| #! python |
| # Python Serial Port Extension for Win32, Linux, BSD, Jython and .NET/Mono |
| # serial driver for .NET/Mono (IronPython), .NET >= 2 |
| # see __init__.py |
| # |
| # (C) 2008 Chris Liechti <cliechti@gmx.net> |
| # this is distributed under a free software license, see license.txt |
| |
| import clr |
| import System |
| import System.IO.Ports |
| from serial.serialutil import * |
| |
| |
| def device(portnum): |
| """Turn a port number into a device name""" |
| return System.IO.Ports.SerialPort.GetPortNames()[portnum] |
| |
| |
| # must invoke function with byte array, make a helper to convert strings |
| # to byte arrays |
| sab = System.Array[System.Byte] |
| def as_byte_array(string): |
| return sab([ord(x) for x in string]) # XXX will require adaption when run with a 3.x compatible IronPython |
| |
| class IronSerial(SerialBase): |
| """Serial port implementation for .NET/Mono.""" |
| |
| BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, |
| 9600, 19200, 38400, 57600, 115200) |
| |
| def open(self): |
| """Open port with current settings. This may throw a SerialException |
| if the port cannot be opened.""" |
| if self._port is None: |
| raise SerialException("Port must be configured before it can be used.") |
| if self._isOpen: |
| raise SerialException("Port is already open.") |
| try: |
| self._port_handle = System.IO.Ports.SerialPort(self.portstr) |
| except Exception, msg: |
| self._port_handle = None |
| raise SerialException("could not open port %s: %s" % (self.portstr, msg)) |
| |
| self._reconfigurePort() |
| self._port_handle.Open() |
| self._isOpen = True |
| if not self._rtscts: |
| self.setRTS(True) |
| self.setDTR(True) |
| self.flushInput() |
| self.flushOutput() |
| |
| def _reconfigurePort(self): |
| """Set communication parameters on opened port.""" |
| if not self._port_handle: |
| raise SerialException("Can only operate on a valid port handle") |
| |
| #~ self._port_handle.ReceivedBytesThreshold = 1 |
| |
| if self._timeout is None: |
| self._port_handle.ReadTimeout = System.IO.Ports.SerialPort.InfiniteTimeout |
| else: |
| self._port_handle.ReadTimeout = int(self._timeout*1000) |
| |
| # if self._timeout != 0 and self._interCharTimeout is not None: |
| # timeouts = (int(self._interCharTimeout * 1000),) + timeouts[1:] |
| |
| if self._writeTimeout is None: |
| self._port_handle.WriteTimeout = System.IO.Ports.SerialPort.InfiniteTimeout |
| else: |
| self._port_handle.WriteTimeout = int(self._writeTimeout*1000) |
| |
| |
| # Setup the connection info. |
| try: |
| self._port_handle.BaudRate = self._baudrate |
| except IOError, e: |
| # catch errors from illegal baudrate settings |
| raise ValueError(str(e)) |
| |
| if self._bytesize == FIVEBITS: |
| self._port_handle.DataBits = 5 |
| elif self._bytesize == SIXBITS: |
| self._port_handle.DataBits = 6 |
| elif self._bytesize == SEVENBITS: |
| self._port_handle.DataBits = 7 |
| elif self._bytesize == EIGHTBITS: |
| self._port_handle.DataBits = 8 |
| else: |
| raise ValueError("Unsupported number of data bits: %r" % self._bytesize) |
| |
| if self._parity == PARITY_NONE: |
| self._port_handle.Parity = getattr(System.IO.Ports.Parity, 'None') # reserved keyword in Py3k |
| elif self._parity == PARITY_EVEN: |
| self._port_handle.Parity = System.IO.Ports.Parity.Even |
| elif self._parity == PARITY_ODD: |
| self._port_handle.Parity = System.IO.Ports.Parity.Odd |
| elif self._parity == PARITY_MARK: |
| self._port_handle.Parity = System.IO.Ports.Parity.Mark |
| elif self._parity == PARITY_SPACE: |
| self._port_handle.Parity = System.IO.Ports.Parity.Space |
| else: |
| raise ValueError("Unsupported parity mode: %r" % self._parity) |
| |
| if self._stopbits == STOPBITS_ONE: |
| self._port_handle.StopBits = System.IO.Ports.StopBits.One |
| elif self._stopbits == STOPBITS_ONE_POINT_FIVE: |
| self._port_handle.StopBits = System.IO.Ports.StopBits.OnePointFive |
| elif self._stopbits == STOPBITS_TWO: |
| self._port_handle.StopBits = System.IO.Ports.StopBits.Two |
| else: |
| raise ValueError("Unsupported number of stop bits: %r" % self._stopbits) |
| |
| if self._rtscts and self._xonxoff: |
| self._port_handle.Handshake = System.IO.Ports.Handshake.RequestToSendXOnXOff |
| elif self._rtscts: |
| self._port_handle.Handshake = System.IO.Ports.Handshake.RequestToSend |
| elif self._xonxoff: |
| self._port_handle.Handshake = System.IO.Ports.Handshake.XOnXOff |
| else: |
| self._port_handle.Handshake = getattr(System.IO.Ports.Handshake, 'None') # reserved keyword in Py3k |
| |
| #~ def __del__(self): |
| #~ self.close() |
| |
| def close(self): |
| """Close port""" |
