Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/mm: Lockless get_user_pages_fast() for 64-bit (v3)
powerpc: Don't use the wrong thread_struct for ptrace get/set VSX regs
powerpc: Fix ptrace buffer size for VSX
powerpc: Correctly hookup PTRACE_GET/SETVSRREGS for 32 bit processes
ide/powermac: Fix use of uninitialized pointer on media-bay
powerpc: Allow non-hcall return values for lparcfg writes
ipmi/powerpc: Use linux/of_{device,platform}.h instead of asm
powerpc/fsl: proliferate simple-bus compatibility to soc nodes
Documentation: remove old sbc8260 board specific information
cpm2: Rework baud rate generators configuration to support external clocks.
powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC
cpm_uart: Add generic clock API support to set baudrates
cpm_uart: Modem control lines support
powerpc: implement GPIO LIB API on CPM1 Freescale SoC.
cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.
powerpc: Fix 8xx build failure
powerpc: clean up the Book-E HW watchpoint support
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 3be84aa..29d839c 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -20,8 +20,6 @@
- MPC5200 Device Tree Bindings
ppc_htab.txt
- info about the Linux/PPC /proc/ppc_htab entry
-SBC8260_memory_mapping.txt
- - EST SBC8260 board info
smp.txt
- use and state info about Linux/PPC on MP machines
sound.txt
diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt
deleted file mode 100644
index e6e9ee0..0000000
--- a/Documentation/powerpc/SBC8260_memory_mapping.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
-if you have questions, comments or corrections.
-
- * EST SBC8260 Linux memory mapping rules
-
- http://www.estc.com/
- http://www.estc.com/products/boards/SBC8260-8240_ds.html
-
- Initial conditions:
- -------------------
-
- Tasks that need to be perform by the boot ROM before control is
- transferred to zImage (compressed Linux kernel):
-
- - Define the IMMR to 0xf0000000
-
- - Initialize the memory controller so that RAM is available at
- physical address 0x00000000. On the SBC8260 is this 16M (64M)
- SDRAM.
-
- - The boot ROM should only clear the RAM that it is using.
-
- The reason for doing this is to enhances the chances of a
- successful post mortem on a Linux panic. One of the first
- items to examine is the 16k (LOG_BUF_LEN) circular console
- buffer called log_buf which is defined in kernel/printk.c.
-
- - To enhance boot ROM performance, the I-cache can be enabled.
-
- Date: Mon, 22 May 2000 14:21:10 -0700
- From: Neil Russell <caret@c-side.com>
-
- LiMon (LInux MONitor) runs with and starts Linux with MMU
- off, I-cache enabled, D-cache disabled. The I-cache doesn't
- need hints from the MMU to work correctly as the D-cache
- does. No D-cache means no special code to handle devices in
- the presence of cache (no snooping, etc). The use of the
- I-cache means that the monitor can run acceptably fast
- directly from ROM, rather than having to copy it to RAM.
-
- - Build the board information structure (see
- include/asm-ppc/est8260.h for its definition)
-
- - The compressed Linux kernel (zImage) contains a bootstrap loader
- that is position independent; you can load it into any RAM,
- ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
- at its link address of 0x00400000 (4 MB).
-
- Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
- then zImage will skip the step of moving itself to
- its link address.
-
- - Load R3 with the address of the board information structure
-
- - Transfer control to zImage
-
- - The Linux console port is SMC1, and the baud rate is controlled
- from the bi_baudrate field of the board information structure.
- On thing to keep in mind when picking the baud rate, is that
- there is no flow control on the SMC ports. I would stick
- with something safe and standard like 19200.
-
- On the EST SBC8260, the SMC1 port is on the COM1 connector of
- the board.
-
-
- EST SBC8260 defaults:
- ---------------------
-
- Chip
- Memory Sel Bus Use
- --------------------- --- --- ----------------------------------
- 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM
- 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board)
- 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM)
- 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write)
- 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM
- 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board)
- 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM)
-
- Notes:
- ------
-
- - The chip selects can map 32K blocks and up (powers of 2)
-
- - The SDRAM machine can handled up to 128Mbytes per chip select
-
- - Linux uses the 60x bus memory (the SDRAM DIMM) for the
- communications buffers.
-
- - BATs can map 128K-256Mbytes each. There are four data BATs and
- four instruction BATs. Generally the data and instruction BATs
- are mapped the same.
