ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown
Make sure RTC-interrupts are disabled at shutdown.
As the RTC is generally powered by backup power (VDDBU), its interrupts
are not disabled on wake-up, user, watchdog or software reset. This
could cause troubles on other systems (e.g. older kernels) if an
interrupt occurs before a handler has been installed at next boot.
Let us be well-behaved and disable them on clean shutdowns at least (as
do the RTT-based rtc-at91sam9 driver).
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 8b2cd8a..c0da95e 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -428,6 +428,14 @@
return 0;
}
+static void at91_rtc_shutdown(struct platform_device *pdev)
+{
+ /* Disable all interrupts */
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+ AT91_RTC_SECEV | AT91_RTC_TIMEV |
+ AT91_RTC_CALEV);
+}
+
#ifdef CONFIG_PM_SLEEP
/* AT91RM9200 RTC Power management control */
@@ -466,6 +474,7 @@
static struct platform_driver at91_rtc_driver = {
.remove = __exit_p(at91_rtc_remove),
+ .shutdown = at91_rtc_shutdown,
.driver = {
.name = "at91_rtc",
.owner = THIS_MODULE,