drm: Extract drm_connector.[hc]
Pulls in quite a lot of connector related structures (cmdline mode,
force/status enums, display info), but I think that all makes perfect
sense.
Also had to move a few more core kms object stuff into drm_modeset.h.
And as a first cleanup remove the kerneldoc for the 2 connector IOCTL
- DRM core docs are aimed at drivers, no point documenting internal in
excruciating detail.
v2: And also pull in all the connector property code.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-14-git-send-email-daniel.vetter@ffwll.ch
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index f4d0418..e30ea0b 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -39,31 +39,16 @@
#include <drm/drm_modeset.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_modes.h>
+#include <drm/drm_connector.h>
struct drm_device;
struct drm_mode_set;
-struct drm_object_properties;
struct drm_file;
struct drm_clip_rect;
struct device_node;
struct fence;
struct edid;
-#define DRM_OBJECT_MAX_PROPERTY 24
-struct drm_object_properties {
- int count, atomic_count;
- /* NOTE: if we ever start dynamically destroying properties (ie.
- * not at drm_mode_config_cleanup() time), then we'd have to do
- * a better job of detaching property from mode objects to avoid
- * dangling property pointers:
- */
- struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY];
- /* do not read/write values directly, but use drm_object_property_get_value()
- * and drm_object_property_set_value():
- */
- uint64_t values[DRM_OBJECT_MAX_PROPERTY];
-};
-
static inline int64_t U642I64(uint64_t val)
{
return (int64_t)*((int64_t *)&val);
@@ -88,61 +73,6 @@
#define DRM_REFLECT_Y BIT(5)
#define DRM_REFLECT_MASK (DRM_REFLECT_X | DRM_REFLECT_Y)
-enum drm_connector_status {
- connector_status_connected = 1,
- connector_status_disconnected = 2,
- connector_status_unknown = 3,
-};
-
-enum subpixel_order {
- SubPixelUnknown = 0,
- SubPixelHorizontalRGB,
- SubPixelHorizontalBGR,
- SubPixelVerticalRGB,
- SubPixelVerticalBGR,
- SubPixelNone,
-};
-
-#define DRM_COLOR_FORMAT_RGB444 (1<<0)
-#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
-#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
-
-#define DRM_BUS_FLAG_DE_LOW (1<<0)
-#define DRM_BUS_FLAG_DE_HIGH (1<<1)
-/* drive data on pos. edge */
-#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
-/* drive data on neg. edge */
-#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
-
-/*
- * Describes a given display (e.g. CRT or flat panel) and its limitations.
- */
-struct drm_display_info {
- char name[DRM_DISPLAY_INFO_LEN];
-
- /* Physical size */
- unsigned int width_mm;
- unsigned int height_mm;
-
- /* Clock limits FIXME: storage format */
- unsigned int min_vfreq, max_vfreq;
- unsigned int min_hfreq, max_hfreq;
- unsigned int pixel_clock;
- unsigned int bpc;
-
- enum subpixel_order subpixel_order;
- u32 color_formats;
-
- const u32 *bus_formats;
- unsigned int num_bus_formats;
- u32 bus_flags;
-
- /* Mask of supported hdmi deep color modes */
- u8 edid_hdmi_dc_modes;
-
- u8 cea_rev;
-};
-
/* data corresponds to displayid vend/prod/serial */
struct drm_tile_group {
struct kref refcount;
@@ -179,7 +109,6 @@
};
struct drm_crtc;
-struct drm_connector;
struct drm_encoder;
struct drm_pending_vblank_event;
struct drm_plane;
@@ -188,7 +117,6 @@
struct drm_crtc_helper_funcs;
struct drm_encoder_helper_funcs;
-struct drm_connector_helper_funcs;
struct drm_plane_helper_funcs;
/**
@@ -734,291 +662,6 @@
};
/**
- * struct drm_connector_state - mutable connector state
- * @connector: backpointer to the connector
- * @crtc: CRTC to connect connector to, NULL if disabled
- * @best_encoder: can be used by helpers and drivers to select the encoder
- * @state: backpointer to global drm_atomic_state
- */
-struct drm_connector_state {
- struct drm_connector *connector;
-
- struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */
-
- struct drm_encoder *best_encoder;
-
- struct drm_atomic_state *state;
-};
-
-/**
- * struct drm_connector_funcs - control connectors on a given device
- *
- * Each CRTC may have one or more connectors attached to it. The functions
- * below allow the core DRM code to control connectors, enumerate available modes,
- * etc.
