[PATCH] HPET: make frequency calculations 32 bit safe
On 32-bit architectures, the multiplication in the argument for
hpet_time_div() often overflows. In the typical case of a 14.32 MHz timer,
this happens when the desired frequency exceeds 61 Hz.
To avoid this multiplication, we can precompute and store the hardware
timer frequency, instead of the period, in the device structure, which
leaves us with a simple division when computing the number of timer ticks.
As a side effect, this also removes a theoretical bug where the timer
interpolator's frequency would be computed as a 32-bit value even if the
HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index b619ca5..a1eb14e 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -78,7 +78,7 @@
struct hpet __iomem *hp_hpet;
unsigned long hp_hpet_phys;
struct time_interpolator *hp_interpolator;
- unsigned long hp_period;
+ unsigned long long hp_tick_freq;
unsigned long hp_delta;
unsigned int hp_ntimer;
unsigned int hp_which;
@@ -427,12 +427,14 @@
return 0;
}
-static inline unsigned long hpet_time_div(unsigned long dis)
+/* converts Hz to number of timer ticks */
+static inline unsigned long hpet_time_div(struct hpets *hpets,
+ unsigned long dis)
{
- unsigned long long m = 1000000000000000ULL;
+ unsigned long long m;
+ m = hpets->hp_tick_freq + (dis >> 1);
do_div(m, dis);
-
return (unsigned long)m;
}
@@ -480,7 +482,7 @@
{
struct hpet_info info;
- info.hi_ireqfreq = hpet_time_div(hpetp->hp_period *
+ info.hi_ireqfreq = hpet_time_div(hpetp,
devp->hd_ireqfreq);
info.hi_flags =
readq(&timer->hpet_config) & Tn_PER_INT_CAP_MASK;
@@ -524,7 +526,7 @@
break;
}
- devp->hd_ireqfreq = hpet_time_div(hpetp->hp_period * arg);
+ devp->hd_ireqfreq = hpet_time_div(hpetp, arg);
}
return err;
@@ -713,7 +715,7 @@
ti->source = TIME_SOURCE_MMIO64;
ti->shift = 10;
ti->addr = &hpetp->hp_hpet->hpet_mc;
- ti->frequency = hpet_time_div(hpets->hp_period);
+ ti->frequency = hpetp->hp_tick_freq;
ti->drift = HPET_DRIFT;
ti->mask = -1;
@@ -750,7 +752,7 @@
t = read_counter(&timer->hpet_compare);
i = 0;
- count = hpet_time_div(hpetp->hp_period * TICK_CALIBRATE);
+ count = hpet_time_div(hpetp, TICK_CALIBRATE);
local_irq_save(flags);
@@ -775,7 +777,8 @@
size_t siz;
struct hpet __iomem *hpet;
static struct hpets *last = (struct hpets *)0;
- unsigned long ns;
+ unsigned long ns, period;
+ unsigned long long temp;
/*
* hpet_alloc can be called by platform dependent code.
@@ -825,8 +828,12 @@
last = hpetp;
- hpetp->hp_period = (cap & HPET_COUNTER_CLK_PERIOD_MASK) >>
- HPET_COUNTER_CLK_PERIOD_SHIFT;
+ period = (cap & HPET_COUNTER_CLK_PERIOD_MASK) >>
+ HPET_COUNTER_CLK_PERIOD_SHIFT; /* fs, 10^-15 */
+ temp = 1000000000000000uLL; /* 10^15 femtoseconds per second */
+ temp += period >> 1; /* round */
+ do_div(temp, period);
+ hpetp->hp_tick_freq = temp; /* ticks per second */
printk(KERN_INFO "hpet%d: at MMIO 0x%lx, IRQ%s",
hpetp->hp_which, hdp->hd_phys_address,
@@ -835,8 +842,7 @@
printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
printk("\n");
- ns = hpetp->hp_period; /* femptoseconds, 10^-15 */
- ns /= 1000000; /* convert to nanoseconds, 10^-9 */
+ ns = period / 1000000; /* convert to nanoseconds, 10^-9 */
printk(KERN_INFO "hpet%d: %ldns tick, %d %d-bit timers\n",
hpetp->hp_which, ns, hpetp->hp_ntimer,
cap & HPET_COUNTER_SIZE_MASK ? 64 : 32);