sl82c105: remove no longer needed debugging code
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index d698da4..3c2bbf0 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -24,13 +24,6 @@
#define DRV_NAME "sl82c105"
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(arg) printk arg
-#else
-#define DBG(fmt,...)
-#endif
/*
* SL82C105 PCI config register 0x40 bits.
*/
@@ -104,9 +97,6 @@
unsigned long timings = (unsigned long)ide_get_drivedata(drive);
u16 drv_ctrl;
- DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
- drive->name, ide_xfer_verbose(speed)));
-
drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
/*
@@ -196,8 +186,6 @@
struct pci_dev *dev = to_pci_dev(hwif->dev);
int reg = 0x44 + drive->dn * 4;
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
pci_write_config_word(dev, reg,
(unsigned long)ide_get_drivedata(drive) >> 16);
@@ -209,8 +197,6 @@
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- DBG(("sl82c105_dma_clear(drive:%s)\n", drive->name));
-
sl82c105_reset_host(dev);
}
@@ -218,11 +204,7 @@
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
- int ret;
-
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- ret = ide_dma_end(drive);
+ int ret = ide_dma_end(drive);
pci_write_config_word(dev, reg,
(unsigned long)ide_get_drivedata(drive));
@@ -239,8 +221,6 @@
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
- DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
-
pci_read_config_dword(dev, 0x40, &val);
val |= (CTRL_P1F16 | CTRL_P0F16);
pci_write_config_dword(dev, 0x40, val);
@@ -291,8 +271,6 @@
{
u32 val;
- DBG(("init_chipset_sl82c105()\n"));
-
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);