Staging: remove sxg driver
Unfortunatly, the upstream company has abandonded development of this
driver. So it's best to just remove the driver from the tree.
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index e86a671..10d3fcf 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -45,8 +45,6 @@
source "drivers/staging/slicoss/Kconfig"
-source "drivers/staging/sxg/Kconfig"
-
source "drivers/staging/go7007/Kconfig"
source "drivers/staging/usbip/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index fa53616..c30093b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
-obj-$(CONFIG_SXG) += sxg/
obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_USB_IP_COMMON) += usbip/
obj-$(CONFIG_W35UND) += winbond/
diff --git a/drivers/staging/sxg/Kconfig b/drivers/staging/sxg/Kconfig
deleted file mode 100644
index c5cbdaf..0000000
--- a/drivers/staging/sxg/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-config SXG
- tristate "Alacritech SLIC Technology Non-Accelerated 10Gbe support"
- depends on PCI && NETDEV_10000
- depends on X86
- default n
- help
- This driver supports the Alacritech SLIC Technology Non-Accelerated
- 10Gbe network cards.
-
- To compile this driver as a module, choose
- M here: the module will be called sxg_nic.
diff --git a/drivers/staging/sxg/Makefile b/drivers/staging/sxg/Makefile
deleted file mode 100644
index 8e05322..0000000
--- a/drivers/staging/sxg/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_SXG) += sxg_nic.o
-
-sxg_nic-y := sxg.o sxg_ethtool.o
diff --git a/drivers/staging/sxg/README b/drivers/staging/sxg/README
deleted file mode 100644
index e42f344..0000000
--- a/drivers/staging/sxg/README
+++ /dev/null
@@ -1,12 +0,0 @@
-This is the rough cut at a driver for the Alacritech SLIC Technology
-Non-Accelerated 10Gbe network driver.
-
-TODO:
- - remove wrappers
- - checkpatch.pl cleanups
- - new functionality that the card needs
- - remove reliance on x86
-
-Please send patches to:
- Greg Kroah-Hartman <gregkh@suse.de>
-for any cleanups that you do to this driver.
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
deleted file mode 100644
index 395e876..0000000
--- a/drivers/staging/sxg/sxg.c
+++ /dev/null
@@ -1,4543 +0,0 @@
-/**************************************************************************
- *
- * Copyright (C) 2000-2008 Alacritech, Inc. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The views and conclusions contained in the software and documentation
- * are those of the authors and should not be interpreted as representing
- * official policies, either expressed or implied, of Alacritech, Inc.
- *
- * Parts developed by LinSysSoft Sahara team
- *
- **************************************************************************/
-
-/*
- * FILENAME: sxg.c
- *
- * The SXG driver for Alacritech's 10Gbe products.
- *
- * NOTE: This is the standard, non-accelerated version of Alacritech's
- * IS-NIC driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/firmware.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/mii.h>
-#include <linux/ip.h>
-#include <linux/in.h>
-#include <linux/tcp.h>
-#include <linux/ipv6.h>
-
-#define SLIC_GET_STATS_ENABLED 0
-#define LINUX_FREES_ADAPTER_RESOURCES 1
-#define SXG_OFFLOAD_IP_CHECKSUM 0
-#define SXG_POWER_MANAGEMENT_ENABLED 0
-#define VPCI 0
-#define ATK_DEBUG 1
-#define SXG_UCODE_DEBUG 0
-
-
-#include "sxg_os.h"
-#include "sxghw.h"
-#include "sxghif.h"
-#include "sxg.h"
-#include "sxgdbg.h"
-#include "sxgphycode-1.2.h"
-
-static int sxg_allocate_buffer_memory(struct adapter_t *adapter, u32 Size,
- enum sxg_buffer_type BufferType);
-static int sxg_allocate_rcvblock_complete(struct adapter_t *adapter,
- void *RcvBlock,
- dma_addr_t PhysicalAddress,
- u32 Length);
-static void sxg_allocate_sgl_buffer_complete(struct adapter_t *adapter,
- struct sxg_scatter_gather *SxgSgl,
- dma_addr_t PhysicalAddress,
- u32 Length);
-
-static void sxg_mcast_init_crc32(void);
-static int sxg_entry_open(struct net_device *dev);
-static int sxg_second_open(struct net_device * dev);
-static int sxg_entry_halt(struct net_device *dev);
-static int sxg_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int sxg_send_packets(struct sk_buff *skb, struct net_device *dev);
-static int sxg_transmit_packet(struct adapter_t *adapter, struct sk_buff *skb);
-static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
- struct sxg_scatter_gather *SxgSgl);
-
-static void sxg_handle_interrupt(struct adapter_t *adapter, int *work_done,
- int budget);
-static void sxg_interrupt(struct adapter_t *adapter);
-static int sxg_poll(struct napi_struct *napi, int budget);
-static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId);
-static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId,
- int *sxg_napi_continue, int *work_done, int budget);
-static void sxg_complete_slow_send(struct adapter_t *adapter);
-static struct sk_buff *sxg_slow_receive(struct adapter_t *adapter,
- struct sxg_event *Event);
-static void sxg_process_rcv_error(struct adapter_t *adapter, u32 ErrorStatus);
-static bool sxg_mac_filter(struct adapter_t *adapter,
- struct ether_header *EtherHdr, ushort length);
-static struct net_device_stats *sxg_get_stats(struct net_device * dev);
-void sxg_free_resources(struct adapter_t *adapter);
-void sxg_free_rcvblocks(struct adapter_t *adapter);
-void sxg_free_sgl_buffers(struct adapter_t *adapter);
-void sxg_unmap_resources(struct adapter_t *adapter);
-void sxg_free_mcast_addrs(struct adapter_t *adapter);
-void sxg_collect_statistics(struct adapter_t *adapter);
-static int sxg_register_interrupt(struct adapter_t *adapter);
-static void sxg_remove_isr(struct adapter_t *adapter);
-static irqreturn_t sxg_isr(int irq, void *dev_id);
-
-static void sxg_watchdog(unsigned long data);
-static void sxg_update_link_status (struct work_struct *work);
-
-#define XXXTODO 0
-
-#if XXXTODO
-static int sxg_mac_set_address(struct net_device *dev, void *ptr);
-#endif
-static void sxg_mcast_set_list(struct net_device *dev);
-
-static int sxg_adapter_set_hwaddr(struct adapter_t *adapter);
-
-static int sxg_initialize_adapter(struct adapter_t *adapter);
-static void sxg_stock_rcv_buffers(struct adapter_t *adapter);
-static void sxg_complete_descriptor_blocks(struct adapter_t *adapter,
- unsigned char Index);
-int sxg_change_mtu (struct net_device *netdev, int new_mtu);
-static int sxg_initialize_link(struct adapter_t *adapter);
-static int sxg_phy_init(struct adapter_t *adapter);
-static void sxg_link_event(struct adapter_t *adapter);
-static enum SXG_LINK_STATE sxg_get_link_state(struct adapter_t *adapter);
-static void sxg_link_state(struct adapter_t *adapter,
- enum SXG_LINK_STATE LinkState);
-static int sxg_write_mdio_reg(struct adapter_t *adapter,
- u32 DevAddr, u32 RegAddr, u32 Value);
-static int sxg_read_mdio_reg(struct adapter_t *adapter,
- u32 DevAddr, u32 RegAddr, u32 *pValue);
-static void sxg_set_mcast_addr(struct adapter_t *adapter);
-
-static unsigned int sxg_first_init = 1;
-static char *sxg_banner =
- "Alacritech SLIC Technology(tm) Server and Storage \
- 10Gbe Accelerator (Non-Accelerated)\n";
-
-static int sxg_debug = 1;
-static int debug = -1;
-static struct net_device *head_netdevice = NULL;
-
-static struct sxgbase_driver sxg_global = {
- .dynamic_intagg = 1,
-};
-static int intagg_delay = 100;
-static u32 dynamic_intagg = 0;
-
-char sxg_driver_name[] = "sxg_nic";
-#define DRV_AUTHOR "Alacritech, Inc. Engineering"
-#define DRV_DESCRIPTION \
- "Alacritech SLIC Techonology(tm) Non-Accelerated 10Gbe Driver"
-#define DRV_COPYRIGHT \
- "Copyright 2000-2008 Alacritech, Inc. All rights reserved."
-
-MODULE_AUTHOR(DRV_AUTHOR);
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_LICENSE("GPL");
-
-module_param(dynamic_intagg, int, 0);
-MODULE_PARM_DESC(dynamic_intagg, "Dynamic Interrupt Aggregation Setting");
-module_param(intagg_delay, int, 0);
-MODULE_PARM_DESC(intagg_delay, "uSec Interrupt Aggregation Delay");
-
-static struct pci_device_id sxg_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(SXG_VENDOR_ID, SXG_DEVICE_ID)},
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, sxg_pci_tbl);
-
-static inline void sxg_reg32_write(void __iomem *reg, u32 value, bool flush)
-{
- writel(value, reg);
- if (flush)
- mb();
-}
-
-static inline void sxg_reg64_write(struct adapter_t *adapter, void __iomem *reg,
- u64 value, u32 cpu)
-{
- u32 value_high = (u32) (value >> 32);
- u32 value_low = (u32) (value & 0x00000000FFFFFFFF);
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->Bit64RegLock, flags);
- writel(value_high, (void __iomem *)(&adapter->UcodeRegs[cpu].Upper));
- writel(value_low, reg);
- spin_unlock_irqrestore(&adapter->Bit64RegLock, flags);
-}
-
-static void sxg_init_driver(void)
-{
- if (sxg_first_init) {
- DBG_ERROR("sxg: %s sxg_first_init set jiffies[%lx]\n",
- __func__, jiffies);
- sxg_first_init = 0;
- spin_lock_init(&sxg_global.driver_lock);
- }
-}
-
-static void sxg_dbg_macaddrs(struct adapter_t *adapter)
-{
- DBG_ERROR(" (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- adapter->netdev->name, adapter->currmacaddr[0],
- adapter->currmacaddr[1], adapter->currmacaddr[2],
- adapter->currmacaddr[3], adapter->currmacaddr[4],
- adapter->currmacaddr[5]);
- DBG_ERROR(" (%s) mac %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- adapter->netdev->name, adapter->macaddr[0],
- adapter->macaddr[1], adapter->macaddr[2],
- adapter->macaddr[3], adapter->macaddr[4],
- adapter->macaddr[5]);
- return;
-}
-
-/* SXG Globals */
-static struct sxg_driver SxgDriver;
-
-#ifdef ATKDBG
-static struct sxg_trace_buffer LSxgTraceBuffer;
-#endif /* ATKDBG */
-static struct sxg_trace_buffer *SxgTraceBuffer = NULL;
-
-/*
- * MSI Related API's
- */
-int sxg_register_intr(struct adapter_t *adapter);
-int sxg_enable_msi_x(struct adapter_t *adapter);
-int sxg_add_msi_isr(struct adapter_t *adapter);
-void sxg_remove_msix_isr(struct adapter_t *adapter);
-int sxg_set_interrupt_capability(struct adapter_t *adapter);
-
-int sxg_set_interrupt_capability(struct adapter_t *adapter)
-{
- int ret;
-
- ret = sxg_enable_msi_x(adapter);
- if (ret != STATUS_SUCCESS) {
- adapter->msi_enabled = FALSE;
- DBG_ERROR("sxg_set_interrupt_capability MSI-X Disable\n");
- } else {
- adapter->msi_enabled = TRUE;
- DBG_ERROR("sxg_set_interrupt_capability MSI-X Enable\n");
- }
- return ret;
-}
-
-int sxg_register_intr(struct adapter_t *adapter)
-{
- int ret = 0;
-
- if (adapter->msi_enabled) {
- ret = sxg_add_msi_isr(adapter);
- }
- else {
- DBG_ERROR("MSI-X Enable Failed. Using Pin INT\n");
- ret = sxg_register_interrupt(adapter);
- if (ret != STATUS_SUCCESS) {
- DBG_ERROR("sxg_register_interrupt Failed\n");
- }
- }
- return ret;
-}
-
-int sxg_enable_msi_x(struct adapter_t *adapter)
-{
- int ret;
-
- adapter->nr_msix_entries = 1;
- adapter->msi_entries = kmalloc(adapter->nr_msix_entries *
- sizeof(struct msix_entry),GFP_KERNEL);
- if (!adapter->msi_entries) {
- DBG_ERROR("%s:MSI Entries memory allocation Failed\n",__func__);
- return -ENOMEM;
- }
- memset(adapter->msi_entries, 0, adapter->nr_msix_entries *
- sizeof(struct msix_entry));
-
- ret = pci_enable_msix(adapter->pcidev, adapter->msi_entries,
- adapter->nr_msix_entries);
- if (ret) {
- DBG_ERROR("Enabling MSI-X with %d vectors failed\n",
- adapter->nr_msix_entries);
- /*Should try with less vector returned.*/
- kfree(adapter->msi_entries);
- return STATUS_FAILURE; /*MSI-X Enable failed.*/
- }
- return (STATUS_SUCCESS);
-}
-
-int sxg_add_msi_isr(struct adapter_t *adapter)
-{
- int ret,i;
-
- if (!adapter->intrregistered) {
- spin_unlock_irqrestore(&sxg_global.driver_lock,
- sxg_global.flags);
- for (i=0; i<adapter->nr_msix_entries; i++) {
- ret = request_irq (adapter->msi_entries[i].vector,
- sxg_isr,
- IRQF_SHARED,
- adapter->netdev->name,
- adapter->netdev);
- if (ret) {
- spin_lock_irqsave(&sxg_global.driver_lock,
- sxg_global.flags);
- DBG_ERROR("sxg: MSI-X request_irq (%s) "
- "FAILED [%x]\n", adapter->netdev->name,
- ret);
- return (ret);
- }
- }
- }
- spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
- adapter->msi_enabled = TRUE;
- adapter->intrregistered = 1;
- adapter->IntRegistered = TRUE;
- return (STATUS_SUCCESS);
-}
-
-void sxg_remove_msix_isr(struct adapter_t *adapter)
-{
- int i,vector;
- struct net_device *netdev = adapter->netdev;
-
- for(i=0; i< adapter->nr_msix_entries;i++)
- {
- vector = adapter->msi_entries[i].vector;
- DBG_ERROR("%s : Freeing IRQ vector#%d\n",__func__,vector);
- free_irq(vector,netdev);
- }
-}
-
-
-static void sxg_remove_isr(struct adapter_t *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- if (adapter->msi_enabled)
- sxg_remove_msix_isr(adapter);
- else
- free_irq(adapter->netdev->irq, netdev);
-}
-
-void sxg_reset_interrupt_capability(struct adapter_t *adapter)
-{
- if (adapter->msi_enabled) {
- pci_disable_msix(adapter->pcidev);
- kfree(adapter->msi_entries);
- adapter->msi_entries = NULL;
- }
- return;
-}
-
-/*
- * sxg_download_microcode
- *
- * Download Microcode to Sahara adapter using the Linux
- * Firmware module to get the ucode.sys file.
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * UcodeSel - microcode file selection
- *
- * Return
- * int
- */
-static bool sxg_download_microcode(struct adapter_t *adapter,
- enum SXG_UCODE_SEL UcodeSel)
-{
- const struct firmware *fw;
- const char *file = "";
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- int ret;
- int ucode_start;
- u32 Section;
- u32 ThisSectionSize;
- u32 instruction = 0;
- u32 BaseAddress, AddressOffset, Address;
- /* u32 Failure; */
- u32 ValueRead;
- u32 i;
- u32 index = 0;
- u32 num_sections = 0;
- u32 sectionSize[16];
- u32 sectionStart[16];
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DnldUcod",
- adapter, 0, 0, 0);
-
- /*
- * This routine is only implemented to download the microcode
- * for the Revision B Sahara chip. Rev A and Diagnostic
- * microcode is not supported at this time. If Rev A or
- * diagnostic ucode is required, this routine will obviously
- * need to change. Also, eventually need to add support for
- * Rev B checked version of ucode. That's easy enough once
- * the free version of Rev B works.
- */
- ASSERT(UcodeSel == SXG_UCODE_SYSTEM);
- ASSERT(adapter->asictype == SAHARA_REV_B);
-#if SXG_UCODE_DEBUG
- file = "sxg/saharadbgdownloadB.sys";
-#else
- file = "sxg/saharadownloadB.sys";
-#endif
- ret = request_firmware(&fw, file, &adapter->pcidev->dev);
- if (ret) {
- DBG_ERROR("%s SXG_NIC: Failed to load firmware %s\n", __func__,file);
- return ret;
- }
-
- /*
- * The microcode .sys file contains starts with a 4 byte word containing
- * the number of sections. That is followed by "num_sections" 4 byte
- * words containing each "section" size. That is followed num_sections
- * 4 byte words containing each section "start" address.
- *
- * Following the above header, the .sys file contains num_sections,
- * where each section size is specified, newline delineatetd 12 byte
- * microcode instructions.
- */
- num_sections = *(u32 *)(fw->data + index);
- index += 4;
- ASSERT(num_sections <= 3);
- for (i = 0; i < num_sections; i++) {
- sectionSize[i] = *(u32 *)(fw->data + index);
- index += 4;
- }
- for (i = 0; i < num_sections; i++) {
- sectionStart[i] = *(u32 *)(fw->data + index);
- index += 4;
- }
-
- /* First, reset the card */
- WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH);
- udelay(50);
- HwRegs = adapter->HwRegs;
-
- /*
- * Download each section of the microcode as specified in
- * sectionSize[index] to sectionStart[index] address. As
- * described above, the .sys file contains 12 byte word
- * microcode instructions. The *download.sys file is generated
- * using the objtosys.exe utility that was built for Sahara
- * microcode.
- */
- /* See usage of this below when we read back for parity */
- ucode_start = index;
- instruction = *(u32 *)(fw->data + index);
- index += 4;
-
- for (Section = 0; Section < num_sections; Section++) {
- BaseAddress = sectionStart[Section];
- /* Size in instructions */
- ThisSectionSize = sectionSize[Section] / 12;
- for (AddressOffset = 0; AddressOffset < ThisSectionSize;
- AddressOffset++) {
- u32 first_instr = 0; /* See comment below */
-
- Address = BaseAddress + AddressOffset;
- ASSERT((Address & ~MICROCODE_ADDRESS_MASK) == 0);
- /* Write instruction bits 31 - 0 (low) */
- first_instr = instruction;
- WRITE_REG(HwRegs->UcodeDataLow, instruction, FLUSH);
- instruction = *(u32 *)(fw->data + index);
- index += 4; /* Advance to the "next" instruction */
-
- /* Write instruction bits 63-32 (middle) */
- WRITE_REG(HwRegs->UcodeDataMiddle, instruction, FLUSH);
- instruction = *(u32 *)(fw->data + index);
- index += 4; /* Advance to the "next" instruction */
-
- /* Write instruction bits 95-64 (high) */
- WRITE_REG(HwRegs->UcodeDataHigh, instruction, FLUSH);
- instruction = *(u32 *)(fw->data + index);
- index += 4; /* Advance to the "next" instruction */
-
- /* Write instruction address with the WRITE bit set */
- WRITE_REG(HwRegs->UcodeAddr,
- (Address | MICROCODE_ADDRESS_WRITE), FLUSH);
- /*
- * Sahara bug in the ucode download logic - the write to DataLow
- * for the next instruction could get corrupted. To avoid this,
- * write to DataLow again for this instruction (which may get
- * corrupted, but it doesn't matter), then increment the address
- * and write the data for the next instruction to DataLow. That
- * write should succeed.
- */
- WRITE_REG(HwRegs->UcodeDataLow, first_instr, FLUSH);
- }
- }
- /*
- * Now repeat the entire operation reading the instruction back and
- * checking for parity errors
- */
- index = ucode_start;
-
- for (Section = 0; Section < num_sections; Section++) {
- BaseAddress = sectionStart[Section];
- /* Size in instructions */
- ThisSectionSize = sectionSize[Section] / 12;
- for (AddressOffset = 0; AddressOffset < ThisSectionSize;
- AddressOffset++) {
- Address = BaseAddress + AddressOffset;
- /* Write the address with the READ bit set */
- WRITE_REG(HwRegs->UcodeAddr,
- (Address | MICROCODE_ADDRESS_READ), FLUSH);
- /* Read it back and check parity bit. */
- READ_REG(HwRegs->UcodeAddr, ValueRead);
- if (ValueRead & MICROCODE_ADDRESS_PARITY) {
- DBG_ERROR("sxg: %s PARITY ERROR\n",
- __func__);
-
- return FALSE; /* Parity error */
- }
- ASSERT((ValueRead & MICROCODE_ADDRESS_MASK) == Address);
- /* Read the instruction back and compare */
- /* First instruction */
- instruction = *(u32 *)(fw->data + index);
- index += 4;
- READ_REG(HwRegs->UcodeDataLow, ValueRead);
- if (ValueRead != instruction) {
- DBG_ERROR("sxg: %s MISCOMPARE LOW\n",
- __func__);
- return FALSE; /* Miscompare */
- }
- instruction = *(u32 *)(fw->data + index);
- index += 4;
- READ_REG(HwRegs->UcodeDataMiddle, ValueRead);
- if (ValueRead != instruction) {
- DBG_ERROR("sxg: %s MISCOMPARE MIDDLE\n",
- __func__);
- return FALSE; /* Miscompare */
- }
- instruction = *(u32 *)(fw->data + index);
- index += 4;
- READ_REG(HwRegs->UcodeDataHigh, ValueRead);
- if (ValueRead != instruction) {
- DBG_ERROR("sxg: %s MISCOMPARE HIGH\n",
- __func__);
- return FALSE; /* Miscompare */
- }
- }
- }
-
- /* download finished */
- release_firmware(fw);
- /* Everything OK, Go. */
- WRITE_REG(HwRegs->UcodeAddr, MICROCODE_ADDRESS_GO, FLUSH);
-
- /*
- * Poll the CardUp register to wait for microcode to initialize
- * Give up after 10,000 attemps (500ms).
- */
- for (i = 0; i < 10000; i++) {
- udelay(50);
- READ_REG(adapter->UcodeRegs[0].CardUp, ValueRead);
- if (ValueRead == 0xCAFE) {
- break;
- }
- }
- if (i == 10000) {
- DBG_ERROR("sxg: %s TIMEOUT bringing up card - verify MICROCODE\n", __func__);
-
- return FALSE; /* Timeout */
- }
- /*
- * Now write the LoadSync register. This is used to
- * synchronize with the card so it can scribble on the memory
- * that contained 0xCAFE from the "CardUp" step above
- */
- if (UcodeSel == SXG_UCODE_SYSTEM) {
- WRITE_REG(adapter->UcodeRegs[0].LoadSync, 0, FLUSH);
- }
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDnldUcd",
- adapter, 0, 0, 0);
- return (TRUE);
-}
-
-/*
- * sxg_allocate_resources - Allocate memory and locks
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return - int
- */
-static int sxg_allocate_resources(struct adapter_t *adapter)
-{
- int status = STATUS_SUCCESS;
- u32 RssIds, IsrCount;
- /* struct sxg_xmt_ring *XmtRing; */
- /* struct sxg_rcv_ring *RcvRing; */
-
- DBG_ERROR("%s ENTER\n", __func__);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocRes",
- adapter, 0, 0, 0);
-
- /* Windows tells us how many CPUs it plans to use for */
- /* RSS */
- RssIds = SXG_RSS_CPU_COUNT(adapter);
- IsrCount = adapter->msi_enabled ? RssIds : 1;
-
- DBG_ERROR("%s Setup the spinlocks\n", __func__);
-
- /* Allocate spinlocks and initialize listheads first. */
- spin_lock_init(&adapter->RcvQLock);
- spin_lock_init(&adapter->SglQLock);
- spin_lock_init(&adapter->XmtZeroLock);
- spin_lock_init(&adapter->Bit64RegLock);
- spin_lock_init(&adapter->AdapterLock);
- atomic_set(&adapter->pending_allocations, 0);
-
- DBG_ERROR("%s Setup the lists\n", __func__);
-
- InitializeListHead(&adapter->FreeRcvBuffers);
- InitializeListHead(&adapter->FreeRcvBlocks);
- InitializeListHead(&adapter->AllRcvBlocks);
- InitializeListHead(&adapter->FreeSglBuffers);
- InitializeListHead(&adapter->AllSglBuffers);
-
- /*
- * Mark these basic allocations done. This flags essentially
- * tells the SxgFreeResources routine that it can grab spinlocks
- * and reference listheads.
- */
- adapter->BasicAllocations = TRUE;
- /*
- * Main allocation loop. Start with the maximum supported by
- * the microcode and back off if memory allocation
- * fails. If we hit a minimum, fail.
- */
-
- for (;;) {
- DBG_ERROR("%s Allocate XmtRings size[%x]\n", __func__,
- (unsigned int)(sizeof(struct sxg_xmt_ring) * 1));
-
- /*
- * Start with big items first - receive and transmit rings.
- * At the moment I'm going to keep the ring size fixed and
- * adjust the TCBs if we fail. Later we might
- * consider reducing the ring size as well..
- */
- adapter->XmtRings = pci_alloc_consistent(adapter->pcidev,
- sizeof(struct sxg_xmt_ring) *
- 1,
- &adapter->PXmtRings);
- DBG_ERROR("%s XmtRings[%p]\n", __func__, adapter->XmtRings);
-
- if (!adapter->XmtRings) {
- goto per_tcb_allocation_failed;
- }
- memset(adapter->XmtRings, 0, sizeof(struct sxg_xmt_ring) * 1);
-
- DBG_ERROR("%s Allocate RcvRings size[%x]\n", __func__,
- (unsigned int)(sizeof(struct sxg_rcv_ring) * 1));
- adapter->RcvRings =
- pci_alloc_consistent(adapter->pcidev,
- sizeof(struct sxg_rcv_ring) * 1,
- &adapter->PRcvRings);
- DBG_ERROR("%s RcvRings[%p]\n", __func__, adapter->RcvRings);
- if (!adapter->RcvRings) {
- goto per_tcb_allocation_failed;
- }
- memset(adapter->RcvRings, 0, sizeof(struct sxg_rcv_ring) * 1);
- adapter->ucode_stats = kzalloc(sizeof(struct sxg_ucode_stats), GFP_ATOMIC);
- adapter->pucode_stats = pci_map_single(adapter->pcidev,
- adapter->ucode_stats,
- sizeof(struct sxg_ucode_stats),
- PCI_DMA_FROMDEVICE);
-// memset(adapter->ucode_stats, 0, sizeof(struct sxg_ucode_stats));
- break;
-
- per_tcb_allocation_failed:
- /* an allocation failed. Free any successful allocations. */
- if (adapter->XmtRings) {
- pci_free_consistent(adapter->pcidev,
- sizeof(struct sxg_xmt_ring) * 1,
- adapter->XmtRings,
- adapter->PXmtRings);
- adapter->XmtRings = NULL;
- }
- if (adapter->RcvRings) {
- pci_free_consistent(adapter->pcidev,
- sizeof(struct sxg_rcv_ring) * 1,
- adapter->RcvRings,
- adapter->PRcvRings);
- adapter->RcvRings = NULL;
- }
- /* Loop around and try again.... */
- if (adapter->ucode_stats) {
- pci_unmap_single(adapter->pcidev,
- sizeof(struct sxg_ucode_stats),
- adapter->pucode_stats, PCI_DMA_FROMDEVICE);
- adapter->ucode_stats = NULL;
- }
-
- }
-
- DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __func__);
- /* Initialize rcv zero and xmt zero rings */
- SXG_INITIALIZE_RING(adapter->RcvRingZeroInfo, SXG_RCV_RING_SIZE);
- SXG_INITIALIZE_RING(adapter->XmtRingZeroInfo, SXG_XMT_RING_SIZE);
-
- /* Sanity check receive data structure format */
- /* ASSERT((adapter->ReceiveBufferSize == SXG_RCV_DATA_BUFFER_SIZE) ||
- (adapter->ReceiveBufferSize == SXG_RCV_JUMBO_BUFFER_SIZE)); */
- ASSERT(sizeof(struct sxg_rcv_descriptor_block) ==
- SXG_RCV_DESCRIPTOR_BLOCK_SIZE);
-
- DBG_ERROR("%s Allocate EventRings size[%x]\n", __func__,
- (unsigned int)(sizeof(struct sxg_event_ring) * RssIds));
-
- /* Allocate event queues. */
- adapter->EventRings = pci_alloc_consistent(adapter->pcidev,
- sizeof(struct sxg_event_ring) *
- RssIds,
- &adapter->PEventRings);
-
- if (!adapter->EventRings) {
- /* Caller will call SxgFreeAdapter to clean up above
- * allocations */
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF8",
- adapter, SXG_MAX_ENTRIES, 0, 0);
- status = STATUS_RESOURCES;
- goto per_tcb_allocation_failed;
- }
- memset(adapter->EventRings, 0, sizeof(struct sxg_event_ring) * RssIds);
-
- DBG_ERROR("%s Allocate ISR size[%x]\n", __func__, IsrCount);
- /* Allocate ISR */
- adapter->Isr = pci_alloc_consistent(adapter->pcidev,
- IsrCount, &adapter->PIsr);
- if (!adapter->Isr) {
- /* Caller will call SxgFreeAdapter to clean up above
- * allocations */
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF9",
- adapter, SXG_MAX_ENTRIES, 0, 0);
- status = STATUS_RESOURCES;
- goto per_tcb_allocation_failed;
- }
- memset(adapter->Isr, 0, sizeof(u32) * IsrCount);
-
- DBG_ERROR("%s Allocate shared XMT ring zero index location size[%x]\n",
- __func__, (unsigned int)sizeof(u32));
-
- /* Allocate shared XMT ring zero index location */
- adapter->XmtRingZeroIndex = pci_alloc_consistent(adapter->pcidev,
- sizeof(u32),
- &adapter->
- PXmtRingZeroIndex);
- if (!adapter->XmtRingZeroIndex) {
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF10",
- adapter, SXG_MAX_ENTRIES, 0, 0);
- status = STATUS_RESOURCES;
- goto per_tcb_allocation_failed;
- }
- memset(adapter->XmtRingZeroIndex, 0, sizeof(u32));
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlcResS",
- adapter, SXG_MAX_ENTRIES, 0, 0);
-
- return status;
-}
-
-/*
- * sxg_config_pci -
- *
- * Set up PCI Configuration space
- *
- * Arguments -
- * pcidev - A pointer to our adapter structure
- */
-static void sxg_config_pci(struct pci_dev *pcidev)
-{
- u16 pci_command;
- u16 new_command;
-
- pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
- DBG_ERROR("sxg: %s PCI command[%4.4x]\n", __func__, pci_command);
- /* Set the command register */
- new_command = pci_command | (
- /* Memory Space Enable */
- PCI_COMMAND_MEMORY |
- /* Bus master enable */
- PCI_COMMAND_MASTER |
- /* Memory write and invalidate */
- PCI_COMMAND_INVALIDATE |
- /* Parity error response */
- PCI_COMMAND_PARITY |
- /* System ERR */
- PCI_COMMAND_SERR |
- /* Fast back-to-back */
- PCI_COMMAND_FAST_BACK);
- if (pci_command != new_command) {
- DBG_ERROR("%s -- Updating PCI COMMAND register %4.4x->%4.4x.\n",
- __func__, pci_command, new_command);
- pci_write_config_word(pcidev, PCI_COMMAND, new_command);
- }
-}
-
-/*
- * sxg_read_config
- * @adapter : Pointer to the adapter structure for the card
- * This function will read the configuration data from EEPROM/FLASH
- */
-static inline int sxg_read_config(struct adapter_t *adapter)
-{
- /* struct sxg_config data; */
- struct sxg_config *config;
- struct sw_cfg_data *data;
- dma_addr_t p_addr;
- unsigned long status;
- unsigned long i;
- config = pci_alloc_consistent(adapter->pcidev,
- sizeof(struct sxg_config), &p_addr);
-
- if(!config) {
- /*
- * We cant get even this much memory. Raise a hell
- * Get out of here
- */
- printk(KERN_ERR"%s : Could not allocate memory for reading \
- EEPROM\n", __func__);
- return -ENOMEM;
- }
-
- data = &config->SwCfg;
-
- /* Initialize (reflective memory) status register */
- WRITE_REG(adapter->UcodeRegs[0].ConfigStat, SXG_CFG_TIMEOUT, TRUE);
-
- /* Send request to fetch configuration data */
- WRITE_REG64(adapter, adapter->UcodeRegs[0].Config, p_addr, 0);
- for(i=0; i<1000; i++) {
- READ_REG(adapter->UcodeRegs[0].ConfigStat, status);
- if (status != SXG_CFG_TIMEOUT)
- break;
- mdelay(1); /* Do we really need this */
- }
-
- switch(status) {
- /* Config read from EEPROM succeeded */
- case SXG_CFG_LOAD_EEPROM:
- /* Config read from Flash succeeded */
- case SXG_CFG_LOAD_FLASH:
- /*
- * Copy the MAC address to adapter structure
- * TODO: We are not doing the remaining part : FRU, etc
- */
- memcpy(adapter->macaddr, data->MacAddr[0].MacAddr,
- sizeof(struct sxg_config_mac));
- break;
- case SXG_CFG_TIMEOUT:
- case SXG_CFG_LOAD_INVALID:
- case SXG_CFG_LOAD_ERROR:
- default: /* Fix default handler later */
- printk(KERN_WARNING"%s : We could not read the config \
- word. Status = %ld\n", __func__, status);
- break;
- }
- pci_free_consistent(adapter->pcidev, sizeof(struct sw_cfg_data), data,
- p_addr);
- if (adapter->netdev) {
- memcpy(adapter->netdev->dev_addr, adapter->currmacaddr, 6);
- memcpy(adapter->netdev->perm_addr, adapter->currmacaddr, 6);
- }
- sxg_dbg_macaddrs(adapter);
-
- return status;
-}
-
-static const struct net_device_ops sxg_netdev_ops = {
- .ndo_open = sxg_entry_open,
- .ndo_stop = sxg_entry_halt,
- .ndo_start_xmit = sxg_send_packets,
- .ndo_do_ioctl = sxg_ioctl,
- .ndo_change_mtu = sxg_change_mtu,
- .ndo_get_stats = sxg_get_stats,
- .ndo_set_multicast_list = sxg_mcast_set_list,
- .ndo_validate_addr = eth_validate_addr,
-#if XXXTODO
- .ndo_set_mac_address = sxg_mac_set_address,
-#else
- .ndo_set_mac_address = eth_mac_addr,
-#endif
-};
-
-static int sxg_entry_probe(struct pci_dev *pcidev,
- const struct pci_device_id *pci_tbl_entry)
-{
- static int did_version = 0;
- int err;
- struct net_device *netdev;
- struct adapter_t *adapter;
- void __iomem *memmapped_ioaddr;
- u32 status = 0;
- ulong mmio_start = 0;
- ulong mmio_len = 0;
- unsigned char revision_id;
-
- DBG_ERROR("sxg: %s 2.6 VERSION ENTER jiffies[%lx] cpu %d\n",
- __func__, jiffies, smp_processor_id());
-
- /* Initialize trace buffer */
-#ifdef ATKDBG
- SxgTraceBuffer = &LSxgTraceBuffer;
- SXG_TRACE_INIT(SxgTraceBuffer, TRACE_NOISY);
-#endif
-
- sxg_global.dynamic_intagg = dynamic_intagg;
-
- err = pci_enable_device(pcidev);
-
- DBG_ERROR("Call pci_enable_device(%p) status[%x]\n", pcidev, err);
- if (err) {
- return err;
- }
-
- if (sxg_debug > 0 && did_version++ == 0) {
- printk(KERN_INFO "%s\n", sxg_banner);
- printk(KERN_INFO "%s\n", SXG_DRV_VERSION);
- }
-
- pci_read_config_byte(pcidev, PCI_REVISION_ID, &revision_id);
-
- if (!(err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(64)))) {
- DBG_ERROR("pci_set_dma_mask(DMA_BIT_MASK(64)) successful\n");
- } else {
- if ((err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32)))) {
- DBG_ERROR
- ("No usable DMA configuration, aborting err[%x]\n",
- err);
- return err;
- }
- DBG_ERROR("pci_set_dma_mask(DMA_BIT_MASK(32)) successful\n");
- }
-
- DBG_ERROR("Call pci_request_regions\n");
-
- err = pci_request_regions(pcidev, sxg_driver_name);
- if (err) {
- DBG_ERROR("pci_request_regions FAILED err[%x]\n", err);
- return err;
- }
-
- DBG_ERROR("call pci_set_master\n");
- pci_set_master(pcidev);
-
- DBG_ERROR("call alloc_etherdev\n");
- netdev = alloc_etherdev(sizeof(struct adapter_t));
- if (!netdev) {
- err = -ENOMEM;
- goto err_out_exit_sxg_probe;
- }
- DBG_ERROR("alloc_etherdev for slic netdev[%p]\n", netdev);
-
- SET_NETDEV_DEV(netdev, &pcidev->dev);
-
- pci_set_drvdata(pcidev, netdev);
- adapter = netdev_priv(netdev);
- if (revision_id == 1) {
- adapter->asictype = SAHARA_REV_A;
- } else if (revision_id == 2) {
- adapter->asictype = SAHARA_REV_B;
- } else {
- ASSERT(0);
- DBG_ERROR("%s Unexpected revision ID %x\n", __func__, revision_id);
- goto err_out_exit_sxg_probe;
- }
- adapter->netdev = netdev;
- adapter->pcidev = pcidev;
-
- mmio_start = pci_resource_start(pcidev, 0);
- mmio_len = pci_resource_len(pcidev, 0);
-
- DBG_ERROR("sxg: call ioremap(mmio_start[%lx], mmio_len[%lx])\n",
- mmio_start, mmio_len);
-
- memmapped_ioaddr = ioremap(mmio_start, mmio_len);
- DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __func__,
- memmapped_ioaddr);
- if (!memmapped_ioaddr) {
- DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n",
- __func__, mmio_len, mmio_start);
- goto err_out_free_mmio_region_0;
- }
-
- DBG_ERROR("sxg: %s found Alacritech SXG PCI, MMIO at %p, start[%lx] \
- len[%lx], IRQ %d.\n", __func__, memmapped_ioaddr, mmio_start,
- mmio_len, pcidev->irq);
-
- adapter->HwRegs = (void *)memmapped_ioaddr;
- adapter->base_addr = memmapped_ioaddr;
-
- mmio_start = pci_resource_start(pcidev, 2);
- mmio_len = pci_resource_len(pcidev, 2);
-
- DBG_ERROR("sxg: call ioremap(mmio_start[%lx], mmio_len[%lx])\n",
- mmio_start, mmio_len);
-
- memmapped_ioaddr = ioremap(mmio_start, mmio_len);
- DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __func__,
- memmapped_ioaddr);
- if (!memmapped_ioaddr) {
- DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n",
- __func__, mmio_len, mmio_start);
- goto err_out_free_mmio_region_2;
- }
-
- DBG_ERROR("sxg: %s found Alacritech SXG PCI, MMIO at %p, "
- "start[%lx] len[%lx], IRQ %d.\n", __func__,
- memmapped_ioaddr, mmio_start, mmio_len, pcidev->irq);
-
- adapter->UcodeRegs = (void *)memmapped_ioaddr;
-
- adapter->State = SXG_STATE_INITIALIZING;
- /*
- * Maintain a list of all adapters anchored by
- * the global SxgDriver structure.
