commit 8009c594a5b523444a18cfb65211d38a5e459a8a
author Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Sat Apr 19 00:22:00 2014 +0100
committer Jonathan Cameron <jic23@kernel.org> Mon May 05 10:59:52 2014 +0100
tree 702a358c838a77036817df86712f4184b9a67482
parent 1eef062042751822e9f9de418b0f712c6f9b93e8

iio: hid-sensors: Compass 3D: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/magnetometer/hid-sensor-magn-3d.c

diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index 54eea6a..41cf29e 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/hid-sensor-hub.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -60,6 +61,7 @@
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		BIT(IIO_CHAN_INFO_SCALE) |
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
@@ -69,6 +71,7 @@
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		BIT(IIO_CHAN_INFO_SCALE) |
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
@@ -78,6 +81,7 @@
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		BIT(IIO_CHAN_INFO_SCALE) |
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
@@ -108,11 +112,20 @@
 	u32 address;
 	int ret;
 	int ret_type;
+	s32 poll_value;
 
 	*val = 0;
 	*val2 = 0;
 	switch (mask) {
 	case 0:
+		poll_value = hid_sensor_read_poll_value(
+					&magn_state->common_attributes);
+		if (poll_value < 0)
+				return -EINVAL;
+
+		hid_sensor_power_state(&magn_state->common_attributes, true);
+		msleep_interruptible(poll_value * 2);
+
 		report_id =
 			magn_state->magn[chan->scan_index].report_id;
 		address = magn_3d_addresses[chan->scan_index];
@@ -123,8 +136,11 @@
 				report_id);
 		else {
 			*val = 0;
+			hid_sensor_power_state(&magn_state->common_attributes,
+						false);
 			return -EINVAL;
 		}
+		hid_sensor_power_state(&magn_state->common_attributes, false);
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE: