[SCSI] be2iscsi: Fix WRB_Q posting to support Dual Chute mode
Configuration parameters return number of CID each chute supports. The WRB_Q
is created for the passed CID count. If both the Chute has iSCSI Protocol then
WRB_Q creation is in a round robin mechanism.
For BE-X family iSCSI protocol is loaded only on single chute.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index b77a327..cc37a4e 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -17,9 +17,9 @@
#include <scsi/iscsi_proto.h>
+#include "be_main.h"
#include "be.h"
#include "be_mgmt.h"
-#include "be_main.h"
int beiscsi_pci_soft_reset(struct beiscsi_hba *phba)
{
@@ -1135,12 +1135,27 @@
return status;
}
-int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
- struct be_queue_info *wrbq)
+/**
+ * be_cmd_wrbq_create()- Create WRBQ
+ * @ctrl: ptr to ctrl_info
+ * @q_mem: memory details for the queue
+ * @wrbq: queue info
+ * @pwrb_context: ptr to wrb_context
+ * @ulp_num: ULP on which the WRBQ is to be created
+ *
+ * Create WRBQ on the passed ULP_NUM.
+ *
+ **/
+int be_cmd_wrbq_create(struct be_ctrl_info *ctrl,
+ struct be_dma_mem *q_mem,
+ struct be_queue_info *wrbq,
+ struct hwi_wrb_context *pwrb_context,
+ uint8_t ulp_num)
{
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
struct be_wrbq_create_req *req = embedded_payload(wrb);
struct be_wrbq_create_resp *resp = embedded_payload(wrb);
+ struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
int status;
spin_lock(&ctrl->mbox_lock);
@@ -1151,12 +1166,28 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
OPCODE_COMMON_ISCSI_WRBQ_CREATE, sizeof(*req));
req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+
+ if (phba->fw_config.dual_ulp_aware) {
+ req->ulp_num = ulp_num;
+ req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT);
+ req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT);
+ }
+
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
status = be_mbox_notify(ctrl);
if (!status) {
wrbq->id = le16_to_cpu(resp->cid);
wrbq->created = true;
+
+ pwrb_context->cid = wrbq->id;
+ if (!phba->fw_config.dual_ulp_aware) {
+ pwrb_context->doorbell_offset = DB_TXULP0_OFFSET;
+ pwrb_context->ulp_num = BEISCSI_ULP0;
+ } else {
+ pwrb_context->ulp_num = resp->ulp_num;
+ pwrb_context->doorbell_offset = resp->doorbell_offset;
+ }
}
spin_unlock(&ctrl->mbox_lock);
return status;
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 40bc285..627ebbe 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -744,7 +744,9 @@
int beiscsi_cmd_reset_function(struct beiscsi_hba *phba);
int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
- struct be_queue_info *wrbq);
+ struct be_queue_info *wrbq,
+ struct hwi_wrb_context *pwrb_context,
+ uint8_t ulp_num);
bool is_link_state_evt(u32 trailer);
@@ -836,14 +838,18 @@
struct be_cmd_req_hdr hdr;
u16 num_pages;
u8 ulp_num;
- u8 rsvd0;
+ u8 dua_feature;
struct phys_addr pages[8];
} __packed;
struct be_wrbq_create_resp {
struct be_cmd_resp_hdr resp_hdr;
u16 cid;
- u16 rsvd0;
+ u8 rsvd0;
+ u8 ulp_num;
+ u32 doorbell_offset;
+ u16 register_set;
+ u16 doorbell_format;
} __packed;
#define SOL_CID_MASK 0x0000FFC0
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 59d7e932..8595908 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -3507,13 +3507,15 @@
{
