\-version\-info\fR]
+        [\fB\-A\fR|\fB\-\-arch\-specific\fR]
+        [\fB\-D\fR|\fB\-\-use\-dynamic\fR]
+        [\fB\-x\fR <number or name>|\fB\-\-hex\-dump=\fR<number or name>]
+        [\fB\-p\fR <number or name>|\fB\-\-string\-dump=\fR<number or name>]
+        [\fB\-R\fR <number or name>|\fB\-\-relocated\-dump=\fR<number or name>]
+        [\fB\-z\fR|\fB\-\-decompress\fR]
+        [\fB\-c\fR|\fB\-\-archive\-index\fR]
+        [\fB\-w[lLiaprmfFsoRt]\fR|
+         \fB\-\-debug\-dump\fR[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index]]
+        [\fB\-\-dwarf\-depth=\fR\fIn\fR]
+        [\fB\-\-dwarf\-start=\fR\fIn\fR]
+        [\fB\-I\fR|\fB\-\-histogram\fR]
+        [\fB\-v\fR|\fB\-\-version\fR]
+        [\fB\-W\fR|\fB\-\-wide\fR]
+        [\fB\-H\fR|\fB\-\-help\fR]
+        \fIelffile\fR...
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBreadelf\fR displays information about one or more \s-1ELF\s0 format object
+files.  The options control what particular information to display.
+.PP
+\&\fIelffile\fR... are the object files to be examined.  32\-bit and
+64\-bit \s-1ELF\s0 files are supported, as are archives containing \s-1ELF\s0 files.
+.PP
+This program performs a similar function to \fBobjdump\fR but it
+goes into more detail and it exists independently of the \s-1BFD\s0
+library, so if there is a bug in \s-1BFD\s0 then readelf will not be
+affected.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The long and short forms of options, shown here as alternatives, are
+equivalent.  At least one option besides \fB\-v\fR or \fB\-H\fR must be
+given.
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-all\fR" 4
+.IX Item "--all"
+.PD
+Equivalent to specifying \fB\-\-file\-header\fR,
+\&\fB\-\-program\-headers\fR, \fB\-\-sections\fR, \fB\-\-symbols\fR,
+\&\fB\-\-relocs\fR, \fB\-\-dynamic\fR, \fB\-\-notes\fR and
+\&\fB\-\-version\-info\fR.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-file\-header\fR" 4
+.IX Item "--file-header"
+.PD
+Displays the information contained in the \s-1ELF\s0 header at the start of the
+file.
+.IP "\fB\-l\fR" 4
+.IX Item "-l"
+.PD 0
+.IP "\fB\-\-program\-headers\fR" 4
+.IX Item "--program-headers"
+.IP "\fB\-\-segments\fR" 4
+.IX Item "--segments"
+.PD
+Displays the information contained in the file's segment headers, if it
+has any.
+.IP "\fB\-S\fR" 4
+.IX Item "-S"
+.PD 0
+.IP "\fB\-\-sections\fR" 4
+.IX Item "--sections"
+.IP "\fB\-\-section\-headers\fR" 4
+.IX Item "--section-headers"
+.PD
+Displays the information contained in the file's section headers, if it
+has any.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+.PD 0
+.IP "\fB\-\-section\-groups\fR" 4
+.IX Item "--section-groups"
+.PD
+Displays the information contained in the file's section groups, if it
+has any.
+.IP "\fB\-t\fR" 4
+.IX Item "-t"
+.PD 0
+.IP "\fB\-\-section\-details\fR" 4
+.IX Item "--section-details"
+.PD
+Displays the detailed section information. Implies \fB\-S\fR.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-symbols\fR" 4
+.IX Item "--symbols"
+.IP "\fB\-\-syms\fR" 4
+.IX Item "--syms"
+.PD
+Displays the entries in symbol table section of the file, if it has one.
+.IP "\fB\-\-dyn\-syms\fR" 4
+.IX Item "--dyn-syms"
+Displays the entries in dynamic symbol table section of the file, if it
+has one.
+.IP "\fB\-e\fR" 4
+.IX Item "-e"
+.PD 0
+.IP "\fB\-\-headers\fR" 4
+.IX Item "--headers"
+.PD
+Display all the headers in the file.  Equivalent to \fB\-h \-l \-S\fR.
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+.PD 0
+.IP "\fB\-\-notes\fR" 4
+.IX Item "--notes"
+.PD
+Displays the contents of the \s-1NOTE\s0 segments and/or sections, if any.
+.IP "\fB\-r\fR" 4
+.IX Item "-r"
+.PD 0
+.IP "\fB\-\-relocs\fR" 4
+.IX Item "--relocs"
+.PD
+Displays the contents of the file's relocation section, if it has one.
+.IP "\fB\-u\fR" 4
+.IX Item "-u"
+.PD 0
+.IP "\fB\-\-unwind\fR" 4
+.IX Item "--unwind"
+.PD
+Displays the contents of the file's unwind section, if it has one.  Only
+the unwind sections for \s-1IA64 ELF\s0 files, as well as \s-1ARM\s0 unwind tables
+(\f(CW\*(C`.ARM.exidx\*(C'\fR / \f(CW\*(C`.ARM.extab\*(C'\fR) are currently supported.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-\-dynamic\fR" 4
+.IX Item "--dynamic"
+.PD
+Displays the contents of the file's dynamic section, if it has one.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\-info\fR" 4
+.IX Item "--version-info"
+.PD
+Displays the contents of the version sections in the file, it they
+exist.
+.IP "\fB\-A\fR" 4
+.IX Item "-A"
+.PD 0
+.IP "\fB\-\-arch\-specific\fR" 4
+.IX Item "--arch-specific"
+.PD
+Displays architecture-specific information in the file, if there
+is any.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+.PD 0
+.IP "\fB\-\-use\-dynamic\fR" 4
+.IX Item "--use-dynamic"
+.PD
+When displaying symbols, this option makes \fBreadelf\fR use the
+symbol hash tables in the file's dynamic section, rather than the
+symbol table sections.
+.IP "\fB\-x <number or name>\fR" 4
+.IX Item "-x <number or name>"
+.PD 0
+.IP "\fB\-\-hex\-dump=<number or name>\fR" 4
+.IX Item "--hex-dump=<number or name>"
+.PD
+Displays the contents of the indicated section as a hexadecimal bytes.
+A number identifies a particular section by index in the section table;
+any other string identifies all sections with that name in the object file.
+.IP "\fB\-R <number or name>\fR" 4
+.IX Item "-R <number or name>"
+.PD 0
+.IP "\fB\-\-relocated\-dump=<number or name>\fR" 4
+.IX Item "--relocated-dump=<number or name>"
+.PD
+Displays the contents of the indicated section as a hexadecimal
+bytes.  A number identifies a particular section by index in the
+section table; any other string identifies all sections with that name
+in the object file.  The contents of the section will be relocated
+before they are displayed.
