libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 8786b45..f5a05de 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -114,7 +114,6 @@
static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t qs_intr (int irq, void *dev_instance);
static int qs_port_start(struct ata_port *ap);
static void qs_host_stop(struct ata_host *host);
static void qs_phy_reset(struct ata_port *ap);
@@ -158,7 +157,6 @@
.qc_issue = qs_qc_issue,
.data_xfer = ata_data_xfer,
.eng_timeout = qs_eng_timeout,
- .irq_handler = qs_intr,
.irq_clear = qs_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -173,7 +171,6 @@
static const struct ata_port_info qs_port_info[] = {
/* board_2068_idx */
{
- .sht = &qs_ata_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET |
//FIXME ATA_FLAG_SRST |
@@ -530,16 +527,16 @@
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
}
-static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+static void qs_host_init(struct ata_host *host, unsigned int chip_id)
{
- void __iomem *mmio_base = pe->iomap[QS_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[QS_MMIO_BAR];
unsigned int port_no;
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
/* reset each channel in turn */
- for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+ for (port_no = 0; port_no < host->n_ports; ++port_no) {
u8 __iomem *chan = mmio_base + (port_no * 0x4000);
writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
@@ -547,7 +544,7 @@
}
writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
- for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+ for (port_no = 0; port_no < host->n_ports; ++port_no) {
u8 __iomem *chan = mmio_base + (port_no * 0x4000);
/* set FIFO depths to same settings as Windows driver */
writew(32, chan + QS_CFC_HUFT);
@@ -607,14 +604,20 @@
const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_probe_ent *probe_ent;
- void __iomem * const *iomap;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ const struct ata_port_info *ppi[] = { &qs_port_info[board_idx], NULL };
+ struct ata_host *host;
int rc, port_no;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* alloc host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, QS_PORTS);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
@@ -625,47 +628,24 @@
rc = pcim_iomap_regions(pdev, 1 << QS_MMIO_BAR, DRV_NAME);
if (rc)
return rc;
- iomap = pcim_iomap_table(pdev);
+ host->iomap = pcim_iomap_table(pdev);
- rc = qs_set_dma_masks(pdev, iomap[QS_MMIO_BAR]);
+ rc = qs_set_dma_masks(pdev, host->iomap[QS_MMIO_BAR]);
if (rc)
return rc;
- probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL)
- return -ENOMEM;
-
- probe_ent->dev = pci_dev_to_dev(pdev);
- INIT_LIST_HEAD(&probe_ent->node);
-
- probe_ent->sht = qs_port_info[board_idx].sht;
- probe_ent->port_flags = qs_port_info[board_idx].flags;
- probe_ent->pio_mask = qs_port_info[board_idx].pio_mask;
- probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask;
- probe_ent->udma_mask = qs_port_info[board_idx].udma_mask;
- probe_ent->port_ops = qs_port_info[board_idx].port_ops;
-
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->iomap = iomap;
- probe_ent->n_ports = QS_PORTS;
-
- for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+ for (port_no = 0; port_no < host->n_ports; ++port_no) {
void __iomem *chan =
- probe_ent->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
- qs_ata_setup_port(&probe_ent->port[port_no], chan);
+ host->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
+ qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan);
}
- pci_set_master(pdev);
-
/* initialize adapter */
- qs_host_init(board_idx, probe_ent);
+ qs_host_init(host, board_idx);
- if (ata_device_add(probe_ent) != QS_PORTS)
- return -EIO;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, qs_intr, IRQF_SHARED,
+ &qs_ata_sht);
}
static int __init qs_ata_init(void)