EDAC, amd64_edac: Extend scrub rate support to F15hM60h
The scrub rate control register has moved to function 2 in PCI config
space and is at a different offset on family 0x15, models 0x60 and
later. The minimum recommended scrub rate has also changed. (Refer to
D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG).
Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate
this.
Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Cleanup conditionals. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 73aea40..ca03a73 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -173,7 +173,7 @@
* scan the scrub rate mapping table for a close or matching bandwidth value to
* issue. If requested is too big, then use last maximum value found.
*/
-static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
+static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
{
u32 scrubval;
int i;
@@ -201,7 +201,14 @@
scrubval = scrubrates[i].scrubval;
- pci_write_bits32(ctl, SCRCTRL, scrubval, 0x001F);
+ if (pvt->fam == 0x15 && pvt->model == 0x60) {
+ f15h_select_dct(pvt, 0);
+ pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
+ f15h_select_dct(pvt, 1);
+ pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
+ } else {
+ pci_write_bits32(pvt->F3, SCRCTRL, scrubval, 0x001F);
+ }
if (scrubval)
return scrubrates[i].bandwidth;
@@ -217,11 +224,15 @@
if (pvt->fam == 0xf)
min_scrubrate = 0x0;
- /* Erratum #505 */
- if (pvt->fam == 0x15 && pvt->model < 0x10)
- f15h_select_dct(pvt, 0);
+ if (pvt->fam == 0x15) {
+ /* Erratum #505 */
+ if (pvt->model < 0x10)
+ f15h_select_dct(pvt, 0);
- return __set_scrub_rate(pvt->F3, bw, min_scrubrate);
+ if (pvt->model == 0x60)
+ min_scrubrate = 0x6;
+ }
+ return __set_scrub_rate(pvt, bw, min_scrubrate);
}
static int get_scrub_rate(struct mem_ctl_info *mci)
@@ -230,11 +241,15 @@
u32 scrubval = 0;
int i, retval = -EINVAL;
- /* Erratum #505 */
- if (pvt->fam == 0x15 && pvt->model < 0x10)
- f15h_select_dct(pvt, 0);
+ if (pvt->fam == 0x15) {
+ /* Erratum #505 */
+ if (pvt->model < 0x10)
+ f15h_select_dct(pvt, 0);
- amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
+ if (pvt->model == 0x60)
+ amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval);
+ } else
+ amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
scrubval = scrubval & 0x001F;