unsigned int wrb_mem_index, offset, size, num_wrb_rings;
u64 pa_addr_lo;
- unsigned int idx, num, i;
+ unsigned int idx, num, i, ulp_num;
struct mem_array *pwrb_arr;
void *wrb_vaddr;
struct be_dma_mem sgl;
struct be_mem_descriptor *mem_descr;
struct hwi_wrb_context *pwrb_context;
int status;
+ uint8_t ulp_count = 0, ulp_base_num = 0;
+ uint16_t cid_count_ulp[BEISCSI_ULP_COUNT] = { 0 };
idx = 0;
mem_descr = phba->init_mem;
@@ -3557,14 +3559,37 @@
num_wrb_rings--;
}
}
+
+ /* Get the ULP Count */
+ for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
+ if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) {
+ ulp_count++;
+ ulp_base_num = ulp_num;
+ cid_count_ulp[ulp_num] =
+ BEISCSI_GET_CID_COUNT(phba, ulp_num);
+ }
+
for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
wrb_mem_index = 0;
offset = 0;
size = 0;
+ if (ulp_count > 1) {
+ ulp_base_num = (ulp_base_num + 1) % BEISCSI_ULP_COUNT;
+
+ if (!cid_count_ulp[ulp_base_num])
+ ulp_base_num = (ulp_base_num + 1) %
+ BEISCSI_ULP_COUNT;
+
+ cid_count_ulp[ulp_base_num]--;
+ }
+
+
hwi_build_be_sgl_by_offset(phba, &pwrb_arr[i], &sgl);
status = be_cmd_wrbq_create(&phba->ctrl, &sgl,
- &phwi_context->be_wrbq[i]);
+ &phwi_context->be_wrbq[i],
+ &phwi_ctrlr->wrb_context[i],
+ ulp_base_num);
if (status != 0) {
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
"BM_%d : wrbq create failed.");
@@ -3572,7 +3597,6 @@
return status;
}
pwrb_context = &phwi_ctrlr->wrb_context[i];
- pwrb_context->cid = phwi_context->be_wrbq[i].id;
BE_SET_CID_TO_CRI(i, pwrb_context->cid);
}
kfree(pwrb_arr);
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index bb96ba4..410efc7 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -34,7 +34,6 @@
#include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h>
-#include "be.h"
#define DRV_NAME "be2iscsi"
#define BUILD_STR "10.0.467.0"
#define BE_NAME "Emulex OneConnect" \
@@ -280,6 +279,25 @@
unsigned short cid;
} __packed;
+#define BEISCSI_GET_ULP_FROM_CRI(phwi_ctrlr, cri) \
+ (phwi_ctrlr->wrb_context[cri].ulp_num)
+struct hwi_wrb_context {
+ struct list_head wrb_handle_list;
+ struct list_head wrb_handle_drvr_list;
+ struct wrb_handle **pwrb_handle_base;
+ struct wrb_handle **pwrb_handle_basestd;
+ struct iscsi_wrb *plast_wrb;
+ unsigned short alloc_index;
+ unsigned short free_index;
+ unsigned short wrb_handles_available;
+ unsigned short cid;
+ uint8_t ulp_num; /* ULP to which CID binded */
+ uint16_t register_set;
+ uint16_t doorbell_format;
+ uint32_t doorbell_offset;
+};
+
+#include "be.h"
#define chip_be2(phba) (phba->generation == BE_GEN2)
#define chip_be3_r(phba) (phba->generation == BE_GEN3)
#define is_chip_be2_be3r(phba) (chip_be3_r(phba) || (chip_be2(phba)))
@@ -955,21 +973,6 @@
*/
};
-#define BEISCSI_GET_ULP_FROM_CRI(phwi_ctrlr, cri) \
- (phwi_ctrlr->wrb_context[cri].ulp_num)
-struct hwi_wrb_context {
- struct list_head wrb_handle_list;
- struct list_head wrb_handle_drvr_list;
- struct wrb_handle **pwrb_handle_base;
- struct wrb_handle **pwrb_handle_basestd;
- struct iscsi_wrb *plast_wrb;
- unsigned short alloc_index;
- unsigned short free_index;
- unsigned short wrb_handles_available;
- unsigned short cid;
- uint8_t ulp_num; /* ULP to which CID binded */
-};
-
struct hwi_controller {
struct list_head io_sgl_list;
struct list_head eh_sgl_list;