- */
-struct drm_connector_funcs {
- /**
- * @dpms:
- *
- * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
- * is exposed as a standard property on the connector, but diverted to
- * this callback in the drm core. Note that atomic drivers don't
- * implement the 4 level DPMS support on the connector any more, but
- * instead only have an on/off "ACTIVE" property on the CRTC object.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_connector_dpms() to implement this hook.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*dpms)(struct drm_connector *connector, int mode);
-
- /**
- * @reset:
- *
- * Reset connector hardware and software state to off. This function isn't
- * called by the core directly, only through drm_mode_config_reset().
- * It's not a helper hook only for historical reasons.
- *
- * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
- * atomic state using this hook.
- */
- void (*reset)(struct drm_connector *connector);
-
- /**
- * @detect:
- *
- * Check to see if anything is attached to the connector. The parameter
- * force is set to false whilst polling, true when checking the
- * connector due to a user request. force can be used by the driver to
- * avoid expensive, destructive operations during automated probing.
- *
- * FIXME:
- *
- * Note that this hook is only called by the probe helper. It's not in
- * the helper library vtable purely for historical reasons. The only DRM
- * core entry point to probe connector state is @fill_modes.
- *
- * RETURNS:
- *
- * drm_connector_status indicating the connector's status.
- */
- enum drm_connector_status (*detect)(struct drm_connector *connector,
- bool force);
-
- /**
- * @force:
- *
- * This function is called to update internal encoder state when the
- * connector is forced to a certain state by userspace, either through
- * the sysfs interfaces or on the kernel cmdline. In that case the
- * @detect callback isn't called.
- *
- * FIXME:
- *
- * Note that this hook is only called by the probe helper. It's not in
- * the helper library vtable purely for historical reasons. The only DRM
- * core entry point to probe connector state is @fill_modes.
- */
- void (*force)(struct drm_connector *connector);
-
- /**
- * @fill_modes:
- *
- * Entry point for output detection and basic mode validation. The
- * driver should reprobe the output if needed (e.g. when hotplug
- * handling is unreliable), add all detected modes to connector->modes
- * and filter out any the device can't support in any configuration. It
- * also needs to filter out any modes wider or higher than the
- * parameters max_width and max_height indicate.
- *
- * The drivers must also prune any modes no longer valid from
- * connector->modes. Furthermore it must update connector->status and
- * connector->edid. If no EDID has been received for this output
- * connector->edid must be NULL.
- *
- * Drivers using the probe helpers should use
- * drm_helper_probe_single_connector_modes() or
- * drm_helper_probe_single_connector_modes_nomerge() to implement this
- * function.
- *
- * RETURNS:
- *
- * The number of modes detected and filled into connector->modes.
- */
- int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
-
- /**
- * @set_property:
- *
- * This is the legacy entry point to update a property attached to the
- * connector.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_connector_set_property() to implement this hook.
- *
- * This callback is optional if the driver does not support any legacy
- * driver-private properties.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*set_property)(struct drm_connector *connector, struct drm_property *property,
- uint64_t val);
-
- /**
- * @late_register:
- *
- * This optional hook can be used to register additional userspace
- * interfaces attached to the connector, light backlight control, i2c,
- * DP aux or similar interfaces. It is called late in the driver load
- * sequence from drm_connector_register() when registering all the
- * core drm connector interfaces. Everything added from this callback
- * should be unregistered in the early_unregister callback.
- *
- * Returns:
- *
- * 0 on success, or a negative error code on failure.
- */
- int (*late_register)(struct drm_connector *connector);
-
- /**
- * @early_unregister:
- *
- * This optional hook should be used to unregister the additional
- * userspace interfaces attached to the connector from
- * late_unregister(). It is called from drm_connector_unregister(),
- * early in the driver unload sequence to disable userspace access
- * before data structures are torndown.
- */
- void (*early_unregister)(struct drm_connector *connector);
-
- /**
- * @destroy:
- *
- * Clean up connector resources. This is called at driver unload time
- * through drm_mode_config_cleanup(). It can also be called at runtime
- * when a connector is being hot-unplugged for drivers that support
- * connector hotplugging (e.g. DisplayPort MST).