-
- - The IMMR must be set above the kernel virtual memory addresses,
- which start at 0xC0000000. Otherwise, the kernel may crash as
- soon as you start any threads or processes due to VM collisions
- in the kernel or user process space.
-
-
- Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:
-
- The user application virtual space consumes the first 2 Gbytes
- (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at
- 0xC0000000, with data following. There is a "protection hole"
- between the end of kernel data and the start of the kernel
- dynamically allocated space, but this space is still within
- 0xCxxxxxxx.
-
- Obviously the kernel can't map any physical addresses 1:1 in
- these ranges.
-
-
- Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:
-
- During the early kernel initialization, the kernel virtual
- memory allocator is not operational. Prior to this KVM
- initialization, we choose to map virtual to physical addresses
- 1:1. That is, the kernel virtual address exactly matches the
- physical address on the bus. These mappings are typically done
- in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only
- absolutely necessary mappings should be done at this time, for
- example board control registers or a serial uart. Normal device
- driver initialization should map resources later when necessary.
-
- Although platform dependent, and certainly the case for embedded
- 8xx, traditionally memory is mapped at physical address zero,
- and I/O devices above physical address 0x80000000. The lowest
- and highest (above 0xf0000000) I/O addresses are traditionally
- used for devices or registers we need to map during kernel
- initialization and prior to KVM operation. For this reason,
- and since it followed prior PowerPC platform examples, I chose
- to map the embedded 8xx kernel to the 0xc0000000 virtual address.
- This way, we can enable the MMU to map the kernel for proper
- operation, and still map a few windows before the KVM is operational.
-
- On some systems, you could possibly run the kernel at the
- 0x80000000 or any other virtual address. It just depends upon
- mapping that must be done prior to KVM operational. You can never
- map devices or kernel spaces that overlap with the user virtual
- space. This is why default IMMR mapping used by most BDM tools
- won't work. They put the IMMR at something like 0x10000000 or
- 0x02000000 for example. You simply can't map these addresses early
- in the kernel, and continue proper system operation.
-
- The embedded 8xx/82xx kernel is mature enough that all you should
- need to do is map the IMMR someplace at or above 0xf0000000 and it
- should boot far enough to get serial console messages and KGDB
- connected on any platform. There are lots of other subtle memory
- management design features that you simply don't need to worry
- about. If you are changing functions related to MMU initialization,
- you are likely breaking things that are known to work and are
- heading down a path of disaster and frustration. Your changes
- should be to make the flexibility of the processor fit Linux,
- not force arbitrary and non-workable memory mappings into Linux.
-
- - You don't want to change KERNELLOAD or KERNELBASE, otherwise the
- virtual memory and MMU code will get confused.
-
- arch/ppc/Makefile:KERNELLOAD = 0xc0000000
-
- include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000
- include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET
-
- - RAM is at physical address 0x00000000, and gets mapped to
- virtual address 0xC0000000 for the kernel.
-
-
- Physical addresses used by the Linux kernel:
- --------------------------------------------
-
- 0x00000000-0x3FFFFFFF 1GB reserved for RAM
- 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory,
- 64K for 8260 registers
-
-
- Logical addresses used by the Linux kernel:
- -------------------------------------------
-
- 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers)
- 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards)
- 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM)
- 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte)
-
-
- EST SBC8260 Linux mapping:
- --------------------------
-
- DBAT0, IBAT0, cache inhibited:
-
- Chip
- Memory Sel Use
- --------------------- --- ---------------------------------
- 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers
-
- DBAT1, IBAT1, cache inhibited:
-
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
index b35f348..2ea76d9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
@@ -7,6 +7,15 @@
- fsl,cpm2-scc-uart
- fsl,qe-uart
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
Example:
serial@11a00 {
@@ -18,4 +27,6 @@
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <00800000>;
+ gpios = <&gpio_c 15 0
+ &gpio_d 29 0>;
};
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 587da5e..63c9caf 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@
bool
default y
+config HAVE_GET_USER_PAGES_FAST
+ def_bool PPC64
+
config HAVE_SETUP_PER_CPU_AREA
def_bool PPC64
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743..fbc9304 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045..b157d18 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab56..700e076 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca349..cdd3063 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb..783241c 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae..a3b76a7 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d65..89c9202 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
