Merge libata branch 'chs-support' to latest upstream kernel.
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 954d1bc..f8ddc2a 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1,25 +1,36 @@
/*
- libata-scsi.c - helper library for ATA
-
- Copyright 2003-2004 Red Hat, Inc. All rights reserved.
- Copyright 2003-2004 Jeff Garzik
-
- The contents of this file are subject to the Open
- Software License version 1.1 that can be found at
- http://www.opensource.org/licenses/osl-1.1.txt and is included herein
- by reference.
-
- Alternatively, the contents of this file may be used under the terms
- of the GNU General Public License version 2 (the "GPL") as distributed
- in the kernel source COPYING file, in which case the provisions of
- the GPL are applicable instead of the above. If you wish to allow
- the use of your version of this file only under the terms of the
- GPL and not to allow others to use your version of this file under
- the OSL, indicate your decision by deleting the provisions above and
- replace them with the notice and other provisions required by the GPL.
- If you do not delete the provisions above, a recipient may use your
- version of this file under either the OSL or the GPL.
-
+ * libata-scsi.c - helper library for ATA
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2004 Jeff Garzik
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from
+ * - http://www.t10.org/
+ * - http://www.t13.org/
+ *
*/
#include <linux/kernel.h>
@@ -392,6 +403,60 @@
}
/**
+ * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
+ * @qc: Storage for translated ATA taskfile
+ * @scsicmd: SCSI command to translate
+ *
+ * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
+ * (to start). Perhaps these commands should be preceded by
+ * CHECK POWER MODE to see what power mode the device is already in.
+ * [See SAT revision 5 at www.t10.org]
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
+ u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &qc->tf;
+
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf->protocol = ATA_PROT_NODATA;
+ if (scsicmd[1] & 0x1) {
+ ; /* ignore IMMED bit, violates sat-r05 */
+ }
+ if (scsicmd[4] & 0x2)
+ return 1; /* LOEJ bit set not supported */
+ if (((scsicmd[4] >> 4) & 0xf) != 0)
+ return 1; /* power conditions not supported */
+ if (scsicmd[4] & 0x1) {
+ tf->nsect = 1; /* 1 sector, lba=0 */
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
+ } else {
+ tf->nsect = 0; /* time period value (0 implies now) */
+ tf->command = ATA_CMD_STANDBY;
+ /* Consider: ATA STANDBY IMMEDIATE command */
+ }
+ /*
+ * Standby and Idle condition timers could be implemented but that
+ * would require libata to implement the Power condition mode page
+ * and allow the user to change it. Changing mode pages requires
+ * MODE SELECT to be implemented.
+ */
+
+ return 0;
+}
+
+
+/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate (ignored)
@@ -598,7 +663,10 @@
} else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
block |= ((u64)scsicmd[2]) << 8;
block |= ((u64)scsicmd[3]);
+
n_block |= ((u32)scsicmd[4]);
+ if (!n_block)
+ n_block = 256;
VPRINTK("six-byte command\n");
} else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) {
@@ -1509,6 +1577,8 @@
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+ case START_STOP:
+ return ata_scsi_start_stop_xlat;
}
return NULL;