- */
- void (*destroy)(struct drm_connector *connector);
-
- /**
- * @atomic_duplicate_state:
- *
- * Duplicate the current atomic state for this connector and return it.
- * The core and helpers gurantee that any atomic state duplicated with
- * this hook and still owned by the caller (i.e. not transferred to the
- * driver by calling ->atomic_commit() from struct
- * &drm_mode_config_funcs) will be cleaned up by calling the
- * @atomic_destroy_state hook in this structure.
- *
- * Atomic drivers which don't subclass struct &drm_connector_state should use
- * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
- * state structure to extend it with driver-private state should use
- * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
- * duplicated in a consistent fashion across drivers.
- *
- * It is an error to call this hook before connector->state has been
- * initialized correctly.
- *
- * NOTE:
- *
- * If the duplicate state references refcounted resources this hook must
- * acquire a reference for each of them. The driver must release these
- * references again in @atomic_destroy_state.
- *
- * RETURNS:
- *
- * Duplicated atomic state or NULL when the allocation failed.
- */
- struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
-
- /**
- * @atomic_destroy_state:
- *
- * Destroy a state duplicated with @atomic_duplicate_state and release
- * or unreference all resources it references
- */
- void (*atomic_destroy_state)(struct drm_connector *connector,
- struct drm_connector_state *state);
-
- /**
- * @atomic_set_property:
- *
- * Decode a driver-private property value and store the decoded value
- * into the passed-in state structure. Since the atomic core decodes all
- * standardized properties (even for extensions beyond the core set of
- * properties which might not be implemented by all drivers) this
- * requires drivers to subclass the state structure.
- *
- * Such driver-private properties should really only be implemented for
- * truly hardware/vendor specific state. Instead it is preferred to
- * standardize atomic extension and decode the properties used to expose
- * such an extension in the core.
- *
- * Do not call this function directly, use
- * drm_atomic_connector_set_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * NOTE:
- *
- * This function is called in the state assembly phase of atomic
- * modesets, which can be aborted for any reason (including on
- * userspace's request to just check whether a configuration would be
- * possible). Drivers MUST NOT touch any persistent state (hardware or
- * software) or data structures except the passed in @state parameter.
- *
- * Also since userspace controls in which order properties are set this
- * function must not do any input validation (since the state update is
- * incomplete and hence likely inconsistent). Instead any such input
- * validation must be done in the various atomic_check callbacks.
- *
- * RETURNS:
- *
- * 0 if the property has been found, -EINVAL if the property isn't
- * implemented by the driver (which shouldn't ever happen, the core only
- * asks for properties attached to this connector). No other validation
- * is allowed by the driver. The core already checks that the property
- * value is within the range (integer, valid enum value, ...) the driver
- * set when registering the property.
- */
- int (*atomic_set_property)(struct drm_connector *connector,
- struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t val);
-
- /**
- * @atomic_get_property:
- *
- * Reads out the decoded driver-private property. This is used to
- * implement the GETCONNECTOR IOCTL.
- *
- * Do not call this function directly, use
- * drm_atomic_connector_get_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * RETURNS:
- *
- * 0 on success, -EINVAL if the property isn't implemented by the
- * driver (which shouldn't ever happen, the core only asks for
- * properties attached to this connector).
- */
- int (*atomic_get_property)(struct drm_connector *connector,
- const struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t *val);
-};
-
-/**
* struct drm_encoder_funcs - encoder controls
*
* Encoders sit between CRTCs and connectors.
@@ -1069,8 +712,6 @@
void (*early_unregister)(struct drm_encoder *encoder);
};
-#define DRM_CONNECTOR_MAX_ENCODER 3
-
/**
* struct drm_encoder - central DRM encoder structure
* @dev: parent DRM device
@@ -1111,171 +752,6 @@
const struct drm_encoder_helper_funcs *helper_private;
};
-/* should we poll this connector for connects and disconnects */
-/* hot plug detectable */
-#define DRM_CONNECTOR_POLL_HPD (1 << 0)
-/* poll for connections */
-#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
-/* can cleanly poll for disconnections without flickering the screen */
-/* DACs should rarely do this without a lot of testing */
-#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
-
-#define MAX_ELD_BYTES 128
-
-/**
- * struct drm_connector - central DRM connector control structure
- * @dev: parent DRM device
- * @kdev: kernel device for sysfs attributes
- * @attr: sysfs attributes
- * @head: list management
- * @base: base KMS object
- * @name: human readable name, can be overwritten by the driver
- * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
- * @connector_type_id: index into connector type enum
- * @interlace_allowed: can this connector handle interlaced modes?
