ide: lba_capacity_is_ok() -> ata_id_is_lba_capacity_ok()
Rename lba_capacity_is_ok() to ata_id_is_lba_capacity_ok()
and move it to <linux/ata.h> (remove needless parens while at it).
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 587d5aa..43025c9 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -88,56 +88,6 @@
mutex_unlock(&idedisk_ref_mutex);
}
-/*
- * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity"
- * value for this drive (from its reported identification information).
- *
- * Returns: 1 if lba_capacity looks sensible
- * 0 otherwise
- *
- * It is called only once for each drive.
- */
-static int lba_capacity_is_ok(u16 *id)
-{
- unsigned long lba_sects, chs_sects, head, tail;
-
- /* No non-LBA info .. so valid! */
- if (id[ATA_ID_CYLS] == 0)
- return 1;
-
- lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
-
- /*
- * The ATA spec tells large drives to return
- * C/H/S = 16383/16/63 independent of their size.
- * Some drives can be jumpered to use 15 heads instead of 16.
- * Some drives can be jumpered to use 4092 cyls instead of 16383.
- */
- if ((id[ATA_ID_CYLS] == 16383 ||
- (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) &&
- id[ATA_ID_SECTORS] == 63 &&
- (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) &&
- (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS]))
- return 1;
-
- chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS];
-
- /* perform a rough sanity check on lba_sects: within 10% is OK */
- if ((lba_sects - chs_sects) < chs_sects/10)
- return 1;
-
- /* some drives have the word order reversed */
- head = ((lba_sects >> 16) & 0xffff);
- tail = (lba_sects & 0xffff);
- lba_sects = (head | (tail << 16));
- if ((lba_sects - chs_sects) < chs_sects/10) {
- *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects);
- return 1; /* lba_capacity is (now) good */
- }
-
- return 0; /* lba_capacity value may be bad */
-}
-
static const u8 ide_rw_cmds[] = {
ATA_CMD_READ_MULTI,
ATA_CMD_WRITE_MULTI,
@@ -446,7 +396,7 @@
drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
if (hpa)
idedisk_check_hpa(drive);
- } else if (ata_id_has_lba(id) && lba_capacity_is_ok(id)) {
+ } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
/* drive speaks 28-bit LBA */
drive->select.b.lba = 1;
drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);