};
crypto@30000 {
- compatible = "fsl,sec2-crypto";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <11 8>;
+ interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x7e>;
- /*
- * desc mask is for rev1.x, we need runtime fixup
- * for >=2.x
- */
- descriptor-types-mask = <0x1010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb..432782b 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76..ed32c8d 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a89..f4db9ed 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24..1505d68 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
reg = <0xffe00000 0x1000>;
bus-frequency = <0>; // Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a8..9568bfa 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x100000>; // CCSRBAR 1M
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f1..6480f4f 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d..f1fb207 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466b..431b496 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a780..d833a5c 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159d..4d1f2f2 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x200>;
bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34..a15f103 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3..e124dd1 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 9f856a0..1a09719 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -636,10 +636,6 @@
retval = -EIO;
} else if (retval == H_PARAMETER) {
retval = -EINVAL;
- } else {
- printk(KERN_WARNING "%s: received unknown hv return code %ld",
- __func__, retval);
- retval = -EIO;
}
return retval;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 6b66cd8..3635be6 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -375,7 +375,7 @@
flush_vsx_to_thread(target);
for (i = 0; i < 32 ; i++)
- buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+ buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
@@ -394,7 +394,7 @@
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
for (i = 0; i < 32 ; i++)
- current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+ target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
return ret;
@@ -975,15 +975,13 @@
case PTRACE_GETVSRREGS:
return copy_regset_to_user(child, &user_ppc_native_view,
REGSET_VSX,
- 0, (32 * sizeof(vector128) +
- sizeof(u32)),
+ 0, 32 * sizeof(double),
(void __user *) data);
case PTRACE_SETVSRREGS:
return copy_regset_from_user(child, &user_ppc_native_view,
REGSET_VSX,
- 0, (32 * sizeof(vector128) +
- sizeof(u32)),
+ 0, 32 * sizeof(double),
(const void __user *) data);
#endif
#ifdef CONFIG_SPE
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1..197d49c 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@
case PTRACE_SETFPREGS:
case PTRACE_GETVRREGS:
case PTRACE_SETVRREGS:
+ case PTRACE_GETVSRREGS:
+ case PTRACE_SETVSRREGS:
case PTRACE_GETREGS64:
case PTRACE_SETREGS64:
case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e01..e7392b45 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@
mmu_context_$(CONFIG_WORD_SIZE).o
hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC64) += hash_utils_64.o \
- slb_low.o slb.o stab.o mmap.o $(hash-y)
+ slb_low.o slb.o stab.o \
+ gup.o mmap.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 0000000..9fdf4d6
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr)
+{
+ unsigned long mask, result;
+ pte_t *ptep;
+
+ result = _PAGE_PRESENT|_PAGE_USER;
+ if (write)
+ result |= _PAGE_RW;
+ mask = result | _PAGE_SPECIAL;
+
+ ptep = pte_offset_kernel(&pmd, addr);
+ do {
+ pte_t pte = *ptep;
+ struct page *page;
+
+ if ((pte_val(pte) & mask) != result)
+ return 0;
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+ page = pte_page(pte);
+ if (!page_cache_get_speculative(page))
+ return 0;
+ if (unlikely(pte != *ptep)) {
+ put_page(page);
+ return 0;
+ }
+ pages[*nr] = page;
+ (*nr)++;
+
+ } while (ptep++, addr += PAGE_SIZE, addr != end);
+
+ return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+ unsigned long *addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long mask;
+ unsigned long pte_end;
+ struct page *head, *page;
+ pte_t pte;
+ int refs;
+
+ pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+ if (pte_end < end)
+ end = pte_end;
+
+ pte = *ptep;
+ mask = _PAGE_PRESENT|_PAGE_USER;
+ if (write)
+ mask |= _PAGE_RW;
+ if ((pte_val(pte) & mask) != mask)
+ return 0;
+ /* hugepages are never "special" */
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+ refs = 0;
+ head = pte_page(pte);
+ page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+ do {
+ VM_BUG_ON(compound_head(page) != head);
+ pages[*nr] = page;
+ (*nr)++;
+ page++;
+ refs++;
+ } while (*addr += PAGE_SIZE, *addr != end);
+
+ if (!page_cache_add_speculative(head, refs)) {
+ *nr -= refs;
+ return 0;
+ }
+ if (unlikely(pte != *ptep)) {
+ /* Could be optimized better */
+ while (*nr) {
+ put_page(page);
+ (*nr)--;
+ }
+ }
+
+ return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long next;
+ pmd_t *pmdp;
+
+ pmdp = pmd_offset(&pud, addr);
+ do {
+ pmd_t pmd = *pmdp;
+
+ next = pmd_addr_end(addr, end);
+ if (pmd_none(pmd))
+ return 0;
+ if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+ return 0;
+ } while (pmdp++, addr = next, addr != end);
+
+ return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long next;
+ pud_t *pudp;
+
+ pudp = pud_offset(&pgd, addr);
+ do {
+ pud_t pud = *pudp;
+
+ next = pud_addr_end(addr, end);
+ if (pud_none(pud))
+ return 0;
