bnx2x: Fix 5461x LED
Fix port identify test on 5461x PHY by driving LEDs through MDIO.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index bce203f..882f48f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -10327,6 +10327,43 @@
return 0;
}
+
+static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy,
+ struct link_params *params, u8 mode)
+{
+ struct bnx2x *bp = params->bp;
+ u16 temp;
+
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_LED_SEL1);
+ bnx2x_cl22_read(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ &temp);
+ temp &= 0xff00;
+
+ DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode);
+ switch (mode) {
+ case LED_MODE_FRONT_PANEL_OFF:
+ case LED_MODE_OFF:
+ temp |= 0x00ee;
+ break;
+ case LED_MODE_OPER:
+ temp |= 0x0001;
+ break;
+ case LED_MODE_ON:
+ temp |= 0x00ff;
+ break;
+ default:
+ break;
+ }
+ bnx2x_cl22_write(bp, phy,
+ MDIO_REG_GPHY_SHADOW,
+ MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+ return;
+}
+
+
static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
@@ -11103,7 +11140,7 @@
.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL,
+ .set_link_led = (set_link_led_t)bnx2x_5461x_set_link_led,
.phy_specific_func = (phy_specific_func_t)NULL
};
/*****************************************************************/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index fc7bd0f..e58073e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -6990,6 +6990,7 @@
#define MDIO_REG_INTR_MASK 0x1b
#define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1)
#define MDIO_REG_GPHY_SHADOW 0x1c
+#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10)
#define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10)
#define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15)
#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10)