[ARM] 4963/1: S3C2410 - add basic machine support for the TCT Hammer
Add the TinCanTools Hammer board to list of supported machines in the
arch/arm/mach-s3c2410 directory, as well as a default config entry. the
mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as
the mtd flash layout if enabled in the kernel configuration.
Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
new file mode 100644
index 0000000..d90d445
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c
+ *
+ * Copyright (c) 2007 TinCanTools
+ * David Anders <danders@amltd.com>
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * @History:
+ * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ ***********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+static struct resource tct_hammer_nor_resource = {
+ .start = 0x00000000,
+ .end = 0x01000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition tct_hammer_mtd_partitions[] = {
+ {
+ .name = "System",
+ .size = 0x240000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "JFFS2",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data tct_hammer_flash_data = {
+ .width = 2,
+ .parts = tct_hammer_mtd_partitions,
+ .nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions),
+};
+
+static struct platform_device tct_hammer_device_nor = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &tct_hammer_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &tct_hammer_nor_resource,
+};
+
+#endif
+
+static struct map_desc tct_hammer_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+
+static struct platform_device *tct_hammer_devices[] __initdata = {
+ &s3c_device_adc,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_usb,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &s3c_device_sdi,
+#ifdef CONFIG_MTD_PARTITIONS
+ &tct_hammer_device_nor,
+#endif
+};
+
+static void __init tct_hammer_map_io(void)
+{
+ s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+}
+
+static void __init tct_hammer_init(void)
+{
+ platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
+}
+
+MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = tct_hammer_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = tct_hammer_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END