spi: octeon: Add ThunderX driver
Add ThunderX SPI driver using the shared part from the Octeon
driver. The main difference of the ThunderX driver is that it
is a PCI device so probing is different. The system clock settings
can be specified in device tree.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c
new file mode 100644
index 0000000..eff2a13
--- /dev/null
+++ b/drivers/spi/spi-cavium-thunderx.c
@@ -0,0 +1,118 @@
+/*
+ * Cavium ThunderX SPI driver.
+ *
+ * Copyright (C) 2016 Cavium Inc.
+ * Authors: Jan Glauber <jglauber@cavium.com>
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+
+#include "spi-cavium.h"
+
+#define DRV_NAME "spi-thunderx"
+
+#define SYS_FREQ_DEFAULT 700000000 /* 700 Mhz */
+
+static int thunderx_spi_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_master *master;
+ struct octeon_spi *p;
+ int ret;
+
+ master = spi_alloc_master(dev, sizeof(struct octeon_spi));
+ if (!master)
+ return -ENOMEM;
+
+ p = spi_master_get_devdata(master);
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ goto error;
+
+ ret = pci_request_regions(pdev, DRV_NAME);
+ if (ret)
+ goto error;
+
+ p->register_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!p->register_base) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ p->regs.config = 0x1000;
+ p->regs.status = 0x1008;
+ p->regs.tx = 0x1010;
+ p->regs.data = 0x1080;
+
+ p->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(p->clk)) {
+ ret = PTR_ERR(p->clk);
+ goto error;
+ }
+
+ ret = clk_prepare_enable(p->clk);
+ if (ret)
+ goto error;
+
+ p->sys_freq = clk_get_rate(p->clk);
+ if (!p->sys_freq)
+ p->sys_freq = SYS_FREQ_DEFAULT;
+ dev_info(dev, "Set system clock to %u\n", p->sys_freq);
+
+ master->num_chipselect = 4;
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH |
+ SPI_LSB_FIRST | SPI_3WIRE;
+ master->transfer_one_message = octeon_spi_transfer_one_message;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->max_speed_hz = OCTEON_SPI_MAX_CLOCK_HZ;
+ master->dev.of_node = pdev->dev.of_node;
+
+ pci_set_drvdata(pdev, master);
+
+ ret = devm_spi_register_master(dev, master);
+ if (ret)
+ goto error;
+
+ return 0;
+
+error:
+ spi_master_put(master);
+ return ret;
+}
+
+static void thunderx_spi_remove(struct pci_dev *pdev)
+{
+ struct spi_master *master = pci_get_drvdata(pdev);
+ struct octeon_spi *p;
+
+ p = spi_master_get_devdata(master);
+ if (!p)
+ return;
+
+ /* Put everything in a known state. */
+ writeq(0, p->register_base + OCTEON_SPI_CFG(p));
+}
+
+static const struct pci_device_id thunderx_spi_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa00b) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunderx_spi_pci_id_table);
+
+static struct pci_driver thunderx_spi_driver = {
+ .name = DRV_NAME,
+ .id_table = thunderx_spi_pci_id_table,
+ .probe = thunderx_spi_probe,
+ .remove = thunderx_spi_remove,
+};
+
+module_pci_driver(thunderx_spi_driver);
+
+MODULE_DESCRIPTION("Cavium, Inc. ThunderX SPI bus driver");
+MODULE_AUTHOR("Jan Glauber");
+MODULE_LICENSE("GPL");