+.IP "\fB\-p <number or name>\fR" 4
+.IX Item "-p <number or name>"
+.PD 0
+.IP "\fB\-\-string\-dump=<number or name>\fR" 4
+.IX Item "--string-dump=<number or name>"
+.PD
+Displays the contents of the indicated section as printable strings.
+A number identifies a particular section by index in the section table;
+any other string identifies all sections with that name in the object file.
+.IP "\fB\-z\fR" 4
+.IX Item "-z"
+.PD 0
+.IP "\fB\-\-decompress\fR" 4
+.IX Item "--decompress"
+.PD
+Requests that the section(s) being dumped by \fBx\fR, \fBR\fR or
+\&\fBp\fR options are decompressed before being displayed.  If the
+section(s) are not compressed then they are displayed as is.
+.IP "\fB\-c\fR" 4
+.IX Item "-c"
+.PD 0
+.IP "\fB\-\-archive\-index\fR" 4
+.IX Item "--archive-index"
+.PD
+Displays the file symbol index information contained in the header part
+of binary archives.  Performs the same function as the \fBt\fR
+command to \fBar\fR, but without using the \s-1BFD\s0 library.
+.IP "\fB\-w[lLiaprmfFsoRt]\fR" 4
+.IX Item "-w[lLiaprmfFsoRt]"
+.PD 0
+.IP "\fB\-\-debug\-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index]\fR" 4
+.IX Item "--debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index]"
+.PD
+Displays the contents of the debug sections in the file, if any are
+present.  If one of the optional letters or words follows the switch
+then only data found in those specific sections will be dumped.
+.Sp
+Note that there is no single letter option to display the content of
+trace sections or .gdb_index.
+.Sp
+Note: the \fB=decodedline\fR option will display the interpreted
+contents of a .debug_line section whereas the \fB=rawline\fR option
+dumps the contents in a raw format.
+.Sp
+Note: the \fB=frames\-interp\fR option will display the interpreted
+contents of a .debug_frame section whereas the \fB=frames\fR option
+dumps the contents in a raw format.
+.Sp
+Note: the output from the \fB=info\fR option can also be affected
+by the options \fB\-\-dwarf\-depth\fR and \fB\-\-dwarf\-start\fR.
+.IP "\fB\-\-dwarf\-depth=\fR\fIn\fR" 4
+.IX Item "--dwarf-depth=n"
+Limit the dump of the \f(CW\*(C`.debug_info\*(C'\fR section to \fIn\fR children.
+This is only useful with \fB\-\-debug\-dump=info\fR.  The default is
+to print all DIEs; the special value 0 for \fIn\fR will also have this
+effect.
+.Sp
+With a non-zero value for \fIn\fR, DIEs at or deeper than \fIn\fR
+levels will not be printed.  The range for \fIn\fR is zero-based.
+.IP "\fB\-\-dwarf\-start=\fR\fIn\fR" 4
+.IX Item "--dwarf-start=n"
+Print only DIEs beginning with the \s-1DIE\s0 numbered \fIn\fR.  This is only
+useful with \fB\-\-debug\-dump=info\fR.
+.Sp
+If specified, this option will suppress printing of any header
+information and all DIEs before the \s-1DIE\s0 numbered \fIn\fR.  Only
+siblings and children of the specified \s-1DIE\s0 will be printed.
+.Sp
+This can be used in conjunction with \fB\-\-dwarf\-depth\fR.
+.IP "\fB\-I\fR" 4
+.IX Item "-I"
+.PD 0
+.IP "\fB\-\-histogram\fR" 4
+.IX Item "--histogram"
+.PD
+Display a histogram of bucket list lengths when displaying the contents
+of the symbol tables.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Display the version number of readelf.
+.IP "\fB\-W\fR" 4
+.IX Item "-W"
+.PD 0
+.IP "\fB\-\-wide\fR" 4
+.IX Item "--wide"
+.PD
+Don't break output lines to fit into 80 columns. By default
+\&\fBreadelf\fR breaks section header and segment listing lines for
+64\-bit \s-1ELF\s0 files, so that they fit into 80 columns. This option causes
+\&\fBreadelf\fR to print each section header resp. each segment one a
+single line, which is far more readable on terminals wider than 80 columns.
+.IP "\fB\-H\fR" 4
+.IX Item "-H"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Display the command line options understood by \fBreadelf\fR.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIobjdump\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-size.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-size.1
new file mode 100644
index 0000000..65dffc6
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-size.1
@@ -0,0 +1,271 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "SIZE 1"
+.TH SIZE 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+size \- list section sizes and total size.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+size [\fB\-A\fR|\fB\-B\fR|\fB\-\-format=\fR\fIcompatibility\fR]
+     [\fB\-\-help\fR]
+     [\fB\-d\fR|\fB\-o\fR|\fB\-x\fR|\fB\-\-radix=\fR\fInumber\fR]
+     [\fB\-\-common\fR]
+     [\fB\-t\fR|\fB\-\-totals\fR]
+     [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-V\fR|\fB\-\-version\fR]
+     [\fIobjfile\fR...]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+The \s-1GNU \s0\fBsize\fR utility lists the section sizes\-\-\-and the total
+size\-\-\-for each of the object or archive files \fIobjfile\fR in its
+argument list.  By default, one line of output is generated for each
+object file or each module in an archive.
+.PP
+\&\fIobjfile\fR... are the object files to be examined.
+If none are specified, the file \f(CW\*(C`a.out\*(C'\fR will be used.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+The command line options have the following meanings:
+.IP "\fB\-A\fR" 4
+.IX Item "-A"
+.PD 0
+.IP "\fB\-B\fR" 4
+.IX Item "-B"
+.IP "\fB\-\-format=\fR\fIcompatibility\fR" 4
+.IX Item "--format=compatibility"
+.PD
+Using one of these options, you can choose whether the output from \s-1GNU
+\&\s0\fBsize\fR resembles output from System V \fBsize\fR (using \fB\-A\fR,
+or \fB\-\-format=sysv\fR), or Berkeley \fBsize\fR (using \fB\-B\fR, or
+\&\fB\-\-format=berkeley\fR).  The default is the one-line format similar to
+Berkeley's.
