drivers/net: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index aa0bf6e..e1b441e 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -110,7 +110,7 @@
}
if (ret && netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return ret;
}
@@ -131,7 +131,7 @@
ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
if (ret && netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
return ret;
}
@@ -156,7 +156,7 @@
ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
if (ret)
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
else
val = rx_buf[slen - 1];
@@ -176,14 +176,14 @@
ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
if (ret && netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return ret;
}
static void enc28j60_soft_reset(struct enc28j60_net *priv)
{
if (netif_msg_hw(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
/* Errata workaround #1, CLKRDY check is unreliable,
@@ -357,7 +357,7 @@
reg = nolock_regw_read(priv, ERDPTL);
if (reg != addr)
printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
- "(0x%04x - 0x%04x)\n", __FUNCTION__, reg, addr);
+ "(0x%04x - 0x%04x)\n", __func__, reg, addr);
}
#endif
spi_read_buf(priv, len, data);
@@ -380,7 +380,7 @@
if (reg != TXSTART_INIT)
printk(KERN_DEBUG DRV_NAME
": %s() ERWPT:0x%04x != 0x%04x\n",
- __FUNCTION__, reg, TXSTART_INIT);
+ __func__, reg, TXSTART_INIT);
}
#endif
/* Set the TXND pointer to correspond to the packet size given */
@@ -390,13 +390,13 @@
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME
": %s() after control byte ERWPT:0x%04x\n",
- __FUNCTION__, nolock_regw_read(priv, EWRPTL));
+ __func__, nolock_regw_read(priv, EWRPTL));
/* copy the packet into the transmit buffer */
spi_write_buf(priv, len, data);
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME
": %s() after write packet ERWPT:0x%04x, len=%d\n",
- __FUNCTION__, nolock_regw_read(priv, EWRPTL), len);
+ __func__, nolock_regw_read(priv, EWRPTL), len);
mutex_unlock(&priv->lock);
}
@@ -495,7 +495,7 @@
if (netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME
": %s() Hardware must be disabled to set "
- "Mac address\n", __FUNCTION__);
+ "Mac address\n", __func__);
ret = -EBUSY;
}
mutex_unlock(&priv->lock);
@@ -575,7 +575,7 @@
if (start > 0x1FFF || end > 0x1FFF || start > end) {
if (netif_msg_drv(priv))
printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
- "bad parameters!\n", __FUNCTION__, start, end);
+ "bad parameters!\n", __func__, start, end);
return;
}
/* set receive buffer start + end */
@@ -591,7 +591,7 @@
if (start > 0x1FFF || end > 0x1FFF || start > end) {
if (netif_msg_drv(priv))
printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
- "bad parameters!\n", __FUNCTION__, start, end);
+ "bad parameters!\n", __func__, start, end);
return;
}
/* set transmit buffer start + end */
@@ -630,7 +630,7 @@
u8 reg;
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __FUNCTION__,
+ printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
priv->full_duplex ? "FullDuplex" : "HalfDuplex");
mutex_lock(&priv->lock);
@@ -661,7 +661,7 @@
if (reg == 0x00 || reg == 0xff) {
if (netif_msg_drv(priv))
printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
- __FUNCTION__, reg);
+ __func__, reg);
return 0;
}
@@ -724,7 +724,7 @@
/* enable interrupts */
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
- __FUNCTION__);
+ __func__);
enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
@@ -888,7 +888,7 @@
if (netif_msg_rx_err(priv))
dev_err(&ndev->dev,
"%s() Invalid packet address!! 0x%04x\n",
- __FUNCTION__, priv->next_pk_ptr);
+ __func__, priv->next_pk_ptr);
/* packet address corrupted: reset RX logic */
mutex_lock(&priv->lock);
nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
@@ -917,7 +917,7 @@
rxstat |= rsv[4];
if (netif_msg_rx_status(priv))
- enc28j60_dump_rsv(priv, __FUNCTION__, next_packet, len, rxstat);
+ enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
if (netif_msg_rx_err(priv))
@@ -941,7 +941,7 @@
enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
len, skb_put(skb, len));
if (netif_msg_pktdata(priv))
- dump_packet(__FUNCTION__, skb->len, skb->data);
+ dump_packet(__func__, skb->len, skb->data);
skb->protocol = eth_type_trans(skb, ndev);
/* update statistics */
ndev->stats.rx_packets++;
@@ -958,7 +958,7 @@
erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
- __FUNCTION__, erxrdpt);
+ __func__, erxrdpt);
mutex_lock(&priv->lock);
nolock_regw_write(priv, ERXRDPTL, erxrdpt);
@@ -968,7 +968,7 @@
reg = nolock_regw_read(priv, ERXRDPTL);
if (reg != erxrdpt)
printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
- "error (0x%04x - 0x%04x)\n", __FUNCTION__,
+ "error (0x%04x - 0x%04x)\n", __func__,
reg, erxrdpt);
}
#endif
@@ -1006,7 +1006,7 @@
mutex_unlock(&priv->lock);
if (netif_msg_rx_status(priv))
printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
- __FUNCTION__, free_space);
+ __func__, free_space);
return free_space;
}
@@ -1022,7 +1022,7 @@
reg = enc28j60_phy_read(priv, PHSTAT2);
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
- "PHSTAT2: %04x\n", __FUNCTION__,
+ "PHSTAT2: %04x\n", __func__,
enc28j60_phy_read(priv, PHSTAT1), reg);
duplex = reg & PHSTAT2_DPXSTAT;
@@ -1095,7 +1095,7 @@
int intflags, loop;
if (netif_msg_intr(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
/* disable further interrupts */
locked_reg_bfclr(priv, EIE, EIE_INTIE);
@@ -1198,7 +1198,7 @@
/* re-enable interrupts */
locked_reg_bfset(priv, EIE, EIE_INTIE);
if (netif_msg_intr(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
}
/*
@@ -1213,7 +1213,7 @@
": Tx Packet Len:%d\n", priv->tx_skb->len);
if (netif_msg_pktdata(priv))
- dump_packet(__FUNCTION__,
+ dump_packet(__func__,
priv->tx_skb->len, priv->tx_skb->data);
enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
@@ -1254,7 +1254,7 @@
struct enc28j60_net *priv = netdev_priv(dev);
if (netif_msg_tx_queued(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
/* If some error occurs while trying to transmit this
* packet, you should return '1' from this function.
@@ -1325,7 +1325,7 @@
struct enc28j60_net *priv = netdev_priv(dev);
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
if (!is_valid_ether_addr(dev->dev_addr)) {
if (netif_msg_ifup(priv)) {
@@ -1363,7 +1363,7 @@
struct enc28j60_net *priv = netdev_priv(dev);
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+ printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
enc28j60_hw_disable(priv);
enc28j60_lowpower(priv, true);