- * @doublescan_allowed: can this connector handle doublescan?
- * @stereo_allowed: can this connector handle stereo modes?
- * @registered: is this connector exposed (registered) with userspace?
- * @modes: modes available on this connector (from fill_modes() + user)
- * @status: one of the drm_connector_status enums (connected, not, or unknown)
- * @probed_modes: list of modes derived directly from the display
- * @display_info: information about attached display (e.g. from EDID)
- * @funcs: connector control functions
- * @edid_blob_ptr: DRM property containing EDID if present
- * @properties: property tracking for this connector
- * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling
- * @dpms: current dpms state
- * @helper_private: mid-layer private data
- * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
- * @force: a DRM_FORCE_<foo> state for forced mode sets
- * @override_edid: has the EDID been overwritten through debugfs for testing?
- * @encoder_ids: valid encoders for this connector
- * @encoder: encoder driving this connector, if any
- * @eld: EDID-like data, if present
- * @dvi_dual: dual link DVI, if found
- * @max_tmds_clock: max clock rate, if found
- * @latency_present: AV delay info from ELD, if found
- * @video_latency: video latency info from ELD, if found
- * @audio_latency: audio latency info from ELD, if found
- * @null_edid_counter: track sinks that give us all zeros for the EDID
- * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
- * @edid_corrupt: indicates whether the last read EDID was corrupt
- * @debugfs_entry: debugfs directory for this connector
- * @state: current atomic state for this connector
- * @has_tile: is this connector connected to a tiled monitor
- * @tile_group: tile group for the connected monitor
- * @tile_is_single_monitor: whether the tile is one monitor housing
- * @num_h_tile: number of horizontal tiles in the tile group
- * @num_v_tile: number of vertical tiles in the tile group
- * @tile_h_loc: horizontal location of this tile
- * @tile_v_loc: vertical location of this tile
- * @tile_h_size: horizontal size of this tile.
- * @tile_v_size: vertical size of this tile.
- *
- * Each connector may be connected to one or more CRTCs, or may be clonable by
- * another connector if they can share a CRTC. Each connector also has a specific
- * position in the broader display (referred to as a 'screen' though it could
- * span multiple monitors).
- */
-struct drm_connector {
- struct drm_device *dev;
- struct device *kdev;
- struct device_attribute *attr;
- struct list_head head;
-
- struct drm_mode_object base;
-
- char *name;
-
- /**
- * @index: Compacted connector index, which matches the position inside
- * the mode_config.list for drivers not supporting hot-add/removing. Can
- * be used as an array index. It is invariant over the lifetime of the
- * connector.
- */
- unsigned index;
-
- int connector_type;
- int connector_type_id;
- bool interlace_allowed;
- bool doublescan_allowed;
- bool stereo_allowed;
- bool registered;
- struct list_head modes; /* list of modes on this connector */
-
- enum drm_connector_status status;
-
- /* these are modes added by probing with DDC or the BIOS */
- struct list_head probed_modes;
-
- struct drm_display_info display_info;
- const struct drm_connector_funcs *funcs;
-
- struct drm_property_blob *edid_blob_ptr;
- struct drm_object_properties properties;
-
- /**
- * @path_blob_ptr:
- *
- * DRM blob property data for the DP MST path property.
- */
- struct drm_property_blob *path_blob_ptr;
-
- /**
- * @tile_blob_ptr:
- *
- * DRM blob property data for the tile property (used mostly by DP MST).
