block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity()

bdops->set_capacity() is unnecessarily generic.  All that's required
is a simple one way notification to lower level driver telling it to
try to unlock native capacity.  There's no reason to pass in target
capacity or return the new capacity.  The former is always the
inherent native capacity and the latter can be handled via the usual
device resize / revalidation path.  In fact, the current API is always
used that way.

Replace ->set_capacity() with ->unlock_native_capacity() which take
only @disk and doesn't return anything.  IDE which is the only current
user of the API is converted accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 3b128dc..33d6503 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -407,32 +407,24 @@
 	return 0;
 }
 
-static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
+static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
 {
-	u64 set = min(capacity, drive->probed_capacity);
 	u16 *id = drive->id;
 	int lba48 = ata_id_lba48_enabled(id);
 
 	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
 	    ata_id_hpa_enabled(id) == 0)
-		goto out;
+		return;
 
 	/*
 	 * according to the spec the SET MAX ADDRESS command shall be
 	 * immediately preceded by a READ NATIVE MAX ADDRESS command
 	 */
-	capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
-	if (capacity == 0)
-		goto out;
+	if (!ide_disk_hpa_get_native_capacity(drive, lba48))
+		return;
 
-	set = ide_disk_hpa_set_capacity(drive, set, lba48);
-	if (set) {
-		/* needed for ->resume to disable HPA */
-		drive->dev_flags |= IDE_DFLAG_NOHPA;
-		return set;
-	}
-out:
-	return drive->capacity64;
+	if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48))
+		drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
 }
 
 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
@@ -783,13 +775,13 @@
 }
 
 const struct ide_disk_ops ide_ata_disk_ops = {
-	.check		= ide_disk_check,
-	.set_capacity	= ide_disk_set_capacity,
-	.get_capacity	= ide_disk_get_capacity,
-	.setup		= ide_disk_setup,
-	.flush		= ide_disk_flush,
-	.init_media	= ide_disk_init_media,
-	.set_doorlock	= ide_disk_set_doorlock,
-	.do_request	= ide_do_rw_disk,
-	.ioctl		= ide_disk_ioctl,
+	.check			= ide_disk_check,
+	.unlock_native_capacity	= ide_disk_unlock_native_capacity,
+	.get_capacity		= ide_disk_get_capacity,
+	.setup			= ide_disk_setup,
+	.flush			= ide_disk_flush,
+	.init_media		= ide_disk_init_media,
+	.set_doorlock		= ide_disk_set_doorlock,
+	.do_request		= ide_do_rw_disk,
+	.ioctl			= ide_disk_ioctl,
 };