+.Sp
+Here is an example of the Berkeley (default) format of output from
+\&\fBsize\fR:
+.Sp
+.Vb 4
+\&        $ size \-\-format=Berkeley ranlib size
+\&        text    data    bss     dec     hex     filename
+\&        294880  81920   11592   388392  5ed28   ranlib
+\&        294880  81920   11888   388688  5ee50   size
+.Ve
+.Sp
+This is the same data, but displayed closer to System V conventions:
+.Sp
+.Vb 7
+\&        $ size \-\-format=SysV ranlib size
+\&        ranlib  :
+\&        section         size         addr
+\&        .text         294880         8192
+\&        .data          81920       303104
+\&        .bss           11592       385024
+\&        Total         388392
+\&        
+\&        
+\&        size  :
+\&        section         size         addr
+\&        .text         294880         8192
+\&        .data          81920       303104
+\&        .bss           11888       385024
+\&        Total         388688
+.Ve
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Show a summary of acceptable arguments and options.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-o\fR" 4
+.IX Item "-o"
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+.IP "\fB\-\-radix=\fR\fInumber\fR" 4
+.IX Item "--radix=number"
+.PD
+Using one of these options, you can control whether the size of each
+section is given in decimal (\fB\-d\fR, or \fB\-\-radix=10\fR); octal
+(\fB\-o\fR, or \fB\-\-radix=8\fR); or hexadecimal (\fB\-x\fR, or
+\&\fB\-\-radix=16\fR).  In \fB\-\-radix=\fR\fInumber\fR, only the three
+values (8, 10, 16) are supported.  The total size is always given in two
+radices; decimal and hexadecimal for \fB\-d\fR or \fB\-x\fR output, or
+octal and hexadecimal if you're using \fB\-o\fR.
+.IP "\fB\-\-common\fR" 4
+.IX Item "--common"
+Print total size of common symbols in each file.  When using Berkeley
+format these are included in the bss size.
+.IP "\fB\-t\fR" 4
+.IX Item "-t"
+.PD 0
+.IP "\fB\-\-totals\fR" 4
+.IX Item "--totals"
+.PD
+Show totals of all objects listed (Berkeley format listing mode only).
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+Specify that the object-code format for \fIobjfile\fR is
+\&\fIbfdname\fR.  This option may not be necessary; \fBsize\fR can
+automatically recognize many formats.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Display the version number of \fBsize\fR.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-strings.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-strings.1
new file mode 100644
index 0000000..b47972b
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-strings.1
@@ -0,0 +1,311 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "STRINGS 1"
+.TH STRINGS 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+strings \- print the strings of printable characters in files.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+strings [\fB\-afovV\fR] [\fB\-\fR\fImin-len\fR]
+        [\fB\-n\fR \fImin-len\fR] [\fB\-\-bytes=\fR\fImin-len\fR]
+        [\fB\-t\fR \fIradix\fR] [\fB\-\-radix=\fR\fIradix\fR]
+        [\fB\-e\fR \fIencoding\fR] [\fB\-\-encoding=\fR\fIencoding\fR]
+        [\fB\-\fR] [\fB\-\-all\fR] [\fB\-\-print\-file\-name\fR]
+        [\fB\-T\fR \fIbfdname\fR] [\fB\-\-target=\fR\fIbfdname\fR]
+        [\fB\-w\fR] [\fB\-\-include\-all\-whitespace\fR]
+        [\fB\-s\fR] [\fB\-\-output\-separator\fR\fIsep_string\fR]
+        [\fB\-\-help\fR] [\fB\-\-version\fR] \fIfile\fR...
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+For each \fIfile\fR given, \s-1GNU \s0\fBstrings\fR prints the
+printable character sequences that are at least 4 characters long (or
+the number given with the options below) and are followed by an
+unprintable character.
+.PP
+Depending upon how the strings program was configured it will default
+to either displaying all the printable sequences that it can find in
+each file, or only those sequences that are in loadable, initialized
+data sections.  If the file type in unrecognizable, or if strings is
+reading from stdin then it will always display all of the printable
+sequences that it can find.
+.PP
+For backwards compatibility any file that occurs after a command line
+option of just \fB\-\fR will also be scanned in full, regardless of
+the presence of any \fB\-d\fR option.
+.PP
+\&\fBstrings\fR is mainly useful for determining the contents of
+non-text files.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-all\fR" 4
+.IX Item "--all"
+.IP "\fB\-\fR" 4
+.IX Item "-"
+.PD
+Scan the whole file, regardless of what sections it contains or
+whether those sections are loaded or initialized.  Normally this is
+the default behaviour, but strings can be configured so that the
+\&\fB\-d\fR is the default instead.
+.Sp
+The \fB\-\fR option is position dependent and forces strings to
+perform full scans of any file that is mentioned after the \fB\-\fR
+on the command line, even if the \fB\-d\fR option has been
+specified.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-\-data\fR" 4
+.IX Item "--data"
+.PD
+Only print strings from initialized, loaded data sections in the
+file.  This may reduce the amount of garbage in the output, but it
+also exposes the strings program to any security flaws that may be
+present in the \s-1BFD\s0 library used to scan and load sections.  Strings
+can be configured so that this option is the default behaviour.  In
+such cases the \fB\-a\fR option can be used to avoid using the \s-1BFD\s0
+library and instead just print all of the strings found in the file.
+.IP "\fB\-f\fR" 4
+.IX Item "-f"
+.PD 0
+.IP "\fB\-\-print\-file\-name\fR" 4
+.IX Item "--print-file-name"
+.PD
+Print the name of the file before each string.
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Print a summary of the program usage on the standard output and exit.
+.IP "\fB\-\fR\fImin-len\fR" 4
+.IX Item "-min-len"
+.PD 0
+.IP "\fB\-n\fR \fImin-len\fR" 4
+.IX Item "-n min-len"
+.IP "\fB\-\-bytes=\fR\fImin-len\fR" 4
+.IX Item "--bytes=min-len"
+.PD
+Print sequences of characters that are at least \fImin-len\fR characters
+long, instead of the default 4.
+.IP "\fB\-o\fR" 4
+.IX Item "-o"
+Like \fB\-t o\fR.  Some other versions of \fBstrings\fR have \fB\-o\fR
+act like \fB\-t d\fR instead.  Since we can not be compatible with both
+ways, we simply chose one.
+.IP "\fB\-t\fR \fIradix\fR" 4
+.IX Item "-t radix"
+.PD 0
+.IP "\fB\-\-radix=\fR\fIradix\fR" 4
+.IX Item "--radix=radix"
+.PD
+Print the offset within the file before each string.  The single
+character argument specifies the radix of the offset\-\-\-\fBo\fR for
+octal, \fBx\fR for hexadecimal, or \fBd\fR for decimal.
+.IP "\fB\-e\fR \fIencoding\fR" 4
+.IX Item "-e encoding"
+.PD 0
+.IP "\fB\-\-encoding=\fR\fIencoding\fR" 4
+.IX Item "--encoding=encoding"
+.PD
+Select the character encoding of the strings that are to be found.
