md: refine reporting of resync/reshape delays.
If 'resync_max' is set to 0 (as is often done when starting a
reshape, so the mdadm can remain in control during a sensitive
period), and if the reshape request is initially delayed because
another array using the same array is resyncing or reshaping etc,
when user-space cannot easily tell when the delay changes from being
due to a conflicting reshape, to being due to resync_max = 0.
So introduce a new state: (curr_resync == 3) to reflect this, make
sure it is visible both via /proc/mdstat and via the "sync_completed"
sysfs attribute, and ensure that the event transition from one delay
state to the other is properly notified.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8d93f86..3c6eaab 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4400,6 +4400,10 @@
if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return sprintf(page, "none\n");
+ if (mddev->curr_resync == 1 ||
+ mddev->curr_resync == 2)
+ return sprintf(page, "delayed\n");
+
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
@@ -6807,7 +6811,11 @@
int scale;
unsigned int per_milli;
- resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
+ if (mddev->curr_resync <= 3)
+ resync = 0;
+ else
+ resync = mddev->curr_resync
+ - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
@@ -7033,7 +7041,7 @@
if (mddev->curr_resync > 2) {
status_resync(seq, mddev);
seq_printf(seq, "\n ");
- } else if (mddev->curr_resync == 1 || mddev->curr_resync == 2)
+ } else if (mddev->curr_resync >= 1)
seq_printf(seq, "\tresync=DELAYED\n ");
else if (mddev->recovery_cp < MaxSector)
seq_printf(seq, "\tresync=PENDING\n ");
@@ -7423,8 +7431,11 @@
"md: resuming %s of %s from checkpoint.\n",
desc, mdname(mddev));
mddev->curr_resync = j;
- }
+ } else
+ mddev->curr_resync = 3; /* no longer delayed */
mddev->curr_resync_completed = j;
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
+ md_new_event(mddev);
blk_start_plug(&plug);
while (j < max_sectors) {
@@ -7477,7 +7488,8 @@
break;
j += sectors;
- if (j>1) mddev->curr_resync = j;
+ if (j > 2)
+ mddev->curr_resync = j;
mddev->curr_mark_cnt = io_sectors;
if (last_check == 0)
/* this is the earliest that rebuild will be
@@ -7599,8 +7611,6 @@
int spares = 0;
int removed = 0;
- mddev->curr_resync_completed = 0;
-
rdev_for_each(rdev, mddev)
if (rdev->raid_disk >= 0 &&
!test_bit(Blocked, &rdev->flags) &&
@@ -7791,6 +7801,7 @@
/* Set RUNNING before clearing NEEDED to avoid
* any transients in the value of "sync_action".
*/
+ mddev->curr_resync_completed = 0;
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
/* Clear some bits that don't mean anything, but
* might be left set
@@ -7804,7 +7815,7 @@
/* no recovery is running.
* remove any failed drives, then
* add spares if possible.
- * Spare are also removed and re-added, to allow
+ * Spares are also removed and re-added, to allow
* the personality to fail the re-add.
*/