crypto: mv_cesa - Add support for Orion5X crypto engine
This adds support for Marvell's Cryptographic Engines and Security
Accelerator (CESA) which can be found on a few SoC.
Tested with dm-crypt.
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/drivers/crypto/mv_cesa.h b/drivers/crypto/mv_cesa.h
new file mode 100644
index 0000000..c3e25d3
--- /dev/null
+++ b/drivers/crypto/mv_cesa.h
@@ -0,0 +1,119 @@
+#ifndef __MV_CRYPTO_H__
+
+#define DIGEST_INITIAL_VAL_A 0xdd00
+#define DES_CMD_REG 0xdd58
+
+#define SEC_ACCEL_CMD 0xde00
+#define SEC_CMD_EN_SEC_ACCL0 (1 << 0)
+#define SEC_CMD_EN_SEC_ACCL1 (1 << 1)
+#define SEC_CMD_DISABLE_SEC (1 << 2)
+
+#define SEC_ACCEL_DESC_P0 0xde04
+#define SEC_DESC_P0_PTR(x) (x)
+
+#define SEC_ACCEL_DESC_P1 0xde14
+#define SEC_DESC_P1_PTR(x) (x)
+
+#define SEC_ACCEL_CFG 0xde08
+#define SEC_CFG_STOP_DIG_ERR (1 << 0)
+#define SEC_CFG_CH0_W_IDMA (1 << 7)
+#define SEC_CFG_CH1_W_IDMA (1 << 8)
+#define SEC_CFG_ACT_CH0_IDMA (1 << 9)
+#define SEC_CFG_ACT_CH1_IDMA (1 << 10)
+
+#define SEC_ACCEL_STATUS 0xde0c
+#define SEC_ST_ACT_0 (1 << 0)
+#define SEC_ST_ACT_1 (1 << 1)
+
+/*
+ * FPGA_INT_STATUS looks like a FPGA leftover and is documented only in Errata
+ * 4.12. It looks like that it was part of an IRQ-controller in FPGA and
+ * someone forgot to remove it while switching to the core and moving to
+ * SEC_ACCEL_INT_STATUS.
+ */
+#define FPGA_INT_STATUS 0xdd68
+#define SEC_ACCEL_INT_STATUS 0xde20
+#define SEC_INT_AUTH_DONE (1 << 0)
+#define SEC_INT_DES_E_DONE (1 << 1)
+#define SEC_INT_AES_E_DONE (1 << 2)
+#define SEC_INT_AES_D_DONE (1 << 3)
+#define SEC_INT_ENC_DONE (1 << 4)
+#define SEC_INT_ACCEL0_DONE (1 << 5)
+#define SEC_INT_ACCEL1_DONE (1 << 6)
+#define SEC_INT_ACC0_IDMA_DONE (1 << 7)
+#define SEC_INT_ACC1_IDMA_DONE (1 << 8)
+
+#define SEC_ACCEL_INT_MASK 0xde24
+
+#define AES_KEY_LEN (8 * 4)
+
+struct sec_accel_config {
+
+ u32 config;
+#define CFG_OP_MAC_ONLY 0
+#define CFG_OP_CRYPT_ONLY 1
+#define CFG_OP_MAC_CRYPT 2
+#define CFG_OP_CRYPT_MAC 3
+#define CFG_MACM_MD5 (4 << 4)
+#define CFG_MACM_SHA1 (5 << 4)
+#define CFG_MACM_HMAC_MD5 (6 << 4)
+#define CFG_MACM_HMAC_SHA1 (7 << 4)
+#define CFG_ENCM_DES (1 << 8)
+#define CFG_ENCM_3DES (2 << 8)
+#define CFG_ENCM_AES (3 << 8)
+#define CFG_DIR_ENC (0 << 12)
+#define CFG_DIR_DEC (1 << 12)
+#define CFG_ENC_MODE_ECB (0 << 16)
+#define CFG_ENC_MODE_CBC (1 << 16)
+#define CFG_3DES_EEE (0 << 20)
+#define CFG_3DES_EDE (1 << 20)
+#define CFG_AES_LEN_128 (0 << 24)
+#define CFG_AES_LEN_192 (1 << 24)
+#define CFG_AES_LEN_256 (2 << 24)
+
+ u32 enc_p;
+#define ENC_P_SRC(x) (x)
+#define ENC_P_DST(x) ((x) << 16)
+
+ u32 enc_len;
+#define ENC_LEN(x) (x)
+
+ u32 enc_key_p;
+#define ENC_KEY_P(x) (x)
+
+ u32 enc_iv;
+#define ENC_IV_POINT(x) ((x) << 0)
+#define ENC_IV_BUF_POINT(x) ((x) << 16)
+
+ u32 mac_src_p;
+#define MAC_SRC_DATA_P(x) (x)
+#define MAC_SRC_TOTAL_LEN(x) ((x) << 16)
+
+ u32 mac_digest;
+ u32 mac_iv;
+}__attribute__ ((packed));
+ /*
+ * /-----------\ 0
+ * | ACCEL CFG | 4 * 8
+ * |-----------| 0x20
+ * | CRYPT KEY | 8 * 4
+ * |-----------| 0x40
+ * | IV IN | 4 * 4
+ * |-----------| 0x40 (inplace)
+ * | IV BUF | 4 * 4
+ * |-----------| 0x50
+ * | DATA IN | 16 * x (max ->max_req_size)
+ * |-----------| 0x50 (inplace operation)
+ * | DATA OUT | 16 * x (max ->max_req_size)
+ * \-----------/ SRAM size
+ */
+#define SRAM_CONFIG 0x00
+#define SRAM_DATA_KEY_P 0x20
+#define SRAM_DATA_IV 0x40
+#define SRAM_DATA_IV_BUF 0x40
+#define SRAM_DATA_IN_START 0x50
+#define SRAM_DATA_OUT_START 0x50
+
+#define SRAM_CFG_SPACE 0x50
+
+#endif