- */
- adapter->Next = SxgDriver.Adapters;
- SxgDriver.Adapters = adapter;
- adapter->AdapterID = ++SxgDriver.AdapterID;
-
- /* Initialize CRC table used to determine multicast hash */
- sxg_mcast_init_crc32();
-
- adapter->JumboEnabled = FALSE;
- adapter->RssEnabled = FALSE;
- if (adapter->JumboEnabled) {
- adapter->FrameSize = JUMBOMAXFRAME;
- adapter->ReceiveBufferSize = SXG_RCV_JUMBO_BUFFER_SIZE;
- } else {
- adapter->FrameSize = ETHERMAXFRAME;
- adapter->ReceiveBufferSize = SXG_RCV_DATA_BUFFER_SIZE;
- }
-
- /*
- * status = SXG_READ_EEPROM(adapter);
- * if (!status) {
- * goto sxg_init_bad;
- * }
- */
-
- DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __func__);
- sxg_config_pci(pcidev);
- DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __func__);
-
- DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __func__);
- sxg_init_driver();
- DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __func__);
-
- adapter->vendid = pci_tbl_entry->vendor;
- adapter->devid = pci_tbl_entry->device;
- adapter->subsysid = pci_tbl_entry->subdevice;
- adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
- adapter->functionnumber = (pcidev->devfn & 0x7);
- adapter->memorylength = pci_resource_len(pcidev, 0);
- adapter->irq = pcidev->irq;
- adapter->next_netdevice = head_netdevice;
- head_netdevice = netdev;
- adapter->port = 0; /*adapter->functionnumber; */
-
- /* Allocate memory and other resources */
- DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __func__);
- status = sxg_allocate_resources(adapter);
- DBG_ERROR("sxg: %s EXIT sxg_allocate_resources status %x\n",
- __func__, status);
- if (status != STATUS_SUCCESS) {
- goto err_out_unmap;
- }
-
- DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __func__);
- if (sxg_download_microcode(adapter, SXG_UCODE_SYSTEM)) {
- DBG_ERROR("sxg: %s ENTER sxg_adapter_set_hwaddr\n",
- __func__);
- sxg_read_config(adapter);
- status = sxg_adapter_set_hwaddr(adapter);
- } else {
- adapter->state = ADAPT_FAIL;
- adapter->linkstate = LINK_DOWN;
- DBG_ERROR("sxg_download_microcode FAILED status[%x]\n", status);
- }
-
- netdev->base_addr = (unsigned long)adapter->base_addr;
- netdev->irq = adapter->irq;
- netdev->netdev_ops = &sxg_netdev_ops;
- SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
- netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- err = sxg_set_interrupt_capability(adapter);
- if (err != STATUS_SUCCESS)
- DBG_ERROR("Cannot enable MSI-X capability\n");
-
- strcpy(netdev->name, "eth%d");
- /* strcpy(netdev->name, pci_name(pcidev)); */
- if ((err = register_netdev(netdev))) {
- DBG_ERROR("Cannot register net device, aborting. %s\n",
- netdev->name);
- goto err_out_unmap;
- }
-
- netif_napi_add(netdev, &adapter->napi,
- sxg_poll, SXG_NETDEV_WEIGHT);
- netdev->watchdog_timeo = 2 * HZ;
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = &sxg_watchdog;
- adapter->watchdog_timer.data = (unsigned long) adapter;
- INIT_WORK(&adapter->update_link_status, sxg_update_link_status);
-
- DBG_ERROR
- ("sxg: %s addr 0x%lx, irq %d, MAC addr \
- %02X:%02X:%02X:%02X:%02X:%02X\n",
- netdev->name, netdev->base_addr, pcidev->irq, netdev->dev_addr[0],
- netdev->dev_addr[1], netdev->dev_addr[2], netdev->dev_addr[3],
- netdev->dev_addr[4], netdev->dev_addr[5]);
-
- /* sxg_init_bad: */
- ASSERT(status == FALSE);
- /* sxg_free_adapter(adapter); */
-
- DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __func__,
- status, jiffies, smp_processor_id());
- return status;
-
- err_out_unmap:
- sxg_free_resources(adapter);
-
- err_out_free_mmio_region_2:
-
- mmio_start = pci_resource_start(pcidev, 2);
- mmio_len = pci_resource_len(pcidev, 2);
- release_mem_region(mmio_start, mmio_len);
-
- err_out_free_mmio_region_0:
-
- mmio_start = pci_resource_start(pcidev, 0);
- mmio_len = pci_resource_len(pcidev, 0);
-
- release_mem_region(mmio_start, mmio_len);
-
- err_out_exit_sxg_probe:
-
- DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __func__, jiffies,
- smp_processor_id());
-
- pci_disable_device(pcidev);
- DBG_ERROR("sxg: %s deallocate device\n", __func__);
- kfree(netdev);
- printk("Exit %s, Sxg driver loading failed..\n", __func__);
-
- return -ENODEV;
-}
-
-/*
- * LINE BASE Interrupt routines..
- *
- * sxg_disable_interrupt
- *
- * DisableInterrupt Handler
- *
- * Arguments:
- *
- * adapter: Our adapter structure
- *
- * Return Value:
- * None.
- */
-static void sxg_disable_interrupt(struct adapter_t *adapter)
-{
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DisIntr",
- adapter, adapter->InterruptsEnabled, 0, 0);
- /* For now, RSS is disabled with line based interrupts */
- ASSERT(adapter->RssEnabled == FALSE);
- /* Turn off interrupts by writing to the icr register. */
- WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_DISABLE), TRUE);
-
- adapter->InterruptsEnabled = 0;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDisIntr",
- adapter, adapter->InterruptsEnabled, 0, 0);
-}
-
-/*
- * sxg_enable_interrupt
- *
- * EnableInterrupt Handler
- *
- * Arguments:
- *
- * adapter: Our adapter structure
- *
- * Return Value:
- * None.
- */
-static void sxg_enable_interrupt(struct adapter_t *adapter)
-{
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EnIntr",
- adapter, adapter->InterruptsEnabled, 0, 0);
- /* For now, RSS is disabled with line based interrupts */
- ASSERT(adapter->RssEnabled == FALSE);
- /* Turn on interrupts by writing to the icr register. */
- WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_ENABLE), TRUE);
-
- adapter->InterruptsEnabled = 1;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XEnIntr",
- adapter, 0, 0, 0);
-}
-
-/*
- * sxg_isr - Process an line-based interrupt
- *
- * Arguments:
- * Context - Our adapter structure
- * QueueDefault - Output parameter to queue to default CPU
- * TargetCpus - Output bitmap to schedule DPC's
- *
- * Return Value: TRUE if our interrupt
- */
-static irqreturn_t sxg_isr(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
-
- if(adapter->state != ADAPT_UP)
- return IRQ_NONE;
- adapter->Stats.NumInts++;
- if (adapter->Isr[0] == 0) {
- /*
- * The SLIC driver used to experience a number of spurious
- * interrupts due to the delay associated with the masking of
- * the interrupt (we'd bounce back in here). If we see that
- * again with Sahara,add a READ_REG of the Icr register after
- * the WRITE_REG below.
- */
- adapter->Stats.FalseInts++;
- return IRQ_NONE;
- }
- /*
- * Move the Isr contents and clear the value in
- * shared memory, and mask interrupts
- */
- /* ASSERT(adapter->IsrDpcsPending == 0); */
-#if XXXTODO /* RSS Stuff */
- /*
- * If RSS is enabled and the ISR specifies SXG_ISR_EVENT, then
- * schedule DPC's based on event queues.
- */
- if (adapter->RssEnabled && (adapter->IsrCopy[0] & SXG_ISR_EVENT)) {
- for (i = 0;
- i < adapter->RssSystemInfo->ProcessorInfo.RssCpuCount;
- i++) {
- struct sxg_event_ring *EventRing =
- &adapter->EventRings[i];
- struct sxg_event *Event =
- &EventRing->Ring[adapter->NextEvent[i]];
- unsigned char Cpu =
- adapter->RssSystemInfo->RssIdToCpu[i];
- if (Event->Status & EVENT_STATUS_VALID) {
- adapter->IsrDpcsPending++;
- CpuMask |= (1 << Cpu);
- }
- }
- }
- /*
- * Now, either schedule the CPUs specified by the CpuMask,
- * or queue default
- */
- if (CpuMask) {
- *QueueDefault = FALSE;
- } else {
- adapter->IsrDpcsPending = 1;
- *QueueDefault = TRUE;
- }
- *TargetCpus = CpuMask;
-#endif
- sxg_interrupt(adapter);
-
- return IRQ_HANDLED;
-}
-
-static void sxg_interrupt(struct adapter_t *adapter)
-{
- WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_MASK), TRUE);
-
- if (napi_schedule_prep(&adapter->napi)) {
- __napi_schedule(&adapter->napi);
- }
-}
-
-static void sxg_handle_interrupt(struct adapter_t *adapter, int *work_done,
- int budget)
-{
- /* unsigned char RssId = 0; */
- u32 NewIsr;
- int sxg_napi_continue = 1;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "HndlIntr",
- adapter, adapter->IsrCopy[0], 0, 0);
- /* For now, RSS is disabled with line based interrupts */
- ASSERT(adapter->RssEnabled == FALSE);
-
- adapter->IsrCopy[0] = adapter->Isr[0];
- adapter->Isr[0] = 0;
-
- /* Always process the event queue. */
- while (sxg_napi_continue)
- {
- sxg_process_event_queue(adapter,
- (adapter->RssEnabled ? /*RssId */ 0 : 0),
- &sxg_napi_continue, work_done, budget);
- }
-
-#if XXXTODO /* RSS stuff */
- if (--adapter->IsrDpcsPending) {
- /* We're done. */
- ASSERT(adapter->RssEnabled);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DPCsPend",
- adapter, 0, 0, 0);
- return;
- }
-#endif
- /* Last (or only) DPC processes the ISR and clears the interrupt. */
- NewIsr = sxg_process_isr(adapter, 0);
- /* Reenable interrupts */
- adapter->IsrCopy[0] = 0;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ClearIsr",
- adapter, NewIsr, 0, 0);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XHndlInt",
- adapter, 0, 0, 0);
-}
-static int sxg_poll(struct napi_struct *napi, int budget)
-{
- struct adapter_t *adapter = container_of(napi, struct adapter_t, napi);
- int work_done = 0;
-
- sxg_handle_interrupt(adapter, &work_done, budget);
-
- if (work_done < budget) {
- napi_complete(napi);
- WRITE_REG(adapter->UcodeRegs[0].Isr, 0, TRUE);
- }
- return work_done;
-}
-
-/*
- * sxg_process_isr - Process an interrupt. Called from the line-based and
- * message based interrupt DPC routines
- *
- * Arguments:
- * adapter - Our adapter structure
- * Queue - The ISR that needs processing
- *
- * Return Value:
- * None
- */
-static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId)
-{
- u32 Isr = adapter->IsrCopy[MessageId];
- u32 NewIsr = 0;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ProcIsr",
- adapter, Isr, 0, 0);
-
- /* Error */
- if (Isr & SXG_ISR_ERR) {
- if (Isr & SXG_ISR_PDQF) {
- adapter->Stats.PdqFull++;
- DBG_ERROR("%s: SXG_ISR_ERR PDQF!!\n", __func__);
- }
- /* No host buffer */
- if (Isr & SXG_ISR_RMISS) {
- /*
- * There is a bunch of code in the SLIC driver which
- * attempts to process more receive events per DPC
- * if we start to fall behind. We'll probablyd
- * need to do something similar here, but hold
- * off for now. I don't want to make the code more
- * complicated than strictly needed.
- */
- adapter->stats.rx_missed_errors++;
- if (adapter->stats.rx_missed_errors< 5) {
- DBG_ERROR("%s: SXG_ISR_ERR RMISS!!\n",
- __func__);
- }
- }
- /* Card crash */
- if (Isr & SXG_ISR_DEAD) {
- /*
- * Set aside the crash info and set the adapter state
- * to RESET
- */
- adapter->CrashCpu = (unsigned char)
- ((Isr & SXG_ISR_CPU) >> SXG_ISR_CPU_SHIFT);
- adapter->CrashLocation = (ushort) (Isr & SXG_ISR_CRASH);
- adapter->Dead = TRUE;
- DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __func__,
- adapter->CrashLocation, adapter->CrashCpu);
- }
- /* Event ring full */
- if (Isr & SXG_ISR_ERFULL) {
- /*
- * Same issue as RMISS, really. This means the
- * host is falling behind the card. Need to increase
- * event ring size, process more events per interrupt,
- * and/or reduce/remove interrupt aggregation.
- */
- adapter->Stats.EventRingFull++;
- DBG_ERROR("%s: SXG_ISR_ERR EVENT RING FULL!!\n",
- __func__);
- }
- /* Transmit drop - no DRAM buffers or XMT error */
- if (Isr & SXG_ISR_XDROP) {
- DBG_ERROR("%s: SXG_ISR_ERR XDROP!!\n", __func__);
- }
- }
- /* Slowpath send completions */
- if (Isr & SXG_ISR_SPSEND) {
- sxg_complete_slow_send(adapter);
- }
- /* Dump */
- if (Isr & SXG_ISR_UPC) {
- /* Maybe change when debug is added.. */
-// ASSERT(adapter->DumpCmdRunning);
- adapter->DumpCmdRunning = FALSE;
- }
- /* Link event */
- if (Isr & SXG_ISR_LINK) {
- if (adapter->state != ADAPT_DOWN) {
- adapter->link_status_changed = 1;
- schedule_work(&adapter->update_link_status);
- }
- }
- /* Debug - breakpoint hit */
- if (Isr & SXG_ISR_BREAK) {
- /*
- * At the moment AGDB isn't written to support interactive
- * debug sessions. When it is, this interrupt will be used to
- * signal AGDB that it has hit a breakpoint. For now, ASSERT.
- */
- ASSERT(0);
- }
- /* Heartbeat response */
- if (Isr & SXG_ISR_PING) {
- adapter->PingOutstanding = FALSE;
- }
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XProcIsr",
- adapter, Isr, NewIsr, 0);
-
- return (NewIsr);
-}
-
-/*
- * sxg_rcv_checksum - Set the checksum for received packet
- *
- * Arguements:
- * @adapter - Adapter structure on which packet is received
- * @skb - Packet which is receieved
- * @Event - Event read from hardware
- */
-
-void sxg_rcv_checksum(struct adapter_t *adapter, struct sk_buff *skb,
- struct sxg_event *Event)
-{
- skb->ip_summed = CHECKSUM_NONE;
- if (likely(adapter->flags & SXG_RCV_IP_CSUM_ENABLED)) {
- if (likely(adapter->flags & SXG_RCV_TCP_CSUM_ENABLED)
- && (Event->Status & EVENT_STATUS_TCPIP)) {
- if(!(Event->Status & EVENT_STATUS_TCPBAD))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- if(!(Event->Status & EVENT_STATUS_IPBAD))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else if(Event->Status & EVENT_STATUS_IPONLY) {
- if(!(Event->Status & EVENT_STATUS_IPBAD))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- }
- }
-}
-
-/*
- * sxg_process_event_queue - Process our event queue
- *
- * Arguments:
- * - adapter - Adapter structure
- * - RssId - The event queue requiring processing
- *
- * Return Value:
- * None.
- */
-static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId,
- int *sxg_napi_continue, int *work_done, int budget)
-{
- struct sxg_event_ring *EventRing = &adapter->EventRings[RssId];
- struct sxg_event *Event = &EventRing->Ring[adapter->NextEvent[RssId]];
- u32 EventsProcessed = 0, Batches = 0;
- struct sk_buff *skb;
-#ifdef LINUX_HANDLES_RCV_INDICATION_LISTS
- struct sk_buff *prev_skb = NULL;
- struct sk_buff *IndicationList[SXG_RCV_ARRAYSIZE];
- u32 Index;
- struct sxg_rcv_data_buffer_hdr *RcvDataBufferHdr;
-#endif
- u32 ReturnStatus = 0;
- int sxg_rcv_data_buffers = SXG_RCV_DATA_BUFFERS;
-
- ASSERT((adapter->State == SXG_STATE_RUNNING) ||
- (adapter->State == SXG_STATE_PAUSING) ||
- (adapter->State == SXG_STATE_PAUSED) ||
- (adapter->State == SXG_STATE_HALTING));
- /*
- * We may still have unprocessed events on the queue if
- * the card crashed. Don't process them.
- */
- if (adapter->Dead) {
- return (0);
- }
- /*
- * In theory there should only be a single processor that
- * accesses this queue, and only at interrupt-DPC time. So/
- * we shouldn't need a lock for any of this.
- */
- while (Event->Status & EVENT_STATUS_VALID) {
- (*sxg_napi_continue) = 1;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "Event",
- Event, Event->Code, Event->Status,
- adapter->NextEvent);
- switch (Event->Code) {
- case EVENT_CODE_BUFFERS:
- /* struct sxg_ring_info Head & Tail == unsigned char */
- ASSERT(!(Event->CommandIndex & 0xFF00));
- sxg_complete_descriptor_blocks(adapter,
- Event->CommandIndex);
- break;
- case EVENT_CODE_SLOWRCV:
- (*work_done)++;
- --adapter->RcvBuffersOnCard;
- if ((skb = sxg_slow_receive(adapter, Event))) {
- u32 rx_bytes;
-#ifdef LINUX_HANDLES_RCV_INDICATION_LISTS
- /* Add it to our indication list */
- SXG_ADD_RCV_PACKET(adapter, skb, prev_skb,
- IndicationList, num_skbs);
- /*
- * Linux, we just pass up each skb to the
- * protocol above at this point, there is no
- * capability of an indication list.
- */
-#else
- /* CHECK skb_pull(skb, INIC_RCVBUF_HEADSIZE); */
- /* (rcvbuf->length & IRHDDR_FLEN_MSK); */
- rx_bytes = Event->Length;
- adapter->stats.rx_packets++;
- adapter->stats.rx_bytes += rx_bytes;
- sxg_rcv_checksum(adapter, skb, Event);
- skb->dev = adapter->netdev;
- netif_receive_skb(skb);
-#endif
- }
- break;
- default:
- DBG_ERROR("%s: ERROR Invalid EventCode %d\n",
- __func__, Event->Code);
- /* ASSERT(0); */
- }
- /*
- * See if we need to restock card receive buffers.
- * There are two things to note here:
- * First - This test is not SMP safe. The
- * adapter->BuffersOnCard field is protected via atomic
- * interlocked calls, but we do not protect it with respect
- * to these tests. The only way to do that is with a lock,
- * and I don't want to grab a lock every time we adjust the
- * BuffersOnCard count. Instead, we allow the buffer
- * replenishment to be off once in a while. The worst that
- * can happen is the card is given on more-or-less descriptor
- * block than the arbitrary value we've chosen. No big deal
- * In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard
- * is adjusted.
- * Second - We expect this test to rarely
- * evaluate to true. We attempt to refill descriptor blocks
- * as they are returned to us (sxg_complete_descriptor_blocks)
- * so The only time this should evaluate to true is when
- * sxg_complete_descriptor_blocks failed to allocate
- * receive buffers.
- */
- if (adapter->JumboEnabled)
- sxg_rcv_data_buffers = SXG_JUMBO_RCV_DATA_BUFFERS;
-
- if (adapter->RcvBuffersOnCard < sxg_rcv_data_buffers) {
- sxg_stock_rcv_buffers(adapter);
- }
- /*
- * It's more efficient to just set this to zero.
- * But clearing the top bit saves potential debug info...
- */
- Event->Status &= ~EVENT_STATUS_VALID;
- /* Advance to the next event */
- SXG_ADVANCE_INDEX(adapter->NextEvent[RssId], EVENT_RING_SIZE);
- Event = &EventRing->Ring[adapter->NextEvent[RssId]];
- EventsProcessed++;
- if (EventsProcessed == EVENT_RING_BATCH) {
- /* Release a batch of events back to the card */
- WRITE_REG(adapter->UcodeRegs[RssId].EventRelease,
- EVENT_RING_BATCH, FALSE);
- EventsProcessed = 0;
- /*
- * If we've processed our batch limit, break out of the
- * loop and return SXG_ISR_EVENT to arrange for us to
- * be called again
- */
- if (Batches++ == EVENT_BATCH_LIMIT) {
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer,
- TRACE_NOISY, "EvtLimit", Batches,
- adapter->NextEvent, 0, 0);
- ReturnStatus = SXG_ISR_EVENT;
- break;
- }
- }
- if (*work_done >= budget) {
- WRITE_REG(adapter->UcodeRegs[RssId].EventRelease,
- EventsProcessed, FALSE);
- EventsProcessed = 0;
- (*sxg_napi_continue) = 0;
- break;
- }
- }
- if (!(Event->Status & EVENT_STATUS_VALID))
- (*sxg_napi_continue) = 0;
-
-#ifdef LINUX_HANDLES_RCV_INDICATION_LISTS
- /* Indicate any received dumb-nic frames */
- SXG_INDICATE_PACKETS(adapter, IndicationList, num_skbs);
-#endif
- /* Release events back to the card. */
- if (EventsProcessed) {
- WRITE_REG(adapter->UcodeRegs[RssId].EventRelease,
- EventsProcessed, FALSE);
- }
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XPrcEvnt",
- Batches, EventsProcessed, adapter->NextEvent, num_skbs);
-
- return (ReturnStatus);
-}
-
-/*
- * sxg_complete_slow_send - Complete slowpath or dumb-nic sends
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * Return
- * None
- */
-static void sxg_complete_slow_send(struct adapter_t *adapter)
-{
- struct sxg_xmt_ring *XmtRing = &adapter->XmtRings[0];
- struct sxg_ring_info *XmtRingInfo = &adapter->XmtRingZeroInfo;
- u32 *ContextType;
- struct sxg_cmd *XmtCmd;
- unsigned long flags = 0;
- unsigned long sgl_flags = 0;
- unsigned int processed_count = 0;
-
- /*
- * NOTE - This lock is dropped and regrabbed in this loop.
- * This means two different processors can both be running/
- * through this loop. Be *very* careful.
- */
- spin_lock_irqsave(&adapter->XmtZeroLock, flags);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnds",
- adapter, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
-
- while ((XmtRingInfo->Tail != *adapter->XmtRingZeroIndex)
- && processed_count++ < SXG_COMPLETE_SLOW_SEND_LIMIT) {
- /*
- * Locate the current Cmd (ring descriptor entry), and
- * associated SGL, and advance the tail
- */
- SXG_RETURN_CMD(XmtRing, XmtRingInfo, XmtCmd, ContextType);
- ASSERT(ContextType);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnd",
- XmtRingInfo->Head, XmtRingInfo->Tail, XmtCmd, 0);
- /* Clear the SGL field. */
- XmtCmd->Sgl = 0;
-
- switch (*ContextType) {
- case SXG_SGL_DUMB:
- {
- struct sk_buff *skb;
- struct sxg_scatter_gather *SxgSgl =
- (struct sxg_scatter_gather *)ContextType;
- dma64_addr_t FirstSgeAddress;
- u32 FirstSgeLength;
-
- /* Dumb-nic send. Command context is the dumb-nic SGL */
- skb = (struct sk_buff *)ContextType;
- skb = SxgSgl->DumbPacket;
- FirstSgeAddress = XmtCmd->Buffer.FirstSgeAddress;
- FirstSgeLength = XmtCmd->Buffer.FirstSgeLength;
- /* Complete the send */
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer,
- TRACE_IMPORTANT, "DmSndCmp", skb, 0,
- 0, 0);
- ASSERT(adapter->Stats.XmtQLen);
- /*
- * Now drop the lock and complete the send
- * back to Microsoft. We need to drop the lock
- * because Microsoft can come back with a
- * chimney send, which results in a double trip
- * in SxgTcpOuput
- */
- spin_unlock_irqrestore(
- &adapter->XmtZeroLock, flags);
-
- SxgSgl->DumbPacket = NULL;
- SXG_COMPLETE_DUMB_SEND(adapter, skb,
- FirstSgeAddress,
- FirstSgeLength);
- SXG_FREE_SGL_BUFFER(adapter, SxgSgl, NULL);
- /* and reacquire.. */
- spin_lock_irqsave(&adapter->XmtZeroLock, flags);
- }
- break;
- default:
- ASSERT(0);
- }
- }
- spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnd",
- adapter, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
-}
-
-/*
- * sxg_slow_receive
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * Event - Receive event
- *
- * Return - skb
- */
-static struct sk_buff *sxg_slow_receive(struct adapter_t *adapter,
- struct sxg_event *Event)
-{
- u32 BufferSize = adapter->ReceiveBufferSize;
- struct sxg_rcv_data_buffer_hdr *RcvDataBufferHdr;
- struct sk_buff *Packet;
- static int read_counter = 0;
-
- RcvDataBufferHdr = (struct sxg_rcv_data_buffer_hdr *) Event->HostHandle;
- if(read_counter++ & 0x100)
- {
- sxg_collect_statistics(adapter);
- read_counter = 0;
- }
- ASSERT(RcvDataBufferHdr);
- ASSERT(RcvDataBufferHdr->State == SXG_BUFFER_ONCARD);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "SlowRcv", Event,
- RcvDataBufferHdr, RcvDataBufferHdr->State,
- /*RcvDataBufferHdr->VirtualAddress*/ 0);
- /* Drop rcv frames in non-running state */
- switch (adapter->State) {
- case SXG_STATE_RUNNING:
- break;
- case SXG_STATE_PAUSING:
- case SXG_STATE_PAUSED:
- case SXG_STATE_HALTING:
- goto drop;
- default:
- ASSERT(0);
- goto drop;
- }
-
- /*
- * memcpy(SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr),
- * RcvDataBufferHdr->VirtualAddress, Event->Length);
- */
-
- /* Change buffer state to UPSTREAM */
- RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM;
- if (Event->Status & EVENT_STATUS_RCVERR) {
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvError",
- Event, Event->Status, Event->HostHandle, 0);
- sxg_process_rcv_error(adapter, *(u32 *)
- SXG_RECEIVE_DATA_LOCATION
- (RcvDataBufferHdr));
- goto drop;
- }
-#if XXXTODO /* VLAN stuff */
- /* If there's a VLAN tag, extract it and validate it */
- if (((struct ether_header *)
- (SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)))->EtherType
- == ETHERTYPE_VLAN) {
- if (SxgExtractVlanHeader(adapter, RcvDataBufferHdr, Event) !=
- STATUS_SUCCESS) {
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY,
- "BadVlan", Event,
- SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr),
- Event->Length, 0);
- goto drop;
- }
- }
-#endif
- /* Dumb-nic frame. See if it passes our mac filter and update stats */
-
- if (!sxg_mac_filter(adapter,
- (struct ether_header *)(SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)),
- Event->Length)) {
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvFiltr",
- Event, SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr),
- Event->Length, 0);
- goto drop;
- }
-
- Packet = RcvDataBufferHdr->SxgDumbRcvPacket;
- SXG_ADJUST_RCV_PACKET(Packet, RcvDataBufferHdr, Event);
- Packet->protocol = eth_type_trans(Packet, adapter->netdev);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumbRcv",
- RcvDataBufferHdr, Packet, Event->Length, 0);
- /* Lastly adjust the receive packet length. */
- RcvDataBufferHdr->SxgDumbRcvPacket = NULL;
- RcvDataBufferHdr->PhysicalAddress = (dma_addr_t)NULL;
- SXG_ALLOCATE_RCV_PACKET(adapter, RcvDataBufferHdr, BufferSize);
- if (RcvDataBufferHdr->skb)
- {
- spin_lock(&adapter->RcvQLock);
- SXG_FREE_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr);
- // adapter->RcvBuffersOnCard ++;
- spin_unlock(&adapter->RcvQLock);
- }
- return (Packet);
-
- drop:
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DropRcv",
- RcvDataBufferHdr, Event->Length, 0, 0);
- adapter->stats.rx_dropped++;
-// adapter->Stats.RcvDiscards++;
- spin_lock(&adapter->RcvQLock);
- SXG_FREE_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr);
- spin_unlock(&adapter->RcvQLock);
- return (NULL);
-}
-
-/*
- * sxg_process_rcv_error - process receive error and update
- * stats
- *
- * Arguments:
- * adapter - Adapter structure
- * ErrorStatus - 4-byte receive error status
- *
- * Return Value : None
- */
-static void sxg_process_rcv_error(struct adapter_t *adapter, u32 ErrorStatus)
-{
- u32 Error;
-
- adapter->stats.rx_errors++;
-
- if (ErrorStatus & SXG_RCV_STATUS_TRANSPORT_ERROR) {
- Error = ErrorStatus & SXG_RCV_STATUS_TRANSPORT_MASK;
- switch (Error) {
- case SXG_RCV_STATUS_TRANSPORT_CSUM:
- adapter->Stats.TransportCsum++;
- break;
- case SXG_RCV_STATUS_TRANSPORT_UFLOW:
- adapter->Stats.TransportUflow++;
- break;
- case SXG_RCV_STATUS_TRANSPORT_HDRLEN:
- adapter->Stats.TransportHdrLen++;
- break;
- }
- }
- if (ErrorStatus & SXG_RCV_STATUS_NETWORK_ERROR) {
- Error = ErrorStatus & SXG_RCV_STATUS_NETWORK_MASK;
- switch (Error) {
- case SXG_RCV_STATUS_NETWORK_CSUM:
- adapter->Stats.NetworkCsum++;
- break;
- case SXG_RCV_STATUS_NETWORK_UFLOW:
- adapter->Stats.NetworkUflow++;
- break;
- case SXG_RCV_STATUS_NETWORK_HDRLEN:
- adapter->Stats.NetworkHdrLen++;
- break;
- }
- }
- if (ErrorStatus & SXG_RCV_STATUS_PARITY) {
- adapter->Stats.Parity++;
- }
- if (ErrorStatus & SXG_RCV_STATUS_LINK_ERROR) {
- Error = ErrorStatus & SXG_RCV_STATUS_LINK_MASK;
- switch (Error) {
- case SXG_RCV_STATUS_LINK_PARITY:
- adapter->Stats.LinkParity++;
- break;
- case SXG_RCV_STATUS_LINK_EARLY:
- adapter->Stats.LinkEarly++;
- break;
- case SXG_RCV_STATUS_LINK_BUFOFLOW:
- adapter->Stats.LinkBufOflow++;
- break;
- case SXG_RCV_STATUS_LINK_CODE:
- adapter->Stats.LinkCode++;
- break;
- case SXG_RCV_STATUS_LINK_DRIBBLE:
- adapter->Stats.LinkDribble++;
- break;
- case SXG_RCV_STATUS_LINK_CRC:
- adapter->Stats.LinkCrc++;
- break;
- case SXG_RCV_STATUS_LINK_OFLOW:
- adapter->Stats.LinkOflow++;
- break;
- case SXG_RCV_STATUS_LINK_UFLOW:
- adapter->Stats.LinkUflow++;
- break;
- }
- }
-}
-
-/*
- * sxg_mac_filter
- *
- * Arguments:
- * adapter - Adapter structure
- * pether - Ethernet header
- * length - Frame length
- *
- * Return Value : TRUE if the frame is to be allowed
- */
-static bool sxg_mac_filter(struct adapter_t *adapter,
- struct ether_header *EtherHdr, ushort length)
-{
- bool EqualAddr;
- struct net_device *dev = adapter->netdev;
-
- if (SXG_MULTICAST_PACKET(EtherHdr)) {
- if (SXG_BROADCAST_PACKET(EtherHdr)) {
- /* broadcast */
- if (adapter->MacFilter & MAC_BCAST) {
- adapter->Stats.DumbRcvBcastPkts++;
- adapter->Stats.DumbRcvBcastBytes += length;
- return (TRUE);
- }
- } else {
- /* multicast */
- if (adapter->MacFilter & MAC_ALLMCAST) {
- adapter->Stats.DumbRcvMcastPkts++;
- adapter->Stats.DumbRcvMcastBytes += length;
- return (TRUE);
- }
- if (adapter->MacFilter & MAC_MCAST) {
- struct dev_mc_list *mclist = dev->mc_list;
- while (mclist) {
- ETHER_EQ_ADDR(mclist->da_addr,
- EtherHdr->ether_dhost,
- EqualAddr);
- if (EqualAddr) {
- adapter->Stats.
- DumbRcvMcastPkts++;
- adapter->Stats.
- DumbRcvMcastBytes += length;
- return (TRUE);
- }
- mclist = mclist->next;
- }
- }
- }
- } else if (adapter->MacFilter & MAC_DIRECTED) {
- /*
- * Not broadcast or multicast. Must be directed at us or
- * the card is in promiscuous mode. Either way, consider it
- * ours if MAC_DIRECTED is set
- */
- adapter->Stats.DumbRcvUcastPkts++;
- adapter->Stats.DumbRcvUcastBytes += length;
- return (TRUE);
- }
- if (adapter->MacFilter & MAC_PROMISC) {
- /* Whatever it is, keep it. */
- return (TRUE);
- }
- return (FALSE);
-}
-
-static int sxg_register_interrupt(struct adapter_t *adapter)
-{
- if (!adapter->intrregistered) {
- int retval;
-
- DBG_ERROR
- ("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x] %x\n",
- __func__, adapter, adapter->netdev->irq, NR_IRQS);
-
- spin_unlock_irqrestore(&sxg_global.driver_lock,
- sxg_global.flags);
-
- retval = request_irq(adapter->netdev->irq,
- &sxg_isr,
- IRQF_SHARED,
- adapter->netdev->name, adapter->netdev);
-
- spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
-
- if (retval) {
- DBG_ERROR("sxg: request_irq (%s) FAILED [%x]\n",
- adapter->netdev->name, retval);
- return (retval);
- }
- adapter->intrregistered = 1;
- adapter->IntRegistered = TRUE;
- /* Disable RSS with line-based interrupts */
- adapter->RssEnabled = FALSE;
- DBG_ERROR("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x]\n",
- __func__, adapter, adapter->netdev->irq);
- }
- return (STATUS_SUCCESS);
-}
-
-static void sxg_deregister_interrupt(struct adapter_t *adapter)
-{
- DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __func__, adapter);
-#if XXXTODO
- slic_init_cleanup(adapter);
-#endif
- memset(&adapter->stats, 0, sizeof(struct net_device_stats));
- adapter->error_interrupts = 0;
- adapter->rcv_interrupts = 0;
- adapter->xmit_interrupts = 0;
- adapter->linkevent_interrupts = 0;
- adapter->upr_interrupts = 0;
- adapter->num_isrs = 0;
- adapter->xmit_completes = 0;
- adapter->rcv_broadcasts = 0;
- adapter->rcv_multicasts = 0;
- adapter->rcv_unicasts = 0;
- DBG_ERROR("sxg: %s EXIT\n", __func__);
-}
-
-/*
- * sxg_if_init
- *
- * Perform initialization of our slic interface.
- *
- */
-static int sxg_if_init(struct adapter_t *adapter)
-{
- struct net_device *dev = adapter->netdev;
- int status = 0;
-
- DBG_ERROR("sxg: %s (%s) ENTER states[%d:%d] flags[%x]\n",
- __func__, adapter->netdev->name,
- adapter->state,
- adapter->linkstate, dev->flags);
-
- /* adapter should be down at this point */
- if (adapter->state != ADAPT_DOWN) {
- DBG_ERROR("sxg_if_init adapter->state != ADAPT_DOWN\n");
- return (-EIO);
- }
- ASSERT(adapter->linkstate == LINK_DOWN);
-
- adapter->devflags_prev = dev->flags;
- adapter->MacFilter = MAC_DIRECTED;
- if (dev->flags) {
- DBG_ERROR("sxg: %s (%s) Set MAC options: ", __func__,
- adapter->netdev->name);
- if (dev->flags & IFF_BROADCAST) {
- adapter->MacFilter |= MAC_BCAST;
- DBG_ERROR("BCAST ");
- }
- if (dev->flags & IFF_PROMISC) {
- adapter->MacFilter |= MAC_PROMISC;
- DBG_ERROR("PROMISC ");
- }
- if (dev->flags & IFF_ALLMULTI) {
- adapter->MacFilter |= MAC_ALLMCAST;
- DBG_ERROR("ALL_MCAST ");
- }
- if (dev->flags & IFF_MULTICAST) {
- adapter->MacFilter |= MAC_MCAST;
- DBG_ERROR("MCAST ");
- }
- DBG_ERROR("\n");
- }
- status = sxg_register_intr(adapter);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("sxg_if_init: sxg_register_intr FAILED %x\n",
- status);
- sxg_deregister_interrupt(adapter);
- return (status);
- }
-
- adapter->state = ADAPT_UP;
-
- /* clear any pending events, then enable interrupts */
- DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __func__);
-
- return (STATUS_SUCCESS);
-}
-
-void sxg_set_interrupt_aggregation(struct adapter_t *adapter)
-{
- /*
- * Top bit disables aggregation on xmt (SXG_AGG_XMT_DISABLE).
- * Make sure Max is less than 0x8000.
- */
- adapter->max_aggregation = SXG_MAX_AGG_DEFAULT;
- adapter->min_aggregation = SXG_MIN_AGG_DEFAULT;
- WRITE_REG(adapter->UcodeRegs[0].Aggregation,
- ((adapter->max_aggregation << SXG_MAX_AGG_SHIFT) |
- adapter->min_aggregation),
- TRUE);
-}
-
-static int sxg_entry_open(struct net_device *dev)
-{
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
- int status;
- static int turn;
- int sxg_initial_rcv_data_buffers = SXG_INITIAL_RCV_DATA_BUFFERS;
- int i;
-
- if (adapter->JumboEnabled == TRUE) {
- sxg_initial_rcv_data_buffers =
- SXG_INITIAL_JUMBO_RCV_DATA_BUFFERS;
- SXG_INITIALIZE_RING(adapter->RcvRingZeroInfo,
- SXG_JUMBO_RCV_RING_SIZE);
- }
-
- /*
- * Allocate receive data buffers. We allocate a block of buffers and
- * a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK
- */
-
- for (i = 0; i < sxg_initial_rcv_data_buffers;
- i += SXG_RCV_DESCRIPTORS_PER_BLOCK)
- {
- status = sxg_allocate_buffer_memory(adapter,
- SXG_RCV_BLOCK_SIZE(SXG_RCV_DATA_HDR_SIZE),
- SXG_BUFFER_TYPE_RCV);
- if (status != STATUS_SUCCESS)
- return status;
- }
- /*
- * NBL resource allocation can fail in the 'AllocateComplete' routine,
- * which doesn't return status. Make sure we got the number of buffers
- * we requested
- */
-
- if (adapter->FreeRcvBufferCount < sxg_initial_rcv_data_buffers) {
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF6",
- adapter, adapter->FreeRcvBufferCount, SXG_MAX_ENTRIES,
- 0);
- return (STATUS_RESOURCES);
- }
- /*
- * The microcode expects it to be downloaded on every open.
- */
- DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __func__);
- if (sxg_download_microcode(adapter, SXG_UCODE_SYSTEM)) {
- DBG_ERROR("sxg: %s ENTER sxg_adapter_set_hwaddr\n",
- __func__);
- sxg_read_config(adapter);
- } else {
- adapter->state = ADAPT_FAIL;
- adapter->linkstate = LINK_DOWN;
- DBG_ERROR("sxg_download_microcode FAILED status[%x]\n",
- status);
- }
- msleep(5);
-
- if (turn) {
- sxg_second_open(adapter->netdev);
-
- return STATUS_SUCCESS;
- }
-
- turn++;
-
- ASSERT(adapter);
- DBG_ERROR("sxg: %s adapter->activated[%d]\n", __func__,
- adapter->activated);
- DBG_ERROR
- ("sxg: %s (%s): [jiffies[%lx] cpu %d] dev[%p] adapt[%p] port[%d]\n",
- __func__, adapter->netdev->name, jiffies, smp_processor_id(),
- adapter->netdev, adapter, adapter->port);
-
- netif_stop_queue(adapter->netdev);
-
- spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
- if (!adapter->activated) {
- sxg_global.num_sxg_ports_active++;
- adapter->activated = 1;
- }
- /* Initialize the adapter */
- DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __func__);
- status = sxg_initialize_adapter(adapter);
- DBG_ERROR("sxg: %s EXIT sxg_initialize_adapter status[%x]\n",
- __func__, status);
-
- if (status == STATUS_SUCCESS) {
- DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __func__);
- status = sxg_if_init(adapter);
- DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __func__,
- status);
- }
-
- if (status != STATUS_SUCCESS) {
- if (adapter->activated) {
- sxg_global.num_sxg_ports_active--;
- adapter->activated = 0;
- }
- spin_unlock_irqrestore(&sxg_global.driver_lock,
- sxg_global.flags);
- return (status);
- }
- DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __func__);
- sxg_set_interrupt_aggregation(adapter);
- napi_enable(&adapter->napi);
-
- /* Enable interrupts */
- SXG_ENABLE_ALL_INTERRUPTS(adapter);
-
- DBG_ERROR("sxg: %s EXIT\n", __func__);
-
- spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
- mod_timer(&adapter->watchdog_timer, jiffies);
-
- return STATUS_SUCCESS;
-}
-
-int sxg_second_open(struct net_device * dev)
-{
- struct adapter_t *adapter = (struct adapter_t*) netdev_priv(dev);
- int status = 0;
-
- spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
- netif_start_queue(adapter->netdev);
- adapter->state = ADAPT_UP;
- adapter->linkstate = LINK_UP;
-
- status = sxg_initialize_adapter(adapter);
- sxg_set_interrupt_aggregation(adapter);
- napi_enable(&adapter->napi);
- /* Re-enable interrupts */
- SXG_ENABLE_ALL_INTERRUPTS(adapter);
-
- sxg_register_intr(adapter);
- spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
- mod_timer(&adapter->watchdog_timer, jiffies);
- return (STATUS_SUCCESS);
-
-}
-
-static void __devexit sxg_entry_remove(struct pci_dev *pcidev)
-{
- u32 mmio_start = 0;
- u32 mmio_len = 0;
-
- struct net_device *dev = pci_get_drvdata(pcidev);
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
-
- flush_scheduled_work();
-
- /* Deallocate Resources */
- unregister_netdev(dev);
- sxg_reset_interrupt_capability(adapter);
- sxg_free_resources(adapter);
-
- ASSERT(adapter);
-
- mmio_start = pci_resource_start(pcidev, 0);
- mmio_len = pci_resource_len(pcidev, 0);
-
- DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __func__,
- mmio_start, mmio_len);
- release_mem_region(mmio_start, mmio_len);
-
- mmio_start = pci_resource_start(pcidev, 2);
- mmio_len = pci_resource_len(pcidev, 2);
-
- DBG_ERROR("sxg: %s rel_region(2) start[%x] len[%x]\n", __func__,
- mmio_start, mmio_len);
- release_mem_region(mmio_start, mmio_len);
-
- pci_disable_device(pcidev);
-
- DBG_ERROR("sxg: %s deallocate device\n", __func__);
- kfree(dev);
- DBG_ERROR("sxg: %s EXIT\n", __func__);
-}
-
-static int sxg_entry_halt(struct net_device *dev)
-{
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- int i;
- u32 RssIds, IsrCount;
- unsigned long flags;
-
- RssIds = SXG_RSS_CPU_COUNT(adapter);
- IsrCount = adapter->msi_enabled ? RssIds : 1;
- /* Disable interrupts */
- spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
- SXG_DISABLE_ALL_INTERRUPTS(adapter);
- adapter->state = ADAPT_DOWN;
- adapter->linkstate = LINK_DOWN;
-
- spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
- sxg_deregister_interrupt(adapter);
- WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH);
- mdelay(5000);
-
- del_timer_sync(&adapter->watchdog_timer);
- netif_stop_queue(dev);
- netif_carrier_off(dev);
-
- napi_disable(&adapter->napi);
-
- WRITE_REG(adapter->UcodeRegs[0].RcvCmd, 0, true);
- adapter->devflags_prev = 0;
- DBG_ERROR("sxg: %s (%s) set adapter[%p] state to ADAPT_DOWN(%d)\n",
- __func__, dev->name, adapter, adapter->state);
-
- spin_lock(&adapter->RcvQLock);
- /* Free all the blocks and the buffers, moved from remove() routine */
- if (!(IsListEmpty(&adapter->AllRcvBlocks))) {
- sxg_free_rcvblocks(adapter);
- }
-
-
- InitializeListHead(&adapter->FreeRcvBuffers);
- InitializeListHead(&adapter->FreeRcvBlocks);
- InitializeListHead(&adapter->AllRcvBlocks);
- InitializeListHead(&adapter->FreeSglBuffers);
- InitializeListHead(&adapter->AllSglBuffers);
-
- adapter->FreeRcvBufferCount = 0;
- adapter->FreeRcvBlockCount = 0;
- adapter->AllRcvBlockCount = 0;
- adapter->RcvBuffersOnCard = 0;
- adapter->PendingRcvCount = 0;
-
- memset(adapter->RcvRings, 0, sizeof(struct sxg_rcv_ring) * 1);
- memset(adapter->EventRings, 0, sizeof(struct sxg_event_ring) * RssIds);
- memset(adapter->Isr, 0, sizeof(u32) * IsrCount);
- for (i = 0; i < SXG_MAX_RING_SIZE; i++)
- adapter->RcvRingZeroInfo.Context[i] = NULL;
- SXG_INITIALIZE_RING(adapter->RcvRingZeroInfo, SXG_RCV_RING_SIZE);
- SXG_INITIALIZE_RING(adapter->XmtRingZeroInfo, SXG_XMT_RING_SIZE);
-
- spin_unlock(&adapter->RcvQLock);
-
- spin_lock_irqsave(&adapter->XmtZeroLock, flags);
- adapter->AllSglBufferCount = 0;
- adapter->FreeSglBufferCount = 0;
- adapter->PendingXmtCount = 0;
- memset(adapter->XmtRings, 0, sizeof(struct sxg_xmt_ring) * 1);
- memset(adapter->XmtRingZeroIndex, 0, sizeof(u32));
- spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
-
- for (i = 0; i < SXG_MAX_RSS; i++) {
- adapter->NextEvent[i] = 0;
- }
- atomic_set(&adapter->pending_allocations, 0);
- adapter->intrregistered = 0;
- sxg_remove_isr(adapter);
- DBG_ERROR("sxg: %s (%s) EXIT\n", __func__, dev->name);
- return (STATUS_SUCCESS);
-}
-
-static int sxg_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- ASSERT(rq);
-/* DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __func__, cmd, rq, dev);*/
- switch (cmd) {
- case SIOCSLICSETINTAGG:
- {
- /* struct adapter_t *adapter = (struct adapter_t *)
- * netdev_priv(dev);
- */
- u32 data[7];
- u32 intagg;
-
- if (copy_from_user(data, rq->ifr_data, 28)) {
- DBG_ERROR("copy_from_user FAILED getting \
- initial params\n");
- return -EFAULT;
- }
- intagg = data[0];
- printk(KERN_EMERG
- "%s: set interrupt aggregation to %d\n",
- __func__, intagg);
- return 0;
- }
-
- default:
- /* DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __func__, cmd); */
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-#define NORMAL_ETHFRAME 0
-
-/*
- * sxg_send_packets - Send a skb packet
- *
- * Arguments:
- * skb - The packet to send
- * dev - Our linux net device that refs our adapter
- *
- * Return:
- * 0 regardless of outcome XXXTODO refer to e1000 driver
- */
-static int sxg_send_packets(struct sk_buff *skb, struct net_device *dev)
-{
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
- u32 status = STATUS_SUCCESS;
-
- /*
- * DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __func__,
- * skb);
- */
-
- /* Check the adapter state */
- switch (adapter->State) {
- case SXG_STATE_INITIALIZING:
- case SXG_STATE_HALTED:
- case SXG_STATE_SHUTDOWN:
- ASSERT(0); /* unexpected */
- /* fall through */
- case SXG_STATE_RESETTING:
- case SXG_STATE_SLEEP:
- case SXG_STATE_BOOTDIAG:
- case SXG_STATE_DIAG:
- case SXG_STATE_HALTING:
- status = STATUS_FAILURE;
- break;
- case SXG_STATE_RUNNING:
- if (adapter->LinkState != SXG_LINK_UP) {
- status = STATUS_FAILURE;
- }
- break;
- default:
- ASSERT(0);
- status = STATUS_FAILURE;
- }
- if (status != STATUS_SUCCESS) {
- goto xmit_fail;
- }
- /* send a packet */
- status = sxg_transmit_packet(adapter, skb);
- if (status == STATUS_SUCCESS) {
- goto xmit_done;
- }
-
- xmit_fail:
- /* reject & complete all the packets if they cant be sent */
- if (status != STATUS_SUCCESS) {
-#if XXXTODO
- /* sxg_send_packets_fail(adapter, skb, status); */
-#else
- SXG_DROP_DUMB_SEND(adapter, skb);
- adapter->stats.tx_dropped++;
- return NETDEV_TX_BUSY;
-#endif
- }
- DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __func__,
- status);
-
- xmit_done:
- return NETDEV_TX_OK;
-}
-
-/*
- * sxg_transmit_packet
- *
- * This function transmits a single packet.
- *
- * Arguments -
- * adapter - Pointer to our adapter structure
- * skb - The packet to be sent
- *
- * Return - STATUS of send
- */
-static int sxg_transmit_packet(struct adapter_t *adapter, struct sk_buff *skb)
-{
- struct sxg_x64_sgl *pSgl;
- struct sxg_scatter_gather *SxgSgl;
- unsigned long sgl_flags;
- /* void *SglBuffer; */
- /* u32 SglBufferLength; */
-
- /*
- * The vast majority of work is done in the shared
- * sxg_dumb_sgl routine.
- */
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSend",
- adapter, skb, 0, 0);
-
- /* Allocate a SGL buffer */
- SXG_GET_SGL_BUFFER(adapter, SxgSgl, 0);
- if (!SxgSgl) {
- adapter->Stats.NoSglBuf++;
- adapter->stats.tx_errors++;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "SndPktF1",
- adapter, skb, 0, 0);
- return (STATUS_RESOURCES);
- }
- ASSERT(SxgSgl->adapter == adapter);
- /*SglBuffer = SXG_SGL_BUFFER(SxgSgl);
- SglBufferLength = SXG_SGL_BUF_SIZE; */
- SxgSgl->VlanTag.VlanTci = 0;
- SxgSgl->VlanTag.VlanTpid = 0;
- SxgSgl->Type = SXG_SGL_DUMB;
- SxgSgl->DumbPacket = skb;
- pSgl = NULL;
-
- /* Call the common sxg_dumb_sgl routine to complete the send. */
- return (sxg_dumb_sgl(pSgl, SxgSgl));
-}
-
-/*
- * sxg_dumb_sgl
- *
- * Arguments:
- * pSgl -
- * SxgSgl - struct sxg_scatter_gather
- *
- * Return Value:
- * Status of send operation.
- */
-static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
- struct sxg_scatter_gather *SxgSgl)
-{
- struct adapter_t *adapter = SxgSgl->adapter;
- struct sk_buff *skb = SxgSgl->DumbPacket;
- /* For now, all dumb-nic sends go on RSS queue zero */
- struct sxg_xmt_ring *XmtRing = &adapter->XmtRings[0];
- struct sxg_ring_info *XmtRingInfo = &adapter->XmtRingZeroInfo;
- struct sxg_cmd *XmtCmd = NULL;
- /* u32 Index = 0; */
- u32 DataLength = skb->len;
- /* unsigned int BufLen; */
- /* u32 SglOffset; */
- u64 phys_addr;
- unsigned long flags;
- unsigned long queue_id=0;
- int offload_cksum = 0;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
- pSgl, SxgSgl, 0, 0);
-
- /* Set aside a pointer to the sgl */
- SxgSgl->pSgl = pSgl;
-
- /* Sanity check that our SGL format is as we expect. */
- ASSERT(sizeof(struct sxg_x64_sge) == sizeof(struct sxg_x64_sge));
- /* Shouldn't be a vlan tag on this frame */
- ASSERT(SxgSgl->VlanTag.VlanTci == 0);
- ASSERT(SxgSgl->VlanTag.VlanTpid == 0);
-
- /*
- * From here below we work with the SGL placed in our
- * buffer.
- */
-
- SxgSgl->Sgl.NumberOfElements = 1;
- /*
- * Set ucode Queue ID based on bottom bits of destination TCP port.
- * This Queue ID splits slowpath/dumb-nic packet processing across
- * multiple threads on the card to improve performance. It is split
- * using the TCP port to avoid out-of-order packets that can result
- * from multithreaded processing. We use the destination port because
- * we expect to be run on a server, so in nearly all cases the local
- * port is likely to be constant (well-known server port) and the
- * remote port is likely to be random. The exception to this is iSCSI,
- * in which case we use the sport instead. Note
- * that original attempt at XOR'ing source and dest port resulted in
- * poor balance on NTTTCP/iometer applications since they tend to
- * line up (even-even, odd-odd..).
- */
-
- if (skb->protocol == htons(ETH_P_IP)) {
- struct iphdr *ip;
-
- ip = ip_hdr(skb);
- if (ip->protocol == IPPROTO_TCP)
- offload_cksum = 1;
- if (!offload_cksum || !tcp_hdr(skb))
- queue_id = 0;
- else if (offload_cksum && (DataLength >= sizeof(
- struct tcphdr))){
- queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
- (ntohs (tcp_hdr(skb)->source) &
- SXG_LARGE_SEND_QUEUE_MASK):
- (ntohs(tcp_hdr(skb)->dest) &
- SXG_LARGE_SEND_QUEUE_MASK));
- }
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
- if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
- offload_cksum = 1;
- if (!offload_cksum || !tcp_hdr(skb))
- queue_id = 0;
- else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
- queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
- (ntohs (tcp_hdr(skb)->source) &
- SXG_LARGE_SEND_QUEUE_MASK):
- (ntohs(tcp_hdr(skb)->dest) &
- SXG_LARGE_SEND_QUEUE_MASK));
- }
- }
-
- /* Grab the spinlock and acquire a command */
- spin_lock_irqsave(&adapter->XmtZeroLock, flags);
- SXG_GET_CMD(XmtRing, XmtRingInfo, XmtCmd, SxgSgl);
- if (XmtCmd == NULL) {
- /*
- * Call sxg_complete_slow_send to see if we can
- * free up any XmtRingZero entries and then try again
- */
-
- spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
- sxg_complete_slow_send(adapter);
- spin_lock_irqsave(&adapter->XmtZeroLock, flags);
- SXG_GET_CMD(XmtRing, XmtRingInfo, XmtCmd, SxgSgl);
- if (XmtCmd == NULL) {
- adapter->Stats.XmtZeroFull++;
- goto abortcmd;
- }
- }
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
- XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
- memset(XmtCmd, '\0', sizeof(*XmtCmd));
- XmtCmd->SgEntries = 1;
- XmtCmd->Flags = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- /*
- * We need to set the Checkum in IP header to 0. This is
- * required by hardware.
- */
- if (offload_cksum) {
- ip_hdr(skb)->check = 0x0;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
- /*
- * Dont know if length will require a change in
- * case of VLAN
- */
- XmtCmd->CsumFlags.MacLen = ETH_HLEN;
- XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
- SXG_NW_HDR_LEN_SHIFT;
- } else {
- if (skb_checksum_help(skb)){
- printk(KERN_EMERG "Dropped UDP packet for"
- " incorrect checksum calculation\n");
- if (XmtCmd)
- SXG_ABORT_CMD(XmtRingInfo);
- spin_unlock_irqrestore(&adapter->XmtZeroLock,
- flags);
- return STATUS_SUCCESS;
- }
- }
- }
-
- /*
- * Fill in the command
- * Copy out the first SGE to the command and adjust for offset
- */
- phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
-
- /*
- * SAHARA SGL WORKAROUND
- * See if the SGL straddles a 64k boundary. If so, skip to
- * the start of the next 64k boundary and continue
- */
-
- if ((adapter->asictype == SAHARA_REV_A) &&
- (SXG_INVALID_SGL(phys_addr,skb->data_len)))
- {
- spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
- if (XmtCmd)
- SXG_ABORT_CMD(XmtRingInfo);
- /* Silently drop this packet */
- printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
- return STATUS_SUCCESS;
- }
- XmtCmd->Buffer.FirstSgeAddress = phys_addr;
- XmtCmd->Buffer.FirstSgeLength = DataLength;
- XmtCmd->Buffer.SgeOffset = 0;
- XmtCmd->Buffer.TotalLength = DataLength;
-
- /*
- * Advance transmit cmd descripter by 1.
- * NOTE - See comments in SxgTcpOutput where we write
- * to the XmtCmd register regarding CPU ID values and/or
- * multiple commands.
- * Top 16 bits specify queue_id. See comments about queue_id above
- */
- /* Four queues at the moment */
- ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
- WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
- adapter->Stats.XmtQLen++; /* Stats within lock */
- /* Update stats */
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += DataLength;
-#if XXXTODO /* Stats stuff */
- if (SXG_MULTICAST_PACKET(EtherHdr)) {
- if (SXG_BROADCAST_PACKET(EtherHdr)) {
- adapter->Stats.DumbXmtBcastPkts++;
- adapter->Stats.DumbXmtBcastBytes += DataLength;
- } else {
- adapter->Stats.DumbXmtMcastPkts++;
- adapter->Stats.DumbXmtMcastBytes += DataLength;
- }
- } else {
- adapter->Stats.DumbXmtUcastPkts++;
- adapter->Stats.DumbXmtUcastBytes += DataLength;
- }
-#endif
-
- spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
- XmtCmd, pSgl, SxgSgl, 0);
- return STATUS_SUCCESS;
-
- abortcmd:
- /*
- * NOTE - Only jump to this label AFTER grabbing the
- * XmtZeroLock, and DO NOT DROP IT between the
- * command allocation and the following abort.
- */
- if (XmtCmd) {
- SXG_ABORT_CMD(XmtRingInfo);
- }
- spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
-
-/*
- * failsgl:
- * Jump to this label if failure occurs before the
- * XmtZeroLock is grabbed
- */
- adapter->stats.tx_errors++;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumSGFal",
- pSgl, SxgSgl, XmtRingInfo->Head, XmtRingInfo->Tail);
- /* SxgSgl->DumbPacket is the skb */
- // SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket);
-
- return STATUS_FAILURE;
-}
-
-/*
- * Link management functions
- *
- * sxg_initialize_link - Initialize the link stuff
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return
- * status
- */
-static int sxg_initialize_link(struct adapter_t *adapter)
-{
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- u32 Value;
- u32 ConfigData;
- u32 MaxFrame;
- u32 AxgMacReg1;
- int status;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitLink",
- adapter, 0, 0, 0);
-
- /* Reset PHY and XGXS module */
- WRITE_REG(HwRegs->LinkStatus, LS_SERDES_POWER_DOWN, TRUE);
-
- /* Reset transmit configuration register */
- WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_RESET, TRUE);
-
- /* Reset receive configuration register */
- WRITE_REG(HwRegs->RcvConfig, RCV_CONFIG_RESET, TRUE);
-
- /* Reset all MAC modules */
- WRITE_REG(HwRegs->MacConfig0, AXGMAC_CFG0_SUB_RESET, TRUE);
-
- /*
- * Link address 0
- * XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f)
- * is stored with the first nibble (0a) in the byte 0
- * of the Mac address. Possibly reverse?
- */
- Value = *(u32 *) adapter->macaddr;
- WRITE_REG(HwRegs->LinkAddress0Low, Value, TRUE);
- /* also write the MAC address to the MAC. Endian is reversed. */
- WRITE_REG(HwRegs->MacAddressLow, ntohl(Value), TRUE);
- Value = (*(u16 *) & adapter->macaddr[4] & 0x0000FFFF);
- WRITE_REG(HwRegs->LinkAddress0High, Value | LINK_ADDRESS_ENABLE, TRUE);
- /* endian swap for the MAC (put high bytes in bits [31:16], swapped) */
- Value = ntohl(Value);
- WRITE_REG(HwRegs->MacAddressHigh, Value, TRUE);
- /* Link address 1 */
- WRITE_REG(HwRegs->LinkAddress1Low, 0, TRUE);
- WRITE_REG(HwRegs->LinkAddress1High, 0, TRUE);
- /* Link address 2 */
- WRITE_REG(HwRegs->LinkAddress2Low, 0, TRUE);
- WRITE_REG(HwRegs->LinkAddress2High, 0, TRUE);
- /* Link address 3 */
- WRITE_REG(HwRegs->LinkAddress3Low, 0, TRUE);
- WRITE_REG(HwRegs->LinkAddress3High, 0, TRUE);
-
- /* Enable MAC modules */
- WRITE_REG(HwRegs->MacConfig0, 0, TRUE);
-
- /* Configure MAC */
- AxgMacReg1 = ( /* Enable XMT */
- AXGMAC_CFG1_XMT_EN |
- /* Enable receive */
- AXGMAC_CFG1_RCV_EN |
- /* short frame detection */
- AXGMAC_CFG1_SHORT_ASSERT |
- /* Verify frame length */
- AXGMAC_CFG1_CHECK_LEN |
- /* Generate FCS */
- AXGMAC_CFG1_GEN_FCS |
- /* Pad frames to 64 bytes */
- AXGMAC_CFG1_PAD_64);
-
- if (adapter->XmtFcEnabled) {
- AxgMacReg1 |= AXGMAC_CFG1_XMT_PAUSE; /* Allow sending of pause */
- }
- if (adapter->RcvFcEnabled) {
- AxgMacReg1 |= AXGMAC_CFG1_RCV_PAUSE; /* Enable detection of pause */
- }
-
- WRITE_REG(HwRegs->MacConfig1, AxgMacReg1, TRUE);
-
- /* Set AXGMAC max frame length if jumbo. Not needed for standard MTU */
- if (adapter->JumboEnabled) {
- WRITE_REG(HwRegs->MacMaxFrameLen, AXGMAC_MAXFRAME_JUMBO, TRUE);
- }
- /*
- * AMIIM Configuration Register -
- * The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion
- * (bottom bits) of this register is used to determine the MDC frequency
- * as specified in the A-XGMAC Design Document. This value must not be
- * zero. The following value (62 or 0x3E) is based on our MAC transmit
- * clock frequency (MTCLK) of 312.5 MHz. Given a maximum MDIO clock
- * frequency of 2.5 MHz (see the PHY spec), we get:
- * 312.5/(2*(X+1)) < 2.5 ==> X = 62.
- * This value happens to be the default value for this register, so we
- * really don't have to do this.
- */
- if (adapter->asictype == SAHARA_REV_B) {
- WRITE_REG(HwRegs->MacAmiimConfig, 0x0000001F, TRUE);
- } else {
- WRITE_REG(HwRegs->MacAmiimConfig, 0x0000003E, TRUE);
- }
-
- /* Power up and enable PHY and XAUI/XGXS/Serdes logic */
- WRITE_REG(HwRegs->LinkStatus,
- (LS_PHY_CLR_RESET |
- LS_XGXS_ENABLE |
- LS_XGXS_CTL |
- LS_PHY_CLK_EN |
- LS_ATTN_ALARM),
- TRUE);
- DBG_ERROR("After Power Up and enable PHY in sxg_initialize_link\n");
-
- /*
- * Per information given by Aeluros, wait 100 ms after removing reset.
- * It's not enough to wait for the self-clearing reset bit in reg 0 to
- * clear.
- */
- mdelay(100);
-
- /* Verify the PHY has come up by checking that the Reset bit has
- * cleared.
- */
- status = sxg_read_mdio_reg(adapter,
- MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */
- PHY_PMA_CONTROL1, /* PMA/PMD control register */
- &Value);
- DBG_ERROR("After sxg_read_mdio_reg Value[%x] fail=%x\n", Value,
- (Value & PMA_CONTROL1_RESET));
- if (status != STATUS_SUCCESS)
- return (STATUS_FAILURE);
- if (Value & PMA_CONTROL1_RESET) /* reset complete if bit is 0 */
- return (STATUS_FAILURE);
-
- /* The SERDES should be initialized by now - confirm */
- READ_REG(HwRegs->LinkStatus, Value);
- if (Value & LS_SERDES_DOWN) /* verify SERDES is initialized */
- return (STATUS_FAILURE);
-
- /* The XAUI link should also be up - confirm */
- if (!(Value & LS_XAUI_LINK_UP)) /* verify XAUI link is up */
- return (STATUS_FAILURE);
-
- /* Initialize the PHY */
- status = sxg_phy_init(adapter);
- if (status != STATUS_SUCCESS)
- return (STATUS_FAILURE);
-
- /* Enable the Link Alarm */
-
- /* MIIM_DEV_PHY_PMA - PHY PMA/PMD module
- * LASI_CONTROL - LASI control register
- * LASI_CTL_LS_ALARM_ENABLE - enable link alarm bit
- */
- status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA,
- LASI_CONTROL,
- LASI_CTL_LS_ALARM_ENABLE);
- if (status != STATUS_SUCCESS)
- return (STATUS_FAILURE);
-
- /* XXXTODO - temporary - verify bit is set */
-
- /* MIIM_DEV_PHY_PMA - PHY PMA/PMD module
- * LASI_CONTROL - LASI control register
- */
- status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,
- LASI_CONTROL,
- &Value);
-
- if (status != STATUS_SUCCESS)
- return (STATUS_FAILURE);
- if (!(Value & LASI_CTL_LS_ALARM_ENABLE)) {
- DBG_ERROR("Error! LASI Control Alarm Enable bit not set!\n");
- }
- /* Enable receive */
- MaxFrame = adapter->JumboEnabled ? JUMBOMAXFRAME : ETHERMAXFRAME;
- ConfigData = (RCV_CONFIG_ENABLE |
- RCV_CONFIG_ENPARSE |
- RCV_CONFIG_RCVBAD |
- RCV_CONFIG_RCVPAUSE |
- RCV_CONFIG_TZIPV6 |
- RCV_CONFIG_TZIPV4 |
- RCV_CONFIG_HASH_16 |
- RCV_CONFIG_SOCKET | RCV_CONFIG_BUFSIZE(MaxFrame));
-
- if (adapter->asictype == SAHARA_REV_B) {
- ConfigData |= (RCV_CONFIG_HIPRICTL |
- RCV_CONFIG_NEWSTATUSFMT);
- }
- WRITE_REG(HwRegs->RcvConfig, ConfigData, TRUE);
-
- WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_ENABLE, TRUE);
-
- /* Mark the link as down. We'll get a link event when it comes up. */
- sxg_link_state(adapter, SXG_LINK_DOWN);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XInitLnk",
- adapter, 0, 0, 0);
- return (STATUS_SUCCESS);
-}
-
-/*
- * sxg_phy_init - Initialize the PHY
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return
- * status
- */
-static int sxg_phy_init(struct adapter_t *adapter)
-{
- u32 Value;
- struct phy_ucode *p;
- int status;
-
- DBG_ERROR("ENTER %s\n", __func__);
-
- /* MIIM_DEV_PHY_PMA - PHY PMA/PMD module
- * 0xC205 - PHY ID register (?)
- * &Value - XXXTODO - add def
- */
- status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,
- 0xC205,
- &Value);
- if (status != STATUS_SUCCESS)
- return (STATUS_FAILURE);
-
- if (Value == 0x0012) {
- /* 0x0012 == AEL2005C PHY(?) - XXXTODO - add def */
- DBG_ERROR("AEL2005C PHY detected. Downloading PHY \
- microcode.\n");
-
- /* Initialize AEL2005C PHY and download PHY microcode */
- for (p = PhyUcode; p->Addr != 0xFFFF; p++) {
- if (p->Addr == 0) {
- /* if address == 0, data == sleep time in ms */
- mdelay(p->Data);
- } else {
- /* write the given data to the specified address */
- status = sxg_write_mdio_reg(adapter,
- MIIM_DEV_PHY_PMA,
- /* PHY address */
- p->Addr,
- /* PHY data */
- p->Data);
- if (status != STATUS_SUCCESS)
- return (STATUS_FAILURE);
- }
- }
- }
- DBG_ERROR("EXIT %s\n", __func__);
-
- return (STATUS_SUCCESS);
-}
-
-/*
- * sxg_link_event - Process a link event notification from the card
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return
- * None
- */
-static void sxg_link_event(struct adapter_t *adapter)
-{
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- struct net_device *netdev = adapter->netdev;
- enum SXG_LINK_STATE LinkState;
- int status;
- u32 Value;
-
- if (adapter->state == ADAPT_DOWN)
- return;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "LinkEvnt",
- adapter, 0, 0, 0);
- DBG_ERROR("ENTER %s\n", __func__);
-
- /* Check the Link Status register. We should have a Link Alarm. */
- READ_REG(HwRegs->LinkStatus, Value);
- if (Value & LS_LINK_ALARM) {
- /*
- * We got a Link Status alarm. First, pause to let the
- * link state settle (it can bounce a number of times)
- */
- mdelay(10);
-
- /* Now clear the alarm by reading the LASI status register. */
- /* MIIM_DEV_PHY_PMA - PHY PMA/PMD module */
- status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,
- /* LASI status register */
- LASI_STATUS,
- &Value);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("Error reading LASI Status MDIO register!\n");
- sxg_link_state(adapter, SXG_LINK_DOWN);
- /* ASSERT(0); */
- }
- /*
- * We used to assert that the LASI_LS_ALARM bit was set, as
- * it should be. But there appears to be cases during
- * initialization (when the PHY is reset and re-initialized)
- * when we get a link alarm, but the status bit is 0 when we
- * read it. Rather than trying to assure this never happens
- * (and nver being certain), just ignore it.
-
- * ASSERT(Value & LASI_STATUS_LS_ALARM);
- */
-
- /* Now get and set the link state */
- LinkState = sxg_get_link_state(adapter);
- sxg_link_state(adapter, LinkState);
- DBG_ERROR("SXG: Link Alarm occurred. Link is %s\n",
- ((LinkState == SXG_LINK_UP) ? "UP" : "DOWN"));
- if (LinkState == SXG_LINK_UP) {
- netif_carrier_on(netdev);
- netif_tx_start_all_queues(netdev);
- } else {
- netif_tx_stop_all_queues(netdev);
- netif_carrier_off(netdev);
- }
- } else {
- /*
- * XXXTODO - Assuming Link Attention is only being generated
- * for the Link Alarm pin (and not for a XAUI Link Status change)
- * , then it's impossible to get here. Yet we've gotten here
- * twice (under extreme conditions - bouncing the link up and
- * down many times a second). Needs further investigation.
- */
- DBG_ERROR("SXG: sxg_link_event: Can't get here!\n");
- DBG_ERROR("SXG: Link Status == 0x%08X.\n", Value);
- /* ASSERT(0); */
- }
- DBG_ERROR("EXIT %s\n", __func__);
-
-}
-
-/*
- * sxg_get_link_state - Determine if the link is up or down
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return
- * Link State
- */
-static enum SXG_LINK_STATE sxg_get_link_state(struct adapter_t *adapter)
-{
- int status;
- u32 Value;
-
- DBG_ERROR("ENTER %s\n", __func__);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "GetLink",
- adapter, 0, 0, 0);
-
- /*
- * Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if
- * the following 3 bits (from 3 different MDIO registers) are all true.
- */
-
- /* MIIM_DEV_PHY_PMA - PHY PMA/PMD module */
- status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,
- /* PMA/PMD Receive Signal Detect register */
- PHY_PMA_RCV_DET,
- &Value);
- if (status != STATUS_SUCCESS)
- goto bad;
-
- /* If PMA/PMD receive signal detect is 0, then the link is down */
- if (!(Value & PMA_RCV_DETECT))
- return (SXG_LINK_DOWN);
-
- /* MIIM_DEV_PHY_PCS - PHY PCS module */
- status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS,
- /* PCS 10GBASE-R Status 1 register */
- PHY_PCS_10G_STATUS1,
- &Value);
- if (status != STATUS_SUCCESS)
- goto bad;
-
- /* If PCS is not locked to receive blocks, then the link is down */
- if (!(Value & PCS_10B_BLOCK_LOCK))
- return (SXG_LINK_DOWN);
-
- status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS,/* PHY XS module */
- /* XS Lane Status register */
- PHY_XS_LANE_STATUS,
- &Value);
- if (status != STATUS_SUCCESS)
- goto bad;
-
- /* If XS transmit lanes are not aligned, then the link is down */
- if (!(Value & XS_LANE_ALIGN))
- return (SXG_LINK_DOWN);
-
- /* All 3 bits are true, so the link is up */
- DBG_ERROR("EXIT %s\n", __func__);
-
- return (SXG_LINK_UP);
-
- bad:
- /* An error occurred reading an MDIO register. This shouldn't happen. */
- DBG_ERROR("Error reading an MDIO register!\n");
- ASSERT(0);
- return (SXG_LINK_DOWN);
-}
-
-static void sxg_indicate_link_state(struct adapter_t *adapter,
- enum SXG_LINK_STATE LinkState)
-{
- if (adapter->LinkState == SXG_LINK_UP) {
- DBG_ERROR("%s: LINK now UP, call netif_start_queue\n",
- __func__);
- netif_start_queue(adapter->netdev);
- } else {
- DBG_ERROR("%s: LINK now DOWN, call netif_stop_queue\n",
- __func__);
- netif_stop_queue(adapter->netdev);
- }
-}
-
-/*
- * sxg_change_mtu - Change the Maximum Transfer Unit
- * * @returns 0 on success, negative on failure
- */
-int sxg_change_mtu (struct net_device *netdev, int new_mtu)
-{
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(netdev);
-
- if (!((new_mtu == SXG_DEFAULT_MTU) || (new_mtu == SXG_JUMBO_MTU)))
- return -EINVAL;
-
- if(new_mtu == netdev->mtu)
- return 0;
-
- netdev->mtu = new_mtu;
-
- if (new_mtu == SXG_JUMBO_MTU) {
- adapter->JumboEnabled = TRUE;
- adapter->FrameSize = JUMBOMAXFRAME;
- adapter->ReceiveBufferSize = SXG_RCV_JUMBO_BUFFER_SIZE;
- } else {
- adapter->JumboEnabled = FALSE;
- adapter->FrameSize = ETHERMAXFRAME;
- adapter->ReceiveBufferSize = SXG_RCV_DATA_BUFFER_SIZE;
- }
-
- sxg_entry_halt(netdev);
- sxg_entry_open(netdev);
- return 0;
-}
-
-/*
- * sxg_link_state - Set the link state and if necessary, indicate.
- * This routine the central point of processing for all link state changes.
- * Nothing else in the driver should alter the link state or perform
- * link state indications
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * LinkState - The link state
- *
- * Return
- * None
- */
-static void sxg_link_state(struct adapter_t *adapter,
- enum SXG_LINK_STATE LinkState)
-{
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "LnkINDCT",
- adapter, LinkState, adapter->LinkState, adapter->State);
-
- DBG_ERROR("ENTER %s\n", __func__);
-
- /*
- * Hold the adapter lock during this routine. Maybe move
- * the lock to the caller.
- */
- /* IMP TODO : Check if we can survive without taking this lock */
-// spin_lock(&adapter->AdapterLock);
- if (LinkState == adapter->LinkState) {
- /* Nothing changed.. */
-// spin_unlock(&adapter->AdapterLock);
- DBG_ERROR("EXIT #0 %s. Link status = %d\n",
- __func__, LinkState);
- return;
- }
- /* Save the adapter state */
- adapter->LinkState = LinkState;
-
- /* Drop the lock and indicate link state */
-// spin_unlock(&adapter->AdapterLock);
- DBG_ERROR("EXIT #1 %s\n", __func__);
-
- sxg_indicate_link_state(adapter, LinkState);
-}
-
-/*
- * sxg_write_mdio_reg - Write to a register on the MDIO bus
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * DevAddr - MDIO device number being addressed
- * RegAddr - register address for the specified MDIO device
- * Value - value to write to the MDIO register
- *
- * Return
- * status
- */
-static int sxg_write_mdio_reg(struct adapter_t *adapter,
- u32 DevAddr, u32 RegAddr, u32 Value)
-{
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- /* Address operation (written to MIIM field reg) */
- u32 AddrOp;
- /* Write operation (written to MIIM field reg) */
- u32 WriteOp;
- u32 Cmd;/* Command (written to MIIM command reg) */
- u32 ValueRead;
- u32 Timeout;
-
- /* DBG_ERROR("ENTER %s\n", __func__); */
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO",
- adapter, 0, 0, 0);
-
- /* Ensure values don't exceed field width */
- DevAddr &= 0x001F; /* 5-bit field */
- RegAddr &= 0xFFFF; /* 16-bit field */
- Value &= 0xFFFF; /* 16-bit field */
-
- /* Set MIIM field register bits for an MIIM address operation */
- AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
- (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
- (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
- (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr;
-
- /* Set MIIM field register bits for an MIIM write operation */
- WriteOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
- (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
- (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
- (MIIM_OP_WRITE << AXGMAC_AMIIM_FIELD_OP_SHIFT) | Value;
-
- /* Set MIIM command register bits to execute an MIIM command */
- Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION;
-
- /* Reset the command register command bit (in case it's not 0) */
- WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
-
- /* MIIM write to set the address of the specified MDIO register */
- WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE);
-
- /* Write to MIIM Command Register to execute to address operation */
- WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
-
- /* Poll AMIIM Indicator register to wait for completion */
- Timeout = SXG_LINK_TIMEOUT;
- do {
- udelay(100); /* Timeout in 100us units */
- READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
- if (--Timeout == 0) {
- return (STATUS_FAILURE);
- }
- } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
-
- /* Reset the command register command bit */
- WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
-
- /* MIIM write to set up an MDIO write operation */
- WRITE_REG(HwRegs->MacAmiimField, WriteOp, TRUE);
-
- /* Write to MIIM Command Register to execute the write operation */
- WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
-
- /* Poll AMIIM Indicator register to wait for completion */
- Timeout = SXG_LINK_TIMEOUT;
- do {
- udelay(100); /* Timeout in 100us units */
- READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
- if (--Timeout == 0) {
- return (STATUS_FAILURE);
- }
- } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
-
- /* DBG_ERROR("EXIT %s\n", __func__); */
-
- return (STATUS_SUCCESS);
-}
-
-/*
- * sxg_read_mdio_reg - Read a register on the MDIO bus
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * DevAddr - MDIO device number being addressed
- * RegAddr - register address for the specified MDIO device
- * pValue - pointer to where to put data read from the MDIO register
- *
- * Return
- * status
- */
-static int sxg_read_mdio_reg(struct adapter_t *adapter,
- u32 DevAddr, u32 RegAddr, u32 *pValue)
-{
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- u32 AddrOp; /* Address operation (written to MIIM field reg) */
- u32 ReadOp; /* Read operation (written to MIIM field reg) */
- u32 Cmd; /* Command (written to MIIM command reg) */
- u32 ValueRead;
- u32 Timeout;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO",
- adapter, 0, 0, 0);
- DBG_ERROR("ENTER %s\n", __func__);
-
- /* Ensure values don't exceed field width */
- DevAddr &= 0x001F; /* 5-bit field */
- RegAddr &= 0xFFFF; /* 16-bit field */
-
- /* Set MIIM field register bits for an MIIM address operation */
- AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
- (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
- (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
- (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr;
-
- /* Set MIIM field register bits for an MIIM read operation */
- ReadOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
- (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
- (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
- (MIIM_OP_READ << AXGMAC_AMIIM_FIELD_OP_SHIFT);
-
- /* Set MIIM command register bits to execute an MIIM command */
- Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION;
-
- /* Reset the command register command bit (in case it's not 0) */
- WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
-
- /* MIIM write to set the address of the specified MDIO register */
- WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE);
-
- /* Write to MIIM Command Register to execute to address operation */
- WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
-
- /* Poll AMIIM Indicator register to wait for completion */
- Timeout = SXG_LINK_TIMEOUT;
- do {
- udelay(100); /* Timeout in 100us units */
- READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
- if (--Timeout == 0) {
- DBG_ERROR("EXIT %s with STATUS_FAILURE 1\n", __func__);
-
- return (STATUS_FAILURE);
- }
- } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
-
- /* Reset the command register command bit */
- WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
-
- /* MIIM write to set up an MDIO register read operation */
- WRITE_REG(HwRegs->MacAmiimField, ReadOp, TRUE);
-
- /* Write to MIIM Command Register to execute the read operation */
- WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
-
- /* Poll AMIIM Indicator register to wait for completion */
- Timeout = SXG_LINK_TIMEOUT;
- do {
- udelay(100); /* Timeout in 100us units */
- READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
- if (--Timeout == 0) {
- DBG_ERROR("EXIT %s with STATUS_FAILURE 2\n", __func__);
-
- return (STATUS_FAILURE);
- }
- } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
-
- /* Read the MDIO register data back from the field register */
- READ_REG(HwRegs->MacAmiimField, *pValue);
- *pValue &= 0xFFFF; /* data is in the lower 16 bits */
-
- DBG_ERROR("EXIT %s\n", __func__);
-
- return (STATUS_SUCCESS);
-}
-
-/*
- * Functions to obtain the CRC corresponding to the destination mac address.
- * This is a standard ethernet CRC in that it is a 32-bit, reflected CRC using
- * the polynomial:
- * x^32 + x^26 + x^23 + x^22 + x^16 + x^12 + x^11 + x^10 + x^8 + x^7 + x^5
- * + x^4 + x^2 + x^1.
- *
- * After the CRC for the 6 bytes is generated (but before the value is
- * complemented), we must then transpose the value and return bits 30-23.
- */
-static u32 sxg_crc_table[256];/* Table of CRC's for all possible byte values */
-static u32 sxg_crc_init; /* Is table initialized */
-
-/* Contruct the CRC32 table */
-static void sxg_mcast_init_crc32(void)
-{
- u32 c; /* CRC shit reg */
- u32 e = 0; /* Poly X-or pattern */
- int i; /* counter */
- int k; /* byte being shifted into crc */
-
- static int p[] = { 0, 1, 2, 4, 5, 7, 8, 10, 11, 12, 16, 22, 23, 26 };
-
- for (i = 0; i < ARRAY_SIZE(p); i++) {
- e |= 1L << (31 - p[i]);
- }
-
- for (i = 1; i < 256; i++) {
- c = i;
- for (k = 8; k; k--) {
- c = c & 1 ? (c >> 1) ^ e : c >> 1;
- }
- sxg_crc_table[i] = c;
- }
-}
-
-/*
- * Return the MAC hast as described above.