+ if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+ return 0;
+ } while (pudp++, addr = next, addr != end);
+
+ return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+ struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr, len, end;
+ unsigned long next;
+ pgd_t *pgdp;
+ int psize, nr = 0;
+ unsigned int shift;
+
+ pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+ start &= PAGE_MASK;
+ addr = start;
+ len = (unsigned long) nr_pages << PAGE_SHIFT;
+ end = start + len;
+
+ if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+ start, len)))
+ goto slow_irqon;
+
+ pr_debug(" aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+ /* We bail out on slice boundary crossing when hugetlb is
+ * enabled in order to not have to deal with two different
+ * page table formats
+ */
+ if (addr < SLICE_LOW_TOP) {
+ if (end > SLICE_LOW_TOP)
+ goto slow_irqon;
+
+ if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+ GET_LOW_SLICE_INDEX(end - 1)))
+ goto slow_irqon;
+ } else {
+ if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+ GET_HIGH_SLICE_INDEX(end - 1)))
+ goto slow_irqon;
+ }
+#endif /* CONFIG_HUGETLB_PAGE */
+
+ /*
+ * XXX: batch / limit 'nr', to avoid large irq off latency
+ * needs some instrumenting to determine the common sizes used by
+ * important workloads (eg. DB2), and whether limiting the batch size
+ * will decrease performance.
+ *
+ * It seems like we're in the clear for the moment. Direct-IO is
+ * the main guy that batches up lots of get_user_pages, and even
+ * they are limited to 64-at-a-time which is not so many.
+ */
+ /*
+ * This doesn't prevent pagetable teardown, but does prevent
+ * the pagetables from being freed on powerpc.
+ *
+ * So long as we atomically load page table pointers versus teardown,
+ * we can follow the address down to the the page and take a ref on it.
+ */
+ local_irq_disable();
+
+ psize = get_slice_psize(mm, addr);
+ shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+ if (unlikely(mmu_huge_psizes[psize])) {
+ pte_t *ptep;
+ unsigned long a = addr;
+ unsigned long sz = ((1UL) << shift);
+ struct hstate *hstate = size_to_hstate(sz);
+
+ BUG_ON(!hstate);
+ /*
+ * XXX: could be optimized to avoid hstate
+ * lookup entirely (just use shift)
+ */
+
+ do {
+ VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+ ptep = huge_pte_offset(mm, a);
+ pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+ if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+ &nr))
+ goto slow;
+ } while (a != end);
+ } else
+#endif /* CONFIG_HUGETLB_PAGE */
+ {
+ pgdp = pgd_offset(mm, addr);
+ do {
+ pgd_t pgd = *pgdp;
+
+ VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+ pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd);
+ next = pgd_addr_end(addr, end);
+ if (pgd_none(pgd))
+ goto slow;
+ if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ goto slow;
+ } while (pgdp++, addr = next, addr != end);
+ }
+ local_irq_enable();
+
+ VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+ return nr;
+
+ {
+ int ret;
+
+slow:
+ local_irq_enable();
+slow_irqon:
+ pr_debug(" slow path ! nr = %d\n", nr);
+
+ /* Try to get the remaining pages with get_user_pages */
+ start += nr << PAGE_SHIFT;
+ pages += nr;
+
+ down_read(&mm->mmap_sem);
+ ret = get_user_pages(current, mm, start,
+ (end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+ up_read(&mm->mmap_sem);
+
+ /* Have to be a bit careful with return values */
+ if (nr > 0) {
+ if (ret < 0)
+ ret = nr;
+ else
+ ret += nr;
+ }
+
+ return ret;
+ }
+}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dd4be4a..ec43477 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@
static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index f049d69..0300268 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@
static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 7301d77..76092d3 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,6 +41,7 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 30d509a..fc3f2ed 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -111,6 +111,7 @@
static struct of_device_id mpc834x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 75b80e8..9d46e5bd 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@
static struct of_device_id mpc836x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index fc21f5c..156c4e2 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -83,6 +83,7 @@
static struct __initdata of_device_id sbc834x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145ade..8a3b117 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@
static struct of_device_id __initdata of_bus_ids[] = {
{ .type = "soc", },
+ { .type = "simple-bus", },
{ .name = "cpm", },
{ .name = "localbus", },
{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa..1bf5aef 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@
static struct of_device_id __initdata mpc8536_ds_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6..d17807a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@
{ .type = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 00c5358..483b65c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -186,6 +186,7 @@
static struct of_device_id __initdata mpc85xxds_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f..2494c51 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd..6509ade 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@
{ .type = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e..71d7562 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@
If in doubt, say Y here.
