net: Kconfig whitespace cleanup
Many lines in Kconfig start withe 8 spaces instead of a TAB, and even
sometimes with 7 spaces. Replace 10 or 9 spaces, or TAB + 1 space,
by TAB + 2 spaces, and 8 or 7 spaces by TAB.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa62a63..0a7e6ce 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1533,7 +1533,7 @@
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
- to identify the adapter.
+ to identify the adapter.
For the latest Intel PRO/100 network driver for Linux, see:
@@ -1786,17 +1786,17 @@
tristate "Micrel KSZ8841/42 with generic bus interface"
depends on HAS_IOMEM && DMA_ENGINE
help
- This platform driver is for KSZ8841(1-port) / KS8842(2-port)
- ethernet switch chip (managed, VLAN, QoS) from Micrel or
- Timberdale(FPGA).
+ This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+ ethernet switch chip (managed, VLAN, QoS) from Micrel or
+ Timberdale(FPGA).
config KS8851
- tristate "Micrel KS8851 SPI"
- depends on SPI
- select MII
+ tristate "Micrel KS8851 SPI"
+ depends on SPI
+ select MII
select CRC32
- help
- SPI driver for Micrel KS8851 SPI attached network chip.
+ help
+ SPI driver for Micrel KS8851 SPI attached network chip.
config KS8851_MLL
tristate "Micrel KS8851 MLL"
@@ -2133,25 +2133,25 @@
will be called ipg. This is recommended.
config IGB
- tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) 82575/82576 gigabit ethernet family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
+ tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
- For general information and support, go to the Intel support
- website at:
+ For general information and support, go to the Intel support
+ website at:
- <http://support.intel.com>
+ <http://support.intel.com>
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
- To compile this driver as a module, choose M here. The module
- will be called igb.
+ To compile this driver as a module, choose M here. The module
+ will be called igb.
config IGB_DCA
bool "Direct Cache Access (DCA) Support"
@@ -2163,25 +2163,25 @@
is used, with the intent of lessening the impact of cache misses.
config IGBVF
- tristate "Intel(R) 82576 Virtual Function Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) 82576 virtual functions. For more
- information on how to identify your adapter, go to the Adapter &
- Driver ID Guide at:
+ tristate "Intel(R) 82576 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82576 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
- For general information and support, go to the Intel support
- website at:
+ For general information and support, go to the Intel support
+ website at:
- <http://support.intel.com>
+ <http://support.intel.com>
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
- To compile this driver as a module, choose M here. The module
- will be called igbvf.
+ To compile this driver as a module, choose M here. The module
+ will be called igbvf.
source "drivers/net/ixp2000/Kconfig"
@@ -2300,14 +2300,14 @@
will be called skge. This is recommended.
config SKGE_DEBUG
- bool "Debugging interface"
- depends on SKGE && DEBUG_FS
- help
- This option adds the ability to dump driver state for debugging.
- The file /sys/kernel/debug/skge/ethX displays the state of the internal
- transmit and receive rings.
+ bool "Debugging interface"
+ depends on SKGE && DEBUG_FS
+ help
+ This option adds the ability to dump driver state for debugging.
+ The file /sys/kernel/debug/skge/ethX displays the state of the internal
+ transmit and receive rings.
- If unsure, say N.
+ If unsure, say N.
config SKY2
tristate "SysKonnect Yukon2 support"
@@ -2326,14 +2326,14 @@
will be called sky2. This is recommended.
config SKY2_DEBUG
- bool "Debugging interface"
- depends on SKY2 && DEBUG_FS
- help
- This option adds the ability to dump driver state for debugging.
- The file /sys/kernel/debug/sky2/ethX displays the state of the internal
- transmit and receive rings.
+ bool "Debugging interface"
+ depends on SKY2 && DEBUG_FS
+ help
+ This option adds the ability to dump driver state for debugging.
+ The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+ transmit and receive rings.
- If unsure, say N.
+ If unsure, say N.
config VIA_VELOCITY
tristate "VIA Velocity support"
@@ -2573,32 +2573,32 @@
tristate
config CHELSIO_T1
- tristate "Chelsio 10Gb Ethernet support"
- depends on PCI
+ tristate "Chelsio 10Gb Ethernet support"
+ depends on PCI
select CRC32
select MDIO
- help
- This driver supports Chelsio gigabit and 10-gigabit
- Ethernet cards. More information about adapter features and
+ help
+ This driver supports Chelsio gigabit and 10-gigabit
+ Ethernet cards. More information about adapter features and
performance tuning is in <file:Documentation/networking/cxgb.txt>.