- */
-static unsigned char sxg_mcast_get_mac_hash(char *macaddr)
-{
- u32 crc;
- char *p;
- int i;
- unsigned char machash = 0;
-
- if (!sxg_crc_init) {
- sxg_mcast_init_crc32();
- sxg_crc_init = 1;
- }
-
- crc = 0xFFFFFFFF; /* Preload shift register, per crc-32 spec */
- for (i = 0, p = macaddr; i < 6; ++p, ++i) {
- crc = (crc >> 8) ^ sxg_crc_table[(crc ^ *p) & 0xFF];
- }
-
- /* Return bits 1-8, transposed */
- for (i = 1; i < 9; i++) {
- machash |= (((crc >> i) & 1) << (8 - i));
- }
-
- return (machash);
-}
-
-static void sxg_mcast_set_mask(struct adapter_t *adapter)
-{
- struct sxg_ucode_regs *sxg_regs = adapter->UcodeRegs;
-
- DBG_ERROR("%s ENTER (%s) MacFilter[%x] mask[%llx]\n", __func__,
- adapter->netdev->name, (unsigned int)adapter->MacFilter,
- adapter->MulticastMask);
-
- if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) {
- /*
- * Turn on all multicast addresses. We have to do this for
- * promiscuous mode as well as ALLMCAST mode. It saves the
- * Microcode from having keep state about the MAC configuration
- */
- /* DBG_ERROR("sxg: %s MacFilter = MAC_ALLMCAST | MAC_PROMISC\n \
- * SLUT MODE!!!\n",__func__);
- */
- WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH);
- WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH);
- /* DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high \
- * 0xFFFFFFFF\n",__func__, adapter->netdev->name);
- */
-
- } else {
- /*
- * Commit our multicast mast to the SLIC by writing to the
- * multicast address mask registers
- */
- DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n",
- __func__, adapter->netdev->name,
- ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)),
- ((ulong)
- ((adapter->MulticastMask >> 32) & 0xFFFFFFFF)));
-
- WRITE_REG(sxg_regs->McastLow,
- (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH);
- WRITE_REG(sxg_regs->McastHigh,
- (u32) ((adapter->
- MulticastMask >> 32) & 0xFFFFFFFF), FLUSH);
- }
-}
-
-static void sxg_mcast_set_bit(struct adapter_t *adapter, char *address)
-{
- unsigned char crcpoly;
-
- /* Get the CRC polynomial for the mac address */
- crcpoly = sxg_mcast_get_mac_hash(address);
-
- /*
- * We only have space on the SLIC for 64 entries. Lop
- * off the top two bits. (2^6 = 64)
- */
- crcpoly &= 0x3F;
-
- /* OR in the new bit into our 64 bit mask. */
- adapter->MulticastMask |= (u64) 1 << crcpoly;
-}
-
-/*
- * Function takes MAC addresses from dev_mc_list and generates the Mask
- */
-
-static void sxg_set_mcast_addr(struct adapter_t *adapter)
-{
- struct dev_mc_list *mclist;
- struct net_device *dev = adapter->netdev;
- int i;
-
- if (adapter->MacFilter & (MAC_ALLMCAST | MAC_MCAST)) {
- for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
- i++, mclist = mclist->next) {
- sxg_mcast_set_bit(adapter,mclist->da_addr);
- }
- }
- sxg_mcast_set_mask(adapter);
-}
-
-static void sxg_mcast_set_list(struct net_device *dev)
-{
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
-
- ASSERT(adapter);
- if (dev->flags & IFF_PROMISC)
- adapter->MacFilter |= MAC_PROMISC;
- if (dev->flags & IFF_MULTICAST)
- adapter->MacFilter |= MAC_MCAST;
- if (dev->flags & IFF_ALLMULTI)
- adapter->MacFilter |= MAC_ALLMCAST;
-
- //XXX handle other flags as well
- sxg_set_mcast_addr(adapter);
-}
-
-void sxg_free_sgl_buffers(struct adapter_t *adapter)
-{
- struct list_entry *ple;
- struct sxg_scatter_gather *Sgl;
-
- while(!(IsListEmpty(&adapter->AllSglBuffers))) {
- ple = RemoveHeadList(&adapter->AllSglBuffers);
- Sgl = container_of(ple, struct sxg_scatter_gather, AllList);
- kfree(Sgl);
- adapter->AllSglBufferCount--;
- }
-}
-
-void sxg_free_rcvblocks(struct adapter_t *adapter)
-{
- u32 i;
- void *temp_RcvBlock;
- struct list_entry *ple;
- struct sxg_rcv_block_hdr *RcvBlockHdr;
- struct sxg_rcv_data_buffer_hdr *RcvDataBufferHdr;
- ASSERT((adapter->state == SXG_STATE_INITIALIZING) ||
- (adapter->state == SXG_STATE_HALTING));
- while(!(IsListEmpty(&adapter->AllRcvBlocks))) {
-
- ple = RemoveHeadList(&adapter->AllRcvBlocks);
- RcvBlockHdr = container_of(ple, struct sxg_rcv_block_hdr, AllList);
-
- if(RcvBlockHdr->VirtualAddress) {
- temp_RcvBlock = RcvBlockHdr->VirtualAddress;
-
- for(i=0; i< SXG_RCV_DESCRIPTORS_PER_BLOCK;
- i++, temp_RcvBlock += SXG_RCV_DATA_HDR_SIZE) {
- RcvDataBufferHdr =
- (struct sxg_rcv_data_buffer_hdr *)temp_RcvBlock;
- SXG_FREE_RCV_PACKET(RcvDataBufferHdr);
- }
- }
-
- pci_free_consistent(adapter->pcidev,
- SXG_RCV_BLOCK_SIZE(SXG_RCV_DATA_HDR_SIZE),
- RcvBlockHdr->VirtualAddress,
- RcvBlockHdr->PhysicalAddress);
- adapter->AllRcvBlockCount--;
- }
- ASSERT(adapter->AllRcvBlockCount == 0);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XFrRBlk",
- adapter, 0, 0, 0);
-}
-void sxg_free_mcast_addrs(struct adapter_t *adapter)
-{
- struct sxg_multicast_address *address;
- while(adapter->MulticastAddrs) {
- address = adapter->MulticastAddrs;
- adapter->MulticastAddrs = address->Next;
- kfree(address);
- }
-
- adapter->MulticastMask= 0;
-}
-
-void sxg_unmap_resources(struct adapter_t *adapter)
-{
- if(adapter->HwRegs) {
- iounmap((void *)adapter->HwRegs);
- }
- if(adapter->UcodeRegs) {
- iounmap((void *)adapter->UcodeRegs);
- }
-
- ASSERT(adapter->AllRcvBlockCount == 0);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XFrRBlk",
- adapter, 0, 0, 0);
-}
-
-
-
-/*
- * sxg_free_resources - Free everything allocated in SxgAllocateResources
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return
- * none
- */
-void sxg_free_resources(struct adapter_t *adapter)
-{
- u32 RssIds, IsrCount;
- RssIds = SXG_RSS_CPU_COUNT(adapter);
- IsrCount = adapter->msi_enabled ? RssIds : 1;
-
- if (adapter->BasicAllocations == FALSE) {
- /*
- * No allocations have been made, including spinlocks,
- * or listhead initializations. Return.
- */
- return;
- }
-
- if (!(IsListEmpty(&adapter->AllRcvBlocks))) {
- sxg_free_rcvblocks(adapter);
- }
- if (!(IsListEmpty(&adapter->AllSglBuffers))) {
- sxg_free_sgl_buffers(adapter);
- }
-
- if (adapter->XmtRingZeroIndex) {
- pci_free_consistent(adapter->pcidev,
- sizeof(u32),
- adapter->XmtRingZeroIndex,
- adapter->PXmtRingZeroIndex);
- }
- if (adapter->Isr) {
- pci_free_consistent(adapter->pcidev,
- sizeof(u32) * IsrCount,
- adapter->Isr, adapter->PIsr);
- }
-
- if (adapter->EventRings) {
- pci_free_consistent(adapter->pcidev,
- sizeof(struct sxg_event_ring) * RssIds,
- adapter->EventRings, adapter->PEventRings);
- }
- if (adapter->RcvRings) {
- pci_free_consistent(adapter->pcidev,
- sizeof(struct sxg_rcv_ring) * 1,
- adapter->RcvRings,
- adapter->PRcvRings);
- adapter->RcvRings = NULL;
- }
-
- if(adapter->XmtRings) {
- pci_free_consistent(adapter->pcidev,
- sizeof(struct sxg_xmt_ring) * 1,
- adapter->XmtRings,
- adapter->PXmtRings);
- adapter->XmtRings = NULL;
- }
-
- if (adapter->ucode_stats) {
- pci_unmap_single(adapter->pcidev,
- sizeof(struct sxg_ucode_stats),
- adapter->pucode_stats, PCI_DMA_FROMDEVICE);
- adapter->ucode_stats = NULL;
- }
-
-
- /* Unmap register spaces */
- sxg_unmap_resources(adapter);
-
- sxg_free_mcast_addrs(adapter);
-
- adapter->BasicAllocations = FALSE;
-
-}
-
-/*
- * sxg_allocate_complete -
- *
- * This routine is called when a memory allocation has completed.
- *
- * Arguments -
- * struct adapter_t * - Our adapter structure
- * VirtualAddress - Memory virtual address
- * PhysicalAddress - Memory physical address
- * Length - Length of memory allocated (or 0)
- * Context - The type of buffer allocated
- *
- * Return
- * None.
- */
-static int sxg_allocate_complete(struct adapter_t *adapter,
- void *VirtualAddress,
- dma_addr_t PhysicalAddress,
- u32 Length, enum sxg_buffer_type Context)
-{
- int status = 0;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocCmp",
- adapter, VirtualAddress, Length, Context);
- ASSERT(atomic_read(&adapter->pending_allocations));
- atomic_dec(&adapter->pending_allocations);
-
- switch (Context) {
-
- case SXG_BUFFER_TYPE_RCV:
- status = sxg_allocate_rcvblock_complete(adapter,
- VirtualAddress,
- PhysicalAddress, Length);
- break;
- case SXG_BUFFER_TYPE_SGL:
- sxg_allocate_sgl_buffer_complete(adapter, (struct sxg_scatter_gather *)
- VirtualAddress,
- PhysicalAddress, Length);
- break;
- }
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlocCmp",
- adapter, VirtualAddress, Length, Context);
-
- return status;
-}
-
-/*
- * sxg_allocate_buffer_memory - Shared memory allocation routine used for
- * synchronous and asynchronous buffer allocations
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * Size - block size to allocate
- * BufferType - Type of buffer to allocate
- *
- * Return
- * int
- */
-static int sxg_allocate_buffer_memory(struct adapter_t *adapter,
- u32 Size, enum sxg_buffer_type BufferType)
-{
- int status;
- void *Buffer;
- dma_addr_t pBuffer;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocMem",
- adapter, Size, BufferType, 0);
- /*
- * Grab the adapter lock and check the state. If we're in anything other
- * than INITIALIZING or RUNNING state, fail. This is to prevent
- * allocations in an improper driver state
- */
-
- atomic_inc(&adapter->pending_allocations);
-
- if(BufferType != SXG_BUFFER_TYPE_SGL)
- Buffer = pci_alloc_consistent(adapter->pcidev, Size, &pBuffer);
- else {
- Buffer = kzalloc(Size, GFP_ATOMIC);
- pBuffer = (dma_addr_t)NULL;
- }
- if (Buffer == NULL) {
- /*
- * Decrement the AllocationsPending count while holding
- * the lock. Pause processing relies on this
- */
- atomic_dec(&adapter->pending_allocations);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlcMemF1",
- adapter, Size, BufferType, 0);
- return (STATUS_RESOURCES);
- }
- status = sxg_allocate_complete(adapter, Buffer, pBuffer, Size, BufferType);
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlocMem",
- adapter, Size, BufferType, status);
- return status;
-}
-
-/*
- * sxg_allocate_rcvblock_complete - Complete a receive descriptor
- * block allocation
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * RcvBlock - receive block virtual address
- * PhysicalAddress - Physical address
- * Length - Memory length
- *
- * Return
- */
-static int sxg_allocate_rcvblock_complete(struct adapter_t *adapter,
- void *RcvBlock,
- dma_addr_t PhysicalAddress,
- u32 Length)
-{
- u32 i;
- u32 BufferSize = adapter->ReceiveBufferSize;
- u64 Paddr;
- void *temp_RcvBlock;
- struct sxg_rcv_block_hdr *RcvBlockHdr;
- struct sxg_rcv_data_buffer_hdr *RcvDataBufferHdr;
- struct sxg_rcv_descriptor_block *RcvDescriptorBlock;
- struct sxg_rcv_descriptor_block_hdr *RcvDescriptorBlockHdr;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlRcvBlk",
- adapter, RcvBlock, Length, 0);
- if (RcvBlock == NULL) {
- goto fail;
- }
- memset(RcvBlock, 0, Length);
- ASSERT((BufferSize == SXG_RCV_DATA_BUFFER_SIZE) ||
- (BufferSize == SXG_RCV_JUMBO_BUFFER_SIZE));
- ASSERT(Length == SXG_RCV_BLOCK_SIZE(SXG_RCV_DATA_HDR_SIZE));
- /*
- * First, initialize the contained pool of receive data buffers.
- * This initialization requires NBL/NB/MDL allocations, if any of them
- * fail, free the block and return without queueing the shared memory
- */
- //RcvDataBuffer = RcvBlock;
- temp_RcvBlock = RcvBlock;
- for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK;
- i++, temp_RcvBlock += SXG_RCV_DATA_HDR_SIZE) {
- RcvDataBufferHdr = (struct sxg_rcv_data_buffer_hdr *)
- temp_RcvBlock;
- /* For FREE macro assertion */
- RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM;
- SXG_ALLOCATE_RCV_PACKET(adapter, RcvDataBufferHdr, BufferSize);
- if (RcvDataBufferHdr->SxgDumbRcvPacket == NULL)
- goto fail;
-
- }
-
- /*
- * Place this entire block of memory on the AllRcvBlocks queue so it
- * can be free later
- */
-
- RcvBlockHdr = (struct sxg_rcv_block_hdr *) ((unsigned char *)RcvBlock +
- SXG_RCV_BLOCK_HDR_OFFSET(SXG_RCV_DATA_HDR_SIZE));
- RcvBlockHdr->VirtualAddress = RcvBlock;
- RcvBlockHdr->PhysicalAddress = PhysicalAddress;
- spin_lock(&adapter->RcvQLock);
- adapter->AllRcvBlockCount++;
- InsertTailList(&adapter->AllRcvBlocks, &RcvBlockHdr->AllList);
- spin_unlock(&adapter->RcvQLock);
-
- /* Now free the contained receive data buffers that we
- * initialized above */
- temp_RcvBlock = RcvBlock;
- for (i = 0, Paddr = PhysicalAddress;
- i < SXG_RCV_DESCRIPTORS_PER_BLOCK;
- i++, Paddr += SXG_RCV_DATA_HDR_SIZE,
- temp_RcvBlock += SXG_RCV_DATA_HDR_SIZE) {
- RcvDataBufferHdr =
- (struct sxg_rcv_data_buffer_hdr *)temp_RcvBlock;
- spin_lock(&adapter->RcvQLock);
- SXG_FREE_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr);
- spin_unlock(&adapter->RcvQLock);
- }
-
- /* Locate the descriptor block and put it on a separate free queue */
- RcvDescriptorBlock =
- (struct sxg_rcv_descriptor_block *) ((unsigned char *)RcvBlock +
- SXG_RCV_DESCRIPTOR_BLOCK_OFFSET
- (SXG_RCV_DATA_HDR_SIZE));
- RcvDescriptorBlockHdr =
- (struct sxg_rcv_descriptor_block_hdr *) ((unsigned char *)RcvBlock +
- SXG_RCV_DESCRIPTOR_BLOCK_HDR_OFFSET
- (SXG_RCV_DATA_HDR_SIZE));
- RcvDescriptorBlockHdr->VirtualAddress = RcvDescriptorBlock;
- RcvDescriptorBlockHdr->PhysicalAddress = Paddr;
- spin_lock(&adapter->RcvQLock);
- SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter, RcvDescriptorBlockHdr);
- spin_unlock(&adapter->RcvQLock);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlRBlk",
- adapter, RcvBlock, Length, 0);
- return STATUS_SUCCESS;
-fail:
- /* Free any allocated resources */
- if (RcvBlock) {
- temp_RcvBlock = RcvBlock;
- for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK;
- i++, temp_RcvBlock += SXG_RCV_DATA_HDR_SIZE) {
- RcvDataBufferHdr =
- (struct sxg_rcv_data_buffer_hdr *)temp_RcvBlock;
- SXG_FREE_RCV_PACKET(RcvDataBufferHdr);
- }
- pci_free_consistent(adapter->pcidev,
- Length, RcvBlock, PhysicalAddress);
- }
- DBG_ERROR("%s: OUT OF RESOURCES\n", __func__);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "RcvAFail",
- adapter, adapter->FreeRcvBufferCount,
- adapter->FreeRcvBlockCount, adapter->AllRcvBlockCount);
- adapter->Stats.NoMem++;
- /* As allocation failed, free all previously allocated blocks..*/
- //sxg_free_rcvblocks(adapter);
-
- return STATUS_RESOURCES;
-}
-
-/*
- * sxg_allocate_sgl_buffer_complete - Complete a SGL buffer allocation
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * SxgSgl - struct sxg_scatter_gather buffer
- * PhysicalAddress - Physical address
- * Length - Memory length
- *
- * Return
- */
-static void sxg_allocate_sgl_buffer_complete(struct adapter_t *adapter,
- struct sxg_scatter_gather *SxgSgl,
- dma_addr_t PhysicalAddress,
- u32 Length)
-{
- unsigned long sgl_flags;
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlSglCmp",
- adapter, SxgSgl, Length, 0);
- spin_lock_irqsave(&adapter->SglQLock, sgl_flags);
- adapter->AllSglBufferCount++;
- /* PhysicalAddress; */
- SxgSgl->PhysicalAddress = PhysicalAddress;
- /* Initialize backpointer once */
- SxgSgl->adapter = adapter;
- InsertTailList(&adapter->AllSglBuffers, &SxgSgl->AllList);
- spin_unlock_irqrestore(&adapter->SglQLock, sgl_flags);
- SxgSgl->State = SXG_BUFFER_BUSY;
- SXG_FREE_SGL_BUFFER(adapter, SxgSgl, NULL);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlSgl",
- adapter, SxgSgl, Length, 0);
-}
-
-
-static int sxg_adapter_set_hwaddr(struct adapter_t *adapter)
-{
- /*
- * DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] \
- * funct#[%d]\n", __func__, card->config_set,
- * adapter->port, adapter->physport, adapter->functionnumber);
- *
- * sxg_dbg_macaddrs(adapter);
- */
- /* DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n",
- * __func__);
- */
-
- /* sxg_dbg_macaddrs(adapter); */
-
- struct net_device * dev = adapter->netdev;
- if(!dev)
- {
- printk("sxg: Dev is Null\n");
- }
-
- DBG_ERROR("%s ENTER (%s)\n", __func__, adapter->netdev->name);
-
- if (netif_running(dev)) {
- return -EBUSY;
- }
- if (!adapter) {
- return -EBUSY;
- }
-
- if (!(adapter->currmacaddr[0] ||
- adapter->currmacaddr[1] ||
- adapter->currmacaddr[2] ||
- adapter->currmacaddr[3] ||
- adapter->currmacaddr[4] || adapter->currmacaddr[5])) {
- memcpy(adapter->currmacaddr, adapter->macaddr, 6);
- }
- if (adapter->netdev) {
- memcpy(adapter->netdev->dev_addr, adapter->currmacaddr, 6);
- memcpy(adapter->netdev->perm_addr, adapter->currmacaddr, 6);
- }
- /* DBG_ERROR ("%s EXIT port %d\n", __func__, adapter->port); */
- sxg_dbg_macaddrs(adapter);
-
- return 0;
-}
-
-#if XXXTODO
-static int sxg_mac_set_address(struct net_device *dev, void *ptr)
-{
- struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev);
- struct sockaddr *addr = ptr;
-
- DBG_ERROR("%s ENTER (%s)\n", __func__, adapter->netdev->name);
-
- if (netif_running(dev)) {
- return -EBUSY;
- }
- if (!adapter) {
- return -EBUSY;
- }
- DBG_ERROR("sxg: %s (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- __func__, adapter->netdev->name, adapter->currmacaddr[0],
- adapter->currmacaddr[1], adapter->currmacaddr[2],
- adapter->currmacaddr[3], adapter->currmacaddr[4],
- adapter->currmacaddr[5]);
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
- DBG_ERROR("sxg: %s (%s) new %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- __func__, adapter->netdev->name, adapter->currmacaddr[0],
- adapter->currmacaddr[1], adapter->currmacaddr[2],
- adapter->currmacaddr[3], adapter->currmacaddr[4],
- adapter->currmacaddr[5]);
-
- sxg_config_set(adapter, TRUE);
- return 0;
-}
-#endif
-
-/*
- * SXG DRIVER FUNCTIONS (below)
- *
- * sxg_initialize_adapter - Initialize adapter
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return - int
- */
-static int sxg_initialize_adapter(struct adapter_t *adapter)
-{
- u32 RssIds, IsrCount;
- u32 i;
- int status;
- int sxg_rcv_ring_size = SXG_RCV_RING_SIZE;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitAdpt",
- adapter, 0, 0, 0);
-
- RssIds = 1; /* XXXTODO SXG_RSS_CPU_COUNT(adapter); */
- IsrCount = adapter->msi_enabled ? RssIds : 1;
-
- /*
- * Sanity check SXG_UCODE_REGS structure definition to
- * make sure the length is correct
- */
- ASSERT(sizeof(struct sxg_ucode_regs) == SXG_REGISTER_SIZE_PER_CPU);
-
- /* Disable interrupts */
- SXG_DISABLE_ALL_INTERRUPTS(adapter);
-
- /* Set MTU */
- ASSERT((adapter->FrameSize == ETHERMAXFRAME) ||
- (adapter->FrameSize == JUMBOMAXFRAME));
- WRITE_REG(adapter->UcodeRegs[0].LinkMtu, adapter->FrameSize, TRUE);
-
- /* Set event ring base address and size */
- WRITE_REG64(adapter,
- adapter->UcodeRegs[0].EventBase, adapter->PEventRings, 0);
- WRITE_REG(adapter->UcodeRegs[0].EventSize, EVENT_RING_SIZE, TRUE);
-
- /* Per-ISR initialization */
- for (i = 0; i < IsrCount; i++) {
- u64 Addr;
- /* Set interrupt status pointer */
- Addr = adapter->PIsr + (i * sizeof(u32));
- WRITE_REG64(adapter, adapter->UcodeRegs[i].Isp, Addr, i);
- }
-
- /* XMT ring zero index */
- WRITE_REG64(adapter,
- adapter->UcodeRegs[0].SPSendIndex,
- adapter->PXmtRingZeroIndex, 0);
-
- /* Per-RSS initialization */
- for (i = 0; i < RssIds; i++) {
- /* Release all event ring entries to the Microcode */
- WRITE_REG(adapter->UcodeRegs[i].EventRelease, EVENT_RING_SIZE,
- TRUE);
- }
-
- /* Transmit ring base and size */
- WRITE_REG64(adapter,
- adapter->UcodeRegs[0].XmtBase, adapter->PXmtRings, 0);
- WRITE_REG(adapter->UcodeRegs[0].XmtSize, SXG_XMT_RING_SIZE, TRUE);
-
- /* Receive ring base and size */
- WRITE_REG64(adapter,
- adapter->UcodeRegs[0].RcvBase, adapter->PRcvRings, 0);
- if (adapter->JumboEnabled == TRUE)
- sxg_rcv_ring_size = SXG_JUMBO_RCV_RING_SIZE;
- WRITE_REG(adapter->UcodeRegs[0].RcvSize, sxg_rcv_ring_size, TRUE);
-
- /* Populate the card with receive buffers */
- sxg_stock_rcv_buffers(adapter);
-
- /*
- * Initialize checksum offload capabilities. At the moment we always
- * enable IP and TCP receive checksums on the card. Depending on the
- * checksum configuration specified by the user, we can choose to
- * report or ignore the checksum information provided by the card.
- */
- WRITE_REG(adapter->UcodeRegs[0].ReceiveChecksum,
- SXG_RCV_TCP_CSUM_ENABLED | SXG_RCV_IP_CSUM_ENABLED, TRUE);
-
- adapter->flags |= (SXG_RCV_TCP_CSUM_ENABLED | SXG_RCV_IP_CSUM_ENABLED );
-
- /* Initialize the MAC, XAUI */
- DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __func__);
- status = sxg_initialize_link(adapter);
- DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __func__,
- status);
- if (status != STATUS_SUCCESS) {
- return (status);
- }
- /*
- * Initialize Dead to FALSE.
- * SlicCheckForHang or SlicDumpThread will take it from here.
- */
- adapter->Dead = FALSE;
- adapter->PingOutstanding = FALSE;
- adapter->XmtFcEnabled = TRUE;
- adapter->RcvFcEnabled = TRUE;
-
- adapter->State = SXG_STATE_RUNNING;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XInit",
- adapter, 0, 0, 0);
- return (STATUS_SUCCESS);
-}
-
-/*
- * sxg_fill_descriptor_block - Populate a descriptor block and give it to
- * the card. The caller should hold the RcvQLock
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * RcvDescriptorBlockHdr - Descriptor block to fill
- *
- * Return
- * status
- */
-static int sxg_fill_descriptor_block(struct adapter_t *adapter,
- struct sxg_rcv_descriptor_block_hdr *RcvDescriptorBlockHdr)
-{
- u32 i;
- struct sxg_ring_info *RcvRingInfo = &adapter->RcvRingZeroInfo;
- struct sxg_rcv_data_buffer_hdr *RcvDataBufferHdr;
- struct sxg_rcv_descriptor_block *RcvDescriptorBlock;
- struct sxg_cmd *RingDescriptorCmd;
- struct sxg_rcv_ring *RingZero = &adapter->RcvRings[0];
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "FilBlk",
- adapter, adapter->RcvBuffersOnCard,
- adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount);
-
- ASSERT(RcvDescriptorBlockHdr);
-
- /*
- * If we don't have the resources to fill the descriptor block,
- * return failure
- */
- if ((adapter->FreeRcvBufferCount < SXG_RCV_DESCRIPTORS_PER_BLOCK) ||
- SXG_RING_FULL(RcvRingInfo)) {
- adapter->Stats.NoMem++;
- return (STATUS_FAILURE);
- }
- /* Get a ring descriptor command */
- SXG_GET_CMD(RingZero,
- RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr);
- ASSERT(RingDescriptorCmd);
- RcvDescriptorBlockHdr->State = SXG_BUFFER_ONCARD;
- RcvDescriptorBlock = (struct sxg_rcv_descriptor_block *)
- RcvDescriptorBlockHdr->VirtualAddress;
-
- /* Fill in the descriptor block */
- for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++) {
- SXG_GET_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr);
- ASSERT(RcvDataBufferHdr);
-// ASSERT(RcvDataBufferHdr->SxgDumbRcvPacket);
- if (!RcvDataBufferHdr->SxgDumbRcvPacket) {
- SXG_ALLOCATE_RCV_PACKET(adapter, RcvDataBufferHdr,
- adapter->ReceiveBufferSize);
- if(RcvDataBufferHdr->skb)
- RcvDataBufferHdr->SxgDumbRcvPacket =
- RcvDataBufferHdr->skb;
- else
- goto no_memory;
- }
- SXG_REINIATIALIZE_PACKET(RcvDataBufferHdr->SxgDumbRcvPacket);
- RcvDataBufferHdr->State = SXG_BUFFER_ONCARD;
- RcvDescriptorBlock->Descriptors[i].VirtualAddress =
- (void *)RcvDataBufferHdr;
-
- RcvDescriptorBlock->Descriptors[i].PhysicalAddress =
- RcvDataBufferHdr->PhysicalAddress;
- }
- /* Add the descriptor block to receive descriptor ring 0 */
- RingDescriptorCmd->Sgl = RcvDescriptorBlockHdr->PhysicalAddress;
-
- /*
- * RcvBuffersOnCard is not protected via the receive lock (see
- * sxg_process_event_queue) We don't want to grap a lock every time a
- * buffer is returned to us, so we use atomic interlocked functions
- * instead.
- */
- adapter->RcvBuffersOnCard += SXG_RCV_DESCRIPTORS_PER_BLOCK;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DscBlk",
- RcvDescriptorBlockHdr,
- RingDescriptorCmd, RcvRingInfo->Head, RcvRingInfo->Tail);
-
- WRITE_REG(adapter->UcodeRegs[0].RcvCmd, 1, true);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XFilBlk",
- adapter, adapter->RcvBuffersOnCard,
- adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount);
- return (STATUS_SUCCESS);
-no_memory:
- for (; i >= 0 ; i--) {
- if (RcvDescriptorBlock->Descriptors[i].VirtualAddress) {
- RcvDataBufferHdr = (struct sxg_rcv_data_buffer_hdr *)
- RcvDescriptorBlock->Descriptors[i].
- VirtualAddress;
- RcvDescriptorBlock->Descriptors[i].PhysicalAddress =
- (dma_addr_t)NULL;
- RcvDescriptorBlock->Descriptors[i].VirtualAddress=NULL;
- }
- SXG_FREE_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr);
- }
- RcvDescriptorBlockHdr->State = SXG_BUFFER_FREE;
- SXG_RETURN_CMD(RingZero, RcvRingInfo, RingDescriptorCmd,
- RcvDescriptorBlockHdr);
-
- return (-ENOMEM);
-}
-
-/*
- * sxg_stock_rcv_buffers - Stock the card with receive buffers
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- *
- * Return
- * None
- */
-static void sxg_stock_rcv_buffers(struct adapter_t *adapter)
-{
- struct sxg_rcv_descriptor_block_hdr *RcvDescriptorBlockHdr;
- int sxg_rcv_data_buffers = SXG_RCV_DATA_BUFFERS;
- int sxg_min_rcv_data_buffers = SXG_MIN_RCV_DATA_BUFFERS;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "StockBuf",
- adapter, adapter->RcvBuffersOnCard,
- adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount);
- /*
- * First, see if we've got less than our minimum threshold of
- * receive buffers, there isn't an allocation in progress, and
- * we haven't exceeded our maximum.. get another block of buffers
- * None of this needs to be SMP safe. It's round numbers.
- */
- if (adapter->JumboEnabled == TRUE)
- sxg_min_rcv_data_buffers = SXG_MIN_JUMBO_RCV_DATA_BUFFERS;
- if ((adapter->FreeRcvBufferCount < sxg_min_rcv_data_buffers) &&
- (adapter->AllRcvBlockCount < SXG_MAX_RCV_BLOCKS) &&
- (atomic_read(&adapter->pending_allocations) == 0)) {
- sxg_allocate_buffer_memory(adapter,
- SXG_RCV_BLOCK_SIZE
- (SXG_RCV_DATA_HDR_SIZE),
- SXG_BUFFER_TYPE_RCV);
- }
- /* Now grab the RcvQLock lock and proceed */
- spin_lock(&adapter->RcvQLock);
- if (adapter->JumboEnabled)
- sxg_rcv_data_buffers = SXG_JUMBO_RCV_DATA_BUFFERS;
- while (adapter->RcvBuffersOnCard < sxg_rcv_data_buffers) {
- struct list_entry *_ple;
-
- /* Get a descriptor block */
- RcvDescriptorBlockHdr = NULL;
- if (adapter->FreeRcvBlockCount) {
- _ple = RemoveHeadList(&adapter->FreeRcvBlocks);
- RcvDescriptorBlockHdr =
- container_of(_ple, struct sxg_rcv_descriptor_block_hdr,
- FreeList);
- adapter->FreeRcvBlockCount--;
- RcvDescriptorBlockHdr->State = SXG_BUFFER_BUSY;
- }
-
- if (RcvDescriptorBlockHdr == NULL) {
- /* Bail out.. */
- adapter->Stats.NoMem++;
- break;
- }
- /* Fill in the descriptor block and give it to the card */
- if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) ==
- STATUS_FAILURE) {
- /* Free the descriptor block */
- SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter,
- RcvDescriptorBlockHdr);
- break;
- }
- }
- spin_unlock(&adapter->RcvQLock);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XFilBlks",
- adapter, adapter->RcvBuffersOnCard,
- adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount);
-}
-
-/*
- * sxg_complete_descriptor_blocks - Return descriptor blocks that have been
- * completed by the microcode
- *
- * Arguments -
- * adapter - A pointer to our adapter structure
- * Index - Where the microcode is up to
- *
- * Return
- * None
- */
-static void sxg_complete_descriptor_blocks(struct adapter_t *adapter,
- unsigned char Index)
-{
- struct sxg_rcv_ring *RingZero = &adapter->RcvRings[0];
- struct sxg_ring_info *RcvRingInfo = &adapter->RcvRingZeroInfo;
- struct sxg_rcv_descriptor_block_hdr *RcvDescriptorBlockHdr;
- struct sxg_cmd *RingDescriptorCmd;
-
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpRBlks",
- adapter, Index, RcvRingInfo->Head, RcvRingInfo->Tail);
-
- /* Now grab the RcvQLock lock and proceed */
- spin_lock(&adapter->RcvQLock);
- ASSERT(Index != RcvRingInfo->Tail);
- while (sxg_ring_get_forward_diff(RcvRingInfo, Index,
- RcvRingInfo->Tail) > 3) {
- /*
- * Locate the current Cmd (ring descriptor entry), and
- * associated receive descriptor block, and advance
- * the tail
- */
- SXG_RETURN_CMD(RingZero,
- RcvRingInfo,
- RingDescriptorCmd, RcvDescriptorBlockHdr);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpRBlk",
- RcvRingInfo->Head, RcvRingInfo->Tail,
- RingDescriptorCmd, RcvDescriptorBlockHdr);
-
- /* Clear the SGL field */
- RingDescriptorCmd->Sgl = 0;
- /*
- * Attempt to refill it and hand it right back to the
- * card. If we fail to refill it, free the descriptor block
- * header. The card will be restocked later via the
- * RcvBuffersOnCard test
- */
- if (sxg_fill_descriptor_block(adapter,
- RcvDescriptorBlockHdr) == STATUS_FAILURE)
- SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter,
- RcvDescriptorBlockHdr);
- }
- spin_unlock(&adapter->RcvQLock);
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XCRBlks",
- adapter, Index, RcvRingInfo->Head, RcvRingInfo->Tail);
-}
-
-/*
- * Read the statistics which the card has been maintaining.
- */
-void sxg_collect_statistics(struct adapter_t *adapter)
-{
- if(adapter->ucode_stats)
- WRITE_REG64(adapter, adapter->UcodeRegs[0].GetUcodeStats,
- adapter->pucode_stats, 0);
- adapter->stats.rx_fifo_errors = adapter->ucode_stats->ERDrops;
- adapter->stats.rx_over_errors = adapter->ucode_stats->NBDrops;
- adapter->stats.tx_fifo_errors = adapter->ucode_stats->XDrops;
-}
-
-static struct net_device_stats *sxg_get_stats(struct net_device * dev)
-{
- struct adapter_t *adapter = netdev_priv(dev);
-
- sxg_collect_statistics(adapter);
- return (&adapter->stats);
-}
-
-static void sxg_watchdog(unsigned long data)
-{
- struct adapter_t *adapter = (struct adapter_t *) data;
-
- if (adapter->state != ADAPT_DOWN) {
- sxg_link_event(adapter);
- /* Reset the timer */
- mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
- }
-}
-
-static void sxg_update_link_status (struct work_struct *work)
-{
- struct adapter_t *adapter = (struct adapter_t *)container_of
- (work, struct adapter_t, update_link_status);
- if (likely(adapter->link_status_changed)) {
- sxg_link_event(adapter);
- adapter->link_status_changed = 0;
- }
-}
-
-static struct pci_driver sxg_driver = {
- .name = sxg_driver_name,
- .id_table = sxg_pci_tbl,
- .probe = sxg_entry_probe,
- .remove = __devexit_p(sxg_entry_remove),
-#if SXG_POWER_MANAGEMENT_ENABLED
- .suspend = sxgpm_suspend,
- .resume = sxgpm_resume,
-#endif
- /* .shutdown = slic_shutdown, MOOK_INVESTIGATE */
-};
-
-static int __init sxg_module_init(void)
-{
- sxg_init_driver();
-
- if (debug >= 0)
- sxg_debug = debug;
-
- return pci_register_driver(&sxg_driver);
-}
-
-static void __exit sxg_module_cleanup(void)
-{
- pci_unregister_driver(&sxg_driver);
-}
-
-module_init(sxg_module_init);
-module_exit(sxg_module_cleanup);
diff --git a/drivers/staging/sxg/sxg.h b/drivers/staging/sxg/sxg.h
deleted file mode 100644
index 110096a..0000000
--- a/drivers/staging/sxg/sxg.h
+++ /dev/null
@@ -1,787 +0,0 @@
-/**************************************************************************
- *
- * Copyright © 2000-2008 Alacritech, Inc. All rights reserved.
- *
- * $Id: sxg.h,v 1.3 2008/07/24 17:25:08 chris Exp $
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The views and conclusions contained in the software and documentation
- * are those of the authors and should not be interpreted as representing
- * official policies, either expressed or implied, of Alacritech, Inc.
- *
- **************************************************************************/
-
-/*
- * FILENAME: sxg.h
- *
- * This is the base set of header definitions for the SXG driver.
- */
-#ifndef __SXG_DRIVER_H__
-#define __SXG_DRIVER_H__
-
-#define SLIC_DUMP_ENABLED 0
-
-#define SXG_DRV_NAME "sxg" /* TBD: This might be removed eventually */
-#define SXG_DRV_VERSION "1.0.1"
-
-extern char sxg_driver_name[];
-
-#define SXG_NETDEV_WEIGHT 64
-
-/*
- * struct sxg_stats - Probably move these to someplace where
- * the slicstat (sxgstat?) program can get them.
- */
-struct sxg_stats {
- /* Xmt */
- u64 DumbXmtUcastPkts; /* directed packets */
- u64 DumbXmtMcastPkts; /* Multicast packets */
- u64 DumbXmtBcastPkts; /* OID_GEN_BROADCAST_FRAMES_RCV */
- u64 DumbXmtUcastBytes; /* OID_GEN_DIRECTED_BYTES_XMIT */
- u64 DumbXmtMcastBytes; /* OID_GEN_MULTICAST_BYTES_XMIT */
- u64 DumbXmtBcastBytes; /* OID_GEN_BROADCAST_BYTES_XMIT */
- u64 XmtQLen; /* OID_GEN_TRANSMIT_QUEUE_LENGTH */
- u64 XmtZeroFull; /* Transmit ring zero full */
- /* Rcv */
- u64 DumbRcvUcastBytes; /* OID_GEN_DIRECTED_BYTES_RCV */
- u64 DumbRcvMcastBytes; /* OID_GEN_MULTICAST_BYTES_RCV */
- u64 DumbRcvBcastBytes; /* OID_GEN_BROADCAST_BYTES_RCV */
- u64 DumbRcvUcastPkts; /* directed packets */
- u64 DumbRcvMcastPkts; /* Multicast packets */
- u64 DumbRcvBcastPkts; /* OID_GEN_BROADCAST_FRAMES_RCV */
- u64 PdqFull; /* Processed Data Queue Full */
- u64 EventRingFull; /* Event ring full */
- /* Verbose stats */
- u64 NoSglBuf; /* SGL buffer allocation failure */
- u64 NoMem; /* Memory allocation failure */
- u64 NumInts; /* Interrupts */
- u64 FalseInts; /* Interrupt with ISR == 0 */
- /* Sahara receive status */
- u64 TransportCsum; /* SXG_RCV_STATUS_TRANSPORT_CSUM */
- u64 TransportUflow; /* SXG_RCV_STATUS_TRANSPORT_UFLOW */
- u64 TransportHdrLen; /* SXG_RCV_STATUS_TRANSPORT_HDRLEN */
- u64 NetworkCsum; /* SXG_RCV_STATUS_NETWORK_CSUM: */
- u64 NetworkUflow; /* SXG_RCV_STATUS_NETWORK_UFLOW: */
- u64 NetworkHdrLen; /* SXG_RCV_STATUS_NETWORK_HDRLEN: */
- u64 Parity; /* SXG_RCV_STATUS_PARITY */
- u64 LinkParity; /* SXG_RCV_STATUS_LINK_PARITY: */
- u64 LinkEarly; /* SXG_RCV_STATUS_LINK_EARLY: */
- u64 LinkBufOflow; /* SXG_RCV_STATUS_LINK_BUFOFLOW: */
- u64 LinkCode; /* SXG_RCV_STATUS_LINK_CODE: */
- u64 LinkDribble; /* SXG_RCV_STATUS_LINK_DRIBBLE: */
- u64 LinkCrc; /* SXG_RCV_STATUS_LINK_CRC: */
- u64 LinkOflow; /* SXG_RCV_STATUS_LINK_OFLOW: */
- u64 LinkUflow; /* SXG_RCV_STATUS_LINK_UFLOW: */
-};
-
-
-/* DUMB-NIC Send path definitions */
-
-#define SXG_COMPLETE_DUMB_SEND(_pAdapt, _skb, _phys_addr, _size) { \
- ASSERT(_skb); \
- pci_unmap_single(_pAdapt->pcidev, _size, _phys_addr, PCI_DMA_TODEVICE); \
- dev_kfree_skb_irq(_skb); \
-}
-
-#define SXG_DROP_DUMB_SEND(_pAdapt, _skb) { \
- ASSERT(_skb); \
-}
-
-/*
- * Locate current receive header buffer location. Use this
- * instead of RcvDataHdr->VirtualAddress since the data
- * may have been offset by SXG_ADVANCE_MDL_OFFSET
- */
-#define SXG_RECEIVE_DATA_LOCATION(_RcvDataHdr) (_RcvDataHdr)->skb->data
-
-/* Dumb-NIC receive processing */
-/* Define an SXG_PACKET as an NDIS_PACKET */
-#define PSXG_PACKET struct sk_buff *
-/* Indications array size */
-#define SXG_RCV_ARRAYSIZE 64
-
-#define SXG_ALLOCATE_RCV_PACKET(_pAdapt, _RcvDataBufferHdr, BufferSize) {\
- struct sk_buff * skb; \
- skb = netdev_alloc_skb(_pAdapt->netdev, BufferSize); \
- if (skb) { \
- (_RcvDataBufferHdr)->skb = skb; \
- skb->next = NULL; \
- _RcvDataBufferHdr->PhysicalAddress = pci_map_single(adapter->pcidev,\
- _RcvDataBufferHdr->skb->data, BufferSize, PCI_DMA_FROMDEVICE); \
- if (SXG_INVALID_SGL(_RcvDataBufferHdr->PhysicalAddress,BufferSize)) \
- printk(KERN_EMERG "SXG_ALLOCATE_RCV_PACKET: RCV packet" \
- "non-64k boundary aligned\n"); \
- } else { \
- (_RcvDataBufferHdr)->skb = NULL; \
- } \
-}
-
-#define SXG_FREE_RCV_PACKET(_RcvDataBufferHdr) { \
- if((_RcvDataBufferHdr)->skb) { \
- dev_kfree_skb((_RcvDataBufferHdr)->skb); \
- } \
-}
-
-/*
- * Macro to add a NDIS_PACKET to an indication array
- * If we fill up our array of packet pointers, then indicate this
- * block up now and start on a new one.
