iwlagn: clean up of transport layer
Move a few declarations needed by the transport layer to iwl-shared.h
Move iwl_cmd_meta, iwl_tx_queue and friends to the internal transport
header file.
Move iwl_device_cmd iwl_host_cmd and friends to iwl-trans.h since
these structs are used in the API to the transport layer.
Move get_cmd_string to the upper layer with a declaration in
iwl-shared.h.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h b/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h
index f76526e..c5720cd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h
@@ -32,6 +32,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/skbuff.h>
+#include <linux/pci.h>
#include "iwl-fh.h"
#include "iwl-csr.h"
@@ -114,6 +115,97 @@
*/
#define IWL_IPAN_MCAST_QUEUE 8
+struct iwl_cmd_meta {
+ /* only for SYNC commands, iff the reply skb is wanted */
+ struct iwl_host_cmd *source;
+ /*
+ * only for ASYNC commands
+ * (which is somewhat stupid -- look at iwl-sta.c for instance
+ * which duplicates a bunch of code because the callback isn't
+ * invoked for SYNC commands, if it were and its result passed
+ * through it would be simpler...)
+ */
+ void (*callback)(struct iwl_shared *shrd,
+ struct iwl_device_cmd *cmd,
+ struct iwl_rx_packet *pkt);
+
+ u32 flags;
+
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_LEN(len);
+};
+
+/*
+ * Generic queue structure
+ *
+ * Contains common data for Rx and Tx queues.
+ *
+ * Note the difference between n_bd and n_window: the hardware
+ * always assumes 256 descriptors, so n_bd is always 256 (unless
+ * there might be HW changes in the future). For the normal TX
+ * queues, n_window, which is the size of the software queue data
+ * is also 256; however, for the command queue, n_window is only
+ * 32 since we don't need so many commands pending. Since the HW
+ * still uses 256 BDs for DMA though, n_bd stays 256. As a result,
+ * the software buffers (in the variables @meta, @txb in struct
+ * iwl_tx_queue) only have 32 entries, while the HW buffers (@tfds
+ * in the same struct) have 256.
+ * This means that we end up with the following:
+ * HW entries: | 0 | ... | N * 32 | ... | N * 32 + 31 | ... | 255 |
+ * SW entries: | 0 | ... | 31 |
+ * where N is a number between 0 and 7. This means that the SW
+ * data is a window overlayed over the HW queue.
+ */
+struct iwl_queue {
+ int n_bd; /* number of BDs in this queue */
+ int write_ptr; /* 1-st empty entry (index) host_w*/
+ int read_ptr; /* last used entry (index) host_r*/
+ /* use for monitoring and recovering the stuck queue */
+ dma_addr_t dma_addr; /* physical addr for BD's */
+ int n_window; /* safe queue window */
+ u32 id;
+ int low_mark; /* low watermark, resume queue if free
+ * space more than this */
+ int high_mark; /* high watermark, stop queue if free
+ * space less than this */
+};
+
+/**
+ * struct iwl_tx_queue - Tx Queue for DMA
+ * @q: generic Rx/Tx queue descriptor
+ * @bd: base of circular buffer of TFDs
+ * @cmd: array of command/TX buffer pointers
+ * @meta: array of meta data for each command/tx buffer
+ * @dma_addr_cmd: physical address of cmd/tx buffer array
+ * @txb: array of per-TFD driver data
+ * @time_stamp: time (in jiffies) of last read_ptr change
+ * @need_update: indicates need to update read/write index
+ * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
+ * @sta_id: valid if sched_retry is set
+ * @tid: valid if sched_retry is set
+ *
+ * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
+ * descriptors) and required locking structures.
+ */
+#define TFD_TX_CMD_SLOTS 256
+#define TFD_CMD_SLOTS 32
+
+struct iwl_tx_queue {
+ struct iwl_queue q;
+ struct iwl_tfd *tfds;
+ struct iwl_device_cmd **cmd;
+ struct iwl_cmd_meta *meta;
+ struct sk_buff **skbs;
+ unsigned long time_stamp;
+ u8 need_update;
+ u8 sched_retry;
+ u8 active;
+ u8 swq_id;
+
+ u16 sta_id;
+ u16 tid;
+};
+
/**
* struct iwl_trans_pcie - PCIe transport specific data
* @rxq: all the RX queue data