+config 8xx_GPIO
+ bool "GPIO API Support"
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Saying Y here will cause the ports on an MPC8xx processor to be used
+ with the GPIO API. If you say N here, the kernel needs less memory.
+
+ If in doubt, say Y here.
+
config 8xx_CPU6
bool "CPU6 Silicon Errata (860 Pre Rev. C)"
help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 1d09687..4c900ef 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -254,6 +254,8 @@
select CPM
select PPC_LIB_RHEAP
select PPC_PCI_CHOICE
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
help
The CPM2 (Communications Processor Module) is a coprocessor on
embedded CPUs made by Freescale. Selecting this option means that
@@ -281,6 +283,7 @@
config CPM
bool
+ select PPC_CLOCK
config OF_RTC
bool
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42..4a04823 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/spinlock.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
#include <asm/fs_pd.h>
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
#define CPM_MAP_SIZE (0x4000)
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
@@ -290,20 +295,24 @@
__be16 res[3];
};
-struct cpm_ioport32 {
- __be32 dir, par, sor;
+struct cpm_ioport32b {
+ __be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+ __be32 dir, par, sor, odr, dat;
};
static void cpm1_set_pin32(int port, int pin, int flags)
{
- struct cpm_ioport32 __iomem *iop;
+ struct cpm_ioport32e __iomem *iop;
pin = 1 << (31 - pin);
if (port == CPM_PORTB)
- iop = (struct cpm_ioport32 __iomem *)
+ iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pbdir;
else
- iop = (struct cpm_ioport32 __iomem *)
+ iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pedir;
if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@
return 0;
}
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+ cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u16 pin_mask = 1 << (15 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be16(&iop->dat, cpm1_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ setbits16(&iop->dir, pin_mask);
+
+ cpm1_gpio16_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ clrbits16(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+ struct cpm1_gpio16_chip *cpm1_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+ if (!cpm1_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm1_gc->lock);
+
+ mm_gc = &cpm1_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm1_gpio16_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 16;
+ gc->direction_input = cpm1_gpio16_dir_in;
+ gc->direction_output = cpm1_gpio16_dir_out;
+ gc->get = cpm1_gpio16_get;
+ gc->set = cpm1_gpio16_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+ cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be32(&iop->dat, cpm1_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ setbits32(&iop->dir, pin_mask);
+
+ cpm1_gpio32_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ clrbits32(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+ struct cpm1_gpio32_chip *cpm1_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+ if (!cpm1_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm1_gc->lock);
+
+ mm_gc = &cpm1_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm1_gpio32_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 32;
+ gc->direction_input = cpm1_gpio32_dir_in;
+ gc->direction_output = cpm1_gpio32_dir_out;
+ gc->get = cpm1_gpio32_get;
+ gc->set = cpm1_gpio32_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+ cpm1_gpiochip_add16(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+ cpm1_gpiochip_add32(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+ cpm1_gpiochip_add16(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+ cpm1_gpiochip_add16(np);
+
+ /* Port E uses CPM2 layout */
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+ cpm2_gpiochip_add32(np);
+ return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5df..f1c3395 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
-#define BRG_INT_CLK (get_brgfreq())
-#define BRG_UART_CLK (BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
{
u32 __iomem *bp;
+ u32 val;
/* This is good enough to get SMCs running.....