- */
-#define SXG_ADD_RCV_PACKET(_pAdapt, _Packet, _PrevPacket, _IndicationList, \
- _NumPackets) { \
- (_IndicationList)[_NumPackets] = (_Packet); \
- (_NumPackets)++; \
- if((_NumPackets) == SXG_RCV_ARRAYSIZE) { \
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "IndicRcv", \
- (_NumPackets), 0, 0, 0); \
- netif_rx((_IndicationList),(_NumPackets)); \
- (_NumPackets) = 0; \
- } \
-}
-
-#define SXG_INDICATE_PACKETS(_pAdapt, _IndicationList, _NumPackets) { \
- if(_NumPackets) { \
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "IndicRcv", \
- (_NumPackets), 0, 0, 0); \
- netif_rx((_IndicationList),(_NumPackets)); \
- (_NumPackets) = 0; \
- } \
-}
-
-#define SXG_REINIATIALIZE_PACKET(_Packet) \
- {} /*_NdisReinitializePacket(_Packet)*/
- /* this is not necessary with an skb */
-
-/* Definitions to initialize Dumb-nic Receive NBLs */
-#define SXG_RCV_PACKET_BUFFER_HDR(_Packet) (((struct sxg_rcv_nbl_reserved *)\
- ((_Packet)->MiniportReservedEx))->RcvDataBufferHdr)
-
-#define SXG_RCV_SET_CHECKSUM_INFO(_Packet, _Cpi) \
- NDIS_PER_PACKET_INFO_FROM_PACKET((_Packet), \
- TcpIpChecksumPacketInfo) = (PVOID)(_Cpi)
-
-#define SXG_RCV_SET_TOEPLITZ(_Packet, _Toeplitz, _Type, _Function) { \
- NDIS_PACKET_SET_HASH_VALUE((_Packet), (_Toeplitz)); \
- NDIS_PACKET_SET_HASH_TYPE((_Packet), (_Type)); \
- NDIS_PACKET_SET_HASH_FUNCTION((_Packet), (_Function)); \
-}
-
-#define SXG_RCV_SET_VLAN_INFO(_Packet, _VlanId, _Priority) { \
- NDIS_PACKET_8021Q_INFO _Packet8021qInfo; \
- _Packet8021qInfo.TagHeader.VlanId = (_VlanId); \
- _Packet8021qInfo.TagHeader.UserPriority = (_Priority); \
- NDIS_PER_PACKET_INFO_FROM_PACKET((_Packet), Ieee8021QNetBufferListInfo) = \
- _Packet8021qInfo.Value; \
-}
-
-#define SXG_ADJUST_RCV_PACKET(_Packet, _RcvDataBufferHdr, _Event) { \
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbRcv", \
- (_RcvDataBufferHdr), (_Packet), \
- (_Event)->Status, 0); \
- /* ASSERT((_Event)->Length <= (_RcvDataBufferHdr)->Size); */ \
- skb_put(Packet, (_Event)->Length); \
-}
-
-/*
- * Macros to free a receive data buffer and receive data descriptor block
- * NOTE - Lock must be held with RCV macros
- */
-#define SXG_GET_RCV_DATA_BUFFER(_pAdapt, _Hdr) { \
- struct list_entry *_ple; \
- _Hdr = NULL; \
- if((_pAdapt)->FreeRcvBufferCount) { \
- ASSERT(!(IsListEmpty(&(_pAdapt)->FreeRcvBuffers))); \
- _ple = RemoveHeadList(&(_pAdapt)->FreeRcvBuffers); \
- (_Hdr) = container_of(_ple, struct sxg_rcv_data_buffer_hdr, \
- FreeList); \
- (_pAdapt)->FreeRcvBufferCount--; \
- ASSERT((_Hdr)->State == SXG_BUFFER_FREE); \
- } \
-}
-
-#define SXG_FREE_RCV_DATA_BUFFER(_pAdapt, _Hdr) { \
- SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RtnDHdr", \
- (_Hdr), (_pAdapt)->FreeRcvBufferCount, \
- (_Hdr)->State, 0/*(_Hdr)->VirtualAddress*/); \
-/* SXG_RESTORE_MDL_OFFSET(_Hdr); */ \
- (_pAdapt)->FreeRcvBufferCount++; \
- ASSERT(((_pAdapt)->AllRcvBlockCount * SXG_RCV_DESCRIPTORS_PER_BLOCK) \
- >= (_pAdapt)->FreeRcvBufferCount); \
- ASSERT((_Hdr)->State != SXG_BUFFER_FREE); \
- (_Hdr)->State = SXG_BUFFER_FREE; \
- InsertTailList(&(_pAdapt)->FreeRcvBuffers, &((_Hdr)->FreeList)); \
-}
-
-#define SXG_FREE_RCV_DESCRIPTOR_BLOCK(_pAdapt, _Hdr) { \
- ASSERT((_Hdr)->State != SXG_BUFFER_FREE); \
- (_Hdr)->State = SXG_BUFFER_FREE; \
- (_pAdapt)->FreeRcvBlockCount++; \
- ASSERT((_pAdapt)->AllRcvBlockCount >= (_pAdapt)->FreeRcvBlockCount); \
- InsertTailList(&(_pAdapt)->FreeRcvBlocks, &(_Hdr)->FreeList); \
-}
-
-/* SGL macros */
-#define SXG_FREE_SGL_BUFFER(_pAdapt, _Sgl, _NB) { \
- spin_lock_irqsave(&(_pAdapt)->SglQLock, sgl_flags); \
- (_pAdapt)->FreeSglBufferCount++; \
- ASSERT((_pAdapt)->AllSglBufferCount >= (_pAdapt)->FreeSglBufferCount); \
- ASSERT(!((_Sgl)->State & SXG_BUFFER_FREE)); \
- (_Sgl)->State = SXG_BUFFER_FREE; \
- InsertTailList(&(_pAdapt)->FreeSglBuffers, &(_Sgl)->FreeList); \
- spin_unlock_irqrestore(&(_pAdapt)->SglQLock, sgl_flags); \
-}
-
-/*
- * Get an SGL buffer from the free queue. The first part of this macro
- * attempts to keep ahead of buffer depletion by allocating more when
- * we hit a minimum threshold. Note that we don't grab the lock
- * until after that. We're dealing with round numbers here, so we don't need to,
- * and not grabbing it avoids a possible double-trip.
- */
-#define SXG_GET_SGL_BUFFER(_pAdapt, _Sgl, _irq) { \
- struct list_entry *_ple; \
- if ((_pAdapt->FreeSglBufferCount < SXG_MIN_SGL_BUFFERS) && \
- (_pAdapt->AllSglBufferCount < SXG_MAX_SGL_BUFFERS) && \
- (atomic_read(&_pAdapt->pending_allocations) == 0)) { \
- sxg_allocate_buffer_memory(_pAdapt, \
- (sizeof(struct sxg_scatter_gather) + SXG_SGL_BUF_SIZE),\
- SXG_BUFFER_TYPE_SGL); \
- } \
- _Sgl = NULL; \
- if(!_irq) \
- spin_lock_irqsave(&(_pAdapt)->SglQLock, sgl_flags); \
- else \
- spin_lock_irqsave(&(_pAdapt)->SglQLock, sgl_flags); \
- if((_pAdapt)->FreeSglBufferCount) { \
- ASSERT(!(IsListEmpty(&(_pAdapt)->FreeSglBuffers))); \
- _ple = RemoveHeadList(&(_pAdapt)->FreeSglBuffers); \
- (_Sgl) = container_of(_ple, struct sxg_scatter_gather, \
- FreeList); \
- (_pAdapt)->FreeSglBufferCount--; \
- ASSERT((_Sgl)->State == SXG_BUFFER_FREE); \
- (_Sgl)->State = SXG_BUFFER_BUSY; \
- (_Sgl)->pSgl = NULL; \
- } \
- if(!_irq) \
- spin_unlock_irqrestore(&(_pAdapt)->SglQLock, sgl_flags);\
- else \
- spin_unlock_irqrestore(&(_pAdapt)->SglQLock, sgl_flags);\
-}
-
-/*
- * struct sxg_multicast_address
- * Linked list of multicast addresses.
- */
-struct sxg_multicast_address {
- unsigned char Address[6];
- struct sxg_multicast_address *Next;
-};
-
-/*
- * Structure to maintain chimney send and receive buffer queues.
- * This structure maintains NET_BUFFER_LIST queues that are
- * given to us via the Chimney MiniportTcpOffloadSend and
- * MiniportTcpOffloadReceive routines. This structure DOES NOT
- * manage our data buffer queue
- */
-struct sxg_buffer_queue {
- u32 Type; /* Slow or fast - See below */
- u32 Direction; /* Xmt or Rcv */
- u32 Bytes; /* Byte count */
- u32 * Head; /* Send queue head */
- u32 * Tail; /* Send queue tail */
-/* PNET_BUFFER_LIST NextNBL;*/ /* Short cut - next NBL */
-/* PNET_BUFFER NextNB; */ /* Short cut - next NB */
-};
-
-#define SXG_SLOW_SEND_BUFFER 0
-#define SXG_FAST_SEND_BUFFER 1
-#define SXG_RECEIVE_BUFFER 2
-
-#define SXG_INIT_BUFFER(_Buffer, _Type) { \
- (_Buffer)->Type = (_Type); \
- if((_Type) == SXG_RECEIVE_BUFFER) { \
- (_Buffer)->Direction = 0; \
- } else { \
- (_Buffer)->Direction = NDIS_SG_LIST_WRITE_TO_DEVICE; \
- } \
- (_Buffer)->Bytes = 0; \
- (_Buffer)->Head = NULL; \
- (_Buffer)->Tail = NULL; \
-}
-
-
-#define SXG_RSS_CPU_COUNT(_pAdapt) \
- ((_pAdapt)->RssEnabled ? NR_CPUS : 1)
-
-/* DRIVER and ADAPTER structures */
-
-/*
- * Adapter states - These states closely match the adapter states
- * documented in the DDK (with a few exceptions).
- */
-enum SXG_STATE {
- SXG_STATE_INITIALIZING, /* Initializing */
- SXG_STATE_BOOTDIAG, /* Boot-Diagnostic mode */
- SXG_STATE_PAUSING, /* Pausing */
- SXG_STATE_PAUSED, /* Paused */
- SXG_STATE_RUNNING, /* Running */
- SXG_STATE_RESETTING, /* Reset in progress */
- SXG_STATE_SLEEP, /* Sleeping */
- SXG_STATE_DIAG, /* Diagnostic mode */
- SXG_STATE_HALTING, /* Halting */
- SXG_STATE_HALTED, /* Down or not-initialized */
- SXG_STATE_SHUTDOWN /* shutdown */
-};
-
-/* Link state */
-enum SXG_LINK_STATE {
- SXG_LINK_DOWN,
- SXG_LINK_UP
-};
-
-/* Link initialization timeout in 100us units */
-#define SXG_LINK_TIMEOUT 100000 /* 10 Seconds - REDUCE! */
-
-
-/* Microcode file selection codes */
-enum SXG_UCODE_SEL {
- SXG_UCODE_SYSTEM, /* System (operational) uucode */
- SXG_UCODE_SDIAGCPU, /* System CPU diagnostic ucode */
- SXG_UCODE_SDIAGSYS /* System diagnostic ucode */
-};
-
-
-#define SXG_DISABLE_ALL_INTERRUPTS(_padapt) sxg_disable_interrupt(_padapt)
-#define SXG_ENABLE_ALL_INTERRUPTS(_padapt) sxg_enable_interrupt(_padapt)
-
-/* This probably lives in a proto.h file. Move later */
-#define SXG_MULTICAST_PACKET(_pether) ((_pether)->ether_dhost[0] & 0x01)
-#define SXG_BROADCAST_PACKET(_pether) \
- ((*(u32 *)(_pether)->ether_dhost == 0xFFFFFFFF) && \
- (*(u16 *)&(_pether)->ether_dhost[4] == 0xFFFF))
-
-/* For DbgPrints */
-#define SXG_ID DPFLTR_IHVNETWORK_ID
-#define SXG_ERROR DPFLTR_ERROR_LEVEL
-
-/*
- * struct sxg_driver structure -
- *
- * contains information about the sxg driver. There is only
- * one of these, and it is defined as a global.
- */
-
-struct sxg_driver {
- struct adapter_t *Adapters; /* Linked list of adapters */
- ushort AdapterID; /* Maintain unique adapter ID */
-};
-
-#ifdef STATUS_SUCCESS
-#undef STATUS_SUCCESS
-#endif
-
-/* TODO: We need to try and use NETDEV_TX_* before posting this out */
-#define STATUS_SUCCESS 0
-#define STATUS_PENDING 0
-#define STATUS_FAILURE -1
-#define STATUS_ERROR -2
-#define STATUS_NOT_SUPPORTED -3
-#define STATUS_BUFFER_TOO_SHORT -4
-#define STATUS_RESOURCES -5
-
-#define SLIC_MAX_CARDS 32
-#define SLIC_MAX_PORTS 4 /* Max # of ports per card */
-#if SLIC_DUMP_ENABLED
-
-/*
- * Dump buffer size
- * This cannot be bigger than the max DMA size the card supports,
- * given the current code structure in the host and ucode.
- * Mojave supports 16K, Oasis supports 16K-1, so
- * just set this at 15K, shouldnt make that much of a diff.
- */
-#define DUMP_BUF_SIZE 0x3C00
-#endif
-
-#define MIN(a, b) ((u32)(a) < (u32)(b) ? (a) : (b))
-#define MAX(a, b) ((u32)(a) > (u32)(b) ? (a) : (b))
-
-struct mcast_address {
- unsigned char address[6];
- struct mcast_address *next;
-};
-
-#define CARD_DOWN 0x00000000
-#define CARD_UP 0x00000001
-#define CARD_FAIL 0x00000002
-#define CARD_DIAG 0x00000003
-#define CARD_SLEEP 0x00000004
-
-#define ADAPT_DOWN 0x00
-#define ADAPT_UP 0x01
-#define ADAPT_FAIL 0x02
-#define ADAPT_RESET 0x03
-#define ADAPT_SLEEP 0x04
-
-#define ADAPT_FLAGS_BOOTTIME 0x0001
-#define ADAPT_FLAGS_IS64BIT 0x0002
-#define ADAPT_FLAGS_PENDINGLINKDOWN 0x0004
-#define ADAPT_FLAGS_FIBERMEDIA 0x0008
-#define ADAPT_FLAGS_LOCKS_ALLOCED 0x0010
-#define ADAPT_FLAGS_INT_REGISTERED 0x0020
-#define ADAPT_FLAGS_LOAD_TIMER_SET 0x0040
-#define ADAPT_FLAGS_STATS_TIMER_SET 0x0080
-#define ADAPT_FLAGS_RESET_TIMER_SET 0x0100
-
-#define LINK_DOWN 0x00
-#define LINK_CONFIG 0x01
-#define LINK_UP 0x02
-
-#define LINK_10MB 0x00
-#define LINK_100MB 0x01
-#define LINK_AUTOSPEED 0x02
-#define LINK_1000MB 0x03
-#define LINK_10000MB 0x04
-
-#define LINK_HALFD 0x00
-#define LINK_FULLD 0x01
-#define LINK_AUTOD 0x02
-
-#define MAC_DIRECTED 0x00000001
-#define MAC_BCAST 0x00000002
-#define MAC_MCAST 0x00000004
-#define MAC_PROMISC 0x00000008
-#define MAC_LOOPBACK 0x00000010
-#define MAC_ALLMCAST 0x00000020
-
-#define SLIC_DUPLEX(x) ((x==LINK_FULLD) ? "FDX" : "HDX")
-#define SLIC_SPEED(x) ((x==LINK_100MB) ? "100Mb" : \
- ((x==LINK_1000MB) ? "1000Mb" : " 10Mb"))
-#define SLIC_LINKSTATE(x) ((x==LINK_DOWN) ? "Down" : "Up ")
-#define SLIC_ADAPTER_STATE(x) ((x==ADAPT_UP) ? "UP" : "Down")
-#define SLIC_CARD_STATE(x) ((x==CARD_UP) ? "UP" : "Down")
-
-
-struct ether_header {
- unsigned char ether_dhost[6];
- unsigned char ether_shost[6];
- ushort ether_type;
-};
-
-
-#define NUM_CFG_SPACES 2
-#define NUM_CFG_REGS 64
-
-/*
- * We split LSS sends across four microcode queues derived from
- * destination TCP port (if TCP/IP).
- */
-#define SXG_LARGE_SEND_QUEUE_MASK 0x3
-#define ISCSI_PORT 0xbc0c /* 3260 */
-
-struct physcard {
- struct adapter_t *adapter[SLIC_MAX_PORTS];
- struct physcard *next;
- unsigned int adapters_allocd;
-};
-
-struct sxgbase_driver {
- spinlock_t driver_lock;
- unsigned long flags; /* irqsave for spinlock */
- u32 num_sxg_cards;
- u32 num_sxg_ports;
- u32 num_sxg_ports_active;
- u32 dynamic_intagg;
- struct physcard *phys_card;
-};
-
-
-struct adapter_t {
- void * ifp;
- unsigned int port;
- struct napi_struct napi;
- struct physcard *physcard;
- unsigned int physport;
- unsigned int slotnumber;
- unsigned int functionnumber;
- ushort vendid;
- ushort devid;
- ushort subsysid;
- u32 irq;
-
- void __iomem * base_addr;
- u32 memorylength;
- u32 drambase;
- u32 dramlength;
- enum asic_type asictype; /* type of ASIC (chip) */
- unsigned int activated;
- u32 intrregistered;
- unsigned int isp_initialized;
- unsigned char state;
- unsigned char linkstate;
- unsigned int flags;
- unsigned char macaddr[6];
- unsigned char currmacaddr[6];
- u32 macopts;
- ushort devflags_prev;
- u64 mcastmask;
- struct mcast_address *mcastaddrs;
- struct timer_list pingtimer;
- u32 pingtimerset;
- struct timer_list statstimer;
- u32 statstimerset;
- struct timer_list vpci_timer;
- u32 vpci_timerset;
- struct timer_list loadtimer;
- u32 loadtimerset;
-
- u32 xmitq_full;
- u32 all_reg_writes;
- u32 icr_reg_writes;
- u32 isr_reg_writes;
- u32 error_interrupts;
- u32 error_rmiss_interrupts;
- u32 rx_errors;
- u32 rcv_drops;
- u32 rcv_interrupts;
- u32 xmit_interrupts;
- u32 linkevent_interrupts;
- u32 upr_interrupts;
- u32 num_isrs;
- u32 false_interrupts;
- u32 tx_packets;
- u32 xmit_completes;
- u32 tx_drops;
- u32 rcv_broadcasts;
- u32 rcv_multicasts;
- u32 rcv_unicasts;
- u32 max_isr_rcvs;
- u32 max_isr_xmits;
- u32 rcv_interrupt_yields;
- u32 intagg_period;
- struct net_device_stats stats;
- u32 * MiniportHandle; /* Our miniport handle */
- enum SXG_STATE State; /* Adapter state */
- enum SXG_LINK_STATE LinkState; /* Link state */
- u64 LinkSpeed; /* Link Speed */
- u32 PowerState; /* NDIS power state */
- struct adapter_t *Next; /* Linked list */
- ushort AdapterID; /* 1..n */
- struct net_device * netdev;
- struct net_device * next_netdevice;
- struct pci_dev *pcidev;
-
- struct sxg_multicast_address *MulticastAddrs; /* Multicast list */
- u64 MulticastMask; /* Multicast mask */
- u32 *InterruptHandle; /* Register Interrupt handle */
- u32 InterruptLevel; /* From Resource list */
- u32 InterruptVector; /* From Resource list */
- spinlock_t AdapterLock; /* Serialize access adapter routines */
- spinlock_t Bit64RegLock; /* For writing 64-bit addresses */
- struct sxg_hw_regs *HwRegs; /* Sahara HW Register Memory (BAR0/1) */
- struct sxg_ucode_regs *UcodeRegs; /* Microcode Register Memory (BAR2/3) */
- struct sxg_tcb_regs *TcbRegs; /* Same as Ucode regs - See sxghw.h */
- ushort FrameSize; /* Maximum frame size */
- u32 * DmaHandle; /* NDIS DMA handle */
- u32 * PacketPoolHandle; /* Used with NDIS 5.2 only. Don't ifdef out */
- u32 * BufferPoolHandle; /* Used with NDIS 5.2 only. Don't ifdef out */
- u32 MacFilter; /* NDIS MAC Filter */
- struct sxg_event_ring *EventRings; /* Host event rings. 1/CPU to 16 max */
- dma_addr_t PEventRings; /* Physical address */
- u32 NextEvent[SXG_MAX_RSS]; /* Current location in ring */
- dma_addr_t PTcbBuffers; /* TCB Buffers - physical address */
- dma_addr_t PTcbCompBuffers; /* TCB Composite Buffers - phys addr */
- struct sxg_xmt_ring *XmtRings; /* Transmit rings */
- dma_addr_t PXmtRings; /* Transmit rings - physical address */
- struct sxg_ring_info XmtRingZeroInfo; /* Transmit ring 0 info */
-
- spinlock_t XmtZeroLock; /* Transmit ring 0 lock */
- u32 * XmtRingZeroIndex; /* Shared XMT ring 0 index */
- dma_addr_t PXmtRingZeroIndex; /* Shared XMT ring 0 index - physical */
- struct list_entry FreeProtocolHeaders;/* Free protocol headers */
- u32 FreeProtoHdrCount; /* Count */
- void * ProtocolHeaders; /* Block of protocol header */
- dma_addr_t PProtocolHeaders; /* Block of protocol headers - phys */
-
- struct sxg_rcv_ring *RcvRings; /* Receive rings */
- dma_addr_t PRcvRings; /* Receive rings - physical address */
- struct sxg_ucode_stats *ucode_stats; /* Ucode Stats */
- /* Ucode Stats - physical address */
- dma_addr_t pucode_stats;
-
- struct sxg_ring_info RcvRingZeroInfo; /* Receive ring 0 info */
-
- u32 * Isr; /* Interrupt status register */
- dma_addr_t PIsr; /* ISR - physical address */
- u32 IsrCopy[SXG_MAX_RSS]; /* Copy of ISR */
- ushort InterruptsEnabled; /* Bitmask of enabled vectors */
- unsigned char *IndirectionTable; /* RSS indirection table */
- dma_addr_t PIndirectionTable; /* Physical address */
- ushort RssTableSize; /* From NDIS_RECEIVE_SCALE_PARAMETERS */
- ushort HashKeySize; /* From NDIS_RECEIVE_SCALE_PARAMETERS */
- unsigned char HashSecretKey[40]; /* rss key */
- u32 HashInformation;
- /* Receive buffer queues */
- spinlock_t RcvQLock; /* Receive Queue Lock */
- struct list_entry FreeRcvBuffers; /* Free SXG_DATA_BUFFER queue */
- struct list_entry FreeRcvBlocks; /* Free SXG_RCV_DESCRIPTOR_BLOCK Q */
- struct list_entry AllRcvBlocks; /* All SXG_RCV_BLOCKs */
- ushort FreeRcvBufferCount; /* Number of free rcv data buffers */
- ushort FreeRcvBlockCount; /* # of free rcv descriptor blocks */
- ushort AllRcvBlockCount; /* Number of total receive blocks */
- ushort ReceiveBufferSize; /* SXG_RCV_DATA/JUMBO_BUFFER_SIZE only */
- /* Converted this to a atomic variable
- u32 AllocationsPending; */
- atomic_t pending_allocations;
- u32 AllocationsPending; /* Receive allocation pending */
- u32 RcvBuffersOnCard; /* SXG_DATA_BUFFERS owned by card */
- /* SGL buffers */
- spinlock_t SglQLock; /* SGL Queue Lock */
- struct list_entry FreeSglBuffers; /* Free struct sxg_scatter_gather */
- struct list_entry AllSglBuffers; /* All struct sxg_scatter_gather */
- ushort FreeSglBufferCount; /* Number of free SGL buffers */
- ushort AllSglBufferCount; /* Number of total SGL buffers */
- u32 CurrentTime; /* Tick count */
- u32 FastpathConnections;/* # of fastpath connections */
- /* Various single-bit flags: */
- u32 BasicAllocations:1; /* Locks and listheads */
- u32 IntRegistered:1; /* Interrupt registered */
- u32 PingOutstanding:1; /* Ping outstanding to card */
- u32 Dead:1; /* Card dead */
- u32 DumpDriver:1; /* OID_SLIC_DRIVER_DUMP request */
- u32 DumpCard:1; /* OID_SLIC_CARD_DUMP request */
- u32 DumpCmdRunning:1; /* Dump command in progress */
- u32 DebugRunning:1; /* AGDB debug in progress */
- u32 JumboEnabled:1; /* Jumbo frames enabled */
- u32 msi_enabled:1; /* MSI interrupt enabled */
- u32 RssEnabled:1; /* RSS Enabled */
- u32 FailOnBadEeprom:1; /* Fail on Bad Eeprom */
- u32 DiagStart:1; /* Init adapter for diagnostic start */
- u32 XmtFcEnabled:1;
- u32 RcvFcEnabled:1;
- /* Stats */
- u32 PendingRcvCount; /* Outstanding rcv indications */
- u32 PendingXmtCount; /* Outstanding send requests */
- struct sxg_stats Stats; /* Statistics */
- u32 ReassBufs; /* Number of reassembly buffers */
- /* Card Crash Info */
- ushort CrashLocation; /* Microcode crash location */
- unsigned char CrashCpu; /* Sahara CPU ID */
- /* Diagnostics */
- /* PDIAG_CMD DiagCmds; */ /* List of free diagnostic commands */
- /* PDIAG_BUFFER DiagBuffers; */ /* List of free diagnostic buffers */
- /* PDIAG_REQ DiagReqQ; */ /* List of outstanding (asynchronous) diag requests */
- /* u32 DiagCmdTimeout; */ /* Time out for diag cmds (seconds) XXXTODO - replace with SXG_PARAM var? */
- /* unsigned char DiagDmaDesc[DMA_CPU_CTXS]; */ /* Free DMA descriptors bit field (32 CPU ctx * 8 DMA ctx) */
- /*
- * Put preprocessor-conditional fields at the end so we don't
- * have to recompile sxgdbg everytime we reconfigure the driver
- */
-#if defined(CONFIG_X86)
- u32 AddrUpper; /* Upper 32 bits of 64-bit register */
-#endif
- unsigned short max_aggregation;
- unsigned short min_aggregation;
- /*#if SXG_FAILURE_DUMP */
- /* NDIS_EVENT DumpThreadEvent; */ /* syncronize dump thread */
- /* BOOLEAN DumpThreadRunning; */ /* termination flag */
- /* PSXG_DUMP_CMD DumpBuffer; */ /* 68k - Cmd and Buffer */
- /* dma_addr_t PDumpBuffer; */ /* Physical address */
- /*#endif */ /* SXG_FAILURE_DUMP */
- /*MSI-X related data elements*/
- u32 nr_msix_entries;
- struct msix_entry *msi_entries;
- struct timer_list watchdog_timer;
- struct work_struct update_link_status;
- u32 link_status_changed;
-};
-
-#if SLIC_DUMP_ENABLED
-#define SLIC_DUMP_REQUESTED 1
-#define SLIC_DUMP_IN_PROGRESS 2
-#define SLIC_DUMP_DONE 3
-
-/*
- * Microcode crash information structure. This
- * structure is written out to the card's SRAM when the microcode panic's.
- */
-struct slic_crash_info {
- ushort cpu_id;
- ushort crash_pc;
-};
-
-#define CRASH_INFO_OFFSET 0x155C
-
-#endif
-
-#define UPDATE_STATS(largestat, newstat, oldstat) \
-{ \
- if ((newstat) < (oldstat)) \
- (largestat) += ((newstat) + (0xFFFFFFFF - oldstat + 1)); \
- else \
- (largestat) += ((newstat) - (oldstat)); \
-}
-
-#define UPDATE_STATS_GB(largestat, newstat, oldstat) \
-{ \
- (largestat) += ((newstat) - (oldstat)); \
-}
-
-#define ETHER_EQ_ADDR(_AddrA, _AddrB, _Result) \
-{ \
- _Result = TRUE; \
- if (*(u32 *)(_AddrA) != *(u32 *)(_AddrB)) \
- _Result = FALSE; \
- if (*(u16 *)(&((_AddrA)[4])) != *(u16 *)(&((_AddrB)[4]))) \
- _Result = FALSE; \
-}
-
-#define ETHERMAXFRAME 1514
-#define JUMBOMAXFRAME 9014
-
-#define SXG_JUMBO_MTU 9000
-#define SXG_DEFAULT_MTU 1500
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_IA64)
-#define SXG_GET_ADDR_LOW(_addr) (u32)((u64)(_addr) & 0x00000000FFFFFFFF)
-#define SXG_GET_ADDR_HIGH(_addr) \
- (u32)(((u64)(_addr) >> 32) & 0x00000000FFFFFFFF)
-#else
-#define SXG_GET_ADDR_LOW(_addr) (u32)_addr
-#define SXG_GET_ADDR_HIGH(_addr) (u32)0
-#endif
-
-#define FLUSH TRUE
-#define DONT_FLUSH FALSE
-
-#define SIOCSLICDUMPCARD (SIOCDEVPRIVATE+9)
-#define SIOCSLICSETINTAGG (SIOCDEVPRIVATE+10)
-#define SIOCSLICTRACEDUMP (SIOCDEVPRIVATE+11)
-
-extern const struct ethtool_ops sxg_nic_ethtool_ops;
-#define SXG_COMPLETE_SLOW_SEND_LIMIT 128
-#endif /* __SXG_DRIVER_H__ */
diff --git a/drivers/staging/sxg/sxg_ethtool.c b/drivers/staging/sxg/sxg_ethtool.c
deleted file mode 100644
index f5a0706..0000000
--- a/drivers/staging/sxg/sxg_ethtool.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/**************************************************************************
- *
- * Copyright (C) 2000-2008 Alacritech, Inc. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The views and conclusions contained in the software and documentation
- * are those of the authors and should not be interpreted as representing
- * official policies, either expressed or implied, of Alacritech, Inc.
- *
- **************************************************************************/
-
-/*
- * FILENAME: sxg_ethtool.c
- *
- * The ethtool support for SXG driver for Alacritech's 10Gbe products.
- *
- * NOTE: This is the standard, non-accelerated version of Alacritech's
- * IS-NIC driver.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/skbuff.h>
-#include <linux/pci.h>
-
-#include "sxg_os.h"
-#include "sxghw.h"
-#include "sxghif.h"
-#include "sxg.h"
-
-struct sxg_nic_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
-};
-
-#define SXG_NIC_STATS(m) sizeof(((struct adapter_t *)0)->m), \
- offsetof(struct adapter_t, m)
-
-#define USER_VIEWABLE_EEPROM_SIZE 28
-
-static struct sxg_nic_stats sxg_nic_gstrings_stats[] = {
- {"xmit_ring_0_full", SXG_NIC_STATS(Stats.XmtZeroFull)},
-
- /* May be will need in future */
-/* {"dumb_xmit_broadcast_packets", SXG_NIC_STATS(Stats.DumbXmtBcastPkts)},
- {"dumb_xmit_broadcast_bytes", SXG_NIC_STATS(Stats.DumbXmtBcastBytes)},
- {"dumb_xmit_unicast_packets", SXG_NIC_STATS(Stats.DumbXmtUcastPkts)},
- {"dumb_xmit_unicast_bytes", SXG_NIC_STATS(Stats.DumbXmtUcastBytes)},
-*/
- {"xmit_queue_length", SXG_NIC_STATS(Stats.XmtQLen)},
- {"memory_allocation_failure", SXG_NIC_STATS(Stats.NoMem)},
- {"Interrupts", SXG_NIC_STATS(Stats.NumInts)},
- {"false_interrupts", SXG_NIC_STATS(Stats.FalseInts)},
- {"processed_data_queue_full", SXG_NIC_STATS(Stats.PdqFull)},
- {"event_ring_full", SXG_NIC_STATS(Stats.EventRingFull)},
- {"transport_checksum_error", SXG_NIC_STATS(Stats.TransportCsum)},
- {"transport_underflow_error", SXG_NIC_STATS(Stats.TransportUflow)},
- {"transport_header_length_error", SXG_NIC_STATS(Stats.TransportHdrLen)},
- {"network_checksum_error", SXG_NIC_STATS(Stats.NetworkCsum)},
- {"network_underflow_error", SXG_NIC_STATS(Stats.NetworkUflow)},
- {"network_header_length_error", SXG_NIC_STATS(Stats.NetworkHdrLen)},
- {"receive_parity_error", SXG_NIC_STATS(Stats.Parity)},
- {"link_parity_error", SXG_NIC_STATS(Stats.LinkParity)},
- {"link/data early_error", SXG_NIC_STATS(Stats.LinkEarly)},
- {"buffer_overflow_error", SXG_NIC_STATS(Stats.LinkBufOflow)},
- {"link_code_error", SXG_NIC_STATS(Stats.LinkCode)},
- {"dribble nibble", SXG_NIC_STATS(Stats.LinkDribble)},
- {"CRC_error", SXG_NIC_STATS(Stats.LinkCrc)},
- {"link_overflow_error", SXG_NIC_STATS(Stats.LinkOflow)},
- {"link_underflow_error", SXG_NIC_STATS(Stats.LinkUflow)},
-
- /* May be need in future */
-/* {"dumb_rcv_broadcast_packets", SXG_NIC_STATS(Stats.DumbRcvBcastPkts)},
- {"dumb_rcv_broadcast_bytes", SXG_NIC_STATS(Stats.DumbRcvBcastBytes)},
-*/ {"dumb_rcv_multicast_packets", SXG_NIC_STATS(Stats.DumbRcvMcastPkts)},
- {"dumb_rcv_multicast_bytes", SXG_NIC_STATS(Stats.DumbRcvMcastBytes)},
-/* {"dumb_rcv_unicast_packets", SXG_NIC_STATS(Stats.DumbRcvUcastPkts)},
- {"dumb_rcv_unicast_bytes", SXG_NIC_STATS(Stats.DumbRcvUcastBytes)},
-*/
- {"no_sgl_buffer", SXG_NIC_STATS(Stats.NoSglBuf)},
-};
-
-#define SXG_NIC_STATS_LEN ARRAY_SIZE(sxg_nic_gstrings_stats)
-
-static inline void sxg_reg32_write(void __iomem *reg, u32 value, bool flush)
-{
- writel(value, reg);
- if (flush)
- mb();
-}
-
-static inline void sxg_reg64_write(struct adapter_t *adapter, void __iomem *reg,
- u64 value, u32 cpu)
-{
- u32 value_high = (u32) (value >> 32);
- u32 value_low = (u32) (value & 0x00000000FFFFFFFF);
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->Bit64RegLock, flags);
- writel(value_high, (void __iomem *)(&adapter->UcodeRegs[cpu].Upper));
- writel(value_low, reg);
- spin_unlock_irqrestore(&adapter->Bit64RegLock, flags);
-}
-
-static void
-sxg_nic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
-{
- struct adapter_t *adapter = netdev_priv(dev);
- strncpy(drvinfo->driver, sxg_driver_name, 32);
- strncpy(drvinfo->version, SXG_DRV_VERSION, 32);
-// strncpy(drvinfo->fw_version, SAHARA_UCODE_VERS_STRING, 32);
- strncpy(drvinfo->bus_info, pci_name(adapter->pcidev), 32);
- /* TODO : Read the major and minor number of firmware. Is this
- * from the FLASH/EEPROM or download file ?
- */
- /* LINSYS : Check if this is correct or if not find the right value
- * Also check what is the right EEPROM length : EEPROM_SIZE_XFMR or EEPROM_SIZE_NO_XFMR
- */
-}
-
-static int sxg_nic_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- /* No settings are applicable as we support only 10Gb/FIBRE_media */
- return -EOPNOTSUPP;
-}
-
-static void
-sxg_nic_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
-{
- int index;
-
- switch(stringset) {
- case ETH_SS_TEST:
- break;
- case ETH_SS_STATS:
- for (index = 0; index < SXG_NIC_STATS_LEN; index++) {
- memcpy(data + index * ETH_GSTRING_LEN,
- sxg_nic_gstrings_stats[index].stat_string,
- ETH_GSTRING_LEN);
- }
- break;
- }
-}
-
-static void
-sxg_nic_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 * data)
-{
- struct adapter_t *adapter = netdev_priv(netdev);
- int index;
- for (index = 0; index < SXG_NIC_STATS_LEN; index++) {
- char *p = (char *)adapter +
- sxg_nic_gstrings_stats[index].stat_offset;
- data[index] = (sxg_nic_gstrings_stats[index].sizeof_stat ==
- sizeof(u64)) ? *(u64 *) p : *(u32 *) p;
- }
-}
-
-static int sxg_nic_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return SXG_NIC_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static int sxg_nic_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct adapter_t *adapter = netdev_priv(netdev);
-
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->autoneg = AUTONEG_ENABLE; //VSS check This
- ecmd->transceiver = XCVR_EXTERNAL; //VSS check This
-
- /* For Fibre Channel */
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising = (ADVERTISED_10000baseT_Full |
- ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
-
-
- /* Link Speed */
- if(adapter->LinkState & SXG_LINK_UP) {
- ecmd->speed = SPEED_10000; //adapter->LinkSpeed;
- ecmd->duplex = DUPLEX_FULL;
- }
- return 0;
-}
-
-static u32 sxg_nic_get_rx_csum(struct net_device *netdev)
-{
- struct adapter_t *adapter = netdev_priv(netdev);
- return ((adapter->flags & SXG_RCV_IP_CSUM_ENABLED) &&
- (adapter->flags & SXG_RCV_TCP_CSUM_ENABLED));
-}
-
-static int sxg_nic_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct adapter_t *adapter = netdev_priv(netdev);
- if (data)
- adapter->flags |= SXG_RCV_IP_CSUM_ENABLED;
- else
- adapter->flags &= ~SXG_RCV_IP_CSUM_ENABLED;
- /*
- * We dont need to write to the card to do checksums.
- * It does it anyways.
- */
- return 0;
-}
-
-static int sxg_nic_get_regs_len(struct net_device *dev)
-{
- return (SXG_HWREG_MEMSIZE + SXG_UCODEREG_MEMSIZE);
-}
-
-static void sxg_nic_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct adapter_t *adapter = netdev_priv(netdev);
- struct sxg_hw_regs *HwRegs = adapter->HwRegs;
- struct sxg_ucode_regs *UcodeRegs = adapter->UcodeRegs;
- u32 *buff = p;
-
- memset(p, 0, (sizeof(struct sxg_hw_regs)+sizeof(struct sxg_ucode_regs)));
- memcpy(buff, HwRegs, sizeof(struct sxg_hw_regs));
- memcpy((buff+sizeof(struct sxg_hw_regs)), UcodeRegs, sizeof(struct sxg_ucode_regs));
-}
-
-static int sxg_nic_get_eeprom_len(struct net_device *netdev)
-{
- return (USER_VIEWABLE_EEPROM_SIZE);
-}
-
-static int sxg_nic_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct adapter_t *adapter = netdev_priv(netdev);
- struct sw_cfg_data *data;
- unsigned long i, status;
- dma_addr_t p_addr;
-
- data = pci_alloc_consistent(adapter->pcidev, sizeof(struct sw_cfg_data),
- &p_addr);
- if(!data) {
- /*
- * We cant get even this much memory. Raise a hell
- * Get out of here
- */
- printk(KERN_ERR"%s : Could not allocate memory for reading \
- EEPROM\n", __func__);
- return -ENOMEM;
- }
-
- WRITE_REG(adapter->UcodeRegs[0].ConfigStat, SXG_CFG_TIMEOUT, TRUE);
- WRITE_REG64(adapter, adapter->UcodeRegs[0].Config, p_addr, 0);
- for(i=0; i<1000; i++) {
- READ_REG(adapter->UcodeRegs[0].ConfigStat, status);
- if (status != SXG_CFG_TIMEOUT)
- break;
- mdelay(1); /* Do we really need this */
- }
-
- memset(bytes, 0, eeprom->len);
- memcpy(bytes, data->MacAddr[0].MacAddr, sizeof(struct sxg_config_mac));
- memcpy(bytes+6, data->AtkFru.PartNum, 6);
- memcpy(bytes+12, data->AtkFru.Revision, 2);
- memcpy(bytes+14, data->AtkFru.Serial, 14);
-
- return 0;
-}
-
-const struct ethtool_ops sxg_nic_ethtool_ops = {
- .get_settings = sxg_nic_get_settings,
- .set_settings = sxg_nic_set_settings,
- .get_drvinfo = sxg_nic_get_drvinfo,
- .get_regs_len = sxg_nic_get_regs_len,
- .get_regs = sxg_nic_get_regs,
- .get_link = ethtool_op_get_link,
-// .get_wol = sxg_nic_get_wol,
- .get_eeprom_len = sxg_nic_get_eeprom_len,
- .get_eeprom = sxg_nic_get_eeprom,
-// .get_pauseparam = sxg_nic_get_pauseparam,
-// .set_pauseparam = sxg_nic_set_pauseparam,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
-// .get_tso = sxg_nic_get_tso,
-// .set_tso = sxg_nic_set_tso,
-// .self_test = sxg_nic_diag_test,
- .get_strings = sxg_nic_get_strings,
- .get_ethtool_stats = sxg_nic_get_ethtool_stats,
- .get_sset_count = sxg_nic_get_sset_count,
- .get_rx_csum = sxg_nic_get_rx_csum,
- .set_rx_csum = sxg_nic_set_rx_csum,
-// .get_coalesce = sxg_nic_get_intr_coalesce,
-// .set_coalesce = sxg_nic_set_intr_coalesce,
-};
diff --git a/drivers/staging/sxg/sxg_os.h b/drivers/staging/sxg/sxg_os.h
deleted file mode 100644
index 68e1a04..0000000
--- a/drivers/staging/sxg/sxg_os.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/**************************************************************************
- *
- * Copyright (C) 2000-2008 Alacritech, Inc. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The views and conclusions contained in the software and documentation
- * are those of the authors and should not be interpreted as representing
- * official policies, either expressed or implied, of Alacritech, Inc.
