regmap: Implement support for wake IRQs
Allow chips to provide a bank of registers for controlling the wake state
in a similar fashion to the masks and propagate the wake count to the
parent interrupt controller.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index b74e14c..b480b52 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -29,9 +29,13 @@
int irq_base;
struct irq_domain *domain;
+ int irq;
+ int wake_count;
+
unsigned int *status_buf;
unsigned int *mask_buf;
unsigned int *mask_buf_def;
+ unsigned int *wake_buf;
unsigned int irq_reg_stride;
};
@@ -71,6 +75,16 @@
d->chip->mask_base + (i * map->reg_stride));
}
+ /* If we've changed our wakeup count propagate it to the parent */
+ if (d->wake_count < 0)
+ for (i = d->wake_count; i < 0; i++)
+ irq_set_irq_wake(d->irq, 0);
+ else if (d->wake_count > 0)
+ for (i = 0; i < d->wake_count; i++)
+ irq_set_irq_wake(d->irq, 1);
+
+ d->wake_count = 0;
+
mutex_unlock(&d->lock);
}
@@ -92,12 +106,35 @@
d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask;
}
+static int regmap_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+ struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+ struct regmap *map = d->map;
+ const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+
+ if (!d->chip->wake_base)
+ return -EINVAL;
+
+ if (on) {
+ d->wake_buf[irq_data->reg_offset / map->reg_stride]
+ &= ~irq_data->mask;
+ d->wake_count++;
+ } else {
+ d->wake_buf[irq_data->reg_offset / map->reg_stride]
+ |= irq_data->mask;
+ d->wake_count--;
+ }
+
+ return 0;
+}
+
static struct irq_chip regmap_irq_chip = {
.name = "regmap",
.irq_bus_lock = regmap_irq_lock,
.irq_bus_sync_unlock = regmap_irq_sync_unlock,
.irq_disable = regmap_irq_disable,
.irq_enable = regmap_irq_enable,
+ .irq_set_wake = regmap_irq_set_wake,
};
static irqreturn_t regmap_irq_thread(int irq, void *d)
@@ -240,6 +277,14 @@
if (!d->mask_buf_def)
goto err_alloc;
+ if (chip->wake_base) {
+ d->wake_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
+ GFP_KERNEL);
+ if (!d->wake_buf)
+ goto err_alloc;
+ }
+
+ d->irq = irq;
d->map = map;
d->chip = chip;
d->irq_base = irq_base;
@@ -294,6 +339,7 @@
err_domain:
/* Should really dispose of the domain but... */
err_alloc:
+ kfree(d->wake_buf);
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_buf);
@@ -315,6 +361,7 @@
free_irq(irq, d);
/* We should unmap the domain but... */
+ kfree(d->wake_buf);
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_buf);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 56af22e..58ec0cb 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -219,6 +219,7 @@
* @status_base: Base status register address.
* @mask_base: Base mask register address.
* @ack_base: Base ack address. If zero then the chip is clear on read.
+ * @wake_base: Base address for wake enables. If zero unsupported.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
*
* @num_regs: Number of registers in each control bank.
@@ -232,6 +233,7 @@
unsigned int status_base;
unsigned int mask_base;
unsigned int ack_base;
+ unsigned int wake_base;
unsigned int irq_reg_stride;
int num_regs;