| if self._isOpen: |
| if self._port_handle: |
| try: |
| self._port_handle.Close() |
| except System.IO.Ports.InvalidOperationException: |
| # ignore errors. can happen for unplugged USB serial devices |
| pass |
| self._port_handle = None |
| self._isOpen = False |
| |
| def makeDeviceName(self, port): |
| try: |
| return device(port) |
| except TypeError, e: |
| raise SerialException(str(e)) |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - |
| |
| def inWaiting(self): |
| """Return the number of characters currently in the input buffer.""" |
| if not self._port_handle: raise portNotOpenError |
| return self._port_handle.BytesToRead |
| |
| def read(self, size=1): |
| """Read size bytes from the serial port. If a timeout is set it may |
| return less characters as requested. With no timeout it will block |
| until the requested number of bytes is read.""" |
| if not self._port_handle: raise portNotOpenError |
| # must use single byte reads as this is the only way to read |
| # without applying encodings |
| data = bytearray() |
| while size: |
| try: |
| data.append(self._port_handle.ReadByte()) |
| except System.TimeoutException, e: |
| break |
| else: |
| size -= 1 |
| return bytes(data) |
| |
| def write(self, data): |
| """Output the given string over the serial port.""" |
| if not self._port_handle: raise portNotOpenError |
| if not isinstance(data, (bytes, bytearray)): |
| raise TypeError('expected %s or bytearray, got %s' % (bytes, type(data))) |
| try: |
| # must call overloaded method with byte array argument |
| # as this is the only one not applying encodings |
| self._port_handle.Write(as_byte_array(data), 0, len(data)) |
| except System.TimeoutException, e: |
| raise writeTimeoutError |
| return len(data) |
| |
| def flushInput(self): |
| """Clear input buffer, discarding all that is in the buffer.""" |
| if not self._port_handle: raise portNotOpenError |
| self._port_handle.DiscardInBuffer() |
| |
| def flushOutput(self): |
| """Clear output buffer, aborting the current output and |
| discarding all that is in the buffer.""" |
| if not self._port_handle: raise portNotOpenError |
| self._port_handle.DiscardOutBuffer() |
| |
| def sendBreak(self, duration=0.25): |
| """Send break condition. Timed, returns to idle state after given duration.""" |
| if not self._port_handle: raise portNotOpenError |
| import time |
| self._port_handle.BreakState = True |
| time.sleep(duration) |
| self._port_handle.BreakState = False |
| |
| def setBreak(self, level=True): |
| """Set break: Controls TXD. When active, to transmitting is possible.""" |
| if not self._port_handle: raise portNotOpenError |
| self._port_handle.BreakState = bool(level) |
| |
| def setRTS(self, level=True): |
| """Set terminal status line: Request To Send""" |
| if not self._port_handle: raise portNotOpenError |
| self._port_handle.RtsEnable = bool(level) |
| |
| def setDTR(self, level=True): |
| """Set terminal status line: Data Terminal Ready""" |
| if not self._port_handle: raise portNotOpenError |
| self._port_handle.DtrEnable = bool(level) |
| |
| def getCTS(self): |
| """Read terminal status line: Clear To Send""" |
| if not self._port_handle: raise portNotOpenError |
| return self._port_handle.CtsHolding |
| |
| def getDSR(self): |
| """Read terminal status line: Data Set Ready""" |
| if not self._port_handle: raise portNotOpenError |
| return self._port_handle.DsrHolding |
| |
| def getRI(self): |
| """Read terminal status line: Ring Indicator""" |
| if not self._port_handle: raise portNotOpenError |
| #~ return self._port_handle.XXX |
| return False #XXX an error would be better |
| |
| def getCD(self): |
| """Read terminal status line: Carrier Detect""" |
| if not self._port_handle: raise portNotOpenError |
| return self._port_handle.CDHolding |
| |
| # - - platform specific - - - - |
| # none |
| |
| |
| # assemble Serial class with the platform specific implementation and the base |
| # for file-like behavior. for Python 2.6 and newer, that provide the new I/O |
| # library, derive from io.RawIOBase |
| try: |
| import io |
| except ImportError: |
| # classic version with our own file-like emulation |
| class Serial(IronSerial, FileLike): |
| pass |
| else: |
| # io library present |
| class Serial(IronSerial, io.RawIOBase): |
| pass |
| |
| |
| # Nur Testfunktion!! |
| if __name__ == '__main__': |
| import sys |
| |
| s = Serial(0) |
| sys.stdio.write('%s\n' % s) |
| |
| s = Serial() |
| sys.stdio.write('%s\n' % s) |
| |
| |
| s.baudrate = 19200 |
| s.databits = 7 |
| s.close() |
| s.port = 0 |
| s.open() |
| sys.stdio.write('%s\n' % s) |
| |