hwmon: epl2182: update epl driver for LP5.1
adapt epl driver for LP5.1
Change-Id: I27c9a7761ba374dbdb064dd15a83576970823612
Signed-off-by: Andy Luo <yifeiluo@marvell.com>
diff --git a/drivers/hwmon/epl2182.c b/drivers/hwmon/epl2182.c
index a9a437c..db6f3cd 100644
--- a/drivers/hwmon/epl2182.c
+++ b/drivers/hwmon/epl2182.c
@@ -44,8 +44,8 @@
* configuration
*******************************************************************************/
#define PS_INTERRUPT_MODE 1
-#define P_SENSOR_LTHD 120
-#define P_SENSOR_HTHD 170
+#define P_SENSOR_LTHD 800
+#define P_SENSOR_HTHD 970
#define PS_POLLING_RATE 100
#define ALS_POLLING_RATE 1000
@@ -125,8 +125,8 @@
static epl_raw_data gRawData;
static int dual_count;
-static const char ElanPsensorName[] = "proximity";
-static const char ElanALsensorName[] = "light";
+static const char ElanPsensorName[] = "elan_proximity_sensor";
+static const char ElanALsensorName[] = "elan_light_sensor";
static int psensor_mode_suspend;
@@ -347,7 +347,7 @@
LOG_INFO("------------------- ALS raw = %d, lux = %d\n\n",
gRawData.als_ch1_raw, lux);
ls_data_changed = 1;
- input_report_abs(epld->als_input_dev, ABS_MISC, lux);
+ input_report_abs(epld->als_input_dev, ABS_PRESSURE, lux);
input_sync(epld->als_input_dev);
}
@@ -826,7 +826,7 @@
/*----------------------------------------------------------------------------*/
static struct device_attribute dev_attr_light_enable =
-__ATTR(enable, S_IRWXUGO,
+__ATTR(active, S_IRWXUGO,
light_enable_show, light_enable_store);
static struct attribute *light_sysfs_attrs[] = {
@@ -860,9 +860,9 @@
#endif
set_bit(EV_ABS, epld->als_input_dev->evbit);
#if 1
- set_bit(ABS_MISC, epld->als_input_dev->absbit); /* Proximity */
+ set_bit(ABS_PRESSURE, epld->als_input_dev->absbit); /* Proximity */
#endif
- input_set_abs_params(epld->als_input_dev, ABS_MISC, 0, 65535, 0, 0);
+ input_set_abs_params(epld->als_input_dev, ABS_PRESSURE, 0, 65535, 0, 0);
#if 1
input_set_drvdata(epld->als_input_dev, epld->client);
#endif
@@ -924,7 +924,7 @@
/*----------------------------------------------------------------------------*/
static struct device_attribute dev_attr_ps_enable =
-__ATTR(enable, S_IRWXUGO, proximity_enable_show, proximity_enable_store);
+__ATTR(active, S_IRWXUGO, proximity_enable_show, proximity_enable_store);
static struct attribute *proximity_sysfs_attrs[] = {
&dev_attr_ps_enable.attr,
@@ -1146,6 +1146,12 @@
err = -ENOTSUPP;
goto i2c_fail;
}
+
+ if (i2c_smbus_read_byte_data(client, 0x00) < 0) {
+ dev_err(&client->dev, "epl2182 sensor not found\n");
+ goto i2c_fail;
+ }
+
LOG_INFO("chip id REG 0x00 value = %8x\n",
i2c_smbus_read_byte_data(client, 0x00));
LOG_INFO("chip id REG 0x01 value = %8x\n",