+Possible values for \fIencoding\fR are: \fBs\fR = single\-7\-bit\-byte
+characters (\s-1ASCII, ISO 8859,\s0 etc., default), \fBS\fR =
+single\-8\-bit\-byte characters, \fBb\fR = 16\-bit bigendian, \fBl\fR =
+16\-bit littleendian, \fBB\fR = 32\-bit bigendian, \fBL\fR = 32\-bit
+littleendian.  Useful for finding wide character strings. (\fBl\fR
+and \fBb\fR apply to, for example, Unicode \s-1UTF\-16/UCS\-2\s0 encodings).
+.IP "\fB\-T\fR \fIbfdname\fR" 4
+.IX Item "-T bfdname"
+.PD 0
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+.PD
+Specify an object code format other than your system's default format.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Print the program version number on the standard output and exit.
+.IP "\fB\-w\fR" 4
+.IX Item "-w"
+.PD 0
+.IP "\fB\-\-include\-all\-whitespace\fR" 4
+.IX Item "--include-all-whitespace"
+.PD
+By default tab and space characters are included in the strings that
+are displayed, but other whitespace characters, such a newlines and
+carriage returns, are not.  The \fB\-w\fR option changes this so
+that all whitespace characters are considered to be part of a string.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-output\-separator\fR" 4
+.IX Item "--output-separator"
+.PD
+By default, output strings are delimited by a new-line. This option
+allows you to supply any string to be used as the output record
+separator.  Useful with \-\-include\-all\-whitespace where strings
+may contain new-lines internally.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIar\fR\|(1), \fInm\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), \fIreadelf\fR\|(1)
+and the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-strip.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-strip.1
new file mode 100644
index 0000000..5c616e7
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-strip.1
@@ -0,0 +1,440 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "STRIP 1"
+.TH STRIP 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+strip \- Discard symbols from object files.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+strip [\fB\-F\fR \fIbfdname\fR |\fB\-\-target=\fR\fIbfdname\fR]
+      [\fB\-I\fR \fIbfdname\fR |\fB\-\-input\-target=\fR\fIbfdname\fR]
+      [\fB\-O\fR \fIbfdname\fR |\fB\-\-output\-target=\fR\fIbfdname\fR]
+      [\fB\-s\fR|\fB\-\-strip\-all\fR]
+      [\fB\-S\fR|\fB\-g\fR|\fB\-d\fR|\fB\-\-strip\-debug\fR]
+      [\fB\-\-strip\-dwo\fR]
+      [\fB\-K\fR \fIsymbolname\fR |\fB\-\-keep\-symbol=\fR\fIsymbolname\fR]
+      [\fB\-N\fR \fIsymbolname\fR |\fB\-\-strip\-symbol=\fR\fIsymbolname\fR]
+      [\fB\-w\fR|\fB\-\-wildcard\fR]
+      [\fB\-x\fR|\fB\-\-discard\-all\fR] [\fB\-X\fR |\fB\-\-discard\-locals\fR]
+      [\fB\-R\fR \fIsectionname\fR |\fB\-\-remove\-section=\fR\fIsectionname\fR]
+      [\fB\-o\fR \fIfile\fR] [\fB\-p\fR|\fB\-\-preserve\-dates\fR]
+      [\fB\-D\fR|\fB\-\-enable\-deterministic\-archives\fR]
+      [\fB\-U\fR|\fB\-\-disable\-deterministic\-archives\fR]
+      [\fB\-\-keep\-file\-symbols\fR]
+      [\fB\-\-only\-keep\-debug\fR]
+      [\fB\-v\fR |\fB\-\-verbose\fR] [\fB\-V\fR|\fB\-\-version\fR]
+      [\fB\-\-help\fR] [\fB\-\-info\fR]
+      \fIobjfile\fR...
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\s-1GNU \s0\fBstrip\fR discards all symbols from object files
+\&\fIobjfile\fR.  The list of object files may include archives.
+At least one object file must be given.
+.PP
+\&\fBstrip\fR modifies the files named in its argument,
+rather than writing modified copies under different names.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-F\fR \fIbfdname\fR" 4
+.IX Item "-F bfdname"
+.PD 0
+.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
+.IX Item "--target=bfdname"
+.PD
+Treat the original \fIobjfile\fR as a file with the object
+code format \fIbfdname\fR, and rewrite it in the same format.
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+Show a summary of the options to \fBstrip\fR and exit.
+.IP "\fB\-\-info\fR" 4
+.IX Item "--info"
+Display a list showing all architectures and object formats available.
+.IP "\fB\-I\fR \fIbfdname\fR" 4
+.IX Item "-I bfdname"
+.PD 0
+.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4
+.IX Item "--input-target=bfdname"
+.PD
+Treat the original \fIobjfile\fR as a file with the object
+code format \fIbfdname\fR.
+.IP "\fB\-O\fR \fIbfdname\fR" 4
+.IX Item "-O bfdname"
+.PD 0
+.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4
+.IX Item "--output-target=bfdname"
+.PD
+Replace \fIobjfile\fR with a file in the output format \fIbfdname\fR.
+.IP "\fB\-R\fR \fIsectionname\fR" 4
+.IX Item "-R sectionname"
+.PD 0
+.IP "\fB\-\-remove\-section=\fR\fIsectionname\fR" 4
+.IX Item "--remove-section=sectionname"
+.PD
+Remove any section named \fIsectionname\fR from the output file, in
+addition to whatever sections would otherwise be removed.  This
+option may be given more than once.  Note that using this option
+inappropriately may make the output file unusable.  The wildcard
+character \fB*\fR may be given at the end of \fIsectionname\fR.  If
+so, then any section starting with \fIsectionname\fR will be removed.
+.IP "\fB\-s\fR" 4
+.IX Item "-s"
+.PD 0
+.IP "\fB\-\-strip\-all\fR" 4
+.IX Item "--strip-all"
+.PD
+Remove all symbols.
+.IP "\fB\-g\fR" 4
+.IX Item "-g"
+.PD 0
+.IP "\fB\-S\fR" 4
+.IX Item "-S"
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.IP "\fB\-\-strip\-debug\fR" 4
+.IX Item "--strip-debug"
+.PD
+Remove debugging symbols only.
+.IP "\fB\-\-strip\-dwo\fR" 4
+.IX Item "--strip-dwo"
+Remove the contents of all \s-1DWARF \s0.dwo sections, leaving the
+remaining debugging sections and all symbols intact.
+See the description of this option in the \fBobjcopy\fR section
+for more information.
+.IP "\fB\-\-strip\-unneeded\fR" 4
+.IX Item "--strip-unneeded"
+Remove all symbols that are not needed for relocation processing.