- * This is meant for screens which are driven through separate display
- * pipelines represented by &drm_crtc, which might not be running with
- * genlocked clocks. For tiled panels which are genlocked, like
- * dual-link LVDS or dual-link DSI, the driver should try to not expose
- * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
- */
- struct drm_property_blob *tile_blob_ptr;
-
- uint8_t polled; /* DRM_CONNECTOR_POLL_* */
-
- /* requested DPMS state */
- int dpms;
-
- const struct drm_connector_helper_funcs *helper_private;
-
- /* forced on connector */
- struct drm_cmdline_mode cmdline_mode;
- enum drm_connector_force force;
- bool override_edid;
- uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
- struct drm_encoder *encoder; /* currently active encoder */
-
- /* EDID bits */
- uint8_t eld[MAX_ELD_BYTES];
- bool dvi_dual;
- int max_tmds_clock; /* in MHz */
- bool latency_present[2];
- int video_latency[2]; /* [0]: progressive, [1]: interlaced */
- int audio_latency[2];
- int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
- unsigned bad_edid_counter;
-
- /* Flag for raw EDID header corruption - used in Displayport
- * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
- */
- bool edid_corrupt;
-
- struct dentry *debugfs_entry;
-
- struct drm_connector_state *state;
-
- /* DisplayID bits */
- bool has_tile;
- struct drm_tile_group *tile_group;
- bool tile_is_single_monitor;
-
- uint8_t num_h_tile, num_v_tile;
- uint8_t tile_h_loc, tile_v_loc;
- uint16_t tile_h_size, tile_v_size;
-};
-
/**
* struct drm_plane_state - mutable plane state
* @plane: backpointer to the plane
@@ -2615,7 +2091,6 @@
for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder)))
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
-#define obj_to_connector(x) container_of(x, struct drm_connector, base)
#define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base)
@@ -2661,19 +2136,6 @@
return 1 << drm_crtc_index(crtc);
}
-int drm_connector_init(struct drm_device *dev,
- struct drm_connector *connector,
- const struct drm_connector_funcs *funcs,
- int connector_type);
-int drm_connector_register(struct drm_connector *connector);
-void drm_connector_unregister(struct drm_connector *connector);
-
-extern void drm_connector_cleanup(struct drm_connector *connector);
-static inline unsigned drm_connector_index(struct drm_connector *connector)
-{
- return connector->index;
-}
-
extern __printf(5, 6)
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
@@ -2742,23 +2204,10 @@
extern void drm_encoder_cleanup(struct drm_encoder *encoder);
-extern const char *drm_get_connector_status_name(enum drm_connector_status status);
-extern const char *drm_get_subpixel_order_name(enum subpixel_order order);
-extern const char *drm_get_dpms_name(int val);
-extern const char *drm_get_dvi_i_subconnector_name(int val);
-extern const char *drm_get_dvi_i_select_name(int val);
-extern const char *drm_get_tv_subconnector_name(int val);
-extern const char *drm_get_tv_select_name(int val);
extern void drm_mode_config_init(struct drm_device *dev);
extern void drm_mode_config_reset(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
-extern int drm_mode_connector_set_path_property(struct drm_connector *connector,
- const char *path);
-int drm_mode_connector_set_tile_property(struct drm_connector *connector);
-extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
- const struct edid *edid);
-
extern int drm_display_info_set_bus_formats(struct drm_display_info *info,
const u32 *formats,
unsigned int num_formats);
@@ -2819,16 +2268,6 @@
extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
extern int drm_property_add_enum(struct drm_property *property, int index,
uint64_t value, const char *name);
-extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
-extern int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[]);
-extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
-extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
-extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
-
-extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
- struct drm_encoder *encoder);
extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
int gamma_size);
@@ -2888,22 +2327,6 @@
return mo ? obj_to_encoder(mo) : NULL;
}
-/**
- * drm_connector_lookup - lookup connector object
- * @dev: DRM device
- * @id: connector object id
- *
- * This function looks up the connector object specified by id
- * add takes a reference to it.
- */
-static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
- uint32_t id)
-{
- struct drm_mode_object *mo;
- mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR);
- return mo ? obj_to_connector(mo) : NULL;
-}
-
static inline struct drm_property *drm_property_find(struct drm_device *dev,
uint32_t id)
{
@@ -2931,28 +2354,6 @@
return clamp_val(val, 0, max);
}
-/**
- * drm_connector_reference - incr the connector refcnt
- * @connector: connector
- *
- * This function increments the connector's refcount.
- */
-static inline void drm_connector_reference(struct drm_connector *connector)
-{
- drm_mode_object_reference(&connector->base);
-}
-
-/**
- * drm_connector_unreference - unref a connector
- * @connector: connector to unref
- *
- * This function decrements the connector's refcount and frees it if it drops to zero.
- */
-static inline void drm_connector_unreference(struct drm_connector *connector)
-{
- drm_mode_object_unreference(&connector->base);
-}
-
/* Plane list iterator for legacy (overlay only) planes. */
#define drm_for_each_legacy_plane(plane, dev) \
list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \