mfd: intel-lpss: Add default I2C device properties for Apollo Lake
Default I2C device properties for Intel Broxton, especially SDA hold time
may not be enough on Intel Apollo Lake. These properties are used in case
we don't get timing parameters from ACPI.
The default SDA hold time for Broxton may fail with arbitration lost errors
on Apollo Lake:
i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
Fix this by using different default device properties on Apollo Lake than
Broxton.
Reported-by: Paul Liu <paul.liu@canonical.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c
index 7ddc4a9..6bf8d64 100644
--- a/drivers/mfd/intel-lpss-acpi.c
+++ b/drivers/mfd/intel-lpss-acpi.c
@@ -52,6 +52,18 @@
.properties = bxt_i2c_properties,
};
+static struct property_entry apl_i2c_properties[] = {
+ PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+ PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+ PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+ { },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+ .clk_rate = 133000000,
+ .properties = apl_i2c_properties,
+};
+
static const struct acpi_device_id intel_lpss_acpi_ids[] = {
/* SPT */
{ "INT3446", (kernel_ulong_t)&spt_i2c_info },
@@ -61,7 +73,7 @@
{ "80860ABC", (kernel_ulong_t)&bxt_info },
{ "80860AC2", (kernel_ulong_t)&bxt_info },
/* APL */
- { "80865AAC", (kernel_ulong_t)&bxt_i2c_info },
+ { "80865AAC", (kernel_ulong_t)&apl_i2c_info },
{ "80865ABC", (kernel_ulong_t)&bxt_info },
{ "80865AC2", (kernel_ulong_t)&bxt_info },
{ }