- *
- **************************************************************************/
-
-/*
- * FILENAME: sxg_os.h
- *
- * These are the Linux-specific definitions required for the SLICOSS
- * driver, which should allow for greater portability to other OSes.
- */
-#ifndef _SLIC_OS_SPECIFIC_H_
-#define _SLIC_OS_SPECIFIC_H_
-
-#define FALSE (0)
-#define TRUE (1)
-
-struct list_entry {
- struct list_entry *nle_flink;
- struct list_entry *nle_blink;
-};
-
-#define InitializeListHead(l) \
- (l)->nle_flink = (l)->nle_blink = (l)
-
-#define IsListEmpty(h) \
- ((h)->nle_flink == (h))
-
-#define RemoveEntryList(e) \
- do { \
- list_entry *b; \
- list_entry *f; \
- \
- f = (e)->nle_flink; \
- b = (e)->nle_blink; \
- b->nle_flink = f; \
- f->nle_blink = b; \
- } while (0)
-
-/* These two have to be inlined since they return things. */
-
-static inline struct list_entry *RemoveHeadList(struct list_entry *l)
-{
- struct list_entry *f;
- struct list_entry *e;
-
- e = l->nle_flink;
- f = e->nle_flink;
- l->nle_flink = f;
- f->nle_blink = l;
-
- return (e);
-}
-
-static inline struct list_entry *RemoveTailList(struct list_entry *l)
-{
- struct list_entry *b;
- struct list_entry *e;
-
- e = l->nle_blink;
- b = e->nle_blink;
- l->nle_blink = b;
- b->nle_flink = l;
-
- return (e);
-}
-
-#define InsertTailList(l, e) \
- do { \
- struct list_entry *b; \
- \
- b = (l)->nle_blink; \
- (e)->nle_flink = (l); \
- (e)->nle_blink = b; \
- b->nle_flink = (e); \
- (l)->nle_blink = (e); \
- } while (0)
-
-#define InsertHeadList(l, e) \
- do { \
- struct list_entry *f; \
- \
- f = (l)->nle_flink; \
- (e)->nle_flink = f; \
- (e)->nle_blink = l; \
- f->nle_blink = (e); \
- (l)->nle_flink = (e); \
- } while (0)
-
-#define ATK_DEBUG 1
-
-#if ATK_DEBUG
-#define SLIC_TIMESTAMP(value) { \
- struct timeval timev; \
- do_gettimeofday(&timev); \
- value = timev.tv_sec*1000000 + timev.tv_usec; \
-}
-#else
-#define SLIC_TIMESTAMP(value)
-#endif
-
-/* SXG DEFINES */
-
-#ifdef ATKDBG
-#define SXG_TIMESTAMP(value) { \
- struct timeval timev; \
- do_gettimeofday(&timev); \
- value = timev.tv_sec*1000000 + timev.tv_usec; \
-}
-#else
-#define SXG_TIMESTAMP(value)
-#endif
-
-#define WRITE_REG(reg,value,flush) \
- sxg_reg32_write((®), (value), (flush))
-#define WRITE_REG64(a,reg,value,cpu) \
- sxg_reg64_write((a),(®),(value),(cpu))
-#define READ_REG(reg,value) (value) = readl((void __iomem *)(®))
-
-#endif /* _SLIC_OS_SPECIFIC_H_ */
diff --git a/drivers/staging/sxg/sxgdbg.h b/drivers/staging/sxg/sxgdbg.h
deleted file mode 100644
index e613a97..0000000
--- a/drivers/staging/sxg/sxgdbg.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/**************************************************************************
- *
- * Copyright © 2000-2008 Alacritech, Inc. All rights reserved.
- *
- * $Id: sxgdbg.h,v 1.1 2008/06/27 12:49:28 mook Exp $
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The views and conclusions contained in the software and documentation
- * are those of the authors and should not be interpreted as representing
- * official policies, either expressed or implied, of Alacritech, Inc.
- *
- **************************************************************************/
-
-/*
- * FILENAME: sxgdbg.h
- *
- * All debug and assertion-based definitions and macros are included
- * in this file for the SXGOSS driver.
- */
-#ifndef _SXG_DEBUG_H_
-#define _SXG_DEBUG_H_
-
-#define ATKDBG 1
-#define ATK_TRACE_ENABLED 0
-
-#define DBG_ERROR(n, args...) printk(KERN_WARNING n, ##args)
-
-#ifdef ASSERT
-#undef ASSERT
-#endif
-
-#define SXG_ASSERT_ENABLED
-#ifdef SXG_ASSERT_ENABLED
-#ifndef ASSERT
-#define ASSERT(a) \
- { \
- if (!(a)) { \
- DBG_ERROR("ASSERT() Failure: file %s, function %s line %d\n", \
- __FILE__, __func__, __LINE__); \
- } \
- }
-#endif
-#else
-#ifndef ASSERT
-#define ASSERT(a)
-#endif
-#endif /* SXG_ASSERT_ENABLED */
-
-
-#ifdef ATKDBG
-/*
- * Global for timer granularity; every driver must have an instance
- * of this initialized to 0
- */
-
-extern ulong ATKTimerDiv;
-
-/*
- * trace_entry -
- *
- * This structure defines an entry in the trace buffer. The
- * first few fields mean the same from entry to entry, while
- * the meaning of last several fields change to suit the
- * needs of the trace entry. Typically they are function call
- * parameters.
- */
-struct trace_entry {
- char name[8];/* 8 character name - like 's'i'm'b'a'r'c'v' */
- u32 time; /* Current clock tic */
- unsigned char cpu; /* Current CPU */
- unsigned char irql; /* Current IRQL */
- unsigned char driver;/* The driver which added the trace call */
- /* pad to 4 byte boundary - will probably get used */
- unsigned char pad2;
- u32 arg1; /* Caller arg1 */
- u32 arg2; /* Caller arg2 */
- u32 arg3; /* Caller arg3 */
- u32 arg4; /* Caller arg4 */
-};
-
-/* Driver types for driver field in struct trace_entry */
-#define TRACE_SXG 1
-#define TRACE_VPCI 2
-#define TRACE_SLIC 3
-
-#define TRACE_ENTRIES 1024
-
-struct sxg_trace_buffer {
- /* aid for windbg extension */
- unsigned int size;
- unsigned int in; /* Where to add */
- unsigned int level; /* Current Trace level */
- spinlock_t lock; /* For MP tracing */
- struct trace_entry entries[TRACE_ENTRIES];/* The circular buffer */
-};
-
-/*
- * The trace levels
- *
- * XXX At the moment I am only defining critical, important, and noisy.
- * I am leaving room for more if anyone wants them.
- */
-#define TRACE_NONE 0 /* For trace level - if no tracing wanted */
-#define TRACE_CRITICAL 1 /* minimal tracing - only critical stuff */
-#define TRACE_IMPORTANT 5 /* more tracing - anything important */
-#define TRACE_NOISY 10 /* Everything in the world */
-
-
-/* The macros themselves */
-#if ATK_TRACE_ENABLED
-#define SXG_TRACE_INIT(buffer, tlevel) \
-{ \
- memset((buffer), 0, sizeof(struct sxg_trace_buffer)); \
- (buffer)->level = (tlevel); \
- (buffer)->size = TRACE_ENTRIES; \
- spin_lock_init(&(buffer)->lock); \
-}
-#else
-#define SXG_TRACE_INIT(buffer, tlevel)
-#endif
-
-/*The trace macro. This is active only if ATK_TRACE_ENABLED is set. */
-#if ATK_TRACE_ENABLED
-#define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4) { \
- if ((buffer) && ((buffer)->level >= (tlevel))) { \
- unsigned int trace_irql = 0;/* ?????? FIX THIS */\
- unsigned int trace_len; \
- struct trace_entry *trace_entry; \
- struct timeval timev; \
- if(spin_trylock(&(buffer)->lock)) { \
- trace_entry = &(buffer)->entries[(buffer)->in]; \
- do_gettimeofday(&timev); \
- \
- memset(trace_entry->name, 0, 8); \
- trace_len = strlen(tname); \
- trace_len = trace_len > 8 ? 8 : trace_len; \
- memcpy(trace_entry->name, (tname), trace_len); \
- trace_entry->time = timev.tv_usec; \
- trace_entry->cpu = (unsigned char)(smp_processor_id() & 0xFF);\
- trace_entry->driver = (tdriver); \
- trace_entry->irql = trace_irql; \
- trace_entry->arg1 = (ulong)(a1); \
- trace_entry->arg2 = (ulong)(a2); \
- trace_entry->arg3 = (ulong)(a3); \
- trace_entry->arg4 = (ulong)(a4); \
- \
- (buffer)->in++; \
- if ((buffer)->in == TRACE_ENTRIES) \
- (buffer)->in = 0; \
- \
- spin_unlock(&(buffer)->lock); \
- } \
- } \
-}
-#else
-#define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4)
-#endif
-
-#endif
-
-#endif /* _SXG_DEBUG_H_ */
diff --git a/drivers/staging/sxg/sxghif.h b/drivers/staging/sxg/sxghif.h
deleted file mode 100644
index e190d6a..0000000
--- a/drivers/staging/sxg/sxghif.h
+++ /dev/null
@@ -1,1014 +0,0 @@
-/*******************************************************************
- * Copyright © 1997-2007 Alacritech, Inc. All rights reserved
- *
- * $Id: sxghif.h,v 1.5 2008/07/24 19:18:22 chris Exp $
- *
- * sxghif.h:
- *
- * This file contains structures and definitions for the
- * Alacritech Sahara host interface
- ******************************************************************/
-
-#define DBG 1
-
-/* UCODE Registers */
-struct sxg_ucode_regs {
- /* Address 0 - 0x3F = Command codes 0-15 for TCB 0. Excode 0 */
- u32 Icr; /* Code = 0 (extended), ExCode = 0 - Int control */
- u32 RsvdReg1; /* Code = 1 - TOE -NA */
- u32 RsvdReg2; /* Code = 2 - TOE -NA */
- u32 RsvdReg3; /* Code = 3 - TOE -NA */
- u32 RsvdReg4; /* Code = 4 - TOE -NA */
- u32 RsvdReg5; /* Code = 5 - TOE -NA */
- u32 CardUp; /* Code = 6 - Microcode initialized when 1 */
- u32 RsvdReg7; /* Code = 7 - TOE -NA */
- u32 ConfigStat; /* Code = 8 - Configuration data load status */
- u32 RsvdReg9; /* Code = 9 - TOE -NA */
- u32 CodeNotUsed[6]; /* Codes 10-15 not used. ExCode = 0 */
- /* This brings us to ExCode 1 at address 0x40 = Interrupt status pointer */
- u32 Isp; /* Code = 0 (extended), ExCode = 1 */
- u32 PadEx1[15]; /* Codes 1-15 not used with extended codes */
- /* ExCode 2 = Interrupt Status Register */
- u32 Isr; /* Code = 0 (extended), ExCode = 2 */
- u32 PadEx2[15];
- /* ExCode 3 = Event base register. Location of event rings */
- u32 EventBase; /* Code = 0 (extended), ExCode = 3 */
- u32 PadEx3[15];
- /* ExCode 4 = Event ring size */
- u32 EventSize; /* Code = 0 (extended), ExCode = 4 */
- u32 PadEx4[15];
- /* ExCode 5 = TCB Buffers base address */
- u32 TcbBase; /* Code = 0 (extended), ExCode = 5 */
- u32 PadEx5[15];
- /* ExCode 6 = TCB Composite Buffers base address */
- u32 TcbCompBase; /* Code = 0 (extended), ExCode = 6 */
- u32 PadEx6[15];
- /* ExCode 7 = Transmit ring base address */
- u32 XmtBase; /* Code = 0 (extended), ExCode = 7 */
- u32 PadEx7[15];
- /* ExCode 8 = Transmit ring size */
- u32 XmtSize; /* Code = 0 (extended), ExCode = 8 */
- u32 PadEx8[15];
- /* ExCode 9 = Receive ring base address */
- u32 RcvBase; /* Code = 0 (extended), ExCode = 9 */
- u32 PadEx9[15];
- /* ExCode 10 = Receive ring size */
- u32 RcvSize; /* Code = 0 (extended), ExCode = 10 */
- u32 PadEx10[15];
- /* ExCode 11 = Read EEPROM/Flash Config */
- u32 Config; /* Code = 0 (extended), ExCode = 11 */
- u32 PadEx11[15];
- /* ExCode 12 = Multicast bits 31:0 */
- u32 McastLow; /* Code = 0 (extended), ExCode = 12 */
- u32 PadEx12[15];
- /* ExCode 13 = Multicast bits 63:32 */
- u32 McastHigh; /* Code = 0 (extended), ExCode = 13 */
- u32 PadEx13[15];
- /* ExCode 14 = Ping */
- u32 Ping; /* Code = 0 (extended), ExCode = 14 */
- u32 PadEx14[15];
- /* ExCode 15 = Link MTU */
- u32 LinkMtu; /* Code = 0 (extended), ExCode = 15 */
- u32 PadEx15[15];
- /* ExCode 16 = Download synchronization */
- u32 LoadSync; /* Code = 0 (extended), ExCode = 16 */
- u32 PadEx16[15];
- /* ExCode 17 = Upper DRAM address bits on 32-bit systems */
- u32 Upper; /* Code = 0 (extended), ExCode = 17 */
- u32 PadEx17[15];
- /* ExCode 18 = Slowpath Send Index Address */
- u32 SPSendIndex; /* Code = 0 (extended), ExCode = 18 */
- u32 PadEx18[15];
- /* ExCode 19 = Get ucode statistics */
- u32 GetUcodeStats; /* Code = 0 (extended), ExCode = 19 */
- u32 PadEx19[15];
- /* ExCode 20 = Aggregation - See sxgmisc.c:SxgSetInterruptAggregation */
- u32 Aggregation; /* Code = 0 (extended), ExCode = 20 */
- u32 PadEx20[15];
- /* ExCode 21 = Receive MDL push timer */
- u32 PushTicks; /* Code = 0 (extended), ExCode = 21 */
- u32 PadEx21[15];
- /* ExCode 22 = ACK Frequency */
- u32 AckFrequency; /* Code = 0 (extended), ExCode = 22 */
- u32 PadEx22[15];
- /* ExCode 23 = TOE NA */
- u32 RsvdReg23;
- u32 PadEx23[15];
- /* ExCode 24 = TOE NA */
- u32 RsvdReg24;
- u32 PadEx24[15];
- /* ExCode 25 = TOE NA */
- u32 RsvdReg25; /* Code = 0 (extended), ExCode = 25 */
- u32 PadEx25[15];
- /* ExCode 26 = Receive checksum requirements */
- u32 ReceiveChecksum; /* Code = 0 (extended), ExCode = 26 */
- u32 PadEx26[15];
- /* ExCode 27 = RSS Requirements */
- u32 Rss; /* Code = 0 (extended), ExCode = 27 */
- u32 PadEx27[15];
- /* ExCode 28 = RSS Table */
- u32 RssTable; /* Code = 0 (extended), ExCode = 28 */
- u32 PadEx28[15];
- /* ExCode 29 = Event ring release entries */
- u32 EventRelease; /* Code = 0 (extended), ExCode = 29 */
- u32 PadEx29[15];
- /* ExCode 30 = Number of receive bufferlist commands on ring 0 */
- u32 RcvCmd; /* Code = 0 (extended), ExCode = 30 */
- u32 PadEx30[15];
- /* ExCode 31 = slowpath transmit command - Data[31:0] = 1 */
- u32 XmtCmd; /* Code = 0 (extended), ExCode = 31 */
- u32 PadEx31[15];
- /* ExCode 32 = Dump command */
- u32 DumpCmd; /* Code = 0 (extended), ExCode = 32 */
- u32 PadEx32[15];
- /* ExCode 33 = Debug command */
- u32 DebugCmd; /* Code = 0 (extended), ExCode = 33 */
- u32 PadEx33[15];
- /*
- * There are 128 possible extended commands - each of account for 16
- * words (including the non-relevent base command codes 1-15).
- * Pad for the remainder of these here to bring us to the next CPU
- * base. As extended codes are added, reduce the first array value in
- * the following field
- */
- u32 PadToNextCpu[94][16]; /* 94 = 128 - 34 (34 = Excodes 0 - 33)*/
-};
-
-/* Interrupt control register (0) values */
-#define SXG_ICR_DISABLE 0x00000000
-#define SXG_ICR_ENABLE 0x00000001
-#define SXG_ICR_MASK 0x00000002
-#define SXG_ICR_MSGID_MASK 0xFFFF0000
-#define SXG_ICR_MSGID_SHIFT 16
-#define SXG_ICR(_MessageId, _Data) \
- ((((_MessageId) << SXG_ICR_MSGID_SHIFT) & \
- SXG_ICR_MSGID_MASK) | (_Data))
-
-#define SXG_MIN_AGG_DEFAULT 0x0010 /* Minimum aggregation default */
-#define SXG_MAX_AGG_DEFAULT 0x0040 /* Maximum aggregation default */
-#define SXG_MAX_AGG_SHIFT 16 /* Maximum in top 16 bits of register */
-/* Disable interrupt aggregation on xmt */
-#define SXG_AGG_XMT_DISABLE 0x80000000
-
-/* The Microcode supports up to 16 RSS queues (RevB) */
-#define SXG_MAX_RSS 16
-#define SXG_MAX_RSS_REVA 8
-
-#define SXG_MAX_RSS_TABLE_SIZE 256 /* 256-byte max */
-
-#define SXG_RSS_REVA_TCP6 0x00000001 /* RSS TCP over IPv6 */
-#define SXG_RSS_REVA_TCP4 0x00000002 /* RSS TCP over IPv4 */
-#define SXG_RSS_IP 0x00000001 /* RSS TCP over IPv6 */
-#define SXG_RSS_TCP 0x00000002 /* RSS TCP over IPv4 */
-#define SXG_RSS_LEGACY 0x00000004 /* Line-base interrupts */
-#define SXG_RSS_TABLE_SIZE 0x0000FF00 /* Table size mask */
-
-#define SXG_RSS_TABLE_SHIFT 8
-#define SXG_RSS_BASE_CPU 0x00FF0000 /* Base CPU (not used) */
-#define SXG_RSS_BASE_SHIFT 16
-
-#define SXG_RCV_IP_CSUM_ENABLED 0x00000001 /* ExCode 26 (ReceiveChecksum) */
-#define SXG_RCV_TCP_CSUM_ENABLED 0x00000002 /* ExCode 26 (ReceiveChecksum) */
-
-#define SXG_XMT_CPUID_SHIFT 16
-
-/*
- * Status returned by ucode in the ConfigStat reg (see above) when attempted
- * to load configuration data from the EEPROM/Flash.
- */
-#define SXG_CFG_TIMEOUT 1 /* init value - timeout if unchanged */
-#define SXG_CFG_LOAD_EEPROM 2 /* config data loaded from EEPROM */
-#define SXG_CFG_LOAD_FLASH 3 /* config data loaded from flash */
-#define SXG_CFG_LOAD_INVALID 4 /* no valid config data found */
-#define SXG_CFG_LOAD_ERROR 5 /* hardware error */
-
-#define SXG_CHECK_FOR_HANG_TIME 5
-
-/*
- * TCB registers - This is really the same register memory area as UCODE_REGS
- * above, but defined differently. Bits 17:06 of the address define the TCB,
- * which means each TCB area occupies 0x40 (64) bytes, or 16 u32S. What really
- * is happening is that these registers occupy the "PadEx[15]" areas in the
- * struct sxg_ucode_regs definition above
- */
-struct sxg_tcb_regs {
- u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */
- u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */
- u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */
- u32 Rsvd1; /* Code = 3 - TOE NA */
- u32 Rsvd2; /* Code = 4 - TOE NA */
- u32 Rsvd3; /* Code = 5 - TOE NA */
- u32 Invalid1; /* Code = 6 - Reserved for "CardUp" see above */
- u32 Rsvd4; /* Code = 7 - TOE NA */
- u32 Invalid2; /* Code = 8 - Reserved for "ConfigStat" see above */
- u32 Rsvd5; /* Code = 9 - TOE NA */
- u32 Pad[6]; /* Codes 10-15 - Not used. */
-};
-
-/***************************************************************************
- * ISR Format
- * 31 0
- * _______________________________________
- * | | | | | | | | |
- * |____|____|____|____|____|____|____|____|
- * ^^^^ ^^^^ ^^^^ ^^^^ \ /
- * ERR --|||| |||| |||| |||| -----------------
- * EVENT ---||| |||| |||| |||| |
- * ----|| |||| |||| |||| |-- Crash Address
- * UPC -----| |||| |||| ||||
- * LEVENT -------|||| |||| ||||
- * PDQF --------||| |||| ||||
- * RMISS ---------|| |||| ||||
- * BREAK ----------| |||| ||||
- * HBEATOK ------------|||| ||||
- * NOHBEAT -------------||| ||||
- * ERFULL --------------|| ||||
- * XDROP ---------------| ||||
- * -----------------||||
- * -----------------||||--\
- * ||---|-CpuId of crash
- * |----/
- ***************************************************************************/
-#define SXG_ISR_ERR 0x80000000 /* Error */
-#define SXG_ISR_EVENT 0x40000000 /* Event ring event */
-#define SXG_ISR_NONE1 0x20000000 /* Not used */
-#define SXG_ISR_UPC 0x10000000 /* Dump/debug command complete*/
-#define SXG_ISR_LINK 0x08000000 /* Link event */
-#define SXG_ISR_PDQF 0x04000000 /* Processed data queue full */
-#define SXG_ISR_RMISS 0x02000000 /* Drop - no host buf */
-#define SXG_ISR_BREAK 0x01000000 /* Breakpoint hit */
-#define SXG_ISR_PING 0x00800000 /* Heartbeat response */
-#define SXG_ISR_DEAD 0x00400000 /* Card crash */
-#define SXG_ISR_ERFULL 0x00200000 /* Event ring full */
-#define SXG_ISR_XDROP 0x00100000 /* XMT Drop - no DRAM bufs or XMT err */
-#define SXG_ISR_SPSEND 0x00080000 /* Slow send complete */
-#define SXG_ISR_CPU 0x00070000 /* Dead CPU mask */
-#define SXG_ISR_CPU_SHIFT 16 /* Dead CPU shift */
-#define SXG_ISR_CRASH 0x0000FFFF /* Crash address mask */
-
-/***************************************************************************
- * Event Ring entry
- *
- * 31 15 0
- * .___________________.___________________.
- * |<------------ Pad 0 ------------>|
- * |_________|_________|_________|_________|0 0x00
- * |<------------ Pad 1 ------------>|
- * |_________|_________|_________|_________|4 0x04
- * |<------------ Pad 2 ------------>|
- * |_________|_________|_________|_________|8 0x08
- * |<----------- Event Word 0 ------------>|
- * |_________|_________|_________|_________|12 0x0c
- * |<----------- Event Word 1 ------------>|
- * |_________|_________|_________|_________|16 0x10
- * |<------------- Toeplitz ------------>|
- * |_________|_________|_________|_________|20 0x14
- * |<----- Length ---->|<------ TCB Id --->|
- * |_________|_________|_________|_________|24 0x18
- * |<----- Status ---->|Evnt Code|Flsh Code|
- * |_________|_________|_________|_________|28 0x1c
- * ^ ^^^^ ^^^^
- * |- VALID |||| ||||- RBUFC
- * |||| |||-- SLOWR
- * |||| ||--- UNUSED
- * |||| |---- FASTC
- * ||||------ FASTR
- * |||-------
- * ||--------
- * |---------
- *
- * Slowpath status:
- * _______________________________________
- * |<----- Status ---->|Evnt Code|Flsh Code|
- * |_________|Cmd Index|_________|_________|28 0x1c
- * ^^^ ^^^^
- * ||| ||||- ISTCPIP6
- * ||| |||-- IPONLY
- * ||| ||--- RCVERR
- * ||| |---- IPCBAD
- * |||------ TCPCBAD
- * ||------- ISTCPIP
- * |-------- SCERR
- *
- ************************************************************************/
-#pragma pack(push, 1)
-struct sxg_event {
- u32 Pad[1]; /* not used */
- u32 SndUna; /* SndUna value */
- u32 Resid; /* receive MDL resid */
- union {
- void * HostHandle; /* Receive host handle */
- u32 Rsvd1; /* TOE NA */
- struct {
- u32 NotUsed;
- u32 Rsvd2; /* TOE NA */
- } Flush;
- };
- u32 Toeplitz; /* RSS Toeplitz hash */
- union {
- ushort Rsvd3; /* TOE NA */
- ushort HdrOffset; /* Slowpath */
- };
- ushort Length;
- unsigned char Rsvd4; /* TOE NA */
- unsigned char Code; /* Event code */
- unsigned char CommandIndex; /* New ring index */
- unsigned char Status; /* Event status */
-};
-#pragma pack(pop)
-
-/* Event code definitions */
-#define EVENT_CODE_BUFFERS 0x01 /* Receive buffer list command (ring 0) */
-#define EVENT_CODE_SLOWRCV 0x02 /* Slowpath receive */
-#define EVENT_CODE_UNUSED 0x04 /* Was slowpath commands complete */
-
-/* Status values */
-#define EVENT_STATUS_VALID 0x80 /* Entry valid */
-
-/* Slowpath status */
-#define EVENT_STATUS_ERROR 0x40 /* Completed with error. Index in next byte */
-#define EVENT_STATUS_TCPIP4 0x20 /* TCPIPv4 frame */
-#define EVENT_STATUS_TCPBAD 0x10 /* Bad TCP checksum */
-#define EVENT_STATUS_IPBAD 0x08 /* Bad IP checksum */
-#define EVENT_STATUS_RCVERR 0x04 /* Slowpath receive error */
-#define EVENT_STATUS_IPONLY 0x02 /* IP frame */
-#define EVENT_STATUS_TCPIP6 0x01 /* TCPIPv6 frame */
-#define EVENT_STATUS_TCPIP 0x21 /* Combination of v4 and v6 */
-
-/*
- * Event ring
- * Size must be power of 2, between 128 and 16k
- */
-#define EVENT_RING_SIZE 4096
-#define EVENT_RING_BATCH 16 /* Hand entries back 16 at a time. */
-/* Stop processing events after 4096 (256 * 16) */
-#define EVENT_BATCH_LIMIT 256
-
-struct sxg_event_ring {
- struct sxg_event Ring[EVENT_RING_SIZE];
-};
-
-/* TCB Buffers */
-/* Maximum number of TCBS supported by hardware/microcode */
-#define SXG_MAX_TCB 4096
-/* Minimum TCBs before we fail initialization */
-#define SXG_MIN_TCB 512
-/*
- * TCB Hash
- * The bucket is determined by bits 11:4 of the toeplitz if we support 4k
- * offloaded connections, 10:4 if we support 2k and so on.
- */
-#define SXG_TCB_BUCKET_SHIFT 4
-#define SXG_TCB_PER_BUCKET 16
-#define SXG_TCB_BUCKET_MASK 0xFF0 /* Bucket portion of TCB ID */
-#define SXG_TCB_ELEMENT_MASK 0x00F /* Element within bucket */
-#define SXG_TCB_BUCKETS 256 /* 256 * 16 = 4k */
-
-#define SXG_TCB_BUFFER_SIZE 512 /* ASSERT format is correct */
-
-#define SXG_TCB_RCVQ_SIZE 736
-
-#define SXG_TCB_COMPOSITE_BUFFER_SIZE 1024
-
-#define SXG_LOCATE_TCP_FRAME_HDR(_TcpObject, _IPv6) \
- (((_TcpObject)->VlanId) ? \
- ((_IPv6) ? /* Vlan frame header = yes */ \
- &(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp6.SxgTcp: \
- &(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp.SxgTcp): \
- ((_IPv6) ? /* Vlan frame header = No */ \
- &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.SxgTcp : \
- &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp.SxgTcp))
-
-#define SXG_LOCATE_IP_FRAME_HDR(_TcpObject) \
- (_TcpObject)->VlanId ? \
- &(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp.Ip: \
- &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp.Ip
-
-#define SXG_LOCATE_IP6_FRAME_HDR(TcpObject) \
- (_TcpObject)->VlanId ? \
- &(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp6.Ip: \
- &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.Ip
-
-#if DBG
-/*
- * Horrible kludge to distinguish dumb-nic, slowpath, and
- * fastpath traffic. Decrement the HopLimit by one
- * for slowpath, two for fastpath. This assumes the limit is measurably
- * greater than two, which I think is reasonable.
- * Obviously this is DBG only. Maybe remove later, or #if 0 so we
- * can set it when needed
- */
-#define SXG_DBG_HOP_LIMIT(_TcpObject, _FastPath) { \
- PIPV6_HDR _Ip6FrameHdr; \
- if ((_TcpObject)->IPv6) { \
- _Ip6FrameHdr = SXG_LOCATE_IP6_FRAME_HDR((_TcpObject)); \
- if (_FastPath) { \
- _Ip6FrameHdr->HopLimit = \
- (_TcpObject)->Cached.TtlOrHopLimit - 2; \
- } else { \
- _Ip6FrameHdr->HopLimit = \
- (_TcpObject)->Cached.TtlOrHopLimit - 1; \
- } \
- } \
-}
-#else
-/* Do nothing with free build */
-#define SXG_DBG_HOP_LIMIT(_TcpObject, _FastPath)
-#endif
-
-/* Receive and transmit rings */
-#define SXG_MAX_RING_SIZE 256
-#define SXG_XMT_RING_SIZE 128 /* Start with 128 */
-#define SXG_RCV_RING_SIZE 128 /* Start with 128 */
-#define SXG_MAX_ENTRIES 4096
-#define SXG_JUMBO_RCV_RING_SIZE 32
-
-/* Structure and macros to manage a ring */
-struct sxg_ring_info {
- /* Where we add entries - Note unsigned char:RING_SIZE */
- unsigned char Head;
- unsigned char Tail; /* Where we pull off completed entries */
- ushort Size; /* Ring size - Must be multiple of 2 */
- void * Context[SXG_MAX_RING_SIZE]; /* Shadow ring */
-};
-
-#define SXG_INITIALIZE_RING(_ring, _size) { \
- (_ring).Head = 0; \
- (_ring).Tail = 0; \
- (_ring).Size = (_size); \
-}
-
-#define SXG_ADVANCE_INDEX(_index, _size) \
- ((_index) = ((_index) + 1) & ((_size) - 1))
-#define SXG_PREVIOUS_INDEX(_index, _size) \
- (((_index) - 1) &((_size) - 1))
-#define SXG_RING_EMPTY(_ring) ((_ring)->Head == (_ring)->Tail)
-#define SXG_RING_FULL(_ring) \
- ((((_ring)->Head + 1) & ((_ring)->Size - 1)) == (_ring)->Tail)
-#define SXG_RING_ADVANCE_HEAD(_ring) \
- SXG_ADVANCE_INDEX((_ring)->Head, ((_ring)->Size))
-#define SXG_RING_RETREAT_HEAD(_ring) ((_ring)->Head = \
- SXG_PREVIOUS_INDEX((_ring)->Head, (_ring)->Size))
-#define SXG_RING_ADVANCE_TAIL(_ring) { \
- ASSERT((_ring)->Tail != (_ring)->Head); \
- SXG_ADVANCE_INDEX((_ring)->Tail, ((_ring)->Size)); \
-}
-/*
- * Set cmd to the next available ring entry, set the shadow context
- * entry and advance the ring.
- * The appropriate lock must be held when calling this macro
- */
-#define SXG_GET_CMD(_ring, _ringinfo, _cmd, _context) { \
- if(SXG_RING_FULL(_ringinfo)) { \
- (_cmd) = NULL; \
- } else { \
- (_cmd) = &(_ring)->Descriptors[(_ringinfo)->Head]; \
- (_ringinfo)->Context[(_ringinfo)->Head] = (void *)(_context);\
- SXG_RING_ADVANCE_HEAD(_ringinfo); \
- } \
-}
-
-/*
- * Abort the previously allocated command by retreating the head.
- * NOTE - The appopriate lock MUST NOT BE DROPPED between the SXG_GET_CMD
- * and SXG_ABORT_CMD calls.
- */
-#define SXG_ABORT_CMD(_ringinfo) { \
- ASSERT(!(SXG_RING_EMPTY(_ringinfo))); \
- SXG_RING_RETREAT_HEAD(_ringinfo); \
- (_ringinfo)->Context[(_ringinfo)->Head] = NULL; \
-}
-
-/*
- * For the given ring, return a pointer to the tail cmd and context,
- * clear the context and advance the tail
- */
-#define SXG_RETURN_CMD(_ring, _ringinfo, _cmd, _context) { \
- (_cmd) = &(_ring)->Descriptors[(_ringinfo)->Tail]; \
- (_context) = (_ringinfo)->Context[(_ringinfo)->Tail]; \
- (_ringinfo)->Context[(_ringinfo)->Tail] = NULL; \
- SXG_RING_ADVANCE_TAIL(_ringinfo); \
-}
-
-/*
- * For a given ring find out how much the first pointer is ahead of
- * the second pointer. "ahead" recognises the fact that the ring can wrap
- */
-static inline int sxg_ring_get_forward_diff (struct sxg_ring_info *ringinfo,
- int a, int b) {
- if ((a < 0 || a > ringinfo->Size ) || (b < 0 || b > ringinfo->Size))
- return -1;
- if (a > b) /* _a is lagging _b and _b has not wrapped around */
- return (a - b);
- else
- return ((ringinfo->Size - (b - a)));
-}
-
-/***************************************************************
- * Host Command Buffer - commands to INIC via the Cmd Rings
- *
- * 31 15 0
- * .___________________.___________________.
- * |<-------------- Sgl Low -------------->|
- * |_________|_________|_________|_________|0 0x00
- * |<-------------- Sgl High ------------->|
- * |_________|_________|_________|_________|4 0x04
- * |<------------- Sge 0 Low ----------->|
- * |_________|_________|_________|_________|8 0x08
- * |<------------- Sge 0 High ----------->|
- * |_________|_________|_________|_________|12 0x0c
- * |<------------ Sge 0 Length ---------->|
- * |_________|_________|_________|_________|16 0x10
- * |<----------- Window Update ----------->|
- * |<-------- SP 1st SGE offset ---------->|
- * |_________|_________|_________|_________|20 0x14
- * |<----------- Total Length ------------>|
- * |_________|_________|_________|_________|24 0x18
- * |<----- LCnt ------>|<----- Flags ----->|
- * |_________|_________|_________|_________|28 0x1c
- ****************************************************************/
-#pragma pack(push, 1)
-struct sxg_cmd {
- dma64_addr_t Sgl; /* Physical address of SGL */
- union {
- struct {
- dma64_addr_t FirstSgeAddress; /* Address of first SGE */
- u32 FirstSgeLength; /* Length of first SGE */
- union {
- u32 Rsvd1; /* TOE NA */
- u32 SgeOffset; /* Slowpath - 2nd SGE offset */
- /* MDL completion - clobbers update */
- u32 Resid;
- };
- union {
- u32 TotalLength; /* Total transfer length */
- u32 Mss; /* LSO MSS */
- };
- } Buffer;
- };
- union {
- struct {
- unsigned char Flags:4; /* slowpath flags */
- unsigned char IpHl:4; /* Ip header length (>>2) */
- unsigned char MacLen; /* Mac header len */
- } CsumFlags;
- struct {
- ushort Flags:4; /* slowpath flags */
- ushort TcpHdrOff:7; /* TCP */
- ushort MacLen:5; /* Mac header len */
- } LsoFlags;
- ushort Flags; /* flags */
- };
- union {
- ushort SgEntries; /* SG entry count including first sge */
- struct {
- unsigned char Status; /* Copied from event status */
- unsigned char NotUsed;
- } Status;
- };
-};
-#pragma pack(pop)
-
-#pragma pack(push, 1)
-struct vlan_hdr {
- ushort VlanTci;
- ushort VlanTpid;
-};
-#pragma pack(pop)
-
-/********************************************************************
- * Slowpath Flags:
- *
- *
- * LSS Flags:
- * .---
- * /.--- TCP Large segment send
- * //.---
- * ///.---
- * 3 1 1 ////
- * 1 5 0 ||||
- * .___________________.____________vvvv.
- * | |MAC | TCP | |
- * | LCnt |hlen|hdroff|Flgs|
- * |___________________|||||||||||||____|
- *
- *
- * Checksum Flags
- *
- * .---
- * /.---
- * //.--- Checksum TCP
- * ///.--- Checksum IP
- * 3 1 //// No bits - normal send
- * 1 5 7 ||||
- * .___________________._______________vvvv.
- * | | Offload | IP | |
- * | LCnt |MAC hlen |Hlen|Flgs|
- * |___________________|____|____|____|____|
- *
- *****************************************************************/
-/* Slowpath CMD flags */
-#define SXG_SLOWCMD_CSUM_IP 0x01 /* Checksum IP */
-#define SXG_SLOWCMD_CSUM_TCP 0x02 /* Checksum TCP */
-#define SXG_SLOWCMD_LSO 0x04 /* Large segment send */
-
-struct sxg_xmt_ring {
- struct sxg_cmd Descriptors[SXG_XMT_RING_SIZE];
-};
-
-struct sxg_rcv_ring {
- struct sxg_cmd Descriptors[SXG_RCV_RING_SIZE];
-};
-
-/*
- * Share memory buffer types - Used to identify asynchronous
- * shared memory allocation
- */
-enum sxg_buffer_type {
- SXG_BUFFER_TYPE_RCV, /* Receive buffer */
- SXG_BUFFER_TYPE_SGL /* SGL buffer */
-};
-
-/* State for SXG buffers */
-#define SXG_BUFFER_FREE 0x01
-#define SXG_BUFFER_BUSY 0x02
-#define SXG_BUFFER_ONCARD 0x04
-#define SXG_BUFFER_UPSTREAM 0x08
-
-/*
- * Receive data buffers
- *
- * Receive data buffers are given to the Sahara card 128 at a time.
- * This is accomplished by filling in a "receive descriptor block"
- * with 128 "receive descriptors". Each descriptor consists of
- * a physical address, which the card uses as the address to
- * DMA data into, and a virtual address, which is given back
- * to the host in the "HostHandle" portion of an event.
- * The receive descriptor data structure is defined below
- * as sxg_rcv_data_descriptor, and the corresponding block
- * is defined as sxg_rcv_descriptor_block.
- *
- * This receive descriptor block is given to the card by filling
- * in the Sgl field of a sxg_cmd entry from pAdapt->RcvRings[0]
- * with the physical address of the receive descriptor block.
- *
- * Both the receive buffers and the receive descriptor blocks
- * require additional data structures to maintain them
- * on a free queue and contain other information associated with them.
- * Those data structures are defined as the sxg_rcv_data_buffer_hdr
- * and sxg_rcv_descriptor_block_hdr respectively.
- *
- * Since both the receive buffers and the receive descriptor block
- * must be accessible by the card, both must be allocated out of
- * shared memory. To ensure that we always have a descriptor
- * block available for every 128 buffers, we allocate all of
- * these resources together in a single block. This entire
- * block is managed by a struct sxg_rcv_block_hdr, who's sole purpose
- * is to maintain address information so that the entire block
- * can be free later.
- *
- * Further complicating matters is the fact that the receive
- * buffers must be variable in length in order to accomodate
- * jumbo frame configurations. We configure the buffer
- * length so that the buffer and it's corresponding struct
- * sxg_rcv_data_buffer_hdr structure add up to an even
- * boundary. Then we place the remaining data structures after 128
- * of them as shown in the following diagram:
- *
- * _________________________________________
- * | |
- * | Variable length receive buffer #1 |
- * |_________________________________________|
- * | |
- * | sxg_rcv_data_buffer_hdr #1 |
- * |_________________________________________| <== Even 2k or 10k boundary
- * | |
- * | ... repeat 2-128 .. |
- * |_________________________________________|
- * | |
- * | struct sxg_rcv_descriptor_block |
- * | Contains sxg_rcv_data_descriptor * 128 |
- * |_________________________________________|
- * | |
- * | struct sxg_rcv_descriptor_block_hdr |
- * |_________________________________________|
- * | |
- * | struct sxg_rcv_block_hdr |
- * |_________________________________________|
- *
- * Memory consumption:
- * Non-jumbo:
- * Buffers and sxg_rcv_data_buffer_hdr = 2k * 128 = 256k
- * + struct sxg_rcv_descriptor_block = 2k
- * + struct sxg_rcv_descriptor_block_hdr = ~32
- * + struct sxg_rcv_block_hdr = ~32
- * => Total = ~258k/block
- *
- * Jumbo:
- * Buffers and sxg_rcv_data_buffer_hdr = 10k * 128 = 1280k
- * + struct sxg_rcv_descriptor_block = 2k
- * + struct sxg_rcv_descriptor_block_hdr = ~32
- * + struct sxg_rcv_block_hdr = ~32
- * => Total = ~1282k/block
- *
- */
-#define SXG_RCV_DATA_BUFFERS 8192 /* Amount to give to the card */
-#define SXG_INITIAL_RCV_DATA_BUFFERS 16384 /* Initial pool of buffers */
-/* Minimum amount and when to get more */
-#define SXG_MIN_RCV_DATA_BUFFERS 4096
-#define SXG_MAX_RCV_BLOCKS 256 /* = 32k receive buffers */
-/* Amount to give to the card in case of jumbo frames */
-#define SXG_JUMBO_RCV_DATA_BUFFERS 2048
-/* Initial pool of buffers in case of jumbo buffers */
-#define SXG_INITIAL_JUMBO_RCV_DATA_BUFFERS 4096
-#define SXG_MIN_JUMBO_RCV_DATA_BUFFERS 1024
-
-/* Receive buffer header */
-struct sxg_rcv_data_buffer_hdr {
- dma64_addr_t PhysicalAddress; /* Buffer physical address */
- /*
- * Note - DO NOT USE the VirtualAddress field to locate data.
- * Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead.
- */
- struct list_entry FreeList; /* Free queue of buffers */
- unsigned char State; /* See SXG_BUFFER state above */
- struct sk_buff * skb; /* Double mapped (nbl and pkt)*/
-};
-
-/*
- * SxgSlowReceive uses the PACKET (skb) contained
- * in the struct sxg_rcv_data_buffer_hdr when indicating dumb-nic data
- */
-#define SxgDumbRcvPacket skb
-
-/* Space for struct sxg_rcv_data_buffer_hdr */
-#define SXG_RCV_DATA_HDR_SIZE sizeof(struct sxg_rcv_data_buffer_hdr)
-/* Non jumbo = 2k including HDR */
-#define SXG_RCV_DATA_BUFFER_SIZE 2048
-/* jumbo = 10k including HDR */
-#define SXG_RCV_JUMBO_BUFFER_SIZE 10240
-
-/* Receive data descriptor */
-struct sxg_rcv_data_descriptor {
- union {
- struct sk_buff *VirtualAddress; /* Host handle */
- u64 ForceTo8Bytes; /*Force x86 to 8-byte boundary*/
- };
- dma64_addr_t PhysicalAddress;
-};
-
-/* Receive descriptor block */
-#define SXG_RCV_DESCRIPTORS_PER_BLOCK 128
-#define SXG_RCV_DESCRIPTOR_BLOCK_SIZE 2048 /* For sanity check */
-
-struct sxg_rcv_descriptor_block {
- struct sxg_rcv_data_descriptor Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK];
-};
-
-/* Receive descriptor block header */
-struct sxg_rcv_descriptor_block_hdr {
- void *VirtualAddress; /* start of 2k buffer */
- dma64_addr_t PhysicalAddress;/* and it's physical address */
- struct list_entry FreeList;/* free queue of descriptor blocks */
- unsigned char State; /* see sxg_buffer state above */
-};
-
-/* Receive block header */
-struct sxg_rcv_block_hdr {
- void *VirtualAddress; /* Start of virtual memory */
- dma64_addr_t PhysicalAddress;/* ..and it's physical address*/
- struct list_entry AllList; /* Queue of all SXG_RCV_BLOCKS*/
-};
-
-/* Macros to determine data structure offsets into receive block */
-#define SXG_RCV_BLOCK_SIZE(_Buffersize) \
- (((_Buffersize) * SXG_RCV_DESCRIPTORS_PER_BLOCK) + \
- (sizeof(struct sxg_rcv_descriptor_block)) + \
- (sizeof(struct sxg_rcv_descriptor_block_hdr)) + \
- (sizeof(struct sxg_rcv_block_hdr)))
-#define SXG_RCV_BUFFER_DATA_SIZE(_Buffersize) \
- ((_Buffersize) - SXG_RCV_DATA_HDR_SIZE)
-#define SXG_RCV_DATA_BUFFER_HDR_OFFSET(_Buffersize) \
- ((_Buffersize) - SXG_RCV_DATA_HDR_SIZE)
-#define SXG_RCV_DESCRIPTOR_BLOCK_OFFSET(_Buffersize) \
- ((_Buffersize) * SXG_RCV_DESCRIPTORS_PER_BLOCK)
-#define SXG_RCV_DESCRIPTOR_BLOCK_HDR_OFFSET(_Buffersize) \
- (((_Buffersize) * SXG_RCV_DESCRIPTORS_PER_BLOCK) + \
- (sizeof(struct sxg_rcv_descriptor_block)))
-#define SXG_RCV_BLOCK_HDR_OFFSET(_Buffersize) \
- (((_Buffersize) * SXG_RCV_DESCRIPTORS_PER_BLOCK) + \
- (sizeof(struct sxg_rcv_descriptor_block)) + \
- (sizeof(struct sxg_rcv_descriptor_block_hdr)))
-
-/* Scatter gather list buffer */
-#define SXG_INITIAL_SGL_BUFFERS 8192 /* Initial pool of SGL buffers */
-#define SXG_MIN_SGL_BUFFERS 2048 /* Minimum amount and when to get more*/
-/* Maximum to allocate (note ADAPT:ushort) */
-#define SXG_MAX_SGL_BUFFERS 16384
-
-/*
- * SXG_SGL_POOL_PROPERTIES - This structure is used to define a pool of SGL
- * buffers. These buffers are allocated out of shared memory and used to
- * contain a physical scatter gather list structure that is shared
- * with the card.
- *
- * We split our SGL buffers into multiple pools based on size. The motivation
- * is that some applications perform very large I/Os (1MB for example), so
- * we need to be able to allocate an SGL to accommodate such a request.
- * But such an SGL would require 256 24-byte SG entries - ~6k.
- * Given that the vast majority of I/Os are much smaller than 1M, allocating
- * a single pool of SGL buffers would be a horribly inefficient use of
- * memory.
- *
- * The following structure includes two fields relating to its size.
- * The NBSize field specifies the largest NET_BUFFER that can be handled
- * by the particular pool. The SGEntries field defines the size, in
- * entries, of the SGL for that pool. The SGEntries is determined by
- * dividing the NBSize by the expected page size (4k), and then padding
- * it by some appropriate amount as insurance (20% or so..??).
- */
-struct sxg_sgl_pool_properties {
- u32 NBSize; /* Largest NET_BUFFER size for this pool */
- ushort SGEntries; /* Number of entries in SGL */
- ushort InitialBuffers; /* Number to allocate at initializationtime */
- ushort MinBuffers; /* When to get more */
- ushort MaxBuffers; /* When to stop */
- ushort PerCpuThreshold;/* See sxgh.h:SXG_RESOURCES */
-};
-
-/*
- * At the moment I'm going to statically initialize 4 pools:
- * 100k buffer pool: The vast majority of the expected buffers are expected
- * to be less than or equal to 100k. At 30 entries per and
- * 8k initial buffers amounts to ~4MB of memory
- * NOTE - This used to be 64K with 20 entries, but during
- * WHQL NDIS 6.0 Testing (2c_mini6stress) MS does their
- * best to send absurd NBL's with ridiculous SGLs, we
- * have received 400byte sends contained in SGL's that
- * have 28 entries
- * 1M buffer pool: Buffers between 64k and 1M. Allocate 256 initial
- * buffers with 300 entries each => ~2MB of memory
- * 5M buffer pool: Not expected often, if at all. 32 initial buffers
- * at 1500 entries each => ~1MB of memory
- * 10M buffer pool: Not expected at all, except under pathelogical conditions.
- * Allocate one at initialization time.
- * Note - 10M is the current limit of what we can realistically
- * support due to the sahara SGL bug described in the
- * SAHARA SGL WORKAROUND below. We will likely adjust the
- * number of pools and/or pool properties over time.
- */
-#define SXG_NUM_SGL_POOLS 4
-#define INITIALIZE_SGL_POOL_PROPERTIES \
-struct sxg_sgl_pool_properties SxgSglPoolProperties[SXG_NUM_SGL_POOLS] =\
-{ \
- { 102400, 30, 8192, 2048, 16384, 256}, \
- { 1048576, 300, 256, 128, 1024, 16}, \
- { 5252880, 1500, 32, 16, 512, 0}, \
- {10485760, 2700, 2, 4, 32, 0}, \
-};
-
-extern struct sxg_sgl_pool_properties SxgSglPoolProperties[];
-
-#define SXG_MAX_SGL_BUFFER_SIZE \
- SxgSglPoolProperties[SXG_NUM_SGL_POOLS - 1].NBSize
-
-/*
- * SAHARA SGL WORKAROUND!!
- * The current Sahara card uses a 16-bit counter when advancing
- * SGL address locations. This means that if an SGL crosses
- * a 64k boundary, the hardware will actually skip back to
- * the start of the previous 64k boundary, with obviously
- * undesirable results.
- *
- * We currently workaround this issue by allocating SGL buffers
- * in 64k blocks and skipping over buffers that straddle the boundary.
- */
-#define SXG_INVALID_SGL(phys_addr,len) \
- (((phys_addr >> 16) != ( (phys_addr + len) >> 16 )))
-
-/*
- * Allocate SGLs in blocks so we can skip over invalid entries.
- * We allocation 64k worth of SGL buffers, including the
- * struct sxg_sgl_block_hdr, plus one for padding
- */
-#define SXG_SGL_BLOCK_SIZE 65536
-#define SXG_SGL_ALLOCATION_SIZE(_Pool) \
- SXG_SGL_BLOCK_SIZE + SXG_SGL_SIZE(_Pool)
-
-struct sxg_sgl_block_hdr {
- ushort Pool; /* Associated SGL pool */
- /* struct sxg_scatter_gather blocks */
- struct list_entry List;
- dma64_addr_t PhysicalAddress;/* physical address */
-};
-
-/*
- * The following definition denotes the maximum block of memory that the
- * card can DMA to.It is specified in the call to NdisMRegisterScatterGatherDma.
- * For now, use the same value as used in the Slic/Oasis driver, which
- * is 128M. That should cover any expected MDL that I can think of.
- */
-#define SXG_MAX_PHYS_MAP (1024 * 1024 * 128)
-
-/* Self identifying structure type */
-enum SXG_SGL_TYPE {
- SXG_SGL_DUMB, /* Dumb NIC SGL */
- SXG_SGL_SLOW, /* Slowpath protocol header - see below */
- SXG_SGL_CHIMNEY /* Chimney offload SGL */
-};
-
-/*
- * The ucode expects an NDIS SGL structure that
- * is formatted for an x64 system. When running
- * on an x64 system, we can simply hand the NDIS SGL
- * to the card directly. For x86 systems we must reconstruct
- * the SGL. The following structure defines an x64
- * formatted SGL entry
- */
-struct sxg_x64_sge {
- dma64_addr_t Address; /* same as wdm.h */
- u32 Length; /* same as wdm.h */
- u32 CompilerPad; /* The compiler pads to 8-bytes */
- u64 Reserved; /* u32 * in wdm.h. Force to 8 bytes */
-};
-
-/*
- * Our SGL structure - Essentially the same as
- * wdm.h:SCATTER_GATHER_LIST. Note the variable number of
- * elements based on the pool specified above
- */
-struct sxg_x64_sgl {
- u32 NumberOfElements;
- u32 *Reserved;
- struct sxg_x64_sge Elements[1]; /* Variable */
-};
-
-struct sxg_scatter_gather {
- enum SXG_SGL_TYPE Type; /* FIRST! Dumb-nic or offload */
- ushort Pool; /* Associated SGL pool */
- ushort Entries; /* SGL total entries */
- void * adapter; /* Back pointer to adapter */
- /* Free struct sxg_scatter_gather blocks */
- struct list_entry FreeList;
- /* All struct sxg_scatter_gather blocks */
- struct list_entry AllList;
- dma64_addr_t PhysicalAddress;/* physical address */
- unsigned char State; /* See SXG_BUFFER state above */
- unsigned char CmdIndex; /* Command ring index */
- struct sk_buff *DumbPacket; /* Associated Packet */
- /* For asynchronous completions */
- u32 Direction;
- u32 CurOffset; /* Current SGL offset */
- u32 SglRef; /* SGL reference count */
- struct vlan_hdr VlanTag; /* VLAN tag to be inserted into SGL */
- struct sxg_x64_sgl *pSgl; /* SGL Addr. Possibly &Sgl */
- struct sxg_x64_sgl Sgl; /* SGL handed to card */
-};
-
-/*
- * Note - the "- 1" is because struct sxg_scatter_gather=>struct sxg_x64_sgl
- * includes 1 SGE..
- */
-#define SXG_SGL_SIZE(_Pool) \
- (sizeof(struct sxg_scatter_gather) + \
- ((SxgSglPoolProperties[_Pool].SGEntries - 1) * \
- sizeof(struct sxg_x64_sge)))
-
-/* Force NDIS to give us it's own buffer so we can reformat to our own */
-#define SXG_SGL_BUFFER(_SxgSgl) NULL
-#define SXG_SGL_BUFFER_LENGTH(_SxgSgl) 0
-#define SXG_SGL_BUF_SIZE 0
-
-/*
-#if defined(CONFIG_X86_64)
-#define SXG_SGL_BUFFER(_SxgSgl) (&_SxgSgl->Sgl)
-#define SXG_SGL_BUFFER_LENGTH(_SxgSgl) ((_SxgSgl)->Entries * \
- sizeof(struct sxg_x64_sge))
-#define SXG_SGL_BUF_SIZE sizeof(struct sxg_x64_sgl)
-#elif defined(CONFIG_X86)
-// Force NDIS to give us it's own buffer so we can reformat to our own
-#define SXG_SGL_BUFFER(_SxgSgl) NULL
-#define SXG_SGL_BUFFER_LENGTH(_SxgSgl) 0
-#define SXG_SGL_BUF_SIZE 0
-#else
-#error staging: sxg: driver is for X86 only!
-#endif
-*/
-/* Microcode statistics */
-struct sxg_ucode_stats {
- u32 RPDQOflow; /* PDQ overflow (unframed ie dq & drop 1st) */
- u32 XDrops; /* Xmt drops due to no xmt buffer */
- u32 ERDrops; /* Rcv drops due to ER full */
- u32 NBDrops; /* Rcv drops due to out of host buffers */
- u32 PQDrops; /* Rcv drops due to PDQ full */
- /* Rcv drops due to bad frame: no link addr match, frlen > max */
- u32 BFDrops;
- u32 UPDrops; /* Rcv drops due to UPFq full */
- u32 XNoBufs; /* Xmt drop due to no DRAM Xmit buffer or PxyBuf */
-};
-
-/*
- * Macros for handling the Offload engine values
- */
-/* Number of positions to shift Network Header Length before passing to card */
-#define SXG_NW_HDR_LEN_SHIFT 2
diff --git a/drivers/staging/sxg/sxghw.h b/drivers/staging/sxg/sxghw.h
deleted file mode 100644
index 81f81d4..0000000
--- a/drivers/staging/sxg/sxghw.h
+++ /dev/null
@@ -1,1020 +0,0 @@
-/*************************************************************
- * Copyright © 1997-2007 Alacritech, Inc. All rights reserved
- *
- * $Id: sxghw.h,v 1.2 2008/07/24 17:24:23 chris Exp $
- *
- * sxghw.h:
- *
- * This file contains structures and definitions for the
- * Alacritech Sahara hardware
- *
- **********************************************************/
-
-
-/* PCI Configuration space */
-/* PCI Vendor ID */
-#define SXG_VENDOR_ID 0x139A /* Alacritech's Vendor ID */
-
-/* PCI Device ID */
-#define SXG_DEVICE_ID 0x0009 /* Sahara Device ID */
-
-
-/* Type of ASIC in use */
-enum asic_type {
- SAHARA_REV_A,
- SAHARA_REV_B
-};
-
-/* Type of Xcvr in fiber card */
-enum xcvr_type {
- XCVR_UNKNOWN,
- XCVR_NONE,
- XCVR_SR,
- XCVR_LR,
- XCVR_LRM,
- XCVR_CR
-};
-/*
- * Subsystem IDs.
- *
- * The subsystem ID value is broken into bit fields as follows:
- * Bits [15:12] - Function
- * Bits [11:8] - OEM and/or operating system.
- * Bits [7:0] - Base SID.
- */
-
-/* SSID field (bit) masks */
-#define SSID_BASE_MASK 0x00FF /* Base subsystem ID mask */
-#define SSID_OEM_MASK 0x0F00 /* Subsystem OEM mask */
-#define SSID_FUNC_MASK 0xF000 /* Subsystem function mask */
-
-/* Base SSID's */
-/* 100022 Sahara prototype (XenPak) board */
-#define SSID_SAHARA_PROTO 0x0018
-#define SSID_SAHARA_FIBER 0x0019 /* 100023 Sahara 1-port fiber board */
-#define SSID_SAHARA_COPPER 0x001A /* 100024 Sahara 1-port copper board */
-
-/* Useful SSID macros */
-/* isolate base SSID bits */
-#define SSID_BASE(ssid) ((ssid) & SSID_BASE_MASK)
-/* isolate SSID OEM bits */
-#define SSID_OEM(ssid) ((ssid) & SSID_OEM_MASK)
-/* isolate SSID function bits */
-#define SSID_FUNC(ssid) ((ssid) & SSID_FUNC_MASK)
-
-
-/* HW Register Space */
-#define SXG_HWREG_MEMSIZE 0x4000 /* 16k */
-
-#pragma pack(push, 1)
-struct sxg_hw_regs {
- u32 Reset; /* Write 0xdead to invoke soft reset */
- u32 Pad1; /* No register defined at offset 4 */
- u32 InterruptMask0; /* Deassert legacy interrupt on function 0 */
- u32 InterruptMask1; /* Deassert legacy interrupt on function 1 */
- u32 UcodeDataLow; /* Store microcode instruction bits 31-0 */
- u32 UcodeDataMiddle; /* Store microcode instruction bits 63-32 */
- u32 UcodeDataHigh; /* Store microcode instruction bits 95-64 */
- u32 UcodeAddr; /* Store microcode address - See flags below */
- u32 PadTo0x80[24]; /* Pad to Xcv configuration registers */
- u32 MacConfig0; /* 0x80 - AXGMAC Configuration Register 0 */
- u32 MacConfig1; /* 0x84 - AXGMAC Configuration Register 1 */
- u32 MacConfig2; /* 0x88 - AXGMAC Configuration Register 2 */
- u32 MacConfig3; /* 0x8C - AXGMAC Configuration Register 3 */
- u32 MacAddressLow; /* 0x90 - AXGMAC MAC Station Address - octets 1-4 */
- u32 MacAddressHigh; /* 0x94 - AXGMAC MAC Station Address - octets 5-6 */
- u32 MacReserved1[2]; /* 0x98 - AXGMAC Reserved */
- u32 MacMaxFrameLen; /* 0xA0 - AXGMAC Maximum Frame Length */
- u32 MacReserved2[2]; /* 0xA4 - AXGMAC Reserved */
- u32 MacRevision; /* 0xAC - AXGMAC Revision Level Register */
- u32 MacReserved3[4]; /* 0xB0 - AXGMAC Reserved */
- u32 MacAmiimCmd; /* 0xC0 - AXGMAC AMIIM Command Register */
- u32 MacAmiimField; /* 0xC4 - AXGMAC AMIIM Field Register */
- u32 MacAmiimConfig; /* 0xC8 - AXGMAC AMIIM Configuration Register */
- u32 MacAmiimLink; /* 0xCC - AXGMAC AMIIM Link Fail Vector Register */
- u32 MacAmiimIndicator; /* 0xD0 - AXGMAC AMIIM Indicator Registor */
- u32 PadTo0x100[11]; /* 0xD4 - 0x100 - Pad */
- u32 XmtConfig; /* 0x100 - Transmit Configuration Register */
- u32 RcvConfig; /* 0x104 - Receive Configuration Register 1 */
- u32 LinkAddress0Low; /* 0x108 - Link address 0 */
- u32 LinkAddress0High; /* 0x10C - Link address 0 */
- u32 LinkAddress1Low; /* 0x110 - Link address 1 */
- u32 LinkAddress1High; /* 0x114 - Link address 1 */
- u32 LinkAddress2Low; /* 0x118 - Link address 2 */
- u32 LinkAddress2High; /* 0x11C - Link address 2 */
- u32 LinkAddress3Low; /* 0x120 - Link address 3 */
- u32 LinkAddress3High; /* 0x124 - Link address 3 */
- u32 ToeplitzKey[10]; /* 0x128 - 0x150 - Toeplitz key */
- u32 SocketKey[10]; /* 0x150 - 0x178 - Socket Key */
- u32 LinkStatus; /* 0x178 - Link status */
- u32 ClearStats; /* 0x17C - Clear Stats */
- u32 XmtErrorsLow; /* 0x180 - Transmit stats - errors */
- u32 XmtErrorsHigh; /* 0x184 - Transmit stats - errors */
- u32 XmtFramesLow; /* 0x188 - Transmit stats - frame count */
- u32 XmtFramesHigh; /* 0x18C - Transmit stats - frame count */
- u32 XmtBytesLow; /* 0x190 - Transmit stats - byte count */
- u32 XmtBytesHigh; /* 0x194 - Transmit stats - byte count */
- u32 XmtTcpSegmentsLow; /* 0x198 - Transmit stats - TCP segments */
- u32 XmtTcpSegmentsHigh; /* 0x19C - Transmit stats - TCP segments */
- u32 XmtTcpBytesLow; /* 0x1A0 - Transmit stats - TCP bytes */
- u32 XmtTcpBytesHigh; /* 0x1A4 - Transmit stats - TCP bytes */
- u32 RcvErrorsLow; /* 0x1A8 - Receive stats - errors */
- u32 RcvErrorsHigh; /* 0x1AC - Receive stats - errors */
- u32 RcvFramesLow; /* 0x1B0 - Receive stats - frame count */
- u32 RcvFramesHigh; /* 0x1B4 - Receive stats - frame count */
- u32 RcvBytesLow; /* 0x1B8 - Receive stats - byte count */
- u32 RcvBytesHigh; /* 0x1BC - Receive stats - byte count */
- u32 RcvTcpSegmentsLow; /* 0x1C0 - Receive stats - TCP segments */
- u32 RcvTcpSegmentsHigh; /* 0x1C4 - Receive stats - TCP segments */
- u32 RcvTcpBytesLow; /* 0x1C8 - Receive stats - TCP bytes */
- u32 RcvTcpBytesHigh; /* 0x1CC - Receive stats - TCP bytes */
- u32 PadTo0x200[12]; /* 0x1D0 - 0x200 - Pad */
- u32 Software[1920]; /* 0x200 - 0x2000 - Software defined (not used) */
- u32 MsixTable[1024]; /* 0x2000 - 0x3000 - MSIX Table */
- u32 MsixBitArray[1024]; /* 0x3000 - 0x4000 - MSIX Pending Bit Array */
-};
-#pragma pack(pop)
-
-/* Microcode Address Flags */
-#define MICROCODE_ADDRESS_GO 0x80000000 /* Start microcode */
-#define MICROCODE_ADDRESS_WRITE 0x40000000 /* Store microcode */
-#define MICROCODE_ADDRESS_READ 0x20000000 /* Read microcode */
-#define MICROCODE_ADDRESS_PARITY 0x10000000/* Parity error detected */
-#define MICROCODE_ADDRESS_MASK 0x00001FFF /* Address bits */
-
-/* Link Address Registers */
-/* Applied to link address high */
-#define LINK_ADDRESS_ENABLE 0x80000000
-
-/* Microsoft register space size */
-#define SXG_UCODEREG_MEMSIZE 0x40000 /* 256k */
-
-/*
- * Sahara microcode register address format. The command code,
- * extended command code, and associated processor are encoded in
- * the address bits as follows
- */
-#define SXG_ADDRESS_CODE_SHIFT 2 /* Base command code */
-#define SXG_ADDRESS_CODE_MASK 0x0000003C
-/* Extended (or sub) command code */
-#define SXG_ADDRESS_EXCODE_SHIFT 6
-#define SXG_ADDRESS_EXCODE_MASK 0x00001FC0
-#define SXG_ADDRESS_CPUID_SHIFT 13 /* CPU */
-#define SXG_ADDRESS_CPUID_MASK 0x0003E000
-/* Used to sanity check UCODE_REGS structure */
-#define SXG_REGISTER_SIZE_PER_CPU 0x00002000
-
-/* Sahara receive sequencer status values */
-#define SXG_RCV_STATUS_ATTN 0x80000000 /* Attention */
-#define SXG_RCV_STATUS_TRANSPORT_MASK 0x3F000000 /* Transport mask */
-#define SXG_RCV_STATUS_TRANSPORT_ERROR 0x20000000 /* Transport error */
-/* Transport cksum error */
-#define SXG_RCV_STATUS_TRANSPORT_CSUM 0x23000000
-/* Transport underflow */
-#define SXG_RCV_STATUS_TRANSPORT_UFLOW 0x22000000
- /* Transport header length */
-#define SXG_RCV_STATUS_TRANSPORT_HDRLEN 0x20000000
-/* Transport flags detected */
-#define SXG_RCV_STATUS_TRANSPORT_FLAGS 0x10000000
- /* Transport options detected */
-#define SXG_RCV_STATUS_TRANSPORT_OPTS 0x08000000
-#define SXG_RCV_STATUS_TRANSPORT_SESS_MASK 0x07000000 /* Transport DDP */
-#define SXG_RCV_STATUS_TRANSPORT_DDP 0x06000000 /* Transport DDP */
-#define SXG_RCV_STATUS_TRANSPORT_iSCSI 0x05000000 /* Transport iSCSI */
-#define SXG_RCV_STATUS_TRANSPORT_NFS 0x04000000 /* Transport NFS */
-#define SXG_RCV_STATUS_TRANSPORT_FTP 0x03000000 /* Transport FTP */
-#define SXG_RCV_STATUS_TRANSPORT_HTTP 0x02000000 /* Transport HTTP */
-#define SXG_RCV_STATUS_TRANSPORT_SMB 0x01000000 /* Transport SMB */
-#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 /* Network mask */
-#define SXG_RCV_STATUS_NETWORK_ERROR 0x00800000 /* Network error */
-/* Network cksum error */
-#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000
-/* Network underflow error */
-#define SXG_RCV_STATUS_NETWORK_UFLOW 0x00820000
- /* Network header length */
-#define SXG_RCV_STATUS_NETWORK_HDRLEN 0x00800000
- /* Network overflow detected */
-#define SXG_RCV_STATUS_NETWORK_OFLOW 0x00400000
-/* Network multicast detected */
-#define SXG_RCV_STATUS_NETWORK_MCAST 0x00200000
-/* Network options detected */
-#define SXG_RCV_STATUS_NETWORK_OPTIONS 0x00100000
-/* Network offset detected */
-#define SXG_RCV_STATUS_NETWORK_OFFSET 0x00080000
-/* Network fragment detected */
-#define SXG_RCV_STATUS_NETWORK_FRAGMENT 0x00040000
-/* Network transport type mask */
-#define SXG_RCV_STATUS_NETWORK_TRANS_MASK 0x00030000
-#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 /* UDP */
-#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 /* TCP */
-#define SXG_RCV_STATUS_IPONLY 0x00008000 /* IP-only not TCP */
-/* Receive priority */
-#define SXG_RCV_STATUS_PKT_PRI 0x00006000
-/* Receive priority shift */
-#define SXG_RCV_STATUS_PKT_PRI_SHFT 13
-/* MAC Receive RAM parity error */
-#define SXG_RCV_STATUS_PARITY 0x00001000
-/* Link address detection mask */
-#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00
-
-#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 /* Link address D */
-#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 /* Link address C */
-#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 /* Link address B */
-#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 /* Link address A */
-/* Link address broadcast */
-#define SXG_RCV_STATUS_ADDRESS_BCAST 0x00000300
- /* Link address multicast */
-#define SXG_RCV_STATUS_ADDRESS_MCAST 0x00000200
-/* Link control multicast */
-#define SXG_RCV_STATUS_ADDRESS_CMCAST 0x00000100
-/* Link status mask */
-#define SXG_RCV_STATUS_LINK_MASK 0x000000FF
-#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 /* Link error */
-/* Link status mask */
-#define SXG_RCV_STATUS_LINK_MASK 0x000000FF
-/* RcvMacQ parity error */
-#define SXG_RCV_STATUS_LINK_PARITY 0x00000087
-#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 /* Data early */
-#define SXG_RCV_STATUS_LINK_BUFOFLOW 0x00000085 /* Buffer overflow */
-#define SXG_RCV_STATUS_LINK_CODE 0x00000084 /* Link code error */
-#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 /* Dribble nibble */
-#define SXG_RCV_STATUS_LINK_CRC 0x00000082 /* CRC error */
-#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 /* Link overflow */
-#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 /* Link underflow */
-#define SXG_RCV_STATUS_LINK_8023 0x00000020 /* 802.3 */
-#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 /* Snap */
-#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 /* VLAN */
-/* Network type mask */
-#define SXG_RCV_STATUS_LINK_TYPE_MASK 0x00000007
-#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 /* Control packet */
-#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 /* IPv6 packet */
-#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 /* IPv4 packet */
-
-/* Sahara receive and transmit configuration registers */
-/* RcvConfig register reset */
-#define RCV_CONFIG_RESET 0x80000000
-/* Enable the receive logic */
-#define RCV_CONFIG_ENABLE 0x40000000
-/* Enable the receive parser */
-#define RCV_CONFIG_ENPARSE 0x20000000
-/* Enable the socket detector */
-#define RCV_CONFIG_SOCKET 0x10000000
-#define RCV_CONFIG_RCVBAD 0x08000000 /* Receive all bad frames */
-/* Receive all control frames */
-#define RCV_CONFIG_CONTROL 0x04000000
-/* Enable pause transmit when attn */
-#define RCV_CONFIG_RCVPAUSE 0x02000000
-/* Include TCP port w/ IPv6 toeplitz */
-#define RCV_CONFIG_TZIPV6 0x01000000
-/* Include TCP port w/ IPv4 toeplitz */
-#define RCV_CONFIG_TZIPV4 0x00800000
-#define RCV_CONFIG_FLUSH 0x00400000 /* Flush buffers */
-#define RCV_CONFIG_PRIORITY_MASK 0x00300000 /* Priority level */
-#define RCV_CONFIG_CONN_MASK 0x000C0000 /* Number of connections */
-#define RCV_CONFIG_CONN_4K 0x00000000 /* 4k connections */
-#define RCV_CONFIG_CONN_2K 0x00040000 /* 2k connections */
-#define RCV_CONFIG_CONN_1K 0x00080000 /* 1k connections */
-#define RCV_CONFIG_CONN_512 0x000C0000 /* 512 connections */
-#define RCV_CONFIG_HASH_MASK 0x00030000 /* Hash depth */
-#define RCV_CONFIG_HASH_8 0x00000000 /* Hash depth 8 */
-#define RCV_CONFIG_HASH_16 0x00010000 /* Hash depth 16 */
-#define RCV_CONFIG_HASH_4 0x00020000 /* Hash depth 4 */
-#define RCV_CONFIG_HASH_2 0x00030000 /* Hash depth 2 */
-/* Buffer length bits 15:4. ie multiple of 16. */
-#define RCV_CONFIG_BUFLEN_MASK 0x0000FFE0
-/* Disable socket detection on attn */
-#define RCV_CONFIG_SKT_DIS 0x00000008
-#define RCV_CONFIG_HIPRICTL 0x00000002 /* Ctrl frames on high-prioirty RcvQ */
-#define RCV_CONFIG_NEWSTATUSFMT 0x00000001 /* Use RevB status format */
-/*
- * Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size.
- * We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC,
- * and round up to nearest 32 byte boundary
- */
-#define RCV_CONFIG_BUFSIZE(_MaxFrame) \
- ((((_MaxFrame) + 22) + 31) & RCV_CONFIG_BUFLEN_MASK)
-
-/* XmtConfig register reset */
-#define XMT_CONFIG_RESET 0x80000000
-#define XMT_CONFIG_ENABLE 0x40000000 /* Enable transmit logic */
-/* Inhibit MAC RAM parity error */
-#define XMT_CONFIG_MAC_PARITY 0x20000000
-/* Inhibit D2F buffer parity error */
-#define XMT_CONFIG_BUF_PARITY 0x10000000
-/* Inhibit 1T SRAM parity error */
-#define XMT_CONFIG_MEM_PARITY 0x08000000
-#define XMT_CONFIG_INVERT_PARITY 0x04000000 /* Invert MAC RAM parity */
-#define XMT_CONFIG_INITIAL_IPID 0x0000FFFF /* Initial IPID */
-
-/*
- * A-XGMAC Registers - Occupy 0x80 - 0xD4 of the struct sxg_hw_regs
- *
- * Full register descriptions can be found in axgmac.pdf
- */
-/* A-XGMAC Configuration Register 0 */
-#define AXGMAC_CFG0_SUB_RESET 0x80000000 /* Sub module reset */
-#define AXGMAC_CFG0_RCNTRL_RESET 0x00400000 /* Receive control reset */
-#define AXGMAC_CFG0_RFUNC_RESET 0x00200000 /* Receive function reset */
-#define AXGMAC_CFG0_TCNTRL_RESET 0x00040000 /* Transmit control reset */
-#define AXGMAC_CFG0_TFUNC_RESET 0x00020000 /* Transmit function reset */
-#define AXGMAC_CFG0_MII_RESET 0x00010000 /* MII Management reset */
-
-/* A-XGMAC Configuration Register 1 */
-/* Allow the sending of Pause frames */
-#define AXGMAC_CFG1_XMT_PAUSE 0x80000000
-#define AXGMAC_CFG1_XMT_EN 0x40000000 /* Enable transmit */
-/* Allow the detection of Pause frames */
-#define AXGMAC_CFG1_RCV_PAUSE 0x20000000
-#define AXGMAC_CFG1_RCV_EN 0x10000000 /* Enable receive */
-/* Current transmit state - READ ONLY */
-#define AXGMAC_CFG1_XMT_STATE 0x04000000
-/* Current receive state - READ ONLY */
-#define AXGMAC_CFG1_RCV_STATE 0x01000000
-/* Only pause for 64 slot on XOFF */
-#define AXGMAC_CFG1_XOFF_SHORT 0x00001000
-/* Delay transmit FCS 1 4-byte word */
-#define AXGMAC_CFG1_XMG_FCS1 0x00000400
-/* Delay transmit FCS 2 4-byte words */
-#define AXGMAC_CFG1_XMG_FCS2 0x00000800
-/* Delay transmit FCS 3 4-byte words */
-#define AXGMAC_CFG1_XMG_FCS3 0x00000C00
-/* Delay receive FCS 1 4-byte word */
-#define AXGMAC_CFG1_RCV_FCS1 0x00000100
-/* Delay receive FCS 2 4-byte words */
-#define AXGMAC_CFG1_RCV_FCS2 0x00000200
-/* Delay receive FCS 3 4-byte words */
-#define AXGMAC_CFG1_RCV_FCS3 0x00000300
-/* Per-packet override enable */
-#define AXGMAC_CFG1_PKT_OVERRIDE 0x00000080
-#define AXGMAC_CFG1_SWAP 0x00000040 /* Byte swap enable */
-/* ASSERT srdrpfrm on short frame (<64) */
-#define AXGMAC_CFG1_SHORT_ASSERT 0x00000020
-/* RCV only 802.3AE when CLEAR */
-#define AXGMAC_CFG1_RCV_STRICT 0x00000010
-#define AXGMAC_CFG1_CHECK_LEN 0x00000008 /* Verify frame length */
-#define AXGMAC_CFG1_GEN_FCS 0x00000004 /* Generate FCS */
-#define AXGMAC_CFG1_PAD_MASK 0x00000003 /* Mask for pad bits */
-#define AXGMAC_CFG1_PAD_64 0x00000001 /* Pad frames to 64 bytes */
-/* Detect VLAN and pad to 68 bytes */
-#define AXGMAC_CFG1_PAD_VLAN 0x00000002
-#define AXGMAC_CFG1_PAD_68 0x00000003 /* Pad to 68 bytes */
-
-/* A-XGMAC Configuration Register 2 */
-/* Generate single pause frame (test) */
-#define AXGMAC_CFG2_GEN_PAUSE 0x80000000
-/* Manual link fault sequence */
-#define AXGMAC_CFG2_LF_MANUAL 0x08000000
-/* Auto link fault sequence */
-#define AXGMAC_CFG2_LF_AUTO 0x04000000
-/* Remote link fault (READ ONLY) */
-#define AXGMAC_CFG2_LF_REMOTE 0x02000000
-/* Local link fault (READ ONLY) */
-#define AXGMAC_CFG2_LF_LOCAL 0x01000000
-#define AXGMAC_CFG2_IPG_MASK 0x001F0000 /* Inter packet gap */
-#define AXGMAC_CFG2_IPG_SHIFT 16
-#define AXGMAC_CFG2_PAUSE_XMT 0x00008000 /* Pause transmit module */
-/* Enable IPG extension algorithm */
-#define AXGMAC_CFG2_IPG_EXTEN 0x00000020
-#define AXGMAC_CFG2_IPGEX_MASK 0x0000001F /* IPG extension */
-
-/* A-XGMAC Configuration Register 3 */
-/* Receive frame drop filter */
-#define AXGMAC_CFG3_RCV_DROP 0xFFFF0000
-/* Receive frame don't care filter */
-#define AXGMAC_CFG3_RCV_DONT_CARE 0x0000FFFF
-
-/* A-XGMAC Station Address Register - Octets 1-4 */
-#define AXGMAC_SARLOW_OCTET_ONE 0xFF000000 /* First octet */
-#define AXGMAC_SARLOW_OCTET_TWO 0x00FF0000 /* Second octet */
-#define AXGMAC_SARLOW_OCTET_THREE 0x0000FF00 /* Third octet */
-#define AXGMAC_SARLOW_OCTET_FOUR 0x000000FF /* Fourth octet */
-
-/* A-XGMAC Station Address Register - Octets 5-6 */
-#define AXGMAC_SARHIGH_OCTET_FIVE 0xFF000000 /* Fifth octet */
-#define AXGMAC_SARHIGH_OCTET_SIX 0x00FF0000 /* Sixth octet */
-
-/* A-XGMAC Maximum frame length register */
-/* Maximum transmit frame length */
-#define AXGMAC_MAXFRAME_XMT 0x3FFF0000
-#define AXGMAC_MAXFRAME_XMT_SHIFT 16
-/* Maximum receive frame length */
-#define AXGMAC_MAXFRAME_RCV 0x0000FFFF
-/*
- * This register doesn't need to be written for standard MTU.