+.IP "\fB\-K\fR \fIsymbolname\fR" 4
+.IX Item "-K symbolname"
+.PD 0
+.IP "\fB\-\-keep\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--keep-symbol=symbolname"
+.PD
+When stripping symbols, keep symbol \fIsymbolname\fR even if it would
+normally be stripped.  This option may be given more than once.
+.IP "\fB\-N\fR \fIsymbolname\fR" 4
+.IX Item "-N symbolname"
+.PD 0
+.IP "\fB\-\-strip\-symbol=\fR\fIsymbolname\fR" 4
+.IX Item "--strip-symbol=symbolname"
+.PD
+Remove symbol \fIsymbolname\fR from the source file. This option may be
+given more than once, and may be combined with strip options other than
+\&\fB\-K\fR.
+.IP "\fB\-o\fR \fIfile\fR" 4
+.IX Item "-o file"
+Put the stripped output in \fIfile\fR, rather than replacing the
+existing file.  When this argument is used, only one \fIobjfile\fR
+argument may be specified.
+.IP "\fB\-p\fR" 4
+.IX Item "-p"
+.PD 0
+.IP "\fB\-\-preserve\-dates\fR" 4
+.IX Item "--preserve-dates"
+.PD
+Preserve the access and modification dates of the file.
+.IP "\fB\-D\fR" 4
+.IX Item "-D"
+.PD 0
+.IP "\fB\-\-enable\-deterministic\-archives\fR" 4
+.IX Item "--enable-deterministic-archives"
+.PD
+Operate in \fIdeterministic\fR mode.  When copying archive members
+and writing the archive index, use zero for UIDs, GIDs, timestamps,
+and use consistent file modes for all files.
+.Sp
+If \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR, then this mode is on by default.
+It can be disabled with the \fB\-U\fR option, below.
+.IP "\fB\-U\fR" 4
+.IX Item "-U"
+.PD 0
+.IP "\fB\-\-disable\-deterministic\-archives\fR" 4
+.IX Item "--disable-deterministic-archives"
+.PD
+Do \fInot\fR operate in \fIdeterministic\fR mode.  This is the
+inverse of the \fB\-D\fR option, above: when copying archive members
+and writing the archive index, use their actual \s-1UID, GID,\s0 timestamp,
+and file mode values.
+.Sp
+This is the default unless \fIbinutils\fR was configured with
+\&\fB\-\-enable\-deterministic\-archives\fR.
+.IP "\fB\-w\fR" 4
+.IX Item "-w"
+.PD 0
+.IP "\fB\-\-wildcard\fR" 4
+.IX Item "--wildcard"
+.PD
+Permit regular expressions in \fIsymbolname\fRs used in other command
+line options.  The question mark (?), asterisk (*), backslash (\e) and
+square brackets ([]) operators can be used anywhere in the symbol
+name.  If the first character of the symbol name is the exclamation
+point (!) then the sense of the switch is reversed for that symbol.
+For example:
+.Sp
+.Vb 1
+\&          \-w \-K !foo \-K fo*
+.Ve
+.Sp
+would cause strip to only keep symbols that start with the letters
+\&\*(L"fo\*(R", but to discard the symbol \*(L"foo\*(R".
+.IP "\fB\-x\fR" 4
+.IX Item "-x"
+.PD 0
+.IP "\fB\-\-discard\-all\fR" 4
+.IX Item "--discard-all"
+.PD
+Remove non-global symbols.
+.IP "\fB\-X\fR" 4
+.IX Item "-X"
+.PD 0
+.IP "\fB\-\-discard\-locals\fR" 4
+.IX Item "--discard-locals"
+.PD
+Remove compiler-generated local symbols.
+(These usually start with \fBL\fR or \fB.\fR.)
+.IP "\fB\-\-keep\-file\-symbols\fR" 4
+.IX Item "--keep-file-symbols"
+When stripping a file, perhaps with \fB\-\-strip\-debug\fR or
+\&\fB\-\-strip\-unneeded\fR, retain any symbols specifying source file names,
+which would otherwise get stripped.
+.IP "\fB\-\-only\-keep\-debug\fR" 4
+.IX Item "--only-keep-debug"
+Strip a file, emptying the contents of any sections that would not be
+stripped by \fB\-\-strip\-debug\fR and leaving the debugging sections
+intact.  In \s-1ELF\s0 files, this preserves all the note sections in the
+output as well.
+.Sp
+Note \- the section headers of the stripped sections are preserved,
+including their sizes, but the contents of the section are discarded.
+The section headers are preserved so that other tools can match up the
+debuginfo file with the real executable, even if that executable has
+been relocated to a different address space.
+.Sp
+The intention is that this option will be used in conjunction with
+\&\fB\-\-add\-gnu\-debuglink\fR to create a two part executable.  One a
+stripped binary which will occupy less space in \s-1RAM\s0 and in a
+distribution and the second a debugging information file which is only
+needed if debugging abilities are required.  The suggested procedure
+to create these files is as follows:
+.RS 4
+.IP "1.<Link the executable as normal.  Assuming that is is called>" 4
+.IX Item "1.<Link the executable as normal. Assuming that is is called>"
+\&\f(CW\*(C`foo\*(C'\fR then...
+.ie n .IP "1.<Run ""objcopy \-\-only\-keep\-debug foo foo.dbg"" to>" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-only\-keep\-debug foo foo.dbg\fR to>" 4
+.IX Item "1.<Run objcopy --only-keep-debug foo foo.dbg to>"
+create a file containing the debugging info.
+.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"" to create a>" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR to create a>" 4
+.IX Item "1.<Run objcopy --strip-debug foo to create a>"
+stripped executable.
+.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.dbg foo"">" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.dbg foo\fR>" 4
+.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.dbg foo>"
+to add a link to the debugging info into the stripped executable.
+.RE
+.RS 4
+.Sp
+Note\-\-\-the choice of \f(CW\*(C`.dbg\*(C'\fR as an extension for the debug info
+file is arbitrary.  Also the \f(CW\*(C`\-\-only\-keep\-debug\*(C'\fR step is
+optional.  You could instead do this:
+.IP "1.<Link the executable as normal.>" 4
+.IX Item "1.<Link the executable as normal.>"
+.PD 0
+.ie n .IP "1.<Copy ""foo"" to ""foo.full"">" 4
+.el .IP "1.<Copy \f(CWfoo\fR to \f(CWfoo.full\fR>" 4
+.IX Item "1.<Copy foo to foo.full>"
+.ie n .IP "1.<Run ""strip \-\-strip\-debug foo"">" 4
+.el .IP "1.<Run \f(CWstrip \-\-strip\-debug foo\fR>" 4
+.IX Item "1.<Run strip --strip-debug foo>"
+.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.full foo"">" 4
+.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.full foo\fR>" 4
+.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.full foo>"
+.RE
+.RS 4
+.PD
+.Sp
+i.e., the file pointed to by the \fB\-\-add\-gnu\-debuglink\fR can be the
+full executable.  It does not have to be a file created by the
+\&\fB\-\-only\-keep\-debug\fR switch.
