libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 170bad1..80126f8 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -333,7 +333,6 @@
.thaw = vsc_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = vsc_sata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -367,30 +366,50 @@
static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ static const struct ata_port_info pi = {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f,
+ .port_ops = &vsc_sata_ops,
+ };
+ const struct ata_port_info *ppi[] = { &pi, NULL };
static int printed_version;
- struct ata_probe_ent *probe_ent;
+ struct ata_host *host;
void __iomem *mmio_base;
- int rc;
+ int i, rc;
u8 cls;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* allocate host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
+ if (!host)
+ return -ENOMEM;
+
rc = pcim_enable_device(pdev);
if (rc)
return rc;
- /*
- * Check if we have needed resource mapped.
- */
+ /* check if we have needed resource mapped */
if (pci_resource_len(pdev, 0) == 0)
return -ENODEV;
+ /* map IO regions and intialize host accordingly */
rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
if (rc)
return rc;
+ host->iomap = pcim_iomap_table(pdev);
+
+ mmio_base = host->iomap[VSC_MMIO_BAR];
+
+ for (i = 0; i < host->n_ports; i++)
+ vsc_sata_setup_port(&host->ports[i]->ioaddr,
+ mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
@@ -402,12 +421,6 @@
if (rc)
return rc;
- probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL)
- return -ENOMEM;
- probe_ent->dev = pci_dev_to_dev(pdev);
- INIT_LIST_HEAD(&probe_ent->node);
-
/*
* Due to a bug in the chip, the default cache line size can't be
* used (unless the default is non-zero).
@@ -418,33 +431,6 @@
if (pci_enable_msi(pdev) == 0)
pci_intx(pdev, 0);
- else
- probe_ent->irq_flags = IRQF_SHARED;
-
- probe_ent->sht = &vsc_sata_sht;
- probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO;
- probe_ent->port_ops = &vsc_sata_ops;
- probe_ent->n_ports = 4;
- probe_ent->irq = pdev->irq;
- probe_ent->iomap = pcim_iomap_table(pdev);
-
- /* We don't care much about the PIO/UDMA masks, but the core won't like us
- * if we don't fill these
- */
- probe_ent->pio_mask = 0x1f;
- probe_ent->mwdma_mask = 0x07;
- probe_ent->udma_mask = 0x7f;
-
- mmio_base = probe_ent->iomap[VSC_MMIO_BAR];
-
- /* We have 4 ports per PCI function */
- vsc_sata_setup_port(&probe_ent->port[0], mmio_base + 1 * VSC_SATA_PORT_OFFSET);
- vsc_sata_setup_port(&probe_ent->port[1], mmio_base + 2 * VSC_SATA_PORT_OFFSET);
- vsc_sata_setup_port(&probe_ent->port[2], mmio_base + 3 * VSC_SATA_PORT_OFFSET);
- vsc_sata_setup_port(&probe_ent->port[3], mmio_base + 4 * VSC_SATA_PORT_OFFSET);
-
- pci_set_master(pdev);
/*
* Config offset 0x98 is "Extended Control and Status Register 0"
@@ -454,11 +440,9 @@
*/
pci_write_config_dword(pdev, 0x98, 0);
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
+ IRQF_SHARED, &vsc_sata_sht);
}
static const struct pci_device_id vsc_sata_pci_tbl[] = {