[SCSI] libfc: use ADISC to verify rport login state
When rport_login is called on an rport that is already thought
to be logged in, use ADISC. If that fails, redo PLOGI.
This is less disruptive after fabric changes that don't affect
the state of the target.
Implement the sending of ADISC via fc_els_fill.
Add ADISC state to the rport state machine. This is entered from READY
and returns to READY after successful completion. If it fails, the rport
is either logged off and deleted or re-does PLOGI.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index b5bc872..c33e258 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -62,6 +62,7 @@
static void fc_rport_enter_rtv(struct fc_rport_priv *);
static void fc_rport_enter_ready(struct fc_rport_priv *);
static void fc_rport_enter_logo(struct fc_rport_priv *);
+static void fc_rport_enter_adisc(struct fc_rport_priv *);
static void fc_rport_recv_plogi_req(struct fc_lport *,
struct fc_seq *, struct fc_frame *);
@@ -83,6 +84,7 @@
[RPORT_ST_RTV] = "RTV",
[RPORT_ST_READY] = "Ready",
[RPORT_ST_LOGO] = "LOGO",
+ [RPORT_ST_ADISC] = "ADISC",
[RPORT_ST_DELETE] = "Delete",
};
@@ -326,15 +328,25 @@
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
* function and then unlock the rport.
+ *
+ * This indicates the intent to be logged into the remote port.
+ * If it appears we are already logged in, ADISC is used to verify
+ * the setup.
*/
int fc_rport_login(struct fc_rport_priv *rdata)
{
mutex_lock(&rdata->rp_mutex);
- FC_RPORT_DBG(rdata, "Login to port\n");
-
- fc_rport_enter_plogi(rdata);
-
+ switch (rdata->rp_state) {
+ case RPORT_ST_READY:
+ FC_RPORT_DBG(rdata, "ADISC port\n");
+ fc_rport_enter_adisc(rdata);
+ break;
+ default:
+ FC_RPORT_DBG(rdata, "Login to port\n");
+ fc_rport_enter_plogi(rdata);
+ break;
+ }
mutex_unlock(&rdata->rp_mutex);
return 0;
@@ -448,6 +460,9 @@
case RPORT_ST_LOGO:
fc_rport_enter_logo(rdata);
break;
+ case RPORT_ST_ADISC:
+ fc_rport_enter_adisc(rdata);
+ break;
case RPORT_ST_READY:
case RPORT_ST_INIT:
case RPORT_ST_DELETE:
@@ -473,13 +488,16 @@
switch (rdata->rp_state) {
case RPORT_ST_PLOGI:
- case RPORT_ST_PRLI:
case RPORT_ST_LOGO:
fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
break;
case RPORT_ST_RTV:
fc_rport_enter_ready(rdata);
break;
+ case RPORT_ST_PRLI:
+ case RPORT_ST_ADISC:
+ fc_rport_enter_logo(rdata);
+ break;
case RPORT_ST_DELETE:
case RPORT_ST_READY:
case RPORT_ST_INIT:
@@ -907,6 +925,93 @@
}
/**
+ * fc_rport_els_adisc_resp() - Address Discovery response handler
+ * @sp: current sequence in the ADISC exchange
+ * @fp: response frame
+ * @rdata_arg: remote port private.
+ *
+ * Locking Note: This function will be called without the rport lock
+ * held, but it will lock, call an _enter_* function or fc_rport_error
+ * and then unlock the rport.
+ */
+static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
+ void *rdata_arg)
+{
+ struct fc_rport_priv *rdata = rdata_arg;
+ struct fc_els_adisc *adisc;
+ u8 op;
+
+ mutex_lock(&rdata->rp_mutex);
+
+ FC_RPORT_DBG(rdata, "Received a ADISC response\n");
+
+ if (rdata->rp_state != RPORT_ST_ADISC) {
+ FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n",
+ fc_rport_state(rdata));
+ if (IS_ERR(fp))
+ goto err;
+ goto out;
+ }
+
+ if (IS_ERR(fp)) {
+ fc_rport_error(rdata, fp);
+ goto err;
+ }
+
+ /*
+ * If address verification failed. Consider us logged out of the rport.
+ * Since the rport is still in discovery, we want to be
+ * logged in, so go to PLOGI state. Otherwise, go back to READY.
+ */
+ op = fc_frame_payload_op(fp);
+ adisc = fc_frame_payload_get(fp, sizeof(*adisc));
+ if (op != ELS_LS_ACC || !adisc ||
+ ntoh24(adisc->adisc_port_id) != rdata->ids.port_id ||
+ get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name ||
+ get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) {
+ FC_RPORT_DBG(rdata, "ADISC error or mismatch\n");
+ fc_rport_enter_plogi(rdata);
+ } else {
+ FC_RPORT_DBG(rdata, "ADISC OK\n");
+ fc_rport_enter_ready(rdata);
+ }
+out:
+ fc_frame_free(fp);
+err:
+ mutex_unlock(&rdata->rp_mutex);
+ kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
+}
+
+/**
+ * fc_rport_enter_adisc() - Send Address Discover (ADISC) request to peer
+ * @rdata: remote port private data
+ *
+ * Locking Note: The rport lock is expected to be held before calling
+ * this routine.
+ */
+static void fc_rport_enter_adisc(struct fc_rport_priv *rdata)
+{
+ struct fc_lport *lport = rdata->local_port;
+ struct fc_frame *fp;
+
+ FC_RPORT_DBG(rdata, "sending ADISC from %s state\n",
+ fc_rport_state(rdata));
+
+ fc_rport_state_enter(rdata, RPORT_ST_ADISC);
+
+ fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc));
+ if (!fp) {
+ fc_rport_error_retry(rdata, fp);
+ return;
+ }
+ if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
+ fc_rport_adisc_resp, rdata, lport->e_d_tov))
+ fc_rport_error_retry(rdata, fp);
+ else
+ kref_get(&rdata->kref);
+}
+
+/**
* fc_rport_recv_els_req() - handle a validated ELS request.
* @lport: Fibre Channel local port
* @sp: current sequence in the PLOGI exchange
@@ -943,6 +1048,7 @@
case RPORT_ST_PRLI:
case RPORT_ST_RTV:
case RPORT_ST_READY:
+ case RPORT_ST_ADISC:
break;
default:
mutex_unlock(&rdata->rp_mutex);
@@ -1095,6 +1201,10 @@
break;
case RPORT_ST_PRLI:
case RPORT_ST_READY:
+ case RPORT_ST_ADISC:
+ FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
+ "- ignored for now\n", rdata->rp_state);
+ /* XXX TBD - should reset */
break;
case RPORT_ST_DELETE:
default:
@@ -1178,6 +1288,7 @@
case RPORT_ST_PRLI:
case RPORT_ST_RTV:
case RPORT_ST_READY:
+ case RPORT_ST_ADISC:
reason = ELS_RJT_NONE;
break;
default:
@@ -1283,6 +1394,7 @@
fc_rport_enter_ready(rdata);
break;
case RPORT_ST_READY:
+ case RPORT_ST_ADISC:
break;
default:
break;