+.Sp
+Note\-\-\-this switch is only intended for use on fully linked files.  It
+does not make sense to use it on object files where the debugging
+information may be incomplete.  Besides the gnu_debuglink feature
+currently only supports the presence of one filename containing
+debugging information, not multiple filenames on a one-per-object-file
+basis.
+.RE
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Show the version number for \fBstrip\fR.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-verbose\fR" 4
+.IX Item "--verbose"
+.PD
+Verbose output: list all object files modified.  In the case of
+archives, \fBstrip \-v\fR lists all members of the archive.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-windmc.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-windmc.1
new file mode 100644
index 0000000..0e03b92
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-windmc.1
@@ -0,0 +1,356 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "WINDMC 1"
+.TH WINDMC 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+windmc \- generates Windows message resources.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+windmc [options] input-file
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBwindmc\fR reads message definitions from an input file (.mc) and
+translate them into a set of output files.  The output files may be of
+four kinds:
+.ie n .IP """h""" 4
+.el .IP "\f(CWh\fR" 4
+.IX Item "h"
+A C header file containing the message definitions.
+.ie n .IP """rc""" 4
+.el .IP "\f(CWrc\fR" 4
+.IX Item "rc"
+A resource file compilable by the \fBwindres\fR tool.
+.ie n .IP """bin""" 4
+.el .IP "\f(CWbin\fR" 4
+.IX Item "bin"
+One or more binary files containing the resource data for a specific
+message language.
+.ie n .IP """dbg""" 4
+.el .IP "\f(CWdbg\fR" 4
+.IX Item "dbg"
+A C include file that maps message id's to their symbolic name.
+.PP
+The exact description of these different formats is available in
+documentation from Microsoft.
+.PP
+When \fBwindmc\fR converts from the \f(CW\*(C`mc\*(C'\fR format to the \f(CW\*(C`bin\*(C'\fR
+format, \f(CW\*(C`rc\*(C'\fR, \f(CW\*(C`h\*(C'\fR, and optional \f(CW\*(C`dbg\*(C'\fR it is acting like the
+Windows Message Compiler.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-a\fR" 4
+.IX Item "-a"
+.PD 0
+.IP "\fB\-\-ascii_in\fR" 4
+.IX Item "--ascii_in"
+.PD
+Specifies that the input file specified is \s-1ASCII.\s0 This is the default
+behaviour.
+.IP "\fB\-A\fR" 4
+.IX Item "-A"
+.PD 0
+.IP "\fB\-\-ascii_out\fR" 4
+.IX Item "--ascii_out"
+.PD
+Specifies that messages in the output \f(CW\*(C`bin\*(C'\fR files should be in \s-1ASCII\s0
+format.
+.IP "\fB\-b\fR" 4
+.IX Item "-b"
+.PD 0
+.IP "\fB\-\-binprefix\fR" 4
+.IX Item "--binprefix"
+.PD
+Specifies that \f(CW\*(C`bin\*(C'\fR filenames should have to be prefixed by the
+basename of the source file.
+.IP "\fB\-c\fR" 4
+.IX Item "-c"
+.PD 0
+.IP "\fB\-\-customflag\fR" 4
+.IX Item "--customflag"
+.PD
+Sets the customer bit in all message id's.
+.IP "\fB\-C\fR \fIcodepage\fR" 4
+.IX Item "-C codepage"
+.PD 0
+.IP "\fB\-\-codepage_in\fR \fIcodepage\fR" 4
+.IX Item "--codepage_in codepage"
+.PD
+Sets the default codepage to be used to convert input file to \s-1UTF16.\s0 The
+default is ocdepage 1252.
+.IP "\fB\-d\fR" 4
+.IX Item "-d"
+.PD 0
+.IP "\fB\-\-decimal_values\fR" 4
+.IX Item "--decimal_values"
+.PD
+Outputs the constants in the header file in decimal. Default is using
+hexadecimal output.
+.IP "\fB\-e\fR \fIext\fR" 4
+.IX Item "-e ext"
+.PD 0
+.IP "\fB\-\-extension\fR \fIext\fR" 4
+.IX Item "--extension ext"
+.PD
+The extension for the header file. The default is .h extension.
+.IP "\fB\-F\fR \fItarget\fR" 4
+.IX Item "-F target"
+.PD 0
+.IP "\fB\-\-target\fR \fItarget\fR" 4
+.IX Item "--target target"
+.PD
+Specify the \s-1BFD\s0 format to use for a bin file as output.  This
+is a \s-1BFD\s0 target name; you can use the \fB\-\-help\fR option to see a list
+of supported targets.  Normally \fBwindmc\fR will use the default
+format, which is the first one listed by the \fB\-\-help\fR option.
+.IP "\fB\-h\fR \fIpath\fR" 4
+.IX Item "-h path"
+.PD 0
+.IP "\fB\-\-headerdir\fR \fIpath\fR" 4
+.IX Item "--headerdir path"
+.PD
+The target directory of the generated header file. The default is the
+current directory.
+.IP "\fB\-H\fR" 4
+.IX Item "-H"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Displays a list of command line options and then exits.
+.IP "\fB\-m\fR \fIcharacters\fR" 4
+.IX Item "-m characters"
+.PD 0
+.IP "\fB\-\-maxlength\fR \fIcharacters\fR" 4
+.IX Item "--maxlength characters"
+.PD
+Instructs \fBwindmc\fR to generate a warning if the length
+of any message exceeds the number specified.
+.IP "\fB\-n\fR" 4
+.IX Item "-n"
+.PD 0
+.IP "\fB\-\-nullterminate\fR" 4
+.IX Item "--nullterminate"
+.PD
+Terminate message text in \f(CW\*(C`bin\*(C'\fR files by zero. By default they are
+terminated by \s-1CR/LF.\s0
+.IP "\fB\-o\fR" 4
+.IX Item "-o"
+.PD 0
+.IP "\fB\-\-hresult_use\fR" 4
+.IX Item "--hresult_use"
+.PD
+Not yet implemented. Instructs \f(CW\*(C`windmc\*(C'\fR to generate an \s-1OLE2\s0 header
+file, using \s-1HRESULT\s0 definitions. Status codes are used if the flag is not
+specified.
+.IP "\fB\-O\fR \fIcodepage\fR" 4
+.IX Item "-O codepage"
+.PD 0
+.IP "\fB\-\-codepage_out\fR \fIcodepage\fR" 4
+.IX Item "--codepage_out codepage"
+.PD
+Sets the default codepage to be used to output text files. The default
+is ocdepage 1252.
