[PATCH] libata: replace ap->hard_port_no with ap->port_no
Replace ap->hard_port_no with ap->port_no.
Signed-off-by: Tejun Heo <htejun@gmail.com>
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 40ecab57..501755a 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -487,7 +487,7 @@
goto cbl40;
/* check BIOS cable detect results */
- mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
+ mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
if ((tmp & mask) == 0)
goto cbl40;
@@ -513,7 +513,7 @@
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
return 0;
@@ -550,7 +550,7 @@
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct piix_host_priv *hpriv = ap->host_set->private_data;
const unsigned int *map = hpriv->map;
- int base = 2 * ap->hard_port_no;
+ int base = 2 * ap->port_no;
unsigned int present = 0;
int port, i;
u16 pcs;
@@ -601,7 +601,7 @@
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
unsigned int is_slave = (adev->devno != 0);
- unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40;
+ unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
u16 master_data;
u8 slave_data;
@@ -619,10 +619,10 @@
/* enable PPE, IE and TIME */
master_data |= 0x0070;
pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= (ap->hard_port_no ? 0x0f : 0xf0);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
slave_data |=
(timings[pio][0] << 2) |
- (timings[pio][1] << (ap->hard_port_no ? 4 : 0));
+ (timings[pio][1] << (ap->port_no ? 4 : 0));
} else {
master_data &= 0xccf8;
/* enable PPE, IE and TIME */
@@ -652,9 +652,9 @@
{
unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
- u8 maslave = ap->hard_port_no ? 0x42 : 0x40;
+ u8 maslave = ap->port_no ? 0x42 : 0x40;
u8 speed = udma;
- unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno;
+ unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno;
int a_speed = 3 << (drive_dn * 4);
int u_flag = 1 << drive_dn;
int v_flag = 0x01 << drive_dn;