*/
@@ -135,34 +129,14 @@
brg -= 4;
}
bp += brg;
- out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
- cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
- u32 __iomem *bp;
- u32 val;
-
- if (brg < 4) {
- bp = cpm2_map_size(im_brgc1, 16);
- } else {
- bp = cpm2_map_size(im_brgc5, 16);
- brg -= 4;
- }
- bp += brg;
- val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+ val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
if (div16)
val |= CPM_BRG_DIV16;
out_be32(bp, val);
cpm2_unmap(bp);
}
+EXPORT_SYMBOL(__cpm2_setbrg);
int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
{
@@ -377,3 +351,14 @@
else
clrbits32(&iop[port].odr, pin);
}
+
+static int cpm_init_par_io(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+ cpm2_gpiochip_add32(np);
+ return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296..53da8a07 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
#include <linux/init.h>
#include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
#include <asm/udbg.h>
#include <asm/io.h>
@@ -28,6 +30,10 @@
#include <mm/mmu_decl.h>
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
static u32 __iomem *cpm_udbg_txdesc =
(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,120 @@
return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
}
EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+ u32 dir, par, sor, odr, dat;
+ u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+ cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
+
+ spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+ if (value)
+ cpm2_gc->cpdata |= pin_mask;
+ else
+ cpm2_gc->cpdata &= ~pin_mask;
+
+ out_be32(&iop->dat, cpm2_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ setbits32(&iop->dir, pin_mask);
+
+ cpm2_gpio32_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ clrbits32(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+ struct cpm2_gpio32_chip *cpm2_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+ if (!cpm2_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm2_gc->lock);
+
+ mm_gc = &cpm2_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm2_gpio32_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 32;
+ gc->direction_input = cpm2_gpio32_dir_in;
+ gc->direction_output = cpm2_gpio32_dir_out;
+ gc->get = cpm2_gpio32_get;
+ gc->set = cpm2_gpio32_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0..c1879eb 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@
struct device_node *np;
struct platform_device *pd;
struct resource res[2];
+ unsigned int num_res = 1;
int ret;
memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@
if (res[0].start != RTC_PORT(0))
return -EINVAL;
- /* Use a fixed interrupt value of 8 since on PPC if we are using this
- * its off an i8259 which we ensure has interrupt numbers 0..15. */
- res[1].start = 8;
- res[1].end = 8;
- res[1].flags = IORESOURCE_IRQ;
+ np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+ if (!np)
+ np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+ if (np) {
+ of_node_put(np);
+ /*
+ * Use a fixed interrupt value of 8 since on PPC if we are
+ * using this its off an i8259 which we ensure has interrupt
+ * numbers 0..15.
+ */
+ res[1].start = 8;
+ res[1].end = 8;
+ res[1].flags = IORESOURCE_IRQ;
+ num_res++;
+ }
pd = platform_device_register_simple("rtc_cmos", -1,
- &res[0], 2);
+ &res[0], num_res);
if (IS_ERR(pd))
return PTR_ERR(pd);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 1926883..f52931e 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -66,8 +66,8 @@
#include <linux/ctype.h>
#ifdef CONFIG_PPC_OF
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
#endif
#define PFX "ipmi_si: "
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c521bf6..fa2be26 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1086,6 +1086,11 @@
/* Make sure we have sane timings */
sanitize_timings(pmif);
+ host = ide_host_alloc(&d, hws);
+ if (host == NULL)
+ return -ENOMEM;
+ hwif = host->ports[0];
+
#ifndef CONFIG_PPC64
/* XXX FIXME: Media bay stuff need re-organizing */
if (np->parent && np->parent->name
@@ -1119,11 +1124,11 @@
pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hw->irq);
- rc = ide_host_add(&d, hws, &host);
- if (rc)
+ rc = ide_host_register(host, &d, hws);
+ if (rc) {
+ ide_host_free(host);
return rc;
-
- hwif = host->ports[0];
+ }
return 0;
}
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0a..7274b52 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
#define SCC_WAIT_CLOSING 100
+#define GPIO_CTS 0
+#define GPIO_RTS 1
+#define GPIO_DCD 2
+#define GPIO_DSR 3
+#define GPIO_DTR 4
+#define GPIO_RI 5
+
+#define NUM_GPIOS (GPIO_RI+1)
+
struct uart_cpm_port {
struct uart_port port;
u16 rx_nrfifos;
@@ -68,6 +77,7 @@
unsigned char *rx_buf;
u32 flags;
void (*set_lineif)(struct uart_cpm_port *);
+ struct clk *clk;