+.IP "\fB\-r\fR \fIpath\fR" 4
+.IX Item "-r path"
+.PD 0
+.IP "\fB\-\-rcdir\fR \fIpath\fR" 4
+.IX Item "--rcdir path"
+.PD
+The target directory for the generated \f(CW\*(C`rc\*(C'\fR script and the generated
+\&\f(CW\*(C`bin\*(C'\fR files that the resource compiler script includes. The default
+is the current directory.
+.IP "\fB\-u\fR" 4
+.IX Item "-u"
+.PD 0
+.IP "\fB\-\-unicode_in\fR" 4
+.IX Item "--unicode_in"
+.PD
+Specifies that the input file is \s-1UTF16.\s0
+.IP "\fB\-U\fR" 4
+.IX Item "-U"
+.PD 0
+.IP "\fB\-\-unicode_out\fR" 4
+.IX Item "--unicode_out"
+.PD
+Specifies that messages in the output \f(CW\*(C`bin\*(C'\fR file should be in \s-1UTF16\s0
+format. This is the default behaviour.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+.PD 0
+.IP "\fB\-\-verbose\fR" 4
+.IX Item "--verbose"
+.PD
+Enable verbose mode.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Prints the version number for \fBwindmc\fR.
+.IP "\fB\-x\fR \fIpath\fR" 4
+.IX Item "-x path"
+.PD 0
+.IP "\fB\-\-xdgb\fR \fIpath\fR" 4
+.IX Item "--xdgb path"
+.PD
+The path of the \f(CW\*(C`dbg\*(C'\fR C include file that maps message id's to the
+symbolic name. No such file is generated without specifying the switch.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
diff --git a/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-windres.1 b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-windres.1
new file mode 100644
index 0000000..bef25a3
--- /dev/null
+++ b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/share/man/man1/arm-linux-androideabi-windres.1
@@ -0,0 +1,364 @@
+.\" Automatically generated by Pod::Man 4.06 (Pod::Simple 3.32)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` ""
+.    ds C' ""
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+.    ds C`
+.    ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
+.\" If the F register is >0, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD.  Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.if !\nF .nr F 0
+.if \nF>0 \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+..
+.    if !\nF==2 \{\
+.        nr % 0
+.        nr F 2
+.    \}
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "WINDRES 1"
+.TH WINDRES 1 "2020-04-01" "binutils-2.27.0" "GNU Development Tools"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+windres \- manipulate Windows resources.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+windres [options] [input\-file] [output\-file]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBwindres\fR reads resources from an input file and copies them into
+an output file.  Either file may be in one of three formats:
+.ie n .IP """rc""" 4
+.el .IP "\f(CWrc\fR" 4
+.IX Item "rc"
+A text format read by the Resource Compiler.
+.ie n .IP """res""" 4
+.el .IP "\f(CWres\fR" 4
+.IX Item "res"
+A binary format generated by the Resource Compiler.
+.ie n .IP """coff""" 4
+.el .IP "\f(CWcoff\fR" 4
+.IX Item "coff"
+A \s-1COFF\s0 object or executable.
+.PP
+The exact description of these different formats is available in
+documentation from Microsoft.
+.PP
+When \fBwindres\fR converts from the \f(CW\*(C`rc\*(C'\fR format to the \f(CW\*(C`res\*(C'\fR
+format, it is acting like the Windows Resource Compiler.  When
+\&\fBwindres\fR converts from the \f(CW\*(C`res\*(C'\fR format to the \f(CW\*(C`coff\*(C'\fR
+format, it is acting like the Windows \f(CW\*(C`CVTRES\*(C'\fR program.
+.PP
+When \fBwindres\fR generates an \f(CW\*(C`rc\*(C'\fR file, the output is similar
+but not identical to the format expected for the input.  When an input
+\&\f(CW\*(C`rc\*(C'\fR file refers to an external filename, an output \f(CW\*(C`rc\*(C'\fR file
+will instead include the file contents.
+.PP
+If the input or output format is not specified, \fBwindres\fR will
+guess based on the file name, or, for the input file, the file contents.
+A file with an extension of \fI.rc\fR will be treated as an \f(CW\*(C`rc\*(C'\fR
+file, a file with an extension of \fI.res\fR will be treated as a
+\&\f(CW\*(C`res\*(C'\fR file, and a file with an extension of \fI.o\fR or
+\&\fI.exe\fR will be treated as a \f(CW\*(C`coff\*(C'\fR file.
+.PP
+If no output file is specified, \fBwindres\fR will print the resources
+in \f(CW\*(C`rc\*(C'\fR format to standard output.
+.PP
+The normal use is for you to write an \f(CW\*(C`rc\*(C'\fR file, use \fBwindres\fR
+to convert it to a \s-1COFF\s0 object file, and then link the \s-1COFF\s0 file into
+your application.  This will make the resources described in the
+\&\f(CW\*(C`rc\*(C'\fR file available to Windows.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.IP "\fB\-i\fR \fIfilename\fR" 4
+.IX Item "-i filename"
+.PD 0
+.IP "\fB\-\-input\fR \fIfilename\fR" 4
+.IX Item "--input filename"
+.PD
+The name of the input file.  If this option is not used, then
+\&\fBwindres\fR will use the first non-option argument as the input file
+name.  If there are no non-option arguments, then \fBwindres\fR will
+read from standard input.  \fBwindres\fR can not read a \s-1COFF\s0 file from
+standard input.
+.IP "\fB\-o\fR \fIfilename\fR" 4
+.IX Item "-o filename"
+.PD 0
+.IP "\fB\-\-output\fR \fIfilename\fR" 4
+.IX Item "--output filename"
+.PD
+The name of the output file.  If this option is not used, then
+\&\fBwindres\fR will use the first non-option argument, after any used
+for the input file name, as the output file name.  If there is no
+non-option argument, then \fBwindres\fR will write to standard output.
+\&\fBwindres\fR can not write a \s-1COFF\s0 file to standard output.  Note,
+for compatibility with \fBrc\fR the option \fB\-fo\fR is also
+accepted, but its use is not recommended.
+.IP "\fB\-J\fR \fIformat\fR" 4
+.IX Item "-J format"
+.PD 0
+.IP "\fB\-\-input\-format\fR \fIformat\fR" 4
+.IX Item "--input-format format"
+.PD
+The input format to read.  \fIformat\fR may be \fBres\fR, \fBrc\fR, or
+\&\fBcoff\fR.  If no input format is specified, \fBwindres\fR will
+guess, as described above.
+.IP "\fB\-O\fR \fIformat\fR" 4
+.IX Item "-O format"
+.PD 0
+.IP "\fB\-\-output\-format\fR \fIformat\fR" 4
+.IX Item "--output-format format"
+.PD
+The output format to generate.  \fIformat\fR may be \fBres\fR,
+\&\fBrc\fR, or \fBcoff\fR.  If no output format is specified,
+\&\fBwindres\fR will guess, as described above.