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.html>.
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.html>.
- Please send feedback to <linux-bugs@chelsio.com>.
+ Please send feedback to <linux-bugs@chelsio.com>.
- To compile this driver as a module, choose M here: the module
- will be called cxgb.
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb.
config CHELSIO_T1_1G
- bool "Chelsio gigabit Ethernet support"
- depends on CHELSIO_T1
- help
- Enables support for Chelsio's gigabit Ethernet PCI cards. If you
- are using only 10G cards say 'N' here.
+ bool "Chelsio gigabit Ethernet support"
+ depends on CHELSIO_T1
+ help
+ Enables support for Chelsio's gigabit Ethernet PCI cards. If you
+ are using only 10G cards say 'N' here.
config CHELSIO_T3_DEPENDS
tristate
@@ -2728,26 +2728,26 @@
If unsure, say N.
config IXGBEVF
- tristate "Intel(R) 82599 Virtual Function Ethernet support"
- depends on PCI_MSI
- ---help---
- This driver supports Intel(R) 82599 virtual functions. For more
- information on how to identify your adapter, go to the Adapter &
- Driver ID Guide at:
+ tristate "Intel(R) 82599 Virtual Function Ethernet support"
+ depends on PCI_MSI
+ ---help---
+ This driver supports Intel(R) 82599 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
- <http://support.intel.com/support/network/sb/CS-008441.htm>
+ <http://support.intel.com/support/network/sb/CS-008441.htm>
- For general information and support, go to the Intel support
- website at:
+ For general information and support, go to the Intel support
+ website at:
- <http://support.intel.com>
+ <http://support.intel.com>
- More specific information on configuring the driver is in
- <file:Documentation/networking/ixgbevf.txt>.
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgbevf.txt>.
- To compile this driver as a module, choose M here. The module
- will be called ixgbevf. MSI-X interrupt support is required
- for this driver to work correctly.
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbevf. MSI-X interrupt support is required
+ for this driver to work correctly.
config IXGB
tristate "Intel(R) PRO/10GbE support"
@@ -2915,18 +2915,18 @@
will be called qlge.
config BNA
- tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
- depends on PCI
- ---help---
- This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
- cards.
- To compile this driver as a module, choose M here: the module
- will be called bna.
+ tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
+ depends on PCI
+ ---help---
+ This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
+ cards.
+ To compile this driver as a module, choose M here: the module
+ will be called bna.
- For general information and support, go to the Brocade support
- website at:
+ For general information and support, go to the Brocade support
+ website at:
- <http://support.brocade.com>
+ <http://support.brocade.com>
source "drivers/net/sfc/Kconfig"
@@ -3236,18 +3236,18 @@
modules once you have said "make modules". If unsure, say N.
config PPP_MPPE
- tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
- depends on PPP && EXPERIMENTAL
- select CRYPTO
- select CRYPTO_SHA1
- select CRYPTO_ARC4
- select CRYPTO_ECB
- ---help---
- Support for the MPPE Encryption protocol, as employed by the
- Microsoft Point-to-Point Tunneling Protocol.
+ tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+ depends on PPP && EXPERIMENTAL
+ select CRYPTO
+ select CRYPTO_SHA1
+ select CRYPTO_ARC4
+ select CRYPTO_ECB
+ ---help---
+ Support for the MPPE Encryption protocol, as employed by the
+ Microsoft Point-to-Point Tunneling Protocol.
- See http://pptpclient.sourceforge.net/ for information on
- configuring PPTP clients and servers to utilize this method.
+ See http://pptpclient.sourceforge.net/ for information on
+ configuring PPTP clients and servers to utilize this method.
config PPPOE
tristate "PPP over Ethernet (EXPERIMENTAL)"
@@ -3406,14 +3406,14 @@
depends on EXPERIMENTAL && VIRTIO
---help---
This is the virtual network driver for virtio. It can be used with
- lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
+ lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
config VMXNET3
- tristate "VMware VMXNET3 ethernet driver"
- depends on PCI && INET
- help
- This driver supports VMware's vmxnet3 virtual ethernet NIC.
- To compile this driver as a module, choose M here: the
- module will be called vmxnet3.
+ tristate "VMware VMXNET3 ethernet driver"
+ depends on PCI && INET
+ help
+ This driver supports VMware's vmxnet3 virtual ethernet NIC.
+ To compile this driver as a module, choose M here: the
+ module will be called vmxnet3.
endif # NETDEVICES