mfd: sec: Add support for S2MPS14
Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 9623899..a4df76c 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -27,6 +27,7 @@
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/rtc.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/regmap.h>
@@ -69,6 +70,16 @@
}
};
+static const struct mfd_cell s2mps14_devs[] = {
+ {
+ .name = "s2mps14-pmic",
+ }, {
+ .name = "s2mps14-rtc",
+ }, {
+ .name = "s2mps14-clk",
+ }
+};
+
#ifdef CONFIG_OF
static struct of_device_id sec_dt_match[] = {
{ .compatible = "samsung,s5m8767-pmic",
@@ -77,6 +88,9 @@
{ .compatible = "samsung,s2mps11-pmic",
.data = (void *)S2MPS11X,
},
+ { .compatible = "samsung,s2mps14-pmic",
+ .data = (void *)S2MPS14X,
+ },
{},
};
#endif
@@ -120,6 +134,15 @@
.cache_type = REGCACHE_FLAT,
};
+static const struct regmap_config s2mps14_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS14_REG_LDODSCH3,
+ .volatile_reg = s2mps11_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s5m8763_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -138,13 +161,20 @@
.cache_type = REGCACHE_FLAT,
};
-static const struct regmap_config sec_rtc_regmap_config = {
+static const struct regmap_config s5m_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = SEC_RTC_REG_MAX,
};
+static const struct regmap_config s2mps14_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS_RTC_REG_MAX,
+};
+
#ifdef CONFIG_OF
/*
* Only the common platform data elements for s5m8767 are parsed here from the
@@ -239,19 +269,23 @@
* However we must pass something to devm_regmap_init_i2c()
* so use S5M-like regmap config even though it wouldn't work.
*/
- regmap_rtc = &sec_rtc_regmap_config;
+ regmap_rtc = &s5m_rtc_regmap_config;
+ break;
+ case S2MPS14X:
+ regmap = &s2mps14_regmap_config;
+ regmap_rtc = &s2mps14_rtc_regmap_config;
break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
- regmap_rtc = &sec_rtc_regmap_config;
+ regmap_rtc = &s5m_rtc_regmap_config;
break;
case S5M8767X:
regmap = &s5m8767_regmap_config;
- regmap_rtc = &sec_rtc_regmap_config;
+ regmap_rtc = &s5m_rtc_regmap_config;
break;
default:
regmap = &sec_regmap_config;
- regmap_rtc = &sec_rtc_regmap_config;
+ regmap_rtc = &s5m_rtc_regmap_config;
break;
}
@@ -298,6 +332,10 @@
ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
break;
+ case S2MPS14X:
+ ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
+ ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
+ break;
default:
/* If this happens the probe function is problem */
BUG();