- * For jumbo, I'll just statically define the value here. This
- * value sets the receive byte count to 9036 (0x234C) and the
- * transmit WORD count to 2259 (0x8D3). These values include 22
- * bytes of padding beyond the jumbo MTU of 9014
- */
-#define AXGMAC_MAXFRAME_JUMBO 0x08D3234C
-
-/* A-XGMAC Revision level */
-#define AXGMAC_REVISION_MASK 0x0000FFFF /* Revision level */
-
-/* A-XGMAC AMIIM Command Register */
-#define AXGMAC_AMIIM_CMD_START 0x00000008 /* Command start */
-#define AXGMAC_AMIIM_CMD_MASK 0x00000007 /* Command */
-/* 10/100/1000 Mbps Phy Write */
-#define AXGMAC_AMIIM_CMD_LEGACY_WRITE 1
-/* 10/100/1000 Mbps Phy Read */
-#define AXGMAC_AMIIM_CMD_LEGACY_READ 2
-#define AXGMAC_AMIIM_CMD_MONITOR_SINGLE 3 /* Monitor single PHY */
-/* Monitor multiple contiguous PHYs */
-#define AXGMAC_AMIIM_CMD_MONITOR_MULTIPLE 4
-/* Present AMIIM Field Reg */
-#define AXGMAC_AMIIM_CMD_10G_OPERATION 5
-/* Clear Link Fail Bit in MIIM */
-#define AXGMAC_AMIIM_CMD_CLEAR_LINK_FAIL 6
-
-/* A-XGMAC AMIIM Field Register */
-#define AXGMAC_AMIIM_FIELD_ST 0xC0000000 /* 2-bit ST field */
-#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30
-#define AXGMAC_AMIIM_FIELD_OP 0x30000000 /* 2-bit OP field */
-#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28
-/* Port address field (hstphyadx in spec) */
-#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000
-#define AXGMAC_AMIIM_FIELD_PORT_SHIFT 23
-/* Device address field (hstregadx in spec) */
-#define AXGMAC_AMIIM_FIELD_DEV_ADDR 0x007C0000
-#define AXGMAC_AMIIM_FIELD_DEV_SHIFT 18
-#define AXGMAC_AMIIM_FIELD_TA 0x00030000 /* 2-bit TA field */
-#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16
-#define AXGMAC_AMIIM_FIELD_DATA 0x0000FFFF /* Data field */
-
-/* Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register */
-#define MIIM_OP_ADDR 0 /* MIIM Address set operation */
-#define MIIM_OP_WRITE 1 /* MIIM Write register operation */
-#define MIIM_OP_READ 2 /* MIIM Read register operation */
-#define MIIM_OP_ADDR_SHIFT (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT)
-
-/*
- * Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM
- * Field Register
- */
-#define MIIM_PORT_NUM 1 /* All Sahara MIIM modules use port 1 */
-
-/*
- * Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM
- * Field Register
- */
-/* PHY PMA/PMD module MIIM device number */
-#define MIIM_DEV_PHY_PMA 1
-/* PHY PCS module MIIM device number */
-#define MIIM_DEV_PHY_PCS 3
-/* PHY XS module MIIM device number */
-#define MIIM_DEV_PHY_XS 4
-#define MIIM_DEV_XGXS 5 /* XGXS MIIM device number */
-
-/*
- * Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field
- * Register
- */
-#define MIIM_TA_10GB 2 /* set to 2 for 10 GB operation */
-
-/* A-XGMAC AMIIM Configuration Register */
-/* Bypass preamble of mngmt frame */
-#define AXGMAC_AMIIM_CFG_NOPREAM 0x00000080
-/* half-clock duration of MDC output */
-#define AXGMAC_AMIIM_CFG_HALF_CLOCK 0x0000007F
-
-/* A-XGMAC AMIIM Indicator Register */
-/* Link status from legacy PHY or MMD */
-#define AXGMAC_AMIIM_INDC_LINK 0x00000010
-/* Multiple phy operation in progress */
-#define AXGMAC_AMIIM_INDC_MPHY 0x00000008
-/* Single phy operation in progress */
-#define AXGMAC_AMIIM_INDC_SPHY 0x00000004
-/* Single or multiple monitor cmd */
-#define AXGMAC_AMIIM_INDC_MON 0x00000002
-/* Set until cmd operation complete */
-#define AXGMAC_AMIIM_INDC_BUSY 0x00000001
-
-/* Link Status and Control Register */
-#define LS_PHY_CLR_RESET 0x80000000 /* Clear reset signal to PHY */
-#define LS_SERDES_POWER_DOWN 0x40000000 /* Power down the Sahara Serdes */
-#define LS_XGXS_ENABLE 0x20000000 /* Enable the XAUI XGXS logic */
-/* Hold XAUI XGXS logic reset until Serdes is up */
-#define LS_XGXS_CTL 0x10000000
-/* When 0, XAUI Serdes is up and initialization is complete */
-#define LS_SERDES_DOWN 0x08000000
-/* When 0, Trace Serdes is up and initialization is complete */
-#define LS_TRACE_DOWN 0x04000000
-/* Set PHY clock to 25 MHz (else 156.125 MHz) */
-#define LS_PHY_CLK_25MHZ 0x02000000
-#define LS_PHY_CLK_EN 0x01000000 /* Enable clock to PHY */
-#define LS_XAUI_LINK_UP 0x00000010 /* XAUI link is up */
-/* XAUI link status has changed */
-#define LS_XAUI_LINK_CHNG 0x00000008
-#define LS_LINK_ALARM 0x00000004 /* Link alarm pin */
-/* Mask link attention control bits */
-#define LS_ATTN_CTRL_MASK 0x00000003
-#define LS_ATTN_ALARM 0x00000000 /* 00 => Attn on link alarm */
-/* 01 => Attn on link alarm or status change */
-#define LS_ATTN_ALARM_OR_STAT_CHNG 0x00000001
-/* 10 => Attn on link status change */
-#define LS_ATTN_STAT_CHNG 0x00000002
-#define LS_ATTN_NONE 0x00000003 /* 11 => no Attn */
-
-/* Link Address High Registers */
-#define LINK_ADDR_ENABLE 0x80000000 /* Enable this link address */
-
-
-/*
- * XGXS XAUI XGMII Extender registers
- *
- * Full register descriptions can be found in mxgxs.pdf
- */
-/* XGXS Register Map */
-#define XGXS_ADDRESS_CONTROL1 0x0000 /* XS Control 1 */
-#define XGXS_ADDRESS_STATUS1 0x0001 /* XS Status 1 */
-#define XGXS_ADDRESS_DEVID_LOW 0x0002 /* XS Device ID (low) */
-#define XGXS_ADDRESS_DEVID_HIGH 0x0003 /* XS Device ID (high) */
-#define XGXS_ADDRESS_SPEED 0x0004 /* XS Speed ability */
-#define XGXS_ADDRESS_DEV_LOW 0x0005 /* XS Devices in package */
-#define XGXS_ADDRESS_DEV_HIGH 0x0006 /* XS Devices in package */
-#define XGXS_ADDRESS_STATUS2 0x0008 /* XS Status 2 */
-#define XGXS_ADDRESS_PKGID_lOW 0x000E /* XS Package Identifier */
-#define XGXS_ADDRESS_PKGID_HIGH 0x000F /* XS Package Identifier */
-#define XGXS_ADDRESS_LANE_STATUS 0x0018 /* 10G XGXS Lane Status */
-#define XGXS_ADDRESS_TEST_CTRL 0x0019 /* 10G XGXS Test Control */
-#define XGXS_ADDRESS_RESET_LO1 0x8000 /* Vendor-Specific Reset Lo 1 */
-#define XGXS_ADDRESS_RESET_LO2 0x8001 /* Vendor-Specific Reset Lo 2 */
-#define XGXS_ADDRESS_RESET_HI1 0x8002 /* Vendor-Specific Reset Hi 1 */
-#define XGXS_ADDRESS_RESET_HI2 0x8003 /* Vendor-Specific Reset Hi 2 */
-
-/* XS Control 1 register bit definitions */
-#define XGXS_CONTROL1_RESET 0x8000 /* Reset - self clearing */
-#define XGXS_CONTROL1_LOOPBACK 0x4000 /* Enable loopback */
-#define XGXS_CONTROL1_SPEED1 0x2000 /* 0 = unspecified, 1 = 10Gb+ */
-#define XGXS_CONTROL1_LOWPOWER 0x0400 /* 1 = Low power mode */
-#define XGXS_CONTROL1_SPEED2 0x0040 /* Same as SPEED1 (?) */
-/* Everything reserved except zero (?) */
-#define XGXS_CONTROL1_SPEED 0x003C
-
-/* XS Status 1 register bit definitions */
-#define XGXS_STATUS1_FAULT 0x0080 /* Fault detected */
-#define XGXS_STATUS1_LINK 0x0004 /* 1 = Link up */
-#define XGXS_STATUS1_LOWPOWER 0x0002 /* 1 = Low power supported */
-
-/* XS Speed register bit definitions */
-#define XGXS_SPEED_10G 0x0001 /* 1 = 10G capable */
-
-/* XS Devices register bit definitions */
-#define XGXS_DEVICES_DTE 0x0020 /* DTE XS Present */
-#define XGXS_DEVICES_PHY 0x0010 /* PHY XS Present */
-#define XGXS_DEVICES_PCS 0x0008 /* PCS Present */
-#define XGXS_DEVICES_WIS 0x0004 /* WIS Present */
-#define XGXS_DEVICES_PMD 0x0002 /* PMD/PMA Present */
-#define XGXS_DEVICES_CLAUSE22 0x0001 /* Clause 22 registers present*/
-
-/* XS Devices High register bit definitions */
-#define XGXS_DEVICES_VENDOR2 0x8000 /* Vendor specific device 2 */
-#define XGXS_DEVICES_VENDOR1 0x4000 /* Vendor specific device 1 */
-
-/* XS Status 2 register bit definitions */
-#define XGXS_STATUS2_DEV_MASK 0xC000 /* Device present mask */
-#define XGXS_STATUS2_DEV_RESPOND 0x8000 /* Device responding */
-#define XGXS_STATUS2_XMT_FAULT 0x0800 /* Transmit fault */
-#define XGXS_STATUS2_RCV_FAULT 0x0400 /* Receive fault */
-
-/* XS Package ID High register bit definitions */
-#define XGXS_PKGID_HIGH_ORG 0xFC00 /* Organizationally Unique */
-#define XGXS_PKGID_HIGH_MFG 0x03F0 /* Manufacturer Model */
-#define XGXS_PKGID_HIGH_REV 0x000F /* Revision Number */
-
-/* XS Lane Status register bit definitions */
-#define XGXS_LANE_PHY 0x1000 /* PHY/DTE lane alignment status */
-#define XGXS_LANE_PATTERN 0x0800 /* Pattern testing ability */
-#define XGXS_LANE_LOOPBACK 0x0400 /* PHY loopback ability */
-#define XGXS_LANE_SYNC3 0x0008 /* Lane 3 sync */
-#define XGXS_LANE_SYNC2 0x0004 /* Lane 2 sync */
-#define XGXS_LANE_SYNC1 0x0002 /* Lane 1 sync */
-#define XGXS_LANE_SYNC0 0x0001 /* Lane 0 sync */
-
-/* XS Test Control register bit definitions */
-#define XGXS_TEST_PATTERN_ENABLE 0x0004 /* Test pattern enabled */
-#define XGXS_TEST_PATTERN_MASK 0x0003 /* Test patterns */
-#define XGXS_TEST_PATTERN_RSVD 0x0003 /* Test pattern - reserved */
-#define XGXS_TEST_PATTERN_MIX 0x0002 /* Test pattern - mixed */
-#define XGXS_TEST_PATTERN_LOW 0x0001 /* Test pattern - low */
-#define XGXS_TEST_PATTERN_HIGH 0x0001 /* Test pattern - high */
-
-/*
- * External MDIO Bus Registers
- *
- * Full register descriptions can be found in PHY/XENPAK/IEEE specs
- */
-/*
- * LASI (Link Alarm Status Interrupt) Registers (located in
- * MIIM_DEV_PHY_PMA device)
- */
-#define LASI_RX_ALARM_CONTROL 0x9000 /* LASI RX_ALARM Control */
-#define LASI_TX_ALARM_CONTROL 0x9001 /* LASI TX_ALARM Control */
-#define LASI_CONTROL 0x9002 /* LASI Control */
-#define LASI_RX_ALARM_STATUS 0x9003 /* LASI RX_ALARM Status */
-#define LASI_TX_ALARM_STATUS 0x9004 /* LASI TX_ALARM Status */
-#define LASI_STATUS 0x9005 /* LASI Status */
-
-/* LASI_CONTROL bit definitions */
-/* Enable RX_ALARM interrupts */
-#define LASI_CTL_RX_ALARM_ENABLE 0x0004
-/* Enable TX_ALARM interrupts */
-#define LASI_CTL_TX_ALARM_ENABLE 0x0002
-/* Enable Link Status interrupts */
-#define LASI_CTL_LS_ALARM_ENABLE 0x0001
-
-/* LASI_STATUS bit definitions */
-#define LASI_STATUS_RX_ALARM 0x0004 /* RX_ALARM status */
-#define LASI_STATUS_TX_ALARM 0x0002 /* TX_ALARM status */
-#define LASI_STATUS_LS_ALARM 0x0001 /* Link Status */
-
-/* PHY registers - PMA/PMD (device 1) */
-#define PHY_PMA_CONTROL1 0x0000 /* PMA/PMD Control 1 */
-#define PHY_PMA_STATUS1 0x0001 /* PMA/PMD Status 1 */
-#define PHY_PMA_RCV_DET 0x000A /* PMA/PMD Receive Signal Detect */
- /* other PMA/PMD registers exist and can be defined as needed */
-
-/* PHY registers - PCS (device 3) */
-#define PHY_PCS_CONTROL1 0x0000 /* PCS Control 1 */
-#define PHY_PCS_STATUS1 0x0001 /* PCS Status 1 */
-#define PHY_PCS_10G_STATUS1 0x0020 /* PCS 10GBASE-R Status 1 */
- /* other PCS registers exist and can be defined as needed */
-
-/* PHY registers - XS (device 4) */
-#define PHY_XS_CONTROL1 0x0000 /* XS Control 1 */
-#define PHY_XS_STATUS1 0x0001 /* XS Status 1 */
-#define PHY_XS_LANE_STATUS 0x0018 /* XS Lane Status */
- /* other XS registers exist and can be defined as needed */
-
-/* PHY_PMA_CONTROL1 register bit definitions */
-#define PMA_CONTROL1_RESET 0x8000 /* PMA/PMD reset */
-
-/* PHY_PMA_RCV_DET register bit definitions */
-#define PMA_RCV_DETECT 0x0001 /* PMA/PMD receive signal detect */
-
-/* PHY_PCS_10G_STATUS1 register bit definitions */
-#define PCS_10B_BLOCK_LOCK 0x0001 /* PCS 10GBASE-R locked to receive blocks */
-
-/* PHY_XS_LANE_STATUS register bit definitions */
-#define XS_LANE_ALIGN 0x1000 /* XS transmit lanes aligned */
-
-#define XCVR_VENDOR_LEN 16 /* xcvr vendor len */
-#define XCVR_MODEL_LEN 16 /* xcvr model len */
-
-/* PHY Microcode download data structure */
-struct phy_ucode {
- ushort Addr;
- ushort Data;
-};
-
-/* Slow Bus Register Definitions */
-
-/* Module 0 registers */
-#define GPIO_L_IN 0x15 /* GPIO input (low) */
-#define GPIO_L_OUT 0x16 /* GPIO output (low) */
-#define GPIO_L_DIR 0x17 /* GPIO direction (low) */
-#define GPIO_H_IN 0x19 /* GPIO input (high) */
-#define GPIO_H_OUT 0x1A /* GPIO output (high) */
-#define GPIO_H_DIR 0x1B /* GPIO direction (high) */
-
-/* Definitions for other slow bus registers can be added as needed */
-
-
-/*
- * Transmit Sequencer Command Descriptor definitions
- *
- * This descriptor must be placed in GRAM. The address of this descriptor
- * (along with a couple of control bits) is pushed onto the PxhCmdQ or PxlCmdQ
- * (Proxy high or low command queue). This data is read by the Proxy Sequencer,
- * which pushes it onto the XmtCmdQ, which is (eventually) read by the Transmit
- * Sequencer, causing a packet to be transmitted. Not all fields are valid for
- * all commands - see the Sahara spec for details. Note that this structure is
- * only valid when compiled on a little endian machine.
- */
-#pragma pack(push, 1)
-struct xmt_desc {
- ushort XmtLen; /* word 0, bits [15:0] - transmit length */
- /* word 0, bits [23:16] - transmit control byte */
- unsigned char XmtCtl;
- /* word 0, bits [31:24] - transmit command plus misc. */
- unsigned char Cmd;
- /* word 1, bits [31:0] - transmit buffer ID */
- u32 XmtBufId;
- /* word 2, bits [7:0] - byte address of TCP header */
- unsigned char TcpStrt;
- /* word 2, bits [15:8] - byte address of IP header */
- unsigned char IpStrt;
- /* word 2, bits [31:16] - partial IP checksum */
- ushort IpCkSum;
- /* word 3, bits [15:0] - partial TCP checksum */
- ushort TcpCkSum;
- ushort Rsvd1; /* word 3, bits [31:16] - PAD */
- u32 Rsvd2; /* word 4, bits [31:0] - PAD */
- u32 Rsvd3; /* word 5, bits [31:0] - PAD */
- u32 Rsvd4; /* word 6, bits [31:0] - PAD */
- u32 Rsvd5; /* word 7, bits [31:0] - PAD */
-};
-#pragma pack(pop)
-
-/* struct xmt_desc Cmd byte definitions */
- /* command codes */
-#define XMT_DESC_CMD_RAW_SEND 0 /* raw send descriptor */
-#define XMT_DESC_CMD_CSUM_INSERT 1 /* checksum insert descriptor */
-#define XMT_DESC_CMD_FORMAT 2 /* format descriptor */
-#define XMT_DESC_CMD_PRIME 3 /* prime descriptor */
-/* comand code shift (shift to bits [31:30] in word 0) */
-#define XMT_DESC_CMD_CODE_SHFT 6
- /* shifted command codes */
-#define XMT_RAW_SEND (XMT_DESC_CMD_RAW_SEND << XMT_DESC_CMD_CODE_SHFT)
-#define XMT_CSUM_INSERT (XMT_DESC_CMD_CSUM_INSERT << XMT_DESC_CMD_CODE_SHFT)
-#define XMT_FORMAT (XMT_DESC_CMD_FORMAT << XMT_DESC_CMD_CODE_SHFT)
-#define XMT_PRIME (XMT_DESC_CMD_PRIME << XMT_DESC_CMD_CODE_SHFT)
-
-/*
- * struct xmt_desc Control Byte (XmtCtl) definitions
- * NOTE: These bits do not work on Sahara (Rev A)!
- */
-/* current frame is a pause control frame (for statistics) */
-#define XMT_CTL_PAUSE_FRAME 0x80
-/* current frame is a control frame (for statistics) */
-#define XMT_CTL_CONTROL_FRAME 0x40
-#define XMT_CTL_PER_PKT_QUAL 0x20 /* per packet qualifier */
-#define XMT_CTL_PAD_MODE_NONE 0x00 /* do not pad frame */
-#define XMT_CTL_PAD_MODE_64 0x08 /* pad frame to 64 bytes */
-/* pad frame to 64 bytes, and VLAN frames to 68 bytes */
-#define XMT_CTL_PAD_MODE_VLAN_68 0x10
-#define XMT_CTL_PAD_MODE_68 0x18 /* pad frame to 68 bytes */
-/* generate FCS (CRC) for this frame */
-#define XMT_CTL_GEN_FCS 0x04
-#define XMT_CTL_DELAY_FCS_0 0x00 /* do not delay FCS calcution */
-/* delay FCS calculation by 1 (4-byte) word */
-#define XMT_CTL_DELAY_FCS_1 0x01
-/* delay FCS calculation by 2 (4-byte) words */
-#define XMT_CTL_DELAY_FCS_2 0x02
-/* delay FCS calculation by 3 (4-byte) words */
-#define XMT_CTL_DELAY_FCS_3 0x03
-
-/* struct xmt_desc XmtBufId definition */
-/*
- * The Xmt buffer ID is formed by dividing the buffer (DRAM) address
- * by 256 (or << 8)
- */
-
-#define XMT_BUF_ID_SHFT 8
-
-/* Receiver Sequencer Definitions */
-
-/* Receive Event Queue (queues 3 - 6) bit definitions */
-/* bit mask for the Receive Buffer ID */
-#define RCV_EVTQ_RBFID_MASK 0x0000FFFF
-
-/* Receive Buffer ID definition */
-/*
- * The Rcv buffer ID is formed by dividing the buffer (DRAM) address
- * by 32 (or << 5)
- */
-#define RCV_BUF_ID_SHFT 5
-
-/*
- * Format of the 18 byte Receive Buffer returned by the
- * Receive Sequencer for received packets
- */
-#pragma pack(push, 1)
-struct rcv_buf_hdr {
- u32 Status; /* Status word from Rcv Seq Parser */
- ushort Length; /* Rcv packet byte count */
- union {
- ushort TcpCsum; /* TCP checksum */
- struct {
- /* lower 8 bits of the TCP checksum */
- unsigned char TcpCsumL;
- /* Link hash (multicast frames only) */
- unsigned char LinkHash;
- };
- };
- ushort SktHash; /* Socket hash */
- unsigned char TcpHdrOffset; /* TCP header offset into packet */
- unsigned char IpHdrOffset; /* IP header offset into packet */
- u32 TpzHash; /* Toeplitz hash */
- ushort Reserved; /* Reserved */
-};
-#pragma pack(pop)
-
-/* Queue definitions */
-
-/* Ingress (read only) queue numbers */
-#define PXY_BUF_Q 0 /* Proxy Buffer Queue */
-#define HST_EVT_Q 1 /* Host Event Queue */
-#define XMT_BUF_Q 2 /* Transmit Buffer Queue */
-#define SKT_EVL_Q 3 /* RcvSqr Socket Event Low Priority Queue */
-#define RCV_EVL_Q 4 /* RcvSqr Rcv Event Low Priority Queue */
-#define SKT_EVH_Q 5 /* RcvSqr Socket Event High Priority Queue */
-#define RCV_EVH_Q 6 /* RcvSqr Rcv Event High Priority Queue */
-#define DMA_RSP_Q 7 /* Dma Response Queue - one per CPU context */
-/* Local (read/write) queue numbers */
-#define LOCAL_A_Q 8 /* Spare local Queue */
-#define LOCAL_B_Q 9 /* Spare local Queue */
-#define LOCAL_C_Q 10 /* Spare local Queue */
-#define FSM_EVT_Q 11 /* Finite-State-Machine Event Queue */
-#define SBF_PAL_Q 12 /* System Buffer Physical Address (low) Queue */
-#define SBF_PAH_Q 13 /* System Buffer Physical Address (high) Queue*/
-#define SBF_VAL_Q 14 /* System Buffer Virtual Address (low) Queue */
-#define SBF_VAH_Q 15 /* System Buffer Virtual Address (high) Queue */
-/* Egress (write only) queue numbers */
-#define H2G_CMD_Q 16 /* Host to GlbRam DMA Command Queue */
-#define H2D_CMD_Q 17 /* Host to DRAM DMA Command Queue */
-#define G2H_CMD_Q 18 /* GlbRam to Host DMA Command Queue */
-#define G2D_CMD_Q 19 /* GlbRam to DRAM DMA Command Queue */
-#define D2H_CMD_Q 20 /* DRAM to Host DMA Command Queue */
-#define D2G_CMD_Q 21 /* DRAM to GlbRam DMA Command Queue */
-#define D2D_CMD_Q 22 /* DRAM to DRAM DMA Command Queue */
-#define PXL_CMD_Q 23 /* Low Priority Proxy Command Queue */
-#define PXH_CMD_Q 24 /* High Priority Proxy Command Queue */
-#define RSQ_CMD_Q 25 /* Receive Sequencer Command Queue */
-#define RCV_BUF_Q 26 /* Receive Buffer Queue */
-
-/* Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) */
-/* enable copy of xmt descriptor to xmt command queue */
-#define PXY_COPY_EN 0x00200000
-#define PXY_SIZE_16 0x00000000 /* copy 16 bytes */
-#define PXY_SIZE_32 0x00100000 /* copy 32 bytes */
-
-/* SXG EEPROM/Flash Configuration Definitions */
-
-/* Location of configuration data in EEPROM or Flash */
-/* start addr for config info in EEPROM */
-#define EEPROM_CONFIG_START_ADDR 0x00
-/* start addr for config info in Flash */
-#define FLASH_CONFIG_START_ADDR 0x80
-
-/* Configuration data section defines */
-#define HW_CFG_SECTION_SIZE 512 /* size of H/W section */
-#define HW_CFG_SECTION_SIZE_A 256 /* size of H/W section (Sahara rev A) */
-/* starting location (offset) of S/W section */
-#define SW_CFG_SECTION_START 512
-/* starting location (offset) of S/W section (Sahara rev A) */
-#define SW_CFG_SECTION_START_A 256
-#define SW_CFG_SECTION_SIZE 128 /* size of S/W section */
-/*
- * H/W configuration data magic word Goes in Addr field of first
- * struct hw_cfg_data entry
- */
-#define HW_CFG_MAGIC_WORD 0xA5A5
-/*
- * H/W configuration data terminator Goes in Addr field of last
- * struct hw_cfg_data entry
- */
-#define HW_CFG_TERMINATOR 0xFFFF
-
-#define SW_CFG_MAGIC_WORD 0x5A5A /* S/W configuration data magic word */
-
-#pragma pack(push, 1)
-/*
- * Structure for an element of H/W configuration data.
- * Read by the Sahara hardware
- */
-struct hw_cfg_data {
- ushort Addr;
- ushort Data;
-};
-
-/*
- * Number of struct hw_cfg_data structures to put in the configuration data
- * data structure (struct sxg_config or struct sxg_config_a). The number is
- * computed to fill the entire H/W config section of the structure.
- */
-#define NUM_HW_CFG_ENTRIES \
- (HW_CFG_SECTION_SIZE / sizeof(struct hw_cfg_data))
-#define NUM_HW_CFG_ENTRIES_A \
- (HW_CFG_SECTION_SIZE_A / sizeof(struct hw_cfg_data))
-
-/* MAC address structure */
-struct sxg_config_mac {
- unsigned char MacAddr[6]; /* MAC Address */
-};
-
-/* FRU data structure */
-struct atk_fru {
- unsigned char PartNum[6];
- unsigned char Revision[2];
- unsigned char Serial[14];
-};
-
-/* OEM FRU Format types */
-#define ATK_FRU_FORMAT 0x0000
-#define CPQ_FRU_FORMAT 0x0001
-#define DELL_FRU_FORMAT 0x0002
-#define HP_FRU_FORMAT 0x0003
-#define IBM_FRU_FORMAT 0x0004
-#define EMC_FRU_FORMAT 0x0005
-#define NO_FRU_FORMAT 0xFFFF
-
-#define ATK_OEM_ASSY_SIZE 10 /* assy num is 9 chars plus \0 */
-
-/* OEM FRU structure for Alacritech */
-struct atk_oem {
- unsigned char Assy[ATK_OEM_ASSY_SIZE];
-};
-
-#define OEM_EEPROM_FRUSIZE 74 /* size of OEM fru info - size */
-/* chosen to fill out the S/W section */
-
-union oem_fru { /* OEM FRU information */
- unsigned char OemFru[OEM_EEPROM_FRUSIZE];
- struct atk_oem AtkOem;
-};
-
-/* Structure to hold the S/W configuration data. */
-struct sw_cfg_data {
- ushort MagicWord; /* Magic word for section 2 */
- ushort Version; /* Format version */
- struct sxg_config_mac MacAddr[4]; /* space for 4 MAC addresses */
- struct atk_fru AtkFru; /* FRU information */
- ushort OemFruFormat; /* OEM FRU format type */
- union oem_fru OemFru; /* OEM FRU information */
- ushort Checksum; /* Checksum of section 2 */
-};
-
-
-/* EEPROM/Flash Format */
-struct sxg_config {
- /* H/W Section - Read by Sahara hardware (512 bytes) */
- struct hw_cfg_data HwCfg[NUM_HW_CFG_ENTRIES];
- /* S/W Section - Other configuration data (128 bytes) */
- struct sw_cfg_data SwCfg;
-};
-
-#ifdef WINDOWS_COMPILER
-/*
- * The following macro is something of a kludge, but it is the only way
- * that I could find to catch certain programming errors at compile time.
- * If the asserted condition is true, then nothing happens. If false, then
- * the compiler tries to typedef an array with -1 members, which generates
- * an error. Unfortunately, the error message is meaningless, but at least
- * it catches the problem. This macro would be unnecessary if the compiler
- * allowed the sizeof and offsetof macros to be used in the #if directive.
- */
-#define compile_time_assert(cond) \
- typedef char comp_error[(cond) ? 1 : -1]
-
-/*
- * A compiler error on either of the next two lines indicates that the struct sxg_config
- * structure was built incorrectly. Unfortunately, the error message produced
- * is meaningless. But this is apparently the only way to catch this problem
- * at compile time.
- */
-compile_time_assert (offsetof(struct sxg_config, SwCfg) == SW_CFG_SECTION_START);
-compile_time_assert (sizeof(struct sxg_config) == HW_CFG_SECTION_SIZE
- + SW_CFG_SECTION_SIZE);
-
-compile_time_assert (offsetof(struct sxg_config_a, SwCfg)
- == SW_CFG_SECTION_START_A);
-compile_time_assert (sizeof(struct sxg_config_a) == HW_CFG_SECTION_SIZE_A
- + SW_CFG_SECTION_SIZE);
-#endif
-/*
- * Structure used to pass information between driver and user-mode
- * control application
- */
-struct adapt_userinfo {
- bool LinkUp;
- /* use LinkUp - any need for other states? */
- /* u32 LinkState; */
- u32 LinkSpeed; /* not currently needed */
- u32 LinkDuplex; /* not currently needed */
- enum xcvr_type XcvrType; /* type of xcvr on fiber card */
- /* fiber card xcvr vendor */
- unsigned char XcvrVendor[XCVR_VENDOR_LEN];
- unsigned char XcvrMode[XCVR_MODEL_LEN];
- u32 Port; /* not currently needed */
- u32 PhysPort; /* not currently needed */
- ushort PciLanes;
- unsigned char MacAddr[6];
- unsigned char CurrMacAddr[6];
- struct atk_fru AtkFru;
- ushort OemFruFormat;
- union oem_fru OemFru;
-};
-
-#pragma pack(pop)
-
-/* Miscellaneous Hardware definitions */
-
-/* Hardware Type definitions */
-
-/* Sahara (ASIC level) defines */
-#define SAHARA_GRAM_SIZE 0x020000 /* GRAM size - 128 KB */
-#define SAHARA_DRAM_SIZE 0x200000 /* DRAM size - 2 MB */
-/* QRAM size - 16K entries (64 KB) */
-#define SAHARA_QRAM_SIZE 0x004000
-/* WCS - 8K instructions (x 108 bits) */
-#define SAHARA_WCS_SIZE 0x002000
-
-/* Arabia (board level) defines */
-#define FLASH_SIZE 0x080000 /* 512 KB (4 Mb) */
-/* EEPROM size (bytes), including xfmr area */
-#define EEPROM_SIZE_XFMR 1024
-/* EEPROM size excluding xfmr area (512 + 128) */
-#define EEPROM_SIZE_NO_XFMR 640
-/* EEPROM size for Sahara rev A */
-#define EEPROM_SIZE_REV_A 512
diff --git a/drivers/staging/sxg/sxgphycode-1.2.h b/drivers/staging/sxg/sxgphycode-1.2.h
deleted file mode 100644
index b5448b9..0000000
--- a/drivers/staging/sxg/sxgphycode-1.2.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright ? 1997-2008 Alacritech, Inc. All rights reserved
- *
- * $Id: sxgphycode.h,v 1.2 2008/10/02 01:44:07 Exp $
- *
- * sxgphycode.h:
- *
- * This file PHY microcode and register initialization data.
- */
-
-/**********************************************************************
- * PHY Microcode
- **********************************************************************/
-//
-// The following contains both PHY microcode and PHY register
-// initialization data. It is specific to both the PHY and the
-// type of transceiver.
-//
-
-// Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR)
-// AEL2005 SR firmware rev 18 (microInit_mdio_SR_AEL2005C_18.tx).
-static struct phy_ucode PhyUcode[] = {
- // NOTE: An address of 0 is a special case. When the download routine
- // sees an address of 0, it does not write to the PHY. Instead, it delays
- // the download. The length of the delay (in ms) is given in the data field.
- // Delays are required at certain points.
-
- // Platform-specific MDIO Patches:
- // (include patches for 10G RX polarity flip, 50Mhz Synth, etc)
- // Addr Data
- {0xc017, 0xfeb0}, // flip RX_LOS polarity (mandatory patch for SFP+ applications)
- {0xC001, 0x0428}, // flip RX serial polarity
-
- {0xc013, 0xf341}, // invert lxmit clock (mandatory patch)
- {0xc210, 0x8000}, // reset datapath (mandatory patch)
- {0xc210, 0x8100}, // reset datapath (mandatory patch)
- {0xc210, 0x8000}, // reset datapath (mandatory patch)
- {0xc210, 0x0000}, // reset datapath (mandatory patch)
- {0x0000, 0x0032}, // wait for 50ms for datapath reset to complete. (mandatory patch)
-
- // Transceiver-specific MDIO Patches:
- {0xc003, 0x0181}, // (bit 7) enable the CDR inc setting in 1.C005 (mandatory patch for SR code)
- {0xc010, 0x448a}, // (bit 14) mask out high BER input from the LOS signal in 1.000A (mandatory patch for SR code)
-
- // Transceiver-specific Microcontroller Initialization:
- {0xc04a, 0x5200}, // activate microcontroller and pause
- {0x0000, 0x0032}, // wait 50ms for microcontroller before writing in code.
-
- // code block starts here:
- {0xcc00, 0x2ff4}, {0xcc01, 0x3cd4}, {0xcc02, 0x2015}, {0xcc03, 0x3125},
- {0xcc04, 0x6524}, {0xcc05, 0x27ff}, {0xcc06, 0x300f}, {0xcc07, 0x2c8b},
- {0xcc08, 0x300b}, {0xcc09, 0x4009}, {0xcc0a, 0x400e}, {0xcc0b, 0x2f12},
- {0xcc0c, 0x3002}, {0xcc0d, 0x1002}, {0xcc0e, 0x2112}, {0xcc0f, 0x3012},
- {0xcc10, 0x1002}, {0xcc11, 0x2572}, {0xcc12, 0x3012}, {0xcc13, 0x1002},
- {0xcc14, 0xd01e}, {0xcc15, 0x2772}, {0xcc16, 0x3012}, {0xcc17, 0x1002},
- {0xcc18, 0x2004}, {0xcc19, 0x3c84}, {0xcc1a, 0x6436}, {0xcc1b, 0x2007},
- {0xcc1c, 0x3f87}, {0xcc1d, 0x8676}, {0xcc1e, 0x40b7}, {0xcc1f, 0xa746},
- {0xcc20, 0x4047}, {0xcc21, 0x5673}, {0xcc22, 0x2982}, {0xcc23, 0x3002},
- {0xcc24, 0x13d2}, {0xcc25, 0x8bbd}, {0xcc26, 0x2802}, {0xcc27, 0x3012},
- {0xcc28, 0x1002}, {0xcc29, 0x2032}, {0xcc2a, 0x3012}, {0xcc2b, 0x1002},
- {0xcc2c, 0x5cc3}, {0xcc2d, 0x0314}, {0xcc2e, 0x2942}, {0xcc2f, 0x3002},
- {0xcc30, 0x1002}, {0xcc31, 0xd019}, {0xcc32, 0x2fd2}, {0xcc33, 0x3002},
- {0xcc34, 0x1002}, {0xcc35, 0x2a04}, {0xcc36, 0x3c74}, {0xcc37, 0x6435},
- {0xcc38, 0x2fa4}, {0xcc39, 0x3cd4}, {0xcc3a, 0x6624}, {0xcc3b, 0x5563},
- {0xcc3c, 0x2d42}, {0xcc3d, 0x3002}, {0xcc3e, 0x13d2}, {0xcc3f, 0x464d},
- {0xcc40, 0x2802}, {0xcc41, 0x3012}, {0xcc42, 0x1002}, {0xcc43, 0x2fd2},
- {0xcc44, 0x3002}, {0xcc45, 0x1002}, {0xcc46, 0x2fb4}, {0xcc47, 0x3cd4},
- {0xcc48, 0x6624}, {0xcc49, 0x5563}, {0xcc4a, 0x2d42}, {0xcc4b, 0x3002},
- {0xcc4c, 0x13d2}, {0xcc4d, 0x2e72}, {0xcc4e, 0x3002}, {0xcc4f, 0x1002},
- {0xcc50, 0x2f72}, {0xcc51, 0x3002}, {0xcc52, 0x1002}, {0xcc53, 0x0004},
- {0xcc54, 0x2942}, {0xcc55, 0x3002}, {0xcc56, 0x1002}, {0xcc57, 0x2032},
- {0xcc58, 0x3012}, {0xcc59, 0x1002}, {0xcc5a, 0x5cc3}, {0xcc5b, 0x0317},
- {0xcc5c, 0x2f12}, {0xcc5d, 0x3002}, {0xcc5e, 0x1002}, {0xcc5f, 0x2942},
- {0xcc60, 0x3002}, {0xcc61, 0x1002}, {0xcc62, 0x22cd}, {0xcc63, 0x301d},
- {0xcc64, 0x2802}, {0xcc65, 0x3012}, {0xcc66, 0x1002}, {0xcc67, 0x20b2},
- {0xcc68, 0x3012}, {0xcc69, 0x1002}, {0xcc6a, 0x5aa3}, {0xcc6b, 0x2dc2},
- {0xcc6c, 0x3002}, {0xcc6d, 0x1312}, {0xcc6e, 0x2d02}, {0xcc6f, 0x3002},
- {0xcc70, 0x1002}, {0xcc71, 0x2807}, {0xcc72, 0x31a7}, {0xcc73, 0x20c4},
- {0xcc74, 0x3c24}, {0xcc75, 0x6724}, {0xcc76, 0x1002}, {0xcc77, 0x2807},
- {0xcc78, 0x3187}, {0xcc79, 0x20c4}, {0xcc7a, 0x3c24}, {0xcc7b, 0x6724},
- {0xcc7c, 0x1002}, {0xcc7d, 0x2514}, {0xcc7e, 0x3c64}, {0xcc7f, 0x6436},
- {0xcc80, 0xdff4}, {0xcc81, 0x6436}, {0xcc82, 0x1002}, {0xcc83, 0x40a4},
- {0xcc84, 0x643c}, {0xcc85, 0x4016}, {0xcc86, 0x8c6c}, {0xcc87, 0x2b24},
- {0xcc88, 0x3c24}, {0xcc89, 0x6435}, {0xcc8a, 0x1002}, {0xcc8b, 0x2b24},
- {0xcc8c, 0x3c24}, {0xcc8d, 0x643a}, {0xcc8e, 0x4025}, {0xcc8f, 0x8a5a},
- {0xcc90, 0x1002}, {0xcc91, 0x26d1}, {0xcc92, 0x3011}, {0xcc93, 0x1001},
- {0xcc94, 0xc7a0}, {0xcc95, 0x0100}, {0xcc96, 0xc502}, {0xcc97, 0x53ac},
- {0xcc98, 0xc503}, {0xcc99, 0xd5d5}, {0xcc9a, 0xc600}, {0xcc9b, 0x2a6d},
- {0xcc9c, 0xc601}, {0xcc9d, 0x2a4c}, {0xcc9e, 0xc602}, {0xcc9f, 0x0111},
- {0xcca0, 0xc60c}, {0xcca1, 0x5900}, {0xcca2, 0xc710}, {0xcca3, 0x0700},
- {0xcca4, 0xc718}, {0xcca5, 0x0700}, {0xcca6, 0xc720}, {0xcca7, 0x4700},
- {0xcca8, 0xc801}, {0xcca9, 0x7f50}, {0xccaa, 0xc802}, {0xccab, 0x7760},
- {0xccac, 0xc803}, {0xccad, 0x7fce}, {0xccae, 0xc804}, {0xccaf, 0x5700},
- {0xccb0, 0xc805}, {0xccb1, 0x5f11}, {0xccb2, 0xc806}, {0xccb3, 0x4751},
- {0xccb4, 0xc807}, {0xccb5, 0x57e1}, {0xccb6, 0xc808}, {0xccb7, 0x2700},
- {0xccb8, 0xc809}, {0xccb9, 0x0000}, {0xccba, 0xc821}, {0xccbb, 0x0002},
- {0xccbc, 0xc822}, {0xccbd, 0x0014}, {0xccbe, 0xc832}, {0xccbf, 0x1186},
- {0xccc0, 0xc847}, {0xccc1, 0x1e02}, {0xccc2, 0xc013}, {0xccc3, 0xf341},
- {0xccc4, 0xc01a}, {0xccc5, 0x0446}, {0xccc6, 0xc024}, {0xccc7, 0x1000},
- {0xccc8, 0xc025}, {0xccc9, 0x0a00}, {0xccca, 0xc026}, {0xcccb, 0x0c0c},
- {0xcccc, 0xc027}, {0xcccd, 0x0c0c}, {0xccce, 0xc029}, {0xcccf, 0x00a0},
- {0xccd0, 0xc030}, {0xccd1, 0x0a00}, {0xccd2, 0xc03c}, {0xccd3, 0x001c},
- {0xccd4, 0xc005}, {0xccd5, 0x7a06}, {0xccd6, 0x0000}, {0xccd7, 0x26d1},
- {0xccd8, 0x3011}, {0xccd9, 0x1001}, {0xccda, 0xc620}, {0xccdb, 0x0000},
- {0xccdc, 0xc621}, {0xccdd, 0x003f}, {0xccde, 0xc622}, {0xccdf, 0x0000},
- {0xcce0, 0xc623}, {0xcce1, 0x0000}, {0xcce2, 0xc624}, {0xcce3, 0x0000},
- {0xcce4, 0xc625}, {0xcce5, 0x0000}, {0xcce6, 0xc627}, {0xcce7, 0x0000},
- {0xcce8, 0xc628}, {0xcce9, 0x0000}, {0xccea, 0xc62c}, {0xcceb, 0x0000},
- {0xccec, 0x0000}, {0xcced, 0x2806}, {0xccee, 0x3cb6}, {0xccef, 0xc161},
- {0xccf0, 0x6134}, {0xccf1, 0x6135}, {0xccf2, 0x5443}, {0xccf3, 0x0303},
- {0xccf4, 0x6524}, {0xccf5, 0x000b}, {0xccf6, 0x1002}, {0xccf7, 0x2104},
- {0xccf8, 0x3c24}, {0xccf9, 0x2105}, {0xccfa, 0x3805}, {0xccfb, 0x6524},
- {0xccfc, 0xdff4}, {0xccfd, 0x4005}, {0xccfe, 0x6524}, {0xccff, 0x1002},
- {0xcd00, 0x5dd3}, {0xcd01, 0x0306}, {0xcd02, 0x2ff7}, {0xcd03, 0x38f7},
- {0xcd04, 0x60b7}, {0xcd05, 0xdffd}, {0xcd06, 0x000a}, {0xcd07, 0x1002},
- {0xcd08, 0x0000},
- // end of code block
-
- // Unpause the microcontroller to start program
- {0xca00, 0x0080},
- {0xca12, 0x0000},
- {0x0000, 0x000A}, // wait 10ms just to be safe
-
- // Configure the LED's
- {0xc214, 0x0099}, // configure the LED drivers (for Sahara rev B)
- {0xc216, 0x0400}, // configure the one LED
- {0xc217, 0x0000}, // don't drive the 2nd LED (if it exists)
-
- {0xffff, 0xffff} // table terminator
-};