ide-acpi: init ACPI handles early for devices
Init ACPI handles for devices in ide_acpi_port_init_devices()
and remove no longer needed ide_acpi_drive_get_handle().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 0ac5c78..a3bebba 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -202,40 +202,6 @@
}
/**
- * ide_acpi_drive_get_handle - Get ACPI object handle for a given drive
- * @drive: device to locate
- *
- * Retrieves the object handle of a given drive. According to the ACPI
- * spec the drive is a child of the hwif.
- *
- * Returns handle on success, 0 on error.
- */
-static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- int port;
- acpi_handle drive_handle;
-
- if (!hwif->acpidata)
- return NULL;
-
- if (!hwif->acpidata->obj_handle)
- return NULL;
-
- port = hwif->channel ? drive->dn - 2: drive->dn;
-
- DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
- drive->name, hwif->channel, port);
-
-
- /* TBD: could also check ACPI object VALID bits */
- drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port);
- DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle);
-
- return drive_handle;
-}
-
-/**
* do_drive_get_GTF - get the drive bootup default taskfile settings
* @drive: the drive for which the taskfile settings should be retrieved
* @gtf_length: number of bytes of _GTF data returned at @gtf_address
@@ -290,14 +256,9 @@
goto out;
}
- /* Get this drive's _ADR info. if not already known. */
if (!drive->acpidata->obj_handle) {
- drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
- if (!drive->acpidata->obj_handle) {
- DEBPRINT("No ACPI object found for %s\n",
- drive->name);
- goto out;
- }
+ DEBPRINT("No ACPI object found for %s\n", drive->name);
+ goto out;
}
/* Setting up output buffer */
@@ -652,9 +613,6 @@
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
ide_port_for_each_dev(i, drive, hwif) {
- if (!drive->acpidata->obj_handle)
- drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
-
if (drive->acpidata->obj_handle &&
(drive->dev_flags & IDE_DFLAG_PRESENT)) {
acpi_bus_set_power(drive->acpidata->obj_handle,
@@ -708,6 +666,25 @@
hwif->devices[0]->acpidata = &hwif->acpidata->master;
hwif->devices[1]->acpidata = &hwif->acpidata->slave;
+ /* get _ADR info for each device */
+ ide_port_for_each_dev(i, drive, hwif) {
+ acpi_handle dev_handle;
+
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
+ continue;
+
+ DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
+ drive->name, hwif->channel, drive->dn & 1);
+
+ /* TBD: could also check ACPI object VALID bits */
+ dev_handle = acpi_get_child(hwif->acpidata->obj_handle,
+ drive->dn & 1);
+
+ DEBPRINT("drive %s handle 0x%p\n", drive->name, dev_handle);
+
+ drive->acpidata->obj_handle = dev_handle;
+ }
+
/*
* Send IDENTIFY for each drive
*/