+.IP "\fB\-F\fR \fItarget\fR" 4
+.IX Item "-F target"
+.PD 0
+.IP "\fB\-\-target\fR \fItarget\fR" 4
+.IX Item "--target target"
+.PD
+Specify the \s-1BFD\s0 format to use for a \s-1COFF\s0 file as input or output.  This
+is a \s-1BFD\s0 target name; you can use the \fB\-\-help\fR option to see a list
+of supported targets.  Normally \fBwindres\fR will use the default
+format, which is the first one listed by the \fB\-\-help\fR option.
+.IP "\fB\-\-preprocessor\fR \fIprogram\fR" 4
+.IX Item "--preprocessor program"
+When \fBwindres\fR reads an \f(CW\*(C`rc\*(C'\fR file, it runs it through the C
+preprocessor first.  This option may be used to specify the preprocessor
+to use, including any leading arguments.  The default preprocessor
+argument is \f(CW\*(C`gcc \-E \-xc\-header \-DRC_INVOKED\*(C'\fR.
+.IP "\fB\-\-preprocessor\-arg\fR \fIoption\fR" 4
+.IX Item "--preprocessor-arg option"
+When \fBwindres\fR reads an \f(CW\*(C`rc\*(C'\fR file, it runs it through
+the C preprocessor first.  This option may be used to specify additional
+text to be passed to preprocessor on its command line.
+This option can be used multiple times to add multiple options to the
+preprocessor command line.
+.IP "\fB\-I\fR \fIdirectory\fR" 4
+.IX Item "-I directory"
+.PD 0
+.IP "\fB\-\-include\-dir\fR \fIdirectory\fR" 4
+.IX Item "--include-dir directory"
+.PD
+Specify an include directory to use when reading an \f(CW\*(C`rc\*(C'\fR file.
+\&\fBwindres\fR will pass this to the preprocessor as an \fB\-I\fR
+option.  \fBwindres\fR will also search this directory when looking for
+files named in the \f(CW\*(C`rc\*(C'\fR file.  If the argument passed to this command
+matches any of the supported \fIformats\fR (as described in the \fB\-J\fR
+option), it will issue a deprecation warning, and behave just like the
+\&\fB\-J\fR option.  New programs should not use this behaviour.  If a
+directory happens to match a \fIformat\fR, simple prefix it with \fB./\fR
+to disable the backward compatibility.
+.IP "\fB\-D\fR \fItarget\fR" 4
+.IX Item "-D target"
+.PD 0
+.IP "\fB\-\-define\fR \fIsym\fR\fB[=\fR\fIval\fR\fB]\fR" 4
+.IX Item "--define sym[=val]"
+.PD
+Specify a \fB\-D\fR option to pass to the preprocessor when reading an
+\&\f(CW\*(C`rc\*(C'\fR file.
+.IP "\fB\-U\fR \fItarget\fR" 4
+.IX Item "-U target"
+.PD 0
+.IP "\fB\-\-undefine\fR \fIsym\fR" 4
+.IX Item "--undefine sym"
+.PD
+Specify a \fB\-U\fR option to pass to the preprocessor when reading an
+\&\f(CW\*(C`rc\*(C'\fR file.
+.IP "\fB\-r\fR" 4
+.IX Item "-r"
+Ignored for compatibility with rc.
+.IP "\fB\-v\fR" 4
+.IX Item "-v"
+Enable verbose mode.  This tells you what the preprocessor is if you
+didn't specify one.
+.IP "\fB\-c\fR \fIval\fR" 4
+.IX Item "-c val"
+.PD 0
+.IP "\fB\-\-codepage\fR \fIval\fR" 4
+.IX Item "--codepage val"
+.PD
+Specify the default codepage to use when reading an \f(CW\*(C`rc\*(C'\fR file.
+\&\fIval\fR should be a hexadecimal prefixed by \fB0x\fR or decimal
+codepage code. The valid range is from zero up to 0xffff, but the
+validity of the codepage is host and configuration dependent.
+.IP "\fB\-l\fR \fIval\fR" 4
+.IX Item "-l val"
+.PD 0
+.IP "\fB\-\-language\fR \fIval\fR" 4
+.IX Item "--language val"
+.PD
+Specify the default language to use when reading an \f(CW\*(C`rc\*(C'\fR file.
+\&\fIval\fR should be a hexadecimal language code.  The low eight bits are
+the language, and the high eight bits are the sublanguage.
+.IP "\fB\-\-use\-temp\-file\fR" 4
+.IX Item "--use-temp-file"
+Use a temporary file to instead of using popen to read the output of
+the preprocessor. Use this option if the popen implementation is buggy
+on the host (eg., certain non-English language versions of Windows 95 and
+Windows 98 are known to have buggy popen where the output will instead
+go the console).
+.IP "\fB\-\-no\-use\-temp\-file\fR" 4
+.IX Item "--no-use-temp-file"
+Use popen, not a temporary file, to read the output of the preprocessor.
+This is the default behaviour.
+.IP "\fB\-h\fR" 4
+.IX Item "-h"
+.PD 0
+.IP "\fB\-\-help\fR" 4
+.IX Item "--help"
+.PD
+Prints a usage summary.
+.IP "\fB\-V\fR" 4
+.IX Item "-V"
+.PD 0
+.IP "\fB\-\-version\fR" 4
+.IX Item "--version"
+.PD
+Prints the version number for \fBwindres\fR.
+.IP "\fB\-\-yydebug\fR" 4
+.IX Item "--yydebug"
+If \fBwindres\fR is compiled with \f(CW\*(C`YYDEBUG\*(C'\fR defined as \f(CW1\fR,
+this will turn on parser debugging.
+.IP "\fB@\fR\fIfile\fR" 4
+.IX Item "@file"
+Read command-line options from \fIfile\fR.  The options read are
+inserted in place of the original @\fIfile\fR option.  If \fIfile\fR
+does not exist, or cannot be read, then the option will be treated
+literally, and not removed.
+.Sp
+Options in \fIfile\fR are separated by whitespace.  A whitespace
+character may be included in an option by surrounding the entire
+option in either single or double quotes.  Any character (including a
+backslash) may be included by prefixing the character to be included
+with a backslash.  The \fIfile\fR may itself contain additional
+@\fIfile\fR options; any such options will be processed recursively.
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+the Info entries for \fIbinutils\fR.
+.SH "COPYRIGHT"
+.IX Header "COPYRIGHT"
+Copyright (c) 1991\-2016 Free Software Foundation, Inc.
+.PP
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts.  A copy of the license is included in the
+section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".