rtc: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index bb32903..095282f 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -99,14 +99,14 @@
/* read date registers */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
dev_dbg(&client->dev,
"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
- __FUNCTION__,
+ __func__,
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
@@ -121,7 +121,7 @@
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
+ __func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
@@ -139,7 +139,7 @@
/* read status register */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -162,7 +162,7 @@
dev_dbg(&client->dev,
"%s: secs=%d, mins=%d, hours=%d\n",
- __FUNCTION__,
+ __func__,
tm->tm_sec, tm->tm_min, tm->tm_hour);
buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
@@ -175,7 +175,7 @@
if (datetoo) {
dev_dbg(&client->dev,
"%s: mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
+ __func__,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
@@ -191,12 +191,12 @@
/* this sequence is required to unlock the chip */
if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
+ dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
return -EIO;
}
if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
+ dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
return -EIO;
}
@@ -208,7 +208,7 @@
if (xfer != 3) {
dev_err(&client->dev,
"%s: xfer=%d addr=%02x, data=%02x\n",
- __FUNCTION__,
+ __func__,
xfer, rdata[1], rdata[2]);
return -EIO;
}
@@ -216,7 +216,7 @@
/* disable further writes */
if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+ dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
return -EIO;
}
@@ -249,11 +249,11 @@
/* read dtr register */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);
*trim = 0;
@@ -281,11 +281,11 @@
/* read atr register */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);
/* atr is a two's complement value on 6 bits,
* perform sign extension. The formula is
@@ -294,11 +294,11 @@
if (atr & 0x20)
atr |= 0xC0;
- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);
*trim = (atr * 250) + 11000;
- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
+ dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);
return 0;
}
@@ -352,7 +352,7 @@
if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
dev_err(&client->dev,
"%s: could not read register %x\n",
- __FUNCTION__, probe_zero_pattern[i]);
+ __func__, probe_zero_pattern[i]);
return -EIO;
}
@@ -360,7 +360,7 @@
if ((buf & probe_zero_pattern[i+1]) != 0) {
dev_err(&client->dev,
"%s: register=%02x, zero pattern=%d, value=%x\n",
- __FUNCTION__, probe_zero_pattern[i], i, buf);
+ __func__, probe_zero_pattern[i], i, buf);
return -ENODEV;
}
@@ -380,7 +380,7 @@
if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
dev_err(&client->dev,
"%s: could not read register %x\n",
- __FUNCTION__, probe_limits_pattern[i].reg);
+ __func__, probe_limits_pattern[i].reg);
return -EIO;
}
@@ -391,7 +391,7 @@
value < probe_limits_pattern[i].min) {
dev_dbg(&client->dev,
"%s: register=%x, lim pattern=%d, value=%d\n",
- __FUNCTION__, probe_limits_pattern[i].reg,
+ __func__, probe_limits_pattern[i].reg,
i, value);
return -ENODEV;