u8 brg;
uint dp_addr;
void *mem_addr;
@@ -82,6 +92,7 @@
int wait_closing;
/* value to combine with opcode to form cpm command */
u32 command;
+ int gpios[NUM_GPIOS];
};
extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f8692..25efca5 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,9 @@
#include <linux/dma-mapping.h>
#include <linux/fs_uart_pd.h>
#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -96,13 +99,41 @@
static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* Whee. Do nothing. */
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ if (pinfo->gpios[GPIO_RTS] >= 0)
+ gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+ if (pinfo->gpios[GPIO_DTR] >= 0)
+ gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
}
static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
{
- /* Whee. Do nothing. */
- return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+ if (pinfo->gpios[GPIO_CTS] >= 0) {
+ if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+ mctrl &= ~TIOCM_CTS;
+ }
+
+ if (pinfo->gpios[GPIO_DSR] >= 0) {
+ if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+ mctrl &= ~TIOCM_DSR;
+ }
+
+ if (pinfo->gpios[GPIO_DCD] >= 0) {
+ if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+ mctrl &= ~TIOCM_CAR;
+ }
+
+ if (pinfo->gpios[GPIO_RI] >= 0) {
+ if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+ mctrl |= TIOCM_RNG;
+ }
+
+ return mctrl;
}
/*
@@ -566,7 +597,10 @@
out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
}
- cpm_set_brg(pinfo->brg - 1, baud);
+ if (pinfo->clk)
+ clk_set_rate(pinfo->clk, baud);
+ else
+ cpm_set_brg(pinfo->brg - 1, baud);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -991,14 +1025,23 @@
void __iomem *mem, *pram;
int len;
int ret;
+ int i;
- data = of_get_property(np, "fsl,cpm-brg", &len);
- if (!data || len != 4) {
- printk(KERN_ERR "CPM UART %s has no/invalid "
- "fsl,cpm-brg property.\n", np->name);
- return -EINVAL;
+ data = of_get_property(np, "clock", NULL);
+ if (data) {
+ struct clk *clk = clk_get(NULL, (const char*)data);
+ if (!IS_ERR(clk))
+ pinfo->clk = clk;
}
- pinfo->brg = *data;
+ if (!pinfo->clk) {
+ data = of_get_property(np, "fsl,cpm-brg", &len);
+ if (!data || len != 4) {
+ printk(KERN_ERR "CPM UART %s has no/invalid "
+ "fsl,cpm-brg property.\n", np->name);
+ return -EINVAL;
+ }
+ pinfo->brg = *data;
+ }
data = of_get_property(np, "fsl,cpm-command", &len);
if (!data || len != 4) {
@@ -1050,6 +1093,9 @@
goto out_pram;
}
+ for (i = 0; i < NUM_GPIOS; i++)
+ pinfo->gpios[i] = of_get_gpio(np, i);
+
return cpm_uart_request_port(&pinfo->port);
out_pram:
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 63a5533..24d79e3 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -3,6 +3,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
+#include <linux/of.h>
/* Opcodes common to CPM1 and CPM2
*/
@@ -100,4 +101,6 @@
dma_addr_t cpm_muram_dma(void __iomem *addr);
int cpm_command(u32 command, u8 opcode);
+int cpm2_gpiochip_add32(struct device_node *np);
+
#endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 2c7fd9c..2a6fa01 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -12,6 +12,7 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
#ifdef CONFIG_PPC_85xx
#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@
#define cpm_dpfree cpm_muram_free
#define cpm_dpram_addr cpm_muram_addr
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
extern void cpm2_reset(void);
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK (get_brgfreq())
+#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+ __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+ __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
/* Function code bits, usually generic to devices.
*/
#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
@@ -195,17 +226,6 @@
#define SMCM_TX ((unsigned char)0x02)
#define SMCM_RX ((unsigned char)0x01)
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
/* SCCs.
*/
#define SCC_GSMRH_IRP ((uint)0x00040000)
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index 5fc78c0..74c6f38 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -461,6 +461,8 @@
return pt;
}
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a39b38c..69ed3cb 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -143,6 +143,29 @@
return 1;
}
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+ VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+ VM_BUG_ON(!in_atomic());
+# endif
+ VM_BUG_ON(page_count(page) == 0);
+ atomic_add(count, &page->_count);
+
+#else
+ if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+ return 0;
+#endif
+ VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+ return 1;
+}
+
static inline int page_freeze_refs(struct page *page, int count)
{
return likely(atomic_cmpxchg(&page->_count, count, 0) == count);