Bluetooth: hci_intel: Introduce LPM support
Enable controller Low-Power-Mode if we have a pdev to manage host
wake-up. Once LPM is enabled, controller notifies its TX status via
a vendor specific packet (tx_idle/tx_active).
tx_active means that there is more data upcoming from controller.
tx_idle means that controller can be put in suspended state.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 92bd17e..75b46d3 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -44,6 +44,20 @@
#define STATE_FIRMWARE_LOADED 2
#define STATE_FIRMWARE_FAILED 3
#define STATE_BOOTING 4
+#define STATE_LPM_ENABLED 5
+#define STATE_TX_ACTIVE 6
+
+#define HCI_LPM_PKT 0xf1
+#define HCI_LPM_MAX_SIZE 10
+#define HCI_LPM_HDR_SIZE HCI_EVENT_HDR_SIZE
+
+#define LPM_OP_TX_NOTIFY 0x00
+
+struct hci_lpm_pkt {
+ __u8 opcode;
+ __u8 dlen;
+ __u8 data[0];
+} __packed;
struct intel_device {
struct list_head list;
@@ -316,11 +330,14 @@
{
static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
0x00, 0x08, 0x04, 0x00 };
+ static const u8 lpm_param[] = { 0x03, 0x07, 0x01, 0x0b };
struct intel_data *intel = hu->priv;
+ struct intel_device *idev = NULL;
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
struct intel_version *ver;
struct intel_boot_params *params;
+ struct list_head *p;
const struct firmware *fw;
const u8 *fw_ptr;
char fwname[64];
@@ -680,6 +697,35 @@
BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
+ /* Enable LPM if matching pdev with wakeup enabled */
+ spin_lock(&intel_device_list_lock);
+ list_for_each(p, &intel_device_list) {
+ struct intel_device *dev = list_entry(p, struct intel_device,
+ list);
+ if (hu->tty->dev->parent == dev->pdev->dev.parent) {
+ if (device_may_wakeup(&dev->pdev->dev))
+ idev = dev;
+ break;
+ }
+ }
+ spin_unlock(&intel_device_list_lock);
+
+ if (!idev)
+ goto no_lpm;
+
+ BT_INFO("%s: Enabling LPM", hdev->name);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, sizeof(lpm_param), lpm_param,
+ HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Failed to enable LPM", hdev->name);
+ goto no_lpm;
+ }
+ kfree_skb(skb);
+
+ set_bit(STATE_LPM_ENABLED, &intel->flags);
+
+no_lpm:
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
if (IS_ERR(skb))
return PTR_ERR(skb);
@@ -740,10 +786,51 @@
return hci_recv_frame(hdev, skb);
}
+static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("%s: TX idle notification (%d)", hdev->name, value);
+
+ if (value)
+ set_bit(STATE_TX_ACTIVE, &intel->flags);
+ else
+ clear_bit(STATE_TX_ACTIVE, &intel->flags);
+}
+
+static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_lpm_pkt *lpm = (void *)skb->data;
+
+ switch (lpm->opcode) {
+ case LPM_OP_TX_NOTIFY:
+ if (lpm->dlen)
+ intel_recv_lpm_notify(hdev, lpm->data[0]);
+ break;
+ default:
+ BT_ERR("%s: unknown LPM opcode (%02x)", hdev->name,
+ lpm->opcode);
+ break;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
+#define INTEL_RECV_LPM \
+ .type = HCI_LPM_PKT, \
+ .hlen = HCI_LPM_HDR_SIZE, \
+ .loff = 1, \
+ .lsize = 1, \
+ .maxlen = HCI_LPM_MAX_SIZE
+
static const struct h4_recv_pkt intel_recv_pkts[] = {
- { H4_RECV_ACL, .recv = hci_recv_frame },
- { H4_RECV_SCO, .recv = hci_recv_frame },
- { H4_RECV_EVENT, .recv = intel_recv_event },
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = intel_recv_event },
+ { INTEL_RECV_LPM, .recv = intel_recv_lpm },
};
static int intel_recv(struct hci_uart *hu, const void *data, int count)